Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...

1 files changed, 15 insertions, 19 deletions

diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 30c4276ec882..010436795d20 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -455,23 +455,21 @@ static struct ata_port_operations ali_c5_port_ops = {
 
 static void ali_init_chipset(struct pci_dev *pdev)
 {
-        u8 rev, tmp;
+        u8 tmp;
         struct pci_dev *north, *isa_bridge;
 
-        pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
         /*
          * The chipset revision selects the driver operations and
          * mode data.
          */
 
-        if (rev >= 0x20 && rev < 0xC2) {
+        if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {
                 /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
                 pci_read_config_byte(pdev, 0x4B, &tmp);
                 /* Clear CD-ROM DMA write bit */
                 tmp &= 0x7F;
                 pci_write_config_byte(pdev, 0x4B, tmp);
-        } else if (rev >= 0xC2) {
+        } else if (pdev->revision >= 0xC2) {
                 /* Enable cable detection logic */
                 pci_read_config_byte(pdev, 0x4B, &tmp);
                 pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
@@ -483,21 +481,21 @@ static void ali_init_chipset(struct pci_dev *pdev)
                 /* Configure the ALi bridge logic. For non ALi rely on BIOS.
                    Set the south bridge enable bit */
                 pci_read_config_byte(isa_bridge, 0x79, &tmp);
-                if (rev == 0xC2)
+                if (pdev->revision == 0xC2)
                         pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
-                else if (rev > 0xC2 && rev < 0xC5)
+                else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
                         pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
         }
-        if (rev >= 0x20) {
+        if (pdev->revision >= 0x20) {
                 /*
                  * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
                  * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
                  * via 0x54/55.
                  */
                 pci_read_config_byte(pdev, 0x53, &tmp);
-                if (rev <= 0x20)
+                if (pdev->revision <= 0x20)
                         tmp &= ~0x02;
-                if (rev >= 0xc7)
+                if (pdev->revision >= 0xc7)
                         tmp |= 0x03;
                 else
                         tmp |= 0x01;    /* CD_ROM enable for DMA */
@@ -579,25 +577,23 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         };
 
         const struct ata_port_info *ppi[] = { NULL, NULL };
-        u8 rev, tmp;
+        u8 tmp;
         struct pci_dev *isa_bridge;
 
-        pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
         /*
          * The chipset revision selects the driver operations and
          * mode data.
          */
 
-        if (rev < 0x20) {
+        if (pdev->revision < 0x20) {
                 ppi[0] = &info_early;
-        } else if (rev < 0xC2) {
+        } else if (pdev->revision < 0xC2) {
                 ppi[0] = &info_20;
-        } else if (rev == 0xC2) {
+        } else if (pdev->revision == 0xC2) {
                 ppi[0] = &info_c2;
-        } else if (rev == 0xC3) {
+        } else if (pdev->revision == 0xC3) {
                 ppi[0] = &info_c3;
-        } else if (rev == 0xC4) {
+        } else if (pdev->revision == 0xC4) {
                 ppi[0] = &info_c4;
         } else
                 ppi[0] = &info_c5;
@@ -605,7 +601,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         ali_init_chipset(pdev);
 
         isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-        if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
+        if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
                 /* Are we paired with a UDMA capable chip */
                 pci_read_config_byte(isa_bridge, 0x5E, &tmp);
                 if ((tmp & 0x1E) == 0x12)