libata: factor out ata_pci_activate_sff_host() from ata_pci_one()

Factor out ata_pci_activate_sff_host() from ata_pci_one().  This does
about the same thing as ata_host_activate() but needs to be separate
because SFF controllers use different and multiple IRQs in legacy
mode.

This will be used to make SFF LLD initialization more flexible.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 103 insertions, 84 deletions

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 97dd8f2796b7..60cd4b179766 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -714,6 +714,99 @@ int ata_pci_prepare_sff_host(struct pci_dev *pdev,
 }
 
 /**
+ *      ata_pci_activate_sff_host - start SFF host, request IRQ and register it
+ *      @host: target SFF ATA host
+ *      @irq_handler: irq_handler used when requesting IRQ(s)
+ *      @sht: scsi_host_template to use when registering the host
+ *
+ *      This is the counterpart of ata_host_activate() for SFF ATA
+ *      hosts.  This separate helper is necessary because SFF hosts
+ *      use two separate interrupts in legacy mode.
+ *
+ *      LOCKING:
+ *      Inherited from calling layer (may sleep).
+ *
+ *      RETURNS:
+ *      0 on success, -errno otherwise.
+ */
+int ata_pci_activate_sff_host(struct ata_host *host,
+                              irq_handler_t irq_handler,
+                              struct scsi_host_template *sht)
+{
+        struct device *dev = host->dev;
+        struct pci_dev *pdev = to_pci_dev(dev);
+        const char *drv_name = dev_driver_string(host->dev);
+        int legacy_mode = 0, rc;
+
+        rc = ata_host_start(host);
+        if (rc)
+                return rc;
+
+        if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
+                u8 tmp8, mask;
+
+                /* TODO: What if one channel is in native mode ... */
+                pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
+                mask = (1 << 2) | (1 << 0);
+                if ((tmp8 & mask) != mask)
+                        legacy_mode = 1;
+#if defined(CONFIG_NO_ATA_LEGACY)
+                /* Some platforms with PCI limits cannot address compat
+                   port space. In that case we punt if their firmware has
+                   left a device in compatibility mode */
+                if (legacy_mode) {
+                        printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n");
+                        return -EOPNOTSUPP;
+                }
+#endif
+        }
+
+        if (!devres_open_group(dev, NULL, GFP_KERNEL))
+                return -ENOMEM;
+
+        if (!legacy_mode && pdev->irq) {
+                rc = devm_request_irq(dev, pdev->irq, irq_handler,
+                                      IRQF_SHARED, drv_name, host);
+                if (rc)
+                        goto out;
+
+                ata_port_desc(host->ports[0], "irq %d", pdev->irq);
+                ata_port_desc(host->ports[1], "irq %d", pdev->irq);
+        } else if (legacy_mode) {
+                if (!ata_port_is_dummy(host->ports[0])) {
+                        rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
+                                              irq_handler, IRQF_SHARED,
+                                              drv_name, host);
+                        if (rc)
+                                goto out;
+
+                        ata_port_desc(host->ports[0], "irq %d",
+                                      ATA_PRIMARY_IRQ(pdev));
+                }
+
+                if (!ata_port_is_dummy(host->ports[1])) {
+                        rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev),
+                                              irq_handler, IRQF_SHARED,
+                                              drv_name, host);
+                        if (rc)
+                                goto out;
+
+                        ata_port_desc(host->ports[1], "irq %d",
+                                      ATA_SECONDARY_IRQ(pdev));
+                }
+        }
+
+        rc = ata_host_register(host, sht);
+ out:
+        if (rc == 0)
+                devres_remove_group(dev, NULL);
+        else
+                devres_release_group(dev, NULL);
+
+        return rc;
+}
+
+/**
  *      ata_pci_init_one - Initialize/register PCI IDE host controller
  *      @pdev: Controller to be initialized
  *      @ppi: array of port_info, must be enough for two ports
@@ -742,9 +835,6 @@ int ata_pci_init_one(struct pci_dev *pdev,
         struct device *dev = &pdev->dev;
         const struct ata_port_info *pi = NULL;
         struct ata_host *host = NULL;
-        const char *drv_name = dev_driver_string(&pdev->dev);
-        u8 mask;
-        int legacy_mode = 0;
         int i, rc;
 
         DPRINTK("ENTER\n");
@@ -766,95 +856,24 @@ int ata_pci_init_one(struct pci_dev *pdev,
         if (!devres_open_group(dev, NULL, GFP_KERNEL))
                 return -ENOMEM;
 
-        /* FIXME: Really for ATA it isn't safe because the device may be
-           multi-purpose and we want to leave it alone if it was already
-           enabled. Secondly for shared use as Arjan says we want refcounting
-
-           Checking dev->is_enabled is insufficient as this is not set at
-           boot for the primary video which is BIOS enabled
-          */
-
         rc = pcim_enable_device(pdev);
         if (rc)
-                goto err_out;
+                goto out;
 
-        if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
-                u8 tmp8;
-
-                /* TODO: What if one channel is in native mode ... */
-                pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
-                mask = (1 << 2) | (1 << 0);
-                if ((tmp8 & mask) != mask)
-                        legacy_mode = 1;
-#if defined(CONFIG_NO_ATA_LEGACY)
-                /* Some platforms with PCI limits cannot address compat
-                   port space. In that case we punt if their firmware has
-                   left a device in compatibility mode */
-                if (legacy_mode) {
-                        printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n");
-                        rc = -EOPNOTSUPP;
-                        goto err_out;
-                }
-#endif
-        }
-
-        /* prepare host */
+        /* prepare and activate SFF host */
         rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
         if (rc)
-                goto err_out;
+                goto out;
 
         pci_set_master(pdev);
+        rc = ata_pci_activate_sff_host(host, pi->port_ops->irq_handler,
+                                       pi->sht);
+ out:
+        if (rc == 0)
+                devres_remove_group(&pdev->dev, NULL);
+        else
+                devres_release_group(&pdev->dev, NULL);
 
-        /* start host and request IRQ */
-        rc = ata_host_start(host);
-        if (rc)
-                goto err_out;
-
-        if (!legacy_mode && pdev->irq) {
-                /* We may have no IRQ assigned in which case we can poll. This
-                   shouldn't happen on a sane system but robustness is cheap
-                   in this case */
-                rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
-                                      IRQF_SHARED, drv_name, host);
-                if (rc)
-                        goto err_out;
-
-                ata_port_desc(host->ports[0], "irq %d", pdev->irq);
-                ata_port_desc(host->ports[1], "irq %d", pdev->irq);
-        } else if (legacy_mode) {
-                if (!ata_port_is_dummy(host->ports[0])) {
-                        rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
-                                              pi->port_ops->irq_handler,
-                                              IRQF_SHARED, drv_name, host);
-                        if (rc)
-                                goto err_out;
-
-                        ata_port_desc(host->ports[0], "irq %d",
-                                      ATA_PRIMARY_IRQ(pdev));
-                }
-
-                if (!ata_port_is_dummy(host->ports[1])) {
-                        rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev),
-                                              pi->port_ops->irq_handler,
-                                              IRQF_SHARED, drv_name, host);
-                        if (rc)
-                                goto err_out;
-
-                        ata_port_desc(host->ports[1], "irq %d",
-                                      ATA_SECONDARY_IRQ(pdev));
-                }
-        }
-
-        /* register */
-        rc = ata_host_register(host, pi->sht);
-        if (rc)
-                goto err_out;
-
-        devres_remove_group(dev, NULL);
-        return 0;
-
-err_out:
-        devres_release_group(dev, NULL);
         return rc;
 }