libahci: fix result_tf handling after an ATA PIO data-in command

ATA devices don't send D2H Reg FIS after an successful ATA PIO data-in
command.  The host is supposed to take the TF and E_Status of the
preceding PIO Setup FIS.  Update ahci_qc_fill_rtf() such that it takes
TF + E_Status from PIO Setup FIS after a successful ATA PIO data-in
command.

Without this patch, result_tf for such a command is filled with the
content of the previous D2H Reg FIS which belongs to a previous
command, which can make the command incorrectly seen as failed.

* Patch updated to grab the whole TF + E_Status from PIO Setup FIS
  instead of just E_Status as suggested by Robert Hancock.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mark Lord <kernel@teksavvy.com>
Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 1 insertions, 0 deletions

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 1a2aacfdebc5..329cbbb91284 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -72,6 +72,7 @@ enum {
         AHCI_CMD_RESET          = (1 << 8),
         AHCI_CMD_CLR_BUSY       = (1 << 10),
 
+        RX_FIS_PIO_SETUP        = 0x20, /* offset of PIO Setup FIS data */
         RX_FIS_D2H_REG          = 0x40, /* offset of D2H Register FIS data */
         RX_FIS_SDB              = 0x58, /* offset of SDB FIS data */
         RX_FIS_UNK              = 0x60, /* offset of Unknown FIS data */