Pull thermal into release branch

1 files changed, 40 insertions, 7 deletions

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 1e06159fd9c4..7e8f48b7f9af 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -77,23 +77,27 @@ MODULE_LICENSE("GPL");
 
 static int act;
 module_param(act, int, 0644);
-MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.\n");
+MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
+
+static int crt;
+module_param(crt, int, 0644);
+MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
 
 static int tzp;
 module_param(tzp, int, 0444);
-MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.\n");
+MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
 
 static int nocrt;
 module_param(nocrt, int, 0);
-MODULE_PARM_DESC(nocrt, "Set to disable action on ACPI thermal zone critical and hot trips.\n");
+MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points.");
 
 static int off;
 module_param(off, int, 0);
-MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.\n");
+MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.");
 
 static int psv;
 module_param(psv, int, 0644);
-MODULE_PARM_DESC(psv, "Disable or override all passive trip points.\n");
+MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
 
 static int acpi_thermal_add(struct acpi_device *device);
 static int acpi_thermal_remove(struct acpi_device *device, int type);
@@ -340,6 +344,20 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
                                   tz->trips.critical.temperature));
         }
 
+        if (tz->trips.critical.flags.valid == 1) {
+                if (crt == -1) {
+                        tz->trips.critical.flags.valid = 0;
+                } else if (crt > 0) {
+                        unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
+
+                        /*
+                         * Allow override to lower critical threshold
+                         */
+                        if (crt_k < tz->trips.critical.temperature)
+                                tz->trips.critical.temperature = crt_k;
+                }
+        }
+
         /* Critical Sleep (optional) */
 
         status =
@@ -1067,9 +1085,9 @@ static int acpi_thermal_add_fs(struct acpi_device *device)
                 entry->owner = THIS_MODULE;
         }
 
-        /* 'trip_points' [R/W] */
+        /* 'trip_points' [R] */
         entry = create_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS,
-                                  S_IFREG | S_IRUGO | S_IWUSR,
+                                  S_IRUGO,
                                   acpi_device_dir(device));
         if (!entry)
                 return -ENODEV;
@@ -1339,6 +1357,13 @@ static int thermal_act(struct dmi_system_id *d) {
         }
         return 0;
 }
+static int thermal_nocrt(struct dmi_system_id *d) {
+
+        printk(KERN_NOTICE "ACPI: %s detected: "
+                "disabling all critical thermal trip point actions.\n", d->ident);
+        nocrt = 1;
+        return 0;
+}
 static int thermal_tzp(struct dmi_system_id *d) {
 
         if (tzp == 0) {
@@ -1387,6 +1412,14 @@ static struct dmi_system_id thermal_dmi_table[] __initdata = {
                 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
                 },
         },
+        {
+         .callback = thermal_nocrt,
+         .ident = "Gigabyte GA-7ZX",
+         .matches = {
+                DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
+                DMI_MATCH(DMI_BOARD_NAME, "7ZX"),
+                },
+        },
         {}
 };
 #endif /* CONFIG_DMI */