ACPI: thermal: add DMI hooks to handle AOpen's broken Award BIOS

Use DMI to:
1. enable polling (BIOS thermal events are broken)
2. disable active trip points (BIOS fan control is broken)
3. disable passive trip point (BIOS hard-codes it too low)

The actual temperature reading does work,
and with the aid of polling, the critical
trip point should work too.

http://bugzilla.kernel.org/show_bug.cgi?id=8842

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 65 insertions, 0 deletions

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 3521c37bbd33..1e06159fd9c4 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -33,6 +33,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/dmi.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/proc_fs.h>
@@ -1328,10 +1329,74 @@ static int acpi_thermal_resume(struct acpi_device *device)
         return AE_OK;
 }
 
+#ifdef CONFIG_DMI
+static int thermal_act(struct dmi_system_id *d) {
+
+        if (act == 0) {
+                printk(KERN_NOTICE "ACPI: %s detected: "
+                        "disabling all active thermal trip points\n", d->ident);
+                act = -1;
+        }
+        return 0;
+}
+static int thermal_tzp(struct dmi_system_id *d) {
+
+        if (tzp == 0) {
+                printk(KERN_NOTICE "ACPI: %s detected: "
+                        "enabling thermal zone polling\n", d->ident);
+                tzp = 300;      /* 300 dS = 30 Seconds */
+        }
+        return 0;
+}
+static int thermal_psv(struct dmi_system_id *d) {
+
+        if (psv == 0) {
+                printk(KERN_NOTICE "ACPI: %s detected: "
+                        "disabling all passive thermal trip points\n", d->ident);
+                psv = -1;
+        }
+        return 0;
+}
+
+static struct dmi_system_id thermal_dmi_table[] __initdata = {
+        /*
+         * Award BIOS on this AOpen makes thermal control almost worthless.
+         * http://bugzilla.kernel.org/show_bug.cgi?id=8842
+         */
+        {
+         .callback = thermal_act,
+         .ident = "AOpen i915GMm-HFS",
+         .matches = {
+                DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+                DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+                },
+        },
+        {
+         .callback = thermal_psv,
+         .ident = "AOpen i915GMm-HFS",
+         .matches = {
+                DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+                DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+                },
+        },
+        {
+         .callback = thermal_tzp,
+         .ident = "AOpen i915GMm-HFS",
+         .matches = {
+                DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+                DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+                },
+        },
+        {}
+};
+#endif /* CONFIG_DMI */
+
 static int __init acpi_thermal_init(void)
 {
         int result = 0;
 
+        dmi_check_system(thermal_dmi_table);
+
         if (off) {
                 printk(KERN_NOTICE "ACPI: thermal control disabled\n");
                 return -ENODEV;