ACPICA: Introduce acpi_gpe_wakeup()

ACPICA uses reference counters to avoid disabling GPEs too early in
case they have been enabled for many times.  This is done separately
for runtime and for wakeup, but the wakeup GPE reference counter is
not really necessary, because GPEs are only enabled to wake up the
system at the hardware level by acpi_enter_sleep_state().  Thus it
only is necessary to set the corresponding bits in the wakeup enable
masks of these GPEs' registers right before the system enters a sleep
state.  Moreover, the GPE wakeup enable bits can only be set when the
target sleep state of the system is known and they need to be cleared
immediately after wakeup regardless of how many wakeup devices are
associated with a given GPE.

On the basis of the above observations, introduce function
acpi_gpe_wakeup() to be used for setting or clearing the enable bit
corresponding to a given GPE in its enable register's enable_for_wake
mask.  Modify the ACPI suspend and wakeup code the use
acpi_gpe_wakeup() instead of acpi_{enable|disable}_gpe() to set
and clear GPE enable bits in their registers' enable_for_wake masks
during system transitions to a sleep state and back to the working
state, respectively.  [This will allow us to drop the third
argument of acpi_{enable|disable}_gpe() and simplify the GPE
handling code.]

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 3 insertions, 12 deletions

diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 5b7c52e4a00f..aaa1af55e280 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -664,18 +664,9 @@ int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
                 return -ENODEV;
         }
 
-        if (enable) {
-                error = acpi_enable_wakeup_device_power(adev,
-                                                acpi_target_sleep_state);
-                if (!error)
-                        acpi_enable_gpe(adev->wakeup.gpe_device,
-                                        adev->wakeup.gpe_number,
-                                        ACPI_GPE_TYPE_WAKE);
-        } else {
-                acpi_disable_gpe(adev->wakeup.gpe_device, adev->wakeup.gpe_number,
-                                ACPI_GPE_TYPE_WAKE);
-                error = acpi_disable_wakeup_device_power(adev);
-        }
+        error = enable ?
+                acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
+                acpi_disable_wakeup_device_power(adev);
         if (!error)
                 dev_info(dev, "wake-up capability %s by ACPI\n",
                                 enable ? "enabled" : "disabled");