Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 336 insertions, 0 deletions

diff --git a/drivers/acpi/executer/exoparg6.c b/drivers/acpi/executer/exoparg6.c
new file mode 100644
index 000000000000..d32624331626
--- /dev/null
+++ b/drivers/acpi/executer/exoparg6.c
@@ -0,0 +1,336 @@
+
+/******************************************************************************
+ *
+ * Module Name: exoparg6 - AML execution - opcodes with 6 arguments
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+         ACPI_MODULE_NAME    ("exoparg6")
+
+
+/*!
+ * Naming convention for AML interpreter execution routines.
+ *
+ * The routines that begin execution of AML opcodes are named with a common
+ * convention based upon the number of arguments, the number of target operands,
+ * and whether or not a value is returned:
+ *
+ *      AcpiExOpcode_xA_yT_zR
+ *
+ * Where:
+ *
+ * xA - ARGUMENTS:    The number of arguments (input operands) that are
+ *                    required for this opcode type (1 through 6 args).
+ * yT - TARGETS:      The number of targets (output operands) that are required
+ *                    for this opcode type (0, 1, or 2 targets).
+ * zR - RETURN VALUE: Indicates whether this opcode type returns a value
+ *                    as the function return (0 or 1).
+ *
+ * The AcpiExOpcode* functions are called via the Dispatcher component with
+ * fully resolved operands.
+!*/
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_do_match
+ *
+ * PARAMETERS:  match_op        - The AML match operand
+ *              package_obj     - Object from the target package
+ *              match_obj       - Object to be matched
+ *
+ * RETURN:      TRUE if the match is successful, FALSE otherwise
+ *
+ * DESCRIPTION: Implements the low-level match for the ASL Match operator.
+ *              Package elements will be implicitly converted to the type of
+ *              the match object (Integer/Buffer/String).
+ *
+ ******************************************************************************/
+
+u8
+acpi_ex_do_match (
+        u32                             match_op,
+        union acpi_operand_object       *package_obj,
+        union acpi_operand_object       *match_obj)
+{
+        u8                              logical_result = TRUE;
+        acpi_status                     status;
+
+
+        /*
+         * Note: Since the package_obj/match_obj ordering is opposite to that of
+         * the standard logical operators, we have to reverse them when we call
+         * do_logical_op in order to make the implicit conversion rules work
+         * correctly. However, this means we have to flip the entire equation
+         * also. A bit ugly perhaps, but overall, better than fussing the
+         * parameters around at runtime, over and over again.
+         *
+         * Below, P[i] refers to the package element, M refers to the Match object.
+         */
+        switch (match_op) {
+        case MATCH_MTR:
+
+                /* Always true */
+
+                break;
+
+        case MATCH_MEQ:
+
+                /*
+                 * True if equal: (P[i] == M)
+                 * Change to:     (M == P[i])
+                 */
+                status = acpi_ex_do_logical_op (AML_LEQUAL_OP, match_obj, package_obj,
+                                 &logical_result);
+                if (ACPI_FAILURE (status)) {
+                        return (FALSE);
+                }
+                break;
+
+        case MATCH_MLE:
+
+                /*
+                 * True if less than or equal: (P[i] <= M) (P[i] not_greater than M)
+                 * Change to:                  (M >= P[i]) (M not_less than P[i])
+                 */
+                status = acpi_ex_do_logical_op (AML_LLESS_OP, match_obj, package_obj,
+                                 &logical_result);
+                if (ACPI_FAILURE (status)) {
+                        return (FALSE);
+                }
+                logical_result = (u8) !logical_result;
+                break;
+
+        case MATCH_MLT:
+
+                /*
+                 * True if less than: (P[i] < M)
+                 * Change to:         (M > P[i])
+                 */
+                status = acpi_ex_do_logical_op (AML_LGREATER_OP, match_obj, package_obj,
+                                 &logical_result);
+                if (ACPI_FAILURE (status)) {
+                        return (FALSE);
+                }
+                break;
+
+        case MATCH_MGE:
+
+                /*
+                 * True if greater than or equal: (P[i] >= M) (P[i] not_less than M)
+                 * Change to:                     (M <= P[i]) (M not_greater than P[i])
+                 */
+                status = acpi_ex_do_logical_op (AML_LGREATER_OP, match_obj, package_obj,
+                                 &logical_result);
+                if (ACPI_FAILURE (status)) {
+                        return (FALSE);
+                }
+                logical_result = (u8)!logical_result;
+                break;
+
+        case MATCH_MGT:
+
+                /*
+                 * True if greater than: (P[i] > M)
+                 * Change to:            (M < P[i])
+                 */
+                status = acpi_ex_do_logical_op (AML_LLESS_OP, match_obj, package_obj,
+                                 &logical_result);
+                if (ACPI_FAILURE (status)) {
+                        return (FALSE);
+                }
+                break;
+
+        default:
+
+                /* Undefined */
+
+                return (FALSE);
+        }
+
+        return logical_result;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_6A_0T_1R
+ *
+ * PARAMETERS:  walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with 6 arguments, no target, and a return value
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_6A_0T_1R (
+        struct acpi_walk_state          *walk_state)
+{
+        union acpi_operand_object       **operand = &walk_state->operands[0];
+        union acpi_operand_object       *return_desc = NULL;
+        acpi_status                     status = AE_OK;
+        u32                             index;
+        union acpi_operand_object       *this_element;
+
+
+        ACPI_FUNCTION_TRACE_STR ("ex_opcode_6A_0T_1R", acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+        switch (walk_state->opcode) {
+        case AML_MATCH_OP:
+                /*
+                 * Match (search_pkg[0], match_op1[1], match_obj1[2],
+                 *                      match_op2[3], match_obj2[4], start_index[5])
+                 */
+
+                /* Validate both Match Term Operators (MTR, MEQ, etc.) */
+
+                if ((operand[1]->integer.value > MAX_MATCH_OPERATOR) ||
+                        (operand[3]->integer.value > MAX_MATCH_OPERATOR)) {
+                        ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Match operator out of range\n"));
+                        status = AE_AML_OPERAND_VALUE;
+                        goto cleanup;
+                }
+
+                /* Get the package start_index, validate against the package length */
+
+                index = (u32) operand[5]->integer.value;
+                if (index >= (u32) operand[0]->package.count) {
+                        ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Index beyond package end\n"));
+                        status = AE_AML_PACKAGE_LIMIT;
+                        goto cleanup;
+                }
+
+                /* Create an integer for the return value */
+
+                return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+                if (!return_desc) {
+                        status = AE_NO_MEMORY;
+                        goto cleanup;
+
+                }
+
+                /* Default return value if no match found */
+
+                return_desc->integer.value = ACPI_INTEGER_MAX;
+
+                /*
+                 * Examine each element until a match is found. Both match conditions
+                 * must be satisfied for a match to occur. Within the loop,
+                 * "continue" signifies that the current element does not match
+                 * and the next should be examined.
+                 *
+                 * Upon finding a match, the loop will terminate via "break" at
+                 * the bottom.  If it terminates "normally", match_value will be
+                 * ACPI_INTEGER_MAX (Ones) (its initial value) indicating that no
+                 * match was found.
+                 */
+                for ( ; index < operand[0]->package.count; index++) {
+                        /* Get the current package element */
+
+                        this_element = operand[0]->package.elements[index];
+
+                        /* Treat any uninitialized (NULL) elements as non-matching */
+
+                        if (!this_element) {
+                                continue;
+                        }
+
+                        /*
+                         * Both match conditions must be satisfied. Execution of a continue
+                         * (proceed to next iteration of enclosing for loop) signifies a
+                         * non-match.
+                         */
+                        if (!acpi_ex_do_match ((u32) operand[1]->integer.value,
+                                           this_element, operand[2])) {
+                                continue;
+                        }
+
+                        if (!acpi_ex_do_match ((u32) operand[3]->integer.value,
+                                           this_element, operand[4])) {
+                                continue;
+                        }
+
+                        /* Match found: Index is the return value */
+
+                        return_desc->integer.value = index;
+                        break;
+                }
+                break;
+
+
+        case AML_LOAD_TABLE_OP:
+
+                status = acpi_ex_load_table_op (walk_state, &return_desc);
+                break;
+
+
+        default:
+
+                ACPI_REPORT_ERROR (("acpi_ex_opcode_3A_0T_0R: Unknown opcode %X\n",
+                                walk_state->opcode));
+                status = AE_AML_BAD_OPCODE;
+                goto cleanup;
+        }
+
+
+        walk_state->result_obj = return_desc;
+
+
+cleanup:
+
+        /* Delete return object on error */
+
+        if (ACPI_FAILURE (status)) {
+                acpi_ut_remove_reference (return_desc);
+        }
+
+        return_ACPI_STATUS (status);
+}