ARM: kirkwood: remove support for legacy booting of Sheevaplug

The Kirkwood Sheevaplug platform has already been converted to the
Device Tree, so we can remove the legacy booting option for this
platform.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

3 files changed, 0 insertions, 177 deletions

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 4bf2737e6cee..329c9ce4f959 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -12,13 +12,6 @@ config MACH_D2NET_V2
           Say 'Y' here if you want your kernel to support the
           LaCie d2 Network v2 NAS.
 
-config MACH_ESATA_SHEEVAPLUG
-        bool "Marvell eSATA SheevaPlug Reference Board"
-        select KIRKWOOD_LEGACY
-        help
-          Say 'Y' here if you want your kernel to support the
-          Marvell eSATA SheevaPlug Reference Board.
-
 config MACH_INETSPACE_V2
         bool "LaCie Internet Space v2 NAS Board"
         select KIRKWOOD_LEGACY
@@ -100,13 +93,6 @@ config MACH_RD88F6281
           Say 'Y' here if you want your kernel to support the
           Marvell RD-88F6281 Reference Board.
 
-config MACH_SHEEVAPLUG
-        bool "Marvell SheevaPlug Reference Board"
-        select KIRKWOOD_LEGACY
-        help
-          Say 'Y' here if you want your kernel to support the
-          Marvell SheevaPlug Reference Board.
-
 config MACH_T5325
         bool "HP t5325 Thin Client"
         select KIRKWOOD_LEGACY
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 3c748ea1585b..4bd5602d1932 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,7 +1,6 @@
 obj-y                           += common.o pcie.o
 obj-$(CONFIG_KIRKWOOD_LEGACY)   += irq.o mpp.o
 obj-$(CONFIG_MACH_D2NET_V2)             += d2net_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)     += sheevaplug-setup.o
 obj-$(CONFIG_MACH_INETSPACE_V2)         += netspace_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)      += mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_NET2BIG_V2)           += netxbig_v2-setup.o lacie_v2-common.o
@@ -11,7 +10,6 @@ obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_OPENRD)               += openrd-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)        += rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)            += rd88f6281-setup.o
-obj-$(CONFIG_MACH_SHEEVAPLUG)           += sheevaplug-setup.o
 obj-$(CONFIG_MACH_T5325)                += t5325-setup.o
 obj-$(CONFIG_MACH_TS219)                += ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)                += ts41x-setup.o tsx1x-common.o
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
deleted file mode 100644
index 55b68fa39f45..000000000000
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/sheevaplug-setup.c
- *
- * Marvell SheevaPlug Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition sheevaplug_nand_parts[] = {
-        {
-                .name = "u-boot",
-                .offset = 0,
-                .size = SZ_1M
-        }, {
-                .name = "uImage",
-                .offset = MTDPART_OFS_NXTBLK,
-                .size = SZ_4M
-        }, {
-                .name = "root",
-                .offset = MTDPART_OFS_NXTBLK,
-                .size = MTDPART_SIZ_FULL
-        },
-};
-
-static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data sheeva_esata_sata_data = {
-        .n_ports        = 2,
-};
-
-static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
-        /* unfortunately the CD signal has not been connected */
-};
-
-static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
-        .gpio_write_protect = 44, /* MPP44 used as SD write protect */
-        .gpio_card_detect = 47,   /* MPP47 used as SD card detect */
-};
-
-static struct gpio_led sheevaplug_led_pins[] = {
-        {
-                .name                   = "plug:red:misc",
-                .default_trigger        = "none",
-                .gpio                   = 46,
-                .active_low             = 1,
-        },
-        {
-                .name                   = "plug:green:health",
-                .default_trigger        = "default-on",
-                .gpio                   = 49,
-                .active_low             = 1,
-        },
-};
-
-static struct gpio_led_platform_data sheevaplug_led_data = {
-        .leds           = sheevaplug_led_pins,
-        .num_leds       = ARRAY_SIZE(sheevaplug_led_pins),
-};
-
-static struct platform_device sheevaplug_leds = {
-        .name   = "leds-gpio",
-        .id     = -1,
-        .dev    = {
-                .platform_data  = &sheevaplug_led_data,
-        }
-};
-
-static unsigned int sheevaplug_mpp_config[] __initdata = {
-        MPP29_GPIO,     /* USB Power Enable */
-        MPP46_GPIO,     /* LED Red */
-        MPP49_GPIO,     /* LED */
-        0
-};
-
-static unsigned int sheeva_esata_mpp_config[] __initdata = {
-        MPP29_GPIO,     /* USB Power Enable */
-        MPP44_GPIO,     /* SD Write Protect */
-        MPP47_GPIO,     /* SD Card Detect */
-        MPP49_GPIO,     /* LED Green */
-        0
-};
-
-static void __init sheevaplug_init(void)
-{
-        /*
-         * Basic setup. Needs to be called early.
-         */
-        kirkwood_init();
-
-        /* setup gpio pin select */
-        if (machine_is_esata_sheevaplug())
-                kirkwood_mpp_conf(sheeva_esata_mpp_config);
-        else
-                kirkwood_mpp_conf(sheevaplug_mpp_config);
-
-        kirkwood_uart0_init();
-        kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
-
-        if (gpio_request(29, "USB Power Enable") != 0 ||
-            gpio_direction_output(29, 1) != 0)
-                pr_err("can't set up GPIO 29 (USB Power Enable)\n");
-        kirkwood_ehci_init();
-
-        kirkwood_ge00_init(&sheevaplug_ge00_data);
-
-        /* honor lower power consumption for plugs with out eSATA */
-        if (machine_is_esata_sheevaplug())
-                kirkwood_sata_init(&sheeva_esata_sata_data);
-
-        /* enable sd wp and sd cd on plugs with esata */
-        if (machine_is_esata_sheevaplug())
-                kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
-        else
-                kirkwood_sdio_init(&sheevaplug_mvsdio_data);
-
-        platform_device_register(&sheevaplug_leds);
-}
-
-#ifdef CONFIG_MACH_SHEEVAPLUG
-MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
-        /* Maintainer: shadi Ammouri <shadi@marvell.com> */
-        .atag_offset    = 0x100,
-        .init_machine   = sheevaplug_init,
-        .map_io         = kirkwood_map_io,
-        .init_early     = kirkwood_init_early,
-        .init_irq       = kirkwood_init_irq,
-        .init_time      = kirkwood_timer_init,
-        .restart        = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
-MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
-        .atag_offset    = 0x100,
-        .init_machine   = sheevaplug_init,
-        .map_io         = kirkwood_map_io,
-        .init_early     = kirkwood_init_early,
-        .init_irq       = kirkwood_init_irq,
-        .init_time      = kirkwood_timer_init,
-        .restart        = kirkwood_restart,
-MACHINE_END
-#endif