Merge 3.4-rc4 into tty-next

This resolves the merge problem with:
	drivers/tty/serial/pch_uart.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 files changed, 9 insertions, 9 deletions

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 9fc2f44188cb..de74e05dd929 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -245,14 +245,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
         omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
         omap_up.autosuspend_timeout = info->autosuspend_timeout;
 
-        /* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */
-        if (!cpu_is_omap2420() && !cpu_is_ti816x())
-                omap_up.errata |= UART_ERRATA_i202_MDR1_ACCESS;
-
-        /* Enable DMA Mode Force Idle Errata i291 for omap34xx/3630 */
-        if (cpu_is_omap34xx() || cpu_is_omap3630())
-                omap_up.errata |= UART_ERRATA_i291_DMA_FORCEIDLE;
-
         pdata = &omap_up;
         pdata_size = sizeof(struct omap_uart_port_info);
 
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index c00aadb01e09..222182e00226 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/of_serial.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/pda_power.h>
@@ -52,6 +53,7 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
                 .irq            = INT_UARTD,
                 .flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
                 .type           = PORT_TEGRA,
+                .handle_break   = tegra_serial_handle_break,
                 .iotype         = UPIO_MEM,
                 .regshift       = 2,
                 .uartclk        = 216000000,
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 330afdfa2475..d0735c70d688 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/of_serial.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/gpio_keys.h>
@@ -55,6 +56,7 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
                 .irq            = INT_UARTA,
                 .flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
                 .type           = PORT_TEGRA,
+                .handle_break   = tegra_serial_handle_break,
                 .iotype         = UPIO_MEM,
                 .regshift       = 2,
                 .uartclk        = 216000000,
@@ -65,6 +67,7 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
                 .irq            = INT_UARTC,
                 .flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
                 .type           = PORT_TEGRA,
+                .handle_break   = tegra_serial_handle_break,
                 .iotype         = UPIO_MEM,
                 .regshift       = 2,
                 .uartclk        = 216000000,
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index d669847f0485..5b687b8258c0 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/of_serial.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/input.h>
@@ -47,6 +48,7 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
                 /* Memory and IRQ filled in before registration */
                 .flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
                 .type           = PORT_TEGRA,
+                .handle_break   = tegra_serial_handle_break,
                 .iotype         = UPIO_MEM,
                 .regshift       = 2,
                 .uartclk        = 216000000,
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index cd52820a3e37..f7358586b523 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/of_serial.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
@@ -48,6 +49,7 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
                 .irq            = INT_UARTA,
                 .flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
                 .type           = PORT_TEGRA,
+                .handle_break   = tegra_serial_handle_break,
                 .iotype         = UPIO_MEM,
                 .regshift       = 2,
                 .uartclk        = 216000000,
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 9ff444469f3d..1a52725ffcf2 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -65,7 +65,6 @@ struct omap_uart_port_info {
         bool                    dma_enabled;    /* To specify DMA Mode */
         unsigned int            uartclk;        /* UART clock rate */
         upf_t                   flags;          /* UPF_* flags */
-        u32                     errata;
         unsigned int            dma_rx_buf_size;
         unsigned int            dma_rx_timeout;
         unsigned int            autosuspend_timeout;