MIPS: Netlogic: SMP wakeup code update

Update for core intialization code.  Initialize status register
after receiving NMI for CPU wakeup. Add the low level L1D flush
code before enabling threads in core.

Also convert the ehb to _ehb so that it works under more GCC
versions.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3755/
Patchwork: https://patchwork.linux-mips.org/patch/4095/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

2 files changed, 45 insertions, 6 deletions

diff --git a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
index bf7d41deb9be..7b63a6b722a0 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
@@ -47,7 +47,9 @@
 #define CPU_BLOCKID_MAP         10
 
 #define LSU_DEFEATURE           0x304
-#define LSU_CERRLOG_REGID       0x09
+#define LSU_DEBUG_ADDR          0x305
+#define LSU_DEBUG_DATA0         0x306
+#define LSU_CERRLOG_REGID       0x309
 #define SCHED_DEFEATURE         0x700
 
 /* Offsets of interest from the 'MAP' Block */
diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
index c4872a714cfe..d6431b7b49fc 100644
--- a/arch/mips/netlogic/common/smpboot.S
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -80,6 +80,38 @@
  * This is the code that will be copied to the reset entry point for
  * XLR and XLP. The XLP cores start here when they are woken up. This
  * is also the NMI entry point.
+ */
+.macro  xlp_flush_l1_dcache
+        li      t0, LSU_DEBUG_DATA0
+        li      t1, LSU_DEBUG_ADDR
+        li      t2, 0           /* index */
+        li      t3, 0x1000      /* loop count */
+1:
+        sll     v0, t2, 5
+        mtcr    zero, t0
+        ori     v1, v0, 0x3     /* way0 | write_enable | write_active */
+        mtcr    v1, t1
+2:
+        mfcr    v1, t1
+        andi    v1, 0x1         /* wait for write_active == 0 */
+        bnez    v1, 2b
+        nop
+        mtcr    zero, t0
+        ori     v1, v0, 0x7     /* way1 | write_enable | write_active */
+        mtcr    v1, t1
+3:
+        mfcr    v1, t1
+        andi    v1, 0x1         /* wait for write_active == 0 */
+        bnez    v1, 3b
+        nop
+        addi    t2, 1
+        bne     t3, t2, 1b
+        nop
+.endm
+
+/*
+ * The cores can come start when they are woken up. This is also the NMI
+ * entry, so check that first.
  *
  * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS
  * location, this will have the thread mask (used when core is woken up)
@@ -138,6 +170,8 @@ FEXPORT(nlm_reset_entry)
  * a core.
  */
 EXPORT(nlm_boot_siblings)
+        /* core L1D flush before enable threads */
+        xlp_flush_l1_dcache
         /* Enable hw threads by writing to MAP_THREADMODE of the core */
         li      t0, CKSEG1ADDR(RESET_DATA_PHYS)
         lw      t1, BOOT_THREAD_MODE(t0)        /* t1 <- thread mode */
@@ -164,16 +198,13 @@ EXPORT(nlm_boot_siblings)
         li      t0, MMU_SETUP
         li      t1, 0
         mtcr    t1, t0
-        ehb
+        _ehb
 
 2:      beqz    v0, 4f          /* boot cpu (cpuid == 0)? */
         nop
 
         /* setup status reg */
-        mfc0    t1, CP0_STATUS
-        li      t0, ST0_BEV
-        or      t1, t0
-        xor     t1, t0
+        move    t1, zero
 #ifdef CONFIG_64BIT
         ori     t1, ST0_KX
 #endif
@@ -220,6 +251,12 @@ FEXPORT(xlp_boot_core0_siblings)	/* "Master" cpu starts from here */
 
         __CPUINIT
 NESTED(nlm_boot_secondary_cpus, 16, sp)
+        /* Initialize CP0 Status */
+        move    t1, zero
+#ifdef CONFIG_64BIT
+        ori     t1, ST0_KX
+#endif
+        mtc0    t1, CP0_STATUS
         PTR_LA  t1, nlm_next_sp
         PTR_L   sp, 0(t1)
         PTR_LA  t1, nlm_next_gp