Merge master.kernel.org:/home/rmk/linux-2.6-arm

Manual conflict merge of arch/arm/Kconfig

30 files changed, 273 insertions, 70 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4a63a8e2e452..15dc1a0dffbb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -10,9 +10,9 @@ config ARM
         default y
         help
           The ARM series is a line of low-power-consumption RISC chip designs
-          licensed by ARM ltd and targeted at embedded applications and
+          licensed by ARM Ltd and targeted at embedded applications and
           handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
-          manufactured, but  legacy ARM-based PC hardware remains popular in
+          manufactured, but legacy ARM-based PC hardware remains popular in
           Europe.  There is an ARM Linux project with a web page at
           <http://www.arm.linux.org.uk/>.
 
@@ -84,45 +84,62 @@ config ARCH_CLPS7500
         bool "Cirrus-CL-PS7500FE"
         select TIMER_ACORN
         select ISA
+        help
+          Support for the Cirrus Logic PS7500FE system-on-a-chip.
 
 config ARCH_CLPS711X
         bool "CLPS711x/EP721x-based"
+        help
+          Support for Cirrus Logic 711x/721x based boards.
 
 config ARCH_CO285
         bool "Co-EBSA285"
         select FOOTBRIDGE
         select FOOTBRIDGE_ADDIN
+        help
+          Support for Intel's EBSA285 companion chip.
 
 config ARCH_EBSA110
         bool "EBSA-110"
         select ISA
         help
           This is an evaluation board for the StrongARM processor available
-          from Digital. It has limited hardware on-board, including an onboard
+          from Digital. It has limited hardware on-board, including an
           Ethernet interface, two PCMCIA sockets, two serial ports and a
           parallel port.
 
 config ARCH_FOOTBRIDGE
         bool "FootBridge"
         select FOOTBRIDGE
+        help
+          Support for systems based on the DC21285 companion chip
+          ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
 config ARCH_INTEGRATOR
         bool "Integrator"
         select ARM_AMBA
         select ICST525
+        help
+          Support for ARM's Integrator platform.
 
 config ARCH_IOP3XX
         bool "IOP3xx-based"
         select PCI
+        help
+          Support for Intel's IOP3XX (XScale) family of processors.
 
 config ARCH_IXP4XX
         bool "IXP4xx-based"
         select DMABOUNCE
         select PCI
+        help
+          Support for Intel's IXP4XX (XScale) family of processors.
 
 config ARCH_IXP2000
         bool "IXP2400/2800-based"
         select PCI
+        help
+          Support for Intel's IXP2400/2800 (XScale) family of processors.
 
 config ARCH_L7200
         bool "LinkUp-L7200"
@@ -140,6 +157,8 @@ config ARCH_L7200
 config ARCH_PXA
         bool "PXA2xx-based"
         select ARCH_MTD_XIP
+        help
+          Support for Intel's PXA2XX processor line.
 
 config ARCH_RPC
         bool "RiscPC"
@@ -157,19 +176,24 @@ config ARCH_SA1100
         select ISA
         select ARCH_DISCONTIGMEM_ENABLE
         select ARCH_MTD_XIP
+        help
+          Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
         bool "Samsung S3C2410"
         help
           Samsung S3C2410X CPU based systems, such as the Simtec Electronics
           BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
-          the Samsung SMDK2410 development board (and derviatives).
+          the Samsung SMDK2410 development board (and derivatives).
 
 config ARCH_SHARK
         bool "Shark"
         select ISA
         select ISA_DMA
         select PCI
+        help
+          Support for the StrongARM based Digital DNARD machine, also known
+          as "Shark" (<http://www.shark-linux.de/shark.html>).
 
 config ARCH_LH7A40X
         bool "Sharp LH7A40X"
@@ -181,6 +205,8 @@ config ARCH_LH7A40X
 
 config ARCH_OMAP
         bool "TI OMAP"
+        help
+          Support for TI's OMAP platform (OMAP1 and OMAP2).
 
 config ARCH_VERSATILE
         bool "Versatile"
@@ -199,6 +225,8 @@ config ARCH_REALVIEW
 
 config ARCH_IMX
         bool "IMX"
+        help
+          Support for Motorola's i.MX family of processors (MX1, MXL).
 
 config ARCH_H720X
         bool "Hynix-HMS720x-based"
@@ -215,8 +243,8 @@ config ARCH_AAEC2000
 config ARCH_AT91RM9200
         bool "AT91RM9200"
         help
-          Say Y here if you intend to run this kernel on an AT91RM9200-based
-          board.
+          Say Y here if you intend to run this kernel on an Atmel
+          AT91RM9200-based board.
 
 endchoice
 
@@ -422,8 +450,8 @@ config AEABI
           To use this you need GCC version 4.0.0 or later.
 
 config OABI_COMPAT
-        bool "Allow old ABI binaries to run with this kernel"
-        depends on AEABI
+        bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
+        depends on AEABI && EXPERIMENTAL
         default y
         help
           This option preserves the old syscall interface along with the
diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig
index 9592e3925c79..5fdaf3ce9d56 100644
--- a/arch/arm/configs/enp2611_defconfig
+++ b/arch/arm/configs/enp2611_defconfig
@@ -171,7 +171,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
 # CONFIG_XIP_KERNEL is not set
 
 #
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig
index d9d6bb86a6fa..c67fc449a11f 100644
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixdp2400_defconfig
@@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
 # CONFIG_XIP_KERNEL is not set
 
 #
diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig
index 2dc9d499c7d7..60d66e82c51f 100644
--- a/arch/arm/configs/ixdp2401_defconfig
+++ b/arch/arm/configs/ixdp2401_defconfig
@@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
 # CONFIG_XIP_KERNEL is not set
 
 #
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig
index ea8f4b478fa3..f54f3dcc5b33 100644
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ixdp2801_defconfig
@@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware ixdp2x01_clock=50000000"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
 # CONFIG_XIP_KERNEL is not set
 
 #
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 1964ccd8a71f..6695b07cf1ba 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,11 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Sun Nov 13 17:41:24 2005
+# Linux kernel version: 2.6.16-rc2
+# Mon Feb  6 11:17:23 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 
@@ -28,27 +27,31 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -102,6 +105,7 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
 
 #
 # S3C24XX Implementations
@@ -160,7 +164,6 @@ CONFIG_CPU_TLB_V4WBI=y
 # Bus support
 #
 CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -172,6 +175,7 @@ CONFIG_ISA_DMA_API=y
 #
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -214,6 +218,8 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
 CONFIG_APM=y
 
 #
@@ -259,6 +265,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -276,7 +287,6 @@ CONFIG_TCP_CONG_BIC=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -300,6 +310,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
@@ -412,8 +427,6 @@ CONFIG_PARPORT_1284=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -502,7 +515,6 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
@@ -607,11 +619,11 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
-# CONFIG_ESPSERIAL is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
@@ -625,6 +637,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -687,6 +700,7 @@ CONFIG_S3C2410_RTC=y
 #
 # TPM devices
 #
+# CONFIG_TCG_TPM is not set
 # CONFIG_TELCLOCK is not set
 
 #
@@ -731,6 +745,12 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_I2C_DEBUG_CHIP is not set
 
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
@@ -863,6 +883,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
 CONFIG_INOTIFY=y
@@ -897,6 +918,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -965,6 +987,7 @@ CONFIG_SOLARIS_X86_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1020,12 +1043,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1034,6 +1058,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index d058e7c12568..8c3035d5ffc9 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -291,21 +291,21 @@
                 CALL(sys_mq_getsetattr)
 /* 280 */       CALL(sys_waitid)
                 CALL(sys_socket)
-                CALL(sys_bind)
-                CALL(sys_connect)
+                CALL(ABI(sys_bind, sys_oabi_bind))
+                CALL(ABI(sys_connect, sys_oabi_connect))
                 CALL(sys_listen)
 /* 285 */       CALL(sys_accept)
                 CALL(sys_getsockname)
                 CALL(sys_getpeername)
                 CALL(sys_socketpair)
                 CALL(sys_send)
-/* 290 */       CALL(sys_sendto)
+/* 290 */       CALL(ABI(sys_sendto, sys_oabi_sendto))
                 CALL(sys_recv)
                 CALL(sys_recvfrom)
                 CALL(sys_shutdown)
                 CALL(sys_setsockopt)
 /* 295 */       CALL(sys_getsockopt)
-                CALL(sys_sendmsg)
+                CALL(ABI(sys_sendmsg, sys_oabi_sendmsg))
                 CALL(sys_recvmsg)
                 CALL(ABI(sys_semop, sys_oabi_semop))
                 CALL(sys_semget)
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index d401d908c463..964cd717506b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -333,10 +333,14 @@ __pabt_svc:
                                         @ from the exception stack
 
 #if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#ifndef CONFIG_MMU
+#warning "NPTL on non MMU needs fixing"
+#else
         @ make sure our user space atomic helper is aborted
         cmp     r2, #TASK_SIZE
         bichs   r3, r3, #PSR_Z_BIT
 #endif
+#endif
 
         @
         @ We are now ready to fill in the remaining blanks on the stack:
@@ -705,7 +709,12 @@ __kuser_memory_barrier:				@ 0xffff0fa0
  * The C flag is also set if *ptr was changed to allow for assembly
  * optimization in the calling code.
  *
- * Note: this routine already includes memory barriers as needed.
+ * Notes:
+ *
+ *    - This routine already includes memory barriers as needed.
+ *
+ *    - A failure might be transient, i.e. it is possible, although unlikely,
+ *      that "failure" be returned even if *ptr == oldval.
  *
  * For example, a user space atomic_add implementation could look like this:
  *
@@ -756,12 +765,18 @@ __kuser_cmpxchg:				@ 0xffff0fc0
          * exception happening just after the str instruction which would
          * clear the Z flag although the exchange was done.
          */
+#ifdef CONFIG_MMU
         teq     ip, ip                  @ set Z flag
         ldr     ip, [r2]                @ load current val
         add     r3, r2, #1              @ prepare store ptr
         teqeq   ip, r0                  @ compare with oldval if still allowed
         streq   r1, [r3, #-1]!          @ store newval if still allowed
         subs    r0, r2, r3              @ if r2 == r3 the str occured
+#else
+#warning "NPTL on non MMU needs fixing"
+        mov     r0, #-1
+        adds    r0, r0, #0
+#endif
         mov     pc, lr
 
 #else
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index eafa8e5284af..9d4b76409c64 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -59,6 +59,16 @@
  *   struct sembuf loses its padding with EABI.  Since arrays of them are
  *   used they have to be copyed to remove the padding. Compatibility wrappers
  *   provided below.
+ *
+ * sys_bind:
+ * sys_connect:
+ * sys_sendmsg:
+ * sys_sendto:
+ *
+ *   struct sockaddr_un loses its padding with EABI.  Since the size of the
+ *   structure is used as a validation test in unix_mkname(), we need to
+ *   change the length argument to 110 whenever it is 112.  Compatibility
+ *   wrappers provided below.
  */
 
 #include <linux/syscalls.h>
@@ -67,6 +77,7 @@
 #include <linux/fcntl.h>
 #include <linux/eventpoll.h>
 #include <linux/sem.h>
+#include <linux/socket.h>
 #include <asm/ipc.h>
 #include <asm/uaccess.h>
 
@@ -337,3 +348,63 @@ asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
                 return sys_ipc(call, first, second, third, ptr, fifth);
         }
 }
+
+asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen)
+{
+        sa_family_t sa_family;
+        if (addrlen == 112 &&
+            get_user(sa_family, &addr->sa_family) == 0 &&
+            sa_family == AF_UNIX)
+                        addrlen = 110;
+        return sys_bind(fd, addr, addrlen);
+}
+
+asmlinkage long sys_oabi_connect(int fd, struct sockaddr __user *addr, int addrlen)
+{
+        sa_family_t sa_family;
+        if (addrlen == 112 &&
+            get_user(sa_family, &addr->sa_family) == 0 &&
+            sa_family == AF_UNIX)
+                        addrlen = 110;
+        return sys_connect(fd, addr, addrlen);
+}
+
+asmlinkage long sys_oabi_sendto(int fd, void __user *buff,
+                                size_t len, unsigned flags,
+                                struct sockaddr __user *addr,
+                                int addrlen)
+{
+        sa_family_t sa_family;
+        if (addrlen == 112 &&
+            get_user(sa_family, &addr->sa_family) == 0 &&
+            sa_family == AF_UNIX)
+                        addrlen = 110;
+        return sys_sendto(fd, buff, len, flags, addr, addrlen);
+}
+
+asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned flags)
+{
+        struct sockaddr __user *addr;
+        int msg_namelen;
+        sa_family_t sa_family;
+        if (msg &&
+            get_user(msg_namelen, &msg->msg_namelen) == 0 &&
+            msg_namelen == 112 &&
+            get_user(addr, &msg->msg_name) == 0 &&
+            get_user(sa_family, &addr->sa_family) == 0 &&
+            sa_family == AF_UNIX)
+        {
+                /*
+                 * HACK ALERT: there is a limit to how much backward bending
+                 * we should do for what is actually a transitional
+                 * compatibility layer.  This already has known flaws with
+                 * a few ioctls that we don't intend to fix.  Therefore
+                 * consider this blatent hack as another one... and take care
+                 * to run for cover.  In most cases it will "just work fine".
+                 * If it doesn't, well, tough.
+                 */
+                put_user(110, &msg->msg_namelen);
+        }
+        return sys_sendmsg(fd, msg, flags);
+}
+
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 0793dcf54f2e..0e2b641268ad 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -24,6 +24,8 @@ config ARCH_CEIVA
 
 config ARCH_CLEP7312
         bool "CLEP7312"
+        help
+          Boards based on the Cirrus Logic 7212/7312 chips.
 
 config ARCH_EDB7211
         bool "EDB7211"
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 9e5a13bb39d0..52fac89e95b5 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -106,6 +106,7 @@ static void __init enp2611_pci_preinit(void)
 {
         ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
         ixp2000_pci_preinit();
+        pcibios_setup("firmware");
 }
 
 static inline int enp2611_pci_valid_device(struct pci_bus *bus,
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 7c782403042a..09101271298e 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -68,6 +68,7 @@ void __init ixdp2400_pci_preinit(void)
 {
         ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
         ixp2000_pci_preinit();
+        pcibios_setup("firmware");
 }
 
 int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 10f06606d460..150519fb38ec 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -212,6 +212,7 @@ void __init ixdp2x01_pci_preinit(void)
 {
         ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
         ixp2000_pci_preinit();
+        pcibios_setup("firmware");
 }
 
 #define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
@@ -299,7 +300,9 @@ struct hw_pci ixdp2x01_pci __initdata = {
 
 int __init ixdp2x01_pci_init(void)
 {
-        pci_common_init(&ixdp2x01_pci);
+        if (machine_is_ixdp2401() || machine_is_ixdp2801())
+                pci_common_init(&ixdp2x01_pci);
+
         return 0;
 }
 
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index bdc20b51b076..a177e78b2b87 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -30,6 +30,7 @@
 
 static void __init omap_generic_init_irq(void)
 {
+        omap1_init_common_hw();
         omap_init_irq();
 }
 
@@ -104,7 +105,7 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
-        omap_map_common_io();
+        omap1_map_common_io();
 }
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 9533c36a92df..89f0cc74a519 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -128,6 +128,7 @@ static void __init h2_init_smc91x(void)
 
 static void __init h2_init_irq(void)
 {
+        omap1_init_common_hw();
         omap_init_irq();
         omap_gpio_init();
         h2_init_smc91x();
@@ -194,7 +195,7 @@ static void __init h2_init(void)
 
 static void __init h2_map_io(void)
 {
-        omap_map_common_io();
+        omap1_map_common_io();
 }
 
 MACHINE_START(OMAP_H2, "TI-H2")
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index d665efc1c344..d9f386265996 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -203,6 +203,7 @@ static void __init h3_init_smc91x(void)
 
 void h3_init_irq(void)
 {
+        omap1_init_common_hw();
         omap_init_irq();
         omap_gpio_init();
         h3_init_smc91x();
@@ -210,7 +211,7 @@ void h3_init_irq(void)
 
 static void __init h3_map_io(void)
 {
-        omap_map_common_io();
+        omap1_map_common_io();
 }
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 652f37c7f906..a04e4332915e 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -181,6 +181,7 @@ static void __init innovator_init_smc91x(void)
 
 void innovator_init_irq(void)
 {
+        omap1_init_common_hw();
         omap_init_irq();
         omap_gpio_init();
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -285,7 +286,7 @@ static void __init innovator_init(void)
 
 static void __init innovator_map_io(void)
 {
-        omap_map_common_io();
+        omap1_map_common_io();
 
 #ifdef CONFIG_ARCH_OMAP15XX
         if (cpu_is_omap1510()) {
diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c
index 58f783930d45..60d5f8a3339c 100644
--- a/arch/arm/mach-omap1/board-netstar.c
+++ b/arch/arm/mach-omap1/board-netstar.c
@@ -65,6 +65,7 @@ static struct omap_board_config_kernel netstar_config[] = {
 
 static void __init netstar_init_irq(void)
 {
+        omap1_init_common_hw();
         omap_init_irq();
         omap_gpio_init();
 }
@@ -108,7 +109,7 @@ static void __init netstar_init(void)
 
 static void __init netstar_map_io(void)
 {
-        omap_map_common_io();
+        omap1_map_common_io();
 }
 
 #define MACHINE_PANICED         1
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e5d126e8f276..543fa136106d 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -169,6 +169,7 @@ static void __init osk_init_cf(void)
 
 static void __init osk_init_irq(void)
 {
+        omap1_init_common_hw();
         omap_init_irq();
         omap_gpio_init();
         osk_init_smc91x();
@@ -269,7 +270,7 @@ static void __init osk_init(void)
 
 static void __init osk_map_io(void)
 {
-        omap_map_common_io();
+        omap1_map_common_io();
 }
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 67fada207622..e488f7236775 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -34,6 +34,7 @@
 
 static void __init omap_generic_init_irq(void)
 {
+        omap1_init_common_hw();
         omap_init_irq();
 }
 
@@ -72,7 +73,7 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
-        omap_map_common_io();
+        omap1_map_common_io();
 }
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 88708a0c52a2..3913a3cc0ce6 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -144,6 +144,7 @@ static void __init perseus2_init_smc91x(void)
 
 void omap_perseus2_init_irq(void)
 {
+        omap1_init_common_hw();
         omap_init_irq();
         omap_gpio_init();
         perseus2_init_smc91x();
@@ -160,7 +161,7 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = {
 
 static void __init omap_perseus2_map_io(void)
 {
-        omap_map_common_io();
+        omap1_map_common_io();
         iotable_init(omap_perseus2_io_desc,
                      ARRAY_SIZE(omap_perseus2_io_desc));
 
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 959b4b847c87..bfd5fdd1a875 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -162,6 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = {
 
 static void __init voiceblue_init_irq(void)
 {
+        omap1_init_common_hw();
         omap_init_irq();
         omap_gpio_init();
 }
@@ -206,7 +207,7 @@ static void __init voiceblue_init(void)
 
 static void __init voiceblue_map_io(void)
 {
-        omap_map_common_io();
+        omap1_map_common_io();
 }
 
 #define MACHINE_PANICED         1
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index a7a19f75b9e1..82d556be79c5 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
+#include <asm/tlb.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
 #include <asm/arch/mux.h>
@@ -83,15 +84,24 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
 };
 #endif
 
-static int initialized = 0;
-
-static void __init _omap_map_io(void)
+/*
+ * Maps common IO regions for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_map_common_io(void)
 {
-        initialized = 1;
-
-        /* We have to initialize the IO space mapping before we can run
-         * cpu_is_omapxxx() macros. */
         iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+
+        /* Normally devicemaps_init() would flush caches and tlb after
+         * mdesc->map_io(), but we must also do it here because of the CPU
+         * revision check below.
+         */
+        local_flush_tlb_all();
+        flush_cache_all();
+
+        /* We want to check CPU revision early for cpu_is_omapxxxx() macros.
+         * IO space mapping must be initialized before we can do that.
+         */
         omap_check_revision();
 
 #ifdef CONFIG_ARCH_OMAP730
@@ -111,7 +121,14 @@ static void __init _omap_map_io(void)
 #endif
 
         omap_sram_init();
+}
 
+/*
+ * Common low-level hardware init for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_init_common_hw()
+{
         /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
          * on a Posted Write in the TIPB Bridge".
          */
@@ -121,16 +138,7 @@ static void __init _omap_map_io(void)
         /* Must init clocks early to assure that timer interrupt works
          */
         omap1_clk_init();
-}
 
-/*
- * This should only get called from board specific init
- */
-void __init omap_map_common_io(void)
-{
-        if (!initialized) {
-                _omap_map_io();
-                omap1_mux_init();
-        }
+        omap1_mux_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index b937123e5c65..eaecbf422d8c 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -33,6 +33,7 @@
 
 static void __init omap_generic_init_irq(void)
 {
+        omap2_init_common_hw();
         omap_init_irq();
 }
 
@@ -64,7 +65,7 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
-        omap_map_common_io();
+        omap2_map_common_io();
 }
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index c3c35d40378a..a300d634d8a5 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -136,6 +136,7 @@ static inline void __init h4_init_smc91x(void)
 
 static void __init omap_h4_init_irq(void)
 {
+        omap2_init_common_hw();
         omap_init_irq();
         omap_gpio_init();
         h4_init_smc91x();
@@ -181,7 +182,7 @@ static void __init omap_h4_init(void)
 
 static void __init omap_h4_map_io(void)
 {
-        omap_map_common_io();
+        omap2_map_common_io();
 }
 
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 4a222f59f2cf..4303d988c4bf 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -182,7 +182,7 @@ static const struct icst307_params realview_oscvco_params = {
 static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
 {
         void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-        void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET;
+        void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
         u32 val;
 
         val = readl(sys_osc) & ~0x7ffff;
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index af2f3d52b61b..08489efdaf06 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -40,7 +40,6 @@
 #include <linux/mutex.h>
 
 #include <asm/hardware.h>
-#include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
@@ -59,22 +58,18 @@ static DEFINE_MUTEX(clocks_mutex);
 void inline s3c24xx_clk_enable(unsigned int clocks, unsigned int enable)
 {
         unsigned long clkcon;
-        unsigned long flags;
-
-        local_irq_save(flags);
 
         clkcon = __raw_readl(S3C2410_CLKCON);
-        clkcon &= ~clocks;
 
         if (enable)
                 clkcon |= clocks;
+        else
+                clkcon &= ~clocks;
 
         /* ensure none of the special function bits set */
         clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
 
         __raw_writel(clkcon, S3C2410_CLKCON);
-
-        local_irq_restore(flags);
 }
 
 /* enable and disable calls for use with the clk struct */
@@ -138,16 +133,32 @@ void clk_put(struct clk *clk)
 
 int clk_enable(struct clk *clk)
 {
-        if (IS_ERR(clk))
+        if (IS_ERR(clk) || clk == NULL)
                 return -EINVAL;
 
-        return (clk->enable)(clk, 1);
+        clk_enable(clk->parent);
+
+        mutex_lock(&clocks_mutex);
+
+        if ((clk->usage++) == 0)
+                (clk->enable)(clk, 1);
+
+        mutex_unlock(&clocks_mutex);
+        return 0;
 }
 
 void clk_disable(struct clk *clk)
 {
-        if (!IS_ERR(clk))
+        if (IS_ERR(clk) || clk == NULL)
+                return;
+
+        mutex_lock(&clocks_mutex);
+
+        if ((--clk->usage) == 0)
                 (clk->enable)(clk, 0);
+
+        mutex_unlock(&clocks_mutex);
+        clk_disable(clk->parent);
 }
 
 
@@ -361,6 +372,14 @@ int s3c24xx_register_clock(struct clk *clk)
         if (clk->enable == NULL)
                 clk->enable = clk_null_enable;
 
+        /* if this is a standard clock, set the usage state */
+
+        if (clk->ctrlbit) {
+                unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
+
+                clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0;
+        }
+
         /* add to the list of available clocks */
 
         mutex_lock(&clocks_mutex);
@@ -402,6 +421,8 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
          * the LCD clock if it is not needed.
         */
 
+        mutex_lock(&clocks_mutex);
+
         s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0);
         s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0);
         s3c24xx_clk_enable(S3C2410_CLKCON_USBD, 0);
@@ -409,6 +430,8 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
         s3c24xx_clk_enable(S3C2410_CLKCON_IIC, 0);
         s3c24xx_clk_enable(S3C2410_CLKCON_SPI, 0);
 
+        mutex_unlock(&clocks_mutex);
+
         /* assume uart clocks are correctly setup */
 
         /* register our clocks */
diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h
index 177d5c8decf7..eb5c95d1e7f2 100644
--- a/arch/arm/mach-s3c2410/clock.h
+++ b/arch/arm/mach-s3c2410/clock.h
@@ -16,6 +16,7 @@ struct clk {
         struct clk           *parent;
         const char           *name;
         int                   id;
+        int                   usage;
         unsigned long         rate;
         unsigned long         ctrlbit;
         int                 (*enable)(struct clk *, int enable);
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index b8d994a24d1c..0a47d38789a5 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -275,6 +275,11 @@ static struct resource s3c_adc_resource[] = {
         },
         [1] = {
                 .start = IRQ_TC,
+                .end   = IRQ_TC,
+                .flags = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start = IRQ_ADC,
                 .end   = IRQ_ADC,
                 .flags = IORESOURCE_IRQ,
         }
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 792f66375830..ee82763b02b8 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 
 #include <asm/mach/map.h>
+#include <asm/tlb.h>
 #include <asm/io.h>
 #include <asm/cacheflush.h>
 
@@ -96,6 +97,14 @@ void __init omap_map_sram(void)
                omap_sram_io_desc[0].length);
 
         /*
+         * Normally devicemaps_init() would flush caches and tlb after
+         * mdesc->map_io(), but since we're called from map_io(), we
+         * must do it here.
+         */
+        local_flush_tlb_all();
+        flush_cache_all();
+
+        /*
          * Looks like we need to preserve some bootloader code at the
          * beginning of SRAM for jumping to flash for reboot to work...
          */