Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: Use a definition for the userspace cmpxchg emulation syscall
  [ARM] Fix test for unimplemented ARM syscalls
  ARM: 5784/1: fix early boot machine ID mismatch error display
  [ARM] orion5x: update defconfig
  [ARM] Kirkwood: update defconfig
  [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction
  [ARM] kirkwood: fix PCI I/O port assignment
  [ARM] kirkwood: fix section mismatch
  [ARM] OpenRD base: Initialize PCI express and i2c
  [ARM] properly report mv78100 stepping A1
  ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c
  ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function __raw_readl and IOMEM
  RealView: Add sparsemem support for the RealView PBX platform
  RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statements
  RealView: Add default memory configuration
  Check whether the SCU was already initialised
  ARMv7: Check whether the SMP/nAMP mode was already enabled
  [ARM] pxa: fix resume failure by saving/restoring IPRx registers
  [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboard
  [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi

31 files changed, 568 insertions, 236 deletions

diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index af74cc2de8b6..bcfade33bca9 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 11:58:57 2009
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov  7 20:31:18 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=19
 # CONFIG_GROUP_SCHED is not set
@@ -73,7 +71,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -86,6 +83,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -95,13 +96,17 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -114,7 +119,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -135,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -156,25 +164,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -185,6 +195,7 @@ CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
+CONFIG_MACH_OPENRD_BASE=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -195,7 +206,7 @@ CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_FEROCEON=y
@@ -211,6 +222,7 @@ CONFIG_ARM_THUMB=y
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_FEROCEON_L2=y
 # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
@@ -235,11 +247,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -254,10 +267,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
 
 #
 # Boot options
@@ -345,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -367,6 +383,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,17 +400,18 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
 # CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_MINSTREL=y
 # CONFIG_MAC80211_RC_DEFAULT_PID is not set
 CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
@@ -414,6 +432,7 @@ CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -425,9 +444,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -494,6 +513,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -543,6 +563,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -567,10 +588,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -587,6 +604,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -595,6 +614,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -611,7 +631,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -623,11 +642,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
 # CONFIG_SATA_SIL24 is not set
@@ -649,6 +671,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -676,6 +699,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -693,13 +717,16 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -768,6 +795,9 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -789,6 +819,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -797,10 +828,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
@@ -820,9 +848,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH9K is not set
-# CONFIG_AR9170_USB is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
 # CONFIG_IWLWIFI is not set
@@ -832,6 +858,8 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 # CONFIG_HERMES is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -855,6 +883,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -878,13 +907,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -943,6 +978,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -998,10 +1034,6 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1023,11 +1055,47 @@ CONFIG_SPI_ORION=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1041,33 +1109,28 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1087,7 +1150,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1106,10 +1168,12 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1123,9 +1187,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1150,18 +1219,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1252,11 +1324,14 @@ CONFIG_SDIO_UART=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_MVSDIO=y
 # CONFIG_MMC_SPI is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1266,7 +1341,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -1278,11 +1353,14 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1314,6 +1392,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1325,6 +1404,7 @@ CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1360,8 +1440,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1379,10 +1462,13 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1455,7 +1541,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1530,6 +1615,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1547,6 +1633,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1567,12 +1654,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
@@ -1581,25 +1670,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1623,7 +1699,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1665,11 +1740,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1714,6 +1791,7 @@ CONFIG_CRYPTO_ARC4=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
 
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 9e2385293ecb..5383cd0dff54 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 14:07:25 2009
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov  7 20:52:21 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -69,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -82,6 +79,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
@@ -91,13 +92,17 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -109,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -130,19 +135,22 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -151,25 +159,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 CONFIG_ARCH_ORION5X=y
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Orion Implementations
@@ -187,6 +197,9 @@ CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_EDMINI_V2=y
+CONFIG_MACH_D2NET=y
+CONFIG_MACH_BIGDISK=y
+CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2=y
 CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
@@ -202,7 +215,7 @@ CONFIG_CPU_FEROCEON=y
 CONFIG_CPU_FEROCEON_OLD_ID=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_FEROCEON=y
@@ -215,7 +228,7 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
@@ -240,11 +253,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -259,12 +273,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
 
 #
 # Boot options
@@ -308,6 +324,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -356,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -378,6 +396,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -394,11 +413,15 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -411,6 +434,7 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -422,9 +446,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -537,6 +561,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
@@ -552,7 +577,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -576,10 +603,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -596,6 +619,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -604,6 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -620,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -632,11 +657,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -658,6 +686,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -685,6 +714,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -703,13 +733,16 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -777,6 +810,8 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -798,6 +833,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -806,10 +842,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -835,6 +868,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -855,13 +889,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -912,6 +952,7 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -967,20 +1008,55 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1030,6 +1106,8 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1041,9 +1119,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1057,33 +1133,26 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1097,7 +1166,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1116,10 +1184,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1130,10 +1199,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1160,18 +1230,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1248,7 +1321,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1258,7 +1330,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1269,11 +1341,14 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1306,6 +1381,7 @@ CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1344,8 +1420,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1358,10 +1437,10 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
 CONFIG_EXT4_FS_XATTR=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=m
@@ -1370,10 +1449,13 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1446,7 +1528,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1537,6 +1618,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1552,6 +1634,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1572,6 +1655,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
@@ -1579,6 +1663,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
@@ -1587,25 +1672,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1629,20 +1701,19 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1670,11 +1741,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1691,7 +1764,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -1719,6 +1792,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
 
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 7020217fc49f..4e506d09e5f9 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -403,6 +403,15 @@
 #define __ARM_NR_set_tls                (__ARM_NR_BASE+5)
 
 /*
+ * *NOTE*: This is a ghost syscall private to the kernel.  Only the
+ * __kuser_cmpxchg code in entry-armv.S should be aware of its
+ * existence.  Don't ever use this from user code.
+ */
+#ifdef __KERNEL__
+#define __ARM_NR_cmpxchg                (__ARM_NR_BASE+0x00fff0)
+#endif
+
+/*
  * The following syscalls are obsolete and no longer available for EABI.
  */
 #if defined(__ARM_EABI__) && !defined(__KERNEL__)
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0022b4d57f8b..d2903e3bc861 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -21,6 +21,7 @@
 #include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
+#include <asm/unistd.h>
 
 #include "entry-header.S"
 
@@ -908,10 +909,10 @@ __kuser_cmpxchg:				@ 0xffff0fc0
          * A special ghost syscall is used for that (see traps.c).
          */
         stmfd   sp!, {r7, lr}
-        mov     r7, #0xff00             @ 0xfff0 into r7 for EABI
-        orr     r7, r7, #0xf0
-        swi     #0x9ffff0
+        ldr     r7, =1f                 @ it's 20 bits
+        swi     __ARM_NR_cmpxchg
         ldmfd   sp!, {r7, pc}
+1:      .word   __ARM_NR_cmpxchg
 
 #elif __LINUX_ARM_ARCH__ < 6
 
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 885a7214418d..b9505aa267c0 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -97,7 +97,7 @@ __error_a:
         bl      printhex8
         adr     r0, str_a2
         bl      printascii
-        adr     r3, 3f
+        adr     r3, 4f
         ldmia   r3, {r4, r5, r6}                @ get machine desc list
         sub     r4, r3, r4                      @ get offset between virt&phys
         add     r5, r5, r4                      @ convert virt addresses to
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index d3831f616ee9..9ab4149bd983 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -37,6 +37,10 @@ void __init scu_enable(void __iomem *scu_base)
         u32 scu_ctrl;
 
         scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+        /* already enabled? */
+        if (scu_ctrl & 1)
+                return;
+
         scu_ctrl |= 1;
         __raw_writel(scu_ctrl, scu_base + SCU_CTRL);
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 95718a6b50a6..3f361a783f43 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -528,7 +528,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
          * __kuser_cmpxchg code in entry-armv.S should be aware of its
          * existence.  Don't ever use this from user code.
          */
-        case 0xfff0:
+        case NR(cmpxchg):
         for (;;) {
                 extern void do_DataAbort(unsigned long addr, unsigned int fsr,
                                          struct pt_regs *regs);
@@ -573,7 +573,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
                    if not implemented, rather than raising SIGILL.  This
                    way the calling program can gracefully determine whether
                    a feature is supported.  */
-                if (no <= 0x7ff)
+                if ((no & 0xffff) <= 0x7ff)
                         return -ENOSYS;
                 break;
         }
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index d83b80478b09..f3757a1c5a10 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 1da5d1c18ecb..2e69168fc699 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -105,7 +105,7 @@ void __init kirkwood_setup_cpu_mbus(void)
         setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
                       TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
         setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
-                      TARGET_PCIE, ATTR_PCIE_MEM, -1);
+                      TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
 
         /*
          * Setup window for NAND controller.
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0acb61f3c10b..7177c4aa6342 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -845,7 +845,7 @@ int __init kirkwood_find_tclk(void)
         return 166666667;
 }
 
-static void kirkwood_timer_init(void)
+static void __init kirkwood_timer_init(void)
 {
         kirkwood_tclk = kirkwood_find_tclk();
         orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index a643a846d5fb..44e8be04f259 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -15,7 +15,7 @@
 
 static inline void __iomem *__io(unsigned long addr)
 {
-        return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+        return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
                                         + KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
 
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 54c132731d2d..a15cf0ee22bd 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -43,6 +43,7 @@
 #define KIRKWOOD_REGS_SIZE              SZ_1M
 
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE     0xe0000000
+#define KIRKWOOD_PCIE_MEM_BUS_BASE      0xe0000000
 #define KIRKWOOD_PCIE_MEM_SIZE          SZ_128M
 
 /*
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
index 947dfb8cd5b2..77617c722299 100644
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -70,8 +70,20 @@ static void __init openrd_base_init(void)
         kirkwood_ge00_init(&openrd_base_ge00_data);
         kirkwood_sata_init(&openrd_base_sata_data);
         kirkwood_sdio_init(&openrd_base_mvsdio_data);
+
+        kirkwood_i2c_init();
 }
 
+static int __init openrd_base_pci_init(void)
+{
+        if (machine_is_openrd_base())
+                kirkwood_pcie_init();
+
+        return 0;
+ }
+subsys_initcall(openrd_base_pci_init);
+
+
 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
         /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
         .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index d90b9aae308d..a604b2a701aa 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -93,7 +93,7 @@ static struct pci_ops pcie_ops = {
 };
 
 
-static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 {
         struct resource *res;
         extern unsigned int kirkwood_clk_ctrl;
@@ -115,7 +115,7 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
          */
         res[0].name = "PCIe I/O Space";
         res[0].flags = IORESOURCE_IO;
-        res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+        res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
         res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
         if (request_resource(&ioport_resource, &res[0]))
                 panic("Request PCIe IO resource failed\n");
@@ -126,7 +126,7 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
          */
         res[1].name = "PCIe Memory Space";
         res[1].flags = IORESOURCE_MEM;
-        res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+        res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE;
         res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
         if (request_resource(&iomem_resource, &res[1]))
                 panic("Request PCIe Memory resource failed\n");
diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
index 56d12e8de895..97e8acb1cf6c 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-switch.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -25,7 +25,7 @@
 #define KS8695_SEC1             (0x04)          /* Switch Engine Control 1 */
 #define KS8695_SEC2             (0x08)          /* Switch Engine Control 2 */
 
-#define KS8695_P(x)_C(z)        (0xc0 + (((x)-1)*3 + ((z)-1))*4)        /* Port Configuration Registers */
+#define KS8695_SEPXCZ(x,z)      (0x0c + (((x)-1)*3 + ((z)-1))*4)        /* Port Configuration Registers */
 
 #define KS8695_SEP12AN          (0x48)          /* Port 1 & 2 Auto-Negotiation */
 #define KS8695_SEP34AN          (0x4c)          /* Port 3 & 4 Auto-Negotiation */
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 1b22e4af8791..08465eb6a2c2 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -845,6 +845,8 @@ static char * __init mv78xx0_id(void)
         } else if (dev == MV78100_DEV_ID) {
                 if (rev == MV78100_REV_A0)
                         return "MV78100-A0";
+                else if (rev == MV78100_REV_A1)
+                        return "MV78100-A1";
                 else
                         return "MV78100-Rev-Unsupported";
         } else if (dev == MV78200_DEV_ID) {
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index d715b92b0908..788bdace1304 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -112,6 +112,7 @@
 
 #define MV78100_DEV_ID          0x7810
 #define MV78100_REV_A0          1
+#define MV78100_REV_A1          2
 
 #define MV78200_DEV_ID          0x7820
 #define MV78200_REV_A0          1
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index d694ce289668..6112af431fa4 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -25,6 +25,8 @@
 
 #include "generic.h"
 
+#define MAX_INTERNAL_IRQS       128
+
 #define IRQ_BIT(n)      (((n) - PXA_IRQ(0)) & 0x1f)
 #define _ICMR(n)        (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR))
 #define _ICLR(n)        (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR))
@@ -122,6 +124,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
         int irq, i;
 
+        BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
+
         pxa_internal_irq_nr = irq_nr;
 
         for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
@@ -149,7 +153,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 }
 
 #ifdef CONFIG_PM
-static unsigned long saved_icmr[2];
+static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
+static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
 
 static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 {
@@ -159,6 +164,8 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
                 saved_icmr[i] = _ICMR(irq);
                 _ICMR(irq) = 0;
         }
+        for (i = 0; i < pxa_internal_irq_nr; i++)
+                saved_ipr[i] = IPR(i);
 
         return 0;
 }
@@ -171,6 +178,8 @@ static int pxa_irq_resume(struct sys_device *dev)
                 _ICMR(irq) = saved_icmr[i];
                 _ICLR(irq) = 0;
         }
+        for (i = 0; i < pxa_internal_irq_nr; i++)
+                IPR(i) = saved_ipr[i];
 
         ICCR = 1;
         return 0;
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index bb2cc0dd44ec..0b92291a58f6 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -292,10 +292,10 @@ const static unsigned int palmtc_keypad_col_gpios[] = {
 
 static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
         .keymap_data    = &palmtc_keymap_data,
-        .col_gpios      = palmtc_keypad_row_gpios,
-        .num_col_gpios  = 12,
-        .row_gpios      = palmtc_keypad_col_gpios,
-        .num_row_gpios  = 4,
+        .row_gpios      = palmtc_keypad_row_gpios,
+        .num_row_gpios  = ARRAY_SIZE(palmtc_keypad_row_gpios),
+        .col_gpios      = palmtc_keypad_col_gpios,
+        .num_col_gpios  = ARRAY_SIZE(palmtc_keypad_col_gpios),
         .active_low     = 1,
 
         .debounce_ms            = 20,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 82ff5733e4dc..3da45d051743 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -779,11 +779,34 @@ static void __init common_init(void)
         pxa_set_i2c_info(NULL);
 }
 
+#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
+static struct nand_bbt_descr sharpsl_akita_bbt = {
+        .options = 0,
+        .offs = 4,
+        .len = 1,
+        .pattern = scan_ff_pattern
+};
+
+static struct nand_ecclayout akita_oobinfo = {
+        .eccbytes = 24,
+        .eccpos = {
+                   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
+                   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+                   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
+        .oobfree = {{0x08, 0x09}}
+};
+#endif
+
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
 static void __init spitz_init(void)
 {
         spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
 
+        if (machine_is_borzoi()) {
+                sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
+                sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
+        }
+
         platform_scoop_config = &spitz_pcmcia_config;
 
         common_init();
@@ -808,22 +831,6 @@ static struct i2c_board_info akita_i2c_board_info[] = {
         },
 };
 
-static struct nand_bbt_descr sharpsl_akita_bbt = {
-        .options = 0,
-        .offs = 4,
-        .len = 1,
-        .pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
-        .eccbytes = 24,
-        .eccpos = {
-                   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
-                   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-                   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
-        .oobfree = {{0x08, 0x09}}
-};
-
 static void __init akita_init(void)
 {
         spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dfc9b0bc6eb2..c48e1f2c3349 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -70,6 +70,8 @@ config MACH_REALVIEW_PBX
         bool "Support RealView/PBX platform"
         select ARM_GIC
         select HAVE_PATA_PLATFORM
+        select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET
+        select ZONE_DMA if SPARSEMEM
         help
           Include support for the ARM(R) RealView PBX platform.
 
@@ -82,6 +84,7 @@ config REALVIEW_HIGH_PHYS_OFFSET
           0x70000000, 256MB of which being mirrored at 0x00000000. If
           the board supports 512MB of RAM, this option allows the
           memory to be accessed contiguously at the high physical
-          offset.
+          offset. On the PBX board, disabling this option allows 1GB of
+          RAM to be used with SPARSEMEM.
 
 endmenu
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index a2083b60e3fb..9f293438e020 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -59,6 +59,25 @@
 /* used by entry-macro.S and platsmp.c */
 void __iomem *gic_cpu_base_addr;
 
+#ifdef CONFIG_ZONE_DMA
+/*
+ * Adjust the zones if there are restrictions for DMA access.
+ */
+void __init realview_adjust_zones(int node, unsigned long *size,
+                                  unsigned long *hole)
+{
+        unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
+
+        if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+                return;
+
+        size[ZONE_NORMAL] = size[0] - dma_size;
+        size[ZONE_DMA] = dma_size;
+        hole[ZONE_NORMAL] = hole[0];
+        hole[ZONE_DMA] = 0;
+}
+#endif
+
 /*
  * This is the RealView sched_clock implementation.  This has
  * a resolution of 41.7ns, and a maximum value of about 179s.
@@ -543,7 +562,7 @@ static int realview_clcd_setup(struct clcd_fb *fb)
         fb->panel               = realview_clcd_panel();
 
         fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
-                                                    &dma, GFP_KERNEL);
+                                                    &dma, GFP_KERNEL | GFP_DMA);
         if (!fb->fb.screen_base) {
                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
                 return -ENOMEM;
@@ -788,3 +807,24 @@ void __init realview_timer_init(unsigned int timer_irq)
         realview_clocksource_init();
         realview_clockevents_init(timer_irq);
 }
+
+/*
+ * Setup the memory banks.
+ */
+void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from,
+                    struct meminfo *meminfo)
+{
+        /*
+         * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
+         * Half of this is mirrored at 0.
+         */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+        meminfo->bank[0].start = 0x70000000;
+        meminfo->bank[0].size = SZ_512M;
+        meminfo->nr_banks = 1;
+#else
+        meminfo->bank[0].start = 0;
+        meminfo->bank[0].size = SZ_256M;
+        meminfo->nr_banks = 1;
+#endif
+}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 699671fa6e0b..781bca68a9fa 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/io.h>
 
+#include <asm/setup.h>
 #include <asm/leds.h>
 
 #define AMBA_DEVICE(name,busid,base,plat)                       \
@@ -44,6 +45,8 @@ static struct amba_device name##_device = {			\
         /* .dma         = base##_DMA,*/                         \
 }
 
+struct machine_desc;
+
 extern struct platform_device realview_flash_device;
 extern struct platform_device realview_cf_device;
 extern struct platform_device realview_i2c_device;
@@ -61,5 +64,8 @@ extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
 extern int realview_usb_register(struct resource *res);
+extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags,
+                           char **from, struct meminfo *meminfo);
 extern void (*realview_reset)(char);
+
 #endif
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 293c30025e7e..2417bbcf97fd 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -29,4 +29,53 @@
 #define PHYS_OFFSET             UL(0x00000000)
 #endif
 
+#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
+extern void realview_adjust_zones(int node, unsigned long *size,
+                                  unsigned long *hole);
+#define arch_adjust_zones(node, size, hole) \
+        realview_adjust_zones(node, size, hole)
+
+#define ISA_DMA_THRESHOLD       (PHYS_OFFSET + SZ_256M - 1)
+#define MAX_DMA_ADDRESS         (PAGE_OFFSET + SZ_256M)
+#endif
+
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * Sparsemem definitions for RealView PBX.
+ *
+ * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
+ * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
+ * may be used for DMA.
+ *
+ * The macros below define a section size of 256MB and a non-linear virtual to
+ * physical mapping:
+ *
+ * 256MB @ 0x00000000 -> PAGE_OFFSET
+ * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
+ * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
+ */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
+#endif
+
+#define MAX_PHYSMEM_BITS        32
+#define SECTION_SIZE_BITS       28
+
+/* bank page offsets */
+#define PAGE_OFFSET1    (PAGE_OFFSET + 0x10000000)
+#define PAGE_OFFSET2    (PAGE_OFFSET + 0x30000000)
+
+#define __phys_to_virt(phys)                                            \
+        ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 :    \
+         (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 :    \
+         (phys) + PAGE_OFFSET)
+
+#define __virt_to_phys(virt)                                            \
+         ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 : \
+          (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 : \
+          (virt) - PAGE_OFFSET)
+
+#endif  /* CONFIG_SPARSEMEM */
+
 #endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index a88458b4799d..009265818d55 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -146,11 +146,8 @@ static void __init poke_milo(void)
          * register. The BootMonitor waits for this register to become
          * non-zero.
          */
-#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
-#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
         __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
-                     __io_address(REALVIEW_SYS_BASE) +
-                     REALVIEW_SYS_FLAGSS_OFFSET);
+                     __io_address(REALVIEW_SYS_FLAGSSET));
 
         mb();
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 1d65e64ae571..917f8ca3abff 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -415,6 +415,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
         .phys_io        = REALVIEW_EB_UART0_BASE,
         .io_pg_offst    = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x00000100,
+        .fixup          = realview_fixup,
         .map_io         = realview_eb_map_io,
         .init_irq       = gic_init_irq,
         .timer          = &realview_eb_timer,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a6ba147692c1..7fb726d5f8b9 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -300,6 +300,18 @@ static void realview_pb1176_reset(char mode)
         __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
 }
 
+static void realview_pb1176_fixup(struct machine_desc *mdesc,
+                                  struct tag *tags, char **from,
+                                  struct meminfo *meminfo)
+{
+        /*
+         * RealView PB1176 only has 128MB of RAM mapped at 0.
+         */
+        meminfo->bank[0].start = 0;
+        meminfo->bank[0].size = SZ_128M;
+        meminfo->nr_banks = 1;
+}
+
 static void __init realview_pb1176_init(void)
 {
         int i;
@@ -331,6 +343,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
         .phys_io        = REALVIEW_PB1176_UART0_BASE,
         .io_pg_offst    = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x00000100,
+        .fixup          = realview_pb1176_fixup,
         .map_io         = realview_pb1176_map_io,
         .init_irq       = gic_init_irq,
         .timer          = &realview_pb1176_timer,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 070d284ce96e..9bbbfc05f225 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -347,6 +347,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
         .phys_io        = REALVIEW_PB11MP_UART0_BASE,
         .io_pg_offst    = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x00000100,
+        .fixup          = realview_fixup,
         .map_io         = realview_pb11mp_map_io,
         .init_irq       = gic_init_irq,
         .timer          = &realview_pb11mp_timer,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 941beb2b9709..fe861e96c566 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -298,6 +298,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
         .phys_io        = REALVIEW_PBA8_UART0_BASE,
         .io_pg_offst    = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x00000100,
+        .fixup          = realview_fixup,
         .map_io         = realview_pba8_map_io,
         .init_irq       = gic_init_irq,
         .timer          = &realview_pba8_timer,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 7e4bc6cdca52..ec39488e2b42 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -304,6 +304,26 @@ static struct sys_timer realview_pbx_timer = {
         .init           = realview_pbx_timer_init,
 };
 
+static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
+                               char **from, struct meminfo *meminfo)
+{
+#ifdef CONFIG_SPARSEMEM
+        /*
+         * Memory configuration with SPARSEMEM enabled on RealView PBX (see
+         * asm/mach/memory.h for more information).
+         */
+        meminfo->bank[0].start = 0;
+        meminfo->bank[0].size = SZ_256M;
+        meminfo->bank[1].start = 0x20000000;
+        meminfo->bank[1].size = SZ_512M;
+        meminfo->bank[2].start = 0x80000000;
+        meminfo->bank[2].size = SZ_256M;
+        meminfo->nr_banks = 3;
+#else
+        realview_fixup(mdesc, tags, from, meminfo);
+#endif
+}
+
 static void __init realview_pbx_init(void)
 {
         int i;
@@ -345,6 +365,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
         .phys_io        = REALVIEW_PBX_UART0_BASE,
         .io_pg_offst    = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x00000100,
+        .fixup          = realview_pbx_fixup,
         .map_io         = realview_pbx_map_io,
         .init_irq       = gic_init_irq,
         .timer          = &realview_pbx_timer,
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index eeeed01ee44a..3a285218fd15 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -186,9 +186,10 @@ cpu_v7_name:
  */
 __v7_setup:
 #ifdef CONFIG_SMP
-        mrc     p15, 0, r0, c1, c0, 1           @ Enable SMP/nAMP mode and
-        orr     r0, r0, #(1 << 6) | (1 << 0)    @ TLB ops broadcasting
-        mcr     p15, 0, r0, c1, c0, 1
+        mrc     p15, 0, r0, c1, c0, 1
+        tst     r0, #(1 << 6)                   @ SMP/nAMP mode enabled?
+        orreq   r0, r0, #(1 << 6) | (1 << 0)    @ Enable SMP/nAMP mode and
+        mcreq   p15, 0, r0, c1, c0, 1           @ TLB ops broadcasting
 #endif
         adr     r12, __v7_setup_stack           @ the local stack
         stmia   r12, {r0-r5, r7, r9, r11, lr}