Merge branch 'linus' into core/generic-dma-coherent

Conflicts:

	arch/x86/Kconfig

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1265 files changed, 74061 insertions, 22617 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index ad89a33d8c6e..364c6dadde0a 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -27,18 +27,65 @@ config KPROBES
           for kernel debugging, non-intrusive instrumentation and testing.
           If in doubt, say "N".
 
+config HAVE_EFFICIENT_UNALIGNED_ACCESS
+        def_bool n
+        help
+          Some architectures are unable to perform unaligned accesses
+          without the use of get_unaligned/put_unaligned. Others are
+          unable to perform such accesses efficiently (e.g. trap on
+          unaligned access and require fixing it up in the exception
+          handler.)
+
+          This symbol should be selected by an architecture if it can
+          perform unaligned accesses efficiently to allow different
+          code paths to be selected for these cases. Some network
+          drivers, for example, could opt to not fix up alignment
+          problems with received packets if doing so would not help
+          much.
+
+          See Documentation/unaligned-memory-access.txt for more
+          information on the topic of unaligned memory accesses.
+
 config KRETPROBES
         def_bool y
         depends on KPROBES && HAVE_KRETPROBES
 
+config HAVE_IOREMAP_PROT
+        def_bool n
+
 config HAVE_KPROBES
         def_bool n
 
 config HAVE_KRETPROBES
         def_bool n
 
+#
+# An arch should select this if it provides all these things:
+#
+#       task_pt_regs()          in asm/processor.h or asm/ptrace.h
+#       arch_has_single_step()  if there is hardware single-step support
+#       arch_has_block_step()   if there is hardware block-step support
+#       arch_ptrace()           and not #define __ARCH_SYS_PTRACE
+#       compat_arch_ptrace()    and #define __ARCH_WANT_COMPAT_SYS_PTRACE
+#       asm/syscall.h           supplying asm-generic/syscall.h interface
+#       linux/regset.h          user_regset interfaces
+#       CORE_DUMP_USE_REGSET    #define'd in linux/elf.h
+#       TIF_SYSCALL_TRACE       calls tracehook_report_syscall_{entry,exit}
+#       TIF_NOTIFY_RESUME       calls tracehook_notify_resume()
+#       signal delivery         calls tracehook_signal_handler()
+#
+config HAVE_ARCH_TRACEHOOK
+        def_bool n
+
 config HAVE_DMA_ATTRS
         def_bool n
 
 config USE_GENERIC_SMP_HELPERS
         def_bool n
+
+config HAVE_CLK
+        def_bool n
+        help
+          The <linux/clk.h> calls support software clock gating and
+          thus are a key power management tool on many systems.
+
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index dbe8c280fea9..1bec55d63ef6 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -333,11 +333,6 @@ config PCI_SYSCALL
 config IOMMU_HELPER
         def_bool PCI
 
-config ALPHA_CORE_AGP
-        bool
-        depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
-        default y
-
 config ALPHA_NONAME
         bool
         depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index c00646b25f6e..3047a1b3a517 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -78,8 +78,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static char *input_data;
 static int  input_data_size;
@@ -88,51 +86,18 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
 static void gzip_mark(void **);
 static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
 #define HEAP_SIZE 0x3000
 
 #include "../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-        void *p;
-
-        if (size <0) error("Malloc error");
-        if (free_mem_ptr <= 0) error("Memory error");
-
-        free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
-        p = (void *)free_mem_ptr;
-        free_mem_ptr += size;
-
-        if (free_mem_ptr >= free_mem_ptr_end)
-                error("Out of memory");
-        return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-        *ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-        free_mem_ptr = (long) *ptr;
-}
-
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
  * and at least one byte is really needed.
@@ -193,7 +158,7 @@ decompress_kernel(void *output_start,
 
         /* FIXME FIXME FIXME */
         free_mem_ptr            = (ulg)output_start + ksize;
-        free_mem_ptr_end        = (ulg)output_start + ksize + 0x200000;
+        free_mem_end_ptr        = (ulg)output_start + ksize + 0x200000;
         /* FIXME FIXME FIXME */
 
         /* put in temp area to reduce initial footprint */
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 32ca1b927307..6e943135f0e0 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -253,15 +253,15 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer,
 }
 
 asmlinkage int
-osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz)
+osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz)
 {
-        struct nameidata nd;
+        struct path path;
         int retval;
 
-        retval = user_path_walk(path, &nd);
+        retval = user_path(pathname, &path);
         if (!retval) {
-                retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz);
-                path_put(&nd.path);
+                retval = do_osf_statfs(path.dentry, buffer, bufsiz);
+                path_put(&path);
         }
         return retval;
 }
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 40c15e7301de..234e42b8ee74 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -94,36 +94,6 @@ __bad_page(void)
         return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
 }
 
-#ifndef CONFIG_DISCONTIGMEM
-void
-show_mem(void)
-{
-        long i,free = 0,total = 0,reserved = 0;
-        long shared = 0, cached = 0;
-
-        printk("\nMem-info:\n");
-        show_free_areas();
-        printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-        i = max_mapnr;
-        while (i-- > 0) {
-                total++;
-                if (PageReserved(mem_map+i))
-                        reserved++;
-                else if (PageSwapCache(mem_map+i))
-                        cached++;
-                else if (!page_count(mem_map+i))
-                        free++;
-                else
-                        shared += page_count(mem_map + i) - 1;
-        }
-        printk("%ld pages of RAM\n",total);
-        printk("%ld free pages\n",free);
-        printk("%ld reserved pages\n",reserved);
-        printk("%ld pages shared\n",shared);
-        printk("%ld pages swap cached\n",cached);
-}
-#endif
-
 static inline unsigned long
 load_PCB(struct pcb_struct *pcb)
 {
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index 10ab7833e83c..a13de49d1265 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -19,7 +19,6 @@
 #include <asm/pgalloc.h>
 
 pg_data_t node_data[MAX_NUMNODES];
-bootmem_data_t node_bdata[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
 
 #undef DEBUG_DISCONTIG
@@ -141,7 +140,7 @@ setup_memory_node(int nid, void *kernel_end)
                 printk(" not enough mem to reserve NODE_DATA");
                 return;
         }
-        NODE_DATA(nid)->bdata = &node_bdata[nid];
+        NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 
         printk(" Detected node memory:   start %8lu, end %8lu\n",
                node_min_pfn, node_max_pfn);
@@ -304,8 +303,9 @@ void __init paging_init(void)
         dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
 
         for_each_online_node(nid) {
-                unsigned long start_pfn = node_bdata[nid].node_boot_start >> PAGE_SHIFT;
-                unsigned long end_pfn = node_bdata[nid].node_low_pfn;
+                bootmem_data_t *bdata = &bootmem_node_data[nid];
+                unsigned long start_pfn = bdata->node_min_pfn;
+                unsigned long end_pfn = bdata->node_low_pfn;
 
                 if (dma_local_pfn >= end_pfn - start_pfn)
                         zones_size[ZONE_DMA] = end_pfn - start_pfn;
@@ -313,7 +313,7 @@ void __init paging_init(void)
                         zones_size[ZONE_DMA] = dma_local_pfn;
                         zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn;
                 }
-                free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, NULL);
+                free_area_init_node(nid, zones_size, start_pfn, NULL);
         }
 
         /* Initialize the kernel's ZERO_PGE. */
@@ -359,38 +359,3 @@ void __init mem_init(void)
         mem_stress();
 #endif
 }
-
-void
-show_mem(void)
-{
-        long i,free = 0,total = 0,reserved = 0;
-        long shared = 0, cached = 0;
-        int nid;
-
-        printk("\nMem-info:\n");
-        show_free_areas();
-        printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-        for_each_online_node(nid) {
-                unsigned long flags;
-                pgdat_resize_lock(NODE_DATA(nid), &flags);
-                i = node_spanned_pages(nid);
-                while (i-- > 0) {
-                        struct page *page = nid_page_nr(nid, i);
-                        total++;
-                        if (PageReserved(page))
-                                reserved++;
-                        else if (PageSwapCache(page))
-                                cached++;
-                        else if (!page_count(page))
-                                free++;
-                        else
-                                shared += page_count(page) - 1;
-                }
-                pgdat_resize_unlock(NODE_DATA(nid), &flags);
-        }
-        printk("%ld pages of RAM\n",total);
-        printk("%ld free pages\n",free);
-        printk("%ld reserved pages\n",reserved);
-        printk("%ld pages shared\n",shared);
-        printk("%ld pages swap cached\n",cached);
-}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ea8b9be02b60..652cd32a09c5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@ config ARM
         select RTC_LIB
         select SYS_SUPPORTS_APM_EMULATION
         select HAVE_OPROFILE
+        select HAVE_ARCH_KGDB
         select HAVE_KPROBES if (!XIP_KERNEL)
         select HAVE_KRETPROBES if (HAVE_KPROBES)
         select HAVE_FTRACE if (!XIP_KERNEL)
@@ -198,12 +199,14 @@ choice
 config ARCH_AAEC2000
         bool "Agilent AAEC-2000 based"
         select ARM_AMBA
+        select HAVE_CLK
         help
           This enables support for systems based on the Agilent AAEC-2000
 
 config ARCH_INTEGRATOR
         bool "ARM Ltd. Integrator family"
         select ARM_AMBA
+        select HAVE_CLK
         select ICST525
         help
           Support for ARM's Integrator platform.
@@ -211,6 +214,7 @@ config ARCH_INTEGRATOR
 config ARCH_REALVIEW
         bool "ARM Ltd. RealView family"
         select ARM_AMBA
+        select HAVE_CLK
         select ICST307
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
@@ -221,6 +225,7 @@ config ARCH_VERSATILE
         bool "ARM Ltd. Versatile family"
         select ARM_AMBA
         select ARM_VIC
+        select HAVE_CLK
         select ICST307
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
@@ -262,7 +267,9 @@ config ARCH_EP93XX
         select ARM_AMBA
         select ARM_VIC
         select GENERIC_GPIO
-        select HAVE_GPIO_LIB
+        select HAVE_CLK
+        select HAVE_CLK
+        select ARCH_REQUIRE_GPIOLIB
         help
           This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -308,7 +315,7 @@ config ARCH_IOP32X
         select PLAT_IOP
         select PCI
         select GENERIC_GPIO
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         help
           Support for Intel's 80219 and IOP32X (XScale) family of
           processors.
@@ -319,7 +326,7 @@ config ARCH_IOP33X
         select PLAT_IOP
         select PCI
         select GENERIC_GPIO
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         help
           Support for Intel's IOP33X (XScale) family of processors.
 
@@ -381,6 +388,7 @@ config ARCH_NS9XXX
         select GENERIC_GPIO
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
+        select HAVE_CLK
         help
           Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
           System.
@@ -411,7 +419,7 @@ config ARCH_MXC
         select GENERIC_CLOCKEVENTS
         select ARCH_MTD_XIP
         select GENERIC_GPIO
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         help
           Support for Freescale MXC/iMX-based family of processors
 
@@ -430,6 +438,7 @@ config ARCH_ORION5X
 
 config ARCH_PNX4008
         bool "Philips Nexperia PNX4008 Mobile"
+        select HAVE_CLK
         help
           This enables support for Philips PNX4008 mobile platform.
 
@@ -438,7 +447,8 @@ config ARCH_PXA
         depends on MMU
         select ARCH_MTD_XIP
         select GENERIC_GPIO
-        select HAVE_GPIO_LIB
+        select HAVE_CLK
+        select ARCH_REQUIRE_GPIOLIB
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
         select TICK_ONESHOT
@@ -468,14 +478,16 @@ config ARCH_SA1100
         select GENERIC_GPIO
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
+        select HAVE_CLK
         select TICK_ONESHOT
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         help
           Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
         bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
         select GENERIC_GPIO
+        select HAVE_CLK
         help
           Samsung S3C2410X CPU based systems, such as the Simtec Electronics
           BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -503,13 +515,15 @@ config ARCH_DAVINCI
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
         select GENERIC_GPIO
+        select HAVE_CLK
         help
           Support for TI's DaVinci platform.
 
 config ARCH_OMAP
         bool "TI OMAP"
         select GENERIC_GPIO
-        select HAVE_GPIO_LIB
+        select HAVE_CLK
+        select ARCH_REQUIRE_GPIOLIB
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
         help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b20995a82e04..2f0747744236 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -67,7 +67,7 @@ tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)      :=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)     :=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)      :=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946T)      :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)      :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
 tune-$(CONFIG_CPU_ARM920T)      :=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)      :=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)      :=-mtune=arm9tdmi
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 9b444022cb9b..7145cc7c04f0 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -217,8 +217,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern char input_data_end[];
@@ -227,64 +225,21 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void putstr(const char *);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
-#define HEAP_SIZE 0x3000
-
-#include "../../../../lib/inflate.c"
-
-#ifndef STANDALONE_DEBUG
-static void *malloc(int size)
-{
-        void *p;
-
-        if (size <0) error("Malloc error");
-        if (free_mem_ptr <= 0) error("Memory error");
-
-        free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
-        p = (void *)free_mem_ptr;
-        free_mem_ptr += size;
-
-        if (free_mem_ptr >= free_mem_ptr_end)
-                error("Out of memory");
-        return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-        arch_decomp_wdog();
-        *ptr = (void *) free_mem_ptr;
-}
+#ifdef STANDALONE_DEBUG
+#define NO_INFLATE_MALLOC
+#endif
 
-static void gzip_release(void **ptr)
-{
-        arch_decomp_wdog();
-        free_mem_ptr = (long) *ptr;
-}
-#else
-static void gzip_mark(void **ptr)
-{
-}
+#define ARCH_HAS_DECOMP_WDOG
 
-static void gzip_release(void **ptr)
-{
-}
-#endif
+#include "../../../../lib/inflate.c"
 
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
@@ -348,7 +303,7 @@ decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
 {
         output_data             = (uch *)output_start;  /* Points to kernel start */
         free_mem_ptr            = free_mem_ptr_p;
-        free_mem_ptr_end        = free_mem_ptr_end_p;
+        free_mem_end_ptr        = free_mem_ptr_end_p;
         __machine_arch_type     = arch_id;
 
         arch_decomp_setup();
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 2744673314b4..69130f365904 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -280,7 +280,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
         /*
          * Trying to unmap an invalid mapping
          */
-        if (dma_mapping_error(dma_addr)) {
+        if (dma_mapping_error(dev, dma_addr)) {
                 dev_err(dev, "Trying to unmap invalid mapping\n");
                 return;
         }
@@ -554,9 +554,8 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
         device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
         if (!device_info) {
-                printk(KERN_ERR
-                        "Could not allocated dmabounce_device_info for %s",
-                        dev->bus_id);
+                dev_err(dev,
+                        "Could not allocated dmabounce_device_info\n");
                 return -ENOMEM;
         }
 
@@ -594,8 +593,7 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
         dev->archdata.dmabounce = device_info;
 
-        printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
-                dev->bus_id, dev->bus->name);
+        dev_info(dev, "dmabounce: registered device\n");
 
         return 0;
 
@@ -614,16 +612,15 @@ dmabounce_unregister_dev(struct device *dev)
         dev->archdata.dmabounce = NULL;
 
         if (!device_info) {
-                printk(KERN_WARNING
-                        "%s: Never registered with dmabounce but attempting" \
-                        "to unregister!\n", dev->bus_id);
+                dev_warn(dev,
+                         "Never registered with dmabounce but attempting"
+                         "to unregister!\n");
                 return;
         }
 
         if (!list_empty(&device_info->safe_buffers)) {
-                printk(KERN_ERR
-                        "%s: Removing from dmabounce with pending buffers!\n",
-                        dev->bus_id);
+                dev_err(dev,
+                        "Removing from dmabounce with pending buffers!\n");
                 BUG();
         }
 
@@ -639,8 +636,7 @@ dmabounce_unregister_dev(struct device *dev)
 
         kfree(device_info);
 
-        printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
-                dev->bus_id, dev->bus->name);
+        dev_info(dev, "dmabounce: device unregistered\n");
 }
 
 
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index d973c986f721..85579654d3b7 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type)
 
         mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
 
-        if (type == IRQT_PROBE) {
+        if (type == IRQ_TYPE_PROBE) {
                 if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
                         return 0;
-                type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+                type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
         }
 
-        if (type & __IRQT_RISEDGE)
+        if (type & IRQ_TYPE_EDGE_RISING)
                 GPIO_IRQ_rising_edge |= mask;
         else
                 GPIO_IRQ_rising_edge &= ~mask;
-        if (type & __IRQT_FALEDGE)
+        if (type & IRQ_TYPE_EDGE_FALLING)
                 GPIO_IRQ_falling_edge |= mask;
         else
                 GPIO_IRQ_falling_edge &= ~mask;
@@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip)
         /*
          * Install handler for IRQ_LOCOMO_HW.
          */
-        set_irq_type(lchip->irq, IRQT_FALLING);
+        set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
         set_irq_chip_data(lchip->irq, irqbase);
         set_irq_chained_handler(lchip->irq, locomo_handler);
 
@@ -543,7 +543,6 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
                 goto out;
         }
 
-        strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
         /*
          * If the parent device has a DMA mask associated with it,
          * propagate it down to the children.
@@ -553,6 +552,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
                 dev->dev.dma_mask = &dev->dma_mask;
         }
 
+        dev_set_name(&dev->dev, "%s", info->name);
         dev->devid       = info->devid;
         dev->dev.parent  = lchip->dev;
         dev->dev.bus     = &locomo_bus_type;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index eb06d0b2cb74..f6d3fdda7067 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
         void __iomem *mapbase = get_irq_chip_data(irq);
         unsigned long ip0;
 
-        if (flags == IRQT_PROBE)
+        if (flags == IRQ_TYPE_PROBE)
                 return 0;
 
-        if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+        if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
                 return -EINVAL;
 
         ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
-        if (flags & __IRQT_RISEDGE)
+        if (flags & IRQ_TYPE_EDGE_RISING)
                 ip0 &= ~mask;
         else
                 ip0 |= mask;
@@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
         void __iomem *mapbase = get_irq_chip_data(irq);
         unsigned long ip1;
 
-        if (flags == IRQT_PROBE)
+        if (flags == IRQ_TYPE_PROBE)
                 return 0;
 
-        if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+        if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
                 return -EINVAL;
 
         ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
-        if (flags & __IRQT_RISEDGE)
+        if (flags & IRQ_TYPE_EDGE_RISING)
                 ip1 &= ~mask;
         else
                 ip1 |= mask;
@@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
         /*
          * Register SA1111 interrupt
          */
-        set_irq_type(sachip->irq, IRQT_RISING);
+        set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
         set_irq_data(sachip->irq, irqbase);
         set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
 }
@@ -550,9 +550,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
                 goto out;
         }
 
-        snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
-                 "%4.4lx", info->offset);
-
+        dev_set_name(&dev->dev, "%4.4lx", info->offset);
         dev->devid       = info->devid;
         dev->dev.parent  = sachip->dev;
         dev->dev.bus     = &sa1111_bus_type;
@@ -560,7 +558,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
         dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
         dev->res.start   = sachip->phys + info->offset;
         dev->res.end     = dev->res.start + 511;
-        dev->res.name    = dev->dev.bus_id;
+        dev->res.name    = dev_name(&dev->dev);
         dev->res.flags   = IORESOURCE_MEM;
         dev->mapbase     = sachip->base + info->offset;
         dev->skpcr_mask  = info->skpcr_mask;
@@ -570,6 +568,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
         if (ret) {
                 printk("SA1111: failed to allocate resource for %s\n",
                         dev->res.name);
+                dev_set_name(&dev->dev, NULL);
                 kfree(dev);
                 goto out;
         }
@@ -593,7 +592,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
                 if (dev->dma_mask != 0xffffffffUL) {
                         ret = dmabounce_register_dev(&dev->dev, 1024, 4096);
                         if (ret) {
-                                printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id);
+                                dev_err(&dev->dev, "SA1111: Failed to register"
+                                        " with dmabounce\n");
                                 device_unregister(&dev->dev);
                         }
                 }
@@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
         if (!sachip)
                 return -ENOMEM;
 
-        sachip->clk = clk_get(me, "GPIO27_CLK");
+        sachip->clk = clk_get(me, "SA1111_CLK");
         if (!sachip->clk) {
                 ret = PTR_ERR(sachip->clk);
                 goto err_free;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index bc299b07a6fa..ae39553589dd 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -247,7 +247,7 @@ static int __devinit scoop_probe(struct platform_device *pdev)
         devptr->gpio.base = -1;
 
         if (inf->gpio_base != 0) {
-                devptr->gpio.label = pdev->dev.bus_id;
+                devptr->gpio.label = dev_name(&pdev->dev);
                 devptr->gpio.base = inf->gpio_base;
                 devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
                 devptr->gpio.set = scoop_gpio_set;
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index 493ecee24f94..2307587a38a9 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -1,15 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh17
-# Fri Nov  9 20:23:03 2007
+# Linux kernel version: 2.6.26
+# Sat Jul 26 22:28:46 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -18,75 +22,90 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -100,6 +119,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
@@ -111,21 +131,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
@@ -133,80 +158,48 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
-CONFIG_TOSHIBA_TMIO_OHCI=y
-CONFIG_ARCH_ESERIES=y
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_ARCH_PXA_ESERIES=y
 CONFIG_MACH_E330=y
+CONFIG_MACH_E350=y
 CONFIG_MACH_E740=y
 CONFIG_MACH_E750=y
 CONFIG_MACH_E400=y
 CONFIG_MACH_E800=y
-CONFIG_E330_LCD=y
-CONFIG_E740_LCD=y
-CONFIG_E750_LCD=y
-CONFIG_E400_LCD=y
-CONFIG_E800_LCD=y
-CONFIG_ESERIES_UDC=y
-CONFIG_E330_TC6387XB=y
-CONFIG_E740_T7L66XB=y
-CONFIG_E400_T7L66XB=y
-CONFIG_E750_E800_TC6393XB=y
-CONFIG_E740_PCMCIA=m
-CONFIG_E750_PCMCIA=m
-CONFIG_E800_PCMCIA=m
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXC550 is not set
-# CONFIG_PXA_SHARPSL is not set
 # CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA25x=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
 
 #
-# Linux As Bootloader
+# Power management
 #
-# CONFIG_LAB is not set
 
 #
 # Processor Type
@@ -215,6 +208,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -232,11 +226,9 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
 CONFIG_PCMCIA_LOAD_CIS=y
@@ -245,11 +237,14 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-CONFIG_PCMCIA_PXA2XX=m
 
 #
 # Kernel Features
 #
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -262,9 +257,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -275,7 +274,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
+CONFIG_ATAGS_PROC=y
 
 #
 # CPU Frequency scaling
@@ -304,11 +303,12 @@ CONFIG_BINFMT_MISC=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
-# CONFIG_DPM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -318,13 +318,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -339,35 +339,40 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -380,10 +385,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -391,15 +392,74 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=y
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -408,38 +468,32 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_PARTITIONS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
 # CONFIG_MTD_BLOCK_RO is not set
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -459,7 +513,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -482,82 +535,43 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
@@ -565,7 +579,7 @@ CONFIG_SCSI=m
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=m
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
@@ -579,6 +593,7 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -586,132 +601,78 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
 # CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
+# CONFIG_LIBERTAS is not set
+CONFIG_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
 # CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 # CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=m
-# CONFIG_HOSTAP_FIRMWARE is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -719,38 +680,48 @@ CONFIG_NET_WIRELESS=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -763,9 +734,11 @@ CONFIG_TOUCHSCREEN_WM9713=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -777,25 +750,12 @@ CONFIG_HW_CONSOLE=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_PXA is not set
-# CONFIG_RS232_SERIAL is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
 
 #
 # PCMCIA character devices
@@ -803,117 +763,79 @@ CONFIG_HW_RANDOM=m
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
+# I2C GPIO expanders:
 #
 
 #
-# Multimedia Capabilities Port drivers
+# PCI GPIO expanders:
 #
-# CONFIG_ADC is not set
 
 #
-# Compaq/iPAQ Drivers
+# SPI GPIO expanders:
 #
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Compaq/HP iPAQ Drivers
+# Sonics Silicon Backplane
 #
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+CONFIG_MFD_CORE=y
 # CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-CONFIG_SOC_T7L66XB=y
-# CONFIG_SOC_TC6387XB is not set
-CONFIG_SOC_TC6393XB=y
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
+# CONFIG_HTC_PASIC3 is not set
+CONFIG_MFD_TC6393XB=y
 
 #
-# LED Triggers
+# Multimedia devices
 #
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -923,14 +845,25 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # Frame buffer hardware drivers
 #
-# CONFIG_FB_IMAGEON is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
+# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -938,6 +871,7 @@ CONFIG_FB_W100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 # CONFIG_FONT_8x8 is not set
@@ -945,28 +879,13 @@ CONFIG_FONTS=y
 # CONFIG_FONT_6x11 is not set
 # CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
-CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -980,125 +899,75 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
+CONFIG_SND_ARM=y
 # CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC_AC97_BUS=y
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
+CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
 CONFIG_SND_PXA2XX_SOC_AC97=m
-CONFIG_SND_PXA2XX_SOC_E740_WM9705=m
-CONFIG_SND_PXA2XX_SOC_E750_WM9705=m
-CONFIG_SND_PXA2XX_SOC_E800_WM9712=m
-# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
-# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set
-# CONFIG_SND_PXA2XX_SOC_H5000 is not set
-
-#
-# SoC Audio for the Freescale i.MX
-#
-
-#
-# SoC Audio for the Samsung S3C24XX
-#
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8772 is not set
-# CONFIG_SND_SOC_WM8971 is not set
-# CONFIG_SND_SOC_WM8956 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8976 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8980 is not set
-CONFIG_SND_SOC_WM9705=m
-# CONFIG_SND_SOC_WM9713 is not set
+CONFIG_SND_PXA2XX_SOC_E800=m
 CONFIG_SND_SOC_WM9712=m
-# CONFIG_SND_SOC_UDA1380 is not set
-# CONFIG_SND_SOC_AK4535 is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# HID Devices
+# USB Input Devices
 #
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1107,68 +976,19 @@ CONFIG_USB_DYNAMIC_MINORS=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1192,56 +1012,57 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=y
+CONFIG_USB_PXA25X_SMALL=y
+# CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
 
 #
-# MMC/SD Card support
+# MMC/SD Card Drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-CONFIG_MMC_TMIO=y
-# CONFIG_MMC_SAMCOP is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# Real Time Clock
+# MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_PXA is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1255,14 +1076,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1292,7 +1110,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1305,30 +1122,21 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1341,7 +1149,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1363,10 +1170,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1407,30 +1211,32 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -1438,61 +1244,102 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
new file mode 100644
index 000000000000..2a84d557adc2
--- /dev/null
+++ b/arch/arm/configs/ezx_defconfig
@@ -0,0 +1,1614 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc3
+# Mon Jul  7 17:52:21 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_PXA_EZX=y
+CONFIG_MACH_EZX_A780=y
+CONFIG_MACH_EZX_E680=y
+CONFIG_MACH_EZX_A1200=y
+CONFIG_MACH_EZX_A910=y
+CONFIG_MACH_EZX_E6=y
+CONFIG_MACH_EZX_E2=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_EZX_PCAP=y
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_PXA27x is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index eb9092ca8008..1d296fc8494e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
 obj-$(CONFIG_ATAGS_PROC)        += atags.o
 obj-$(CONFIG_OABI_COMPAT)       += sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)       += thumbee.o
+obj-$(CONFIG_KGDB)              += kgdb.o
 
 obj-$(CONFIG_CRUNCH)            += crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o            := -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 8bfd299bfe77..f5cfdabcb87d 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -783,7 +783,7 @@ static void ecard_proc_init(void)
 
 #define ec_set_resource(ec,nr,st,sz)                            \
         do {                                                    \
-                (ec)->resource[nr].name = ec->dev.bus_id;       \
+                (ec)->resource[nr].name = dev_name(&ec->dev);   \
                 (ec)->resource[nr].start = st;                  \
                 (ec)->resource[nr].end = (st) + (sz) - 1;       \
                 (ec)->resource[nr].flags = IORESOURCE_MEM;      \
@@ -853,8 +853,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
         for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
                 if (ec->resource[i].flags &&
                     request_resource(&iomem_resource, &ec->resource[i])) {
-                        printk(KERN_ERR "%s: resource(s) not available\n",
-                                ec->dev.bus_id);
+                        dev_err(&ec->dev, "resource(s) not available\n");
                         ec->resource[i].end -= ec->resource[i].start;
                         ec->resource[i].start = 0;
                         ec->resource[i].flags = 0;
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
new file mode 100644
index 000000000000..aaffaecffcd1
--- /dev/null
+++ b/arch/arm/kernel/kgdb.c
@@ -0,0 +1,201 @@
+/*
+ * arch/arm/kernel/kgdb.c
+ *
+ * ARM KGDB support
+ *
+ * Copyright (c) 2002-2004 MontaVista Software, Inc
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:  George Davis <davis_g@mvista.com>
+ *           Deepak Saxena <dsaxena@plexity.net>
+ */
+#include <linux/kgdb.h>
+#include <asm/traps.h>
+
+/* Make a local copy of the registers passed into the handler (bletch) */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+        int regno;
+
+        /* Initialize all to zero. */
+        for (regno = 0; regno < GDB_MAX_REGS; regno++)
+                gdb_regs[regno] = 0;
+
+        gdb_regs[_R0]           = kernel_regs->ARM_r0;
+        gdb_regs[_R1]           = kernel_regs->ARM_r1;
+        gdb_regs[_R2]           = kernel_regs->ARM_r2;
+        gdb_regs[_R3]           = kernel_regs->ARM_r3;
+        gdb_regs[_R4]           = kernel_regs->ARM_r4;
+        gdb_regs[_R5]           = kernel_regs->ARM_r5;
+        gdb_regs[_R6]           = kernel_regs->ARM_r6;
+        gdb_regs[_R7]           = kernel_regs->ARM_r7;
+        gdb_regs[_R8]           = kernel_regs->ARM_r8;
+        gdb_regs[_R9]           = kernel_regs->ARM_r9;
+        gdb_regs[_R10]          = kernel_regs->ARM_r10;
+        gdb_regs[_FP]           = kernel_regs->ARM_fp;
+        gdb_regs[_IP]           = kernel_regs->ARM_ip;
+        gdb_regs[_SPT]          = kernel_regs->ARM_sp;
+        gdb_regs[_LR]           = kernel_regs->ARM_lr;
+        gdb_regs[_PC]           = kernel_regs->ARM_pc;
+        gdb_regs[_CPSR]         = kernel_regs->ARM_cpsr;
+}
+
+/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+        kernel_regs->ARM_r0     = gdb_regs[_R0];
+        kernel_regs->ARM_r1     = gdb_regs[_R1];
+        kernel_regs->ARM_r2     = gdb_regs[_R2];
+        kernel_regs->ARM_r3     = gdb_regs[_R3];
+        kernel_regs->ARM_r4     = gdb_regs[_R4];
+        kernel_regs->ARM_r5     = gdb_regs[_R5];
+        kernel_regs->ARM_r6     = gdb_regs[_R6];
+        kernel_regs->ARM_r7     = gdb_regs[_R7];
+        kernel_regs->ARM_r8     = gdb_regs[_R8];
+        kernel_regs->ARM_r9     = gdb_regs[_R9];
+        kernel_regs->ARM_r10    = gdb_regs[_R10];
+        kernel_regs->ARM_fp     = gdb_regs[_FP];
+        kernel_regs->ARM_ip     = gdb_regs[_IP];
+        kernel_regs->ARM_sp     = gdb_regs[_SPT];
+        kernel_regs->ARM_lr     = gdb_regs[_LR];
+        kernel_regs->ARM_pc     = gdb_regs[_PC];
+        kernel_regs->ARM_cpsr   = gdb_regs[_CPSR];
+}
+
+void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
+{
+        struct pt_regs *thread_regs;
+        int regno;
+
+        /* Just making sure... */
+        if (task == NULL)
+                return;
+
+        /* Initialize to zero */
+        for (regno = 0; regno < GDB_MAX_REGS; regno++)
+                gdb_regs[regno] = 0;
+
+        /* Otherwise, we have only some registers from switch_to() */
+        thread_regs             = task_pt_regs(task);
+        gdb_regs[_R0]           = thread_regs->ARM_r0;
+        gdb_regs[_R1]           = thread_regs->ARM_r1;
+        gdb_regs[_R2]           = thread_regs->ARM_r2;
+        gdb_regs[_R3]           = thread_regs->ARM_r3;
+        gdb_regs[_R4]           = thread_regs->ARM_r4;
+        gdb_regs[_R5]           = thread_regs->ARM_r5;
+        gdb_regs[_R6]           = thread_regs->ARM_r6;
+        gdb_regs[_R7]           = thread_regs->ARM_r7;
+        gdb_regs[_R8]           = thread_regs->ARM_r8;
+        gdb_regs[_R9]           = thread_regs->ARM_r9;
+        gdb_regs[_R10]          = thread_regs->ARM_r10;
+        gdb_regs[_FP]           = thread_regs->ARM_fp;
+        gdb_regs[_IP]           = thread_regs->ARM_ip;
+        gdb_regs[_SPT]          = thread_regs->ARM_sp;
+        gdb_regs[_LR]           = thread_regs->ARM_lr;
+        gdb_regs[_PC]           = thread_regs->ARM_pc;
+        gdb_regs[_CPSR]         = thread_regs->ARM_cpsr;
+}
+
+static int compiled_break;
+
+int kgdb_arch_handle_exception(int exception_vector, int signo,
+                               int err_code, char *remcom_in_buffer,
+                               char *remcom_out_buffer,
+                               struct pt_regs *linux_regs)
+{
+        unsigned long addr;
+        char *ptr;
+
+        switch (remcom_in_buffer[0]) {
+        case 'D':
+        case 'k':
+        case 'c':
+                kgdb_contthread = NULL;
+
+                /*
+                 * Try to read optional parameter, pc unchanged if no parm.
+                 * If this was a compiled breakpoint, we need to move
+                 * to the next instruction or we will just breakpoint
+                 * over and over again.
+                 */
+                ptr = &remcom_in_buffer[1];
+                if (kgdb_hex2long(&ptr, &addr))
+                        linux_regs->ARM_pc = addr;
+                else if (compiled_break == 1)
+                        linux_regs->ARM_pc += 4;
+
+                compiled_break = 0;
+
+                return 0;
+        }
+
+        return -1;
+}
+
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+        kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+        return 0;
+}
+
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+        compiled_break = 1;
+        kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+        return 0;
+}
+
+static struct undef_hook kgdb_brkpt_hook = {
+        .instr_mask             = 0xffffffff,
+        .instr_val              = KGDB_BREAKINST,
+        .fn                     = kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_hook = {
+        .instr_mask             = 0xffffffff,
+        .instr_val              = KGDB_COMPILED_BREAK,
+        .fn                     = kgdb_compiled_brk_fn
+};
+
+/**
+ *      kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ *      This function will handle the initalization of any architecture
+ *      specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+        register_undef_hook(&kgdb_brkpt_hook);
+        register_undef_hook(&kgdb_compiled_brkpt_hook);
+
+        return 0;
+}
+
+/**
+ *      kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *      This function will handle the uninitalization of any architecture
+ *      specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+        unregister_undef_hook(&kgdb_brkpt_hook);
+        unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+}
+
+/*
+ * Register our undef instruction hooks with ARM undef core.
+ * We regsiter a hook specifically looking for the KGB break inst
+ * and we handle the normal undef case within the do_undefinstr
+ * handler.
+ */
+struct kgdb_arch arch_kgdb_ops = {
+#ifndef __ARMEB__
+        .gdb_bpt_instr          = {0xfe, 0xde, 0xff, 0xe7}
+#else /* ! __ARMEB__ */
+        .gdb_bpt_instr          = {0xe7, 0xff, 0xde, 0xfe}
+#endif
+};
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 5ee39e10c8d1..d28513f14d05 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -296,8 +296,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
         unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
         INIT_HLIST_HEAD(&empty_rp);
-        spin_lock_irqsave(&kretprobe_lock, flags);
-        head = kretprobe_inst_table_head(current);
+        kretprobe_hash_lock(current, &head, &flags);
 
         /*
          * It is possible to have multiple instances associated with a given
@@ -337,7 +336,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
         }
 
         kretprobe_assert(ri, orig_ret_address, trampoline_address);
-        spin_unlock_irqrestore(&kretprobe_lock, flags);
+        kretprobe_hash_unlock(current, &flags);
 
         hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
                 hlist_del(&ri->hlist);
@@ -347,7 +346,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
         return (void *)orig_ret_address;
 }
 
-/* Called with kretprobe_lock held. */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
                                       struct pt_regs *regs)
 {
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 79b7e5cf5416..a68259a0cccd 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/moduleloader.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 199b3680118b..89bfded70a1f 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -162,7 +162,7 @@ void cpu_idle(void)
                 if (!idle)
                         idle = default_idle;
                 leds_event(led_idle_start);
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 while (!need_resched())
                         idle();
                 leds_event(led_idle_end);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b7b0720bc1bb..38f0e7940a13 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <asm/traps.h>
 
 #include "compat.h"
 #include "atags.h"
@@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p)
         conswitchp = &dummy_con;
 #endif
 #endif
+        early_trap_init();
 }
 
 
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index cc5145b28e7f..368d171754cf 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -130,7 +130,9 @@ static const struct leds_evt_name evt_names[] = {
         { "red",   led_red_on,   led_red_off   },
 };
 
-static ssize_t leds_store(struct sys_device *dev, const char *buf, size_t size)
+static ssize_t leds_store(struct sys_device *dev,
+                        struct sysdev_attribute *attr,
+                        const char *buf, size_t size)
 {
         int ret = -EINVAL, len = strcspn(buf, " ");
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 5595fdd75e82..7277aef83098 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -708,6 +708,11 @@ EXPORT_SYMBOL(abort);
 
 void __init trap_init(void)
 {
+        return;
+}
+
+void __init early_trap_init(void)
+{
         unsigned long vectors = CONFIG_VECTORS_BASE;
         extern char __stubs_start[], __stubs_end[];
         extern char __vectors_start[], __vectors_end[];
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 747b9dedab88..dc8b40783d94 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -377,7 +377,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -395,7 +395,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91cap9_nand_device = {
-        .name           = "at91_nand",
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -404,7 +404,7 @@ static struct platform_device at91cap9_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned long csa, mode;
 
@@ -445,7 +445,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         platform_device_register(&at91cap9_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index de19bee83f75..8ced9bc82099 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -369,7 +369,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -382,7 +382,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91rm9200_nand_device = {
-        .name           = "at91_nand",
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -391,7 +391,7 @@ static struct platform_device at91rm9200_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned int csa;
 
@@ -429,7 +429,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         platform_device_register(&at91rm9200_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 86cba4ac29b1..cae5f52f1278 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -284,7 +284,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -302,7 +302,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9260_nand_device = {
-        .name           = "at91_nand",
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -311,7 +311,7 @@ static struct platform_device at91sam9260_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned long csa, mode;
 
@@ -373,7 +373,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         platform_device_register(&at91sam9260_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ec1891375dfb..483d436af22d 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -199,7 +199,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -211,8 +211,8 @@ static struct resource nand_resources[] = {
         }
 };
 
-static struct platform_device at91_nand_device = {
-        .name           = "at91_nand",
+static struct platform_device atmel_nand_device = {
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -221,7 +221,7 @@ static struct platform_device at91_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned long csa, mode;
 
@@ -262,11 +262,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         at91_set_A_periph(AT91_PIN_PC1, 0);             /* NANDWE */
 
         nand_data = *data;
-        platform_device_register(&at91_nand_device);
+        platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 8a81f76f0200..9762b15f658a 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -353,7 +353,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -371,7 +371,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9263_nand_device = {
-        .name           = "at91_nand",
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -380,7 +380,7 @@ static struct platform_device at91sam9263_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned long csa, mode;
 
@@ -421,7 +421,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         platform_device_register(&at91sam9263_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index ae28101e7542..5f3094870cad 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -195,7 +195,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
 
@@ -212,8 +212,8 @@ static struct resource nand_resources[] = {
         }
 };
 
-static struct platform_device at91_nand_device = {
-        .name           = "at91_nand",
+static struct platform_device atmel_nand_device = {
+        .name           = "atmel_nand",
         .id             = -1,
         .dev            = {
                                 .platform_data  = &nand_data,
@@ -222,7 +222,7 @@ static struct platform_device at91_nand_device = {
         .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
         unsigned long csa;
 
@@ -259,11 +259,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
         at91_set_A_periph(AT91_PIN_PB5, 0);             /* NANDWE */
 
         nand_data = *data;
-        platform_device_register(&at91_nand_device);
+        platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index b22a1a004055..af2c33aff1a8 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -142,7 +142,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return cam60_nand_partition;
 }
 
-static struct at91_nand_data __initdata cam60_nand_data = {
+static struct atmel_nand_data __initdata cam60_nand_data = {
         .ale            = 21,
         .cle            = 22,
         // .det_pin     = ... not there
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 8a2a958639db..117cf6c9afce 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -181,7 +181,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return cap9adk_nand_partitions;
 }
 
-static struct at91_nand_data __initdata cap9adk_nand_data = {
+static struct atmel_nand_data __initdata cap9adk_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
@@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void)
         /* Serial */
         at91_add_device_serial();
         /* USB Host */
-        set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
+        set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
         at91_add_device_usbh(&cap9adk_usbh_data);
         /* USB HS */
-        set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
+        set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
         at91_add_device_usba(&cap9adk_usba_udc_data);
         /* SPI */
         at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
@@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void)
         /* I2C */
         at91_add_device_i2c(NULL, 0);
         /* LCD Controller */
-        set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
+        set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
         at91_add_device_lcdc(&cap9adk_lcdc_data);
         /* AC97 */
         at91_add_device_ac97(&cap9adk_ac97_data);
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index dab958d25926..02a70b2f355b 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -147,7 +147,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return dk_nand_partition;
 }
 
-static struct at91_nand_data __initdata dk_nand_data = {
+static struct atmel_nand_data __initdata dk_nand_data = {
         .ale            = 22,
         .cle            = 21,
         .det_pin        = AT91_PIN_PB1,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index cb065febd95e..082ed59365a4 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -105,7 +105,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return kb9202_nand_partition;
 }
 
-static struct at91_nand_data __initdata kb9202_nand_data = {
+static struct atmel_nand_data __initdata kb9202_nand_data = {
         .ale            = 22,
         .cle            = 21,
         // .det_pin     = ... not there
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 8f76af5e219a..57a6221943ed 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -141,7 +141,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4d1d9c777084..6a680795c3c8 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -178,7 +178,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 08382c0df221..43dfbd0d543a 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -183,7 +183,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 22,
         .cle            = 21,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b4cd5d0ed597..6605a0980117 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -187,7 +187,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b6a70fc735c3..66e77bb2e079 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -96,7 +96,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 7079050ab88d..bbbfd06f5e0c 100755..100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -180,7 +180,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return yl9200_nand_partition;
 }
 
-static struct at91_nand_data __initdata yl9200_nand_data = {
+static struct atmel_nand_data __initdata yl9200_nand_data = {
         .ale            = 6,
         .cle            = 7,
         // .det_pin     = ... not connected
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 78a5cdb746dc..ca87587b2b4b 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -56,19 +56,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
         unsigned int smr, srctype;
 
         switch (type) {
-        case IRQT_HIGH:
+        case IRQ_TYPE_LEVEL_HIGH:
                 srctype = AT91_AIC_SRCTYPE_HIGH;
                 break;
-        case IRQT_RISING:
+        case IRQ_TYPE_EDGE_RISING:
                 srctype = AT91_AIC_SRCTYPE_RISING;
                 break;
-        case IRQT_LOW:
+        case IRQ_TYPE_LEVEL_LOW:
                 if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))         /* only supported on external interrupts */
                         srctype = AT91_AIC_SRCTYPE_LOW;
                 else
                         return -EINVAL;
                 break;
-        case IRQT_FALLING:
+        case IRQ_TYPE_EDGE_FALLING:
                 if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))         /* only supported on external interrupts */
                         srctype = AT91_AIC_SRCTYPE_FALLING;
                 else
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 1d7bca6aa441..5fed57608507 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq)
         int port = line >> 3;
         int port_mask = 1 << (line & 7);
 
-        if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+        if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
                 gpio_int_type2[port] ^= port_mask; /* switch edge direction */
                 ep93xx_gpio_update_int_params(port);
         }
@@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
         int port = line >> 3;
         int port_mask = 1 << (line & 7);
 
-        if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE)
+        if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
                 gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 
         gpio_int_unmasked[port] &= ~port_mask;
@@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
         gpio_direction_input(gpio);
 
         switch (type) {
-        case IRQT_RISING:
+        case IRQ_TYPE_EDGE_RISING:
                 gpio_int_type1[port] |= port_mask;
                 gpio_int_type2[port] |= port_mask;
                 desc->handle_irq = handle_edge_irq;
                 break;
-        case IRQT_FALLING:
+        case IRQ_TYPE_EDGE_FALLING:
                 gpio_int_type1[port] |= port_mask;
                 gpio_int_type2[port] &= ~port_mask;
                 desc->handle_irq = handle_edge_irq;
                 break;
-        case IRQT_HIGH:
+        case IRQ_TYPE_LEVEL_HIGH:
                 gpio_int_type1[port] &= ~port_mask;
                 gpio_int_type2[port] |= port_mask;
                 desc->handle_irq = handle_level_irq;
                 break;
-        case IRQT_LOW:
+        case IRQ_TYPE_LEVEL_LOW:
                 gpio_int_type1[port] &= ~port_mask;
                 gpio_int_type2[port] &= ~port_mask;
                 desc->handle_irq = handle_level_irq;
                 break;
-        case IRQT_BOTHEDGE:
+        case IRQ_TYPE_EDGE_BOTH:
                 gpio_int_type1[port] |= port_mask;
                 /* set initial polarity based on current input level */
                 if (gpio_get_value(gpio))
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index e6695c4e623b..e1b1f028b930 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
         reg = irq >> 5;
         bit = 1 << (irq % 32);
 
-        if (type == IRQT_PROBE) {
+        if (type == IRQ_TYPE_PROBE) {
                 /* Don't mess with enabled GPIOs using preconfigured edges or
                    GPIOs set to alternate function during probe */
                 /* TODO: support probe */
@@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 //                      return 0;
 //              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
 //                      return 0;
-//              type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
         }
 
         GIUS(reg) |= bit;
@@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 
         DEBUG_IRQ("setting type of irq %d to ", _irq);
 
-        if (type & __IRQT_RISEDGE) {
+        if (type & IRQ_TYPE_EDGE_RISING) {
                 DEBUG_IRQ("rising edges\n");
                 irq_type = 0x0;
         }
-        if (type & __IRQT_FALEDGE) {
+        if (type & IRQ_TYPE_EDGE_FALLING) {
                 DEBUG_IRQ("falling edges\n");
                 irq_type = 0x1;
         }
-        if (type & __IRQT_LOWLVL) {
+        if (type & IRQ_TYPE_LEVEL_LOW) {
                 DEBUG_IRQ("low level\n");
                 irq_type = 0x3;
         }
-        if (type & __IRQT_HIGHLVL) {
+        if (type & IRQ_TYPE_LEVEL_HIGH) {
                 DEBUG_IRQ("high level\n");
                 irq_type = 0x2;
         }
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 62e653a3ea1a..5a1588cf8242 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -393,9 +393,7 @@ static int impd1_probe(struct lm_device *dev)
                 if (!d)
                         continue;
 
-                snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
-                         "lm%x:%5.5lx", dev->id, idev->offset >> 12);
-
+                dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
                 d->dev.parent   = &dev->dev;
                 d->res.start    = dev->resource.start + idev->offset;
                 d->res.end      = d->res.start + SZ_4K - 1;
@@ -407,8 +405,7 @@ static int impd1_probe(struct lm_device *dev)
 
                 ret = amba_device_register(d, &dev->resource);
                 if (ret) {
-                        printk("unable to register device %s: %d\n",
-                                d->dev.bus_id, ret);
+                        dev_err(&d->dev, "unable to register device: %d\n");
                         kfree(d);
                 }
         }
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index 622cdc4212dd..f939c5091405 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -81,8 +81,10 @@ int lm_device_register(struct lm_device *dev)
         dev->dev.release = lm_device_release;
         dev->dev.bus = &lm_bustype;
 
-        snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "lm%d", dev->id);
-        dev->resource.name = dev->dev.bus_id;
+        ret = dev_set_name(&dev->dev, "lm%d", dev->id);
+        if (ret)
+                return ret;
+        dev->resource.name = dev_name(&dev->dev);
 
         ret = request_resource(&iomem_resource, &dev->resource);
         if (ret == 0) {
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 2741063bf361..28f164ea4726 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -17,6 +17,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/f75375s.h>
+#include <linux/leds-pca9532.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -206,6 +207,53 @@ static struct f75375s_platform_data n2100_f75375s = {
         .pwm_enable = { 0, 0 },
 };
 
+static struct pca9532_platform_data n2100_leds = {
+        .leds = {
+        {       .name = "n2100:red:satafail0",
+                .state = PCA9532_OFF,
+                .type = PCA9532_TYPE_LED,
+        },
+        {       .name = "n2100:red:satafail1",
+                .state = PCA9532_OFF,
+                .type = PCA9532_TYPE_LED,
+        },
+        {       .name = "n2100:blue:usb",
+                .state = PCA9532_OFF,
+                .type = PCA9532_TYPE_LED,
+        },
+        {       .type = PCA9532_TYPE_NONE },
+
+        {       .type = PCA9532_TYPE_NONE },
+        {       .type = PCA9532_TYPE_NONE },
+        {       .type = PCA9532_TYPE_NONE },
+        {       .name = "n2100:red:usb",
+                .state = PCA9532_OFF,
+                .type = PCA9532_TYPE_LED,
+        },
+
+        {       .type = PCA9532_TYPE_NONE }, /* power OFF gpio */
+        {       .type = PCA9532_TYPE_NONE }, /* reset gpio */
+        {       .type = PCA9532_TYPE_NONE },
+        {       .type = PCA9532_TYPE_NONE },
+
+        {       .type = PCA9532_TYPE_NONE },
+        {       .name = "n2100:orange:system",
+                .state = PCA9532_OFF,
+                .type = PCA9532_TYPE_LED,
+        },
+        {       .name = "n2100:red:system",
+                .state = PCA9532_OFF,
+                .type = PCA9532_TYPE_LED,
+        },
+        {       .name = "N2100 beeper"  ,
+                .state =  PCA9532_OFF,
+                .type = PCA9532_TYPE_N2100_BEEP,
+        },
+        },
+        .psc = { 0, 0 },
+        .pwm = { 0, 0 },
+};
+
 static struct i2c_board_info __initdata n2100_i2c_devices[] = {
         {
                 I2C_BOARD_INFO("rs5c372b", 0x32),
@@ -214,6 +262,10 @@ static struct i2c_board_info __initdata n2100_i2c_devices[] = {
                 I2C_BOARD_INFO("f75375", 0x2e),
                 .platform_data = &n2100_f75375s,
         },
+        {
+                I2C_BOARD_INFO("pca9532", 0x60),
+                .platform_data = &n2100_leds,
+        },
 };
 
 /*
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 81cdc8267206..daf28074134b 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
         /*
          * Then, set the proper trigger type.
          */
-        if (type & IRQT_FALLING)
+        if (type & IRQ_TYPE_EDGE_FALLING)
                 GPIO_IRQ_falling_edge |= 1 << line;
         else
                 GPIO_IRQ_falling_edge &= ~(1 << line);
-        if (type & IRQT_RISING)
+        if (type & IRQ_TYPE_EDGE_RISING)
                 GPIO_IRQ_rising_edge |= 1 << line;
         else
                 GPIO_IRQ_rising_edge &= ~(1 << line);
-        if (type & IRQT_LOW)
+        if (type & IRQ_TYPE_LEVEL_LOW)
                 GPIO_IRQ_level_low |= 1 << line;
         else
                 GPIO_IRQ_level_low &= ~(1 << line);
-        if (type & IRQT_HIGH)
+        if (type & IRQ_TYPE_LEVEL_HIGH)
                 GPIO_IRQ_level_high |= 1 << line;
         else
                 GPIO_IRQ_level_high &= ~(1 << line);
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 5fea5a132939..df16a4eac490 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -126,23 +126,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
                 return -EINVAL;
 
         switch (type) {
-        case IRQT_BOTHEDGE:
+        case IRQ_TYPE_EDGE_BOTH:
                 int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
                 irq_type = IXP23XX_IRQ_EDGE;
                 break;
-        case IRQT_RISING:
+        case IRQ_TYPE_EDGE_RISING:
                 int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
                 irq_type = IXP23XX_IRQ_EDGE;
                 break;
-        case IRQT_FALLING:
+        case IRQ_TYPE_EDGE_FALLING:
                 int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
                 irq_type = IXP23XX_IRQ_EDGE;
                 break;
-        case IRQT_HIGH:
+        case IRQ_TYPE_LEVEL_HIGH:
                 int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
                 irq_type = IXP23XX_IRQ_LEVEL;
                 break;
-        case IRQT_LOW:
+        case IRQ_TYPE_LEVEL_LOW:
                 int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
                 irq_type = IXP23XX_IRQ_LEVEL;
                 break;
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index f0f70ba1e46d..896ff9f840d9 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 
 static void __init roadrunner_pci_preinit(void)
 {
-        set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
-        set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
+        set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
         ixp23xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 3f867691d9f2..c6e044befccb 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -30,10 +30,10 @@
 
 void __init avila_pci_preinit(void)
 {
-        set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
-        set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
-        set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
-        set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
+        set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3781b3db9f49..3947c506b4f3 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
                 return -EINVAL;
 
         switch (type){
-        case IRQT_BOTHEDGE:
+        case IRQ_TYPE_EDGE_BOTH:
                 int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
                 irq_type = IXP4XX_IRQ_EDGE;
                 break;
-        case IRQT_RISING:
+        case IRQ_TYPE_EDGE_RISING:
                 int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
                 irq_type = IXP4XX_IRQ_EDGE;
                 break;
-        case IRQT_FALLING:
+        case IRQ_TYPE_EDGE_FALLING:
                 int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
                 irq_type = IXP4XX_IRQ_EDGE;
                 break;
-        case IRQT_HIGH:
+        case IRQ_TYPE_LEVEL_HIGH:
                 int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
                 irq_type = IXP4XX_IRQ_LEVEL;
                 break;
-        case IRQT_LOW:
+        case IRQ_TYPE_LEVEL_LOW:
                 int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
                 irq_type = IXP4XX_IRQ_LEVEL;
                 break;
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index ad2e5b97966e..be4f4a208b90 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -27,8 +27,8 @@
 
 void __init coyote_pci_preinit(void)
 {
-        set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
-        set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
+        set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 9db7e1f42011..926d15f885fb 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -25,12 +25,12 @@
 
 void __init dsmg600_pci_preinit(void)
 {
-        set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
-        set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
-        set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
-        set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
-        set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
-        set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
+        set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index f19f3f6feda1..ca12a9ca0830 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -25,9 +25,9 @@
 
 void __init fsg_pci_preinit(void)
 {
-        set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
-        set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
-        set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+        set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index 6abf568322d3..afd1dc14e597 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -29,8 +29,8 @@
 
 void __init gateway7001_pci_preinit(void)
 {
-        set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-        set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+        set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 49dec7868807..20960704183b 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -41,10 +41,10 @@
  */
 void __init gtwx5715_pci_preinit(void)
 {
-        set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW);
-        set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW);
-        set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW);
-        set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW);
+        set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 408796004812..7d9bb4d23104 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -27,10 +27,10 @@
 
 void __init ixdp425_pci_preinit(void)
 {
-        set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW);
-        set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW);
-        set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
-        set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
+        set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index d1e75b7dc3b1..37d9f2e8f602 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -25,8 +25,8 @@
 
 void __init ixdpg425_pci_preinit(void)
 {
-        set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
-        set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
+        set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
index b8ebaf4a9c8e..1088426fdcee 100644
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -24,11 +24,11 @@
 
 void __init nas100d_pci_preinit(void)
 {
-        set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW);
-        set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW);
-        set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW);
-        set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW);
-        set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW);
+        set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index 04661fef97f5..4429b8448b61 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -24,9 +24,9 @@
 
 void __init nslu2_pci_preinit(void)
 {
-        set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-        set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-        set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
+        set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index 6588f2c758e2..0f00feab67f8 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -29,8 +29,8 @@
 
 void __init wg302v2_pci_preinit(void)
 {
-        set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-        set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+        set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
 
         ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index 4c3ab43e1046..0b06941a1eed 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type)
         ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
 
         switch (type) {
-                case IRQT_HIGH:
+                case IRQ_TYPE_LEVEL_HIGH:
                         mode = IOPC_TM_HIGH;
                         level_triggered = 1;
                         break;
-                case IRQT_LOW:
+                case IRQ_TYPE_LEVEL_LOW:
                         mode = IOPC_TM_LOW;
                         level_triggered = 1;
                         break;
-                case IRQT_RISING:
+                case IRQ_TYPE_EDGE_RISING:
                         mode = IOPC_TM_RISING;
                         break;
-                case IRQT_FALLING:
+                case IRQ_TYPE_EDGE_FALLING:
                         mode = IOPC_TM_FALLING;
                         break;
-                case IRQT_BOTHEDGE:
+                case IRQ_TYPE_EDGE_BOTH:
                         mode = IOPC_TM_EDGE;
                         break;
                 default:
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index fd7537f7d11e..99d4fb19a08a 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type)
 
         irq = _irq - NETX_IRQ_HIF_CHAINED(0);
 
-        if (type & __IRQT_RISEDGE) {
+        if (type & IRQ_TYPE_EDGE_RISING) {
                 DEBUG_IRQ("rising edges\n");
                 val |= (1 << 26) << irq;
         }
-        if (type & __IRQT_FALEDGE) {
+        if (type & IRQ_TYPE_EDGE_FALLING) {
                 DEBUG_IRQ("falling edges\n");
                 val &= ~((1 << 26) << irq);
         }
-        if (type & __IRQT_LOWLVL) {
+        if (type & IRQ_TYPE_LEVEL_LOW) {
                 DEBUG_IRQ("low level\n");
                 val &= ~((1 << 26) << irq);
         }
-        if (type & __IRQT_HIGHLVL) {
+        if (type & IRQ_TYPE_LEVEL_HIGH) {
                 DEBUG_IRQ("high level\n");
                 val |= (1 << 26) << irq;
         }
diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c
index f8639161068f..44ed20d4a388 100644
--- a/arch/arm/mach-ns9xxx/clock.c
+++ b/arch/arm/mach-ns9xxx/clock.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/semaphore.h>
 
-#include <asm/semaphore.h>
 #include "clock.h"
 
 static LIST_HEAD(clocks);
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 845c66371ca3..41f94f6fc15c 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -288,7 +288,7 @@ static void __init osk_init_cf(void)
                 return;
         }
         /* the CF I/O IRQ is really active-low */
-        set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING);
+        set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void __init osk_init_irq(void)
@@ -483,7 +483,7 @@ static void __init osk_mistral_init(void)
         omap_cfg_reg(P20_1610_GPIO4);   /* PENIRQ */
         gpio_request(4, "ts_int");
         gpio_direction_input(4);
-        set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+        set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING);
 
         spi_register_board_info(mistral_boardinfo,
                         ARRAY_SIZE(mistral_boardinfo));
@@ -494,7 +494,7 @@ static void __init osk_mistral_init(void)
                 int ret = 0;
 
                 gpio_direction_input(OMAP_MPUIO(2));
-                set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
+                set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING);
 #ifdef  CONFIG_PM
                 /* share the IRQ in case someone wants to use the
                  * button for more than wakeup from system sleep.
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e020c2774606..34389b63b0ec 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id)
         if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
                 printk(KERN_INFO "PM: Power cable connected\n");
                 set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-                                IRQT_FALLING);
+                                IRQ_TYPE_EDGE_FALLING);
         } else {
                 printk(KERN_INFO "PM: Power cable disconnected\n");
                 set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-                                IRQT_RISING);
+                                IRQ_TYPE_EDGE_RISING);
         }
         return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 5c00b3f39cdd..8948d45a2769 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -186,10 +186,10 @@ static void __init voiceblue_init(void)
         omap_request_gpio(13);
         omap_request_gpio(14);
         omap_request_gpio(15);
-        set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
-        set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
-        set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
-        set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING);
 
         platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
         omap_board_config = voiceblue_config;
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0cf62ef5ecb7..d963125ed755 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void)
          */
         omap_request_gpio(13);
         omap_set_gpio_direction(13, 1);
-        set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
         set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 620fa0f120ee..870b34972d3b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -337,17 +337,17 @@ static void __init apollon_sw_init(void)
         omap_request_gpio(SW_DOWN_GPIO58);
         omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
 
-        set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
         if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
                                 IRQF_SHARED, "enter sw",
                                 &apollon_sw_interrupt))
                 return;
-        set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
         if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
                                 IRQF_SHARED, "up sw",
                                 &apollon_sw_interrupt))
                 return;
-        set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
         if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
                                 IRQF_SHARED, "down sw",
                                 &apollon_sw_interrupt))
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 88405e74e5e3..40a0bee4fbb3 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void)
         pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
         if (gpio_request(pin, "PCI Int1") == 0) {
                 if (gpio_direction_input(pin) == 0) {
-                        set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+                        set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
                 } else {
                         printk(KERN_ERR "db88f5281_pci_preinit faield to "
                                         "set_irq_type pin %d\n", pin);
@@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void)
         pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
         if (gpio_request(pin, "PCI Int2") == 0) {
                 if (gpio_direction_input(pin) == 0) {
-                        set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+                        set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
                 } else {
                         printk(KERN_ERR "db88f5281_pci_preinit faield "
                                         "to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index e2a0084ab4a3..9ae3f6dc7839 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
         desc = irq_desc + irq;
 
         switch (type) {
-        case IRQT_HIGH:
+        case IRQ_TYPE_LEVEL_HIGH:
                 desc->handle_irq = handle_level_irq;
                 desc->status |= IRQ_LEVEL;
                 orion5x_clrbits(GPIO_IN_POL, (1 << pin));
                 break;
-        case IRQT_LOW:
+        case IRQ_TYPE_LEVEL_LOW:
                 desc->handle_irq = handle_level_irq;
                 desc->status |= IRQ_LEVEL;
                 orion5x_setbits(GPIO_IN_POL, (1 << pin));
                 break;
-        case IRQT_RISING:
+        case IRQ_TYPE_EDGE_RISING:
                 desc->handle_irq = handle_edge_irq;
                 desc->status &= ~IRQ_LEVEL;
                 orion5x_clrbits(GPIO_IN_POL, (1 << pin));
                 break;
-        case IRQT_FALLING:
+        case IRQ_TYPE_EDGE_FALLING:
                 desc->handle_irq = handle_edge_irq;
                 desc->status &= ~IRQ_LEVEL;
                 orion5x_setbits(GPIO_IN_POL, (1 << pin));
                 break;
-        case IRQT_BOTHEDGE:
+        case IRQ_TYPE_EDGE_BOTH:
                 desc->handle_irq = handle_edge_irq;
                 desc->status &= ~IRQ_LEVEL;
                 /*
@@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
                 if (cause & (1 << pin)) {
                         irq = gpio_to_irq(pin);
                         desc = irq_desc + irq;
-                        if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+                        if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
                                 /* Swap polarity (race with GPIO line) */
                                 u32 polarity = readl(GPIO_IN_POL);
                                 polarity ^= 1 << pin;
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 10ae62864269..2a46d27209c1 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void)
         pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
         if (gpio_request(pin, "PCI IntA") == 0) {
                 if (gpio_direction_input(pin) == 0) {
-                        set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+                        set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
                 } else {
                         printk(KERN_ERR "rd88f5182_pci_preinit faield to "
                                         "set_irq_type pin %d\n", pin);
@@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void)
         pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
         if (gpio_request(pin, "PCI IntB") == 0) {
                 if (gpio_direction_input(pin) == 0) {
-                        set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+                        set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
                 } else {
                         printk(KERN_ERR "rd88f5182_pci_preinit faield to "
                                         "set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index a9cef9703d5b..f270ada2def9 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void)
         pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
         if (gpio_request(pin, "PCI Int1") == 0) {
                 if (gpio_direction_input(pin) == 0) {
-                        set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+                        set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
                 } else {
                         printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
                                         "set_irq_type pin %d\n", pin);
@@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void)
         pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
         if (gpio_request(pin, "PCI Int2") == 0) {
                 if (gpio_direction_input(pin) == 0) {
-                        set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+                        set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
                 } else {
                         printk(KERN_ERR "qnap_ts209_pci_preinit failed "
                                         "to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 968d0b027597..5ed67e1947a8 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -56,28 +56,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq)
 static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
 {
         switch (type) {
-        case IRQT_RISING:
+        case IRQ_TYPE_EDGE_RISING:
                 __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));        /*edge sensitive */
                 __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));        /*rising edge */
                 set_irq_handler(irq, handle_edge_irq);
                 break;
-        case IRQT_FALLING:
+        case IRQ_TYPE_EDGE_FALLING:
                 __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));        /*edge sensitive */
                 __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));       /*falling edge */
                 set_irq_handler(irq, handle_edge_irq);
                 break;
-        case IRQT_LOW:
+        case IRQ_TYPE_LEVEL_LOW:
                 __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));       /*level sensitive */
                 __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));       /*low level */
                 set_irq_handler(irq, handle_level_irq);
                 break;
-        case IRQT_HIGH:
+        case IRQ_TYPE_LEVEL_HIGH:
                 __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));       /*level sensitive */
                 __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));        /* high level */
                 set_irq_handler(irq, handle_level_irq);
                 break;
 
-        /* IRQT_BOTHEDGE is not supported */
+        /* IRQ_TYPE_EDGE_BOTH is not supported */
         default:
                 printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
                 return -1;
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 914bb33dab92..e8ee7ec9ff6d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,18 +16,24 @@ config CPU_PXA310
 config CPU_PXA320
         bool "PXA320 (codename Monahans-P)"
 
+config CPU_PXA930
+        bool "PXA930 (codename Tavor-P)"
+
 endmenu
 
 endif
 
-menu "Select target boards"
-
 config ARCH_GUMSTIX
         bool "Gumstix XScale boards"
         help
           Say Y here if you intend to run this kernel on a
           Gumstix Full Function Minature Computer.
 
+config MACH_GUMSTIX_F
+        bool "Basix, Connex, ws-200ax, ws-400ax systems"
+        depends on ARCH_GUMSTIX
+        select PXA25x
+
 config ARCH_LUBBOCK
         bool "Intel DBPXA250 Development Platform"
         select PXA25x
@@ -58,6 +64,57 @@ config PXA_SHARPSL
           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
           handheld computer.
 
+config MACH_POODLE
+        bool "Enable Sharp SL-5600 (Poodle) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select SHARP_LOCOMO
+        select PXA_SSP
+
+config MACH_CORGI
+        bool "Enable Sharp SL-C700 (Corgi) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+        bool "Enable Sharp SL-C750 (Shepherd) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+        bool "Enable Sharp SL-C760 (Husky) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
+
+config MACH_AKITA
+        bool "Enable Sharp SL-1000 (Akita) Support"
+        depends on PXA_SHARPSL
+        select PXA27x
+        select PXA_SHARP_Cxx00
+        select MACH_SPITZ
+        select I2C
+        select I2C_PXA
+
+config MACH_SPITZ
+        bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+        depends on PXA_SHARPSL
+        select PXA27x
+        select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+        bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+        depends on PXA_SHARPSL
+        select PXA27x
+        select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+        bool "Enable Sharp SL-6000x (Tosa) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+
 config ARCH_PXA_ESERIES
         bool "PXA based Toshiba e-series PDAs"
         select PXA25x
@@ -70,10 +127,19 @@ config MACH_E330
           Say Y here if you intend to run this kernel on a Toshiba
           e330 family PDA.
 
+config MACH_E350
+        bool "Toshiba e350"
+        default y
+        depends on ARCH_PXA_ESERIES
+        help
+          Say Y here if you intend to run this kernel on a Toshiba
+          e350 family PDA.
+
 config MACH_E740
         bool "Toshiba e740"
         default y
         depends on ARCH_PXA_ESERIES
+        select FB_W100
         help
           Say Y here if you intend to run this kernel on a Toshiba
           e740 family PDA.
@@ -82,6 +148,7 @@ config MACH_E750
         bool "Toshiba e750"
         default y
         depends on ARCH_PXA_ESERIES
+        select FB_W100
         help
           Say Y here if you intend to run this kernel on a Toshiba
           e750 family PDA.
@@ -98,6 +165,7 @@ config MACH_E800
         bool "Toshiba e800"
         default y
         depends on ARCH_PXA_ESERIES
+        select FB_W100
         help
           Say Y here if you intend to run this kernel on a Toshiba
           e800 family PDA.
@@ -106,6 +174,10 @@ config MACH_TRIZEPS4
         bool "Keith und Koep Trizeps4 DIMM-Module"
         select PXA27x
 
+config MACH_TRIZEPS4_CONXS
+        bool "ConXS Eval Board"
+        depends on MACH_TRIZEPS4
+
 config MACH_EM_X270
         bool "CompuLab EM-x270 platform"
         select PXA27x
@@ -115,7 +187,7 @@ config MACH_COLIBRI
         select PXA27x
 
 config MACH_ZYLONITE
-        bool "PXA3xx Development Platform"
+        bool "PXA3xx Development Platform (aka Zylonite)"
         select PXA3xx
         select HAVE_PWM
 
@@ -124,6 +196,16 @@ config MACH_LITTLETON
         select PXA3xx
         select PXA_SSP
 
+config MACH_TAVOREVB
+        bool "PXA930 Evaluation Board (aka TavorEVB)"
+        select PXA3xx
+        select PXA930
+
+config MACH_SAAR
+        bool "PXA930 Handheld Platform (aka SAAR)"
+        select PXA3xx
+        select PXA930
+
 config MACH_ARMCORE
         bool "CompuLab CM-X270 modules"
         select PXA27x
@@ -131,7 +213,6 @@ config MACH_ARMCORE
 
 config MACH_MAGICIAN
         bool "Enable HTC Magician Support"
-        depends on ARCH_PXA
         select PXA27x
         select IWMMXT
 
@@ -139,18 +220,26 @@ config MACH_PCM027
         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
         select PXA27x
         select IWMMXT
+        select PXA_SSP
 
-endmenu
+config ARCH_PXA_PALM
+        bool "PXA based Palm PDAs"
+        select HAVE_PWM
 
-choice
-        prompt "Used baseboard"
-        depends on MACH_PCM027
+config MACH_PALMTX
+        bool "Palm T|X"
+        default y
+        depends on ARCH_PXA_PALM
+        select PXA27x
+        select IWMMXT
+        help
+          Say Y here if you intend to run this kernel on a Palm T|X
+          handheld computer.
 
 config MACH_PCM990_BASEBOARD
         bool "PHYTEC PCM-990 development board"
         select HAVE_PWM
-
-endchoice
+        depends on MACH_PCM027
 
 choice
         prompt "display on pcm990"
@@ -167,88 +256,45 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
-if ARCH_GUMSTIX
-
-choice
-        prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
-        bool "Basix, Connex, ws-200ax, ws-400ax systems"
-        select PXA25x
-
-endchoice
-
-endif
 
+config PXA_EZX
+        bool "Motorola EZX Platform"
+        select PXA27x
+        select IWMMXT
+        select HAVE_PWM
 
-if MACH_TRIZEPS4
+config MACH_EZX_A780
+        bool "Motorola EZX A780"
+        default y
+        depends on PXA_EZX
 
-choice
-        prompt "Select base board for Trizeps 4 module"
+config MACH_EZX_E680
+        bool "Motorola EZX E680"
+        default y
+        depends on PXA_EZX
 
-config MACH_TRIZEPS4_CONXS
-        bool "ConXS Eval Board"
+config MACH_EZX_A1200
+        bool "Motorola EZX A1200"
+        default y
+        depends on PXA_EZX
 
-config MACH_TRIZEPS4_ANY
-        bool "another Board"
+config MACH_EZX_A910
+        bool "Motorola EZX A910"
+        default y
+        depends on PXA_EZX
 
-endchoice
+config MACH_EZX_E6
+        bool "Motorola EZX E6"
+        default y
+        depends on PXA_EZX
 
-endif
+config MACH_EZX_E2
+        bool "Motorola EZX E2"
+        default y
+        depends on PXA_EZX
 
 endmenu
 
-config MACH_POODLE
-        bool "Enable Sharp SL-5600 (Poodle) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select SHARP_LOCOMO
-        select PXA_SSP
-
-config MACH_CORGI
-        bool "Enable Sharp SL-C700 (Corgi) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-        bool "Enable Sharp SL-C750 (Shepherd) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-        bool "Enable Sharp SL-C760 (Husky) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select PXA_SHARP_C7xx
-
-config MACH_AKITA
-        bool "Enable Sharp SL-1000 (Akita) Support"
-        depends on PXA_SHARPSL
-        select PXA27x
-        select PXA_SHARP_Cxx00
-        select MACH_SPITZ
-        select I2C
-        select I2C_PXA
-
-config MACH_SPITZ
-        bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-        depends on PXA_SHARPSL
-        select PXA27x
-        select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-        bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-        depends on PXA_SHARPSL
-        select PXA27x
-        select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-        bool "Enable Sharp SL-6000x (Tosa) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-
 config PXA25x
         bool
         help
@@ -288,4 +334,13 @@ config PXA_PWM
         default BACKLIGHT_PWM
         help
           Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+        tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+        depends on MACH_TOSA
+        select RFKILL
+        help
+          This is a simple driver that is able to control
+          the state of built in bluetooth chip on tosa.
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c4dfbe87fc4e..99ecbe7f8506 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y                           += clock.o devices.o generic.o irq.o dma.o \
-                                   time.o gpio.o
+                                   time.o gpio.o reset.o
 obj-$(CONFIG_PM)                += pm.o sleep.o standby.o
 obj-$(CONFIG_CPU_FREQ)          += cpu-pxa.o
 
@@ -18,6 +18,7 @@ obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)            += mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)        += pxa300.o
 obj-$(CONFIG_CPU_PXA320)        += pxa320.o
+obj-$(CONFIG_CPU_PXA930)        += pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)      += gumstix.o
@@ -36,7 +37,12 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)         += tosa.o
 obj-$(CONFIG_MACH_EM_X270)      += em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)     += magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)  += eseries.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)  += eseries.o eseries_udc.o
+obj-$(CONFIG_MACH_E740)         += e740_lcd.o
+obj-$(CONFIG_MACH_E750)         += e750_lcd.o
+obj-$(CONFIG_MACH_E400)         += e400_lcd.o
+obj-$(CONFIG_MACH_E800)         += e800_lcd.o
+obj-$(CONFIG_MACH_PALMTX)       += palmtx.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y                         += zylonite.o
@@ -44,8 +50,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)      += zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)    += littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)     += tavorevb.o
+obj-$(CONFIG_MACH_SAAR)         += saar.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -59,3 +68,5 @@ obj-$(CONFIG_LEDS)		+= $(led-y)
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
+
+obj-$(CONFIG_TOSA_BT)           += tosa-bt.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index b4d04955dcb0..630063ffa6fc 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
 EXPORT_SYMBOL(clk_get_rate);
 
 
-static void clk_gpio27_enable(struct clk *clk)
-{
-        pxa_gpio_mode(GPIO11_3_6MHz_MD);
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_gpio27_ops = {
-        .enable         = clk_gpio27_enable,
-        .disable        = clk_gpio27_disable,
-};
-
-
 void clk_cken_enable(struct clk *clk)
 {
         CKEN |= 1 << clk->cken;
@@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = {
         .disable        = clk_cken_disable,
 };
 
-static struct clk common_clks[] = {
-        {
-                .name           = "GPIO27_CLK",
-                .ops            = &clk_gpio27_ops,
-                .rate           = 3686400,
-        },
-};
-
 void clks_register(struct clk *clks, size_t num)
 {
         int i;
@@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
                 list_add(&clks[i].node, &clocks);
         mutex_unlock(&clocks_mutex);
 }
-
-static int __init clk_init(void)
-{
-        clks_register(common_clks, ARRAY_SIZE(common_clks));
-        return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 83cbfaba485d..1ec8f9178aaf 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -47,9 +47,42 @@ struct clk {
                 .other  = _other,                       \
         }
 
+#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
+        {                                               \
+                .name   = _name,                        \
+                .dev    = _dev,                         \
+                .ops    = _ops,                         \
+                .rate   = _rate,                        \
+                .delay  = _delay,                       \
+        }
+
 extern const struct clkops clk_cken_ops;
 
 void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
+#ifdef CONFIG_PXA3xx
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)  \
+        {                                               \
+                .name   = _name,                        \
+                .dev    = _dev,                         \
+                .ops    = &clk_pxa3xx_cken_ops,         \
+                .rate   = _rate,                        \
+                .cken   = CKEN_##_cken,                 \
+                .delay  = _delay,                       \
+        }
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)             \
+        {                                               \
+                .name   = _name,                        \
+                .dev    = _dev,                         \
+                .ops    = _ops,                         \
+                .cken   = CKEN_##_cken,                 \
+        }
+
+extern const struct clkops clk_pxa3xx_cken_ops;
+extern void clk_pxa3xx_cken_enable(struct clk *);
+extern void clk_pxa3xx_cken_disable(struct clk *);
+#endif
+
 void clks_register(struct clk *clks, size_t num);
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 319c9ff3ab9a..31f5bd411ced 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -5,7 +5,7 @@
  *
  * Bits taken from various places.
  *
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
 
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx270_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
         unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
         if (machine_is_armcore()) {
-                pr_info("Adjusting zones for CM-x270\n");
+                pr_info("Adjusting zones for CM-X270\n");
 
                 /*
                  * Only adjust if > 64M on current system
@@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
         /* clear our parent irq */
-        GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+        GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
 
         it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(void)
+void __cmx270_pci_init_irq(int irq_gpio)
 {
         it8152_init_irq();
-        pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
-        set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
 
-        set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
-                                cmx270_it8152_irq_demux);
+        cmx270_it8152_irq_gpio = irq_gpio;
+
+        set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
+
+        set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
@@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
         /*
           Here comes the ugly part. The routing is baseboard specific,
-          but defining a platform for each possible base of CM-x270 is
-          unrealistic. Here we keep mapping for ATXBase and SB-x270.
+          but defining a platform for each possible base of CM-X270 is
+          unrealistic. Here we keep mapping for ATXBase and SB-X270.
         */
         /* ATXBASE PCI slot */
         if (slot == 7)
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
index ffe37b66f9a0..48f532f4cb51 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ b/arch/arm/mach-pxa/cm-x270-pci.h
@@ -1,13 +1,13 @@
-extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_init_irq(int irq_gpio);
 extern void __cmx270_pci_suspend(void);
 extern void __cmx270_pci_resume(void);
 
 #ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
+#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
+#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
+#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
 #else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
+#define cmx270_pci_init_irq(x) do {} while (0)
+#define cmx270_pci_suspend(x) do {} while (0)
+#define cmx270_pci_resume(x) do {} while (0)
 #endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 01b9964acec1..402e807eae54 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-pxa/cm-x270.c
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,44 +9,156 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
 #include <linux/platform_device.h>
-#include <linux/irq.h>
 #include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
 #include <video/mbxfb.h>
+#include <linux/leds.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
 
 #include <asm/hardware/it8152.h>
 
 #include "generic.h"
 #include "cm-x270-pci.h"
 
+/* virtual addresses for statically mapped regions */
+#define CMX270_VIRT_BASE        (0xe8000000)
+#define CMX270_IT8152_VIRT      (CMX270_VIRT_BASE)
+
 #define RTC_PHYS_BASE           (PXA_CS1_PHYS + (5 << 22))
 #define DM9000_PHYS_BASE        (PXA_CS1_PHYS + (6 << 22))
 
-static struct resource cmx270_dm9k_resource[] = {
+/* GPIO IRQ usage */
+#define GPIO10_ETHIRQ           (10)
+#define GPIO22_IT8152_IRQ       (22)
+#define GPIO83_MMC_IRQ          (83)
+#define GPIO95_GFXIRQ           (95)
+
+#define CMX270_ETHIRQ           IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_IT8152_IRQ       IRQ_GPIO(GPIO22_IT8152_IRQ)
+#define CMX270_MMC_IRQ          IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_GFXIRQ           IRQ_GPIO(GPIO95_GFXIRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER       (105)
+
+static unsigned long cmx270_pin_config[] = {
+        /* AC'97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+        GPIO98_AC97_SYSCLK,
+        GPIO113_AC97_nRESET,
+
+        /* BTUART */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* STUART */
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+
+        /* MCI controller */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+
+        /* LCD */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+
+        /* I2C */
+        GPIO117_I2C_SCL,
+        GPIO118_I2C_SDA,
+
+        /* SSP1 */
+        GPIO23_SSP1_SCLK,
+        GPIO24_SSP1_SFRM,
+        GPIO25_SSP1_TXD,
+        GPIO26_SSP1_RXD,
+
+        /* SSP2 */
+        GPIO19_SSP2_SCLK,
+        GPIO14_SSP2_SFRM,
+        GPIO87_SSP2_TXD,
+        GPIO88_SSP2_RXD,
+
+        /* PC Card */
+        GPIO48_nPOE,
+        GPIO49_nPWE,
+        GPIO50_nPIOR,
+        GPIO51_nPIOW,
+        GPIO85_nPCE_1,
+        GPIO54_nPCE_2,
+        GPIO55_nPREG,
+        GPIO56_nPWAIT,
+        GPIO57_nIOIS16,
+
+        /* SDRAM and local bus */
+        GPIO15_nCS_1,
+        GPIO78_nCS_2,
+        GPIO79_nCS_3,
+        GPIO80_nCS_4,
+        GPIO33_nCS_5,
+        GPIO49_nPWE,
+        GPIO18_RDY,
+
+        /* GPIO */
+        GPIO0_GPIO      | WAKEUP_ON_EDGE_BOTH,
+        GPIO105_GPIO    | MFP_LPM_DRIVE_HIGH,   /* MMC/SD power */
+        GPIO53_GPIO,                            /* PC card reset */
+
+        /* NAND controls */
+        GPIO11_GPIO     | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
+        GPIO89_GPIO,                            /* NAND Ready/Busy */
+
+        /* interrupts */
+        GPIO10_GPIO,    /* DM9000 interrupt */
+        GPIO83_GPIO,    /* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx270_dm9000_resource[] = {
         [0] = {
                 .start = DM9000_PHYS_BASE,
                 .end   = DM9000_PHYS_BASE + 4,
@@ -64,31 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
         }
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
         .flags          = DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
+static struct platform_device cmx270_dm9000_device = {
         .name           = "dm9000",
         .id             = 0,
-        .num_resources  = ARRAY_SIZE(cmx270_dm9k_resource),
-        .resource       = cmx270_dm9k_resource,
+        .num_resources  = ARRAY_SIZE(cmx270_dm9000_resource),
+        .resource       = cmx270_dm9000_resource,
         .dev            = {
-                .platform_data = &cmx270_dm9k_platdata,
+                .platform_data = &cmx270_dm9000_platdata,
         }
 };
 
-/* touchscreen controller */
+static void __init cmx270_init_dm9000(void)
+{
+        platform_device_register(&cmx270_dm9000_device);
+}
+#else
+static inline void cmx270_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 static struct platform_device cmx270_ts_device = {
         .name           = "ucb1400_ts",
         .id             = -1,
 };
 
-/* RTC */
+static void __init cmx270_init_touchscreen(void)
+{
+        platform_device_register(&cmx270_ts_device);
+}
+#else
+static inline void cmx270_init_touchscreen(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
         [0] = {
                 .start = RTC_PHYS_BASE,
@@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
         }
 };
 
-/*
- * CM-X270 LEDs
- */
+static void __init cmx270_init_rtc(void)
+{
+        platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx270_leds[] = {
+        [0] = {
+                .name = "cm-x270:red",
+                .default_trigger = "nand-disk",
+                .gpio = 93,
+                .active_low = 1,
+        },
+        [1] = {
+                .name = "cm-x270:green",
+                .default_trigger = "heartbeat",
+                .gpio = 94,
+                .active_low = 1,
+        },
+};
+
+static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
+        .num_leds = ARRAY_SIZE(cmx270_leds),
+        .leds = cmx270_leds,
+};
+
 static struct platform_device cmx270_led_device = {
-        .name           = "cm-x270-led",
+        .name           = "leds-gpio",
         .id             = -1,
+        .dev            = {
+                .platform_data = &cmx270_gpio_led_pdata,
+        },
 };
 
+static void __init cmx270_init_leds(void)
+{
+        platform_device_register(&cmx270_led_device);
+}
+#else
+static inline void cmx270_init_leds(void) {}
+#endif
+
 /* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
 
 static struct resource cmx270_2700G_resource[] = {
         /* frame buffer memory including ODFB and External SDRAM */
         [0] = {
-                .start = MARATHON_PHYS,
-                .end   = MARATHON_PHYS + 0x02000000,
+                .start = PXA_CS2_PHYS,
+                .end   = PXA_CS2_PHYS + 0x01ffffff,
                 .flags = IORESOURCE_MEM,
         },
         /* Marathon registers */
         [1] = {
-                .start = MARATHON_PHYS + 0x03fe0000,
-                .end   = MARATHON_PHYS + 0x03ffffff,
+                .start = PXA_CS2_PHYS + 0x03fe0000,
+                .end   = PXA_CS2_PHYS + 0x03ffffff,
                 .flags = IORESOURCE_MEM,
         },
 };
@@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
         .id             = -1,
 };
 
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
-        .name = "pata_cm_x270",
-        .id = -1,
-        .dev            = {
-                .dma_mask       = &ata_dma_mask,
-                .coherent_dma_mask = 0xffffffff,
-        },
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-        &cmx270_device_dm9k,
-        &cmx270_rtc_device,
-        &cmx270_2700G,
-        &cmx270_led_device,
-        &cmx270_ts_device,
-        &cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-        [0] = { /* IDE/general purpose space */
-                .virtual        = CMX270_IDE104_VIRT,
-                .pfn            = __phys_to_pfn(CMX270_IDE104_PHYS),
-                .length         = SZ_64M - SZ_8M,
-                .type           = MT_DEVICE
-        },
-        [1] = { /* PCI bridge */
-                .virtual        = CMX270_IT8152_VIRT,
-                .pfn            = __phys_to_pfn(CMX270_IT8152_PHYS),
-                .length         = SZ_64M,
-                .type           = MT_DEVICE
-        },
-};
+static void __init cmx270_init_2700G(void)
+{
+        platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /*
   Display definitions
   keep these for backwards compatibility, although symbolic names (as
@@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
 */
 __setup("monitor=", cmx270_set_display);
 
+static void __init cmx270_init_display(void)
+{
+        set_pxa_fb_info(cmx270_display);
+}
+#else
+static inline void cmx270_init_display(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cmx270_ohci_init(struct device *dev)
 {
         /* Set the Power Control Polarity Low */
@@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
         .init           = cmx270_ohci_init,
 };
 
+static void __init cmx270_init_ohci(void)
+{
+        pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
 
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int cmx270_mci_init(struct device *dev,
                            irq_handler_t cmx270_detect_int,
                            void *data)
 {
         int err;
 
-        /*
-         * setup GPIO for PXA27x MMC controller
-         */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-        /* SB-X270 uses GPIO105 as SD power enable */
-        pxa_gpio_mode(105 | GPIO_OUT);
+        err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+        if (err) {
+                dev_warn(dev, "power gpio unavailable\n");
+                return err;
+        }
 
-        /* card detect IRQ on GPIO 83 */
-        pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+        gpio_direction_output(GPIO105_MMC_POWER, 0);
 
         err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
                           IRQF_DISABLED | IRQF_TRIGGER_FALLING,
                           "MMC card detect", data);
-        if (err)
-                printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
-                       " request MMC card detect IRQ\n");
+        if (err) {
+                gpio_free(GPIO105_MMC_POWER);
+                dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+                        " request MMC card detect IRQ\n");
+        }
 
         return err;
 }
@@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
         struct pxamci_platform_data *p_d = dev->platform_data;
 
         if ((1 << vdd) & p_d->ocr_mask) {
-                printk(KERN_DEBUG "%s: on\n", __func__);
-                GPCR(105) = GPIO_bit(105);
+                dev_dbg(dev, "power on\n");
+                gpio_set_value(GPIO105_MMC_POWER, 0);
         } else {
-                GPSR(105) = GPIO_bit(105);
-                printk(KERN_DEBUG "%s: off\n", __func__);
+                gpio_set_value(GPIO105_MMC_POWER, 1);
+                dev_dbg(dev, "power off\n");
         }
 }
 
 static void cmx270_mci_exit(struct device *dev, void *data)
 {
         free_irq(CMX270_MMC_IRQ, data);
+        gpio_free(GPIO105_MMC_POWER);
 }
 
 static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
         .exit           = cmx270_mci_exit,
 };
 
+static void __init cmx270_init_mmc(void)
+{
+        pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
 #ifdef CONFIG_PM
 static unsigned long sleep_save_msc[10];
 
@@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
 static int __init cmx270_pm_init(void) { return 0; }
 #endif
 
-static void __init cmx270_init(void)
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx270_init_ac97(void)
 {
-        cmx270_pm_init();
-
-        set_pxa_fb_info(cmx270_display);
-
-        /* register CM-X270 platform devices */
-        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
         pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx270_init_ac97(void) {}
+#endif
 
-        /* set MCI and OHCI platform parameters */
-        pxa_set_mci_info(&cmx270_mci_platform_data);
-        pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
-        /* This enables the STUART */
-        pxa_gpio_mode(GPIO46_STRXD_MD);
-        pxa_gpio_mode(GPIO47_STTXD_MD);
+static void __init cmx270_init(void)
+{
+        cmx270_pm_init();
 
-        /* This enables the BTUART  */
-        pxa_gpio_mode(GPIO42_BTRXD_MD);
-        pxa_gpio_mode(GPIO43_BTTXD_MD);
-        pxa_gpio_mode(GPIO44_BTCTS_MD);
-        pxa_gpio_mode(GPIO45_BTRTS_MD);
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+        cmx270_init_dm9000();
+        cmx270_init_rtc();
+        cmx270_init_display();
+        cmx270_init_mmc();
+        cmx270_init_ohci();
+        cmx270_init_ac97();
+        cmx270_init_touchscreen();
+        cmx270_init_leds();
+        cmx270_init_2700G();
 }
 
 static void __init cmx270_init_irq(void)
 {
         pxa27x_init_irq();
 
+        cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+}
 
-        cmx270_pci_init_irq();
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+        [0] = { /* PCI bridge */
+                .virtual        = CMX270_IT8152_VIRT,
+                .pfn            = __phys_to_pfn(PXA_CS4_PHYS),
+                .length         = SZ_64M,
+                .type           = MT_DEVICE
+        },
+};
 
-        /* Setup interrupt for dm9000 */
-        pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
-        set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+static void __init cmx270_map_io(void)
+{
+        pxa_map_io();
+        iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 
-        /* Setup interrupt for 2700G */
-        pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
-        set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+        it8152_base_address = CMX270_IT8152_VIRT;
 }
-
+#else
 static void __init cmx270_map_io(void)
 {
         pxa_map_io();
-        iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 }
-
+#endif
 
 MACHINE_START(ARMCORE, "Compulab CM-x270")
         .boot_params    = 0xa0000100,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b37671b71886..e58504edb140 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -465,6 +465,7 @@ static void corgi_irda_transceiver_mode(struct device *dev, int mode)
                 GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
         else
                 GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index a6f2390ce662..84489dc51d81 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -13,8 +13,10 @@
 #include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa2xx_spi.h>
 #include <asm/arch/camera.h>
 #include <asm/arch/audio.h>
+#include <asm/arch/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -830,4 +832,63 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
         pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_nand[] = {
+        [0] = {
+                .start  = 0x43100000,
+                .end    = 0x43100053,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_NAND,
+                .end    = IRQ_NAND,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                /* DRCMR for Data DMA */
+                .start  = 97,
+                .end    = 97,
+                .flags  = IORESOURCE_DMA,
+        },
+        [3] = {
+                /* DRCMR for Command DMA */
+                .start  = 99,
+                .end    = 99,
+                .flags  = IORESOURCE_DMA,
+        },
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+        .name           = "pxa3xx-nand",
+        .id             = -1,
+        .dev            = {
+                .dma_mask = &pxa3xx_nand_dma_mask,
+                .coherent_dma_mask = DMA_BIT_MASK(32),
+        },
+        .num_resources  = ARRAY_SIZE(pxa3xx_resources_nand),
+        .resource       = pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+        pxa_register_device(&pxa3xx_device_nand, info);
+}
 #endif /* CONFIG_PXA3xx */
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+        struct platform_device *pd;
+
+        pd = platform_device_alloc("pxa2xx-spi", id);
+        if (pd == NULL) {
+                printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+                       id);
+                return;
+        }
+
+        pd->dev.platform_data = info;
+        platform_device_add(pd);
+}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index b852eb18daa5..887c738f5911 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -31,4 +31,6 @@ extern struct platform_device pxa25x_device_pwm1;
 extern struct platform_device pxa27x_device_pwm0;
 extern struct platform_device pxa27x_device_pwm1;
 
+extern struct platform_device pxa3xx_device_nand;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
new file mode 100644
index 000000000000..16c023630626
--- /dev/null
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -0,0 +1,56 @@
+/*
+ * e400_lcd.c
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+        .pixclock       = 140703,
+        .xres           = 240,
+        .yres           = 320,
+        .bpp            = 16,
+        .hsync_len      = 4,
+        .left_margin    = 28,
+        .right_margin   = 8,
+        .vsync_len      = 3,
+        .upper_margin   = 5,
+        .lower_margin   = 6,
+        .sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+        .modes          = &e400_pxafb_mode_info,
+        .num_modes      = 1,
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = 0,
+        .pxafb_backlight_power  = NULL,
+};
+
+static int __init e400_lcd_init(void)
+{
+        if (!machine_is_e400())
+                return -ENODEV;
+
+        set_pxa_fb_info(&e400_pxafb_mach_info);
+        return 0;
+}
+
+module_init(e400_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e400 lcd driver");
+MODULE_LICENSE("GPLv2");
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
new file mode 100644
index 000000000000..26bd599af178
--- /dev/null
+++ b/arch/arm/mach-pxa/e740_lcd.c
@@ -0,0 +1,123 @@
+/* e740_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+/*
+**potential** shutdown routine - to be investigated
+devmem2 0x0c010528 w 0xff3fff00
+devmem2 0x0c010190 w 0x7FFF8000
+devmem2 0x0c0101b0 w 0x00FF0000
+devmem2 0x0c01008c w 0x00000000
+devmem2 0x0c010080 w 0x000000bf
+devmem2 0x0c010098 w 0x00000015
+devmem2 0x0c010088 w 0x4b000204
+devmem2 0x0c010098 w 0x0000001d
+*/
+
+static struct w100_gen_regs e740_lcd_regs = {
+        .lcd_format =            0x00008023,
+        .lcdd_cntl1 =            0x0f000000,
+        .lcdd_cntl2 =            0x0003ffff,
+        .genlcd_cntl1 =          0x00ffff03,
+        .genlcd_cntl2 =          0x003c0f03,
+        .genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+        .xres            = 240,
+        .yres            = 320,
+        .left_margin     = 20,
+        .right_margin    = 28,
+        .upper_margin    = 9,
+        .lower_margin    = 8,
+        .crtc_ss         = 0x80140013,
+        .crtc_ls         = 0x81150110,
+        .crtc_gs         = 0x80050005,
+        .crtc_vpos_gs    = 0x000a0009,
+        .crtc_rev        = 0x0040010a,
+        .crtc_dclk       = 0xa906000a,
+        .crtc_gclk       = 0x80050108,
+        .crtc_goe        = 0x80050108,
+        .pll_freq        = 57,
+        .pixclk_divider         = 4,
+        .pixclk_divider_rotated = 4,
+        .pixclk_src     = CLK_SRC_XTAL,
+        .sysclk_divider  = 1,
+        .sysclk_src     = CLK_SRC_PLL,
+        .crtc_ps1_active =       0x41060010,
+};
+
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+        .init_data1 = 0x21002103,
+        .gpio_dir1  = 0xffffdeff,
+        .gpio_oe1   = 0x03c00643,
+        .init_data2 = 0x003f003f,
+        .gpio_dir2  = 0xffffffff,
+        .gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+        .modelist   = &e740_lcd_mode,
+        .num_modes  = 1,
+        .regs       = &e740_lcd_regs,
+        .gpio       = &e740_w100_gpio_info,
+        .xtal_freq = 14318000,
+        .xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+        [0] = {
+                .start          = 0x0c000000,
+                .end            = 0x0cffffff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e740_fb_device = {
+        .name           = "w100fb",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &e740_fb_info,
+        },
+        .num_resources  = ARRAY_SIZE(e740_fb_resources),
+        .resource       = e740_fb_resources,
+};
+
+static int e740_lcd_init(void)
+{
+        int ret;
+
+        if (!machine_is_e740())
+                return -ENODEV;
+
+        return platform_device_register(&e740_fb_device);
+}
+
+module_init(e740_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e740 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750_lcd.c
new file mode 100644
index 000000000000..75edc3b5390f
--- /dev/null
+++ b/arch/arm/mach-pxa/e750_lcd.c
@@ -0,0 +1,109 @@
+/* e750_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e750_lcd_regs = {
+        .lcd_format =            0x00008003,
+        .lcdd_cntl1 =            0x00000000,
+        .lcdd_cntl2 =            0x0003ffff,
+        .genlcd_cntl1 =          0x00fff003,
+        .genlcd_cntl2 =          0x003c0f03,
+        .genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+        .xres            = 240,
+        .yres            = 320,
+        .left_margin     = 21,
+        .right_margin    = 22,
+        .upper_margin    = 5,
+        .lower_margin    = 4,
+        .crtc_ss         = 0x80150014,
+        .crtc_ls         = 0x8014000d,
+        .crtc_gs         = 0xc1000005,
+        .crtc_vpos_gs    = 0x00020147,
+        .crtc_rev        = 0x0040010a,
+        .crtc_dclk       = 0xa1700030,
+        .crtc_gclk       = 0x80cc0015,
+        .crtc_goe        = 0x80cc0015,
+        .crtc_ps1_active = 0x61060017,
+        .pll_freq        = 57,
+        .pixclk_divider         = 4,
+        .pixclk_divider_rotated = 4,
+        .pixclk_src     = CLK_SRC_XTAL,
+        .sysclk_divider  = 1,
+        .sysclk_src     = CLK_SRC_PLL,
+};
+
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+        .init_data1 = 0x01192f1b,
+        .gpio_dir1  = 0xd5ffdeff,
+        .gpio_oe1   = 0x000020bf,
+        .init_data2 = 0x010f010f,
+        .gpio_dir2  = 0xffffffff,
+        .gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+        .modelist   = &e750_lcd_mode,
+        .num_modes  = 1,
+        .regs       = &e750_lcd_regs,
+        .gpio       = &e750_w100_gpio_info,
+        .xtal_freq  = 14318000,
+        .xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+        [0] = {
+                .start          = 0x0c000000,
+                .end            = 0x0cffffff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e750_fb_device = {
+        .name           = "w100fb",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &e750_fb_info,
+        },
+        .num_resources  = ARRAY_SIZE(e750_fb_resources),
+        .resource       = e750_fb_resources,
+};
+
+static int e750_lcd_init(void)
+{
+        if (!machine_is_e750())
+                return -ENODEV;
+
+        return platform_device_register(&e750_fb_device);
+}
+
+module_init(e750_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e750 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800_lcd.c
new file mode 100644
index 000000000000..e6aeab0ebc22
--- /dev/null
+++ b/arch/arm/mach-pxa/e800_lcd.c
@@ -0,0 +1,159 @@
+/* e800_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e800_lcd_regs = {
+        .lcd_format =            0x00008003,
+        .lcdd_cntl1 =            0x02a00000,
+        .lcdd_cntl2 =            0x0003ffff,
+        .genlcd_cntl1 =          0x000ff2a3,
+        .genlcd_cntl2 =          0x000002a3,
+        .genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+        [0] = {
+                .xres            = 480,
+                .yres            = 640,
+                .left_margin     = 52,
+                .right_margin    = 148,
+                .upper_margin    = 2,
+                .lower_margin    = 6,
+                .crtc_ss         = 0x80350034,
+                .crtc_ls         = 0x802b0026,
+                .crtc_gs         = 0x80160016,
+                .crtc_vpos_gs    = 0x00020003,
+                .crtc_rev        = 0x0040001d,
+                .crtc_dclk       = 0xe0000000,
+                .crtc_gclk       = 0x82a50049,
+                .crtc_goe        = 0x80ee001c,
+                .crtc_ps1_active = 0x00000000,
+                .pll_freq        = 128,
+                .pixclk_divider         = 4,
+                .pixclk_divider_rotated = 6,
+                .pixclk_src     = CLK_SRC_PLL,
+                .sysclk_divider  = 0,
+                .sysclk_src     = CLK_SRC_PLL,
+        },
+        [1] = {
+                .xres            = 240,
+                .yres            = 320,
+                .left_margin     = 15,
+                .right_margin    = 88,
+                .upper_margin    = 0,
+                .lower_margin    = 7,
+                .crtc_ss         = 0xd010000f,
+                .crtc_ls         = 0x80070003,
+                .crtc_gs         = 0x80000000,
+                .crtc_vpos_gs    = 0x01460147,
+                .crtc_rev        = 0x00400003,
+                .crtc_dclk       = 0xa1700030,
+                .crtc_gclk       = 0x814b0008,
+                .crtc_goe        = 0x80cc0015,
+                .crtc_ps1_active = 0x00000000,
+                .pll_freq        = 100,
+                .pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
+                .pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+                .pixclk_src     = CLK_SRC_PLL,
+                .sysclk_divider  = 0,
+                .sysclk_src     = CLK_SRC_PLL,
+        }
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+        .init_data1 = 0xc13fc019,
+        .gpio_dir1  = 0x3e40df7f,
+        .gpio_oe1   = 0x003c3000,
+        .init_data2 = 0x00000000,
+        .gpio_dir2  = 0x00000000,
+        .gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+        .ext_cntl        = 0x09640011,
+        .sdram_mode_reg  = 0x00600021,
+        .ext_timing_cntl = 0x10001545,
+        .io_cntl         = 0x7ddd7333,
+        .size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+        unsigned long tmp;
+
+        tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+        if (par->mode->xres == 480)
+                tmp |= 0x100;
+        else
+                tmp &= ~0x100;
+        w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+        .change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+        .modelist   = e800_lcd_mode,
+        .num_modes  = 2,
+        .regs       = &e800_lcd_regs,
+        .gpio       = &e800_w100_gpio_info,
+        .mem        = &e800_w100_mem_info,
+        .tg         = &e800_tg_info,
+        .xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+        [0] = {
+                .start          = 0x0c000000,
+                .end            = 0x0cffffff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e800_fb_device = {
+        .name           = "w100fb",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &e800_fb_info,
+        },
+        .num_resources  = ARRAY_SIZE(e800_fb_resources),
+        .resource       = e800_fb_resources,
+};
+
+static int e800_lcd_init(void)
+{
+        if (!machine_is_e800())
+                return -ENODEV;
+
+        return platform_device_register(&e800_fb_device);
+}
+
+module_init(e800_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e800 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 1bf680749928..e5cc6ca63c75 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,31 +14,159 @@
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
 
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <asm/arch/pxa27x_keypad.h>
 
 #include "generic.h"
 
 /* GPIO IRQ usage */
-#define EM_X270_MMC_PD          (105)
-#define EM_X270_ETHIRQ          IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ         IRQ_GPIO(13)
+#define GPIO41_ETHIRQ           (41)
+#define GPIO13_MMC_CD           (13)
+#define EM_X270_ETHIRQ          IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD          IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS  (11)
+#define GPIO56_NAND_RB  (56)
+
+static unsigned long em_x270_pin_config[] = {
+        /* AC'97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+        GPIO98_AC97_SYSCLK,
+        GPIO113_AC97_nRESET,
+
+        /* BTUART */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* STUART */
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+
+        /* MCI controller */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+
+        /* LCD */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+
+        /* QCI */
+        GPIO84_CIF_FV,
+        GPIO25_CIF_LV,
+        GPIO53_CIF_MCLK,
+        GPIO54_CIF_PCLK,
+        GPIO81_CIF_DD_0,
+        GPIO55_CIF_DD_1,
+        GPIO51_CIF_DD_2,
+        GPIO50_CIF_DD_3,
+        GPIO52_CIF_DD_4,
+        GPIO48_CIF_DD_5,
+        GPIO17_CIF_DD_6,
+        GPIO12_CIF_DD_7,
+
+        /* I2C */
+        GPIO117_I2C_SCL,
+        GPIO118_I2C_SDA,
+
+        /* Keypad */
+        GPIO100_KP_MKIN_0       | WAKEUP_ON_LEVEL_HIGH,
+        GPIO101_KP_MKIN_1       | WAKEUP_ON_LEVEL_HIGH,
+        GPIO102_KP_MKIN_2       | WAKEUP_ON_LEVEL_HIGH,
+        GPIO34_KP_MKIN_3        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO39_KP_MKIN_4        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO99_KP_MKIN_5        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO91_KP_MKIN_6        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO36_KP_MKIN_7        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO103_KP_MKOUT_0,
+        GPIO104_KP_MKOUT_1,
+        GPIO105_KP_MKOUT_2,
+        GPIO106_KP_MKOUT_3,
+        GPIO107_KP_MKOUT_4,
+        GPIO108_KP_MKOUT_5,
+        GPIO96_KP_MKOUT_6,
+        GPIO22_KP_MKOUT_7,
+
+        /* SSP1 */
+        GPIO26_SSP1_RXD,
+        GPIO23_SSP1_SCLK,
+        GPIO24_SSP1_SFRM,
+        GPIO57_SSP1_TXD,
+
+        /* SSP2 */
+        GPIO19_SSP2_SCLK,
+        GPIO14_SSP2_SFRM,
+        GPIO89_SSP2_TXD,
+        GPIO88_SSP2_RXD,
+
+        /* SDRAM and local bus */
+        GPIO15_nCS_1,
+        GPIO78_nCS_2,
+        GPIO79_nCS_3,
+        GPIO80_nCS_4,
+        GPIO49_nPWE,
+        GPIO18_RDY,
+
+        /* GPIO */
+        GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+        /* power controls */
+        GPIO20_GPIO     | MFP_LPM_DRIVE_LOW,    /* GPRS_PWEN */
+        GPIO115_GPIO    | MFP_LPM_DRIVE_LOW,    /* WLAN_PWEN */
+
+        /* NAND controls */
+        GPIO11_GPIO     | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
+        GPIO56_GPIO,                            /* NAND Ready/Busy */
+
+        /* interrupts */
+        GPIO13_GPIO,    /* MMC card detect */
+        GPIO41_GPIO,    /* DM9000 interrupt */
+};
 
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
         [0] = {
                 .start = PXA_CS2_PHYS,
                 .end   = PXA_CS2_PHYS + 3,
@@ -56,32 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
         }
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
         .flags          = DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
         .name           = "dm9000",
         .id             = 0,
-        .num_resources  = ARRAY_SIZE(em_x270_dm9k_resource),
-        .resource       = em_x270_dm9k_resource,
+        .num_resources  = ARRAY_SIZE(em_x270_dm9000_resource),
+        .resource       = em_x270_dm9000_resource,
         .dev            = {
-                .platform_data = &em_x270_dm9k_platdata,
+                .platform_data = &em_x270_dm9000_platdata,
         }
 };
 
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
-        .name           = "wm97xx-ts",
-        .id             = -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+        platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
 
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource em_x270_v3020_resource[] = {
         [0] = {
                 .start = PXA_CS4_PHYS,
@@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
         }
 };
 
-/* NAND flash */
-#define GPIO_NAND_CS    (11)
-#define GPIO_NAND_RB    (56)
+static void __init em_x270_init_rtc(void)
+{
+        platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
 
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static inline void nand_cs_on(void)
 {
-        GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+        gpio_set_value(GPIO11_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
         dsb();
 
-        GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+        gpio_set_value(GPIO11_NAND_CS, 1);
 }
 
 /* hardware specific access to control-lines */
@@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
         dsb();
 
-        return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+        return gpio_get_value(GPIO56_NAND_RB);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
         }
 };
 
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-        &em_x270_dm9k,
-        &em_x270_ts,
-        &em_x270_rtc,
-        &em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+        int err;
 
+        err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+        if (err) {
+                pr_warning("EM-X270: failed to request NAND CS gpio\n");
+                return;
+        }
+
+        gpio_direction_output(GPIO11_NAND_CS, 1);
+
+        err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+        if (err) {
+                pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+                gpio_free(GPIO11_NAND_CS);
+                return;
+        }
+
+        gpio_direction_input(GPIO56_NAND_RB);
+
+        platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
         /* Set the Power Control Polarity Low */
@@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
         .init           = em_x270_ohci_init,
 };
 
+static void __init em_x270_init_ohci(void)
+{
+        pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
 
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int em_x270_mci_init(struct device *dev,
                             irq_handler_t em_x270_detect_int,
                             void *data)
 {
-        int err;
-
-        /* setup GPIO for PXA27x MMC controller */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-        /* EM-X270 uses GPIO13 as SD power enable */
-        pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
-        err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
-                          IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-                          "MMC card detect", data);
+        int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+                              IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+                              "MMC card detect", data);
         if (err) {
                 printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
                        __func__, err);
@@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-        free_irq(EM_X270_MMC_IRQ, data);
+        int irq = gpio_to_irq(GPIO13_MMC_CD);
+        free_irq(irq, data);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
         .exit           = em_x270_mci_exit,
 };
 
+static void __init em_x270_init_mmc(void)
+{
+        pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
 /* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info em_x270_lcd_mode = {
         .pixclock       = 50000,
         .bpp            = 16,
@@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
 static struct pxafb_mach_info em_x270_lcd = {
         .modes          = &em_x270_lcd_mode,
         .num_modes      = 1,
-        .cmap_inverse   = 0,
-        .cmap_static    = 0,
-        .lccr0          = LCCR0_PAS,
-        .lccr3          = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+        .lcd_conn       = LCD_COLOR_TFT_16BPP,
 };
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
 {
-        /* setup LCD */
         set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
 
-        /* register EM-X270 platform devices */
-        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
         pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+        KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+        KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+        KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
 
-        /* set MCI and OHCI platform parameters */
-        pxa_set_mci_info(&em_x270_mci_platform_data);
-        pxa_set_ohci_info(&em_x270_ohci_platform_data);
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+        /* code map for the matrix keys */
+        .matrix_key_rows        = 3,
+        .matrix_key_cols        = 3,
+        .matrix_key_map         = em_x270_matrix_keys,
+        .matrix_key_map_size    = ARRAY_SIZE(em_x270_matrix_keys),
+};
+
+static void __init em_x270_init_keypad(void)
+{
+        pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
 
-        /* setup STUART GPIOs */
-        pxa_gpio_mode(GPIO46_STRXD_MD);
-        pxa_gpio_mode(GPIO47_STTXD_MD);
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+        [0] = {
+                .desc   = "sleep/wakeup",
+                .code   = KEY_SUSPEND,
+                .type   = EV_PWR,
+                .gpio   = 1,
+                .wakeup = 1,
+        },
+};
 
-        /* setup BTUART GPIOs */
-        pxa_gpio_mode(GPIO42_BTRXD_MD);
-        pxa_gpio_mode(GPIO43_BTTXD_MD);
-        pxa_gpio_mode(GPIO44_BTCTS_MD);
-        pxa_gpio_mode(GPIO45_BTRTS_MD);
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+        .buttons        = gpio_keys_button,
+        .nbuttons       = 1,
+};
 
-        /* Setup interrupt for dm9000 */
-        set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static struct platform_device em_x270_gpio_keys = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &em_x270_gpio_keys_data,
+        },
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+        platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+static void __init em_x270_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+        em_x270_init_dm9000();
+        em_x270_init_rtc();
+        em_x270_init_nand();
+        em_x270_init_lcd();
+        em_x270_init_mmc();
+        em_x270_init_ohci();
+        em_x270_init_keypad();
+        em_x270_init_gpio_keys();
+        em_x270_init_ac97();
 }
 
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
         .boot_params    = 0xa0000100,
         .phys_io        = 0x40000000,
         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index ee0ae93c876a..c29b7b21c11b 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -17,7 +17,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/mach-types.h>
 
-#include <generic.h>
+#include "generic.h"
 
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
@@ -47,6 +47,19 @@ MACHINE_START(E330, "Toshiba e330")
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_E350
+MACHINE_START(E350, "Toshiba e350")
+        /* Maintainer: Ian Molton (spyro@f2s.com) */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa25x_init_irq,
+        .fixup          = eseries_fixup,
+        .timer = &pxa_timer,
+MACHINE_END
+#endif
+
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
new file mode 100644
index 000000000000..362847a10998
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -0,0 +1,57 @@
+/*
+ * UDC functions for the Toshiba e-series PDAs
+ *
+ * Copyright (c) Ian Molton 2003
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/arch/udc.h>
+#include <asm/arch/eseries-gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+/* local PXA generic code */
+#include "generic.h"
+
+static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+        .gpio_vbus   = GPIO_E7XX_USB_DISC,
+        .gpio_pullup = GPIO_E7XX_USB_PULLUP,
+        .gpio_pullup_inverted = 1
+};
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+        .gpio_vbus   = GPIO_E800_USB_DISC,
+        .gpio_pullup = GPIO_E800_USB_PULLUP,
+        .gpio_pullup_inverted = 1
+};
+
+static int __init eseries_udc_init(void)
+{
+        if (machine_is_e330() || machine_is_e350() ||
+            machine_is_e740() || machine_is_e750() ||
+            machine_is_e400())
+                pxa_set_udc_info(&e7xx_udc_mach_info);
+        else if (machine_is_e800())
+                pxa_set_udc_info(&e800_udc_mach_info);
+
+        return 0;
+}
+
+module_init(eseries_udc_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("eseries UDC support");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 000000000000..0143eed65398
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,220 @@
+/*
+ *  ezx.c - Common code for the EZX platform.
+ *
+ *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ *                2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ *                2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/i2c.h>
+
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = 1023,
+        .dft_brightness = 1023,
+        .pwm_period_ns  = 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+        .name           = "pwm-backlight",
+        .dev            = {
+                .parent = &pxa27x_device_pwm0.dev,
+                .platform_data = &ezx_backlight_data,
+        },
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+        .pixclock               = 150000,
+        .xres                   = 240,
+        .yres                   = 320,
+        .bpp                    = 16,
+        .hsync_len              = 10,
+        .left_margin            = 20,
+        .right_margin           = 10,
+        .vsync_len              = 2,
+        .upper_margin           = 3,
+        .lower_margin           = 2,
+        .sync                   = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+        .modes          = &mode_ezx_old,
+        .num_modes      = 1,
+        .lcd_conn       = LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+        .pixclock               = 192308,
+        .xres                   = 240,
+        .yres                   = 320,
+        .bpp                    = 32,
+        .depth                  = 18,
+        .hsync_len              = 10,
+        .left_margin            = 20,
+        .right_margin           = 10,
+        .vsync_len              = 2,
+        .upper_margin           = 3,
+        .lower_margin           = 2,
+        .sync                   = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+        .modes          = &mode_72r89803y01,
+        .num_modes      = 1,
+        .lcd_conn       = LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+        /* PWM backlight */
+        GPIO16_PWM0_OUT,
+
+        /* BTUART */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* STUART */
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+
+        /* For A780 support (connected with Neptune GSM chip) */
+        GPIO30_USB_P3_2,        /* ICL_TXENB */
+        GPIO31_USB_P3_6,        /* ICL_VPOUT */
+        GPIO90_USB_P3_5,        /* ICL_VPIN */
+        GPIO91_USB_P3_1,        /* ICL_XRXD */
+        GPIO56_USB_P3_4,        /* ICL_VMOUT */
+        GPIO113_USB_P3_3,       /* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+        pxa_set_i2c_info(NULL);
+        if (machine_is_ezx_a780() || machine_is_ezx_e680())
+                set_pxa_fb_info(&ezx_fb_info_1);
+        else
+                set_pxa_fb_info(&ezx_fb_info_2);
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+                char **cmdline, struct meminfo *mi)
+{
+        /* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+         * 16MB one at 0xAC000000
+         */
+        mi->nr_banks = 2;
+        mi->bank[0].start = 0xa0000000;
+        mi->bank[0].node = 0;
+        mi->bank[0].size = (32*1024*1024);
+        mi->bank[1].start = 0xac000000;
+        mi->bank[1].node = 1;
+        mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 530654474bb2..dd759d03a9fd 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -38,6 +39,7 @@
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ssp.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
 #include <asm/arch/littleton.h>
 
 #include "generic.h"
@@ -101,18 +103,26 @@ static struct resource smc91x_resources[] = {
         [1] = {
                 .start  = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
                 .end    = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-                .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
         }
 };
 
+static struct smc91x_platdata littleton_smc91x_info = {
+        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+                  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &littleton_smc91x_info,
+        },
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /* use bit 30, 31 as the indicator of command parameter number */
 #define CMD0(x)         ((0x00000000) | ((x) << 9))
 #define CMD1(x, x1)     ((0x40000000) | ((x) << 9) | 0x100 | (x1))
@@ -311,9 +321,9 @@ static void littleton_init_lcd(void)
 }
 #else
 static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
         /* KEY(row, col, key_code) */
         KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@@ -361,6 +371,57 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+        [0] = {
+                .name        = "Bootloader",
+                .offset      = 0,
+                .size        = 0x060000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [1] = {
+                .name        = "Kernel",
+                .offset      = 0x060000,
+                .size        = 0x200000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [2] = {
+                .name        = "Filesystem",
+                .offset      = 0x0260000,
+                .size        = 0x3000000,     /* 48M - rootfs */
+        },
+        [3] = {
+                .name        = "MassStorage",
+                .offset      = 0x3260000,
+                .size        = 0x3d40000,
+        },
+        [4] = {
+                .name        = "BBT",
+                .offset      = 0x6FA0000,
+                .size        = 0x80000,
+                .mask_flags  = MTD_WRITEABLE,  /* force read-only */
+        },
+        /* NOTE: we reserve some blocks at the end of the NAND flash for
+         * bad block management, and the max number of relocation blocks
+         * differs on different platforms. Please take care with it when
+         * defining the partition table.
+         */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+        .enable_arbiter = 1,
+        .parts          = littleton_nand_partitions,
+        .nr_parts       = ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+        pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init littleton_init(void)
 {
         /* initialize MFP configurations */
@@ -374,6 +435,7 @@ static void __init littleton_init(void)
 
         littleton_init_lcd();
         littleton_init_keypad();
+        littleton_init_nand();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index cc1c4fa06145..8d1ab54e7b20 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void)
                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
         }
         set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
-        set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+        set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a3fae4139203..af7375bb46a4 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -151,7 +152,7 @@ static void __init lubbock_init_irq(void)
         }
 
         set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
-        set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+        set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -226,14 +227,6 @@ static struct pxa2xx_spi_master pxa_ssp_master_info = {
         .num_chipselect = 0,
 };
 
-static struct platform_device pxa_ssp = {
-        .name           = "pxa2xx-spi",
-        .id             = 1,
-        .dev = {
-                .platform_data  = &pxa_ssp_master_info,
-        },
-};
-
 static int lubbock_ads7846_pendown_state(void)
 {
         /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
@@ -292,11 +285,18 @@ static struct resource smc91x_resources[] = {
         },
 };
 
+static struct smc91x_platdata lubbock_smc91x_info = {
+        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = -1,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &lubbock_smc91x_info,
+        },
 };
 
 static struct resource flash_resources[] = {
@@ -367,7 +367,6 @@ static struct platform_device *devices[] __initdata = {
         &smc91x_device,
         &lubbock_flash_device[0],
         &lubbock_flash_device[1],
-        &pxa_ssp,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -471,6 +470,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
         } else if (mode & IR_FIRMODE) {
                 LUB_MISC_WR |= 1 << 4;
         }
+        pxa2xx_transceiver_mode(dev, mode);
         local_irq_restore(flags);
 }
 
@@ -501,6 +501,7 @@ static void __init lubbock_init(void)
         lubbock_flash_data[flashboot].name = "boot-rom";
         (void) platform_add_devices(devices, ARRAY_SIZE(devices));
 
+        pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
         spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 01b2fa790217..c9d274f0048f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -17,17 +17,15 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/gpio.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -44,7 +42,7 @@
 #include "devices.h"
 #include "generic.h"
 
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
 
         /* SDRAM and Static Memory I/O Signals */
         GPIO20_nSDCS_2,
@@ -134,6 +132,7 @@ static unsigned long magician_pin_config[] = {
 static void magician_irda_transceiver_mode(struct device *dev, int mode)
 {
         gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data magician_ficp_info = {
@@ -399,6 +398,7 @@ static struct platform_pwm_backlight_data backlight_data = {
 
 static struct platform_device backlight = {
         .name = "pwm-backlight",
+        .id   = -1,
         .dev  = {
                 .parent        = &pxa27x_device_pwm0.dev,
                 .platform_data = &backlight_data,
@@ -511,6 +511,37 @@ static struct platform_device pasic3 = {
  * External power
  */
 
+static int power_supply_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+        if (ret)
+                goto err_cs_ac;
+        ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+        if (ret)
+                goto err_cs_usb;
+        ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+        if (ret)
+                goto err_chg_en;
+        ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+        if (!ret)
+                ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+        if (ret)
+                goto err_nchg_en;
+
+        return 0;
+
+err_nchg_en:
+        gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+        return ret;
+}
+
 static int magician_is_ac_online(void)
 {
         return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -527,14 +558,24 @@ static void magician_set_charge(int flags)
         gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
 }
 
+static void power_supply_exit(struct device *dev)
+{
+        gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+        gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
 static char *magician_supplicants[] = {
         "ds2760-battery.0", "backup-battery"
 };
 
 static struct pda_power_pdata power_supply_info = {
+        .init            = power_supply_init,
         .is_ac_online    = magician_is_ac_online,
         .is_usb_online   = magician_is_usb_online,
         .set_charge      = magician_set_charge,
+        .exit            = power_supply_exit,
         .supplied_to     = magician_supplicants,
         .num_supplicants = ARRAY_SIZE(magician_supplicants),
 };
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f2e9e7c4da8e..c8e38b5ff1c4 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -26,6 +26,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -110,9 +111,9 @@ static unsigned long mainstone_pin_config[] = {
         GPIO45_AC97_SYSCLK,
 
         /* Keypad */
-        GPIO93_KP_DKIN_0        | WAKEUP_ON_LEVEL_HIGH,
-        GPIO94_KP_DKIN_1        | WAKEUP_ON_LEVEL_HIGH,
-        GPIO95_KP_DKIN_2        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO93_KP_DKIN_0,
+        GPIO94_KP_DKIN_1,
+        GPIO95_KP_DKIN_2,
         GPIO100_KP_MKIN_0       | WAKEUP_ON_LEVEL_HIGH,
         GPIO101_KP_MKIN_1       | WAKEUP_ON_LEVEL_HIGH,
         GPIO102_KP_MKIN_2       | WAKEUP_ON_LEVEL_HIGH,
@@ -190,7 +191,7 @@ static void __init mainstone_init_irq(void)
         MST_INTSETCLR = 0;
 
         set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
-        set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+        set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -240,11 +241,19 @@ static struct resource smc91x_resources[] = {
         }
 };
 
+static struct smc91x_platdata mainstone_smc91x_info = {
+        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+                  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &mainstone_smc91x_info,
+        },
 };
 
 static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
@@ -455,6 +464,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
         } else if (mode & IR_FIRMODE) {
                 MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
         }
+        pxa2xx_transceiver_mode(dev, mode);
         if (mode & IR_OFF) {
                 MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
         } else {
@@ -513,7 +523,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
         .init           = mainstone_ohci_init,
 };
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int mainstone_matrix_keys[] = {
         KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
         KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index d1cdb4ecb0b8..fd4545eab803 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -39,6 +39,28 @@ struct gpio_desc {
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
 
+static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
+{
+        unsigned mask = GPIO_bit(gpio);
+
+        /* low power state */
+        switch (lpm) {
+        case MFP_LPM_DRIVE_HIGH:
+                PGSR(gpio) |= mask;
+                break;
+        case MFP_LPM_DRIVE_LOW:
+                PGSR(gpio) &= ~mask;
+                break;
+        case MFP_LPM_INPUT:
+                break;
+        default:
+                pr_warning("%s: invalid low power state for GPIO%d\n",
+                                __func__, gpio);
+                return -EINVAL;
+        }
+        return 0;
+}
+
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
         unsigned long gafr, mask = GPIO_bit(gpio);
@@ -57,21 +79,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
         else
                 GPDR(gpio) &= ~mask;
 
-        /* low power state */
-        switch (c & MFP_LPM_STATE_MASK) {
-        case MFP_LPM_DRIVE_HIGH:
-                PGSR(gpio) |= mask;
-                break;
-        case MFP_LPM_DRIVE_LOW:
-                PGSR(gpio) &= ~mask;
-                break;
-        case MFP_LPM_INPUT:
-                break;
-        default:
-                pr_warning("%s: invalid low power state for GPIO%d\n",
-                                __func__, gpio);
+        if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
                 return -EINVAL;
-        }
 
         /* give early warning if MFP_LPM_CAN_WAKEUP is set on the
          * configurations of those pins not able to wakeup
@@ -91,6 +100,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
         return 0;
 }
 
+static inline int __mfp_validate(int mfp)
+{
+        int gpio = mfp_to_gpio(mfp);
+
+        if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+                pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+                return -1;
+        }
+
+        return gpio;
+}
+
 void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
         unsigned long flags;
@@ -99,13 +120,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
         for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
 
-                gpio = mfp_to_gpio(MFP_PIN(*c));
-
-                if (!gpio_desc[gpio].valid) {
-                        pr_warning("%s: GPIO%d is invalid pin\n",
-                                __func__, gpio);
+                gpio = __mfp_validate(MFP_PIN(*c));
+                if (gpio < 0)
                         continue;
-                }
 
                 local_irq_save(flags);
 
@@ -116,6 +133,20 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
         }
 }
 
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+        unsigned long flags;
+        int gpio;
+
+        gpio = __mfp_validate(mfp);
+        if (gpio < 0)
+                return;
+
+        local_irq_save(flags);
+        __mfp_config_lpm(gpio, lpm);
+        local_irq_restore(flags);
+}
+
 int gpio_set_wake(unsigned int gpio, unsigned int on)
 {
         struct gpio_desc *d;
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 000000000000..408657a24f8c
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,416 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *              Alex Osborne <ato@meshy.org>
+ *              Cristiano P. <cristianop@users.sourceforge.net>
+ *              Jan Herman <2hp@seznam.cz>
+ *              Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/audio.h>
+#include <asm/arch/palmtx.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+        /* MMC */
+        GPIO32_MMC_CLK,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+        GPIO112_MMC_CMD,
+
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
+        /* IrDA */
+        GPIO46_FICP_RXD,
+        GPIO47_FICP_TXD,
+
+        /* PWM */
+        GPIO16_PWM0_OUT,
+
+        /* USB */
+        GPIO13_GPIO,
+
+        /* PCMCIA */
+        GPIO48_nPOE,
+        GPIO49_nPWE,
+        GPIO50_nPIOR,
+        GPIO51_nPIOW,
+        GPIO85_nPCE_1,
+        GPIO54_nPCE_2,
+        GPIO79_PSKTSEL,
+        GPIO55_nPREG,
+        GPIO56_nPWAIT,
+        GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+                                void *data)
+{
+        int err = 0;
+
+        /* Setup an interrupt for detecting card insert/remove events */
+        err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+                        IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+                        IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+                        "SD/MMC card detect", data);
+        if (err) {
+                printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+                                __func__);
+                return err;
+        }
+
+        err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+        if (err)
+                goto pwr_err;
+
+        err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+        if (err)
+                goto ro_err;
+
+        printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+        return 0;
+
+ro_err:
+        gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+        free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+        return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+        gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+        gpio_free(GPIO_NR_PALMTX_SD_POWER);
+        free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+        struct pxamci_platform_data *p_d = dev->platform_data;
+        gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+        return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+        .ocr_mask       = MMC_VDD_32_33 | MMC_VDD_33_34,
+        .setpower       = palmtx_mci_power,
+        .get_ro         = palmtx_mci_get_ro,
+        .init           = palmtx_mci_init,
+        .exit           = palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+        KEY(0, 0, KEY_POWER),
+        KEY(0, 1, KEY_F1),
+        KEY(0, 2, KEY_ENTER),
+
+        KEY(1, 0, KEY_F2),
+        KEY(1, 1, KEY_F3),
+        KEY(1, 2, KEY_F4),
+
+        KEY(2, 0, KEY_UP),
+        KEY(2, 2, KEY_DOWN),
+
+        KEY(3, 0, KEY_RIGHT),
+        KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+        .matrix_key_rows        = 4,
+        .matrix_key_cols        = 3,
+        .matrix_key_map         = palmtx_matrix_keys,
+        .matrix_key_map_size    = ARRAY_SIZE(palmtx_matrix_keys),
+
+        .debounce_interval      = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+        {KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+        .buttons        = palmtx_pxa_buttons,
+        .nbuttons       = ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data = &palmtx_pxa_keys_data,
+        },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+        if (ret)
+                goto err;
+        ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+        if (ret)
+                goto err2;
+
+        return 0;
+err2:
+        gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+        return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+        gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+        gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+        return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+        gpio_free(GPIO_NR_PALMTX_BL_POWER);
+        gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = PALMTX_MAX_INTENSITY,
+        .dft_brightness = PALMTX_MAX_INTENSITY,
+        .pwm_period_ns  = PALMTX_PERIOD_NS,
+        .init           = palmtx_backlight_init,
+        .notify         = palmtx_backlight_notify,
+        .exit           = palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+        .name   = "pwm-backlight",
+        .dev    = {
+                .parent         = &pxa27x_device_pwm0.dev,
+                .platform_data  = &palmtx_backlight_data,
+        },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+        gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+        pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+        .transceiver_cap        = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+        .transceiver_mode       = palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+        gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+        udelay(50);
+        gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+        .gpio_vbus              = GPIO_NR_PALMTX_USB_DETECT_N,
+        .gpio_vbus_inverted     = 1,
+        .udc_command            = palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+        if (ret)
+                goto err_cs_ac;
+
+        ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+        if (ret)
+                goto err_cs_usb;
+
+        return 0;
+
+err_cs_usb:
+        gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+        return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+        return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+        return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+        gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+        gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+        "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+        .init            = power_supply_init,
+        .is_ac_online    = palmtx_is_ac_online,
+        .is_usb_online   = palmtx_is_usb_online,
+        .exit            = power_supply_exit,
+        .supplied_to     = palmtx_supplicants,
+        .num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+        .name = "pda-power",
+        .id   = -1,
+        .dev  = {
+                .platform_data = &power_supply_info,
+        },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+        .pixclock       = 57692,
+        .xres           = 320,
+        .yres           = 480,
+        .bpp            = 16,
+
+        .left_margin    = 32,
+        .right_margin   = 1,
+        .upper_margin   = 7,
+        .lower_margin   = 1,
+
+        .hsync_len      = 4,
+        .vsync_len      = 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+        .modes          = palmtx_lcd_modes,
+        .num_modes      = ARRAY_SIZE(palmtx_lcd_modes),
+        .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &palmtx_pxa_keys,
+#endif
+        &palmtx_backlight,
+        &power_supply,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+        .virtual        = PALMTX_PCMCIA_VIRT,
+        .pfn            = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+        .length         = PALMTX_PCMCIA_SIZE,
+        .type           = MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+        pxa_map_io();
+        iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+        set_pxa_fb_info(&palmtx_lcd_screen);
+        pxa_set_mci_info(&palmtx_mci_platform_data);
+        pxa_set_udc_info(&palmtx_udc_info);
+        pxa_set_ac97_info(NULL);
+        pxa_set_ficp_info(&palmtx_ficp_platform_data);
+        pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+        .phys_io        = PALMTX_PHYS_IO_START,
+        .io_pg_offst    = io_p2v(0x40000000),
+        .boot_params    = 0xa0000100,
+        .map_io         = palmtx_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = palmtx_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 3b945eb0aee3..377f3be8ce57 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -24,7 +24,9 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
 #include <linux/leds.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/arch/hardware.h>
@@ -108,6 +110,32 @@ static struct platform_device smc91x_device = {
         .resource       = smc91x_resources,
 };
 
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+        .num_chipselect = 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+        .base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+        {
+                .modalias       = "max7301",
+                .platform_data  = &max7301_info,
+                .max_speed_hz   = 13000000,
+                .bus_num        = 1,
+                .chip_select    = 0,
+                .mode           = SPI_MODE_0,
+        },
+};
+
+/*
+ * NOR flash
+ */
 static struct physmap_flash_data pcm027_flash_data = {
         .width  = 4,
 };
@@ -190,6 +218,9 @@ static void __init pcm027_init(void)
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
         pcm990_baseboard_init();
 #endif
+
+        pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+        spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
 static void __init pcm027_map_io(void)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 5d87c7c866e4..30023b00e476 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -33,14 +33,30 @@
 #include <asm/arch/camera.h>
 #include <asm/mach/map.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pcm990_baseboard.h>
 #include <asm/arch/pxafb.h>
+#include <asm/arch/mfp-pxa27x.h>
 
 #include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+        /* MMC */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+        /* USB */
+        GPIO88_USBH1_PWR,
+        GPIO89_USBH1_PEN,
+        /* PWM0 */
+        GPIO16_PWM0_OUT,
+};
 
 /*
  * pcm990_lcd_power - control power supply to the LCD
@@ -277,16 +293,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 {
         int err;
 
-        /*
-         * enable GPIO for PXA27x MMC controller
-         */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
         err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
                              "MMC card detect", data);
         if (err)
@@ -333,8 +339,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
  */
 static int pcm990_ohci_init(struct device *dev)
 {
-        pxa_gpio_mode(PCM990_USB_OVERCURRENT);
-        pxa_gpio_mode(PCM990_USB_PWR_EN);
         /*
          * disable USB port 2 and 3
          * power sense is active low
@@ -361,23 +365,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
  * PXA27x Camera specific stuff
  */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+        /* CIF */
+        GPIO98_CIF_DD_0,
+        GPIO105_CIF_DD_1,
+        GPIO104_CIF_DD_2,
+        GPIO103_CIF_DD_3,
+        GPIO95_CIF_DD_4,
+        GPIO94_CIF_DD_5,
+        GPIO93_CIF_DD_6,
+        GPIO108_CIF_DD_7,
+        GPIO107_CIF_DD_8,
+        GPIO106_CIF_DD_9,
+        GPIO42_CIF_MCLK,
+        GPIO45_CIF_PCLK,
+        GPIO43_CIF_FV,
+        GPIO44_CIF_LV,
+};
+
 static int pcm990_pxacamera_init(struct device *dev)
 {
-        pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
-        pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
-        pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
-        pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
-        pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
-        pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
-        pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
-        pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
-        pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
-        pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
-        pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
-        pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
-        pxa_gpio_mode(GPIO43_CIF_FV_MD);
-        pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
         return 0;
 }
 
@@ -449,8 +457,10 @@ static struct map_desc pcm990_io_desc[] __initdata = {
  */
 void __init pcm990_baseboard_init(void)
 {
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
         /* register CPLD access */
-        iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+        iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
         /* register CPLD's IRQ controller */
         pcm990_init_irq();
@@ -458,7 +468,6 @@ void __init pcm990_baseboard_init(void)
 #ifndef CONFIG_PCM990_DISPLAY_NONE
         set_pxa_fb_info(&pcm990_fbinfo);
 #endif
-        pxa_gpio_mode(GPIO16_PWM0_MD);
         platform_device_register(&pcm990_backlight_device);
 
         /* MMC */
@@ -473,9 +482,8 @@ void __init pcm990_baseboard_init(void)
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
         pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
-        i2c_register_board_info(0, pcm990_i2c_devices,
-                ARRAY_SIZE(pcm990_i2c_devices));
+        i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
 #endif
 
-        printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+        printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
 }
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f81c10cafd48..39612cfa0b4d 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -267,6 +267,7 @@ static void poodle_irda_transceiver_mode(struct device *dev, int mode)
         } else {
                 GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
         }
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 4cd50e3005e9..c5b845b935bb 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -109,6 +109,52 @@ static const struct clkops clk_pxa25x_lcd_ops = {
         .getrate        = clk_pxa25x_lcd_getrate,
 };
 
+static unsigned long gpio12_config_32k[] = {
+        GPIO12_32KHz,
+};
+
+static unsigned long gpio12_config_gpio[] = {
+        GPIO12_GPIO,
+};
+
+static void clk_gpio12_enable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio12_config_32k, 1);
+}
+
+static void clk_gpio12_disable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio12_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio12_ops = {
+        .enable         = clk_gpio12_enable,
+        .disable        = clk_gpio12_disable,
+};
+
+static unsigned long gpio11_config_3m6[] = {
+        GPIO11_3_6MHz,
+};
+
+static unsigned long gpio11_config_gpio[] = {
+        GPIO11_GPIO,
+};
+
+static void clk_gpio11_enable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio11_config_3m6, 1);
+}
+
+static void clk_gpio11_disable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio11_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio11_ops = {
+        .enable         = clk_gpio11_enable,
+        .disable        = clk_gpio11_disable,
+};
+
 /*
  * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@@ -128,6 +174,8 @@ static struct clk pxa25x_clks[] = {
         INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
         INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
         INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
+        INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
+        INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
         INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
         INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
 
@@ -145,7 +193,10 @@ static struct clk pxa25x_clks[] = {
         INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
 
-static struct clk gpio7_clk = INIT_CKOTHER("GPIO7_CK", &pxa25x_clks[4], NULL);
+static struct clk pxa2xx_clk_aliases[] = {
+        INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
+        INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
+};
 
 #ifdef CONFIG_PM
 
@@ -293,7 +344,7 @@ static int __init pxa25x_init(void)
         int i, ret = 0;
 
         /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-        if (cpu_is_pxa25x())
+        if (cpu_is_pxa255())
                 clks_register(&pxa25x_hwuart_clk, 1);
 
         if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
@@ -317,10 +368,10 @@ static int __init pxa25x_init(void)
         }
 
         /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-        if (cpu_is_pxa25x())
+        if (cpu_is_pxa255())
                 ret = platform_device_register(&pxa_device_hwuart);
 
-        clks_register(&gpio7_clk, 1);
+        clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
 
         return ret;
 }
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 0a0d3877f212..da92e9733886 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -15,10 +15,16 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
 #include <asm/arch/mfp-pxa300.h>
 
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
 static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
         MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
@@ -79,15 +85,26 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
         MFP_ADDR_END,
 };
 
+static struct clk common_clks[] = {
+        PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+};
+
+static struct clk pxa310_clks[] = {
+        PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+};
+
 static int __init pxa300_init(void)
 {
         if (cpu_is_pxa300() || cpu_is_pxa310()) {
                 pxa3xx_init_mfp();
                 pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+                clks_register(ARRAY_AND_SIZE(common_clks));
         }
 
-        if (cpu_is_pxa310())
+        if (cpu_is_pxa310()) {
                 pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+                clks_register(ARRAY_AND_SIZE(pxa310_clks));
+        }
 
         return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 74128eb8f8d0..c557c23a1efe 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -15,11 +15,17 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/arch/mfp.h>
+#include <asm/arch/pxa3xx-regs.h>
 #include <asm/arch/mfp-pxa320.h>
 
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
 static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
         MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
@@ -74,16 +80,17 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
         MFP_ADDR_END,
 };
 
-static void __init pxa320_init_mfp(void)
-{
-        pxa3xx_init_mfp();
-        pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-}
+static struct clk pxa320_clks[] = {
+        PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+};
 
 static int __init pxa320_init(void)
 {
-        if (cpu_is_pxa320())
-                pxa320_init_mfp();
+        if (cpu_is_pxa320()) {
+                pxa3xx_init_mfp();
+                pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+                clks_register(ARRAY_AND_SIZE(pxa320_clks));
+        }
 
         return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 15685d2b8f8c..f491025a0c82 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -144,7 +144,7 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
         return hsio_clk;
 }
 
-static void clk_pxa3xx_cken_enable(struct clk *clk)
+void clk_pxa3xx_cken_enable(struct clk *clk)
 {
         unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -154,7 +154,7 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
                 CKENB |= mask;
 }
 
-static void clk_pxa3xx_cken_disable(struct clk *clk)
+void clk_pxa3xx_cken_disable(struct clk *clk)
 {
         unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -164,7 +164,7 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
                 CKENB &= ~mask;
 }
 
-static const struct clkops clk_pxa3xx_cken_ops = {
+const struct clkops clk_pxa3xx_cken_ops = {
         .enable         = clk_pxa3xx_cken_enable,
         .disable        = clk_pxa3xx_cken_disable,
 };
@@ -196,24 +196,6 @@ static const struct clkops clk_pout_ops = {
         .disable        = clk_pout_disable,
 };
 
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)  \
-        {                                               \
-                .name   = _name,                        \
-                .dev    = _dev,                         \
-                .ops    = &clk_pxa3xx_cken_ops,         \
-                .rate   = _rate,                        \
-                .cken   = CKEN_##_cken,                 \
-                .delay  = _delay,                       \
-        }
-
-#define PXA3xx_CK(_name, _cken, _ops, _dev)             \
-        {                                               \
-                .name   = _name,                        \
-                .dev    = _dev,                         \
-                .ops    = _ops,                         \
-                .cken   = CKEN_##_cken,                 \
-        }
-
 static struct clk pxa3xx_clks[] = {
         {
                 .name           = "CLK_POUT",
@@ -244,7 +226,6 @@ static struct clk pxa3xx_clks[] = {
 
         PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
         PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
-        PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
 };
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
new file mode 100644
index 000000000000..9503897d049c
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa930.c
+ *
+ * Code specific to PXA930
+ *
+ * Copyright (C) 2007-2008 Marvell Internation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp-pxa930.h>
+
+static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+
+        MFP_ADDR(GPIO0, 0x02e0),
+        MFP_ADDR(GPIO1, 0x02dc),
+        MFP_ADDR(GPIO2, 0x02e8),
+        MFP_ADDR(GPIO3, 0x02d8),
+        MFP_ADDR(GPIO4, 0x02e4),
+        MFP_ADDR(GPIO5, 0x02ec),
+        MFP_ADDR(GPIO6, 0x02f8),
+        MFP_ADDR(GPIO7, 0x02fc),
+        MFP_ADDR(GPIO8, 0x0300),
+        MFP_ADDR(GPIO9, 0x02d4),
+        MFP_ADDR(GPIO10, 0x02f4),
+        MFP_ADDR(GPIO11, 0x02f0),
+        MFP_ADDR(GPIO12, 0x0304),
+        MFP_ADDR(GPIO13, 0x0310),
+        MFP_ADDR(GPIO14, 0x0308),
+        MFP_ADDR(GPIO15, 0x030c),
+        MFP_ADDR(GPIO16, 0x04e8),
+        MFP_ADDR(GPIO17, 0x04f4),
+        MFP_ADDR(GPIO18, 0x04f8),
+        MFP_ADDR(GPIO19, 0x04fc),
+        MFP_ADDR(GPIO20, 0x0518),
+        MFP_ADDR(GPIO21, 0x051c),
+        MFP_ADDR(GPIO22, 0x04ec),
+        MFP_ADDR(GPIO23, 0x0500),
+        MFP_ADDR(GPIO24, 0x04f0),
+        MFP_ADDR(GPIO25, 0x0504),
+        MFP_ADDR(GPIO26, 0x0510),
+        MFP_ADDR(GPIO27, 0x0514),
+        MFP_ADDR(GPIO28, 0x0520),
+        MFP_ADDR(GPIO29, 0x0600),
+        MFP_ADDR(GPIO30, 0x0618),
+        MFP_ADDR(GPIO31, 0x0610),
+        MFP_ADDR(GPIO32, 0x060c),
+        MFP_ADDR(GPIO33, 0x061c),
+        MFP_ADDR(GPIO34, 0x0620),
+        MFP_ADDR(GPIO35, 0x0628),
+        MFP_ADDR(GPIO36, 0x062c),
+        MFP_ADDR(GPIO37, 0x0630),
+        MFP_ADDR(GPIO38, 0x0634),
+        MFP_ADDR(GPIO39, 0x0638),
+        MFP_ADDR(GPIO40, 0x063c),
+        MFP_ADDR(GPIO41, 0x0614),
+        MFP_ADDR(GPIO42, 0x0624),
+        MFP_ADDR(GPIO43, 0x0608),
+        MFP_ADDR(GPIO44, 0x0604),
+        MFP_ADDR(GPIO45, 0x050c),
+        MFP_ADDR(GPIO46, 0x0508),
+        MFP_ADDR(GPIO47, 0x02bc),
+        MFP_ADDR(GPIO48, 0x02b4),
+        MFP_ADDR(GPIO49, 0x02b8),
+        MFP_ADDR(GPIO50, 0x02c8),
+        MFP_ADDR(GPIO51, 0x02c0),
+        MFP_ADDR(GPIO52, 0x02c4),
+        MFP_ADDR(GPIO53, 0x02d0),
+        MFP_ADDR(GPIO54, 0x02cc),
+        MFP_ADDR(GPIO55, 0x029c),
+        MFP_ADDR(GPIO56, 0x02a0),
+        MFP_ADDR(GPIO57, 0x0294),
+        MFP_ADDR(GPIO58, 0x0298),
+        MFP_ADDR(GPIO59, 0x02a4),
+        MFP_ADDR(GPIO60, 0x02a8),
+        MFP_ADDR(GPIO61, 0x02b0),
+        MFP_ADDR(GPIO62, 0x02ac),
+        MFP_ADDR(GPIO63, 0x0640),
+        MFP_ADDR(GPIO64, 0x065c),
+        MFP_ADDR(GPIO65, 0x0648),
+        MFP_ADDR(GPIO66, 0x0644),
+        MFP_ADDR(GPIO67, 0x0674),
+        MFP_ADDR(GPIO68, 0x0658),
+        MFP_ADDR(GPIO69, 0x0654),
+        MFP_ADDR(GPIO70, 0x0660),
+        MFP_ADDR(GPIO71, 0x0668),
+        MFP_ADDR(GPIO72, 0x0664),
+        MFP_ADDR(GPIO73, 0x0650),
+        MFP_ADDR(GPIO74, 0x066c),
+        MFP_ADDR(GPIO75, 0x064c),
+        MFP_ADDR(GPIO76, 0x0670),
+        MFP_ADDR(GPIO77, 0x0678),
+        MFP_ADDR(GPIO78, 0x067c),
+        MFP_ADDR(GPIO79, 0x0694),
+        MFP_ADDR(GPIO80, 0x069c),
+        MFP_ADDR(GPIO81, 0x06a0),
+        MFP_ADDR(GPIO82, 0x06a4),
+        MFP_ADDR(GPIO83, 0x0698),
+        MFP_ADDR(GPIO84, 0x06bc),
+        MFP_ADDR(GPIO85, 0x06b4),
+        MFP_ADDR(GPIO86, 0x06b0),
+        MFP_ADDR(GPIO87, 0x06c0),
+        MFP_ADDR(GPIO88, 0x06c4),
+        MFP_ADDR(GPIO89, 0x06ac),
+        MFP_ADDR(GPIO90, 0x0680),
+        MFP_ADDR(GPIO91, 0x0684),
+        MFP_ADDR(GPIO92, 0x0688),
+        MFP_ADDR(GPIO93, 0x0690),
+        MFP_ADDR(GPIO94, 0x068c),
+        MFP_ADDR(GPIO95, 0x06a8),
+        MFP_ADDR(GPIO96, 0x06b8),
+        MFP_ADDR(GPIO97, 0x0410),
+        MFP_ADDR(GPIO98, 0x0418),
+        MFP_ADDR(GPIO99, 0x041c),
+        MFP_ADDR(GPIO100, 0x0414),
+        MFP_ADDR(GPIO101, 0x0408),
+        MFP_ADDR(GPIO102, 0x0324),
+        MFP_ADDR(GPIO103, 0x040c),
+        MFP_ADDR(GPIO104, 0x0400),
+        MFP_ADDR(GPIO105, 0x0328),
+        MFP_ADDR(GPIO106, 0x0404),
+
+        MFP_ADDR(nXCVREN, 0x0204),
+        MFP_ADDR(DF_CLE_nOE, 0x020c),
+        MFP_ADDR(DF_nADV1_ALE, 0x0218),
+        MFP_ADDR(DF_SCLK_E, 0x0214),
+        MFP_ADDR(DF_SCLK_S, 0x0210),
+        MFP_ADDR(nBE0, 0x021c),
+        MFP_ADDR(nBE1, 0x0220),
+        MFP_ADDR(DF_nADV2_ALE, 0x0224),
+        MFP_ADDR(DF_INT_RnB, 0x0228),
+        MFP_ADDR(DF_nCS0, 0x022c),
+        MFP_ADDR(DF_nCS1, 0x0230),
+        MFP_ADDR(nLUA, 0x0254),
+        MFP_ADDR(nLLA, 0x0258),
+        MFP_ADDR(DF_nWE, 0x0234),
+        MFP_ADDR(DF_nRE_nOE, 0x0238),
+        MFP_ADDR(DF_ADDR0, 0x024c),
+        MFP_ADDR(DF_ADDR1, 0x0250),
+        MFP_ADDR(DF_ADDR2, 0x025c),
+        MFP_ADDR(DF_ADDR3, 0x0260),
+        MFP_ADDR(DF_IO0, 0x023c),
+        MFP_ADDR(DF_IO1, 0x0240),
+        MFP_ADDR(DF_IO2, 0x0244),
+        MFP_ADDR(DF_IO3, 0x0248),
+        MFP_ADDR(DF_IO4, 0x0264),
+        MFP_ADDR(DF_IO5, 0x0268),
+        MFP_ADDR(DF_IO6, 0x026c),
+        MFP_ADDR(DF_IO7, 0x0270),
+        MFP_ADDR(DF_IO8, 0x0274),
+        MFP_ADDR(DF_IO9, 0x0278),
+        MFP_ADDR(DF_IO10, 0x027c),
+        MFP_ADDR(DF_IO11, 0x0280),
+        MFP_ADDR(DF_IO12, 0x0284),
+        MFP_ADDR(DF_IO13, 0x0288),
+        MFP_ADDR(DF_IO14, 0x028c),
+        MFP_ADDR(DF_IO15, 0x0290),
+
+        MFP_ADDR(GSIM_UIO, 0x0314),
+        MFP_ADDR(GSIM_UCLK, 0x0318),
+        MFP_ADDR(GSIM_UDET, 0x031c),
+        MFP_ADDR(GSIM_nURST, 0x0320),
+
+        MFP_ADDR(PMIC_INT, 0x06c8),
+
+        MFP_ADDR(RDY, 0x0200),
+
+        MFP_ADDR_END,
+};
+
+static int __init pxa930_init(void)
+{
+        if (cpu_is_pxa930()) {
+                pxa3xx_init_mfp();
+                pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+        }
+
+        return 0;
+}
+
+core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 000000000000..9d39dea57ce2
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,96 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/io.h>
+#include <asm/proc-fns.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio)
+{
+        int rc;
+
+        rc = gpio_request(gpio, "reset generator");
+        if (rc) {
+                printk(KERN_ERR "Can't request reset_gpio\n");
+                goto out;
+        }
+
+        rc = gpio_direction_input(gpio);
+        if (rc) {
+                printk(KERN_ERR "Can't configure reset_gpio for input\n");
+                gpio_free(gpio);
+                goto out;
+        }
+
+out:
+        if (!rc)
+                reset_gpio = gpio;
+
+        return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+        BUG_ON(reset_gpio == -1);
+
+        /* drive it low */
+        gpio_direction_output(reset_gpio, 0);
+        mdelay(2);
+        /* rising edge or drive high */
+        gpio_set_value(reset_gpio, 1);
+        mdelay(2);
+        /* falling edge */
+        gpio_set_value(reset_gpio, 0);
+
+        /* give it some time */
+        mdelay(10);
+
+        WARN_ON(1);
+        /* fallback */
+        do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+        /* Initialize the watchdog and let it fire */
+        OWER = OWER_WME;
+        OSSR = OSSR_M3;
+        OSMR3 = OSCR + 368640;  /* ... in 100 ms */
+}
+
+void arch_reset(char mode)
+{
+        if (cpu_is_pxa2xx())
+                RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+        switch (mode) {
+        case 's':
+                /* Jump into ROM at address 0 */
+                cpu_reset(0);
+                break;
+        case 'h':
+                do_hw_reset();
+                break;
+        case 'g':
+                do_gpio_reset();
+                break;
+        }
+}
+
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
new file mode 100644
index 000000000000..d02bc6f8bb93
--- /dev/null
+++ b/arch/arm/mach-pxa/saar.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/saar.c
+ *
+ *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* SAAR MFP configurations */
+static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+        /* Ethernet */
+        DF_nCS1_nCS3,
+        GPIO97_GPIO,
+};
+
+#define SAAR_ETH_PHYS   (0x14000000)
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = (SAAR_ETH_PHYS + 0x300),
+                .end    = (SAAR_ETH_PHYS + 0xfffff),
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+                .end    = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+        }
+};
+
+static struct smc91x_platdata saar_smc91x_info = {
+        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &saar_smc91x_info,
+        },
+};
+
+static void __init saar_init(void)
+{
+        /* initialize MFP configurations */
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+
+        platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
+        /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+        .phys_io        = 0x40000000,
+        .boot_params    = 0xa0000100,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = saar_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 34cd585075b0..23e9b9283301 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void)
         if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
                 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
         }
-        else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+        else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
         if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
                 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
         }
-        else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+        else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
         if (sharpsl_pm.machinfo->gpio_fatal) {
                 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
                         dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
                 }
-                else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+                else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
         }
 
         if (sharpsl_pm.machinfo->batfull_irq)
@@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void)
                 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
                         dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
                 }
-                else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+                else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
         }
 }
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index e7d0fcd9b43f..762249c03ded 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -38,6 +38,7 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
@@ -450,6 +451,7 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode)
                 set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
         else
                 reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
@@ -459,6 +461,7 @@ static void akita_irda_transceiver_mode(struct device *dev, int mode)
                 akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
         else
                 akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
@@ -529,11 +532,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-        pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
-        GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
-
-        mdelay(1000);
-        arm_machine_restart('h');
+        arm_machine_restart('g');
 }
 
 static void spitz_restart(char mode)
@@ -547,6 +546,7 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
+        init_gpio_reset(SPITZ_GPIO_ON_RESET);
         pm_power_off = spitz_poweroff;
         arm_pm_restart = spitz_restart;
 
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 0bb31982fb6f..89f38683787e 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -14,13 +14,6 @@
  *  IO-based SSP applications and allows easy port setup for DMA access.
  *
  *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- *
- *  Revision history:
- *   22nd Aug 2003 Initial version.
- *   20th Dec 2004 Added ssp_config for changing port config without
- *                 closing the port.
- *    4th Aug 2005 Added option to disable irq handler registration and
- *                 cleaned up irq and clock detection.
  */
 
 #include <linux/module.h>
@@ -285,7 +278,7 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
                         goto out_region;
                 dev->irq = ssp->irq;
         } else
-                dev->irq = 0;
+                dev->irq = NO_IRQ;
 
         /* turn on SSP port clock */
         clk_enable(ssp->clk);
@@ -306,7 +299,8 @@ void ssp_exit(struct ssp_dev *dev)
         struct ssp_device *ssp = dev->ssp;
 
         ssp_disable(dev);
-        free_irq(dev->irq, dev);
+        if (dev->irq != NO_IRQ)
+                free_irq(dev->irq, dev);
         clk_disable(ssp->clk);
         ssp_free(ssp);
 }
@@ -360,6 +354,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
                 dev_err(&pdev->dev, "failed to allocate memory");
                 return -ENOMEM;
         }
+        ssp->pdev = pdev;
 
         ssp->clk = clk_get(&pdev->dev, "SSPCLK");
         if (IS_ERR(ssp->clk)) {
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644
index 000000000000..ac283507e423
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ *  Support for the Marvell PXA930 Evaluation Board
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+        /* Ethernet */
+        DF_nCS1_nCS3,
+        GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS       (0x14000000)
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = (TAVOREVB_ETH_PHYS + 0x300),
+                .end    = (TAVOREVB_ETH_PHYS + 0xfffff),
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+                .end    = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+        }
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &tavorevb_smc91x_info,
+        },
+};
+
+static void __init tavorevb_init(void)
+{
+        /* initialize MFP configurations */
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+        platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+        /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+        .phys_io        = 0x40000000,
+        .boot_params    = 0xa0000100,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = tavorevb_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 000000000000..7d8505466e54
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,150 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include <asm/arch/tosa_bt.h>
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+        gpio_set_value(data->gpio_reset, 0);
+        gpio_set_value(data->gpio_pwr, 1);
+        gpio_set_value(data->gpio_reset, 1);
+        mdelay(20);
+        gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+        gpio_set_value(data->gpio_reset, 1);
+        mdelay(10);
+        gpio_set_value(data->gpio_pwr, 0);
+        gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+{
+        pr_info("BT_RADIO going: %s\n",
+                        state == RFKILL_STATE_ON ? "on" : "off");
+
+        if (state == RFKILL_STATE_ON) {
+                pr_info("TOSA_BT: going ON\n");
+                tosa_bt_on(data);
+        } else {
+                pr_info("TOSA_BT: going OFF\n");
+                tosa_bt_off(data);
+        }
+        return 0;
+}
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+        int rc;
+        struct rfkill *rfk;
+
+        struct tosa_bt_data *data = dev->dev.platform_data;
+
+        rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+        if (rc)
+                goto err_reset;
+        rc = gpio_direction_output(data->gpio_reset, 0);
+        if (rc)
+                goto err_reset_dir;
+        rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+        if (rc)
+                goto err_pwr;
+        rc = gpio_direction_output(data->gpio_pwr, 0);
+        if (rc)
+                goto err_pwr_dir;
+
+        rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+        if (!rfk) {
+                rc = -ENOMEM;
+                goto err_rfk_alloc;
+        }
+
+        rfk->name = "tosa-bt";
+        rfk->toggle_radio = tosa_bt_toggle_radio;
+        rfk->data = data;
+#ifdef CONFIG_RFKILL_LEDS
+        rfk->led_trigger.name = "tosa-bt";
+#endif
+
+        rc = rfkill_register(rfk);
+        if (rc)
+                goto err_rfkill;
+
+        platform_set_drvdata(dev, rfk);
+
+        return 0;
+
+err_rfkill:
+        if (rfk)
+                rfkill_free(rfk);
+        rfk = NULL;
+err_rfk_alloc:
+        tosa_bt_off(data);
+err_pwr_dir:
+        gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+        gpio_free(data->gpio_reset);
+err_reset:
+        return rc;
+}
+
+static int __devexit tosa_bt_remove(struct platform_device *dev)
+{
+        struct tosa_bt_data *data = dev->dev.platform_data;
+        struct rfkill *rfk = platform_get_drvdata(dev);
+
+        platform_set_drvdata(dev, NULL);
+
+        if (rfk)
+                rfkill_unregister(rfk);
+        rfk = NULL;
+
+        tosa_bt_off(data);
+
+        gpio_free(data->gpio_pwr);
+        gpio_free(data->gpio_reset);
+
+        return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+        .probe = tosa_bt_probe,
+        .remove = __devexit_p(tosa_bt_remove),
+
+        .driver = {
+                .name = "tosa-bt",
+                .owner = THIS_MODULE,
+        },
+};
+
+
+static int __init tosa_bt_init(void)
+{
+        return platform_driver_register(&tosa_bt_driver);
+}
+
+static void __exit tosa_bt_exit(void)
+{
+        platform_driver_unregister(&tosa_bt_driver);
+}
+
+module_init(tosa_bt_init);
+module_exit(tosa_bt_exit);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ab4a9f579913..fea17ce6b55f 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,30 +18,31 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
 #include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/pm.h>
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
+#include <linux/rfkill.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa25x.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/i2c.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
+#include <asm/arch/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/arch/tosa.h>
 
 #include <asm/hardware/scoop.h>
@@ -86,7 +87,7 @@ static unsigned long tosa_pin_config[] = {
         GPIO6_MMC_CLK,
         GPIO8_MMC_CS0,
         GPIO9_GPIO, /* Detect */
-        // GPIO10 nSD_INT
+        GPIO10_GPIO, /* nSD_INT */
 
         /* CF */
         GPIO13_GPIO, /* CD_IRQ */
@@ -124,34 +125,34 @@ static unsigned long tosa_pin_config[] = {
         GPIO44_BTUART_CTS,
         GPIO45_BTUART_RTS,
 
-        /* IrDA */
-        GPIO46_STUART_RXD,
-        GPIO47_STUART_TXD,
-
         /* Keybd */
-        GPIO58_GPIO,
-        GPIO59_GPIO,
-        GPIO60_GPIO,
-        GPIO61_GPIO,
-        GPIO62_GPIO,
-        GPIO63_GPIO,
-        GPIO64_GPIO,
-        GPIO65_GPIO,
-        GPIO66_GPIO,
-        GPIO67_GPIO,
-        GPIO68_GPIO,
-        GPIO69_GPIO,
-        GPIO70_GPIO,
-        GPIO71_GPIO,
-        GPIO72_GPIO,
-        GPIO73_GPIO,
-        GPIO74_GPIO,
-        GPIO75_GPIO,
+        GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
 
         /* SPI */
         GPIO81_SSP2_CLK_OUT,
         GPIO82_SSP2_FRM_OUT,
         GPIO83_SSP2_TXD,
+
+        /* IrDA is managed in other way */
+        GPIO46_GPIO,
+        GPIO47_GPIO,
 };
 
 /*
@@ -249,6 +250,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 
         tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
+        err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
+        if (err) {
+                printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
+                goto err_gpio_detect;
+        }
+        err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
+        if (err)
+                goto err_gpio_detect_dir;
+
         err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
                           IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
                                 "MMC/SD card detect", data);
@@ -257,7 +267,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
                 goto err_irq;
         }
 
-        err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+        err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
         if (err) {
                 printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
                 goto err_gpio_wp;
@@ -266,7 +276,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
         if (err)
                 goto err_gpio_wp_dir;
 
-        err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+        err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
         if (err) {
                 printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
                 goto err_gpio_pwr;
@@ -275,8 +285,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
         if (err)
                 goto err_gpio_pwr_dir;
 
+        err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+        if (err) {
+                printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+                goto err_gpio_int;
+        }
+        err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+        if (err)
+                goto err_gpio_int_dir;
+
         return 0;
 
+err_gpio_int_dir:
+        gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
 err_gpio_pwr_dir:
         gpio_free(TOSA_GPIO_PWR_ON);
 err_gpio_pwr:
@@ -285,6 +307,9 @@ err_gpio_wp_dir:
 err_gpio_wp:
         free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
 err_irq:
+err_gpio_detect_dir:
+        gpio_free(TOSA_GPIO_nSD_DETECT);
+err_gpio_detect:
         return err;
 }
 
@@ -306,9 +331,11 @@ static int tosa_mci_get_ro(struct device *dev)
 
 static void tosa_mci_exit(struct device *dev, void *data)
 {
+        gpio_free(TOSA_GPIO_nSD_INT);
         gpio_free(TOSA_GPIO_PWR_ON);
         gpio_free(TOSA_GPIO_SD_WP);
         free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+        gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
@@ -322,29 +349,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
 /*
  * Irda
  */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+        if (mode & IR_OFF) {
+                gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+                pxa2xx_transceiver_mode(dev, mode);
+                gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+        } else {
+                pxa2xx_transceiver_mode(dev, mode);
+                gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+        }
+}
+
 static int tosa_irda_startup(struct device *dev)
 {
         int ret;
 
+        ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+        if (ret)
+                goto err_tx;
+        ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+        if (ret)
+                goto err_tx_dir;
+
         ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
         if (ret)
-                return ret;
+                goto err_pwr;
 
         ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
         if (ret)
-                gpio_free(TOSA_GPIO_IR_POWERDWN);
+                goto err_pwr_dir;
 
-        return ret;
-        }
+        tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
 
-static void tosa_irda_shutdown(struct device *dev)
-{
+        return 0;
+
+err_pwr_dir:
         gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+        gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+        return ret;
 }
 
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static void tosa_irda_shutdown(struct device *dev)
 {
-        gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
+        tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+        gpio_free(TOSA_GPIO_IR_POWERDWN);
+        gpio_free(TOSA_GPIO_IRDA_TX);
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
@@ -355,6 +408,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 };
 
 /*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+        int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+        if (ret)
+                goto err_gpio_req;
+
+        ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+        if (ret)
+                goto err_gpio_in;
+
+        return 0;
+
+err_gpio_in:
+        gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+        return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+        gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+        return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+        "main-battery",
+        "backup-battery",
+        "jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+        .init                   = tosa_power_init,
+        .is_ac_online           = tosa_power_ac_online,
+        .exit                   = tosa_power_exit,
+        .supplied_to            = tosa_ac_supplied_to,
+        .num_supplicants        = ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+        {
+                .name           = "ac",
+                .start          = gpio_to_irq(TOSA_GPIO_AC_IN),
+                .end            = gpio_to_irq(TOSA_GPIO_AC_IN),
+                .flags          = IORESOURCE_IRQ |
+                                  IORESOURCE_IRQ_HIGHEDGE |
+                                  IORESOURCE_IRQ_LOWEDGE,
+        },
+};
+
+static struct platform_device tosa_power_device = {
+        .name                   = "pda-power",
+        .id                     = -1,
+        .dev.platform_data      = &tosa_power_data,
+        .resource               = tosa_power_resource,
+        .num_resources          = ARRAY_SIZE(tosa_power_resource),
+};
+
+/*
  * Tosa Keyboard
  */
 static struct platform_device tosakbd_device = {
@@ -439,7 +556,7 @@ static struct gpio_led tosa_gpio_leds[] = {
         },
         {
                 .name                   = "tosa:blue:bluetooth",
-                .default_trigger        = "none",
+                .default_trigger        = "tosa-bt",
                 .gpio                   = TOSA_GPIO_BT_LED,
         },
 };
@@ -457,21 +574,184 @@ static struct platform_device tosaled_device = {
         },
 };
 
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+        [0] = {
+                .start  = TOSA_LCDC_PHYS,
+                .end    = TOSA_LCDC_PHYS + 0x3ffffff,
+                .flags  = IORESOURCE_MEM,
+        },
+
+        [1] = {
+                .start  = TOSA_IRQ_GPIO_TC6393XB_INT,
+                .end    = TOSA_IRQ_GPIO_TC6393XB_INT,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+        int rc;
+
+        rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+        if (rc)
+                goto err_req_pclr;
+        rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+        if (rc)
+                goto err_req_suspend;
+        rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+        if (rc)
+                goto err_req_l3v;
+        rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+        if (rc)
+                goto err_dir_l3v;
+        rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+        if (rc)
+                goto err_dir_suspend;
+        rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+        if (rc)
+                goto err_dir_pclr;
+
+        mdelay(1);
+
+        gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+        mdelay(10);
+
+        gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+        gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+        return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+        gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+        gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+        gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+        return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+        gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+        gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+        gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+        return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+        gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+        mdelay(10);
+        gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+        mdelay(10);
+
+        return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+        gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+        gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+        return 0;
+}
+
+static struct mtd_partition tosa_nand_partition[] = {
+        {
+                .name   = "smf",
+                .offset = 0,
+                .size   = 7 * 1024 * 1024,
+        },
+        {
+                .name   = "root",
+                .offset = MTDPART_OFS_APPEND,
+                .size   = 28 * 1024 * 1024,
+        },
+        {
+                .name   = "home",
+                .offset = MTDPART_OFS_APPEND,
+                .size   = MTDPART_SIZ_FULL,
+        },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+        .options        = 0,
+        .offs           = 4,
+        .len            = 2,
+        .pattern        = scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+        .num_partitions = ARRAY_SIZE(tosa_nand_partition),
+        .partition      = tosa_nand_partition,
+        .badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+        .scr_pll2cr     = 0x0cc1,
+        .scr_gper       = 0x3300,
+        .scr_gpo_dsr    =
+                TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+        .scr_gpo_doecr  =
+                TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+        .irq_base       = IRQ_BOARD_START,
+        .gpio_base      = TOSA_TC6393XB_GPIO_BASE,
+
+        .enable         = tosa_tc6393xb_enable,
+        .disable        = tosa_tc6393xb_disable,
+        .suspend        = tosa_tc6393xb_suspend,
+        .resume         = tosa_tc6393xb_resume,
+
+        .nand_data      = &tosa_tc6393xb_nand_config,
+};
+
+
+static struct platform_device tc6393xb_device = {
+        .name   = "tc6393xb",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &tosa_tc6393xb_setup,
+        },
+        .num_resources  = ARRAY_SIZE(tc6393xb_resources),
+        .resource       = tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+        .gpio_pwr       = TOSA_GPIO_BT_PWR_EN,
+        .gpio_reset     = TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+        .name   = "tosa-bt",
+        .id     = -1,
+        .dev.platform_data = &tosa_bt_data,
+};
+
+
 static struct platform_device *devices[] __initdata = {
         &tosascoop_device,
         &tosascoop_jc_device,
+        &tc6393xb_device,
+        &tosa_power_device,
         &tosakbd_device,
         &tosa_gpio_keys_device,
         &tosaled_device,
+        &tosa_bt_device,
 };
 
 static void tosa_poweroff(void)
 {
-        gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
-        gpio_set_value(TOSA_GPIO_ON_RESET, 1);
-
-        mdelay(1000);
-        arm_machine_restart('h');
+        arm_machine_restart('g');
 }
 
 static void tosa_restart(char mode)
@@ -485,10 +765,14 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+        int dummy;
+
         pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
         gpio_set_wake(MFP_PIN_GPIO1, 1);
         /* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
+        init_gpio_reset(TOSA_GPIO_ON_RESET);
+
         pm_power_off = tosa_poweroff;
         arm_pm_restart = tosa_restart;
 
@@ -497,6 +781,10 @@ static void __init tosa_init(void)
         /* enable batt_fault */
         PMCR = 0x01;
 
+        dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+        dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+        dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
         pxa_set_mci_info(&tosa_mci_platform_data);
         pxa_set_udc_info(&udc_info);
         pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 61e244023089..12811b7aea07 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = {
         [2] = {
                 .start  = TRIZEPS4_ETH_IRQ,
                 .end    = TRIZEPS4_ETH_IRQ,
-                .flags  = (IORESOURCE_IRQ | IRQT_RISING),
+                .flags  = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
         },
 };
 
@@ -254,6 +254,7 @@ static void board_irda_mode(struct device *dev, int mode)
                 /* Fast mode */
                 trizeps_conxs_ircr |= ConXS_IRCR_MODE;
         }
+        pxa2xx_transceiver_mode(dev, mode);
         if (mode & IR_OFF) {
                 trizeps_conxs_ircr |= ConXS_IRCR_SD;
         } else {
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 66b446ca273d..8fca6d890b7d 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -29,6 +30,7 @@
 #include <asm/arch/zylonite.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -37,6 +39,8 @@
 struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
 
 int gpio_eth_irq;
+int gpio_debug_led1;
+int gpio_debug_led2;
 
 int wm9713_irq;
 
@@ -56,13 +60,57 @@ static struct resource smc91x_resources[] = {
         }
 };
 
+static struct smc91x_platdata zylonite_smc91x_info = {
+        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+                  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &zylonite_smc91x_info,
+        },
+};
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led zylonite_debug_leds[] = {
+        [0] = {
+                .name                   = "zylonite:yellow:1",
+                .default_trigger        = "heartbeat",
+        },
+        [1] = {
+                .name                   = "zylonite:yellow:2",
+                .default_trigger        = "default-on",
+        },
 };
 
+static struct gpio_led_platform_data zylonite_debug_leds_info = {
+        .leds           = zylonite_debug_leds,
+        .num_leds       = ARRAY_SIZE(zylonite_debug_leds),
+};
+
+static struct platform_device zylonite_device_leds = {
+        .name           = "leds-gpio",
+        .id             = -1,
+        .dev            = {
+                .platform_data = &zylonite_debug_leds_info,
+        }
+};
+
+static void __init zylonite_init_leds(void)
+{
+        zylonite_debug_leds[0].gpio = gpio_debug_led1;
+        zylonite_debug_leds[1].gpio = gpio_debug_led2;
+
+        platform_device_register(&zylonite_device_leds);
+}
+#else
+static inline void zylonite_init_leds(void) {}
+#endif
+
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct platform_pwm_backlight_data zylonite_backlight_data = {
         .pwm_id         = 3,
@@ -259,7 +307,7 @@ static void __init zylonite_init_mmc(void)
 static inline void zylonite_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int zylonite_matrix_key_map[] = {
         /* KEY(row, col, key_code) */
         KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
@@ -324,6 +372,57 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition zylonite_nand_partitions[] = {
+        [0] = {
+                .name        = "Bootloader",
+                .offset      = 0,
+                .size        = 0x060000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [1] = {
+                .name        = "Kernel",
+                .offset      = 0x060000,
+                .size        = 0x200000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [2] = {
+                .name        = "Filesystem",
+                .offset      = 0x0260000,
+                .size        = 0x3000000,     /* 48M - rootfs */
+        },
+        [3] = {
+                .name        = "MassStorage",
+                .offset      = 0x3260000,
+                .size        = 0x3d40000,
+        },
+        [4] = {
+                .name        = "BBT",
+                .offset      = 0x6FA0000,
+                .size        = 0x80000,
+                .mask_flags  = MTD_WRITEABLE,  /* force read-only */
+        },
+        /* NOTE: we reserve some blocks at the end of the NAND flash for
+         * bad block management, and the max number of relocation blocks
+         * differs on different platforms. Please take care with it when
+         * defining the partition table.
+         */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+        .enable_arbiter = 1,
+        .parts          = zylonite_nand_partitions,
+        .nr_parts       = ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+        pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init zylonite_init(void)
 {
         /* board-processor specific initialization */
@@ -342,6 +441,8 @@ static void __init zylonite_init(void)
         zylonite_init_lcd();
         zylonite_init_mmc();
         zylonite_init_keypad();
+        zylonite_init_nand();
+        zylonite_init_leds();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 6f7ae972b8db..b28d46e081d3 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -16,9 +16,12 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
 #include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/i2c.h>
 #include <asm/arch/zylonite.h>
 
 #include "generic.h"
@@ -109,6 +112,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
         GPIO12_MMC2_DAT3,
         GPIO13_MMC2_CLK,
         GPIO14_MMC2_CMD,
+
+        /* Standard I2C */
+        GPIO21_I2C_SCL,
+        GPIO22_I2C_SDA,
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -192,6 +199,39 @@ static void __init zylonite_detect_lcd_panel(void)
                 pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
 }
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static struct pca953x_platform_data gpio_exp[] = {
+        [0] = {
+                .gpio_base      = 128,
+        },
+        [1] = {
+                .gpio_base      = 144,
+        },
+};
+
+struct i2c_board_info zylonite_i2c_board_info[] = {
+        {
+                .type           = "pca9539",
+                .addr           = 0x74,
+                .platform_data  = &gpio_exp[0],
+                .irq            = IRQ_GPIO(18),
+        }, {
+                .type           = "pca9539",
+                .addr           = 0x75,
+                .platform_data  = &gpio_exp[1],
+                .irq            = IRQ_GPIO(19),
+        },
+};
+
+static void __init zylonite_init_i2c(void)
+{
+        pxa_set_i2c_info(NULL);
+        i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
+}
+#else
+static inline void zylonite_init_i2c(void) {}
+#endif
+
 void __init zylonite_pxa300_init(void)
 {
         if (cpu_is_pxa300() || cpu_is_pxa310()) {
@@ -207,6 +247,8 @@ void __init zylonite_pxa300_init(void)
 
                 /* WM9713 IRQ */
                 wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+                zylonite_init_i2c();
         }
 
         if (cpu_is_pxa300()) {
@@ -222,4 +264,8 @@ void __init zylonite_pxa300_init(void)
                 zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
                 zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
         }
+
+        /* GPIOs for Debug LEDs */
+        gpio_debug_led1 = EXT_GPIO(25);
+        gpio_debug_led2 = EXT_GPIO(26);
 }
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 2b4fc34919ac..2b7fba7a2921 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -116,6 +116,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
         GPIO27_MMC2_DAT3,
         GPIO28_MMC2_CLK,
         GPIO29_MMC2_CMD,
+
+        /* Debug LEDs */
+        GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
+        GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
 };
 
 #define NUM_LCD_DETECT_PINS     7
@@ -189,6 +193,8 @@ void __init zylonite_pxa320_init(void)
 
                 /* GPIO pin assignment */
                 gpio_eth_irq    = mfp_to_gpio(MFP_PIN_GPIO9);
+                gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2);
+                gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2);
 
                 /* MMC card detect & write protect for controller 0 */
                 zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 31afe50d7cd5..56d3ee01baae 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = {
 static void __init cerf_init_irq(void)
 {
         sa1100_init_irq();
-        set_irq_type(CERF_ETH_IRQ, IRQT_RISING);
+        set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
 }
 
 static struct map_desc cerf_io_desc[] __initdata = {
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index fc97fe57ee6f..b5809c51d13f 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -103,7 +103,7 @@ static void clk_gpio27_disable(void)
 }
 
 static struct clk clk_gpio27 = {
-        .name           = "GPIO27_CLK",
+        .name           = "SA1111_CLK",
         .rate           = 3686400,
         .enable         = clk_gpio27_enable,
         .disable        = clk_gpio27_disable,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 8473c37b77d6..b34ff42bbd75 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -834,7 +834,7 @@ static void __init h3800_init_irq(void)
                 set_irq_chip(irq, &h3800_gpio_irqchip);
         }
 #endif
-        set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
+        set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
         set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index fa0403af7eec..c5e438b12ec7 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type)
         else
                 mask = GPIO11_27_MASK(irq);
 
-        if (type == IRQT_PROBE) {
+        if (type == IRQ_TYPE_PROBE) {
                 if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
                         return 0;
-                type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+                type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
         }
 
-        if (type & __IRQT_RISEDGE) {
+        if (type & IRQ_TYPE_EDGE_RISING) {
                 GPIO_IRQ_rising_edge |= mask;
         } else
                 GPIO_IRQ_rising_edge &= ~mask;
-        if (type & __IRQT_FALEDGE) {
+        if (type & IRQ_TYPE_EDGE_FALLING) {
                 GPIO_IRQ_falling_edge |= mask;
         } else
                 GPIO_IRQ_falling_edge &= ~mask;
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 9f1ed1509301..967a48454f6b 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev)
         /*
          * Install handler for GPIO25.
          */
-        set_irq_type(IRQ_GPIO25, IRQT_RISING);
+        set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
         set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);
 
         /*
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index c7bf7e0038f0..69a71f11625e 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -143,7 +143,7 @@ static void __init pleb_map_io(void)
 
         GPDR &= ~GPIO_ETH0_IRQ;
 
-        set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING);
+        set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING);
 }
 
 MACHINE_START(PLEB, "PLEB")
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index f64b92557b11..2e27a8c8372b 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -76,3 +76,5 @@ obj-$(CONFIG_CPU_V7)		+= proc-v7.o
 
 obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)        += cache-l2x0.o
+obj-$(CONFIG_CACHE_XSC3L2)      += cache-xsc3l2.o
+
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
index 1e5602189507..c8c0c4b0f0a3 100644
--- a/arch/arm/mm/discontig.c
+++ b/arch/arm/mm/discontig.c
@@ -21,26 +21,24 @@
  * Our node_data structure for discontiguous memory.
  */
 
-static bootmem_data_t node_bootmem_data[MAX_NUMNODES];
-
 pg_data_t discontig_node_data[MAX_NUMNODES] = {
-  { .bdata = &node_bootmem_data[0] },
-  { .bdata = &node_bootmem_data[1] },
-  { .bdata = &node_bootmem_data[2] },
-  { .bdata = &node_bootmem_data[3] },
+  { .bdata = &bootmem_node_data[0] },
+  { .bdata = &bootmem_node_data[1] },
+  { .bdata = &bootmem_node_data[2] },
+  { .bdata = &bootmem_node_data[3] },
 #if MAX_NUMNODES == 16
-  { .bdata = &node_bootmem_data[4] },
-  { .bdata = &node_bootmem_data[5] },
-  { .bdata = &node_bootmem_data[6] },
-  { .bdata = &node_bootmem_data[7] },
-  { .bdata = &node_bootmem_data[8] },
-  { .bdata = &node_bootmem_data[9] },
-  { .bdata = &node_bootmem_data[10] },
-  { .bdata = &node_bootmem_data[11] },
-  { .bdata = &node_bootmem_data[12] },
-  { .bdata = &node_bootmem_data[13] },
-  { .bdata = &node_bootmem_data[14] },
-  { .bdata = &node_bootmem_data[15] },
+  { .bdata = &bootmem_node_data[4] },
+  { .bdata = &bootmem_node_data[5] },
+  { .bdata = &bootmem_node_data[6] },
+  { .bdata = &bootmem_node_data[7] },
+  { .bdata = &bootmem_node_data[8] },
+  { .bdata = &bootmem_node_data[9] },
+  { .bdata = &bootmem_node_data[10] },
+  { .bdata = &bootmem_node_data[11] },
+  { .bdata = &bootmem_node_data[12] },
+  { .bdata = &bootmem_node_data[13] },
+  { .bdata = &bootmem_node_data[14] },
+  { .bdata = &bootmem_node_data[15] },
 #endif
 };
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index fbfa26058442..a8ec97b4752e 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -37,7 +37,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
         pgd_t *pgd;
         pmd_t *pmd;
         pte_t *pte, entry;
-        int ret = 0;
+        int ret;
 
         pgd = pgd_offset(vma->vm_mm, address);
         if (pgd_none(*pgd))
@@ -55,15 +55,19 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
         entry = *pte;
 
         /*
+         * If this page is present, it's actually being shared.
+         */
+        ret = pte_present(entry);
+
+        /*
          * If this page isn't present, or is already setup to
          * fault (ie, is old), we can safely ignore any issues.
          */
-        if (pte_present(entry) && pte_val(entry) & shared_pte_mask) {
+        if (ret && pte_val(entry) & shared_pte_mask) {
                 flush_cache_page(vma, address, pte_pfn(entry));
                 pte_val(entry) &= ~shared_pte_mask;
                 set_pte_at(vma->vm_mm, address, pte, entry);
                 flush_tlb_page(vma, address);
-                ret = 1;
         }
         pte_unmap(pte);
         return ret;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index b657f1719af0..e6352946dde0 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -284,7 +284,7 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
          */
         arch_adjust_zones(node, zone_size, zhole_size);
 
-        free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
+        free_area_init_node(node, zone_size, start_pfn, zhole_size);
 
         return end_pfn;
 }
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 4a7736717d86..318b268f938e 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type)
         void __iomem *reg = port->base;
 
         switch (type) {
-        case IRQT_RISING:
+        case IRQ_TYPE_EDGE_RISING:
                 edge = GPIO_INT_RISE_EDGE;
                 break;
-        case IRQT_FALLING:
+        case IRQ_TYPE_EDGE_FALLING:
                 edge = GPIO_INT_FALL_EDGE;
                 break;
-        case IRQT_LOW:
+        case IRQ_TYPE_LEVEL_LOW:
                 edge = GPIO_INT_LOW_LEV;
                 break;
-        case IRQT_HIGH:
+        case IRQ_TYPE_LEVEL_HIGH:
                 edge = GPIO_INT_HIGH_LEV;
                 break;
-        default:        /* this includes IRQT_BOTHEDGE */
+        default:        /* this includes IRQ_TYPE_EDGE_BOTH */
                 return -EINVAL;
         }
 
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 7854f19b77cf..5d107520e6b9 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -23,6 +23,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
@@ -182,7 +183,7 @@ void __init omapfb_reserve_sdram(void)
                 return;
 
         bdata = NODE_DATA(0)->bdata;
-        sdram_start = bdata->node_boot_start;
+        sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
         sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
         reserved = 0;
         for (i = 0; ; i++) {
@@ -340,5 +341,3 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 
 
 #endif
-
-
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 1903a3491ee9..63e094342ef6 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
         u32 gpio_bit = 1 << gpio;
 
         MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-                trigger & __IRQT_LOWLVL);
+                trigger & IRQ_TYPE_LEVEL_LOW);
         MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-                trigger & __IRQT_HIGHLVL);
+                trigger & IRQ_TYPE_LEVEL_HIGH);
         MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-                trigger & __IRQT_RISEDGE);
+                trigger & IRQ_TYPE_EDGE_RISING);
         MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-                trigger & __IRQT_FALEDGE);
+                trigger & IRQ_TYPE_EDGE_FALLING);
 
         if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
                 if (trigger != 0)
@@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
         case METHOD_MPUIO:
                 reg += OMAP_MPUIO_GPIO_INT_EDGE;
                 l = __raw_readl(reg);
-                if (trigger & __IRQT_RISEDGE)
+                if (trigger & IRQ_TYPE_EDGE_RISING)
                         l |= 1 << gpio;
-                else if (trigger & __IRQT_FALEDGE)
+                else if (trigger & IRQ_TYPE_EDGE_FALLING)
                         l &= ~(1 << gpio);
                 else
                         goto bad;
@@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
         case METHOD_GPIO_1510:
                 reg += OMAP1510_GPIO_INT_CONTROL;
                 l = __raw_readl(reg);
-                if (trigger & __IRQT_RISEDGE)
+                if (trigger & IRQ_TYPE_EDGE_RISING)
                         l |= 1 << gpio;
-                else if (trigger & __IRQT_FALEDGE)
+                else if (trigger & IRQ_TYPE_EDGE_FALLING)
                         l &= ~(1 << gpio);
                 else
                         goto bad;
@@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
                 gpio &= 0x07;
                 l = __raw_readl(reg);
                 l &= ~(3 << (gpio << 1));
-                if (trigger & __IRQT_RISEDGE)
+                if (trigger & IRQ_TYPE_EDGE_RISING)
                         l |= 2 << (gpio << 1);
-                if (trigger & __IRQT_FALEDGE)
+                if (trigger & IRQ_TYPE_EDGE_FALLING)
                         l |= 1 << (gpio << 1);
                 if (trigger)
                         /* Enable wake-up during idle for dynamic tick */
@@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
         case METHOD_GPIO_730:
                 reg += OMAP730_GPIO_INT_CONTROL;
                 l = __raw_readl(reg);
-                if (trigger & __IRQT_RISEDGE)
+                if (trigger & IRQ_TYPE_EDGE_RISING)
                         l |= 1 << gpio;
-                else if (trigger & __IRQT_FALEDGE)
+                else if (trigger & IRQ_TYPE_EDGE_FALLING)
                         l &= ~(1 << gpio);
                 else
                         goto bad;
@@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
         _set_gpio_direction(bank, get_gpio_index(gpio), 1);
         _set_gpio_irqenable(bank, gpio, 0);
         _clear_gpio_irqstatus(bank, gpio);
-        _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+        _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
@@ -924,7 +924,7 @@ int omap_request_gpio(int gpio)
         /* Set trigger to none. You need to enable the desired trigger with
          * request_irq() or set_irq_type().
          */
-        _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+        _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 
 #ifdef CONFIG_ARCH_OMAP15XX
         if (bank->method == METHOD_GPIO_1510) {
@@ -1488,6 +1488,9 @@ static int __init _omap_gpio_init(void)
                 bank->chip.set = gpio_set;
                 if (bank_is_mpuio(bank)) {
                         bank->chip.label = "mpuio";
+#ifdef CONFIG_ARCH_OMAP1
+                        bank->chip.dev = &omap_mpuio_device.dev;
+#endif
                         bank->chip.base = OMAP_MPUIO(0);
                 } else {
                         bank->chip.label = "gpio";
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 6f33f58bca45..ff1413eae0b8 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -334,7 +334,7 @@ static int omap_mbox_init(struct omap_mbox *mbox)
         }
 
         mbox->dev.class = &omap_mbox_class;
-        strlcpy(mbox->dev.bus_id, mbox->name, KOBJ_NAME_LEN);
+        dev_set_name(&mbox->dev, "%s", mbox->name);
         dev_set_drvdata(&mbox->dev, mbox);
 
         ret = device_register(&mbox->dev);
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5e28c217b8c2..0af3872fb763 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,7 +9,7 @@ config PLAT_S3C24XX
         depends on ARCH_S3C2410
         default y if ARCH_S3C2410
         select NO_IOPORT
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         help
           Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 60f162dc4fad..8c5e656d5d8c 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1304,7 +1304,7 @@ struct sysdev_class dma_sysclass = {
 
 /* kmem cache implementation */
 
-static void s3c2410_dma_cache_ctor(struct kmem_cache *c, void *p)
+static void s3c2410_dma_cache_ctor(void *p)
 {
         memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index ae2c5d7efc9d..001436c04b13 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
         /* Set the external interrupt to pointed trigger type */
         switch (type)
         {
-                case IRQT_NOEDGE:
+                case IRQ_TYPE_NONE:
                         printk(KERN_WARNING "No edge setting!\n");
                         break;
 
-                case IRQT_RISING:
+                case IRQ_TYPE_EDGE_RISING:
                         newvalue = S3C2410_EXTINT_RISEEDGE;
                         break;
 
-                case IRQT_FALLING:
+                case IRQ_TYPE_EDGE_FALLING:
                         newvalue = S3C2410_EXTINT_FALLEDGE;
                         break;
 
-                case IRQT_BOTHEDGE:
+                case IRQ_TYPE_EDGE_BOTH:
                         newvalue = S3C2410_EXTINT_BOTHEDGE;
                         break;
 
-                case IRQT_LOW:
+                case IRQ_TYPE_LEVEL_LOW:
                         newvalue = S3C2410_EXTINT_LOWLEV;
                         break;
 
-                case IRQT_HIGH:
+                case IRQ_TYPE_LEVEL_HIGH:
                         newvalue = S3C2410_EXTINT_HILEV;
                         break;
 
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 0be5630ff568..8b8f564c3aa2 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jul 7 16:25:39 2008
+# Last update: Sun Jul 13 12:04:05 2008
 #
 # machine_is_xxx        CONFIG_xxxx             MACH_TYPE_xxx           number
 #
@@ -1812,3 +1812,11 @@ jade			MACH_JADE		JADE			1821
 ks8695_softplc          MACH_KS8695_SOFTPLC     KS8695_SOFTPLC          1822
 gprisc4                 MACH_GPRISC4            GPRISC4                 1823
 stamp9260               MACH_STAMP9260          STAMP9260               1824
+smdk6430                MACH_SMDK6430           SMDK6430                1825
+smdkc100                MACH_SMDKC100           SMDKC100                1826
+tavorevb                MACH_TAVOREVB           TAVOREVB                1827
+saar                    MACH_SAAR               SAAR                    1828
+deister_eyecam          MACH_DEISTER_EYECAM     DEISTER_EYECAM          1829
+at91sam9m10ek           MACH_AT91SAM9M10EK      AT91SAM9M10EK           1830
+linkstation_produo      MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO      1831
+hit_b0                  MACH_HIT_B0             HIT_B0                  1832
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 45d63c986015..7c239a916275 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,6 +10,7 @@ config AVR32
         # With EMBEDDED=n, we get lots of stuff automatically selected
         # that we usually don't need on AVR32.
         select EMBEDDED
+        select HAVE_CLK
         select HAVE_OPROFILE
         select HAVE_KPROBES
         help
@@ -87,7 +88,7 @@ config PLATFORM_AT32AP
         select SUBARCH_AVR32B
         select MMU
         select PERFORMANCE_COUNTERS
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         select GENERIC_ALLOCATOR
 
 #
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index af90b00100fd..8dc48214f0b7 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
         bool "ATSTK1004"
         select CPU_AT32AP7002
 
+config BOARD_ATSTK1006
+        bool "ATSTK1006"
+        select CPU_AT32AP7000
+
 endchoice
 
 
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
index beead86462e8..edecee03742d 100644
--- a/arch/avr32/boards/atstk1000/Makefile
+++ b/arch/avr32/boards/atstk1000/Makefile
@@ -2,3 +2,4 @@ obj-y				+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATSTK1002)   += atstk1002.o
 obj-$(CONFIG_BOARD_ATSTK1003)   += atstk1003.o
 obj-$(CONFIG_BOARD_ATSTK1004)   += atstk1004.o
+obj-$(CONFIG_BOARD_ATSTK1006)   += atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index e11659b732fa..8538ba75ef92 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -1,7 +1,7 @@
 /*
- * ATSTK1002 daughterboard-specific init code
+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
  *
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2007 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -21,6 +21,8 @@
 
 #include <asm/io.h>
 #include <asm/setup.h>
+#include <asm/atmel-mci.h>
+
 #include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
@@ -35,6 +37,74 @@ unsigned long at32_board_osc_rates[3] = {
         [2] = 12000000, /* 12 MHz on osc1 */
 };
 
+/*
+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
+ * have the AT32AP7000 chip on board; the difference is that the
+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
+ * none.)
+ *
+ * The RAM difference is handled by the boot loader, so the only
+ * difference we end up handling here is the NAND flash.
+ */
+#ifdef CONFIG_BOARD_ATSTK1006
+#include <linux/mtd/partitions.h>
+#include <asm/arch/smc.h>
+
+static struct smc_timing nand_timing __initdata = {
+        .ncs_read_setup         = 0,
+        .nrd_setup              = 10,
+        .ncs_write_setup        = 0,
+        .nwe_setup              = 10,
+
+        .ncs_read_pulse         = 30,
+        .nrd_pulse              = 15,
+        .ncs_write_pulse        = 30,
+        .nwe_pulse              = 15,
+
+        .read_cycle             = 30,
+        .write_cycle            = 30,
+
+        .ncs_read_recover       = 0,
+        .nrd_recover            = 15,
+        .ncs_write_recover      = 0,
+        /* WE# high -> RE# low min 60 ns */
+        .nwe_recover            = 50,
+};
+
+static struct smc_config nand_config __initdata = {
+        .bus_width              = 1,
+        .nrd_controlled         = 1,
+        .nwe_controlled         = 1,
+        .nwait_mode             = 0,
+        .byte_write             = 0,
+        .tdf_cycles             = 2,
+        .tdf_mode               = 0,
+};
+
+static struct mtd_partition nand_partitions[] = {
+        {
+                .name           = "main",
+                .offset         = 0x00000000,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
+{
+        *num_partitions = ARRAY_SIZE(nand_partitions);
+        return nand_partitions;
+}
+
+struct atmel_nand_data atstk1006_nand_data __initdata = {
+        .cle            = 21,
+        .ale            = 22,
+        .rdy_pin        = GPIO_PIN_PB(30),
+        .enable_pin     = GPIO_PIN_PB(29),
+        .partition_info = nand_part_info,
+};
+#endif
+
 struct eth_addr {
         u8 addr[6];
 };
@@ -192,6 +262,21 @@ void __init setup_board(void)
         at32_setup_serial_console(0);
 }
 
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+
+/* MMC card detect requires MACB0 *NOT* be used */
+#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+        .detect_pin     = GPIO_PIN_PC(14),      /* gpio30/sdcd */
+        .wp_pin         = GPIO_PIN_PC(15),      /* gpio31/sdwp */
+};
+#define MCI_PDATA       &mci0_data
+#else
+#define MCI_PDATA       NULL
+#endif  /* SW6 for sd{cd,wp} routing */
+
+#endif  /* SW2 for MMC signal routing */
+
 static int __init atstk1002_init(void)
 {
         /*
@@ -218,6 +303,12 @@ static int __init atstk1002_init(void)
 
         at32_add_system_devices();
 
+#ifdef CONFIG_BOARD_ATSTK1006
+        smc_set_timing(&nand_config, &nand_timing);
+        smc_set_configuration(3, &nand_config);
+        at32_add_device_nand(0, &atstk1006_nand_data);
+#endif
+
 #ifdef  CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
         at32_add_device_usart(1);
 #else
@@ -235,7 +326,7 @@ static int __init atstk1002_init(void)
         at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-        at32_add_device_mci(0, NULL);
+        at32_add_device_mci(0, MCI_PDATA);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
         set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index ea109f435a83..591fc73b554a 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -154,7 +154,7 @@ static int __init atstk1003_init(void)
         at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-        at32_add_device_mci(0);
+        at32_add_device_mci(0, NULL);
 #endif
         at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index c7236df74d74..d9c5e0a21256 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -137,7 +137,7 @@ static int __init atstk1004_init(void)
         at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-        at32_add_device_mci(0);
+        at32_add_device_mci(0, NULL);
 #endif
         at32_add_device_lcdc(0, &atstk1000_lcdc_data,
                              fbmem_start, fbmem_size, 0);
diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
index b8409caeb23d..e84faffbbeca 100644
--- a/arch/avr32/kernel/cpu.c
+++ b/arch/avr32/kernel/cpu.c
@@ -26,14 +26,16 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
  * XXX: If/when a SMP-capable implementation of AVR32 will ever be
  * made, we must make sure that the code executes on the correct CPU.
  */
-static ssize_t show_pc0event(struct sys_device *dev, char *buf)
+static ssize_t show_pc0event(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         unsigned long pccr;
 
         pccr = sysreg_read(PCCR);
         return sprintf(buf, "0x%lx\n", (pccr >> 12) & 0x3f);
 }
-static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
+static ssize_t store_pc0event(struct sys_device *dev,
+                        struct sysdev_attribute *attr, const char *buf,
                               size_t count)
 {
         unsigned long val;
@@ -46,15 +48,17 @@ static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
         sysreg_write(PCCR, val);
         return count;
 }
-static ssize_t show_pc0count(struct sys_device *dev, char *buf)
+static ssize_t show_pc0count(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         unsigned long pcnt0;
 
         pcnt0 = sysreg_read(PCNT0);
         return sprintf(buf, "%lu\n", pcnt0);
 }
-static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
-                              size_t count)
+static ssize_t store_pc0count(struct sys_device *dev,
+                                struct sysdev_attribute *attr,
+                                const char *buf, size_t count)
 {
         unsigned long val;
         char *endp;
@@ -67,14 +71,16 @@ static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
         return count;
 }
 
-static ssize_t show_pc1event(struct sys_device *dev, char *buf)
+static ssize_t show_pc1event(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         unsigned long pccr;
 
         pccr = sysreg_read(PCCR);
         return sprintf(buf, "0x%lx\n", (pccr >> 18) & 0x3f);
 }
-static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
+static ssize_t store_pc1event(struct sys_device *dev,
+                              struct sysdev_attribute *attr, const char *buf,
                               size_t count)
 {
         unsigned long val;
@@ -87,14 +93,16 @@ static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
         sysreg_write(PCCR, val);
         return count;
 }
-static ssize_t show_pc1count(struct sys_device *dev, char *buf)
+static ssize_t show_pc1count(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         unsigned long pcnt1;
 
         pcnt1 = sysreg_read(PCNT1);
         return sprintf(buf, "%lu\n", pcnt1);
 }
-static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
+static ssize_t store_pc1count(struct sys_device *dev,
+                                struct sysdev_attribute *attr, const char *buf,
                               size_t count)
 {
         unsigned long val;
@@ -108,14 +116,16 @@ static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
         return count;
 }
 
-static ssize_t show_pccycles(struct sys_device *dev, char *buf)
+static ssize_t show_pccycles(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         unsigned long pccnt;
 
         pccnt = sysreg_read(PCCNT);
         return sprintf(buf, "%lu\n", pccnt);
 }
-static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
+static ssize_t store_pccycles(struct sys_device *dev,
+                                struct sysdev_attribute *attr, const char *buf,
                               size_t count)
 {
         unsigned long val;
@@ -129,14 +139,16 @@ static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
         return count;
 }
 
-static ssize_t show_pcenable(struct sys_device *dev, char *buf)
+static ssize_t show_pcenable(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         unsigned long pccr;
 
         pccr = sysreg_read(PCCR);
         return sprintf(buf, "%c\n", (pccr & 1)?'1':'0');
 }
-static ssize_t store_pcenable(struct sys_device *dev, const char *buf,
+static ssize_t store_pcenable(struct sys_device *dev,
+                              struct sysdev_attribute *attr, const char *buf,
                               size_t count)
 {
         unsigned long pccr, val;
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 6cf9df176274..ff820a9e743a 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -31,7 +31,7 @@ void cpu_idle(void)
 {
         /* endless idle loop with no priority at all */
         while (1) {
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 while (!need_resched())
                         cpu_idle_sleep();
                 tick_nohz_restart_sched_tick();
diff --git a/arch/avr32/kernel/stacktrace.c b/arch/avr32/kernel/stacktrace.c
index f4bdb448049c..c09f0d8dd679 100644
--- a/arch/avr32/kernel/stacktrace.c
+++ b/arch/avr32/kernel/stacktrace.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 
 register unsigned long current_frame_pointer asm("r7");
 
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index abd954fb7ba0..7e7f32771ae1 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -43,6 +43,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
         struct clock_event_device *evdev = dev_id;
 
+        if (unlikely(!(intc_get_pending(0) & 1)))
+                return IRQ_NONE;
+
         /*
          * Disable the interrupt until the clockevent subsystem
          * reprograms it.
@@ -55,7 +58,8 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction timer_irqaction = {
         .handler        = timer_interrupt,
-        .flags          = IRQF_TIMER | IRQF_DISABLED,
+        /* Oprofile uses the same irq as the timer, so allow it to be shared */
+        .flags          = IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED,
         .name           = "avr32_comparator",
 };
 
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 021d51217184..1617048c86c5 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -7,10 +7,12 @@
  */
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dw_dmac.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
 
@@ -594,6 +596,17 @@ static void __init genclk_init_parent(struct clk *clk)
         clk->parent = parent;
 }
 
+static struct dw_dma_platform_data dw_dmac0_data = {
+        .nr_channels    = 3,
+};
+
+static struct resource dw_dmac0_resource[] = {
+        PBMEM(0xff200000),
+        IRQ(2),
+};
+DEFINE_DEV_DATA(dw_dmac, 0);
+DEV_CLK(hclk, dw_dmac0, hsb, 10);
+
 /* --------------------------------------------------------------------
  *  System peripherals
  * -------------------------------------------------------------------- */
@@ -708,17 +721,6 @@ static struct clk pico_clk = {
         .users          = 1,
 };
 
-static struct resource dmaca0_resource[] = {
-        {
-                .start  = 0xff200000,
-                .end    = 0xff20ffff,
-                .flags  = IORESOURCE_MEM,
-        },
-        IRQ(2),
-};
-DEFINE_DEV(dmaca, 0);
-DEV_CLK(hclk, dmaca0, hsb, 10);
-
 /* --------------------------------------------------------------------
  * HMATRIX
  * -------------------------------------------------------------------- */
@@ -831,7 +833,7 @@ void __init at32_add_system_devices(void)
         platform_device_register(&at32_eic0_device);
         platform_device_register(&smc0_device);
         platform_device_register(&pdc_device);
-        platform_device_register(&dmaca0_device);
+        platform_device_register(&dw_dmac0_device);
 
         platform_device_register(&at32_tcb0_device);
         platform_device_register(&at32_tcb1_device);
@@ -1284,7 +1286,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
         struct mci_platform_data        _data;
         struct platform_device          *pdev;
-        struct dw_dma_slave             *dws;
 
         if (id != 0)
                 return NULL;
@@ -1299,7 +1300,9 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 
         if (!data) {
                 data = &_data;
-                memset(data, 0, sizeof(struct mci_platform_data));
+                memset(data, -1, sizeof(struct mci_platform_data));
+                data->detect_pin = GPIO_PIN_NONE;
+                data->wp_pin = GPIO_PIN_NONE;
         }
 
         if (platform_device_add_data(pdev, data,
@@ -1313,12 +1316,10 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
         select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
         select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
 
-        if (data) {
-                if (data->detect_pin != GPIO_PIN_NONE)
-                        at32_select_gpio(data->detect_pin, 0);
-                if (data->wp_pin != GPIO_PIN_NONE)
-                        at32_select_gpio(data->wp_pin, 0);
-        }
+        if (gpio_is_valid(data->detect_pin))
+                at32_select_gpio(data->detect_pin, 0);
+        if (gpio_is_valid(data->wp_pin))
+                at32_select_gpio(data->wp_pin, 0);
 
         atmel_mci0_pclk.dev = &pdev->dev;
 
@@ -1852,11 +1853,11 @@ at32_add_device_cf(unsigned int id, unsigned int extint,
         if (at32_init_ide_or_cf(pdev, data->cs, extint))
                 goto fail;
 
-        if (data->detect_pin != GPIO_PIN_NONE)
+        if (gpio_is_valid(data->detect_pin))
                 at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-        if (data->reset_pin != GPIO_PIN_NONE)
+        if (gpio_is_valid(data->reset_pin))
                 at32_select_gpio(data->reset_pin, 0);
-        if (data->vcc_pin != GPIO_PIN_NONE)
+        if (gpio_is_valid(data->vcc_pin))
                 at32_select_gpio(data->vcc_pin, 0);
         /* READY is used as extint, so we can't select it as gpio */
 
@@ -1870,6 +1871,58 @@ fail:
 #endif
 
 /* --------------------------------------------------------------------
+ * NAND Flash / SmartMedia
+ * -------------------------------------------------------------------- */
+static struct resource smc_cs3_resource[] __initdata = {
+        {
+                .start  = 0x0c000000,
+                .end    = 0x0fffffff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = 0xfff03c00,
+                .end    = 0xfff03fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device *__init
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
+{
+        struct platform_device *pdev;
+
+        if (id != 0 || !data)
+                return NULL;
+
+        pdev = platform_device_alloc("atmel_nand", id);
+        if (!pdev)
+                goto fail;
+
+        if (platform_device_add_resources(pdev, smc_cs3_resource,
+                                ARRAY_SIZE(smc_cs3_resource)))
+                goto fail;
+
+        if (platform_device_add_data(pdev, data,
+                                sizeof(struct atmel_nand_data)))
+                goto fail;
+
+        set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
+        if (data->enable_pin)
+                at32_select_gpio(data->enable_pin,
+                                AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+        if (data->rdy_pin)
+                at32_select_gpio(data->rdy_pin, 0);
+        if (data->det_pin)
+                at32_select_gpio(data->det_pin, 0);
+
+        platform_device_add(pdev);
+        return pdev;
+
+fail:
+        platform_device_put(pdev);
+        return NULL;
+}
+
+/* --------------------------------------------------------------------
  * AC97C
  * -------------------------------------------------------------------- */
 static struct resource atmel_ac97c0_resource[] __initdata = {
@@ -1884,9 +1937,11 @@ static struct clk atmel_ac97c0_pclk = {
         .index          = 10,
 };
 
-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+struct platform_device *__init
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
 {
         struct platform_device *pdev;
+        struct ac97c_platform_data _data;
 
         if (id != 0)
                 return NULL;
@@ -1897,19 +1952,37 @@ struct platform_device *__init at32_add_device_ac97c(unsigned int id)
 
         if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
                                 ARRAY_SIZE(atmel_ac97c0_resource)))
-                goto err_add_resources;
+                goto fail;
+
+        if (!data) {
+                data = &_data;
+                memset(data, 0, sizeof(struct ac97c_platform_data));
+                data->reset_pin = GPIO_PIN_NONE;
+        }
 
-        select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
-        select_peripheral(PB(21), PERIPH_B, 0); /* SDO  */
-        select_peripheral(PB(22), PERIPH_B, 0); /* SDI  */
-        select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
+        data->dma_rx_periph_id = 3;
+        data->dma_tx_periph_id = 4;
+        data->dma_controller_id = 0;
+
+        if (platform_device_add_data(pdev, data,
+                                sizeof(struct ac97c_platform_data)))
+                goto fail;
+
+        select_peripheral(PB(20), PERIPH_B, 0); /* SDO  */
+        select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */
+        select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */
+        select_peripheral(PB(23), PERIPH_B, 0); /* SDI  */
+
+        /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
+        if (data->reset_pin != GPIO_PIN_NONE)
+                at32_select_gpio(data->reset_pin, 0);
 
         atmel_ac97c0_pclk.dev = &pdev->dev;
 
         platform_device_add(pdev);
         return pdev;
 
-err_add_resources:
+fail:
         platform_device_put(pdev);
         return NULL;
 }
@@ -2032,7 +2105,7 @@ struct clk *at32_clock_list[] = {
         &smc0_mck,
         &pdc_hclk,
         &pdc_pclk,
-        &dmaca0_hclk,
+        &dw_dmac0_hclk,
         &pico_clk,
         &pio0_mck,
         &pio1_mck,
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index fa427ed42787..b2d9bc61a35c 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
 {
         return platform_driver_register(&hsmc_driver);
 }
-arch_initcall(hsmc_init);
+core_initcall(hsmc_init);
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 60da03ba7117..296294f8ed81 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -360,6 +360,8 @@ static int __init pio_probe(struct platform_device *pdev)
         pio->chip.label = pio->name;
         pio->chip.base = pdev->id * 32;
         pio->chip.ngpio = 32;
+        pio->chip.dev = &pdev->dev;
+        pio->chip.owner = THIS_MODULE;
 
         pio->chip.direction_input = direction_input;
         pio->chip.get = gpio_get;
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 3f90a87527bb..fa92ff6d95f7 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -38,45 +38,6 @@ EXPORT_SYMBOL(empty_zero_page);
  */
 unsigned long mmu_context_cache = NO_CONTEXT;
 
-void show_mem(void)
-{
-        int total = 0, reserved = 0, cached = 0;
-        int slab = 0, free = 0, shared = 0;
-        pg_data_t *pgdat;
-
-        printk("Mem-info:\n");
-        show_free_areas();
-
-        for_each_online_pgdat(pgdat) {
-                struct page *page, *end;
-
-                page = pgdat->node_mem_map;
-                end = page + pgdat->node_spanned_pages;
-
-                do {
-                        total++;
-                        if (PageReserved(page))
-                                reserved++;
-                        else if (PageSwapCache(page))
-                                cached++;
-                        else if (PageSlab(page))
-                                slab++;
-                        else if (!page_count(page))
-                                free++;
-                        else
-                                shared += page_count(page) - 1;
-                        page++;
-                } while (page < end);
-        }
-
-        printk ("%d pages of RAM\n", total);
-        printk ("%d free pages\n", free);
-        printk ("%d reserved pages\n", reserved);
-        printk ("%d slab pages\n", slab);
-        printk ("%d pages shared\n", shared);
-        printk ("%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  *
@@ -119,8 +80,7 @@ void __init paging_init(void)
                 unsigned long zones_size[MAX_NR_ZONES];
                 unsigned long low, start_pfn;
 
-                start_pfn = pgdat->bdata->node_boot_start;
-                start_pfn >>= PAGE_SHIFT;
+                start_pfn = pgdat->bdata->node_min_pfn;
                 low = pgdat->bdata->node_low_pfn;
 
                 memset(zones_size, 0, sizeof(zones_size));
@@ -129,7 +89,7 @@ void __init paging_init(void)
                 printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
                        nid, start_pfn, low);
 
-                free_area_init_node(nid, pgdat, zones_size, start_pfn, NULL);
+                free_area_init_node(nid, zones_size, start_pfn, NULL);
 
                 printk("Node %u: mem_map starts at %p\n",
                        pgdat->node_id, pgdat->node_mem_map);
diff --git a/arch/avr32/mm/ioremap.c b/arch/avr32/mm/ioremap.c
index 3437c82434ac..f03b79f0e0ab 100644
--- a/arch/avr32/mm/ioremap.c
+++ b/arch/avr32/mm/ioremap.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/vmalloc.h>
+#include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/io.h>
 
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b87634e75f20..5a097c46bc46 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -234,7 +234,7 @@ config MEM_MT48LC16M16A2TG_75
         bool
         depends on (BFIN533_EZKIT || BFIN561_EZKIT \
                 || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
-                || H8606_HVSISTEMAS)
+                || H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
         default y
 
 config MEM_MT48LC32M8A2_75
@@ -310,25 +310,6 @@ config BFIN_KERNEL_CLOCK
           are also not changed, and the Bootloader does 100% of the hardware
           configuration.
 
-config MEM_SIZE
-        int "SDRAM Memory Size in MBytes"
-        depends on BFIN_KERNEL_CLOCK
-        default 64
-
-config MEM_ADD_WIDTH
-        int "Memory Address Width"
-        depends on BFIN_KERNEL_CLOCK
-        depends on (!BF54x)
-        range 8 11
-        default  9 if BFIN533_EZKIT
-        default  9 if BFIN561_EZKIT
-        default  9 if H8606_HVSISTEMAS
-        default 10 if BFIN527_EZKIT
-        default 10 if BFIN537_STAMP
-        default 11 if BFIN533_STAMP
-        default 10 if PNAV10
-        default 10 if BFIN532_IP0X
-
 config PLL_BYPASS
         bool "Bypass PLL"
         depends on BFIN_KERNEL_CLOCK
@@ -349,8 +330,7 @@ config VCO_MULT
         default "45" if BFIN533_STAMP
         default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
         default "22" if BFIN533_BLUETECHNIX_CM
-        default "20" if BFIN537_BLUETECHNIX_CM
-        default "20" if BFIN561_BLUETECHNIX_CM
+        default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
         default "20" if BFIN561_EZKIT
         default "16" if H8606_HVSISTEMAS
         help
@@ -390,7 +370,7 @@ config SCLK_DIV
 
 config MAX_MEM_SIZE
         int "Max SDRAM Memory Size in MBytes"
-        depends on !BFIN_KERNEL_CLOCK && !MPU
+        depends on !MPU
         default 512
         help
           This is the max memory size that the kernel will create CPLB
@@ -748,14 +728,6 @@ config BFIN_WT
 
 endchoice
 
-config L1_MAX_PIECE
-        int "Set the max L1 SRAM pieces"
-        default 16
-        help
-          Set the max memory pieces for the L1 SRAM allocation algorithm.
-          Min value is 16. Max value is 1024.
-
-
 config MPU
         bool "Enable the memory protection unit (EXPERIMENTAL)"
         default n
@@ -873,8 +845,8 @@ config HOTPLUG
           plugged into slots found on all modern laptop computers.  Another
           example, used on modern desktops as well as laptops, is USB.
 
-          Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-          software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+          Enable HOTPLUG and build a modular kernel.  Get agent software
+          (from <http://linux-hotplug.sourceforge.net/>) and install it.
           Then your kernel will automatically call out to a user mode "policy
           agent" (/sbin/hotplug) to load modules and set up software needed
           to use devices as you hotplug them.
@@ -899,7 +871,7 @@ config ARCH_SUSPEND_POSSIBLE
         depends on !SMP
 
 choice
-        prompt "Default Power Saving Mode"
+        prompt "Standby Power Saving Mode"
         depends on PM
         default PM_BFIN_SLEEP_DEEPER
 config  PM_BFIN_SLEEP_DEEPER
@@ -918,6 +890,8 @@ config  PM_BFIN_SLEEP_DEEPER
           normal during Sleep Deeper, due to the reduced SCLK frequency.
           When in the sleep mode, system DMA access to L1 memory is not supported.
 
+          If unsure, select "Sleep Deeper".
+
 config  PM_BFIN_SLEEP
         bool "Sleep"
         help
@@ -925,15 +899,17 @@ config  PM_BFIN_SLEEP
           dissipation by disabling the clock to the processor core (CCLK).
           The PLL and system clock (SCLK), however, continue to operate in
           this mode. Typically an external event or RTC activity will wake
-          up the processor. When in the sleep mode,
-          system DMA access to L1 memory is not supported.
+          up the processor. When in the sleep mode, system DMA access to L1
+          memory is not supported.
+
+          If unsure, select "Sleep Deeper".
 endchoice
 
 config PM_WAKEUP_BY_GPIO
-        bool "Cause Wakeup Event by GPIO"
+        bool "Allow Wakeup from Standby by GPIO"
 
 config PM_WAKEUP_GPIO_NUMBER
-        int "Wakeup GPIO number"
+        int "GPIO number"
         range 0 47
         depends on PM_WAKEUP_BY_GPIO
         default 2 if BFIN537_STAMP
@@ -954,6 +930,58 @@ config  PM_WAKEUP_GPIO_POLAR_EDGE_B
         bool "Both EDGE"
 endchoice
 
+comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
+        depends on PM
+
+config PM_BFIN_WAKE_RTC
+        bool "Allow Wake-Up from RESET and on-chip RTC"
+        depends on PM
+        default n
+        help
+          Enable RTC Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_PH6
+        bool "Allow Wake-Up from on-chip PHY or PH6 GP"
+        depends on PM && (BF52x || BF534 || BF536 || BF537)
+        default n
+        help
+          Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_CAN
+        bool "Allow Wake-Up from on-chip CAN0/1"
+        depends on PM && (BF54x || BF534 || BF536 || BF537)
+        default n
+        help
+          Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_GP
+        bool "Allow Wake-Up from GPIOs"
+        depends on PM && BF54x
+        default n
+        help
+          Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_USB
+        bool "Allow Wake-Up from on-chip USB"
+        depends on PM && (BF54x || BF52x)
+        default n
+        help
+          Enable USB Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_KEYPAD
+        bool "Allow Wake-Up from on-chip Keypad"
+        depends on PM && BF54x
+        default n
+        help
+          Enable Keypad Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_ROTARY
+        bool "Allow Wake-Up from on-chip Rotary"
+        depends on PM && BF54x
+        default n
+        help
+          Enable Rotary Wake-Up (Voltage Regulator Power-Up)
+
 endmenu
 
 menu "CPU Frequency scaling"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index c61bdebb9974..c468624d55f0 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -154,13 +154,6 @@ config EARLY_PRINTK
           all of this lives in the init section and is thrown away after the
           kernel boots completely.
 
-config DUAL_CORE_TEST_MODULE
-        tristate "Dual Core Test Module"
-        depends on (BF561)
-        default n
-        help
-          Say Y here to build-in dual core test module for dual core test.
-
 config CPLB_INFO
         bool "Display the CPLB information"
         help
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 3cbe16caad4b..9564731ad3a8 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -6,8 +6,9 @@
 # for more details.
 #
 
-
-CROSS_COMPILE    ?= bfin-uclinux-
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE    := bfin-uclinux-
+endif
 LDFLAGS_vmlinux  := -X
 OBJCOPYFLAGS     := -O binary -R .note -R .comment -S
 GZFLAGS          := -9
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 5e6fb9d8e50f..66854a83c0de 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.24.7
-# Fri May 16 10:02:29 2008
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -290,7 +289,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=y
 CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -430,7 +429,58 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
@@ -689,8 +739,11 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_VT is not set
+CONFIG_SIMPLE_GPIO=m
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -872,8 +925,36 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_BFIN_T350MCQB=y
+# CONFIG_FB_BFIN_7393 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_LTV350QV=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_CORGI is not set
 
 #
 # Display device support
@@ -881,9 +962,99 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_LOGO_BLACKFIN_CLUT224=y
+
+#
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SPI devices
+#
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BLACKFIN_AD1836_TDM is not set
+# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
+# CONFIG_SND_BLACKFIN_AD1836_MULSUB is not set
+# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
+CONFIG_SND_BF5XX_SOC_I2S=m
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+CONFIG_SND_BF5XX_SOC_SSM2602=m
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SSM2602=m
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+CONFIG_SND_SOC_AD1980=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 8d817ba01945..6bc11db12690 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_BFIN533_EZKIT=y
 # CONFIG_BFIN533_STAMP is not set
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
 # CONFIG_GENERIC_BF533_BOARD is not set
 
 #
@@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=27000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -208,13 +201,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -250,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -293,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -321,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -367,6 +364,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -393,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -428,6 +422,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+# CONFIG_BFIN_SIR is not set
 
 #
 # Dongle support
@@ -457,6 +452,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -465,14 +461,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -492,6 +485,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -548,20 +542,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -571,10 +553,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -582,32 +562,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -624,15 +601,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -647,7 +616,6 @@ CONFIG_INPUT=m
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -672,13 +640,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -706,28 +673,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
@@ -748,22 +698,37 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -780,72 +745,27 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -862,10 +782,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -875,8 +791,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -885,22 +803,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -945,7 +850,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -971,10 +875,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -983,10 +889,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1006,17 +909,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1057,21 +955,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1079,6 +972,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1098,11 +992,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1113,6 +1003,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 20d598d17bd1..d77d991a1f61 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC64M4A2FB_7E=y
 # CONFIG_BFIN533_EZKIT is not set
 CONFIG_BFIN533_STAMP=y
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
 # CONFIG_GENERIC_BF533_BOARD is not set
 
 #
@@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=11059200
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -208,14 +201,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=11
-CONFIG_ENET_FLASH_PIN=0
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -251,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -294,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -322,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -368,6 +364,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -394,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -429,6 +422,9 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
 
 #
 # Dongle support
@@ -458,6 +454,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -466,14 +463,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -493,6 +487,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -524,11 +519,7 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
+CONFIG_MTD_BFIN_ASYNC=m
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -555,20 +546,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -578,10 +557,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -589,32 +566,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -631,15 +605,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -654,7 +620,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -667,14 +632,8 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 
 #
 # Hardware I/O ports
@@ -687,15 +646,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -723,28 +680,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
@@ -764,6 +704,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 
 #
@@ -771,14 +712,15 @@ CONFIG_I2C_ALGOBIT=m
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -801,14 +743,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -816,12 +755,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -836,13 +775,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -852,6 +794,20 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -863,24 +819,20 @@ CONFIG_HWMON=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -895,7 +847,7 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_BFIN_7171=m
+# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -905,9 +857,14 @@ CONFIG_NTSC=y
 # CONFIG_PAL_YCBCR is not set
 CONFIG_ADV7393_1XMEM=y
 # CONFIG_ADV7393_2XMEM is not set
-# CONFIG_FB_BFIN_T350MCQB is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 
 #
@@ -941,6 +898,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
+# SPI devices
+#
+
+#
 # ALSA Blackfin devices
 #
 CONFIG_SND_BLACKFIN_AD1836=m
@@ -953,69 +914,43 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_AD73311=m
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73311_SE=4
+CONFIG_SND_BFIN_AD73322=m
+CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
+CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
+CONFIG_SND_BFIN_AD73322_RESET=12
 
 #
 # System on Chip audio support
 #
-# CONFIG_SND_SOC is not set
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
 
 #
-# Open Sound System
+# SoC Audio support for SuperH
 #
-# CONFIG_SOUND_PRIME is not set
+CONFIG_SND_SOC_AD1980=m
 
 #
-# HID Devices
+# Open Sound System
 #
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1035,6 +970,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1042,6 +978,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1053,8 +990,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1063,22 +1002,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1123,7 +1049,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1149,10 +1074,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1161,10 +1088,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1184,17 +1108,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1235,21 +1154,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1257,6 +1171,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1276,11 +1191,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1291,6 +1202,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index b5189c8ba263..5fd7c4b143df 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,7 +132,6 @@ CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC32M8A2_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
@@ -197,12 +187,14 @@ CONFIG_IRQ_PROG_INTA=12
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -216,13 +208,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -258,12 +254,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -301,17 +299,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -329,7 +323,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -375,6 +371,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -401,10 +398,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -436,6 +429,10 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR1=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
 
 #
 # Dongle support
@@ -465,6 +462,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -473,14 +471,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -500,6 +495,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -572,20 +568,8 @@ CONFIG_MTD_NAND_IDS=m
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -595,10 +579,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -606,22 +588,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -635,21 +613,24 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
+# CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -666,15 +647,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -689,7 +662,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -702,14 +674,8 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 
 #
 # Hardware I/O ports
@@ -722,15 +688,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -766,28 +730,11 @@ CONFIG_CAN4LINUX=y
 # CONFIG_CAN_MCF5282 is not set
 # CONFIG_CAN_UNCTWINCAN is not set
 CONFIG_CAN_BLACKFIN=m
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
@@ -809,6 +756,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 
 #
@@ -816,14 +764,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 CONFIG_SENSORS_AD5252=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -846,14 +795,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -861,12 +807,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -881,13 +827,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -897,6 +846,20 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -913,21 +876,15 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_LCD_CLASS_DEVICE=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -942,7 +899,8 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_BFIN_7171=m
+# CONFIG_FB_HITACHI_TX09 is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -956,10 +914,18 @@ CONFIG_FB_BF537_LQ035=m
 CONFIG_LQ035_SLAVE_ADDR=0x58
 # CONFIG_FB_BFIN_LANDSCAPE is not set
 # CONFIG_FB_BFIN_BGR is not set
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_HITACHI_TX09 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CORGI=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 
 #
@@ -993,6 +959,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
+# SPI devices
+#
+
+#
 # ALSA Blackfin devices
 #
 CONFIG_SND_BLACKFIN_AD1836=m
@@ -1005,6 +975,10 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_AD73311=m
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73311_SE=4
+CONFIG_SND_BFIN_AD73322=m
+CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
+CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
+CONFIG_SND_BFIN_AD73322_RESET=12
 
 #
 # System on Chip audio support
@@ -1016,9 +990,14 @@ CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=m
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_BF5xx=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
+# SoC Audio support for SuperH
+#
 CONFIG_SND_SOC_AD1980=m
 
 #
@@ -1026,59 +1005,18 @@ CONFIG_SND_SOC_AD1980=m
 #
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_NO_DUMMY_DELAY is not set
+# CONFIG_DUMMY_DELAY_BANK0 is not set
+# CONFIG_DUMMY_DELAY_BANK1 is not set
+# CONFIG_DUMMY_DELAY_BANK2 is not set
+# CONFIG_DUMMY_DELAY_BANK3 is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1098,6 +1036,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1105,6 +1044,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1116,8 +1056,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1126,22 +1068,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1186,7 +1115,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1212,10 +1140,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1224,10 +1154,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1247,17 +1174,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1298,21 +1220,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1320,6 +1237,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1339,11 +1257,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1354,6 +1268,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 1ff2ff4b49aa..390669e8668e 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -365,7 +365,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -468,7 +468,60 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+# CONFIG_BFIN_SIR0 is not set
+# CONFIG_BFIN_SIR2 is not set
+CONFIG_BFIN_SIR3=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
@@ -575,6 +628,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BF5XX=y
 CONFIG_MTD_NAND_BF5XX_HWECC=y
+# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
@@ -766,7 +820,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
+CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
@@ -1071,6 +1125,7 @@ CONFIG_SND_BF5XX_SOC_AC97=y
 CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SPORT_NUM=0
 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
 CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
@@ -1133,7 +1188,7 @@ CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
+CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_LOGLEVEL=0
 
@@ -1312,7 +1367,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index b4a20c890816..976a4d7ba175 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -140,7 +131,6 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_0_5 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BFIN_DUAL_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_SPORT0_ERROR=7
@@ -233,12 +223,14 @@ CONFIG_IRQ_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=30000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -252,13 +244,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -294,12 +290,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -341,17 +339,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -367,9 +361,15 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -405,6 +405,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -431,10 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -466,6 +463,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+# CONFIG_BFIN_SIR is not set
 
 #
 # Dongle support
@@ -495,6 +493,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -503,14 +502,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -530,6 +526,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -590,20 +587,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -613,10 +598,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -624,32 +607,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -666,15 +646,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -689,7 +661,6 @@ CONFIG_INPUT=m
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -714,13 +685,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -748,27 +718,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
@@ -789,22 +743,37 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -821,91 +790,33 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -950,7 +861,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -976,10 +886,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -988,10 +900,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1011,17 +920,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1062,21 +966,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1084,6 +983,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1104,11 +1004,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1119,6 +1015,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
new file mode 100644
index 000000000000..0799aa9bba9d
--- /dev/null
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -0,0 +1,1185 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24.7
+# Fri Jul 18 18:00:41 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+CONFIG_BF527=y
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF52x=y
+CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_BFIN527_EZKIT is not set
+CONFIG_BFIN527_BLUETECHNIX_CM=y
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_IRQ_SPI_ERROR=7
+CONFIG_IRQ_NFC_ERROR=7
+CONFIG_IRQ_HDMA_ERROR=7
+CONFIG_IRQ_HDMA=7
+CONFIG_IRQ_USB_EINT=10
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x5554
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC0
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_PM_BFIN_SLEEP_DEEPER is not set
+# CONFIG_PM_BFIN_SLEEP is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_BLACKFIN_TWI=m
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CPLB_INFO is not set
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 560890fe0d30..09deea44480b 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -291,7 +292,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -617,8 +618,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -778,7 +778,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -866,11 +866,11 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 9f66d2de1007..219fc345a5f5 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -299,7 +300,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -351,7 +352,10 @@ CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -645,8 +649,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -806,7 +809,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -894,12 +897,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 2694d06c5bde..9873d586fc77 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -298,8 +299,8 @@ CONFIG_C_AMBEN_ALL=y
 #
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0xFFC3
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_2=0xFFC2
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -628,8 +629,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -806,7 +806,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -894,12 +894,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 90207251c533..0e3605fdb7b0 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -363,7 +363,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -744,8 +744,8 @@ CONFIG_BFIN_OTP=y
 #
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
-CONFIG_SERIAL_BFIN_PIO=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
 # CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_BFIN_UART1_CTSRTS is not set
@@ -1149,7 +1149,7 @@ CONFIG_RTC_DRV_BFIN=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1332,7 +1332,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index daf00906c1ef..59c7cdbee904 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -35,7 +35,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 CONFIG_FAIR_GROUP_SCHED=y
@@ -341,7 +342,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -631,8 +632,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -756,7 +756,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -830,12 +830,12 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 679c7483ea71..ba0bee90b7e1 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -967,7 +967,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 4384a670a8b8..285d2241df26 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -1066,7 +1066,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 87622ad9df47..bffca7de65d4 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -294,7 +294,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x33B0
 CONFIG_BANK_2=0x33B0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -1080,7 +1080,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 951ea0412576..b1309f878fcd 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -1067,7 +1067,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 6140cd69c782..606adc78aa85 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -18,6 +18,5 @@ endif
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_BFIN_DMA_5XX)           += bfin_dma_5xx.o
-obj-$(CONFIG_DUAL_CORE_TEST_MODULE)  += dualcore_test.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index d54f19085f37..93229b3d6e3e 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -472,6 +472,40 @@ unsigned long get_dma_curr_addr(unsigned int channel)
 }
 EXPORT_SYMBOL(get_dma_curr_addr);
 
+#ifdef CONFIG_PM
+int blackfin_dma_suspend(void)
+{
+        int i;
+
+#ifdef CONFIG_BF561     /* IMDMA channels doesn't have a PERIPHERAL_MAP */
+        for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) {
+#else
+        for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) {
+#endif
+                if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) {
+                        printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
+                        return -EBUSY;
+                }
+
+                dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
+        }
+
+        return 0;
+}
+
+void blackfin_dma_resume(void)
+{
+        int i;
+
+#ifdef CONFIG_BF561     /* IMDMA channels doesn't have a PERIPHERAL_MAP */
+        for (i = 0; i <= CH_MEM_STREAM3_SRC; i++)
+#else
+        for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++)
+#endif
+                dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+}
+#endif
+
 static void *__dma_memcpy(void *dest, const void *src, size_t size)
 {
         int direction;  /* 1 - address decrease, 0 - address increase */
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index b6d89d1644cc..ecbd141e0ef2 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -186,7 +186,10 @@ static struct str_ident {
         char name[RESOURCE_LABEL_SIZE];
 } str_ident[MAX_RESOURCES];
 
-#if defined(CONFIG_PM) && !defined(CONFIG_BF54x)
+#if defined(CONFIG_PM)
+#if defined(CONFIG_BF54x)
+static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
+#else
 static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
 static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -206,7 +209,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INT
 #ifdef BF561_FAMILY
 static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
 #endif
-
+#endif
 #endif /* CONFIG_PM */
 
 #if defined(BF548_FAMILY)
@@ -667,7 +670,7 @@ static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
         return 0;
 }
 
-u32 bfin_pm_setup(void)
+u32 bfin_pm_standby_setup(void)
 {
         u16 bank, mask, i, gpio;
 
@@ -679,7 +682,7 @@ u32 bfin_pm_setup(void)
                 gpio_bankb[bank]->maskb = 0;
 
                 if (mask) {
-#ifdef BF537_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
                         gpio_bank_saved[bank].fer   = *port_fer[bank];
 #endif
                         gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
@@ -715,7 +718,7 @@ u32 bfin_pm_setup(void)
         return 0;
 }
 
-void bfin_pm_restore(void)
+void bfin_pm_standby_restore(void)
 {
         u16 bank, mask, i;
 
@@ -724,7 +727,7 @@ void bfin_pm_restore(void)
                 bank = gpio_bank(i);
 
                 if (mask) {
-#ifdef BF537_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
                         *port_fer[bank]         = gpio_bank_saved[bank].fer;
 #endif
                         gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
@@ -743,8 +746,111 @@ void bfin_pm_restore(void)
         AWA_DUMMY_READ(maskb);
 }
 
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+        int i, bank;
+
+        for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+                bank = gpio_bank(i);
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+                        gpio_bank_saved[bank].fer   = *port_fer[bank];
+#ifdef BF527_FAMILY
+                        gpio_bank_saved[bank].mux   = *port_mux[bank];
+#else
+                        if (bank == 0)
+                                gpio_bank_saved[bank].mux   = bfin_read_PORT_MUX();
+#endif
+#endif
+                        gpio_bank_saved[bank].data  = gpio_bankb[bank]->data;
+                        gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
+                        gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
+                        gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
+                        gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
+                        gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
+                        gpio_bank_saved[bank].maska  = gpio_bankb[bank]->maska;
+        }
+
+        AWA_DUMMY_READ(maska);
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+        int i, bank;
+
+        for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+                        bank = gpio_bank(i);
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#ifdef BF527_FAMILY
+                        *port_mux[bank] = gpio_bank_saved[bank].mux;
+#else
+                        if (bank == 0)
+                                bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
+#endif
+                        *port_fer[bank]         = gpio_bank_saved[bank].fer;
+#endif
+                        gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
+                        gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
+                        gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
+                        gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
+                        gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+
+                        gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
+                                                        | gpio_bank_saved[bank].dir;
+
+                        gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
+        }
+        AWA_DUMMY_READ(maska);
+}
+
+
 #endif
 #else /* BF548_FAMILY */
+#ifdef CONFIG_PM
+
+u32 bfin_pm_standby_setup(void)
+{
+        return 0;
+}
+
+void bfin_pm_standby_restore(void)
+{
+
+}
+
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+        int i, bank;
+
+        for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+                bank = gpio_bank(i);
+
+                        gpio_bank_saved[bank].fer  = gpio_array[bank]->port_fer;
+                        gpio_bank_saved[bank].mux  = gpio_array[bank]->port_mux;
+                        gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
+                        gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
+                        gpio_bank_saved[bank].inen  = gpio_array[bank]->port_inen;
+                        gpio_bank_saved[bank].dir   = gpio_array[bank]->port_dir_set;
+        }
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+        int i, bank;
+
+        for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+                        bank = gpio_bank(i);
+
+                        gpio_array[bank]->port_mux  = gpio_bank_saved[bank].mux;
+                        gpio_array[bank]->port_fer  = gpio_bank_saved[bank].fer;
+                        gpio_array[bank]->port_inen  = gpio_bank_saved[bank].inen;
+                        gpio_array[bank]->port_dir_set   = gpio_bank_saved[bank].dir;
+                        gpio_array[bank]->port_set = gpio_bank_saved[bank].data
+                                                        | gpio_bank_saved[bank].dir;
+        }
+}
+#endif
 
 unsigned short get_gpio_dir(unsigned gpio)
 {
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
index 2788532de72b..ecbabc0a1fed 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
+++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
@@ -125,6 +125,6 @@ ENTRY(__cplb_hdr)
         SP += -12;
         call _panic_cplb_error;
         SP += 12;
-        JUMP _handle_bad_cplb;
+        JUMP.L _handle_bad_cplb;
 
 ENDPROC(__cplb_hdr)
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 6be0c50122e8..224e7cc30bc5 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -26,11 +26,7 @@
 #include <asm/cplb.h>
 #include <asm/cplbinit.h>
 
-#ifdef CONFIG_MAX_MEM_SIZE
-# define CPLB_MEM CONFIG_MAX_MEM_SIZE
-#else
-# define CPLB_MEM CONFIG_MEM_SIZE
-#endif
+#define CPLB_MEM CONFIG_MAX_MEM_SIZE
 
 /*
 * Number of required data CPLB switchtable entries
diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c
deleted file mode 100644
index 0fcba74840b7..000000000000
--- a/arch/blackfin/kernel/dualcore_test.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * File:         arch/blackfin/kernel/dualcore_test.c
- * Based on:
- * Author:
- *
- * Created:
- * Description:  Small test code for CoreB on a BF561
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-static int *testarg = (int *)0xfeb00000;
-
-static int test_init(void)
-{
-        *testarg = 1;
-        printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
-               *testarg, testarg);
-        return 0;
-}
-
-static void test_exit(void)
-{
-        printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg);
-}
-
-module_init(test_init);
-module_exit(test_exit);
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 65f4e67a65c4..31bd9bf3efae 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -64,6 +64,11 @@ ENDPROC(_ret_from_fork)
 
 ENTRY(_sys_fork)
         r0 = -EINVAL;
+#if (ANOMALY_05000371)
+        nop;
+        nop;
+        nop;
+#endif
         rts;
 ENDPROC(_sys_fork)
 
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index a9c15515bfd7..a1f9641a6425 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -203,6 +203,8 @@ struct hw_breakpoint {
 
 int kgdb_arch_init(void)
 {
+        debugger_step = 0;
+
         kgdb_remove_all_hw_break();
         return 0;
 }
@@ -368,6 +370,7 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
         char *ptr;
         int newPC;
         int wp_status;
+        int i;
 
         switch (remcom_in_buffer[0]) {
         case 'c':
@@ -392,7 +395,18 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
                 /* set the trace bit if we're stepping */
                 if (remcom_in_buffer[0] == 's') {
                         linux_regs->syscfg |= 0x1;
-                        debugger_step = 1;
+                        debugger_step = linux_regs->ipend;
+                        debugger_step >>= 6;
+                        for (i = 10; i > 0; i--, debugger_step >>= 1)
+                                if (debugger_step & 1)
+                                        break;
+                        /* i indicate event priority of current stopped instruction
+                         * user space instruction is 0, IVG15 is 1, IVTMR is 10.
+                         * debugger_step > 0 means in single step mode
+                         */
+                        debugger_step = i + 1;
+                } else {
+                        debugger_step = 0;
                 }
 
                 wp_status = bfin_read_WPSTAT();
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 14a42848f37f..e1bebc80a5bf 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -173,7 +173,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
         for (s = sechdrs; s < sechdrs_end; ++s) {
                 if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
                     ((strcmp(".text", secstrings + s->sh_name) == 0) &&
-                     (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
+                     (hdr->e_flags & EF_BFIN_CODE_IN_L1) && (s->sh_size > 0))) {
                         dest = l1_inst_sram_alloc(s->sh_size);
                         mod->arch.text_l1 = dest;
                         if (dest == NULL) {
@@ -188,7 +188,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
                 }
                 if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
                     ((strcmp(".data", secstrings + s->sh_name) == 0) &&
-                     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+                     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
                         dest = l1_data_sram_alloc(s->sh_size);
                         mod->arch.data_a_l1 = dest;
                         if (dest == NULL) {
@@ -203,7 +203,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
                 }
                 if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
                     ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
-                     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+                     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
                         dest = l1_data_sram_alloc(s->sh_size);
                         mod->arch.bss_a_l1 = dest;
                         if (dest == NULL) {
@@ -242,6 +242,51 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
                         s->sh_flags &= ~SHF_ALLOC;
                         s->sh_addr = (unsigned long)dest;
                 }
+                if ((strcmp(".l2.text", secstrings + s->sh_name) == 0) ||
+                    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
+                     (hdr->e_flags & EF_BFIN_CODE_IN_L2) && (s->sh_size > 0))) {
+                        dest = l2_sram_alloc(s->sh_size);
+                        mod->arch.text_l2 = dest;
+                        if (dest == NULL) {
+                                printk(KERN_ERR
+                                       "module %s: L2 SRAM allocation failed\n",
+                                       mod->name);
+                                return -1;
+                        }
+                        memcpy(dest, (void *)s->sh_addr, s->sh_size);
+                        s->sh_flags &= ~SHF_ALLOC;
+                        s->sh_addr = (unsigned long)dest;
+                }
+                if ((strcmp(".l2.data", secstrings + s->sh_name) == 0) ||
+                    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
+                     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+                        dest = l2_sram_alloc(s->sh_size);
+                        mod->arch.data_l2 = dest;
+                        if (dest == NULL) {
+                                printk(KERN_ERR
+                                        "module %s: L2 SRAM allocation failed\n",
+                                        mod->name);
+                                return -1;
+                        }
+                        memcpy(dest, (void *)s->sh_addr, s->sh_size);
+                        s->sh_flags &= ~SHF_ALLOC;
+                        s->sh_addr = (unsigned long)dest;
+                }
+                if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 ||
+                    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
+                     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+                        dest = l2_sram_alloc(s->sh_size);
+                        mod->arch.bss_l2 = dest;
+                        if (dest == NULL) {
+                                printk(KERN_ERR
+                                        "module %s: L2 SRAM allocation failed\n",
+                                        mod->name);
+                                return -1;
+                        }
+                        memset(dest, 0, s->sh_size);
+                        s->sh_flags &= ~SHF_ALLOC;
+                        s->sh_addr = (unsigned long)dest;
+                }
         }
         return 0;
 }
@@ -411,9 +456,10 @@ module_finalize(const Elf_Ehdr * hdr,
                         continue;
 
                 if ((sechdrs[i].sh_type == SHT_RELA) &&
-                    ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
+                    ((strcmp(".rela.l2.text", secstrings + sechdrs[i].sh_name) == 0) ||
+                    (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
                     ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
-                         (hdr->e_flags & FLG_CODE_IN_L1)))) {
+                        (hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) {
                         apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
                                            symindex, i, mod);
                 }
@@ -423,14 +469,12 @@ module_finalize(const Elf_Ehdr * hdr,
 
 void module_arch_cleanup(struct module *mod)
 {
-        if (mod->arch.text_l1)
-                l1_inst_sram_free((void *)mod->arch.text_l1);
-        if (mod->arch.data_a_l1)
-                l1_data_sram_free((void *)mod->arch.data_a_l1);
-        if (mod->arch.bss_a_l1)
-                l1_data_sram_free((void *)mod->arch.bss_a_l1);
-        if (mod->arch.data_b_l1)
-                l1_data_B_sram_free((void *)mod->arch.data_b_l1);
-        if (mod->arch.bss_b_l1)
-                l1_data_B_sram_free((void *)mod->arch.bss_b_l1);
+        l1_inst_sram_free(mod->arch.text_l1);
+        l1_data_A_sram_free(mod->arch.data_a_l1);
+        l1_data_A_sram_free(mod->arch.bss_a_l1);
+        l1_data_B_sram_free(mod->arch.data_b_l1);
+        l1_data_B_sram_free(mod->arch.bss_b_l1);
+        l2_sram_free(mod->arch.text_l2);
+        l2_sram_free(mod->arch.data_l2);
+        l2_sram_free(mod->arch.bss_l2);
 }
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 53c2cd255441..77800dd83e57 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -105,7 +105,7 @@ void cpu_idle(void)
 #endif
                 if (!idle)
                         idle = default_idle;
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 while (!need_resched())
                         idle();
                 tick_nohz_restart_sched_tick();
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index f51ab088098e..bf1a51d8e608 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -220,6 +220,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
                                 copied = sizeof(tmp);
                         } else
 #endif
+#if L1_DATA_A_LENGTH != 0
+                        if (addr + add >= L1_DATA_A_START
+                            && addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+                                memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+                                copied = sizeof(tmp);
+                        } else
+#endif
+#if L1_DATA_B_LENGTH != 0
+                        if (addr + add >= L1_DATA_B_START
+                            && addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+                                memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+                                copied = sizeof(tmp);
+                        } else
+#endif
                         if (addr + add >= FIXED_CODE_START
                             && addr + add + sizeof(tmp) <= FIXED_CODE_END) {
                                 memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
@@ -290,6 +304,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
                                 copied = sizeof(data);
                         } else
 #endif
+#if L1_DATA_A_LENGTH != 0
+                        if (addr + add >= L1_DATA_A_START
+                            && addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+                                memcpy((void *)(addr + add), &data, sizeof(data));
+                                copied = sizeof(data);
+                        } else
+#endif
+#if L1_DATA_B_LENGTH != 0
+                        if (addr + add >= L1_DATA_B_START
+                            && addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+                                memcpy((void *)(addr + add), &data, sizeof(data));
+                                copied = sizeof(data);
+                        } else
+#endif
                         if (addr + add >= FIXED_CODE_START
                             && addr + add + sizeof(data) <= FIXED_CODE_END) {
                                 memcpy((void *)(addr + add), &data, sizeof(data));
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 8efea004aecb..23e637eb78da 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -104,6 +104,7 @@ void __init bf53x_relocate_l1_mem(void)
         unsigned long l1_code_length;
         unsigned long l1_data_a_length;
         unsigned long l1_data_b_length;
+        unsigned long l2_length;
 
         l1_code_length = _etext_l1 - _stext_l1;
         if (l1_code_length > L1_CODE_LENGTH)
@@ -129,6 +130,15 @@ void __init bf53x_relocate_l1_mem(void)
         /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
         dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
                         l1_data_a_length, l1_data_b_length);
+
+#ifdef L2_LENGTH
+        l2_length = _ebss_l2 - _stext_l2;
+        if (l2_length > L2_LENGTH)
+                panic("L2 SRAM Overflow\n");
+
+        /* Copy _stext_l2 to _edata_l2 to L2 SRAM */
+        dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+#endif
 }
 
 /* add_memory_region to memmap */
@@ -664,11 +674,8 @@ static __init void setup_bootmem_allocator(void)
 })
 static inline int __init get_mem_size(void)
 {
-#ifdef CONFIG_MEM_SIZE
-        return CONFIG_MEM_SIZE;
-#else
-# if defined(EBIU_SDBCTL)
-#  if defined(BF561_FAMILY)
+#if defined(EBIU_SDBCTL)
+# if defined(BF561_FAMILY)
         int ret = 0;
         u32 sdbctl = bfin_read_EBIU_SDBCTL();
         ret += EBSZ_TO_MEG(sdbctl >>  0);
@@ -676,10 +683,10 @@ static inline int __init get_mem_size(void)
         ret += EBSZ_TO_MEG(sdbctl >> 16);
         ret += EBSZ_TO_MEG(sdbctl >> 24);
         return ret;
-#  else
+# else
         return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL());
-#  endif
-# elif defined(EBIU_DDRCTL1)
+# endif
+#elif defined(EBIU_DDRCTL1)
         u32 ddrctl = bfin_read_EBIU_DDRCTL1();
         int ret = 0;
         switch (ddrctl & 0xc0000) {
@@ -693,8 +700,9 @@ static inline int __init get_mem_size(void)
                 case DEVWD_8:  ret *= 2;
                 case DEVWD_16: break;
         }
+        if ((ddrctl & 0xc000) == 0x4000)
+                ret *= 2;
         return ret;
-# endif
 #endif
         BUG();
 }
@@ -763,6 +771,9 @@ void __init setup_arch(char **cmdline_p)
 
         _bfin_swrst = bfin_read_SWRST();
 
+        /* If we double fault, reset the system - otherwise we hang forever */
+        bfin_write_SWRST(DOUBLE_FAULT);
+
         if (_bfin_swrst & RESET_DOUBLE)
                 printk(KERN_INFO "Recovering from Double Fault event\n");
         else if (_bfin_swrst & RESET_WDOG)
@@ -842,38 +853,55 @@ static int __init topology_init(void)
 
 subsys_initcall(topology_init);
 
+/* Get the voltage input multiplier */
+static u_long cached_vco_pll_ctl, cached_vco;
 static u_long get_vco(void)
 {
         u_long msel;
-        u_long vco;
 
-        msel = (bfin_read_PLL_CTL() >> 9) & 0x3F;
+        u_long pll_ctl = bfin_read_PLL_CTL();
+        if (pll_ctl == cached_vco_pll_ctl)
+                return cached_vco;
+        else
+                cached_vco_pll_ctl = pll_ctl;
+
+        msel = (pll_ctl >> 9) & 0x3F;
         if (0 == msel)
                 msel = 64;
 
-        vco = CONFIG_CLKIN_HZ;
-        vco >>= (1 & bfin_read_PLL_CTL());      /* DF bit */
-        vco = msel * vco;
-        return vco;
+        cached_vco = CONFIG_CLKIN_HZ;
+        cached_vco >>= (1 & pll_ctl);   /* DF bit */
+        cached_vco *= msel;
+        return cached_vco;
 }
 
 /* Get the Core clock */
+static u_long cached_cclk_pll_div, cached_cclk;
 u_long get_cclk(void)
 {
         u_long csel, ssel;
+
         if (bfin_read_PLL_STAT() & 0x1)
                 return CONFIG_CLKIN_HZ;
 
         ssel = bfin_read_PLL_DIV();
+        if (ssel == cached_cclk_pll_div)
+                return cached_cclk;
+        else
+                cached_cclk_pll_div = ssel;
+
         csel = ((ssel >> 4) & 0x03);
         ssel &= 0xf;
         if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */
-                return get_vco() / ssel;
-        return get_vco() >> csel;
+                cached_cclk = get_vco() / ssel;
+        else
+                cached_cclk = get_vco() >> csel;
+        return cached_cclk;
 }
 EXPORT_SYMBOL(get_cclk);
 
 /* Get the System clock */
+static u_long cached_sclk_pll_div, cached_sclk;
 u_long get_sclk(void)
 {
         u_long ssel;
@@ -881,13 +909,20 @@ u_long get_sclk(void)
         if (bfin_read_PLL_STAT() & 0x1)
                 return CONFIG_CLKIN_HZ;
 
-        ssel = (bfin_read_PLL_DIV() & 0xf);
+        ssel = bfin_read_PLL_DIV();
+        if (ssel == cached_sclk_pll_div)
+                return cached_sclk;
+        else
+                cached_sclk_pll_div = ssel;
+
+        ssel &= 0xf;
         if (0 == ssel) {
                 printk(KERN_WARNING "Invalid System Clock\n");
                 ssel = 1;
         }
 
-        return get_vco() / ssel;
+        cached_sclk = get_vco() / ssel;
+        return cached_sclk;
 }
 EXPORT_SYMBOL(get_sclk);
 
@@ -916,7 +951,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
         uint32_t revid;
 
         u_long cclk = 0, sclk = 0;
-        u_int dcache_size = 0, dsup_banks = 0;
+        u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
 
         cpu = CPU;
         mmu = "none";
@@ -985,12 +1020,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
         }
 
         /* Is it turned on? */
-        if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)))
+        if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
                 dcache_size = 0;
 
+        if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB))
+                icache_size = 0;
+
         seq_printf(m, "cache size\t: %d KB(L1 icache) "
                 "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
-                BFIN_ICACHESIZE / 1024, dcache_size,
+                icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
                 "wb"
 #elif defined CONFIG_BFIN_WT
@@ -1000,8 +1038,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
         seq_printf(m, "%s\n", cache);
 
-        seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
-                   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+        if (icache_size)
+                seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
+                           BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+        else
+                seq_printf(m, "icache setup\t: off\n");
+
         seq_printf(m,
                    "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
                    dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index f061f5181623..ad922ab91543 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -69,8 +69,6 @@ void __init trap_init(void)
 
 unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
 
-int kstack_depth_to_print = 48;
-
 static void decode_address(char *buf, unsigned long address)
 {
         struct vm_list_struct *vml;
@@ -163,6 +161,9 @@ static void decode_address(char *buf, unsigned long address)
                                 if (!in_atomic)
                                         mmput(mm);
 
+                                if (!strlen(buf))
+                                        sprintf(buf, "<0x%p> [ %s ] dynamic memory", (void *)address, name);
+
                                 goto done;
                         }
 
@@ -173,7 +174,7 @@ static void decode_address(char *buf, unsigned long address)
         }
 
         /* we were unable to find this address anywhere */
-        sprintf(buf, "<0x%p> /* unknown address */", (void *)address);
+        sprintf(buf, "<0x%p> /* kernel dynamic memory */", (void *)address);
 
 done:
         write_unlock_irqrestore(&tasklist_lock, flags);
@@ -494,7 +495,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
         BUG_ON(sig == 0);
 
         if (sig != SIGTRAP) {
-                unsigned long stack;
+                unsigned long *stack;
                 dump_bfin_process(fp);
                 dump_bfin_mem(fp);
                 show_regs(fp);
@@ -508,14 +509,23 @@ asmlinkage void trap_c(struct pt_regs *fp)
                 else
 #endif
                         dump_bfin_trace_buffer();
-                show_stack(current, &stack);
+
                 if (oops_in_progress) {
+                        /* Dump the current kernel stack */
+                        printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+                        show_stack(current, NULL);
+
                         print_modules();
 #ifndef CONFIG_ACCESS_CHECK
                         printk(KERN_EMERG "Please turn on "
                                "CONFIG_ACCESS_CHECK\n");
 #endif
                         panic("Kernel exception");
+                } else {
+                        /* Dump the user space stack */
+                        stack = (unsigned long *)rdusp();
+                        printk(KERN_NOTICE "Userspace Stack\n");
+                        show_stack(NULL, stack);
                 }
         }
 
@@ -532,11 +542,71 @@ asmlinkage void trap_c(struct pt_regs *fp)
 
 #define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
 
+/*
+ * Similar to get_user, do some address checking, then dereference
+ * Return true on sucess, false on bad address
+ */
+bool get_instruction(unsigned short *val, unsigned short *address)
+{
+
+        unsigned long addr;
+
+        addr = (unsigned long)address;
+
+        /* Check for odd addresses */
+        if (addr & 0x1)
+                return false;
+
+        /* Check that things do not wrap around */
+        if (addr > (addr + 2))
+                return false;
+
+        /*
+         * Since we are in exception context, we need to do a little address checking
+         * We need to make sure we are only accessing valid memory, and
+         * we don't read something in the async space that can hang forever
+         */
+        if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
+#ifdef L2_START
+            (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
+#endif
+            (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
+#if L1_DATA_A_LENGTH != 0
+            (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) ||
+#endif
+#if L1_DATA_B_LENGTH != 0
+            (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) ||
+#endif
+            (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) ||
+            (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) &&
+               addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) ||
+            (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) &&
+               addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) ||
+            (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) &&
+               addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) ||
+            (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) &&
+              addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) {
+                *val = *address;
+                return true;
+        }
+
+#if L1_CODE_LENGTH != 0
+        if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
+                dma_memcpy(val, address, 2);
+                return true;
+        }
+#endif
+
+
+        return false;
+}
+
 void dump_bfin_trace_buffer(void)
 {
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
         int tflags, i = 0;
         char buf[150];
+        unsigned short val = 0, *addr;
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
         int j, index;
 #endif
@@ -549,8 +619,42 @@ void dump_bfin_trace_buffer(void)
                 for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
                         decode_address(buf, (unsigned long)bfin_read_TBUF());
                         printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-                        decode_address(buf, (unsigned long)bfin_read_TBUF());
-                        printk(KERN_NOTICE "     Source : %s\n", buf);
+                        addr = (unsigned short *)bfin_read_TBUF();
+                        decode_address(buf, (unsigned long)addr);
+                        printk(KERN_NOTICE "     Source : %s ", buf);
+                        if (get_instruction(&val, addr)) {
+                                if (val == 0x0010)
+                                        printk("RTS");
+                                else if (val == 0x0011)
+                                        printk("RTI");
+                                else if (val == 0x0012)
+                                        printk("RTX");
+                                else if (val >= 0x0050 && val <= 0x0057)
+                                        printk("JUMP (P%i)", val & 7);
+                                else if (val >= 0x0060 && val <= 0x0067)
+                                        printk("CALL (P%i)", val & 7);
+                                else if (val >= 0x0070 && val <= 0x0077)
+                                        printk("CALL (PC+P%i)", val & 7);
+                                else if (val >= 0x0080 && val <= 0x0087)
+                                        printk("JUMP (PC+P%i)", val & 7);
+                                else if ((val >= 0x1000 && val <= 0x13FF) ||
+                                    (val >= 0x1800 && val <= 0x1BFF))
+                                        printk("IF !CC JUMP");
+                                else if ((val >= 0x1400 && val <= 0x17ff) ||
+                                    (val >= 0x1c00 && val <= 0x1fff))
+                                        printk("IF CC JUMP");
+                                else if (val >= 0x2000 && val <= 0x2fff)
+                                        printk("JUMP.S");
+                                else if (val >= 0xe080 && val <= 0xe0ff)
+                                        printk("LSETUP");
+                                else if (val >= 0xe200 && val <= 0xe2ff)
+                                        printk("JUMP.L");
+                                else if (val >= 0xe300 && val <= 0xe3ff)
+                                        printk("CALL pcrel");
+                                else
+                                        printk("0x%04x", val);
+                        }
+                        printk("\n");
                 }
         }
 
@@ -582,59 +686,151 @@ void dump_bfin_trace_buffer(void)
 }
 EXPORT_SYMBOL(dump_bfin_trace_buffer);
 
-static void show_trace(struct task_struct *tsk, unsigned long *sp)
+/*
+ * Checks to see if the address pointed to is either a
+ * 16-bit CALL instruction, or a 32-bit CALL instruction
+ */
+bool is_bfin_call(unsigned short *addr)
 {
-        unsigned long addr;
+        unsigned short opcode = 0, *ins_addr;
+        ins_addr = (unsigned short *)addr;
 
-        printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n");
-
-        while (!kstack_end(sp)) {
-                addr = *sp++;
-                /*
-                 * If the address is either in the text segment of the
-                 * kernel, or in the region which contains vmalloc'ed
-                 * memory, it *may* be the address of a calling
-                 * routine; if so, print it so that someone tracing
-                 * down the cause of the crash will be able to figure
-                 * out the call path that was taken.
-                 */
-                if (kernel_text_address(addr))
-                        print_ip_sym(addr);
-        }
+        if (!get_instruction(&opcode, ins_addr))
+                return false;
 
-        printk(KERN_NOTICE "\n");
-}
+        if ((opcode >= 0x0060 && opcode <= 0x0067) ||
+            (opcode >= 0x0070 && opcode <= 0x0077))
+                return true;
+
+        ins_addr--;
+        if (!get_instruction(&opcode, ins_addr))
+                return false;
 
+        if (opcode >= 0xE300 && opcode <= 0xE3FF)
+                return true;
+
+        return false;
+
+}
 void show_stack(struct task_struct *task, unsigned long *stack)
 {
-        unsigned long *endstack, addr;
-        int i;
+        unsigned int *addr, *endstack, *fp = 0, *frame;
+        unsigned short *ins_addr;
+        char buf[150];
+        unsigned int i, j, ret_addr, frame_no = 0;
 
-        /* Cannot call dump_bfin_trace_buffer() here as show_stack() is
-         * called externally in some places in the kernel.
+        /*
+         * If we have been passed a specific stack, use that one otherwise
+         *    if we have been passed a task structure, use that, otherwise
+         *    use the stack of where the variable "stack" exists
          */
 
-        if (!stack) {
-                if (task)
+        if (stack == NULL) {
+                if (task) {
+                        /* We know this is a kernel stack, so this is the start/end */
                         stack = (unsigned long *)task->thread.ksp;
-                else
+                        endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
+                } else {
+                        /* print out the existing stack info */
                         stack = (unsigned long *)&stack;
+                        endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+                }
+        } else
+                endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+
+        decode_address(buf, (unsigned int)stack);
+        printk(KERN_NOTICE "Stack info:\n" KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+        addr = (unsigned int *)((unsigned int)stack & ~0x3F);
+
+        /* First thing is to look for a frame pointer */
+        for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+                addr < endstack; addr++, i++) {
+                if (*addr & 0x1)
+                        continue;
+                ins_addr = (unsigned short *)*addr;
+                ins_addr--;
+                if (is_bfin_call(ins_addr))
+                        fp = addr - 1;
+
+                if (fp) {
+                        /* Let's check to see if it is a frame pointer */
+                        while (fp >= (addr - 1) && fp < endstack && fp)
+                                fp = (unsigned int *)*fp;
+                        if (fp == 0 || fp == endstack) {
+                                fp = addr - 1;
+                                break;
+                        }
+                        fp = 0;
+                }
         }
+        if (fp) {
+                frame = fp;
+                printk(" FP: (0x%p)\n", fp);
+        } else
+                frame = 0;
 
-        addr = (unsigned long)stack;
-        endstack = (unsigned long *)PAGE_ALIGN(addr);
+        /*
+         * Now that we think we know where things are, we
+         * walk the stack again, this time printing things out
+         * incase there is no frame pointer, we still look for
+         * valid return addresses
+         */
 
-        printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack);
-        for (i = 0; i < kstack_depth_to_print; i++) {
-                if (stack + 1 > endstack)
-                        break;
-                if (i % 8 == 0)
-                        printk("\n" KERN_NOTICE "       ");
-                printk(" %08lx", *stack++);
+        /* First time print out data, next time, print out symbols */
+        for (j = 0; j <= 1; j++) {
+                if (j)
+                        printk(KERN_NOTICE "Return addresses in stack:\n");
+                else
+                        printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
+
+                fp = frame;
+                frame_no = 0;
+
+                for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+                     addr <= endstack; addr++, i++) {
+
+                        ret_addr = 0;
+                        if (!j && i % 8 == 0)
+                                printk("\n" KERN_NOTICE "%p:",addr);
+
+                        /* if it is an odd address, or zero, just skip it */
+                        if (*addr & 0x1 || !*addr)
+                                goto print;
+
+                        ins_addr = (unsigned short *)*addr;
+
+                        /* Go back one instruction, and see if it is a CALL */
+                        ins_addr--;
+                        ret_addr = is_bfin_call(ins_addr);
+ print:
+                        if (!j && stack == (unsigned long *)addr)
+                                printk("[%08x]", *addr);
+                        else if (ret_addr)
+                                if (j) {
+                                        decode_address(buf, (unsigned int)*addr);
+                                        if (frame == addr) {
+                                                printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
+                                                continue;
+                                        }
+                                        printk(KERN_NOTICE "    address : %s\n", buf);
+                                } else
+                                        printk("<%08x>", *addr);
+                        else if (fp == addr) {
+                                if (j)
+                                        frame = addr+1;
+                                else
+                                        printk("(%08x)", *addr);
+
+                                fp = (unsigned int *)*addr;
+                                frame_no++;
+
+                        } else if (!j)
+                                printk(" %08x ", *addr);
+                }
+                if (!j)
+                        printk("\n");
         }
-        printk("\n");
 
-        show_trace(task, stack);
 }
 
 void dump_stack(void)
@@ -715,19 +911,9 @@ void dump_bfin_mem(struct pt_regs *fp)
                 if (!((unsigned long)addr & 0xF))
                         printk("\n" KERN_NOTICE "0x%p: ", addr);
 
-                if (get_user(val, addr)) {
-                        if (addr >= (unsigned short *)L1_CODE_START &&
-                            addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) {
-                                dma_memcpy(&val, addr, sizeof(val));
-                                sprintf(buf, "%04x", val);
-                        } else if (addr >= (unsigned short *)FIXED_CODE_START &&
-                                addr <= (unsigned short *)memory_start) {
-                                val = bfin_read16(addr);
-                                sprintf(buf, "%04x", val);
-                        } else {
+                if (get_instruction(&val, addr)) {
                                 val = 0;
                                 sprintf(buf, "????");
-                        }
                 } else
                         sprintf(buf, "%04x", val);
 
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 3ecc64cab3be..0896e38d6108 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -101,6 +101,11 @@ SECTIONS
 #if !L1_DATA_B_LENGTH
                 *(.l1.data.B)
 #endif
+#ifndef L2_LENGTH
+                . = ALIGN(32);
+                *(.data_l2.cacheline_aligned)
+                *(.l2.data)
+#endif
 
                 DATA_DATA
                 *(.data.*)
@@ -182,14 +187,13 @@ SECTIONS
                 *(.l1.data)
                 __edata_l1 = .;
 
-                . = ALIGN(4);
-                __sbss_l1 = .;
-                *(.l1.bss)
-
                 . = ALIGN(32);
                 *(.data_l1.cacheline_aligned)
 
                 . = ALIGN(4);
+                __sbss_l1 = .;
+                *(.l1.bss)
+                . = ALIGN(4);
                 __ebss_l1 = .;
         }
 
@@ -203,11 +207,37 @@ SECTIONS
                 . = ALIGN(4);
                 __sbss_b_l1 = .;
                 *(.l1.bss.B)
-
                 . = ALIGN(4);
                 __ebss_b_l1 = .;
         }
 
+#ifdef L2_LENGTH
+        __l2_lma_start = .;
+
+        .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
+        {
+                . = ALIGN(4);
+                __stext_l2 = .;
+                *(.l1.text)
+                . = ALIGN(4);
+                __etext_l2 = .;
+
+                . = ALIGN(4);
+                __sdata_l2 = .;
+                *(.l1.data)
+                __edata_l2 = .;
+
+                . = ALIGN(32);
+                *(.data_l2.cacheline_aligned)
+
+                . = ALIGN(4);
+                __sbss_l2 = .;
+                *(.l1.bss)
+                . = ALIGN(4);
+                __ebss_l2 = .;
+        }
+#endif
+
         /* Force trailing alignment of our init section so that when we
          * free our init memory, we don't leave behind a partial page.
          */
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
index 6a570ad03746..8bf9e58f0148 100644
--- a/arch/blackfin/mach-bf527/boards/Kconfig
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -9,4 +9,9 @@ config BFIN527_EZKIT
         help
           BF527-EZKIT-LITE board support.
 
+config BFIN527_BLUETECHNIX_CM
+        bool "Bluetechnix CM-BF527"
+        help
+          CM-BF527 support for EVAL- and DEV-Board.
+
 endchoice
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index 7277d35ef111..7ba7d256bbb8 100644
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
new file mode 100644
index 000000000000..0b26ae2de5ee
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -0,0 +1,1011 @@
+/*
+ * File:         arch/blackfin/mach-bf527/boards/cm-bf527.c
+ * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/etherdevice.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/pata_platform.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/sl811.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#include <linux/usb/musb.h>
+#endif
+#include <asm/cplb.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM-BF527";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#define ISP1761_BASE       0x203C0000
+#define ISP1761_IRQ        IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+        [0] = {
+                .name   = "isp1761-regs",
+                .start  = ISP1761_BASE + 0x00000000,
+                .end    = ISP1761_BASE + 0x000fffff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = ISP1761_IRQ,
+                .end    = ISP1761_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_isp1761_device = {
+        .name           = "isp1761",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+        .resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+        &bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+        unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+        printk(KERN_INFO "%s(): registering device resources\n", __func__);
+        set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+        return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+        platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+        [0] = {
+                .start  = 0xffc03800,
+                .end    = 0xffc03cff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = { /* general IRQ */
+                .start  = IRQ_USB_INT0,
+                .end    = IRQ_USB_INT0,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+        [2] = { /* DMA IRQ */
+                .start  = IRQ_USB_DMA,
+                .end    = IRQ_USB_DMA,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+        .mode           = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+        .mode           = MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+        .mode           = MUSB_PERIPHERAL,
+#endif
+        .multipoint     = 0,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+        .name           = "musb_hdrc",
+        .id             = 0,
+        .dev = {
+                .dma_mask               = &musb_dmamask,
+                .coherent_dma_mask      = 0xffffffff,
+                .platform_data          = &musb_plat,
+        },
+        .num_resources  = ARRAY_SIZE(musb_resources),
+        .resource       = musb_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions[] = {
+        {
+                .name       = "Bootloader",
+                .size       = 0x40000,
+                .offset     = 0,
+        }, {
+                .name       = "Kernel",
+                .size       = 0x1C0000,
+                .offset     = MTDPART_OFS_APPEND,
+        }, {
+                .name       = "RootFS",
+                .size       = MTDPART_SIZ_FULL,
+                .offset     = MTDPART_OFS_APPEND,
+        }
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+        .width      = 2,
+        .parts      = ezkit_partitions,
+        .nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+        .start = 0x20000000,
+        .end   = 0x201fffff,
+        .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+        .name          = "physmap-flash",
+        .id            = 0,
+        .dev = {
+                .platform_data = &ezkit_flash_data,
+        },
+        .num_resources = 1,
+        .resource      = &ezkit_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+        {
+                .name = "Linux Kernel",
+                .offset = 0,
+                .size = 4 * SIZE_1M,
+        },
+        {
+                .name = "File System",
+                .offset = MTDPART_OFS_APPEND,
+                .size = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+        .page_size = NFC_PG_SIZE_256,
+        .data_width = NFC_NWIDTH_8,
+        .partitions = partition_info,
+        .nr_partitions = ARRAY_SIZE(partition_info),
+        .rd_dly = 3,
+        .wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+        {
+                .start = NFC_CTL,
+                .end = NFC_DATA_RD + 2,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = CH_NFC,
+                .end = CH_NFC,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bf5xx_nand_device = {
+        .name = "bf5xx-nand",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+        .resource = bf5xx_nand_resources,
+        .dev = {
+                .platform_data = &bf5xx_nand_platform,
+        },
+};
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+        {
+                .start = 0x20310000, /* IO PORT */
+                .end = 0x20312000,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 0x20311000, /* Attribute Memory */
+                .end = 0x20311FFF,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = IRQ_PF4,
+                .end = IRQ_PF4,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+        }, {
+                .start = 6, /* Card Detect PF6 */
+                .end = 6,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+        .name = "bfin_cf_pcmcia",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+        .resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+        .name = "rtc-bfin",
+        .id   = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+        {
+                .name = "smc91x-regs",
+                .start = 0x20300300,
+                .end = 0x20300300 + 16,
+                .flags = IORESOURCE_MEM,
+        }, {
+
+                .start = IRQ_PF7,
+                .end = IRQ_PF7,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+static struct platform_device smc91x_device = {
+        .name = "smc91x",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(smc91x_resources),
+        .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+        [0] = {
+                .start  = 0x203FB800,
+                .end    = 0x203FB800 + 8,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_PF9,
+                .end    = IRQ_PF9,
+                .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+        },
+};
+
+static struct platform_device dm9000_device = {
+        .name           = "dm9000",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(dm9000_resources),
+        .resource       = dm9000_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+        {
+                .start = 0x20340000,
+                .end = 0x20340000,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 0x20340004,
+                .end = 0x20340004,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = CONFIG_USB_SL811_BFIN_IRQ,
+                .end = CONFIG_USB_SL811_BFIN_IRQ,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+        gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+        .potpg = 10,
+        .power = 250,       /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+        .port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+        .name = "sl811-hcd",
+        .id = 0,
+        .dev = {
+                .platform_data = &sl811_priv,
+        },
+        .num_resources = ARRAY_SIZE(sl811_hcd_resources),
+        .resource = sl811_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+        {
+                .start = 0x20360000,
+                .end = 0x20360000,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 0x20360004,
+                .end = 0x20360004,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+                .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+        .sel15Kres = 1,
+        .clknotstop = 0,
+        .oc_enable = 0,
+        .int_act_high = 0,
+        .int_edge_triggered = 0,
+        .remote_wakeup_connected = 0,
+        .no_power_switching = 1,
+        .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+        .name = "isp1362-hcd",
+        .id = 0,
+        .dev = {
+                .platform_data = &isp1362_priv,
+        },
+        .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+        .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+        .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+        {
+                .start = 0x20300000,
+                .end = 0x20300000 + 0x100,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = IRQ_PF7,
+                .end = IRQ_PF7,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct platform_device net2272_bfin_device = {
+        .name = "net2272",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+        .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+        || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+        {
+                .name = "bootloader",
+                .size = 0x00040000,
+                .offset = 0,
+                .mask_flags = MTD_CAP_ROM
+        }, {
+                .name = "linux kernel",
+                .size = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND,
+        }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+        .name = "m25p80",
+        .parts = bfin_spi_flash_partitions,
+        .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+        .type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+        .enable_dma = 0,         /* use dma transfer with this chip*/
+        .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+        || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+        .enable_dma = 1,         /* use dma transfer with this chip*/
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+        || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+        .enable_dma = 1,
+        .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+        .ctl_reg        = 0x4, /* send zero */
+        .enable_dma     = 0,
+        .bits_per_word  = 8,
+        .cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+        .model                  = 7877,
+        .vref_delay_usecs       = 50,   /* internal, no capacitor */
+        .x_plate_ohms           = 419,
+        .y_plate_ohms           = 486,
+        .pressure_max           = 1000,
+        .pressure_min           = 0,
+        .stopacq_polarity       = 1,
+        .first_conversion_delay = 3,
+        .acquisition_time       = 1,
+        .averaging              = 1,
+        .pen_down_acc_interval  = 1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+         && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+        || defined(CONFIG_MTD_M25P80_MODULE)
+        {
+                /* the modalias must be the same as spi device driver name */
+                .modalias = "m25p80", /* Name of spi_driver for this device */
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0, /* Framework bus number */
+                .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+                .platform_data = &bfin_spi_flash_data,
+                .controller_data = &spi_flash_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+        || defined(CONFIG_SPI_ADC_BF533_MODULE)
+        {
+                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0, /* Framework bus number */
+                .chip_select = 1, /* Framework chip select. */
+                .platform_data = NULL, /* No spi_driver specific config */
+                .controller_data = &spi_adc_chip_info,
+        },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+        || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+        {
+                .modalias = "ad1836-spi",
+                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+                .controller_data = &ad1836_spi_chip_info,
+        },
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+        {
+                .modalias = "ad9960-spi",
+                .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 1,
+                .controller_data = &ad9960_spi_chip_info,
+        },
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+        {
+                .modalias = "spi_mmc_dummy",
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 0,
+                .platform_data = NULL,
+                .controller_data = &spi_mmc_chip_info,
+                .mode = SPI_MODE_3,
+        },
+        {
+                .modalias = "spi_mmc",
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+                .platform_data = NULL,
+                .controller_data = &spi_mmc_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+#if defined(CONFIG_PBX)
+        {
+                .modalias = "fxs-spi",
+                .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 8 - CONFIG_J11_JUMPER,
+                .controller_data = &spi_si3xxx_chip_info,
+                .mode = SPI_MODE_3,
+        },
+        {
+                .modalias = "fxo-spi",
+                .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 8 - CONFIG_J19_JUMPER,
+                .controller_data = &spi_si3xxx_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+        {
+                .modalias               = "ad7877",
+                .platform_data          = &bfin_ad7877_ts_info,
+                .irq                    = IRQ_PF8,
+                .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num        = 0,
+                .chip_select  = 2,
+                .controller_data = &spi_ad7877_chip_info,
+        },
+#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+         && defined(CONFIG_SND_SOC_WM8731_SPI)
+        {
+                .modalias       = "wm8731",
+                .max_speed_hz   = 3125000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num        = 0,
+                .chip_select    = 5,
+                .controller_data = &spi_wm8731_chip_info,
+                .mode = SPI_MODE_0,
+        },
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+        {
+                .modalias = "spidev",
+                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 1,
+                .controller_data = &spidev_chip_info,
+        },
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+        .num_chipselect = 8,
+        .enable_dma = 1,  /* master has the ability to do dma transfer */
+        .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+                },
+        [1] = {
+                .start = CH_SPI,
+                .end   = CH_SPI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_spi0_device = {
+        .name = "bfin-spi",
+        .id = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource = bfin_spi0_resource,
+        .dev = {
+                .platform_data = &bfin_spi0_info, /* Passed to driver */
+        },
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+        .name = "bfin-adv7393",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+        {
+                .start = 0xFFC00400,
+                .end = 0xFFC004FF,
+                .flags = IORESOURCE_MEM,
+        },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+        {
+                .start = 0xFFC02000,
+                .end = 0xFFC020FF,
+                .flags = IORESOURCE_MEM,
+        },
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+        .name = "bfin-uart",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(bfin_uart_resources),
+        .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+        {
+                .start = 0xFFC00400,
+                .end = 0xFFC004FF,
+                .flags = IORESOURCE_MEM,
+        },
+#endif
+#ifdef CONFIG_BFIN_SIR1
+        {
+                .start = 0xFFC02000,
+                .end = 0xFFC020FF,
+                .flags = IORESOURCE_MEM,
+        },
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+        .name = "bfin_sir",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_sir_resources),
+        .resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+        [0] = {
+                .start = TWI0_REGBASE,
+                .end   = TWI0_REGBASE,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_TWI,
+                .end   = IRQ_TWI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+        .name = "i2c-bfin-twi",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+        .resource = bfin_twi0_resource,
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+        {
+                I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+                .type = "pcf8574_lcd",
+        },
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+        {
+                I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+                .type = "pcf8574_keypad",
+                .irq = IRQ_PF8,
+        },
+#endif
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+        .name = "bfin-sport-uart",
+        .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+        .name = "bfin-sport-uart",
+        .id = 1,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT        55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+        .ioport_shift = 1,
+        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+        {
+                .start = 0x20314020,
+                .end = 0x2031403F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = 0x2031401C,
+                .end = 0x2031401F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = PATA_INT,
+                .end = PATA_INT,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_pata_device = {
+        .name = "pata_platform",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(bfin_pata_resources),
+        .resource = bfin_pata_resources,
+        .dev = {
+                .platform_data = &bfin_pata_platform_data,
+        }
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+        {BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+        .buttons        = bfin_gpio_keys_table,
+        .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+        .name      = "gpio-keys",
+        .dev = {
+                .platform_data = &bfin_gpio_keys_data,
+        },
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+        .start = 0,
+        .end   = MAX_BLACKFIN_GPIOS - 1,
+        .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+        .name = "simple-gpio",
+        .id = -1,
+        .num_resources = 1,
+        .resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+        VRPAIR(VLEV_100, 400000000),
+        VRPAIR(VLEV_105, 426000000),
+        VRPAIR(VLEV_110, 500000000),
+        VRPAIR(VLEV_115, 533000000),
+        VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+        .tuple_tab = cclk_vlev_datasheet,
+        .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+        .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+        .name = "bfin dpmc",
+        .dev = {
+                .platform_data = &bfin_dmpc_vreg_data,
+        },
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+        &bfin_dpmc,
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+        &bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+        &bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+        &rtc_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+        &sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+        &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+        &musb_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+        &smc91x_device,
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+        &dm9000_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+        &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+        &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+        &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+        &bfin_fb_adv7393_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+        &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+        &bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+        &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+        &bfin_sport0_uart_device,
+        &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        &bfin_pata_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+        &ezkit_flash_device,
+#endif
+
+        &bfin_gpios_device,
+};
+
+static int __init stamp_init(void)
+{
+        printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+        i2c_register_board_info(0, bfin_i2c_board_info,
+                                ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+        return 0;
+}
+
+arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+        /* workaround reboot hang when booting from SPI */
+        if ((bfin_read_SYSCR() & 0x7) == 0x3)
+                bfin_gpio_reset_spi0_ssel1();
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+        random_ether_addr(addr);
+        printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 5958eecefcf1..689b69c98ee4 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -323,10 +323,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
         [0] = {
                 .start  = 0x203FB800,
-                .end    = 0x203FB800 + 8,
+                .end    = 0x203FB800 + 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
+                .start  = 0x203FB800 + 4,
+                .end    = 0x203FB800 + 5,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2] = {
                 .start  = IRQ_PF9,
                 .end    = IRQ_PF9,
                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S
index 57bdb3ba2fed..fe05cc1ef174 100644
--- a/arch/blackfin/mach-bf527/head.S
+++ b/arch/blackfin/mach-bf527/head.S
@@ -32,7 +32,7 @@
 #include <asm/blackfin.h>
 #include <asm/trace.h>
 
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -185,7 +185,7 @@ ENTRY(__start)
 
         /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
         call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
         call _start_dma_code;
 #endif
 
@@ -318,7 +318,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
         /* Enable PHY CLK buffer output */
@@ -398,12 +398,6 @@ ENTRY(_start_dma_code)
         w[p0] = r0.l;
         ssync;
 
-        p0.l = LO(EBIU_SDBCTL);
-        p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-        r0 = mem_SDBCTL;
-        w[p0] = r0.l;
-        ssync;
-
         P2.H = hi(EBIU_SDGCTL);
         P2.L = lo(EBIU_SDGCTL);
         R0 = [P2];
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 7cc4864f6aaf..4103a97c1a70 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -65,10 +65,15 @@ static struct platform_device rtc_device = {
 static struct resource dm9000_resources[] = {
         [0] = {
                 .start  = 0x20300000,
-                .end    = 0x20300000 + 8,
+                .end    = 0x20300000 + 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
+                .start  = 0x20300000 + 4,
+                .end    = 0x20300000 + 5,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2] = {
                 .start  = IRQ_PF10,
                 .end    = IRQ_PF10,
                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 1295deac00a4..c671e8549b17 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -186,7 +186,7 @@ ENTRY(__start)
 
         /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
         call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
         call _start_dma_code;
 #endif
 
@@ -319,7 +319,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
         p0.h = hi(SIC_IWR);
         p0.l = lo(SIC_IWR);
@@ -390,12 +390,6 @@ ENTRY(_start_dma_code)
         w[p0] = r0.l;
         ssync;
 
-        p0.l = LO(EBIU_SDBCTL);
-        p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-        r0 = mem_SDBCTL;
-        w[p0] = r0.l;
-        ssync;
-
         P2.H = hi(EBIU_SDGCTL);
         P2.L = lo(EBIU_SDGCTL);
         R0 = [P2];
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 7d250828dad8..01b63e2ec18f 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -166,10 +166,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
         [0] = {
                 .start  = 0x203FB800,
-                .end    = 0x203FB800 + 8,
+                .end    = 0x203FB800 + 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
+                .start  = 0x203FB800 + 4,
+                .end    = 0x203FB800 + 5,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2] = {
                 .start  = IRQ_PF9,
                 .end    = IRQ_PF9,
                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 671f9d67f23a..6dbc76fb080b 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -29,9 +29,12 @@
  */
 
 #include <linux/device.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -355,6 +358,84 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static struct mtd_partition bfin_plat_nand_partitions[] = {
+        {
+                .name   = "linux kernel",
+                .size   = 0x400000,
+                .offset = 0,
+        }, {
+                .name   = "file system",
+                .size   = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND,
+        },
+};
+#endif
+
+#define BFIN_NAND_PLAT_CLE 2
+#define BFIN_NAND_PLAT_ALE 1
+static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+        struct nand_chip *this = mtd->priv;
+
+        if (cmd == NAND_CMD_NONE)
+                return;
+
+        if (ctrl & NAND_CLE)
+                writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
+        else
+                writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
+}
+
+#define BFIN_NAND_PLAT_READY GPIO_PF3
+static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
+{
+        return gpio_get_value(BFIN_NAND_PLAT_READY);
+}
+
+static struct platform_nand_data bfin_plat_nand_data = {
+        .chip = {
+                .chip_delay = 30,
+#ifdef CONFIG_MTD_PARTITIONS
+                .part_probe_types = part_probes,
+                .partitions = bfin_plat_nand_partitions,
+                .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
+#endif
+        },
+        .ctrl = {
+                .cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
+                .dev_ready = bfin_plat_nand_dev_ready,
+        },
+};
+
+#define MAX(x, y) (x > y ? x : y)
+static struct resource bfin_plat_nand_resources = {
+        .start = 0x20212000,
+        .end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
+        .flags = IORESOURCE_IO,
+};
+
+static struct platform_device bfin_async_nand_device = {
+        .name = "gen_nand",
+        .id = -1,
+        .num_resources = 1,
+        .resource = &bfin_plat_nand_resources,
+        .dev = {
+                .platform_data = &bfin_plat_nand_data,
+        },
+};
+
+static void bfin_plat_nand_init(void)
+{
+        gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
+}
+#else
+static void bfin_plat_nand_init(void) {}
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition stamp_partitions[] = {
         {
@@ -780,7 +861,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT        55
+#define PATA_INT        IRQ_PF5
 
 static struct pata_platform_info bfin_pata_platform_data = {
         .ioport_shift = 1,
@@ -922,6 +1003,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 
         &bfin_gpios_device,
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+        &bfin_async_nand_device,
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
         &stamp_flash_device,
 #endif
@@ -936,6 +1021,7 @@ static int __init stamp_init(void)
                                 ARRAY_SIZE(bfin_i2c_board_info));
 #endif
 
+        bfin_plat_nand_init();
         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 48cd58a410a0..6b019eaee0b6 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -32,7 +32,7 @@
 #include <asm/blackfin.h>
 #include <asm/trace.h>
 
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -217,7 +217,7 @@ ENTRY(__start)
 
         /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
         call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
         call _start_dma_code;
 #endif
 
@@ -350,7 +350,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
         /* Enable PHY CLK buffer output */
@@ -430,12 +430,6 @@ ENTRY(_start_dma_code)
         w[p0] = r0.l;
         ssync;
 
-        p0.l = LO(EBIU_SDBCTL);
-        p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-        r0 = mem_SDBCTL;
-        w[p0] = r0.l;
-        ssync;
-
         P2.H = hi(EBIU_SDGCTL);
         P2.L = lo(EBIU_SDGCTL);
         R0 = [P2];
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index af7c211a580e..166fa2201ee7 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -61,6 +61,49 @@ const char bfin_board_name[] = "ADSP-BF548-EZKIT";
  *  Driver needs to know address, irq and flag pin.
  */
 
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+        [0] = {
+                .name   = "isp1761-regs",
+                .start  = 0x2C0C0000,
+                .end    = 0x2C0C0000 + 0xfffff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_PG7,
+                .end    = IRQ_PG7,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_isp1761_device = {
+        .name           = "isp1761",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+        .resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+        &bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+        unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+        printk(KERN_INFO "%s(): registering device resources\n", __func__);
+        set_irq_type(bfin_isp1761_resources[1].start, IRQF_TRIGGER_FALLING);
+
+        return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+        platform_device_unregister(&bfin_isp1761_device);
+}
+arch_initcall(bfin_isp1761_init);
+#endif
+
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
 #include <asm/mach/bf54x-lq043.h>
@@ -177,6 +220,7 @@ static struct resource bfin_uart_resources[] = {
         {
                 .start = 0xFFC03100,
                 .end = 0xFFC031FF,
+                .flags = IORESOURCE_MEM,
         },
 #endif
 };
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index f7191141a3ce..06b9178cfcfe 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -130,7 +130,7 @@ ENTRY(__start)
 
         /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
         call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
         call _start_dma_code;
 #endif
         /* Code for initializing Async memory banks */
@@ -288,7 +288,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
         /* Enable PHY CLK buffer output */
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 5b8bd40851dd..cf1a2dff01e7 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -377,12 +377,6 @@ ENTRY(_start_dma_code)
         w[p0] = r0.l;
         ssync;
 
-        p0.l = LO(EBIU_SDBCTL);
-        p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-        r0 = mem_SDBCTL;
-        w[p0] = r0.l;
-        ssync;
-
         P2.H = hi(EBIU_SDGCTL);
         P2.L = lo(EBIU_SDGCTL);
         R0 = [P2];
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index caaab49e9cfa..f9160d83b91f 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -53,9 +53,3 @@
 # endif
 
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
-
-#ifdef CONFIG_MEM_SIZE
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM mem size must be multible of 4MB"
-#endif
-#endif
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index b7981d31c392..5e3f1d8a4fb8 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -7,7 +7,7 @@
 #include <linux/linkage.h>
 #include <asm/blackfin.h>
 #include <asm/mach/irq.h>
-
+#include <asm/dpmc.h>
 
 .section .l1.text
 
@@ -51,31 +51,32 @@ ENTRY(_sleep_mode)
         RETS = [SP++];
         ( R7:0, P5:0 ) = [SP++];
         RTS;
+ENDPROC(_sleep_mode)
 
 ENTRY(_hibernate_mode)
         [--SP] = ( R7:0, P5:0 );
         [--SP] =  RETS;
 
+        R3 = R0;
+        R0 = IWR_DISABLE_ALL;
+        R1 = IWR_DISABLE_ALL;
+        R2 = IWR_DISABLE_ALL;
         call _set_sic_iwr;
+        call _set_dram_srfs;
+        SSYNC;
 
         R0 = 0xFFFF (Z);
         call _set_rtc_istat;
 
         P0.H = hi(VR_CTL);
         P0.L = lo(VR_CTL);
-        R1 = W[P0](z);
-        BITSET (R1, 8);
-        BITCLR (R1, 0);
-        BITCLR (R1, 1);
-        W[P0] = R1.L;
-        SSYNC;
 
+        W[P0] = R3.L;
         CLI R2;
         IDLE;
-
-        /* Actually, adding anything may not be necessary...SDRAM contents
-         * are lost
-         */
+.Lforever:
+        jump .Lforever;
+ENDPROC(_hibernate_mode)
 
 ENTRY(_deep_sleep)
         [--SP] = ( R7:0, P5:0 );
@@ -131,6 +132,7 @@ ENTRY(_deep_sleep)
         RETS = [SP++];
         ( R7:0, P5:0 ) = [SP++];
         RTS;
+ENDPROC(_deep_sleep)
 
 ENTRY(_sleep_deeper)
         [--SP] = ( R7:0, P5:0 );
@@ -232,53 +234,73 @@ ENTRY(_sleep_deeper)
         RETS = [SP++];
         ( R7:0, P5:0 ) = [SP++];
         RTS;
+ENDPROC(_sleep_deeper)
 
 ENTRY(_set_dram_srfs)
         /*  set the dram to self refresh mode */
-#if defined(CONFIG_BF54x)
+        SSYNC;
+#if defined(EBIU_RSTCTL)        /* DDR */
         P0.H = hi(EBIU_RSTCTL);
         P0.L = lo(EBIU_RSTCTL);
         R2 = [P0];
-        R3.H = hi(SRREQ);
-        R3.L = lo(SRREQ);
-#else
-        P0.H = hi(EBIU_SDGCTL);
+        BITSET(R2, 3); /* SRREQ enter self-refresh mode */
+        [P0] = R2;
+        SSYNC;
+1:
+        R2 = [P0];
+        CC = BITTST(R2, 4);
+        if !CC JUMP 1b;
+#else                           /* SDRAM */
         P0.L = lo(EBIU_SDGCTL);
+        P0.H = hi(EBIU_SDGCTL);
         R2 = [P0];
-        R3.H = hi(SRFS);
-        R3.L = lo(SRFS);
-#endif
-        R2 = R2|R3;
+        BITSET(R2, 24); /* SRFS enter self-refresh mode */
         [P0] = R2;
-        ssync;
-#if defined(CONFIG_BF54x)
-.LSRR_MODE:
+        SSYNC;
+
+        P0.L = lo(EBIU_SDSTAT);
+        P0.H = hi(EBIU_SDSTAT);
+1:
+        R2 = w[P0];
+        SSYNC;
+        cc = BITTST(R2, 1); /* SDSRA poll self-refresh status */
+        if !cc jump 1b;
+
+        P0.L = lo(EBIU_SDGCTL);
+        P0.H = hi(EBIU_SDGCTL);
         R2 = [P0];
-        CC = BITTST(R2, 4);
-        if !CC JUMP .LSRR_MODE;
+        BITCLR(R2, 0); /* SCTLE disable CLKOUT */
+        [P0] = R2;
 #endif
         RTS;
+ENDPROC(_set_dram_srfs)
 
 ENTRY(_unset_dram_srfs)
         /*  set the dram out of self refresh mode */
-#if defined(CONFIG_BF54x)
+#if defined(EBIU_RSTCTL)        /* DDR */
         P0.H = hi(EBIU_RSTCTL);
         P0.L = lo(EBIU_RSTCTL);
         R2 = [P0];
-        R3.H = hi(SRREQ);
-        R3.L = lo(SRREQ);
-#else
+        BITCLR(R2, 3); /* clear SRREQ bit */
+        [P0] = R2;
+#elif defined(EBIU_SDGCTL)      /* SDRAM */
+
+        P0.L = lo(EBIU_SDGCTL); /* release CLKOUT from self-refresh */
+        P0.H = hi(EBIU_SDGCTL);
+        R2 = [P0];
+        BITSET(R2, 0); /* SCTLE enable CLKOUT */
+        [P0] = R2
+        SSYNC;
+
+        P0.L = lo(EBIU_SDGCTL); /* release SDRAM from self-refresh */
         P0.H = hi(EBIU_SDGCTL);
-        P0.L = lo(EBIU_SDGCTL);
         R2 = [P0];
-        R3.H = hi(SRFS);
-        R3.L = lo(SRFS);
+        BITCLR(R2, 24); /* clear SRFS bit */
+        [P0] = R2
 #endif
-        R3 = ~R3;
-        R2 = R2&R3;
-        [P0] = R2;
-        ssync;
+        SSYNC;
         RTS;
+ENDPROC(_unset_dram_srfs)
 
 ENTRY(_set_sic_iwr)
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
@@ -300,6 +322,7 @@ ENTRY(_set_sic_iwr)
 
         SSYNC;
         RTS;
+ENDPROC(_set_sic_iwr)
 
 ENTRY(_set_rtc_istat)
 #ifndef CONFIG_BF561
@@ -307,8 +330,14 @@ ENTRY(_set_rtc_istat)
         P0.L = lo(RTC_ISTAT);
         w[P0] = R0.L;
         SSYNC;
+#elif (ANOMALY_05000371)
+        nop;
+        nop;
+        nop;
+        nop;
 #endif
         RTS;
+ENDPROC(_set_rtc_istat)
 
 ENTRY(_test_pll_locked)
         P0.H = hi(PLL_STAT);
@@ -318,3 +347,509 @@ ENTRY(_test_pll_locked)
         CC = BITTST(R0,5);
         IF !CC JUMP 1b;
         RTS;
+ENDPROC(_test_pll_locked)
+
+.section .text
+
+ENTRY(_do_hibernate)
+        [--SP] = ( R7:0, P5:0 );
+        [--SP] =  RETS;
+        /* Save System MMRs */
+        R2 = R0;
+        P0.H = hi(PLL_CTL);
+        P0.L = lo(PLL_CTL);
+
+#ifdef SIC_IMASK0
+        PM_SYS_PUSH(SIC_IMASK0)
+#endif
+#ifdef SIC_IMASK1
+        PM_SYS_PUSH(SIC_IMASK1)
+#endif
+#ifdef SIC_IMASK2
+        PM_SYS_PUSH(SIC_IMASK2)
+#endif
+#ifdef SIC_IMASK
+        PM_SYS_PUSH(SIC_IMASK)
+#endif
+#ifdef SICA_IMASK0
+        PM_SYS_PUSH(SICA_IMASK0)
+#endif
+#ifdef SICA_IMASK1
+        PM_SYS_PUSH(SICA_IMASK1)
+#endif
+#ifdef SIC_IAR2
+        PM_SYS_PUSH(SIC_IAR0)
+        PM_SYS_PUSH(SIC_IAR1)
+        PM_SYS_PUSH(SIC_IAR2)
+#endif
+#ifdef SIC_IAR3
+        PM_SYS_PUSH(SIC_IAR3)
+#endif
+#ifdef SIC_IAR4
+        PM_SYS_PUSH(SIC_IAR4)
+        PM_SYS_PUSH(SIC_IAR5)
+        PM_SYS_PUSH(SIC_IAR6)
+#endif
+#ifdef SIC_IAR7
+        PM_SYS_PUSH(SIC_IAR7)
+#endif
+#ifdef SIC_IAR8
+        PM_SYS_PUSH(SIC_IAR8)
+        PM_SYS_PUSH(SIC_IAR9)
+        PM_SYS_PUSH(SIC_IAR10)
+        PM_SYS_PUSH(SIC_IAR11)
+#endif
+
+#ifdef SICA_IAR0
+        PM_SYS_PUSH(SICA_IAR0)
+        PM_SYS_PUSH(SICA_IAR1)
+        PM_SYS_PUSH(SICA_IAR2)
+        PM_SYS_PUSH(SICA_IAR3)
+        PM_SYS_PUSH(SICA_IAR4)
+        PM_SYS_PUSH(SICA_IAR5)
+        PM_SYS_PUSH(SICA_IAR6)
+        PM_SYS_PUSH(SICA_IAR7)
+#endif
+
+#ifdef SIC_IWR
+        PM_SYS_PUSH(SIC_IWR)
+#endif
+#ifdef SIC_IWR0
+        PM_SYS_PUSH(SIC_IWR0)
+#endif
+#ifdef SIC_IWR1
+        PM_SYS_PUSH(SIC_IWR1)
+#endif
+#ifdef SIC_IWR2
+        PM_SYS_PUSH(SIC_IWR2)
+#endif
+#ifdef SICA_IWR0
+        PM_SYS_PUSH(SICA_IWR0)
+#endif
+#ifdef SICA_IWR1
+        PM_SYS_PUSH(SICA_IWR1)
+#endif
+
+#ifdef PINT0_ASSIGN
+        PM_SYS_PUSH(PINT0_ASSIGN)
+        PM_SYS_PUSH(PINT1_ASSIGN)
+        PM_SYS_PUSH(PINT2_ASSIGN)
+        PM_SYS_PUSH(PINT3_ASSIGN)
+#endif
+
+        PM_SYS_PUSH(EBIU_AMBCTL0)
+        PM_SYS_PUSH(EBIU_AMBCTL1)
+        PM_SYS_PUSH16(EBIU_AMGCTL)
+
+#ifdef EBIU_FCTL
+        PM_SYS_PUSH(EBIU_MBSCTL)
+        PM_SYS_PUSH(EBIU_MODE)
+        PM_SYS_PUSH(EBIU_FCTL)
+#endif
+
+        PM_SYS_PUSH16(SYSCR)
+
+        /* Save Core MMRs */
+        P0.H = hi(SRAM_BASE_ADDRESS);
+        P0.L = lo(SRAM_BASE_ADDRESS);
+
+        PM_PUSH(DMEM_CONTROL)
+        PM_PUSH(DCPLB_ADDR0)
+        PM_PUSH(DCPLB_ADDR1)
+        PM_PUSH(DCPLB_ADDR2)
+        PM_PUSH(DCPLB_ADDR3)
+        PM_PUSH(DCPLB_ADDR4)
+        PM_PUSH(DCPLB_ADDR5)
+        PM_PUSH(DCPLB_ADDR6)
+        PM_PUSH(DCPLB_ADDR7)
+        PM_PUSH(DCPLB_ADDR8)
+        PM_PUSH(DCPLB_ADDR9)
+        PM_PUSH(DCPLB_ADDR10)
+        PM_PUSH(DCPLB_ADDR11)
+        PM_PUSH(DCPLB_ADDR12)
+        PM_PUSH(DCPLB_ADDR13)
+        PM_PUSH(DCPLB_ADDR14)
+        PM_PUSH(DCPLB_ADDR15)
+        PM_PUSH(DCPLB_DATA0)
+        PM_PUSH(DCPLB_DATA1)
+        PM_PUSH(DCPLB_DATA2)
+        PM_PUSH(DCPLB_DATA3)
+        PM_PUSH(DCPLB_DATA4)
+        PM_PUSH(DCPLB_DATA5)
+        PM_PUSH(DCPLB_DATA6)
+        PM_PUSH(DCPLB_DATA7)
+        PM_PUSH(DCPLB_DATA8)
+        PM_PUSH(DCPLB_DATA9)
+        PM_PUSH(DCPLB_DATA10)
+        PM_PUSH(DCPLB_DATA11)
+        PM_PUSH(DCPLB_DATA12)
+        PM_PUSH(DCPLB_DATA13)
+        PM_PUSH(DCPLB_DATA14)
+        PM_PUSH(DCPLB_DATA15)
+        PM_PUSH(IMEM_CONTROL)
+        PM_PUSH(ICPLB_ADDR0)
+        PM_PUSH(ICPLB_ADDR1)
+        PM_PUSH(ICPLB_ADDR2)
+        PM_PUSH(ICPLB_ADDR3)
+        PM_PUSH(ICPLB_ADDR4)
+        PM_PUSH(ICPLB_ADDR5)
+        PM_PUSH(ICPLB_ADDR6)
+        PM_PUSH(ICPLB_ADDR7)
+        PM_PUSH(ICPLB_ADDR8)
+        PM_PUSH(ICPLB_ADDR9)
+        PM_PUSH(ICPLB_ADDR10)
+        PM_PUSH(ICPLB_ADDR11)
+        PM_PUSH(ICPLB_ADDR12)
+        PM_PUSH(ICPLB_ADDR13)
+        PM_PUSH(ICPLB_ADDR14)
+        PM_PUSH(ICPLB_ADDR15)
+        PM_PUSH(ICPLB_DATA0)
+        PM_PUSH(ICPLB_DATA1)
+        PM_PUSH(ICPLB_DATA2)
+        PM_PUSH(ICPLB_DATA3)
+        PM_PUSH(ICPLB_DATA4)
+        PM_PUSH(ICPLB_DATA5)
+        PM_PUSH(ICPLB_DATA6)
+        PM_PUSH(ICPLB_DATA7)
+        PM_PUSH(ICPLB_DATA8)
+        PM_PUSH(ICPLB_DATA9)
+        PM_PUSH(ICPLB_DATA10)
+        PM_PUSH(ICPLB_DATA11)
+        PM_PUSH(ICPLB_DATA12)
+        PM_PUSH(ICPLB_DATA13)
+        PM_PUSH(ICPLB_DATA14)
+        PM_PUSH(ICPLB_DATA15)
+        PM_PUSH(EVT0)
+        PM_PUSH(EVT1)
+        PM_PUSH(EVT2)
+        PM_PUSH(EVT3)
+        PM_PUSH(EVT4)
+        PM_PUSH(EVT5)
+        PM_PUSH(EVT6)
+        PM_PUSH(EVT7)
+        PM_PUSH(EVT8)
+        PM_PUSH(EVT9)
+        PM_PUSH(EVT10)
+        PM_PUSH(EVT11)
+        PM_PUSH(EVT12)
+        PM_PUSH(EVT13)
+        PM_PUSH(EVT14)
+        PM_PUSH(EVT15)
+        PM_PUSH(IMASK)
+        PM_PUSH(ILAT)
+        PM_PUSH(IPRIO)
+        PM_PUSH(TCNTL)
+        PM_PUSH(TPERIOD)
+        PM_PUSH(TSCALE)
+        PM_PUSH(TCOUNT)
+        PM_PUSH(TBUFCTL)
+
+        /* Save Core Registers */
+        [--sp] = SYSCFG;
+        [--sp] = ( R7:0, P5:0 );
+        [--sp] = fp;
+        [--sp] = usp;
+
+        [--sp] = i0;
+        [--sp] = i1;
+        [--sp] = i2;
+        [--sp] = i3;
+
+        [--sp] = m0;
+        [--sp] = m1;
+        [--sp] = m2;
+        [--sp] = m3;
+
+        [--sp] = l0;
+        [--sp] = l1;
+        [--sp] = l2;
+        [--sp] = l3;
+
+        [--sp] = b0;
+        [--sp] = b1;
+        [--sp] = b2;
+        [--sp] = b3;
+        [--sp] = a0.x;
+        [--sp] = a0.w;
+        [--sp] = a1.x;
+        [--sp] = a1.w;
+
+        [--sp] = LC0;
+        [--sp] = LC1;
+        [--sp] = LT0;
+        [--sp] = LT1;
+        [--sp] = LB0;
+        [--sp] = LB1;
+
+        [--sp] = ASTAT;
+        [--sp] = CYCLES;
+        [--sp] = CYCLES2;
+
+        [--sp] = RETS;
+        r0 = RETI;
+        [--sp] = r0;
+        [--sp] = RETX;
+        [--sp] = RETN;
+        [--sp] = RETE;
+        [--sp] = SEQSTAT;
+
+        /* Save Magic, return address and Stack Pointer */
+        P0.H = 0;
+        P0.L = 0;
+        R0.H = 0xDEAD;  /* Hibernate Magic */
+        R0.L = 0xBEEF;
+        [P0++] = R0;    /* Store Hibernate Magic */
+        R0.H = .Lpm_resume_here;
+        R0.L = .Lpm_resume_here;
+        [P0++] = R0;    /* Save Return Address */
+        [P0++] = SP;    /* Save Stack Pointer */
+        P0.H = _hibernate_mode;
+        P0.L = _hibernate_mode;
+        R0 = R2;
+        call (P0); /* Goodbye */
+
+.Lpm_resume_here:
+
+        /* Restore Core Registers */
+        SEQSTAT = [sp++];
+        RETE = [sp++];
+        RETN = [sp++];
+        RETX = [sp++];
+        r0 = [sp++];
+        RETI = r0;
+        RETS = [sp++];
+
+        CYCLES2 = [sp++];
+        CYCLES = [sp++];
+        ASTAT = [sp++];
+
+        LB1 = [sp++];
+        LB0 = [sp++];
+        LT1 = [sp++];
+        LT0 = [sp++];
+        LC1 = [sp++];
+        LC0 = [sp++];
+
+        a1.w = [sp++];
+        a1.x = [sp++];
+        a0.w = [sp++];
+        a0.x = [sp++];
+        b3 = [sp++];
+        b2 = [sp++];
+        b1 = [sp++];
+        b0 = [sp++];
+
+        l3 = [sp++];
+        l2 = [sp++];
+        l1 = [sp++];
+        l0 = [sp++];
+
+        m3 = [sp++];
+        m2 = [sp++];
+        m1 = [sp++];
+        m0 = [sp++];
+
+        i3 = [sp++];
+        i2 = [sp++];
+        i1 = [sp++];
+        i0 = [sp++];
+
+        usp = [sp++];
+        fp = [sp++];
+
+        ( R7 : 0, P5 : 0) = [ SP ++ ];
+        SYSCFG = [sp++];
+
+        /* Restore Core MMRs */
+
+        PM_POP(TBUFCTL)
+        PM_POP(TCOUNT)
+        PM_POP(TSCALE)
+        PM_POP(TPERIOD)
+        PM_POP(TCNTL)
+        PM_POP(IPRIO)
+        PM_POP(ILAT)
+        PM_POP(IMASK)
+        PM_POP(EVT15)
+        PM_POP(EVT14)
+        PM_POP(EVT13)
+        PM_POP(EVT12)
+        PM_POP(EVT11)
+        PM_POP(EVT10)
+        PM_POP(EVT9)
+        PM_POP(EVT8)
+        PM_POP(EVT7)
+        PM_POP(EVT6)
+        PM_POP(EVT5)
+        PM_POP(EVT4)
+        PM_POP(EVT3)
+        PM_POP(EVT2)
+        PM_POP(EVT1)
+        PM_POP(EVT0)
+        PM_POP(ICPLB_DATA15)
+        PM_POP(ICPLB_DATA14)
+        PM_POP(ICPLB_DATA13)
+        PM_POP(ICPLB_DATA12)
+        PM_POP(ICPLB_DATA11)
+        PM_POP(ICPLB_DATA10)
+        PM_POP(ICPLB_DATA9)
+        PM_POP(ICPLB_DATA8)
+        PM_POP(ICPLB_DATA7)
+        PM_POP(ICPLB_DATA6)
+        PM_POP(ICPLB_DATA5)
+        PM_POP(ICPLB_DATA4)
+        PM_POP(ICPLB_DATA3)
+        PM_POP(ICPLB_DATA2)
+        PM_POP(ICPLB_DATA1)
+        PM_POP(ICPLB_DATA0)
+        PM_POP(ICPLB_ADDR15)
+        PM_POP(ICPLB_ADDR14)
+        PM_POP(ICPLB_ADDR13)
+        PM_POP(ICPLB_ADDR12)
+        PM_POP(ICPLB_ADDR11)
+        PM_POP(ICPLB_ADDR10)
+        PM_POP(ICPLB_ADDR9)
+        PM_POP(ICPLB_ADDR8)
+        PM_POP(ICPLB_ADDR7)
+        PM_POP(ICPLB_ADDR6)
+        PM_POP(ICPLB_ADDR5)
+        PM_POP(ICPLB_ADDR4)
+        PM_POP(ICPLB_ADDR3)
+        PM_POP(ICPLB_ADDR2)
+        PM_POP(ICPLB_ADDR1)
+        PM_POP(ICPLB_ADDR0)
+        PM_POP(IMEM_CONTROL)
+        PM_POP(DCPLB_DATA15)
+        PM_POP(DCPLB_DATA14)
+        PM_POP(DCPLB_DATA13)
+        PM_POP(DCPLB_DATA12)
+        PM_POP(DCPLB_DATA11)
+        PM_POP(DCPLB_DATA10)
+        PM_POP(DCPLB_DATA9)
+        PM_POP(DCPLB_DATA8)
+        PM_POP(DCPLB_DATA7)
+        PM_POP(DCPLB_DATA6)
+        PM_POP(DCPLB_DATA5)
+        PM_POP(DCPLB_DATA4)
+        PM_POP(DCPLB_DATA3)
+        PM_POP(DCPLB_DATA2)
+        PM_POP(DCPLB_DATA1)
+        PM_POP(DCPLB_DATA0)
+        PM_POP(DCPLB_ADDR15)
+        PM_POP(DCPLB_ADDR14)
+        PM_POP(DCPLB_ADDR13)
+        PM_POP(DCPLB_ADDR12)
+        PM_POP(DCPLB_ADDR11)
+        PM_POP(DCPLB_ADDR10)
+        PM_POP(DCPLB_ADDR9)
+        PM_POP(DCPLB_ADDR8)
+        PM_POP(DCPLB_ADDR7)
+        PM_POP(DCPLB_ADDR6)
+        PM_POP(DCPLB_ADDR5)
+        PM_POP(DCPLB_ADDR4)
+        PM_POP(DCPLB_ADDR3)
+        PM_POP(DCPLB_ADDR2)
+        PM_POP(DCPLB_ADDR1)
+        PM_POP(DCPLB_ADDR0)
+        PM_POP(DMEM_CONTROL)
+
+        /* Restore System MMRs */
+
+        P0.H = hi(PLL_CTL);
+        P0.L = lo(PLL_CTL);
+        PM_SYS_POP16(SYSCR)
+
+#ifdef EBIU_FCTL
+        PM_SYS_POP(EBIU_FCTL)
+        PM_SYS_POP(EBIU_MODE)
+        PM_SYS_POP(EBIU_MBSCTL)
+#endif
+        PM_SYS_POP16(EBIU_AMGCTL)
+        PM_SYS_POP(EBIU_AMBCTL1)
+        PM_SYS_POP(EBIU_AMBCTL0)
+
+#ifdef PINT0_ASSIGN
+        PM_SYS_POP(PINT3_ASSIGN)
+        PM_SYS_POP(PINT2_ASSIGN)
+        PM_SYS_POP(PINT1_ASSIGN)
+        PM_SYS_POP(PINT0_ASSIGN)
+#endif
+
+#ifdef SICA_IWR1
+        PM_SYS_POP(SICA_IWR1)
+#endif
+#ifdef SICA_IWR0
+        PM_SYS_POP(SICA_IWR0)
+#endif
+#ifdef SIC_IWR2
+        PM_SYS_POP(SIC_IWR2)
+#endif
+#ifdef SIC_IWR1
+        PM_SYS_POP(SIC_IWR1)
+#endif
+#ifdef SIC_IWR0
+        PM_SYS_POP(SIC_IWR0)
+#endif
+#ifdef SIC_IWR
+        PM_SYS_POP(SIC_IWR)
+#endif
+
+#ifdef SICA_IAR0
+        PM_SYS_POP(SICA_IAR7)
+        PM_SYS_POP(SICA_IAR6)
+        PM_SYS_POP(SICA_IAR5)
+        PM_SYS_POP(SICA_IAR4)
+        PM_SYS_POP(SICA_IAR3)
+        PM_SYS_POP(SICA_IAR2)
+        PM_SYS_POP(SICA_IAR1)
+        PM_SYS_POP(SICA_IAR0)
+#endif
+
+#ifdef SIC_IAR8
+        PM_SYS_POP(SIC_IAR11)
+        PM_SYS_POP(SIC_IAR10)
+        PM_SYS_POP(SIC_IAR9)
+        PM_SYS_POP(SIC_IAR8)
+#endif
+#ifdef SIC_IAR7
+        PM_SYS_POP(SIC_IAR7)
+#endif
+#ifdef SIC_IAR6
+        PM_SYS_POP(SIC_IAR6)
+        PM_SYS_POP(SIC_IAR5)
+        PM_SYS_POP(SIC_IAR4)
+#endif
+#ifdef SIC_IAR3
+        PM_SYS_POP(SIC_IAR3)
+#endif
+#ifdef SIC_IAR2
+        PM_SYS_POP(SIC_IAR2)
+        PM_SYS_POP(SIC_IAR1)
+        PM_SYS_POP(SIC_IAR0)
+#endif
+#ifdef SICA_IMASK1
+        PM_SYS_POP(SICA_IMASK1)
+#endif
+#ifdef SICA_IMASK0
+        PM_SYS_POP(SICA_IMASK0)
+#endif
+#ifdef SIC_IMASK
+        PM_SYS_POP(SIC_IMASK)
+#endif
+#ifdef SIC_IMASK2
+        PM_SYS_POP(SIC_IMASK2)
+#endif
+#ifdef SIC_IMASK1
+        PM_SYS_POP(SIC_IMASK1)
+#endif
+#ifdef SIC_IMASK0
+        PM_SYS_POP(SIC_IMASK0)
+#endif
+
+        [--sp] = RETI;  /* Clear Global Interrupt Disable */
+        SP += 4;
+
+        RETS = [SP++];
+        ( R7:0, P5:0 ) = [SP++];
+        RTS;
+ENDPROC(_do_hibernate)
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 038f70e0be65..eceb484d90f9 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -158,23 +158,45 @@ ENTRY(_ex_single_step)
         cc = r7 == r6;
         if cc jump _bfin_return_from_exception;
 
+        /* Don't do single step in hardware exception handler */
+        p5.l = lo(IPEND);
+        p5.h = hi(IPEND);
+        r6 = [p5];
+        cc = bittst(r6, 5);
+        if cc jump _bfin_return_from_exception;
+
+#ifdef CONFIG_KGDB
+        /* skip single step if current interrupt priority is higher than
+         * that of the first instruction, from which gdb starts single step */
+        r6 >>= 6;
+        r7 = 10;
+.Lfind_priority_start:
+        cc = bittst(r6, 0);
+        if cc jump .Lfind_priority_done;
+        r6 >>= 1;
+        r7 += -1;
+        cc = r7 == 0;
+        if cc jump .Lfind_priority_done;
+        jump.s .Lfind_priority_start;
+.Lfind_priority_done:
+        p4.l = _debugger_step;
+        p4.h = _debugger_step;
+        r6 = [p4];
+        cc = r6 == 0;
+        if cc jump .Ldo_single_step;
+        r6 += -1;
+        cc = r6 < r7;
+        if cc jump _bfin_return_from_exception;
+.Ldo_single_step:
+#endif
+
         /* If we were in user mode, do the single step normally.  */
-        p5.l = lo(IPEND);
-        p5.h = hi(IPEND);
         r6 = [p5];
         r7 = 0xffe0 (z);
         r7 = r7 & r6;
         cc = r7 == 0;
-        if !cc jump 1f;
-
-        /* Single stepping only a single instruction, so clear the trace
-         * bit here.  */
-        r7 = syscfg;
-        bitclr (r7, 0);
-        syscfg = R7;
-        jump _ex_trap_c;
+        if cc jump 1f;
 
-1:
         /*
          * We were in an interrupt handler.  By convention, all of them save
          * SYSCFG with their first instruction, so by checking whether our
@@ -202,11 +224,15 @@ ENTRY(_ex_single_step)
         cc = R7 == R6;
         if !cc jump _bfin_return_from_exception;
 
+1:
+        /* Single stepping only a single instruction, so clear the trace
+         * bit here.  */
         r7 = syscfg;
         bitclr (r7, 0);
         syscfg = R7;
 
-        /* Fall through to _bfin_return_from_exception.  */
+        jump _ex_trap_c;
+
 ENDPROC(_ex_single_step)
 
 ENTRY(_bfin_return_from_exception)
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index f5fd768022ea..64d746114e4b 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -459,6 +459,8 @@ static struct irq_chip bfin_gpio_irqchip = {
         .mask = bfin_gpio_mask_irq,
         .mask_ack = bfin_gpio_mask_ack_irq,
         .unmask = bfin_gpio_unmask_irq,
+        .disable = bfin_gpio_mask_irq,
+        .enable = bfin_gpio_unmask_irq,
         .set_type = bfin_gpio_irq_type,
         .startup = bfin_gpio_irq_startup,
         .shutdown = bfin_gpio_irq_shutdown,
@@ -846,6 +848,8 @@ static struct irq_chip bfin_gpio_irqchip = {
         .mask = bfin_gpio_mask_irq,
         .mask_ack = bfin_gpio_mask_ack_irq,
         .unmask = bfin_gpio_unmask_irq,
+        .disable = bfin_gpio_mask_irq,
+        .enable = bfin_gpio_unmask_irq,
         .set_type = bfin_gpio_irq_type,
         .startup = bfin_gpio_irq_startup,
         .shutdown = bfin_gpio_irq_shutdown,
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 0be805ca423f..4fe6a2366b13 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -38,8 +38,9 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
-#include <asm/dpmc.h>
 #include <asm/gpio.h>
+#include <asm/dma.h>
+#include <asm/dpmc.h>
 
 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
 #define WAKEUP_TYPE     PM_WAKE_HIGH
@@ -61,16 +62,17 @@
 #define WAKEUP_TYPE     PM_WAKE_BOTH_EDGES
 #endif
 
+
 void bfin_pm_suspend_standby_enter(void)
 {
+        unsigned long flags;
+
 #ifdef CONFIG_PM_WAKEUP_BY_GPIO
         gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
 #endif
 
-        u32 flags;
-
         local_irq_save(flags);
-        bfin_pm_setup();
+        bfin_pm_standby_setup();
 
 #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
         sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
@@ -78,7 +80,7 @@ void bfin_pm_suspend_standby_enter(void)
         sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
 #endif
 
-        bfin_pm_restore();
+        bfin_pm_standby_restore();
 
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
         bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
@@ -93,6 +95,195 @@ void bfin_pm_suspend_standby_enter(void)
         local_irq_restore(flags);
 }
 
+int bf53x_suspend_l1_mem(unsigned char *memptr)
+{
+        dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH);
+        dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START,
+                        L1_DATA_A_LENGTH);
+        dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
+                        (const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
+        memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
+                        L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
+                        L1_SCRATCH_LENGTH);
+
+        return 0;
+}
+
+int bf53x_resume_l1_mem(unsigned char *memptr)
+{
+        dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
+        dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
+                        L1_DATA_A_LENGTH);
+        dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
+                        L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
+        memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
+                        L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
+
+        return 0;
+}
+
+#ifdef CONFIG_BFIN_WB
+static void flushinv_all_dcache(void)
+{
+        u32 way, bank, subbank, set;
+        u32 status, addr;
+        u32 dmem_ctl = bfin_read_DMEM_CONTROL();
+
+        for (bank = 0; bank < 2; ++bank) {
+                if (!(dmem_ctl & (1 << (DMC1_P - bank))))
+                        continue;
+
+                for (way = 0; way < 2; ++way)
+                        for (subbank = 0; subbank < 4; ++subbank)
+                                for (set = 0; set < 64; ++set) {
+
+                                        bfin_write_DTEST_COMMAND(
+                                                way << 26 |
+                                                bank << 23 |
+                                                subbank << 16 |
+                                                set << 5
+                                        );
+                                        CSYNC();
+                                        status = bfin_read_DTEST_DATA0();
+
+                                        /* only worry about valid/dirty entries */
+                                        if ((status & 0x3) != 0x3)
+                                                continue;
+
+                                        /* construct the address using the tag */
+                                        addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
+
+                                        /* flush it */
+                                        __asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
+                                }
+        }
+}
+#endif
+
+static inline void dcache_disable(void)
+{
+#ifdef CONFIG_BFIN_DCACHE
+        unsigned long ctrl;
+
+#ifdef CONFIG_BFIN_WB
+        flushinv_all_dcache();
+#endif
+        SSYNC();
+        ctrl = bfin_read_DMEM_CONTROL();
+        ctrl &= ~ENDCPLB;
+        bfin_write_DMEM_CONTROL(ctrl);
+        SSYNC();
+#endif
+}
+
+static inline void dcache_enable(void)
+{
+#ifdef CONFIG_BFIN_DCACHE
+        unsigned long ctrl;
+        SSYNC();
+        ctrl = bfin_read_DMEM_CONTROL();
+        ctrl |= ENDCPLB;
+        bfin_write_DMEM_CONTROL(ctrl);
+        SSYNC();
+#endif
+}
+
+static inline void icache_disable(void)
+{
+#ifdef CONFIG_BFIN_ICACHE
+        unsigned long ctrl;
+        SSYNC();
+        ctrl = bfin_read_IMEM_CONTROL();
+        ctrl &= ~ENICPLB;
+        bfin_write_IMEM_CONTROL(ctrl);
+        SSYNC();
+#endif
+}
+
+static inline void icache_enable(void)
+{
+#ifdef CONFIG_BFIN_ICACHE
+        unsigned long ctrl;
+        SSYNC();
+        ctrl = bfin_read_IMEM_CONTROL();
+        ctrl |= ENICPLB;
+        bfin_write_IMEM_CONTROL(ctrl);
+        SSYNC();
+#endif
+}
+
+int bfin_pm_suspend_mem_enter(void)
+{
+        unsigned long flags;
+        int wakeup, ret;
+
+        unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
+                                         + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
+                                          GFP_KERNEL);
+
+        if (memptr == NULL) {
+                panic("bf53x_suspend_l1_mem malloc failed");
+                return -ENOMEM;
+        }
+
+        wakeup = bfin_read_VR_CTL() & ~FREQ;
+        wakeup |= SCKELOW;
+
+        /* FIXME: merge this somehow with set_irq_wake */
+#ifdef CONFIG_PM_BFIN_WAKE_RTC
+        wakeup |= WAKE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_PH6
+        wakeup |= PHYWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_CAN
+        wakeup |= CANWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_GP
+        wakeup |= GPWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_USB
+        wakeup |= USBWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD
+        wakeup |= KPADWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_ROTARY
+        wakeup |= ROTWE;
+#endif
+
+        local_irq_save(flags);
+
+        ret = blackfin_dma_suspend();
+
+        if (ret) {
+                local_irq_restore(flags);
+                kfree(memptr);
+                return ret;
+        }
+
+        bfin_gpio_pm_hibernate_suspend();
+
+        dcache_disable();
+        icache_disable();
+        bf53x_suspend_l1_mem(memptr);
+
+        do_hibernate(wakeup);   /* Goodbye */
+
+        bf53x_resume_l1_mem(memptr);
+
+        icache_enable();
+        dcache_enable();
+
+        bfin_gpio_pm_hibernate_restore();
+        blackfin_dma_resume();
+
+        local_irq_restore(flags);
+        kfree(memptr);
+
+        return 0;
+}
+
 /*
  *      bfin_pm_valid - Tell the PM core that we only support the standby sleep
  *                      state
@@ -101,7 +292,24 @@ void bfin_pm_suspend_standby_enter(void)
  */
 static int bfin_pm_valid(suspend_state_t state)
 {
-        return (state == PM_SUSPEND_STANDBY);
+        return (state == PM_SUSPEND_STANDBY
+#ifndef BF533_FAMILY
+        /*
+         * On BF533/2/1:
+         * If we enter Hibernate the SCKE Pin is driven Low,
+         * so that the SDRAM enters Self Refresh Mode.
+         * However when the reset sequence that follows hibernate
+         * state is executed, SCKE is driven High, taking the
+         * SDRAM out of Self Refresh.
+         *
+         * If you reconfigure and access the SDRAM "very quickly",
+         * you are likely to avoid errors, otherwise the SDRAM
+         * start losing its contents.
+         * An external HW workaround is possible using logic gates.
+         */
+        || state == PM_SUSPEND_MEM
+#endif
+        );
 }
 
 /*
@@ -115,10 +323,9 @@ static int bfin_pm_enter(suspend_state_t state)
         case PM_SUSPEND_STANDBY:
                 bfin_pm_suspend_standby_enter();
                 break;
-
         case PM_SUSPEND_MEM:
-                return -ENOTSUPP;
-
+                bfin_pm_suspend_mem_enter();
+                break;
         default:
                 return -EINVAL;
         }
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index 3246f91c7baa..5af3c31c9365 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -41,215 +41,309 @@
 #include <asm/blackfin.h>
 #include "blackfin_sram.h"
 
-spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
-
-#if CONFIG_L1_MAX_PIECE < 16
-#undef CONFIG_L1_MAX_PIECE
-#define CONFIG_L1_MAX_PIECE        16
-#endif
-
-#if CONFIG_L1_MAX_PIECE > 1024
-#undef CONFIG_L1_MAX_PIECE
-#define CONFIG_L1_MAX_PIECE        1024
-#endif
-
-#define SRAM_SLT_NULL      0
-#define SRAM_SLT_FREE      1
-#define SRAM_SLT_ALLOCATED 2
+static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
+static spinlock_t l2_sram_lock;
 
 /* the data structure for L1 scratchpad and DATA SRAM */
-struct l1_sram_piece {
+struct sram_piece {
         void *paddr;
         int size;
-        int flag;
         pid_t pid;
+        struct sram_piece *next;
 };
 
-static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_ssram_head, used_l1_ssram_head;
 
 #if L1_DATA_A_LENGTH != 0
-static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head;
 #endif
 
 #if L1_DATA_B_LENGTH != 0
-static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
 #endif
 
 #if L1_CODE_LENGTH != 0
-static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
+#endif
+
+#ifdef L2_LENGTH
+static struct sram_piece free_l2_sram_head, used_l2_sram_head;
 #endif
 
+static struct kmem_cache *sram_piece_cache;
+
 /* L1 Scratchpad SRAM initialization function */
-void __init l1sram_init(void)
+static void __init l1sram_init(void)
 {
-        printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
-               L1_SCRATCH_LENGTH >> 10);
+        free_l1_ssram_head.next =
+                kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+        if (!free_l1_ssram_head.next) {
+                printk(KERN_INFO"Fail to initialize Scratchpad data SRAM.\n");
+                return;
+        }
+
+        free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START;
+        free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH;
+        free_l1_ssram_head.next->pid = 0;
+        free_l1_ssram_head.next->next = NULL;
 
-        memset(&l1_ssram, 0x00, sizeof(l1_ssram));
-        l1_ssram[0].paddr = (void *)L1_SCRATCH_START;
-        l1_ssram[0].size = L1_SCRATCH_LENGTH;
-        l1_ssram[0].flag = SRAM_SLT_FREE;
+        used_l1_ssram_head.next = NULL;
 
         /* mutex initialize */
         spin_lock_init(&l1sram_lock);
+
+        printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
+               L1_SCRATCH_LENGTH >> 10);
 }
 
-void __init l1_data_sram_init(void)
+static void __init l1_data_sram_init(void)
 {
 #if L1_DATA_A_LENGTH != 0
-        memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram));
-        l1_data_A_sram[0].paddr = (void *)L1_DATA_A_START +
-                                        (_ebss_l1 - _sdata_l1);
-        l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
-        l1_data_A_sram[0].flag = SRAM_SLT_FREE;
-
-        printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n",
-               L1_DATA_A_LENGTH >> 10, l1_data_A_sram[0].size >> 10);
+        free_l1_data_A_sram_head.next =
+                kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+        if (!free_l1_data_A_sram_head.next) {
+                printk(KERN_INFO"Fail to initialize L1 Data A SRAM.\n");
+                return;
+        }
+
+        free_l1_data_A_sram_head.next->paddr =
+                (void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1);
+        free_l1_data_A_sram_head.next->size =
+                L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
+        free_l1_data_A_sram_head.next->pid = 0;
+        free_l1_data_A_sram_head.next->next = NULL;
+
+        used_l1_data_A_sram_head.next = NULL;
+
+        printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
+                L1_DATA_A_LENGTH >> 10,
+                free_l1_data_A_sram_head.next->size >> 10);
 #endif
 #if L1_DATA_B_LENGTH != 0
-        memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram));
-        l1_data_B_sram[0].paddr = (void *)L1_DATA_B_START +
-                                (_ebss_b_l1 - _sdata_b_l1);
-        l1_data_B_sram[0].size = L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
-        l1_data_B_sram[0].flag = SRAM_SLT_FREE;
-
-        printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n",
-               L1_DATA_B_LENGTH >> 10, l1_data_B_sram[0].size >> 10);
+        free_l1_data_B_sram_head.next =
+                kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+        if (!free_l1_data_B_sram_head.next) {
+                printk(KERN_INFO"Fail to initialize L1 Data B SRAM.\n");
+                return;
+        }
+
+        free_l1_data_B_sram_head.next->paddr =
+                (void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1);
+        free_l1_data_B_sram_head.next->size =
+                L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
+        free_l1_data_B_sram_head.next->pid = 0;
+        free_l1_data_B_sram_head.next->next = NULL;
+
+        used_l1_data_B_sram_head.next = NULL;
+
+        printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
+                L1_DATA_B_LENGTH >> 10,
+                free_l1_data_B_sram_head.next->size >> 10);
 #endif
 
         /* mutex initialize */
         spin_lock_init(&l1_data_sram_lock);
 }
 
-void __init l1_inst_sram_init(void)
+static void __init l1_inst_sram_init(void)
 {
 #if L1_CODE_LENGTH != 0
-        memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
-        l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
-        l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
-        l1_inst_sram[0].flag = SRAM_SLT_FREE;
+        free_l1_inst_sram_head.next =
+                kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+        if (!free_l1_inst_sram_head.next) {
+                printk(KERN_INFO"Fail to initialize L1 Instruction SRAM.\n");
+                return;
+        }
 
-        printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n",
-               L1_CODE_LENGTH >> 10, l1_inst_sram[0].size >> 10);
+        free_l1_inst_sram_head.next->paddr =
+                (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
+        free_l1_inst_sram_head.next->size =
+                L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
+        free_l1_inst_sram_head.next->pid = 0;
+        free_l1_inst_sram_head.next->next = NULL;
+
+        used_l1_inst_sram_head.next = NULL;
+
+        printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
+                L1_CODE_LENGTH >> 10,
+                free_l1_inst_sram_head.next->size >> 10);
 #endif
 
         /* mutex initialize */
         spin_lock_init(&l1_inst_sram_lock);
 }
 
-/* L1 memory allocate function */
-static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
+static void __init l2_sram_init(void)
 {
-        int i, index = 0;
-        void *addr = NULL;
+#ifdef L2_LENGTH
+        free_l2_sram_head.next =
+                kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+        if (!free_l2_sram_head.next) {
+                printk(KERN_INFO"Fail to initialize L2 SRAM.\n");
+                return;
+        }
 
-        if (size <= 0)
+        free_l2_sram_head.next->paddr = (void *)L2_START +
+                (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+        free_l2_sram_head.next->size = L2_LENGTH -
+                (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+        free_l2_sram_head.next->pid = 0;
+        free_l2_sram_head.next->next = NULL;
+
+        used_l2_sram_head.next = NULL;
+
+        printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
+                L2_LENGTH >> 10,
+                free_l2_sram_head.next->size >> 10);
+#endif
+
+        /* mutex initialize */
+        spin_lock_init(&l2_sram_lock);
+}
+void __init bfin_sram_init(void)
+{
+        sram_piece_cache = kmem_cache_create("sram_piece_cache",
+                                sizeof(struct sram_piece),
+                                0, SLAB_PANIC, NULL);
+
+        l1sram_init();
+        l1_data_sram_init();
+        l1_inst_sram_init();
+        l2_sram_init();
+}
+
+/* SRAM allocate function */
+static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
+                struct sram_piece *pused_head)
+{
+        struct sram_piece *pslot, *plast, *pavail;
+
+        if (size <= 0 || !pfree_head || !pused_head)
                 return NULL;
 
         /* Align the size */
         size = (size + 3) & ~3;
 
-        /* not use the good method to match the best slot !!! */
-        /* search an available memory slot */
-        for (i = 0; i < count; i++) {
-                if ((pfree[i].flag == SRAM_SLT_FREE)
-                    && (pfree[i].size >= size)) {
-                        addr = pfree[i].paddr;
-                        pfree[i].flag = SRAM_SLT_ALLOCATED;
-                        pfree[i].pid = current->pid;
-                        index = i;
-                        break;
-                }
+        pslot = pfree_head->next;
+        plast = pfree_head;
+
+        /* search an available piece slot */
+        while (pslot != NULL && size > pslot->size) {
+                plast = pslot;
+                pslot = pslot->next;
         }
-        if (i >= count)
+
+        if (!pslot)
                 return NULL;
 
-        /* updated the NULL memory slot !!! */
-        if (pfree[i].size > size) {
-                for (i = 0; i < count; i++) {
-                        if (pfree[i].flag == SRAM_SLT_NULL) {
-                                pfree[i].pid = 0;
-                                pfree[i].flag = SRAM_SLT_FREE;
-                                pfree[i].paddr = addr + size;
-                                pfree[i].size = pfree[index].size - size;
-                                pfree[index].size = size;
-                                break;
-                        }
-                }
+        if (pslot->size == size) {
+                plast->next = pslot->next;
+                pavail = pslot;
+        } else {
+                pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+
+                if (!pavail)
+                        return NULL;
+
+                pavail->paddr = pslot->paddr;
+                pavail->size = size;
+                pslot->paddr += size;
+                pslot->size -= size;
         }
 
-        return addr;
+        pavail->pid = current->pid;
+
+        pslot = pused_head->next;
+        plast = pused_head;
+
+        /* insert new piece into used piece list !!! */
+        while (pslot != NULL && pavail->paddr < pslot->paddr) {
+                plast = pslot;
+                pslot = pslot->next;
+        }
+
+        pavail->next = pslot;
+        plast->next = pavail;
+
+        return pavail->paddr;
 }
 
 /* Allocate the largest available block.  */
-static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
+static void *_sram_alloc_max(struct sram_piece *pfree_head,
+                                struct sram_piece *pused_head,
                                 unsigned long *psize)
 {
-        unsigned long best = 0;
-        int i, index = -1;
-        void *addr = NULL;
+        struct sram_piece *pslot, *pmax;
 
-        /* search an available memory slot */
-        for (i = 0; i < count; i++) {
-                if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
-                        addr = pfree[i].paddr;
-                        index = i;
-                        best = pfree[i].size;
-                }
+        if (!pfree_head || !pused_head)
+                return NULL;
+
+        pmax = pslot = pfree_head->next;
+
+        /* search an available piece slot */
+        while (pslot != NULL) {
+                if (pslot->size > pmax->size)
+                        pmax = pslot;
+                pslot = pslot->next;
         }
-        if (index < 0)
+
+        if (!pmax)
                 return NULL;
-        *psize = best;
 
-        pfree[index].pid = current->pid;
-        pfree[index].flag = SRAM_SLT_ALLOCATED;
-        return addr;
+        *psize = pmax->size;
+
+        return _sram_alloc(*psize, pfree_head, pused_head);
 }
 
-/* L1 memory free function */
-static int _l1_sram_free(const void *addr,
-                        struct l1_sram_piece *pfree,
-                        int count)
+/* SRAM free function */
+static int _sram_free(const void *addr,
+                        struct sram_piece *pfree_head,
+                        struct sram_piece *pused_head)
 {
-        int i, index = 0;
+        struct sram_piece *pslot, *plast, *pavail;
+
+        if (!pfree_head || !pused_head)
+                return -1;
 
         /* search the relevant memory slot */
-        for (i = 0; i < count; i++) {
-                if (pfree[i].paddr == addr) {
-                        if (pfree[i].flag != SRAM_SLT_ALLOCATED) {
-                                /* error log */
-                                return -1;
-                        }
-                        index = i;
-                        break;
-                }
+        pslot = pused_head->next;
+        plast = pused_head;
+
+        /* search an available piece slot */
+        while (pslot != NULL && pslot->paddr != addr) {
+                plast = pslot;
+                pslot = pslot->next;
         }
-        if (i >= count)
+
+        if (!pslot)
                 return -1;
 
-        pfree[index].pid = 0;
-        pfree[index].flag = SRAM_SLT_FREE;
-
-        /* link the next address slot */
-        for (i = 0; i < count; i++) {
-                if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr)
-                    && (pfree[i].flag == SRAM_SLT_FREE)) {
-                        pfree[i].pid = 0;
-                        pfree[i].flag = SRAM_SLT_NULL;
-                        pfree[index].size += pfree[i].size;
-                        pfree[index].flag = SRAM_SLT_FREE;
-                        break;
-                }
+        plast->next = pslot->next;
+        pavail = pslot;
+        pavail->pid = 0;
+
+        /* insert free pieces back to the free list */
+        pslot = pfree_head->next;
+        plast = pfree_head;
+
+        while (pslot != NULL && addr > pslot->paddr) {
+                plast = pslot;
+                pslot = pslot->next;
+        }
+
+        if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
+                plast->size += pavail->size;
+                kmem_cache_free(sram_piece_cache, pavail);
+        } else {
+                pavail->next = plast;
+                plast->next = pavail;
+                plast = pavail;
         }
 
-        /* link the last address slot */
-        for (i = 0; i < count; i++) {
-                if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) &&
-                    (pfree[i].flag == SRAM_SLT_FREE)) {
-                        pfree[index].flag = SRAM_SLT_NULL;
-                        pfree[i].size += pfree[index].size;
-                        break;
-                }
+        if (pslot && plast->paddr + plast->size == pslot->paddr) {
+                plast->size += pslot->size;
+                plast->next = pslot->next;
+                kmem_cache_free(sram_piece_cache, pslot);
         }
 
         return 0;
@@ -273,6 +367,11 @@ int sram_free(const void *addr)
                  && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
                 return l1_data_B_sram_free(addr);
 #endif
+#ifdef L2_LENGTH
+        else if (addr >= (void *)L2_START
+                 && addr < (void *)(L2_START + L2_LENGTH))
+                return l2_sram_free(addr);
+#endif
         else
                 return -1;
 }
@@ -287,7 +386,8 @@ void *l1_data_A_sram_alloc(size_t size)
         spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-        addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+        addr = _sram_alloc(size, &free_l1_data_A_sram_head,
+                        &used_l1_data_A_sram_head);
 #endif
 
         /* add mutex operation */
@@ -309,8 +409,8 @@ int l1_data_A_sram_free(const void *addr)
         spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-        ret = _l1_sram_free(addr,
-                           l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+        ret = _sram_free(addr, &free_l1_data_A_sram_head,
+                        &used_l1_data_A_sram_head);
 #else
         ret = -1;
 #endif
@@ -331,7 +431,8 @@ void *l1_data_B_sram_alloc(size_t size)
         /* add mutex operation */
         spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-        addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+        addr = _sram_alloc(size, &free_l1_data_B_sram_head,
+                        &used_l1_data_B_sram_head);
 
         /* add mutex operation */
         spin_unlock_irqrestore(&l1_data_sram_lock, flags);
@@ -355,7 +456,8 @@ int l1_data_B_sram_free(const void *addr)
         /* add mutex operation */
         spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-        ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+        ret = _sram_free(addr, &free_l1_data_B_sram_head,
+                        &used_l1_data_B_sram_head);
 
         /* add mutex operation */
         spin_unlock_irqrestore(&l1_data_sram_lock, flags);
@@ -408,7 +510,8 @@ void *l1_inst_sram_alloc(size_t size)
         /* add mutex operation */
         spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-        addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+        addr = _sram_alloc(size, &free_l1_inst_sram_head,
+                        &used_l1_inst_sram_head);
 
         /* add mutex operation */
         spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
@@ -432,7 +535,8 @@ int l1_inst_sram_free(const void *addr)
         /* add mutex operation */
         spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-        ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+        ret = _sram_free(addr, &free_l1_inst_sram_head,
+                        &used_l1_inst_sram_head);
 
         /* add mutex operation */
         spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
@@ -453,7 +557,8 @@ void *l1sram_alloc(size_t size)
         /* add mutex operation */
         spin_lock_irqsave(&l1sram_lock, flags);
 
-        addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram));
+        addr = _sram_alloc(size, &free_l1_ssram_head,
+                        &used_l1_ssram_head);
 
         /* add mutex operation */
         spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -470,7 +575,8 @@ void *l1sram_alloc_max(size_t *psize)
         /* add mutex operation */
         spin_lock_irqsave(&l1sram_lock, flags);
 
-        addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize);
+        addr = _sram_alloc_max(&free_l1_ssram_head,
+                        &used_l1_ssram_head, psize);
 
         /* add mutex operation */
         spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -487,7 +593,8 @@ int l1sram_free(const void *addr)
         /* add mutex operation */
         spin_lock_irqsave(&l1sram_lock, flags);
 
-        ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram));
+        ret = _sram_free(addr, &free_l1_ssram_head,
+                        &used_l1_ssram_head);
 
         /* add mutex operation */
         spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -495,6 +602,64 @@ int l1sram_free(const void *addr)
         return ret;
 }
 
+void *l2_sram_alloc(size_t size)
+{
+#ifdef L2_LENGTH
+        unsigned flags;
+        void *addr;
+
+        /* add mutex operation */
+        spin_lock_irqsave(&l2_sram_lock, flags);
+
+        addr = _sram_alloc(size, &free_l2_sram_head,
+                        &used_l2_sram_head);
+
+        /* add mutex operation */
+        spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+        pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
+                 (long unsigned int)addr, size);
+
+        return addr;
+#else
+        return NULL;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_alloc);
+
+void *l2_sram_zalloc(size_t size)
+{
+        void *addr = l2_sram_alloc(size);
+
+        if (addr)
+                memset(addr, 0x00, size);
+
+        return addr;
+}
+EXPORT_SYMBOL(l2_sram_zalloc);
+
+int l2_sram_free(const void *addr)
+{
+#ifdef L2_LENGTH
+        unsigned flags;
+        int ret;
+
+        /* add mutex operation */
+        spin_lock_irqsave(&l2_sram_lock, flags);
+
+        ret = _sram_free(addr, &free_l2_sram_head,
+                        &used_l2_sram_head);
+
+        /* add mutex operation */
+        spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+        return ret;
+#else
+        return -1;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_free);
+
 int sram_free_with_lsl(const void *addr)
 {
         struct sram_list_struct *lsl, **tmp;
@@ -533,6 +698,9 @@ void *sram_alloc_with_lsl(size_t size, unsigned long flags)
         if (addr == NULL && (flags & L1_DATA_B_SRAM))
                 addr = l1_data_B_sram_alloc(size);
 
+        if (addr == NULL && (flags & L2_SRAM))
+                addr = l2_sram_alloc(size);
+
         if (addr == NULL) {
                 kfree(lsl);
                 return NULL;
@@ -549,49 +717,80 @@ EXPORT_SYMBOL(sram_alloc_with_lsl);
 /* Once we get a real allocator, we'll throw all of this away.
  * Until then, we need some sort of visibility into the L1 alloc.
  */
-static void _l1sram_proc_read(char *buf, int *len, const char *desc,
-                struct l1_sram_piece *pfree, const int array_size)
+/* Need to keep line of output the same.  Currently, that is 44 bytes
+ * (including newline).
+ */
+static int _sram_proc_read(char *buf, int *len, int count, const char *desc,
+                struct sram_piece *pfree_head,
+                struct sram_piece *pused_head)
 {
-        int i;
-
-        *len += sprintf(&buf[*len], "--- L1 %-14s Size  PID State\n", desc);
-        for (i = 0; i < array_size; ++i) {
-                const char *alloc_type;
-                switch (pfree[i].flag) {
-                case SRAM_SLT_NULL:      alloc_type = "NULL"; break;
-                case SRAM_SLT_FREE:      alloc_type = "FREE"; break;
-                case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break;
-                default:                 alloc_type = "????"; break;
-                }
-                *len += sprintf(&buf[*len], "%p-%p %8i %4i %s\n",
-                        pfree[i].paddr, pfree[i].paddr + pfree[i].size,
-                        pfree[i].size, pfree[i].pid, alloc_type);
+        struct sram_piece *pslot;
+
+        if (!pfree_head || !pused_head)
+                return -1;
+
+        *len += sprintf(&buf[*len], "--- SRAM %-14s Size   PID State     \n", desc);
+
+        /* search the relevant memory slot */
+        pslot = pused_head->next;
+
+        while (pslot != NULL) {
+                *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+                        pslot->paddr, pslot->paddr + pslot->size,
+                        pslot->size, pslot->pid, "ALLOCATED");
+
+                pslot = pslot->next;
         }
+
+        pslot = pfree_head->next;
+
+        while (pslot != NULL) {
+                *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+                        pslot->paddr, pslot->paddr + pslot->size,
+                        pslot->size, pslot->pid, "FREE");
+
+                pslot = pslot->next;
+        }
+
+        return 0;
 }
-static int l1sram_proc_read(char *buf, char **start, off_t offset, int count,
+static int sram_proc_read(char *buf, char **start, off_t offset, int count,
                 int *eof, void *data)
 {
         int len = 0;
 
-        _l1sram_proc_read(buf, &len, "Scratchpad",
-                        l1_ssram, ARRAY_SIZE(l1_ssram));
+        if (_sram_proc_read(buf, &len, count, "Scratchpad",
+                        &free_l1_ssram_head, &used_l1_ssram_head))
+                goto not_done;
 #if L1_DATA_A_LENGTH != 0
-        _l1sram_proc_read(buf, &len, "Data A",
-                        l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+        if (_sram_proc_read(buf, &len, count, "L1 Data A",
+                        &free_l1_data_A_sram_head,
+                        &used_l1_data_A_sram_head))
+                goto not_done;
 #endif
 #if L1_DATA_B_LENGTH != 0
-        _l1sram_proc_read(buf, &len, "Data B",
-                        l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+        if (_sram_proc_read(buf, &len, count, "L1 Data B",
+                        &free_l1_data_B_sram_head,
+                        &used_l1_data_B_sram_head))
+                goto not_done;
 #endif
 #if L1_CODE_LENGTH != 0
-        _l1sram_proc_read(buf, &len, "Instruction",
-                        l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+        if (_sram_proc_read(buf, &len, count, "L1 Instruction",
+                        &free_l1_inst_sram_head, &used_l1_inst_sram_head))
+                goto not_done;
+#endif
+#ifdef L2_LENGTH
+        if (_sram_proc_read(buf, &len, count, "L2",
+                        &free_l2_sram_head, &used_l2_sram_head))
+                goto not_done;
 #endif
 
+        *eof = 1;
+ not_done:
         return len;
 }
 
-static int __init l1sram_proc_init(void)
+static int __init sram_proc_init(void)
 {
         struct proc_dir_entry *ptr;
         ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
@@ -600,8 +799,8 @@ static int __init l1sram_proc_init(void)
                 return -1;
         }
         ptr->owner = THIS_MODULE;
-        ptr->read_proc = l1sram_proc_read;
+        ptr->read_proc = sram_proc_read;
         return 0;
 }
-late_initcall(l1sram_proc_init);
+late_initcall(sram_proc_init);
 #endif
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
index 0fb73b78dd60..8cb0945563f9 100644
--- a/arch/blackfin/mm/blackfin_sram.h
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -30,9 +30,7 @@
 #ifndef __BLACKFIN_SRAM_H__
 #define __BLACKFIN_SRAM_H__
 
-extern void l1sram_init(void);
-extern void l1_inst_sram_init(void);
-extern void l1_data_sram_init(void);
+extern void bfin_sram_init(void);
 extern void *l1sram_alloc(size_t);
 
 #endif
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index ec3141fefd20..bc240abb8745 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -53,33 +53,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-        unsigned long i;
-        int free = 0, total = 0, reserved = 0, shared = 0;
-
-        int cached = 0;
-        printk(KERN_INFO "Mem-info:\n");
-        show_free_areas();
-        i = max_mapnr;
-        while (i-- > 0) {
-                total++;
-                if (PageReserved(mem_map + i))
-                        reserved++;
-                else if (PageSwapCache(mem_map + i))
-                        cached++;
-                else if (!page_count(mem_map + i))
-                        free++;
-                else
-                        shared += page_count(mem_map + i) - 1;
-        }
-        printk(KERN_INFO "%d pages of RAM\n", total);
-        printk(KERN_INFO "%d free pages\n", free);
-        printk(KERN_INFO "%d reserved pages\n", reserved);
-        printk(KERN_INFO "%d pages shared\n", shared);
-        printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
@@ -164,11 +137,14 @@ void __init mem_init(void)
                 "(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n",
                 (unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10,
                 initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10)));
+}
+
+static int __init sram_init(void)
+{
+        unsigned long tmp;
 
         /* Initialize the blackfin L1 Memory. */
-        l1sram_init();
-        l1_data_sram_init();
-        l1_inst_sram_init();
+        bfin_sram_init();
 
         /* Allocate this once; never free it.  We assume this gives us a
            pointer to the start of L1 scratchpad memory; panic if it
@@ -179,7 +155,10 @@ void __init mem_init(void)
                         tmp, (unsigned long)L1_SCRATCH_TASK_INFO);
                 panic("No L1, time to give up\n");
         }
+
+        return 0;
 }
+pure_initcall(sram_init);
 
 static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
 {
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile
index 20c83a53caf3..217203014433 100644
--- a/arch/cris/arch-v10/boot/Makefile
+++ b/arch/cris/arch-v10/boot/Makefile
@@ -2,7 +2,6 @@
 # arch/cris/arch-v10/boot/Makefile
 #
 
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 subdir- := compressed rescue
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
index 4a031cb27eb9..08d943ce4be7 100644
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ b/arch/cris/arch-v10/boot/compressed/Makefile
@@ -2,12 +2,10 @@
 # arch/cris/arch-v10/boot/compressed/Makefile
 #
 
-CC = gcc-cris -melf $(LINUXINCLUDE)
-ccflags-y += -O2
-LD = ld-cris
-ldflags-y += -T $(obj)/decompress.ld
+asflags-y += $(LINUXINCLUDE)
+ccflags-y += -O2 $(LINUXINCLUDE)
+ldflags-y += -T $(srctree)/$(obj)/decompress.ld
 OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
@@ -21,12 +19,6 @@ $(obj)/decompress.o: $(OBJECTS) FORCE
 $(obj)/decompress.bin: $(obj)/decompress.o FORCE
         $(call if_changed,objcopy)
 
-$(obj)/head.o: $(obj)/head.S .config
-        @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
-
-$(obj)/misc.o: $(obj)/misc.c .config
-        @$(CC) -D__KERNEL__ -c $< -o $@
-
 $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
         $(call if_changed,image)
 
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.ld b/arch/cris/arch-v10/boot/compressed/decompress.ld
index 0b0a14fe6177..e80f4594d543 100644
--- a/arch/cris/arch-v10/boot/compressed/decompress.ld
+++ b/arch/cris/arch-v10/boot/compressed/decompress.ld
@@ -1,4 +1,5 @@
-OUTPUT_FORMAT(elf32-us-cris)
+/* OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_FORMAT(elf32-cris)
 
 MEMORY 
         {
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
index 610bdb237553..981fbae84959 100644
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ b/arch/cris/arch-v10/boot/compressed/head.S
@@ -15,77 +15,77 @@
 #define COMMAND_LINE_MAGIC 0x87109563
 
         ;; Exported symbols
-        
-        .globl  _input_data
 
-        
+        .globl  input_data
+
+
         .text
 
         nop
         di
 
 ;; We need to initialze DRAM registers before we start using the DRAM
-        
-        cmp.d   RAM_INIT_MAGIC, r8      ; Already initialized?
+
+        cmp.d   RAM_INIT_MAGIC, $r8     ; Already initialized?
         beq     dram_init_finished
         nop
-        
+
 #include "../../lib/dram_init.S"
-        
-dram_init_finished:     
-                
+
+dram_init_finished:
+
         ;; Initiate the PA and PB ports
 
-        move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-        move.b   r0, [R_PORT_PA_DATA]
+        move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+        move.b   $r0, [R_PORT_PA_DATA]
 
-        move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-        move.b   r0, [R_PORT_PA_DIR]
+        move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+        move.b   $r0, [R_PORT_PA_DIR]
 
-        move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-        move.b   r0, [R_PORT_PB_DATA]
+        move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+        move.b   $r0, [R_PORT_PB_DATA]
 
-        move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-        move.b   r0, [R_PORT_PB_DIR]
+        move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+        move.b   $r0, [R_PORT_PB_DIR]
 
         ;; Setup the stack to a suitably high address.
         ;; We assume 8 MB is the minimum DRAM in an eLinux
         ;; product and put the sp at the top for now.
 
-        move.d  0x40800000, sp
+        move.d  0x40800000, $sp
 
         ;; Figure out where the compressed piggyback image is
         ;; in the flash (since we wont try to copy it to DRAM
         ;; before unpacking). It is at _edata, but in flash.
         ;; Use (_edata - basse) as offset to the current PC.
-        
-basse:  move.d  pc, r5
-        and.d   0x7fffffff, r5  ; strip any non-cache bit
-        subq    2, r5           ; compensate for the move.d pc instr
-        move.d  r5, r0          ; save for later - flash address of 'basse'
-        add.d   _edata, r5
-        sub.d   basse, r5       ; r5 = flash address of '_edata'
-        
+
+basse:  move.d  $pc, $r5
+        and.d   0x7fffffff, $r5 ; strip any non-cache bit
+        subq    2, $r5          ; compensate for the move.d $pc instr
+        move.d  $r5, $r0                ; save for later - flash address of 'basse'
+        add.d   _edata, $r5
+        sub.d   basse, $r5      ; $r5 = flash address of '_edata'
+
         ;; Copy text+data to DRAM
-        
-        move.d  basse, r1       ; destination
-        move.d  _edata, r2      ; end destination
-1:      move.w  [r0+], r3
-        move.w  r3, [r1+]
-        cmp.d   r2, r1
+
+        move.d  basse, $r1      ; destination
+        move.d  _edata, $r2     ; end destination
+1:      move.w  [$r0+], $r3
+        move.w  $r3, [$r1+]
+        cmp.d   $r2, $r1
         bcs     1b
         nop
 
-        move.d  r5, [_input_data] ; for the decompressor
+        move.d  $r5, [input_data] ; for the decompressor
 
 
         ;; Clear the decompressors BSS (between _edata and _end)
-        
-        moveq   0, r0
-        move.d  _edata, r1
-        move.d  _end, r2
-1:      move.w  r0, [r1+]
-        cmp.d   r2, r1
+
+        moveq   0, $r0
+        move.d  _edata, $r1
+        move.d  _end, $r2
+1:      move.w  $r0, [$r1+]
+        cmp.d   $r2, $r1
         bcs     1b
         nop
 
@@ -94,16 +94,16 @@ basse:	move.d	pc, r5
         move.d  $r10, [$r12]
         move.d  _cmd_line_addr, $r12
         move.d  $r11, [$r12]
-        
-        ;; Do the decompression and save compressed size in _inptr
 
-        jsr     _decompress_kernel
-        
-        ;; Put start address of root partition in r9 so the kernel can use it
+        ;; Do the decompression and save compressed size in inptr
+
+        jsr     decompress_kernel
+
+        ;; Put start address of root partition in $r9 so the kernel can use it
         ;; when mounting from flash
 
-        move.d  [_input_data], r9       ; flash address of compressed kernel
-        add.d   [_inptr], r9            ; size of compressed kernel
+        move.d  [input_data], $r9       ; flash address of compressed kernel
+        add.d   [inptr], $r9            ; size of compressed kernel
 
         ;; Restore command line magic and address.
         move.d  _cmd_line_magic, $r10
@@ -112,12 +112,12 @@ basse:	move.d	pc, r5
         move.d  [$r11], $r11
 
         ;; Enter the decompressed kernel
-        move.d  RAM_INIT_MAGIC, r8      ; Tell kernel that DRAM is initialized
+        move.d  RAM_INIT_MAGIC, $r8     ; Tell kernel that DRAM is initialized
         jump    0x40004000      ; kernel is linked to this address
-        
+
         .data
 
-_input_data:
+input_data:
         .dword  0               ; used by the decompressor
 _cmd_line_magic:
         .dword 0
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
index 9a43ab19391e..d933c89889db 100644
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ b/arch/cris/arch-v10/boot/compressed/misc.c
@@ -29,12 +29,10 @@
 #define OF(args)  args
 #define STATIC static
 
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
-             size_t __n);
-
-#define memzero(s, n)     memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
 
+#define memzero(s, n)     memset((s), 0, (n))
 
 typedef unsigned char  uch;
 typedef unsigned short ush;
@@ -62,79 +60,57 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
 #define RESERVED     0xC0 /* bit 6,7:   reserved */
 
-#define get_byte() inbuf[inptr++]       
-        
+#define get_byte() (inbuf[inptr++])
+
 /* Diagnostic functions */
 #ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Assert(cond, msg) do { \
+                if (!(cond)) \
+                        error(msg); \
+        } while (0)
 #  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Tracev(x) do { \
+                if (verbose) \
+                        fprintf x; \
+        } while (0)
+#  define Tracevv(x) do { \
+                if (verbose > 1) \
+                        fprintf x; \
+        } while (0)
+#  define Tracec(c, x) do { \
+                if (verbose && (c)) \
+                        fprintf x; \
+        } while (0)
+#  define Tracecv(c, x) do { \
+                if (verbose > 1 && (c)) \
+                        fprintf x; \
+        } while (0)
 #else
-#  define Assert(cond,msg)
+#  define Assert(cond, msg)
 #  define Trace(x)
 #  define Tracev(x)
 #  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
 #endif
 
-static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char *input_data;  /* lives in head.S */
 
 static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
- 
-static void *malloc(int size);
-static void free(void *where);
-static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
- 
 static void puts(const char *);
 
 /* the "heap" is put directly after the BSS ends, at end */
-  
-extern int end;
-static long free_mem_ptr = (long)&end;
- 
-#include "../../../../../lib/inflate.c"
-
-static void *malloc(int size)
-{
-        void *p;
-
-        if (size <0) error("Malloc error");
-
-        free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
-        p = (void *)free_mem_ptr;
-        free_mem_ptr += size;
-
-        return p;
-}
-
-static void free(void *where)
-{       /* Don't care */
-}
 
-static void gzip_mark(void **ptr)
-{
-        *ptr = (void *) free_mem_ptr;
-}
+extern int _end;
+static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
-static void gzip_release(void **ptr)
-{
-        free_mem_ptr = (long) *ptr;
-}
+#include "../../../../../lib/inflate.c"
 
 /* decompressor info and error messages to serial console */
 
@@ -142,44 +118,47 @@ static void
 puts(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-        while(*s) {
+        while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
-                while(!(*R_SERIAL0_STATUS & (1 << 5))) ;
+                while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
                 *R_SERIAL0_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
-                while(!(*R_SERIAL1_STATUS & (1 << 5))) ;
+                while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
                 *R_SERIAL1_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
-                while(!(*R_SERIAL2_STATUS & (1 << 5))) ;
+                while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
                 *R_SERIAL2_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
-                while(!(*R_SERIAL3_STATUS & (1 << 5))) ;
+                while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
                 *R_SERIAL3_TR_DATA = *s++;
 #endif
         }
 #endif
 }
 
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
 {
         int i;
-        char *ss = (char*)s;
+        char *ss = (char *)s;
 
-        for (i=0;i<n;i++) ss[i] = c;
+        for (i = 0; i < n; i++)
+                ss[i] = c;
+
+        return s;
 }
 
-void*
-memcpy(void* __dest, __const void* __src,
-                            size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
         int i;
         char *d = (char *)__dest, *s = (char *)__src;
 
-        for (i=0;i<__n;i++) d[i] = s[i];
+        for (i = 0; i < __n; i++)
+                d[i] = s[i];
+
+        return __dest;
 }
 
 /* ===========================================================================
@@ -187,46 +166,44 @@ memcpy(void* __dest, __const void* __src,
  * (Used for the decompressed data only.)
  */
 
-static void
-flush_window()
+static void flush_window(void)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-    
-    in = window;
-    out = &output_data[output_ptr]; 
-    for (n = 0; n < outcnt; n++) {
-            ch = *out++ = *in++;
-            c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
+        ulg c = crc;         /* temporary variable */
+        unsigned n;
+        uch *in, *out, ch;
+
+        in = window;
+        out = &output_data[output_ptr];
+        for (n = 0; n < outcnt; n++) {
+                ch = *out = *in;
+                out++;
+                in++;
+                c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+        }
+        crc = c;
+        bytes_out += (ulg)outcnt;
+        output_ptr += (ulg)outcnt;
+        outcnt = 0;
 }
 
-static void
-error(char *x)
+static void error(char *x)
 {
         puts("\n\n");
         puts(x);
         puts("\n\n -- System halted\n");
 
-        while(1);       /* Halt */
+        while (1);      /* Halt */
 }
 
-void
-setup_normal_output_buffer()
+void setup_normal_output_buffer(void)
 {
         output_data = (char *)KERNEL_LOAD_ADR;
 }
 
-void
-decompress_kernel()
+void decompress_kernel(void)
 {
         char revision;
-        
+
         /* input_data is set in head.S */
         inbuf = input_data;
 
@@ -257,11 +234,10 @@ decompress_kernel()
 
         makecrc();
 
-        __asm__ volatile ("move vr,%0" : "=rm" (revision));
-        if (revision < 10)
-        {
+        __asm__ volatile ("move $vr,%0" : "=rm" (revision));
+        if (revision < 10) {
                 puts("You need an ETRAX 100LX to run linux 2.6\n");
-                while(1);
+                while (1);
         }
 
         puts("Uncompressing Linux...\n");
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
index 2e5045b9e19c..07688da92708 100644
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ b/arch/cris/arch-v10/boot/rescue/Makefile
@@ -2,12 +2,9 @@
 # Makefile for rescue (bootstrap) code
 #
 
-CC = gcc-cris -mlinux $(LINUXINCLUDE)
-ccflags-y += -O2
-asflags-y += -traditional
-LD = gcc-cris -mlinux -nostdlib
-ldflags-y += -T $(obj)/rescue.ld
-OBJCOPY = objcopy-cris
+ccflags-y += -O2 $(LINUXINCLUDE)
+asflags-y += $(LINUXINCLUDE)
+ldflags-y += -T $(srctree)/$(obj)/rescue.ld
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
 OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 52103d16dc6c..8769dc914073 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -233,7 +233,7 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 
                 if (copy_to_user((struct rtc_time *) arg, &tm,
                                  sizeof tm)) {
-                        spin_unlock(&rtc_lock);
+                        mutex_unlock(&rtc_lock);
                         return -EFAULT;
                 }
 
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
index 04d5eee2c90c..3dc6e91ba39e 100644
--- a/arch/cris/arch-v10/kernel/debugport.c
+++ b/arch/cris/arch-v10/kernel/debugport.c
@@ -426,12 +426,18 @@ static int dummy_write(struct tty_struct * tty,
         return count;
 }
 
-static int
-dummy_write_room(struct tty_struct *tty)
+static int dummy_write_room(struct tty_struct *tty)
 {
         return 8192;
 }
 
+static const struct tty_operations dummy_ops = {
+        .open = dummy_open,
+        .close = dummy_close,
+        .write = dummy_write,
+        .write_room = dummy_write_room,
+};
+
 void __init
 init_dummy_console(void)
 {
@@ -444,14 +450,14 @@ init_dummy_console(void)
         dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
         dummy_driver.subtype = SERIAL_TYPE_NORMAL;
         dummy_driver.init_termios = tty_std_termios;
+        /* Normally B9600 default... */
         dummy_driver.init_termios.c_cflag =
-                B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+                B115200 | CS8 | CREAD | HUPCL | CLOCAL;
         dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+        dummy_driver.init_termios.c_ispeed = 115200;
+        dummy_driver.init_termios.c_ospeed = 115200;
 
-        dummy_driver.open = dummy_open;
-        dummy_driver.close = dummy_close;
-        dummy_driver.write = dummy_write;
-        dummy_driver.write_room = dummy_write_room;
+        dummy_driver.ops = &dummy_ops;
         if (tty_register_driver(&dummy_driver))
                 panic("Couldn't register dummy serial driver\n");
 }
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index a3ca55150745..6fea45f2e40c 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -278,14 +278,6 @@ void putDebugChar (int val);
 
 void enableDebugIRQ (void);
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex (int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex (int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex (char ch);
 
@@ -356,9 +348,6 @@ extern unsigned char executing_task;
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char remcomInBuffer[BUFMAX];
 static char remcomOutBuffer[BUFMAX];
@@ -499,8 +488,8 @@ gdb_cris_strtol (const char *s, char **endptr, int base)
         char *sd;
         int x = 0;
         
-        for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-                x = x * base + (sd - hexchars);
+        for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+                x = x * base + (sd - hex_asc);
         
         if (endptr)
         {
@@ -670,22 +659,6 @@ read_register (char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-        return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-        return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex (char ch)
@@ -721,8 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
                 for (i = 0; i < count; i++) {
                         ch = *mem++;
-                        *buf++ = highhex (ch);
-                        *buf++ = lowhex (ch);
+                        buf = pack_hex_byte(buf, ch);
                 }
         }
         
@@ -857,9 +829,9 @@ putpacket(char *buffer)
                                 src++;
                         }
                 }
-                putDebugChar ('#');
-                putDebugChar (highhex (checksum));
-                putDebugChar (lowhex (checksum));
+                putDebugChar('#');
+                putDebugChar(hex_asc_hi(checksum));
+                putDebugChar(hex_asc_lo(checksum));
         } while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -895,9 +867,8 @@ stub_is_stopped(int sigval)
         
         /* Send trap type (converted to signal) */
 
-        *ptr++ = 'T';   
-        *ptr++ = highhex (sigval);
-        *ptr++ = lowhex (sigval);
+        *ptr++ = 'T';
+        ptr = pack_hex_byte(ptr, sigval);
 
         /* Send register contents. We probably only need to send the
          * PC, frame pointer and stack pointer here. Other registers will be
@@ -910,9 +881,7 @@ stub_is_stopped(int sigval)
                 status = read_register (regno, &reg_cont);
                 
                 if (status == SUCCESS) {
-                        
-                        *ptr++ = highhex (regno);
-                        *ptr++ = lowhex (regno);
+                        ptr = pack_hex_byte(ptr, regno);
                         *ptr++ = ':';
 
                         ptr = mem2hex(ptr, (unsigned char *)&reg_cont,
@@ -937,8 +906,8 @@ stub_is_stopped(int sigval)
         /* Store thread:r...; with the executing task TID. */
         gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:");
         pos += gdb_cris_strlen ("thread:");
-        remcomOutBuffer[pos++] = highhex (executing_task);
-        remcomOutBuffer[pos++] = lowhex (executing_task);
+        remcomOutBuffer[pos++] = hex_asc_hi(executing_task);
+        remcomOutBuffer[pos++] = hex_asc_lo(executing_task);
         gdb_cris_strcpy (&remcomOutBuffer[pos], ";");
 #endif
 
@@ -1126,8 +1095,8 @@ handle_exception (int sigval)
                                    Success: SAA, where AA is the signal number.
                                    Failure: void. */
                                 remcomOutBuffer[0] = 'S';
-                                remcomOutBuffer[1] = highhex (sigval);
-                                remcomOutBuffer[2] = lowhex (sigval);
+                                remcomOutBuffer[1] = hex_asc_hi(sigval);
+                                remcomOutBuffer[2] = hex_asc_lo(sigval);
                                 remcomOutBuffer[3] = 0;
                                 break;
                                 
@@ -1224,23 +1193,23 @@ handle_exception (int sigval)
                                                 case 'C':
                                                         /* Identify the remote current thread. */
                                                         gdb_cris_strcpy (&remcomOutBuffer[0], "QC");
-                                                        remcomOutBuffer[2] = highhex (current_thread_c);
-                                                        remcomOutBuffer[3] = lowhex (current_thread_c);
+                                                        remcomOutBuffer[2] = hex_asc_hi(current_thread_c);
+                                                        remcomOutBuffer[3] = hex_asc_lo(current_thread_c);
                                                         remcomOutBuffer[4] = '\0';
                                                         break;
                                                 case 'L':
                                                         gdb_cris_strcpy (&remcomOutBuffer[0], "QM");
                                                         /* Reply with number of threads. */
                                                         if (os_is_started()) {
-                                                                remcomOutBuffer[2] = highhex (number_of_tasks);
-                                                                remcomOutBuffer[3] = lowhex (number_of_tasks);
+                                                                remcomOutBuffer[2] = hex_asc_hi(number_of_tasks);
+                                                                remcomOutBuffer[3] = hex_asc_lo(number_of_tasks);
                                                         }
                                                         else {
-                                                                remcomOutBuffer[2] = highhex (0);
-                                                                remcomOutBuffer[3] = lowhex (1);
+                                                                remcomOutBuffer[2] = hex_asc_hi(0);
+                                                                remcomOutBuffer[3] = hex_asc_lo(1);
                                                         }
                                                         /* Done with the reply. */
-                                                        remcomOutBuffer[4] = lowhex (1);
+                                                        remcomOutBuffer[4] = hex_asc_lo(1);
                                                         pos = 5;
                                                         /* Expects the argument thread id. */
                                                         for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++)
@@ -1251,16 +1220,16 @@ handle_exception (int sigval)
                                                                 for (thread_id = 0; thread_id < number_of_tasks; thread_id++) {
                                                                         nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
                                                                         for (; pos < nextpos; pos ++)
-                                                                                remcomOutBuffer[pos] = lowhex (0);
-                                                                        remcomOutBuffer[pos++] = lowhex (thread_id);
+                                                                                remcomOutBuffer[pos] = hex_asc_lo(0);
+                                                                        remcomOutBuffer[pos++] = hex_asc_lo(thread_id);
                                                                 }
                                                         }
                                                         else {
                                                                 /* Store the thread identifier of the boot task. */
                                                                 nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
                                                                 for (; pos < nextpos; pos ++)
-                                                                        remcomOutBuffer[pos] = lowhex (0);
-                                                                remcomOutBuffer[pos++] = lowhex (current_thread_c);
+                                                                        remcomOutBuffer[pos] = hex_asc_lo(0);
+                                                                remcomOutBuffer[pos++] = hex_asc_lo(current_thread_c);
                                                         }
                                                         remcomOutBuffer[pos] = '\0';
                                                         break;
diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c
index e0fcd1a9bfd5..742fd1974c2e 100644
--- a/arch/cris/arch-v10/mm/init.c
+++ b/arch/cris/arch-v10/mm/init.c
@@ -182,7 +182,7 @@ paging_init(void)
          * mem_map page array.
          */
 
-        free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+        free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
 }
 
 /* Initialize remaps of some I/O-ports. It is important that this
diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile
index 3f91349c5f12..99896ad60b30 100644
--- a/arch/cris/arch-v32/boot/Makefile
+++ b/arch/cris/arch-v32/boot/Makefile
@@ -2,7 +2,6 @@
 # arch/cris/arch-v32/boot/Makefile
 #
 
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary -R .note -R .comment
 
 subdir- := compressed rescue
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
index 2c8c2c3039c5..d6335f26083b 100644
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ b/arch/cris/arch-v32/boot/compressed/Makefile
@@ -2,14 +2,10 @@
 # arch/cris/arch-v32/boot/compressed/Makefile
 #
 
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
 asflags-y += -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
 ccflags-y += -O2 -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(obj)/decompress.ld
-obj-y = head.o misc.o
+ldflags-y += -T $(srctree)/$(obj)/decompress.ld
 OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c
index 55b2695c5d70..3595e16e82bc 100644
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ b/arch/cris/arch-v32/boot/compressed/misc.c
@@ -89,20 +89,14 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char *input_data;  /* lives in head.S */
 
-static long bytes_out = 0;
+static long bytes_out;
 static uch *output_data;
-static unsigned long output_ptr = 0;
+static unsigned long output_ptr;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -110,37 +104,10 @@ static void puts(const char *);
 
 extern int _end;
 static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
 #include "../../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-        void *p;
-
-        if (size <0) error("Malloc error");
-
-        free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
-        p = (void *)free_mem_ptr;
-        free_mem_ptr += size;
-
-        return p;
-}
-
-static void free(void *where)
-{       /* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-        *ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-        free_mem_ptr = (long) *ptr;
-}
-
 /* decompressor info and error messages to serial console */
 
 static inline void
diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile
index c0987795dcb7..44ae0ad61f90 100644
--- a/arch/cris/arch-v32/boot/rescue/Makefile
+++ b/arch/cris/arch-v32/boot/rescue/Makefile
@@ -7,9 +7,8 @@ ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
                 -I $(srctree)/include/asm/arch
 asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
 LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(obj)/rescue.ld
+ldflags-y += -T $(srctree)/$(obj)/rescue.ld
 LDPOSTFLAGS = -lgcc
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
 OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index 53db3870ba04..f263ab571221 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -229,7 +229,7 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 
                 if (copy_to_user((struct rtc_time *) arg, &tm,
                                  sizeof tm)) {
-                        spin_unlock(&rtc_lock);
+                        mutex_unlock(&rtc_lock);
                         return -EFAULT;
                 }
 
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index 4e2e2e271efb..8bd5a5bc0dc7 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -398,14 +398,6 @@ void putDebugChar(int val)
 }
 #endif
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex(int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex(int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex(char ch);
 
@@ -464,9 +456,6 @@ void breakpoint(void);
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char input_buffer[BUFMAX];
 static char output_buffer[BUFMAX];
@@ -550,8 +539,8 @@ gdb_cris_strtol(const char *s, char **endptr, int base)
         char *sd;
         int x = 0;
 
-        for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-                x = x * base + (sd - hexchars);
+        for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+                x = x * base + (sd - hex_asc);
 
         if (endptr) {
                 /* Unconverted suffix is stored in endptr unless endptr is NULL. */
@@ -655,22 +644,6 @@ read_register(char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-        return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-        return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex(char ch)
@@ -704,8 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
                 for (i = 0; i < count; i++) {
                         ch = *mem++;
-                        *buf++ = highhex (ch);
-                        *buf++ = lowhex (ch);
+                        buf = pack_hex_byte(buf, ch);
                 }
         }
         /* Terminate properly. */
@@ -723,8 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count)
         mem += count - 1;
         for (i = 0; i < count; i++) {
                 ch = *mem--;
-                *buf++ = highhex (ch);
-                *buf++ = lowhex (ch);
+                buf = pack_hex_byte(buf, ch);
         }
 
         /* Terminate properly. */
@@ -862,8 +833,8 @@ putpacket(char *buffer)
                         }
                 }
                 putDebugChar('#');
-                putDebugChar(highhex (checksum));
-                putDebugChar(lowhex (checksum));
+                putDebugChar(hex_asc_hi(checksum));
+                putDebugChar(hex_asc_lo(checksum));
         } while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -909,8 +880,7 @@ stub_is_stopped(int sigval)
         /* Send trap type (converted to signal) */
 
         *ptr++ = 'T';
-        *ptr++ = highhex(sigval);
-        *ptr++ = lowhex(sigval);
+        ptr = pack_hex_byte(ptr, sigval);
 
         if (((reg.exs & 0xff00) >> 8) == 0xc) {
 
@@ -1018,30 +988,26 @@ stub_is_stopped(int sigval)
         }
         /* Only send PC, frame and stack pointer. */
         read_register(PC, &reg_cont);
-        *ptr++ = highhex(PC);
-        *ptr++ = lowhex(PC);
+        ptr = pack_hex_byte(PC);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
         *ptr++ = ';';
 
         read_register(R8, &reg_cont);
-        *ptr++ = highhex(R8);
-        *ptr++ = lowhex(R8);
+        ptr = pack_hex_byte(R8);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
         *ptr++ = ';';
 
         read_register(SP, &reg_cont);
-        *ptr++ = highhex(SP);
-        *ptr++ = lowhex(SP);
+        ptr = pack_hex_byte(SP);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
         *ptr++ = ';';
 
         /* Send ERP as well; this will save us an entire register fetch in some cases. */
         read_register(ERP, &reg_cont);
-        *ptr++ = highhex(ERP);
-        *ptr++ = lowhex(ERP);
+        ptr = pack_hex_byte(ERP);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
         *ptr++ = ';';
@@ -1533,8 +1499,8 @@ handle_exception(int sigval)
                                    Success: SAA, where AA is the signal number.
                                    Failure: void. */
                                 output_buffer[0] = 'S';
-                                output_buffer[1] = highhex(sigval);
-                                output_buffer[2] = lowhex(sigval);
+                                output_buffer[1] = hex_asc_hi(sigval);
+                                output_buffer[2] = hex_asc_lo(sigval);
                                 output_buffer[3] = 0;
                                 break;
 
diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c
index 5a9ac5834647..8a34b8b74293 100644
--- a/arch/cris/arch-v32/mm/init.c
+++ b/arch/cris/arch-v32/mm/init.c
@@ -162,7 +162,7 @@ paging_init(void)
          * substantially higher than 0, like us (we start at PAGE_OFFSET). This
          * saves space in the mem_map page array.
          */
-        free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+        free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
 
         mem_map = contig_page_data.node_mem_map;
 }
diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c
index 44f7b4f79476..9aa571169bcc 100644
--- a/arch/cris/kernel/profile.c
+++ b/arch/cris/kernel/profile.c
@@ -35,19 +35,16 @@ read_cris_profile(struct file *file, char __user *buf,
                   size_t count, loff_t *ppos)
 {
         unsigned long p = *ppos;
+        ssize_t ret;
 
-        if (p > SAMPLE_BUFFER_SIZE)
-                return 0;
+        ret = simple_read_from_buffer(buf, count, ppos, sample_buffer,
+                                                SAMPLE_BUFFER_SIZE);
+        if (ret < 0)
+                return ret;
 
-        if (p + count > SAMPLE_BUFFER_SIZE)
-                count = SAMPLE_BUFFER_SIZE - p;
-        if (copy_to_user(buf, sample_buffer + p,count))
-                return -EFAULT;
+        memset(sample_buffer + p, 0, ret);
 
-        memset(sample_buffer + p, 0, count);
-        *ppos += count;
-
-        return count;
+        return ret;
 }
 
 static ssize_t
diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
index 5b06ffa15e34..2fdd212eb250 100644
--- a/arch/cris/mm/init.c
+++ b/arch/cris/mm/init.c
@@ -19,36 +19,6 @@ unsigned long empty_zero_page;
 extern char _stext, _edata, _etext; /* From linkerscript */
 extern char __init_begin, __init_end;
 
-void 
-show_mem(void)
-{
-        int i,free = 0,total = 0,cached = 0, reserved = 0, nonshared = 0;
-        int shared = 0;
-
-        printk("\nMem-info:\n");
-        show_free_areas();
-        i = max_mapnr;
-        while (i-- > 0) {
-                total++;
-                if (PageReserved(mem_map+i))
-                        reserved++;
-                else if (PageSwapCache(mem_map+i))
-                        cached++;
-                else if (!page_count(mem_map+i))
-                        free++;
-                else if (page_count(mem_map+i) == 1)
-                        nonshared++;
-                else
-                        shared += page_count(mem_map+i) - 1;
-        }
-        printk("%d pages of RAM\n",total);
-        printk("%d free pages\n",free);
-        printk("%d reserved pages\n",reserved);
-        printk("%d pages nonshared\n",nonshared);
-        printk("%d pages shared\n",shared);
-        printk("%d pages swap cached\n",cached);
-}
-
 void __init
 mem_init(void)
 {
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 48a0393e7cee..7ca8a6b19ac9 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -182,8 +182,6 @@ extern volatile u32 __attribute__((section(".bss"))) gdbstub_trace_through_excep
 static char     input_buffer[BUFMAX];
 static char     output_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 static const char *regnames[] = {
         "PSR ", "ISR ", "CCR ", "CCCR",
         "LR  ", "LCR ", "PC  ", "_stt",
@@ -383,8 +381,8 @@ static int gdbstub_send_packet(char *buffer)
                 }
 
                 gdbstub_tx_char('#');
-                gdbstub_tx_char(hexchars[checksum >> 4]);
-                gdbstub_tx_char(hexchars[checksum & 0xf]);
+                gdbstub_tx_char(hex_asc_hi(checksum));
+                gdbstub_tx_char(hex_asc_lo(checksum));
 
         } while (gdbstub_rx_char(&ch,0),
 #ifdef GDBSTUB_DEBUG_PROTOCOL
@@ -674,8 +672,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
         if ((uint32_t)mem&1 && count>=1) {
                 if (!gdbstub_read_byte(mem,ch))
                         return NULL;
-                *buf++ = hexchars[ch[0] >> 4];
-                *buf++ = hexchars[ch[0] & 0xf];
+                buf = pack_hex_byte(buf, ch[0]);
                 mem++;
                 count--;
         }
@@ -683,10 +680,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
         if ((uint32_t)mem&3 && count>=2) {
                 if (!gdbstub_read_word(mem,(uint16_t *)ch))
                         return NULL;
-                *buf++ = hexchars[ch[0] >> 4];
-                *buf++ = hexchars[ch[0] & 0xf];
-                *buf++ = hexchars[ch[1] >> 4];
-                *buf++ = hexchars[ch[1] & 0xf];
+                buf = pack_hex_byte(buf, ch[0]);
+                buf = pack_hex_byte(buf, ch[1]);
                 mem += 2;
                 count -= 2;
         }
@@ -694,14 +689,10 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
         while (count>=4) {
                 if (!gdbstub_read_dword(mem,(uint32_t *)ch))
                         return NULL;
-                *buf++ = hexchars[ch[0] >> 4];
-                *buf++ = hexchars[ch[0] & 0xf];
-                *buf++ = hexchars[ch[1] >> 4];
-                *buf++ = hexchars[ch[1] & 0xf];
-                *buf++ = hexchars[ch[2] >> 4];
-                *buf++ = hexchars[ch[2] & 0xf];
-                *buf++ = hexchars[ch[3] >> 4];
-                *buf++ = hexchars[ch[3] & 0xf];
+                buf = pack_hex_byte(buf, ch[0]);
+                buf = pack_hex_byte(buf, ch[1]);
+                buf = pack_hex_byte(buf, ch[2]);
+                buf = pack_hex_byte(buf, ch[3]);
                 mem += 4;
                 count -= 4;
         }
@@ -709,10 +700,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
         if (count>=2) {
                 if (!gdbstub_read_word(mem,(uint16_t *)ch))
                         return NULL;
-                *buf++ = hexchars[ch[0] >> 4];
-                *buf++ = hexchars[ch[0] & 0xf];
-                *buf++ = hexchars[ch[1] >> 4];
-                *buf++ = hexchars[ch[1] & 0xf];
+                buf = pack_hex_byte(buf, ch[0]);
+                buf = pack_hex_byte(buf, ch[1]);
                 mem += 2;
                 count -= 2;
         }
@@ -720,8 +709,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
         if (count>=1) {
                 if (!gdbstub_read_byte(mem,ch))
                         return NULL;
-                *buf++ = hexchars[ch[0] >> 4];
-                *buf++ = hexchars[ch[0] & 0xf];
+                buf = pack_hex_byte(buf, ch[0]);
         }
 
         *buf = 0;
@@ -1471,22 +1459,22 @@ void gdbstub(int sigval)
                 *ptr++ = 'O';
                 ptr = mem2hex(title, ptr, sizeof(title) - 1,0);
 
-                hx = hexchars[(brr & 0xf0000000) >> 28];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(brr & 0x0f000000) >> 24];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(brr & 0x00f00000) >> 20];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(brr & 0x000f0000) >> 16];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(brr & 0x0000f000) >> 12];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(brr & 0x00000f00) >> 8];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(brr & 0x000000f0) >> 4];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(brr & 0x0000000f)];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+                hx = hex_asc_hi(brr >> 24);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_lo(brr >> 24);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_hi(brr >> 16);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_lo(brr >> 16);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_hi(brr >> 8);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_lo(brr >> 8);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_hi(brr);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_lo(brr);
+                ptr = pack_hex_byte(ptr, hx);
 
                 ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
                 *ptr = 0;
@@ -1500,12 +1488,10 @@ void gdbstub(int sigval)
 
         /* Send trap type (converted to signal) */
         *ptr++ = 'T';
-        *ptr++ = hexchars[sigval >> 4];
-        *ptr++ = hexchars[sigval & 0xf];
+        ptr = pack_hex_byte(ptr, sigval);
 
         /* Send Error PC */
-        *ptr++ = hexchars[GDB_REG_PC >> 4];
-        *ptr++ = hexchars[GDB_REG_PC & 0xf];
+        ptr = pack_hex_byte(ptr, GDB_REG_PC);
         *ptr++ = ':';
         ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0);
         *ptr++ = ';';
@@ -1513,8 +1499,7 @@ void gdbstub(int sigval)
         /*
          * Send frame pointer
          */
-        *ptr++ = hexchars[GDB_REG_FP >> 4];
-        *ptr++ = hexchars[GDB_REG_FP & 0xf];
+        ptr = pack_hex_byte(ptr, GDB_REG_FP);
         *ptr++ = ':';
         ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0);
         *ptr++ = ';';
@@ -1522,8 +1507,7 @@ void gdbstub(int sigval)
         /*
          * Send stack pointer
          */
-        *ptr++ = hexchars[GDB_REG_SP >> 4];
-        *ptr++ = hexchars[GDB_REG_SP & 0xf];
+        ptr = pack_hex_byte(ptr, GDB_REG_SP);
         *ptr++ = ':';
         ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0);
         *ptr++ = ';';
@@ -1548,8 +1532,8 @@ void gdbstub(int sigval)
                         /* request repeat of last signal number */
                 case '?':
                         output_buffer[0] = 'S';
-                        output_buffer[1] = hexchars[sigval >> 4];
-                        output_buffer[2] = hexchars[sigval & 0xf];
+                        output_buffer[1] = hex_asc_hi(sigval);
+                        output_buffer[2] = hex_asc_lo(sigval);
                         output_buffer[3] = 0;
                         break;
 
@@ -2059,8 +2043,8 @@ void gdbstub_exit(int status)
         }
 
         gdbstub_tx_char('#');
-        gdbstub_tx_char(hexchars[checksum >> 4]);
-        gdbstub_tx_char(hexchars[checksum & 0xf]);
+        gdbstub_tx_char(hex_asc_hi(checksum));
+        gdbstub_tx_char(hex_asc_lo(checksum));
 
         /* make sure the output is flushed, or else RedBoot might clobber it */
         gdbstub_tx_char('-');
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index 73f3aeefd203..d1113c5031f5 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/sysctl.h>
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 9af7740f32fb..1b851db34186 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -63,37 +63,6 @@ EXPORT_SYMBOL(empty_zero_page);
 
 /*****************************************************************************/
 /*
- *
- */
-void show_mem(void)
-{
-        unsigned long i;
-        int free = 0, total = 0, reserved = 0, shared = 0;
-
-        printk("\nMem-info:\n");
-        show_free_areas();
-        i = max_mapnr;
-        while (i-- > 0) {
-                struct page *page = &mem_map[i];
-
-                total++;
-                if (PageReserved(page))
-                        reserved++;
-                else if (!page_count(page))
-                        free++;
-                else
-                        shared += page_count(page) - 1;
-        }
-
-        printk("%d pages of RAM\n",total);
-        printk("%d free pages\n",free);
-        printk("%d reserved pages\n",reserved);
-        printk("%d pages shared\n",shared);
-
-} /* end show_mem() */
-
-/*****************************************************************************/
-/*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
  * The parameters are pointers to where to stick the starting and ending
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 085dc6ec152b..396ab059efa3 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -203,20 +203,6 @@ config UNIX98_PTYS
           Read the instructions in <file:Documentation/Changes> pertaining to
           pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-        int "Maximum number of Unix98 PTYs in use (0-2048)"
-        depends on UNIX98_PTYS
-        default "256"
-        help
-          The maximum number of Unix98 PTYs that can be used at any one time.
-          The default is 256, and should be enough for desktop systems. Server
-          machines which support incoming telnet/rlogin/ssh connections and/or
-          serve several X terminals may want to increase this: every incoming
-          connection and every xterm uses up one PTY.
-
-          When not in use, each additional set of 256 PTYs occupy
-          approximately 8 KB of kernel memory on 32-bit architectures.
-
 source "drivers/char/pcmcia/Kconfig"
 
 source "drivers/serial/Kconfig"
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
index 845074588af0..51ab6cbd030f 100644
--- a/arch/h8300/boot/compressed/misc.c
+++ b/arch/h8300/boot/compressed/misc.c
@@ -67,8 +67,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -77,11 +75,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -98,38 +92,6 @@ static unsigned long free_mem_end_ptr;
 #define TDR *((volatile unsigned char *)0xffff8b)
 #define SSR *((volatile unsigned char *)0xffff8c)
 
-static void *malloc(int size)
-{
-        void *p;
-
-        if (size <0) error("Malloc error");
-        if (free_mem_ptr == 0) error("Memory error");
-
-        free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
-        p = (void *)free_mem_ptr;
-        free_mem_ptr += size;
-
-        if (free_mem_ptr >= free_mem_end_ptr)
-                error("Out of memory");
-
-        return p;
-}
-
-static void free(void *where)
-{       /* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-        *ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-        free_mem_ptr = (long) *ptr;
-}
-
 int puts(const char *s)
 {
         return 0;
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index b1f25c20a5db..7fda657110eb 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/fb.h>
 #include <linux/console.h>
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index e4f4199f97ab..a1d228f5e4e6 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -64,33 +64,6 @@ unsigned long empty_zero_page;
 
 extern unsigned long rom_length;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk("\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-        total++;
-        if (PageReserved(mem_map+i))
-            reserved++;
-        else if (PageSwapCache(mem_map+i))
-            cached++;
-        else if (!page_count(mem_map+i))
-            free++;
-        else
-            shared += page_count(mem_map+i) - 1;
-    }
-    printk("%d pages of RAM\n",total);
-    printk("%d free pages\n",free);
-    printk("%d reserved pages\n",reserved);
-    printk("%d pages shared\n",shared);
-    printk("%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 18bcc10903b4..451f2ffb137b 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -540,8 +540,8 @@ config KEXEC
           strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-          bool "kernel crash dumps (EXPERIMENTAL)"
-          depends on EXPERIMENTAL && IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+          bool "kernel crash dumps"
+          depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
           help
             Generate crash dump after being started by kexec.
 
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index e67ee3f27698..905d25b13d5a 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -100,3 +100,9 @@ define archhelp
   echo '  boot          - Build vmlinux and bootloader for Ski simulator'
   echo '* unwcheck      - Check vmlinux for invalid unwind info'
 endef
+
+archprepare: make_nr_irqs_h FORCE
+PHONY += make_nr_irqs_h FORCE
+
+make_nr_irqs_h: FORCE
+        $(Q)$(MAKE) $(build)=arch/ia64/kernel include/asm-ia64/nr-irqs.h
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 1c44ec2a1d58..88b6e6f3fd88 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -186,9 +186,10 @@ hwsw_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-hwsw_dma_mapping_error (dma_addr_t dma_addr)
+hwsw_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-        return hwiommu_dma_mapping_error (dma_addr) || swiotlb_dma_mapping_error(dma_addr);
+        return hwiommu_dma_mapping_error(dev, dma_addr) ||
+                swiotlb_dma_mapping_error(dev, dma_addr);
 }
 
 EXPORT_SYMBOL(hwsw_dma_mapping_error);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 34421aed1e2a..4956be40d7b5 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2147,7 +2147,7 @@ sba_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-sba_dma_mapping_error (dma_addr_t dma_addr)
+sba_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
         return 0;
 }
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 23cafc80d2a4..24b1ad5334cb 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -193,18 +193,6 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
  * -------------------------------------------------------------------
  */
 
-#if 0
-/*
- * not really used in our situation so keep them commented out for now
- */
-static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */
-static void do_serial_bh(void)
-{
-        run_task_queue(&tq_serial);
-        printk(KERN_ERR "do_serial_bh: called\n");
-}
-#endif
-
 static void do_softint(struct work_struct *private_)
 {
         printk(KERN_ERR "simserial: do_softint called\n");
@@ -351,11 +339,7 @@ static void rs_flush_buffer(struct tty_struct *tty)
         info->xmit.head = info->xmit.tail = 0;
         local_irq_restore(flags);
 
-        wake_up_interruptible(&tty->write_wait);
-
-        if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-            tty->ldisc.write_wakeup)
-                (tty->ldisc.write_wakeup)(tty);
+        tty_wakeup(tty);
 }
 
 /*
@@ -404,12 +388,6 @@ static void rs_unthrottle(struct tty_struct * tty)
         printk(KERN_INFO "simrs_unthrottle called\n");
 }
 
-/*
- * rs_break() --- routine which turns the break handling on or off
- */
-static void rs_break(struct tty_struct *tty, int break_state)
-{
-}
 
 static int rs_ioctl(struct tty_struct *tty, struct file * file,
                     unsigned int cmd, unsigned long arg)
@@ -422,14 +400,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
         }
 
         switch (cmd) {
-                case TIOCMGET:
-                        printk(KERN_INFO "rs_ioctl: TIOCMGET called\n");
-                        return -EINVAL;
-                case TIOCMBIS:
-                case TIOCMBIC:
-                case TIOCMSET:
-                        printk(KERN_INFO "rs_ioctl: TIOCMBIS/BIC/SET called\n");
-                        return -EINVAL;
                 case TIOCGSERIAL:
                         printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
                         return 0;
@@ -488,14 +458,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 
 static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
-        unsigned int cflag = tty->termios->c_cflag;
-
-        if (   (cflag == old_termios->c_cflag)
-            && (   RELEVANT_IFLAG(tty->termios->c_iflag)
-                == RELEVANT_IFLAG(old_termios->c_iflag)))
-          return;
-
-
         /* Handle turning off CRTSCTS */
         if ((old_termios->c_cflag & CRTSCTS) &&
             !(tty->termios->c_cflag & CRTSCTS)) {
@@ -623,9 +585,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
          * the line discipline to only process XON/XOFF characters.
          */
         shutdown(info);
-        if (tty->ops->flush_buffer)
-                tty->ops->flush_buffer(tty);
-        if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty);
+        rs_flush_buffer(tty);
+        tty_ldisc_flush(tty);
         info->event = 0;
         info->tty = NULL;
         if (info->blocked_open) {
@@ -955,7 +916,6 @@ static const struct tty_operations hp_ops = {
         .stop = rs_stop,
         .start = rs_start,
         .hangup = rs_hangup,
-        .break_ctl = rs_break,
         .wait_until_sent = rs_wait_until_sent,
         .read_proc = rs_read_proc,
 };
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 7e028ceb93ba..465116aecb85 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1139,7 +1139,7 @@ sys32_pipe (int __user *fd)
         int retval;
         int fds[2];
 
-        retval = do_pipe(fds);
+        retval = do_pipe_flags(fds, 0);
         if (retval)
                 goto out;
         if (copy_to_user(fd, fds, sizeof(fds)))
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 13fd10e8699e..87fea11aecb7 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -36,6 +36,8 @@ obj-$(CONFIG_PCI_MSI)		+= msi_ia64.o
 mca_recovery-y                  += mca_drv.o mca_drv_asm.o
 obj-$(CONFIG_IA64_MC_ERR_INJECT)+= err_inject.o
 
+obj-$(CONFIG_PARAVIRT)          += paravirt.o paravirtentry.o
+
 obj-$(CONFIG_IA64_ESI)          += esi.o
 ifneq ($(CONFIG_IA64_ESI),)
 obj-y                           += esi_stub.o   # must be in kernel proper
@@ -70,3 +72,45 @@ $(obj)/gate-syms.o: $(obj)/gate.lds $(obj)/gate.o FORCE
 # We must build gate.so before we can assemble it.
 # Note: kbuild does not track this dependency due to usage of .incbin
 $(obj)/gate-data.o: $(obj)/gate.so
+
+# Calculate NR_IRQ = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, ...) based on config
+define sed-y
+        "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"
+endef
+quiet_cmd_nr_irqs = GEN     $@
+define cmd_nr_irqs
+        (set -e; \
+         echo "#ifndef __ASM_NR_IRQS_H__"; \
+         echo "#define __ASM_NR_IRQS_H__"; \
+         echo "/*"; \
+         echo " * DO NOT MODIFY."; \
+         echo " *"; \
+         echo " * This file was generated by Kbuild"; \
+         echo " *"; \
+         echo " */"; \
+         echo ""; \
+         sed -ne $(sed-y) $<; \
+         echo ""; \
+         echo "#endif" ) > $@
+endef
+
+# We use internal kbuild rules to avoid the "is up to date" message from make
+arch/$(SRCARCH)/kernel/nr-irqs.s: $(srctree)/arch/$(SRCARCH)/kernel/nr-irqs.c \
+                                $(wildcard $(srctree)/include/asm-ia64/*/irq.h)
+        $(Q)mkdir -p $(dir $@)
+        $(call if_changed_dep,cc_s_c)
+
+include/asm-ia64/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s
+        $(Q)mkdir -p $(dir $@)
+        $(call cmd,nr_irqs)
+
+clean-files += $(objtree)/include/asm-ia64/nr-irqs.h
+
+#
+# native ivt.S and entry.S
+#
+ASM_PARAVIRT_OBJS = ivt.o entry.o
+define paravirtualized_native
+AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_NATIVE
+endef
+$(foreach obj,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_native,$(obj))))
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 43687cc60dfb..5d1eb7ee2bf6 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -774,7 +774,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 static
-int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid)
+int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
         int pxm_id;
@@ -854,8 +854,7 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu)
         union acpi_object *obj;
         struct acpi_madt_local_sapic *lsapic;
         cpumask_t tmp_map;
-        long physid;
-        int cpu;
+        int cpu, physid;
 
         if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
                 return -EINVAL;
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
index b8498ea62068..7b435451b3dc 100644
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
@@ -51,7 +51,7 @@ processor_set_pstate (
         retval = ia64_pal_set_pstate((u64)value);
 
         if (retval) {
-                dprintk("Failed to set freq to 0x%x, with error 0x%x\n",
+                dprintk("Failed to set freq to 0x%x, with error 0x%lx\n",
                         value, retval);
                 return -ENODEV;
         }
@@ -74,7 +74,7 @@ processor_get_pstate (
 
         if (retval)
                 dprintk("Failed to get current freq with "
-                        "error 0x%x, idx 0x%x\n", retval, *value);
+                        "error 0x%lx, idx 0x%x\n", retval, *value);
 
         return (int)retval;
 }
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index ca2bb95726de..0dd6c1419d8d 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -23,6 +23,11 @@
  * 11/07/2000
  */
 /*
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *                    pv_ops.
+ */
+/*
  * Global (preserved) predicate usage on syscall entry/exit path:
  *
  *      pKStk:          See entry.h.
@@ -45,6 +50,7 @@
 
 #include "minstate.h"
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
         /*
          * execve() is special because in case of success, we need to
          * setup a null register window frame.
@@ -173,6 +179,7 @@ GLOBAL_ENTRY(sys_clone)
         mov rp=loc0
         br.ret.sptk.many rp
 END(sys_clone)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
 
 /*
  * prev_task <- ia64_switch_to(struct task_struct *next)
@@ -180,7 +187,7 @@ END(sys_clone)
  *      called.  The code starting at .map relies on this.  The rest of the code
  *      doesn't care about the interrupt masking status.
  */
-GLOBAL_ENTRY(ia64_switch_to)
+GLOBAL_ENTRY(__paravirt_switch_to)
         .prologue
         alloc r16=ar.pfs,1,0,0,0
         DO_SAVE_SWITCH_STACK
@@ -204,7 +211,7 @@ GLOBAL_ENTRY(ia64_switch_to)
         ;;
 .done:
         ld8 sp=[r21]                    // load kernel stack pointer of new task
-        mov IA64_KR(CURRENT)=in0        // update "current" application register
+        MOV_TO_KR(CURRENT, in0, r8, r9)         // update "current" application register
         mov r8=r13                      // return pointer to previously running task
         mov r13=in0                     // set "current" pointer
         ;;
@@ -216,26 +223,25 @@ GLOBAL_ENTRY(ia64_switch_to)
         br.ret.sptk.many rp             // boogie on out in new context
 
 .map:
-        rsm psr.ic                      // interrupts (psr.i) are already disabled here
+        RSM_PSR_IC(r25)                 // interrupts (psr.i) are already disabled here
         movl r25=PAGE_KERNEL
         ;;
         srlz.d
         or r23=r25,r20                  // construct PA | page properties
         mov r25=IA64_GRANULE_SHIFT<<2
         ;;
-        mov cr.itir=r25
-        mov cr.ifa=in0                  // VA of next task...
+        MOV_TO_ITIR(p0, r25, r8)
+        MOV_TO_IFA(in0, r8)             // VA of next task...
         ;;
         mov r25=IA64_TR_CURRENT_STACK
-        mov IA64_KR(CURRENT_STACK)=r26  // remember last page we mapped...
+        MOV_TO_KR(CURRENT_STACK, r26, r8, r9)   // remember last page we mapped...
         ;;
         itr.d dtr[r25]=r23              // wire in new mapping...
-        ssm psr.ic                      // reenable the psr.ic bit
-        ;;
-        srlz.d
+        SSM_PSR_IC_AND_SRLZ_D(r8, r9)   // reenable the psr.ic bit
         br.cond.sptk .done
-END(ia64_switch_to)
+END(__paravirt_switch_to)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 /*
  * Note that interrupts are enabled during save_switch_stack and load_switch_stack.  This
  * means that we may get an interrupt with "sp" pointing to the new kernel stack while
@@ -375,7 +381,7 @@ END(save_switch_stack)
  *      - b7 holds address to return to
  *      - must not touch r8-r11
  */
-ENTRY(load_switch_stack)
+GLOBAL_ENTRY(load_switch_stack)
         .prologue
         .altrp b7
 
@@ -571,7 +577,7 @@ GLOBAL_ENTRY(ia64_trace_syscall)
 .ret3:
 (pUStk) cmp.eq.unc p6,p0=r0,r0                  // p6 <- pUStk
 (pUStk) rsm psr.i                               // disable interrupts
-        br.cond.sptk .work_pending_syscall_end
+        br.cond.sptk ia64_work_pending_syscall_end
 
 strace_error:
         ld8 r3=[r2]                             // load pt_regs.r8
@@ -636,8 +642,17 @@ GLOBAL_ENTRY(ia64_ret_from_syscall)
         adds r2=PT(R8)+16,sp                    // r2 = &pt_regs.r8
         mov r10=r0                              // clear error indication in r10
 (p7)    br.cond.spnt handle_syscall_error       // handle potential syscall failure
+#ifdef CONFIG_PARAVIRT
+        ;;
+        br.cond.sptk.few ia64_leave_syscall
+        ;;
+#endif /* CONFIG_PARAVIRT */
 END(ia64_ret_from_syscall)
+#ifndef CONFIG_PARAVIRT
         // fall through
+#endif
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
+
 /*
  * ia64_leave_syscall(): Same as ia64_leave_kernel, except that it doesn't
  *      need to switch to bank 0 and doesn't restore the scratch registers.
@@ -682,7 +697,7 @@ END(ia64_ret_from_syscall)
  *            ar.csd: cleared
  *            ar.ssd: cleared
  */
-ENTRY(ia64_leave_syscall)
+GLOBAL_ENTRY(__paravirt_leave_syscall)
         PT_REGS_UNWIND_INFO(0)
         /*
          * work.need_resched etc. mustn't get changed by this CPU before it returns to
@@ -692,11 +707,11 @@ ENTRY(ia64_leave_syscall)
          * extra work.  We always check for extra work when returning to user-level.
          * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
          * is 0.  After extra work processing has been completed, execution
-         * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
+         * resumes at ia64_work_processed_syscall with p6 set to 1 if the extra-work-check
          * needs to be redone.
          */
 #ifdef CONFIG_PREEMPT
-        rsm psr.i                               // disable interrupts
+        RSM_PSR_I(p0, r2, r18)                  // disable interrupts
         cmp.eq pLvSys,p0=r0,r0                  // pLvSys=1: leave from syscall
 (pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
         ;;
@@ -706,11 +721,12 @@ ENTRY(ia64_leave_syscall)
         ;;
         cmp.eq p6,p0=r21,r0             // p6 <- pUStk || (preempt_count == 0)
 #else /* !CONFIG_PREEMPT */
-(pUStk) rsm psr.i
+        RSM_PSR_I(pUStk, r2, r18)
         cmp.eq pLvSys,p0=r0,r0          // pLvSys=1: leave from syscall
 (pUStk) cmp.eq.unc p6,p0=r0,r0          // p6 <- pUStk
 #endif
-.work_processed_syscall:
+.global __paravirt_work_processed_syscall;
+__paravirt_work_processed_syscall:
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
         adds r2=PT(LOADRS)+16,r12
 (pUStk) mov.m r22=ar.itc                        // fetch time at leave
@@ -744,7 +760,7 @@ ENTRY(ia64_leave_syscall)
 (pNonSys) break 0               //      bug check: we shouldn't be here if pNonSys is TRUE!
         ;;
         invala                  // M0|1 invalidate ALAT
-        rsm psr.i | psr.ic      // M2   turn off interrupts and interruption collection
+        RSM_PSR_I_IC(r28, r29, r30)     // M2   turn off interrupts and interruption collection
         cmp.eq p9,p0=r0,r0      // A    set p9 to indicate that we should restore cr.ifs
 
         ld8 r29=[r2],16         // M0|1 load cr.ipsr
@@ -765,7 +781,7 @@ ENTRY(ia64_leave_syscall)
         ;;
 #endif
         ld8 r26=[r2],PT(B0)-PT(AR_PFS)  // M0|1 load ar.pfs
-(pKStk) mov r22=psr                     // M2   read PSR now that interrupts are disabled
+        MOV_FROM_PSR(pKStk, r22, r21)   // M2   read PSR now that interrupts are disabled
         nop 0
         ;;
         ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
@@ -798,7 +814,7 @@ ENTRY(ia64_leave_syscall)
 
         srlz.d                          // M0   ensure interruption collection is off (for cover)
         shr.u r18=r19,16                // I0|1 get byte size of existing "dirty" partition
-        cover                           // B    add current frame into dirty partition & set cr.ifs
+        COVER                           // B    add current frame into dirty partition & set cr.ifs
         ;;
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
         mov r19=ar.bsp                  // M2   get new backing store pointer
@@ -823,8 +839,9 @@ ENTRY(ia64_leave_syscall)
         mov.m ar.ssd=r0                 // M2   clear ar.ssd
         mov f11=f0                      // F    clear f11
         br.cond.sptk.many rbs_switch    // B
-END(ia64_leave_syscall)
+END(__paravirt_leave_syscall)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 #ifdef CONFIG_IA32_SUPPORT
 GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
         PT_REGS_UNWIND_INFO(0)
@@ -835,10 +852,20 @@ GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
         st8.spill [r2]=r8       // store return value in slot for r8 and set unat bit
         .mem.offset 8,0
         st8.spill [r3]=r0       // clear error indication in slot for r10 and set unat bit
+#ifdef CONFIG_PARAVIRT
+        ;;
+        // don't fall through, ia64_leave_kernel may be #define'd
+        br.cond.sptk.few ia64_leave_kernel
+        ;;
+#endif /* CONFIG_PARAVIRT */
 END(ia64_ret_from_ia32_execve)
+#ifndef CONFIG_PARAVIRT
         // fall through
+#endif
 #endif /* CONFIG_IA32_SUPPORT */
-GLOBAL_ENTRY(ia64_leave_kernel)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
+
+GLOBAL_ENTRY(__paravirt_leave_kernel)
         PT_REGS_UNWIND_INFO(0)
         /*
          * work.need_resched etc. mustn't get changed by this CPU before it returns to
@@ -852,7 +879,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
          * needs to be redone.
          */
 #ifdef CONFIG_PREEMPT
-        rsm psr.i                               // disable interrupts
+        RSM_PSR_I(p0, r17, r31)                 // disable interrupts
         cmp.eq p0,pLvSys=r0,r0                  // pLvSys=0: leave from kernel
 (pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
         ;;
@@ -862,7 +889,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
         ;;
         cmp.eq p6,p0=r21,r0             // p6 <- pUStk || (preempt_count == 0)
 #else
-(pUStk) rsm psr.i
+        RSM_PSR_I(pUStk, r17, r31)
         cmp.eq p0,pLvSys=r0,r0          // pLvSys=0: leave from kernel
 (pUStk) cmp.eq.unc p6,p0=r0,r0          // p6 <- pUStk
 #endif
@@ -910,7 +937,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
         mov ar.csd=r30
         mov ar.ssd=r31
         ;;
-        rsm psr.i | psr.ic      // initiate turning off of interrupt and interruption collection
+        RSM_PSR_I_IC(r23, r22, r25)     // initiate turning off of interrupt and interruption collection
         invala                  // invalidate ALAT
         ;;
         ld8.fill r22=[r2],24
@@ -942,7 +969,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
         mov ar.ccv=r15
         ;;
         ldf.fill f11=[r2]
-        bsw.0                   // switch back to bank 0 (no stop bit required beforehand...)
+        BSW_0(r2, r3, r15)      // switch back to bank 0 (no stop bit required beforehand...)
         ;;
 (pUStk) mov r18=IA64_KR(CURRENT)// M2 (12 cycle read latency)
         adds r16=PT(CR_IPSR)+16,r12
@@ -950,12 +977,12 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
         .pred.rel.mutex pUStk,pKStk
-(pKStk) mov r22=psr             // M2 read PSR now that interrupts are disabled
+        MOV_FROM_PSR(pKStk, r22, r29)   // M2 read PSR now that interrupts are disabled
 (pUStk) mov.m r22=ar.itc        // M  fetch time at leave
         nop.i 0
         ;;
 #else
-(pKStk) mov r22=psr             // M2 read PSR now that interrupts are disabled
+        MOV_FROM_PSR(pKStk, r22, r29)   // M2 read PSR now that interrupts are disabled
         nop.i 0
         nop.i 0
         ;;
@@ -1027,7 +1054,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
          * NOTE: alloc, loadrs, and cover can't be predicated.
          */
 (pNonSys) br.cond.dpnt dont_preserve_current_frame
-        cover                           // add current frame into dirty partition and set cr.ifs
+        COVER                           // add current frame into dirty partition and set cr.ifs
         ;;
         mov r19=ar.bsp                  // get new backing store pointer
 rbs_switch:
@@ -1130,16 +1157,16 @@ skip_rbs_switch:
 (pKStk) dep r29=r22,r29,21,1    // I0 update ipsr.pp with psr.pp
 (pLvSys)mov r16=r0              // A  clear r16 for leave_syscall, no-op otherwise
         ;;
-        mov cr.ipsr=r29         // M2
+        MOV_TO_IPSR(p0, r29, r25)       // M2
         mov ar.pfs=r26          // I0
 (pLvSys)mov r17=r0              // A  clear r17 for leave_syscall, no-op otherwise
 
-(p9)    mov cr.ifs=r30          // M2
+        MOV_TO_IFS(p9, r30, r25)// M2
         mov b0=r21              // I0
 (pLvSys)mov r18=r0              // A  clear r18 for leave_syscall, no-op otherwise
 
         mov ar.fpsr=r20         // M2
-        mov cr.iip=r28          // M2
+        MOV_TO_IIP(r28, r25)    // M2
         nop 0
         ;;
 (pUStk) mov ar.rnat=r24         // M2 must happen with RSE in lazy mode
@@ -1148,7 +1175,7 @@ skip_rbs_switch:
 
         mov ar.rsc=r27          // M2
         mov pr=r31,-1           // I0
-        rfi                     // B
+        RFI                     // B
 
         /*
          * On entry:
@@ -1174,35 +1201,36 @@ skip_rbs_switch:
         ;;
 (pKStk) st4 [r20]=r21
 #endif
-        ssm psr.i               // enable interrupts
+        SSM_PSR_I(p0, p6, r2)   // enable interrupts
         br.call.spnt.many rp=schedule
 .ret9:  cmp.eq p6,p0=r0,r0      // p6 <- 1 (re-check)
-        rsm psr.i               // disable interrupts
+        RSM_PSR_I(p0, r2, r20)  // disable interrupts
         ;;
 #ifdef CONFIG_PREEMPT
 (pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
         ;;
 (pKStk) st4 [r20]=r0            // preempt_count() <- 0
 #endif
-(pLvSys)br.cond.sptk.few  .work_pending_syscall_end
+(pLvSys)br.cond.sptk.few  __paravirt_pending_syscall_end
         br.cond.sptk.many .work_processed_kernel
 
 .notify:
 (pUStk) br.call.spnt.many rp=notify_resume_user
 .ret10: cmp.ne p6,p0=r0,r0      // p6 <- 0 (don't re-check)
-(pLvSys)br.cond.sptk.few  .work_pending_syscall_end
+(pLvSys)br.cond.sptk.few  __paravirt_pending_syscall_end
         br.cond.sptk.many .work_processed_kernel
 
-.work_pending_syscall_end:
+.global __paravirt_pending_syscall_end;
+__paravirt_pending_syscall_end:
         adds r2=PT(R8)+16,r12
         adds r3=PT(R10)+16,r12
         ;;
         ld8 r8=[r2]
         ld8 r10=[r3]
-        br.cond.sptk.many .work_processed_syscall
-
-END(ia64_leave_kernel)
+        br.cond.sptk.many __paravirt_work_processed_syscall_target
+END(__paravirt_leave_kernel)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 ENTRY(handle_syscall_error)
         /*
          * Some system calls (e.g., ptrace, mmap) can return arbitrary values which could
@@ -1244,7 +1272,7 @@ END(ia64_invoke_schedule_tail)
          * We declare 8 input registers so the system call args get preserved,
          * in case we need to restart a system call.
          */
-ENTRY(notify_resume_user)
+GLOBAL_ENTRY(notify_resume_user)
         .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
         alloc loc1=ar.pfs,8,2,3,0 // preserve all eight input regs in case of syscall restart!
         mov r9=ar.unat
@@ -1306,7 +1334,7 @@ ENTRY(sys_rt_sigreturn)
         adds sp=16,sp
         ;;
         ld8 r9=[sp]                             // load new ar.unat
-        mov.sptk b7=r8,ia64_leave_kernel
+        mov.sptk b7=r8,ia64_native_leave_kernel
         ;;
         mov ar.unat=r9
         br.many b7
@@ -1663,5 +1691,12 @@ sys_call_table:
         data8 sys_timerfd_create                // 1310
         data8 sys_timerfd_settime
         data8 sys_timerfd_gettime
+        data8 sys_signalfd4
+        data8 sys_eventfd2
+        data8 sys_epoll_create1                 // 1315
+        data8 sys_dup3
+        data8 sys_pipe2
+        data8 sys_inotify_init1
 
         .org sys_call_table + 8*NR_syscalls     // guard against failures to increase NR_syscalls
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index b642648cc2ac..c539c689493b 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -55,7 +55,8 @@ static u64 resources[NR_CPUS];
 
 #define show(name)                                                      \
 static ssize_t                                                          \
-show_##name(struct sys_device *dev, char *buf)                          \
+show_##name(struct sys_device *dev, struct sysdev_attribute *attr,      \
+                char *buf)                                              \
 {                                                                       \
         u32 cpu=dev->id;                                                \
         return sprintf(buf, "%lx\n", name[cpu]);                        \
@@ -63,7 +64,8 @@ show_##name(struct sys_device *dev, char *buf)				\
 
 #define store(name)                                                     \
 static ssize_t                                                          \
-store_##name(struct sys_device *dev, const char *buf, size_t size)      \
+store_##name(struct sys_device *dev, struct sysdev_attribute *attr,     \
+                                        const char *buf, size_t size)   \
 {                                                                       \
         unsigned int cpu=dev->id;                                       \
         name[cpu] = simple_strtoull(buf, NULL, 16);                     \
@@ -76,7 +78,8 @@ show(call_start)
  * processor. The cpu number in driver is only used for storing data.
  */
 static ssize_t
-store_call_start(struct sys_device *dev, const char *buf, size_t size)
+store_call_start(struct sys_device *dev, struct sysdev_attribute *attr,
+                const char *buf, size_t size)
 {
         unsigned int cpu=dev->id;
         unsigned long call_start = simple_strtoull(buf, NULL, 16);
@@ -124,14 +127,16 @@ show(err_type_info)
 store(err_type_info)
 
 static ssize_t
-show_virtual_to_phys(struct sys_device *dev, char *buf)
+show_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+                        char *buf)
 {
         unsigned int cpu=dev->id;
         return sprintf(buf, "%lx\n", phys_addr[cpu]);
 }
 
 static ssize_t
-store_virtual_to_phys(struct sys_device *dev, const char *buf, size_t size)
+store_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+                        const char *buf, size_t size)
 {
         unsigned int cpu=dev->id;
         u64 virt_addr=simple_strtoull(buf, NULL, 16);
@@ -154,7 +159,8 @@ show(err_struct_info)
 store(err_struct_info)
 
 static ssize_t
-show_err_data_buffer(struct sys_device *dev, char *buf)
+show_err_data_buffer(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         unsigned int cpu=dev->id;
 
@@ -165,7 +171,9 @@ show_err_data_buffer(struct sys_device *dev, char *buf)
 }
 
 static ssize_t
-store_err_data_buffer(struct sys_device *dev, const char *buf, size_t size)
+store_err_data_buffer(struct sys_device *dev,
+                        struct sysdev_attribute *attr,
+                        const char *buf, size_t size)
 {
         unsigned int cpu=dev->id;
         int ret;
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index ddeab4e36fd5..db540e58c783 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -26,11 +26,14 @@
 #include <asm/mmu_context.h>
 #include <asm/asm-offsets.h>
 #include <asm/pal.h>
+#include <asm/paravirt.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/system.h>
 #include <asm/mca_asm.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define SAL_PSR_BITS_TO_SET                             \
@@ -367,6 +370,44 @@ start_ap:
         ;;
 (isBP)  st8 [r2]=r28            // save the address of the boot param area passed by the bootloader
 
+#ifdef CONFIG_PARAVIRT
+
+        movl r14=hypervisor_setup_hooks
+        movl r15=hypervisor_type
+        mov r16=num_hypervisor_hooks
+        ;;
+        ld8 r2=[r15]
+        ;;
+        cmp.ltu p7,p0=r2,r16    // array size check
+        shladd r8=r2,3,r14
+        ;;
+(p7)    ld8 r9=[r8]
+        ;;
+(p7)    mov b1=r9
+(p7)    cmp.ne.unc p7,p0=r9,r0  // no actual branch to NULL
+        ;;
+(p7)    br.call.sptk.many rp=b1
+
+        __INITDATA
+
+default_setup_hook = 0          // Currently nothing needs to be done.
+
+        .weak xen_setup_hook
+
+        .global hypervisor_type
+hypervisor_type:
+        data8           PARAVIRT_HYPERVISOR_TYPE_DEFAULT
+
+        // must have the same order with PARAVIRT_HYPERVISOR_TYPE_xxx
+
+hypervisor_setup_hooks:
+        data8           default_setup_hook
+        data8           xen_setup_hook
+num_hypervisor_hooks = (. - hypervisor_setup_hooks) / 8
+        .previous
+
+#endif
+
 #ifdef CONFIG_SMP
 (isAP)  br.call.sptk.many rp=start_secondary
 .ret0:
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 39752cdef6ff..3bc2fa64f87f 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -585,6 +585,15 @@ static inline int irq_is_shared (int irq)
         return (iosapic_intr_info[irq].count > 1);
 }
 
+struct irq_chip*
+ia64_native_iosapic_get_irq_chip(unsigned long trigger)
+{
+        if (trigger == IOSAPIC_EDGE)
+                return &irq_type_iosapic_edge;
+        else
+                return &irq_type_iosapic_level;
+}
+
 static int
 register_intr (unsigned int gsi, int irq, unsigned char delivery,
                unsigned long polarity, unsigned long trigger)
@@ -635,13 +644,10 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
         iosapic_intr_info[irq].dmode    = delivery;
         iosapic_intr_info[irq].trigger  = trigger;
 
-        if (trigger == IOSAPIC_EDGE)
-                irq_type = &irq_type_iosapic_edge;
-        else
-                irq_type = &irq_type_iosapic_level;
+        irq_type = iosapic_get_irq_chip(trigger);
 
         idesc = irq_desc + irq;
-        if (idesc->chip != irq_type) {
+        if (irq_type != NULL && idesc->chip != irq_type) {
                 if (idesc->chip != &no_irq_type)
                         printk(KERN_WARNING
                                "%s: changing vector %d from %s to %s\n",
@@ -974,6 +980,22 @@ iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
 }
 
 void __init
+ia64_native_iosapic_pcat_compat_init(void)
+{
+        if (pcat_compat) {
+                /*
+                 * Disable the compatibility mode interrupts (8259 style),
+                 * needs IN/OUT support enabled.
+                 */
+                printk(KERN_INFO
+                       "%s: Disabling PC-AT compatible 8259 interrupts\n",
+                       __func__);
+                outb(0xff, 0xA1);
+                outb(0xff, 0x21);
+        }
+}
+
+void __init
 iosapic_system_init (int system_pcat_compat)
 {
         int irq;
@@ -987,17 +1009,8 @@ iosapic_system_init (int system_pcat_compat)
         }
 
         pcat_compat = system_pcat_compat;
-        if (pcat_compat) {
-                /*
-                 * Disable the compatibility mode interrupts (8259 style),
-                 * needs IN/OUT support enabled.
-                 */
-                printk(KERN_INFO
-                       "%s: Disabling PC-AT compatible 8259 interrupts\n",
-                       __func__);
-                outb(0xff, 0xA1);
-                outb(0xff, 0x21);
-        }
+        if (pcat_compat)
+                iosapic_pcat_compat_init();
 }
 
 static inline int
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index 5538471e8d68..28d3d483db92 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -196,7 +196,7 @@ static void clear_irq_vector(int irq)
 }
 
 int
-assign_irq_vector (int irq)
+ia64_native_assign_irq_vector (int irq)
 {
         unsigned long flags;
         int vector, cpu;
@@ -222,7 +222,7 @@ assign_irq_vector (int irq)
 }
 
 void
-free_irq_vector (int vector)
+ia64_native_free_irq_vector (int vector)
 {
         if (vector < IA64_FIRST_DEVICE_VECTOR ||
             vector > IA64_LAST_DEVICE_VECTOR)
@@ -600,7 +600,6 @@ static irqreturn_t dummy_handler (int irq, void *dev_id)
 {
         BUG();
 }
-extern irqreturn_t handle_IPI (int irq, void *dev_id);
 
 static struct irqaction ipi_irqaction = {
         .handler =      handle_IPI,
@@ -623,7 +622,7 @@ static struct irqaction tlb_irqaction = {
 #endif
 
 void
-register_percpu_irq (ia64_vector vec, struct irqaction *action)
+ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action)
 {
         irq_desc_t *desc;
         unsigned int irq;
@@ -638,13 +637,21 @@ register_percpu_irq (ia64_vector vec, struct irqaction *action)
 }
 
 void __init
-init_IRQ (void)
+ia64_native_register_ipi(void)
 {
-        register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
 #ifdef CONFIG_SMP
         register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction);
         register_percpu_irq(IA64_IPI_RESCHEDULE, &resched_irqaction);
         register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, &tlb_irqaction);
+#endif
+}
+
+void __init
+init_IRQ (void)
+{
+        ia64_register_ipi();
+        register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
+#ifdef CONFIG_SMP
 #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)
         if (vector_domain_type != VECTOR_DOMAIN_NONE) {
                 BUG_ON(IA64_FIRST_DEVICE_VECTOR != IA64_IRQ_MOVE_VECTOR);
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 80b44ea052d7..c39627df3cde 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -12,6 +12,14 @@
  *
  * 00/08/23 Asit Mallick <asit.k.mallick@intel.com> TLB handling for SMP
  * 00/12/20 David Mosberger-Tang <davidm@hpl.hp.com> DTLB/ITLB handler now uses virtual PT.
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *      Dan Magenheimer <dan.magenheimer@hp.com>
+ *      Xen paravirtualization
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *                    pv_ops.
+ *      Yaozu (Eddie) Dong <eddie.dong@intel.com>
  */
 /*
  * This file defines the interruption vector table used by the CPU.
@@ -102,13 +110,13 @@ ENTRY(vhpt_miss)
          *      - the faulting virtual address uses unimplemented address bits
          *      - the faulting virtual address has no valid page table mapping
          */
-        mov r16=cr.ifa                          // get address that caused the TLB miss
+        MOV_FROM_IFA(r16)                       // get address that caused the TLB miss
 #ifdef CONFIG_HUGETLB_PAGE
         movl r18=PAGE_SHIFT
-        mov r25=cr.itir
+        MOV_FROM_ITIR(r25)
 #endif
         ;;
-        rsm psr.dt                              // use physical addressing for data
+        RSM_PSR_DT                              // use physical addressing for data
         mov r31=pr                              // save the predicate registers
         mov r19=IA64_KR(PT_BASE)                // get page table base address
         shl r21=r16,3                           // shift bit 60 into sign bit
@@ -168,21 +176,21 @@ ENTRY(vhpt_miss)
         dep r21=r19,r20,3,(PAGE_SHIFT-3)        // r21=pte_offset(pmd,addr)
         ;;
 (p7)    ld8 r18=[r21]                           // read *pte
-        mov r19=cr.isr                          // cr.isr bit 32 tells us if this is an insn miss
+        MOV_FROM_ISR(r19)                       // cr.isr bit 32 tells us if this is an insn miss
         ;;
 (p7)    tbit.z p6,p7=r18,_PAGE_P_BIT            // page present bit cleared?
-        mov r22=cr.iha                          // get the VHPT address that caused the TLB miss
+        MOV_FROM_IHA(r22)                       // get the VHPT address that caused the TLB miss
         ;;                                      // avoid RAW on p7
 (p7)    tbit.nz.unc p10,p11=r19,32              // is it an instruction TLB miss?
         dep r23=0,r20,0,PAGE_SHIFT              // clear low bits to get page address
         ;;
-(p10)   itc.i r18                               // insert the instruction TLB entry
-(p11)   itc.d r18                               // insert the data TLB entry
+        ITC_I_AND_D(p10, p11, r18, r24)         // insert the instruction TLB entry and
+                                                // insert the data TLB entry
 (p6)    br.cond.spnt.many page_fault            // handle bad address/page not present (page fault)
-        mov cr.ifa=r22
+        MOV_TO_IFA(r22, r24)
 
 #ifdef CONFIG_HUGETLB_PAGE
-(p8)    mov cr.itir=r25                         // change to default page-size for VHPT
+        MOV_TO_ITIR(p8, r25, r24)               // change to default page-size for VHPT
 #endif
 
         /*
@@ -192,7 +200,7 @@ ENTRY(vhpt_miss)
          */
         adds r24=__DIRTY_BITS_NO_ED|_PAGE_PL_0|_PAGE_AR_RW,r23
         ;;
-(p7)    itc.d r24
+        ITC_D(p7, r24, r25)
         ;;
 #ifdef CONFIG_SMP
         /*
@@ -234,7 +242,7 @@ ENTRY(vhpt_miss)
 #endif
 
         mov pr=r31,-1                           // restore predicate registers
-        rfi
+        RFI
 END(vhpt_miss)
 
         .org ia64_ivt+0x400
@@ -248,11 +256,11 @@ ENTRY(itlb_miss)
          * mode, walk the page table, and then re-execute the PTE read and
          * go on normally after that.
          */
-        mov r16=cr.ifa                          // get virtual address
+        MOV_FROM_IFA(r16)                       // get virtual address
         mov r29=b0                              // save b0
         mov r31=pr                              // save predicates
 .itlb_fault:
-        mov r17=cr.iha                          // get virtual address of PTE
+        MOV_FROM_IHA(r17)                       // get virtual address of PTE
         movl r30=1f                             // load nested fault continuation point
         ;;
 1:      ld8 r18=[r17]                           // read *pte
@@ -261,7 +269,7 @@ ENTRY(itlb_miss)
         tbit.z p6,p0=r18,_PAGE_P_BIT            // page present bit cleared?
 (p6)    br.cond.spnt page_fault
         ;;
-        itc.i r18
+        ITC_I(p0, r18, r19)
         ;;
 #ifdef CONFIG_SMP
         /*
@@ -278,7 +286,7 @@ ENTRY(itlb_miss)
 (p7)    ptc.l r16,r20
 #endif
         mov pr=r31,-1
-        rfi
+        RFI
 END(itlb_miss)
 
         .org ia64_ivt+0x0800
@@ -292,11 +300,11 @@ ENTRY(dtlb_miss)
          * mode, walk the page table, and then re-execute the PTE read and
          * go on normally after that.
          */
-        mov r16=cr.ifa                          // get virtual address
+        MOV_FROM_IFA(r16)                       // get virtual address
         mov r29=b0                              // save b0
         mov r31=pr                              // save predicates
 dtlb_fault:
-        mov r17=cr.iha                          // get virtual address of PTE
+        MOV_FROM_IHA(r17)                       // get virtual address of PTE
         movl r30=1f                             // load nested fault continuation point
         ;;
 1:      ld8 r18=[r17]                           // read *pte
@@ -305,7 +313,7 @@ dtlb_fault:
         tbit.z p6,p0=r18,_PAGE_P_BIT            // page present bit cleared?
 (p6)    br.cond.spnt page_fault
         ;;
-        itc.d r18
+        ITC_D(p0, r18, r19)
         ;;
 #ifdef CONFIG_SMP
         /*
@@ -322,7 +330,7 @@ dtlb_fault:
 (p7)    ptc.l r16,r20
 #endif
         mov pr=r31,-1
-        rfi
+        RFI
 END(dtlb_miss)
 
         .org ia64_ivt+0x0c00
@@ -330,9 +338,9 @@ END(dtlb_miss)
 // 0x0c00 Entry 3 (size 64 bundles) Alt ITLB (19)
 ENTRY(alt_itlb_miss)
         DBG_FAULT(3)
-        mov r16=cr.ifa          // get address that caused the TLB miss
+        MOV_FROM_IFA(r16)       // get address that caused the TLB miss
         movl r17=PAGE_KERNEL
-        mov r21=cr.ipsr
+        MOV_FROM_IPSR(p0, r21)
         movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
         mov r31=pr
         ;;
@@ -341,9 +349,9 @@ ENTRY(alt_itlb_miss)
         ;;
         cmp.gt p8,p0=6,r22                      // user mode
         ;;
-(p8)    thash r17=r16
+        THASH(p8, r17, r16, r23)
         ;;
-(p8)    mov cr.iha=r17
+        MOV_TO_IHA(p8, r17, r23)
 (p8)    mov r29=b0                              // save b0
 (p8)    br.cond.dptk .itlb_fault
 #endif
@@ -358,9 +366,9 @@ ENTRY(alt_itlb_miss)
         or r19=r19,r18          // set bit 4 (uncached) if the access was to region 6
 (p8)    br.cond.spnt page_fault
         ;;
-        itc.i r19               // insert the TLB entry
+        ITC_I(p0, r19, r18)     // insert the TLB entry
         mov pr=r31,-1
-        rfi
+        RFI
 END(alt_itlb_miss)
 
         .org ia64_ivt+0x1000
@@ -368,11 +376,11 @@ END(alt_itlb_miss)
 // 0x1000 Entry 4 (size 64 bundles) Alt DTLB (7,46)
 ENTRY(alt_dtlb_miss)
         DBG_FAULT(4)
-        mov r16=cr.ifa          // get address that caused the TLB miss
+        MOV_FROM_IFA(r16)       // get address that caused the TLB miss
         movl r17=PAGE_KERNEL
-        mov r20=cr.isr
+        MOV_FROM_ISR(r20)
         movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
-        mov r21=cr.ipsr
+        MOV_FROM_IPSR(p0, r21)
         mov r31=pr
         mov r24=PERCPU_ADDR
         ;;
@@ -381,9 +389,9 @@ ENTRY(alt_dtlb_miss)
         ;;
         cmp.gt p8,p0=6,r22                      // access to region 0-5
         ;;
-(p8)    thash r17=r16
+        THASH(p8, r17, r16, r25)
         ;;
-(p8)    mov cr.iha=r17
+        MOV_TO_IHA(p8, r17, r25)
 (p8)    mov r29=b0                              // save b0
 (p8)    br.cond.dptk dtlb_fault
 #endif
@@ -402,7 +410,7 @@ ENTRY(alt_dtlb_miss)
         tbit.nz p9,p0=r20,IA64_ISR_NA_BIT       // is non-access bit on?
         ;;
 (p10)   sub r19=r19,r26
-(p10)   mov cr.itir=r25
+        MOV_TO_ITIR(p10, r25, r24)
         cmp.ne p8,p0=r0,r23
 (p9)    cmp.eq.or.andcm p6,p7=IA64_ISR_CODE_LFETCH,r22  // check isr.code field
 (p12)   dep r17=-1,r17,4,1                      // set ma=UC for region 6 addr
@@ -411,11 +419,11 @@ ENTRY(alt_dtlb_miss)
         dep r21=-1,r21,IA64_PSR_ED_BIT,1
         ;;
         or r19=r19,r17          // insert PTE control bits into r19
-(p6)    mov cr.ipsr=r21
+        MOV_TO_IPSR(p6, r21, r24)
         ;;
-(p7)    itc.d r19               // insert the TLB entry
+        ITC_D(p7, r19, r18)     // insert the TLB entry
         mov pr=r31,-1
-        rfi
+        RFI
 END(alt_dtlb_miss)
 
         .org ia64_ivt+0x1400
@@ -444,10 +452,10 @@ ENTRY(nested_dtlb_miss)
          *
          * Clobbered:   b0, r18, r19, r21, r22, psr.dt (cleared)
          */
-        rsm psr.dt                              // switch to using physical data addressing
+        RSM_PSR_DT                              // switch to using physical data addressing
         mov r19=IA64_KR(PT_BASE)                // get the page table base address
         shl r21=r16,3                           // shift bit 60 into sign bit
-        mov r18=cr.itir
+        MOV_FROM_ITIR(r18)
         ;;
         shr.u r17=r16,61                        // get the region number into r17
         extr.u r18=r18,2,6                      // get the faulting page size
@@ -507,33 +515,6 @@ ENTRY(ikey_miss)
         FAULT(6)
 END(ikey_miss)
 
-        //-----------------------------------------------------------------------------------
-        // call do_page_fault (predicates are in r31, psr.dt may be off, r16 is faulting address)
-ENTRY(page_fault)
-        ssm psr.dt
-        ;;
-        srlz.i
-        ;;
-        SAVE_MIN_WITH_COVER
-        alloc r15=ar.pfs,0,0,3,0
-        mov out0=cr.ifa
-        mov out1=cr.isr
-        adds r3=8,r2                            // set up second base pointer
-        ;;
-        ssm psr.ic | PSR_DEFAULT_BITS
-        ;;
-        srlz.i                                  // guarantee that interruption collectin is on
-        ;;
-(p15)   ssm psr.i                               // restore psr.i
-        movl r14=ia64_leave_kernel
-        ;;
-        SAVE_REST
-        mov rp=r14
-        ;;
-        adds out2=16,r12                        // out2 = pointer to pt_regs
-        br.call.sptk.many b6=ia64_do_page_fault // ignore return address
-END(page_fault)
-
         .org ia64_ivt+0x1c00
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x1c00 Entry 7 (size 64 bundles) Data Key Miss (12,51)
@@ -556,10 +537,10 @@ ENTRY(dirty_bit)
          * page table TLB entry isn't present, we take a nested TLB miss hit where we look
          * up the physical address of the L3 PTE and then continue at label 1 below.
          */
-        mov r16=cr.ifa                          // get the address that caused the fault
+        MOV_FROM_IFA(r16)                       // get the address that caused the fault
         movl r30=1f                             // load continuation point in case of nested fault
         ;;
-        thash r17=r16                           // compute virtual address of L3 PTE
+        THASH(p0, r17, r16, r18)                // compute virtual address of L3 PTE
         mov r29=b0                              // save b0 in case of nested fault
         mov r31=pr                              // save pr
 #ifdef CONFIG_SMP
@@ -576,7 +557,7 @@ ENTRY(dirty_bit)
         ;;
 (p6)    cmp.eq p6,p7=r26,r18                    // Only compare if page is present
         ;;
-(p6)    itc.d r25                               // install updated PTE
+        ITC_D(p6, r25, r18)                     // install updated PTE
         ;;
         /*
          * Tell the assemblers dependency-violation checker that the above "itc" instructions
@@ -602,7 +583,7 @@ ENTRY(dirty_bit)
         itc.d r18                               // install updated PTE
 #endif
         mov pr=r31,-1                           // restore pr
-        rfi
+        RFI
 END(dirty_bit)
 
         .org ia64_ivt+0x2400
@@ -611,22 +592,22 @@ END(dirty_bit)
 ENTRY(iaccess_bit)
         DBG_FAULT(9)
         // Like Entry 8, except for instruction access
-        mov r16=cr.ifa                          // get the address that caused the fault
+        MOV_FROM_IFA(r16)                       // get the address that caused the fault
         movl r30=1f                             // load continuation point in case of nested fault
         mov r31=pr                              // save predicates
 #ifdef CONFIG_ITANIUM
         /*
          * Erratum 10 (IFA may contain incorrect address) has "NoFix" status.
          */
-        mov r17=cr.ipsr
+        MOV_FROM_IPSR(p0, r17)
         ;;
-        mov r18=cr.iip
+        MOV_FROM_IIP(r18)
         tbit.z p6,p0=r17,IA64_PSR_IS_BIT        // IA64 instruction set?
         ;;
 (p6)    mov r16=r18                             // if so, use cr.iip instead of cr.ifa
 #endif /* CONFIG_ITANIUM */
         ;;
-        thash r17=r16                           // compute virtual address of L3 PTE
+        THASH(p0, r17, r16, r18)                // compute virtual address of L3 PTE
         mov r29=b0                              // save b0 in case of nested fault)
 #ifdef CONFIG_SMP
         mov r28=ar.ccv                          // save ar.ccv
@@ -642,7 +623,7 @@ ENTRY(iaccess_bit)
         ;;
 (p6)    cmp.eq p6,p7=r26,r18                    // Only if page present
         ;;
-(p6)    itc.i r25                               // install updated PTE
+        ITC_I(p6, r25, r26)                     // install updated PTE
         ;;
         /*
          * Tell the assemblers dependency-violation checker that the above "itc" instructions
@@ -668,7 +649,7 @@ ENTRY(iaccess_bit)
         itc.i r18                               // install updated PTE
 #endif /* !CONFIG_SMP */
         mov pr=r31,-1
-        rfi
+        RFI
 END(iaccess_bit)
 
         .org ia64_ivt+0x2800
@@ -677,10 +658,10 @@ END(iaccess_bit)
 ENTRY(daccess_bit)
         DBG_FAULT(10)
         // Like Entry 8, except for data access
-        mov r16=cr.ifa                          // get the address that caused the fault
+        MOV_FROM_IFA(r16)                       // get the address that caused the fault
         movl r30=1f                             // load continuation point in case of nested fault
         ;;
-        thash r17=r16                           // compute virtual address of L3 PTE
+        THASH(p0, r17, r16, r18)                // compute virtual address of L3 PTE
         mov r31=pr
         mov r29=b0                              // save b0 in case of nested fault)
 #ifdef CONFIG_SMP
@@ -697,7 +678,7 @@ ENTRY(daccess_bit)
         ;;
 (p6)    cmp.eq p6,p7=r26,r18                    // Only if page is present
         ;;
-(p6)    itc.d r25                               // install updated PTE
+        ITC_D(p6, r25, r26)                     // install updated PTE
         /*
          * Tell the assemblers dependency-violation checker that the above "itc" instructions
          * cannot possibly affect the following loads:
@@ -721,7 +702,7 @@ ENTRY(daccess_bit)
 #endif
         mov b0=r29                              // restore b0
         mov pr=r31,-1
-        rfi
+        RFI
 END(daccess_bit)
 
         .org ia64_ivt+0x2c00
@@ -745,10 +726,10 @@ ENTRY(break_fault)
          */
         DBG_FAULT(11)
         mov.m r16=IA64_KR(CURRENT)              // M2 r16 <- current task (12 cyc)
-        mov r29=cr.ipsr                         // M2 (12 cyc)
+        MOV_FROM_IPSR(p0, r29)                  // M2 (12 cyc)
         mov r31=pr                              // I0 (2 cyc)
 
-        mov r17=cr.iim                          // M2 (2 cyc)
+        MOV_FROM_IIM(r17)                       // M2 (2 cyc)
         mov.m r27=ar.rsc                        // M2 (12 cyc)
         mov r18=__IA64_BREAK_SYSCALL            // A
 
@@ -767,7 +748,7 @@ ENTRY(break_fault)
         nop.m 0
         movl r30=sys_call_table                 // X
 
-        mov r28=cr.iip                          // M2 (2 cyc)
+        MOV_FROM_IIP(r28)                       // M2 (2 cyc)
         cmp.eq p0,p7=r18,r17                    // I0 is this a system call?
 (p7)    br.cond.spnt non_syscall                // B  no ->
         //
@@ -864,18 +845,17 @@ ENTRY(break_fault)
 #endif
         mov ar.rsc=0x3                          // M2   set eager mode, pl 0, LE, loadrs=0
         nop 0
-        bsw.1                                   // B (6 cyc) regs are saved, switch to bank 1
+        BSW_1(r2, r14)                          // B (6 cyc) regs are saved, switch to bank 1
         ;;
 
-        ssm psr.ic | PSR_DEFAULT_BITS           // M2   now it's safe to re-enable intr.-collection
+        SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r16) // M2   now it's safe to re-enable intr.-collection
+                                                // M0   ensure interruption collection is on
         movl r3=ia64_ret_from_syscall           // X
         ;;
-
-        srlz.i                                  // M0   ensure interruption collection is on
         mov rp=r3                               // I0   set the real return addr
 (p10)   br.cond.spnt.many ia64_ret_from_syscall // B    return if bad call-frame or r15 is a NaT
 
-(p15)   ssm psr.i                               // M2   restore psr.i
+        SSM_PSR_I(p15, p15, r16)                // M2   restore psr.i
 (p14)   br.call.sptk.many b6=b6                 // B    invoke syscall-handker (ignore return addr)
         br.cond.spnt.many ia64_trace_syscall    // B    do syscall-tracing thingamagic
         // NOT REACHED
@@ -895,27 +875,8 @@ END(break_fault)
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x3000 Entry 12 (size 64 bundles) External Interrupt (4)
 ENTRY(interrupt)
-        DBG_FAULT(12)
-        mov r31=pr              // prepare to save predicates
-        ;;
-        SAVE_MIN_WITH_COVER     // uses r31; defines r2 and r3
-        ssm psr.ic | PSR_DEFAULT_BITS
-        ;;
-        adds r3=8,r2            // set up second base pointer for SAVE_REST
-        srlz.i                  // ensure everybody knows psr.ic is back on
-        ;;
-        SAVE_REST
-        ;;
-        MCA_RECOVER_RANGE(interrupt)
-        alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group
-        mov out0=cr.ivr         // pass cr.ivr as first arg
-        add out1=16,sp          // pass pointer to pt_regs as second arg
-        ;;
-        srlz.d                  // make sure we see the effect of cr.ivr
-        movl r14=ia64_leave_kernel
-        ;;
-        mov rp=r14
-        br.call.sptk.many b6=ia64_handle_irq
+        /* interrupt handler has become too big to fit this area. */
+        br.sptk.many __interrupt
 END(interrupt)
 
         .org ia64_ivt+0x3400
@@ -978,6 +939,7 @@ END(interrupt)
          *      - ar.fpsr: set to kernel settings
          *      -  b6: preserved (same as on entry)
          */
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 GLOBAL_ENTRY(ia64_syscall_setup)
 #if PT(B6) != 0
 # error This code assumes that b6 is the first field in pt_regs.
@@ -1069,6 +1031,7 @@ GLOBAL_ENTRY(ia64_syscall_setup)
 (p10)   mov r8=-EINVAL
         br.ret.sptk.many b7
 END(ia64_syscall_setup)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
 
         .org ia64_ivt+0x3c00
 /////////////////////////////////////////////////////////////////////////////////////////
@@ -1082,7 +1045,7 @@ END(ia64_syscall_setup)
         DBG_FAULT(16)
         FAULT(16)
 
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(__IA64_ASM_PARAVIRTUALIZED_NATIVE)
         /*
          * There is no particular reason for this code to be here, other than
          * that there happens to be space here that would go unused otherwise.
@@ -1092,7 +1055,7 @@ END(ia64_syscall_setup)
          * account_sys_enter is called from SAVE_MIN* macros if accounting is
          * enabled and if the macro is entered from user mode.
          */
-ENTRY(account_sys_enter)
+GLOBAL_ENTRY(account_sys_enter)
         // mov.m r20=ar.itc is called in advance, and r13 is current
         add r16=TI_AC_STAMP+IA64_TASK_SIZE,r13
         add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r13
@@ -1123,110 +1086,18 @@ END(account_sys_enter)
         DBG_FAULT(17)
         FAULT(17)
 
-ENTRY(non_syscall)
-        mov ar.rsc=r27                  // restore ar.rsc before SAVE_MIN_WITH_COVER
-        ;;
-        SAVE_MIN_WITH_COVER
-
-        // There is no particular reason for this code to be here, other than that
-        // there happens to be space here that would go unused otherwise.  If this
-        // fault ever gets "unreserved", simply moved the following code to a more
-        // suitable spot...
-
-        alloc r14=ar.pfs,0,0,2,0
-        mov out0=cr.iim
-        add out1=16,sp
-        adds r3=8,r2                    // set up second base pointer for SAVE_REST
-
-        ssm psr.ic | PSR_DEFAULT_BITS
-        ;;
-        srlz.i                          // guarantee that interruption collection is on
-        ;;
-(p15)   ssm psr.i                       // restore psr.i
-        movl r15=ia64_leave_kernel
-        ;;
-        SAVE_REST
-        mov rp=r15
-        ;;
-        br.call.sptk.many b6=ia64_bad_break     // avoid WAW on CFM and ignore return addr
-END(non_syscall)
-
         .org ia64_ivt+0x4800
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4800 Entry 18 (size 64 bundles) Reserved
         DBG_FAULT(18)
         FAULT(18)
 
-        /*
-         * There is no particular reason for this code to be here, other than that
-         * there happens to be space here that would go unused otherwise.  If this
-         * fault ever gets "unreserved", simply moved the following code to a more
-         * suitable spot...
-         */
-
-ENTRY(dispatch_unaligned_handler)
-        SAVE_MIN_WITH_COVER
-        ;;
-        alloc r14=ar.pfs,0,0,2,0                // now it's safe (must be first in insn group!)
-        mov out0=cr.ifa
-        adds out1=16,sp
-
-        ssm psr.ic | PSR_DEFAULT_BITS
-        ;;
-        srlz.i                                  // guarantee that interruption collection is on
-        ;;
-(p15)   ssm psr.i                               // restore psr.i
-        adds r3=8,r2                            // set up second base pointer
-        ;;
-        SAVE_REST
-        movl r14=ia64_leave_kernel
-        ;;
-        mov rp=r14
-        br.sptk.many ia64_prepare_handle_unaligned
-END(dispatch_unaligned_handler)
-
         .org ia64_ivt+0x4c00
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4c00 Entry 19 (size 64 bundles) Reserved
         DBG_FAULT(19)
         FAULT(19)
 
-        /*
-         * There is no particular reason for this code to be here, other than that
-         * there happens to be space here that would go unused otherwise.  If this
-         * fault ever gets "unreserved", simply moved the following code to a more
-         * suitable spot...
-         */
-
-ENTRY(dispatch_to_fault_handler)
-        /*
-         * Input:
-         *      psr.ic: off
-         *      r19:    fault vector number (e.g., 24 for General Exception)
-         *      r31:    contains saved predicates (pr)
-         */
-        SAVE_MIN_WITH_COVER_R19
-        alloc r14=ar.pfs,0,0,5,0
-        mov out0=r15
-        mov out1=cr.isr
-        mov out2=cr.ifa
-        mov out3=cr.iim
-        mov out4=cr.itir
-        ;;
-        ssm psr.ic | PSR_DEFAULT_BITS
-        ;;
-        srlz.i                                  // guarantee that interruption collection is on
-        ;;
-(p15)   ssm psr.i                               // restore psr.i
-        adds r3=8,r2                            // set up second base pointer for SAVE_REST
-        ;;
-        SAVE_REST
-        movl r14=ia64_leave_kernel
-        ;;
-        mov rp=r14
-        br.call.sptk.many b6=ia64_fault
-END(dispatch_to_fault_handler)
-
 //
 // --- End of long entries, Beginning of short entries
 //
@@ -1236,8 +1107,8 @@ END(dispatch_to_fault_handler)
 // 0x5000 Entry 20 (size 16 bundles) Page Not Present (10,22,49)
 ENTRY(page_not_present)
         DBG_FAULT(20)
-        mov r16=cr.ifa
-        rsm psr.dt
+        MOV_FROM_IFA(r16)
+        RSM_PSR_DT
         /*
          * The Linux page fault handler doesn't expect non-present pages to be in
          * the TLB.  Flush the existing entry now, so we meet that expectation.
@@ -1256,8 +1127,8 @@ END(page_not_present)
 // 0x5100 Entry 21 (size 16 bundles) Key Permission (13,25,52)
 ENTRY(key_permission)
         DBG_FAULT(21)
-        mov r16=cr.ifa
-        rsm psr.dt
+        MOV_FROM_IFA(r16)
+        RSM_PSR_DT
         mov r31=pr
         ;;
         srlz.d
@@ -1269,8 +1140,8 @@ END(key_permission)
 // 0x5200 Entry 22 (size 16 bundles) Instruction Access Rights (26)
 ENTRY(iaccess_rights)
         DBG_FAULT(22)
-        mov r16=cr.ifa
-        rsm psr.dt
+        MOV_FROM_IFA(r16)
+        RSM_PSR_DT
         mov r31=pr
         ;;
         srlz.d
@@ -1282,8 +1153,8 @@ END(iaccess_rights)
 // 0x5300 Entry 23 (size 16 bundles) Data Access Rights (14,53)
 ENTRY(daccess_rights)
         DBG_FAULT(23)
-        mov r16=cr.ifa
-        rsm psr.dt
+        MOV_FROM_IFA(r16)
+        RSM_PSR_DT
         mov r31=pr
         ;;
         srlz.d
@@ -1295,7 +1166,7 @@ END(daccess_rights)
 // 0x5400 Entry 24 (size 16 bundles) General Exception (5,32,34,36,38,39)
 ENTRY(general_exception)
         DBG_FAULT(24)
-        mov r16=cr.isr
+        MOV_FROM_ISR(r16)
         mov r31=pr
         ;;
         cmp4.eq p6,p0=0,r16
@@ -1324,8 +1195,8 @@ END(disabled_fp_reg)
 ENTRY(nat_consumption)
         DBG_FAULT(26)
 
-        mov r16=cr.ipsr
-        mov r17=cr.isr
+        MOV_FROM_IPSR(p0, r16)
+        MOV_FROM_ISR(r17)
         mov r31=pr                              // save PR
         ;;
         and r18=0xf,r17                         // r18 = cr.ipsr.code{3:0}
@@ -1335,10 +1206,10 @@ ENTRY(nat_consumption)
         dep r16=-1,r16,IA64_PSR_ED_BIT,1
 (p6)    br.cond.spnt 1f         // branch if (cr.ispr.na == 0 || cr.ipsr.code{3:0} != LFETCH)
         ;;
-        mov cr.ipsr=r16         // set cr.ipsr.na
+        MOV_TO_IPSR(p0, r16, r18)
         mov pr=r31,-1
         ;;
-        rfi
+        RFI
 
 1:      mov pr=r31,-1
         ;;
@@ -1360,26 +1231,26 @@ ENTRY(speculation_vector)
          *
          * cr.imm contains zero_ext(imm21)
          */
-        mov r18=cr.iim
+        MOV_FROM_IIM(r18)
         ;;
-        mov r17=cr.iip
+        MOV_FROM_IIP(r17)
         shl r18=r18,43                  // put sign bit in position (43=64-21)
         ;;
 
-        mov r16=cr.ipsr
+        MOV_FROM_IPSR(p0, r16)
         shr r18=r18,39                  // sign extend (39=43-4)
         ;;
 
         add r17=r17,r18                 // now add the offset
         ;;
-        mov cr.iip=r17
+        MOV_FROM_IIP(r17)
         dep r16=0,r16,41,2              // clear EI
         ;;
 
-        mov cr.ipsr=r16
+        MOV_FROM_IPSR(p0, r16)
         ;;
 
-        rfi                             // and go back
+        RFI
 END(speculation_vector)
 
         .org ia64_ivt+0x5800
@@ -1517,11 +1388,11 @@ ENTRY(ia32_intercept)
         DBG_FAULT(46)
 #ifdef  CONFIG_IA32_SUPPORT
         mov r31=pr
-        mov r16=cr.isr
+        MOV_FROM_ISR(r16)
         ;;
         extr.u r17=r16,16,8     // get ISR.code
         mov r18=ar.eflag
-        mov r19=cr.iim          // old eflag value
+        MOV_FROM_IIM(r19)       // old eflag value
         ;;
         cmp.ne p6,p0=2,r17
 (p6)    br.cond.spnt 1f         // not a system flag fault
@@ -1533,7 +1404,7 @@ ENTRY(ia32_intercept)
 (p6)    br.cond.spnt 1f         // eflags.ac bit didn't change
         ;;
         mov pr=r31,-1           // restore predicate registers
-        rfi
+        RFI
 
 1:
 #endif  // CONFIG_IA32_SUPPORT
@@ -1673,6 +1544,137 @@ END(ia32_interrupt)
         DBG_FAULT(67)
         FAULT(67)
 
+        //-----------------------------------------------------------------------------------
+        // call do_page_fault (predicates are in r31, psr.dt may be off, r16 is faulting address)
+ENTRY(page_fault)
+        SSM_PSR_DT_AND_SRLZ_I
+        ;;
+        SAVE_MIN_WITH_COVER
+        alloc r15=ar.pfs,0,0,3,0
+        MOV_FROM_IFA(out0)
+        MOV_FROM_ISR(out1)
+        SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r14, r3)
+        adds r3=8,r2                            // set up second base pointer
+        SSM_PSR_I(p15, p15, r14)                // restore psr.i
+        movl r14=ia64_leave_kernel
+        ;;
+        SAVE_REST
+        mov rp=r14
+        ;;
+        adds out2=16,r12                        // out2 = pointer to pt_regs
+        br.call.sptk.many b6=ia64_do_page_fault // ignore return address
+END(page_fault)
+
+ENTRY(non_syscall)
+        mov ar.rsc=r27                  // restore ar.rsc before SAVE_MIN_WITH_COVER
+        ;;
+        SAVE_MIN_WITH_COVER
+
+        // There is no particular reason for this code to be here, other than that
+        // there happens to be space here that would go unused otherwise.  If this
+        // fault ever gets "unreserved", simply moved the following code to a more
+        // suitable spot...
+
+        alloc r14=ar.pfs,0,0,2,0
+        MOV_FROM_IIM(out0)
+        add out1=16,sp
+        adds r3=8,r2                    // set up second base pointer for SAVE_REST
+
+        SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r15, r24)
+                                        // guarantee that interruption collection is on
+        SSM_PSR_I(p15, p15, r15)        // restore psr.i
+        movl r15=ia64_leave_kernel
+        ;;
+        SAVE_REST
+        mov rp=r15
+        ;;
+        br.call.sptk.many b6=ia64_bad_break     // avoid WAW on CFM and ignore return addr
+END(non_syscall)
+
+ENTRY(__interrupt)
+        DBG_FAULT(12)
+        mov r31=pr              // prepare to save predicates
+        ;;
+        SAVE_MIN_WITH_COVER     // uses r31; defines r2 and r3
+        SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r14)
+                                // ensure everybody knows psr.ic is back on
+        adds r3=8,r2            // set up second base pointer for SAVE_REST
+        ;;
+        SAVE_REST
+        ;;
+        MCA_RECOVER_RANGE(interrupt)
+        alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group
+        MOV_FROM_IVR(out0, r8)  // pass cr.ivr as first arg
+        add out1=16,sp          // pass pointer to pt_regs as second arg
+        ;;
+        srlz.d                  // make sure we see the effect of cr.ivr
+        movl r14=ia64_leave_kernel
+        ;;
+        mov rp=r14
+        br.call.sptk.many b6=ia64_handle_irq
+END(__interrupt)
+
+        /*
+         * There is no particular reason for this code to be here, other than that
+         * there happens to be space here that would go unused otherwise.  If this
+         * fault ever gets "unreserved", simply moved the following code to a more
+         * suitable spot...
+         */
+
+ENTRY(dispatch_unaligned_handler)
+        SAVE_MIN_WITH_COVER
+        ;;
+        alloc r14=ar.pfs,0,0,2,0                // now it's safe (must be first in insn group!)
+        MOV_FROM_IFA(out0)
+        adds out1=16,sp
+
+        SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+                                                // guarantee that interruption collection is on
+        SSM_PSR_I(p15, p15, r3)                 // restore psr.i
+        adds r3=8,r2                            // set up second base pointer
+        ;;
+        SAVE_REST
+        movl r14=ia64_leave_kernel
+        ;;
+        mov rp=r14
+        br.sptk.many ia64_prepare_handle_unaligned
+END(dispatch_unaligned_handler)
+
+        /*
+         * There is no particular reason for this code to be here, other than that
+         * there happens to be space here that would go unused otherwise.  If this
+         * fault ever gets "unreserved", simply moved the following code to a more
+         * suitable spot...
+         */
+
+ENTRY(dispatch_to_fault_handler)
+        /*
+         * Input:
+         *      psr.ic: off
+         *      r19:    fault vector number (e.g., 24 for General Exception)
+         *      r31:    contains saved predicates (pr)
+         */
+        SAVE_MIN_WITH_COVER_R19
+        alloc r14=ar.pfs,0,0,5,0
+        MOV_FROM_ISR(out1)
+        MOV_FROM_IFA(out2)
+        MOV_FROM_IIM(out3)
+        MOV_FROM_ITIR(out4)
+        ;;
+        SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, out0)
+                                                // guarantee that interruption collection is on
+        mov out0=r15
+        ;;
+        SSM_PSR_I(p15, p15, r3)                 // restore psr.i
+        adds r3=8,r2                            // set up second base pointer for SAVE_REST
+        ;;
+        SAVE_REST
+        movl r14=ia64_leave_kernel
+        ;;
+        mov rp=r14
+        br.call.sptk.many b6=ia64_fault
+END(dispatch_to_fault_handler)
+
         /*
          * Squatting in this space ...
          *
@@ -1686,11 +1688,10 @@ ENTRY(dispatch_illegal_op_fault)
         .prologue
         .body
         SAVE_MIN_WITH_COVER
-        ssm psr.ic | PSR_DEFAULT_BITS
-        ;;
-        srlz.i          // guarantee that interruption collection is on
+        SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+                                // guarantee that interruption collection is on
         ;;
-(p15)   ssm psr.i       // restore psr.i
+        SSM_PSR_I(p15, p15, r3) // restore psr.i
         adds r3=8,r2    // set up second base pointer for SAVE_REST
         ;;
         alloc r14=ar.pfs,0,0,1,0        // must be first in insn group
@@ -1729,12 +1730,11 @@ END(dispatch_illegal_op_fault)
 ENTRY(dispatch_to_ia32_handler)
         SAVE_MIN
         ;;
-        mov r14=cr.isr
-        ssm psr.ic | PSR_DEFAULT_BITS
-        ;;
-        srlz.i                                  // guarantee that interruption collection is on
+        MOV_FROM_ISR(r14)
+        SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+                                // guarantee that interruption collection is on
         ;;
-(p15)   ssm psr.i
+        SSM_PSR_I(p15, p15, r3)
         adds r3=8,r2            // Base pointer for SAVE_REST
         ;;
         SAVE_REST
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 233434f4f88f..f07688da947c 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -429,8 +429,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
                 ((struct fnptr *)kretprobe_trampoline)->ip;
 
         INIT_HLIST_HEAD(&empty_rp);
-        spin_lock_irqsave(&kretprobe_lock, flags);
-        head = kretprobe_inst_table_head(current);
+        kretprobe_hash_lock(current, &head, &flags);
 
         /*
          * It is possible to have multiple instances associated with a given
@@ -485,7 +484,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
         kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
         reset_current_kprobe();
-        spin_unlock_irqrestore(&kretprobe_lock, flags);
+        kretprobe_hash_unlock(current, &flags);
         preempt_enable_no_resched();
 
         hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
@@ -500,7 +499,6 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
         return 1;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
                                       struct pt_regs *regs)
 {
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 74b6d670aaef..292e214a3b84 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -2,6 +2,7 @@
 #include <asm/cache.h>
 
 #include "entry.h"
+#include "paravirt_inst.h"
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 /* read ar.itc in advance, and use it before leaving bank 0 */
@@ -43,16 +44,16 @@
  * Note that psr.ic is NOT turned on by this macro.  This is so that
  * we can pass interruption state as arguments to a handler.
  */
-#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND)                                            \
+#define IA64_NATIVE_DO_SAVE_MIN(__COVER,SAVE_IFS,EXTRA,WORKAROUND)                              \
         mov r16=IA64_KR(CURRENT);       /* M */                                                 \
         mov r27=ar.rsc;                 /* M */                                                 \
         mov r20=r1;                     /* A */                                                 \
         mov r25=ar.unat;                /* M */                                                 \
-        mov r29=cr.ipsr;                /* M */                                                 \
+        MOV_FROM_IPSR(p0,r29);          /* M */                                                 \
         mov r26=ar.pfs;                 /* I */                                                 \
-        mov r28=cr.iip;                 /* M */                                                 \
+        MOV_FROM_IIP(r28);                      /* M */                                         \
         mov r21=ar.fpsr;                /* M */                                                 \
-        COVER;                          /* B;; (or nothing) */                                  \
+        __COVER;                                /* B;; (or nothing) */                          \
         ;;                                                                                      \
         adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16;                                         \
         ;;                                                                                      \
@@ -244,6 +245,6 @@
 1:                                              \
         .pred.rel "mutex", pKStk, pUStk
 
-#define SAVE_MIN_WITH_COVER     DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
-#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER     DO_SAVE_MIN(COVER, mov r30=cr.ifs, , RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(COVER, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
 #define SAVE_MIN                        DO_SAVE_MIN(     , mov r30=r0, , )
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index e83e2ea3b3e0..29aad349e0c4 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -321,7 +321,8 @@ module_alloc (unsigned long size)
 void
 module_free (struct module *mod, void *module_region)
 {
-        if (mod->arch.init_unw_table && module_region == mod->module_init) {
+        if (mod && mod->arch.init_unw_table &&
+            module_region == mod->module_init) {
                 unw_remove_unwind_table(mod->arch.init_unw_table);
                 mod->arch.init_unw_table = NULL;
         }
diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c
new file mode 100644
index 000000000000..1ae049181e83
--- /dev/null
+++ b/arch/ia64/kernel/nr-irqs.c
@@ -0,0 +1,24 @@
+/*
+ * calculate
+ * NR_IRQS = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, FOO_NR_IRQS...)
+ * depending on config.
+ * This must be calculated before processing asm-offset.c.
+ */
+
+#define ASM_OFFSETS_C 1
+
+#include <linux/kbuild.h>
+#include <linux/threads.h>
+#include <asm-ia64/native/irq.h>
+
+void foo(void)
+{
+        union paravirt_nr_irqs_max {
+                char ia64_native_nr_irqs[IA64_NATIVE_NR_IRQS];
+#ifdef CONFIG_XEN
+                char xen_nr_irqs[XEN_NR_IRQS];
+#endif
+        };
+
+        DEFINE(NR_IRQS, sizeof (union paravirt_nr_irqs_max));
+}
diff --git a/arch/ia64/kernel/paravirt.c b/arch/ia64/kernel/paravirt.c
new file mode 100644
index 000000000000..afaf5b9a2cf0
--- /dev/null
+++ b/arch/ia64/kernel/paravirt.c
@@ -0,0 +1,369 @@
+/******************************************************************************
+ * arch/ia64/kernel/paravirt.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *     Yaozu (Eddie) Dong <eddie.dong@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <asm/iosapic.h>
+#include <asm/paravirt.h>
+
+/***************************************************************************
+ * general info
+ */
+struct pv_info pv_info = {
+        .kernel_rpl = 0,
+        .paravirt_enabled = 0,
+        .name = "bare hardware"
+};
+
+/***************************************************************************
+ * pv_init_ops
+ * initialization hooks.
+ */
+
+struct pv_init_ops pv_init_ops;
+
+/***************************************************************************
+ * pv_cpu_ops
+ * intrinsics hooks.
+ */
+
+/* ia64_native_xxx are macros so that we have to make them real functions */
+
+#define DEFINE_VOID_FUNC1(name)                                 \
+        static void                                             \
+        ia64_native_ ## name ## _func(unsigned long arg)        \
+        {                                                       \
+                ia64_native_ ## name(arg);                      \
+        }                                                       \
+
+#define DEFINE_VOID_FUNC2(name)                                 \
+        static void                                             \
+        ia64_native_ ## name ## _func(unsigned long arg0,       \
+                                      unsigned long arg1)       \
+        {                                                       \
+                ia64_native_ ## name(arg0, arg1);               \
+        }                                                       \
+
+#define DEFINE_FUNC0(name)                      \
+        static unsigned long                    \
+        ia64_native_ ## name ## _func(void)     \
+        {                                       \
+                return ia64_native_ ## name();  \
+        }
+
+#define DEFINE_FUNC1(name, type)                        \
+        static unsigned long                            \
+        ia64_native_ ## name ## _func(type arg)         \
+        {                                               \
+                return ia64_native_ ## name(arg);       \
+        }                                               \
+
+DEFINE_VOID_FUNC1(fc);
+DEFINE_VOID_FUNC1(intrin_local_irq_restore);
+
+DEFINE_VOID_FUNC2(ptcga);
+DEFINE_VOID_FUNC2(set_rr);
+
+DEFINE_FUNC0(get_psr_i);
+
+DEFINE_FUNC1(thash, unsigned long);
+DEFINE_FUNC1(get_cpuid, int);
+DEFINE_FUNC1(get_pmd, int);
+DEFINE_FUNC1(get_rr, unsigned long);
+
+static void
+ia64_native_ssm_i_func(void)
+{
+        ia64_native_ssm(IA64_PSR_I);
+}
+
+static void
+ia64_native_rsm_i_func(void)
+{
+        ia64_native_rsm(IA64_PSR_I);
+}
+
+static void
+ia64_native_set_rr0_to_rr4_func(unsigned long val0, unsigned long val1,
+                                unsigned long val2, unsigned long val3,
+                                unsigned long val4)
+{
+        ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4);
+}
+
+#define CASE_GET_REG(id)                                \
+        case _IA64_REG_ ## id:                          \
+        res = ia64_native_getreg(_IA64_REG_ ## id);     \
+        break;
+#define CASE_GET_AR(id) CASE_GET_REG(AR_ ## id)
+#define CASE_GET_CR(id) CASE_GET_REG(CR_ ## id)
+
+unsigned long
+ia64_native_getreg_func(int regnum)
+{
+        unsigned long res = -1;
+        switch (regnum) {
+        CASE_GET_REG(GP);
+        CASE_GET_REG(IP);
+        CASE_GET_REG(PSR);
+        CASE_GET_REG(TP);
+        CASE_GET_REG(SP);
+
+        CASE_GET_AR(KR0);
+        CASE_GET_AR(KR1);
+        CASE_GET_AR(KR2);
+        CASE_GET_AR(KR3);
+        CASE_GET_AR(KR4);
+        CASE_GET_AR(KR5);
+        CASE_GET_AR(KR6);
+        CASE_GET_AR(KR7);
+        CASE_GET_AR(RSC);
+        CASE_GET_AR(BSP);
+        CASE_GET_AR(BSPSTORE);
+        CASE_GET_AR(RNAT);
+        CASE_GET_AR(FCR);
+        CASE_GET_AR(EFLAG);
+        CASE_GET_AR(CSD);
+        CASE_GET_AR(SSD);
+        CASE_GET_AR(CFLAG);
+        CASE_GET_AR(FSR);
+        CASE_GET_AR(FIR);
+        CASE_GET_AR(FDR);
+        CASE_GET_AR(CCV);
+        CASE_GET_AR(UNAT);
+        CASE_GET_AR(FPSR);
+        CASE_GET_AR(ITC);
+        CASE_GET_AR(PFS);
+        CASE_GET_AR(LC);
+        CASE_GET_AR(EC);
+
+        CASE_GET_CR(DCR);
+        CASE_GET_CR(ITM);
+        CASE_GET_CR(IVA);
+        CASE_GET_CR(PTA);
+        CASE_GET_CR(IPSR);
+        CASE_GET_CR(ISR);
+        CASE_GET_CR(IIP);
+        CASE_GET_CR(IFA);
+        CASE_GET_CR(ITIR);
+        CASE_GET_CR(IIPA);
+        CASE_GET_CR(IFS);
+        CASE_GET_CR(IIM);
+        CASE_GET_CR(IHA);
+        CASE_GET_CR(LID);
+        CASE_GET_CR(IVR);
+        CASE_GET_CR(TPR);
+        CASE_GET_CR(EOI);
+        CASE_GET_CR(IRR0);
+        CASE_GET_CR(IRR1);
+        CASE_GET_CR(IRR2);
+        CASE_GET_CR(IRR3);
+        CASE_GET_CR(ITV);
+        CASE_GET_CR(PMV);
+        CASE_GET_CR(CMCV);
+        CASE_GET_CR(LRR0);
+        CASE_GET_CR(LRR1);
+
+        default:
+                printk(KERN_CRIT "wrong_getreg %d\n", regnum);
+                break;
+        }
+        return res;
+}
+
+#define CASE_SET_REG(id)                                \
+        case _IA64_REG_ ## id:                          \
+        ia64_native_setreg(_IA64_REG_ ## id, val);      \
+        break;
+#define CASE_SET_AR(id) CASE_SET_REG(AR_ ## id)
+#define CASE_SET_CR(id) CASE_SET_REG(CR_ ## id)
+
+void
+ia64_native_setreg_func(int regnum, unsigned long val)
+{
+        switch (regnum) {
+        case _IA64_REG_PSR_L:
+                ia64_native_setreg(_IA64_REG_PSR_L, val);
+                ia64_dv_serialize_data();
+                break;
+        CASE_SET_REG(SP);
+        CASE_SET_REG(GP);
+
+        CASE_SET_AR(KR0);
+        CASE_SET_AR(KR1);
+        CASE_SET_AR(KR2);
+        CASE_SET_AR(KR3);
+        CASE_SET_AR(KR4);
+        CASE_SET_AR(KR5);
+        CASE_SET_AR(KR6);
+        CASE_SET_AR(KR7);
+        CASE_SET_AR(RSC);
+        CASE_SET_AR(BSP);
+        CASE_SET_AR(BSPSTORE);
+        CASE_SET_AR(RNAT);
+        CASE_SET_AR(FCR);
+        CASE_SET_AR(EFLAG);
+        CASE_SET_AR(CSD);
+        CASE_SET_AR(SSD);
+        CASE_SET_AR(CFLAG);
+        CASE_SET_AR(FSR);
+        CASE_SET_AR(FIR);
+        CASE_SET_AR(FDR);
+        CASE_SET_AR(CCV);
+        CASE_SET_AR(UNAT);
+        CASE_SET_AR(FPSR);
+        CASE_SET_AR(ITC);
+        CASE_SET_AR(PFS);
+        CASE_SET_AR(LC);
+        CASE_SET_AR(EC);
+
+        CASE_SET_CR(DCR);
+        CASE_SET_CR(ITM);
+        CASE_SET_CR(IVA);
+        CASE_SET_CR(PTA);
+        CASE_SET_CR(IPSR);
+        CASE_SET_CR(ISR);
+        CASE_SET_CR(IIP);
+        CASE_SET_CR(IFA);
+        CASE_SET_CR(ITIR);
+        CASE_SET_CR(IIPA);
+        CASE_SET_CR(IFS);
+        CASE_SET_CR(IIM);
+        CASE_SET_CR(IHA);
+        CASE_SET_CR(LID);
+        CASE_SET_CR(IVR);
+        CASE_SET_CR(TPR);
+        CASE_SET_CR(EOI);
+        CASE_SET_CR(IRR0);
+        CASE_SET_CR(IRR1);
+        CASE_SET_CR(IRR2);
+        CASE_SET_CR(IRR3);
+        CASE_SET_CR(ITV);
+        CASE_SET_CR(PMV);
+        CASE_SET_CR(CMCV);
+        CASE_SET_CR(LRR0);
+        CASE_SET_CR(LRR1);
+        default:
+                printk(KERN_CRIT "wrong setreg %d\n", regnum);
+                break;
+        }
+}
+
+struct pv_cpu_ops pv_cpu_ops = {
+        .fc             = ia64_native_fc_func,
+        .thash          = ia64_native_thash_func,
+        .get_cpuid      = ia64_native_get_cpuid_func,
+        .get_pmd        = ia64_native_get_pmd_func,
+        .ptcga          = ia64_native_ptcga_func,
+        .get_rr         = ia64_native_get_rr_func,
+        .set_rr         = ia64_native_set_rr_func,
+        .set_rr0_to_rr4 = ia64_native_set_rr0_to_rr4_func,
+        .ssm_i          = ia64_native_ssm_i_func,
+        .getreg         = ia64_native_getreg_func,
+        .setreg         = ia64_native_setreg_func,
+        .rsm_i          = ia64_native_rsm_i_func,
+        .get_psr_i      = ia64_native_get_psr_i_func,
+        .intrin_local_irq_restore
+                        = ia64_native_intrin_local_irq_restore_func,
+};
+EXPORT_SYMBOL(pv_cpu_ops);
+
+/******************************************************************************
+ * replacement of hand written assembly codes.
+ */
+
+void
+paravirt_cpu_asm_init(const struct pv_cpu_asm_switch *cpu_asm_switch)
+{
+        extern unsigned long paravirt_switch_to_targ;
+        extern unsigned long paravirt_leave_syscall_targ;
+        extern unsigned long paravirt_work_processed_syscall_targ;
+        extern unsigned long paravirt_leave_kernel_targ;
+
+        paravirt_switch_to_targ = cpu_asm_switch->switch_to;
+        paravirt_leave_syscall_targ = cpu_asm_switch->leave_syscall;
+        paravirt_work_processed_syscall_targ =
+                cpu_asm_switch->work_processed_syscall;
+        paravirt_leave_kernel_targ = cpu_asm_switch->leave_kernel;
+}
+
+/***************************************************************************
+ * pv_iosapic_ops
+ * iosapic read/write hooks.
+ */
+
+static unsigned int
+ia64_native_iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+        return __ia64_native_iosapic_read(iosapic, reg);
+}
+
+static void
+ia64_native_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+        __ia64_native_iosapic_write(iosapic, reg, val);
+}
+
+struct pv_iosapic_ops pv_iosapic_ops = {
+        .pcat_compat_init = ia64_native_iosapic_pcat_compat_init,
+        .get_irq_chip = ia64_native_iosapic_get_irq_chip,
+
+        .__read = ia64_native_iosapic_read,
+        .__write = ia64_native_iosapic_write,
+};
+
+/***************************************************************************
+ * pv_irq_ops
+ * irq operations
+ */
+
+struct pv_irq_ops pv_irq_ops = {
+        .register_ipi = ia64_native_register_ipi,
+
+        .assign_irq_vector = ia64_native_assign_irq_vector,
+        .free_irq_vector = ia64_native_free_irq_vector,
+        .register_percpu_irq = ia64_native_register_percpu_irq,
+
+        .resend_irq = ia64_native_resend_irq,
+};
+
+/***************************************************************************
+ * pv_time_ops
+ * time operations
+ */
+
+static int
+ia64_native_do_steal_accounting(unsigned long *new_itm)
+{
+        return 0;
+}
+
+struct pv_time_ops pv_time_ops = {
+        .do_steal_accounting = ia64_native_do_steal_accounting,
+};
diff --git a/arch/ia64/kernel/paravirt_inst.h b/arch/ia64/kernel/paravirt_inst.h
new file mode 100644
index 000000000000..5cad6fb2ed19
--- /dev/null
+++ b/arch/ia64/kernel/paravirt_inst.h
@@ -0,0 +1,29 @@
+/******************************************************************************
+ * linux/arch/ia64/xen/paravirt_inst.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifdef __IA64_ASM_PARAVIRTUALIZED_XEN
+#include <asm/xen/inst.h>
+#include <asm/xen/minstate.h>
+#else
+#include <asm/native/inst.h>
+#endif
+
diff --git a/arch/ia64/kernel/paravirtentry.S b/arch/ia64/kernel/paravirtentry.S
new file mode 100644
index 000000000000..2f42fcb9776a
--- /dev/null
+++ b/arch/ia64/kernel/paravirtentry.S
@@ -0,0 +1,60 @@
+/******************************************************************************
+ * linux/arch/ia64/xen/paravirtentry.S
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/asm-offsets.h>
+#include "entry.h"
+
+#define DATA8(sym, init_value)                  \
+        .pushsection .data.read_mostly ;        \
+        .align 8 ;                              \
+        .global sym ;                           \
+        sym: ;                                  \
+        data8 init_value ;                      \
+        .popsection
+
+#define BRANCH(targ, reg, breg)         \
+        movl reg=targ ;                 \
+        ;;                              \
+        ld8 reg=[reg] ;                 \
+        ;;                              \
+        mov breg=reg ;                  \
+        br.cond.sptk.many breg
+
+#define BRANCH_PROC(sym, reg, breg)                             \
+        DATA8(paravirt_ ## sym ## _targ, ia64_native_ ## sym) ; \
+        GLOBAL_ENTRY(paravirt_ ## sym) ;                        \
+                BRANCH(paravirt_ ## sym ## _targ, reg, breg) ;  \
+        END(paravirt_ ## sym)
+
+#define BRANCH_PROC_UNWINFO(sym, reg, breg)                     \
+        DATA8(paravirt_ ## sym ## _targ, ia64_native_ ## sym) ; \
+        GLOBAL_ENTRY(paravirt_ ## sym) ;                        \
+                PT_REGS_UNWIND_INFO(0) ;                        \
+                BRANCH(paravirt_ ## sym ## _targ, reg, breg) ;  \
+        END(paravirt_ ## sym)
+
+
+BRANCH_PROC(switch_to, r22, b7)
+BRANCH_PROC_UNWINFO(leave_syscall, r22, b7)
+BRANCH_PROC(work_processed_syscall, r2, b7)
+BRANCH_PROC_UNWINFO(leave_kernel, r22, b7)
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 19d4493c6193..fc8f3509df27 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2626,7 +2626,7 @@ pfm_task_incompatible(pfm_context_t *ctx, struct task_struct *task)
         /*
          * make sure the task is off any CPU
          */
-        wait_task_inactive(task);
+        wait_task_inactive(task, 0);
 
         /* more to come... */
 
@@ -4774,7 +4774,7 @@ recheck:
 
                 UNPROTECT_CTX(ctx, flags);
 
-                wait_task_inactive(task);
+                wait_task_inactive(task, 0);
 
                 PROTECT_CTX(ctx, flags);
 
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 632cda8f2e76..e5c2de9b29a5 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -51,6 +51,7 @@
 #include <asm/mca.h>
 #include <asm/meminit.h>
 #include <asm/page.h>
+#include <asm/paravirt.h>
 #include <asm/patch.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -341,6 +342,8 @@ reserve_memory (void)
         rsvd_region[n].end   = (unsigned long) ia64_imva(_end);
         n++;
 
+        n += paravirt_reserve_memory(&rsvd_region[n]);
+
 #ifdef CONFIG_BLK_DEV_INITRD
         if (ia64_boot_param->initrd_start) {
                 rsvd_region[n].start = (unsigned long)__va(ia64_boot_param->initrd_start);
@@ -519,6 +522,8 @@ setup_arch (char **cmdline_p)
 {
         unw_init();
 
+        paravirt_arch_setup_early();
+
         ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
 
         *cmdline_p = __va(ia64_boot_param->command_line);
@@ -583,6 +588,9 @@ setup_arch (char **cmdline_p)
         acpi_boot_init();
 #endif
 
+        paravirt_banner();
+        paravirt_arch_setup_console(cmdline_p);
+
 #ifdef CONFIG_VT
         if (!conswitchp) {
 # if defined(CONFIG_DUMMY_CONSOLE)
@@ -602,6 +610,8 @@ setup_arch (char **cmdline_p)
 #endif
 
         /* enable IA-64 Machine Check Abort Handling unless disabled */
+        if (paravirt_arch_setup_nomca())
+                nomca = 1;
         if (!nomca)
                 ia64_mca_init();
 
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 9d1d429c6c59..03f1a9908afc 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -50,6 +50,7 @@
 #include <asm/machvec.h>
 #include <asm/mca.h>
 #include <asm/page.h>
+#include <asm/paravirt.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -642,6 +643,7 @@ void __devinit smp_prepare_boot_cpu(void)
         cpu_set(smp_processor_id(), cpu_online_map);
         cpu_set(smp_processor_id(), cpu_callin_map);
         per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+        paravirt_post_smp_prepare_boot_cpu();
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index 1eda194b9559..bcbb6d8792d3 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -160,7 +160,7 @@ sys_pipe (void)
         int fd[2];
         int retval;
 
-        retval = do_pipe(fd);
+        retval = do_pipe_flags(fd, 0);
         if (retval)
                 goto out;
         retval = fd[0];
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index aad1b7b1fff9..65c10a42c88f 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -24,6 +24,7 @@
 #include <asm/machvec.h>
 #include <asm/delay.h>
 #include <asm/hw_irq.h>
+#include <asm/paravirt.h>
 #include <asm/ptrace.h>
 #include <asm/sal.h>
 #include <asm/sections.h>
@@ -48,6 +49,15 @@ EXPORT_SYMBOL(last_cli_ip);
 
 #endif
 
+#ifdef CONFIG_PARAVIRT
+static void
+paravirt_clocksource_resume(void)
+{
+        if (pv_time_ops.clocksource_resume)
+                pv_time_ops.clocksource_resume();
+}
+#endif
+
 static struct clocksource clocksource_itc = {
         .name           = "itc",
         .rating         = 350,
@@ -56,6 +66,9 @@ static struct clocksource clocksource_itc = {
         .mult           = 0, /*to be calculated*/
         .shift          = 16,
         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+#ifdef CONFIG_PARAVIRT
+        .resume         = paravirt_clocksource_resume,
+#endif
 };
 static struct clocksource *itc_clocksource;
 
@@ -157,6 +170,9 @@ timer_interrupt (int irq, void *dev_id)
 
         profile_tick(CPU_PROFILING);
 
+        if (paravirt_do_steal_accounting(&new_itm))
+                goto skip_process_time_accounting;
+
         while (1) {
                 update_process_times(user_mode(get_irq_regs()));
 
@@ -186,6 +202,8 @@ timer_interrupt (int irq, void *dev_id)
                 local_irq_disable();
         }
 
+skip_process_time_accounting:
+
         do {
                 /*
                  * If we're too close to the next clock tick for
@@ -335,6 +353,11 @@ ia64_init_itm (void)
                  */
                 clocksource_itc.rating = 50;
 
+        paravirt_init_missing_ticks_accounting(smp_processor_id());
+
+        /* avoid softlock up message when cpu is unplug and plugged again. */
+        touch_softlockup_watchdog();
+
         /* Setup the CPU local timer tick */
         ia64_cpu_local_tick();
 
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 5929ab10a289..5a77206c2492 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -4,7 +4,6 @@
 #include <asm/system.h>
 #include <asm/pgtable.h>
 
-#define LOAD_OFFSET     (KERNEL_START - KERNEL_TR_PAGE_SIZE)
 #include <asm-generic/vmlinux.lds.h>
 
 #define IVT_TEXT                                                        \
diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile
index 112791dd2542..bf22fb9e6dcf 100644
--- a/arch/ia64/kvm/Makefile
+++ b/arch/ia64/kvm/Makefile
@@ -43,7 +43,8 @@ $(obj)/$(offsets-file): arch/ia64/kvm/asm-offsets.s
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 EXTRA_AFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+                coalesced_mmio.o)
 
 kvm-objs := $(common-objs) kvm-ia64.o kvm_fw.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 68c978be9a51..7a37d06376be 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -125,9 +125,9 @@ void kvm_arch_hardware_enable(void *garbage)
                                 PAGE_KERNEL));
         local_irq_save(saved_psr);
         slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
+        local_irq_restore(saved_psr);
         if (slot < 0)
                 return;
-        local_irq_restore(saved_psr);
 
         spin_lock(&vp_lock);
         status = ia64_pal_vp_init_env(kvm_vsa_base ?
@@ -160,9 +160,9 @@ void kvm_arch_hardware_disable(void *garbage)
 
         local_irq_save(saved_psr);
         slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
+        local_irq_restore(saved_psr);
         if (slot < 0)
                 return;
-        local_irq_restore(saved_psr);
 
         status = ia64_pal_vp_exit_env(host_iva);
         if (status)
@@ -187,6 +187,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 
                 r = 1;
                 break;
+        case KVM_CAP_COALESCED_MMIO:
+                r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+                break;
         default:
                 r = 0;
         }
@@ -195,11 +198,11 @@ int kvm_dev_ioctl_check_extension(long ext)
 }
 
 static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-                                        gpa_t addr)
+                                        gpa_t addr, int len, int is_write)
 {
         struct kvm_io_device *dev;
 
-        dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr);
+        dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len, is_write);
 
         return dev;
 }
@@ -231,7 +234,7 @@ static int handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
         kvm_run->exit_reason = KVM_EXIT_MMIO;
         return 0;
 mmio:
-        mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr);
+        mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr, p->size, !p->dir);
         if (mmio_dev) {
                 if (!p->dir)
                         kvm_iodevice_write(mmio_dev, p->addr, p->size,
@@ -1035,14 +1038,6 @@ static void kvm_free_vmm_area(void)
         }
 }
 
-/*
- * Make sure that a cpu that is being hot-unplugged does not have any vcpus
- * cached on it. Leave it as blank for IA64.
- */
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 static void vti_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 }
@@ -1258,6 +1253,7 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id)
 uninit:
         kvm_vcpu_uninit(vcpu);
 fail:
+        local_irq_restore(psr);
         return r;
 }
 
@@ -1460,6 +1456,9 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
         return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
 
 long kvm_arch_dev_ioctl(struct file *filp,
                 unsigned int ioctl, unsigned long arg)
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 544dc420c65e..d83125e1ed27 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -36,7 +36,6 @@ struct early_node_data {
         struct ia64_node_data *node_data;
         unsigned long pernode_addr;
         unsigned long pernode_size;
-        struct bootmem_data bootmem_data;
         unsigned long num_physpages;
 #ifdef CONFIG_ZONE_DMA
         unsigned long num_dma_physpages;
@@ -75,17 +74,17 @@ pg_data_t *pgdat_list[MAX_NUMNODES];
 static int __init build_node_maps(unsigned long start, unsigned long len,
                                   int node)
 {
-        unsigned long cstart, epfn, end = start + len;
-        struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+        unsigned long spfn, epfn, end = start + len;
+        struct bootmem_data *bdp = &bootmem_node_data[node];
 
         epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
-        cstart = GRANULEROUNDDOWN(start);
+        spfn = GRANULEROUNDDOWN(start) >> PAGE_SHIFT;
 
         if (!bdp->node_low_pfn) {
-                bdp->node_boot_start = cstart;
+                bdp->node_min_pfn = spfn;
                 bdp->node_low_pfn = epfn;
         } else {
-                bdp->node_boot_start = min(cstart, bdp->node_boot_start);
+                bdp->node_min_pfn = min(spfn, bdp->node_min_pfn);
                 bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
         }
 
@@ -167,7 +166,7 @@ static void __init fill_pernode(int node, unsigned long pernode,
 {
         void *cpu_data;
         int cpus = early_nr_cpus_node(node);
-        struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+        struct bootmem_data *bdp = &bootmem_node_data[node];
 
         mem_data[node].pernode_addr = pernode;
         mem_data[node].pernode_size = pernodesize;
@@ -222,20 +221,21 @@ static void __init fill_pernode(int node, unsigned long pernode,
 static int __init find_pernode_space(unsigned long start, unsigned long len,
                                      int node)
 {
-        unsigned long epfn;
+        unsigned long spfn, epfn;
         unsigned long pernodesize = 0, pernode, pages, mapsize;
-        struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+        struct bootmem_data *bdp = &bootmem_node_data[node];
 
+        spfn = start >> PAGE_SHIFT;
         epfn = (start + len) >> PAGE_SHIFT;
 
-        pages = bdp->node_low_pfn - (bdp->node_boot_start >> PAGE_SHIFT);
+        pages = bdp->node_low_pfn - bdp->node_min_pfn;
         mapsize = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 
         /*
          * Make sure this memory falls within this node's usable memory
          * since we may have thrown some away in build_maps().
          */
-        if (start < bdp->node_boot_start || epfn > bdp->node_low_pfn)
+        if (spfn < bdp->node_min_pfn || epfn > bdp->node_low_pfn)
                 return 0;
 
         /* Don't setup this node's local space twice... */
@@ -297,7 +297,7 @@ static void __init reserve_pernode_space(void)
                 bdp = pdp->bdata;
 
                 /* First the bootmem_map itself */
-                pages = bdp->node_low_pfn - (bdp->node_boot_start>>PAGE_SHIFT);
+                pages = bdp->node_low_pfn - bdp->node_min_pfn;
                 size = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
                 base = __pa(bdp->node_bootmem_map);
                 reserve_bootmem_node(pdp, base, size, BOOTMEM_DEFAULT);
@@ -440,7 +440,7 @@ void __init find_memory(void)
         efi_memmap_walk(find_max_min_low_pfn, NULL);
 
         for_each_online_node(node)
-                if (mem_data[node].bootmem_data.node_low_pfn) {
+                if (bootmem_node_data[node].node_low_pfn) {
                         node_clear(node, memory_less_mask);
                         mem_data[node].min_pfn = ~0UL;
                 }
@@ -460,14 +460,14 @@ void __init find_memory(void)
                 else if (node_isset(node, memory_less_mask))
                         continue;
 
-                bdp = &mem_data[node].bootmem_data;
+                bdp = &bootmem_node_data[node];
                 pernode = mem_data[node].pernode_addr;
                 pernodesize = mem_data[node].pernode_size;
                 map = pernode + pernodesize;
 
                 init_bootmem_node(pgdat_list[node],
                                   map>>PAGE_SHIFT,
-                                  bdp->node_boot_start>>PAGE_SHIFT,
+                                  bdp->node_min_pfn,
                                   bdp->node_low_pfn);
         }
 
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index d3ce8f3bcaa6..c45fc7f5a979 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -24,7 +24,7 @@
 unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT;
 
 pte_t *
-huge_pte_alloc (struct mm_struct *mm, unsigned long addr)
+huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
 {
         unsigned long taddr = htlbpage_to_page(addr);
         pgd_t *pgd;
@@ -75,7 +75,8 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
  * Don't actually need to do any preparation, but need to make sure
  * the address is in the right region.
  */
-int prepare_hugepage_range(unsigned long addr, unsigned long len)
+int prepare_hugepage_range(struct file *file,
+                        unsigned long addr, unsigned long len)
 {
         if (len & ~HPAGE_MASK)
                 return -EINVAL;
@@ -106,13 +107,19 @@ int pmd_huge(pmd_t pmd)
 {
         return 0;
 }
+
+int pud_huge(pud_t pud)
+{
+        return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write)
 {
         return NULL;
 }
 
-void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb,
                         unsigned long addr, unsigned long end,
                         unsigned long floor, unsigned long ceiling)
 {
@@ -149,7 +156,7 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, u
 
         /* Handle MAP_FIXED */
         if (flags & MAP_FIXED) {
-                if (prepare_hugepage_range(addr, len))
+                if (prepare_hugepage_range(file, addr, len))
                         return -EINVAL;
                 return addr;
         }
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 52175af299a0..53ebb6484495 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -350,7 +350,7 @@ void sn_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 }
 EXPORT_SYMBOL(sn_dma_sync_sg_for_device);
 
-int sn_dma_mapping_error(dma_addr_t dma_addr)
+int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
         return 0;
 }
diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c
index 600d40e33495..d394292498c0 100644
--- a/arch/m32r/boot/compressed/misc.c
+++ b/arch/m32r/boot/compressed/misc.c
@@ -70,8 +70,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static unsigned char *input_data;
 static int input_len;
@@ -82,9 +80,6 @@ static unsigned long output_ptr = 0;
 
 #include "m32r_sio.c"
 
-static void *malloc(int size);
-static void free(void *where);
-
 static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
@@ -92,38 +87,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-        void *p;
-
-        if (size <0) error("Malloc error");
-        if (free_mem_ptr == 0) error("Memory error");
-
-        free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
-        p = (void *)free_mem_ptr;
-        free_mem_ptr += size;
-
-        if (free_mem_ptr >= free_mem_end_ptr)
-                error("Out of memory");
-
-        return p;
-}
-
-static void free(void *where)
-{       /* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-        *ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-        free_mem_ptr = (long) *ptr;
-}
-
 void* memset(void* s, int c, size_t n)
 {
         int i;
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index 07c1af7dc0e2..cbc3c4c54566 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -20,7 +20,6 @@ extern char _end[];
 
 struct pglist_data *node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
-static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
 
 pg_data_t m32r_node_data[MAX_NUMNODES];
 
@@ -81,7 +80,7 @@ unsigned long __init setup_memory(void)
         for_each_online_node(nid) {
                 mp = &mem_prof[nid];
                 NODE_DATA(nid)=(pg_data_t *)&m32r_node_data[nid];
-                NODE_DATA(nid)->bdata = &node_bdata[nid];
+                NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
                 min_pfn = mp->start_pfn;
                 max_pfn = mp->start_pfn + mp->pages;
                 bootmap_size = init_bootmem_node(NODE_DATA(nid), mp->free_pfn,
@@ -124,8 +123,7 @@ unsigned long __init setup_memory(void)
         return max_low_pfn;
 }
 
-#define START_PFN(nid)  \
-        (NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN(nid)          (NODE_DATA(nid)->bdata->node_min_pfn)
 #define MAX_LOW_PFN(nid)        (NODE_DATA(nid)->bdata->node_low_pfn)
 
 unsigned long __init zone_sizes_init(void)
@@ -148,8 +146,7 @@ unsigned long __init zone_sizes_init(void)
                 zholes_size[ZONE_DMA] = mp->holes;
                 holes += zholes_size[ZONE_DMA];
 
-                free_area_init_node(nid, NODE_DATA(nid), zones_size,
-                        start_pfn, zholes_size);
+                free_area_init_node(nid, zones_size, start_pfn, zholes_size);
         }
 
         /*
@@ -163,4 +160,3 @@ unsigned long __init zone_sizes_init(void)
 
         return holes;
 }
-
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index bbd97c85bc5d..24d429f9358a 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -36,42 +36,6 @@ pgd_t swapper_pg_dir[1024];
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-void show_mem(void)
-{
-        int total = 0, reserved = 0;
-        int shared = 0, cached = 0;
-        int highmem = 0;
-        struct page *page;
-        pg_data_t *pgdat;
-        unsigned long i;
-
-        printk("Mem-info:\n");
-        show_free_areas();
-        printk("Free swap:       %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
-        for_each_online_pgdat(pgdat) {
-                unsigned long flags;
-                pgdat_resize_lock(pgdat, &flags);
-                for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-                        page = pgdat_page_nr(pgdat, i);
-                        total++;
-                        if (PageHighMem(page))
-                                highmem++;
-                        if (PageReserved(page))
-                                reserved++;
-                        else if (PageSwapCache(page))
-                                cached++;
-                        else if (page_count(page))
-                                shared += page_count(page) - 1;
-                }
-                pgdat_resize_unlock(pgdat, &flags);
-        }
-        printk("%d pages of RAM\n", total);
-        printk("%d pages of HIGHMEM\n",highmem);
-        printk("%d reserved pages\n",reserved);
-        printk("%d pages shared\n",shared);
-        printk("%d pages swap cached\n",cached);
-}
-
 /*
  * Cache of MMU context last used.
  */
@@ -93,8 +57,7 @@ void free_initrd_mem(unsigned long, unsigned long);
 #endif
 
 /* It'd be good if these lines were in the standard header file. */
-#define START_PFN(nid)  \
-        (NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN(nid)          (NODE_DATA(nid)->bdata->node_min_pfn)
 #define MAX_LOW_PFN(nid)        (NODE_DATA(nid)->bdata->node_low_pfn)
 
 #ifndef CONFIG_DISCONTIGMEM
@@ -123,7 +86,7 @@ unsigned long __init zone_sizes_init(void)
         start_pfn = __MEMORY_START >> PAGE_SHIFT;
 #endif /* CONFIG_MMU */
 
-        free_area_init_node(0, NODE_DATA(0), zones_size, start_pfn, 0);
+        free_area_init_node(0, zones_size, start_pfn, 0);
 
         return 0;
 }
@@ -252,4 +215,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
         printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
 }
 #endif
-
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 55ea52fe6aca..8c5e1de68fcb 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -490,28 +490,6 @@ config ATARI_MFPSER
           Note for Falcon users: You also have an MFP port, it's just not
           wired to the outside... But you could use the port under Linux.
 
-config ATARI_SCC
-        tristate "Atari SCC serial support"
-        depends on ATARI
-        ---help---
-          If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
-          LAN) and like to use them under Linux, say Y. All built-in SCC's are
-          supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
-          two connectors for channel A (Serial2 and LAN), they are visible as
-          two separate devices.
-
-          To compile this driver as a module, choose M here.
-
-config ATARI_SCC_DMA
-        bool "Atari SCC serial DMA support"
-        depends on ATARI_SCC
-        help
-          This enables DMA support for receiving data on channel A of the SCC.
-          If you have a TT you may say Y here and read
-          drivers/char/atari_SCC.README. All other users should say N here,
-          because only the TT has SCC-DMA, even if your machine keeps claiming
-          so at boot time.
-
 config ATARI_MIDI
         tristate "Atari MIDI serial support"
         depends on ATARI
@@ -578,18 +556,6 @@ config MAC_HID
         depends on INPUT_ADBHID
         default y
 
-config ADB_KEYBOARD
-        bool "Support for ADB keyboard (old driver)"
-        depends on MAC && !INPUT_ADBHID
-        help
-          This option allows you to use an ADB keyboard attached to your
-          machine. Note that this disables any other (ie. PS/2) keyboard
-          support, even if your machine is physically capable of using both at
-          the same time.
-
-          If you use an ADB keyboard (4 pin connector), say Y here.
-          If you use a PS/2 keyboard (6 pin connector), say N here.
-
 config HPDCA
         tristate "HP DCA serial support"
         depends on DIO && SERIAL_8250
@@ -640,7 +606,7 @@ config DN_SERIAL
 
 config SERIAL_CONSOLE
         bool "Support for serial port console"
-        depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+        depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
         ---help---
           If you say Y here, it will be possible to use a serial port as the
           system console (the system console is the device which receives all
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index b15173f28a23..8133dbc44964 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -13,7 +13,7 @@
 # Copyright (C) 1994 by Hamish Macdonald
 #
 
-KBUILD_DEFCONFIG := amiga_defconfig
+KBUILD_DEFCONFIG := multi_defconfig
 
 # override top level makefile
 AS += -m68020
diff --git a/arch/m68k/amiga/chipram.c b/arch/m68k/amiga/chipram.c
index cbe36538af47..61df1d33c050 100644
--- a/arch/m68k/amiga/chipram.c
+++ b/arch/m68k/amiga/chipram.c
@@ -9,6 +9,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 50f5daab46b7..df679d96b1cb 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -36,14 +36,11 @@
 #include <asm/machdep.h>
 #include <asm/io.h>
 
-unsigned long amiga_model;
-EXPORT_SYMBOL(amiga_model);
+static unsigned long amiga_model;
 
 unsigned long amiga_eclock;
 EXPORT_SYMBOL(amiga_eclock);
 
-unsigned long amiga_masterclock;
-
 unsigned long amiga_colorclock;
 EXPORT_SYMBOL(amiga_colorclock);
 
@@ -51,7 +48,9 @@ unsigned long amiga_chipset;
 EXPORT_SYMBOL(amiga_chipset);
 
 unsigned char amiga_vblank;
-unsigned char amiga_psfreq;
+EXPORT_SYMBOL(amiga_vblank);
+
+static unsigned char amiga_psfreq;
 
 struct amiga_hw_present amiga_hw_present;
 EXPORT_SYMBOL(amiga_hw_present);
@@ -92,8 +91,6 @@ static char *amiga_models[] __initdata = {
 static char amiga_model_name[13] = "Amiga ";
 
 static void amiga_sched_init(irq_handler_t handler);
-/* amiga specific irq functions */
-extern void amiga_init_IRQ(void);
 static void amiga_get_model(char *model);
 static int amiga_get_hardware_list(char *buffer);
 /* amiga specific timer functions */
@@ -107,8 +104,6 @@ static void amiga_reset(void);
 extern void amiga_init_sound(void);
 static void amiga_mem_console_write(struct console *co, const char *b,
                                     unsigned int count);
-void amiga_serial_console_write(struct console *co, const char *s,
-                                unsigned int count);
 #ifdef CONFIG_HEARTBEAT
 static void amiga_heartbeat(int on);
 #endif
@@ -418,8 +413,7 @@ void __init config_amiga(void)
         mach_heartbeat = amiga_heartbeat;
 #endif
 
-        /* Fill in the clock values (based on the 700 kHz E-Clock) */
-        amiga_masterclock = 40*amiga_eclock;    /* 28 MHz */
+        /* Fill in the clock value (based on the 700 kHz E-Clock) */
         amiga_colorclock = 5*amiga_eclock;      /* 3.5 MHz */
 
         /* clear all DMA bits */
@@ -817,8 +811,8 @@ static void amiga_serial_putc(char c)
                 ;
 }
 
-void amiga_serial_console_write(struct console *co, const char *s,
-                                unsigned int count)
+static void amiga_serial_console_write(struct console *co, const char *s,
+                                       unsigned int count)
 {
         while (count--) {
                 if (*s == '\n')
@@ -827,7 +821,7 @@ void amiga_serial_console_write(struct console *co, const char *s,
         }
 }
 
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
 void amiga_serial_puts(const char *s)
 {
         amiga_serial_console_write(NULL, s, strlen(s));
diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index 043ddbc61c7b..702b15ccfab7 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -20,14 +20,6 @@
 #include <asm/atarihw.h>
 #include <asm/atariints.h>
 
-/* Flag that Modem1 port is already initialized and used */
-int atari_MFP_init_done;
-EXPORT_SYMBOL(atari_MFP_init_done);
-
-/* Flag that Modem1 port is already initialized and used */
-int atari_SCC_init_done;
-EXPORT_SYMBOL(atari_SCC_init_done);
-
 /* Can be set somewhere, if a SCC master reset has already be done and should
  * not be repeated; used by kgdb */
 int atari_SCC_reset_done;
@@ -47,8 +39,8 @@ static inline void ata_mfp_out(char c)
         mfp.usart_dta = c;
 }
 
-void atari_mfp_console_write(struct console *co, const char *str,
-                             unsigned int count)
+static void atari_mfp_console_write(struct console *co, const char *str,
+                                    unsigned int count)
 {
         while (count--) {
                 if (*str == '\n')
@@ -66,8 +58,8 @@ static inline void ata_scc_out(char c)
         scc.cha_b_data = c;
 }
 
-void atari_scc_console_write(struct console *co, const char *str,
-                             unsigned int count)
+static void atari_scc_console_write(struct console *co, const char *str,
+                                    unsigned int count)
 {
         while (count--) {
                 if (*str == '\n')
@@ -83,8 +75,8 @@ static inline void ata_midi_out(char c)
         acia.mid_data = c;
 }
 
-void atari_midi_console_write(struct console *co, const char *str,
-                              unsigned int count)
+static void atari_midi_console_write(struct console *co, const char *str,
+                                     unsigned int count)
 {
         while (count--) {
                 if (*str == '\n')
@@ -136,7 +128,7 @@ static void atari_par_console_write(struct console *co, const char *str,
         }
 }
 
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
 int atari_mfp_console_wait_key(struct console *co)
 {
         while (!(mfp.rcv_stat & 0x80))  /* wait for rx buf filled */
@@ -166,11 +158,7 @@ int atari_midi_console_wait_key(struct console *co)
  * SCC serial ports. They're used by the debugging interface, kgdb, and the
  * serial console code.
  */
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_mfp_port(int cflag)
-#else
-void atari_init_mfp_port(int cflag)
-#endif
 {
         /*
          * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
@@ -193,8 +181,6 @@ void atari_init_mfp_port(int cflag)
         mfp.tim_dt_d = baud_table[baud];
         mfp.tim_ct_cd |= 0x01;          /* start timer D, 1:4 */
         mfp.trn_stat |= 0x01;           /* enable TX */
-
-        atari_MFP_init_done = 1;
 }
 
 #define SCC_WRITE(reg, val)                             \
@@ -214,11 +200,7 @@ void atari_init_mfp_port(int cflag)
                         MFPDELAY();                     \
         } while (0)
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_scc_port(int cflag)
-#else
-void atari_init_scc_port(int cflag)
-#endif
 {
         extern int atari_SCC_reset_done;
         static int clksrc_table[9] =
@@ -277,14 +259,9 @@ void atari_init_scc_port(int cflag)
         SCC_WRITE(5, reg5 | 8);
 
         atari_SCC_reset_done = 1;
-        atari_SCC_init_done = 1;
 }
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_midi_port(int cflag)
-#else
-void atari_init_midi_port(int cflag)
-#endif
 {
         int baud = cflag & CBAUD;
         int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
diff --git a/arch/m68k/fpsp040/Makefile b/arch/m68k/fpsp040/Makefile
index 0214d2f6f8b0..9506d883ace5 100644
--- a/arch/m68k/fpsp040/Makefile
+++ b/arch/m68k/fpsp040/Makefile
@@ -10,7 +10,6 @@ obj-y    := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
             x_bsun.o x_fline.o x_operr.o x_ovfl.o x_snan.o x_store.o \
             x_unfl.o x_unimp.o x_unsupp.o bugfix.o skeleton.o
 
-EXTRA_AFLAGS := -traditional
 EXTRA_LDFLAGS := -x
 
 $(OS_OBJS): fpsp.h
diff --git a/arch/m68k/ifpsp060/Makefile b/arch/m68k/ifpsp060/Makefile
index 2fe8472cb5e3..43b435049452 100644
--- a/arch/m68k/ifpsp060/Makefile
+++ b/arch/m68k/ifpsp060/Makefile
@@ -6,5 +6,4 @@
 
 obj-y := fskeleton.o iskeleton.o os.o
 
-EXTRA_AFLAGS := -traditional
 EXTRA_LDFLAGS := -x
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 7a62a718143b..3a7f62225504 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -16,5 +16,3 @@ devres-y = ../../../kernel/irq/devres.o
 
 obj-$(CONFIG_PCI)       += bios32.o
 obj-y$(CONFIG_MMU_SUN3) += dma.o        # no, it's not a typo
-
-EXTRA_AFLAGS := -traditional
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index a9fb83a8c180..ea1e44da19b9 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -26,6 +26,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/setup.h>
+#include <asm/fpu.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
@@ -40,6 +41,11 @@
 #include <asm/dvma.h>
 #endif
 
+#if !FPSTATESIZE || !NR_IRQS
+#warning No CPU/platform type selected, your kernel will not work!
+#warning Are you building an allnoconfig kernel?
+#endif
+
 unsigned long m68k_machtype;
 EXPORT_SYMBOL(m68k_machtype);
 unsigned long m68k_cputype;
@@ -116,6 +122,7 @@ extern int bvme6000_parse_bootinfo(const struct bi_record *);
 extern int mvme16x_parse_bootinfo(const struct bi_record *);
 extern int mvme147_parse_bootinfo(const struct bi_record *);
 extern int hp300_parse_bootinfo(const struct bi_record *);
+extern int apollo_parse_bootinfo(const struct bi_record *);
 
 extern void config_amiga(void);
 extern void config_atari(void);
@@ -183,6 +190,8 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
                                 unknown = mvme147_parse_bootinfo(record);
                         else if (MACH_IS_HP300)
                                 unknown = hp300_parse_bootinfo(record);
+                        else if (MACH_IS_APOLLO)
+                                unknown = apollo_parse_bootinfo(record);
                         else
                                 unknown = 1;
                 }
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 7537cc5e6159..99b0784c0552 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -1,6 +1,7 @@
 /* ld script to make m68k Linux kernel */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -41,7 +42,7 @@ SECTIONS
   _edata = .;                   /* End of data section */
 
   /* will be freed after init */
-  . = ALIGN(4096);              /* Init code and data */
+  . = ALIGN(PAGE_SIZE);         /* Init code and data */
   __init_begin = .;
   .init.text : {
         _sinittext = .;
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index cdc313e7c299..8a4919e4d36a 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -1,6 +1,7 @@
 /* ld script to make m68k Linux kernel */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -34,7 +35,7 @@ SECTIONS
   _edata = .;
 
   /* will be freed after init */
-  . = ALIGN(8192);      /* Init code and data */
+  . = ALIGN(PAGE_SIZE); /* Init code and data */
 __init_begin = .;
         .init.text : {
                 _sinittext = .;
@@ -61,12 +62,12 @@ __init_begin = .;
         }
         SECURITY_INIT
 #ifdef CONFIG_BLK_DEV_INITRD
-        . = ALIGN(8192);
+        . = ALIGN(PAGE_SIZE);
         __initramfs_start = .;
         .init.ramfs : { *(.init.ramfs) }
         __initramfs_end = .;
 #endif
-        . = ALIGN(8192);
+        . = ALIGN(PAGE_SIZE);
         __init_end = .;
         .data.init.task : { *(.data.init_task) }
 
diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile
index a18af095cd7c..af9abf8d9d98 100644
--- a/arch/m68k/lib/Makefile
+++ b/arch/m68k/lib/Makefile
@@ -2,7 +2,5 @@
 # Makefile for m68k-specific library files..
 #
 
-EXTRA_AFLAGS := -traditional
-
 lib-y   := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
            checksum.o string.o uaccess.o
diff --git a/arch/m68k/mac/Makefile b/arch/m68k/mac/Makefile
index 1d265ba365ad..daebd80bdef0 100644
--- a/arch/m68k/mac/Makefile
+++ b/arch/m68k/mac/Makefile
@@ -2,5 +2,5 @@
 # Makefile for Linux arch/m68k/mac source directory
 #
 
-obj-y           := config.o bootparse.o macints.o iop.o via.o oss.o psc.o \
+obj-y           := config.o macints.o iop.o via.o oss.o psc.o \
                         baboon.o macboing.o debug.o misc.o
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index 673a1085984d..dae9c982aa89 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -23,9 +23,7 @@
 /* #define DEBUG_IRQS */
 
 int baboon_present;
-volatile struct baboon *baboon;
-
-irqreturn_t baboon_irq(int, void *);
+static volatile struct baboon *baboon;
 
 #if 0
 extern int macide_ack_intr(struct ata_channel *);
@@ -50,20 +48,10 @@ void __init baboon_init(void)
 }
 
 /*
- * Register the Baboon interrupt dispatcher on nubus slot $C.
- */
-
-void __init baboon_register_interrupts(void)
-{
-        request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
-                    "baboon", (void *) baboon);
-}
-
-/*
  * Baboon interrupt handler. This works a lot like a VIA.
  */
 
-irqreturn_t baboon_irq(int irq, void *dev_id)
+static irqreturn_t baboon_irq(int irq, void *dev_id)
 {
         int irq_bit, irq_num;
         unsigned char events;
@@ -95,6 +83,16 @@ irqreturn_t baboon_irq(int irq, void *dev_id)
         return IRQ_HANDLED;
 }
 
+/*
+ * Register the Baboon interrupt dispatcher on nubus slot $C.
+ */
+
+void __init baboon_register_interrupts(void)
+{
+        request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
+                    "baboon", (void *) baboon);
+}
+
 void baboon_irq_enable(int irq) {
 #ifdef DEBUG_IRQUSE
         printk("baboon_irq_enable(%d)\n", irq);
diff --git a/arch/m68k/mac/bootparse.c b/arch/m68k/mac/bootparse.c
deleted file mode 100644
index 36d223609823..000000000000
--- a/arch/m68k/mac/bootparse.c
+++ /dev/null
@@ -1,122 +0,0 @@
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-#include <asm/macintosh.h>
-
-/*
- *      Booter vars
- */
-
-int boothowto;
-int _boothowto;
-
-/*
- *      Called early to parse the environment (passed to us from the booter)
- *      into a bootinfo struct. Will die as soon as we have our own booter
- */
-
-#define atol(x) simple_strtoul(x,NULL,0)
-
-void parse_booter(char *env)
-{
-        char *name;
-        char *value;
-#if 0
-        while(0 && *env)
-#else
-        while(*env)
-#endif
-        {
-                name=env;
-                value=name;
-                while(*value!='='&&*value)
-                        value++;
-                if(*value=='=')
-                        *value++=0;
-                env=value;
-                while(*env)
-                        env++;
-                env++;
-#if 0
-                if(strcmp(name,"VIDEO_ADDR")==0)
-                        mac_mch.videoaddr=atol(value);
-                if(strcmp(name,"ROW_BYTES")==0)
-                        mac_mch.videorow=atol(value);
-                if(strcmp(name,"SCREEN_DEPTH")==0)
-                        mac_mch.videodepth=atol(value);
-                if(strcmp(name,"DIMENSIONS")==0)
-                        mac_mch.dimensions=atol(value);
-#endif
-                if(strcmp(name,"BOOTTIME")==0)
-                        mac_bi_data.boottime=atol(value);
-                if(strcmp(name,"GMTBIAS")==0)
-                        mac_bi_data.gmtbias=atol(value);
-                if(strcmp(name,"BOOTERVER")==0)
-                        mac_bi_data.bootver=atol(value);
-                if(strcmp(name,"MACOS_VIDEO")==0)
-                        mac_bi_data.videological=atol(value);
-                if(strcmp(name,"MACOS_SCC")==0)
-                        mac_bi_data.sccbase=atol(value);
-                if(strcmp(name,"MACHINEID")==0)
-                        mac_bi_data.id=atol(value);
-                if(strcmp(name,"MEMSIZE")==0)
-                        mac_bi_data.memsize=atol(value);
-                if(strcmp(name,"SERIAL_MODEM_FLAGS")==0)
-                        mac_bi_data.serialmf=atol(value);
-                if(strcmp(name,"SERIAL_MODEM_HSKICLK")==0)
-                        mac_bi_data.serialhsk=atol(value);
-                if(strcmp(name,"SERIAL_MODEM_GPICLK")==0)
-                        mac_bi_data.serialgpi=atol(value);
-                if(strcmp(name,"SERIAL_PRINT_FLAGS")==0)
-                        mac_bi_data.printmf=atol(value);
-                if(strcmp(name,"SERIAL_PRINT_HSKICLK")==0)
-                        mac_bi_data.printhsk=atol(value);
-                if(strcmp(name,"SERIAL_PRINT_GPICLK")==0)
-                        mac_bi_data.printgpi=atol(value);
-                if(strcmp(name,"PROCESSOR")==0)
-                        mac_bi_data.cpuid=atol(value);
-                if(strcmp(name,"ROMBASE")==0)
-                        mac_bi_data.rombase=atol(value);
-                if(strcmp(name,"TIMEDBRA")==0)
-                        mac_bi_data.timedbra=atol(value);
-                if(strcmp(name,"ADBDELAY")==0)
-                        mac_bi_data.adbdelay=atol(value);
-        }
-#if 0   /* XXX: TODO with m68k_mach_* */
-        /* Fill in the base stuff */
-        boot_info.machtype=MACH_MAC;
-        /* Read this from the macinfo we got ! */
-/*      boot_info.cputype=CPU_68020|FPUB_68881;*/
-/*      boot_info.memory[0].addr=0;*/
-/*      boot_info.memory[0].size=((mac_bi_data.id>>7)&31)<<20;*/
-        boot_info.num_memory=1;         /* On a MacII */
-        boot_info.ramdisk_size=0;       /* For now */
-        *boot_info.command_line=0;
-#endif
- }
-
-
-void print_booter(char *env)
-{
-        char *name;
-        char *value;
-        while(*env)
-        {
-                name=env;
-                value=name;
-                while(*value!='='&&*value)
-                        value++;
-                if(*value=='=')
-                        *value++=0;
-                env=value;
-                while(*env)
-                        env++;
-                env++;
-                printk("%s=%s\n", name,value);
-        }
- }
-
-
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index ad3e3bacae39..c45e18449f32 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -46,7 +46,6 @@
 /* Mac bootinfo struct */
 
 struct mac_booter_data mac_bi_data;
-int mac_bisize = sizeof mac_bi_data;
 
 /* New m68k bootinfo stuff and videobase */
 
@@ -55,10 +54,8 @@ extern struct mem_info m68k_memory[NUM_MEMINFO];
 
 extern struct mem_info m68k_ramdisk;
 
-void *mac_env;                                  /* Loaded by the boot asm */
-
 /* The phys. video addr. - might be bogus on some machines */
-unsigned long mac_orig_videoaddr;
+static unsigned long mac_orig_videoaddr;
 
 /* Mac specific timer functions */
 extern unsigned long mac_gettimeoffset(void);
@@ -79,6 +76,8 @@ extern void mac_mksound(unsigned int, unsigned int);
 extern void nubus_sweep_video(void);
 
 static void mac_get_model(char *str);
+static void mac_identify(void);
+static void mac_report_hardware(void);
 
 static void __init mac_sched_init(irq_handler_t vector)
 {
@@ -765,7 +764,7 @@ static struct mac_model mac_data_table[] = {
         }
 };
 
-void __init mac_identify(void)
+static void __init mac_identify(void)
 {
         struct mac_model *m;
 
@@ -821,7 +820,7 @@ void __init mac_identify(void)
         baboon_init();
 }
 
-void __init mac_report_hardware(void)
+static void __init mac_report_hardware(void)
 {
         printk(KERN_INFO "Apple Macintosh %s\n", macintosh_config->name);
 }
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
index e8a57138b4a6..2165740786a5 100644
--- a/arch/m68k/mac/debug.c
+++ b/arch/m68k/mac/debug.c
@@ -51,6 +51,8 @@ extern void mac_serial_print(const char *);
 static int peng, line;
 #endif
 
+#if 0
+
 void mac_debugging_short(int pos, short num)
 {
 #ifdef DEBUG_SCREEN
@@ -125,6 +127,8 @@ void mac_debugging_long(int pos, long addr)
 #endif
 }
 
+#endif  /*  0  */
+
 #ifdef DEBUG_SERIAL
 /*
  * TODO: serial debug code
@@ -142,12 +146,6 @@ struct mac_SCC {
 
 # define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
 
-/* Flag that serial port is already initialized and used */
-int mac_SCC_init_done;
-/* Can be set somewhere, if a SCC master reset has already be done and should
- * not be repeated; used by kgdb */
-int mac_SCC_reset_done;
-
 static int scc_port = -1;
 
 static struct console mac_console_driver = {
@@ -171,8 +169,8 @@ static struct console mac_console_driver = {
  * this driver if Mac.
  */
 
-void mac_debug_console_write(struct console *co, const char *str,
-                             unsigned int count)
+static void mac_debug_console_write(struct console *co, const char *str,
+                                    unsigned int count)
 {
         mac_serial_print(str);
 }
@@ -209,8 +207,8 @@ static inline void mac_scca_out(char c)
         scc.cha_a_data = c;
 }
 
-void mac_sccb_console_write(struct console *co, const char *str,
-                            unsigned int count)
+static void mac_sccb_console_write(struct console *co, const char *str,
+                                   unsigned int count)
 {
         while (count--) {
                 if (*str == '\n')
@@ -219,8 +217,8 @@ void mac_sccb_console_write(struct console *co, const char *str,
         }
 }
 
-void mac_scca_console_write(struct console *co, const char *str,
-                            unsigned int count)
+static void mac_scca_console_write(struct console *co, const char *str,
+                                   unsigned int count)
 {
         while (count--) {
                 if (*str == '\n')
@@ -265,14 +263,8 @@ void mac_scca_console_write(struct console *co, const char *str,
                     barrier();                          \
         } while(0)
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init mac_init_scc_port(int cflag, int port)
-#else
-void mac_init_scc_port(int cflag, int port)
-#endif
 {
-        extern int mac_SCC_reset_done;
-
         /*
          * baud rates: 1200, 1800, 2400, 4800, 9600, 19.2k, 38.4k, 57.6k, 115.2k
          */
@@ -340,22 +332,9 @@ void mac_init_scc_port(int cflag, int port)
                 SCCA_WRITE(3, reg3 | 1);
                 SCCA_WRITE(5, reg5 | 8);
         }
-
-        mac_SCC_reset_done = 1;
-        mac_SCC_init_done = 1;
 }
 #endif /* DEBUG_SERIAL */
 
-void mac_init_scca_port(int cflag)
-{
-        mac_init_scc_port(cflag, 0);
-}
-
-void mac_init_sccb_port(int cflag)
-{
-        mac_init_scc_port(cflag, 1);
-}
-
 static int __init mac_debug_setup(char *arg)
 {
         if (!MACH_IS_MAC)
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index 3c943d2ec570..43d83e054b8e 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -30,8 +30,8 @@
 int oss_present;
 volatile struct mac_oss *oss;
 
-irqreturn_t oss_irq(int, void *);
-irqreturn_t oss_nubus_irq(int, void *);
+static irqreturn_t oss_irq(int, void *);
+static irqreturn_t oss_nubus_irq(int, void *);
 
 extern irqreturn_t via1_irq(int, void *);
 extern irqreturn_t mac_scc_dispatch(int, void *);
@@ -92,7 +92,7 @@ void __init oss_nubus_init(void)
  * and SCSI; everything else is routed to its own autovector IRQ.
  */
 
-irqreturn_t oss_irq(int irq, void *dev_id)
+static irqreturn_t oss_irq(int irq, void *dev_id)
 {
         int events;
 
@@ -126,7 +126,7 @@ irqreturn_t oss_irq(int irq, void *dev_id)
  * Unlike the VIA/RBV this is on its own autovector interrupt level.
  */
 
-irqreturn_t oss_nubus_irq(int irq, void *dev_id)
+static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
 {
         int events, irq_bit, i;
 
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index d66f723b17c3..f84a4dd64f94 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -36,7 +36,7 @@ irqreturn_t psc_irq(int, void *);
  * Debugging dump, used in various places to see what's going on.
  */
 
-void psc_debug_dump(void)
+static void psc_debug_dump(void)
 {
         int     i;
 
@@ -55,7 +55,7 @@ void psc_debug_dump(void)
  * expanded to cover what I think are the other 7 channels.
  */
 
-void psc_dma_die_die_die(void)
+static void psc_dma_die_die_die(void)
 {
         int i;
 
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index fa485df4160e..f3b27d04a31f 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -45,7 +45,7 @@ volatile long *via_memory_bogon=(long *)&via_memory_bogon;
 int rbv_present;
 int via_alt_mapping;
 EXPORT_SYMBOL(via_alt_mapping);
-__u8 rbv_clear;
+static __u8 rbv_clear;
 
 /*
  * Globals for accessing the VIA chip registers without having to
diff --git a/arch/m68k/math-emu/Makefile b/arch/m68k/math-emu/Makefile
index 539940401814..a0935bf98362 100644
--- a/arch/m68k/math-emu/Makefile
+++ b/arch/m68k/math-emu/Makefile
@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_AFLAGS := -traditional
-
 #EXTRA_AFLAGS += -DFPU_EMU_DEBUG
 #EXTRA_CFLAGS += -DFPU_EMU_DEBUG
 
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index d8fb9c5303cc..81bb08ceec18 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -32,8 +32,6 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-static bootmem_data_t __initdata bootmem_data[MAX_NUMNODES];
-
 pg_data_t pg_data_map[MAX_NUMNODES];
 EXPORT_SYMBOL(pg_data_map);
 
@@ -58,7 +56,7 @@ void __init m68k_setup_node(int node)
                 pg_data_table[i] = pg_data_map + node;
         }
 #endif
-        pg_data_map[node].bdata = bootmem_data + node;
+        pg_data_map[node].bdata = bootmem_node_data + node;
         node_set_online(node);
 }
 
@@ -71,36 +69,6 @@ void __init m68k_setup_node(int node)
 void *empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);
 
-void show_mem(void)
-{
-        pg_data_t *pgdat;
-        int free = 0, total = 0, reserved = 0, shared = 0;
-        int cached = 0;
-        int i;
-
-        printk("\nMem-info:\n");
-        show_free_areas();
-        for_each_online_pgdat(pgdat) {
-                for (i = 0; i < pgdat->node_spanned_pages; i++) {
-                        struct page *page = pgdat->node_mem_map + i;
-                        total++;
-                        if (PageReserved(page))
-                                reserved++;
-                        else if (PageSwapCache(page))
-                                cached++;
-                        else if (!page_count(page))
-                                free++;
-                        else
-                                shared += page_count(page) - 1;
-                }
-        }
-        printk("%d pages of RAM\n",total);
-        printk("%d free pages\n",free);
-        printk("%d reserved pages\n",reserved);
-        printk("%d pages shared\n",shared);
-        printk("%d pages swap cached\n",cached);
-}
-
 extern void init_pointer_table(unsigned long ptable);
 
 /* References to section boundaries */
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 30d34f285024..c5dbb9bdb322 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -285,7 +285,6 @@ void __init paging_init(void)
          * to a couple of allocated pages
          */
         empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-        memset(empty_zero_page, 0, PAGE_SIZE);
 
         /*
          * Set up SFC/DFC registers
@@ -297,7 +296,7 @@ void __init paging_init(void)
 #endif
         for (i = 0; i < m68k_num_memory; i++) {
                 zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
-                free_area_init_node(i, pg_data_map + i, zones_size,
+                free_area_init_node(i, zones_size,
                                     m68k_memory[i].addr >> PAGE_SHIFT, NULL);
         }
 }
diff --git a/arch/m68k/mm/sun3mmu.c b/arch/m68k/mm/sun3mmu.c
index 6a6513aa1ce8..1b902dbd4376 100644
--- a/arch/m68k/mm/sun3mmu.c
+++ b/arch/m68k/mm/sun3mmu.c
@@ -53,7 +53,6 @@ void __init paging_init(void)
         wp_works_ok = 0;
 #endif
         empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-        memset(empty_zero_page, 0, PAGE_SIZE);
 
         address = PAGE_OFFSET;
         pg_dir = swapper_pg_dir;
@@ -95,7 +94,7 @@ void __init paging_init(void)
 
         /* I really wish I knew why the following change made things better...  -- Sam */
 /*      free_area_init(zones_size); */
-        free_area_init_node(0, NODE_DATA(0), zones_size,
+        free_area_init_node(0, zones_size,
                             (__pa(PAGE_OFFSET) >> PAGE_SHIFT) + 1, NULL);
 
 
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 476e18eca758..be9de2f3dc48 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -41,14 +41,12 @@ static void q40_get_model(char *model);
 static int  q40_get_hardware_list(char *buffer);
 extern void q40_sched_init(irq_handler_t handler);
 
-extern unsigned long q40_gettimeoffset(void);
-extern int q40_hwclk(int, struct rtc_time *);
-extern unsigned int q40_get_ss(void);
-extern int q40_set_clock_mmss(unsigned long);
+static unsigned long q40_gettimeoffset(void);
+static int q40_hwclk(int, struct rtc_time *);
+static unsigned int q40_get_ss(void);
+static int q40_set_clock_mmss(unsigned long);
 static int q40_get_rtc_pll(struct rtc_pll_info *pll);
 static int q40_set_rtc_pll(struct rtc_pll_info *pll);
-extern void q40_reset(void);
-void q40_halt(void);
 extern void q40_waitbut(void);
 void q40_set_vectors(void);
 
@@ -127,7 +125,7 @@ static void q40_heartbeat(int on)
 }
 #endif
 
-void q40_reset(void)
+static void q40_reset(void)
 {
         halted = 1;
         printk("\n\n*******************************************\n"
@@ -137,7 +135,8 @@ void q40_reset(void)
         while (1)
                 ;
 }
-void q40_halt(void)
+
+static void q40_halt(void)
 {
         halted = 1;
         printk("\n\n*******************\n"
@@ -165,7 +164,8 @@ static unsigned int serports[] =
 {
         0x3f8,0x2f8,0x3e8,0x2e8,0
 };
-void q40_disable_irqs(void)
+
+static void q40_disable_irqs(void)
 {
         unsigned i, j;
 
@@ -227,7 +227,7 @@ static inline unsigned char bin2bcd(unsigned char b)
 }
 
 
-unsigned long q40_gettimeoffset(void)
+static unsigned long q40_gettimeoffset(void)
 {
         return 5000 * (ql_ticks != 0);
 }
@@ -248,7 +248,7 @@ unsigned long q40_gettimeoffset(void)
  * };
  */
 
-int q40_hwclk(int op, struct rtc_time *t)
+static int q40_hwclk(int op, struct rtc_time *t)
 {
         if (op) {
                 /* Write.... */
@@ -285,7 +285,7 @@ int q40_hwclk(int op, struct rtc_time *t)
         return 0;
 }
 
-unsigned int q40_get_ss(void)
+static unsigned int q40_get_ss(void)
 {
         return bcd2bin(Q40_RTC_SECS);
 }
@@ -295,7 +295,7 @@ unsigned int q40_get_ss(void)
  * clock is out by > 30 minutes.  Logic lifted from atari code.
  */
 
-int q40_set_clock_mmss(unsigned long nowtime)
+static int q40_set_clock_mmss(unsigned long nowtime)
 {
         int retval = 0;
         short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
diff --git a/arch/m68k/sun3/Makefile b/arch/m68k/sun3/Makefile
index be1a8470d636..38ba0e0cedad 100644
--- a/arch/m68k/sun3/Makefile
+++ b/arch/m68k/sun3/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Linux arch/m68k/sun3 source directory
 #
 
-obj-y   := sun3ints.o sun3dvma.o sbus.o idprom.o
+obj-y   := sun3ints.o sun3dvma.o idprom.o
 
 obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o intersil.o
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index c0fbd278fbb1..732087d0735c 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@ extern char _text, _end;
 char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
 
 extern unsigned long sun3_gettimeoffset(void);
-extern void sun3_sched_init(irq_handler_t handler);
+static void sun3_sched_init(irq_handler_t handler);
 extern void sun3_get_model (char* model);
 extern void idprom_init (void);
 extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -114,7 +114,8 @@ static void sun3_halt (void)
 
 /* sun3 bootmem allocation */
 
-void __init sun3_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
+static void __init sun3_bootmem_alloc(unsigned long memory_start,
+                                      unsigned long memory_end)
 {
         unsigned long start_page;
 
@@ -164,7 +165,7 @@ void __init config_sun3(void)
         sun3_bootmem_alloc(memory_start, memory_end);
 }
 
-void __init sun3_sched_init(irq_handler_t timer_routine)
+static void __init sun3_sched_init(irq_handler_t timer_routine)
 {
         sun3_disable_interrupts();
         intersil_clock->cmd_reg=(INTERSIL_RUN|INTERSIL_INT_DISABLE|INTERSIL_24H_MODE);
diff --git a/arch/m68k/sun3/dvma.c b/arch/m68k/sun3/dvma.c
index d2b3093f2405..d522eaab4551 100644
--- a/arch/m68k/sun3/dvma.c
+++ b/arch/m68k/sun3/dvma.c
@@ -19,7 +19,7 @@
 
 static unsigned long ptelist[120];
 
-inline unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
+static unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
 {
         unsigned long pte;
         unsigned long j;
diff --git a/arch/m68k/sun3/idprom.c b/arch/m68k/sun3/idprom.c
index dca6ab6a4ede..c86ac37d1983 100644
--- a/arch/m68k/sun3/idprom.c
+++ b/arch/m68k/sun3/idprom.c
@@ -1,4 +1,4 @@
-/* $Id: idprom.c,v 1.22 1996/11/13 05:09:25 davem Exp $
+/*
  * idprom.c: Routines to load the idprom into kernel addresses and
  *           interpret the data contained within.
  *
@@ -25,7 +25,7 @@ static struct idprom idprom_buffer;
  * of the Sparc CPU and have a meaningful IDPROM machtype value that we
  * know about.  See asm-sparc/machines.h for empirical constants.
  */
-struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
+static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
 /* First, Sun3's */
     { .name = "Sun 3/160 Series",       .id_machtype = (SM_SUN3 | SM_3_160) },
     { .name = "Sun 3/50",               .id_machtype = (SM_SUN3 | SM_3_50) },
diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c
index fb0f6a20cc3c..60f9d4500d72 100644
--- a/arch/m68k/sun3/mmu_emu.c
+++ b/arch/m68k/sun3/mmu_emu.c
@@ -55,7 +55,7 @@ unsigned char pmeg_ctx[PMEGS_NUM];
 
 /* pointers to the mm structs for each task in each
    context. 0xffffffff is a marker for kernel context */
-struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
+static struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
     [0] = (struct mm_struct *)0xffffffff
 };
 
diff --git a/arch/m68k/sun3/prom/Makefile b/arch/m68k/sun3/prom/Makefile
index 6e48ae2a7175..da7eac06bca0 100644
--- a/arch/m68k/sun3/prom/Makefile
+++ b/arch/m68k/sun3/prom/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.5 1995/11/25 00:59:48 davem Exp $
 # Makefile for the Sun Boot PROM interface library under
 # Linux.
 #
diff --git a/arch/m68k/sun3/prom/console.c b/arch/m68k/sun3/prom/console.c
index 52c1427863de..2bcb6e4bfe54 100644
--- a/arch/m68k/sun3/prom/console.c
+++ b/arch/m68k/sun3/prom/console.c
@@ -1,4 +1,4 @@
-/* $Id: console.c,v 1.10 1996/12/18 06:46:54 tridge Exp $
+/*
  * console.c: Routines that deal with sending and receiving IO
  *            to/from the current console device using the PROM.
  *
@@ -104,8 +104,6 @@ prom_query_input_device()
                                 return PROMDEV_ITTYB;
                 }
                 return PROMDEV_I_UNK;
-        case PROM_AP1000:
-                return PROMDEV_I_UNK;
         };
 }
 #endif
@@ -166,8 +164,6 @@ prom_query_output_device()
                         };
                 }
                 break;
-        case PROM_AP1000:
-                return PROMDEV_I_UNK;
         };
         return PROMDEV_O_UNK;
 }
diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c
index 202adfcc316e..d8e6349336b4 100644
--- a/arch/m68k/sun3/prom/init.c
+++ b/arch/m68k/sun3/prom/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.9 1996/12/18 06:46:55 tridge Exp $
+/*
  * init.c:  Initialize internal variables used by the PROM
  *          library functions.
  *
@@ -31,11 +31,6 @@ extern void prom_ranges_init(void);
 
 void __init prom_init(struct linux_romvec *rp)
 {
-#ifdef CONFIG_AP1000
-        extern struct linux_romvec *ap_prom_init(void);
-        rp = ap_prom_init();
-#endif
-
         romvec = rp;
 #ifndef CONFIG_SUN3
         switch(romvec->pv_romvers) {
@@ -53,10 +48,6 @@ void __init prom_init(struct linux_romvec *rp)
                 prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
                 prom_halt();
                 break;
-        case 42: /* why not :-) */
-                prom_vers = PROM_AP1000;
-                break;
-
         default:
                 prom_printf("PROMLIB: Bad PROM version %d\n",
                             romvec->pv_romvers);
diff --git a/arch/m68k/sun3/prom/misc.c b/arch/m68k/sun3/prom/misc.c
index b88716f2c68c..3d60e1337f75 100644
--- a/arch/m68k/sun3/prom/misc.c
+++ b/arch/m68k/sun3/prom/misc.c
@@ -1,4 +1,4 @@
-/* $Id: misc.c,v 1.15 1997/05/14 20:45:00 davem Exp $
+/*
  * misc.c:  Miscellaneous prom functions that don't belong
  *          anywhere else.
  *
diff --git a/arch/m68k/sun3/prom/printf.c b/arch/m68k/sun3/prom/printf.c
index e7bfde377b5e..df85018f487a 100644
--- a/arch/m68k/sun3/prom/printf.c
+++ b/arch/m68k/sun3/prom/printf.c
@@ -1,4 +1,4 @@
-/* $Id: printf.c,v 1.5 1996/04/04 16:31:07 tridge Exp $
+/*
  * printf.c:  Internal prom library printf facility.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
@@ -37,10 +37,6 @@ prom_printf(char *fmt, ...)
 
         bptr = ppbuf;
 
-#ifdef CONFIG_AP1000
-        ap_write(1,bptr,strlen(bptr));
-#else
-
 #ifdef CONFIG_KGDB
         if (kgdb_initialized) {
                 printk("kgdb_initialized = %d\n", kgdb_initialized);
@@ -54,7 +50,6 @@ prom_printf(char *fmt, ...)
                 prom_putchar(ch);
         }
 #endif
-#endif
         va_end(args);
         return;
 }
diff --git a/arch/m68k/sun3/sbus.c b/arch/m68k/sun3/sbus.c
deleted file mode 100644
index babdbfa3cda7..000000000000
--- a/arch/m68k/sun3/sbus.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * SBus helper functions
- *
- * Sun3 don't have a sbus, but many of the used devices are also
- * used on Sparc machines with sbus. To avoid having a lot of
- * duplicate code, we provide necessary glue stuff to make using
- * of the sbus driver code possible.
- *
- * (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-int __init sbus_init(void)
-{
-        return 0;
-}
-
-void *sparc_alloc_io (u32 address, void *virtual, int len, char *name,
-                      u32 bus_type, int rdonly)
-{
-        return (void *)address;
-}
-
-subsys_initcall(sbus_init);
diff --git a/arch/m68k/sun3/sun3dvma.c b/arch/m68k/sun3/sun3dvma.c
index 8709677fa025..f9277e8b4159 100644
--- a/arch/m68k/sun3/sun3dvma.c
+++ b/arch/m68k/sun3/sun3dvma.c
@@ -29,7 +29,7 @@ static inline void dvma_unmap_iommu(unsigned long a, int b)
 extern void sun3_dvma_init(void);
 #endif
 
-unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
+static unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
 
 #define dvma_index(baddr) ((baddr - DVMA_START) >> DVMA_PAGE_SHIFT)
 
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index cf93481adb1d..7364cd67455e 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -30,7 +30,7 @@ void sun3_enable_interrupts(void)
         sun3_enable_irq(0);
 }
 
-int led_pattern[8] = {
+static int led_pattern[8] = {
        ~(0x80), ~(0x01),
        ~(0x40), ~(0x02),
        ~(0x20), ~(0x04),
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 8e8441587c22..2e7515e8db98 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -58,10 +58,18 @@ config GENERIC_TIME
         bool
         default y
 
+config GENERIC_CMOS_UPDATE
+        bool
+        default y
+
 config TIME_LOW_RES
         bool
         default y
 
+config GENERIC_CLOCKEVENTS
+        bool
+        default n
+
 config NO_IOPORT
         def_bool y
 
@@ -108,11 +116,13 @@ config M5206e
 
 config M520x
         bool "MCF520x"
+        select GENERIC_CLOCKEVENTS
         help
            Freescale Coldfire 5207/5208 processor support.
 
 config M523x
         bool "MCF523x"
+        select GENERIC_CLOCKEVENTS
         help
           Freescale Coldfire 5230/1/2/4/5 processor support
 
@@ -138,6 +148,7 @@ config M5275
 
 config M528x
         bool "MCF528x"
+        select GENERIC_CLOCKEVENTS
         help
           Motorola ColdFire 5280/5282 processor support.
 
@@ -161,6 +172,7 @@ endchoice
 config M527x
         bool
         depends on (M5271 || M5275)
+        select GENERIC_CLOCKEVENTS
         default y
 
 config COLDFIRE
@@ -674,6 +686,9 @@ endchoice
 if COLDFIRE
 source "kernel/Kconfig.preempt"
 endif
+
+source "kernel/time/Kconfig"
+
 source "mm/Kconfig"
 
 endmenu
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index e0b5f62e395c..b63bbcf874ff 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -8,6 +8,8 @@
 # (C) Copyright 2002, Greg Ungerer <gerg@snapgear.com>
 #
 
+KBUILD_DEFCONFIG := m5208evb_defconfig
+
 platform-$(CONFIG_M68328)       := 68328
 platform-$(CONFIG_M68EZ328)     := 68EZ328
 platform-$(CONFIG_M68VZ328)     := 68VZ328
@@ -90,13 +92,14 @@ export PLATFORM BOARD MODEL CPUCLASS
 cflags-$(CONFIG_M5206)          := -m5200
 cflags-$(CONFIG_M5206e)         := -m5200
 cflags-$(CONFIG_M520x)          := -m5307
-cflags-$(CONFIG_M523x)          := -m5307
+cflags-$(CONFIG_M523x)          := $(call cc-option,-mcpu=523x,-m5307)
 cflags-$(CONFIG_M5249)          := -m5200
-cflags-$(CONFIG_M527x)          := -m5307
+cflags-$(CONFIG_M5271)          := $(call cc-option,-mcpu=5271,-m5307)
 cflags-$(CONFIG_M5272)          := -m5307
-cflags-$(CONFIG_M528x)          := -m5307
+cflags-$(CONFIG_M5275)          := $(call cc-option,-mcpu=5275,-m5307)
+cflags-$(CONFIG_M528x)          := $(call cc-option,-m528x,-m5307)
 cflags-$(CONFIG_M5307)          := -m5307
-cflags-$(CONFIG_M532x)          := -m5307
+cflags-$(CONFIG_M532x)          := $(call cc-option,-mcpu=532x,-m5307)
 cflags-$(CONFIG_M5407)          := -m5200
 cflags-$(CONFIG_M68328)         := -m68000
 cflags-$(CONFIG_M68EZ328)       := -m68000
diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68knommu/configs/m5208evb_defconfig
new file mode 100644
index 000000000000..6fae33a05e2a
--- /dev/null
+++ b/arch/m68knommu/configs/m5208evb_defconfig
@@ -0,0 +1,610 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+CONFIG_M520x=y
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=166666666
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5208EVB=y
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x40000000
+CONFIG_RAMSIZE=0x2000000
+CONFIG_VECTORBASE=0x40000000
+CONFIG_KERNELBASE=0x40020000
+# CONFIG_RAMAUTOBIT is not set
+# CONFIG_RAM8BIT is not set
+CONFIG_RAM16BIT=y
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=115200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_FULLDEBUG=y
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68knommu/configs/m5249evb_defconfig
new file mode 100644
index 000000000000..cc6458333d67
--- /dev/null
+++ b/arch/m68knommu/configs/m5249evb_defconfig
@@ -0,0 +1,497 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+CONFIG_M5249=y
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=140000000
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5249C3=y
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68knommu/configs/m5275evb_defconfig
new file mode 100644
index 000000000000..0d1256f5addb
--- /dev/null
+++ b/arch/m68knommu/configs/m5275evb_defconfig
@@ -0,0 +1,627 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+CONFIG_M5275=y
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_M527x=y
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=150000000
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5275EVB=y
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+CONFIG_FEC2=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68knommu/configs/m5307c3_defconfig
new file mode 100644
index 000000000000..fe2acdfa4d76
--- /dev/null
+++ b/arch/m68knommu/configs/m5307c3_defconfig
@@ -0,0 +1,580 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+CONFIG_M5307=y
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=90000000
+CONFIG_CLOCK_DIV=2
+# CONFIG_OLDMASK is not set
+
+#
+# Platform
+#
+# CONFIG_ARN5307 is not set
+CONFIG_M5307C3=y
+# CONFIG_eLIA is not set
+# CONFIG_SECUREEDGEMP3 is not set
+# CONFIG_CLEOPATRA is not set
+# CONFIG_NETtel is not set
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_COMEMPCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_FULLDEBUG=y
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68knommu/configs/m5407c3_defconfig
new file mode 100644
index 000000000000..1118936d20e3
--- /dev/null
+++ b/arch/m68knommu/configs/m5407c3_defconfig
@@ -0,0 +1,641 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+# Wed May  7 10:25:16 2008
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+CONFIG_M5407=y
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=50000000
+CONFIG_CLOCK_DIV=1
+
+#
+# Platform
+#
+CONFIG_M5407C3=y
+# CONFIG_CLEOPATRA is not set
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_COMEMPCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 03f4fe6a2fc0..5985f1989021 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/module.h>
+#include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/errno.h>
 #include <linux/string.h>
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index 0ccfb2ad6380..d182b2f72211 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -33,14 +33,13 @@ static inline int set_rtc_mmss(unsigned long nowtime)
         return -1;
 }
 
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
 irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 {
-        /* last time the cmos clock got updated */
-        static long last_rtc_update=0;
 
         if (current->pid)
                 profile_tick(CPU_PROFILING);
@@ -49,21 +48,6 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 
         do_timer(1);
 
-        /*
-         * If we have an externally synchronized Linux clock, then update
-         * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-         * called as close as possible to 500 ms before the new second starts.
-         */
-        if (ntp_synced() &&
-            xtime.tv_sec > last_rtc_update + 660 &&
-            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-            (xtime.tv_nsec  / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-          if (set_rtc_mmss(xtime.tv_sec) == 0)
-            last_rtc_update = xtime.tv_sec;
-          else
-            last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-        }
-
         write_sequnlock(&xtime_lock);
 
 #ifndef CONFIG_SMP
@@ -71,8 +55,9 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 #endif
         return(IRQ_HANDLED);
 }
+#endif
 
-void time_init(void)
+static unsigned long read_rtc_mmss(void)
 {
         unsigned int year, mon, day, hour, min, sec;
 
@@ -83,10 +68,21 @@ void time_init(void)
 
         if ((year += 1900) < 1970)
                 year += 100;
-        xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-        xtime.tv_nsec = 0;
-        wall_to_monotonic.tv_sec = -xtime.tv_sec;
 
-        hw_timer_init();
+        return  mktime(year, mon, day, hour, min, sec);;
+}
+
+unsigned long read_persistent_clock(void)
+{
+        return read_rtc_mmss();
 }
 
+int update_persistent_clock(struct timespec now)
+{
+        return set_rtc_mmss(now.tv_sec);
+}
+
+void time_init(void)
+{
+        hw_timer_init();
+}
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index ec9aea652e79..46f8f9d0c408 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -103,12 +103,28 @@ asmlinkage void buserr_c(struct frame *fp)
         force_sig(SIGSEGV, current);
 }
 
+static void print_this_address(unsigned long addr, int i)
+{
+#ifdef CONFIG_KALLSYMS
+        printk(KERN_EMERG " [%08lx] ", addr);
+        print_symbol(KERN_CONT "%s\n", addr);
+#else
+        if (i % 5)
+                printk(KERN_CONT " [%08lx] ", addr);
+        else
+                printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+        i++;
+#endif
+}
+
 int kstack_depth_to_print = 48;
 
 static void __show_stack(struct task_struct *task, unsigned long *stack)
 {
         unsigned long *endstack, addr;
+#ifdef CONFIG_FRAME_POINTER
         unsigned long *last_stack;
+#endif
         int i;
 
         if (!stack)
@@ -126,6 +142,7 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
                 printk(" %08lx", *(stack + i));
         }
         printk("\n");
+        i = 0;
 
 #ifdef CONFIG_FRAME_POINTER
         printk(KERN_EMERG "Call Trace:\n");
@@ -134,15 +151,30 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
         while (stack <= endstack && stack > last_stack) {
 
                 addr = *(stack + 1);
-                printk(KERN_EMERG " [%08lx] ", addr);
-                print_symbol(KERN_CONT "%s\n", addr);
+                print_this_address(addr, i);
+                i++;
 
                 last_stack = stack;
                 stack = (unsigned long *)*stack;
         }
         printk("\n");
 #else
-        printk(KERN_EMERG "CONFIG_FRAME_POINTER disabled, no symbolic call trace\n");
+        printk(KERN_EMERG "Call Trace with CONFIG_FRAME_POINTER disabled:\n");
+        while (stack <= endstack) {
+                addr = *stack++;
+                /*
+                 * If the address is either in the text segment of the kernel,
+                 * or in a region which is occupied by a module then it *may*
+                 * be the address of a calling routine; if so, print it so that
+                 * someone tracing down the cause of the crash will be able to
+                 * figure out the call path that was taken.
+                 */
+                if (__kernel_text_address(addr)) {
+                        print_this_address(addr, i);
+                        i++;
+                }
+        }
+        printk(KERN_CONT "\n");
 #endif
 }
 
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 93e69236ed6f..69ba9b10767a 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -62,6 +62,7 @@ SECTIONS {
         .text : {
                 _text = .;
                 _stext = . ;
+                HEAD_TEXT
                 TEXT_TEXT
                 SCHED_TEXT
                 LOCK_TEXT
diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index 22e2a0d02b81..3bf249c53e41 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -62,33 +62,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-        total++;
-        if (PageReserved(mem_map+i))
-            reserved++;
-        else if (PageSwapCache(mem_map+i))
-            cached++;
-        else if (!page_count(mem_map+i))
-            free++;
-        else
-            shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 40cf20be1b90..4f416a91a829 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_COLDFIRE)	+= dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)     += timers.o
 obj-$(CONFIG_M5206e)    += timers.o
 obj-$(CONFIG_M520x)     += pit.o
-obj-$(CONFIG_M523x)     += pit.o
+obj-$(CONFIG_M523x)     += pit.o dma_timer.o
 obj-$(CONFIG_M5249)     += timers.o
 obj-$(CONFIG_M527x)     += pit.o
 obj-$(CONFIG_M5272)     += timers.o
diff --git a/arch/m68knommu/platform/coldfire/dma_timer.c b/arch/m68knommu/platform/coldfire/dma_timer.c
new file mode 100644
index 000000000000..772578b1084f
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/dma_timer.c
@@ -0,0 +1,84 @@
+/*
+ * dma_timer.c -- Freescale ColdFire DMA Timer.
+ *
+ * Copyright (C) 2007, Benedikt Spranger <b.spranger@linutronix.de>
+ * Copyright (C) 2008. Sebastian Siewior, Linutronix
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+#define DMA_TIMER_0     (0x00)
+#define DMA_TIMER_1     (0x40)
+#define DMA_TIMER_2     (0x80)
+#define DMA_TIMER_3     (0xc0)
+
+#define DTMR0   (MCF_IPSBAR + DMA_TIMER_0 + 0x400)
+#define DTXMR0  (MCF_IPSBAR + DMA_TIMER_0 + 0x402)
+#define DTER0   (MCF_IPSBAR + DMA_TIMER_0 + 0x403)
+#define DTRR0   (MCF_IPSBAR + DMA_TIMER_0 + 0x404)
+#define DTCR0   (MCF_IPSBAR + DMA_TIMER_0 + 0x408)
+#define DTCN0   (MCF_IPSBAR + DMA_TIMER_0 + 0x40c)
+
+#define DMA_FREQ    ((MCF_CLK / 2) / 16)
+
+/* DTMR */
+#define DMA_DTMR_RESTART        (1 << 3)
+#define DMA_DTMR_CLK_DIV_1      (1 << 1)
+#define DMA_DTMR_CLK_DIV_16     (2 << 1)
+#define DMA_DTMR_ENABLE         (1 << 0)
+
+static cycle_t cf_dt_get_cycles(void)
+{
+        return __raw_readl(DTCN0);
+}
+
+static struct clocksource clocksource_cf_dt = {
+        .name           = "coldfire_dma_timer",
+        .rating         = 200,
+        .read           = cf_dt_get_cycles,
+        .mask           = CLOCKSOURCE_MASK(32),
+        .shift          = 20,
+        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init  init_cf_dt_clocksource(void)
+{
+        /*
+         * We setup DMA timer 0 in free run mode. This incrementing counter is
+         * used as a highly precious clock source. With MCF_CLOCK = 150 MHz we
+         * get a ~213 ns resolution and the 32bit register will overflow almost
+         * every 15 minutes.
+         */
+        __raw_writeb(0x00, DTXMR0);
+        __raw_writeb(0x00, DTER0);
+        __raw_writel(0x00000000, DTRR0);
+        __raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
+        clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
+                                                     clocksource_cf_dt.shift);
+        return clocksource_register(&clocksource_cf_dt);
+}
+
+arch_initcall(init_cf_dt_clocksource);
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+#define CYC2NS_SCALE    ((1000000 << CYC2NS_SCALE_FACTOR) / (DMA_FREQ / 1000))
+
+static unsigned long long cycles2ns(unsigned long cycl)
+{
+        return (unsigned long long) ((unsigned long long)cycl *
+                        CYC2NS_SCALE) >> CYC2NS_SCALE_FACTOR;
+}
+
+unsigned long long sched_clock(void)
+{
+        unsigned long cycl = __raw_readl(DTCN0);
+
+        return cycles2ns(cycl);
+}
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
index b9aa0ca29bfb..2b0d73c0cc32 100644
--- a/arch/m68knommu/platform/coldfire/head.S
+++ b/arch/m68knommu/platform/coldfire/head.S
@@ -10,6 +10,7 @@
 
 #include <linux/sys.h>
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/asm-offsets.h>
 #include <asm/coldfire.h>
 #include <asm/mcfcache.h>
@@ -126,7 +127,7 @@ _ramend:
 
 /*****************************************************************************/
 
-.text
+__HEAD
 
 /*
  *      This is the codes first entry point. This is where it all
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index 4290638012e0..c5b916700b22 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
 #include <asm/coldfire.h>
@@ -33,22 +33,86 @@
 #define FREQ    ((MCF_CLK / 2) / 64)
 #define TA(a)   (MCF_IPSBAR + MCFPIT_BASE1 + (a))
 #define INTC0   (MCF_IPSBAR + MCFICM_INTC0)
+#define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
 
-static u32 pit_cycles_per_jiffy;
 static u32 pit_cnt;
 
+/*
+ * Initialize the PIT timer.
+ *
+ * This is also called after resume to bring the PIT into operation again.
+ */
+
+static void init_cf_pit_timer(enum clock_event_mode mode,
+                             struct clock_event_device *evt)
+{
+        switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+
+                __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+                __raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR));
+                __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+                                MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | \
+                                MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
+                break;
+
+        case CLOCK_EVT_MODE_SHUTDOWN:
+        case CLOCK_EVT_MODE_UNUSED:
+
+                __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+                break;
+
+        case CLOCK_EVT_MODE_ONESHOT:
+
+                __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+                __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+                                MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, \
+                                TA(MCFPIT_PCSR));
+                break;
+
+        case CLOCK_EVT_MODE_RESUME:
+                /* Nothing to do here */
+                break;
+        }
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int cf_pit_next_event(unsigned long delta,
+                struct clock_event_device *evt)
+{
+        __raw_writew(delta, TA(MCFPIT_PMR));
+        return 0;
+}
+
+struct clock_event_device cf_pit_clockevent = {
+        .name           = "pit",
+        .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+        .set_mode       = init_cf_pit_timer,
+        .set_next_event = cf_pit_next_event,
+        .shift          = 32,
+        .irq            = MCFINT_VECBASE + MCFINT_PIT1,
+};
+
+
+
 /***************************************************************************/
 
 static irqreturn_t pit_tick(int irq, void *dummy)
 {
+        struct clock_event_device *evt = &cf_pit_clockevent;
         u16 pcsr;
 
         /* Reset the ColdFire timer */
         pcsr = __raw_readw(TA(MCFPIT_PCSR));
         __raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR));
 
-        pit_cnt += pit_cycles_per_jiffy;
-        return arch_timer_interrupt(irq, dummy);
+        pit_cnt += PIT_CYCLES_PER_JIFFY;
+        evt->event_handler(evt);
+        return IRQ_HANDLED;
 }
 
 /***************************************************************************/
@@ -72,14 +136,14 @@ static cycle_t pit_read_clk(void)
         cycles = pit_cnt;
         local_irq_restore(flags);
 
-        return cycles + pit_cycles_per_jiffy - pcntr;
+        return cycles + PIT_CYCLES_PER_JIFFY - pcntr;
 }
 
 /***************************************************************************/
 
 static struct clocksource pit_clk = {
         .name   = "pit",
-        .rating = 250,
+        .rating = 100,
         .read   = pit_read_clk,
         .shift  = 20,
         .mask   = CLOCKSOURCE_MASK(32),
@@ -92,6 +156,14 @@ void hw_timer_init(void)
 {
         u32 imr;
 
+        cf_pit_clockevent.cpumask = cpumask_of_cpu(smp_processor_id());
+        cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
+        cf_pit_clockevent.max_delta_ns =
+                clockevent_delta2ns(0xFFFF, &cf_pit_clockevent);
+        cf_pit_clockevent.min_delta_ns =
+                clockevent_delta2ns(0x3f, &cf_pit_clockevent);
+        clockevents_register_device(&cf_pit_clockevent);
+
         setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
 
         __raw_writeb(ICR_INTRCONF, INTC0 + MCFINTC_ICR0 + MCFINT_PIT1);
@@ -99,13 +171,6 @@ void hw_timer_init(void)
         imr &= ~MCFPIT_IMR_IBIT;
         __raw_writel(imr, INTC0 + MCFPIT_IMR);
 
-        /* Set up PIT timer 1 as poll clock */
-        pit_cycles_per_jiffy = FREQ / HZ;
-        __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
-        __raw_writew(pit_cycles_per_jiffy, TA(MCFPIT_PMR));
-        __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | MCFPIT_PCSR_OVW |
-                MCFPIT_PCSR_RLD | MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
-
         pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
         clocksource_register(&pit_clk);
 }
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d21df5f1b1f3..b4c4eaa5dd26 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -330,6 +330,7 @@ config SGI_IP22
         select SGI_HAS_DS1286
         select SGI_HAS_I8042
         select SGI_HAS_INDYDOG
+        select SGI_HAS_HAL2
         select SGI_HAS_SEEQ
         select SGI_HAS_WD93
         select SGI_HAS_ZILOG
@@ -386,7 +387,6 @@ config SGI_IP28
         select SGI_HAS_I8042
         select SGI_HAS_INDYDOG
         select SGI_HAS_HAL2
-        select SGI_HAS_HAL2
         select SGI_HAS_SEEQ
         select SGI_HAS_WD93
         select SGI_HAS_ZILOG
@@ -558,6 +558,24 @@ config MACH_TX39XX
 config MACH_TX49XX
         bool "Toshiba TX49 series based machines"
 
+config MIKROTIK_RB532
+        bool "Mikrotik RB532 boards"
+        select CEVT_R4K
+        select CSRC_R4K
+        select DMA_NONCOHERENT
+        select GENERIC_HARDIRQS_NO__DO_IRQ
+        select HW_HAS_PCI
+        select IRQ_CPU
+        select SYS_HAS_CPU_MIPS32_R1
+        select SYS_SUPPORTS_32BIT_KERNEL
+        select SYS_SUPPORTS_LITTLE_ENDIAN
+        select SWAP_IO_SPACE
+        select BOOT_RAW
+        select GENERIC_GPIO
+        help
+          Support the Mikrotik(tm) RouterBoard 532 series,
+          based on the IDT RC32434 SoC.
+
 config WR_PPMC
         bool "Wind River PPMC board"
         select CEVT_R4K
@@ -695,7 +713,7 @@ config CSRC_SB1250
 
 config GPIO_TXX9
         select GENERIC_GPIO
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         bool
 
 config CFE
@@ -899,7 +917,7 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
         int
-        default "4" if MACH_DECSTATION
+        default "4" if MACH_DECSTATION || MIKROTIK_RB532
         default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
         default "4" if PMC_MSP4200_EVAL
         default "5"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 356453322b49..9aab51caf16a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -560,6 +560,13 @@ load-$(CONFIG_MACH_TX49XX)	+= 0xffffffff80100000
 core-$(CONFIG_TOSHIBA_JMR3927)  += arch/mips/txx9/jmr3927/
 
 #
+# Routerboard 532 board
+#
+core-$(CONFIG_MIKROTIK_RB532)   += arch/mips/rb532/
+cflags-$(CONFIG_MIKROTIK_RB532) += -Iinclude/asm-mips/mach-rc32434
+load-$(CONFIG_MIKROTIK_RB532)   += 0xffffffff80101000
+
+#
 # Toshiba RBTX4927 board or
 # Toshiba RBTX4937 board
 #
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index 2166b9e1e80c..bd854a6d1d89 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -31,7 +31,6 @@
 
 #include <linux/init.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/sysctl.h>
 #include <linux/jiffies.h>
 
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index dd23beb8604f..b51644227241 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -81,8 +81,8 @@ void __init plat_mem_setup(void)
 
         set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE));
 
-        /* I/O port resource must include LCD/buttons */
-        ioport_resource.end = 0x0fffffff;
+        /* I/O port resource */
+        ioport_resource.end = 0x01ffffff;
 
         /* These resources have been reserved by VIA SuperI/O chip. */
         for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++)
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
new file mode 100644
index 000000000000..f28dc32974e5
--- /dev/null
+++ b/arch/mips/configs/rb532_defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25
+# Mon Apr 28 12:24:17 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+CONFIG_MIKROTIK_RB532=y
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=y
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_VEGAS=y
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="vegas"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=y
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+# CONFIG_NET_ACT_NAT is not set
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+CONFIG_PATA_RB532=y
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_IFB=m
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_KORINA=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_TC35815 is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=y
+# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_NAPI=y
+# CONFIG_SC92031 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+CONFIG_ATMEL=m
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HID is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 65af3cc90abb..2fefb14414b7 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -11,7 +11,6 @@
 #include <linux/file.h>
 #include <linux/smp_lock.h>
 #include <linux/highuid.h>
-#include <linux/dirent.h>
 #include <linux/resource.h>
 #include <linux/highmem.h>
 #include <linux/time.h>
@@ -129,23 +128,6 @@ out:
         return error;
 }
 
-
-asmlinkage int sys_truncate64(const char __user *path, unsigned int high,
-                              unsigned int low)
-{
-        if ((int)high < 0)
-                return -EINVAL;
-        return sys_truncate(path, ((long) high << 32) | low);
-}
-
-asmlinkage int sys_ftruncate64(unsigned int fd, unsigned int high,
-                               unsigned int low)
-{
-        if ((int)high < 0)
-                return -EINVAL;
-        return sys_ftruncate(fd, ((long) high << 32) | low);
-}
-
 /*
  * sys_execve() executes a new program.
  */
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index e7ed0ac48537..1f60e27523d9 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -22,6 +22,7 @@
 
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
+#include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index c06f5b5d764c..b16facd9ea8e 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -53,7 +53,7 @@ void __noreturn cpu_idle(void)
 {
         /* endless idle loop with no priority at all */
         while (1) {
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 while (!need_resched()) {
 #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
                         extern void smtc_idle_loop_hook(void);
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index b55641961232..dfd868b68364 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -522,8 +522,8 @@ static int __init rtlx_module_init(void)
                 atomic_set(&channel_wqs[i].in_open, 0);
                 mutex_init(&channel_wqs[i].mutex);
 
-                dev = device_create(mt_class, NULL, MKDEV(major, i),
-                                    "%s%d", module_name, i);
+                dev = device_create_drvdata(mt_class, NULL, MKDEV(major, i),
+                                            NULL, "%s%d", module_name, i);
                 if (IS_ERR(dev)) {
                         err = PTR_ERR(dev);
                         goto out_chrdev;
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index c058c0b61a2a..fc4fd4d705e2 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -354,7 +354,7 @@ einval:	li	v0, -EINVAL
         sys     sys_mkdir               2
         sys     sys_rmdir               1       /* 4040 */
         sys     sys_dup                 1
-        sys     sys_pipe                0
+        sys     sysm_pipe               0
         sys     sys_times               1
         sys     sys_ni_syscall          0
         sys     sys_brk                 1       /* 4045 */
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index dc597b600c68..2b73fd1e4528 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -219,7 +219,7 @@ sys_call_table:
         PTR     sys_readv
         PTR     sys_writev
         PTR     sys_access                      /* 5020 */
-        PTR     sys_pipe
+        PTR     sysm_pipe
         PTR     sys_select
         PTR     sys_sched_yield
         PTR     sys_mremap
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 12940eca7893..2654e75d2fef 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -141,7 +141,7 @@ EXPORT(sysn32_call_table)
         PTR     compat_sys_readv
         PTR     compat_sys_writev
         PTR     sys_access                      /* 6020 */
-        PTR     sys_pipe
+        PTR     sysm_pipe
         PTR     compat_sys_select
         PTR     sys_sched_yield
         PTR     sys_mremap
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 9a275efb4f04..76167bea5a70 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -247,7 +247,7 @@ sys_call_table:
         PTR     sys_mkdir
         PTR     sys_rmdir                       /* 4040 */
         PTR     sys_dup
-        PTR     sys_pipe
+        PTR     sysm_pipe
         PTR     compat_sys_times
         PTR     sys_ni_syscall
         PTR     sys_brk                         /* 4045 */
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index 5eb4681a73d2..0632e2a849c0 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -7,6 +7,7 @@
  */
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
+#include <linux/module.h>
 #include <asm/stacktrace.h>
 
 /*
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index af1bdc897488..343015a2f418 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -40,12 +40,19 @@
 #include <asm/sysmips.h>
 #include <asm/uaccess.h>
 
-asmlinkage int sys_pipe(nabi_no_regargs volatile struct pt_regs regs)
+/*
+ * For historic reasons the pipe(2) syscall on MIPS has an unusual calling
+ * convention.  It returns results in registers $v0 / $v1 which means there
+ * is no need for it to do verify the validity of a userspace pointer
+ * argument.  Historically that used to be expensive in Linux.  These days
+ * the performance advantage is negligible.
+ */
+asmlinkage int sysm_pipe(nabi_no_regargs volatile struct pt_regs regs)
 {
         int fd[2];
         int error, res;
 
-        error = do_pipe(fd);
+        error = do_pipe_flags(fd, 0);
         if (error) {
                 res = error;
                 goto out;
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index ed49ef01ac53..52e6c58c8de1 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -24,6 +24,7 @@
 #include <asm/signal.h>
 #include <asm/uaccess.h>
 
+#include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
 
 #define SIGNALLING_NAN 0x7ff800007ff80000LL
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 48731020ca0e..44e8dd8106bf 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,8 +3,7 @@
 #
 
 obj-y                           += cache.o dma-default.o extable.o fault.o \
-                                   init.o pgtable.o tlbex.o tlbex-fault.o \
-                                   uasm.o page.o
+                                   init.o tlbex.o tlbex-fault.o uasm.o page.o
 
 obj-$(CONFIG_32BIT)             += ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)             += pgtable-64.o
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index ae39dd88b9aa..891312f8e5a6 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -348,7 +348,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
 
 EXPORT_SYMBOL(dma_sync_sg_for_device);
 
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
         return 0;
 }
diff --git a/arch/mips/mm/pgtable.c b/arch/mips/mm/pgtable.c
deleted file mode 100644
index 7dfa579ab24c..000000000000
--- a/arch/mips/mm/pgtable.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-
-void show_mem(void)
-{
-#ifndef CONFIG_NEED_MULTIPLE_NODES  /* XXX(hch): later.. */
-        int pfn, total = 0, reserved = 0;
-        int shared = 0, cached = 0;
-        int highmem = 0;
-        struct page *page;
-
-        printk("Mem-info:\n");
-        show_free_areas();
-        pfn = max_mapnr;
-        while (pfn-- > 0) {
-                if (!pfn_valid(pfn))
-                        continue;
-                page = pfn_to_page(pfn);
-                total++;
-                if (PageHighMem(page))
-                        highmem++;
-                if (PageReserved(page))
-                        reserved++;
-                else if (PageSwapCache(page))
-                        cached++;
-                else if (page_count(page))
-                        shared += page_count(page) - 1;
-        }
-        printk("%d pages of RAM\n", total);
-        printk("%d pages of HIGHMEM\n", highmem);
-        printk("%d reserved pages\n", reserved);
-        printk("%d pages shared\n", shared);
-        printk("%d pages swap cached\n", cached);
-#endif
-}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 57e34cafa497..15e01aec37fd 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -49,3 +49,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-rbtx4938.o
 obj-$(CONFIG_VICTOR_MPC30X)     += fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)      += fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)           += fixup-wrppmc.o
+obj-$(CONFIG_MIKROTIK_RB532)    += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
diff --git a/arch/mips/pci/fixup-rc32434.c b/arch/mips/pci/fixup-rc32434.c
new file mode 100644
index 000000000000..75b90dcb7a09
--- /dev/null
+++ b/arch/mips/pci/fixup-rc32434.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *              stevel@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+
+static int __devinitdata irq_map[2][12] = {
+        {0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},
+        {0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3}
+};
+
+int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+        int irq = 0;
+
+        if (dev->bus->number < 2 && PCI_SLOT(dev->devfn) < 12)
+                irq = irq_map[dev->bus->number][PCI_SLOT(dev->devfn)];
+
+        return irq + GROUP4_IRQ_BASE + 4;
+}
+
+static void rc32434_pci_early_fixup(struct pci_dev *dev)
+{
+        if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) {
+                /* disable prefetched memory range */
+                pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
+                pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
+
+                pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
+        }
+}
+
+/*
+ * The fixup applies to both the IDT and VIA devices present on the board
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, rc32434_pci_early_fixup);
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+        return 0;
+}
diff --git a/arch/mips/pci/ops-rc32434.c b/arch/mips/pci/ops-rc32434.c
new file mode 100644
index 000000000000..d1f8fa210ca1
--- /dev/null
+++ b/arch/mips/pci/ops-rc32434.c
@@ -0,0 +1,207 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     pci_ops for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *  Copyright 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include <asm/cpu.h>
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+
+#define PCI_CFG_SET(bus, slot, func, off) \
+        (rc32434_pci->pcicfga = (0x80000000 | \
+                                ((bus) << 16) | ((slot)<<11) | \
+                                ((func)<<8) | (off)))
+
+static inline int config_access(unsigned char access_type,
+                                struct pci_bus *bus, unsigned int devfn,
+                                unsigned char where, u32 *data)
+{
+        unsigned int slot = PCI_SLOT(devfn);
+        u8 func = PCI_FUNC(devfn);
+
+        /* Setup address */
+        PCI_CFG_SET(bus->number, slot, func, where);
+        rc32434_sync();
+
+        if (access_type == PCI_ACCESS_WRITE)
+                rc32434_pci->pcicfgd = *data;
+        else
+                *data = rc32434_pci->pcicfgd;
+
+        rc32434_sync();
+
+        return 0;
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
+                            int where, u8 *val)
+{
+        u32 data;
+        int ret;
+
+        ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+        *val = (data >> ((where & 3) << 3)) & 0xff;
+        return ret;
+}
+
+static int read_config_word(struct pci_bus *bus, unsigned int devfn,
+                            int where, u16 *val)
+{
+        u32 data;
+        int ret;
+
+        ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+        *val = (data >> ((where & 3) << 3)) & 0xffff;
+        return ret;
+}
+
+static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
+                             int where, u32 *val)
+{
+        int ret;
+        int delay = 1;
+
+        /*
+         * Don't scan too far, else there will be errors with plugged in
+         * daughterboard (rb564).
+         */
+        if (bus->number == 0 && PCI_SLOT(devfn) > 21)
+                return 0;
+
+retry:
+        ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
+
+        /*
+         * Certain devices react delayed at device scan time, this
+         * gives them time to settle
+         */
+        if (where == PCI_VENDOR_ID) {
+                if (ret == 0xffffffff || ret == 0x00000000 ||
+                    ret == 0x0000ffff || ret == 0xffff0000) {
+                        if (delay > 4)
+                                return 0;
+                        delay *= 2;
+                        msleep(delay);
+                        goto retry;
+                }
+        }
+
+        return ret;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
+                  u8 val)
+{
+        u32 data = 0;
+
+        if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+                return -1;
+
+        data = (data & ~(0xff << ((where & 3) << 3))) |
+            (val << ((where & 3) << 3));
+
+        if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+                return -1;
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
+                  u16 val)
+{
+        u32 data = 0;
+
+        if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+                return -1;
+
+        data = (data & ~(0xffff << ((where & 3) << 3))) |
+            (val << ((where & 3) << 3));
+
+        if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+                return -1;
+
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
+                   u32 val)
+{
+        if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
+                return -1;
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn,
+                           int where, int size, u32 *val)
+{
+        switch (size) {
+        case 1:
+                return read_config_byte(bus, devfn, where, (u8 *) val);
+        case 2:
+                return read_config_word(bus, devfn, where, (u16 *) val);
+        default:
+                return read_config_dword(bus, devfn, where, val);
+        }
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn,
+                            int where, int size, u32 val)
+{
+        switch (size) {
+        case 1:
+                return write_config_byte(bus, devfn, where, (u8) val);
+        case 2:
+                return write_config_word(bus, devfn, where, (u16) val);
+        default:
+                return write_config_dword(bus, devfn, where, val);
+        }
+}
+
+struct pci_ops rc32434_pci_ops = {
+        .read = pci_config_read,
+        .write = pci_config_write,
+};
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
new file mode 100644
index 000000000000..1c2821e2f494
--- /dev/null
+++ b/arch/mips/pci/pci-rc32434.c
@@ -0,0 +1,221 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     PCI initialization for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+/* define an unsigned array for the PCI registers */
+static unsigned int korina_cnfg_regs[25] = {
+        KORINA_CNFG1, KORINA_CNFG2, KORINA_CNFG3, KORINA_CNFG4,
+        KORINA_CNFG5, KORINA_CNFG6, KORINA_CNFG7, KORINA_CNFG8,
+        KORINA_CNFG9, KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12,
+        KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16,
+        KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20,
+        KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24
+};
+static struct resource rc32434_res_pci_mem1;
+static struct resource rc32434_res_pci_mem2;
+
+static struct resource rc32434_res_pci_mem1 = {
+        .name = "PCI MEM1",
+        .start = 0x50000000,
+        .end = 0x5FFFFFFF,
+        .flags = IORESOURCE_MEM,
+        .parent = &rc32434_res_pci_mem1,
+        .sibling = NULL,
+        .child = &rc32434_res_pci_mem2
+};
+
+static struct resource rc32434_res_pci_mem2 = {
+        .name = "PCI Mem2",
+        .start = 0x60000000,
+        .end = 0x6FFFFFFF,
+        .flags = IORESOURCE_MEM,
+        .parent = &rc32434_res_pci_mem1,
+        .sibling = NULL,
+        .child = NULL
+};
+
+static struct resource rc32434_res_pci_io1 = {
+        .name = "PCI I/O1",
+        .start = 0x18800000,
+        .end = 0x188FFFFF,
+        .flags = IORESOURCE_IO,
+};
+
+extern struct pci_ops rc32434_pci_ops;
+
+#define PCI_MEM1_START  PCI_ADDR_START
+#define PCI_MEM1_END    (PCI_ADDR_START + CPUTOPCI_MEM_WIN - 1)
+#define PCI_MEM2_START  (PCI_ADDR_START + CPUTOPCI_MEM_WIN)
+#define PCI_MEM2_END    (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN)  - 1)
+#define PCI_IO1_START   (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN))
+#define PCI_IO1_END                                                     \
+        (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN - 1)
+#define PCI_IO2_START                                                   \
+        (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN)
+#define PCI_IO2_END                                                     \
+        (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) - 1)
+
+struct pci_controller rc32434_controller2;
+
+struct pci_controller rc32434_controller = {
+        .pci_ops = &rc32434_pci_ops,
+        .mem_resource = &rc32434_res_pci_mem1,
+        .io_resource = &rc32434_res_pci_io1,
+        .mem_offset = 0,
+        .io_offset = 0,
+
+};
+
+#ifdef __MIPSEB__
+#define PCI_ENDIAN_FLAG PCILBAC_sb_m
+#else
+#define PCI_ENDIAN_FLAG 0
+#endif
+
+static int __init rc32434_pcibridge_init(void)
+{
+        unsigned int pcicvalue, pcicdata = 0;
+        unsigned int dummyread, pcicntlval;
+        int loopCount;
+        unsigned int pci_config_addr;
+
+        pcicvalue = rc32434_pci->pcic;
+        pcicvalue = (pcicvalue >> PCIM_SHFT) & PCIM_BIT_LEN;
+        if (!((pcicvalue == PCIM_H_EA) ||
+              (pcicvalue == PCIM_H_IA_FIX) ||
+              (pcicvalue == PCIM_H_IA_RR))) {
+                pr_err(KERN_ERR "PCI init error!!!\n");
+                /* Not in Host Mode, return ERROR */
+                return -1;
+        }
+        /* Enables the Idle Grant mode, Arbiter Parking */
+        pcicdata |= (PCI_CTL_IGM | PCI_CTL_EAP | PCI_CTL_EN);
+        rc32434_pci->pcic = pcicdata;   /* Enable the PCI bus Interface */
+        /* Zero out the PCI status & PCI Status Mask */
+        for (;;) {
+                pcicdata = rc32434_pci->pcis;
+                if (!(pcicdata & PCI_STAT_RIP))
+                        break;
+        }
+
+        rc32434_pci->pcis = 0;
+        rc32434_pci->pcism = 0xFFFFFFFF;
+        /* Zero out the PCI decoupled registers */
+        rc32434_pci->pcidac = 0;        /*
+                                         * disable PCI decoupled accesses at
+                                         * initialization
+                                         */
+        rc32434_pci->pcidas = 0;        /* clear the status */
+        rc32434_pci->pcidasm = 0x0000007F;      /* Mask all the interrupts */
+        /* Mask PCI Messaging Interrupts */
+        rc32434_pci_msg->pciiic = 0;
+        rc32434_pci_msg->pciiim = 0xFFFFFFFF;
+        rc32434_pci_msg->pciioic = 0;
+        rc32434_pci_msg->pciioim = 0;
+
+
+        /* Setup PCILB0 as Memory Window */
+        rc32434_pci->pcilba[0].address = (unsigned int) (PCI_ADDR_START);
+
+        /* setup the PCI map address as same as the local address */
+
+        rc32434_pci->pcilba[0].mapping = (unsigned int) (PCI_ADDR_START);
+
+
+        /* Setup PCILBA1 as MEM */
+        rc32434_pci->pcilba[0].control =
+            (((SIZE_256MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+        dummyread = rc32434_pci->pcilba[0].control;     /* flush the CPU write Buffers */
+        rc32434_pci->pcilba[1].address = 0x60000000;
+        rc32434_pci->pcilba[1].mapping = 0x60000000;
+
+        /* setup PCILBA2 as IO Window */
+        rc32434_pci->pcilba[1].control =
+            (((SIZE_256MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+        dummyread = rc32434_pci->pcilba[1].control;     /* flush the CPU write Buffers */
+        rc32434_pci->pcilba[2].address = 0x18C00000;
+        rc32434_pci->pcilba[2].mapping = 0x18FFFFFF;
+
+        /* setup PCILBA2 as IO Window */
+        rc32434_pci->pcilba[2].control =
+            (((SIZE_4MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+        dummyread = rc32434_pci->pcilba[2].control;     /* flush the CPU write Buffers */
+
+        /* Setup PCILBA3 as IO Window */
+        rc32434_pci->pcilba[3].address = 0x18800000;
+        rc32434_pci->pcilba[3].mapping = 0x18800000;
+        rc32434_pci->pcilba[3].control =
+            ((((SIZE_1MB & 0x1ff) << PCI_LBAC_SIZE_BIT) | PCI_LBAC_MSI) |
+             PCI_ENDIAN_FLAG);
+        dummyread = rc32434_pci->pcilba[3].control;     /* flush the CPU write Buffers */
+
+        pci_config_addr = (unsigned int) (0x80000004);
+        for (loopCount = 0; loopCount < 24; loopCount++) {
+                rc32434_pci->pcicfga = pci_config_addr;
+                dummyread = rc32434_pci->pcicfga;
+                rc32434_pci->pcicfgd = korina_cnfg_regs[loopCount];
+                dummyread = rc32434_pci->pcicfgd;
+                pci_config_addr += 4;
+        }
+        rc32434_pci->pcitc =
+            (unsigned int) ((PCITC_RTIMER_VAL & 0xff) << PCI_TC_RTIMER_BIT) |
+            ((PCITC_DTIMER_VAL & 0xff) << PCI_TC_DTIMER_BIT);
+
+        pcicntlval = rc32434_pci->pcic;
+        pcicntlval &= ~PCI_CTL_TNR;
+        rc32434_pci->pcic = pcicntlval;
+        pcicntlval = rc32434_pci->pcic;
+
+        return 0;
+}
+
+static int __init rc32434_pci_init(void)
+{
+        pr_info("PCI: Initializing PCI\n");
+
+        ioport_resource.start = rc32434_res_pci_io1.start;
+        ioport_resource.end = rc32434_res_pci_io1.end;
+
+        rc32434_pcibridge_init();
+
+        register_pci_controller(&rc32434_controller);
+        rc32434_sync();
+
+        return 0;
+}
+
+arch_initcall(rc32434_pci_init);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index d7d6cb063d26..77bd5b68dc43 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -204,7 +204,7 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/mips/rb532/Makefile b/arch/mips/rb532/Makefile
new file mode 100644
index 000000000000..8f0b6b6a1625
--- /dev/null
+++ b/arch/mips/rb532/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the RB532 board specific parts of the kernel
+#
+
+obj-y    += irq.o time.o setup.o serial.o prom.o gpio.o devices.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
new file mode 100644
index 000000000000..44fb0a62877f
--- /dev/null
+++ b/arch/mips/rb532/devices.c
@@ -0,0 +1,331 @@
+/*
+ *  RouterBoard 500 Platform devices
+ *
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/dma.h>
+#include <asm/mach-rc32434/dma_v.h>
+#include <asm/mach-rc32434/eth.h>
+#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/integ.h>
+#include <asm/mach-rc32434/gpio.h>
+
+#define ETH0_DMA_RX_IRQ         (GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ         (GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ         (GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ         (GROUP3_IRQ_BASE + 10)
+
+#define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+#define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+
+/* NAND definitions */
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+extern char *board_type;
+
+static struct resource korina_dev0_res[] = {
+        {
+                .name = "korina_regs",
+                .start = ETH0_BASE_ADDR,
+                .end = ETH0_BASE_ADDR + sizeof(struct eth_regs),
+                .flags = IORESOURCE_MEM,
+         }, {
+                .name = "korina_rx",
+                .start = ETH0_DMA_RX_IRQ,
+                .end = ETH0_DMA_RX_IRQ,
+                .flags = IORESOURCE_IRQ
+        }, {
+                .name = "korina_tx",
+                .start = ETH0_DMA_TX_IRQ,
+                .end = ETH0_DMA_TX_IRQ,
+                .flags = IORESOURCE_IRQ
+        }, {
+                .name = "korina_ovr",
+                .start = ETH0_RX_OVR_IRQ,
+                .end = ETH0_RX_OVR_IRQ,
+                .flags = IORESOURCE_IRQ
+        }, {
+                .name = "korina_und",
+                .start = ETH0_TX_UND_IRQ,
+                .end = ETH0_TX_UND_IRQ,
+                .flags = IORESOURCE_IRQ
+        }, {
+                .name = "korina_dma_rx",
+                .start = ETH0_RX_DMA_ADDR,
+                .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+                .flags = IORESOURCE_MEM,
+         }, {
+                .name = "korina_dma_tx",
+                .start = ETH0_TX_DMA_ADDR,
+                .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+                .flags = IORESOURCE_MEM,
+         }
+};
+
+static struct korina_device korina_dev0_data = {
+        .name = "korina0",
+        .mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
+};
+
+static struct platform_device korina_dev0 = {
+        .id = 0,
+        .name = "korina",
+        .dev.platform_data = &korina_dev0_data,
+        .resource = korina_dev0_res,
+        .num_resources = ARRAY_SIZE(korina_dev0_res),
+};
+
+#define CF_GPIO_NUM 13
+
+static struct resource cf_slot0_res[] = {
+        {
+                .name = "cf_membase",
+                .flags = IORESOURCE_MEM
+        }, {
+                .name = "cf_irq",
+                .start = (8 + 4 * 32 + CF_GPIO_NUM),    /* 149 */
+                .end = (8 + 4 * 32 + CF_GPIO_NUM),
+                .flags = IORESOURCE_IRQ
+        }
+};
+
+static struct cf_device cf_slot0_data = {
+        .gpio_pin = 13
+};
+
+static struct platform_device cf_slot0 = {
+        .id = 0,
+        .name = "pata-rb532-cf",
+        .dev.platform_data = &cf_slot0_data,
+        .resource = cf_slot0_res,
+        .num_resources = ARRAY_SIZE(cf_slot0_res),
+};
+
+/* Resources and device for NAND */
+static int rb532_dev_ready(struct mtd_info *mtd)
+{
+        return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+
+static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+        struct nand_chip *chip = mtd->priv;
+        unsigned char orbits, nandbits;
+
+        if (ctrl & NAND_CTRL_CHANGE) {
+                orbits = (ctrl & NAND_CLE) << 1;
+                orbits |= (ctrl & NAND_ALE) >> 1;
+
+                nandbits = (~ctrl & NAND_CLE) << 1;
+                nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+                set_latch_u5(orbits, nandbits);
+        }
+        if (cmd != NAND_CMD_NONE)
+                writeb(cmd, chip->IO_ADDR_W);
+}
+
+static struct resource nand_slot0_res[] = {
+        [0] = {
+                .name = "nand_membase",
+                .flags = IORESOURCE_MEM
+        }
+};
+
+static struct platform_nand_data rb532_nand_data = {
+        .ctrl.dev_ready = rb532_dev_ready,
+        .ctrl.cmd_ctrl  = rb532_cmd_ctrl,
+};
+
+static struct platform_device nand_slot0 = {
+        .name = "gen_nand",
+        .id = -1,
+        .resource = nand_slot0_res,
+        .num_resources = ARRAY_SIZE(nand_slot0_res),
+        .dev.platform_data = &rb532_nand_data,
+};
+
+static struct mtd_partition rb532_partition_info[] = {
+        {
+                .name = "Routerboard NAND boot",
+                .offset = 0,
+                .size = 4 * 1024 * 1024,
+        }, {
+                .name = "rootfs",
+                .offset = MTDPART_OFS_NXTBLK,
+                .size = MTDPART_SIZ_FULL,
+        }
+};
+
+static struct platform_device rb532_led = {
+        .name = "rb532-led",
+        .id = 0,
+};
+
+static struct gpio_keys_button rb532_gpio_btn[] = {
+        {
+                .gpio = 1,
+                .code = BTN_0,
+                .desc = "S1",
+                .active_low = 1,
+        }
+};
+
+static struct gpio_keys_platform_data rb532_gpio_btn_data = {
+        .buttons = rb532_gpio_btn,
+        .nbuttons = ARRAY_SIZE(rb532_gpio_btn),
+};
+
+static struct platform_device rb532_button = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data = &rb532_gpio_btn_data,
+        }
+};
+
+static struct resource rb532_wdt_res[] = {
+        {
+                .name = "rb532_wdt_res",
+                .start = INTEG0_BASE_ADDR,
+                .end = INTEG0_BASE_ADDR + sizeof(struct integ),
+                .flags = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device rb532_wdt = {
+        .name           = "rc32434_wdt",
+        .id             = -1,
+        .resource       = rb532_wdt_res,
+        .num_resources  = ARRAY_SIZE(rb532_wdt_res),
+};
+
+static struct platform_device *rb532_devs[] = {
+        &korina_dev0,
+        &nand_slot0,
+        &cf_slot0,
+        &rb532_led,
+        &rb532_button,
+        &rb532_wdt
+};
+
+static void __init parse_mac_addr(char *macstr)
+{
+        int i, j;
+        unsigned char result, value;
+
+        for (i = 0; i < 6; i++) {
+                result = 0;
+
+                if (i != 5 && *(macstr + 2) != ':')
+                        return;
+
+                for (j = 0; j < 2; j++) {
+                        if (isxdigit(*macstr)
+                            && (value =
+                                isdigit(*macstr) ? *macstr -
+                                '0' : toupper(*macstr) - 'A' + 10) < 16) {
+                                result = result * 16 + value;
+                                macstr++;
+                        } else
+                                return;
+                }
+
+                macstr++;
+                korina_dev0_data.mac[i] = result;
+        }
+}
+
+
+/* DEVICE CONTROLLER 1 */
+#define CFG_DC_DEV1     ((void *)0xb8010010)
+#define CFG_DC_DEV2     ((void *)0xb8010020)
+#define CFG_DC_DEVBASE    0x0
+#define CFG_DC_DEVMASK    0x4
+#define CFG_DC_DEVC       0x8
+#define CFG_DC_DEVTC      0xC
+
+/* NAND definitions */
+#define NAND_CHIP_DELAY 25
+
+static void __init rb532_nand_setup(void)
+{
+        switch (mips_machtype) {
+        case MACH_MIKROTIK_RB532A:
+                set_latch_u5(LO_FOFF | LO_CEX,
+                                LO_ULED | LO_ALE | LO_CLE | LO_WPX);
+                break;
+        default:
+                set_latch_u5(LO_WPX | LO_FOFF | LO_CEX,
+                                LO_ULED | LO_ALE | LO_CLE);
+                break;
+        }
+
+        /* Setup NAND specific settings */
+        rb532_nand_data.chip.nr_chips = 1;
+        rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
+        rb532_nand_data.chip.partitions = rb532_partition_info;
+        rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+        rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
+}
+
+
+static int __init plat_setup_devices(void)
+{
+        /* Look for the CF card reader */
+        if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
+                rb532_devs[1] = NULL;
+        else {
+                cf_slot0_res[0].start =
+                    readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
+                cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
+        }
+
+        /* Read the NAND resources from the device controller */
+        nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
+        nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
+
+        /* Initialise the NAND device */
+        rb532_nand_setup();
+
+        return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
+}
+
+static int __init setup_kmac(char *s)
+{
+        printk(KERN_INFO "korina mac = %s\n", s);
+        parse_mac_addr(s);
+        return 0;
+}
+
+__setup("kmac=", setup_kmac);
+
+arch_initcall(plat_setup_devices);
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
new file mode 100644
index 000000000000..b2fe82dba0a5
--- /dev/null
+++ b/arch/mips/rb532/gpio.c
@@ -0,0 +1,220 @@
+/*
+ *  Miscellaneous functions for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *  Copyright 2006 Phil Sutter <n0-1@freewrt.org>
+ *  Copyright 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-rc32434/rb.h>
+
+struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
+EXPORT_SYMBOL(rb532_gpio_reg0);
+
+struct mpmc_device dev3;
+
+static struct resource rb532_gpio_reg0_res[] = {
+        {
+                .name   = "gpio_reg0",
+                .start  = (u32)(IDT434_REG_BASE + GPIOBASE),
+                .end    = (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct resource rb532_dev3_ctl_res[] = {
+        {
+                .name   = "dev3_ctl",
+                .start  = (u32)(IDT434_REG_BASE + DEV3BASE),
+                .end    = (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
+{
+        unsigned flags, data;
+        unsigned i = 0;
+
+        spin_lock_irqsave(&dev3.lock, flags);
+
+        data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
+        for (i = 0; i != len; ++i) {
+                if (val & (1 << i))
+                        data |= (1 << (i + bit));
+                else
+                        data &= ~(1 << (i + bit));
+        }
+        writel(data, (IDT434_REG_BASE + reg_offs));
+
+        spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_434_reg);
+
+unsigned get_434_reg(unsigned reg_offs)
+{
+        return readl(IDT434_REG_BASE + reg_offs);
+}
+EXPORT_SYMBOL(get_434_reg);
+
+void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+{
+        unsigned flags;
+
+        spin_lock_irqsave(&dev3.lock, flags);
+
+        dev3.state = (dev3.state | or_mask) & ~nand_mask;
+        writel(dev3.state, &dev3.base);
+
+        spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_latch_u5);
+
+unsigned char get_latch_u5(void)
+{
+        return dev3.state;
+}
+EXPORT_SYMBOL(get_latch_u5);
+
+int rb532_gpio_get_value(unsigned gpio)
+{
+        return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_value);
+
+void rb532_gpio_set_value(unsigned gpio, int value)
+{
+        unsigned tmp;
+
+        tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
+        if (value)
+                tmp |= 1 << gpio;
+
+        writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
+}
+EXPORT_SYMBOL(rb532_gpio_set_value);
+
+int rb532_gpio_direction_input(unsigned gpio)
+{
+        writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
+               (void *)&rb532_gpio_reg0->gpiocfg);
+
+        return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_input);
+
+int rb532_gpio_direction_output(unsigned gpio, int value)
+{
+        gpio_set_value(gpio, value);
+        writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
+               (void *)&rb532_gpio_reg0->gpiocfg);
+
+        return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_output);
+
+void rb532_gpio_set_int_level(unsigned gpio, int value)
+{
+        unsigned tmp;
+
+        tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
+        if (value)
+                tmp |= 1 << gpio;
+        writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_level);
+
+int rb532_gpio_get_int_level(unsigned gpio)
+{
+        return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_level);
+
+void rb532_gpio_set_int_status(unsigned gpio, int value)
+{
+        unsigned tmp;
+
+        tmp = readl(&rb532_gpio_reg0->gpioistat);
+        if (value)
+                tmp |= 1 << gpio;
+        writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_status);
+
+int rb532_gpio_get_int_status(unsigned gpio)
+{
+        return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_status);
+
+void rb532_gpio_set_func(unsigned gpio, int value)
+{
+        unsigned tmp;
+
+        tmp = readl(&rb532_gpio_reg0->gpiofunc);
+        if (value)
+                tmp |= 1 << gpio;
+        writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
+}
+EXPORT_SYMBOL(rb532_gpio_set_func);
+
+int rb532_gpio_get_func(unsigned gpio)
+{
+        return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_func);
+
+int __init rb532_gpio_init(void)
+{
+        rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
+                                rb532_gpio_reg0_res[0].end -
+                                rb532_gpio_reg0_res[0].start);
+
+        if (!rb532_gpio_reg0) {
+                printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
+                return -ENXIO;
+        }
+
+        dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
+                                rb532_dev3_ctl_res[0].end -
+                                rb532_dev3_ctl_res[0].start);
+
+        if (!dev3.base) {
+                printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+                return -ENXIO;
+        }
+
+        return 0;
+}
+arch_initcall(rb532_gpio_init);
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
new file mode 100644
index 000000000000..c0d0f950caf2
--- /dev/null
+++ b/arch/mips/rb532/irq.c
@@ -0,0 +1,209 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *              stevel@mvista.com or source@mvista.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+
+struct intr_group {
+        u32 mask;       /* mask of valid bits in pending/mask registers */
+        volatile u32 *base_addr;
+};
+
+#define RC32434_NR_IRQS  (GROUP4_IRQ_BASE + 32)
+
+#if (NR_IRQS < RC32434_NR_IRQS)
+#error Too little irqs defined. Did you override <asm/irq.h> ?
+#endif
+
+static const struct intr_group intr_group[NUM_INTR_GROUPS] = {
+        {
+                .mask   = 0x0000efff,
+                .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)},
+        {
+                .mask   = 0x00001fff,
+                .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)},
+        {
+                .mask   = 0x00000007,
+                .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)},
+        {
+                .mask   = 0x0003ffff,
+                .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)},
+        {
+                .mask   = 0xffffffff,
+                .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
+};
+
+#define READ_PEND(base) (*(base))
+#define READ_MASK(base) (*(base + 2))
+#define WRITE_MASK(base, val) (*(base + 2) = (val))
+
+static inline int irq_to_group(unsigned int irq_nr)
+{
+        return (irq_nr - GROUP0_IRQ_BASE) >> 5;
+}
+
+static inline int group_to_ip(unsigned int group)
+{
+        return group + 2;
+}
+
+static inline void enable_local_irq(unsigned int ip)
+{
+        int ipnum = 0x100 << ip;
+
+        set_c0_status(ipnum);
+}
+
+static inline void disable_local_irq(unsigned int ip)
+{
+        int ipnum = 0x100 << ip;
+
+        clear_c0_status(ipnum);
+}
+
+static inline void ack_local_irq(unsigned int ip)
+{
+        int ipnum = 0x100 << ip;
+
+        clear_c0_cause(ipnum);
+}
+
+static void rb532_enable_irq(unsigned int irq_nr)
+{
+        int ip = irq_nr - GROUP0_IRQ_BASE;
+        unsigned int group, intr_bit;
+        volatile unsigned int *addr;
+
+        if (ip < 0)
+                enable_local_irq(irq_nr);
+        else {
+                group = ip >> 5;
+
+                ip &= (1 << 5) - 1;
+                intr_bit = 1 << ip;
+
+                enable_local_irq(group_to_ip(group));
+
+                addr = intr_group[group].base_addr;
+                WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
+        }
+}
+
+static void rb532_disable_irq(unsigned int irq_nr)
+{
+        int ip = irq_nr - GROUP0_IRQ_BASE;
+        unsigned int group, intr_bit, mask;
+        volatile unsigned int *addr;
+
+        if (ip < 0) {
+                disable_local_irq(irq_nr);
+        } else {
+                group = ip >> 5;
+
+                ip &= (1 << 5) - 1;
+                intr_bit = 1 << ip;
+                addr = intr_group[group].base_addr;
+                mask = READ_MASK(addr);
+                mask |= intr_bit;
+                WRITE_MASK(addr, mask);
+
+                /*
+                 * if there are no more interrupts enabled in this
+                 * group, disable corresponding IP
+                 */
+                if (mask == intr_group[group].mask)
+                        disable_local_irq(group_to_ip(group));
+        }
+}
+
+static void rb532_mask_and_ack_irq(unsigned int irq_nr)
+{
+        rb532_disable_irq(irq_nr);
+        ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
+}
+
+static struct irq_chip rc32434_irq_type = {
+        .name           = "RB532",
+        .ack            = rb532_disable_irq,
+        .mask           = rb532_disable_irq,
+        .mask_ack       = rb532_mask_and_ack_irq,
+        .unmask         = rb532_enable_irq,
+};
+
+void __init arch_init_irq(void)
+{
+        int i;
+
+        pr_info("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
+
+        for (i = 0; i < RC32434_NR_IRQS; i++)
+                set_irq_chip_and_handler(i,  &rc32434_irq_type,
+                                        handle_level_irq);
+}
+
+/* Main Interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(void)
+{
+        unsigned int ip, pend, group;
+        volatile unsigned int *addr;
+        unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+        if (cp0_cause & CAUSEF_IP7) {
+                do_IRQ(7);
+        } else {
+                ip = (cp0_cause & 0x7c00);
+                if (ip) {
+                        group = 21 + (fls(ip) - 32);
+
+                        addr = intr_group[group].base_addr;
+
+                        pend = READ_PEND(addr);
+                        pend &= ~READ_MASK(addr);       /* only unmasked interrupts */
+                        pend = 39 + (fls(pend) - 32);
+                        do_IRQ((group << 5) + pend);
+                }
+        }
+}
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
new file mode 100644
index 000000000000..1bc0af8febf4
--- /dev/null
+++ b/arch/mips/rb532/prom.c
@@ -0,0 +1,158 @@
+/*
+ *  RouterBoard 500 specific prom routines
+ *
+ *  Copyright (C) 2003, Peter Sadik <peter.sadik@idt.com>
+ *  Copyright (C) 2005-2006, P.Christeas <p_christ@hol.gr>
+ *  Copyright (C) 2007, Gabor Juhos <juhosg@openwrt.org>
+ *                      Felix Fietkau <nbd@openwrt.org>
+ *                      Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mach-rc32434/ddr.h>
+#include <asm/mach-rc32434/prom.h>
+
+extern void __init setup_serial_port(void);
+
+unsigned int idt_cpu_freq = 132000000;
+EXPORT_SYMBOL(idt_cpu_freq);
+unsigned int gpio_bootup_state;
+EXPORT_SYMBOL(gpio_bootup_state);
+
+static struct resource ddr_reg[] = {
+        {
+                .name = "ddr-reg",
+                .start = DDR0_PHYS_ADDR,
+                .end = DDR0_PHYS_ADDR + sizeof(struct ddr_ram),
+                .flags = IORESOURCE_MEM,
+        }
+};
+
+void __init prom_free_prom_memory(void)
+{
+        /* No prom memory to free */
+}
+
+static inline int match_tag(char *arg, const char *tag)
+{
+        return strncmp(arg, tag, strlen(tag)) == 0;
+}
+
+static inline unsigned long tag2ul(char *arg, const char *tag)
+{
+        char *num;
+
+        num = arg + strlen(tag);
+        return simple_strtoul(num, 0, 10);
+}
+
+void __init prom_setup_cmdline(void)
+{
+        char cmd_line[CL_SIZE];
+        char *cp, *board;
+        int prom_argc;
+        char **prom_argv, **prom_envp;
+        int i;
+
+        prom_argc = fw_arg0;
+        prom_argv = (char **) fw_arg1;
+        prom_envp = (char **) fw_arg2;
+
+        cp = cmd_line;
+                /* Note: it is common that parameters start
+                 * at argv[1] and not argv[0],
+                 * however, our elf loader starts at [0] */
+        for (i = 0; i < prom_argc; i++) {
+                if (match_tag(prom_argv[i], FREQ_TAG)) {
+                        idt_cpu_freq = tag2ul(prom_argv[i], FREQ_TAG);
+                        continue;
+                }
+#ifdef IGNORE_CMDLINE_MEM
+                /* parses out the "mem=xx" arg */
+                if (match_tag(prom_argv[i], MEM_TAG))
+                        continue;
+#endif
+                if (i > 0)
+                        *(cp++) = ' ';
+                if (match_tag(prom_argv[i], BOARD_TAG)) {
+                        board = prom_argv[i] + strlen(BOARD_TAG);
+
+                        if (match_tag(board, BOARD_RB532A))
+                                mips_machtype = MACH_MIKROTIK_RB532A;
+                        else
+                                mips_machtype = MACH_MIKROTIK_RB532;
+                }
+
+                if (match_tag(prom_argv[i], GPIO_TAG))
+                        gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
+
+                strcpy(cp, prom_argv[i]);
+                cp += strlen(prom_argv[i]);
+        }
+        *(cp++) = ' ';
+
+        i = strlen(arcs_cmdline);
+        if (i > 0) {
+                *(cp++) = ' ';
+                strcpy(cp, arcs_cmdline);
+                cp += strlen(arcs_cmdline);
+        }
+        if (gpio_bootup_state & 0x02)
+                strcpy(cp, GPIO_INIT_NOBUTTON);
+        else
+                strcpy(cp, GPIO_INIT_BUTTON);
+
+        cmd_line[CL_SIZE-1] = '\0';
+
+        strcpy(arcs_cmdline, cmd_line);
+}
+
+void __init prom_init(void)
+{
+        struct ddr_ram __iomem *ddr;
+        phys_t memsize;
+        phys_t ddrbase;
+
+        ddr = ioremap_nocache(ddr_reg[0].start,
+                        ddr_reg[0].end - ddr_reg[0].start);
+
+        if (!ddr) {
+                printk(KERN_ERR "Unable to remap DDR register\n");
+                return;
+        }
+
+        ddrbase = (phys_t)&ddr->ddrbase;
+        memsize = (phys_t)&ddr->ddrmask;
+        memsize = 0 - memsize;
+
+        prom_setup_cmdline();
+
+        /* give all RAM to boot allocator,
+         * except for the first 0x400 and the last 0x200 bytes */
+        add_memory_region(ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
new file mode 100644
index 000000000000..1a05b5ddee09
--- /dev/null
+++ b/arch/mips/rb532/serial.c
@@ -0,0 +1,53 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     Serial port initialisation.
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include <asm/serial.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+static struct uart_port rb532_uart = {
+        .type = PORT_16550A,
+        .line = 0,
+        .irq = RC32434_UART0_IRQ,
+        .iotype = UPIO_MEM,
+        .membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
+        .regshift = 2
+};
+
+int __init setup_serial_port(void)
+{
+        rb532_uart.uartclk = idt_cpu_freq;
+
+        return early_serial_setup(&rb532_uart);
+}
+arch_initcall(setup_serial_port);
diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
new file mode 100644
index 000000000000..7aafa95ac20b
--- /dev/null
+++ b/arch/mips/rb532/setup.c
@@ -0,0 +1,79 @@
+/*
+ * setup.c - boot time setup code
+ */
+
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/ioport.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+struct pci_reg __iomem *pci_reg;
+EXPORT_SYMBOL(pci_reg);
+
+static struct resource pci0_res[] = {
+        {
+                .name = "pci_reg0",
+                .start = PCI0_BASE_ADDR,
+                .end = PCI0_BASE_ADDR + sizeof(struct pci_reg),
+                .flags = IORESOURCE_MEM,
+        }
+};
+
+static void rb_machine_restart(char *command)
+{
+        /* just jump to the reset vector */
+        writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+        ((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
+}
+
+static void rb_machine_halt(void)
+{
+        for (;;)
+                continue;
+}
+
+void __init plat_mem_setup(void)
+{
+        u32 val;
+
+        _machine_restart = rb_machine_restart;
+        _machine_halt = rb_machine_halt;
+        pm_power_off = rb_machine_halt;
+
+        set_io_port_base(KSEG1);
+
+        pci_reg = ioremap_nocache(pci0_res[0].start,
+                                pci0_res[0].end - pci0_res[0].start);
+        if (!pci_reg) {
+                printk(KERN_ERR "Could not remap PCI registers\n");
+                return;
+        }
+
+        val = __raw_readl(&pci_reg->pcic);
+        val &= 0xFFFFFF7;
+        __raw_writel(val, (void *)&pci_reg->pcic);
+
+#ifdef CONFIG_PCI
+        /* Enable PCI interrupts in EPLD Mask register */
+        *epld_mask = 0x0;
+        *(epld_mask + 1) = 0x0;
+#endif
+        write_c0_wired(0);
+}
+
+const char *get_system_type(void)
+{
+        switch (mips_machtype) {
+        case MACH_MIKROTIK_RB532A:
+                return "Mikrotik RB532A";
+                break;
+        default:
+                return "Mikrotik RB532";
+                break;
+        }
+}
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
new file mode 100644
index 000000000000..db74edf8cefb
--- /dev/null
+++ b/arch/mips/rb532/time.c
@@ -0,0 +1,67 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ *  Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+
+#include <asm/mipsregs.h>
+#include <asm/debug.h>
+#include <asm/time.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+/*
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick. There is no RTC available.
+ *
+ * The RC32434 counts at half the CPU *core* speed.
+ */
+static unsigned long __init cal_r4koff(void)
+{
+        mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
+
+        return mips_hpt_frequency / HZ;
+}
+
+void __init plat_time_init(void)
+{
+        unsigned int est_freq, flags;
+        unsigned long r4k_offset;
+
+        local_irq_save(flags);
+
+        printk(KERN_INFO "calculating r4koff... ");
+        r4k_offset = cal_r4koff();
+        printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+
+        est_freq = 2 * r4k_offset * HZ;
+        est_freq += 5000;       /* round */
+        est_freq -= est_freq % 10000;
+        printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+               (est_freq % 1000000) * 100 / 1000000);
+        local_irq_restore(flags);
+}
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index fc6df96305ed..60141235ec40 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -188,8 +188,7 @@ static int __init sgi_button_devinit(void)
         if (ip22_is_fullhouse())
                 return 0; /* full house has no volume buttons */
 
-        return IS_ERR(platform_device_register_simple("sgiindybtns",
-                                                      -1, NULL, 0));
+        return IS_ERR(platform_device_register_simple("sgibtns", -1, NULL, 0));
 }
 
 device_initcall(sgi_button_devinit);
diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c
index fee7a2e0e538..30e12e2ec4b5 100644
--- a/arch/mips/sgi-ip22/ip28-berr.c
+++ b/arch/mips/sgi-ip22/ip28-berr.c
@@ -412,7 +412,7 @@ static int ip28_be_interrupt(const struct pt_regs *regs)
          * Now we have an asynchronous bus error, speculatively or DMA caused.
          * Need to search all DMA descriptors for the error address.
          */
-        for (i = 0; i < ARRAY_SIZE(hpc3); ++i) {
+        for (i = 0; i < sizeof(hpc3)/sizeof(struct hpc3_stat); ++i) {
                 struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i;
                 if ((cpu_err_stat & CPU_ERRMASK) &&
                     (cpu_err_addr == hp->ndptr || cpu_err_addr == hp->cbp))
@@ -421,7 +421,7 @@ static int ip28_be_interrupt(const struct pt_regs *regs)
                     (gio_err_addr == hp->ndptr || gio_err_addr == hp->cbp))
                         break;
         }
-        if (i < ARRAY_SIZE(hpc3)) {
+        if (i < sizeof(hpc3)/sizeof(struct hpc3_stat)) {
                 struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i;
                 printk(KERN_ERR "at DMA addresses: HPC3 @ %08lx:"
                        " ctl %08x, ndp %08x, cbp %08x\n",
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index 48932ce1d730..d9c79d8be81d 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -4,6 +4,7 @@
  * Copyright 2000 - 2001 Kanoj Sarcar (kanoj@sgi.com)
  */
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/kernel.h>
 #include <linux/nodemask.h>
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 42cd10956306..060d853d7b35 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -33,8 +33,6 @@
 #define SLOT_PFNSHIFT           (SLOT_SHIFT - PAGE_SHIFT)
 #define PFN_NASIDSHFT           (NASID_SHFT - PAGE_SHIFT)
 
-static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
-
 struct node_data *__node_data[MAX_COMPACT_NODES];
 
 EXPORT_SYMBOL(__node_data);
@@ -403,7 +401,7 @@ static void __init node_mem_init(cnodeid_t node)
          */
         __node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
 
-        NODE_DATA(node)->bdata = &plat_node_bdata[node];
+        NODE_DATA(node)->bdata = &bootmem_node_data[node];
         NODE_DATA(node)->node_start_pfn = start_pfn;
         NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 2ee401ba0b25..3d63721e0e80 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -85,18 +85,7 @@ device_initcall(sgio2audio_devinit);
 
 static __init int sgio2btns_devinit(void)
 {
-        struct platform_device *pd;
-        int ret;
-
-        pd = platform_device_alloc("sgio2btns", -1);
-        if (!pd)
-                return -ENOMEM;
-
-        ret = platform_device_add(pd);
-        if (ret)
-                platform_device_put(pd);
-
-        return ret;
+        return IS_ERR(platform_device_register_simple("sgibtns", -1, NULL, 0));
 }
 
 device_initcall(sgio2btns_devinit);
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 28b012ab8dcb..66e3e3fb311f 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -576,7 +576,8 @@ static int __init sbprof_tb_init(void)
 
         tb_class = tbc;
 
-        dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), "tb");
+        dev = device_create_drvdata(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0),
+                                    NULL, "tb");
         if (IS_ERR(dev)) {
                 err = PTR_ERR(dev);
                 goto out_class;
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index b92a134ef124..6de4c5aa92be 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -7,6 +7,8 @@ config TOSHIBA_RBTX4927
         bool "Toshiba RBTX49[23]7 board"
         depends on MACH_TX49XX
         select SOC_TX4927
+        # TX4937 is subset of TX4938
+        select SOC_TX4938
         help
           This Toshiba board is based on the TX4927 processor. Say Y here to
           support this machine type
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
index 668fdaad6448..9c120771e65f 100644
--- a/arch/mips/txx9/generic/Makefile
+++ b/arch/mips/txx9/generic/Makefile
@@ -4,8 +4,8 @@
 
 obj-y   += setup.o
 obj-$(CONFIG_PCI)       += pci.o
-obj-$(CONFIG_SOC_TX4927)        += mem_tx4927.o irq_tx4927.o
-obj-$(CONFIG_SOC_TX4938)        += mem_tx4938.o irq_tx4938.o
+obj-$(CONFIG_SOC_TX4927)        += mem_tx4927.o setup_tx4927.o irq_tx4927.o
+obj-$(CONFIG_SOC_TX4938)        += mem_tx4927.o setup_tx4938.o irq_tx4938.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)    += smsc_fdc37m81x.o
 obj-$(CONFIG_KGDB)      += dbgio.o
 
diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c
index 6377bd8a9050..cbea1fdde82b 100644
--- a/arch/mips/txx9/generic/irq_tx4927.c
+++ b/arch/mips/txx9/generic/irq_tx4927.c
@@ -31,7 +31,7 @@
 void __init tx4927_irq_init(void)
 {
         mips_cpu_irq_init();
-        txx9_irq_init(TX4927_IRC_REG);
+        txx9_irq_init(TX4927_IRC_REG & 0xfffffffffULL);
         set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT,
                                 handle_simple_irq);
 }
diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c
index 5fc86c9c9d2f..6eac684bf190 100644
--- a/arch/mips/txx9/generic/irq_tx4938.c
+++ b/arch/mips/txx9/generic/irq_tx4938.c
@@ -19,7 +19,7 @@
 void __init tx4938_irq_init(void)
 {
         mips_cpu_irq_init();
-        txx9_irq_init(TX4938_IRC_REG);
+        txx9_irq_init(TX4938_IRC_REG & 0xfffffffffULL);
         set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT,
                                 handle_simple_irq);
 }
diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c
index 12dfc377bf2f..ef6ea6e97873 100644
--- a/arch/mips/txx9/generic/mem_tx4927.c
+++ b/arch/mips/txx9/generic/mem_tx4927.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/mips/tx4927/common/tx4927_prom.c
+ * linux/arch/mips/txx9/generic/mem_tx4927.c
  *
  * common tx4927 memory interface
  *
@@ -32,8 +32,9 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/io.h>
+#include <asm/txx9/tx4927.h>
 
-static unsigned int __init tx4927_process_sdccr(unsigned long addr)
+static unsigned int __init tx4927_process_sdccr(u64 __iomem *addr)
 {
         u64 val;
         unsigned int sdccr_ce;
@@ -45,97 +46,32 @@ static unsigned int __init tx4927_process_sdccr(unsigned long addr)
         unsigned int rs = 0;
         unsigned int cs = 0;
         unsigned int mw = 0;
-        unsigned int msize = 0;
 
-        val = __raw_readq((void __iomem *)addr);
+        val = __raw_readq(addr);
 
         /* MVMCP -- need #defs for these bits masks */
         sdccr_ce = ((val & (1 << 10)) >> 10);
         sdccr_bs = ((val & (1 << 8)) >> 8);
         sdccr_rs = ((val & (3 << 5)) >> 5);
-        sdccr_cs = ((val & (3 << 2)) >> 2);
+        sdccr_cs = ((val & (7 << 2)) >> 2);
         sdccr_mw = ((val & (1 << 0)) >> 0);
 
         if (sdccr_ce) {
-                switch (sdccr_bs) {
-                case 0:{
-                                bs = 2;
-                                break;
-                        }
-                case 1:{
-                                bs = 4;
-                                break;
-                        }
-                }
-                switch (sdccr_rs) {
-                case 0:{
-                                rs = 2048;
-                                break;
-                        }
-                case 1:{
-                                rs = 4096;
-                                break;
-                        }
-                case 2:{
-                                rs = 8192;
-                                break;
-                        }
-                case 3:{
-                                rs = 0;
-                                break;
-                        }
-                }
-                switch (sdccr_cs) {
-                case 0:{
-                                cs = 256;
-                                break;
-                        }
-                case 1:{
-                                cs = 512;
-                                break;
-                        }
-                case 2:{
-                                cs = 1024;
-                                break;
-                        }
-                case 3:{
-                                cs = 2048;
-                                break;
-                        }
-                }
-                switch (sdccr_mw) {
-                case 0:{
-                                mw = 8;
-                                break;
-                        }       /* 8 bytes = 64 bits */
-                case 1:{
-                                mw = 4;
-                                break;
-                        }       /* 4 bytes = 32 bits */
-                }
+                bs = 2 << sdccr_bs;
+                rs = 2048 << sdccr_rs;
+                cs = 256 << sdccr_cs;
+                mw = 8 >> sdccr_mw;
         }
 
-        /*            bytes per chip     MB per chip      num chips */
-        msize = (((rs * cs * mw) / (1024 * 1024)) * bs);
-
-        return (msize);
+        return rs * cs * mw * bs;
 }
 
-
 unsigned int __init tx4927_get_mem_size(void)
 {
-        unsigned int c0;
-        unsigned int c1;
-        unsigned int c2;
-        unsigned int c3;
-        unsigned int total;
-
-        /* MVMCP -- need #defs for these registers */
-        c0 = tx4927_process_sdccr(0xff1f8000);
-        c1 = tx4927_process_sdccr(0xff1f8008);
-        c2 = tx4927_process_sdccr(0xff1f8010);
-        c3 = tx4927_process_sdccr(0xff1f8018);
-        total = c0 + c1 + c2 + c3;
+        unsigned int total = 0;
+        int i;
 
-        return (total);
+        for (i = 0; i < ARRAY_SIZE(tx4927_sdramcptr->cr); i++)
+                total += tx4927_process_sdccr(&tx4927_sdramcptr->cr[i]);
+        return total;
 }
diff --git a/arch/mips/txx9/generic/mem_tx4938.c b/arch/mips/txx9/generic/mem_tx4938.c
deleted file mode 100644
index 20baeaeba4cd..000000000000
--- a/arch/mips/txx9/generic/mem_tx4938.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/prom.c
- *
- * common tx4938 memory interface
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-static unsigned int __init
-tx4938_process_sdccr(u64 * addr)
-{
-        u64 val;
-        unsigned int sdccr_ce;
-        unsigned int sdccr_rs;
-        unsigned int sdccr_cs;
-        unsigned int sdccr_mw;
-        unsigned int rs = 0;
-        unsigned int cs = 0;
-        unsigned int mw = 0;
-        unsigned int bc = 4;
-        unsigned int msize = 0;
-
-        val = ____raw_readq((void __iomem *)addr);
-
-        /* MVMCP -- need #defs for these bits masks */
-        sdccr_ce = ((val & (1 << 10)) >> 10);
-        sdccr_rs = ((val & (3 << 5)) >> 5);
-        sdccr_cs = ((val & (7 << 2)) >> 2);
-        sdccr_mw = ((val & (1 << 0)) >> 0);
-
-        if (sdccr_ce) {
-                switch (sdccr_rs) {
-                case 0:{
-                                rs = 2048;
-                                break;
-                        }
-                case 1:{
-                                rs = 4096;
-                                break;
-                        }
-                case 2:{
-                                rs = 8192;
-                                break;
-                        }
-                default:{
-                                rs = 0;
-                                break;
-                        }
-                }
-                switch (sdccr_cs) {
-                case 0:{
-                                cs = 256;
-                                break;
-                        }
-                case 1:{
-                                cs = 512;
-                                break;
-                        }
-                case 2:{
-                                cs = 1024;
-                                break;
-                        }
-                case 3:{
-                                cs = 2048;
-                                break;
-                        }
-                case 4:{
-                                cs = 4096;
-                                break;
-                        }
-                default:{
-                                cs = 0;
-                                break;
-                        }
-                }
-                switch (sdccr_mw) {
-                case 0:{
-                                mw = 8;
-                                break;
-                        }       /* 8 bytes = 64 bits */
-                case 1:{
-                                mw = 4;
-                                break;
-                        }       /* 4 bytes = 32 bits */
-                }
-        }
-
-        /*           bytes per chip    MB per chip          bank count */
-        msize = (((rs * cs * mw) / (1024 * 1024)) * (bc));
-
-        /* MVMCP -- bc hard coded to 4 from table 9.3.1     */
-        /*          boad supports bc=2 but no way to detect */
-
-        return (msize);
-}
-
-unsigned int __init
-tx4938_get_mem_size(void)
-{
-        unsigned int c0;
-        unsigned int c1;
-        unsigned int c2;
-        unsigned int c3;
-        unsigned int total;
-
-        /* MVMCP -- need #defs for these registers */
-        c0 = tx4938_process_sdccr((u64 *) 0xff1f8000);
-        c1 = tx4938_process_sdccr((u64 *) 0xff1f8008);
-        c2 = tx4938_process_sdccr((u64 *) 0xff1f8010);
-        c3 = tx4938_process_sdccr((u64 *) 0xff1f8018);
-        total = c0 + c1 + c2 + c3;
-
-        return (total);
-}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 5afc5d5cab03..8c60c78b9a9e 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -19,7 +19,9 @@
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/gpio.h>
 #include <asm/bootinfo.h>
+#include <asm/time.h>
 #include <asm/txx9/generic.h>
 #ifdef CONFIG_CPU_TX49XX
 #include <asm/txx9/tx4938.h>
@@ -30,6 +32,7 @@ struct resource txx9_ce_res[8];
 static char txx9_ce_res_name[8][4];     /* "CEn" */
 
 /* pcode, internal register */
+unsigned int txx9_pcode;
 char txx9_pcode_str[8];
 static struct resource txx9_reg_res = {
         .name = txx9_pcode_str,
@@ -59,15 +62,16 @@ unsigned int txx9_master_clock;
 unsigned int txx9_cpu_clock;
 unsigned int txx9_gbus_clock;
 
+int txx9_ccfg_toeon __initdata = 1;
 
 /* Minimum CLK support */
 
 struct clk *clk_get(struct device *dev, const char *id)
 {
         if (!strcmp(id, "spi-baseclk"))
-                return (struct clk *)(txx9_gbus_clock / 2 / 4);
+                return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 4);
         if (!strcmp(id, "imbus_clk"))
-                return (struct clk *)(txx9_gbus_clock / 2);
+                return (struct clk *)((unsigned long)txx9_gbus_clock / 2);
         return ERR_PTR(-ENOENT);
 }
 EXPORT_SYMBOL(clk_get);
@@ -94,6 +98,22 @@ void clk_put(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_put);
 
+/* GPIO support */
+
+#ifdef CONFIG_GENERIC_GPIO
+int gpio_to_irq(unsigned gpio)
+{
+        return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(unsigned irq)
+{
+        return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+#endif
+
 extern struct txx9_board_vec jmr3927_vec;
 extern struct txx9_board_vec rbtx4927_vec;
 extern struct txx9_board_vec rbtx4937_vec;
@@ -107,6 +127,12 @@ void __init prom_init_cmdline(void)
         int argc = (int)fw_arg0;
         char **argv = (char **)fw_arg1;
         int i;                  /* Always ignore the "-c" at argv[0] */
+#ifdef CONFIG_64BIT
+        char *fixed_argv[32];
+        for (i = 0; i < argc; i++)
+                fixed_argv[i] = (char *)(long)(*((__s32 *)argv + i));
+        argv = fixed_argv;
+#endif
 
         /* ignore all built-in args if any f/w args given */
         if (argc > 1)
@@ -126,15 +152,19 @@ void __init prom_init(void)
 #endif
 #ifdef CONFIG_CPU_TX49XX
         switch (TX4938_REV_PCODE()) {
+#ifdef CONFIG_TOSHIBA_RBTX4927
         case 0x4927:
                 txx9_board_vec = &rbtx4927_vec;
                 break;
         case 0x4937:
                 txx9_board_vec = &rbtx4937_vec;
                 break;
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4938
         case 0x4938:
                 txx9_board_vec = &rbtx4938_vec;
                 break;
+#endif
         }
 #endif
 
@@ -160,6 +190,10 @@ char * __init prom_getcmdline(void)
 /* wrappers */
 void __init plat_mem_setup(void)
 {
+        ioport_resource.start = 0;
+        ioport_resource.end = ~0UL;     /* no limit */
+        iomem_resource.start = 0;
+        iomem_resource.end = ~0UL;      /* no limit */
         txx9_board_vec->mem_setup();
 }
 
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
new file mode 100644
index 000000000000..89d6e28add93
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -0,0 +1,194 @@
+/*
+ * TX4927 setup routines
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *          and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/param.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4927.h>
+
+void __init tx4927_wdr_init(void)
+{
+        /* clear WatchDogReset (W1C) */
+        tx4927_ccfg_set(TX4927_CCFG_WDRST);
+        /* do reset on watchdog */
+        tx4927_ccfg_set(TX4927_CCFG_WR);
+}
+
+static struct resource tx4927_sdram_resource[4];
+
+void __init tx4927_setup(void)
+{
+        int i;
+        __u32 divmode;
+        int cpuclk = 0;
+        u64 ccfg;
+
+        txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
+                          TX4927_REG_SIZE);
+
+        /* SDRAMC,EBUSC are configured by PROM */
+        for (i = 0; i < 8; i++) {
+                if (!(TX4927_EBUSC_CR(i) & 0x8))
+                        continue;       /* disabled */
+                txx9_ce_res[i].start = (unsigned long)TX4927_EBUSC_BA(i);
+                txx9_ce_res[i].end =
+                        txx9_ce_res[i].start + TX4927_EBUSC_SIZE(i) - 1;
+                request_resource(&iomem_resource, &txx9_ce_res[i]);
+        }
+
+        /* clocks */
+        ccfg = ____raw_readq(&tx4927_ccfgptr->ccfg);
+        if (txx9_master_clock) {
+                /* calculate gbus_clock and cpu_clock from master_clock */
+                divmode = (__u32)ccfg & TX4927_CCFG_DIVMODE_MASK;
+                switch (divmode) {
+                case TX4927_CCFG_DIVMODE_8:
+                case TX4927_CCFG_DIVMODE_10:
+                case TX4927_CCFG_DIVMODE_12:
+                case TX4927_CCFG_DIVMODE_16:
+                        txx9_gbus_clock = txx9_master_clock * 4; break;
+                default:
+                        txx9_gbus_clock = txx9_master_clock;
+                }
+                switch (divmode) {
+                case TX4927_CCFG_DIVMODE_2:
+                case TX4927_CCFG_DIVMODE_8:
+                        cpuclk = txx9_gbus_clock * 2; break;
+                case TX4927_CCFG_DIVMODE_2_5:
+                case TX4927_CCFG_DIVMODE_10:
+                        cpuclk = txx9_gbus_clock * 5 / 2; break;
+                case TX4927_CCFG_DIVMODE_3:
+                case TX4927_CCFG_DIVMODE_12:
+                        cpuclk = txx9_gbus_clock * 3; break;
+                case TX4927_CCFG_DIVMODE_4:
+                case TX4927_CCFG_DIVMODE_16:
+                        cpuclk = txx9_gbus_clock * 4; break;
+                }
+                txx9_cpu_clock = cpuclk;
+        } else {
+                if (txx9_cpu_clock == 0)
+                        txx9_cpu_clock = 200000000;     /* 200MHz */
+                /* calculate gbus_clock and master_clock from cpu_clock */
+                cpuclk = txx9_cpu_clock;
+                divmode = (__u32)ccfg & TX4927_CCFG_DIVMODE_MASK;
+                switch (divmode) {
+                case TX4927_CCFG_DIVMODE_2:
+                case TX4927_CCFG_DIVMODE_8:
+                        txx9_gbus_clock = cpuclk / 2; break;
+                case TX4927_CCFG_DIVMODE_2_5:
+                case TX4927_CCFG_DIVMODE_10:
+                        txx9_gbus_clock = cpuclk * 2 / 5; break;
+                case TX4927_CCFG_DIVMODE_3:
+                case TX4927_CCFG_DIVMODE_12:
+                        txx9_gbus_clock = cpuclk / 3; break;
+                case TX4927_CCFG_DIVMODE_4:
+                case TX4927_CCFG_DIVMODE_16:
+                        txx9_gbus_clock = cpuclk / 4; break;
+                }
+                switch (divmode) {
+                case TX4927_CCFG_DIVMODE_8:
+                case TX4927_CCFG_DIVMODE_10:
+                case TX4927_CCFG_DIVMODE_12:
+                case TX4927_CCFG_DIVMODE_16:
+                        txx9_master_clock = txx9_gbus_clock / 4; break;
+                default:
+                        txx9_master_clock = txx9_gbus_clock;
+                }
+        }
+        /* change default value to udelay/mdelay take reasonable time */
+        loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+        /* CCFG */
+        tx4927_wdr_init();
+        /* clear BusErrorOnWrite flag (W1C) */
+        tx4927_ccfg_set(TX4927_CCFG_BEOW);
+        /* enable Timeout BusError */
+        if (txx9_ccfg_toeon)
+                tx4927_ccfg_set(TX4927_CCFG_TOE);
+
+        /* DMA selection */
+        txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_DMASEL_ALL);
+
+        /* Use external clock for external arbiter */
+        if (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB))
+                txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_PCICLKEN_ALL);
+
+        printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+               txx9_pcode_str,
+               (cpuclk + 500000) / 1000000,
+               (txx9_master_clock + 500000) / 1000000,
+               (__u32)____raw_readq(&tx4927_ccfgptr->crir),
+               (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg),
+               (unsigned long long)____raw_readq(&tx4927_ccfgptr->pcfg));
+
+        printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+        for (i = 0; i < 4; i++) {
+                __u64 cr = TX4927_SDRAMC_CR(i);
+                unsigned long base, size;
+                if (!((__u32)cr & 0x00000400))
+                        continue;       /* disabled */
+                base = (unsigned long)(cr >> 49) << 21;
+                size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21;
+                printk(" CR%d:%016llx", i, (unsigned long long)cr);
+                tx4927_sdram_resource[i].name = "SDRAM";
+                tx4927_sdram_resource[i].start = base;
+                tx4927_sdram_resource[i].end = base + size - 1;
+                tx4927_sdram_resource[i].flags = IORESOURCE_MEM;
+                request_resource(&iomem_resource, &tx4927_sdram_resource[i]);
+        }
+        printk(" TR:%09llx\n",
+               (unsigned long long)____raw_readq(&tx4927_sdramcptr->tr));
+
+        /* TMR */
+        /* disable all timers */
+        for (i = 0; i < TX4927_NR_TMR; i++)
+                txx9_tmr_init(TX4927_TMR_REG(i) & 0xfffffffffULL);
+
+        /* PIO */
+        txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
+        __raw_writel(0, &tx4927_pioptr->maskcpu);
+        __raw_writel(0, &tx4927_pioptr->maskext);
+}
+
+void __init tx4927_time_init(unsigned int tmrnr)
+{
+        if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
+                txx9_clockevent_init(TX4927_TMR_REG(tmrnr) & 0xfffffffffULL,
+                                     TXX9_IRQ_BASE + TX4927_IR_TMR(tmrnr),
+                                     TXX9_IMCLK);
+}
+
+void __init tx4927_setup_serial(void)
+{
+#ifdef CONFIG_SERIAL_TXX9
+        int i;
+        struct uart_port req;
+
+        for (i = 0; i < 2; i++) {
+                memset(&req, 0, sizeof(req));
+                req.line = i;
+                req.iotype = UPIO_MEM;
+                req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i);
+                req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL;
+                req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
+                req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+                req.uartclk = TXX9_IMCLK;
+                early_serial_txx9_setup(&req);
+        }
+#endif /* CONFIG_SERIAL_TXX9 */
+}
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
new file mode 100644
index 000000000000..317378d8579d
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -0,0 +1,259 @@
+/*
+ * TX4938/4937 setup routines
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *          and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/param.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4938.h>
+
+void __init tx4938_wdr_init(void)
+{
+        /* clear WatchDogReset (W1C) */
+        tx4938_ccfg_set(TX4938_CCFG_WDRST);
+        /* do reset on watchdog */
+        tx4938_ccfg_set(TX4938_CCFG_WR);
+}
+
+static struct resource tx4938_sdram_resource[4];
+static struct resource tx4938_sram_resource;
+
+#define TX4938_SRAM_SIZE 0x800
+
+void __init tx4938_setup(void)
+{
+        int i;
+        __u32 divmode;
+        int cpuclk = 0;
+        u64 ccfg;
+
+        txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
+                          TX4938_REG_SIZE);
+
+        /* SDRAMC,EBUSC are configured by PROM */
+        for (i = 0; i < 8; i++) {
+                if (!(TX4938_EBUSC_CR(i) & 0x8))
+                        continue;       /* disabled */
+                txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i);
+                txx9_ce_res[i].end =
+                        txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1;
+                request_resource(&iomem_resource, &txx9_ce_res[i]);
+        }
+
+        /* clocks */
+        ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg);
+        if (txx9_master_clock) {
+                /* calculate gbus_clock and cpu_clock from master_clock */
+                divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
+                switch (divmode) {
+                case TX4938_CCFG_DIVMODE_8:
+                case TX4938_CCFG_DIVMODE_10:
+                case TX4938_CCFG_DIVMODE_12:
+                case TX4938_CCFG_DIVMODE_16:
+                case TX4938_CCFG_DIVMODE_18:
+                        txx9_gbus_clock = txx9_master_clock * 4; break;
+                default:
+                        txx9_gbus_clock = txx9_master_clock;
+                }
+                switch (divmode) {
+                case TX4938_CCFG_DIVMODE_2:
+                case TX4938_CCFG_DIVMODE_8:
+                        cpuclk = txx9_gbus_clock * 2; break;
+                case TX4938_CCFG_DIVMODE_2_5:
+                case TX4938_CCFG_DIVMODE_10:
+                        cpuclk = txx9_gbus_clock * 5 / 2; break;
+                case TX4938_CCFG_DIVMODE_3:
+                case TX4938_CCFG_DIVMODE_12:
+                        cpuclk = txx9_gbus_clock * 3; break;
+                case TX4938_CCFG_DIVMODE_4:
+                case TX4938_CCFG_DIVMODE_16:
+                        cpuclk = txx9_gbus_clock * 4; break;
+                case TX4938_CCFG_DIVMODE_4_5:
+                case TX4938_CCFG_DIVMODE_18:
+                        cpuclk = txx9_gbus_clock * 9 / 2; break;
+                }
+                txx9_cpu_clock = cpuclk;
+        } else {
+                if (txx9_cpu_clock == 0)
+                        txx9_cpu_clock = 300000000;     /* 300MHz */
+                /* calculate gbus_clock and master_clock from cpu_clock */
+                cpuclk = txx9_cpu_clock;
+                divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
+                switch (divmode) {
+                case TX4938_CCFG_DIVMODE_2:
+                case TX4938_CCFG_DIVMODE_8:
+                        txx9_gbus_clock = cpuclk / 2; break;
+                case TX4938_CCFG_DIVMODE_2_5:
+                case TX4938_CCFG_DIVMODE_10:
+                        txx9_gbus_clock = cpuclk * 2 / 5; break;
+                case TX4938_CCFG_DIVMODE_3:
+                case TX4938_CCFG_DIVMODE_12:
+                        txx9_gbus_clock = cpuclk / 3; break;
+                case TX4938_CCFG_DIVMODE_4:
+                case TX4938_CCFG_DIVMODE_16:
+                        txx9_gbus_clock = cpuclk / 4; break;
+                case TX4938_CCFG_DIVMODE_4_5:
+                case TX4938_CCFG_DIVMODE_18:
+                        txx9_gbus_clock = cpuclk * 2 / 9; break;
+                }
+                switch (divmode) {
+                case TX4938_CCFG_DIVMODE_8:
+                case TX4938_CCFG_DIVMODE_10:
+                case TX4938_CCFG_DIVMODE_12:
+                case TX4938_CCFG_DIVMODE_16:
+                case TX4938_CCFG_DIVMODE_18:
+                        txx9_master_clock = txx9_gbus_clock / 4; break;
+                default:
+                        txx9_master_clock = txx9_gbus_clock;
+                }
+        }
+        /* change default value to udelay/mdelay take reasonable time */
+        loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+        /* CCFG */
+        tx4938_wdr_init();
+        /* clear BusErrorOnWrite flag (W1C) */
+        tx4938_ccfg_set(TX4938_CCFG_BEOW);
+        /* enable Timeout BusError */
+        if (txx9_ccfg_toeon)
+                tx4938_ccfg_set(TX4938_CCFG_TOE);
+
+        /* DMA selection */
+        txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL);
+
+        /* Use external clock for external arbiter */
+        if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB))
+                txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL);
+
+        printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+               txx9_pcode_str,
+               (cpuclk + 500000) / 1000000,
+               (txx9_master_clock + 500000) / 1000000,
+               (__u32)____raw_readq(&tx4938_ccfgptr->crir),
+               (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg),
+               (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg));
+
+        printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+        for (i = 0; i < 4; i++) {
+                __u64 cr = TX4938_SDRAMC_CR(i);
+                unsigned long base, size;
+                if (!((__u32)cr & 0x00000400))
+                        continue;       /* disabled */
+                base = (unsigned long)(cr >> 49) << 21;
+                size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21;
+                printk(" CR%d:%016llx", i, (unsigned long long)cr);
+                tx4938_sdram_resource[i].name = "SDRAM";
+                tx4938_sdram_resource[i].start = base;
+                tx4938_sdram_resource[i].end = base + size - 1;
+                tx4938_sdram_resource[i].flags = IORESOURCE_MEM;
+                request_resource(&iomem_resource, &tx4938_sdram_resource[i]);
+        }
+        printk(" TR:%09llx\n",
+               (unsigned long long)____raw_readq(&tx4938_sdramcptr->tr));
+
+        /* SRAM */
+        if (txx9_pcode == 0x4938 && ____raw_readq(&tx4938_sramcptr->cr) & 1) {
+                unsigned int size = TX4938_SRAM_SIZE;
+                tx4938_sram_resource.name = "SRAM";
+                tx4938_sram_resource.start =
+                        (____raw_readq(&tx4938_sramcptr->cr) >> (39-11))
+                        & ~(size - 1);
+                tx4938_sram_resource.end =
+                        tx4938_sram_resource.start + TX4938_SRAM_SIZE - 1;
+                tx4938_sram_resource.flags = IORESOURCE_MEM;
+                request_resource(&iomem_resource, &tx4938_sram_resource);
+        }
+
+        /* TMR */
+        /* disable all timers */
+        for (i = 0; i < TX4938_NR_TMR; i++)
+                txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
+
+        /* DMA */
+        for (i = 0; i < 2; i++)
+                ____raw_writeq(TX4938_DMA_MCR_MSTEN,
+                               (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
+
+        /* PIO */
+        txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
+        __raw_writel(0, &tx4938_pioptr->maskcpu);
+        __raw_writel(0, &tx4938_pioptr->maskext);
+
+        if (txx9_pcode == 0x4938) {
+                __u64 pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+                /* set PCIC1 reset */
+                txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+                if (pcfg & (TX4938_PCFG_ETH0_SEL | TX4938_PCFG_ETH1_SEL)) {
+                        mdelay(1);      /* at least 128 cpu clock */
+                        /* clear PCIC1 reset */
+                        txx9_clear64(&tx4938_ccfgptr->clkctr,
+                                     TX4938_CLKCTR_PCIC1RST);
+                } else {
+                        printk(KERN_INFO "%s: stop PCIC1\n", txx9_pcode_str);
+                        /* stop PCIC1 */
+                        txx9_set64(&tx4938_ccfgptr->clkctr,
+                                   TX4938_CLKCTR_PCIC1CKD);
+                }
+                if (!(pcfg & TX4938_PCFG_ETH0_SEL)) {
+                        printk(KERN_INFO "%s: stop ETH0\n", txx9_pcode_str);
+                        txx9_set64(&tx4938_ccfgptr->clkctr,
+                                   TX4938_CLKCTR_ETH0RST);
+                        txx9_set64(&tx4938_ccfgptr->clkctr,
+                                   TX4938_CLKCTR_ETH0CKD);
+                }
+                if (!(pcfg & TX4938_PCFG_ETH1_SEL)) {
+                        printk(KERN_INFO "%s: stop ETH1\n", txx9_pcode_str);
+                        txx9_set64(&tx4938_ccfgptr->clkctr,
+                                   TX4938_CLKCTR_ETH1RST);
+                        txx9_set64(&tx4938_ccfgptr->clkctr,
+                                   TX4938_CLKCTR_ETH1CKD);
+                }
+        }
+}
+
+void __init tx4938_time_init(unsigned int tmrnr)
+{
+        if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS)
+                txx9_clockevent_init(TX4938_TMR_REG(tmrnr) & 0xfffffffffULL,
+                                     TXX9_IRQ_BASE + TX4938_IR_TMR(tmrnr),
+                                     TXX9_IMCLK);
+}
+
+void __init tx4938_setup_serial(void)
+{
+#ifdef CONFIG_SERIAL_TXX9
+        int i;
+        struct uart_port req;
+        unsigned int ch_mask = 0;
+
+        if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
+                ch_mask |= 1 << 1; /* disable SIO1 by PCFG setting */
+        for (i = 0; i < 2; i++) {
+                if ((1 << i) & ch_mask)
+                        continue;
+                memset(&req, 0, sizeof(req));
+                req.line = i;
+                req.iotype = UPIO_MEM;
+                req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i);
+                req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL;
+                req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i);
+                req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+                req.uartclk = TXX9_IMCLK;
+                early_serial_txx9_setup(&req);
+        }
+#endif /* CONFIG_SERIAL_TXX9 */
+}
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 5e35ef73c5a5..03647ebe4130 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -105,14 +105,6 @@ static void __init jmr3927_mem_setup(void)
         _machine_halt = jmr3927_machine_halt;
         pm_power_off = jmr3927_machine_power_off;
 
-        /*
-         * IO/MEM resources.
-         */
-        ioport_resource.start = 0;
-        ioport_resource.end = 0xffffffff;
-        iomem_resource.start = 0;
-        iomem_resource.end = 0xffffffff;
-
         /* Reboot on panic */
         panic_timeout = 180;
 
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
index 70f13211bc2a..cd748a930328 100644
--- a/arch/mips/txx9/rbtx4927/irq.c
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -126,14 +126,12 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
         .mask_ack = toshiba_rbtx4927_irq_ioc_disable,
         .unmask = toshiba_rbtx4927_irq_ioc_enable,
 };
-#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL
-#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL
 
 static int toshiba_rbtx4927_irq_nested(int sw_irq)
 {
         u8 level3;
 
-        level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f;
+        level3 = readb(rbtx4927_imstat_addr) & 0x1f;
         if (level3)
                 sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
         return (sw_irq);
@@ -154,18 +152,18 @@ static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq)
 {
         unsigned char v;
 
-        v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+        v = readb(rbtx4927_imask_addr);
         v |= (1 << (irq - RBTX4927_IRQ_IOC));
-        writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+        writeb(v, rbtx4927_imask_addr);
 }
 
 static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq)
 {
         unsigned char v;
 
-        v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+        v = readb(rbtx4927_imask_addr);
         v &= ~(1 << (irq - RBTX4927_IRQ_IOC));
-        writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+        writeb(v, rbtx4927_imask_addr);
         mmiowb();
 }
 
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index 942e627d2dc1..5c0de54ebdd2 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -36,10 +36,6 @@
 
 void __init rbtx4927_prom_init(void)
 {
-        extern int tx4927_get_mem_size(void);
-        int msize;
-
         prom_init_cmdline();
-        msize = tx4927_get_mem_size();
-        add_memory_region(0, msize << 20, BOOT_MEM_RAM);
+        add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 1657fd935da8..3da20ea3e55c 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -53,17 +53,10 @@
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/txx9tmr.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/rbtx4927.h>
 #include <asm/txx9/tx4938.h>    /* for TX4937 */
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-
-static int tx4927_ccfg_toeon = 1;
 
 #ifdef CONFIG_PCI
 static void __init tx4927_pci_setup(void)
@@ -184,14 +177,14 @@ static void toshiba_rbtx4927_restart(char *command)
         printk(KERN_NOTICE "System Rebooting...\n");
 
         /* enable the s/w reset register */
-        writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE);
+        writeb(1, rbtx4927_softresetlock_addr);
 
         /* wait for enable to be seen */
-        while ((readb(RBTX4927_SW_RESET_ENABLE) &
-                RBTX4927_SW_RESET_ENABLE_SET) == 0x00);
+        while (!(readb(rbtx4927_softresetlock_addr) & 1))
+                ;
 
         /* do a s/w reset */
-        writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO);
+        writeb(1, rbtx4927_softreset_addr);
 
         /* do something passive while waiting for reset */
         local_irq_disable();
@@ -213,9 +206,11 @@ static void toshiba_rbtx4927_power_off(void)
         /* no return */
 }
 
+static void __init rbtx4927_clock_init(void);
+static void __init rbtx4937_clock_init(void);
+
 static void __init rbtx4927_mem_setup(void)
 {
-        int i;
         u32 cp0_config;
         char *argptr;
 
@@ -227,16 +222,18 @@ static void __init rbtx4927_mem_setup(void)
         cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
         write_c0_config(cp0_config);
 
-        ioport_resource.end = 0xffffffff;
-        iomem_resource.end = 0xffffffff;
+        if (TX4927_REV_PCODE() == 0x4927) {
+                rbtx4927_clock_init();
+                tx4927_setup();
+        } else {
+                rbtx4937_clock_init();
+                tx4938_setup();
+        }
 
         _machine_restart = toshiba_rbtx4927_restart;
         _machine_halt = toshiba_rbtx4927_halt;
         pm_power_off = toshiba_rbtx4927_power_off;
 
-        for (i = 0; i < TX4927_NR_TMR; i++)
-                txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL);
-
 #ifdef CONFIG_PCI
         txx9_alloc_pci_controller(&txx9_primary_pcic,
                                   RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
@@ -245,36 +242,13 @@ static void __init rbtx4927_mem_setup(void)
         set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
 #endif
 
-        /* CCFG */
-        /* do reset on watchdog */
-        tx4927_ccfg_set(TX4927_CCFG_WR);
-        /* enable Timeout BusError */
-        if (tx4927_ccfg_toeon)
-                tx4927_ccfg_set(TX4927_CCFG_TOE);
-
-#ifdef CONFIG_SERIAL_TXX9
-        {
-                extern int early_serial_txx9_setup(struct uart_port *port);
-                struct uart_port req;
-                for(i = 0; i < 2; i++) {
-                        memset(&req, 0, sizeof(req));
-                        req.line = i;
-                        req.iotype = UPIO_MEM;
-                        req.membase = (char *)(0xff1ff300 + i * 0x100);
-                        req.mapbase = 0xff1ff300 + i * 0x100;
-                        req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
-                        req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-                        req.uartclk = 50000000;
-                        early_serial_txx9_setup(&req);
-                }
-        }
+        tx4927_setup_serial();
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
         argptr = prom_getcmdline();
         if (strstr(argptr, "console=") == NULL) {
                 strcat(argptr, " console=ttyS0,38400");
         }
 #endif
-#endif
 
 #ifdef CONFIG_ROOT_NFS
         argptr = prom_getcmdline();
@@ -291,19 +265,7 @@ static void __init rbtx4927_mem_setup(void)
 #endif
 }
 
-static void __init rbtx49x7_common_time_init(void)
-{
-        /* change default value to udelay/mdelay take reasonable time */
-        loops_per_jiffy = txx9_cpu_clock / HZ / 2;
-
-        mips_hpt_frequency = txx9_cpu_clock / 2;
-        if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
-                txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
-                                     TXX9_IRQ_BASE + 17,
-                                     50000000);
-}
-
-static void __init rbtx4927_time_init(void)
+static void __init rbtx4927_clock_init(void)
 {
         /*
          * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
@@ -325,11 +287,9 @@ static void __init rbtx4927_time_init(void)
         default:
                 txx9_cpu_clock = 200000000;     /* 200MHz */
         }
-
-        rbtx49x7_common_time_init();
 }
 
-static void __init rbtx4937_time_init(void)
+static void __init rbtx4937_clock_init(void)
 {
         /*
          * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
@@ -357,15 +317,18 @@ static void __init rbtx4937_time_init(void)
         default:
                 txx9_cpu_clock = 333333333;     /* 333MHz */
         }
+}
 
-        rbtx49x7_common_time_init();
+static void __init rbtx4927_time_init(void)
+{
+        tx4927_time_init(0);
 }
 
 static int __init toshiba_rbtx4927_rtc_init(void)
 {
-        static struct resource __initdata res = {
-                .start  = 0x1c010000,
-                .end    = 0x1c010000 + 0x800 - 1,
+        struct resource res = {
+                .start  = RBTX4927_BRAMRTC_BASE - IO_BASE,
+                .end    = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
                 .flags  = IORESOURCE_MEM,
         };
         struct platform_device *dev =
@@ -375,7 +338,7 @@ static int __init toshiba_rbtx4927_rtc_init(void)
 
 static int __init rbtx4927_ne_init(void)
 {
-        static struct resource __initdata res[] = {
+        struct resource res[] = {
                 {
                         .start  = RBTX4927_RTL_8019_BASE,
                         .end    = RBTX4927_RTL_8019_BASE + 0x20 - 1,
@@ -434,7 +397,7 @@ struct txx9_board_vec rbtx4937_vec __initdata = {
         .prom_init = rbtx4927_prom_init,
         .mem_setup = rbtx4927_mem_setup,
         .irq_setup = rbtx4927_irq_setup,
-        .time_init = rbtx4937_time_init,
+        .time_init = rbtx4927_time_init,
         .device_init = rbtx4927_device_init,
         .arch_init = rbtx4937_arch_init,
 #ifdef CONFIG_PCI
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index fbb37458ddb2..ee189519ce5a 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -18,12 +18,8 @@
 
 void __init rbtx4938_prom_init(void)
 {
-        extern int tx4938_get_mem_size(void);
-        int msize;
 #ifndef CONFIG_TX4938_NAND_BOOT
         prom_init_cmdline();
 #endif
-
-        msize = tx4938_get_mem_size();
-        add_memory_region(0, msize << 20, BOOT_MEM_RAM);
+        add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
 }
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index aaa987ae0f83..6c2b99bb8af6 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -20,21 +20,14 @@
 #include <linux/gpio.h>
 
 #include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/txx9tmr.h>
 #include <asm/io.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/rbtx4938.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
 #include <linux/spi/spi.h>
 #include <asm/txx9/spi.h>
 #include <asm/txx9pio.h>
 
-static int tx4938_ccfg_toeon = 1;
-
 static void rbtx4938_machine_halt(void)
 {
         printk(KERN_NOTICE "System Halted\n");
@@ -182,188 +175,10 @@ static void __init rbtx4938_spi_setup(void)
 }
 
 static struct resource rbtx4938_fpga_resource;
-static struct resource tx4938_sdram_resource[4];
-static struct resource tx4938_sram_resource;
-
-void __init tx4938_board_setup(void)
-{
-        int i;
-        unsigned long divmode;
-        int cpuclk = 0;
-        unsigned long pcode = TX4938_REV_PCODE();
-
-        ioport_resource.start = 0;
-        ioport_resource.end = 0xffffffff;
-        iomem_resource.start = 0;
-        iomem_resource.end = 0xffffffff;        /* expand to 4GB */
-
-        txx9_reg_res_init(pcode, TX4938_REG_BASE,
-                          TX4938_REG_SIZE);
-        /* SDRAMC,EBUSC are configured by PROM */
-        for (i = 0; i < 8; i++) {
-                if (!(TX4938_EBUSC_CR(i) & 0x8))
-                        continue;       /* disabled */
-                txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i);
-                txx9_ce_res[i].end =
-                        txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1;
-                request_resource(&iomem_resource, &txx9_ce_res[i]);
-        }
-
-        /* clocks */
-        if (txx9_master_clock) {
-                u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg);
-                /* calculate gbus_clock and cpu_clock_freq from master_clock */
-                divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
-                switch (divmode) {
-                case TX4938_CCFG_DIVMODE_8:
-                case TX4938_CCFG_DIVMODE_10:
-                case TX4938_CCFG_DIVMODE_12:
-                case TX4938_CCFG_DIVMODE_16:
-                case TX4938_CCFG_DIVMODE_18:
-                        txx9_gbus_clock = txx9_master_clock * 4; break;
-                default:
-                        txx9_gbus_clock = txx9_master_clock;
-                }
-                switch (divmode) {
-                case TX4938_CCFG_DIVMODE_2:
-                case TX4938_CCFG_DIVMODE_8:
-                        cpuclk = txx9_gbus_clock * 2; break;
-                case TX4938_CCFG_DIVMODE_2_5:
-                case TX4938_CCFG_DIVMODE_10:
-                        cpuclk = txx9_gbus_clock * 5 / 2; break;
-                case TX4938_CCFG_DIVMODE_3:
-                case TX4938_CCFG_DIVMODE_12:
-                        cpuclk = txx9_gbus_clock * 3; break;
-                case TX4938_CCFG_DIVMODE_4:
-                case TX4938_CCFG_DIVMODE_16:
-                        cpuclk = txx9_gbus_clock * 4; break;
-                case TX4938_CCFG_DIVMODE_4_5:
-                case TX4938_CCFG_DIVMODE_18:
-                        cpuclk = txx9_gbus_clock * 9 / 2; break;
-                }
-                txx9_cpu_clock = cpuclk;
-        } else {
-                u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg);
-                if (txx9_cpu_clock == 0) {
-                        txx9_cpu_clock = 300000000;     /* 300MHz */
-                }
-                /* calculate gbus_clock and master_clock from cpu_clock_freq */
-                cpuclk = txx9_cpu_clock;
-                divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
-                switch (divmode) {
-                case TX4938_CCFG_DIVMODE_2:
-                case TX4938_CCFG_DIVMODE_8:
-                        txx9_gbus_clock = cpuclk / 2; break;
-                case TX4938_CCFG_DIVMODE_2_5:
-                case TX4938_CCFG_DIVMODE_10:
-                        txx9_gbus_clock = cpuclk * 2 / 5; break;
-                case TX4938_CCFG_DIVMODE_3:
-                case TX4938_CCFG_DIVMODE_12:
-                        txx9_gbus_clock = cpuclk / 3; break;
-                case TX4938_CCFG_DIVMODE_4:
-                case TX4938_CCFG_DIVMODE_16:
-                        txx9_gbus_clock = cpuclk / 4; break;
-                case TX4938_CCFG_DIVMODE_4_5:
-                case TX4938_CCFG_DIVMODE_18:
-                        txx9_gbus_clock = cpuclk * 2 / 9; break;
-                }
-                switch (divmode) {
-                case TX4938_CCFG_DIVMODE_8:
-                case TX4938_CCFG_DIVMODE_10:
-                case TX4938_CCFG_DIVMODE_12:
-                case TX4938_CCFG_DIVMODE_16:
-                case TX4938_CCFG_DIVMODE_18:
-                        txx9_master_clock = txx9_gbus_clock / 4; break;
-                default:
-                        txx9_master_clock = txx9_gbus_clock;
-                }
-        }
-        /* change default value to udelay/mdelay take reasonable time */
-        loops_per_jiffy = txx9_cpu_clock / HZ / 2;
-
-        /* CCFG */
-        /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
-        tx4938_ccfg_set(TX4938_CCFG_WDRST | TX4938_CCFG_BEOW);
-        /* do reset on watchdog */
-        tx4938_ccfg_set(TX4938_CCFG_WR);
-        /* clear PCIC1 reset */
-        txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
-
-        /* enable Timeout BusError */
-        if (tx4938_ccfg_toeon)
-                tx4938_ccfg_set(TX4938_CCFG_TOE);
-
-        /* DMA selection */
-        txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL);
-
-        /* Use external clock for external arbiter */
-        if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB))
-                txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL);
-
-        printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
-               txx9_pcode_str,
-               (cpuclk + 500000) / 1000000,
-               (txx9_master_clock + 500000) / 1000000,
-               (__u32)____raw_readq(&tx4938_ccfgptr->crir),
-               (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg),
-               (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg));
-
-        printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
-        for (i = 0; i < 4; i++) {
-                unsigned long long cr = tx4938_sdramcptr->cr[i];
-                unsigned long ram_base, ram_size;
-                if (!((unsigned long)cr & 0x00000400))
-                        continue;       /* disabled */
-                ram_base = (unsigned long)(cr >> 49) << 21;
-                ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
-                if (ram_base >= 0x20000000)
-                        continue;       /* high memory (ignore) */
-                printk(" CR%d:%016Lx", i, cr);
-                tx4938_sdram_resource[i].name = "SDRAM";
-                tx4938_sdram_resource[i].start = ram_base;
-                tx4938_sdram_resource[i].end = ram_base + ram_size - 1;
-                tx4938_sdram_resource[i].flags = IORESOURCE_MEM;
-                request_resource(&iomem_resource, &tx4938_sdram_resource[i]);
-        }
-        printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
-
-        /* SRAM */
-        if (tx4938_sramcptr->cr & 1) {
-                unsigned int size = 0x800;
-                unsigned long base =
-                        (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
-                tx4938_sram_resource.name = "SRAM";
-                tx4938_sram_resource.start = base;
-                tx4938_sram_resource.end = base + size - 1;
-                tx4938_sram_resource.flags = IORESOURCE_MEM;
-                request_resource(&iomem_resource, &tx4938_sram_resource);
-        }
-
-        /* TMR */
-        for (i = 0; i < TX4938_NR_TMR; i++)
-                txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
-
-        /* enable DMA */
-        for (i = 0; i < 2; i++)
-                ____raw_writeq(TX4938_DMA_MCR_MSTEN,
-                               (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
-
-        /* PIO */
-        __raw_writel(0, &tx4938_pioptr->maskcpu);
-        __raw_writel(0, &tx4938_pioptr->maskext);
-
-#ifdef CONFIG_PCI
-        txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
-#endif
-}
 
 static void __init rbtx4938_time_init(void)
 {
-        mips_hpt_frequency = txx9_cpu_clock / 2;
-        if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS)
-                txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL,
-                                     TXX9_IRQ_BASE + TX4938_IR_TMR(0),
-                                     txx9_gbus_clock / 2);
+        tx4938_time_init(0);
 }
 
 static void __init rbtx4938_mem_setup(void)
@@ -371,39 +186,24 @@ static void __init rbtx4938_mem_setup(void)
         unsigned long long pcfg;
         char *argptr;
 
-        iomem_resource.end = 0xffffffff;        /* 4GB */
-
         if (txx9_master_clock == 0)
                 txx9_master_clock = 25000000; /* 25MHz */
-        tx4938_board_setup();
-#ifndef CONFIG_PCI
+
+        tx4938_setup();
+
+#ifdef CONFIG_PCI
+        txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+#else
         set_io_port_base(RBTX4938_ETHER_BASE);
 #endif
 
-#ifdef CONFIG_SERIAL_TXX9
-        {
-                extern int early_serial_txx9_setup(struct uart_port *port);
-                int i;
-                struct uart_port req;
-                for(i = 0; i < 2; i++) {
-                        memset(&req, 0, sizeof(req));
-                        req.line = i;
-                        req.iotype = UPIO_MEM;
-                        req.membase = (char *)(0xff1ff300 + i * 0x100);
-                        req.mapbase = 0xff1ff300 + i * 0x100;
-                        req.irq = RBTX4938_IRQ_IRC_SIO(i);
-                        req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-                        req.uartclk = 50000000;
-                        early_serial_txx9_setup(&req);
-                }
-        }
+        tx4938_setup_serial();
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
         argptr = prom_getcmdline();
         if (strstr(argptr, "console=") == NULL) {
                 strcat(argptr, " console=ttyS0,38400");
         }
 #endif
-#endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
         printk("PIOSEL: disabling both ata and nand selection\n");
@@ -457,7 +257,7 @@ static void __init rbtx4938_mem_setup(void)
         rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
         rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
         rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-        if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
+        if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
                 printk("request resource for fpga failed\n");
 
         _machine_restart = rbtx4938_machine_restart;
@@ -488,18 +288,6 @@ static int __init rbtx4938_ne_init(void)
         return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
-/* GPIO support */
-
-int gpio_to_irq(unsigned gpio)
-{
-        return -EINVAL;
-}
-
-int irq_to_gpio(unsigned irq)
-{
-        return -EINVAL;
-}
-
 static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
 
 static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
@@ -579,7 +367,6 @@ static int __init rbtx4938_spi_init(void)
 
 static void __init rbtx4938_arch_init(void)
 {
-        txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16);
         gpiochip_add(&rbtx4938_spi_gpio_chip);
         rbtx4938_pci_setup();
         rbtx4938_spi_init();
diff --git a/arch/mn10300/boot/compressed/misc.c b/arch/mn10300/boot/compressed/misc.c
index ded207efc97a..f673383518e4 100644
--- a/arch/mn10300/boot/compressed/misc.c
+++ b/arch/mn10300/boot/compressed/misc.c
@@ -153,26 +153,9 @@ static uch *output_data;
 static unsigned long output_ptr;
 
 
-static void *malloc(int size);
-
-static inline void free(void *where)
-{       /* Don't care */
-}
-
 static unsigned long free_mem_ptr = (unsigned long) &end;
 static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
 
-static inline void gzip_mark(void **ptr)
-{
-        kputs(".");
-        *ptr = (void *) free_mem_ptr;
-}
-
-static inline void gzip_release(void **ptr)
-{
-        free_mem_ptr = (unsigned long) *ptr;
-}
-
 #define INPLACE_MOVE_ROUTINE    0x1000
 #define LOW_BUFFER_START        0x2000
 #define LOW_BUFFER_END          0x90000
@@ -186,26 +169,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-        void *p;
-
-        if (size < 0)
-                error("Malloc error\n");
-        if (!free_mem_ptr)
-                error("Memory error\n");
-
-        free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
-        p = (void *) free_mem_ptr;
-        free_mem_ptr += size;
-
-        if (free_mem_ptr >= free_mem_end_ptr)
-                error("\nOut of memory\n");
-
-        return p;
-}
-
 static inline void scroll(void)
 {
         int i;
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index 21891c71d549..54be6afb5555 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -163,8 +163,6 @@ static char	input_buffer[BUFMAX];
 static char     output_buffer[BUFMAX];
 static char     trans_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 struct gdbstub_bkpt {
         u8      *addr;          /* address of breakpoint */
         u8      len;            /* size of breakpoint */
@@ -363,8 +361,8 @@ static int putpacket(char *buffer)
                 }
 
                 gdbstub_io_tx_char('#');
-                gdbstub_io_tx_char(hexchars[checksum >> 4]);
-                gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+                gdbstub_io_tx_char(hex_asc_hi(checksum));
+                gdbstub_io_tx_char(hex_asc_lo(checksum));
 
         } while (gdbstub_io_rx_char(&ch, 0),
                  ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0),
@@ -822,8 +820,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
         if ((u32) mem & 1 && count >= 1) {
                 if (gdbstub_read_byte(mem, ch) != 0)
                         return 0;
-                *buf++ = hexchars[ch[0] >> 4];
-                *buf++ = hexchars[ch[0] & 0xf];
+                buf = pack_hex_byte(buf, ch[0]);
                 mem++;
                 count--;
         }
@@ -831,10 +828,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
         if ((u32) mem & 3 && count >= 2) {
                 if (gdbstub_read_word(mem, ch) != 0)
                         return 0;
-                *buf++ = hexchars[ch[0] >> 4];
-                *buf++ = hexchars[ch[0] & 0xf];
-                *buf++ = hexchars[ch[1] >> 4];
-                *buf++ = hexchars[ch[1] & 0xf];
+                buf = pack_hex_byte(buf, ch[0]);
+                buf = pack_hex_byte(buf, ch[1]);
                 mem += 2;
                 count -= 2;
         }
@@ -842,14 +837,10 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
         while (count >= 4) {
                 if (gdbstub_read_dword(mem, ch) != 0)
                         return 0;
-                *buf++ = hexchars[ch[0] >> 4];
-                *buf++ = hexchars[ch[0] & 0xf];
-                *buf++ = hexchars[ch[1] >> 4];
-                *buf++ = hexchars[ch[1] & 0xf];
-                *buf++ = hexchars[ch[2] >> 4];
-                *buf++ = hexchars[ch[2] & 0xf];
-                *buf++ = hexchars[ch[3] >> 4];
-                *buf++ = hexchars[ch[3] & 0xf];
+                buf = pack_hex_byte(buf, ch[0]);
+                buf = pack_hex_byte(buf, ch[1]);
+                buf = pack_hex_byte(buf, ch[2]);
+                buf = pack_hex_byte(buf, ch[3]);
                 mem += 4;
                 count -= 4;
         }
@@ -857,10 +848,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
         if (count >= 2) {
                 if (gdbstub_read_word(mem, ch) != 0)
                         return 0;
-                *buf++ = hexchars[ch[0] >> 4];
-                *buf++ = hexchars[ch[0] & 0xf];
-                *buf++ = hexchars[ch[1] >> 4];
-                *buf++ = hexchars[ch[1] & 0xf];
+                buf = pack_hex_byte(buf, ch[0]);
+                buf = pack_hex_byte(buf, ch[1]);
                 mem += 2;
                 count -= 2;
         }
@@ -868,8 +857,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
         if (count >= 1) {
                 if (gdbstub_read_byte(mem, ch) != 0)
                         return 0;
-                *buf++ = hexchars[ch[0] >> 4];
-                *buf++ = hexchars[ch[0] & 0xf];
+                buf = pack_hex_byte(buf, ch[0]);
         }
 
         *buf = 0;
@@ -1304,14 +1292,14 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
                 *ptr++ = 'O';
                 ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
 
-                hx = hexchars[(excep & 0xf000) >> 12];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(excep & 0x0f00) >> 8];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(excep & 0x00f0) >> 4];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(excep & 0x000f)];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+                hx = hex_asc_hi(excep >> 8);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_lo(excep >> 8);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_hi(excep);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_lo(excep);
+                ptr = pack_hex_byte(ptr, hx);
 
                 ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
                 *ptr = 0;
@@ -1322,22 +1310,22 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
                 *ptr++ = 'O';
                 ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
 
-                hx = hexchars[(bcberr & 0xf0000000) >> 28];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(bcberr & 0x0f000000) >> 24];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(bcberr & 0x00f00000) >> 20];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(bcberr & 0x000f0000) >> 16];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(bcberr & 0x0000f000) >> 12];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(bcberr & 0x00000f00) >> 8];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(bcberr & 0x000000f0) >> 4];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
-                hx = hexchars[(bcberr & 0x0000000f)];
-                *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+                hx = hex_asc_hi(bcberr >> 24);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_lo(bcberr >> 24);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_hi(bcberr >> 16);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_lo(bcberr >> 16);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_hi(bcberr >> 8);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_lo(bcberr >> 8);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_hi(bcberr);
+                ptr = pack_hex_byte(ptr, hx);
+                hx = hex_asc_lo(bcberr);
+                ptr = pack_hex_byte(ptr, hx);
 
                 ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
                 *ptr = 0;
@@ -1353,14 +1341,12 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
          * Send trap type (converted to signal)
          */
         *ptr++ = 'T';
-        *ptr++ = hexchars[sigval >> 4];
-        *ptr++ = hexchars[sigval & 0xf];
+        ptr = pack_hex_byte(ptr, sigval);
 
         /*
          * Send Error PC
          */
-        *ptr++ = hexchars[GDB_REGID_PC >> 4];
-        *ptr++ = hexchars[GDB_REGID_PC & 0xf];
+        ptr = pack_hex_byte(ptr, GDB_REGID_PC);
         *ptr++ = ':';
         ptr = mem2hex(&regs->pc, ptr, 4, 0);
         *ptr++ = ';';
@@ -1368,8 +1354,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
         /*
          * Send frame pointer
          */
-        *ptr++ = hexchars[GDB_REGID_FP >> 4];
-        *ptr++ = hexchars[GDB_REGID_FP & 0xf];
+        ptr = pack_hex_byte(ptr, GDB_REGID_FP);
         *ptr++ = ':';
         ptr = mem2hex(&regs->a3, ptr, 4, 0);
         *ptr++ = ';';
@@ -1378,8 +1363,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
          * Send stack pointer
          */
         ssp = (unsigned long) (regs + 1);
-        *ptr++ = hexchars[GDB_REGID_SP >> 4];
-        *ptr++ = hexchars[GDB_REGID_SP & 0xf];
+        ptr = pack_hex_byte(ptr, GDB_REGID_SP);
         *ptr++ = ':';
         ptr = mem2hex(&ssp, ptr, 4, 0);
         *ptr++ = ';';
@@ -1399,8 +1383,8 @@ packet_waiting:
                         /* request repeat of last signal number */
                 case '?':
                         output_buffer[0] = 'S';
-                        output_buffer[1] = hexchars[sigval >> 4];
-                        output_buffer[2] = hexchars[sigval & 0xf];
+                        output_buffer[1] = hex_asc_hi(sigval);
+                        output_buffer[2] = hex_asc_lo(sigval);
                         output_buffer[3] = 0;
                         break;
 
@@ -1838,8 +1822,8 @@ void gdbstub_exit(int status)
 
         gdbstub_busy = 1;
         output_buffer[0] = 'W';
-        output_buffer[1] = hexchars[(status >> 4) & 0x0F];
-        output_buffer[2] = hexchars[status & 0x0F];
+        output_buffer[1] = hex_asc_hi(status);
+        output_buffer[2] = hex_asc_lo(status);
         output_buffer[3] = 0;
 
         gdbstub_io_tx_char('$');
@@ -1853,8 +1837,8 @@ void gdbstub_exit(int status)
         }
 
         gdbstub_io_tx_char('#');
-        gdbstub_io_tx_char(hexchars[checksum >> 4]);
-        gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+        gdbstub_io_tx_char(hex_asc_hi(checksum));
+        gdbstub_io_tx_char(hex_asc_lo(checksum));
 
         /* make sure the output is flushed, or else RedBoot might clobber it */
         gdbstub_io_tx_flush();
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index b9c268c6b2fb..8b054e7a8ae8 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -392,7 +392,7 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
 static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 {
         struct uart_icount *icount = &port->uart.icount;
-        struct tty_struct *tty = port->uart.info->tty;
+        struct tty_struct *tty = port->uart.info->port.tty;
         unsigned ix;
         int count;
         u8 st, ch, push, status, overrun;
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
index 8c5d88c7b90a..8cee387a24fd 100644
--- a/arch/mn10300/mm/init.c
+++ b/arch/mn10300/mm/init.c
@@ -67,8 +67,8 @@ void __init paging_init(void)
 
         /* declare the sizes of the RAM zones (only use the normal zone) */
         zones_size[ZONE_NORMAL] =
-                (contig_page_data.bdata->node_low_pfn) -
-                (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT);
+                contig_page_data.bdata->node_low_pfn -
+                contig_page_data.bdata->node_min_pfn;
 
         /* pass the memory from the bootmem allocator to the main allocator */
         free_area_init(zones_size);
@@ -87,7 +87,7 @@ void __init mem_init(void)
         if (!mem_map)
                 BUG();
 
-#define START_PFN       (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN       (contig_page_data.bdata->node_min_pfn)
 #define MAX_LOW_PFN     (contig_page_data.bdata->node_low_pfn)
 
         max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
index a477038752ba..baffc581e031 100644
--- a/arch/mn10300/mm/pgtable.c
+++ b/arch/mn10300/mm/pgtable.c
@@ -27,33 +27,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-        unsigned long i;
-        int free = 0, total = 0, reserved = 0, shared = 0;
-
-        int cached = 0;
-        printk(KERN_INFO "Mem-info:\n");
-        show_free_areas();
-        i = max_mapnr;
-        while (i-- > 0) {
-                total++;
-                if (PageReserved(mem_map + i))
-                        reserved++;
-                else if (PageSwapCache(mem_map + i))
-                        cached++;
-                else if (!page_count(mem_map + i))
-                        free++;
-                else
-                        shared += page_count(mem_map + i) - 1;
-        }
-        printk(KERN_INFO "%d pages of RAM\n", total);
-        printk(KERN_INFO "%d free pages\n", free);
-        printk(KERN_INFO "%d reserved pages\n", reserved);
-        printk(KERN_INFO "%d pages shared\n", shared);
-        printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * Associate a large virtual page frame with a given physical page frame
  * and protection flags for that frame. pfn is for the base of the page,
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index 0c5b9dabb475..18072e03a019 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -210,19 +210,19 @@ static int vfs_statfs_hpux(struct dentry *dentry, struct hpux_statfs *buf)
 }
 
 /* hpux statfs */
-asmlinkage long hpux_statfs(const char __user *path,
+asmlinkage long hpux_statfs(const char __user *pathname,
                                                 struct hpux_statfs __user *buf)
 {
-        struct nameidata nd;
+        struct path path;
         int error;
 
-        error = user_path_walk(path, &nd);
+        error = user_path(pathname, &path);
         if (!error) {
                 struct hpux_statfs tmp;
-                error = vfs_statfs_hpux(nd.path.dentry, &tmp);
+                error = vfs_statfs_hpux(path.dentry, &tmp);
                 if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
                         error = -EFAULT;
-                path_put(&nd.path);
+                path_put(&path);
         }
         return error;
 }
@@ -448,7 +448,7 @@ int hpux_pipe(int *kstack_fildes)
         int error;
 
         lock_kernel();
-        error = do_pipe(kstack_fildes);
+        error = do_pipe_flags(kstack_fildes, 0);
         unlock_kernel();
         return error;
 }
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index b4d6c8777ed0..7c155c254e72 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -36,7 +36,6 @@ extern int  data_start;
 
 #ifdef CONFIG_DISCONTIGMEM
 struct node_map_data node_data[MAX_NUMNODES] __read_mostly;
-bootmem_data_t bmem_data[MAX_NUMNODES] __read_mostly;
 unsigned char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
 #endif
 
@@ -262,7 +261,7 @@ static void __init setup_bootmem(void)
 #ifdef CONFIG_DISCONTIGMEM
         for (i = 0; i < MAX_PHYSMEM_RANGES; i++) {
                 memset(NODE_DATA(i), 0, sizeof(pg_data_t));
-                NODE_DATA(i)->bdata = &bmem_data[i];
+                NODE_DATA(i)->bdata = &bootmem_node_data[i];
         }
         memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
 
@@ -888,7 +887,7 @@ void __init paging_init(void)
                 }
 #endif
 
-                free_area_init_node(i, NODE_DATA(i), zones_size,
+                free_area_init_node(i, zones_size,
                                 pmem_ranges[i].start_pfn, NULL);
         }
 }
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index de88972c5896..587da5e0990f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -110,9 +110,14 @@ config PPC
         default y
         select HAVE_DYNAMIC_FTRACE
         select HAVE_FTRACE
+        select ARCH_WANT_OPTIONAL_GPIOLIB
         select HAVE_IDE
+        select HAVE_IOREMAP_PROT
+        select HAVE_EFFICIENT_UNALIGNED_ACCESS
         select HAVE_KPROBES
+        select HAVE_ARCH_KGDB
         select HAVE_KRETPROBES
+        select HAVE_ARCH_TRACEHOOK
         select HAVE_LMB
         select HAVE_DMA_ATTRS if PPC64
         select USE_GENERIC_SMP_HELPERS if SMP
@@ -199,7 +204,7 @@ config ARCH_HIBERNATION_POSSIBLE
 
 config ARCH_SUSPEND_POSSIBLE
         def_bool y
-        depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200
+        depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
 
 config PPC_DCR_NATIVE
         bool
@@ -568,11 +573,15 @@ config FSL_GTM
 config MCA
         bool
 
+# Platforms that what PCI turned unconditionally just do select PCI
+# in their config node.  Platforms that want to choose at config
+# time should select PPC_PCI_CHOICE
+config PPC_PCI_CHOICE
+        bool
+
 config PCI
-        bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
-                || PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
-                || PPC_PS3 || 44x
-        default y if !40x && !CPM2 && !8xx && !PPC_MPC512x && !PPC_83xx \
+        bool "PCI support" if PPC_PCI_CHOICE
+        default y if !40x && !CPM2 && !8xx && !PPC_83xx \
                 && !PPC_85xx && !PPC_86xx
         default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
         default PCI_QSPAN if !4xx && !CPM2 && 8xx
@@ -838,6 +847,7 @@ source "crypto/Kconfig"
 config PPC_CLOCK
         bool
         default n
+        select HAVE_CLK
 
 config PPC_LIB_RHEAP
         bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 2840ab69ef4e..8c8aadbe9563 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -41,22 +41,6 @@ config HCALL_STATS
           This option will add a small amount of overhead to all hypervisor
           calls.
 
-config DEBUGGER
-        bool "Enable debugger hooks"
-        depends on DEBUG_KERNEL
-        help
-          Include in-kernel hooks for kernel debuggers. Unless you are
-          intending to debug the kernel, say N here.
-
-config KGDB
-        bool "Include kgdb kernel debugger"
-        depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
-        select DEBUG_INFO
-        help
-          Include in-kernel hooks for kgdb, the Linux kernel source level
-          debugger.  See <http://kgdb.sourceforge.net/> for more information.
-          Unless you are intending to debug the kernel, say N here.
-
 config CODE_PATCHING_SELFTEST
         bool "Run self-tests of the code-patching code."
         depends on DEBUG_KERNEL
@@ -67,36 +51,9 @@ config FTR_FIXUP_SELFTEST
         depends on DEBUG_KERNEL
         default n
 
-choice
-        prompt "Serial Port"
-        depends on KGDB
-        default KGDB_TTYS1
-
-config KGDB_TTYS0
-        bool "ttyS0"
-
-config KGDB_TTYS1
-        bool "ttyS1"
-
-config KGDB_TTYS2
-        bool "ttyS2"
-
-config KGDB_TTYS3
-        bool "ttyS3"
-
-endchoice
-
-config KGDB_CONSOLE
-        bool "Enable serial console thru kgdb port"
-        depends on KGDB && 8xx || CPM2
-        help
-          If you enable this, all serial console messages will be sent
-          over the gdb stub.
-          If unsure, say N.
-
 config XMON
         bool "Include xmon kernel debugger"
-        depends on DEBUGGER
+        depends on DEBUG_KERNEL
         help
           Include in-kernel hooks for the xmon kernel monitor/debugger.
           Unless you are intending to debug the kernel, say N here.
@@ -126,6 +83,11 @@ config XMON_DISASSEMBLY
           to say Y here, unless you're building for a memory-constrained
           system.
 
+config DEBUGGER
+        bool
+        depends on KGDB || XMON
+        default y
+
 config IRQSTACKS
         bool "Use separate kernel stacks when processing interrupts"
         help
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 19f83c8f219d..14174aa24074 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -163,12 +163,12 @@ quiet_cmd_flex = FLEX    $@
       cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
 
 $(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
-     $(call if_changed,bison)
+        $(call if_changed,bison)
 
 $(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
 
 $(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
-     $(call if_changed,flex)
+        $(call if_changed,flex)
 endif
 
 #############
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 705c23c14f32..2544f3ecd6e9 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -18,6 +18,16 @@
         #address-cells = <1>;
         #size-cells = <1>;
 
+        aliases {
+                ethernet0 = &enet0;
+                ethernet1 = &enet1;
+
+                serial0 = &serial0;
+                serial1 = &serial1;
+
+                pci0 = &pci0;
+        };
+
         cpus {
                 #address-cells = <1>;
                 #size-cells =<0>;
@@ -78,7 +88,7 @@
 
                 };
 
-                ethernet@6200 {
+                enet0: ethernet@6200 {
                         linux,network-index = <0>;
                         #size-cells = <0>;
                         device_type = "network";
@@ -91,7 +101,7 @@
                         phy-handle = <&phy8>;
                 };
 
-                ethernet@6600 {
+                enet1: ethernet@6600 {
                         linux,network-index = <1>;
                         #address-cells = <1>;
                         #size-cells = <0>;
@@ -105,7 +115,7 @@
                         phy-handle = <&phy9>;
                 };
 
-                serial@7808 {
+                serial0: serial@7808 {
                         device_type = "serial";
                         compatible = "ns16550";
                         reg = <0x7808 0x200>;
@@ -114,7 +124,7 @@
                         interrupt-parent = <&mpic>;
                 };
 
-                serial@7c08 {
+                serial1: serial@7c08 {
                         device_type = "serial";
                         compatible = "ns16550";
                         reg = <0x7c08 0x200>;
@@ -131,7 +141,7 @@
                         compatible = "chrp,open-pic";
                         device_type = "open-pic";
                 };
-                pci@1000 {
+                pci0: pci@1000 {
                         compatible = "tsi108-pci";
                         device_type = "pci";
                         #interrupt-cells = <1>;
@@ -184,8 +194,4 @@
                         };
                 };
         };
-        chosen {
-                linux,stdout-path = "/tsi108@c0000000/serial@7808";
-        };
-
 };
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 3664fb584026..2a94ae0dc8b8 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -109,18 +109,38 @@
                         reg = <0x200 0x100>;
                 };
 
-                i2c@3000 {
+                sleep-nexus {
                         #address-cells = <1>;
-                        #size-cells = <0>;
-                        cell-index = <0>;
-                        compatible = "fsl-i2c";
-                        reg = <0x3000 0x100>;
-                        interrupts = <14 0x8>;
-                        interrupt-parent = <&ipic>;
-                        dfsrr;
-                        rtc@68 {
-                                compatible = "dallas,ds1339";
-                                reg = <0x68>;
+                        #size-cells = <1>;
+                        compatible = "simple-bus";
+                        sleep = <&pmc 0x03000000>;
+                        ranges;
+
+                        i2c@3000 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                cell-index = <0>;
+                                compatible = "fsl-i2c";
+                                reg = <0x3000 0x100>;
+                                interrupts = <14 0x8>;
+                                interrupt-parent = <&ipic>;
+                                dfsrr;
+                                rtc@68 {
+                                        compatible = "dallas,ds1339";
+                                        reg = <0x68>;
+                                };
+                        };
+
+                        crypto@30000 {
+                                compatible = "fsl,sec2.2", "fsl,sec2.1",
+                                             "fsl,sec2.0";
+                                reg = <0x30000 0x10000>;
+                                interrupts = <11 0x8>;
+                                interrupt-parent = <&ipic>;
+                                fsl,num-channels = <1>;
+                                fsl,channel-fifo-len = <24>;
+                                fsl,exec-units-mask = <0x4c>;
+                                fsl,descriptor-types-mask = <0x0122003f>;
                         };
                 };
 
@@ -188,37 +208,44 @@
                         interrupt-parent = <&ipic>;
                         interrupts = <38 0x8>;
                         phy_type = "utmi_wide";
+                        sleep = <&pmc 0x00300000>;
                 };
 
-                mdio@24520 {
+                enet0: ethernet@24000 {
                         #address-cells = <1>;
-                        #size-cells = <0>;
-                        compatible = "fsl,gianfar-mdio";
-                        reg = <0x24520 0x20>;
-                        phy1: ethernet-phy@1 {
-                                interrupt-parent = <&ipic>;
-                                interrupts = <19 0x8>;
-                                reg = <0x1>;
-                                device_type = "ethernet-phy";
-                        };
-                        phy4: ethernet-phy@4 {
-                                interrupt-parent = <&ipic>;
-                                interrupts = <20 0x8>;
-                                reg = <0x4>;
-                                device_type = "ethernet-phy";
-                        };
-                };
+                        #size-cells = <1>;
+                        sleep = <&pmc 0x20000000>;
+                        ranges;
 
-                enet0: ethernet@24000 {
                         cell-index = <0>;
                         device_type = "network";
                         model = "eTSEC";
-                        compatible = "gianfar";
+                        compatible = "gianfar", "simple-bus";
                         reg = <0x24000 0x1000>;
                         local-mac-address = [ 00 00 00 00 00 00 ];
                         interrupts = <37 0x8 36 0x8 35 0x8>;
                         interrupt-parent = <&ipic>;
                         phy-handle = < &phy1 >;
+                        fsl,magic-packet;
+
+                        mdio@24520 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                compatible = "fsl,gianfar-mdio";
+                                reg = <0x24520 0x20>;
+                                phy1: ethernet-phy@1 {
+                                        interrupt-parent = <&ipic>;
+                                        interrupts = <19 0x8>;
+                                        reg = <0x1>;
+                                        device_type = "ethernet-phy";
+                                };
+                                phy4: ethernet-phy@4 {
+                                        interrupt-parent = <&ipic>;
+                                        interrupts = <20 0x8>;
+                                        reg = <0x4>;
+                                        device_type = "ethernet-phy";
+                                };
+                        };
                 };
 
                 enet1: ethernet@25000 {
@@ -231,6 +258,8 @@
                         interrupts = <34 0x8 33 0x8 32 0x8>;
                         interrupt-parent = <&ipic>;
                         phy-handle = < &phy4 >;
+                        sleep = <&pmc 0x10000000>;
+                        fsl,magic-packet;
                 };
 
                 serial0: serial@4500 {
@@ -253,17 +282,6 @@
                         interrupt-parent = <&ipic>;
                 };
 
-                crypto@30000 {
-                        compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-                        reg = <0x30000 0x10000>;
-                        interrupts = <11 0x8>;
-                        interrupt-parent = <&ipic>;
-                        fsl,num-channels = <1>;
-                        fsl,channel-fifo-len = <24>;
-                        fsl,exec-units-mask = <0x4c>;
-                        fsl,descriptor-types-mask = <0x0122003f>;
-                };
-
                 /* IPIC
                  * interrupts cell = <intr #, sense>
                  * sense values match linux IORESOURCE_IRQ_* defines:
@@ -277,36 +295,119 @@
                         reg = <0x700 0x100>;
                         device_type = "ipic";
                 };
+
+                pmc: power@b00 {
+                        compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+                        reg = <0xb00 0x100 0xa00 0x100>;
+                        interrupts = <80 8>;
+                        interrupt-parent = <&ipic>;
+                        fsl,mpc8313-wakeup-timer = <&gtm1>;
+
+                        /* Remove this (or change to "okay") if you have
+                         * a REVA3 or later board, if you apply one of the
+                         * workarounds listed in section 8.5 of the board
+                         * manual, or if you are adapting this device tree
+                         * to a different board.
+                         */
+                        status = "fail";
+                };
+
+                gtm1: timer@500 {
+                        compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+                        reg = <0x500 0x100>;
+                        interrupts = <90 8 78 8 84 8 72 8>;
+                        interrupt-parent = <&ipic>;
+                };
+
+                timer@600 {
+                        compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+                        reg = <0x600 0x100>;
+                        interrupts = <91 8 79 8 85 8 73 8>;
+                        interrupt-parent = <&ipic>;
+                };
         };
 
-        pci0: pci@e0008500 {
-                cell-index = <1>;
-                interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-                interrupt-map = <
-
-                                /* IDSEL 0x0E -mini PCI */
-                                 0x7000 0x0 0x0 0x1 &ipic 18 0x8
-                                 0x7000 0x0 0x0 0x2 &ipic 18 0x8
-                                 0x7000 0x0 0x0 0x3 &ipic 18 0x8
-                                 0x7000 0x0 0x0 0x4 &ipic 18 0x8
-
-                                /* IDSEL 0x0F - PCI slot */
-                                 0x7800 0x0 0x0 0x1 &ipic 17 0x8
-                                 0x7800 0x0 0x0 0x2 &ipic 18 0x8
-                                 0x7800 0x0 0x0 0x3 &ipic 17 0x8
-                                 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
-                interrupt-parent = <&ipic>;
-                interrupts = <66 0x8>;
-                bus-range = <0x0 0x0>;
-                ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-                          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-                          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-                clock-frequency = <66666666>;
-                #interrupt-cells = <1>;
-                #size-cells = <2>;
-                #address-cells = <3>;
-                reg = <0xe0008500 0x100>;
-                compatible = "fsl,mpc8349-pci";
-                device_type = "pci";
+        sleep-nexus {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "simple-bus";
+                sleep = <&pmc 0x00010000>;
+                ranges;
+
+                pci0: pci@e0008500 {
+                        cell-index = <1>;
+                        interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                        interrupt-map = <
+                                        /* IDSEL 0x0E -mini PCI */
+                                         0x7000 0x0 0x0 0x1 &ipic 18 0x8
+                                         0x7000 0x0 0x0 0x2 &ipic 18 0x8
+                                         0x7000 0x0 0x0 0x3 &ipic 18 0x8
+                                         0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+                                        /* IDSEL 0x0F - PCI slot */
+                                         0x7800 0x0 0x0 0x1 &ipic 17 0x8
+                                         0x7800 0x0 0x0 0x2 &ipic 18 0x8
+                                         0x7800 0x0 0x0 0x3 &ipic 17 0x8
+                                         0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+                        interrupt-parent = <&ipic>;
+                        interrupts = <66 0x8>;
+                        bus-range = <0x0 0x0>;
+                        ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+                                  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+                                  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+                        clock-frequency = <66666666>;
+                        #interrupt-cells = <1>;
+                        #size-cells = <2>;
+                        #address-cells = <3>;
+                        reg = <0xe0008500 0x100>;
+                        compatible = "fsl,mpc8349-pci";
+                        device_type = "pci";
+                };
+
+                dma@82a8 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+                        reg = <0xe00082a8 4>;
+                        ranges = <0 0xe0008100 0x1a8>;
+                        interrupt-parent = <&ipic>;
+                        interrupts = <71 8>;
+
+                        dma-channel@0 {
+                                compatible = "fsl,mpc8313-dma-channel",
+                                             "fsl,elo-dma-channel";
+                                reg = <0 0x28>;
+                                interrupt-parent = <&ipic>;
+                                interrupts = <71 8>;
+                                cell-index = <0>;
+                        };
+
+                        dma-channel@80 {
+                                compatible = "fsl,mpc8313-dma-channel",
+                                             "fsl,elo-dma-channel";
+                                reg = <0x80 0x28>;
+                                interrupt-parent = <&ipic>;
+                                interrupts = <71 8>;
+                                cell-index = <1>;
+                        };
+
+                        dma-channel@100 {
+                                compatible = "fsl,mpc8313-dma-channel",
+                                             "fsl,elo-dma-channel";
+                                reg = <0x100 0x28>;
+                                interrupt-parent = <&ipic>;
+                                interrupts = <71 8>;
+                                cell-index = <2>;
+                        };
+
+                        dma-channel@180 {
+                                compatible = "fsl,mpc8313-dma-channel",
+                                             "fsl,elo-dma-channel";
+                                reg = <0x180 0x28>;
+                                interrupt-parent = <&ipic>;
+                                interrupts = <71 8>;
+                                cell-index = <3>;
+                        };
+                };
         };
 };
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 981941e5d7a5..666185f59459 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -388,6 +388,20 @@
                                           0x01000000 0x0 0x00000000
                                           0x01000000 0x0 0x00000000
                                           0x0 0x00100000>;
+
+                                isa@1e {
+                                        device_type = "isa";
+                                        #size-cells = <1>;
+                                        #address-cells = <2>;
+                                        reg = <0xf000 0 0 0 0>;
+                                        ranges = <1 0 0x01000000 0 0
+                                                  0x00001000>;
+
+                                        rtc@70 {
+                                                compatible = "pnpPNP,b00";
+                                                reg = <1 0x70 2>;
+                                        };
+                                };
                         };
                 };
         };
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index 042a85ea7b72..a0583e5119f5 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -997,10 +997,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 03627cfebcb4..164fd9606ee6 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -997,10 +997,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 3efab71a603b..fa0170504b88 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1005,10 +1005,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 5612d40d0463..cdf98ae3682b 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:50:24 2008
+# Linux kernel version: 2.6.26
+# Tue Jul 15 08:31:01 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -51,6 +51,8 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -97,6 +99,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -117,7 +120,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -153,31 +156,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
 # CONFIG_PPC_MPC512x is not set
 # CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 CONFIG_MPC8610_HPCD=y
 CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
+CONFIG_FSL_ULI1575=y
 
 #
 # Kernel options
@@ -202,6 +217,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -228,11 +244,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -469,6 +487,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -571,6 +590,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
@@ -639,6 +660,10 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -655,6 +680,8 @@ CONFIG_DUMMY=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -762,14 +789,16 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -787,9 +816,11 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_POWERMAC=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
@@ -826,6 +857,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -888,6 +920,9 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_OF is not set
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
 # CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
@@ -1027,12 +1062,19 @@ CONFIG_SND_VERBOSE_PROCFS=y
 #
 # ALSA PowerMac devices
 #
+# CONFIG_SND_POWERMAC is not set
 
 #
 # ALSA PowerPC devices
 #
 
 #
+# Apple Onboard Audio driver
+#
+# CONFIG_SND_AOA is not set
+# CONFIG_SND_AOA_SOUNDBUS is not set
+
+#
 # System on Chip audio support
 #
 CONFIG_SND_SOC=y
@@ -1075,7 +1117,57 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -1295,8 +1387,11 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 4a8171507391..867b8c0215f3 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -991,10 +991,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
new file mode 100644
index 000000000000..e6e91c85da31
--- /dev/null
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -0,0 +1,3304 @@
+# powerpc
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-git2
+# Tue Jul 15 23:54:18 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_LSF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_INTEGRITY=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_PPC_MPC52xx=y
+# CONFIG_PPC_MPC5200_SIMPLE is not set
+CONFIG_PPC_EFIKA=y
+# CONFIG_PPC_LITE5200 is not set
+CONFIG_PPC_MPC5200_BUGFIX=y
+CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_PPC_PMAC=y
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
+CONFIG_MPC8272_ADS=y
+CONFIG_PQ2FADS=y
+CONFIG_EP8248E=y
+CONFIG_PQ2ADS=y
+CONFIG_8260=y
+CONFIG_8272=y
+CONFIG_PQ2_ADS_PCI_PIC=y
+CONFIG_PPC_83xx=y
+CONFIG_MPC831x_RDB=y
+CONFIG_MPC832x_MDS=y
+CONFIG_MPC832x_RDB=y
+CONFIG_MPC834x_MDS=y
+CONFIG_MPC834x_ITX=y
+CONFIG_MPC836x_MDS=y
+CONFIG_MPC836x_RDK=y
+CONFIG_MPC837x_MDS=y
+CONFIG_MPC837x_RDB=y
+CONFIG_SBC834x=y
+CONFIG_ASP834x=y
+CONFIG_PPC_MPC831x=y
+CONFIG_PPC_MPC832x=y
+CONFIG_PPC_MPC834x=y
+CONFIG_PPC_MPC837x=y
+CONFIG_PPC_86xx=y
+CONFIG_MPC8641_HPCN=y
+CONFIG_SBC8641D=y
+CONFIG_MPC8610_HPCD=y
+CONFIG_MPC8641=y
+CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_IPIC=y
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# CPU Frequency drivers
+#
+CONFIG_CPU_FREQ_PMAC=y
+# CONFIG_PPC601_SYNC_FIX is not set
+CONFIG_TAU=y
+# CONFIG_TAU_INT is not set
+CONFIG_TAU_AVERAGE=y
+CONFIG_QUICC_ENGINE=y
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+CONFIG_FSL_ULI1575=y
+CONFIG_CPM=y
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=m
+CONFIG_PPC_BESTCOMM_FEC=m
+CONFIG_PPC_BESTCOMM_GEN_BD=m
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_APM_EMULATION=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+CONFIG_ADVANCED_OPTIONS=y
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
+# CONFIG_PAGE_OFFSET_BOOL is not set
+CONFIG_PAGE_OFFSET=0xc0000000
+# CONFIG_KERNEL_START_BOOL is not set
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_NET_DCCPPROBE=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+# CONFIG_ATM_MPOA is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_DECNET=m
+CONFIG_DECNET_ROUTER=y
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_QOS=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_IEEE80211=m
+CONFIG_IEEE80211_DEBUG=y
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_PC_PCMCIA is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPACPI is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+CONFIG_MAC_FLOPPY=m
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_VIRTIO_BLK=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
+CONFIG_BLK_DEV_IDEDMA_PMAC=y
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_BLK_DEV_HD_ONLY=y
+CONFIG_BLK_DEV_HD=y
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_MESH=m
+CONFIG_SCSI_MESH_SYNC_RATE=5
+CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
+CONFIG_SCSI_MAC53C94=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=m
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+CONFIG_ATA_PIIX=m
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+CONFIG_PDC_ADMA=m
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+CONFIG_ATA_GENERIC=m
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+CONFIG_PATA_MPC52xx=m
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+CONFIG_PATA_OPTIDMA=m
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+CONFIG_PATA_VIA=m
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+CONFIG_PATA_PLATFORM=m
+CONFIG_PATA_OF_PLATFORM=m
+CONFIG_PATA_SCH=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_DEBUG=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_ADB_PMU_LED=y
+CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_PMAC_APM_EMU=y
+CONFIG_PMAC_MEDIABAY=y
+CONFIG_PMAC_BACKLIGHT=y
+# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
+CONFIG_ADB_MACIO=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_THERM_WINDTUNNEL=m
+CONFIG_THERM_ADT746X=m
+CONFIG_WINDFARM=y
+# CONFIG_ANSLCD is not set
+CONFIG_PMAC_RACKMETER=m
+CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_IFB=m
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NET_SB1000=m
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MACE=m
+# CONFIG_MACE_AAUI_PORT is not set
+CONFIG_BMAC=m
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+# CONFIG_WD80x3 is not set
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+CONFIG_AMD8111_ETH=m
+CONFIG_AMD8111E_NAPI=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_ADAPTEC_STARFIRE_NAPI=y
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_FORCEDETH=m
+CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=m
+CONFIG_FEALNX=m
+CONFIG_NATSEMI=m
+CONFIG_NE2K_PCI=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R6040=m
+CONFIG_SIS900=m
+CONFIG_EPIC100=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_TLAN=m
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_RHINE_NAPI=y
+CONFIG_SC92031=m
+CONFIG_NET_POCKET=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_FEC_MPC52xx=m
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_FS_ENET is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_DL2K=m
+CONFIG_E1000=m
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+CONFIG_E1000E=m
+CONFIG_E1000E_ENABLED=y
+CONFIG_IP1000=m
+CONFIG_IGB=m
+CONFIG_NS83820=m
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_R8169=m
+CONFIG_R8169_NAPI=y
+CONFIG_R8169_VLAN=y
+CONFIG_SIS190=m
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_VIA_VELOCITY=m
+CONFIG_TIGON3=m
+CONFIG_BNX2=m
+CONFIG_GIANFAR=m
+CONFIG_GFAR_NAPI=y
+# CONFIG_UCC_GETH is not set
+CONFIG_MV643XX_ETH=m
+CONFIG_QLA3XXX=m
+CONFIG_ATL1=m
+CONFIG_NETDEV_10000=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T1_NAPI=y
+CONFIG_CHELSIO_T3=m
+CONFIG_IXGBE=m
+CONFIG_IXGB=m
+CONFIG_IXGB_NAPI=y
+CONFIG_S2IO=m
+CONFIG_S2IO_NAPI=y
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NIU=m
+# CONFIG_MLX4_CORE is not set
+CONFIG_TEHUTI=m
+CONFIG_BNX2X=m
+CONFIG_SFC=m
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+CONFIG_ATM_FORE200E_MAYBE=m
+# CONFIG_ATM_FORE200E_PCA is not set
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_FDDI=y
+# CONFIG_DEFXX is not set
+CONFIG_SKFP=m
+# CONFIG_HIPPI is not set
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_NET_FC=y
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+CONFIG_INPUT_LIRC=y
+CONFIG_LIRC_DEV=m
+CONFIG_LIRC_ATIUSB=m
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_CMDIR=m
+CONFIG_LIRC_I2C=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_IT87=m
+CONFIG_LIRC_MCEUSB=m
+CONFIG_LIRC_MCEUSB2=m
+CONFIG_LIRC_PVR150=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_STREAMZAP=m
+CONFIG_LIRC_TTUSBIR=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_ESPSERIAL is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+CONFIG_NOZOMI=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_PMACZILOG_TTYS is not set
+# CONFIG_SERIAL_CPM is not set
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_QE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_CRASH is not set
+CONFIG_BRIQ_PANEL=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+# CONFIG_HVC_RTAS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
+CONFIG_R3964=m
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_HYDRA=m
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=m
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=m
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+CONFIG_I2C_VOODOO3=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_PCF8575=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_MATROX is not set
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+CONFIG_APM_POWER=m
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_PMU=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7473=m
+CONFIG_SENSORS_AMS=m
+CONFIG_SENSORS_AMS_PMU=y
+CONFIG_SENSORS_AMS_I2C=y
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_I5K_AMB is not set
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_MPC5200_WDT is not set
+CONFIG_83xx_WDT=m
+CONFIG_WATCHDOG_RTAS=m
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=m
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR_I2C=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA7111=m
+CONFIG_VIDEO_SAA7114=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_SAA6588=m
+# CONFIG_VIDEO_PMS is not set
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+# CONFIG_MT9M001_PCA9536_SWITCH is not set
+CONFIG_SOC_CAMERA_MT9V022=m
+# CONFIG_MT9V022_PCA9536_SWITCH is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+CONFIG_RADIO_GEMTEK_PCI=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_CINERGYT2=m
+CONFIG_DVB_CINERGYT2_TUNING=y
+CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
+CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
+CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
+CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
+CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=y
+CONFIG_AGP_UNINORTH=y
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_VGASTATE=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SVGALIB=m
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+CONFIG_FB_PLATINUM=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_CT65550=y
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+# CONFIG_FB_RIVA_I2C is not set
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_MATROX_MULTIHEAD=y
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=y
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+# CONFIG_FB_SIS is not set
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+CONFIG_FB_3DFX_ACCEL=y
+CONFIG_FB_VOODOO1=m
+# CONFIG_FB_VT8623 is not set
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_TRIDENT_ACCEL=y
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+CONFIG_FB_SM501=m
+CONFIG_FB_IBM_GXT4500=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+CONFIG_SND_VMASTER=y
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_SC6000 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_FM801_TEA575X=m
+# CONFIG_SND_HDA_INTEL is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_HIFIER=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+CONFIG_SND_KORG1212=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_CS is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+# CONFIG_USB_TEST is not set
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_FM3130=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+CONFIG_AUXDISPLAY=y
+CONFIG_KS0108=m
+CONFIG_KS0108_PORT=0x378
+CONFIG_KS0108_DELAY=2
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_SMX=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4DEV_FS=m
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+CONFIG_JBD2_DEBUG=y
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_HPFS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_DLM_DEBUG=y
+CONFIG_QE_GPIO=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_HIGHMEM=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_FRAME_POINTER=y
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+CONFIG_FAULT_INJECTION=y
+CONFIG_FAILSLAB=y
+CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAIL_MAKE_REQUEST=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
+CONFIG_LATENCYTOP=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+CONFIG_FTRACE=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_KGDB_CONSOLE is not set
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_CRYPTO_DEV_TALITOS=m
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 71d79e428d20..f9a3d3b394cf 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Mon Apr 28 12:39:10 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 16 13:59:24 2008
 #
 CONFIG_PPC64=y
 
@@ -14,8 +14,9 @@ CONFIG_POWER4=y
 CONFIG_TUNE_CELL=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+# CONFIG_VSX is not set
 CONFIG_PPC_STD_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -90,6 +92,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,15 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -132,6 +138,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -152,13 +159,8 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -187,6 +189,7 @@ CONFIG_PPC_CELL=y
 # Cell Broadband Engine options
 #
 CONFIG_SPU_FS=y
+CONFIG_SPU_FS_64K_LS=y
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
 # CONFIG_IPIC is not set
@@ -222,6 +225,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -248,18 +252,22 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_ARCH_MEMORY_PROBE=y
-# CONFIG_PPC_HAS_HASH_64K is not set
+CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
@@ -273,6 +281,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
@@ -412,6 +421,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -478,6 +489,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
@@ -533,8 +545,18 @@ CONFIG_USB_NET_MCS7830=m
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
 # CONFIG_WAN is not set
-# CONFIG_PPP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -603,6 +625,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -618,23 +641,17 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -652,8 +669,17 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -671,8 +697,8 @@ CONFIG_FB=y
 CONFIG_FB_SYS_FILLRECT=y
 CONFIG_FB_SYS_COPYAREA=y
 CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -712,18 +738,12 @@ CONFIG_FB_LOGO_EXTRA=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -732,53 +752,20 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerMac requires I2C
-#
-
-#
-# ALSA PowerPC devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PPC=y
 CONFIG_SND_PS3=m
 CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
+CONFIG_HIDRAW=y
 
 #
 # USB Input Devices
@@ -807,17 +794,20 @@ CONFIG_USB=m
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -831,6 +821,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -890,12 +881,45 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -911,6 +935,7 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -959,8 +984,8 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1059,12 +1084,15 @@ CONFIG_NLS_ISO8859_1=y
 #
 CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
@@ -1082,7 +1110,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1090,33 +1118,49 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
 # CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_LOCKDEP=y
+CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_WRITECOUNT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1172,6 +1216,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index bf0b1fd0ec34..1a4094704b1f 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -74,6 +74,7 @@ obj-y				+= time.o prom.o traps.o setup-common.o \
                                    misc_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC32)             += entry_32.o setup_32.o
 obj-$(CONFIG_PPC64)             += dma_64.o iommu.o
+obj-$(CONFIG_KGDB)              += kgdb.o
 obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
 obj-$(CONFIG_MODULES)           += ppc_ksyms.o
 obj-$(CONFIG_BOOTX_TEXT)        += btext.o
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index f7f3c215d06f..25c273c761d1 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -23,6 +23,9 @@
 struct cpu_spec* cur_cpu_spec = NULL;
 EXPORT_SYMBOL(cur_cpu_spec);
 
+/* The platform string corresponding to the real PVR */
+const char *powerpc_base_platform;
+
 /* NOTE:
  * Unlike ppc32, ppc64 will only call this once for the boot CPU, it's
  * the responsibility of the appropriate CPU save/restore functions to
@@ -355,6 +358,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
                 .icache_bsize           = 128,
                 .dcache_bsize           = 128,
                 .machine_check          = machine_check_generic,
+                .oprofile_cpu_type      = "ppc64/compat-power5+",
                 .platform               = "power5+",
         },
         {       /* Power6 */
@@ -386,6 +390,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
                 .icache_bsize           = 128,
                 .dcache_bsize           = 128,
                 .machine_check          = machine_check_generic,
+                .oprofile_cpu_type      = "ppc64/compat-power6",
                 .platform               = "power6",
         },
         {       /* 2.06-compliant processor, i.e. Power7 "architected" mode */
@@ -397,6 +402,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
                 .icache_bsize           = 128,
                 .dcache_bsize           = 128,
                 .machine_check          = machine_check_generic,
+                .oprofile_cpu_type      = "ppc64/compat-power7",
                 .platform               = "power7",
         },
         {       /* Power7 */
@@ -1629,9 +1635,34 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
                                 t->cpu_setup = s->cpu_setup;
                                 t->cpu_restore = s->cpu_restore;
                                 t->platform = s->platform;
+                                /*
+                                 * If we have passed through this logic once
+                                 * before and have pulled the default case
+                                 * because the real PVR was not found inside
+                                 * cpu_specs[], then we are possibly running in
+                                 * compatibility mode. In that case, let the
+                                 * oprofiler know which set of compatibility
+                                 * counters to pull from by making sure the
+                                 * oprofile_cpu_type string is set to that of
+                                 * compatibility mode. If the oprofile_cpu_type
+                                 * already has a value, then we are possibly
+                                 * overriding a real PVR with a logical one, and,
+                                 * in that case, keep the current value for
+                                 * oprofile_cpu_type.
+                                 */
+                                if (t->oprofile_cpu_type == NULL)
+                                        t->oprofile_cpu_type = s->oprofile_cpu_type;
                         } else
                                 *t = *s;
                         *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
+
+                        /*
+                         * Set the base platform string once; assumes
+                         * we're called with real pvr first.
+                         */
+                        if (*PTRRELOC(&powerpc_base_platform) == NULL)
+                                *PTRRELOC(&powerpc_base_platform) = t->platform;
+
 #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
                         /* ppc64 and booke expect identify_cpu to also call
                          * setup_cpu for that processor. I will consolidate
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index da52269aec1e..1cbbf7033641 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -343,7 +343,12 @@ syscall_dotrace:
         stw     r0,_TRAP(r1)
         addi    r3,r1,STACK_FRAME_OVERHEAD
         bl      do_syscall_trace_enter
-        lwz     r0,GPR0(r1)     /* Restore original registers */
+        /*
+         * Restore argument registers possibly just changed.
+         * We use the return value of do_syscall_trace_enter
+         * for call number to look up in the table (r0).
+         */
+        mr      r0,r3
         lwz     r3,GPR3(r1)
         lwz     r4,GPR4(r1)
         lwz     r5,GPR5(r1)
@@ -1055,8 +1060,8 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
         SAVE_NVGPRS(r1)
         rlwinm  r3,r3,0,0,30
         stw     r3,_TRAP(r1)
-2:      li      r3,0
-        addi    r4,r1,STACK_FRAME_OVERHEAD
+2:      addi    r3,r1,STACK_FRAME_OVERHEAD
+        mr      r4,r9
         bl      do_signal
         REST_NVGPRS(r1)
         b       recheck
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d7369243ae44..2d802e97097c 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -214,7 +214,12 @@ syscall_dotrace:
         bl      .save_nvgprs
         addi    r3,r1,STACK_FRAME_OVERHEAD
         bl      .do_syscall_trace_enter
-        ld      r0,GPR0(r1)     /* Restore original registers */
+        /*
+         * Restore argument registers possibly just changed.
+         * We use the return value of do_syscall_trace_enter
+         * for the call number to look up in the table (r0).
+         */
+        mr      r0,r3
         ld      r3,GPR3(r1)
         ld      r4,GPR4(r1)
         ld      r5,GPR5(r1)
@@ -638,8 +643,7 @@ user_work:
         b       .ret_from_except_lite
 
 1:      bl      .save_nvgprs
-        li      r3,0
-        addi    r4,r1,STACK_FRAME_OVERHEAD
+        addi    r3,r1,STACK_FRAME_OVERHEAD
         bl      .do_signal
         b       .ret_from_except
 
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index c4268500e856..3cb52fa0eda3 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -151,16 +151,11 @@ skpinv:	addi	r6,r6,1				/* Increment */
         /* Invalidate TLB0 */
         li      r6,0x04
         tlbivax 0,r6
-#ifdef CONFIG_SMP
-        tlbsync
-#endif
+        TLBSYNC
         /* Invalidate TLB1 */
         li      r6,0x0c
         tlbivax 0,r6
-#ifdef CONFIG_SMP
-        tlbsync
-#endif
-        msync
+        TLBSYNC
 
 /* 3. Setup a temp mapping and jump to it */
         andi.   r5, r3, 0x1     /* Find an entry not used and is non-zero */
@@ -238,10 +233,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
         /* Invalidate TLB1 */
         li      r9,0x0c
         tlbivax 0,r9
-#ifdef CONFIG_SMP
-        tlbsync
-#endif
-        msync
+        TLBSYNC
 
 /* 6. Setup KERNELBASE mapping in TLB1[0] */
         lis     r6,0x1000               /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
@@ -283,10 +275,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
         /* Invalidate TLB1 */
         li      r9,0x0c
         tlbivax 0,r9
-#ifdef CONFIG_SMP
-        tlbsync
-#endif
-        msync
+        TLBSYNC
 
         /* Establish the interrupt vector offsets */
         SET_IVOR(0,  CriticalInput);
@@ -483,90 +472,16 @@ interrupt_base:
 
         /* Data Storage Interrupt */
         START_EXCEPTION(DataStorage)
-        mtspr   SPRN_SPRG0, r10         /* Save some working registers */
-        mtspr   SPRN_SPRG1, r11
-        mtspr   SPRN_SPRG4W, r12
-        mtspr   SPRN_SPRG5W, r13
-        mfcr    r11
-        mtspr   SPRN_SPRG7W, r11
-
-        /*
-         * Check if it was a store fault, if not then bail
-         * because a user tried to access a kernel or
-         * read-protected page.  Otherwise, get the
-         * offending address and handle it.
-         */
-        mfspr   r10, SPRN_ESR
-        andis.  r10, r10, ESR_ST@h
-        beq     2f
-
-        mfspr   r10, SPRN_DEAR          /* Get faulting address */
-
-        /* If we are faulting a kernel address, we have to use the
-         * kernel page tables.
-         */
-        lis     r11, PAGE_OFFSET@h
-        cmplw   0, r10, r11
-        bge     2f
-
-        /* Get the PGD for the current thread */
-3:
-        mfspr   r11,SPRN_SPRG3
-        lwz     r11,PGDIR(r11)
-4:
-        FIND_PTE
-
-        /* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */
-        andi.   r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE
-        cmpwi   0, r13, _PAGE_RW|_PAGE_USER
-        bne     2f                      /* Bail if not */
-
-        /* Update 'changed'. */
-        ori     r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-        stw     r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */
-
-        /* MAS2 not updated as the entry does exist in the tlb, this
-           fault taken to detect state transition (eg: COW -> DIRTY)
-         */
-        andi.   r11, r11, _PAGE_HWEXEC
-        rlwimi  r11, r11, 31, 27, 27    /* SX <- _PAGE_HWEXEC */
-        ori     r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */
-
-        /* update search PID in MAS6, AS = 0 */
-        mfspr   r12, SPRN_PID0
-        slwi    r12, r12, 16
-        mtspr   SPRN_MAS6, r12
-
-        /* find the TLB index that caused the fault.  It has to be here. */
-        tlbsx   0, r10
-
-        /* only update the perm bits, assume the RPN is fine */
-        mfspr   r12, SPRN_MAS3
-        rlwimi  r12, r11, 0, 20, 31
-        mtspr   SPRN_MAS3,r12
-        tlbwe
-
-        /* Done...restore registers and get out of here.  */
-        mfspr   r11, SPRN_SPRG7R
-        mtcr    r11
-        mfspr   r13, SPRN_SPRG5R
-        mfspr   r12, SPRN_SPRG4R
-        mfspr   r11, SPRN_SPRG1
-        mfspr   r10, SPRN_SPRG0
-        rfi                     /* Force context change */
-
-2:
-        /*
-         * The bailout.  Restore registers to pre-exception conditions
-         * and call the heavyweights to help us out.
-         */
-        mfspr   r11, SPRN_SPRG7R
-        mtcr    r11
-        mfspr   r13, SPRN_SPRG5R
-        mfspr   r12, SPRN_SPRG4R
-        mfspr   r11, SPRN_SPRG1
-        mfspr   r10, SPRN_SPRG0
-        b       data_access
+        NORMAL_EXCEPTION_PROLOG
+        mfspr   r5,SPRN_ESR             /* Grab the ESR, save it, pass arg3 */
+        stw     r5,_ESR(r11)
+        mfspr   r4,SPRN_DEAR            /* Grab the DEAR, save it, pass arg2 */
+        andis.  r10,r5,(ESR_ILK|ESR_DLK)@h
+        bne     1f
+        EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+1:
+        addi    r3,r1,STACK_FRAME_OVERHEAD
+        EXC_XFER_EE_LITE(0x0300, CacheLockingException)
 
         /* Instruction Storage Interrupt */
         INSTRUCTION_STORAGE_EXCEPTION
@@ -645,15 +560,30 @@ interrupt_base:
         lwz     r11,PGDIR(r11)
 
 4:
+        /* Mask of required permission bits. Note that while we
+         * do copy ESR:ST to _PAGE_RW position as trying to write
+         * to an RO page is pretty common, we don't do it with
+         * _PAGE_DIRTY. We could do it, but it's a fairly rare
+         * event so I'd rather take the overhead when it happens
+         * rather than adding an instruction here. We should measure
+         * whether the whole thing is worth it in the first place
+         * as we could avoid loading SPRN_ESR completely in the first
+         * place...
+         *
+         * TODO: Is it worth doing that mfspr & rlwimi in the first
+         *       place or can we save a couple of instructions here ?
+         */
+        mfspr   r12,SPRN_ESR
+        li      r13,_PAGE_PRESENT|_PAGE_ACCESSED
+        rlwimi  r13,r12,11,29,29
+
         FIND_PTE
-        andi.   r13, r11, _PAGE_PRESENT /* Is the page present? */
-        beq     2f                      /* Bail if not present */
+        andc.   r13,r13,r11             /* Check permission */
+        bne     2f                      /* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
         lwz     r13, 0(r12)
 #endif
-        ori     r11, r11, _PAGE_ACCESSED
-        stw     r11, PTE_FLAGS_OFFSET(r12)
 
          /* Jump to common tlb load */
         b       finish_tlb_load
@@ -667,7 +597,7 @@ interrupt_base:
         mfspr   r12, SPRN_SPRG4R
         mfspr   r11, SPRN_SPRG1
         mfspr   r10, SPRN_SPRG0
-        b       data_access
+        b       DataStorage
 
         /* Instruction TLB Error Interrupt */
         /*
@@ -705,15 +635,16 @@ interrupt_base:
         lwz     r11,PGDIR(r11)
 
 4:
+        /* Make up the required permissions */
+        li      r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+
         FIND_PTE
-        andi.   r13, r11, _PAGE_PRESENT /* Is the page present? */
-        beq     2f                      /* Bail if not present */
+        andc.   r13,r13,r11             /* Check permission */
+        bne     2f                      /* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
         lwz     r13, 0(r12)
 #endif
-        ori     r11, r11, _PAGE_ACCESSED
-        stw     r11, PTE_FLAGS_OFFSET(r12)
 
         /* Jump to common TLB load point */
         b       finish_tlb_load
@@ -768,29 +699,13 @@ interrupt_base:
  * Local functions
  */
 
-        /*
-         * Data TLB exceptions will bail out to this point
-         * if they can't resolve the lightweight TLB fault.
-         */
-data_access:
-        NORMAL_EXCEPTION_PROLOG
-        mfspr   r5,SPRN_ESR             /* Grab the ESR, save it, pass arg3 */
-        stw     r5,_ESR(r11)
-        mfspr   r4,SPRN_DEAR            /* Grab the DEAR, save it, pass arg2 */
-        andis.  r10,r5,(ESR_ILK|ESR_DLK)@h
-        bne     1f
-        EXC_XFER_EE_LITE(0x0300, handle_page_fault)
-1:
-        addi    r3,r1,STACK_FRAME_OVERHEAD
-        EXC_XFER_EE_LITE(0x0300, CacheLockingException)
-
 /*
-
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
  *      r10 - EA of fault
  *      r11 - TLB (info from Linux PTE)
- *      r12, r13 - available to use
+ *      r12 - available to use
+ *      r13 - upper bits of PTE (if PTE_64BIT) or available to use
  *      CR5 - results of addr >= PAGE_OFFSET
  *      MAS0, MAS1 - loaded with proper value when we get here
  *      MAS2, MAS3 - will need additional info from Linux PTE
@@ -812,20 +727,14 @@ finish_tlb_load:
 #endif
         mtspr   SPRN_MAS2, r12
 
-        bge     5, 1f
-
-        /* is user addr */
-        andi.   r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC)
+        li      r10, (_PAGE_HWEXEC | _PAGE_PRESENT)
+        rlwimi  r10, r11, 31, 29, 29    /* extract _PAGE_DIRTY into SW */
+        and     r12, r11, r10
         andi.   r10, r11, _PAGE_USER    /* Test for _PAGE_USER */
-        srwi    r10, r12, 1
-        or      r12, r12, r10   /* Copy user perms into supervisor */
-        iseleq  r12, 0, r12
-        b       2f
-
-        /* is kernel addr */
-1:      rlwinm  r12, r11, 31, 29, 29    /* Extract _PAGE_HWWRITE into SW */
-        ori     r12, r12, (MAS3_SX | MAS3_SR)
-
+        slwi    r10, r12, 1
+        or      r10, r10, r12
+        iseleq  r12, r12, r10
+        
 #ifdef CONFIG_PTE_64BIT
 2:      rlwimi  r12, r13, 24, 0, 7      /* grab RPN[32:39] */
         rlwimi  r12, r11, 24, 8, 19     /* grab RPN[40:51] */
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index c3cf0e8f3ac1..d308a9f70f1b 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -60,7 +60,7 @@ void cpu_idle(void)
 
         set_thread_flag(TIF_POLLING_NRFLAG);
         while (1) {
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 while (!need_resched() && !cpu_should_die()) {
                         ppc64_runlatch_off();
 
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 8c68ee9e5d1c..550a19399bfa 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -49,6 +49,8 @@ static int novmerge = 1;
 
 static int protect4gb = 1;
 
+static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
+
 static inline unsigned long iommu_num_pages(unsigned long vaddr,
                                             unsigned long slen)
 {
@@ -186,10 +188,12 @@ static unsigned long iommu_range_alloc(struct device *dev,
 static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
                               void *page, unsigned int npages,
                               enum dma_data_direction direction,
-                              unsigned long mask, unsigned int align_order)
+                              unsigned long mask, unsigned int align_order,
+                              struct dma_attrs *attrs)
 {
         unsigned long entry, flags;
         dma_addr_t ret = DMA_ERROR_CODE;
+        int build_fail;
 
         spin_lock_irqsave(&(tbl->it_lock), flags);
 
@@ -204,9 +208,21 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
         ret = entry << IOMMU_PAGE_SHIFT;        /* Set the return dma address */
 
         /* Put the TCEs in the HW table */
-        ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & IOMMU_PAGE_MASK,
-                         direction);
+        build_fail = ppc_md.tce_build(tbl, entry, npages,
+                                      (unsigned long)page & IOMMU_PAGE_MASK,
+                                      direction, attrs);
+
+        /* ppc_md.tce_build() only returns non-zero for transient errors.
+         * Clean up the table bitmap in this case and return
+         * DMA_ERROR_CODE. For all other errors the functionality is
+         * not altered.
+         */
+        if (unlikely(build_fail)) {
+                __iommu_free(tbl, ret, npages);
 
+                spin_unlock_irqrestore(&(tbl->it_lock), flags);
+                return DMA_ERROR_CODE;
+        }
 
         /* Flush/invalidate TLB caches if necessary */
         if (ppc_md.tce_flush)
@@ -275,7 +291,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
         dma_addr_t dma_next = 0, dma_addr;
         unsigned long flags;
         struct scatterlist *s, *outs, *segstart;
-        int outcount, incount, i;
+        int outcount, incount, i, build_fail = 0;
         unsigned int align;
         unsigned long handle;
         unsigned int max_seg_size;
@@ -336,7 +352,11 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
                             npages, entry, dma_addr);
 
                 /* Insert into HW table */
-                ppc_md.tce_build(tbl, entry, npages, vaddr & IOMMU_PAGE_MASK, direction);
+                build_fail = ppc_md.tce_build(tbl, entry, npages,
+                                              vaddr & IOMMU_PAGE_MASK,
+                                              direction, attrs);
+                if(unlikely(build_fail))
+                        goto failure;
 
                 /* If we are in an open segment, try merging */
                 if (segstart != s) {
@@ -573,7 +593,8 @@ dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
                         align = PAGE_SHIFT - IOMMU_PAGE_SHIFT;
 
                 dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction,
-                                         mask >> IOMMU_PAGE_SHIFT, align);
+                                         mask >> IOMMU_PAGE_SHIFT, align,
+                                         attrs);
                 if (dma_handle == DMA_ERROR_CODE) {
                         if (printk_ratelimit())  {
                                 printk(KERN_INFO "iommu_alloc failed, "
@@ -642,7 +663,7 @@ void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
         nio_pages = size >> IOMMU_PAGE_SHIFT;
         io_order = get_iommu_order(size);
         mapping = iommu_alloc(dev, tbl, ret, nio_pages, DMA_BIDIRECTIONAL,
-                              mask >> IOMMU_PAGE_SHIFT, io_order);
+                              mask >> IOMMU_PAGE_SHIFT, io_order, NULL);
         if (mapping == DMA_ERROR_CODE) {
                 free_pages((unsigned long)ret, order);
                 return NULL;
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
new file mode 100644
index 000000000000..b4fdf2f2743c
--- /dev/null
+++ b/arch/powerpc/kernel/kgdb.c
@@ -0,0 +1,410 @@
+/*
+ * PowerPC backend to the KGDB stub.
+ *
+ * 1998 (c) Michael AK Tesch (tesch@cs.wisc.edu)
+ * Copyright (C) 2003 Timesys Corporation.
+ * Copyright (C) 2004-2006 MontaVista Software, Inc.
+ * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
+ * PPC32 support restored by Vitaly Wool <vwool@ru.mvista.com> and
+ * Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ * Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program as licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/smp.h>
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+
+/*
+ * This table contains the mapping between PowerPC hardware trap types, and
+ * signals, which are primarily what GDB understands.  GDB and the kernel
+ * don't always agree on values, so we use constants taken from gdb-6.2.
+ */
+static struct hard_trap_info
+{
+        unsigned int tt;                /* Trap type code for powerpc */
+        unsigned char signo;            /* Signal that we map this trap into */
+} hard_trap_info[] = {
+        { 0x0100, 0x02 /* SIGINT */  },         /* system reset */
+        { 0x0200, 0x0b /* SIGSEGV */ },         /* machine check */
+        { 0x0300, 0x0b /* SIGSEGV */ },         /* data access */
+        { 0x0400, 0x0b /* SIGSEGV */ },         /* instruction access */
+        { 0x0500, 0x02 /* SIGINT */  },         /* external interrupt */
+        { 0x0600, 0x0a /* SIGBUS */  },         /* alignment */
+        { 0x0700, 0x05 /* SIGTRAP */ },         /* program check */
+        { 0x0800, 0x08 /* SIGFPE */  },         /* fp unavailable */
+        { 0x0900, 0x0e /* SIGALRM */ },         /* decrementer */
+        { 0x0c00, 0x14 /* SIGCHLD */ },         /* system call */
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+        { 0x2002, 0x05 /* SIGTRAP */ },         /* debug */
+#if defined(CONFIG_FSL_BOOKE)
+        { 0x2010, 0x08 /* SIGFPE */  },         /* spe unavailable */
+        { 0x2020, 0x08 /* SIGFPE */  },         /* spe unavailable */
+        { 0x2030, 0x08 /* SIGFPE */  },         /* spe fp data */
+        { 0x2040, 0x08 /* SIGFPE */  },         /* spe fp data */
+        { 0x2050, 0x08 /* SIGFPE */  },         /* spe fp round */
+        { 0x2060, 0x0e /* SIGILL */  },         /* performace monitor */
+        { 0x2900, 0x08 /* SIGFPE */  },         /* apu unavailable */
+        { 0x3100, 0x0e /* SIGALRM */ },         /* fixed interval timer */
+        { 0x3200, 0x02 /* SIGINT */  },         /* watchdog */
+#else /* ! CONFIG_FSL_BOOKE */
+        { 0x1000, 0x0e /* SIGALRM */ },         /* prog interval timer */
+        { 0x1010, 0x0e /* SIGALRM */ },         /* fixed interval timer */
+        { 0x1020, 0x02 /* SIGINT */  },         /* watchdog */
+        { 0x2010, 0x08 /* SIGFPE */  },         /* fp unavailable */
+        { 0x2020, 0x08 /* SIGFPE */  },         /* ap unavailable */
+#endif
+#else /* ! (defined(CONFIG_40x) || defined(CONFIG_BOOKE)) */
+        { 0x0d00, 0x05 /* SIGTRAP */ },         /* single-step */
+#if defined(CONFIG_8xx)
+        { 0x1000, 0x04 /* SIGILL */  },         /* software emulation */
+#else /* ! CONFIG_8xx */
+        { 0x0f00, 0x04 /* SIGILL */  },         /* performance monitor */
+        { 0x0f20, 0x08 /* SIGFPE */  },         /* altivec unavailable */
+        { 0x1300, 0x05 /* SIGTRAP */ },         /* instruction address break */
+#if defined(CONFIG_PPC64)
+        { 0x1200, 0x05 /* SIGILL */  },         /* system error */
+        { 0x1500, 0x04 /* SIGILL */  },         /* soft patch */
+        { 0x1600, 0x04 /* SIGILL */  },         /* maintenance */
+        { 0x1700, 0x08 /* SIGFPE */  },         /* altivec assist */
+        { 0x1800, 0x04 /* SIGILL */  },         /* thermal */
+#else /* ! CONFIG_PPC64 */
+        { 0x1400, 0x02 /* SIGINT */  },         /* SMI */
+        { 0x1600, 0x08 /* SIGFPE */  },         /* altivec assist */
+        { 0x1700, 0x04 /* SIGILL */  },         /* TAU */
+        { 0x2000, 0x05 /* SIGTRAP */ },         /* run mode */
+#endif
+#endif
+#endif
+        { 0x0000, 0x00 }                        /* Must be last */
+};
+
+static int computeSignal(unsigned int tt)
+{
+        struct hard_trap_info *ht;
+
+        for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+                if (ht->tt == tt)
+                        return ht->signo;
+
+        return SIGHUP;          /* default for things we don't know about */
+}
+
+static int kgdb_call_nmi_hook(struct pt_regs *regs)
+{
+        kgdb_nmicallback(raw_smp_processor_id(), regs);
+        return 0;
+}
+
+#ifdef CONFIG_SMP
+void kgdb_roundup_cpus(unsigned long flags)
+{
+        smp_send_debugger_break(MSG_ALL_BUT_SELF);
+}
+#endif
+
+/* KGDB functions to use existing PowerPC64 hooks. */
+static int kgdb_debugger(struct pt_regs *regs)
+{
+        return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs);
+}
+
+static int kgdb_handle_breakpoint(struct pt_regs *regs)
+{
+        if (user_mode(regs))
+                return 0;
+
+        if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0)
+                return 0;
+
+        if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
+                regs->nip += 4;
+
+        return 1;
+}
+
+static int kgdb_singlestep(struct pt_regs *regs)
+{
+        struct thread_info *thread_info, *exception_thread_info;
+
+        if (user_mode(regs))
+                return 0;
+
+        /*
+         * On Book E and perhaps other processsors, singlestep is handled on
+         * the critical exception stack.  This causes current_thread_info()
+         * to fail, since it it locates the thread_info by masking off
+         * the low bits of the current stack pointer.  We work around
+         * this issue by copying the thread_info from the kernel stack
+         * before calling kgdb_handle_exception, and copying it back
+         * afterwards.  On most processors the copy is avoided since
+         * exception_thread_info == thread_info.
+         */
+        thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
+        exception_thread_info = current_thread_info();
+
+        if (thread_info != exception_thread_info)
+                memcpy(exception_thread_info, thread_info, sizeof *thread_info);
+
+        kgdb_handle_exception(0, SIGTRAP, 0, regs);
+
+        if (thread_info != exception_thread_info)
+                memcpy(thread_info, exception_thread_info, sizeof *thread_info);
+
+        return 1;
+}
+
+static int kgdb_iabr_match(struct pt_regs *regs)
+{
+        if (user_mode(regs))
+                return 0;
+
+        if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+                return 0;
+        return 1;
+}
+
+static int kgdb_dabr_match(struct pt_regs *regs)
+{
+        if (user_mode(regs))
+                return 0;
+
+        if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+                return 0;
+        return 1;
+}
+
+#define PACK64(ptr, src) do { *(ptr++) = (src); } while (0)
+
+#define PACK32(ptr, src) do {          \
+        u32 *ptr32;                   \
+        ptr32 = (u32 *)ptr;           \
+        *(ptr32++) = (src);           \
+        ptr = (unsigned long *)ptr32; \
+        } while (0)
+
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+        unsigned long *ptr = gdb_regs;
+        int reg;
+
+        memset(gdb_regs, 0, NUMREGBYTES);
+
+        for (reg = 0; reg < 32; reg++)
+                PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+        for (reg = 0; reg < 32; reg++)
+                PACK64(ptr, current->thread.evr[reg]);
+#else
+        ptr += 32;
+#endif
+#else
+        /* fp registers not used by kernel, leave zero */
+        ptr += 32 * 8 / sizeof(long);
+#endif
+
+        PACK64(ptr, regs->nip);
+        PACK64(ptr, regs->msr);
+        PACK32(ptr, regs->ccr);
+        PACK64(ptr, regs->link);
+        PACK64(ptr, regs->ctr);
+        PACK32(ptr, regs->xer);
+
+        BUG_ON((unsigned long)ptr >
+               (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+        struct pt_regs *regs = (struct pt_regs *)(p->thread.ksp +
+                                                  STACK_FRAME_OVERHEAD);
+        unsigned long *ptr = gdb_regs;
+        int reg;
+
+        memset(gdb_regs, 0, NUMREGBYTES);
+
+        /* Regs GPR0-2 */
+        for (reg = 0; reg < 3; reg++)
+                PACK64(ptr, regs->gpr[reg]);
+
+        /* Regs GPR3-13 are caller saved, not in regs->gpr[] */
+        ptr += 11;
+
+        /* Regs GPR14-31 */
+        for (reg = 14; reg < 32; reg++)
+                PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+        for (reg = 0; reg < 32; reg++)
+                PACK64(ptr, p->thread.evr[reg]);
+#else
+        ptr += 32;
+#endif
+#else
+        /* fp registers not used by kernel, leave zero */
+        ptr += 32 * 8 / sizeof(long);
+#endif
+
+        PACK64(ptr, regs->nip);
+        PACK64(ptr, regs->msr);
+        PACK32(ptr, regs->ccr);
+        PACK64(ptr, regs->link);
+        PACK64(ptr, regs->ctr);
+        PACK32(ptr, regs->xer);
+
+        BUG_ON((unsigned long)ptr >
+               (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+#define UNPACK64(dest, ptr) do { dest = *(ptr++); } while (0)
+
+#define UNPACK32(dest, ptr) do {       \
+        u32 *ptr32;                   \
+        ptr32 = (u32 *)ptr;           \
+        dest = *(ptr32++);            \
+        ptr = (unsigned long *)ptr32; \
+        } while (0)
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+        unsigned long *ptr = gdb_regs;
+        int reg;
+#ifdef CONFIG_SPE
+        union {
+                u32 v32[2];
+                u64 v64;
+        } acc;
+#endif
+
+        for (reg = 0; reg < 32; reg++)
+                UNPACK64(regs->gpr[reg], ptr);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+        for (reg = 0; reg < 32; reg++)
+                UNPACK64(current->thread.evr[reg], ptr);
+#else
+        ptr += 32;
+#endif
+#else
+        /* fp registers not used by kernel, leave zero */
+        ptr += 32 * 8 / sizeof(int);
+#endif
+
+        UNPACK64(regs->nip, ptr);
+        UNPACK64(regs->msr, ptr);
+        UNPACK32(regs->ccr, ptr);
+        UNPACK64(regs->link, ptr);
+        UNPACK64(regs->ctr, ptr);
+        UNPACK32(regs->xer, ptr);
+
+        BUG_ON((unsigned long)ptr >
+               (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+/*
+ * This function does PowerPC specific procesing for interfacing to gdb.
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+                               char *remcom_in_buffer, char *remcom_out_buffer,
+                               struct pt_regs *linux_regs)
+{
+        char *ptr = &remcom_in_buffer[1];
+        unsigned long addr;
+
+        switch (remcom_in_buffer[0]) {
+                /*
+                 * sAA..AA   Step one instruction from AA..AA
+                 * This will return an error to gdb ..
+                 */
+        case 's':
+        case 'c':
+                /* handle the optional parameter */
+                if (kgdb_hex2long(&ptr, &addr))
+                        linux_regs->nip = addr;
+
+                atomic_set(&kgdb_cpu_doing_single_step, -1);
+                /* set the trace bit if we're stepping */
+                if (remcom_in_buffer[0] == 's') {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+                        mtspr(SPRN_DBCR0,
+                              mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+                        linux_regs->msr |= MSR_DE;
+#else
+                        linux_regs->msr |= MSR_SE;
+#endif
+                        kgdb_single_step = 1;
+                        if (kgdb_contthread)
+                                atomic_set(&kgdb_cpu_doing_single_step,
+                                           raw_smp_processor_id());
+                }
+                return 0;
+        }
+
+        return -1;
+}
+
+/*
+ * Global data
+ */
+struct kgdb_arch arch_kgdb_ops = {
+        .gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08},
+};
+
+static int kgdb_not_implemented(struct pt_regs *regs)
+{
+        return 0;
+}
+
+static void *old__debugger_ipi;
+static void *old__debugger;
+static void *old__debugger_bpt;
+static void *old__debugger_sstep;
+static void *old__debugger_iabr_match;
+static void *old__debugger_dabr_match;
+static void *old__debugger_fault_handler;
+
+int kgdb_arch_init(void)
+{
+        old__debugger_ipi = __debugger_ipi;
+        old__debugger = __debugger;
+        old__debugger_bpt = __debugger_bpt;
+        old__debugger_sstep = __debugger_sstep;
+        old__debugger_iabr_match = __debugger_iabr_match;
+        old__debugger_dabr_match = __debugger_dabr_match;
+        old__debugger_fault_handler = __debugger_fault_handler;
+
+        __debugger_ipi = kgdb_call_nmi_hook;
+        __debugger = kgdb_debugger;
+        __debugger_bpt = kgdb_handle_breakpoint;
+        __debugger_sstep = kgdb_singlestep;
+        __debugger_iabr_match = kgdb_iabr_match;
+        __debugger_dabr_match = kgdb_dabr_match;
+        __debugger_fault_handler = kgdb_not_implemented;
+
+        return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+        __debugger_ipi = old__debugger_ipi;
+        __debugger = old__debugger;
+        __debugger_bpt = old__debugger_bpt;
+        __debugger_sstep = old__debugger_sstep;
+        __debugger_iabr_match = old__debugger_iabr_match;
+        __debugger_dabr_match = old__debugger_dabr_match;
+        __debugger_fault_handler = old__debugger_fault_handler;
+}
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 4ba2af125450..de79915452c8 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -144,7 +144,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
         kcb->kprobe_saved_msr = regs->msr;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
                                       struct pt_regs *regs)
 {
@@ -312,8 +311,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
         unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
         INIT_HLIST_HEAD(&empty_rp);
-        spin_lock_irqsave(&kretprobe_lock, flags);
-        head = kretprobe_inst_table_head(current);
+        kretprobe_hash_lock(current, &head, &flags);
 
         /*
          * It is possible to have multiple instances associated with a given
@@ -352,7 +350,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
         regs->nip = orig_ret_address;
 
         reset_current_kprobe();
-        spin_unlock_irqrestore(&kretprobe_lock, flags);
+        kretprobe_hash_unlock(current, &flags);
         preempt_enable_no_resched();
 
         hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 4d96e1db55ee..9ddfaef1a184 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -493,18 +493,18 @@ static int __init serial_dev_init(void)
 device_initcall(serial_dev_init);
 
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
 /*
  * This is called very early, as part of console_init() (typically just after
  * time_init()). This function is respondible for trying to find a good
  * default console on serial ports. It tries to match the open firmware
- * default output with one of the available serial console drivers, either
- * one of the platform serial ports that have been probed earlier by
- * find_legacy_serial_ports() or some more platform specific ones.
+ * default output with one of the available serial console drivers that have
+ * been probed earlier by find_legacy_serial_ports()
  */
 static int __init check_legacy_serial_console(void)
 {
         struct device_node *prom_stdout = NULL;
-        int speed = 0, offset = 0;
+        int i, speed = 0, offset = 0;
         const char *name;
         const u32 *spd;
 
@@ -548,31 +548,20 @@ static int __init check_legacy_serial_console(void)
         if (spd)
                 speed = *spd;
 
-        if (0)
-                ;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-        else if (strcmp(name, "serial") == 0) {
-                int i;
-                /* Look for it in probed array */
-                for (i = 0; i < legacy_serial_count; i++) {
-                        if (prom_stdout != legacy_serial_infos[i].np)
-                                continue;
-                        offset = i;
-                        speed = legacy_serial_infos[i].speed;
-                        break;
-                }
-                if (i >= legacy_serial_count)
-                        goto not_found;
+        if (strcmp(name, "serial") != 0)
+                goto not_found;
+
+        /* Look for it in probed array */
+        for (i = 0; i < legacy_serial_count; i++) {
+                if (prom_stdout != legacy_serial_infos[i].np)
+                        continue;
+                offset = i;
+                speed = legacy_serial_infos[i].speed;
+                break;
         }
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
-        else if (strcmp(name, "ch-a") == 0)
-                offset = 0;
-        else if (strcmp(name, "ch-b") == 0)
-                offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
-        else
+        if (i >= legacy_serial_count)
                 goto not_found;
+
         of_node_put(prom_stdout);
 
         DBG("Found serial console at ttyS%d\n", offset);
@@ -591,3 +580,4 @@ static int __init check_legacy_serial_console(void)
 }
 console_initcall(check_legacy_serial_console);
 
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 827a5726a035..9f856a0c3e38 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -34,8 +34,9 @@
 #include <asm/time.h>
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
+#include <asm/vio.h>
 
-#define MODULE_VERS "1.7"
+#define MODULE_VERS "1.8"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
@@ -129,32 +130,46 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v)
 /*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
-static void log_plpar_hcall_return(unsigned long rc, char *tag)
+/**
+ * h_get_mpp
+ * H_GET_MPP hcall returns info in 7 parms
+ */
+int h_get_mpp(struct hvcall_mpp_data *mpp_data)
 {
-        switch(rc) {
-        case 0:
-                return;
-        case H_HARDWARE:
-                printk(KERN_INFO "plpar-hcall (%s) "
-                                "Hardware fault\n", tag);
-                return;
-        case H_FUNCTION:
-                printk(KERN_INFO "plpar-hcall (%s) "
-                                "Function not allowed\n", tag);
-                return;
-        case H_AUTHORITY:
-                printk(KERN_INFO "plpar-hcall (%s) "
-                                "Not authorized to this function\n", tag);
-                return;
-        case H_PARAMETER:
-                printk(KERN_INFO "plpar-hcall (%s) "
-                                "Bad parameter(s)\n",tag);
-                return;
-        default:
-                printk(KERN_INFO "plpar-hcall (%s) "
-                                "Unexpected rc(0x%lx)\n", tag, rc);
-        }
+        int rc;
+        unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+        rc = plpar_hcall9(H_GET_MPP, retbuf);
+
+        mpp_data->entitled_mem = retbuf[0];
+        mpp_data->mapped_mem = retbuf[1];
+
+        mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+        mpp_data->pool_num = retbuf[2] & 0xffff;
+
+        mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
+        mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
+        mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
+
+        mpp_data->pool_size = retbuf[4];
+        mpp_data->loan_request = retbuf[5];
+        mpp_data->backing_mem = retbuf[6];
+
+        return rc;
 }
+EXPORT_SYMBOL(h_get_mpp);
+
+struct hvcall_ppp_data {
+        u64     entitlement;
+        u64     unallocated_entitlement;
+        u16     group_num;
+        u16     pool_num;
+        u8      capped;
+        u8      weight;
+        u8      unallocated_weight;
+        u16     active_procs_in_pool;
+        u16     active_system_procs;
+};
 
 /*
  * H_GET_PPP hcall returns info in 4 parms.
@@ -176,27 +191,30 @@ static void log_plpar_hcall_return(unsigned long rc, char *tag)
  *              XXXX - Active processors in Physical Processor Pool.
  *                  XXXX  - Processors active on platform.
  */
-static unsigned int h_get_ppp(unsigned long *entitled,
-                              unsigned long *unallocated,
-                              unsigned long *aggregation,
-                              unsigned long *resource)
+static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
 {
         unsigned long rc;
         unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 
         rc = plpar_hcall(H_GET_PPP, retbuf);
 
-        *entitled = retbuf[0];
-        *unallocated = retbuf[1];
-        *aggregation = retbuf[2];
-        *resource = retbuf[3];
+        ppp_data->entitlement = retbuf[0];
+        ppp_data->unallocated_entitlement = retbuf[1];
+
+        ppp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+        ppp_data->pool_num = retbuf[2] & 0xffff;
 
-        log_plpar_hcall_return(rc, "H_GET_PPP");
+        ppp_data->capped = (retbuf[3] >> 6 * 8) & 0x01;
+        ppp_data->weight = (retbuf[3] >> 5 * 8) & 0xff;
+        ppp_data->unallocated_weight = (retbuf[3] >> 4 * 8) & 0xff;
+        ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff;
+        ppp_data->active_system_procs = retbuf[3] & 0xffff;
 
         return rc;
 }
 
-static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
+static unsigned h_pic(unsigned long *pool_idle_time,
+                      unsigned long *num_procs)
 {
         unsigned long rc;
         unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
@@ -206,8 +224,87 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
         *pool_idle_time = retbuf[0];
         *num_procs = retbuf[1];
 
-        if (rc != H_AUTHORITY)
-                log_plpar_hcall_return(rc, "H_PIC");
+        return rc;
+}
+
+/*
+ * parse_ppp_data
+ * Parse out the data returned from h_get_ppp and h_pic
+ */
+static void parse_ppp_data(struct seq_file *m)
+{
+        struct hvcall_ppp_data ppp_data;
+        int rc;
+
+        rc = h_get_ppp(&ppp_data);
+        if (rc)
+                return;
+
+        seq_printf(m, "partition_entitled_capacity=%ld\n",
+                   ppp_data.entitlement);
+        seq_printf(m, "group=%d\n", ppp_data.group_num);
+        seq_printf(m, "system_active_processors=%d\n",
+                   ppp_data.active_system_procs);
+
+        /* pool related entries are apropriate for shared configs */
+        if (lppaca[0].shared_proc) {
+                unsigned long pool_idle_time, pool_procs;
+
+                seq_printf(m, "pool=%d\n", ppp_data.pool_num);
+
+                /* report pool_capacity in percentage */
+                seq_printf(m, "pool_capacity=%d\n",
+                           ppp_data.active_procs_in_pool * 100);
+
+                h_pic(&pool_idle_time, &pool_procs);
+                seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
+                seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
+        }
+
+        seq_printf(m, "unallocated_capacity_weight=%d\n",
+                   ppp_data.unallocated_weight);
+        seq_printf(m, "capacity_weight=%d\n", ppp_data.weight);
+        seq_printf(m, "capped=%d\n", ppp_data.capped);
+        seq_printf(m, "unallocated_capacity=%ld\n",
+                   ppp_data.unallocated_entitlement);
+}
+
+/**
+ * parse_mpp_data
+ * Parse out data returned from h_get_mpp
+ */
+static void parse_mpp_data(struct seq_file *m)
+{
+        struct hvcall_mpp_data mpp_data;
+        int rc;
+
+        rc = h_get_mpp(&mpp_data);
+        if (rc)
+                return;
+
+        seq_printf(m, "entitled_memory=%ld\n", mpp_data.entitled_mem);
+
+        if (mpp_data.mapped_mem != -1)
+                seq_printf(m, "mapped_entitled_memory=%ld\n",
+                           mpp_data.mapped_mem);
+
+        seq_printf(m, "entitled_memory_group_number=%d\n", mpp_data.group_num);
+        seq_printf(m, "entitled_memory_pool_number=%d\n", mpp_data.pool_num);
+
+        seq_printf(m, "entitled_memory_weight=%d\n", mpp_data.mem_weight);
+        seq_printf(m, "unallocated_entitled_memory_weight=%d\n",
+                   mpp_data.unallocated_mem_weight);
+        seq_printf(m, "unallocated_io_mapping_entitlement=%ld\n",
+                   mpp_data.unallocated_entitlement);
+
+        if (mpp_data.pool_size != -1)
+                seq_printf(m, "entitled_memory_pool_size=%ld bytes\n",
+                           mpp_data.pool_size);
+
+        seq_printf(m, "entitled_memory_loan_request=%ld\n",
+                   mpp_data.loan_request);
+
+        seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem);
 }
 
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
@@ -313,6 +410,25 @@ static int lparcfg_count_active_processors(void)
         return count;
 }
 
+static void pseries_cmo_data(struct seq_file *m)
+{
+        int cpu;
+        unsigned long cmo_faults = 0;
+        unsigned long cmo_fault_time = 0;
+
+        if (!firmware_has_feature(FW_FEATURE_CMO))
+                return;
+
+        for_each_possible_cpu(cpu) {
+                cmo_faults += lppaca[cpu].cmo_faults;
+                cmo_fault_time += lppaca[cpu].cmo_fault_time;
+        }
+
+        seq_printf(m, "cmo_faults=%lu\n", cmo_faults);
+        seq_printf(m, "cmo_fault_time_usec=%lu\n",
+                   cmo_fault_time / tb_ticks_per_usec);
+}
+
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
 {
         int partition_potential_processors;
@@ -334,60 +450,13 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
         partition_active_processors = lparcfg_count_active_processors();
 
         if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
-                unsigned long h_entitled, h_unallocated;
-                unsigned long h_aggregation, h_resource;
-                unsigned long pool_idle_time, pool_procs;
-                unsigned long purr;
-
-                h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
-                          &h_resource);
-
-                seq_printf(m, "R4=0x%lx\n", h_entitled);
-                seq_printf(m, "R5=0x%lx\n", h_unallocated);
-                seq_printf(m, "R6=0x%lx\n", h_aggregation);
-                seq_printf(m, "R7=0x%lx\n", h_resource);
-
-                purr = get_purr();
-
                 /* this call handles the ibm,get-system-parameter contents */
                 parse_system_parameter_string(m);
+                parse_ppp_data(m);
+                parse_mpp_data(m);
+                pseries_cmo_data(m);
 
-                seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
-
-                seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
-
-                seq_printf(m, "system_active_processors=%ld\n",
-                           (h_resource >> 0 * 8) & 0xffff);
-
-                /* pool related entries are apropriate for shared configs */
-                if (lppaca[0].shared_proc) {
-
-                        h_pic(&pool_idle_time, &pool_procs);
-
-                        seq_printf(m, "pool=%ld\n",
-                                   (h_aggregation >> 0 * 8) & 0xffff);
-
-                        /* report pool_capacity in percentage */
-                        seq_printf(m, "pool_capacity=%ld\n",
-                                   ((h_resource >> 2 * 8) & 0xffff) * 100);
-
-                        seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
-
-                        seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
-                }
-
-                seq_printf(m, "unallocated_capacity_weight=%ld\n",
-                           (h_resource >> 4 * 8) & 0xFF);
-
-                seq_printf(m, "capacity_weight=%ld\n",
-                           (h_resource >> 5 * 8) & 0xFF);
-
-                seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
-
-                seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
-
-                seq_printf(m, "purr=%ld\n", purr);
-
+                seq_printf(m, "purr=%ld\n", get_purr());
         } else {                /* non SPLPAR case */
 
                 seq_printf(m, "system_active_processors=%d\n",
@@ -414,6 +483,83 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
         return 0;
 }
 
+static ssize_t update_ppp(u64 *entitlement, u8 *weight)
+{
+        struct hvcall_ppp_data ppp_data;
+        u8 new_weight;
+        u64 new_entitled;
+        ssize_t retval;
+
+        /* Get our current parameters */
+        retval = h_get_ppp(&ppp_data);
+        if (retval)
+                return retval;
+
+        if (entitlement) {
+                new_weight = ppp_data.weight;
+                new_entitled = *entitlement;
+        } else if (weight) {
+                new_weight = *weight;
+                new_entitled = ppp_data.entitlement;
+        } else
+                return -EINVAL;
+
+        pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+                 __FUNCTION__, ppp_data.entitlement, ppp_data.weight);
+
+        pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+                 __FUNCTION__, new_entitled, new_weight);
+
+        retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
+        return retval;
+}
+
+/**
+ * update_mpp
+ *
+ * Update the memory entitlement and weight for the partition.  Caller must
+ * specify either a new entitlement or weight, not both, to be updated
+ * since the h_set_mpp call takes both entitlement and weight as parameters.
+ */
+static ssize_t update_mpp(u64 *entitlement, u8 *weight)
+{
+        struct hvcall_mpp_data mpp_data;
+        u64 new_entitled;
+        u8 new_weight;
+        ssize_t rc;
+
+        if (entitlement) {
+                /* Check with vio to ensure the new memory entitlement
+                 * can be handled.
+                 */
+                rc = vio_cmo_entitlement_update(*entitlement);
+                if (rc)
+                        return rc;
+        }
+
+        rc = h_get_mpp(&mpp_data);
+        if (rc)
+                return rc;
+
+        if (entitlement) {
+                new_weight = mpp_data.mem_weight;
+                new_entitled = *entitlement;
+        } else if (weight) {
+                new_weight = *weight;
+                new_entitled = mpp_data.entitled_mem;
+        } else
+                return -EINVAL;
+
+        pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+                 __FUNCTION__, mpp_data.entitled_mem, mpp_data.mem_weight);
+
+        pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+                 __FUNCTION__, new_entitled, new_weight);
+
+        rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
+        return rc;
+}
+
 /*
  * Interface for changing system parameters (variable capacity weight
  * and entitled capacity).  Format of input is "param_name=value";
@@ -427,35 +573,27 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 static ssize_t lparcfg_write(struct file *file, const char __user * buf,
                              size_t count, loff_t * off)
 {
-        char *kbuf;
+        int kbuf_sz = 64;
+        char kbuf[kbuf_sz];
         char *tmp;
         u64 new_entitled, *new_entitled_ptr = &new_entitled;
         u8 new_weight, *new_weight_ptr = &new_weight;
-
-        unsigned long current_entitled; /* parameters for h_get_ppp */
-        unsigned long dummy;
-        unsigned long resource;
-        u8 current_weight;
-
-        ssize_t retval = -ENOMEM;
+        ssize_t retval;
 
         if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
                         firmware_has_feature(FW_FEATURE_ISERIES))
                 return -EINVAL;
 
-        kbuf = kmalloc(count, GFP_KERNEL);
-        if (!kbuf)
-                goto out;
+        if (count > kbuf_sz)
+                return -EINVAL;
 
-        retval = -EFAULT;
         if (copy_from_user(kbuf, buf, count))
-                goto out;
+                return -EFAULT;
 
-        retval = -EINVAL;
         kbuf[count - 1] = '\0';
         tmp = strchr(kbuf, '=');
         if (!tmp)
-                goto out;
+                return -EINVAL;
 
         *tmp++ = '\0';
 
@@ -463,34 +601,32 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
                 char *endp;
                 *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
                 if (endp == tmp)
-                        goto out;
-                new_weight_ptr = &current_weight;
+                        return -EINVAL;
+
+                retval = update_ppp(new_entitled_ptr, NULL);
         } else if (!strcmp(kbuf, "capacity_weight")) {
                 char *endp;
                 *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
                 if (endp == tmp)
-                        goto out;
-                new_entitled_ptr = &current_entitled;
-        } else
-                goto out;
-
-        /* Get our current parameters */
-        retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
-        if (retval) {
-                retval = -EIO;
-                goto out;
-        }
-
-        current_weight = (resource >> 5 * 8) & 0xFF;
+                        return -EINVAL;
 
-        pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-                 __func__, current_entitled, current_weight);
+                retval = update_ppp(NULL, new_weight_ptr);
+        } else if (!strcmp(kbuf, "entitled_memory")) {
+                char *endp;
+                *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
+                if (endp == tmp)
+                        return -EINVAL;
 
-        pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
-                 __func__, *new_entitled_ptr, *new_weight_ptr);
+                retval = update_mpp(new_entitled_ptr, NULL);
+        } else if (!strcmp(kbuf, "entitled_memory_weight")) {
+                char *endp;
+                *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
+                if (endp == tmp)
+                        return -EINVAL;
 
-        retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
-                                    *new_weight_ptr);
+                retval = update_mpp(NULL, new_weight_ptr);
+        } else
+                return -EINVAL;
 
         if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
                 retval = count;
@@ -506,8 +642,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
                 retval = -EIO;
         }
 
-out:
-        kfree(kbuf);
         return retval;
 }
 
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 29a0e039d436..aab76887a842 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -48,7 +48,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
         if (ppc_md.machine_kexec)
                 ppc_md.machine_kexec(image);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 063cdd413049..224e9a11765c 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -598,6 +598,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
                         res->start = pci_addr;
                         break;
                 case 2:         /* PCI Memory space */
+                case 3:         /* PCI 64 bits Memory space */
                         printk(KERN_INFO
                                " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
                                cpu_addr, cpu_addr + size - 1, pci_addr,
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 219f3634115e..e030f3bd5024 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -47,6 +47,8 @@
 #ifdef CONFIG_PPC64
 #include <asm/firmware.h>
 #endif
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
 
 extern unsigned long _get_SP(void);
 
@@ -239,6 +241,35 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+void do_dabr(struct pt_regs *regs, unsigned long address,
+                    unsigned long error_code)
+{
+        siginfo_t info;
+
+        if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+                        11, SIGSEGV) == NOTIFY_STOP)
+                return;
+
+        if (debugger_dabr_match(regs))
+                return;
+
+        /* Clear the DAC and struct entries.  One shot trigger */
+#if defined(CONFIG_BOOKE)
+        mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
+                                                        | DBCR0_IDM));
+#endif
+
+        /* Clear the DABR */
+        set_dabr(0);
+
+        /* Deliver the signal to userspace */
+        info.si_signo = SIGTRAP;
+        info.si_errno = 0;
+        info.si_code = TRAP_HWBKPT;
+        info.si_addr = (void __user *)address;
+        force_sig_info(SIGTRAP, &info, current);
+}
+
 static DEFINE_PER_CPU(unsigned long, current_dabr);
 
 int set_dabr(unsigned long dabr)
@@ -254,6 +285,11 @@ int set_dabr(unsigned long dabr)
 #if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
         mtspr(SPRN_DABR, dabr);
 #endif
+
+#if defined(CONFIG_BOOKE)
+        mtspr(SPRN_DAC1, dabr);
+#endif
+
         return 0;
 }
 
@@ -337,6 +373,12 @@ struct task_struct *__switch_to(struct task_struct *prev,
         if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
                 set_dabr(new->thread.dabr);
 
+#if defined(CONFIG_BOOKE)
+        /* If new thread DAC (HW breakpoint) is the same then leave it */
+        if (new->thread.dabr)
+                set_dabr(new->thread.dabr);
+#endif
+
         new_thread = &new->thread;
         old_thread = &current->thread;
 
@@ -525,6 +567,10 @@ void flush_thread(void)
         if (current->thread.dabr) {
                 current->thread.dabr = 0;
                 set_dabr(0);
+
+#if defined(CONFIG_BOOKE)
+                current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
+#endif
         }
 }
 
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1ea8c8d3ce89..b72849ac7db3 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -205,8 +205,6 @@ static int __initdata mem_reserve_cnt;
 static cell_t __initdata regbuf[1024];
 
 
-#define MAX_CPU_THREADS 2
-
 /*
  * Error results ... some OF calls will return "-1" on error, some
  * will return 0, some will return either. To simplify, here are
@@ -643,6 +641,11 @@ static void __init early_cmdline_parse(void)
 #else
 #define OV5_MSI                 0x00
 #endif /* CONFIG_PCI_MSI */
+#ifdef CONFIG_PPC_SMLPAR
+#define OV5_CMO                 0x80    /* Cooperative Memory Overcommitment */
+#else
+#define OV5_CMO                 0x00
+#endif
 
 /*
  * The architecture vector has an array of PVR mask/value pairs,
@@ -687,10 +690,12 @@ static unsigned char ibm_architecture_vec[] = {
         0,                              /* don't halt */
 
         /* option vector 5: PAPR/OF options */
-        3 - 2,                          /* length */
+        5 - 2,                          /* length */
         0,                              /* don't ignore, don't halt */
         OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
         OV5_DONATE_DEDICATE_CPU | OV5_MSI,
+        0,
+        OV5_CMO,
 };
 
 /* Old method - ELF header with PT_NOTE sections */
@@ -1332,10 +1337,6 @@ static void __init prom_hold_cpus(void)
         unsigned int reg;
         phandle node;
         char type[64];
-        int cpuid = 0;
-        unsigned int interrupt_server[MAX_CPU_THREADS];
-        unsigned int cpu_threads, hw_cpu_num;
-        int propsize;
         struct prom_t *_prom = &RELOC(prom);
         unsigned long *spinloop
                 = (void *) LOW_ADDR(__secondary_hold_spinloop);
@@ -1379,7 +1380,6 @@ static void __init prom_hold_cpus(void)
                 reg = -1;
                 prom_getprop(node, "reg", &reg, sizeof(reg));
 
-                prom_debug("\ncpuid        = 0x%x\n", cpuid);
                 prom_debug("cpu hw idx   = 0x%x\n", reg);
 
                 /* Init the acknowledge var which will be reset by
@@ -1388,28 +1388,9 @@ static void __init prom_hold_cpus(void)
                  */
                 *acknowledge = (unsigned long)-1;
 
-                propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s",
-                                        &interrupt_server,
-                                        sizeof(interrupt_server));
-                if (propsize < 0) {
-                        /* no property.  old hardware has no SMT */
-                        cpu_threads = 1;
-                        interrupt_server[0] = reg; /* fake it with phys id */
-                } else {
-                        /* We have a threaded processor */
-                        cpu_threads = propsize / sizeof(u32);
-                        if (cpu_threads > MAX_CPU_THREADS) {
-                                prom_printf("SMT: too many threads!\n"
-                                            "SMT: found %x, max is %x\n",
-                                            cpu_threads, MAX_CPU_THREADS);
-                                cpu_threads = 1; /* ToDo: panic? */
-                        }
-                }
-
-                hw_cpu_num = interrupt_server[0];
-                if (hw_cpu_num != _prom->cpu) {
+                if (reg != _prom->cpu) {
                         /* Primary Thread of non-boot cpu */
-                        prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg);
+                        prom_printf("starting cpu hw idx %x... ", reg);
                         call_prom("start-cpu", 3, 0, node,
                                   secondary_hold, reg);
 
@@ -1424,17 +1405,10 @@ static void __init prom_hold_cpus(void)
                 }
 #ifdef CONFIG_SMP
                 else
-                        prom_printf("%x : boot cpu     %x\n", cpuid, reg);
+                        prom_printf("boot cpu hw idx %x\n", reg);
 #endif /* CONFIG_SMP */
-
-                /* Reserve cpu #s for secondary threads.   They start later. */
-                cpuid += cpu_threads;
         }
 
-        if (cpuid > NR_CPUS)
-                prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)
-                            ") exceeded: ignoring extras\n");
-
         prom_debug("prom_hold_cpus: end...\n");
 }
 
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 90eb3a3e383e..bc1fb27368af 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -128,12 +128,35 @@ static void of_bus_pci_count_cells(struct device_node *np,
                 *sizec = 2;
 }
 
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
+{
+        unsigned int flags = 0;
+        u32 w = addr[0];
+
+        switch((w >> 24) & 0x03) {
+        case 0x01:
+                flags |= IORESOURCE_IO;
+                break;
+        case 0x02: /* 32 bits */
+        case 0x03: /* 64 bits */
+                flags |= IORESOURCE_MEM;
+                break;
+        }
+        if (w & 0x40000000)
+                flags |= IORESOURCE_PREFETCH;
+        return flags;
+}
+
 static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 {
         u64 cp, s, da;
+        unsigned int af, rf;
+
+        af = of_bus_pci_get_flags(addr);
+        rf = of_bus_pci_get_flags(range);
 
         /* Check address type match */
-        if ((addr[0] ^ range[0]) & 0x03000000)
+        if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO))
                 return OF_BAD_ADDR;
 
         /* Read address values, skipping high cell */
@@ -153,25 +176,6 @@ static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
         return of_bus_default_translate(addr + 1, offset, na - 1);
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
-{
-        unsigned int flags = 0;
-        u32 w = addr[0];
-
-        switch((w >> 24) & 0x03) {
-        case 0x01:
-                flags |= IORESOURCE_IO;
-                break;
-        case 0x02: /* 32 bits */
-        case 0x03: /* 64 bits */
-                flags |= IORESOURCE_MEM;
-                break;
-        }
-        if (w & 0x40000000)
-                flags |= IORESOURCE_PREFETCH;
-        return flags;
-}
-
 const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
                         unsigned int *flags)
 {
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 8feb93e7890c..6b66cd85b433 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -22,6 +22,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/elf.h>
 #include <linux/user.h>
 #include <linux/security.h>
@@ -703,7 +704,7 @@ void user_enable_single_step(struct task_struct *task)
 
         if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-                task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC;
+                task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
                 regs->msr |= MSR_DE;
 #else
                 regs->msr |= MSR_SE;
@@ -716,9 +717,16 @@ void user_disable_single_step(struct task_struct *task)
 {
         struct pt_regs *regs = task->thread.regs;
 
+
+#if defined(CONFIG_BOOKE)
+        /* If DAC then do not single step, skip */
+        if (task->thread.dabr)
+                return;
+#endif
+
         if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-                task->thread.dbcr0 = 0;
+                task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM);
                 regs->msr &= ~MSR_DE;
 #else
                 regs->msr &= ~MSR_SE;
@@ -727,22 +735,76 @@ void user_disable_single_step(struct task_struct *task)
         clear_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
-static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
                                unsigned long data)
 {
-        /* We only support one DABR and no IABRS at the moment */
+        /* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+         *  For embedded processors we support one DAC and no IAC's at the
+         *  moment.
+         */
         if (addr > 0)
                 return -EINVAL;
 
-        /* The bottom 3 bits are flags */
+        /* The bottom 3 bits in dabr are flags */
         if ((data & ~0x7UL) >= TASK_SIZE)
                 return -EIO;
 
-        /* Ensure translation is on */
+#ifndef CONFIG_BOOKE
+
+        /* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
+         *  It was assumed, on previous implementations, that 3 bits were
+         *  passed together with the data address, fitting the design of the
+         *  DABR register, as follows:
+         *
+         *  bit 0: Read flag
+         *  bit 1: Write flag
+         *  bit 2: Breakpoint translation
+         *
+         *  Thus, we use them here as so.
+         */
+
+        /* Ensure breakpoint translation bit is set */
         if (data && !(data & DABR_TRANSLATION))
                 return -EIO;
 
+        /* Move contents to the DABR register */
         task->thread.dabr = data;
+
+#endif
+#if defined(CONFIG_BOOKE)
+
+        /* As described above, it was assumed 3 bits were passed with the data
+         *  address, but we will assume only the mode bits will be passed
+         *  as to not cause alignment restrictions for DAC-based processors.
+         */
+
+        /* DAC's hold the whole address without any mode flags */
+        task->thread.dabr = data & ~0x3UL;
+
+        if (task->thread.dabr == 0) {
+                task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM);
+                task->thread.regs->msr &= ~MSR_DE;
+                return 0;
+        }
+
+        /* Read or Write bits must be set */
+
+        if (!(data & 0x3UL))
+                return -EINVAL;
+
+        /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
+           register */
+        task->thread.dbcr0 = DBCR0_IDM;
+
+        /* Check for write and read flags and set DBCR0
+           accordingly */
+        if (data & 0x1UL)
+                task->thread.dbcr0 |= DBSR_DAC1R;
+        if (data & 0x2UL)
+                task->thread.dbcr0 |= DBSR_DAC1W;
+
+        task->thread.regs->msr |= MSR_DE;
+#endif
         return 0;
 }
 
@@ -953,31 +1015,24 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
         return ret;
 }
 
-static void do_syscall_trace(void)
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+long do_syscall_trace_enter(struct pt_regs *regs)
 {
-        /* the 0x80 provides a way for the tracing parent to distinguish
-           between a syscall stop and SIGTRAP delivery */
-        ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-                                 ? 0x80 : 0));
-
-        /*
-         * this isn't the same as continuing with a signal, but it will do
-         * for normal use.  strace only continues with a signal if the
-         * stopping signal is not SIGTRAP.  -brl
-         */
-        if (current->exit_code) {
-                send_sig(current->exit_code, current, 1);
-                current->exit_code = 0;
-        }
-}
+        long ret = 0;
 
-void do_syscall_trace_enter(struct pt_regs *regs)
-{
         secure_computing(regs->gpr[0]);
 
-        if (test_thread_flag(TIF_SYSCALL_TRACE)
-            && (current->ptrace & PT_PTRACED))
-                do_syscall_trace();
+        if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+            tracehook_report_syscall_entry(regs))
+                /*
+                 * Tracing decided this syscall should not happen.
+                 * We'll return a bogus call number to get an ENOSYS
+                 * error, but leave the original number in regs->gpr[0].
+                 */
+                ret = -1L;
 
         if (unlikely(current->audit_context)) {
 #ifdef CONFIG_PPC64
@@ -995,16 +1050,19 @@ void do_syscall_trace_enter(struct pt_regs *regs)
                                             regs->gpr[5] & 0xffffffff,
                                             regs->gpr[6] & 0xffffffff);
         }
+
+        return ret ?: regs->gpr[0];
 }
 
 void do_syscall_trace_leave(struct pt_regs *regs)
 {
+        int step;
+
         if (unlikely(current->audit_context))
                 audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
                                    regs->result);
 
-        if ((test_thread_flag(TIF_SYSCALL_TRACE)
-             || test_thread_flag(TIF_SINGLESTEP))
-            && (current->ptrace & PT_PTRACED))
-                do_syscall_trace();
+        step = test_thread_flag(TIF_SINGLESTEP);
+        if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+                tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 09ded5c424a9..149cb112cd1a 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -286,7 +286,7 @@ static ssize_t rtas_flash_read(struct file *file, char __user *buf,
 }
 
 /* constructor for flash_block_cache */
-void rtas_block_ctor(struct kmem_cache *cache, void *ptr)
+void rtas_block_ctor(void *ptr)
 {
         memset(ptr, 0, RTAS_BLK_SIZE);
 }
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 61a3f4132087..9cc5a52711e5 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -367,7 +367,6 @@ static void __init cpu_init_thread_core_maps(int tpc)
  * setup_cpu_maps - initialize the following cpu maps:
  *                  cpu_possible_map
  *                  cpu_present_map
- *                  cpu_sibling_map
  *
  * Having the possible map set up early allows us to restrict allocations
  * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
@@ -475,29 +474,6 @@ void __init smp_setup_cpu_maps(void)
          */
         cpu_init_thread_core_maps(nthreads);
 }
-
-/*
- * Being that cpu_sibling_map is now a per_cpu array, then it cannot
- * be initialized until the per_cpu areas have been created.  This
- * function is now called from setup_per_cpu_areas().
- */
-void __init smp_setup_cpu_sibling_map(void)
-{
-#ifdef CONFIG_PPC64
-        int i, cpu, base;
-
-        for_each_possible_cpu(cpu) {
-                DBG("Sibling map for CPU %d:", cpu);
-                base = cpu_first_thread_in_core(cpu);
-                for (i = 0; i < threads_per_core; i++) {
-                        cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
-                        DBG(" %d", base + i);
-                }
-                DBG("\n");
-        }
-
-#endif /* CONFIG_PPC64 */
-}
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PCSPKR_PLATFORM
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 4efebe88e64a..066e65c59b58 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -43,10 +43,6 @@
 
 #define DBG(fmt...)
 
-#if defined CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
 int boot_cpuid;
@@ -302,18 +298,6 @@ void __init setup_arch(char **cmdline_p)
 
         xmon_setup();
 
-#if defined(CONFIG_KGDB)
-        if (ppc_md.kgdb_map_scc)
-                ppc_md.kgdb_map_scc();
-        set_debug_traps();
-        if (strstr(cmd_line, "gdb")) {
-                if (ppc_md.progress)
-                        ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
-                printk("kgdb breakpoint activated\n");
-                breakpoint();
-        }
-#endif
-
         /*
          * Set cache line size based on type of cpu as a default.
          * Systems with OF can look in the properties on the cpu node(s)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 04d8de9f0fc6..8b25f51f03bf 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -611,9 +611,6 @@ void __init setup_per_cpu_areas(void)
                 paca[i].data_offset = ptr - __per_cpu_start;
                 memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
         }
-
-        /* Now that per_cpu is setup, initialize cpu_sibling_map */
-        smp_setup_cpu_sibling_map();
 }
 #endif
 
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index ad55488939c3..a54405ebd7b0 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -9,7 +9,7 @@
  * this archive for more details.
  */
 
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/signal.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -112,7 +112,7 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
         }
 }
 
-int do_signal(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 {
         siginfo_t info;
         int signr;
@@ -145,8 +145,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
          * user space. The DABR will have been cleared if it
          * triggered inside the kernel.
          */
-        if (current->thread.dabr)
+        if (current->thread.dabr) {
                 set_dabr(current->thread.dabr);
+#if defined(CONFIG_BOOKE)
+                mtspr(SPRN_DBCR0, current->thread.dbcr0);
+#endif
+        }
 
         if (is32) {
                 if (ka.sa.sa_flags & SA_SIGINFO)
@@ -173,11 +177,28 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
                  * its frame, and we can clear the TLF_RESTORE_SIGMASK flag.
                  */
                 current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK;
+
+                /*
+                 * Let tracing know that we've done the handler setup.
+                 */
+                tracehook_signal_handler(signr, &info, &ka, regs,
+                                         test_thread_flag(TIF_SINGLESTEP));
         }
 
         return ret;
 }
 
+void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+{
+        if (thread_info_flags & _TIF_SIGPENDING)
+                do_signal_pending(NULL, regs);
+
+        if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+                clear_thread_flag(TIF_NOTIFY_RESUME);
+                tracehook_notify_resume(regs);
+        }
+}
+
 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
                 unsigned long r5, unsigned long r6, unsigned long r7,
                 unsigned long r8, struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index f5ae9fa222ea..5337ca7bb649 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -41,6 +41,7 @@
 #include <asm/smp.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
+#include <asm/cputhreads.h>
 #include <asm/cputable.h>
 #include <asm/system.h>
 #include <asm/mpic.h>
@@ -62,10 +63,12 @@ struct thread_info *secondary_ti;
 cpumask_t cpu_possible_map = CPU_MASK_NONE;
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
+DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE;
 
 EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
@@ -228,6 +231,8 @@ void __devinit smp_prepare_boot_cpu(void)
         BUG_ON(smp_processor_id() != boot_cpuid);
 
         cpu_set(boot_cpuid, cpu_online_map);
+        cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
+        cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
 #ifdef CONFIG_PPC64
         paca[boot_cpuid].__current = current;
 #endif
@@ -375,11 +380,60 @@ int __cpuinit __cpu_up(unsigned int cpu)
         return 0;
 }
 
+/* Return the value of the reg property corresponding to the given
+ * logical cpu.
+ */
+int cpu_to_core_id(int cpu)
+{
+        struct device_node *np;
+        const int *reg;
+        int id = -1;
+
+        np = of_get_cpu_node(cpu, NULL);
+        if (!np)
+                goto out;
+
+        reg = of_get_property(np, "reg", NULL);
+        if (!reg)
+                goto out;
+
+        id = *reg;
+out:
+        of_node_put(np);
+        return id;
+}
+
+/* Must be called when no change can occur to cpu_present_map,
+ * i.e. during cpu online or offline.
+ */
+static struct device_node *cpu_to_l2cache(int cpu)
+{
+        struct device_node *np;
+        const phandle *php;
+        phandle ph;
+
+        if (!cpu_present(cpu))
+                return NULL;
+
+        np = of_get_cpu_node(cpu, NULL);
+        if (np == NULL)
+                return NULL;
+
+        php = of_get_property(np, "l2-cache", NULL);
+        if (php == NULL)
+                return NULL;
+        ph = *php;
+        of_node_put(np);
+
+        return of_find_node_by_phandle(ph);
+}
 
 /* Activate a secondary processor. */
 int __devinit start_secondary(void *unused)
 {
         unsigned int cpu = smp_processor_id();
+        struct device_node *l2_cache;
+        int i, base;
 
         atomic_inc(&init_mm.mm_count);
         current->active_mm = &init_mm;
@@ -400,6 +454,33 @@ int __devinit start_secondary(void *unused)
 
         ipi_call_lock();
         cpu_set(cpu, cpu_online_map);
+        /* Update sibling maps */
+        base = cpu_first_thread_in_core(cpu);
+        for (i = 0; i < threads_per_core; i++) {
+                if (cpu_is_offline(base + i))
+                        continue;
+                cpu_set(cpu, per_cpu(cpu_sibling_map, base + i));
+                cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
+
+                /* cpu_core_map should be a superset of
+                 * cpu_sibling_map even if we don't have cache
+                 * information, so update the former here, too.
+                 */
+                cpu_set(cpu, per_cpu(cpu_core_map, base +i));
+                cpu_set(base + i, per_cpu(cpu_core_map, cpu));
+        }
+        l2_cache = cpu_to_l2cache(cpu);
+        for_each_online_cpu(i) {
+                struct device_node *np = cpu_to_l2cache(i);
+                if (!np)
+                        continue;
+                if (np == l2_cache) {
+                        cpu_set(cpu, per_cpu(cpu_core_map, i));
+                        cpu_set(i, per_cpu(cpu_core_map, cpu));
+                }
+                of_node_put(np);
+        }
+        of_node_put(l2_cache);
         ipi_call_unlock();
 
         local_irq_enable();
@@ -437,10 +518,42 @@ void __init smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_HOTPLUG_CPU
 int __cpu_disable(void)
 {
-        if (smp_ops->cpu_disable)
-                return smp_ops->cpu_disable();
+        struct device_node *l2_cache;
+        int cpu = smp_processor_id();
+        int base, i;
+        int err;
 
-        return -ENOSYS;
+        if (!smp_ops->cpu_disable)
+                return -ENOSYS;
+
+        err = smp_ops->cpu_disable();
+        if (err)
+                return err;
+
+        /* Update sibling maps */
+        base = cpu_first_thread_in_core(cpu);
+        for (i = 0; i < threads_per_core; i++) {
+                cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i));
+                cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu));
+                cpu_clear(cpu, per_cpu(cpu_core_map, base +i));
+                cpu_clear(base + i, per_cpu(cpu_core_map, cpu));
+        }
+
+        l2_cache = cpu_to_l2cache(cpu);
+        for_each_present_cpu(i) {
+                struct device_node *np = cpu_to_l2cache(i);
+                if (!np)
+                        continue;
+                if (np == l2_cache) {
+                        cpu_clear(cpu, per_cpu(cpu_core_map, i));
+                        cpu_clear(i, per_cpu(cpu_core_map, cpu));
+                }
+                of_node_put(np);
+        }
+        of_node_put(l2_cache);
+
+
+        return 0;
 }
 
 void __cpu_die(unsigned int cpu)
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index 071bee3ec749..b0dbb1daa4df 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
-#include <linux/module.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 
@@ -59,6 +58,6 @@ EXPORT_SYMBOL_GPL(save_stack_trace);
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
-        save_context_stack(trace, tsk->thread.regs->gpr[1], tsk, 0);
+        save_context_stack(trace, tsk->thread.ksp, tsk, 0);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/powerpc/kernel/suspend.c b/arch/powerpc/kernel/suspend.c
index 8cee57107541..6fc6328dc626 100644
--- a/arch/powerpc/kernel/suspend.c
+++ b/arch/powerpc/kernel/suspend.c
@@ -7,6 +7,7 @@
  * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
  */
 
+#include <linux/mm.h>
 #include <asm/page.h>
 
 /* References to section boundaries */
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index c8127f832df0..56d172d16e56 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -22,13 +22,17 @@
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
+static DEFINE_PER_CPU(struct kobject *, cache_toplevel);
+
 /* SMT stuff */
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
 /* Time in microseconds we delay before sleeping in the idle loop */
 DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
 
-static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
+static ssize_t store_smt_snooze_delay(struct sys_device *dev,
+                                      struct sysdev_attribute *attr,
+                                      const char *buf,
                                       size_t count)
 {
         struct cpu *cpu = container_of(dev, struct cpu, sysdev);
@@ -44,7 +48,9 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
         return count;
 }
 
-static ssize_t show_smt_snooze_delay(struct sys_device *dev, char *buf)
+static ssize_t show_smt_snooze_delay(struct sys_device *dev,
+                                     struct sysdev_attribute *attr,
+                                     char *buf)
 {
         struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
@@ -152,14 +158,17 @@ static unsigned long write_##NAME(unsigned long val) \
         mtspr(ADDRESS, val); \
         return 0; \
 } \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+                        struct sysdev_attribute *attr, \
+                        char *buf) \
 { \
         struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
         unsigned long val = run_on_cpu(cpu->sysdev.id, read_##NAME, 0); \
         return sprintf(buf, "%lx\n", val); \
 } \
 static ssize_t __used \
-        store_##NAME(struct sys_device *dev, const char *buf, size_t count) \
+        store_##NAME(struct sys_device *dev, struct sysdev_attribute *attr, \
+                        const char *buf, size_t count) \
 { \
         struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
         unsigned long val; \
@@ -290,8 +299,289 @@ static struct sysdev_attribute pa6t_attrs[] = {
 #endif /* CONFIG_DEBUG_KERNEL */
 };
 
+struct cache_desc {
+        struct kobject kobj;
+        struct cache_desc *next;
+        const char *type;       /* Instruction, Data, or Unified */
+        u32 size;               /* total cache size in KB */
+        u32 line_size;          /* in bytes */
+        u32 nr_sets;            /* number of sets */
+        u32 level;              /* e.g. 1, 2, 3... */
+        u32 associativity;      /* e.g. 8-way... 0 is fully associative */
+};
+
+DEFINE_PER_CPU(struct cache_desc *, cache_desc);
+
+static struct cache_desc *kobj_to_cache_desc(struct kobject *k)
+{
+        return container_of(k, struct cache_desc, kobj);
+}
+
+static void cache_desc_release(struct kobject *k)
+{
+        struct cache_desc *desc = kobj_to_cache_desc(k);
+
+        pr_debug("%s: releasing %s\n", __func__, kobject_name(k));
+
+        if (desc->next)
+                kobject_put(&desc->next->kobj);
+
+        kfree(kobj_to_cache_desc(k));
+}
+
+static ssize_t cache_desc_show(struct kobject *k, struct attribute *attr, char *buf)
+{
+        struct kobj_attribute *kobj_attr;
+
+        kobj_attr = container_of(attr, struct kobj_attribute, attr);
+
+        return kobj_attr->show(k, kobj_attr, buf);
+}
+
+static struct sysfs_ops cache_desc_sysfs_ops = {
+        .show = cache_desc_show,
+};
+
+static struct kobj_type cache_desc_type = {
+        .release = cache_desc_release,
+        .sysfs_ops = &cache_desc_sysfs_ops,
+};
+
+static ssize_t cache_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%uK\n", cache->size);
+}
+
+static struct kobj_attribute cache_size_attr =
+        __ATTR(size, 0444, cache_size_show, NULL);
+
+static ssize_t cache_line_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%u\n", cache->line_size);
+}
+
+static struct kobj_attribute cache_line_size_attr =
+        __ATTR(coherency_line_size, 0444, cache_line_size_show, NULL);
+
+static ssize_t cache_nr_sets_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%u\n", cache->nr_sets);
+}
+
+static struct kobj_attribute cache_nr_sets_attr =
+        __ATTR(number_of_sets, 0444, cache_nr_sets_show, NULL);
+
+static ssize_t cache_type_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%s\n", cache->type);
+}
+
+static struct kobj_attribute cache_type_attr =
+        __ATTR(type, 0444, cache_type_show, NULL);
+
+static ssize_t cache_level_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%u\n", cache->level);
+}
+
+static struct kobj_attribute cache_level_attr =
+        __ATTR(level, 0444, cache_level_show, NULL);
+
+static ssize_t cache_assoc_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%u\n", cache->associativity);
+}
+
+static struct kobj_attribute cache_assoc_attr =
+        __ATTR(ways_of_associativity, 0444, cache_assoc_show, NULL);
+
+struct cache_desc_info {
+        const char *type;
+        const char *size_prop;
+        const char *line_size_prop;
+        const char *nr_sets_prop;
+};
+
+/* PowerPC Processor binding says the [di]-cache-* must be equal on
+ * unified caches, so just use d-cache properties. */
+static struct cache_desc_info ucache_info = {
+        .type = "Unified",
+        .size_prop = "d-cache-size",
+        .line_size_prop = "d-cache-line-size",
+        .nr_sets_prop = "d-cache-sets",
+};
 
-static void register_cpu_online(unsigned int cpu)
+static struct cache_desc_info dcache_info = {
+        .type = "Data",
+        .size_prop = "d-cache-size",
+        .line_size_prop = "d-cache-line-size",
+        .nr_sets_prop = "d-cache-sets",
+};
+
+static struct cache_desc_info icache_info = {
+        .type = "Instruction",
+        .size_prop = "i-cache-size",
+        .line_size_prop = "i-cache-line-size",
+        .nr_sets_prop = "i-cache-sets",
+};
+
+static struct cache_desc * __cpuinit create_cache_desc(struct device_node *np, struct kobject *parent, int index, int level, struct cache_desc_info *info)
+{
+        const u32 *cache_line_size;
+        struct cache_desc *new;
+        const u32 *cache_size;
+        const u32 *nr_sets;
+        int rc;
+
+        new = kzalloc(sizeof(*new), GFP_KERNEL);
+        if (!new)
+                return NULL;
+
+        rc = kobject_init_and_add(&new->kobj, &cache_desc_type, parent,
+                                  "index%d", index);
+        if (rc)
+                goto err;
+
+        /* type */
+        new->type = info->type;
+        rc = sysfs_create_file(&new->kobj, &cache_type_attr.attr);
+        WARN_ON(rc);
+
+        /* level */
+        new->level = level;
+        rc = sysfs_create_file(&new->kobj, &cache_level_attr.attr);
+        WARN_ON(rc);
+
+        /* size */
+        cache_size = of_get_property(np, info->size_prop, NULL);
+        if (cache_size) {
+                new->size = *cache_size / 1024;
+                rc = sysfs_create_file(&new->kobj,
+                                       &cache_size_attr.attr);
+                WARN_ON(rc);
+        }
+
+        /* coherency_line_size */
+        cache_line_size = of_get_property(np, info->line_size_prop, NULL);
+        if (cache_line_size) {
+                new->line_size = *cache_line_size;
+                rc = sysfs_create_file(&new->kobj,
+                                       &cache_line_size_attr.attr);
+                WARN_ON(rc);
+        }
+
+        /* number_of_sets */
+        nr_sets = of_get_property(np, info->nr_sets_prop, NULL);
+        if (nr_sets) {
+                new->nr_sets = *nr_sets;
+                rc = sysfs_create_file(&new->kobj,
+                                       &cache_nr_sets_attr.attr);
+                WARN_ON(rc);
+        }
+
+        /* ways_of_associativity */
+        if (new->nr_sets == 1) {
+                /* fully associative */
+                new->associativity = 0;
+                goto create_assoc;
+        }
+
+        if (new->nr_sets && new->size && new->line_size) {
+                /* If we have values for all of these we can derive
+                 * the associativity. */
+                new->associativity =
+                        ((new->size * 1024) / new->nr_sets) / new->line_size;
+create_assoc:
+                rc = sysfs_create_file(&new->kobj,
+                                       &cache_assoc_attr.attr);
+                WARN_ON(rc);
+        }
+
+        return new;
+err:
+        kfree(new);
+        return NULL;
+}
+
+static bool cache_is_unified(struct device_node *np)
+{
+        return of_get_property(np, "cache-unified", NULL);
+}
+
+static struct cache_desc * __cpuinit create_cache_index_info(struct device_node *np, struct kobject *parent, int index, int level)
+{
+        const phandle *next_cache_phandle;
+        struct device_node *next_cache;
+        struct cache_desc *new, **end;
+
+        pr_debug("%s(node = %s, index = %d)\n", __func__, np->full_name, index);
+
+        if (cache_is_unified(np)) {
+                new = create_cache_desc(np, parent, index, level,
+                                        &ucache_info);
+        } else {
+                new = create_cache_desc(np, parent, index, level,
+                                        &dcache_info);
+                if (new) {
+                        index++;
+                        new->next = create_cache_desc(np, parent, index, level,
+                                                      &icache_info);
+                }
+        }
+        if (!new)
+                return NULL;
+
+        end = &new->next;
+        while (*end)
+                end = &(*end)->next;
+
+        next_cache_phandle = of_get_property(np, "l2-cache", NULL);
+        if (!next_cache_phandle)
+                goto out;
+
+        next_cache = of_find_node_by_phandle(*next_cache_phandle);
+        if (!next_cache)
+                goto out;
+
+        *end = create_cache_index_info(next_cache, parent, ++index, ++level);
+
+        of_node_put(next_cache);
+out:
+        return new;
+}
+
+static void __cpuinit create_cache_info(struct sys_device *sysdev)
+{
+        struct kobject *cache_toplevel;
+        struct device_node *np = NULL;
+        int cpu = sysdev->id;
+
+        cache_toplevel = kobject_create_and_add("cache", &sysdev->kobj);
+        if (!cache_toplevel)
+                return;
+        per_cpu(cache_toplevel, cpu) = cache_toplevel;
+        np = of_get_cpu_node(cpu, NULL);
+        if (np != NULL) {
+                per_cpu(cache_desc, cpu) =
+                        create_cache_index_info(np, cache_toplevel, 0, 1);
+                of_node_put(np);
+        }
+        return;
+}
+
+static void __cpuinit register_cpu_online(unsigned int cpu)
 {
         struct cpu *c = &per_cpu(cpu_devices, cpu);
         struct sys_device *s = &c->sysdev;
@@ -339,9 +629,33 @@ static void register_cpu_online(unsigned int cpu)
 
         if (cpu_has_feature(CPU_FTR_DSCR))
                 sysdev_create_file(s, &attr_dscr);
+
+        create_cache_info(s);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+static void remove_cache_info(struct sys_device *sysdev)
+{
+        struct kobject *cache_toplevel;
+        struct cache_desc *cache_desc;
+        int cpu = sysdev->id;
+
+        cache_desc = per_cpu(cache_desc, cpu);
+        if (cache_desc != NULL) {
+                sysfs_remove_file(&cache_desc->kobj, &cache_size_attr.attr);
+                sysfs_remove_file(&cache_desc->kobj, &cache_line_size_attr.attr);
+                sysfs_remove_file(&cache_desc->kobj, &cache_type_attr.attr);
+                sysfs_remove_file(&cache_desc->kobj, &cache_level_attr.attr);
+                sysfs_remove_file(&cache_desc->kobj, &cache_nr_sets_attr.attr);
+                sysfs_remove_file(&cache_desc->kobj, &cache_assoc_attr.attr);
+
+                kobject_put(&cache_desc->kobj);
+        }
+        cache_toplevel = per_cpu(cache_toplevel, cpu);
+        if (cache_toplevel != NULL)
+                kobject_put(cache_toplevel);
+}
+
 static void unregister_cpu_online(unsigned int cpu)
 {
         struct cpu *c = &per_cpu(cpu_devices, cpu);
@@ -392,6 +706,8 @@ static void unregister_cpu_online(unsigned int cpu)
 
         if (cpu_has_feature(CPU_FTR_DSCR))
                 sysdev_remove_file(s, &attr_dscr);
+
+        remove_cache_info(s);
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -522,7 +838,8 @@ static void register_nodes(void)
 #endif
 
 /* Only valid if CPU is present. */
-static ssize_t show_physical_id(struct sys_device *dev, char *buf)
+static ssize_t show_physical_id(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 878fbddb6ae1..81ccb8dd1a54 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1067,6 +1067,22 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
                 }
 
                 _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+        } else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
+                regs->msr &= ~MSR_DE;
+
+                if (user_mode(regs)) {
+                        current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W |
+                                                                DBCR0_IDM);
+                } else {
+                        /* Disable DAC interupts */
+                        mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R |
+                                                DBSR_DAC1W | DBCR0_IDM));
+
+                        /* Clear the DAC event */
+                        mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W));
+                }
+                /* Setup and send the trap to the handler */
+                do_dabr(regs, mfspr(SPRN_DAC1), debug_status);
         }
 }
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index b77f8af7ddde..22a3c33fd751 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1,11 +1,12 @@
 /*
  * IBM PowerPC Virtual I/O Infrastructure Support.
  *
- *    Copyright (c) 2003-2005 IBM Corp.
+ *    Copyright (c) 2003,2008 IBM Corp.
  *     Dave Engebretsen engebret@us.ibm.com
  *     Santiago Leon santil@us.ibm.com
  *     Hollis Blanchard <hollisb@us.ibm.com>
  *     Stephen Rothwell
+ *     Robert Jennings <rcjenn@us.ibm.com>
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -46,6 +47,996 @@ static struct vio_dev vio_bus_device  = { /* fake "parent" device */
         .dev.bus = &vio_bus_type,
 };
 
+#ifdef CONFIG_PPC_SMLPAR
+/**
+ * vio_cmo_pool - A pool of IO memory for CMO use
+ *
+ * @size: The size of the pool in bytes
+ * @free: The amount of free memory in the pool
+ */
+struct vio_cmo_pool {
+        size_t size;
+        size_t free;
+};
+
+/* How many ms to delay queued balance work */
+#define VIO_CMO_BALANCE_DELAY 100
+
+/* Portion out IO memory to CMO devices by this chunk size */
+#define VIO_CMO_BALANCE_CHUNK 131072
+
+/**
+ * vio_cmo_dev_entry - A device that is CMO-enabled and requires entitlement
+ *
+ * @vio_dev: struct vio_dev pointer
+ * @list: pointer to other devices on bus that are being tracked
+ */
+struct vio_cmo_dev_entry {
+        struct vio_dev *viodev;
+        struct list_head list;
+};
+
+/**
+ * vio_cmo - VIO bus accounting structure for CMO entitlement
+ *
+ * @lock: spinlock for entire structure
+ * @balance_q: work queue for balancing system entitlement
+ * @device_list: list of CMO-enabled devices requiring entitlement
+ * @entitled: total system entitlement in bytes
+ * @reserve: pool of memory from which devices reserve entitlement, incl. spare
+ * @excess: pool of excess entitlement not needed for device reserves or spare
+ * @spare: IO memory for device hotplug functionality
+ * @min: minimum necessary for system operation
+ * @desired: desired memory for system operation
+ * @curr: bytes currently allocated
+ * @high: high water mark for IO data usage
+ */
+struct vio_cmo {
+        spinlock_t lock;
+        struct delayed_work balance_q;
+        struct list_head device_list;
+        size_t entitled;
+        struct vio_cmo_pool reserve;
+        struct vio_cmo_pool excess;
+        size_t spare;
+        size_t min;
+        size_t desired;
+        size_t curr;
+        size_t high;
+} vio_cmo;
+
+/**
+ * vio_cmo_OF_devices - Count the number of OF devices that have DMA windows
+ */
+static int vio_cmo_num_OF_devs(void)
+{
+        struct device_node *node_vroot;
+        int count = 0;
+
+        /*
+         * Count the number of vdevice entries with an
+         * ibm,my-dma-window OF property
+         */
+        node_vroot = of_find_node_by_name(NULL, "vdevice");
+        if (node_vroot) {
+                struct device_node *of_node;
+                struct property *prop;
+
+                for_each_child_of_node(node_vroot, of_node) {
+                        prop = of_find_property(of_node, "ibm,my-dma-window",
+                                               NULL);
+                        if (prop)
+                                count++;
+                }
+        }
+        of_node_put(node_vroot);
+        return count;
+}
+
+/**
+ * vio_cmo_alloc - allocate IO memory for CMO-enable devices
+ *
+ * @viodev: VIO device requesting IO memory
+ * @size: size of allocation requested
+ *
+ * Allocations come from memory reserved for the devices and any excess
+ * IO memory available to all devices.  The spare pool used to service
+ * hotplug must be equal to %VIO_CMO_MIN_ENT for the excess pool to be
+ * made available.
+ *
+ * Return codes:
+ *  0 for successful allocation and -ENOMEM for a failure
+ */
+static inline int vio_cmo_alloc(struct vio_dev *viodev, size_t size)
+{
+        unsigned long flags;
+        size_t reserve_free = 0;
+        size_t excess_free = 0;
+        int ret = -ENOMEM;
+
+        spin_lock_irqsave(&vio_cmo.lock, flags);
+
+        /* Determine the amount of free entitlement available in reserve */
+        if (viodev->cmo.entitled > viodev->cmo.allocated)
+                reserve_free = viodev->cmo.entitled - viodev->cmo.allocated;
+
+        /* If spare is not fulfilled, the excess pool can not be used. */
+        if (vio_cmo.spare >= VIO_CMO_MIN_ENT)
+                excess_free = vio_cmo.excess.free;
+
+        /* The request can be satisfied */
+        if ((reserve_free + excess_free) >= size) {
+                vio_cmo.curr += size;
+                if (vio_cmo.curr > vio_cmo.high)
+                        vio_cmo.high = vio_cmo.curr;
+                viodev->cmo.allocated += size;
+                size -= min(reserve_free, size);
+                vio_cmo.excess.free -= size;
+                ret = 0;
+        }
+
+        spin_unlock_irqrestore(&vio_cmo.lock, flags);
+        return ret;
+}
+
+/**
+ * vio_cmo_dealloc - deallocate IO memory from CMO-enable devices
+ * @viodev: VIO device freeing IO memory
+ * @size: size of deallocation
+ *
+ * IO memory is freed by the device back to the correct memory pools.
+ * The spare pool is replenished first from either memory pool, then
+ * the reserve pool is used to reduce device entitlement, the excess
+ * pool is used to increase the reserve pool toward the desired entitlement
+ * target, and then the remaining memory is returned to the pools.
+ *
+ */
+static inline void vio_cmo_dealloc(struct vio_dev *viodev, size_t size)
+{
+        unsigned long flags;
+        size_t spare_needed = 0;
+        size_t excess_freed = 0;
+        size_t reserve_freed = size;
+        size_t tmp;
+        int balance = 0;
+
+        spin_lock_irqsave(&vio_cmo.lock, flags);
+        vio_cmo.curr -= size;
+
+        /* Amount of memory freed from the excess pool */
+        if (viodev->cmo.allocated > viodev->cmo.entitled) {
+                excess_freed = min(reserve_freed, (viodev->cmo.allocated -
+                                                   viodev->cmo.entitled));
+                reserve_freed -= excess_freed;
+        }
+
+        /* Remove allocation from device */
+        viodev->cmo.allocated -= (reserve_freed + excess_freed);
+
+        /* Spare is a subset of the reserve pool, replenish it first. */
+        spare_needed = VIO_CMO_MIN_ENT - vio_cmo.spare;
+
+        /*
+         * Replenish the spare in the reserve pool from the excess pool.
+         * This moves entitlement into the reserve pool.
+         */
+        if (spare_needed && excess_freed) {
+                tmp = min(excess_freed, spare_needed);
+                vio_cmo.excess.size -= tmp;
+                vio_cmo.reserve.size += tmp;
+                vio_cmo.spare += tmp;
+                excess_freed -= tmp;
+                spare_needed -= tmp;
+                balance = 1;
+        }
+
+        /*
+         * Replenish the spare in the reserve pool from the reserve pool.
+         * This removes entitlement from the device down to VIO_CMO_MIN_ENT,
+         * if needed, and gives it to the spare pool. The amount of used
+         * memory in this pool does not change.
+         */
+        if (spare_needed && reserve_freed) {
+                tmp = min(spare_needed, min(reserve_freed,
+                                            (viodev->cmo.entitled -
+                                             VIO_CMO_MIN_ENT)));
+
+                vio_cmo.spare += tmp;
+                viodev->cmo.entitled -= tmp;
+                reserve_freed -= tmp;
+                spare_needed -= tmp;
+                balance = 1;
+        }
+
+        /*
+         * Increase the reserve pool until the desired allocation is met.
+         * Move an allocation freed from the excess pool into the reserve
+         * pool and schedule a balance operation.
+         */
+        if (excess_freed && (vio_cmo.desired > vio_cmo.reserve.size)) {
+                tmp = min(excess_freed, (vio_cmo.desired - vio_cmo.reserve.size));
+
+                vio_cmo.excess.size -= tmp;
+                vio_cmo.reserve.size += tmp;
+                excess_freed -= tmp;
+                balance = 1;
+        }
+
+        /* Return memory from the excess pool to that pool */
+        if (excess_freed)
+                vio_cmo.excess.free += excess_freed;
+
+        if (balance)
+                schedule_delayed_work(&vio_cmo.balance_q, VIO_CMO_BALANCE_DELAY);
+        spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_entitlement_update - Manage system entitlement changes
+ *
+ * @new_entitlement: new system entitlement to attempt to accommodate
+ *
+ * Increases in entitlement will be used to fulfill the spare entitlement
+ * and the rest is given to the excess pool.  Decreases, if they are
+ * possible, come from the excess pool and from unused device entitlement
+ *
+ * Returns: 0 on success, -ENOMEM when change can not be made
+ */
+int vio_cmo_entitlement_update(size_t new_entitlement)
+{
+        struct vio_dev *viodev;
+        struct vio_cmo_dev_entry *dev_ent;
+        unsigned long flags;
+        size_t avail, delta, tmp;
+
+        spin_lock_irqsave(&vio_cmo.lock, flags);
+
+        /* Entitlement increases */
+        if (new_entitlement > vio_cmo.entitled) {
+                delta = new_entitlement - vio_cmo.entitled;
+
+                /* Fulfill spare allocation */
+                if (vio_cmo.spare < VIO_CMO_MIN_ENT) {
+                        tmp = min(delta, (VIO_CMO_MIN_ENT - vio_cmo.spare));
+                        vio_cmo.spare += tmp;
+                        vio_cmo.reserve.size += tmp;
+                        delta -= tmp;
+                }
+
+                /* Remaining new allocation goes to the excess pool */
+                vio_cmo.entitled += delta;
+                vio_cmo.excess.size += delta;
+                vio_cmo.excess.free += delta;
+
+                goto out;
+        }
+
+        /* Entitlement decreases */
+        delta = vio_cmo.entitled - new_entitlement;
+        avail = vio_cmo.excess.free;
+
+        /*
+         * Need to check how much unused entitlement each device can
+         * sacrifice to fulfill entitlement change.
+         */
+        list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+                if (avail >= delta)
+                        break;
+
+                viodev = dev_ent->viodev;
+                if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+                    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+                                avail += viodev->cmo.entitled -
+                                         max_t(size_t, viodev->cmo.allocated,
+                                               VIO_CMO_MIN_ENT);
+        }
+
+        if (delta <= avail) {
+                vio_cmo.entitled -= delta;
+
+                /* Take entitlement from the excess pool first */
+                tmp = min(vio_cmo.excess.free, delta);
+                vio_cmo.excess.size -= tmp;
+                vio_cmo.excess.free -= tmp;
+                delta -= tmp;
+
+                /*
+                 * Remove all but VIO_CMO_MIN_ENT bytes from devices
+                 * until entitlement change is served
+                 */
+                list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+                        if (!delta)
+                                break;
+
+                        viodev = dev_ent->viodev;
+                        tmp = 0;
+                        if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+                            (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+                                tmp = viodev->cmo.entitled -
+                                      max_t(size_t, viodev->cmo.allocated,
+                                            VIO_CMO_MIN_ENT);
+                        viodev->cmo.entitled -= min(tmp, delta);
+                        delta -= min(tmp, delta);
+                }
+        } else {
+                spin_unlock_irqrestore(&vio_cmo.lock, flags);
+                return -ENOMEM;
+        }
+
+out:
+        schedule_delayed_work(&vio_cmo.balance_q, 0);
+        spin_unlock_irqrestore(&vio_cmo.lock, flags);
+        return 0;
+}
+
+/**
+ * vio_cmo_balance - Balance entitlement among devices
+ *
+ * @work: work queue structure for this operation
+ *
+ * Any system entitlement above the minimum needed for devices, or
+ * already allocated to devices, can be distributed to the devices.
+ * The list of devices is iterated through to recalculate the desired
+ * entitlement level and to determine how much entitlement above the
+ * minimum entitlement is allocated to devices.
+ *
+ * Small chunks of the available entitlement are given to devices until
+ * their requirements are fulfilled or there is no entitlement left to give.
+ * Upon completion sizes of the reserve and excess pools are calculated.
+ *
+ * The system minimum entitlement level is also recalculated here.
+ * Entitlement will be reserved for devices even after vio_bus_remove to
+ * accommodate reloading the driver.  The OF tree is walked to count the
+ * number of devices present and this will remove entitlement for devices
+ * that have actually left the system after having vio_bus_remove called.
+ */
+static void vio_cmo_balance(struct work_struct *work)
+{
+        struct vio_cmo *cmo;
+        struct vio_dev *viodev;
+        struct vio_cmo_dev_entry *dev_ent;
+        unsigned long flags;
+        size_t avail = 0, level, chunk, need;
+        int devcount = 0, fulfilled;
+
+        cmo = container_of(work, struct vio_cmo, balance_q.work);
+
+        spin_lock_irqsave(&vio_cmo.lock, flags);
+
+        /* Calculate minimum entitlement and fulfill spare */
+        cmo->min = vio_cmo_num_OF_devs() * VIO_CMO_MIN_ENT;
+        BUG_ON(cmo->min > cmo->entitled);
+        cmo->spare = min_t(size_t, VIO_CMO_MIN_ENT, (cmo->entitled - cmo->min));
+        cmo->min += cmo->spare;
+        cmo->desired = cmo->min;
+
+        /*
+         * Determine how much entitlement is available and reset device
+         * entitlements
+         */
+        avail = cmo->entitled - cmo->spare;
+        list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+                viodev = dev_ent->viodev;
+                devcount++;
+                viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+                cmo->desired += (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+                avail -= max_t(size_t, viodev->cmo.allocated, VIO_CMO_MIN_ENT);
+        }
+
+        /*
+         * Having provided each device with the minimum entitlement, loop
+         * over the devices portioning out the remaining entitlement
+         * until there is nothing left.
+         */
+        level = VIO_CMO_MIN_ENT;
+        while (avail) {
+                fulfilled = 0;
+                list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+                        viodev = dev_ent->viodev;
+
+                        if (viodev->cmo.desired <= level) {
+                                fulfilled++;
+                                continue;
+                        }
+
+                        /*
+                         * Give the device up to VIO_CMO_BALANCE_CHUNK
+                         * bytes of entitlement, but do not exceed the
+                         * desired level of entitlement for the device.
+                         */
+                        chunk = min_t(size_t, avail, VIO_CMO_BALANCE_CHUNK);
+                        chunk = min(chunk, (viodev->cmo.desired -
+                                            viodev->cmo.entitled));
+                        viodev->cmo.entitled += chunk;
+
+                        /*
+                         * If the memory for this entitlement increase was
+                         * already allocated to the device it does not come
+                         * from the available pool being portioned out.
+                         */
+                        need = max(viodev->cmo.allocated, viodev->cmo.entitled)-
+                               max(viodev->cmo.allocated, level);
+                        avail -= need;
+
+                }
+                if (fulfilled == devcount)
+                        break;
+                level += VIO_CMO_BALANCE_CHUNK;
+        }
+
+        /* Calculate new reserve and excess pool sizes */
+        cmo->reserve.size = cmo->min;
+        cmo->excess.free = 0;
+        cmo->excess.size = 0;
+        need = 0;
+        list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+                viodev = dev_ent->viodev;
+                /* Calculated reserve size above the minimum entitlement */
+                if (viodev->cmo.entitled)
+                        cmo->reserve.size += (viodev->cmo.entitled -
+                                              VIO_CMO_MIN_ENT);
+                /* Calculated used excess entitlement */
+                if (viodev->cmo.allocated > viodev->cmo.entitled)
+                        need += viodev->cmo.allocated - viodev->cmo.entitled;
+        }
+        cmo->excess.size = cmo->entitled - cmo->reserve.size;
+        cmo->excess.free = cmo->excess.size - need;
+
+        cancel_delayed_work(container_of(work, struct delayed_work, work));
+        spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size,
+                                          dma_addr_t *dma_handle, gfp_t flag)
+{
+        struct vio_dev *viodev = to_vio_dev(dev);
+        void *ret;
+
+        if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+                atomic_inc(&viodev->cmo.allocs_failed);
+                return NULL;
+        }
+
+        ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag);
+        if (unlikely(ret == NULL)) {
+                vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+                atomic_inc(&viodev->cmo.allocs_failed);
+        }
+
+        return ret;
+}
+
+static void vio_dma_iommu_free_coherent(struct device *dev, size_t size,
+                                        void *vaddr, dma_addr_t dma_handle)
+{
+        struct vio_dev *viodev = to_vio_dev(dev);
+
+        dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle);
+
+        vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr,
+                                           size_t size,
+                                           enum dma_data_direction direction,
+                                           struct dma_attrs *attrs)
+{
+        struct vio_dev *viodev = to_vio_dev(dev);
+        dma_addr_t ret = DMA_ERROR_CODE;
+
+        if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+                atomic_inc(&viodev->cmo.allocs_failed);
+                return ret;
+        }
+
+        ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs);
+        if (unlikely(dma_mapping_error(dev, ret))) {
+                vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+                atomic_inc(&viodev->cmo.allocs_failed);
+        }
+
+        return ret;
+}
+
+static void vio_dma_iommu_unmap_single(struct device *dev,
+                dma_addr_t dma_handle, size_t size,
+                enum dma_data_direction direction,
+                struct dma_attrs *attrs)
+{
+        struct vio_dev *viodev = to_vio_dev(dev);
+
+        dma_iommu_ops.unmap_single(dev, dma_handle, size, direction, attrs);
+
+        vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
+                                int nelems, enum dma_data_direction direction,
+                                struct dma_attrs *attrs)
+{
+        struct vio_dev *viodev = to_vio_dev(dev);
+        struct scatterlist *sgl;
+        int ret, count = 0;
+        size_t alloc_size = 0;
+
+        for (sgl = sglist; count < nelems; count++, sgl++)
+                alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE);
+
+        if (vio_cmo_alloc(viodev, alloc_size)) {
+                atomic_inc(&viodev->cmo.allocs_failed);
+                return 0;
+        }
+
+        ret = dma_iommu_ops.map_sg(dev, sglist, nelems, direction, attrs);
+
+        if (unlikely(!ret)) {
+                vio_cmo_dealloc(viodev, alloc_size);
+                atomic_inc(&viodev->cmo.allocs_failed);
+        }
+
+        for (sgl = sglist, count = 0; count < ret; count++, sgl++)
+                alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+        if (alloc_size)
+                vio_cmo_dealloc(viodev, alloc_size);
+
+        return ret;
+}
+
+static void vio_dma_iommu_unmap_sg(struct device *dev,
+                struct scatterlist *sglist, int nelems,
+                enum dma_data_direction direction,
+                struct dma_attrs *attrs)
+{
+        struct vio_dev *viodev = to_vio_dev(dev);
+        struct scatterlist *sgl;
+        size_t alloc_size = 0;
+        int count = 0;
+
+        for (sgl = sglist; count < nelems; count++, sgl++)
+                alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+
+        dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs);
+
+        vio_cmo_dealloc(viodev, alloc_size);
+}
+
+struct dma_mapping_ops vio_dma_mapping_ops = {
+        .alloc_coherent = vio_dma_iommu_alloc_coherent,
+        .free_coherent  = vio_dma_iommu_free_coherent,
+        .map_single     = vio_dma_iommu_map_single,
+        .unmap_single   = vio_dma_iommu_unmap_single,
+        .map_sg         = vio_dma_iommu_map_sg,
+        .unmap_sg       = vio_dma_iommu_unmap_sg,
+};
+
+/**
+ * vio_cmo_set_dev_desired - Set desired entitlement for a device
+ *
+ * @viodev: struct vio_dev for device to alter
+ * @new_desired: new desired entitlement level in bytes
+ *
+ * For use by devices to request a change to their entitlement at runtime or
+ * through sysfs.  The desired entitlement level is changed and a balancing
+ * of system resources is scheduled to run in the future.
+ */
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired)
+{
+        unsigned long flags;
+        struct vio_cmo_dev_entry *dev_ent;
+        int found = 0;
+
+        if (!firmware_has_feature(FW_FEATURE_CMO))
+                return;
+
+        spin_lock_irqsave(&vio_cmo.lock, flags);
+        if (desired < VIO_CMO_MIN_ENT)
+                desired = VIO_CMO_MIN_ENT;
+
+        /*
+         * Changes will not be made for devices not in the device list.
+         * If it is not in the device list, then no driver is loaded
+         * for the device and it can not receive entitlement.
+         */
+        list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+                if (viodev == dev_ent->viodev) {
+                        found = 1;
+                        break;
+                }
+        if (!found)
+                return;
+
+        /* Increase/decrease in desired device entitlement */
+        if (desired >= viodev->cmo.desired) {
+                /* Just bump the bus and device values prior to a balance*/
+                vio_cmo.desired += desired - viodev->cmo.desired;
+                viodev->cmo.desired = desired;
+        } else {
+                /* Decrease bus and device values for desired entitlement */
+                vio_cmo.desired -= viodev->cmo.desired - desired;
+                viodev->cmo.desired = desired;
+                /*
+                 * If less entitlement is desired than current entitlement, move
+                 * any reserve memory in the change region to the excess pool.
+                 */
+                if (viodev->cmo.entitled > desired) {
+                        vio_cmo.reserve.size -= viodev->cmo.entitled - desired;
+                        vio_cmo.excess.size += viodev->cmo.entitled - desired;
+                        /*
+                         * If entitlement moving from the reserve pool to the
+                         * excess pool is currently unused, add to the excess
+                         * free counter.
+                         */
+                        if (viodev->cmo.allocated < viodev->cmo.entitled)
+                                vio_cmo.excess.free += viodev->cmo.entitled -
+                                                       max(viodev->cmo.allocated, desired);
+                        viodev->cmo.entitled = desired;
+                }
+        }
+        schedule_delayed_work(&vio_cmo.balance_q, 0);
+        spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_bus_probe - Handle CMO specific bus probe activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Determine the devices IO memory entitlement needs, attempting
+ * to satisfy the system minimum entitlement at first and scheduling
+ * a balance operation to take care of the rest at a later time.
+ *
+ * Returns: 0 on success, -EINVAL when device doesn't support CMO, and
+ *          -ENOMEM when entitlement is not available for device or
+ *          device entry.
+ *
+ */
+static int vio_cmo_bus_probe(struct vio_dev *viodev)
+{
+        struct vio_cmo_dev_entry *dev_ent;
+        struct device *dev = &viodev->dev;
+        struct vio_driver *viodrv = to_vio_driver(dev->driver);
+        unsigned long flags;
+        size_t size;
+
+        /*
+         * Check to see that device has a DMA window and configure
+         * entitlement for the device.
+         */
+        if (of_get_property(viodev->dev.archdata.of_node,
+                            "ibm,my-dma-window", NULL)) {
+                /* Check that the driver is CMO enabled and get desired DMA */
+                if (!viodrv->get_desired_dma) {
+                        dev_err(dev, "%s: device driver does not support CMO\n",
+                                __func__);
+                        return -EINVAL;
+                }
+
+                viodev->cmo.desired = IOMMU_PAGE_ALIGN(viodrv->get_desired_dma(viodev));
+                if (viodev->cmo.desired < VIO_CMO_MIN_ENT)
+                        viodev->cmo.desired = VIO_CMO_MIN_ENT;
+                size = VIO_CMO_MIN_ENT;
+
+                dev_ent = kmalloc(sizeof(struct vio_cmo_dev_entry),
+                                  GFP_KERNEL);
+                if (!dev_ent)
+                        return -ENOMEM;
+
+                dev_ent->viodev = viodev;
+                spin_lock_irqsave(&vio_cmo.lock, flags);
+                list_add(&dev_ent->list, &vio_cmo.device_list);
+        } else {
+                viodev->cmo.desired = 0;
+                size = 0;
+                spin_lock_irqsave(&vio_cmo.lock, flags);
+        }
+
+        /*
+         * If the needs for vio_cmo.min have not changed since they
+         * were last set, the number of devices in the OF tree has
+         * been constant and the IO memory for this is already in
+         * the reserve pool.
+         */
+        if (vio_cmo.min == ((vio_cmo_num_OF_devs() + 1) *
+                            VIO_CMO_MIN_ENT)) {
+                /* Updated desired entitlement if device requires it */
+                if (size)
+                        vio_cmo.desired += (viodev->cmo.desired -
+                                        VIO_CMO_MIN_ENT);
+        } else {
+                size_t tmp;
+
+                tmp = vio_cmo.spare + vio_cmo.excess.free;
+                if (tmp < size) {
+                        dev_err(dev, "%s: insufficient free "
+                                "entitlement to add device. "
+                                "Need %lu, have %lu\n", __func__,
+                                size, (vio_cmo.spare + tmp));
+                        spin_unlock_irqrestore(&vio_cmo.lock, flags);
+                        return -ENOMEM;
+                }
+
+                /* Use excess pool first to fulfill request */
+                tmp = min(size, vio_cmo.excess.free);
+                vio_cmo.excess.free -= tmp;
+                vio_cmo.excess.size -= tmp;
+                vio_cmo.reserve.size += tmp;
+
+                /* Use spare if excess pool was insufficient */
+                vio_cmo.spare -= size - tmp;
+
+                /* Update bus accounting */
+                vio_cmo.min += size;
+                vio_cmo.desired += viodev->cmo.desired;
+        }
+        spin_unlock_irqrestore(&vio_cmo.lock, flags);
+        return 0;
+}
+
+/**
+ * vio_cmo_bus_remove - Handle CMO specific bus removal activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Remove the device from the cmo device list.  The minimum entitlement
+ * will be reserved for the device as long as it is in the system.  The
+ * rest of the entitlement the device had been allocated will be returned
+ * to the system.
+ */
+static void vio_cmo_bus_remove(struct vio_dev *viodev)
+{
+        struct vio_cmo_dev_entry *dev_ent;
+        unsigned long flags;
+        size_t tmp;
+
+        spin_lock_irqsave(&vio_cmo.lock, flags);
+        if (viodev->cmo.allocated) {
+                dev_err(&viodev->dev, "%s: device had %lu bytes of IO "
+                        "allocated after remove operation.\n",
+                        __func__, viodev->cmo.allocated);
+                BUG();
+        }
+
+        /*
+         * Remove the device from the device list being maintained for
+         * CMO enabled devices.
+         */
+        list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+                if (viodev == dev_ent->viodev) {
+                        list_del(&dev_ent->list);
+                        kfree(dev_ent);
+                        break;
+                }
+
+        /*
+         * Devices may not require any entitlement and they do not need
+         * to be processed.  Otherwise, return the device's entitlement
+         * back to the pools.
+         */
+        if (viodev->cmo.entitled) {
+                /*
+                 * This device has not yet left the OF tree, it's
+                 * minimum entitlement remains in vio_cmo.min and
+                 * vio_cmo.desired
+                 */
+                vio_cmo.desired -= (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+
+                /*
+                 * Save min allocation for device in reserve as long
+                 * as it exists in OF tree as determined by later
+                 * balance operation
+                 */
+                viodev->cmo.entitled -= VIO_CMO_MIN_ENT;
+
+                /* Replenish spare from freed reserve pool */
+                if (viodev->cmo.entitled && (vio_cmo.spare < VIO_CMO_MIN_ENT)) {
+                        tmp = min(viodev->cmo.entitled, (VIO_CMO_MIN_ENT -
+                                                         vio_cmo.spare));
+                        vio_cmo.spare += tmp;
+                        viodev->cmo.entitled -= tmp;
+                }
+
+                /* Remaining reserve goes to excess pool */
+                vio_cmo.excess.size += viodev->cmo.entitled;
+                vio_cmo.excess.free += viodev->cmo.entitled;
+                vio_cmo.reserve.size -= viodev->cmo.entitled;
+
+                /*
+                 * Until the device is removed it will keep a
+                 * minimum entitlement; this will guarantee that
+                 * a module unload/load will result in a success.
+                 */
+                viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+                viodev->cmo.desired = VIO_CMO_MIN_ENT;
+                atomic_set(&viodev->cmo.allocs_failed, 0);
+        }
+
+        spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev)
+{
+        vio_dma_mapping_ops.dma_supported = dma_iommu_ops.dma_supported;
+        viodev->dev.archdata.dma_ops = &vio_dma_mapping_ops;
+}
+
+/**
+ * vio_cmo_bus_init - CMO entitlement initialization at bus init time
+ *
+ * Set up the reserve and excess entitlement pools based on available
+ * system entitlement and the number of devices in the OF tree that
+ * require entitlement in the reserve pool.
+ */
+static void vio_cmo_bus_init(void)
+{
+        struct hvcall_mpp_data mpp_data;
+        int err;
+
+        memset(&vio_cmo, 0, sizeof(struct vio_cmo));
+        spin_lock_init(&vio_cmo.lock);
+        INIT_LIST_HEAD(&vio_cmo.device_list);
+        INIT_DELAYED_WORK(&vio_cmo.balance_q, vio_cmo_balance);
+
+        /* Get current system entitlement */
+        err = h_get_mpp(&mpp_data);
+
+        /*
+         * On failure, continue with entitlement set to 0, will panic()
+         * later when spare is reserved.
+         */
+        if (err != H_SUCCESS) {
+                printk(KERN_ERR "%s: unable to determine system IO "\
+                       "entitlement. (%d)\n", __func__, err);
+                vio_cmo.entitled = 0;
+        } else {
+                vio_cmo.entitled = mpp_data.entitled_mem;
+        }
+
+        /* Set reservation and check against entitlement */
+        vio_cmo.spare = VIO_CMO_MIN_ENT;
+        vio_cmo.reserve.size = vio_cmo.spare;
+        vio_cmo.reserve.size += (vio_cmo_num_OF_devs() *
+                                 VIO_CMO_MIN_ENT);
+        if (vio_cmo.reserve.size > vio_cmo.entitled) {
+                printk(KERN_ERR "%s: insufficient system entitlement\n",
+                       __func__);
+                panic("%s: Insufficient system entitlement", __func__);
+        }
+
+        /* Set the remaining accounting variables */
+        vio_cmo.excess.size = vio_cmo.entitled - vio_cmo.reserve.size;
+        vio_cmo.excess.free = vio_cmo.excess.size;
+        vio_cmo.min = vio_cmo.reserve.size;
+        vio_cmo.desired = vio_cmo.reserve.size;
+}
+
+/* sysfs device functions and data structures for CMO */
+
+#define viodev_cmo_rd_attr(name)                                        \
+static ssize_t viodev_cmo_##name##_show(struct device *dev,             \
+                                        struct device_attribute *attr,  \
+                                         char *buf)                     \
+{                                                                       \
+        return sprintf(buf, "%lu\n", to_vio_dev(dev)->cmo.name);        \
+}
+
+static ssize_t viodev_cmo_allocs_failed_show(struct device *dev,
+                struct device_attribute *attr, char *buf)
+{
+        struct vio_dev *viodev = to_vio_dev(dev);
+        return sprintf(buf, "%d\n", atomic_read(&viodev->cmo.allocs_failed));
+}
+
+static ssize_t viodev_cmo_allocs_failed_reset(struct device *dev,
+                struct device_attribute *attr, const char *buf, size_t count)
+{
+        struct vio_dev *viodev = to_vio_dev(dev);
+        atomic_set(&viodev->cmo.allocs_failed, 0);
+        return count;
+}
+
+static ssize_t viodev_cmo_desired_set(struct device *dev,
+                struct device_attribute *attr, const char *buf, size_t count)
+{
+        struct vio_dev *viodev = to_vio_dev(dev);
+        size_t new_desired;
+        int ret;
+
+        ret = strict_strtoul(buf, 10, &new_desired);
+        if (ret)
+                return ret;
+
+        vio_cmo_set_dev_desired(viodev, new_desired);
+        return count;
+}
+
+viodev_cmo_rd_attr(desired);
+viodev_cmo_rd_attr(entitled);
+viodev_cmo_rd_attr(allocated);
+
+static ssize_t name_show(struct device *, struct device_attribute *, char *);
+static ssize_t devspec_show(struct device *, struct device_attribute *, char *);
+static struct device_attribute vio_cmo_dev_attrs[] = {
+        __ATTR_RO(name),
+        __ATTR_RO(devspec),
+        __ATTR(cmo_desired,       S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+               viodev_cmo_desired_show, viodev_cmo_desired_set),
+        __ATTR(cmo_entitled,      S_IRUGO, viodev_cmo_entitled_show,      NULL),
+        __ATTR(cmo_allocated,     S_IRUGO, viodev_cmo_allocated_show,     NULL),
+        __ATTR(cmo_allocs_failed, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+               viodev_cmo_allocs_failed_show, viodev_cmo_allocs_failed_reset),
+        __ATTR_NULL
+};
+
+/* sysfs bus functions and data structures for CMO */
+
+#define viobus_cmo_rd_attr(name)                                        \
+static ssize_t                                                          \
+viobus_cmo_##name##_show(struct bus_type *bt, char *buf)                \
+{                                                                       \
+        return sprintf(buf, "%lu\n", vio_cmo.name);                     \
+}
+
+#define viobus_cmo_pool_rd_attr(name, var)                              \
+static ssize_t                                                          \
+viobus_cmo_##name##_pool_show_##var(struct bus_type *bt, char *buf)     \
+{                                                                       \
+        return sprintf(buf, "%lu\n", vio_cmo.name.var);                 \
+}
+
+static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf,
+                                     size_t count)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(&vio_cmo.lock, flags);
+        vio_cmo.high = vio_cmo.curr;
+        spin_unlock_irqrestore(&vio_cmo.lock, flags);
+
+        return count;
+}
+
+viobus_cmo_rd_attr(entitled);
+viobus_cmo_pool_rd_attr(reserve, size);
+viobus_cmo_pool_rd_attr(excess, size);
+viobus_cmo_pool_rd_attr(excess, free);
+viobus_cmo_rd_attr(spare);
+viobus_cmo_rd_attr(min);
+viobus_cmo_rd_attr(desired);
+viobus_cmo_rd_attr(curr);
+viobus_cmo_rd_attr(high);
+
+static struct bus_attribute vio_cmo_bus_attrs[] = {
+        __ATTR(cmo_entitled, S_IRUGO, viobus_cmo_entitled_show, NULL),
+        __ATTR(cmo_reserve_size, S_IRUGO, viobus_cmo_reserve_pool_show_size, NULL),
+        __ATTR(cmo_excess_size, S_IRUGO, viobus_cmo_excess_pool_show_size, NULL),
+        __ATTR(cmo_excess_free, S_IRUGO, viobus_cmo_excess_pool_show_free, NULL),
+        __ATTR(cmo_spare,   S_IRUGO, viobus_cmo_spare_show,   NULL),
+        __ATTR(cmo_min,     S_IRUGO, viobus_cmo_min_show,     NULL),
+        __ATTR(cmo_desired, S_IRUGO, viobus_cmo_desired_show, NULL),
+        __ATTR(cmo_curr,    S_IRUGO, viobus_cmo_curr_show,    NULL),
+        __ATTR(cmo_high,    S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+               viobus_cmo_high_show, viobus_cmo_high_reset),
+        __ATTR_NULL
+};
+
+static void vio_cmo_sysfs_init(void)
+{
+        vio_bus_type.dev_attrs = vio_cmo_dev_attrs;
+        vio_bus_type.bus_attrs = vio_cmo_bus_attrs;
+}
+#else /* CONFIG_PPC_SMLPAR */
+/* Dummy functions for iSeries platform */
+int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; }
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {}
+static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; }
+static void vio_cmo_bus_remove(struct vio_dev *viodev) {}
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {}
+static void vio_cmo_bus_init(void) {}
+static void vio_cmo_sysfs_init(void) { }
+#endif /* CONFIG_PPC_SMLPAR */
+EXPORT_SYMBOL(vio_cmo_entitlement_update);
+EXPORT_SYMBOL(vio_cmo_set_dev_desired);
+
 static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 {
         const unsigned char *dma_window;
@@ -114,8 +1105,17 @@ static int vio_bus_probe(struct device *dev)
                 return error;
 
         id = vio_match_device(viodrv->id_table, viodev);
-        if (id)
+        if (id) {
+                memset(&viodev->cmo, 0, sizeof(viodev->cmo));
+                if (firmware_has_feature(FW_FEATURE_CMO)) {
+                        error = vio_cmo_bus_probe(viodev);
+                        if (error)
+                                return error;
+                }
                 error = viodrv->probe(viodev, id);
+                if (error)
+                        vio_cmo_bus_remove(viodev);
+        }
 
         return error;
 }
@@ -125,12 +1125,23 @@ static int vio_bus_remove(struct device *dev)
 {
         struct vio_dev *viodev = to_vio_dev(dev);
         struct vio_driver *viodrv = to_vio_driver(dev->driver);
+        struct device *devptr;
+        int ret = 1;
+
+        /*
+         * Hold a reference to the device after the remove function is called
+         * to allow for CMO accounting cleanup for the device.
+         */
+        devptr = get_device(dev);
 
         if (viodrv->remove)
-                return viodrv->remove(viodev);
+                ret = viodrv->remove(viodev);
+
+        if (!ret && firmware_has_feature(FW_FEATURE_CMO))
+                vio_cmo_bus_remove(viodev);
 
-        /* driver can't remove */
-        return 1;
+        put_device(devptr);
+        return ret;
 }
 
 /**
@@ -215,7 +1226,11 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
                         viodev->unit_address = *unit_address;
         }
         viodev->dev.archdata.of_node = of_node_get(of_node);
-        viodev->dev.archdata.dma_ops = &dma_iommu_ops;
+
+        if (firmware_has_feature(FW_FEATURE_CMO))
+                vio_cmo_set_dma_ops(viodev);
+        else
+                viodev->dev.archdata.dma_ops = &dma_iommu_ops;
         viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
         viodev->dev.archdata.numa_node = of_node_to_nid(of_node);
 
@@ -245,6 +1260,9 @@ static int __init vio_bus_init(void)
         int err;
         struct device_node *node_vroot;
 
+        if (firmware_has_feature(FW_FEATURE_CMO))
+                vio_cmo_sysfs_init();
+
         err = bus_register(&vio_bus_type);
         if (err) {
                 printk(KERN_ERR "failed to register VIO bus\n");
@@ -262,6 +1280,9 @@ static int __init vio_bus_init(void)
                 return err;
         }
 
+        if (firmware_has_feature(FW_FEATURE_CMO))
+                vio_cmo_bus_init();
+
         node_vroot = of_find_node_by_name(NULL, "vdevice");
         if (node_vroot) {
                 struct device_node *of_node;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 87a72c66ce27..4a8ce62fe112 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -9,6 +9,25 @@
 
 ENTRY(_stext)
 
+PHDRS {
+        kernel PT_LOAD FLAGS(7); /* RWX */
+        notes PT_NOTE FLAGS(0);
+        dummy PT_NOTE FLAGS(0);
+
+        /* binutils < 2.18 has a bug that makes it misbehave when taking an
+           ELF file with all segments at load address 0 as input.  This
+           happens when running "strip" on vmlinux, because of the AT() magic
+           in this linker script.  People using GCC >= 4.2 won't run into
+           this problem, because the "build-id" support will put some data
+           into the "notes" segment (at a non-zero load address).
+
+           To work around this, we force some data into both the "dummy"
+           segment and the kernel segment, so the dummy segment will get a
+           non-zero load address.  It's not enough to always create the
+           "notes" segment, since if nothing gets assigned to it, its load
+           address will be zero.  */
+}
+
 #ifdef CONFIG_PPC64
 OUTPUT_ARCH(powerpc:common64)
 jiffies = jiffies_64;
@@ -50,7 +69,7 @@ SECTIONS
                 . = ALIGN(PAGE_SIZE);
                 _etext = .;
                 PROVIDE32 (etext = .);
-        }
+        } :kernel
 
         /* Read-only data */
         RODATA
@@ -62,7 +81,13 @@ SECTIONS
                 __stop___ex_table = .;
         }
 
-        NOTES
+        NOTES :kernel :notes
+
+        /* The dummy segment contents for the bug workaround mentioned above
+           near PHDRS.  */
+        .dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
+                LONG(0xf177)
+        } :kernel :dummy
 
 /*
  * Init sections discarded at runtime
@@ -74,7 +99,7 @@ SECTIONS
                 _sinittext = .;
                 INIT_TEXT
                 _einittext = .;
-        }
+        } :kernel
 
         /* .exit.text is discarded at runtime, not link time,
          * to deal with references from __bug_table
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 75dff7cfa814..5a5602da5091 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -177,7 +177,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid,
                                                     vcpu->arch.msr & MSR_PR);
 }
 
-void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid)
+void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
+                           gva_t eend, u32 asid)
 {
         unsigned int pid = asid & 0xff;
         int i;
@@ -191,7 +192,7 @@ void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid)
                 if (!get_tlb_v(stlbe))
                         continue;
 
-                if (eaddr < get_tlb_eaddr(stlbe))
+                if (eend < get_tlb_eaddr(stlbe))
                         continue;
 
                 if (eaddr > get_tlb_end(stlbe))
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index d0d358d367ec..04e3449e1f42 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -4,7 +4,7 @@
 
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
 
 kvm-objs := $(common-objs) powerpc.o emulate.o booke_guest.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 000097461283..8c605d0a5488 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -137,7 +137,7 @@ static int kvmppc_emul_tlbwe(struct kvm_vcpu *vcpu, u32 inst)
         if (tlbe->word0 & PPC44x_TLB_VALID) {
                 eaddr = get_tlb_eaddr(tlbe);
                 asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid;
-                kvmppc_mmu_invalidate(vcpu, eaddr, asid);
+                kvmppc_mmu_invalidate(vcpu, eaddr, get_tlb_end(tlbe), asid);
         }
 
         switch (ws) {
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 777e0f34e0ea..53826a5f6c06 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -145,6 +145,9 @@ int kvm_dev_ioctl_check_extension(long ext)
         case KVM_CAP_USER_MEMORY:
                 r = 1;
                 break;
+        case KVM_CAP_COALESCED_MMIO:
+                r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+                break;
         default:
                 r = 0;
                 break;
@@ -167,6 +170,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
         return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
+
 struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 {
         struct kvm_vcpu *vcpu;
@@ -240,10 +247,6 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
 }
 
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
                                     struct kvm_debug_guest *dbg)
 {
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
index 0559fe086eb4..7c975d43e3f3 100644
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <asm/page.h>
 #include <asm/code-patching.h>
 
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 4e43702b9813..8c5a03be31e0 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -99,7 +99,7 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 
         for (; fcur < fend; fcur++) {
                 if (patch_feature_section(value, fcur)) {
-                        __WARN();
+                        WARN_ON(1);
                         printk("Unable to patch feature section at %p - %p" \
                                 " with %p - %p\n",
                                 calc_addr(fcur, fcur->start_off),
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index 49eb1f1a2bb4..64e2e499e32a 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -13,13 +13,7 @@
 #include <asm/ppc_asm.h>
 
         .section __ex_table,"a"
-#ifdef CONFIG_PPC64
-        .align  3
-#define EXTBL   .llong
-#else
-        .align  2
-#define EXTBL   .long
-#endif
+        PPC_LONG_ALIGN
         .text
         
 _GLOBAL(strcpy)
@@ -160,9 +154,9 @@ _GLOBAL(__clear_user)
         blr
 
         .section __ex_table,"a"
-        EXTBL   11b,90b
-        EXTBL   1b,91b
-        EXTBL   8b,92b
+        PPC_LONG        11b,90b
+        PPC_LONG        1b,91b
+        PPC_LONG        8b,92b
         .text
 
 _GLOBAL(__strncpy_from_user)
@@ -183,7 +177,7 @@ _GLOBAL(__strncpy_from_user)
         blr
 
         .section __ex_table,"a"
-        EXTBL   1b,99b
+        PPC_LONG        1b,99b
         .text
 
 /* r3 = str, r4 = len (> 0), r5 = top (highest addr) */
@@ -208,4 +202,4 @@ _GLOBAL(__strnlen_user)
         blr
 
         .section __ex_table,"a"
-        EXTBL   1b,99b
+        PPC_LONG        1b,99b
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 1707d00331fc..565b7a237c84 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -100,31 +100,6 @@ static int store_updates_sp(struct pt_regs *regs)
         return 0;
 }
 
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-static void do_dabr(struct pt_regs *regs, unsigned long address,
-                    unsigned long error_code)
-{
-        siginfo_t info;
-
-        if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
-                        11, SIGSEGV) == NOTIFY_STOP)
-                return;
-
-        if (debugger_dabr_match(regs))
-                return;
-
-        /* Clear the DABR */
-        set_dabr(0);
-
-        /* Deliver the signal to userspace */
-        info.si_signo = SIGTRAP;
-        info.si_errno = 0;
-        info.si_code = TRAP_HWBKPT;
-        info.si_addr = (void __user *)address;
-        force_sig_info(SIGTRAP, &info, current);
-}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-
 /*
  * For 600- and 800-family processors, the error_code parameter is DSISR
  * for a data fault, SRR1 for an instruction fault. For 400-family processors
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 8d3b58ebd38e..5ce5a4dcd008 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -68,6 +68,7 @@
 
 #define KB (1024)
 #define MB (1024*KB)
+#define GB (1024L*MB)
 
 /*
  * Note:  pte   --> Linux PTE
@@ -102,7 +103,6 @@ int mmu_kernel_ssize = MMU_SEGSIZE_256M;
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
 u16 mmu_slb_size = 64;
 #ifdef CONFIG_HUGETLB_PAGE
-int mmu_huge_psize = MMU_PAGE_16M;
 unsigned int HPAGE_SHIFT;
 #endif
 #ifdef CONFIG_PPC_64K_PAGES
@@ -329,6 +329,44 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,
         return 0;
 }
 
+/* Scan for 16G memory blocks that have been set aside for huge pages
+ * and reserve those blocks for 16G huge pages.
+ */
+static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
+                                        const char *uname, int depth,
+                                        void *data) {
+        char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+        unsigned long *addr_prop;
+        u32 *page_count_prop;
+        unsigned int expected_pages;
+        long unsigned int phys_addr;
+        long unsigned int block_size;
+
+        /* We are scanning "memory" nodes only */
+        if (type == NULL || strcmp(type, "memory") != 0)
+                return 0;
+
+        /* This property is the log base 2 of the number of virtual pages that
+         * will represent this memory block. */
+        page_count_prop = of_get_flat_dt_prop(node, "ibm,expected#pages", NULL);
+        if (page_count_prop == NULL)
+                return 0;
+        expected_pages = (1 << page_count_prop[0]);
+        addr_prop = of_get_flat_dt_prop(node, "reg", NULL);
+        if (addr_prop == NULL)
+                return 0;
+        phys_addr = addr_prop[0];
+        block_size = addr_prop[1];
+        if (block_size != (16 * GB))
+                return 0;
+        printk(KERN_INFO "Huge page(16GB) memory: "
+                        "addr = 0x%lX size = 0x%lX pages = %d\n",
+                        phys_addr, block_size, expected_pages);
+        lmb_reserve(phys_addr, block_size * expected_pages);
+        add_gpage(phys_addr, block_size, expected_pages);
+        return 0;
+}
+
 static void __init htab_init_page_sizes(void)
 {
         int rc;
@@ -418,15 +456,18 @@ static void __init htab_init_page_sizes(void)
                );
 
 #ifdef CONFIG_HUGETLB_PAGE
-        /* Init large page size. Currently, we pick 16M or 1M depending
+        /* Reserve 16G huge page memory sections for huge pages */
+        of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL);
+
+/* Set default large page size. Currently, we pick 16M or 1M depending
          * on what is available
          */
         if (mmu_psize_defs[MMU_PAGE_16M].shift)
-                set_huge_psize(MMU_PAGE_16M);
+                HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
         /* With 4k/4level pagetables, we can't (for now) cope with a
          * huge page size < PMD_SIZE */
         else if (mmu_psize_defs[MMU_PAGE_1M].shift)
-                set_huge_psize(MMU_PAGE_1M);
+                HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
 #endif /* CONFIG_HUGETLB_PAGE */
 }
 
@@ -847,7 +888,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 
 #ifdef CONFIG_HUGETLB_PAGE
         /* Handle hugepage regions */
-        if (HPAGE_SHIFT && psize == mmu_huge_psize) {
+        if (HPAGE_SHIFT && mmu_huge_psizes[psize]) {
                 DBG_LOW(" -> huge page !\n");
                 return hash_huge_page(mm, access, ea, vsid, local, trap);
         }
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 0d12fba31bc5..f1c2d55b4377 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -24,21 +24,43 @@
 #include <asm/cputable.h>
 #include <asm/spu.h>
 
-#define HPAGE_SHIFT_64K 16
-#define HPAGE_SHIFT_16M 24
+#define PAGE_SHIFT_64K  16
+#define PAGE_SHIFT_16M  24
+#define PAGE_SHIFT_16G  34
 
 #define NUM_LOW_AREAS   (0x100000000UL >> SID_SHIFT)
 #define NUM_HIGH_AREAS  (PGTABLE_RANGE >> HTLB_AREA_SHIFT)
+#define MAX_NUMBER_GPAGES       1024
 
-unsigned int hugepte_shift;
-#define PTRS_PER_HUGEPTE        (1 << hugepte_shift)
-#define HUGEPTE_TABLE_SIZE      (sizeof(pte_t) << hugepte_shift)
+/* Tracks the 16G pages after the device tree is scanned and before the
+ * huge_boot_pages list is ready.  */
+static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
+static unsigned nr_gpages;
 
-#define HUGEPD_SHIFT            (HPAGE_SHIFT + hugepte_shift)
-#define HUGEPD_SIZE             (1UL << HUGEPD_SHIFT)
-#define HUGEPD_MASK             (~(HUGEPD_SIZE-1))
+/* Array of valid huge page sizes - non-zero value(hugepte_shift) is
+ * stored for the huge page sizes that are valid.
+ */
+unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
+
+#define hugepte_shift                   mmu_huge_psizes
+#define PTRS_PER_HUGEPTE(psize)         (1 << hugepte_shift[psize])
+#define HUGEPTE_TABLE_SIZE(psize)       (sizeof(pte_t) << hugepte_shift[psize])
+
+#define HUGEPD_SHIFT(psize)             (mmu_psize_to_shift(psize) \
+                                                + hugepte_shift[psize])
+#define HUGEPD_SIZE(psize)              (1UL << HUGEPD_SHIFT(psize))
+#define HUGEPD_MASK(psize)              (~(HUGEPD_SIZE(psize)-1))
+
+/* Subtract one from array size because we don't need a cache for 4K since
+ * is not a huge page size */
+#define huge_pgtable_cache(psize)       (pgtable_cache[HUGEPTE_CACHE_NUM \
+                                                        + psize-1])
+#define HUGEPTE_CACHE_NAME(psize)       (huge_pgtable_cache_name[psize])
 
-#define huge_pgtable_cache      (pgtable_cache[HUGEPTE_CACHE_NUM])
+static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
+        "unused_4K", "hugepte_cache_64K", "unused_64K_AP",
+        "hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G"
+};
 
 /* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
  * will choke on pointers to hugepte tables, which is handy for
@@ -49,24 +71,49 @@ typedef struct { unsigned long pd; } hugepd_t;
 
 #define hugepd_none(hpd)        ((hpd).pd == 0)
 
+static inline int shift_to_mmu_psize(unsigned int shift)
+{
+        switch (shift) {
+#ifndef CONFIG_PPC_64K_PAGES
+        case PAGE_SHIFT_64K:
+            return MMU_PAGE_64K;
+#endif
+        case PAGE_SHIFT_16M:
+            return MMU_PAGE_16M;
+        case PAGE_SHIFT_16G:
+            return MMU_PAGE_16G;
+        }
+        return -1;
+}
+
+static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
+{
+        if (mmu_psize_defs[mmu_psize].shift)
+                return mmu_psize_defs[mmu_psize].shift;
+        BUG();
+}
+
 static inline pte_t *hugepd_page(hugepd_t hpd)
 {
         BUG_ON(!(hpd.pd & HUGEPD_OK));
         return (pte_t *)(hpd.pd & ~HUGEPD_OK);
 }
 
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr)
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
+                                    struct hstate *hstate)
 {
-        unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1));
+        unsigned int shift = huge_page_shift(hstate);
+        int psize = shift_to_mmu_psize(shift);
+        unsigned long idx = ((addr >> shift) & (PTRS_PER_HUGEPTE(psize)-1));
         pte_t *dir = hugepd_page(*hpdp);
 
         return dir + idx;
 }
 
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
-                           unsigned long address)
+                           unsigned long address, unsigned int psize)
 {
-        pte_t *new = kmem_cache_alloc(huge_pgtable_cache,
+        pte_t *new = kmem_cache_zalloc(huge_pgtable_cache(psize),
                                       GFP_KERNEL|__GFP_REPEAT);
 
         if (! new)
@@ -74,7 +121,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 
         spin_lock(&mm->page_table_lock);
         if (!hugepd_none(*hpdp))
-                kmem_cache_free(huge_pgtable_cache, new);
+                kmem_cache_free(huge_pgtable_cache(psize), new);
         else
                 hpdp->pd = (unsigned long)new | HUGEPD_OK;
         spin_unlock(&mm->page_table_lock);
@@ -83,27 +130,60 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 
 /* Base page size affects how we walk hugetlb page tables */
 #ifdef CONFIG_PPC_64K_PAGES
-#define hpmd_offset(pud, addr)          pmd_offset(pud, addr)
-#define hpmd_alloc(mm, pud, addr)       pmd_alloc(mm, pud, addr)
+#define hpmd_offset(pud, addr, h)       pmd_offset(pud, addr)
+#define hpmd_alloc(mm, pud, addr, h)    pmd_alloc(mm, pud, addr)
 #else
 static inline
-pmd_t *hpmd_offset(pud_t *pud, unsigned long addr)
+pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
 {
-        if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+        if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
                 return pmd_offset(pud, addr);
         else
                 return (pmd_t *) pud;
 }
 static inline
-pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr)
+pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
+                  struct hstate *hstate)
 {
-        if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+        if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
                 return pmd_alloc(mm, pud, addr);
         else
                 return (pmd_t *) pud;
 }
 #endif
 
+/* Build list of addresses of gigantic pages.  This function is used in early
+ * boot before the buddy or bootmem allocator is setup.
+ */
+void add_gpage(unsigned long addr, unsigned long page_size,
+        unsigned long number_of_pages)
+{
+        if (!addr)
+                return;
+        while (number_of_pages > 0) {
+                gpage_freearray[nr_gpages] = addr;
+                nr_gpages++;
+                number_of_pages--;
+                addr += page_size;
+        }
+}
+
+/* Moves the gigantic page addresses from the temporary list to the
+ * huge_boot_pages list.
+ */
+int alloc_bootmem_huge_page(struct hstate *hstate)
+{
+        struct huge_bootmem_page *m;
+        if (nr_gpages == 0)
+                return 0;
+        m = phys_to_virt(gpage_freearray[--nr_gpages]);
+        gpage_freearray[nr_gpages] = 0;
+        list_add(&m->list, &huge_boot_pages);
+        m->hstate = hstate;
+        return 1;
+}
+
+
 /* Modelled after find_linux_pte() */
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 {
@@ -111,39 +191,52 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
         pud_t *pu;
         pmd_t *pm;
 
-        BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
+        unsigned int psize;
+        unsigned int shift;
+        unsigned long sz;
+        struct hstate *hstate;
+        psize = get_slice_psize(mm, addr);
+        shift = mmu_psize_to_shift(psize);
+        sz = ((1UL) << shift);
+        hstate = size_to_hstate(sz);
 
-        addr &= HPAGE_MASK;
+        addr &= hstate->mask;
 
         pg = pgd_offset(mm, addr);
         if (!pgd_none(*pg)) {
                 pu = pud_offset(pg, addr);
                 if (!pud_none(*pu)) {
-                        pm = hpmd_offset(pu, addr);
+                        pm = hpmd_offset(pu, addr, hstate);
                         if (!pmd_none(*pm))
-                                return hugepte_offset((hugepd_t *)pm, addr);
+                                return hugepte_offset((hugepd_t *)pm, addr,
+                                                      hstate);
                 }
         }
 
         return NULL;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+                        unsigned long addr, unsigned long sz)
 {
         pgd_t *pg;
         pud_t *pu;
         pmd_t *pm;
         hugepd_t *hpdp = NULL;
+        struct hstate *hstate;
+        unsigned int psize;
+        hstate = size_to_hstate(sz);
 
-        BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
+        psize = get_slice_psize(mm, addr);
+        BUG_ON(!mmu_huge_psizes[psize]);
 
-        addr &= HPAGE_MASK;
+        addr &= hstate->mask;
 
         pg = pgd_offset(mm, addr);
         pu = pud_alloc(mm, pg, addr);
 
         if (pu) {
-                pm = hpmd_alloc(mm, pu, addr);
+                pm = hpmd_alloc(mm, pu, addr, hstate);
                 if (pm)
                         hpdp = (hugepd_t *)pm;
         }
@@ -151,10 +244,10 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
         if (! hpdp)
                 return NULL;
 
-        if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr))
+        if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, psize))
                 return NULL;
 
-        return hugepte_offset(hpdp, addr);
+        return hugepte_offset(hpdp, addr, hstate);
 }
 
 int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
@@ -162,19 +255,22 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
         return 0;
 }
 
-static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
+static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp,
+                               unsigned int psize)
 {
         pte_t *hugepte = hugepd_page(*hpdp);
 
         hpdp->pd = 0;
         tlb->need_flush = 1;
-        pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
+        pgtable_free_tlb(tlb, pgtable_free_cache(hugepte,
+                                                 HUGEPTE_CACHE_NUM+psize-1,
                                                  PGF_CACHENUM_MASK));
 }
 
 static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
                                    unsigned long addr, unsigned long end,
-                                   unsigned long floor, unsigned long ceiling)
+                                   unsigned long floor, unsigned long ceiling,
+                                   unsigned int psize)
 {
         pmd_t *pmd;
         unsigned long next;
@@ -186,7 +282,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
                 next = pmd_addr_end(addr, end);
                 if (pmd_none(*pmd))
                         continue;
-                free_hugepte_range(tlb, (hugepd_t *)pmd);
+                free_hugepte_range(tlb, (hugepd_t *)pmd, psize);
         } while (pmd++, addr = next, addr != end);
 
         start &= PUD_MASK;
@@ -212,6 +308,9 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
         pud_t *pud;
         unsigned long next;
         unsigned long start;
+        unsigned int shift;
+        unsigned int psize = get_slice_psize(tlb->mm, addr);
+        shift = mmu_psize_to_shift(psize);
 
         start = addr;
         pud = pud_offset(pgd, addr);
@@ -220,16 +319,18 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 #ifdef CONFIG_PPC_64K_PAGES
                 if (pud_none_or_clear_bad(pud))
                         continue;
-                hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+                hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling,
+                                       psize);
 #else
-                if (HPAGE_SHIFT == HPAGE_SHIFT_64K) {
+                if (shift == PAGE_SHIFT_64K) {
                         if (pud_none_or_clear_bad(pud))
                                 continue;
-                        hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+                        hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
+                                               ceiling, psize);
                 } else {
                         if (pud_none(*pud))
                                 continue;
-                        free_hugepte_range(tlb, (hugepd_t *)pud);
+                        free_hugepte_range(tlb, (hugepd_t *)pud, psize);
                 }
 #endif
         } while (pud++, addr = next, addr != end);
@@ -255,7 +356,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
  *
  * Must be called with pagetable lock held.
  */
-void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb,
                             unsigned long addr, unsigned long end,
                             unsigned long floor, unsigned long ceiling)
 {
@@ -297,31 +398,33 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb,
          * now has no other vmas using it, so can be freed, we don't
          * bother to round floor or end up - the tests don't need that.
          */
+        unsigned int psize = get_slice_psize(tlb->mm, addr);
 
-        addr &= HUGEPD_MASK;
+        addr &= HUGEPD_MASK(psize);
         if (addr < floor) {
-                addr += HUGEPD_SIZE;
+                addr += HUGEPD_SIZE(psize);
                 if (!addr)
                         return;
         }
         if (ceiling) {
-                ceiling &= HUGEPD_MASK;
+                ceiling &= HUGEPD_MASK(psize);
                 if (!ceiling)
                         return;
         }
         if (end - 1 > ceiling - 1)
-                end -= HUGEPD_SIZE;
+                end -= HUGEPD_SIZE(psize);
         if (addr > end - 1)
                 return;
 
         start = addr;
-        pgd = pgd_offset((*tlb)->mm, addr);
+        pgd = pgd_offset(tlb->mm, addr);
         do {
-                BUG_ON(get_slice_psize((*tlb)->mm, addr) != mmu_huge_psize);
+                psize = get_slice_psize(tlb->mm, addr);
+                BUG_ON(!mmu_huge_psizes[psize]);
                 next = pgd_addr_end(addr, end);
                 if (pgd_none_or_clear_bad(pgd))
                         continue;
-                hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
+                hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
         } while (pgd++, addr = next, addr != end);
 }
 
@@ -334,7 +437,11 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
                  * necessary anymore if we make hpte_need_flush() get the
                  * page size from the slices
                  */
-                pte_update(mm, addr & HPAGE_MASK, ptep, ~0UL, 1);
+                unsigned int psize = get_slice_psize(mm, addr);
+                unsigned int shift = mmu_psize_to_shift(psize);
+                unsigned long sz = ((1UL) << shift);
+                struct hstate *hstate = size_to_hstate(sz);
+                pte_update(mm, addr & hstate->mask, ptep, ~0UL, 1);
         }
         *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 }
@@ -351,14 +458,19 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
 {
         pte_t *ptep;
         struct page *page;
+        unsigned int mmu_psize = get_slice_psize(mm, address);
 
-        if (get_slice_psize(mm, address) != mmu_huge_psize)
+        /* Verify it is a huge page else bail. */
+        if (!mmu_huge_psizes[mmu_psize])
                 return ERR_PTR(-EINVAL);
 
         ptep = huge_pte_offset(mm, address);
         page = pte_page(*ptep);
-        if (page)
-                page += (address % HPAGE_SIZE) / PAGE_SIZE;
+        if (page) {
+                unsigned int shift = mmu_psize_to_shift(mmu_psize);
+                unsigned long sz = ((1UL) << shift);
+                page += (address % sz) / PAGE_SIZE;
+        }
 
         return page;
 }
@@ -368,6 +480,11 @@ int pmd_huge(pmd_t pmd)
         return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+        return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
                 pmd_t *pmd, int write)
@@ -381,15 +498,16 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
                                         unsigned long len, unsigned long pgoff,
                                         unsigned long flags)
 {
-        return slice_get_unmapped_area(addr, len, flags,
-                                       mmu_huge_psize, 1, 0);
+        struct hstate *hstate = hstate_file(file);
+        int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+        return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
 }
 
 /*
  * Called by asm hashtable.S for doing lazy icache flush
  */
 static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
-                                                  pte_t pte, int trap)
+                                        pte_t pte, int trap, unsigned long sz)
 {
         struct page *page;
         int i;
@@ -402,7 +520,7 @@ static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
         /* page is dirty */
         if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
                 if (trap == 0x400) {
-                        for (i = 0; i < (HPAGE_SIZE / PAGE_SIZE); i++)
+                        for (i = 0; i < (sz / PAGE_SIZE); i++)
                                 __flush_dcache_icache(page_address(page+i));
                         set_bit(PG_arch_1, &page->flags);
                 } else {
@@ -418,11 +536,16 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 {
         pte_t *ptep;
         unsigned long old_pte, new_pte;
-        unsigned long va, rflags, pa;
+        unsigned long va, rflags, pa, sz;
         long slot;
         int err = 1;
         int ssize = user_segment_size(ea);
+        unsigned int mmu_psize;
+        int shift;
+        mmu_psize = get_slice_psize(mm, ea);
 
+        if (!mmu_huge_psizes[mmu_psize])
+                goto out;
         ptep = huge_pte_offset(mm, ea);
 
         /* Search the Linux page table for a match with va */
@@ -465,30 +588,32 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
         rflags = 0x2 | (!(new_pte & _PAGE_RW));
         /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
         rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
+        shift = mmu_psize_to_shift(mmu_psize);
+        sz = ((1UL) << shift);
         if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
                 /* No CPU has hugepages but lacks no execute, so we
                  * don't need to worry about that case */
                 rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte),
-                                                       trap);
+                                                       trap, sz);
 
         /* Check if pte already has an hpte (case 2) */
         if (unlikely(old_pte & _PAGE_HASHPTE)) {
                 /* There MIGHT be an HPTE for this pte */
                 unsigned long hash, slot;
 
-                hash = hpt_hash(va, HPAGE_SHIFT, ssize);
+                hash = hpt_hash(va, shift, ssize);
                 if (old_pte & _PAGE_F_SECOND)
                         hash = ~hash;
                 slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
                 slot += (old_pte & _PAGE_F_GIX) >> 12;
 
-                if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_huge_psize,
+                if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
                                          ssize, local) == -1)
                         old_pte &= ~_PAGE_HPTEFLAGS;
         }
 
         if (likely(!(old_pte & _PAGE_HASHPTE))) {
-                unsigned long hash = hpt_hash(va, HPAGE_SHIFT, ssize);
+                unsigned long hash = hpt_hash(va, shift, ssize);
                 unsigned long hpte_group;
 
                 pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
@@ -509,7 +634,7 @@ repeat:
 
                 /* Insert into the hash table, primary slot */
                 slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
-                                          mmu_huge_psize, ssize);
+                                          mmu_psize, ssize);
 
                 /* Primary is full, try the secondary */
                 if (unlikely(slot == -1)) {
@@ -517,7 +642,7 @@ repeat:
                                       HPTES_PER_GROUP) & ~0x7UL; 
                         slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
                                                   HPTE_V_SECONDARY,
-                                                  mmu_huge_psize, ssize);
+                                                  mmu_psize, ssize);
                         if (slot == -1) {
                                 if (mftb() & 0x1)
                                         hpte_group = ((hash & htab_hash_mask) *
@@ -549,45 +674,54 @@ void set_huge_psize(int psize)
 {
         /* Check that it is a page size supported by the hardware and
          * that it fits within pagetable limits. */
-        if (mmu_psize_defs[psize].shift && mmu_psize_defs[psize].shift < SID_SHIFT &&
+        if (mmu_psize_defs[psize].shift &&
+                mmu_psize_defs[psize].shift < SID_SHIFT_1T &&
                 (mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT ||
-                        mmu_psize_defs[psize].shift == HPAGE_SHIFT_64K)) {
-                HPAGE_SHIFT = mmu_psize_defs[psize].shift;
-                mmu_huge_psize = psize;
-#ifdef CONFIG_PPC_64K_PAGES
-                hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
-#else
-                if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
-                        hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
-                else
-                        hugepte_shift = (PUD_SHIFT-HPAGE_SHIFT);
-#endif
-
+                 mmu_psize_defs[psize].shift == PAGE_SHIFT_64K ||
+                 mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) {
+                /* Return if huge page size has already been setup or is the
+                 * same as the base page size. */
+                if (mmu_huge_psizes[psize] ||
+                   mmu_psize_defs[psize].shift == PAGE_SHIFT)
+                        return;
+                hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
+
+                switch (mmu_psize_defs[psize].shift) {
+                case PAGE_SHIFT_64K:
+                    /* We only allow 64k hpages with 4k base page,
+                     * which was checked above, and always put them
+                     * at the PMD */
+                    hugepte_shift[psize] = PMD_SHIFT;
+                    break;
+                case PAGE_SHIFT_16M:
+                    /* 16M pages can be at two different levels
+                     * of pagestables based on base page size */
+                    if (PAGE_SHIFT == PAGE_SHIFT_64K)
+                            hugepte_shift[psize] = PMD_SHIFT;
+                    else /* 4k base page */
+                            hugepte_shift[psize] = PUD_SHIFT;
+                    break;
+                case PAGE_SHIFT_16G:
+                    /* 16G pages are always at PGD level */
+                    hugepte_shift[psize] = PGDIR_SHIFT;
+                    break;
+                }
+                hugepte_shift[psize] -= mmu_psize_defs[psize].shift;
         } else
-                HPAGE_SHIFT = 0;
+                hugepte_shift[psize] = 0;
 }
 
 static int __init hugepage_setup_sz(char *str)
 {
         unsigned long long size;
-        int mmu_psize = -1;
+        int mmu_psize;
         int shift;
 
         size = memparse(str, &str);
 
         shift = __ffs(size);
-        switch (shift) {
-#ifndef CONFIG_PPC_64K_PAGES
-        case HPAGE_SHIFT_64K:
-                mmu_psize = MMU_PAGE_64K;
-                break;
-#endif
-        case HPAGE_SHIFT_16M:
-                mmu_psize = MMU_PAGE_16M;
-                break;
-        }
-
-        if (mmu_psize >=0 && mmu_psize_defs[mmu_psize].shift)
+        mmu_psize = shift_to_mmu_psize(shift);
+        if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift)
                 set_huge_psize(mmu_psize);
         else
                 printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size);
@@ -596,23 +730,40 @@ static int __init hugepage_setup_sz(char *str)
 }
 __setup("hugepagesz=", hugepage_setup_sz);
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
-{
-        memset(addr, 0, kmem_cache_size(cache));
-}
-
 static int __init hugetlbpage_init(void)
 {
+        unsigned int psize;
+
         if (!cpu_has_feature(CPU_FTR_16M_PAGE))
                 return -ENODEV;
 
-        huge_pgtable_cache = kmem_cache_create("hugepte_cache",
-                                               HUGEPTE_TABLE_SIZE,
-                                               HUGEPTE_TABLE_SIZE,
-                                               0,
-                                               zero_ctor);
-        if (! huge_pgtable_cache)
-                panic("hugetlbpage_init(): could not create hugepte cache\n");
+        /* Add supported huge page sizes.  Need to change HUGE_MAX_HSTATE
+         * and adjust PTE_NONCACHE_NUM if the number of supported huge page
+         * sizes changes.
+         */
+        set_huge_psize(MMU_PAGE_16M);
+        set_huge_psize(MMU_PAGE_16G);
+
+        /* Temporarily disable support for 64K huge pages when 64K SPU local
+         * store support is enabled as the current implementation conflicts.
+         */
+#ifndef CONFIG_SPU_FS_64K_LS
+        set_huge_psize(MMU_PAGE_64K);
+#endif
+
+        for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+                if (mmu_huge_psizes[psize]) {
+                        huge_pgtable_cache(psize) = kmem_cache_create(
+                                                HUGEPTE_CACHE_NAME(psize),
+                                                HUGEPTE_TABLE_SIZE(psize),
+                                                HUGEPTE_TABLE_SIZE(psize),
+                                                0,
+                                                NULL);
+                        if (!huge_pgtable_cache(psize))
+                                panic("hugetlbpage_init(): could not create %s"\
+                                      "\n", HUGEPTE_CACHE_NAME(psize));
+                }
+        }
 
         return 0;
 }
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 6ef63caca682..4f7df85129d8 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -136,9 +136,14 @@ static int __init setup_kcore(void)
 module_init(setup_kcore);
 #endif
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
+static void pgd_ctor(void *addr)
 {
-        memset(addr, 0, kmem_cache_size(cache));
+        memset(addr, 0, PGD_TABLE_SIZE);
+}
+
+static void pmd_ctor(void *addr)
+{
+        memset(addr, 0, PMD_TABLE_SIZE);
 }
 
 static const unsigned int pgtable_cache_size[2] = {
@@ -153,29 +158,18 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
 };
 
 #ifdef CONFIG_HUGETLB_PAGE
-/* Hugepages need one extra cache, initialized in hugetlbpage.c.  We
- * can't put into the tables above, because HPAGE_SHIFT is not compile
- * time constant. */
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1];
+/* Hugepages need an extra cache per hugepagesize, initialized in
+ * hugetlbpage.c.  We can't put into the tables above, because HPAGE_SHIFT
+ * is not compile time constant. */
+struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+MMU_PAGE_COUNT];
 #else
 struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
 #endif
 
 void pgtable_cache_init(void)
 {
-        int i;
-
-        for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {
-                int size = pgtable_cache_size[i];
-                const char *name = pgtable_cache_name[i];
-
-                pr_debug("Allocating page table cache %s (#%d) "
-                        "for size: %08x...\n", name, i, size);
-                pgtable_cache[i] = kmem_cache_create(name,
-                                                     size, size,
-                                                     SLAB_PANIC,
-                                                     zero_ctor);
-        }
+        pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
+        pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
 }
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 1ca2235f0965..702691cb9e82 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -186,45 +186,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg,
 }
 EXPORT_SYMBOL_GPL(walk_memory_resource);
 
-void show_mem(void)
-{
-        unsigned long total = 0, reserved = 0;
-        unsigned long shared = 0, cached = 0;
-        unsigned long highmem = 0;
-        struct page *page;
-        pg_data_t *pgdat;
-        unsigned long i;
-
-        printk("Mem-info:\n");
-        show_free_areas();
-        for_each_online_pgdat(pgdat) {
-                unsigned long flags;
-                pgdat_resize_lock(pgdat, &flags);
-                for (i = 0; i < pgdat->node_spanned_pages; i++) {
-                        if (!pfn_valid(pgdat->node_start_pfn + i))
-                                continue;
-                        page = pgdat_page_nr(pgdat, i);
-                        total++;
-                        if (PageHighMem(page))
-                                highmem++;
-                        if (PageReserved(page))
-                                reserved++;
-                        else if (PageSwapCache(page))
-                                cached++;
-                        else if (page_count(page))
-                                shared += page_count(page) - 1;
-                }
-                pgdat_resize_unlock(pgdat, &flags);
-        }
-        printk("%ld pages of RAM\n", total);
-#ifdef CONFIG_HIGHMEM
-        printk("%ld pages of HIGHMEM\n", highmem);
-#endif
-        printk("%ld reserved pages\n", reserved);
-        printk("%ld pages shared\n", shared);
-        printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * Initialize the bootmem system and give it all the memory we
  * have available.  If we are using highmem, we only put the
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index cf4bffba6f7c..d9a181351332 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -39,7 +39,6 @@ EXPORT_SYMBOL(numa_cpu_lookup_table);
 EXPORT_SYMBOL(numa_cpumask_lookup_table);
 EXPORT_SYMBOL(node_data);
 
-static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES];
 static int min_common_depth;
 static int n_mem_addr_cells, n_mem_size_cells;
 
@@ -816,7 +815,7 @@ void __init do_init_bootmem(void)
                 dbg("node %d\n", nid);
                 dbg("NODE_DATA() = %p\n", NODE_DATA(nid));
 
-                NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+                NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
                 NODE_DATA(nid)->node_start_pfn = start_pfn;
                 NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index c7584072dfcc..2001abdb1912 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -145,13 +145,20 @@ void pte_free(struct mm_struct *mm, pgtable_t ptepage)
 void __iomem *
 ioremap(phys_addr_t addr, unsigned long size)
 {
-        return __ioremap(addr, size, _PAGE_NO_CACHE);
+        return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED);
 }
 EXPORT_SYMBOL(ioremap);
 
 void __iomem *
 ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
 {
+        /* writeable implies dirty for kernel addresses */
+        if (flags & _PAGE_RW)
+                flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
+
+        /* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
+        flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);
+
         return __ioremap(addr, size, flags);
 }
 EXPORT_SYMBOL(ioremap_flags);
@@ -163,6 +170,14 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
         phys_addr_t p;
         int err;
 
+        /* Make sure we have the base flags */
+        if ((flags & _PAGE_PRESENT) == 0)
+                flags |= _PAGE_KERNEL;
+
+        /* Non-cacheable page cannot be coherent */
+        if (flags & _PAGE_NO_CACHE)
+                flags &= ~_PAGE_COHERENT;
+
         /*
          * Choose an address to map it to.
          * Once the vmalloc system is running, we use it.
@@ -219,11 +234,6 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
                 v = (ioremap_bot -= size);
         }
 
-        if ((flags & _PAGE_PRESENT) == 0)
-                flags |= _PAGE_KERNEL;
-        if (flags & _PAGE_NO_CACHE)
-                flags |= _PAGE_GUARDED;
-
         /*
          * Should check if it is a candidate for a BAT mapping
          */
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 3ef0ad2f9ca0..365e61ae5dbc 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -107,9 +107,18 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size,
 {
         unsigned long i;
 
+        /* Make sure we have the base flags */
         if ((flags & _PAGE_PRESENT) == 0)
                 flags |= pgprot_val(PAGE_KERNEL);
 
+        /* Non-cacheable page cannot be coherent */
+        if (flags & _PAGE_NO_CACHE)
+                flags &= ~_PAGE_COHERENT;
+
+        /* We don't support the 4K PFN hack with ioremap */
+        if (flags & _PAGE_4K_PFN)
+                return NULL;
+
         WARN_ON(pa & ~PAGE_MASK);
         WARN_ON(((unsigned long)ea) & ~PAGE_MASK);
         WARN_ON(size & ~PAGE_MASK);
@@ -190,6 +199,13 @@ void __iomem * ioremap(phys_addr_t addr, unsigned long size)
 void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size,
                              unsigned long flags)
 {
+        /* writeable implies dirty for kernel addresses */
+        if (flags & _PAGE_RW)
+                flags |= _PAGE_DIRTY;
+
+        /* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
+        flags &= ~(_PAGE_USER | _PAGE_EXEC);
+
         if (ppc_md.ioremap)
                 return ppc_md.ioremap(addr, size, flags);
         return __ioremap(addr, size, flags);
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index a01b5c608ff9..409fcc7b63ce 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -147,7 +147,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
          */
         if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
-                psize = mmu_huge_psize;
+                psize = get_slice_psize(mm, addr);;
 #else
                 BUG();
                 psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index acd2fc8cf492..696a5ee4962d 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -1,8 +1,8 @@
 config PPC_MPC52xx
         bool "52xx-based boards"
         depends on PPC_MULTIPLATFORM && PPC32
-        select FSL_SOC
         select PPC_CLOCK
+        select PPC_PCI_CHOICE
 
 config PPC_MPC5200_SIMPLE
         bool "Generic support for simple MPC5200 based boards"
@@ -47,6 +47,7 @@ config PPC_MPC5200_BUGFIX
 config PPC_MPC5200_GPIO
         bool "MPC5200 GPIO support"
         depends on PPC_MPC52xx
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
+        select GENERIC_GPIO
         help
           Enable gpiolib support for mpc5200 based boards
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 1c8034bfa796..75eb1ede5497 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -30,6 +30,7 @@ config EP8248E
         select 8272
         select 8260
         select FSL_SOC
+        select PHYLIB
         select MDIO_BITBANG
         help
           This enables support for the Embedded Planet EP8248E board.
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index 373e993a5ed5..d5770fdf7f09 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -59,7 +59,6 @@ static void __init ep8248e_pic_init(void)
         of_node_put(np);
 }
 
-#ifdef CONFIG_FS_ENET_MDIO_FCC
 static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level)
 {
         if (level)
@@ -165,7 +164,6 @@ static struct of_platform_driver ep8248e_mdio_driver = {
         .probe = ep8248e_mdio_probe,
         .remove = ep8248e_mdio_remove,
 };
-#endif
 
 struct cpm_pin {
         int port, pin, flags;
@@ -298,9 +296,7 @@ static  __initdata struct of_device_id of_bus_ids[] = {
 static int __init declare_of_platform_devices(void)
 {
         of_platform_bus_probe(NULL, of_bus_ids, NULL);
-#ifdef CONFIG_FS_ENET_MDIO_FCC
         of_register_platform_driver(&ep8248e_mdio_driver);
-#endif
 
         return 0;
 }
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 27d9bf86de01..6159c5d4e5f1 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -2,7 +2,8 @@ menuconfig PPC_83xx
         bool "83xx-based boards"
         depends on 6xx && PPC_MULTIPLATFORM
         select PPC_UDBG_16550
-        select PPC_INDIRECT_PCI
+        select PPC_PCI_CHOICE
+        select FSL_PCI if PCI
         select FSL_SOC
         select IPIC
 
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index f331fd7dd836..ba5028e29890 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the PowerPC 83xx linux kernel.
 #
 obj-y                           := misc.o usb.o
-obj-$(CONFIG_PCI)               += pci.o
+obj-$(CONFIG_SUSPEND)           += suspend.o suspend-asm.o
 obj-$(CONFIG_MPC831x_RDB)       += mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)       += mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)       += mpc834x_mds.o
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index c4db5172b27a..a428f8d1ac80 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -19,6 +19,7 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 6dbc6eabcb02..dd4be4aee314 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -36,6 +36,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index e7f706b624fe..f049d692d4c8 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -27,6 +27,7 @@
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 50e8f632061c..7301d77a08ee 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -35,6 +35,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 2b8a0a3f8557..30d509aa9f08 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -35,6 +35,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index c2e5de60c055..75b80e836576 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -42,6 +42,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index c10dec4bf178..a5273bb28e1b 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -23,6 +23,7 @@
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 64d17b0d6455..be62de23bead 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -19,6 +19,7 @@
 #include <asm/ipic.h>
 #include <asm/udbg.h>
 #include <asm/prom.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index c00356bdb1dd..da030afa2e2c 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -17,6 +17,7 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 88a3b5cabb18..2a7cbabb410a 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -26,6 +26,8 @@
 #define MPC834X_SICRL_USB1         0x20000000
 #define MPC831X_SICRL_USB_MASK     0x00000c00
 #define MPC831X_SICRL_USB_ULPI     0x00000800
+#define MPC8315_SICRL_USB_MASK     0x000000fc
+#define MPC8315_SICRL_USB_ULPI     0x00000054
 #define MPC837X_SICRL_USB_MASK     0xf0000000
 #define MPC837X_SICRL_USB_ULPI     0x50000000
 
@@ -34,6 +36,8 @@
 #define MPC834X_SICRH_USB_UTMI     0x00020000
 #define MPC831X_SICRH_USB_MASK     0x000000e0
 #define MPC831X_SICRH_USB_ULPI     0x000000a0
+#define MPC8315_SICRH_USB_MASK     0x0000ff00
+#define MPC8315_SICRH_USB_ULPI     0x00000000
 
 /* USB Control Register */
 #define FSL_USB2_CONTROL_OFFS      0x500
@@ -55,7 +59,6 @@
  * mpc83xx_* files. Mostly for use by mpc83xx_setup
  */
 
-extern int mpc83xx_add_bridge(struct device_node *dev);
 extern void mpc83xx_restart(char *cmd);
 extern long mpc83xx_time_init(void);
 extern int mpc834x_usb_cfg(void);
diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
deleted file mode 100644
index 14f1080c6c9d..000000000000
--- a/arch/powerpc/platforms/83xx/pci.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * FSL SoC setup code
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-int __init mpc83xx_add_bridge(struct device_node *dev)
-{
-        int len;
-        struct pci_controller *hose;
-        struct resource rsrc;
-        const int *bus_range;
-        int primary = 1, has_address = 0;
-        phys_addr_t immr = get_immrbase();
-
-        DBG("Adding PCI host bridge %s\n", dev->full_name);
-
-        /* Fetch host bridge registers address */
-        has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
-
-        /* Get bus range if any */
-        bus_range = of_get_property(dev, "bus-range", &len);
-        if (bus_range == NULL || len < 2 * sizeof(int)) {
-                printk(KERN_WARNING "Can't get bus-range for %s, assume"
-                       " bus 0\n", dev->full_name);
-        }
-
-        ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
-        hose = pcibios_alloc_controller(dev);
-        if (!hose)
-                return -ENOMEM;
-
-        hose->first_busno = bus_range ? bus_range[0] : 0;
-        hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
-        /* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
-         * the other at 0x8600, we consider the 0x8500 the primary controller
-         */
-        /* PCI 1 */
-        if ((rsrc.start & 0xfffff) == 0x8500) {
-                setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
-        }
-        /* PCI 2 */
-        if ((rsrc.start & 0xfffff) == 0x8600) {
-                setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
-                primary = 0;
-        }
-
-        printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
-               "Firmware bus number: %d->%d\n",
-               (unsigned long long)rsrc.start, hose->first_busno,
-               hose->last_busno);
-
-        DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
-            hose, hose->cfg_addr, hose->cfg_data);
-
-        /* Interpret the "ranges" property */
-        /* This also maps the I/O region and sets isa_io/mem_base */
-        pci_process_bridge_OF_ranges(hose, dev, primary);
-
-        return 0;
-}
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index cf382474a83d..fc21f5c15bab 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -37,6 +37,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S
new file mode 100644
index 000000000000..1930543c98d3
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -0,0 +1,533 @@
+/*
+ * Enter and leave deep sleep state on MPC83xx
+ *
+ * Copyright (c) 2006-2008 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+
+#define SS_MEMSAVE      0x00 /* First 8 bytes of RAM */
+#define SS_HID          0x08 /* 3 HIDs */
+#define SS_IABR         0x14 /* 2 IABRs */
+#define SS_IBCR         0x1c
+#define SS_DABR         0x20 /* 2 DABRs */
+#define SS_DBCR         0x28
+#define SS_SP           0x2c
+#define SS_SR           0x30 /* 16 segment registers */
+#define SS_R2           0x70
+#define SS_MSR          0x74
+#define SS_SDR1         0x78
+#define SS_LR           0x7c
+#define SS_SPRG         0x80 /* 4 SPRGs */
+#define SS_DBAT         0x90 /* 8 DBATs */
+#define SS_IBAT         0xd0 /* 8 IBATs */
+#define SS_TB           0x110
+#define SS_CR           0x118
+#define SS_GPREG        0x11c /* r12-r31 */
+#define STATE_SAVE_SIZE 0x16c
+
+        .section .data
+        .align  5
+
+mpc83xx_sleep_save_area:
+        .space  STATE_SAVE_SIZE
+immrbase:
+        .long   0
+
+        .section .text
+        .align  5
+
+        /* r3 = physical address of IMMR */
+_GLOBAL(mpc83xx_enter_deep_sleep)
+        lis     r4, immrbase@ha
+        stw     r3, immrbase@l(r4)
+
+        /* The first 2 words of memory are used to communicate with the
+         * bootloader, to tell it how to resume.
+         *
+         * The first word is the magic number 0xf5153ae5, and the second
+         * is the pointer to mpc83xx_deep_resume.
+         *
+         * The original content of these two words is saved in SS_MEMSAVE.
+         */
+
+        lis     r3, mpc83xx_sleep_save_area@h
+        ori     r3, r3, mpc83xx_sleep_save_area@l
+
+        lis     r4, KERNELBASE@h
+        lwz     r5, 0(r4)
+        lwz     r6, 4(r4)
+
+        stw     r5, SS_MEMSAVE+0(r3)
+        stw     r6, SS_MEMSAVE+4(r3)
+
+        mfspr   r5, SPRN_HID0
+        mfspr   r6, SPRN_HID1
+        mfspr   r7, SPRN_HID2
+
+        stw     r5, SS_HID+0(r3)
+        stw     r6, SS_HID+4(r3)
+        stw     r7, SS_HID+8(r3)
+
+        mfspr   r4, SPRN_IABR
+        mfspr   r5, SPRN_IABR2
+        mfspr   r6, SPRN_IBCR
+        mfspr   r7, SPRN_DABR
+        mfspr   r8, SPRN_DABR2
+        mfspr   r9, SPRN_DBCR
+
+        stw     r4, SS_IABR+0(r3)
+        stw     r5, SS_IABR+4(r3)
+        stw     r6, SS_IBCR(r3)
+        stw     r7, SS_DABR+0(r3)
+        stw     r8, SS_DABR+4(r3)
+        stw     r9, SS_DBCR(r3)
+
+        mfspr   r4, SPRN_SPRG0
+        mfspr   r5, SPRN_SPRG1
+        mfspr   r6, SPRN_SPRG2
+        mfspr   r7, SPRN_SPRG3
+        mfsdr1  r8
+
+        stw     r4, SS_SPRG+0(r3)
+        stw     r5, SS_SPRG+4(r3)
+        stw     r6, SS_SPRG+8(r3)
+        stw     r7, SS_SPRG+12(r3)
+        stw     r8, SS_SDR1(r3)
+
+        mfspr   r4, SPRN_DBAT0U
+        mfspr   r5, SPRN_DBAT0L
+        mfspr   r6, SPRN_DBAT1U
+        mfspr   r7, SPRN_DBAT1L
+
+        stw     r4, SS_DBAT+0x00(r3)
+        stw     r5, SS_DBAT+0x04(r3)
+        stw     r6, SS_DBAT+0x08(r3)
+        stw     r7, SS_DBAT+0x0c(r3)
+
+        mfspr   r4, SPRN_DBAT2U
+        mfspr   r5, SPRN_DBAT2L
+        mfspr   r6, SPRN_DBAT3U
+        mfspr   r7, SPRN_DBAT3L
+
+        stw     r4, SS_DBAT+0x10(r3)
+        stw     r5, SS_DBAT+0x14(r3)
+        stw     r6, SS_DBAT+0x18(r3)
+        stw     r7, SS_DBAT+0x1c(r3)
+
+        mfspr   r4, SPRN_DBAT4U
+        mfspr   r5, SPRN_DBAT4L
+        mfspr   r6, SPRN_DBAT5U
+        mfspr   r7, SPRN_DBAT5L
+
+        stw     r4, SS_DBAT+0x20(r3)
+        stw     r5, SS_DBAT+0x24(r3)
+        stw     r6, SS_DBAT+0x28(r3)
+        stw     r7, SS_DBAT+0x2c(r3)
+
+        mfspr   r4, SPRN_DBAT6U
+        mfspr   r5, SPRN_DBAT6L
+        mfspr   r6, SPRN_DBAT7U
+        mfspr   r7, SPRN_DBAT7L
+
+        stw     r4, SS_DBAT+0x30(r3)
+        stw     r5, SS_DBAT+0x34(r3)
+        stw     r6, SS_DBAT+0x38(r3)
+        stw     r7, SS_DBAT+0x3c(r3)
+
+        mfspr   r4, SPRN_IBAT0U
+        mfspr   r5, SPRN_IBAT0L
+        mfspr   r6, SPRN_IBAT1U
+        mfspr   r7, SPRN_IBAT1L
+
+        stw     r4, SS_IBAT+0x00(r3)
+        stw     r5, SS_IBAT+0x04(r3)
+        stw     r6, SS_IBAT+0x08(r3)
+        stw     r7, SS_IBAT+0x0c(r3)
+
+        mfspr   r4, SPRN_IBAT2U
+        mfspr   r5, SPRN_IBAT2L
+        mfspr   r6, SPRN_IBAT3U
+        mfspr   r7, SPRN_IBAT3L
+
+        stw     r4, SS_IBAT+0x10(r3)
+        stw     r5, SS_IBAT+0x14(r3)
+        stw     r6, SS_IBAT+0x18(r3)
+        stw     r7, SS_IBAT+0x1c(r3)
+
+        mfspr   r4, SPRN_IBAT4U
+        mfspr   r5, SPRN_IBAT4L
+        mfspr   r6, SPRN_IBAT5U
+        mfspr   r7, SPRN_IBAT5L
+
+        stw     r4, SS_IBAT+0x20(r3)
+        stw     r5, SS_IBAT+0x24(r3)
+        stw     r6, SS_IBAT+0x28(r3)
+        stw     r7, SS_IBAT+0x2c(r3)
+
+        mfspr   r4, SPRN_IBAT6U
+        mfspr   r5, SPRN_IBAT6L
+        mfspr   r6, SPRN_IBAT7U
+        mfspr   r7, SPRN_IBAT7L
+
+        stw     r4, SS_IBAT+0x30(r3)
+        stw     r5, SS_IBAT+0x34(r3)
+        stw     r6, SS_IBAT+0x38(r3)
+        stw     r7, SS_IBAT+0x3c(r3)
+
+        mfmsr   r4
+        mflr    r5
+        mfcr    r6
+
+        stw     r4, SS_MSR(r3)
+        stw     r5, SS_LR(r3)
+        stw     r6, SS_CR(r3)
+        stw     r1, SS_SP(r3)
+        stw     r2, SS_R2(r3)
+
+1:      mftbu   r4
+        mftb    r5
+        mftbu   r6
+        cmpw    r4, r6
+        bne     1b
+
+        stw     r4, SS_TB+0(r3)
+        stw     r5, SS_TB+4(r3)
+
+        stmw    r12, SS_GPREG(r3)
+
+        li      r4, 0
+        addi    r6, r3, SS_SR-4
+1:      mfsrin  r5, r4
+        stwu    r5, 4(r6)
+        addis   r4, r4, 0x1000
+        cmpwi   r4, 0
+        bne     1b
+
+        /* Disable machine checks and critical exceptions */
+        mfmsr   r4
+        rlwinm  r4, r4, 0, ~MSR_CE
+        rlwinm  r4, r4, 0, ~MSR_ME
+        mtmsr   r4
+        isync
+
+#define TMP_VIRT_IMMR           0xf0000000
+#define DEFAULT_IMMR_VALUE      0xff400000
+#define IMMRBAR_BASE            0x0000
+
+        lis     r4, immrbase@ha
+        lwz     r4, immrbase@l(r4)
+
+        /* Use DBAT0 to address the current IMMR space */
+
+        ori     r4, r4, 0x002a
+        mtspr   SPRN_DBAT0L, r4
+        lis     r8, TMP_VIRT_IMMR@h
+        ori     r4, r8, 0x001e  /* 1 MByte accessable from Kernel Space only */
+        mtspr   SPRN_DBAT0U, r4
+        isync
+
+        /* Use DBAT1 to address the original IMMR space */
+
+        lis     r4, DEFAULT_IMMR_VALUE@h
+        ori     r4, r4, 0x002a
+        mtspr   SPRN_DBAT1L, r4
+        lis     r9, (TMP_VIRT_IMMR + 0x01000000)@h
+        ori     r4, r9, 0x001e  /* 1 MByte accessable from Kernel Space only */
+        mtspr   SPRN_DBAT1U, r4
+        isync
+
+        /* Use DBAT2 to address the beginning of RAM.  This isn't done
+         * using the normal virtual mapping, because with page debugging
+         * enabled it will be read-only.
+         */
+
+        li      r4, 0x0002
+        mtspr   SPRN_DBAT2L, r4
+        lis     r4, KERNELBASE@h
+        ori     r4, r4, 0x001e  /* 1 MByte accessable from Kernel Space only */
+        mtspr   SPRN_DBAT2U, r4
+        isync
+
+        /* Flush the cache with our BAT, as there will be TLB misses
+         * otherwise if page debugging is enabled, and these misses
+         * will disturb the PLRU algorithm.
+         */
+
+        bl      __flush_disable_L1
+
+        /* Keep the i-cache enabled, so the hack below for low-boot
+         * flash will work.
+         */
+        mfspr   r3, SPRN_HID0
+        ori     r3, r3, HID0_ICE
+        mtspr   SPRN_HID0, r3
+        isync
+
+        lis     r6, 0xf515
+        ori     r6, r6, 0x3ae5
+
+        lis     r7, mpc83xx_deep_resume@h
+        ori     r7, r7, mpc83xx_deep_resume@l
+        tophys(r7, r7)
+
+        lis     r5, KERNELBASE@h
+        stw     r6, 0(r5)
+        stw     r7, 4(r5)
+
+        /* Reset BARs */
+
+        li      r4, 0
+        stw     r4, 0x0024(r8)
+        stw     r4, 0x002c(r8)
+        stw     r4, 0x0034(r8)
+        stw     r4, 0x003c(r8)
+        stw     r4, 0x0064(r8)
+        stw     r4, 0x006c(r8)
+
+        /* Rev 1 of the 8313 has problems with wakeup events that are
+         * pending during the transition to deep sleep state (such as if
+         * the PCI host sets the state to D3 and then D0 in rapid
+         * succession).  This check shrinks the race window somewhat.
+         *
+         * See erratum PCI23, though the problem is not limited
+         * to PCI.
+         */
+
+        lwz     r3, 0x0b04(r8)
+        andi.   r3, r3, 1
+        bne-    mpc83xx_deep_resume
+
+        /* Move IMMR back to the default location, following the
+         * procedure specified in the MPC8313 manual.
+         */
+        lwz     r4, IMMRBAR_BASE(r8)
+        isync
+        lis     r4, DEFAULT_IMMR_VALUE@h
+        stw     r4, IMMRBAR_BASE(r8)
+        lis     r4, KERNELBASE@h
+        lwz     r4, 0(r4)
+        isync
+        lwz     r4, IMMRBAR_BASE(r9)
+        mr      r8, r9
+        isync
+
+        /* Check the Reset Configuration Word to see whether flash needs
+         * to be mapped at a low address or a high address.
+         */
+
+        lwz     r4, 0x0904(r8)
+        andis.  r4, r4, 0x0400
+        li      r4, 0
+        beq     boot_low
+        lis     r4, 0xff80
+boot_low:
+        stw     r4, 0x0020(r8)
+        lis     r7, 0x8000
+        ori     r7, r7, 0x0016
+
+        mfspr   r5, SPRN_HID0
+        rlwinm  r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+        oris    r5, r5, HID0_SLEEP@h
+        mtspr   SPRN_HID0, r5
+        isync
+
+        mfmsr   r5
+        oris    r5, r5, MSR_POW@h
+
+        /* Enable the flash mapping at the appropriate address.  This
+         * mapping will override the RAM mapping if booting low, so there's
+         * no need to disable the latter.  This must be done inside the same
+         * cache line as setting MSR_POW, so that no instruction fetches
+         * from RAM happen after the flash mapping is turned on.
+         */
+
+        .align  5
+        stw     r7, 0x0024(r8)
+        sync
+        isync
+        mtmsr   r5
+        isync
+1:      b       1b
+
+mpc83xx_deep_resume:
+        lis     r4, 1f@h
+        ori     r4, r4, 1f@l
+        tophys(r4, r4)
+        mtsrr0  r4
+
+        mfmsr   r4
+        rlwinm  r4, r4, 0, ~(MSR_IR | MSR_DR)
+        mtsrr1  r4
+
+        rfi
+
+1:      tlbia
+        bl      __inval_enable_L1
+
+        lis     r3, mpc83xx_sleep_save_area@h
+        ori     r3, r3, mpc83xx_sleep_save_area@l
+        tophys(r3, r3)
+
+        lwz     r5, SS_MEMSAVE+0(r3)
+        lwz     r6, SS_MEMSAVE+4(r3)
+
+        stw     r5, 0(0)
+        stw     r6, 4(0)
+
+        lwz     r5, SS_HID+0(r3)
+        lwz     r6, SS_HID+4(r3)
+        lwz     r7, SS_HID+8(r3)
+
+        mtspr   SPRN_HID0, r5
+        mtspr   SPRN_HID1, r6
+        mtspr   SPRN_HID2, r7
+
+        lwz     r4, SS_IABR+0(r3)
+        lwz     r5, SS_IABR+4(r3)
+        lwz     r6, SS_IBCR(r3)
+        lwz     r7, SS_DABR+0(r3)
+        lwz     r8, SS_DABR+4(r3)
+        lwz     r9, SS_DBCR(r3)
+
+        mtspr   SPRN_IABR, r4
+        mtspr   SPRN_IABR2, r5
+        mtspr   SPRN_IBCR, r6
+        mtspr   SPRN_DABR, r7
+        mtspr   SPRN_DABR2, r8
+        mtspr   SPRN_DBCR, r9
+
+        li      r4, 0
+        addi    r6, r3, SS_SR-4
+1:      lwzu    r5, 4(r6)
+        mtsrin  r5, r4
+        addis   r4, r4, 0x1000
+        cmpwi   r4, 0
+        bne     1b
+
+        lwz     r4, SS_DBAT+0x00(r3)
+        lwz     r5, SS_DBAT+0x04(r3)
+        lwz     r6, SS_DBAT+0x08(r3)
+        lwz     r7, SS_DBAT+0x0c(r3)
+
+        mtspr   SPRN_DBAT0U, r4
+        mtspr   SPRN_DBAT0L, r5
+        mtspr   SPRN_DBAT1U, r6
+        mtspr   SPRN_DBAT1L, r7
+
+        lwz     r4, SS_DBAT+0x10(r3)
+        lwz     r5, SS_DBAT+0x14(r3)
+        lwz     r6, SS_DBAT+0x18(r3)
+        lwz     r7, SS_DBAT+0x1c(r3)
+
+        mtspr   SPRN_DBAT2U, r4
+        mtspr   SPRN_DBAT2L, r5
+        mtspr   SPRN_DBAT3U, r6
+        mtspr   SPRN_DBAT3L, r7
+
+        lwz     r4, SS_DBAT+0x20(r3)
+        lwz     r5, SS_DBAT+0x24(r3)
+        lwz     r6, SS_DBAT+0x28(r3)
+        lwz     r7, SS_DBAT+0x2c(r3)
+
+        mtspr   SPRN_DBAT4U, r4
+        mtspr   SPRN_DBAT4L, r5
+        mtspr   SPRN_DBAT5U, r6
+        mtspr   SPRN_DBAT5L, r7
+
+        lwz     r4, SS_DBAT+0x30(r3)
+        lwz     r5, SS_DBAT+0x34(r3)
+        lwz     r6, SS_DBAT+0x38(r3)
+        lwz     r7, SS_DBAT+0x3c(r3)
+
+        mtspr   SPRN_DBAT6U, r4
+        mtspr   SPRN_DBAT6L, r5
+        mtspr   SPRN_DBAT7U, r6
+        mtspr   SPRN_DBAT7L, r7
+
+        lwz     r4, SS_IBAT+0x00(r3)
+        lwz     r5, SS_IBAT+0x04(r3)
+        lwz     r6, SS_IBAT+0x08(r3)
+        lwz     r7, SS_IBAT+0x0c(r3)
+
+        mtspr   SPRN_IBAT0U, r4
+        mtspr   SPRN_IBAT0L, r5
+        mtspr   SPRN_IBAT1U, r6
+        mtspr   SPRN_IBAT1L, r7
+
+        lwz     r4, SS_IBAT+0x10(r3)
+        lwz     r5, SS_IBAT+0x14(r3)
+        lwz     r6, SS_IBAT+0x18(r3)
+        lwz     r7, SS_IBAT+0x1c(r3)
+
+        mtspr   SPRN_IBAT2U, r4
+        mtspr   SPRN_IBAT2L, r5
+        mtspr   SPRN_IBAT3U, r6
+        mtspr   SPRN_IBAT3L, r7
+
+        lwz     r4, SS_IBAT+0x20(r3)
+        lwz     r5, SS_IBAT+0x24(r3)
+        lwz     r6, SS_IBAT+0x28(r3)
+        lwz     r7, SS_IBAT+0x2c(r3)
+
+        mtspr   SPRN_IBAT4U, r4
+        mtspr   SPRN_IBAT4L, r5
+        mtspr   SPRN_IBAT5U, r6
+        mtspr   SPRN_IBAT5L, r7
+
+        lwz     r4, SS_IBAT+0x30(r3)
+        lwz     r5, SS_IBAT+0x34(r3)
+        lwz     r6, SS_IBAT+0x38(r3)
+        lwz     r7, SS_IBAT+0x3c(r3)
+
+        mtspr   SPRN_IBAT6U, r4
+        mtspr   SPRN_IBAT6L, r5
+        mtspr   SPRN_IBAT7U, r6
+        mtspr   SPRN_IBAT7L, r7
+
+        lwz     r4, SS_SPRG+0(r3)
+        lwz     r5, SS_SPRG+4(r3)
+        lwz     r6, SS_SPRG+8(r3)
+        lwz     r7, SS_SPRG+12(r3)
+        lwz     r8, SS_SDR1(r3)
+
+        mtspr   SPRN_SPRG0, r4
+        mtspr   SPRN_SPRG1, r5
+        mtspr   SPRN_SPRG2, r6
+        mtspr   SPRN_SPRG3, r7
+        mtsdr1  r8
+
+        lwz     r4, SS_MSR(r3)
+        lwz     r5, SS_LR(r3)
+        lwz     r6, SS_CR(r3)
+        lwz     r1, SS_SP(r3)
+        lwz     r2, SS_R2(r3)
+
+        mtsrr1  r4
+        mtsrr0  r5
+        mtcr    r6
+
+        li      r4, 0
+        mtspr   SPRN_TBWL, r4
+
+        lwz     r4, SS_TB+0(r3)
+        lwz     r5, SS_TB+4(r3)
+
+        mtspr   SPRN_TBWU, r4
+        mtspr   SPRN_TBWL, r5
+
+        lmw     r12, SS_GPREG(r3)
+
+        /* Kick decrementer */
+        li      r0, 1
+        mtdec   r0
+
+        rfi
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
new file mode 100644
index 000000000000..08e65fc8b98c
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -0,0 +1,388 @@
+/*
+ * MPC83xx suspend support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/suspend.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mpc6xx.h>
+
+#include <sysdev/fsl_soc.h>
+
+#define PMCCR1_NEXT_STATE       0x0C /* Next state for power management */
+#define PMCCR1_NEXT_STATE_SHIFT 2
+#define PMCCR1_CURR_STATE       0x03 /* Current state for power management*/
+#define IMMR_RCW_OFFSET         0x900
+#define RCW_PCI_HOST            0x80000000
+
+void mpc83xx_enter_deep_sleep(phys_addr_t immrbase);
+
+struct mpc83xx_pmc {
+        u32 config;
+#define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */
+#define PMCCR_SLPEN 1 /* System low power enable */
+
+        u32 event;
+        u32 mask;
+/* All but PMCI are deep-sleep only */
+#define PMCER_GPIO   0x100
+#define PMCER_PCI    0x080
+#define PMCER_USB    0x040
+#define PMCER_ETSEC1 0x020
+#define PMCER_ETSEC2 0x010
+#define PMCER_TIMER  0x008
+#define PMCER_INT1   0x004
+#define PMCER_INT2   0x002
+#define PMCER_PMCI   0x001
+#define PMCER_ALL    0x1FF
+
+        /* deep-sleep only */
+        u32 config1;
+#define PMCCR1_USE_STATE  0x80000000
+#define PMCCR1_PME_EN     0x00000080
+#define PMCCR1_ASSERT_PME 0x00000040
+#define PMCCR1_POWER_OFF  0x00000020
+
+        /* deep-sleep only */
+        u32 config2;
+};
+
+struct mpc83xx_rcw {
+        u32 rcwlr;
+        u32 rcwhr;
+};
+
+struct mpc83xx_clock {
+        u32 spmr;
+        u32 occr;
+        u32 sccr;
+};
+
+struct pmc_type {
+        int has_deep_sleep;
+};
+
+static struct of_device *pmc_dev;
+static int has_deep_sleep, deep_sleeping;
+static int pmc_irq;
+static struct mpc83xx_pmc __iomem *pmc_regs;
+static struct mpc83xx_clock __iomem *clock_regs;
+static int is_pci_agent, wake_from_pci;
+static phys_addr_t immrbase;
+static int pci_pm_state;
+static DECLARE_WAIT_QUEUE_HEAD(agent_wq);
+
+int fsl_deep_sleep(void)
+{
+        return deep_sleeping;
+}
+
+static int mpc83xx_change_state(void)
+{
+        u32 curr_state;
+        u32 reg_cfg1 = in_be32(&pmc_regs->config1);
+
+        if (is_pci_agent) {
+                pci_pm_state = (reg_cfg1 & PMCCR1_NEXT_STATE) >>
+                               PMCCR1_NEXT_STATE_SHIFT;
+                curr_state = reg_cfg1 & PMCCR1_CURR_STATE;
+
+                if (curr_state != pci_pm_state) {
+                        reg_cfg1 &= ~PMCCR1_CURR_STATE;
+                        reg_cfg1 |= pci_pm_state;
+                        out_be32(&pmc_regs->config1, reg_cfg1);
+
+                        wake_up(&agent_wq);
+                        return 1;
+                }
+        }
+
+        return 0;
+}
+
+static irqreturn_t pmc_irq_handler(int irq, void *dev_id)
+{
+        u32 event = in_be32(&pmc_regs->event);
+        int ret = IRQ_NONE;
+
+        if (mpc83xx_change_state())
+                ret = IRQ_HANDLED;
+
+        if (event) {
+                out_be32(&pmc_regs->event, event);
+                ret = IRQ_HANDLED;
+        }
+
+        return ret;
+}
+
+static int mpc83xx_suspend_enter(suspend_state_t state)
+{
+        int ret = -EAGAIN;
+
+        /* Don't go to sleep if there's a race where pci_pm_state changes
+         * between the agent thread checking it and the PM code disabling
+         * interrupts.
+         */
+        if (wake_from_pci) {
+                if (pci_pm_state != (deep_sleeping ? 3 : 2))
+                        goto out;
+
+                out_be32(&pmc_regs->config1,
+                         in_be32(&pmc_regs->config1) | PMCCR1_PME_EN);
+        }
+
+        /* Put the system into low-power mode and the RAM
+         * into self-refresh mode once the core goes to
+         * sleep.
+         */
+
+        out_be32(&pmc_regs->config, PMCCR_SLPEN | PMCCR_DLPEN);
+
+        /* If it has deep sleep (i.e. it's an 831x or compatible),
+         * disable power to the core upon entering sleep mode.  This will
+         * require going through the boot firmware upon a wakeup event.
+         */
+
+        if (deep_sleeping) {
+                out_be32(&pmc_regs->mask, PMCER_ALL);
+
+                out_be32(&pmc_regs->config1,
+                         in_be32(&pmc_regs->config1) | PMCCR1_POWER_OFF);
+
+                enable_kernel_fp();
+
+                mpc83xx_enter_deep_sleep(immrbase);
+
+                out_be32(&pmc_regs->config1,
+                         in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF);
+
+                out_be32(&pmc_regs->mask, PMCER_PMCI);
+        } else {
+                out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+                mpc6xx_enter_standby();
+        }
+
+        ret = 0;
+
+out:
+        out_be32(&pmc_regs->config1,
+                 in_be32(&pmc_regs->config1) & ~PMCCR1_PME_EN);
+
+        return ret;
+}
+
+static void mpc83xx_suspend_finish(void)
+{
+        deep_sleeping = 0;
+}
+
+static int mpc83xx_suspend_valid(suspend_state_t state)
+{
+        return state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM;
+}
+
+static int mpc83xx_suspend_begin(suspend_state_t state)
+{
+        switch (state) {
+                case PM_SUSPEND_STANDBY:
+                        deep_sleeping = 0;
+                        return 0;
+
+                case PM_SUSPEND_MEM:
+                        if (has_deep_sleep)
+                                deep_sleeping = 1;
+
+                        return 0;
+
+                default:
+                        return -EINVAL;
+        }
+}
+
+static int agent_thread_fn(void *data)
+{
+        while (1) {
+                wait_event_interruptible(agent_wq, pci_pm_state >= 2);
+                try_to_freeze();
+
+                if (signal_pending(current) || pci_pm_state < 2)
+                        continue;
+
+                /* With a preemptible kernel (or SMP), this could race with
+                 * a userspace-driven suspend request.  It's probably best
+                 * to avoid mixing the two with such a configuration (or
+                 * else fix it by adding a mutex to state_store that we can
+                 * synchronize with).
+                 */
+
+                wake_from_pci = 1;
+
+                pm_suspend(pci_pm_state == 3 ? PM_SUSPEND_MEM :
+                                               PM_SUSPEND_STANDBY);
+
+                wake_from_pci = 0;
+        }
+
+        return 0;
+}
+
+static void mpc83xx_set_agent(void)
+{
+        out_be32(&pmc_regs->config1, PMCCR1_USE_STATE);
+        out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+        kthread_run(agent_thread_fn, NULL, "PCI power mgt");
+}
+
+static int mpc83xx_is_pci_agent(void)
+{
+        struct mpc83xx_rcw __iomem *rcw_regs;
+        int ret;
+
+        rcw_regs = ioremap(get_immrbase() + IMMR_RCW_OFFSET,
+                           sizeof(struct mpc83xx_rcw));
+
+        if (!rcw_regs)
+                return -ENOMEM;
+
+        ret = !(in_be32(&rcw_regs->rcwhr) & RCW_PCI_HOST);
+
+        iounmap(rcw_regs);
+        return ret;
+}
+
+static struct platform_suspend_ops mpc83xx_suspend_ops = {
+        .valid = mpc83xx_suspend_valid,
+        .begin = mpc83xx_suspend_begin,
+        .enter = mpc83xx_suspend_enter,
+        .finish = mpc83xx_suspend_finish,
+};
+
+static int pmc_probe(struct of_device *ofdev,
+                     const struct of_device_id *match)
+{
+        struct device_node *np = ofdev->node;
+        struct resource res;
+        struct pmc_type *type = match->data;
+        int ret = 0;
+
+        if (!of_device_is_available(np))
+                return -ENODEV;
+
+        has_deep_sleep = type->has_deep_sleep;
+        immrbase = get_immrbase();
+        pmc_dev = ofdev;
+
+        is_pci_agent = mpc83xx_is_pci_agent();
+        if (is_pci_agent < 0)
+                return is_pci_agent;
+
+        ret = of_address_to_resource(np, 0, &res);
+        if (ret)
+                return -ENODEV;
+
+        pmc_irq = irq_of_parse_and_map(np, 0);
+        if (pmc_irq != NO_IRQ) {
+                ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED,
+                                  "pmc", ofdev);
+
+                if (ret)
+                        return -EBUSY;
+        }
+
+        pmc_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+        if (!pmc_regs) {
+                ret = -ENOMEM;
+                goto out;
+        }
+
+        ret = of_address_to_resource(np, 1, &res);
+        if (ret) {
+                ret = -ENODEV;
+                goto out_pmc;
+        }
+
+        clock_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+        if (!clock_regs) {
+                ret = -ENOMEM;
+                goto out_pmc;
+        }
+
+        if (is_pci_agent)
+                mpc83xx_set_agent();
+
+        suspend_set_ops(&mpc83xx_suspend_ops);
+        return 0;
+
+out_pmc:
+        iounmap(pmc_regs);
+out:
+        if (pmc_irq != NO_IRQ)
+                free_irq(pmc_irq, ofdev);
+
+        return ret;
+}
+
+static int pmc_remove(struct of_device *ofdev)
+{
+        return -EPERM;
+};
+
+static struct pmc_type pmc_types[] = {
+        {
+                .has_deep_sleep = 1,
+        },
+        {
+                .has_deep_sleep = 0,
+        }
+};
+
+static struct of_device_id pmc_match[] = {
+        {
+                .compatible = "fsl,mpc8313-pmc",
+                .data = &pmc_types[0],
+        },
+        {
+                .compatible = "fsl,mpc8349-pmc",
+                .data = &pmc_types[1],
+        },
+        {}
+};
+
+static struct of_platform_driver pmc_driver = {
+        .name = "mpc83xx-pmc",
+        .match_table = pmc_match,
+        .probe = pmc_probe,
+        .remove = pmc_remove
+};
+
+static int pmc_init(void)
+{
+        return of_register_platform_driver(&pmc_driver);
+}
+
+module_init(pmc_init);
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 64bcf0a33c71..cc99c280aad9 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -137,15 +137,21 @@ int mpc831x_usb_cfg(void)
 
         /* Configure pin mux for ULPI.  There is no pin mux for UTMI */
         if (prop && !strcmp(prop, "ulpi")) {
-                temp = in_be32(immap + MPC83XX_SICRL_OFFS);
-                temp &= ~MPC831X_SICRL_USB_MASK;
-                temp |= MPC831X_SICRL_USB_ULPI;
-                out_be32(immap + MPC83XX_SICRL_OFFS, temp);
-
-                temp = in_be32(immap + MPC83XX_SICRH_OFFS);
-                temp &= ~MPC831X_SICRH_USB_MASK;
-                temp |= MPC831X_SICRH_USB_ULPI;
-                out_be32(immap + MPC83XX_SICRH_OFFS, temp);
+                if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
+                        clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+                                        MPC8315_SICRL_USB_MASK,
+                                        MPC8315_SICRL_USB_ULPI);
+                        clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+                                        MPC8315_SICRH_USB_MASK,
+                                        MPC8315_SICRH_USB_ULPI);
+                } else {
+                        clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+                                        MPC831X_SICRL_USB_MASK,
+                                        MPC831X_SICRL_USB_ULPI);
+                        clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+                                        MPC831X_SICRH_USB_MASK,
+                                        MPC831X_SICRH_USB_ULPI);
+                }
         }
 
         iounmap(immap);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index cebea5cadbc1..291675b0097a 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -2,8 +2,8 @@ menuconfig MPC85xx
         bool "Machine Type"
         depends on PPC_85xx
         select PPC_UDBG_16550
-        select PPC_INDIRECT_PCI if PCI
         select MPIC
+        select PPC_PCI_CHOICE
         select FSL_PCI if PCI
         select SERIAL_8250_SHARE_IRQ if SERIAL_8250
         default y
@@ -86,7 +86,6 @@ config TQM8548
         help
           This option enables support for the TQ Components TQM8548 board.
         select DEFAULT_UIMAGE
-        select PPC_CPM_NEW_BINDING
         select TQM85xx
 
 config TQM8555
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 25f41cd2d33a..00c535806647 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -115,7 +115,6 @@ void __init mpc85xx_ds_pic_init(void)
 
 #ifdef CONFIG_PCI
 static int primary_phb_addr;
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
                                 u_char bus, u_char devfn);
 
@@ -161,7 +160,6 @@ static void __init mpc85xx_ds_setup_arch(void)
                 }
         }
 
-        uses_fsl_uli_m1575 = 1;
         ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 80a81e02bb55..9355a5269431 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -27,6 +27,7 @@ config SBC8641D
 config MPC8610_HPCD
         bool "Freescale MPC8610 HPCD"
         select DEFAULT_UIMAGE
+        select FSL_ULI1575
         help
           This option enables support for the MPC8610 HPCD board.
 
@@ -34,6 +35,7 @@ endif
 
 config MPC8641
         bool
+        select PPC_PCI_CHOICE
         select FSL_PCI if PCI
         select PPC_UDBG_16550
         select MPIC
@@ -41,6 +43,7 @@ config MPC8641
 
 config MPC8610
         bool
+        select PPC_PCI_CHOICE
         select FSL_PCI if PCI
         select PPC_UDBG_16550
         select MPIC
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 30725302884a..5eedb710896e 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -58,93 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
-#ifdef CONFIG_PCI
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-        u32 temp32;
-
-        /* Disable INTx */
-        pci_read_config_dword(dev, 0x48, &temp32);
-        pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
-
-        /* Enable sideband interrupt */
-        pci_read_config_dword(dev, 0x90, &temp32);
-        pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
-{
-        unsigned char c;
-        unsigned short temp;
-
-        /* Interrupt Disable, Needed when SATA disabled */
-        pci_read_config_word(dev, PCI_COMMAND, &temp);
-        temp |= 1<<10;
-        pci_write_config_word(dev, PCI_COMMAND, temp);
-
-        pci_read_config_byte(dev, 0x83, &c);
-        c |= 0x80;
-        pci_write_config_byte(dev, 0x83, c);
-
-        pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
-        pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
-
-        pci_read_config_byte(dev, 0x83, &c);
-        c &= 0x7f;
-        pci_write_config_byte(dev, 0x83, c);
-}
-
-/*
- * Since 8259PIC was disabled on the board, the IDE device can not
- * use the legacy IRQ, we need to let the IDE device work under
- * native mode and use the interrupt line like other PCI devices.
- * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
- * as the interrupt for IDE device.
- */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-        unsigned char c;
-
-        pci_read_config_byte(dev, 0x4b, &c);
-        c |= 0x10;
-        pci_write_config_byte(dev, 0x4b, c);
-}
-
-/*
- * SATA interrupt pin bug fix
- * There's a chip bug for 5288, The interrupt pin should be 2,
- * not the read only value 1, So it use INTB#, not INTA# which
- * actually used by the IDE device 5229.
- * As of this bug, during the PCI initialization, 5288 read the
- * irq of IDE device from the device tree, this function fix this
- * bug by re-assigning a correct irq to 5288.
- *
- */
-static void __devinit final_uli5288(struct pci_dev *dev)
-{
-        struct pci_controller *hose = pci_bus_to_host(dev->bus);
-        struct device_node *hosenode = hose ? hose->dn : NULL;
-        struct of_irq oirq;
-        int virq, pin = 2;
-        u32 laddr[3];
-
-        if (!hosenode)
-                return;
-
-        laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
-        laddr[1] = laddr[2] = 0;
-        of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-        virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-                                     oirq.size);
-        dev->irq = virq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
-#endif /* CONFIG_PCI */
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
 static u32 get_busfreq(void)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 7916599c9126..f712d9c0991b 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -45,7 +45,6 @@
 #endif
 
 #ifdef CONFIG_PCI
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
                                 u_char bus, u_char devfn);
 
@@ -87,7 +86,6 @@ mpc86xx_hpcn_setup_arch(void)
                         fsl_add_bridge(np, 0);
         }
 
-        uses_fsl_uli_m1575 = 1;
         ppc_md.pci_exclude_device = mpc86xx_exclude_device;
 
 #endif
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 690c1f46e698..1d0968775c0a 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -253,17 +253,13 @@ config CPM2
         depends on MPC85xx || 8260
         select CPM
         select PPC_LIB_RHEAP
+        select PPC_PCI_CHOICE
         help
           The CPM2 (Communications Processor Module) is a coprocessor on
           embedded CPUs made by Freescale.  Selecting this option means that
           you wish to build a kernel for a machine with a CPM2 coprocessor
           on it (826x, 827x, 8560).
 
-config PPC_CPM_NEW_BINDING
-        bool
-        depends on CPM1 || CPM2
-        default y
-
 config AXON_RAM
         tristate "Axon DDR2 memory device driver"
         depends on PPC_IBM_CELL_BLADE
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 5bc4b611ff88..7f6512733862 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -42,12 +42,14 @@ config 40x
         select PPC_DCR_NATIVE
         select PPC_UDBG_16550
         select 4xx_SOC
+        select PPC_PCI_CHOICE
 
 config 44x
         bool "AMCC 44x"
         select PPC_DCR_NATIVE
         select PPC_UDBG_16550
         select 4xx_SOC
+        select PPC_PCI_CHOICE
 
 config E200
         bool "Freescale e200"
@@ -84,9 +86,6 @@ config TUNE_CELL
           machines. When building a kernel that is supposed to run only
           on Cell, you should also select the POWER4_ONLY option.
 
-config 6xx
-        bool
-
 # this is temp to handle compat with arch=ppc
 config 8xx
         bool
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 3959fcfe731c..c14d7d8d96c8 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -83,6 +83,22 @@ config CBE_RAS
         depends on PPC_CELL_NATIVE
         default y
 
+config PPC_IBM_CELL_RESETBUTTON
+        bool "IBM Cell Blade Pinhole reset button"
+        depends on CBE_RAS && PPC_IBM_CELL_BLADE
+        default y
+        help
+          Support Pinhole Resetbutton on IBM Cell blades.
+          This adds a method to trigger system reset via front panel pinhole button.
+
+config PPC_IBM_CELL_POWERBUTTON
+        tristate "IBM Cell Blade power button"
+        depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV
+        default y
+        help
+          Support Powerbutton on IBM Cell blades.
+          This will enable the powerbutton as an input device.
+
 config CBE_THERM
         tristate "CBE thermal support"
         default m
@@ -107,6 +123,15 @@ config CBE_CPUFREQ_PMI
           processor will not only be able to run at lower speed,
           but also at lower core voltage.
 
+config CBE_CPUFREQ_SPU_GOVERNOR
+        tristate "CBE frequency scaling based on SPU usage"
+        depends on SPU_FS && CPU_FREQ
+        default m
+        help
+          This governor checks for spu usage to adjust the cpu frequency.
+          If no spu is running on a given cpu, that cpu will be throttled to
+          the minimal possible frequency.
+
 endmenu
 
 config OPROFILE_CELL
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index c2a7e4e5ddf9..7fd830872c43 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -8,6 +8,9 @@ obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
 obj-$(CONFIG_CBE_CPUFREQ_PMI)           += cbe_cpufreq_pmi.o
 obj-$(CONFIG_CBE_CPUFREQ)               += cbe-cpufreq.o
 cbe-cpufreq-y                           += cbe_cpufreq_pervasive.o cbe_cpufreq.o
+obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)  += cpufreq_spudemand.o
+
+obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)  += cbe_powerbutton.o
 
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_PPC_CELL_NATIVE)           += smp.o
diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c
new file mode 100644
index 000000000000..dcddaa5fcb66
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -0,0 +1,117 @@
+/*
+ * driver for powerbutton on IBM cell blades
+ *
+ * (C) Copyright IBM Corp. 2005-2008
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <asm/pmi.h>
+#include <asm/prom.h>
+
+static struct input_dev *button_dev;
+static struct platform_device *button_pdev;
+
+static void cbe_powerbutton_handle_pmi(pmi_message_t pmi_msg)
+{
+        BUG_ON(pmi_msg.type != PMI_TYPE_POWER_BUTTON);
+
+        input_report_key(button_dev, KEY_POWER, 1);
+        input_sync(button_dev);
+        input_report_key(button_dev, KEY_POWER, 0);
+        input_sync(button_dev);
+}
+
+static struct pmi_handler cbe_pmi_handler = {
+        .type                   = PMI_TYPE_POWER_BUTTON,
+        .handle_pmi_message     = cbe_powerbutton_handle_pmi,
+};
+
+static int __init cbe_powerbutton_init(void)
+{
+        int ret = 0;
+        struct input_dev *dev;
+
+        if (!machine_is_compatible("IBM,CBPLUS-1.0")) {
+                printk(KERN_ERR "%s: Not a cell blade.\n", __func__);
+                ret = -ENODEV;
+                goto out;
+        }
+
+        dev = input_allocate_device();
+        if (!dev) {
+                ret = -ENOMEM;
+                printk(KERN_ERR "%s: Not enough memory.\n", __func__);
+                goto out;
+        }
+
+        set_bit(EV_KEY, dev->evbit);
+        set_bit(KEY_POWER, dev->keybit);
+
+        dev->name = "Power Button";
+        dev->id.bustype = BUS_HOST;
+
+        /* this makes the button look like an acpi power button
+         * no clue whether anyone relies on that though */
+        dev->id.product = 0x02;
+        dev->phys = "LNXPWRBN/button/input0";
+
+        button_pdev = platform_device_register_simple("power_button", 0, NULL, 0);
+        if (IS_ERR(button_pdev)) {
+                ret = PTR_ERR(button_pdev);
+                goto out_free_input;
+        }
+
+        dev->dev.parent = &button_pdev->dev;
+        ret = input_register_device(dev);
+        if (ret) {
+                printk(KERN_ERR "%s: Failed to register device\n", __func__);
+                goto out_free_pdev;
+        }
+
+        button_dev = dev;
+
+        ret = pmi_register_handler(&cbe_pmi_handler);
+        if (ret) {
+                printk(KERN_ERR "%s: Failed to register with pmi.\n", __func__);
+                goto out_free_pdev;
+        }
+
+        goto out;
+
+out_free_pdev:
+        platform_device_unregister(button_pdev);
+out_free_input:
+        input_free_device(dev);
+out:
+        return ret;
+}
+
+static void __exit cbe_powerbutton_exit(void)
+{
+        pmi_unregister_handler(&cbe_pmi_handler);
+        platform_device_unregister(button_pdev);
+        input_free_device(button_dev);
+}
+
+module_init(cbe_powerbutton_init);
+module_exit(cbe_powerbutton_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 4852bf312d83..4d4c8c169124 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -97,7 +97,8 @@ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iom
         return value.spe[spu->spe_id];
 }
 
-static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_temp(struct sys_device *sysdev, struct sysdev_attribute *attr,
+                        char *buf)
 {
         u8 value;
         struct cbe_pmd_regs __iomem *pmd_regs;
@@ -146,32 +147,38 @@ static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char
         return size;
 }
 
-static ssize_t spu_show_throttle_end(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_end(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         return show_throttle(get_pmd_regs(sysdev), buf, 0);
 }
 
-static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_begin(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         return show_throttle(get_pmd_regs(sysdev), buf, 8);
 }
 
-static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         return show_throttle(get_pmd_regs(sysdev), buf, 16);
 }
 
-static ssize_t spu_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_end(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, const char *buf, size_t size)
 {
         return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
 }
 
-static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_begin(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, const char *buf, size_t size)
 {
         return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
 }
 
-static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, const char *buf, size_t size)
 {
         return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
 }
@@ -192,43 +199,51 @@ static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
 
 /* shows the temperature of the DTS on the PPE,
  * located near the linear thermal sensor */
-static ssize_t ppe_show_temp0(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_temp0(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         return ppe_show_temp(sysdev, buf, 32);
 }
 
 /* shows the temperature of the second DTS on the PPE */
-static ssize_t ppe_show_temp1(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_temp1(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         return ppe_show_temp(sysdev, buf, 0);
 }
 
-static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_end(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
 }
 
-static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
 }
 
-static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
 }
 
-static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_end(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, const char *buf, size_t size)
 {
         return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
 }
 
-static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, const char *buf, size_t size)
 {
         return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
 }
 
-static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev,
+                        struct sysdev_attribute *attr, const char *buf, size_t size)
 {
         return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
 }
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 0e04f8fb152a..3e7e0f1568ef 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -281,7 +281,7 @@ static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data)
 
         dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va,
                                        PAGE_SIZE, DMA_FROM_DEVICE);
-        if (dma_mapping_error(dummy_page_da)) {
+        if (dma_mapping_error(bus->phb->parent, dummy_page_da)) {
                 pr_err("PCIEX:Map dummy page failed.\n");
                 kfree(dummy_page_va);
                 return -1;
diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
new file mode 100644
index 000000000000..a3c6c01bd6db
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
@@ -0,0 +1,184 @@
+/*
+ * spu aware cpufreq governor for the cell processor
+ *
+ * © Copyright IBM Corporation 2006-2008
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <asm/atomic.h>
+#include <asm/machdep.h>
+#include <asm/spu.h>
+
+#define POLL_TIME       100000          /* in µs */
+#define EXP             753             /* exp(-1) in fixed-point */
+
+struct spu_gov_info_struct {
+        unsigned long busy_spus;        /* fixed-point */
+        struct cpufreq_policy *policy;
+        struct delayed_work work;
+        unsigned int poll_int;          /* µs */
+};
+static DEFINE_PER_CPU(struct spu_gov_info_struct, spu_gov_info);
+
+static struct workqueue_struct *kspugov_wq;
+
+static int calc_freq(struct spu_gov_info_struct *info)
+{
+        int cpu;
+        int busy_spus;
+
+        cpu = info->policy->cpu;
+        busy_spus = atomic_read(&cbe_spu_info[cpu_to_node(cpu)].busy_spus);
+
+        CALC_LOAD(info->busy_spus, EXP, busy_spus * FIXED_1);
+        pr_debug("cpu %d: busy_spus=%d, info->busy_spus=%ld\n",
+                        cpu, busy_spus, info->busy_spus);
+
+        return info->policy->max * info->busy_spus / FIXED_1;
+}
+
+static void spu_gov_work(struct work_struct *work)
+{
+        struct spu_gov_info_struct *info;
+        int delay;
+        unsigned long target_freq;
+
+        info = container_of(work, struct spu_gov_info_struct, work.work);
+
+        /* after cancel_delayed_work_sync we unset info->policy */
+        BUG_ON(info->policy == NULL);
+
+        target_freq = calc_freq(info);
+        __cpufreq_driver_target(info->policy, target_freq, CPUFREQ_RELATION_H);
+
+        delay = usecs_to_jiffies(info->poll_int);
+        queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay);
+}
+
+static void spu_gov_init_work(struct spu_gov_info_struct *info)
+{
+        int delay = usecs_to_jiffies(info->poll_int);
+        INIT_DELAYED_WORK_DEFERRABLE(&info->work, spu_gov_work);
+        queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay);
+}
+
+static void spu_gov_cancel_work(struct spu_gov_info_struct *info)
+{
+        cancel_delayed_work_sync(&info->work);
+}
+
+static int spu_gov_govern(struct cpufreq_policy *policy, unsigned int event)
+{
+        unsigned int cpu = policy->cpu;
+        struct spu_gov_info_struct *info, *affected_info;
+        int i;
+        int ret = 0;
+
+        info = &per_cpu(spu_gov_info, cpu);
+
+        switch (event) {
+        case CPUFREQ_GOV_START:
+                if (!cpu_online(cpu)) {
+                        printk(KERN_ERR "cpu %d is not online\n", cpu);
+                        ret = -EINVAL;
+                        break;
+                }
+
+                if (!policy->cur) {
+                        printk(KERN_ERR "no cpu specified in policy\n");
+                        ret = -EINVAL;
+                        break;
+                }
+
+                /* initialize spu_gov_info for all affected cpus */
+                for_each_cpu_mask(i, policy->cpus) {
+                        affected_info = &per_cpu(spu_gov_info, i);
+                        affected_info->policy = policy;
+                }
+
+                info->poll_int = POLL_TIME;
+
+                /* setup timer */
+                spu_gov_init_work(info);
+
+                break;
+
+        case CPUFREQ_GOV_STOP:
+                /* cancel timer */
+                spu_gov_cancel_work(info);
+
+                /* clean spu_gov_info for all affected cpus */
+                for_each_cpu_mask (i, policy->cpus) {
+                        info = &per_cpu(spu_gov_info, i);
+                        info->policy = NULL;
+                }
+
+                break;
+        }
+
+        return ret;
+}
+
+static struct cpufreq_governor spu_governor = {
+        .name = "spudemand",
+        .governor = spu_gov_govern,
+        .owner = THIS_MODULE,
+};
+
+/*
+ * module init and destoy
+ */
+
+static int __init spu_gov_init(void)
+{
+        int ret;
+
+        kspugov_wq = create_workqueue("kspugov");
+        if (!kspugov_wq) {
+                printk(KERN_ERR "creation of kspugov failed\n");
+                ret = -EFAULT;
+                goto out;
+        }
+
+        ret = cpufreq_register_governor(&spu_governor);
+        if (ret) {
+                printk(KERN_ERR "registration of governor failed\n");
+                destroy_workqueue(kspugov_wq);
+                goto out;
+        }
+out:
+        return ret;
+}
+
+static void __exit spu_gov_exit(void)
+{
+        cpufreq_unregister_governor(&spu_governor);
+        destroy_workqueue(kspugov_wq);
+}
+
+
+module_init(spu_gov_init);
+module_exit(spu_gov_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index eeacb3a52ca1..e06420af5fe9 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -172,8 +172,9 @@ static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
         }
 }
 
-static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
-                unsigned long uaddr, enum dma_data_direction direction)
+static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
+                unsigned long uaddr, enum dma_data_direction direction,
+                struct dma_attrs *attrs)
 {
         int i;
         unsigned long *io_pte, base_pte;
@@ -198,6 +199,8 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
         base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW |
                 (window->ioid & IOPTE_IOID_Mask);
 #endif
+        if (unlikely(dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)))
+                base_pte &= ~IOPTE_SO_RW;
 
         io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
@@ -210,6 +213,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 
         pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n",
                  index, npages, direction, base_pte);
+        return 0;
 }
 
 static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
@@ -519,7 +523,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 
         __set_bit(0, window->table.it_map);
         tce_build_cell(&window->table, window->table.it_offset, 1,
-                       (unsigned long)iommu->pad_page, DMA_TO_DEVICE);
+                       (unsigned long)iommu->pad_page, DMA_TO_DEVICE, NULL);
         window->table.it_hint = window->table.it_blocksize;
 
         return window;
@@ -538,7 +542,9 @@ static struct cbe_iommu *cell_iommu_for_node(int nid)
 static unsigned long cell_dma_direct_offset;
 
 static unsigned long dma_iommu_fixed_base;
-struct dma_mapping_ops dma_iommu_fixed_ops;
+
+/* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */
+static int iommu_fixed_is_weak;
 
 static struct iommu_table *cell_get_iommu_table(struct device *dev)
 {
@@ -562,6 +568,98 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev)
         return &window->table;
 }
 
+/* A coherent allocation implies strong ordering */
+
+static void *dma_fixed_alloc_coherent(struct device *dev, size_t size,
+                                      dma_addr_t *dma_handle, gfp_t flag)
+{
+        if (iommu_fixed_is_weak)
+                return iommu_alloc_coherent(dev, cell_get_iommu_table(dev),
+                                            size, dma_handle,
+                                            device_to_mask(dev), flag,
+                                            dev->archdata.numa_node);
+        else
+                return dma_direct_ops.alloc_coherent(dev, size, dma_handle,
+                                                     flag);
+}
+
+static void dma_fixed_free_coherent(struct device *dev, size_t size,
+                                    void *vaddr, dma_addr_t dma_handle)
+{
+        if (iommu_fixed_is_weak)
+                iommu_free_coherent(cell_get_iommu_table(dev), size, vaddr,
+                                    dma_handle);
+        else
+                dma_direct_ops.free_coherent(dev, size, vaddr, dma_handle);
+}
+
+static dma_addr_t dma_fixed_map_single(struct device *dev, void *ptr,
+                                       size_t size,
+                                       enum dma_data_direction direction,
+                                       struct dma_attrs *attrs)
+{
+        if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+                return dma_direct_ops.map_single(dev, ptr, size, direction,
+                                                 attrs);
+        else
+                return iommu_map_single(dev, cell_get_iommu_table(dev), ptr,
+                                        size, device_to_mask(dev), direction,
+                                        attrs);
+}
+
+static void dma_fixed_unmap_single(struct device *dev, dma_addr_t dma_addr,
+                                   size_t size,
+                                   enum dma_data_direction direction,
+                                   struct dma_attrs *attrs)
+{
+        if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+                dma_direct_ops.unmap_single(dev, dma_addr, size, direction,
+                                            attrs);
+        else
+                iommu_unmap_single(cell_get_iommu_table(dev), dma_addr, size,
+                                   direction, attrs);
+}
+
+static int dma_fixed_map_sg(struct device *dev, struct scatterlist *sg,
+                           int nents, enum dma_data_direction direction,
+                           struct dma_attrs *attrs)
+{
+        if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+                return dma_direct_ops.map_sg(dev, sg, nents, direction, attrs);
+        else
+                return iommu_map_sg(dev, cell_get_iommu_table(dev), sg, nents,
+                                    device_to_mask(dev), direction, attrs);
+}
+
+static void dma_fixed_unmap_sg(struct device *dev, struct scatterlist *sg,
+                               int nents, enum dma_data_direction direction,
+                               struct dma_attrs *attrs)
+{
+        if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+                dma_direct_ops.unmap_sg(dev, sg, nents, direction, attrs);
+        else
+                iommu_unmap_sg(cell_get_iommu_table(dev), sg, nents, direction,
+                               attrs);
+}
+
+static int dma_fixed_dma_supported(struct device *dev, u64 mask)
+{
+        return mask == DMA_64BIT_MASK;
+}
+
+static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask);
+
+struct dma_mapping_ops dma_iommu_fixed_ops = {
+        .alloc_coherent = dma_fixed_alloc_coherent,
+        .free_coherent  = dma_fixed_free_coherent,
+        .map_single     = dma_fixed_map_single,
+        .unmap_single   = dma_fixed_unmap_single,
+        .map_sg         = dma_fixed_map_sg,
+        .unmap_sg       = dma_fixed_unmap_sg,
+        .dma_supported  = dma_fixed_dma_supported,
+        .set_dma_mask   = dma_set_mask_and_switch,
+};
+
 static void cell_dma_dev_setup_fixed(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
@@ -918,9 +1016,16 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
 
         pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
 
-        base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW
+        base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M
                     | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
 
+        if (iommu_fixed_is_weak)
+                pr_info("IOMMU: Using weak ordering for fixed mapping\n");
+        else {
+                pr_info("IOMMU: Using strong ordering for fixed mapping\n");
+                base_pte |= IOPTE_SO_RW;
+        }
+
         for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
                 /* Don't touch the dynamic region */
                 ioaddr = uaddr + fbase;
@@ -1036,9 +1141,6 @@ static int __init cell_iommu_fixed_mapping_init(void)
                 cell_iommu_setup_window(iommu, np, dbase, dsize, 0);
         }
 
-        dma_iommu_fixed_ops = dma_direct_ops;
-        dma_iommu_fixed_ops.set_dma_mask = dma_set_mask_and_switch;
-
         dma_iommu_ops.set_dma_mask = dma_set_mask_and_switch;
         set_pci_dma_ops(&dma_iommu_ops);
 
@@ -1049,9 +1151,23 @@ static int iommu_fixed_disabled;
 
 static int __init setup_iommu_fixed(char *str)
 {
+        struct device_node *pciep;
+
         if (strcmp(str, "off") == 0)
                 iommu_fixed_disabled = 1;
 
+        /* If we can find a pcie-endpoint in the device tree assume that
+         * we're on a triblade or a CAB so by default the fixed mapping
+         * should be set to be weakly ordered; but only if the boot
+         * option WASN'T set for strong ordering
+         */
+        pciep = of_find_node_by_type(NULL, "pcie-endpoint");
+
+        if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0))
+                iommu_fixed_is_weak = 1;
+
+        of_node_put(pciep);
+
         return 1;
 }
 __setup("iommu_fixed=", setup_iommu_fixed);
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 8a3631ce912b..efdacc829576 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -38,8 +38,6 @@
 
 #include "pervasive.h"
 
-static int sysreset_hack;
-
 static void cbe_power_save(void)
 {
         unsigned long ctrl, thread_switch_control;
@@ -87,9 +85,6 @@ static void cbe_power_save(void)
 
 static int cbe_system_reset_exception(struct pt_regs *regs)
 {
-        int cpu;
-        struct cbe_pmd_regs __iomem *pmd;
-
         switch (regs->msr & SRR1_WAKEMASK) {
         case SRR1_WAKEEE:
                 do_IRQ(regs);
@@ -98,19 +93,7 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
                 timer_interrupt(regs);
                 break;
         case SRR1_WAKEMT:
-                /*
-                 * The BMC can inject user triggered system reset exceptions,
-                 * but cannot set the system reset reason in srr1,
-                 * so check an extra register here.
-                 */
-                if (sysreset_hack && (cpu = smp_processor_id()) == 0) {
-                        pmd = cbe_get_cpu_pmd_regs(cpu);
-                        if (in_be64(&pmd->ras_esc_0) & 0xffff) {
-                                out_be64(&pmd->ras_esc_0, 0);
-                                return 0;
-                        }
-                }
-                break;
+                return cbe_sysreset_hack();
 #ifdef CONFIG_CBE_RAS
         case SRR1_WAKESYSERR:
                 cbe_system_error_exception(regs);
@@ -134,8 +117,6 @@ void __init cbe_pervasive_init(void)
         if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
                 return;
 
-        sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
-
         for_each_possible_cpu(cpu) {
                 struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu);
                 if (!regs)
@@ -144,12 +125,6 @@ void __init cbe_pervasive_init(void)
                  /* Enable Pause(0) control bit */
                 out_be64(&regs->pmcr, in_be64(&regs->pmcr) |
                                             CBE_PMD_PAUSE_ZERO_CONTROL);
-
-                /* Enable JTAG system-reset hack */
-                if (sysreset_hack)
-                        out_be32(&regs->fir_mode_reg,
-                                in_be32(&regs->fir_mode_reg) |
-                                CBE_PMD_FIR_MODE_M8);
         }
 
         ppc_md.power_save = cbe_power_save;
diff --git a/arch/powerpc/platforms/cell/pervasive.h b/arch/powerpc/platforms/cell/pervasive.h
index 7b50947f8044..fd4d7b7092b4 100644
--- a/arch/powerpc/platforms/cell/pervasive.h
+++ b/arch/powerpc/platforms/cell/pervasive.h
@@ -30,4 +30,13 @@ extern void cbe_system_error_exception(struct pt_regs *regs);
 extern void cbe_maintenance_exception(struct pt_regs *regs);
 extern void cbe_thermal_exception(struct pt_regs *regs);
 
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+extern int cbe_sysreset_hack(void);
+#else
+static inline int cbe_sysreset_hack(void)
+{
+        return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
 #endif
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 505f9b9bdf0c..2a14b052abcd 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -236,6 +236,52 @@ static struct notifier_block cbe_ptcal_reboot_notifier = {
         .notifier_call = cbe_ptcal_notify_reboot
 };
 
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+static int sysreset_hack;
+
+static int __init cbe_sysreset_init(void)
+{
+        struct cbe_pmd_regs __iomem *regs;
+
+        sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+        if (!sysreset_hack)
+                return 0;
+
+        regs = cbe_get_cpu_pmd_regs(0);
+        if (!regs)
+                return 0;
+
+        /* Enable JTAG system-reset hack */
+        out_be32(&regs->fir_mode_reg,
+                in_be32(&regs->fir_mode_reg) |
+                CBE_PMD_FIR_MODE_M8);
+
+        return 0;
+}
+device_initcall(cbe_sysreset_init);
+
+int cbe_sysreset_hack(void)
+{
+        struct cbe_pmd_regs __iomem *regs;
+
+        /*
+         * The BMC can inject user triggered system reset exceptions,
+         * but cannot set the system reset reason in srr1,
+         * so check an extra register here.
+         */
+        if (sysreset_hack && (smp_processor_id() == 0)) {
+                regs = cbe_get_cpu_pmd_regs(0);
+                if (!regs)
+                        return 0;
+                if (in_be64(&regs->ras_esc_0) & 0x0000ffff) {
+                        out_be64(&regs->ras_esc_0, 0);
+                        return 0;
+                }
+        }
+        return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
 int __init cbe_ptcal_init(void)
 {
         int ret;
diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index 418b605ac35a..5122ec145271 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -111,7 +111,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
 
         dummy_page_da = dma_map_single(phb->parent, dummy_page_va,
                                        PAGE_SIZE, DMA_FROM_DEVICE);
-        if (dma_mapping_error(dummy_page_da)) {
+        if (dma_mapping_error(phb->parent, dummy_page_da)) {
                 pr_err("SPIDER-IOWA:Map dummy page filed.\n");
                 kfree(dummy_page_va);
                 return -1;
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 78f905bc6a42..a5bdb89a17c3 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -703,7 +703,8 @@ static unsigned long long spu_acct_time(struct spu *spu,
 }
 
 
-static ssize_t spu_stat_show(struct sys_device *sysdev, char *buf)
+static ssize_t spu_stat_show(struct sys_device *sysdev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         struct spu *spu = container_of(sysdev, struct spu, sysdev);
 
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 99c73066b82f..010a51f59796 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -288,9 +288,32 @@ spufs_mem_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
         return VM_FAULT_NOPAGE;
 }
 
+static int spufs_mem_mmap_access(struct vm_area_struct *vma,
+                                unsigned long address,
+                                void *buf, int len, int write)
+{
+        struct spu_context *ctx = vma->vm_file->private_data;
+        unsigned long offset = address - vma->vm_start;
+        char *local_store;
+
+        if (write && !(vma->vm_flags & VM_WRITE))
+                return -EACCES;
+        if (spu_acquire(ctx))
+                return -EINTR;
+        if ((offset + len) > vma->vm_end)
+                len = vma->vm_end - offset;
+        local_store = ctx->ops->get_ls(ctx);
+        if (write)
+                memcpy_toio(local_store + offset, buf, len);
+        else
+                memcpy_fromio(buf, local_store + offset, len);
+        spu_release(ctx);
+        return len;
+}
 
 static struct vm_operations_struct spufs_mem_mmap_vmops = {
         .fault = spufs_mem_mmap_fault,
+        .access = spufs_mem_mmap_access,
 };
 
 static int spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 7123472801d9..690ca7b0dcf6 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -78,7 +78,7 @@ spufs_destroy_inode(struct inode *inode)
 }
 
 static void
-spufs_init_once(struct kmem_cache *cachep, void *p)
+spufs_init_once(void *p)
 {
         struct spufs_inode_info *ei = p;
 
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 34654743363d..2deeeba7eccf 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -312,11 +312,28 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff,
          */
         node = cpu_to_node(raw_smp_processor_id());
         for (n = 0; n < MAX_NUMNODES; n++, node++) {
+                int available_spus;
+
                 node = (node < MAX_NUMNODES) ? node : 0;
                 if (!node_allowed(ctx, node))
                         continue;
+
+                available_spus = 0;
                 mutex_lock(&cbe_spu_info[node].list_mutex);
                 list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
+                        if (spu->ctx && spu->ctx->gang
+                                        && spu->ctx->aff_offset == 0)
+                                available_spus -=
+                                        (spu->ctx->gang->contexts - 1);
+                        else
+                                available_spus++;
+                }
+                if (available_spus < ctx->gang->contexts) {
+                        mutex_unlock(&cbe_spu_info[node].list_mutex);
+                        continue;
+                }
+
+                list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
                         if ((!mem_aff || spu->has_mem_affinity) &&
                                                         sched_spu(spu)) {
                                 mutex_unlock(&cbe_spu_info[node].list_mutex);
@@ -389,6 +406,9 @@ static int has_affinity(struct spu_context *ctx)
         if (list_empty(&ctx->aff_list))
                 return 0;
 
+        if (atomic_read(&ctx->gang->aff_sched_count) == 0)
+                ctx->gang->aff_ref_spu = NULL;
+
         if (!gang->aff_ref_spu) {
                 if (!(gang->aff_flags & AFF_MERGED))
                         aff_merge_remaining_ctxs(gang);
@@ -416,14 +436,8 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
         if (spu->ctx->flags & SPU_CREATE_NOSCHED)
                 atomic_dec(&cbe_spu_info[spu->node].reserved_spus);
 
-        if (ctx->gang){
-                mutex_lock(&ctx->gang->aff_mutex);
-                if (has_affinity(ctx)) {
-                        if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-                                ctx->gang->aff_ref_spu = NULL;
-                }
-                mutex_unlock(&ctx->gang->aff_mutex);
-        }
+        if (ctx->gang)
+                atomic_dec_if_positive(&ctx->gang->aff_sched_count);
 
         spu_switch_notify(spu, NULL);
         spu_unmap_mappings(ctx);
@@ -562,10 +576,7 @@ static struct spu *spu_get_idle(struct spu_context *ctx)
                                 goto found;
                         mutex_unlock(&cbe_spu_info[node].list_mutex);
 
-                        mutex_lock(&ctx->gang->aff_mutex);
-                        if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-                                ctx->gang->aff_ref_spu = NULL;
-                        mutex_unlock(&ctx->gang->aff_mutex);
+                        atomic_dec(&ctx->gang->aff_sched_count);
                         goto not_found;
                 }
                 mutex_unlock(&ctx->gang->aff_mutex);
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 8c0e95766a62..92d20e993ede 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -196,8 +196,7 @@ static int __init sputrace_init(void)
         struct proc_dir_entry *entry;
         int i, error = -ENOMEM;
 
-        sputrace_log = kcalloc(sizeof(struct sputrace),
-                                bufsize, GFP_KERNEL);
+        sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL);
         if (!sputrace_log)
                 goto out;
 
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 609c46db4a1b..768c262b9368 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -367,7 +367,7 @@ static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
         viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
         if (!viaisa)
                 return;
-        printk("Fixing VIA IDE, force legacy mode on '%s'\n", viaide->dev.bus_id);
+        dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");
 
         pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
         pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index afc9141be63e..ef74a0763ec1 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -51,15 +51,13 @@ u8 uli_pirq_to_irq[8] = {
         ULI_8259_NONE,          /* PIRQH */
 };
 
-/* set in board code if you want this quirks to do something */
-int uses_fsl_uli_m1575;
-
 /* Bridge */
 static void __devinit early_uli5249(struct pci_dev *dev)
 {
         unsigned char temp;
 
-        if (!uses_fsl_uli_m1575)
+        if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+                        !machine_is(mpc8572_ds))
                 return;
 
         pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -82,7 +80,8 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
 {
         int i;
 
-        if (!uses_fsl_uli_m1575)
+        if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+                        !machine_is(mpc8572_ds))
                 return;
 
         /*
@@ -150,7 +149,8 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
          * IRQ 14: Edge
          * IRQ 15: Edge
          */
-        if (!uses_fsl_uli_m1575)
+        if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+                        !machine_is(mpc8572_ds))
                 return;
 
         outb(0xfa, 0x4d0);
@@ -176,7 +176,8 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
         unsigned char c;
         unsigned int d;
 
-        if (!uses_fsl_uli_m1575)
+        if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+                        !machine_is(mpc8572_ds))
                 return;
 
         /* read/write lock */
@@ -200,7 +201,8 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
 {
         unsigned short temp;
 
-        if (!uses_fsl_uli_m1575)
+        if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+                        !machine_is(mpc8572_ds))
                 return;
 
         pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -221,7 +223,7 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev)
         for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
                 if ((bus->resource[i]) &&
                         (bus->resource[i]->flags & IORESOURCE_MEM)) {
-                        dummy = ioremap(bus->resource[i]->start, 0x4);
+                        dummy = ioremap(bus->resource[i]->end - 3, 0x4);
                         if (dummy) {
                                 in_8(dummy);
                                 iounmap(dummy);
@@ -238,6 +240,103 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
 
+static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
+{
+        u32 temp32;
+
+        if (!machine_is(mpc86xx_hpcd))
+                return;
+
+        /* Disable INTx */
+        pci_read_config_dword(dev, 0x48, &temp32);
+        pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
+
+        /* Enable sideband interrupt */
+        pci_read_config_dword(dev, 0x90, &temp32);
+        pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
+}
+
+static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
+{
+        unsigned char c;
+        unsigned short temp;
+
+        if (!machine_is(mpc86xx_hpcd))
+                return;
+
+        /* Interrupt Disable, Needed when SATA disabled */
+        pci_read_config_word(dev, PCI_COMMAND, &temp);
+        temp |= 1<<10;
+        pci_write_config_word(dev, PCI_COMMAND, temp);
+
+        pci_read_config_byte(dev, 0x83, &c);
+        c |= 0x80;
+        pci_write_config_byte(dev, 0x83, c);
+
+        pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+        pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
+
+        pci_read_config_byte(dev, 0x83, &c);
+        c &= 0x7f;
+        pci_write_config_byte(dev, 0x83, c);
+}
+
+/*
+ * Since 8259PIC was disabled on the board, the IDE device can not
+ * use the legacy IRQ, we need to let the IDE device work under
+ * native mode and use the interrupt line like other PCI devices.
+ * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
+ * as the interrupt for IDE device.
+ */
+static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev)
+{
+        unsigned char c;
+
+        if (!machine_is(mpc86xx_hpcd))
+                return;
+
+        pci_read_config_byte(dev, 0x4b, &c);
+        c |= 0x10;
+        pci_write_config_byte(dev, 0x4b, c);
+}
+
+/*
+ * SATA interrupt pin bug fix
+ * There's a chip bug for 5288, The interrupt pin should be 2,
+ * not the read only value 1, So it use INTB#, not INTA# which
+ * actually used by the IDE device 5229.
+ * As of this bug, during the PCI initialization, 5288 read the
+ * irq of IDE device from the device tree, this function fix this
+ * bug by re-assigning a correct irq to 5288.
+ *
+ */
+static void __devinit hpcd_final_uli5288(struct pci_dev *dev)
+{
+        struct pci_controller *hose = pci_bus_to_host(dev->bus);
+        struct device_node *hosenode = hose ? hose->dn : NULL;
+        struct of_irq oirq;
+        int virq, pin = 2;
+        u32 laddr[3];
+
+        if (!machine_is(mpc86xx_hpcd))
+                return;
+
+        if (!hosenode)
+                return;
+
+        laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
+        laddr[1] = laddr[2] = 0;
+        of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+        virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+                                     oirq.size);
+        dev->irq = virq;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
+
 int uli_exclude_device(struct pci_controller *hose,
                         u_char bus, u_char devfn)
 {
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 761d9e971fc4..ea3e541ac74f 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -2,6 +2,7 @@ config PPC_ISERIES
         bool "IBM Legacy iSeries"
         depends on PPC_MULTIPLATFORM && PPC64
         select PPC_INDIRECT_IO
+        select PPC_PCI_CHOICE if EMBEDDED
 
 menu "iSeries device drivers"
         depends on PPC_ISERIES
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index ab5d8687c3cf..bb464d1211b2 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -41,8 +41,9 @@
 #include <asm/iseries/hv_call_event.h>
 #include <asm/iseries/iommu.h>
 
-static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
-                unsigned long uaddr, enum dma_data_direction direction)
+static int tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
+                unsigned long uaddr, enum dma_data_direction direction,
+                struct dma_attrs *attrs)
 {
         u64 rc;
         u64 tce, rpn;
@@ -70,6 +71,7 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
                 index++;
                 uaddr += TCE_PAGE_SIZE;
         }
+        return 0;
 }
 
 static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages)
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 1dc7295746da..731d7b157749 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -871,7 +871,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off,
                 count = 256 - off;
 
         dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE);
-        if (dma_mapping_error(dma_addr))
+        if (dma_mapping_error(NULL, dma_addr))
                 return -ENOMEM;
         memset(page, 0, off + count);
         memset(&vsp_cmd, 0, sizeof(vsp_cmd));
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index b72120751bbe..70b688c1aefb 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -561,7 +561,7 @@ static void yield_shared_processor(void)
 static void iseries_shared_idle(void)
 {
         while (1) {
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 while (!need_resched() && !hvlpevent_is_pending()) {
                         local_irq_disable();
                         ppc64_runlatch_off();
@@ -591,7 +591,7 @@ static void iseries_dedicated_idle(void)
         set_thread_flag(TIF_POLLING_NRFLAG);
 
         while (1) {
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 if (!need_resched()) {
                         while (!need_resched()) {
                                 ppc64_runlatch_off();
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 86967bdd8774..a0ff03a3d8da 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -83,9 +83,10 @@ static u32 *iob_l2_base;
 static struct iommu_table iommu_table_iobmap;
 static int iommu_table_iobmap_inited;
 
-static void iobmap_build(struct iommu_table *tbl, long index,
+static int iobmap_build(struct iommu_table *tbl, long index,
                          long npages, unsigned long uaddr,
-                         enum dma_data_direction direction)
+                         enum dma_data_direction direction,
+                         struct dma_attrs *attrs)
 {
         u32 *ip;
         u32 rpn;
@@ -107,6 +108,7 @@ static void iobmap_build(struct iommu_table *tbl, long index,
                 uaddr += IOBMAP_PAGE_SIZE;
                 bus_addr += IOBMAP_PAGE_SIZE;
         }
+        return 0;
 }
 
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 00bd0166d07f..88ccf3a08a9c 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -97,8 +97,6 @@ extern struct machdep_calls pmac_md;
 int sccdbg;
 #endif
 
-extern void zs_kgdb_hook(int tty_num);
-
 sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
 EXPORT_SYMBOL(sys_ctrler);
 
@@ -329,10 +327,6 @@ static void __init pmac_setup_arch(void)
         l2cr_init();
 #endif /* CONFIG_PPC32 */
 
-#ifdef CONFIG_KGDB
-        zs_kgdb_hook(0);
-#endif
-
         find_via_cuda();
         find_via_pmu();
         smu_init();
@@ -547,6 +541,78 @@ static int __init pmac_declare_of_platform_devices(void)
 }
 machine_device_initcall(powermac, pmac_declare_of_platform_devices);
 
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+/*
+ * This is called very early, as part of console_init() (typically just after
+ * time_init()). This function is respondible for trying to find a good
+ * default console on serial ports. It tries to match the open firmware
+ * default output with one of the available serial console drivers.
+ */
+static int __init check_pmac_serial_console(void)
+{
+        struct device_node *prom_stdout = NULL;
+        int offset = 0;
+        const char *name;
+#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
+        char *devname = "ttyS";
+#else
+        char *devname = "ttyPZ";
+#endif
+
+        pr_debug(" -> check_pmac_serial_console()\n");
+
+        /* The user has requested a console so this is already set up. */
+        if (strstr(boot_command_line, "console=")) {
+                pr_debug(" console was specified !\n");
+                return -EBUSY;
+        }
+
+        if (!of_chosen) {
+                pr_debug(" of_chosen is NULL !\n");
+                return -ENODEV;
+        }
+
+        /* We are getting a weird phandle from OF ... */
+        /* ... So use the full path instead */
+        name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+        if (name == NULL) {
+                pr_debug(" no linux,stdout-path !\n");
+                return -ENODEV;
+        }
+        prom_stdout = of_find_node_by_path(name);
+        if (!prom_stdout) {
+                pr_debug(" can't find stdout package %s !\n", name);
+                return -ENODEV;
+        }
+        pr_debug("stdout is %s\n", prom_stdout->full_name);
+
+        name = of_get_property(prom_stdout, "name", NULL);
+        if (!name) {
+                pr_debug(" stdout package has no name !\n");
+                goto not_found;
+        }
+
+        if (strcmp(name, "ch-a") == 0)
+                offset = 0;
+        else if (strcmp(name, "ch-b") == 0)
+                offset = 1;
+        else
+                goto not_found;
+        of_node_put(prom_stdout);
+
+        pr_debug("Found serial console at %s%d\n", devname, offset);
+
+        return add_preferred_console(devname, offset, NULL);
+
+ not_found:
+        pr_debug("No preferred console found !\n");
+        of_node_put(prom_stdout);
+        return -ENODEV;
+}
+console_initcall(check_pmac_serial_console);
+
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 47de4d3fc167..572771fd8463 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -125,13 +125,23 @@ void udbg_scc_init(int force_scc)
         out_8(sccc, 0xc0);
 
         /* If SCC was the OF output port, read the BRG value, else
-         * Setup for 57600 8N1
+         * Setup for 38400 or 57600 8N1 depending on the machine
          */
         if (ch_def != NULL) {
                 out_8(sccc, 13);
                 scc_inittab[1] = in_8(sccc);
                 out_8(sccc, 12);
                 scc_inittab[3] = in_8(sccc);
+        } else if (machine_is_compatible("RackMac1,1")
+                   || machine_is_compatible("RackMac1,2")
+                   || machine_is_compatible("MacRISC4")) {
+                /* Xserves and G5s default to 57600 */
+                scc_inittab[1] = 0;
+                scc_inittab[3] = 0;
+        } else {
+                /* Others default to 38400 */
+                scc_inittab[1] = 0;
+                scc_inittab[3] = 1;
         }
 
         for (i = 0; i < sizeof(scc_inittab); ++i)
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index a5f4e95dfc3d..920cf7a454b1 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -8,6 +8,7 @@ config PPC_PS3
         select USB_ARCH_HAS_EHCI
         select USB_EHCI_BIG_ENDIAN_MMIO
         select MEMORY_HOTPLUG
+        select PPC_PCI_CHOICE
         help
           This option enables support for the Sony PS3 game console
           and other platforms using the PS3 hypervisor.  Enabling this
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 3866debfa3c4..ffdd8e963fbd 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -486,6 +486,7 @@ static int __init ps3_register_graphics_devices(void)
                 return -ENOMEM;
 
         p->dev.match_id = PS3_MATCH_ID_GRAPHICS;
+        p->dev.match_sub_id = PS3_MATCH_SUB_ID_FB;
         p->dev.dev_type = PS3_DEVICE_TYPE_IOC0;
 
         result = ps3_system_bus_device_register(&p->dev);
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index d66c3628a112..280ee88cb0b0 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -347,16 +347,23 @@ static int ps3_system_bus_match(struct device *_dev,
         struct ps3_system_bus_driver *drv = ps3_drv_to_system_bus_drv(_drv);
         struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 
-        result = dev->match_id == drv->match_id;
+        if (!dev->match_sub_id)
+                result = dev->match_id == drv->match_id;
+        else
+                result = dev->match_sub_id == drv->match_sub_id &&
+                        dev->match_id == drv->match_id;
 
         if (result)
-                pr_info("%s:%d: dev=%u(%s), drv=%u(%s): match\n", __func__,
-                        __LINE__, dev->match_id, dev->core.bus_id,
-                        drv->match_id, drv->core.name);
+                pr_info("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): match\n",
+                        __func__, __LINE__,
+                        dev->match_id, dev->match_sub_id, dev->core.bus_id,
+                        drv->match_id, drv->match_sub_id, drv->core.name);
         else
-                pr_debug("%s:%d: dev=%u(%s), drv=%u(%s): miss\n", __func__,
-                        __LINE__, dev->match_id, dev->core.bus_id,
-                        drv->match_id, drv->core.name);
+                pr_debug("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): miss\n",
+                        __func__, __LINE__,
+                        dev->match_id, dev->match_sub_id, dev->core.bus_id,
+                        drv->match_id, drv->match_sub_id, drv->core.name);
+
         return result;
 }
 
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 07fe5b69b9e2..97619fd51e39 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -7,6 +7,7 @@ config PPC_PSERIES
         select RTAS_ERROR_LOGGING
         select PPC_UDBG_16550
         select PPC_NATIVE
+        select PPC_PCI_CHOICE if EMBEDDED
         default y
 
 config PPC_SPLPAR
@@ -39,3 +40,26 @@ config PPC_PSERIES_DEBUG
         depends on PPC_PSERIES && PPC_EARLY_DEBUG
         bool "Enable extra debug logging in platforms/pseries"
         default y
+
+config PPC_SMLPAR
+        bool "Support for shared-memory logical partitions"
+        depends on PPC_PSERIES
+        select LPARCFG
+        default n
+        help
+          Select this option to enable shared memory partition support.
+          With this option a system running in an LPAR can be given more
+          memory than physically available and will allow firmware to
+          balance memory across many LPARs.
+
+config CMM
+        tristate "Collaborative memory management"
+        depends on PPC_SMLPAR
+        default y
+        help
+          Select this option, if you want to enable the kernel interface
+          to reduce the memory size of the system. This is accomplished
+          by allocating pages of memory and put them "on hold". This only
+          makes sense for a system running in an LPAR where the unused pages
+          will be reused for other LPARs. The interface allows firmware to
+          balance memory across many LPARs.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 554c6e42ef2a..dfe574af2dc0 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)              += hvcserver.o
 obj-$(CONFIG_HCALL_STATS)       += hvCall_inst.o
 obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o
+obj-$(CONFIG_CMM)               += cmm.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
new file mode 100644
index 000000000000..38fe32a7cc70
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -0,0 +1,472 @@
+/*
+ * Collaborative memory management interface.
+ *
+ * Copyright (C) 2008 IBM Corporation
+ * Author(s): Brian King (brking@linux.vnet.ibm.com),
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/oom.h>
+#include <linux/sched.h>
+#include <linux/stringify.h>
+#include <linux/swap.h>
+#include <linux/sysdev.h>
+#include <asm/firmware.h>
+#include <asm/hvcall.h>
+#include <asm/mmu.h>
+#include <asm/pgalloc.h>
+#include <asm/uaccess.h>
+
+#include "plpar_wrappers.h"
+
+#define CMM_DRIVER_VERSION      "1.0.0"
+#define CMM_DEFAULT_DELAY       1
+#define CMM_DEBUG                       0
+#define CMM_DISABLE             0
+#define CMM_OOM_KB              1024
+#define CMM_MIN_MEM_MB          256
+#define KB2PAGES(_p)            ((_p)>>(PAGE_SHIFT-10))
+#define PAGES2KB(_p)            ((_p)<<(PAGE_SHIFT-10))
+
+static unsigned int delay = CMM_DEFAULT_DELAY;
+static unsigned int oom_kb = CMM_OOM_KB;
+static unsigned int cmm_debug = CMM_DEBUG;
+static unsigned int cmm_disabled = CMM_DISABLE;
+static unsigned long min_mem_mb = CMM_MIN_MEM_MB;
+static struct sys_device cmm_sysdev;
+
+MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CMM_DRIVER_VERSION);
+
+module_param_named(delay, delay, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. "
+                 "[Default=" __stringify(CMM_DEFAULT_DELAY) "]");
+module_param_named(oom_kb, oom_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. "
+                 "[Default=" __stringify(CMM_OOM_KB) "]");
+module_param_named(min_mem_mb, min_mem_mb, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(min_mem_mb, "Minimum amount of memory (in MB) to not balloon. "
+                 "[Default=" __stringify(CMM_MIN_MEM_MB) "]");
+module_param_named(debug, cmm_debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable module debugging logging. Set to 1 to enable. "
+                 "[Default=" __stringify(CMM_DEBUG) "]");
+
+#define CMM_NR_PAGES ((PAGE_SIZE - sizeof(void *) - sizeof(unsigned long)) / sizeof(unsigned long))
+
+#define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); }
+
+struct cmm_page_array {
+        struct cmm_page_array *next;
+        unsigned long index;
+        unsigned long page[CMM_NR_PAGES];
+};
+
+static unsigned long loaned_pages;
+static unsigned long loaned_pages_target;
+static unsigned long oom_freed_pages;
+
+static struct cmm_page_array *cmm_page_list;
+static DEFINE_SPINLOCK(cmm_lock);
+
+static struct task_struct *cmm_thread_ptr;
+
+/**
+ * cmm_alloc_pages - Allocate pages and mark them as loaned
+ * @nr: number of pages to allocate
+ *
+ * Return value:
+ *      number of pages requested to be allocated which were not
+ **/
+static long cmm_alloc_pages(long nr)
+{
+        struct cmm_page_array *pa, *npa;
+        unsigned long addr;
+        long rc;
+
+        cmm_dbg("Begin request for %ld pages\n", nr);
+
+        while (nr) {
+                addr = __get_free_page(GFP_NOIO | __GFP_NOWARN |
+                                       __GFP_NORETRY | __GFP_NOMEMALLOC);
+                if (!addr)
+                        break;
+                spin_lock(&cmm_lock);
+                pa = cmm_page_list;
+                if (!pa || pa->index >= CMM_NR_PAGES) {
+                        /* Need a new page for the page list. */
+                        spin_unlock(&cmm_lock);
+                        npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
+                                                                       __GFP_NORETRY | __GFP_NOMEMALLOC);
+                        if (!npa) {
+                                pr_info("%s: Can not allocate new page list\n", __FUNCTION__);
+                                free_page(addr);
+                                break;
+                        }
+                        spin_lock(&cmm_lock);
+                        pa = cmm_page_list;
+
+                        if (!pa || pa->index >= CMM_NR_PAGES) {
+                                npa->next = pa;
+                                npa->index = 0;
+                                pa = npa;
+                                cmm_page_list = pa;
+                        } else
+                                free_page((unsigned long) npa);
+                }
+
+                if ((rc = plpar_page_set_loaned(__pa(addr)))) {
+                        pr_err("%s: Can not set page to loaned. rc=%ld\n", __FUNCTION__, rc);
+                        spin_unlock(&cmm_lock);
+                        free_page(addr);
+                        break;
+                }
+
+                pa->page[pa->index++] = addr;
+                loaned_pages++;
+                totalram_pages--;
+                spin_unlock(&cmm_lock);
+                nr--;
+        }
+
+        cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+        return nr;
+}
+
+/**
+ * cmm_free_pages - Free pages and mark them as active
+ * @nr: number of pages to free
+ *
+ * Return value:
+ *      number of pages requested to be freed which were not
+ **/
+static long cmm_free_pages(long nr)
+{
+        struct cmm_page_array *pa;
+        unsigned long addr;
+
+        cmm_dbg("Begin free of %ld pages.\n", nr);
+        spin_lock(&cmm_lock);
+        pa = cmm_page_list;
+        while (nr) {
+                if (!pa || pa->index <= 0)
+                        break;
+                addr = pa->page[--pa->index];
+
+                if (pa->index == 0) {
+                        pa = pa->next;
+                        free_page((unsigned long) cmm_page_list);
+                        cmm_page_list = pa;
+                }
+
+                plpar_page_set_active(__pa(addr));
+                free_page(addr);
+                loaned_pages--;
+                nr--;
+                totalram_pages++;
+        }
+        spin_unlock(&cmm_lock);
+        cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+        return nr;
+}
+
+/**
+ * cmm_oom_notify - OOM notifier
+ * @self:       notifier block struct
+ * @dummy:      not used
+ * @parm:       returned - number of pages freed
+ *
+ * Return value:
+ *      NOTIFY_OK
+ **/
+static int cmm_oom_notify(struct notifier_block *self,
+                          unsigned long dummy, void *parm)
+{
+        unsigned long *freed = parm;
+        long nr = KB2PAGES(oom_kb);
+
+        cmm_dbg("OOM processing started\n");
+        nr = cmm_free_pages(nr);
+        loaned_pages_target = loaned_pages;
+        *freed += KB2PAGES(oom_kb) - nr;
+        oom_freed_pages += KB2PAGES(oom_kb) - nr;
+        cmm_dbg("OOM processing complete\n");
+        return NOTIFY_OK;
+}
+
+/**
+ * cmm_get_mpp - Read memory performance parameters
+ *
+ * Makes hcall to query the current page loan request from the hypervisor.
+ *
+ * Return value:
+ *      nothing
+ **/
+static void cmm_get_mpp(void)
+{
+        int rc;
+        struct hvcall_mpp_data mpp_data;
+        unsigned long active_pages_target;
+        signed long page_loan_request;
+
+        rc = h_get_mpp(&mpp_data);
+
+        if (rc != H_SUCCESS)
+                return;
+
+        page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE);
+        loaned_pages_target = page_loan_request + loaned_pages;
+        if (loaned_pages_target > oom_freed_pages)
+                loaned_pages_target -= oom_freed_pages;
+        else
+                loaned_pages_target = 0;
+
+        active_pages_target = totalram_pages + loaned_pages - loaned_pages_target;
+
+        if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE))
+                loaned_pages_target = totalram_pages + loaned_pages -
+                        ((min_mem_mb * 1024 * 1024) / PAGE_SIZE);
+
+        cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n",
+                page_loan_request, loaned_pages, loaned_pages_target,
+                oom_freed_pages, totalram_pages);
+}
+
+static struct notifier_block cmm_oom_nb = {
+        .notifier_call = cmm_oom_notify
+};
+
+/**
+ * cmm_thread - CMM task thread
+ * @dummy:      not used
+ *
+ * Return value:
+ *      0
+ **/
+static int cmm_thread(void *dummy)
+{
+        unsigned long timeleft;
+
+        while (1) {
+                timeleft = msleep_interruptible(delay * 1000);
+
+                if (kthread_should_stop() || timeleft) {
+                        loaned_pages_target = loaned_pages;
+                        break;
+                }
+
+                cmm_get_mpp();
+
+                if (loaned_pages_target > loaned_pages) {
+                        if (cmm_alloc_pages(loaned_pages_target - loaned_pages))
+                                loaned_pages_target = loaned_pages;
+                } else if (loaned_pages_target < loaned_pages)
+                        cmm_free_pages(loaned_pages - loaned_pages_target);
+        }
+        return 0;
+}
+
+#define CMM_SHOW(name, format, args...)                 \
+        static ssize_t show_##name(struct sys_device *dev,      \
+                                   struct sysdev_attribute *attr,       \
+                                   char *buf)                   \
+        {                                                       \
+                return sprintf(buf, format, ##args);            \
+        }                                                       \
+        static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL)
+
+CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages));
+CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
+
+static ssize_t show_oom_pages(struct sys_device *dev,
+                              struct sysdev_attribute *attr, char *buf)
+{
+        return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
+}
+
+static ssize_t store_oom_pages(struct sys_device *dev,
+                               struct sysdev_attribute *attr,
+                               const char *buf, size_t count)
+{
+        unsigned long val = simple_strtoul (buf, NULL, 10);
+
+        if (!capable(CAP_SYS_ADMIN))
+                return -EPERM;
+        if (val != 0)
+                return -EBADMSG;
+
+        oom_freed_pages = 0;
+        return count;
+}
+
+static SYSDEV_ATTR(oom_freed_kb, S_IWUSR| S_IRUGO,
+                   show_oom_pages, store_oom_pages);
+
+static struct sysdev_attribute *cmm_attrs[] = {
+        &attr_loaned_kb,
+        &attr_loaned_target_kb,
+        &attr_oom_freed_kb,
+};
+
+static struct sysdev_class cmm_sysdev_class = {
+        .name = "cmm",
+};
+
+/**
+ * cmm_sysfs_register - Register with sysfs
+ *
+ * Return value:
+ *      0 on success / other on failure
+ **/
+static int cmm_sysfs_register(struct sys_device *sysdev)
+{
+        int i, rc;
+
+        if ((rc = sysdev_class_register(&cmm_sysdev_class)))
+                return rc;
+
+        sysdev->id = 0;
+        sysdev->cls = &cmm_sysdev_class;
+
+        if ((rc = sysdev_register(sysdev)))
+                goto class_unregister;
+
+        for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) {
+                if ((rc = sysdev_create_file(sysdev, cmm_attrs[i])))
+                        goto fail;
+        }
+
+        return 0;
+
+fail:
+        while (--i >= 0)
+                sysdev_remove_file(sysdev, cmm_attrs[i]);
+        sysdev_unregister(sysdev);
+class_unregister:
+        sysdev_class_unregister(&cmm_sysdev_class);
+        return rc;
+}
+
+/**
+ * cmm_unregister_sysfs - Unregister from sysfs
+ *
+ **/
+static void cmm_unregister_sysfs(struct sys_device *sysdev)
+{
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++)
+                sysdev_remove_file(sysdev, cmm_attrs[i]);
+        sysdev_unregister(sysdev);
+        sysdev_class_unregister(&cmm_sysdev_class);
+}
+
+/**
+ * cmm_init - Module initialization
+ *
+ * Return value:
+ *      0 on success / other on failure
+ **/
+static int cmm_init(void)
+{
+        int rc = -ENOMEM;
+
+        if (!firmware_has_feature(FW_FEATURE_CMO))
+                return -EOPNOTSUPP;
+
+        if ((rc = register_oom_notifier(&cmm_oom_nb)) < 0)
+                return rc;
+
+        if ((rc = cmm_sysfs_register(&cmm_sysdev)))
+                goto out_oom_notifier;
+
+        if (cmm_disabled)
+                return rc;
+
+        cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+        if (IS_ERR(cmm_thread_ptr)) {
+                rc = PTR_ERR(cmm_thread_ptr);
+                goto out_unregister_sysfs;
+        }
+
+        return rc;
+
+out_unregister_sysfs:
+        cmm_unregister_sysfs(&cmm_sysdev);
+out_oom_notifier:
+        unregister_oom_notifier(&cmm_oom_nb);
+        return rc;
+}
+
+/**
+ * cmm_exit - Module exit
+ *
+ * Return value:
+ *      nothing
+ **/
+static void cmm_exit(void)
+{
+        if (cmm_thread_ptr)
+                kthread_stop(cmm_thread_ptr);
+        unregister_oom_notifier(&cmm_oom_nb);
+        cmm_free_pages(loaned_pages);
+        cmm_unregister_sysfs(&cmm_sysdev);
+}
+
+/**
+ * cmm_set_disable - Disable/Enable CMM
+ *
+ * Return value:
+ *      0 on success / other on failure
+ **/
+static int cmm_set_disable(const char *val, struct kernel_param *kp)
+{
+        int disable = simple_strtoul(val, NULL, 10);
+
+        if (disable != 0 && disable != 1)
+                return -EINVAL;
+
+        if (disable && !cmm_disabled) {
+                if (cmm_thread_ptr)
+                        kthread_stop(cmm_thread_ptr);
+                cmm_thread_ptr = NULL;
+                cmm_free_pages(loaned_pages);
+        } else if (!disable && cmm_disabled) {
+                cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+                if (IS_ERR(cmm_thread_ptr))
+                        return PTR_ERR(cmm_thread_ptr);
+        }
+
+        cmm_disabled = disable;
+        return 0;
+}
+
+module_param_call(disable, cmm_set_disable, param_get_uint,
+                  &cmm_disabled, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable, "Disable CMM. Set to 1 to disable. "
+                 "[Default=" __stringify(CMM_DISABLE) "]");
+
+module_init(cmm_init);
+module_exit(cmm_exit);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index c027f0a70a04..54816d75b578 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -75,9 +75,9 @@
  */
 
 /* If a device driver keeps reading an MMIO register in an interrupt
- * handler after a slot isolation event has occurred, we assume it
- * is broken and panic.  This sets the threshold for how many read
- * attempts we allow before panicking.
+ * handler after a slot isolation event, it might be broken.
+ * This sets the threshold for how many read attempts we allow
+ * before printing an error message.
  */
 #define EEH_MAX_FAILS   2100000
 
@@ -470,6 +470,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
         unsigned long flags;
         struct pci_dn *pdn;
         int rc = 0;
+        const char *location;
 
         total_mmio_ffs++;
 
@@ -509,18 +510,15 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
         rc = 1;
         if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
                 pdn->eeh_check_count ++;
-                if (pdn->eeh_check_count >= EEH_MAX_FAILS) {
-                        printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
-                                pdn->eeh_check_count);
+                if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) {
+                        location = of_get_property(dn, "ibm,loc-code", NULL);
+                        printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
+                                "location=%s driver=%s pci addr=%s\n",
+                                pdn->eeh_check_count, location,
+                                dev->driver->name, pci_name(dev));
+                        printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+                                dev->driver->name);
                         dump_stack();
-                        msleep(5000);
-                        
-                        /* re-read the slot reset state */
-                        if (read_slot_reset_state(pdn, rets) != 0)
-                                rets[0] = -1;   /* reset state unknown */
-
-                        /* If we are here, then we hit an infinite loop. Stop. */
-                        panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev));
                 }
                 goto dn_unlock;
         }
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 9a12908510fb..a8c446697f9e 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -48,9 +48,10 @@
 #include "plpar_wrappers.h"
 
 
-static void tce_build_pSeries(struct iommu_table *tbl, long index,
+static int tce_build_pSeries(struct iommu_table *tbl, long index,
                               long npages, unsigned long uaddr,
-                              enum dma_data_direction direction)
+                              enum dma_data_direction direction,
+                              struct dma_attrs *attrs)
 {
         u64 proto_tce;
         u64 *tcep;
@@ -71,6 +72,7 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index,
                 uaddr += TCE_PAGE_SIZE;
                 tcep++;
         }
+        return 0;
 }
 
 
@@ -93,13 +95,19 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
         return *tcep;
 }
 
-static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static void tce_free_pSeriesLP(struct iommu_table*, long, long);
+static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
+
+static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
                                 long npages, unsigned long uaddr,
-                                enum dma_data_direction direction)
+                                enum dma_data_direction direction,
+                                struct dma_attrs *attrs)
 {
-        u64 rc;
+        u64 rc = 0;
         u64 proto_tce, tce;
         u64 rpn;
+        int ret = 0;
+        long tcenum_start = tcenum, npages_start = npages;
 
         rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
         proto_tce = TCE_PCI_READ;
@@ -110,6 +118,13 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
                 tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
                 rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
 
+                if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+                        ret = (int)rc;
+                        tce_free_pSeriesLP(tbl, tcenum_start,
+                                           (npages_start - (npages + 1)));
+                        break;
+                }
+
                 if (rc && printk_ratelimit()) {
                         printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
                         printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -121,23 +136,27 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
                 tcenum++;
                 rpn++;
         }
+        return ret;
 }
 
 static DEFINE_PER_CPU(u64 *, tce_page) = NULL;
 
-static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
                                      long npages, unsigned long uaddr,
-                                     enum dma_data_direction direction)
+                                     enum dma_data_direction direction,
+                                     struct dma_attrs *attrs)
 {
-        u64 rc;
+        u64 rc = 0;
         u64 proto_tce;
         u64 *tcep;
         u64 rpn;
         long l, limit;
+        long tcenum_start = tcenum, npages_start = npages;
+        int ret = 0;
 
         if (npages == 1) {
-                tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, direction);
-                return;
+                return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+                                           direction, attrs);
         }
 
         tcep = __get_cpu_var(tce_page);
@@ -149,9 +168,8 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
                 tcep = (u64 *)__get_free_page(GFP_ATOMIC);
                 /* If allocation fails, fall back to the loop implementation */
                 if (!tcep) {
-                        tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
-                                            direction);
-                        return;
+                        return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+                                            direction, attrs);
                 }
                 __get_cpu_var(tce_page) = tcep;
         }
@@ -183,6 +201,13 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
                 tcenum += limit;
         } while (npages > 0 && !rc);
 
+        if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+                ret = (int)rc;
+                tce_freemulti_pSeriesLP(tbl, tcenum_start,
+                                        (npages_start - (npages + limit)));
+                return ret;
+        }
+
         if (rc && printk_ratelimit()) {
                 printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
                 printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -190,6 +215,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
                 printk("\ttce[0] val = 0x%lx\n", tcep[0]);
                 show_stack(current, (unsigned long *)__get_SP());
         }
+        return ret;
 }
 
 static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index d8680b589dc9..a437267c6bf8 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -42,6 +42,16 @@ static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa)
         return vpa_call(0x3, cpu, vpa);
 }
 
+static inline long plpar_page_set_loaned(unsigned long vpa)
+{
+        return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa, 0);
+}
+
+static inline long plpar_page_set_active(unsigned long vpa)
+{
+        return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa, 0);
+}
+
 extern void vpa_init(int cpu);
 
 static inline long plpar_pte_enter(unsigned long flags,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 90beb444e1dd..063a0d2fba30 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -314,6 +314,76 @@ static int pseries_set_xdabr(unsigned long dabr)
                         H_DABRX_KERNEL | H_DABRX_USER);
 }
 
+#define CMO_CHARACTERISTICS_TOKEN 44
+#define CMO_MAXLENGTH 1026
+
+/**
+ * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
+ * handle that here. (Stolen from parse_system_parameter_string)
+ */
+void pSeries_cmo_feature_init(void)
+{
+        char *ptr, *key, *value, *end;
+        int call_status;
+        int PrPSP = -1;
+        int SecPSP = -1;
+
+        pr_debug(" -> fw_cmo_feature_init()\n");
+        spin_lock(&rtas_data_buf_lock);
+        memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
+        call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+                                NULL,
+                                CMO_CHARACTERISTICS_TOKEN,
+                                __pa(rtas_data_buf),
+                                RTAS_DATA_BUF_SIZE);
+
+        if (call_status != 0) {
+                spin_unlock(&rtas_data_buf_lock);
+                pr_debug("CMO not available\n");
+                pr_debug(" <- fw_cmo_feature_init()\n");
+                return;
+        }
+
+        end = rtas_data_buf + CMO_MAXLENGTH - 2;
+        ptr = rtas_data_buf + 2;        /* step over strlen value */
+        key = value = ptr;
+
+        while (*ptr && (ptr <= end)) {
+                /* Separate the key and value by replacing '=' with '\0' and
+                 * point the value at the string after the '='
+                 */
+                if (ptr[0] == '=') {
+                        ptr[0] = '\0';
+                        value = ptr + 1;
+                } else if (ptr[0] == '\0' || ptr[0] == ',') {
+                        /* Terminate the string containing the key/value pair */
+                        ptr[0] = '\0';
+
+                        if (key == value) {
+                                pr_debug("Malformed key/value pair\n");
+                                /* Never found a '=', end processing */
+                                break;
+                        }
+
+                        if (0 == strcmp(key, "PrPSP"))
+                                PrPSP = simple_strtol(value, NULL, 10);
+                        else if (0 == strcmp(key, "SecPSP"))
+                                SecPSP = simple_strtol(value, NULL, 10);
+                        value = key = ptr + 1;
+                }
+                ptr++;
+        }
+
+        if (PrPSP != -1 || SecPSP != -1) {
+                pr_info("CMO enabled\n");
+                pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+                powerpc_firmware_features |= FW_FEATURE_CMO;
+        } else
+                pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+        spin_unlock(&rtas_data_buf_lock);
+        pr_debug(" <- fw_cmo_feature_init()\n");
+}
+
 /*
  * Early initialization.  Relocation is on but do not reference unbolted pages
  */
@@ -329,6 +399,7 @@ static void __init pSeries_init_early(void)
         else if (firmware_has_feature(FW_FEATURE_XDABR))
                 ppc_md.set_dabr = pseries_set_xdabr;
 
+        pSeries_cmo_feature_init();
         iommu_init_early_pSeries();
 
         pr_debug(" <- pSeries_init_early()\n");
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 7f59188cd9a1..9e105cbc5e5f 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -57,6 +57,8 @@
 #define AXON_RAM_SECTOR_SIZE            1 << AXON_RAM_SECTOR_SHIFT
 #define AXON_RAM_IRQ_FLAGS              IRQF_SHARED | IRQF_TRIGGER_RISING
 
+static int azfs_major, azfs_minor;
+
 struct axon_ram_bank {
         struct of_device        *device;
         struct gendisk          *disk;
@@ -148,7 +150,10 @@ axon_ram_direct_access(struct block_device *device, sector_t sector,
         struct axon_ram_bank *bank = device->bd_disk->private_data;
         loff_t offset;
 
-        offset = sector << AXON_RAM_SECTOR_SHIFT;
+        offset = sector;
+        if (device->bd_part != NULL)
+                offset += device->bd_part->start_sect;
+        offset <<= AXON_RAM_SECTOR_SHIFT;
         if (offset >= bank->size) {
                 dev_err(&bank->device->dev, "Access outside of address space\n");
                 return -ERANGE;
@@ -227,19 +232,14 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
                 goto failed;
         }
 
-        bank->disk->first_minor = 0;
+        bank->disk->major = azfs_major;
+        bank->disk->first_minor = azfs_minor;
         bank->disk->fops = &axon_ram_devops;
         bank->disk->private_data = bank;
         bank->disk->driverfs_dev = &device->dev;
 
         sprintf(bank->disk->disk_name, "%s%d",
                         AXON_RAM_DEVICE_NAME, axon_ram_bank_id);
-        bank->disk->major = register_blkdev(0, bank->disk->disk_name);
-        if (bank->disk->major < 0) {
-                dev_err(&device->dev, "Cannot register block device\n");
-                rc = -EFAULT;
-                goto failed;
-        }
 
         bank->disk->queue = blk_alloc_queue(GFP_KERNEL);
         if (bank->disk->queue == NULL) {
@@ -276,6 +276,8 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
                 goto failed;
         }
 
+        azfs_minor += bank->disk->minors;
+
         return 0;
 
 failed:
@@ -310,7 +312,6 @@ axon_ram_remove(struct of_device *device)
 
         device_remove_file(&device->dev, &dev_attr_ecc);
         free_irq(bank->irq_id, device);
-        unregister_blkdev(bank->disk->major, bank->disk->disk_name);
         del_gendisk(bank->disk);
         iounmap((void __iomem *) bank->io_addr);
         kfree(bank);
@@ -341,6 +342,14 @@ static struct of_platform_driver axon_ram_driver = {
 static int __init
 axon_ram_init(void)
 {
+        azfs_major = register_blkdev(azfs_major, AXON_RAM_DEVICE_NAME);
+        if (azfs_major < 0) {
+                printk(KERN_ERR "%s cannot become block device major number\n",
+                                AXON_RAM_MODULE_NAME);
+                return -EFAULT;
+        }
+        azfs_minor = 0;
+
         return of_register_platform_driver(&axon_ram_driver);
 }
 
@@ -351,6 +360,7 @@ static void __exit
 axon_ram_exit(void)
 {
         of_unregister_platform_driver(&axon_ram_driver);
+        unregister_blkdev(azfs_major, AXON_RAM_DEVICE_NAME);
 }
 
 module_init(axon_ram_init);
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 005c2ecf976f..89639ecbf381 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -147,9 +147,10 @@ static void dart_flush(struct iommu_table *tbl)
         }
 }
 
-static void dart_build(struct iommu_table *tbl, long index,
+static int dart_build(struct iommu_table *tbl, long index,
                        long npages, unsigned long uaddr,
-                       enum dma_data_direction direction)
+                       enum dma_data_direction direction,
+                       struct dma_attrs *attrs)
 {
         unsigned int *dp;
         unsigned int rpn;
@@ -183,6 +184,7 @@ static void dart_build(struct iommu_table *tbl, long index,
         } else {
                 dart_dirty = 1;
         }
+        return 0;
 }
 
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 87b0aa13ab48..61e6d77efa4f 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -27,6 +27,7 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
 /* atmu setup for fsl pci/pcie controller */
 void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
 {
@@ -248,3 +249,63 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
+
+#if defined(CONFIG_PPC_83xx)
+int __init mpc83xx_add_bridge(struct device_node *dev)
+{
+        int len;
+        struct pci_controller *hose;
+        struct resource rsrc;
+        const int *bus_range;
+        int primary = 1, has_address = 0;
+        phys_addr_t immr = get_immrbase();
+
+        pr_debug("Adding PCI host bridge %s\n", dev->full_name);
+
+        /* Fetch host bridge registers address */
+        has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+        /* Get bus range if any */
+        bus_range = of_get_property(dev, "bus-range", &len);
+        if (bus_range == NULL || len < 2 * sizeof(int)) {
+                printk(KERN_WARNING "Can't get bus-range for %s, assume"
+                       " bus 0\n", dev->full_name);
+        }
+
+        ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
+        hose = pcibios_alloc_controller(dev);
+        if (!hose)
+                return -ENOMEM;
+
+        hose->first_busno = bus_range ? bus_range[0] : 0;
+        hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+        /* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
+         * the other at 0x8600, we consider the 0x8500 the primary controller
+         */
+        /* PCI 1 */
+        if ((rsrc.start & 0xfffff) == 0x8500) {
+                setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
+        }
+        /* PCI 2 */
+        if ((rsrc.start & 0xfffff) == 0x8600) {
+                setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
+                primary = 0;
+        }
+
+        printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
+               "Firmware bus number: %d->%d\n",
+               (unsigned long long)rsrc.start, hose->first_busno,
+               hose->last_busno);
+
+        pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+            hose, hose->cfg_addr, hose->cfg_data);
+
+        /* Interpret the "ranges" property */
+        /* This also maps the I/O region and sets isa_io/mem_base */
+        pci_process_bridge_OF_ranges(hose, dev, primary);
+
+        return 0;
+}
+#endif /* CONFIG_PPC_83xx */
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index 37b04ad26571..13f30c2a61e7 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -83,6 +83,7 @@ struct ccsr_pci {
 
 extern int fsl_add_bridge(struct device_node *dev, int is_primary);
 extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
+extern int mpc83xx_add_bridge(struct device_node *dev);
 
 #endif /* __POWERPC_FSL_PCI_H */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index ebcec7362f95..214388e11807 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -207,66 +207,58 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-static int __init gfar_mdio_of_init(void)
+static int gfar_mdio_of_init_one(struct device_node *np)
 {
-        struct device_node *np = NULL;
+        int k;
+        struct device_node *child = NULL;
+        struct gianfar_mdio_data mdio_data;
         struct platform_device *mdio_dev;
         struct resource res;
         int ret;
 
-        np = of_find_compatible_node(np, NULL, "fsl,gianfar-mdio");
+        memset(&res, 0, sizeof(res));
+        memset(&mdio_data, 0, sizeof(mdio_data));
 
-        /* try the deprecated version */
-        if (!np)
-                np = of_find_compatible_node(np, "mdio", "gianfar");
+        ret = of_address_to_resource(np, 0, &res);
+        if (ret)
+                return ret;
 
-        if (np) {
-                int k;
-                struct device_node *child = NULL;
-                struct gianfar_mdio_data mdio_data;
+        mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
+                        res.start&0xfffff, &res, 1);
+        if (IS_ERR(mdio_dev))
+                return PTR_ERR(mdio_dev);
 
-                memset(&res, 0, sizeof(res));
-                memset(&mdio_data, 0, sizeof(mdio_data));
+        for (k = 0; k < 32; k++)
+                mdio_data.irq[k] = PHY_POLL;
 
-                ret = of_address_to_resource(np, 0, &res);
-                if (ret)
-                        goto err;
-
-                mdio_dev =
-                    platform_device_register_simple("fsl-gianfar_mdio",
-                                                    res.start, &res, 1);
-                if (IS_ERR(mdio_dev)) {
-                        ret = PTR_ERR(mdio_dev);
-                        goto err;
+        while ((child = of_get_next_child(np, child)) != NULL) {
+                int irq = irq_of_parse_and_map(child, 0);
+                if (irq != NO_IRQ) {
+                        const u32 *id = of_get_property(child, "reg", NULL);
+                        mdio_data.irq[*id] = irq;
                 }
+        }
 
-                for (k = 0; k < 32; k++)
-                        mdio_data.irq[k] = PHY_POLL;
+        ret = platform_device_add_data(mdio_dev, &mdio_data,
+                                sizeof(struct gianfar_mdio_data));
+        if (ret)
+                platform_device_unregister(mdio_dev);
 
-                while ((child = of_get_next_child(np, child)) != NULL) {
-                        int irq = irq_of_parse_and_map(child, 0);
-                        if (irq != NO_IRQ) {
-                                const u32 *id = of_get_property(child,
-                                                        "reg", NULL);
-                                mdio_data.irq[*id] = irq;
-                        }
-                }
+        return ret;
+}
 
-                ret =
-                    platform_device_add_data(mdio_dev, &mdio_data,
-                                             sizeof(struct gianfar_mdio_data));
-                if (ret)
-                        goto unreg;
-        }
+static int __init gfar_mdio_of_init(void)
+{
+        struct device_node *np = NULL;
 
-        of_node_put(np);
-        return 0;
+        for_each_compatible_node(np, NULL, "fsl,gianfar-mdio")
+                gfar_mdio_of_init_one(np);
 
-unreg:
-        platform_device_unregister(mdio_dev);
-err:
-        of_node_put(np);
-        return ret;
+        /* try the deprecated version */
+        for_each_compatible_node(np, "mdio", "gianfar");
+                gfar_mdio_of_init_one(np);
+
+        return 0;
 }
 
 arch_initcall(gfar_mdio_of_init);
@@ -296,6 +288,9 @@ static int __init gfar_of_init(void)
                 const phandle *ph;
                 int n_res = 2;
 
+                if (!of_device_is_available(np))
+                        continue;
+
                 memset(r, 0, sizeof(r));
                 memset(&gfar_data, 0, sizeof(gfar_data));
 
@@ -357,6 +352,9 @@ static int __init gfar_of_init(void)
                 else
                         gfar_data.interface = PHY_INTERFACE_MODE_MII;
 
+                if (of_get_property(np, "fsl,magic-packet", NULL))
+                        gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
+
                 ph = of_get_property(np, "phy-handle", NULL);
                 if (ph == NULL) {
                         u32 *fixed_link;
@@ -390,7 +388,7 @@ static int __init gfar_of_init(void)
 
                         gfar_data.phy_id = *id;
                         snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
-                                 (unsigned long long)res.start);
+                                 (unsigned long long)res.start&0xfffff);
 
                         of_node_put(phy);
                         of_node_put(mdio);
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 52c831fa1886..024299887352 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -10,6 +10,7 @@ extern u32 get_baudrate(void);
 extern u32 fsl_get_sys_freq(void);
 
 struct spi_board_info;
+struct device_node;
 
 extern int fsl_spi_init(struct spi_board_info *board_infos,
                         unsigned int num_board_infos,
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index caba1c0be5a7..88a983ece5c9 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
+#include <linux/fsl_devices.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -889,8 +890,78 @@ unsigned int ipic_get_irq(void)
         return irq_linear_revmap(primary_ipic->irqhost, irq);
 }
 
+#ifdef CONFIG_PM
+static struct {
+        u32 sicfr;
+        u32 siprr[2];
+        u32 simsr[2];
+        u32 sicnr;
+        u32 smprr[2];
+        u32 semsr;
+        u32 secnr;
+        u32 sermr;
+        u32 sercr;
+} ipic_saved_state;
+
+static int ipic_suspend(struct sys_device *sdev, pm_message_t state)
+{
+        struct ipic *ipic = primary_ipic;
+
+        ipic_saved_state.sicfr = ipic_read(ipic->regs, IPIC_SICFR);
+        ipic_saved_state.siprr[0] = ipic_read(ipic->regs, IPIC_SIPRR_A);
+        ipic_saved_state.siprr[1] = ipic_read(ipic->regs, IPIC_SIPRR_D);
+        ipic_saved_state.simsr[0] = ipic_read(ipic->regs, IPIC_SIMSR_H);
+        ipic_saved_state.simsr[1] = ipic_read(ipic->regs, IPIC_SIMSR_L);
+        ipic_saved_state.sicnr = ipic_read(ipic->regs, IPIC_SICNR);
+        ipic_saved_state.smprr[0] = ipic_read(ipic->regs, IPIC_SMPRR_A);
+        ipic_saved_state.smprr[1] = ipic_read(ipic->regs, IPIC_SMPRR_B);
+        ipic_saved_state.semsr = ipic_read(ipic->regs, IPIC_SEMSR);
+        ipic_saved_state.secnr = ipic_read(ipic->regs, IPIC_SECNR);
+        ipic_saved_state.sermr = ipic_read(ipic->regs, IPIC_SERMR);
+        ipic_saved_state.sercr = ipic_read(ipic->regs, IPIC_SERCR);
+
+        if (fsl_deep_sleep()) {
+                /* In deep sleep, make sure there can be no
+                 * pending interrupts, as this can cause
+                 * problems on 831x.
+                 */
+                ipic_write(ipic->regs, IPIC_SIMSR_H, 0);
+                ipic_write(ipic->regs, IPIC_SIMSR_L, 0);
+                ipic_write(ipic->regs, IPIC_SEMSR, 0);
+                ipic_write(ipic->regs, IPIC_SERMR, 0);
+        }
+
+        return 0;
+}
+
+static int ipic_resume(struct sys_device *sdev)
+{
+        struct ipic *ipic = primary_ipic;
+
+        ipic_write(ipic->regs, IPIC_SICFR, ipic_saved_state.sicfr);
+        ipic_write(ipic->regs, IPIC_SIPRR_A, ipic_saved_state.siprr[0]);
+        ipic_write(ipic->regs, IPIC_SIPRR_D, ipic_saved_state.siprr[1]);
+        ipic_write(ipic->regs, IPIC_SIMSR_H, ipic_saved_state.simsr[0]);
+        ipic_write(ipic->regs, IPIC_SIMSR_L, ipic_saved_state.simsr[1]);
+        ipic_write(ipic->regs, IPIC_SICNR, ipic_saved_state.sicnr);
+        ipic_write(ipic->regs, IPIC_SMPRR_A, ipic_saved_state.smprr[0]);
+        ipic_write(ipic->regs, IPIC_SMPRR_B, ipic_saved_state.smprr[1]);
+        ipic_write(ipic->regs, IPIC_SEMSR, ipic_saved_state.semsr);
+        ipic_write(ipic->regs, IPIC_SECNR, ipic_saved_state.secnr);
+        ipic_write(ipic->regs, IPIC_SERMR, ipic_saved_state.sermr);
+        ipic_write(ipic->regs, IPIC_SERCR, ipic_saved_state.sercr);
+
+        return 0;
+}
+#else
+#define ipic_suspend NULL
+#define ipic_resume NULL
+#endif
+
 static struct sysdev_class ipic_sysclass = {
         .name = "ipic",
+        .suspend = ipic_suspend,
+        .resume = ipic_resume,
 };
 
 static struct sys_device device_ipic = {
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 4bb18f57901e..1ce546462be5 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -29,7 +29,7 @@ config QE_GPIO
         bool "QE GPIO support"
         depends on QUICC_ENGINE
         select GENERIC_GPIO
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         help
           Say Y here if you're going to use hardware that connects to the
           QE GPIOs.
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 9e82d7e725a5..b3b73ae57d6d 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -64,7 +64,7 @@ static phys_addr_t qebase = -1;
 phys_addr_t get_qe_base(void)
 {
         struct device_node *qe;
-        unsigned int size;
+        int size;
         const u32 *prop;
 
         if (qebase != -1)
@@ -158,7 +158,7 @@ static unsigned int brg_clk = 0;
 unsigned int qe_get_brg_clk(void)
 {
         struct device_node *qe;
-        unsigned int size;
+        int size;
         const u32 *prop;
 
         if (brg_clk)
@@ -305,7 +305,7 @@ EXPORT_SYMBOL(qe_put_snum);
 
 static int qe_sdma_init(void)
 {
-        struct sdma *sdma = &qe_immr->sdma;
+        struct sdma __iomem *sdma = &qe_immr->sdma;
         unsigned long sdma_buf_offset;
 
         if (!sdma)
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index d3c7f5af9bc8..1d78071aad7d 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -88,7 +88,7 @@ int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
         return 0;
 }
 
-static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
         unsigned int *reg_num, unsigned int *shift)
 {
         unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
@@ -100,7 +100,7 @@ static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
 
 int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 {
-        __be32 *cmxucr;
+        __be32 __iomem *cmxucr;
         unsigned int reg_num;
         unsigned int shift;
 
@@ -121,7 +121,7 @@ int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
         enum comm_dir mode)
 {
-        __be32 *cmxucr;
+        __be32 __iomem *cmxucr;
         unsigned int reg_num;
         unsigned int shift;
         u32 clock_bits = 0;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index bcf88e6ce962..1aecb075a72e 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -46,7 +46,7 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
         printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
                   &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
         printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
-                  &uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+                  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
         printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
                   &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
         printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
@@ -68,7 +68,7 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
         printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
                   &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
         printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
-                  &uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+                  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
 }
 EXPORT_SYMBOL(ucc_fast_dump_regs);
 
@@ -96,7 +96,7 @@ EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
 
 void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
 {
-        struct ucc_fast *uf_regs;
+        struct ucc_fast __iomem *uf_regs;
         u32 gumr;
 
         uf_regs = uccf->uf_regs;
@@ -117,7 +117,7 @@ EXPORT_SYMBOL(ucc_fast_enable);
 
 void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
 {
-        struct ucc_fast *uf_regs;
+        struct ucc_fast __iomem *uf_regs;
         u32 gumr;
 
         uf_regs = uccf->uf_regs;
@@ -139,7 +139,7 @@ EXPORT_SYMBOL(ucc_fast_disable);
 int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
 {
         struct ucc_fast_private *uccf;
-        struct ucc_fast *uf_regs;
+        struct ucc_fast __iomem *uf_regs;
         u32 gumr;
         int ret;
 
@@ -216,10 +216,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
         uccf->stopped_tx = 0;
         uccf->stopped_rx = 0;
         uf_regs = uccf->uf_regs;
-        uccf->p_ucce = (u32 *) & (uf_regs->ucce);
-        uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+        uccf->p_ucce = &uf_regs->ucce;
+        uccf->p_uccm = &uf_regs->uccm;
 #ifdef CONFIG_UGETH_TX_ON_DEMAND
-        uccf->p_utodr = (u16 *) & (uf_regs->utodr);
+        uccf->p_utodr = &uf_regs->utodr;
 #endif
 #ifdef STATISTICS
         uccf->tx_frames = 0;
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index eb530b4128ba..2ed88122be93 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -565,6 +565,7 @@ bool "s390 guest support (EXPERIMENTAL)"
         depends on 64BIT && EXPERIMENTAL
         select VIRTIO
         select VIRTIO_RING
+        select VIRTIO_CONSOLE
         help
           Select this option if you want to run the kernel under s390 linux
 endmenu
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 288ad490a6dd..569079ec4ff0 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -197,7 +197,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
         args.new = BREAKPOINT_INSTRUCTION;
 
         kcb->kprobe_status = KPROBE_SWAP_INST;
-        stop_machine_run(swap_instruction, &args, NR_CPUS);
+        stop_machine(swap_instruction, &args, NULL);
         kcb->kprobe_status = status;
 }
 
@@ -212,7 +212,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
         args.new = p->opcode;
 
         kcb->kprobe_status = KPROBE_SWAP_INST;
-        stop_machine_run(swap_instruction, &args, NR_CPUS);
+        stop_machine(swap_instruction, &args, NULL);
         kcb->kprobe_status = status;
 }
 
@@ -270,7 +270,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
         __ctl_store(kcb->kprobe_saved_ctl, 9, 11);
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
                                         struct pt_regs *regs)
 {
@@ -332,7 +331,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
                  * No kprobe at this address. The fault has not been
                  * caused by a kprobe breakpoint. The race of breakpoint
                  * vs. kprobe remove does not exist because on s390 we
-                 * use stop_machine_run to arm/disarm the breakpoints.
+                 * use stop_machine to arm/disarm the breakpoints.
                  */
                 goto no_kprobe;
 
@@ -377,8 +376,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
         unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
         INIT_HLIST_HEAD(&empty_rp);
-        spin_lock_irqsave(&kretprobe_lock, flags);
-        head = kretprobe_inst_table_head(current);
+        kretprobe_hash_lock(current, &head, &flags);
 
         /*
          * It is possible to have multiple instances associated with a given
@@ -417,7 +415,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
         regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
 
         reset_current_kprobe();
-        spin_unlock_irqrestore(&kretprobe_lock, flags);
+        kretprobe_hash_unlock(current, &flags);
         preempt_enable_no_resched();
 
         hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 85defd01d293..9839767d0842 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -142,7 +142,7 @@ static void default_idle(void)
 void cpu_idle(void)
 {
         for (;;) {
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 while (!need_resched())
                         default_idle();
                 tick_nohz_restart_sched_tick();
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index b358e18273b0..62122bad1e33 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -54,6 +54,7 @@
 #include <asm/sections.h>
 #include <asm/ebcdic.h>
 #include <asm/compat.h>
+#include <asm/kvm_virtio.h>
 
 long psw_kernel_bits    = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY |
                            PSW_MASK_MCHECK | PSW_DEFAULT_KEY);
@@ -766,7 +767,8 @@ setup_arch(char **cmdline_p)
                 printk("We are running under VM (64 bit mode)\n");
         else if (MACHINE_IS_KVM) {
                 printk("We are running under KVM (64 bit mode)\n");
-                add_preferred_console("ttyS", 1, NULL);
+                add_preferred_console("hvc", 0, NULL);
+                s390_virtio_console_init();
         } else
                 printk("We are running native (64 bit mode)\n");
 #endif /* CONFIG_64BIT */
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index b6781030cfbd..b795b3e24afd 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -864,7 +864,8 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static ssize_t cpu_configure_show(struct sys_device *dev, char *buf)
+static ssize_t cpu_configure_show(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         ssize_t count;
 
@@ -874,8 +875,9 @@ static ssize_t cpu_configure_show(struct sys_device *dev, char *buf)
         return count;
 }
 
-static ssize_t cpu_configure_store(struct sys_device *dev, const char *buf,
-                                   size_t count)
+static ssize_t cpu_configure_store(struct sys_device *dev,
+                                  struct sysdev_attribute *attr,
+                                  const char *buf, size_t count)
 {
         int cpu = dev->id;
         int val, rc;
@@ -922,7 +924,8 @@ out:
 static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
+static ssize_t cpu_polarization_show(struct sys_device *dev,
+                                     struct sysdev_attribute *attr, char *buf)
 {
         int cpu = dev->id;
         ssize_t count;
@@ -950,7 +953,8 @@ static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(polarization, 0444, cpu_polarization_show, NULL);
 
-static ssize_t show_cpu_address(struct sys_device *dev, char *buf)
+static ssize_t show_cpu_address(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]);
 }
@@ -970,7 +974,8 @@ static struct attribute_group cpu_common_attr_group = {
         .attrs = cpu_common_attrs,
 };
 
-static ssize_t show_capability(struct sys_device *dev, char *buf)
+static ssize_t show_capability(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         unsigned int capability;
         int rc;
@@ -982,7 +987,8 @@ static ssize_t show_capability(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(capability, 0444, show_capability, NULL);
 
-static ssize_t show_idle_count(struct sys_device *dev, char *buf)
+static ssize_t show_idle_count(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         struct s390_idle_data *idle;
         unsigned long long idle_count;
@@ -995,7 +1001,8 @@ static ssize_t show_idle_count(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(idle_count, 0444, show_idle_count, NULL);
 
-static ssize_t show_idle_time(struct sys_device *dev, char *buf)
+static ssize_t show_idle_time(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         struct s390_idle_data *idle;
         unsigned long long new_time;
@@ -1112,7 +1119,9 @@ out:
         return rc;
 }
 
-static ssize_t __ref rescan_store(struct sys_device *dev, const char *buf,
+static ssize_t __ref rescan_store(struct sys_device *dev,
+                                  struct sysdev_attribute *attr,
+                                  const char *buf,
                                   size_t count)
 {
         int rc;
@@ -1123,7 +1132,9 @@ static ssize_t __ref rescan_store(struct sys_device *dev, const char *buf,
 static SYSDEV_ATTR(rescan, 0200, NULL, rescan_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t dispatching_show(struct sys_device *dev, char *buf)
+static ssize_t dispatching_show(struct sys_device *dev,
+                                struct sysdev_attribute *attr,
+                                char *buf)
 {
         ssize_t count;
 
@@ -1133,8 +1144,9 @@ static ssize_t dispatching_show(struct sys_device *dev, char *buf)
         return count;
 }
 
-static ssize_t dispatching_store(struct sys_device *dev, const char *buf,
-                                 size_t count)
+static ssize_t dispatching_store(struct sys_device *dev,
+                                 struct sysdev_attribute *attr,
+                                 const char *buf, size_t count)
 {
         int val, rc;
         char delim;
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index f2cede3947b2..ab70d9bd9261 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -1100,7 +1100,9 @@ static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev)
                 return etr_port1_online ? &etr_port1 : NULL;
 }
 
-static ssize_t etr_online_show(struct sys_device *dev, char *buf)
+static ssize_t etr_online_show(struct sys_device *dev,
+                                struct sysdev_attribute *attr,
+                                char *buf)
 {
         unsigned int online;
 
@@ -1109,7 +1111,8 @@ static ssize_t etr_online_show(struct sys_device *dev, char *buf)
 }
 
 static ssize_t etr_online_store(struct sys_device *dev,
-                              const char *buf, size_t count)
+                                struct sysdev_attribute *attr,
+                                const char *buf, size_t count)
 {
         unsigned int value;
 
@@ -1136,7 +1139,9 @@ static ssize_t etr_online_store(struct sys_device *dev,
 
 static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store);
 
-static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
+static ssize_t etr_stepping_control_show(struct sys_device *dev,
+                                        struct sysdev_attribute *attr,
+                                        char *buf)
 {
         return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ?
                        etr_eacr.e0 : etr_eacr.e1);
@@ -1144,7 +1149,8 @@ static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
 
-static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
+static ssize_t etr_mode_code_show(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         if (!etr_port0_online && !etr_port1_online)
                 /* Status word is not uptodate if both ports are offline. */
@@ -1155,7 +1161,8 @@ static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL);
 
-static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
+static ssize_t etr_untuned_show(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1166,7 +1173,8 @@ static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL);
 
-static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_network_id_show(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1177,7 +1185,8 @@ static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL);
 
-static ssize_t etr_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_id_show(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1188,7 +1197,8 @@ static ssize_t etr_id_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(id, 0400, etr_id_show, NULL);
 
-static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
+static ssize_t etr_port_number_show(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1199,7 +1209,8 @@ static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL);
 
-static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
+static ssize_t etr_coupled_show(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1210,7 +1221,8 @@ static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL);
 
-static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
+static ssize_t etr_local_time_show(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1221,7 +1233,8 @@ static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL);
 
-static ssize_t etr_utc_offset_show(struct sys_device *dev, char *buf)
+static ssize_t etr_utc_offset_show(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         struct etr_aib *aib = etr_aib_from_dev(dev);
 
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 212d618b0095..632b13e10053 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -9,7 +9,6 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/sched.h>
-#include <linux/kthread.h>
 #include <linux/workqueue.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
@@ -230,20 +229,9 @@ void arch_update_cpu_topology(void)
         }
 }
 
-static int topology_kthread(void *data)
-{
-        arch_reinit_sched_domains();
-        return 0;
-}
-
 static void topology_work_fn(struct work_struct *work)
 {
-        /* We can't call arch_reinit_sched_domains() from a multi-threaded
-         * workqueue context since it may deadlock in case of cpu hotplug.
-         * So we have to create a kernel thread in order to call
-         * arch_reinit_sched_domains().
-         */
-        kthread_run(topology_kthread, NULL, "topology_update");
+        arch_reinit_sched_domains();
 }
 
 void topology_schedule_update(void)
diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h
index 4e0633c413f3..ed60f3a74a85 100644
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -18,11 +18,11 @@
 #include <asm/uaccess.h>
 
 static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
-                                               u64 guestaddr)
+                                               unsigned long guestaddr)
 {
-        u64 prefix  = vcpu->arch.sie_block->prefix;
-        u64 origin  = vcpu->kvm->arch.guest_origin;
-        u64 memsize = vcpu->kvm->arch.guest_memsize;
+        unsigned long prefix  = vcpu->arch.sie_block->prefix;
+        unsigned long origin  = vcpu->kvm->arch.guest_origin;
+        unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
         if (guestaddr < 2 * PAGE_SIZE)
                 guestaddr += prefix;
@@ -37,7 +37,7 @@ static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
         return (void __user *) guestaddr;
 }
 
-static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr,
                                 u64 *result)
 {
         void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -47,10 +47,10 @@ static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
         if (IS_ERR((void __force *) uptr))
                 return PTR_ERR((void __force *) uptr);
 
-        return get_user(*result, (u64 __user *) uptr);
+        return get_user(*result, (unsigned long __user *) uptr);
 }
 
-static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr,
                                 u32 *result)
 {
         void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -63,7 +63,7 @@ static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
         return get_user(*result, (u32 __user *) uptr);
 }
 
-static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr,
                                 u16 *result)
 {
         void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -76,7 +76,7 @@ static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
         return get_user(*result, (u16 __user *) uptr);
 }
 
-static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr,
                                u8 *result)
 {
         void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -87,7 +87,7 @@ static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
         return get_user(*result, (u8 __user *) uptr);
 }
 
-static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr,
                                 u64 value)
 {
         void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -100,7 +100,7 @@ static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
         return put_user(value, (u64 __user *) uptr);
 }
 
-static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr,
                                 u32 value)
 {
         void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -113,7 +113,7 @@ static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
         return put_user(value, (u32 __user *) uptr);
 }
 
-static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr,
                                 u16 value)
 {
         void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -126,7 +126,7 @@ static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
         return put_user(value, (u16 __user *) uptr);
 }
 
-static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr,
                                u8 value)
 {
         void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -138,7 +138,8 @@ static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
 }
 
 
-static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu,
+                                       unsigned long guestdest,
                                        const void *from, unsigned long n)
 {
         int rc;
@@ -153,12 +154,12 @@ static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest,
         return 0;
 }
 
-static inline int copy_to_guest(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int copy_to_guest(struct kvm_vcpu *vcpu, unsigned long guestdest,
                                 const void *from, unsigned long n)
 {
-        u64 prefix  = vcpu->arch.sie_block->prefix;
-        u64 origin  = vcpu->kvm->arch.guest_origin;
-        u64 memsize = vcpu->kvm->arch.guest_memsize;
+        unsigned long prefix  = vcpu->arch.sie_block->prefix;
+        unsigned long origin  = vcpu->kvm->arch.guest_origin;
+        unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
         if ((guestdest < 2 * PAGE_SIZE) && (guestdest + n > 2 * PAGE_SIZE))
                 goto slowpath;
@@ -189,7 +190,8 @@ slowpath:
 }
 
 static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to,
-                                         u64 guestsrc, unsigned long n)
+                                         unsigned long guestsrc,
+                                         unsigned long n)
 {
         int rc;
         unsigned long i;
@@ -204,11 +206,11 @@ static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to,
 }
 
 static inline int copy_from_guest(struct kvm_vcpu *vcpu, void *to,
-                                  u64 guestsrc, unsigned long n)
+                                  unsigned long guestsrc, unsigned long n)
 {
-        u64 prefix  = vcpu->arch.sie_block->prefix;
-        u64 origin  = vcpu->kvm->arch.guest_origin;
-        u64 memsize = vcpu->kvm->arch.guest_memsize;
+        unsigned long prefix  = vcpu->arch.sie_block->prefix;
+        unsigned long origin  = vcpu->kvm->arch.guest_origin;
+        unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
         if ((guestsrc < 2 * PAGE_SIZE) && (guestsrc + n > 2 * PAGE_SIZE))
                 goto slowpath;
@@ -238,11 +240,12 @@ slowpath:
         return __copy_from_guest_slow(vcpu, to, guestsrc, n);
 }
 
-static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu,
+                                         unsigned long guestdest,
                                          const void *from, unsigned long n)
 {
-        u64 origin  = vcpu->kvm->arch.guest_origin;
-        u64 memsize = vcpu->kvm->arch.guest_memsize;
+        unsigned long origin  = vcpu->kvm->arch.guest_origin;
+        unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
         if (guestdest + n > memsize)
                 return -EFAULT;
@@ -256,10 +259,11 @@ static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest,
 }
 
 static inline int copy_from_guest_absolute(struct kvm_vcpu *vcpu, void *to,
-                                           u64 guestsrc, unsigned long n)
+                                           unsigned long guestsrc,
+                                           unsigned long n)
 {
-        u64 origin  = vcpu->kvm->arch.guest_origin;
-        u64 memsize = vcpu->kvm->arch.guest_memsize;
+        unsigned long origin  = vcpu->kvm->arch.guest_origin;
+        unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
         if (guestsrc + n > memsize)
                 return -EFAULT;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 47a0b642174c..61236102203e 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -20,7 +20,7 @@
 #include "kvm-s390.h"
 #include "gaccess.h"
 
-static int handle_lctg(struct kvm_vcpu *vcpu)
+static int handle_lctlg(struct kvm_vcpu *vcpu)
 {
         int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
         int reg3 = vcpu->arch.sie_block->ipa & 0x000f;
@@ -30,7 +30,7 @@ static int handle_lctg(struct kvm_vcpu *vcpu)
         u64 useraddr;
         int reg, rc;
 
-        vcpu->stat.instruction_lctg++;
+        vcpu->stat.instruction_lctlg++;
         if ((vcpu->arch.sie_block->ipb & 0xff) != 0x2f)
                 return -ENOTSUPP;
 
@@ -38,9 +38,12 @@ static int handle_lctg(struct kvm_vcpu *vcpu)
         if (base2)
                 useraddr += vcpu->arch.guest_gprs[base2];
 
+        if (useraddr & 7)
+                return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
         reg = reg1;
 
-        VCPU_EVENT(vcpu, 5, "lctg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
+        VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
                    disp2);
 
         do {
@@ -74,6 +77,9 @@ static int handle_lctl(struct kvm_vcpu *vcpu)
         if (base2)
                 useraddr += vcpu->arch.guest_gprs[base2];
 
+        if (useraddr & 3)
+                return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
         VCPU_EVENT(vcpu, 5, "lctl r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
                    disp2);
 
@@ -99,7 +105,7 @@ static intercept_handler_t instruction_handlers[256] = {
         [0xae] = kvm_s390_handle_sigp,
         [0xb2] = kvm_s390_handle_priv,
         [0xb7] = handle_lctl,
-        [0xeb] = handle_lctg,
+        [0xeb] = handle_lctlg,
 };
 
 static int handle_noop(struct kvm_vcpu *vcpu)
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 84a7fed4cd4e..2960702b4824 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -13,6 +13,7 @@
 #include <asm/lowcore.h>
 #include <asm/uaccess.h>
 #include <linux/kvm_host.h>
+#include <linux/signal.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -31,7 +32,7 @@ static int psw_interrupts_disabled(struct kvm_vcpu *vcpu)
 }
 
 static int __interrupt_is_deliverable(struct kvm_vcpu *vcpu,
-                                      struct interrupt_info *inti)
+                                      struct kvm_s390_interrupt_info *inti)
 {
         switch (inti->type) {
         case KVM_S390_INT_EMERGENCY:
@@ -91,7 +92,7 @@ static void __set_cpuflag(struct kvm_vcpu *vcpu, u32 flag)
 }
 
 static void __set_intercept_indicator(struct kvm_vcpu *vcpu,
-                                      struct interrupt_info *inti)
+                                      struct kvm_s390_interrupt_info *inti)
 {
         switch (inti->type) {
         case KVM_S390_INT_EMERGENCY:
@@ -111,7 +112,7 @@ static void __set_intercept_indicator(struct kvm_vcpu *vcpu,
 }
 
 static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
-                                   struct interrupt_info *inti)
+                                   struct kvm_s390_interrupt_info *inti)
 {
         const unsigned short table[] = { 2, 4, 4, 6 };
         int rc, exception = 0;
@@ -246,15 +247,10 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
         default:
                 BUG();
         }
-
         if (exception) {
-                VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering"
-                           " interrupt");
-                kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-                if (inti->type == KVM_S390_PROGRAM_INT) {
-                        printk(KERN_WARNING "kvm: recursive program check\n");
-                        BUG();
-                }
+                printk("kvm: The guest lowcore is not mapped during interrupt "
+                        "delivery, killing userspace\n");
+                do_exit(SIGKILL);
         }
 }
 
@@ -277,22 +273,19 @@ static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu)
                 __LC_EXT_NEW_PSW, sizeof(psw_t));
         if (rc == -EFAULT)
                 exception = 1;
-
         if (exception) {
-                VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering" \
-                           " ckc interrupt");
-                kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-                return 0;
+                printk("kvm: The guest lowcore is not mapped during interrupt "
+                        "delivery, killing userspace\n");
+                do_exit(SIGKILL);
         }
-
         return 1;
 }
 
 int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 {
-        struct local_interrupt *li = &vcpu->arch.local_int;
-        struct float_interrupt *fi = vcpu->arch.local_int.float_int;
-        struct interrupt_info  *inti;
+        struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+        struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
+        struct kvm_s390_interrupt_info  *inti;
         int rc = 0;
 
         if (atomic_read(&li->active)) {
@@ -408,9 +401,9 @@ void kvm_s390_idle_wakeup(unsigned long data)
 
 void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 {
-        struct local_interrupt *li = &vcpu->arch.local_int;
-        struct float_interrupt *fi = vcpu->arch.local_int.float_int;
-        struct interrupt_info  *n, *inti = NULL;
+        struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+        struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
+        struct kvm_s390_interrupt_info  *n, *inti = NULL;
         int deliver;
 
         __reset_intercept_indicators(vcpu);
@@ -465,8 +458,8 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 {
-        struct local_interrupt *li = &vcpu->arch.local_int;
-        struct interrupt_info *inti;
+        struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+        struct kvm_s390_interrupt_info *inti;
 
         inti = kzalloc(sizeof(*inti), GFP_KERNEL);
         if (!inti)
@@ -487,9 +480,9 @@ int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 int kvm_s390_inject_vm(struct kvm *kvm,
                        struct kvm_s390_interrupt *s390int)
 {
-        struct local_interrupt *li;
-        struct float_interrupt *fi;
-        struct interrupt_info *inti;
+        struct kvm_s390_local_interrupt *li;
+        struct kvm_s390_float_interrupt *fi;
+        struct kvm_s390_interrupt_info *inti;
         int sigcpu;
 
         inti = kzalloc(sizeof(*inti), GFP_KERNEL);
@@ -544,8 +537,8 @@ int kvm_s390_inject_vm(struct kvm *kvm,
 int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
                          struct kvm_s390_interrupt *s390int)
 {
-        struct local_interrupt *li;
-        struct interrupt_info *inti;
+        struct kvm_s390_local_interrupt *li;
+        struct kvm_s390_interrupt_info *inti;
 
         inti = kzalloc(sizeof(*inti), GFP_KERNEL);
         if (!inti)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 6558b09ff579..8b00eb2ddf57 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -39,7 +39,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
         { "exit_instruction", VCPU_STAT(exit_instruction) },
         { "exit_program_interruption", VCPU_STAT(exit_program_interruption) },
         { "exit_instr_and_program_int", VCPU_STAT(exit_instr_and_program) },
-        { "instruction_lctg", VCPU_STAT(instruction_lctg) },
+        { "instruction_lctlg", VCPU_STAT(instruction_lctlg) },
         { "instruction_lctl", VCPU_STAT(instruction_lctl) },
         { "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) },
         { "deliver_service_signal", VCPU_STAT(deliver_service_signal) },
@@ -79,10 +79,6 @@ void kvm_arch_hardware_disable(void *garbage)
 {
 }
 
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 int kvm_arch_hardware_setup(void)
 {
         return 0;
@@ -116,7 +112,12 @@ long kvm_arch_dev_ioctl(struct file *filp,
 
 int kvm_dev_ioctl_check_extension(long ext)
 {
-        return 0;
+        switch (ext) {
+        case KVM_CAP_USER_MEMORY:
+                return 1;
+        default:
+                return 0;
+        }
 }
 
 /* Section: vm related */
@@ -198,6 +199,7 @@ out_nokvm:
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
         debug_unregister(kvm->arch.dbf);
+        kvm_free_physmem(kvm);
         free_page((unsigned long)(kvm->arch.sca));
         kfree(kvm);
         module_put(THIS_MODULE);
@@ -250,11 +252,16 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)
         vcpu->arch.sie_block->gbea = 1;
 }
 
+/* The current code can have up to 256 pages for virtio */
+#define VIRTIODESCSPACE (256ul * 4096ul)
+
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
         atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH);
-        vcpu->arch.sie_block->gmslm = 0xffffffffffUL;
-        vcpu->arch.sie_block->gmsor = 0x000000000000;
+        vcpu->arch.sie_block->gmslm = vcpu->kvm->arch.guest_memsize +
+                                      vcpu->kvm->arch.guest_origin +
+                                      VIRTIODESCSPACE - 1ul;
+        vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
         vcpu->arch.sie_block->ecb   = 2;
         vcpu->arch.sie_block->eca   = 0xC1002001U;
         setup_timer(&vcpu->arch.ckc_timer, kvm_s390_idle_wakeup,
@@ -273,7 +280,8 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
         if (!vcpu)
                 goto out_nomem;
 
-        vcpu->arch.sie_block = (struct sie_block *) get_zeroed_page(GFP_KERNEL);
+        vcpu->arch.sie_block = (struct kvm_s390_sie_block *)
+                                        get_zeroed_page(GFP_KERNEL);
 
         if (!vcpu->arch.sie_block)
                 goto out_free_cpu;
@@ -672,6 +680,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
         return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
+
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 {
         return gfn;
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index c02286c6a931..2e2d2ffb6a07 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -199,7 +199,7 @@ out:
 
 static void handle_stsi_3_2_2(struct kvm_vcpu *vcpu, struct sysinfo_3_2_2 *mem)
 {
-        struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
+        struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
         int cpus = 0;
         int n;
 
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 0a236acfb5f6..170392687ce0 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -43,9 +43,10 @@
 #define SIGP_STAT_RECEIVER_CHECK    0x00000001UL
 
 
-static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg)
+static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr,
+                        unsigned long *reg)
 {
-        struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
+        struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
         int rc;
 
         if (cpu_addr >= KVM_MAX_VCPUS)
@@ -71,9 +72,9 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg)
 
 static int __sigp_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr)
 {
-        struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-        struct local_interrupt *li;
-        struct interrupt_info *inti;
+        struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+        struct kvm_s390_local_interrupt *li;
+        struct kvm_s390_interrupt_info *inti;
         int rc;
 
         if (cpu_addr >= KVM_MAX_VCPUS)
@@ -108,9 +109,9 @@ unlock:
 
 static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store)
 {
-        struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-        struct local_interrupt *li;
-        struct interrupt_info *inti;
+        struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+        struct kvm_s390_local_interrupt *li;
+        struct kvm_s390_interrupt_info *inti;
         int rc;
 
         if (cpu_addr >= KVM_MAX_VCPUS)
@@ -167,11 +168,11 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
 }
 
 static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
-                             u64 *reg)
+                             unsigned long *reg)
 {
-        struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-        struct local_interrupt *li;
-        struct interrupt_info *inti;
+        struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+        struct kvm_s390_local_interrupt *li;
+        struct kvm_s390_interrupt_info *inti;
         int rc;
         u8 tmp;
 
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index f4b6124fdb75..f28c43d2f61d 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -72,7 +72,8 @@ void arch_release_hugepage(struct page *page)
         page[1].index = 0;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+                        unsigned long addr, unsigned long sz)
 {
         pgd_t *pgdp;
         pud_t *pudp;
@@ -119,6 +120,11 @@ int pmd_huge(pmd_t pmd)
         return !!(pmd_val(pmd) & _SEGMENT_ENTRY_LARGE);
 }
 
+int pud_huge(pud_t pud)
+{
+        return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
                              pmd_t *pmdp, int write)
 {
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 388cc7420055..4993b0f594eb 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -42,38 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE)));
 char  empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 
-void show_mem(void)
-{
-        unsigned long i, total = 0, reserved = 0;
-        unsigned long shared = 0, cached = 0;
-        unsigned long flags;
-        struct page *page;
-        pg_data_t *pgdat;
-
-        printk("Mem-info:\n");
-        show_free_areas();
-        for_each_online_pgdat(pgdat) {
-                pgdat_resize_lock(pgdat, &flags);
-                for (i = 0; i < pgdat->node_spanned_pages; i++) {
-                        if (!pfn_valid(pgdat->node_start_pfn + i))
-                                continue;
-                        page = pfn_to_page(pgdat->node_start_pfn + i);
-                        total++;
-                        if (PageReserved(page))
-                                reserved++;
-                        else if (PageSwapCache(page))
-                                cached++;
-                        else if (page_count(page))
-                                shared += page_count(page) - 1;
-                }
-                pgdat_resize_unlock(pgdat, &flags);
-        }
-        printk("%ld pages of RAM\n", total);
-        printk("%ld reserved pages\n", reserved);
-        printk("%ld pages shared\n", shared);
-        printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 81894f0985aa..0b88dc462d73 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux/SuperH Kernel Configuration"
 config SUPERH
         def_bool y
         select EMBEDDED
+        select HAVE_CLK
         select HAVE_IDE
         select HAVE_OPROFILE
         select HAVE_GENERIC_DMA_COHERENT
@@ -477,6 +478,10 @@ config SH_RTS7751R2D
           Select RTS7751R2D if configuring for a Renesas Technology
           Sales SH-Graphics board.
 
+config SH_RSK7203
+        bool "RSK7203"
+        depends on CPU_SUBTYPE_SH7203
+
 config SH_SDK7780
         bool "SDK7780R3"
         depends on CPU_SUBTYPE_SH7780
@@ -491,6 +496,21 @@ config SH_HIGHLANDER
         select SYS_SUPPORTS_PCI
         select IO_TRAPPED
 
+config SH_SH7785LCR
+        bool "SH7785LCR"
+        depends on CPU_SUBTYPE_SH7785
+        select SYS_SUPPORTS_PCI
+        select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+        bool "SH7785LCR 29bit physmaps"
+        depends on SH_SH7785LCR
+        default y
+        help
+          This board has 2 physical memory maps. It can be changed with
+          DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+          you can access all on-board device in 29bit address mode.
+
 config SH_MIGOR
         bool "Migo-R"
         depends on CPU_SUBTYPE_SH7722
@@ -498,6 +518,20 @@ config SH_MIGOR
           Select Migo-R if configuring for the SH7722 Migo-R platform
           by Renesas System Solutions Asia Pte. Ltd.
 
+config SH_AP325RXA
+        bool "AP-325RXA"
+        depends on CPU_SUBTYPE_SH7723
+        help
+          Renesas "AP-325RXA" support.
+          Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+        bool "SH7763RDP"
+        depends on CPU_SUBTYPE_SH7763
+        help
+          Select SH7763RDP if configuring for a Renesas SH7763
+          evaluation board.
+
 config SH_EDOSK7705
         bool "EDOSK7705"
         depends on CPU_SUBTYPE_SH7705
@@ -559,6 +593,7 @@ endmenu
 source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
 source "arch/sh/boards/renesas/r7780rp/Kconfig"
 source "arch/sh/boards/renesas/sdk7780/Kconfig"
+source "arch/sh/boards/renesas/migor/Kconfig"
 source "arch/sh/boards/magicpanelr2/Kconfig"
 
 menu "Timer and clock configuration"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0f4549860226..36f4b1f7066d 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT
         default "0xff804000" if CPU_SUBTYPE_MXG
         default "0xffc30000" if CPU_SUBTYPE_SHX3
         default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
-                                CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
+                                CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
+                                CPU_SUBTYPE_SH7343
         default "0xffe80000" if CPU_SH4
         default "0xffea0000" if CPU_SUBTYPE_SH7785
         default "0xfffe8000" if CPU_SUBTYPE_SH7203
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index fb7b1b15e392..c627e45c4df7 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -121,6 +121,10 @@ machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
 machdir-$(CONFIG_SH_MIGOR)                      += renesas/migor
 machdir-$(CONFIG_SH_SDK7780)                    += renesas/sdk7780
 machdir-$(CONFIG_SH_X3PROTO)                    += renesas/x3proto
+machdir-$(CONFIG_SH_RSK7203)                    += renesas/rsk7203
+machdir-$(CONFIG_SH_AP325RXA)                   += renesas/ap325rxa
+machdir-$(CONFIG_SH_SH7763RDP)                  += renesas/sh7763rdp
+machdir-$(CONFIG_SH_SH7785LCR)                  += renesas/sh7785lcr
 machdir-$(CONFIG_SH_SH4202_MICRODEV)            += superh/microdev
 machdir-$(CONFIG_SH_LANDISK)                    += landisk
 machdir-$(CONFIG_SH_TITAN)                      += titan
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c
index b3a876a3b859..a7433685798d 100644
--- a/arch/sh/boards/dreamcast/rtc.c
+++ b/arch/sh/boards/dreamcast/rtc.c
@@ -30,7 +30,7 @@
  *
  * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
  */
-void aica_rtc_gettimeofday(struct timespec *ts)
+static void aica_rtc_gettimeofday(struct timespec *ts)
 {
         unsigned long val1, val2;
 
@@ -54,7 +54,7 @@ void aica_rtc_gettimeofday(struct timespec *ts)
  *
  * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
  */
-int aica_rtc_settimeofday(const time_t secs)
+static int aica_rtc_settimeofday(const time_t secs)
 {
         unsigned long val1, val2;
         unsigned long adj = secs + TWENTY_YEARS;
diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/renesas/ap325rxa/Makefile
new file mode 100644
index 000000000000..f663768429f0
--- /dev/null
+++ b/arch/sh/boards/renesas/ap325rxa/Makefile
@@ -0,0 +1 @@
+obj-y   := setup.o
diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c
new file mode 100644
index 000000000000..7fa74462bd9f
--- /dev/null
+++ b/arch/sh/boards/renesas/ap325rxa/setup.c
@@ -0,0 +1,313 @@
+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/smc911x.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+
+static struct smc911x_platdata smc911x_info = {
+        .flags = SMC911X_USE_32BIT,
+        .irq_flags = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc9118_resources[] = {
+        [0] = {
+                .start  = 0xb6080000,
+                .end    = 0xb60fffff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 35,
+                .end    = 35,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+
+static struct platform_device smc9118_device = {
+        .name           = "smc911x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(smc9118_resources),
+        .resource       = smc9118_resources,
+        .dev            = {
+                .platform_data = &smc911x_info,
+        },
+};
+
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+        {
+                 .name = "uboot",
+                 .offset = 0,
+                 .size = (1 * 1024 * 1024),
+                 .mask_flags = MTD_WRITEABLE,   /* Read-only */
+        }, {
+                 .name = "kernel",
+                 .offset = MTDPART_OFS_APPEND,
+                 .size = (2 * 1024 * 1024),
+        }, {
+                 .name = "other",
+                 .offset = MTDPART_OFS_APPEND,
+                 .size = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+        .width          = 2,
+        .parts          = ap325rxa_nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+        [0] = {
+                .name   = "NOR Flash",
+                .start  = 0x00000000,
+                .end    = 0x00ffffff,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+        .name           = "physmap-flash",
+        .resource       = ap325rxa_nor_flash_resources,
+        .num_resources  = ARRAY_SIZE(ap325rxa_nor_flash_resources),
+        .dev            = {
+                .platform_data = &ap325rxa_nor_flash_data,
+        },
+};
+
+#define FPGA_LCDREG     0xB4100180
+#define FPGA_BKLREG     0xB4100212
+#define FPGA_LCDREG_VAL 0x0018
+#define PORT_PHCR       0xA405010E
+#define PORT_PLCR       0xA4050114
+#define PORT_PMCR       0xA4050116
+#define PORT_PRCR       0xA405011C
+#define PORT_PSCR       0xA405011E
+#define PORT_PZCR       0xA405014C
+#define PORT_HIZCRA     0xA4050158
+#define PORT_MSELCRB    0xA4050182
+#define PORT_PSDR       0xA405013E
+#define PORT_PZDR       0xA405016C
+#define PORT_PSELD      0xA4050154
+
+static void ap320_wvga_power_on(void *board_data)
+{
+        msleep(100);
+
+        /* ASD AP-320/325 LCD ON */
+        ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+
+        /* backlight */
+        ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
+        ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+        ctrl_outw(0x100, FPGA_BKLREG);
+}
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+        .clock_source = LCDC_CLK_EXTERNAL,
+        .ch[0] = {
+                .chan = LCDC_CHAN_MAINLCD,
+                .bpp = 16,
+                .interface_type = RGB18,
+                .clock_divider = 1,
+                .lcd_cfg = {
+                        .name = "LB070WV1",
+                        .xres = 800,
+                        .yres = 480,
+                        .left_margin = 40,
+                        .right_margin = 160,
+                        .hsync_len = 8,
+                        .upper_margin = 63,
+                        .lower_margin = 80,
+                        .vsync_len = 1,
+                        .sync = 0, /* hsync and vsync are active low */
+                },
+                .board_cfg = {
+                        .display_on = ap320_wvga_power_on,
+                },
+        }
+};
+
+static struct resource lcdc_resources[] = {
+        [0] = {
+                .name   = "LCDC",
+                .start  = 0xfe940000, /* P4-only space */
+                .end    = 0xfe941fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device lcdc_device = {
+        .name           = "sh_mobile_lcdc_fb",
+        .num_resources  = ARRAY_SIZE(lcdc_resources),
+        .resource       = lcdc_resources,
+        .dev            = {
+                .platform_data  = &lcdc_info,
+        },
+};
+
+static unsigned char camera_ncm03j_magic[] =
+{
+        0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+        0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+        0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+        0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+        0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+        0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+        0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+        0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+        0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+        0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+        0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+        0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+        0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+        0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+        0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+        0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+                              int enable)
+{
+        struct i2c_adapter *a = i2c_get_adapter(0);
+        struct i2c_msg msg;
+        int ret = 0;
+        int i;
+
+        if (!enable)
+                return 0; /* no disable for now */
+
+        for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+                u_int8_t buf[8];
+
+                msg.addr = 0x6e;
+                msg.buf = buf;
+                msg.len = 2;
+                msg.flags = 0;
+
+                buf[0] = camera_ncm03j_magic[i];
+                buf[1] = camera_ncm03j_magic[i + 1];
+
+                ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+        }
+
+        return ret;
+}
+
+static struct soc_camera_platform_info camera_info = {
+        .iface = 0,
+        .format_name = "UYVY",
+        .format_depth = 16,
+        .format = {
+                .pixelformat = V4L2_PIX_FMT_UYVY,
+                .colorspace = V4L2_COLORSPACE_SMPTE170M,
+                .width = 640,
+                .height = 480,
+        },
+        .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+        SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+        .set_capture = camera_set_capture,
+};
+
+static struct platform_device camera_device = {
+        .name           = "soc_camera_platform",
+        .dev            = {
+                .platform_data  = &camera_info,
+        },
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+        .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+        SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+};
+
+static struct resource ceu_resources[] = {
+        [0] = {
+                .name   = "CEU",
+                .start  = 0xfe910000,
+                .end    = 0xfe91009f,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 52,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device ceu_device = {
+        .name           = "sh_mobile_ceu",
+        .num_resources  = ARRAY_SIZE(ceu_resources),
+        .resource       = ceu_resources,
+        .dev            = {
+                .platform_data  = &sh_mobile_ceu_info,
+        },
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+        &smc9118_device,
+        &ap325rxa_nor_flash_device,
+        &lcdc_device,
+        &ceu_device,
+        &camera_device,
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+};
+
+static int __init ap325rxa_devices_setup(void)
+{
+        clk_always_enable("mstp200"); /* LCDC */
+        clk_always_enable("mstp203"); /* CEU */
+
+        platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+        i2c_register_board_info(0, ap325rxa_i2c_devices,
+                                ARRAY_SIZE(ap325rxa_i2c_devices));
+ 
+        return platform_add_devices(ap325rxa_devices,
+                                ARRAY_SIZE(ap325rxa_devices));
+}
+device_initcall(ap325rxa_devices_setup);
+
+static void __init ap325rxa_setup(char **cmdline_p)
+{
+        /* LCDC configuration */
+        ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
+        ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
+        ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
+        ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
+        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
+
+        /* CEU */
+        ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+        ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
+        ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
+        ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+        .mv_name = "AP-325RXA",
+        .mv_setup = ap325rxa_setup,
+};
diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/renesas/migor/Kconfig
new file mode 100644
index 000000000000..a7b3b728ec3c
--- /dev/null
+++ b/arch/sh/boards/renesas/migor/Kconfig
@@ -0,0 +1,15 @@
+if SH_MIGOR
+
+choice
+        prompt "Migo-R LCD Panel Board Selection"
+        default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+        bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+        bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile
index 77037567633b..5f231dd25c0e 100644
--- a/arch/sh/boards/renesas/migor/Makefile
+++ b/arch/sh/boards/renesas/migor/Makefile
@@ -1 +1,2 @@
 obj-y    := setup.o
+obj-$(CONFIG_SH_MIGOR_QVGA)     +=  lcd_qvga.o
diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/renesas/migor/lcd_qvga.c
new file mode 100644
index 000000000000..6e9609596448
--- /dev/null
+++ b/arch/sh/boards/renesas/migor/lcd_qvga.c
@@ -0,0 +1,165 @@
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+        ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
+        mdelay(2);
+        ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
+        mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+        unsigned long tmp1, tmp2;
+
+        tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+        tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+        return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+                       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+                       unsigned short reg, unsigned short data)
+{
+        sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+                        struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+                        unsigned short reg, unsigned short data)
+{
+        sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+        sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+                                struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+                                unsigned short reg)
+{
+        unsigned long data;
+
+        sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+        data = sys_ops->read_data(sys_ops_handle);
+        return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+                               struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+                               unsigned short const *data, int no_data)
+{
+        int i;
+
+        for (i = 0; i < no_data; i += 2)
+                write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+        0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+        0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+        0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+        0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+        0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+        0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+        0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+        0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+        0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+        0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+        0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+        0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+        0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *board_data, void *sohandle,
+                         struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+        unsigned long xres = 320;
+        unsigned long yres = 240;
+        int k;
+
+        reset_lcd_module();
+        migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+        if (read_reg16(sohandle, so, 0) != 0x1505)
+                return -ENODEV;
+
+        pr_info("Migo-R QVGA LCD Module detected.\n");
+
+        migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+        write_reg16(sohandle, so, 0x00A4, 0x0001);
+        mdelay(10);
+
+        migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+        mdelay(100);
+
+        migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+        write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+        write_reg16(sohandle, so, 0x0051, 0x00ef);
+        write_reg16(sohandle, so, 0x0052, 0x0000);
+        write_reg16(sohandle, so, 0x0053, xres - 1);
+
+        migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+        mdelay(10);
+
+        migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+        mdelay(40);
+
+        /* clear GRAM to avoid displaying garbage */
+
+        write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+        write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+        for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+                write_reg16(sohandle, so, 0x0022, 0x0000);
+
+        write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+        write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+        write_reg16(sohandle, so, 0x0007, 0x0173);
+        mdelay(40);
+
+        /* enable display */
+        write_reg(sohandle, so, 0x00, 0x22);
+        mdelay(100);
+        return 0;
+}
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index 01af44245b57..7bd365ad2d06 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -15,9 +15,15 @@
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
 #include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
+#include <asm/sh_mobile_lcdc.h>
 #include <asm/migor.h>
 
 /* Address     IRQ  Size  Bus  Description
@@ -30,7 +36,6 @@
 
 static struct smc91x_platdata smc91x_info = {
         .flags = SMC91X_USE_16BIT,
-        .irq_flags = IRQF_TRIGGER_HIGH,
 };
 
 static struct resource smc91x_eth_resources[] = {
@@ -42,7 +47,7 @@ static struct resource smc91x_eth_resources[] = {
         },
         [1] = {
                 .start  = 32, /* IRQ0 */
-                .flags  = IORESOURCE_IRQ,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
         },
 };
 
@@ -199,14 +204,237 @@ static struct platform_device migor_nand_flash_device = {
         }
 };
 
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+        .clock_source = LCDC_CLK_BUS,
+        .ch[0] = {
+                .chan = LCDC_CHAN_MAINLCD,
+                .bpp = 16,
+                .interface_type = RGB16,
+                .clock_divider = 2,
+                .lcd_cfg = {
+                        .name = "LB070WV1",
+                        .xres = 800,
+                        .yres = 480,
+                        .left_margin = 64,
+                        .right_margin = 16,
+                        .hsync_len = 120,
+                        .upper_margin = 1,
+                        .lower_margin = 17,
+                        .vsync_len = 2,
+                        .sync = 0,
+                },
+        }
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+        .clock_source = LCDC_CLK_PERIPHERAL,
+        .ch[0] = {
+                .chan = LCDC_CHAN_MAINLCD,
+                .bpp = 16,
+                .interface_type = SYS16A,
+                .clock_divider = 10,
+                .lcd_cfg = {
+                        .name = "PH240320T",
+                        .xres = 320,
+                        .yres = 240,
+                        .left_margin = 0,
+                        .right_margin = 16,
+                        .hsync_len = 8,
+                        .upper_margin = 1,
+                        .lower_margin = 17,
+                        .vsync_len = 2,
+                        .sync = FB_SYNC_HOR_HIGH_ACT,
+                },
+                .board_cfg = {
+                        .setup_sys = migor_lcd_qvga_setup,
+                },
+                .sys_bus_cfg = {
+                        .ldmt2r = 0x06000a09,
+                        .ldmt3r = 0x180e3418,
+                },
+        }
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+        [0] = {
+                .name   = "LCDC",
+                .start  = 0xfe940000, /* P4-only space */
+                .end    = 0xfe941fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device migor_lcdc_device = {
+        .name           = "sh_mobile_lcdc_fb",
+        .num_resources  = ARRAY_SIZE(migor_lcdc_resources),
+        .resource       = migor_lcdc_resources,
+        .dev    = {
+                .platform_data  = &sh_mobile_lcdc_info,
+        },
+};
+
+static struct clk *camera_clk;
+
+static void camera_power_on(void)
+{
+        unsigned char value;
+
+        camera_clk = clk_get(NULL, "video_clk");
+        clk_set_rate(camera_clk, 24000000);
+        clk_enable(camera_clk); /* start VIO_CKO */
+
+        mdelay(10);
+        value = ctrl_inb(PORT_PTDR);
+        value &= ~0x09;
+#ifndef CONFIG_SH_MIGOR_RTA_WVGA
+        value |= 0x01;
+#endif
+        ctrl_outb(value, PORT_PTDR);
+        mdelay(10);
+
+        ctrl_outb(value | 8, PORT_PTDR);
+}
+
+static void camera_power_off(void)
+{
+        clk_disable(camera_clk); /* stop VIO_CKO */
+        clk_put(camera_clk);
+
+        ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
+}
+
+static unsigned char camera_ov772x_magic[] =
+{
+        0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
+        0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
+        0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
+        0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
+        0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
+        0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
+        0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
+        0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
+        0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
+        0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
+        0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
+        0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
+        0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
+        0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
+        0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
+        0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
+        0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
+        0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
+        0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
+        0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
+        0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
+        0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
+        0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
+        0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
+        0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
+        0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
+        0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
+        0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
+        0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
+        0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
+        0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
+        0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
+        0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
+        0x2c, 0x78,
+};
+
+static int ov772x_set_capture(struct soc_camera_platform_info *info,
+                              int enable)
+{
+        struct i2c_adapter *a = i2c_get_adapter(0);
+        struct i2c_msg msg;
+        int ret = 0;
+        int i;
+
+        if (!enable)
+                return 0; /* camera_power_off() is enough */
+
+        for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
+                u_int8_t buf[8];
+
+                msg.addr = 0x21;
+                msg.buf = buf;
+                msg.len = 2;
+                msg.flags = 0;
+
+                buf[0] = camera_ov772x_magic[i];
+                buf[1] = camera_ov772x_magic[i + 1];
+
+                ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+        }
+
+        return ret;
+}
+
+static struct soc_camera_platform_info ov772x_info = {
+        .iface = 0,
+        .format_name = "RGB565",
+        .format_depth = 16,
+        .format = {
+                .pixelformat = V4L2_PIX_FMT_RGB565,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .width = 320,
+                .height = 240,
+        },
+        .bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+        SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+        .set_capture = ov772x_set_capture,
+};
+
+static struct platform_device migor_camera_device = {
+        .name           = "soc_camera_platform",
+        .dev    = {
+                .platform_data  = &ov772x_info,
+        },
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+        .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
+        | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
+        .enable_camera = camera_power_on,
+        .disable_camera = camera_power_off,
+};
+
+static struct resource migor_ceu_resources[] = {
+        [0] = {
+                .name   = "CEU",
+                .start  = 0xfe910000,
+                .end    = 0xfe91009f,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 52,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device migor_ceu_device = {
+        .name           = "sh_mobile_ceu",
+        .num_resources  = ARRAY_SIZE(migor_ceu_resources),
+        .resource       = migor_ceu_resources,
+        .dev    = {
+                .platform_data  = &sh_mobile_ceu_info,
+        },
+};
+
 static struct platform_device *migor_devices[] __initdata = {
         &smc91x_eth_device,
         &sh_keysc_device,
+        &migor_lcdc_device,
+        &migor_ceu_device,
+        &migor_camera_device,
         &migor_nor_flash_device,
         &migor_nand_flash_device,
 };
 
-static struct i2c_board_info __initdata migor_i2c_devices[] = {
+static struct i2c_board_info migor_i2c_devices[] = {
         {
                 I2C_BOARD_INFO("rs5c372b", 0x32),
         },
@@ -218,6 +446,12 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = {
 
 static int __init migor_devices_setup(void)
 {
+        clk_always_enable("mstp214"); /* KEYSC */
+        clk_always_enable("mstp200"); /* LCDC */
+        clk_always_enable("mstp203"); /* CEU */
+
+        platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
+
         i2c_register_board_info(0, migor_i2c_devices,
                                 ARRAY_SIZE(migor_i2c_devices));
  
@@ -236,20 +470,51 @@ static void __init migor_setup(char **cmdline_p)
         ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
         ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
         ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-        ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
 
         /* NAND Flash */
         ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
         ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
                   BSC_CS6ABCR);
 
-        /* I2C */
-        ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
-
         /* Touch Panel - Enable IRQ6 */
         ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
         ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
         ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
+
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+        /* LCDC - WVGA - Enable RGB Interface signals */
+        ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+        ctrl_outw(0x0000, PORT_PHCR);
+        ctrl_outw(0x0000, PORT_PLCR);
+        ctrl_outw(0x0000, PORT_PMCR);
+        ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR);
+        ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD);
+        ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB);
+        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+        /* LCDC - QVGA - Enable SYS Interface signals */
+        ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+        ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR);
+        ctrl_outw(0x0000, PORT_PLCR);
+        ctrl_outw(0x0000, PORT_PMCR);
+        ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR);
+        ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD);
+        ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB);
+        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+
+        /* CEU */
+        ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR);
+        ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR);
+        ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR);
+        ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR);
+        ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC);
+        ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD);
+        ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE);
+        ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB);
+        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA);
+        ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB);
 }
 
 static struct sh_machine_vector mv_migor __initmv = {
diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/renesas/rsk7203/Makefile
new file mode 100644
index 000000000000..f663768429f0
--- /dev/null
+++ b/arch/sh/boards/renesas/rsk7203/Makefile
@@ -0,0 +1 @@
+obj-y   := setup.o
diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/renesas/rsk7203/setup.c
new file mode 100644
index 000000000000..0bbda04b03b9
--- /dev/null
+++ b/arch/sh/boards/renesas/rsk7203/setup.c
@@ -0,0 +1,126 @@
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct resource smc911x_resources[] = {
+        [0] = {
+                .start          = 0x24000000,
+                .end            = 0x24000000 + 0x100,
+                .flags          = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start          = 64,
+                .end            = 64,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device smc911x_device = {
+        .name           = "smc911x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(smc911x_resources),
+        .resource       = smc911x_resources,
+};
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk7203_partitions[] = {
+        {
+                .name           = "Bootloader",
+                .offset         = 0x00000000,
+                .size           = 0x00040000,
+                .mask_flags     = MTD_WRITEABLE,
+        }, {
+                .name           = "Kernel",
+                .offset         = MTDPART_OFS_NXTBLK,
+                .size           = 0x001c0000,
+        }, {
+                .name           = "Flash_FS",
+                .offset         = MTDPART_OFS_NXTBLK,
+                .size           = MTDPART_SIZ_FULL,
+        }
+};
+
+static struct physmap_flash_data flash_data = {
+        .width          = 2,
+};
+
+static struct resource flash_resource = {
+        .start          = 0x20000000,
+        .end            = 0x20400000,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+        .name           = "physmap-flash",
+        .id             = -1,
+        .resource       = &flash_resource,
+        .num_resources  = 1,
+        .dev            = {
+                .platform_data = &flash_data,
+        },
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk7203_flash_map = {
+        .name           = "RSK+ Flash",
+        .size           = 0x400000,
+        .bankwidth      = 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+        int nr_parts = 0;
+
+        simple_map_init(&rsk7203_flash_map);
+        flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
+        nr_parts = parse_mtd_partitions(flash_mtd, probes,
+                                        &parsed_partitions, 0);
+        /* If there is no partition table, used the hard coded table */
+        if (nr_parts <= 0) {
+                flash_data.parts = rsk7203_partitions;
+                flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
+        } else {
+                flash_data.nr_parts = nr_parts;
+                flash_data.parts = parsed_partitions;
+        }
+}
+
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+        &smc911x_device,
+        &flash_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+        set_mtd_partitions();
+        return platform_add_devices(rsk7203_devices,
+                                    ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk7203 __initmv = {
+        .mv_name        = "RSK+7203",
+};
diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/renesas/sh7763rdp/Makefile
new file mode 100644
index 000000000000..f6c0b55516d2
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7763rdp/Makefile
@@ -0,0 +1 @@
+obj-y    := setup.o irq.o
diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/renesas/sh7763rdp/irq.c
new file mode 100644
index 000000000000..fd850bad2dec
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7763rdp/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
+ *
+ * Renesas Solutions SH7763RDP Support.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008  Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sh7763rdp.h>
+
+#define INTC_BASE               (0xFFD00000)
+#define INTC_INT2PRI7   (INTC_BASE+0x4001C)
+#define INTC_INT2MSKCR  (INTC_BASE+0x4003C)
+#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_sh7763rdp_IRQ(void)
+{
+        /* GPIO enabled */
+        ctrl_outl(1 << 25, INTC_INT2MSKCR);
+
+        /* enable GPIO interrupts */
+        ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+                  INTC_INT2PRI7);
+
+        /* USBH enabled */
+        ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+
+        /* GETHER enabled */
+        ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+
+        /* DMAC enabled */
+        ctrl_outl(1 << 8, INTC_INT2MSKCR);
+}
diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/renesas/sh7763rdp/setup.c
new file mode 100644
index 000000000000..925f16af7121
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7763rdp/setup.c
@@ -0,0 +1,128 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
+ *
+ * Renesas Solutions sh7763rdp board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/sh7763rdp.h>
+
+/* NOR Flash */
+static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
+        {
+                .name = "U-Boot",
+                .offset = 0,
+                .size = (2 * 128 * 1024),
+                .mask_flags = MTD_WRITEABLE,    /* Read-only */
+        }, {
+                .name = "Linux-Kernel",
+                .offset = MTDPART_OFS_APPEND,
+                .size = (20 * 128 * 1024),
+        }, {
+                .name = "Root Filesystem",
+                .offset = MTDPART_OFS_APPEND,
+                .size = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data sh7763rdp_nor_flash_data = {
+        .width = 2,
+        .parts = sh7763rdp_nor_flash_partitions,
+        .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
+};
+
+static struct resource sh7763rdp_nor_flash_resources[] = {
+        [0] = {
+                .name = "NOR Flash",
+                .start = 0,
+                .end = (64 * 1024 * 1024),
+                .flags = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device sh7763rdp_nor_flash_device = {
+        .name = "physmap-flash",
+        .resource = sh7763rdp_nor_flash_resources,
+        .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
+        .dev = {
+                .platform_data = &sh7763rdp_nor_flash_data,
+        },
+};
+
+static struct platform_device *sh7763rdp_devices[] __initdata = {
+        &sh7763rdp_nor_flash_device,
+};
+
+static int __init sh7763rdp_devices_setup(void)
+{
+        return platform_add_devices(sh7763rdp_devices,
+                                    ARRAY_SIZE(sh7763rdp_devices));
+}
+__initcall(sh7763rdp_devices_setup);
+
+static void __init sh7763rdp_setup(char **cmdline_p)
+{
+        /* Board version check */
+        if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+                printk(KERN_INFO "RTE Standard Configuration\n");
+        else
+                printk(KERN_INFO "RTA Standard Configuration\n");
+
+        /* USB pin select bits (clear bit 5-2 to 0) */
+        ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+        /* USBH setup port I controls to other (clear bits 4-9 to 0) */
+        ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+
+        /* Select USB Host controller */
+        ctrl_outw(0x00, USB_USBHSC);
+
+        /* For LCD */
+        /* set PTJ7-1, bits 15-2 of PJCR to 0 */
+        ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+        /* set PTI5, bits 11-10 of PICR to 0 */
+        ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
+        ctrl_outw(0, PORT_PKCR);
+        ctrl_outw(0, PORT_PLCR);
+        /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
+        ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+        /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
+        ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+
+        /* For HAC */
+        /* bit3-0  0100:HAC & SSI1 enable */
+        ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+        /* bit14      1:SSI_HAC_CLK enable */
+        ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+
+        /* SH-Ether */
+        ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+        ctrl_outw(0x0, PORT_PFCR);
+        ctrl_outw(0x0, PORT_PFCR);
+        ctrl_outw(0x0, PORT_PFCR);
+
+        /* MMC */
+        /*selects SCIF and MMC other functions */
+        ctrl_outw(0x0001, PORT_PSEL0);
+        /* MMC clock operates */
+        ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
+        ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
+        ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+}
+
+static struct sh_machine_vector mv_sh7763rdp __initmv = {
+        .mv_name = "sh7763drp",
+        .mv_setup = sh7763rdp_setup,
+        .mv_nr_irqs = 112,
+        .mv_init_irq = init_sh7763rdp_IRQ,
+};
diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile
new file mode 100644
index 000000000000..77037567633b
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7785lcr/Makefile
@@ -0,0 +1 @@
+obj-y    := setup.o
diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/renesas/sh7785lcr/setup.c
new file mode 100644
index 000000000000..b95d674ee704
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7785lcr/setup.c
@@ -0,0 +1,302 @@
+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <asm/heartbeat.h>
+#include <asm/sh7785lcr.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ *       Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resources[] = {
+        [0] = {
+                .start  = PLD_LEDCR,
+                .end    = PLD_LEDCR,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct heartbeat_data heartbeat_data = {
+        .regsize = 8,
+};
+
+static struct platform_device heartbeat_device = {
+        .name           = "heartbeat",
+        .id             = -1,
+        .dev    = {
+                .platform_data  = &heartbeat_data,
+        },
+        .num_resources  = ARRAY_SIZE(heartbeat_resources),
+        .resource       = heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+        {
+                .name           = "loader",
+                .offset         = 0x00000000,
+                .size           = 512 * 1024,
+        },
+        {
+                .name           = "bootenv",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 512 * 1024,
+        },
+        {
+                .name           = "kernel",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 4 * 1024 * 1024,
+        },
+        {
+                .name           = "data",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+        .width          = 4,
+        .parts          = nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+        [0]     = {
+                .start  = NOR_FLASH_ADDR,
+                .end    = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device nor_flash_device = {
+        .name           = "physmap-flash",
+        .dev            = {
+                .platform_data  = &nor_flash_data,
+        },
+        .num_resources  = ARRAY_SIZE(nor_flash_resources),
+        .resource       = nor_flash_resources,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+        [0] = {
+                .name   = "r8a66597_hcd",
+                .start  = R8A66597_ADDR,
+                .end    = R8A66597_ADDR + R8A66597_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .name   = "r8a66597_hcd",
+                .start  = 2,
+                .end    = 2,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+        .name           = "r8a66597_hcd",
+        .id             = -1,
+        .dev = {
+                .dma_mask               = NULL,
+                .coherent_dma_mask      = 0xffffffff,
+        },
+        .num_resources  = ARRAY_SIZE(r8a66597_usb_host_resources),
+        .resource       = r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+        [0]     = {
+                .start  = SM107_MEM_ADDR,
+                .end    = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1]     = {
+                .start  = SM107_REG_ADDR,
+                .end    = SM107_REG_ADDR + SM107_REG_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2]     = {
+                .start  = 10,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+        .pixclock       = 35714,        /* 28MHz */
+        .xres           = 640,
+        .yres           = 480,
+        .left_margin    = 105,
+        .right_margin   = 16,
+        .upper_margin   = 33,
+        .lower_margin   = 10,
+        .hsync_len      = 39,
+        .vsync_len      = 2,
+        .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+        .pixclock       = 40000,        /* 25MHz */
+        .xres           = 640,
+        .yres           = 480,
+        .left_margin    = 2,
+        .right_margin   = 16,
+        .upper_margin   = 33,
+        .lower_margin   = 10,
+        .hsync_len      = 39,
+        .vsync_len      = 2,
+        .sync           = 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+        .def_bpp        = 16,
+        .def_mode       = &sm501_default_mode_pnl,
+        .flags          = SM501FB_FLAG_USE_INIT_MODE |
+                          SM501FB_FLAG_USE_HWCURSOR |
+                          SM501FB_FLAG_USE_HWACCEL |
+                          SM501FB_FLAG_DISABLE_AT_EXIT |
+                          SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+        .def_bpp        = 16,
+        .def_mode       = &sm501_default_mode_crt,
+        .flags          = SM501FB_FLAG_USE_INIT_MODE |
+                          SM501FB_FLAG_USE_HWCURSOR |
+                          SM501FB_FLAG_USE_HWACCEL |
+                          SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+        .fb_route       = SM501_FB_OWN,
+        .fb_crt         = &sm501_pdata_fbsub_crt,
+        .fb_pnl         = &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+        .gpio_high      = {
+                .set    = 0x00001fe0,
+                .mask   = 0x0,
+        },
+        .devices        = 0,
+        .mclk           = 84 * 1000000,
+        .m1xclk         = 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+        .init           = &sm501_initdata,
+        .fb             = &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+        .name           = "sm501",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &sm501_platform_data,
+        },
+        .num_resources  = ARRAY_SIZE(sm501_resources),
+        .resource       = sm501_resources,
+};
+
+static struct resource i2c_resources[] = {
+        [0] = {
+                .start  = PCA9564_ADDR,
+                .end    = PCA9564_ADDR + PCA9564_SIZE - 1,
+                .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+        },
+        [1] = {
+                .start  = 12,
+                .end    = 12,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+        .gpio                   = 0,
+        .i2c_clock_speed        = I2C_PCA_CON_330kHz,
+        .timeout                = 100,
+};
+
+static struct platform_device i2c_device = {
+        .name           = "i2c-pca-platform",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &i2c_platform_data,
+        },
+        .num_resources  = ARRAY_SIZE(i2c_resources),
+        .resource       = i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+        &heartbeat_device,
+        &nor_flash_device,
+        &r8a66597_usb_host_device,
+        &sm501_device,
+        &i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("r2025sd", 0x32),
+        },
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+        i2c_register_board_info(0, sh7785lcr_i2c_devices,
+                                ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+        return platform_add_devices(sh7785lcr_devices,
+                                    ARRAY_SIZE(sh7785lcr_devices));
+}
+__initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+        plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+        plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static void sh7785lcr_power_off(void)
+{
+        ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+        void __iomem *sm501_reg;
+
+        printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+        pm_power_off = sh7785lcr_power_off;
+
+        /* sm501 DRAM configuration */
+        sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+        writel(0x000307c2, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+        .mv_name                = "SH7785LCR",
+        .mv_setup               = sh7785lcr_setup,
+        .mv_init_irq            = init_sh7785lcr_IRQ,
+};
+
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c
index 763f6deba814..1112e86aa93a 100644
--- a/arch/sh/boards/se/7343/irq.c
+++ b/arch/sh/boards/se/7343/irq.c
@@ -1,202 +1,80 @@
 /*
- * arch/sh/boards/se/7343/irq.c
+ * linux/arch/sh/boards/se/7343/irq.c
  *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/mach/se7343.h>
+#include <asm/se7343.h>
 
-static void
-disable_intreq_irq(unsigned int irq)
+static void disable_se7343_irq(unsigned int irq)
 {
-        int bit = irq - OFFCHIP_IRQ_BASE;
-        u16 val;
-
-        val = ctrl_inw(PA_CPLD_IMSK);
-        val |= 1 << bit;
-        ctrl_outw(val, PA_CPLD_IMSK);
+        unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+        ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
 }
 
-static void
-enable_intreq_irq(unsigned int irq)
+static void enable_se7343_irq(unsigned int irq)
 {
-        int bit = irq - OFFCHIP_IRQ_BASE;
-        u16 val;
-
-        val = ctrl_inw(PA_CPLD_IMSK);
-        val &= ~(1 << bit);
-        ctrl_outw(val, PA_CPLD_IMSK);
+        unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+        ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
 }
 
-static void
-mask_and_ack_intreq_irq(unsigned int irq)
-{
-        disable_intreq_irq(irq);
-}
-
-static unsigned int
-startup_intreq_irq(unsigned int irq)
-{
-        enable_intreq_irq(irq);
-        return 0;
-}
-
-static void
-shutdown_intreq_irq(unsigned int irq)
-{
-        disable_intreq_irq(irq);
-}
-
-static void
-end_intreq_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-                enable_intreq_irq(irq);
-}
-
-static struct hw_interrupt_type intreq_irq_type = {
-        .typename = "FPGA-IRQ",
-        .startup = startup_intreq_irq,
-        .shutdown = shutdown_intreq_irq,
-        .enable = enable_intreq_irq,
-        .disable = disable_intreq_irq,
-        .ack = mask_and_ack_intreq_irq,
-        .end = end_intreq_irq
+static struct irq_chip se7343_irq_chip __read_mostly = {
+        .name           = "SE7343-FPGA",
+        .mask           = disable_se7343_irq,
+        .unmask         = enable_se7343_irq,
+        .mask_ack       = disable_se7343_irq,
 };
 
-static void
-make_intreq_irq(unsigned int irq)
-{
-        disable_irq_nosync(irq);
-        irq_desc[irq].chip = &intreq_irq_type;
-        disable_intreq_irq(irq);
-}
-
-int
-shmse_irq_demux(int irq)
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-        int bit;
-        volatile u16 val;
-
-        if (irq == IRQ5_IRQ) {
-                /* Read status Register */
-                val = ctrl_inw(PA_CPLD_ST);
-                bit = ffs(val);
-                if (bit != 0)
-                        return OFFCHIP_IRQ_BASE + bit - 1;
+        unsigned short intv = ctrl_inw(PA_CPLD_ST);
+        struct irq_desc *ext_desc;
+        unsigned int ext_irq = SE7343_FPGA_IRQ_BASE;
+
+        intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+
+        while (intv) {
+                if (intv & 1) {
+                        ext_desc = irq_desc + ext_irq;
+                        handle_level_irq(ext_irq, ext_desc);
+                }
+                intv >>= 1;
+                ext_irq++;
         }
-        return irq;
 }
 
-/* IRQ5 is multiplexed between the following sources:
- * 1. PC Card socket
- * 2. Extension slot
- * 3. USB Controller
- * 4. Serial Controller
- *
- * We configure IRQ5 as a cascade IRQ.
- */
-static struct irqaction irq5 = {
-        .handler = no_action,
-        .mask = CPU_MASK_NONE,
-        .name = "IRQ5-cascade",
-};
-
-static struct ipr_data se7343_irq5_ipr_map[] = {
-        { IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY },
-};
-static struct ipr_data se7343_siof0_vpu_ipr_map[] = {
-        { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-        { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
-};
-static struct ipr_data se7343_other_ipr_map[] = {
-        { DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-        { DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-        { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-        { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-        { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-        { DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-
-        /* I2C block */
-        { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-        { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-        { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-        { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-
-        { IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-        { IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-        { IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-        { IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-
-        /* SIOF */
-        { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-
-        /* SIU */
-        { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
-
-        /* VIO interrupt */
-        { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-        { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-        { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-
-        /*MFI interrupt*/
-
-        { MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY },
-
-        /* LCD controller */
-        { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
-};
-
 /*
  * Initialize IRQ setting
  */
-void __init
-init_7343se_IRQ(void)
+void __init init_7343se_IRQ(void)
 {
-        /* Setup Multiplexed interrupts */
-        ctrl_outw(8, PA_CPLD_MODESET);  /* Set all CPLD interrupts to active
-                                         * low.
-                                         */
-        /* Mask all CPLD controller interrupts */
-        ctrl_outw(0x0fff, PA_CPLD_IMSK);
-
-        /* PC Card interrupts */
-        make_intreq_irq(PC_IRQ0);
-        make_intreq_irq(PC_IRQ1);
-        make_intreq_irq(PC_IRQ2);
-        make_intreq_irq(PC_IRQ3);
-
-        /* Extension Slot Interrupts */
-        make_intreq_irq(EXT_IRQ0);
-        make_intreq_irq(EXT_IRQ1);
-        make_intreq_irq(EXT_IRQ2);
-        make_intreq_irq(EXT_IRQ3);
-
-        /* USB Controller interrupts */
-        make_intreq_irq(USB_IRQ0);
-        make_intreq_irq(USB_IRQ1);
-
-        /* Serial Controller interrupts */
-        make_intreq_irq(UART_IRQ0);
-        make_intreq_irq(UART_IRQ1);
-
-        /* Setup all external interrupts to be active low */
-        ctrl_outw(0xaaaa, INTC_ICR1);
-
-        make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map));
-
-        setup_irq(IRQ5_IRQ, &irq5);
-        /* Set port control to use IRQ5 */
-        *(u16 *)0xA4050108 &= ~0xc;
-
-        make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map));
-
-        ctrl_outb(0x0f, INTC_IMCR5);    /* enable SCIF IRQ */
-
-        make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map));
-
-        ctrl_outw(0x2000, PA_MRSHPC + 0x0c);    /* mrshpc irq enable */
+        int i;
+
+        ctrl_outw(0, PA_CPLD_IMSK);     /* disable all irqs */
+        ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+
+        for (i = 0; i < SE7343_FPGA_IRQ_NR; i++)
+                set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i,
+                                              &se7343_irq_chip,
+                                              handle_level_irq, "level");
+
+        set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+        set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+        set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+        set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+        set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+        set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+        set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+        set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
 }
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
index c9431b3a051b..8ae718d6c710 100644
--- a/arch/sh/boards/se/7343/setup.c
+++ b/arch/sh/boards/se/7343/setup.c
@@ -1,10 +1,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 #include <asm/machvec.h>
 #include <asm/mach/se7343.h>
+#include <asm/heartbeat.h>
 #include <asm/irq.h>
-
-void init_7343se_IRQ(void);
+#include <asm/io.h>
 
 static struct resource smc91x_resources[] = {
         [0] = {
@@ -17,8 +18,8 @@ static struct resource smc91x_resources[] = {
                  * shared with other devices via externel
                  * interrupt controller in FPGA...
                  */
-                .start  = EXT_IRQ2,
-                .end    = EXT_IRQ2,
+                .start  = SMC_IRQ,
+                .end    = SMC_IRQ,
                 .flags  = IORESOURCE_IRQ,
         },
 };
@@ -38,16 +39,65 @@ static struct resource heartbeat_resources[] = {
         },
 };
 
+static struct heartbeat_data heartbeat_data = {
+        .regsize = 16,
+};
+
 static struct platform_device heartbeat_device = {
         .name           = "heartbeat",
         .id             = -1,
+        .dev = {
+                .platform_data = &heartbeat_data,
+        },
         .num_resources  = ARRAY_SIZE(heartbeat_resources),
         .resource       = heartbeat_resources,
 };
 
+static struct mtd_partition nor_flash_partitions[] = {
+        {
+                .name           = "loader",
+                .offset         = 0x00000000,
+                .size           = 128 * 1024,
+        },
+        {
+                .name           = "rootfs",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 31 * 1024 * 1024,
+        },
+        {
+                .name           = "data",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+        .width          = 2,
+        .parts          = nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+        [0]     = {
+                .start  = 0x00000000,
+                .end    = 0x01ffffff,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device nor_flash_device = {
+        .name           = "physmap-flash",
+        .dev            = {
+                .platform_data  = &nor_flash_data,
+        },
+        .num_resources  = ARRAY_SIZE(nor_flash_resources),
+        .resource       = nor_flash_resources,
+};
+
 static struct platform_device *sh7343se_platform_devices[] __initdata = {
         &smc91x_device,
         &heartbeat_device,
+        &nor_flash_device,
 };
 
 static int __init sh7343se_devices_setup(void)
@@ -55,10 +105,19 @@ static int __init sh7343se_devices_setup(void)
         return platform_add_devices(sh7343se_platform_devices,
                                     ARRAY_SIZE(sh7343se_platform_devices));
 }
+device_initcall(sh7343se_devices_setup);
 
+/*
+ * Initialize the board
+ */
 static void __init sh7343se_setup(char **cmdline_p)
 {
-        device_initcall(sh7343se_devices_setup);
+        ctrl_outw(0xf900, FPGA_OUT);    /* FPGA */
+
+        ctrl_outw(0x0002, PORT_PECR);   /* PORT E 1 = IRQ5 */
+        ctrl_outw(0x0020, PORT_PSELD);
+
+        printk(KERN_INFO "MS7343CP01 Setup...done\n");
 }
 
 /*
@@ -90,5 +149,4 @@ static struct sh_machine_vector mv_7343se __initmv = {
         .mv_outsl = sh7343se_outsl,
 
         .mv_init_irq = init_7343se_IRQ,
-        .mv_irq_demux = shmse_irq_demux,
 };
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
index c4550473d4c3..b1ec085b8673 100644
--- a/arch/sh/boards/se/770x/io.c
+++ b/arch/sh/boards/se/770x/io.c
@@ -1,25 +1,13 @@
-/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $
- *
- * linux/arch/sh/kernel/io_se.c
- *
+/*
  * Copyright (C) 2000  Kazumoto Kojima
  *
  * I/O routine for Hitachi SolutionEngine.
- *
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
 #include <asm/se.h>
 
-/* SH pcmcia io window base, start and end.  */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-
 /* MS7750 requires special versions of in*, out* routines, since
    PC-like io ports are located at upper half byte of 16-bit word which
    can be accessed only with 16-bit wide.  */
@@ -33,8 +21,6 @@ port2adr(unsigned int port)
                 return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
         else if (port >= 0x1000)
                 return (volatile __u16 *) (PA_83902 + (port << 1));
-        else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-                return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1));
         else
                 return (volatile __u16 *) (PA_SUPERIO + (port << 1));
 }
@@ -51,32 +37,27 @@ shifted_port(unsigned long port)
 
 unsigned char se_inb(unsigned long port)
 {
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-                return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-        else if (shifted_port(port))
-                return (*port2adr(port) >> 8); 
+        if (shifted_port(port))
+                return (*port2adr(port) >> 8);
         else
-                return (*port2adr(port))&0xff; 
+                return (*port2adr(port))&0xff;
 }
 
 unsigned char se_inb_p(unsigned long port)
 {
         unsigned long v;
 
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-                v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-        else if (shifted_port(port))
-                v = (*port2adr(port) >> 8); 
+        if (shifted_port(port))
+                v = (*port2adr(port) >> 8);
         else
-                v = (*port2adr(port))&0xff; 
+                v = (*port2adr(port))&0xff;
         ctrl_delay();
         return v;
 }
 
 unsigned short se_inw(unsigned long port)
 {
-        if (port >= 0x2000 ||
-            (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
+        if (port >= 0x2000)
                 return *port2adr(port);
         else
                 maybebadio(port);
@@ -91,9 +72,7 @@ unsigned int se_inl(unsigned long port)
 
 void se_outb(unsigned char value, unsigned long port)
 {
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-                *(__u8 *)(sh_pcic_io_wbase + port) = value; 
-        else if (shifted_port(port))
+        if (shifted_port(port))
                 *(port2adr(port)) = value << 8;
         else
                 *(port2adr(port)) = value;
@@ -101,9 +80,7 @@ void se_outb(unsigned char value, unsigned long port)
 
 void se_outb_p(unsigned char value, unsigned long port)
 {
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-                *(__u8 *)(sh_pcic_io_wbase + port) = value; 
-        else if (shifted_port(port))
+        if (shifted_port(port))
                 *(port2adr(port)) = value << 8;
         else
                 *(port2adr(port)) = value;
@@ -112,8 +89,7 @@ void se_outb_p(unsigned char value, unsigned long port)
 
 void se_outw(unsigned short value, unsigned long port)
 {
-        if (port >= 0x2000 ||
-            (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
+        if (port >= 0x2000)
                 *port2adr(port) = value;
         else
                 maybebadio(port);
@@ -129,11 +105,7 @@ void se_insb(unsigned long port, void *addr, unsigned long count)
         volatile __u16 *p = port2adr(port);
         __u8 *ap = addr;
 
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-                volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-                while (count--)
-                        *ap++ = *bp;
-        } else if (shifted_port(port)) {
+        if (shifted_port(port)) {
                 while (count--)
                         *ap++ = *p >> 8;
         } else {
@@ -160,11 +132,7 @@ void se_outsb(unsigned long port, const void *addr, unsigned long count)
         volatile __u16 *p = port2adr(port);
         const __u8 *ap = addr;
 
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-                volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); 
-                while (count--)
-                        *bp = *ap++;
-        } else if (shifted_port(port)) {
+        if (shifted_port(port)) {
                 while (count--)
                         *p = *ap++ << 8;
         } else {
@@ -177,6 +145,7 @@ void se_outsw(unsigned long port, const void *addr, unsigned long count)
 {
         volatile __u16 *p = port2adr(port);
         const __u16 *ap = addr;
+
         while (count--)
                 *p = *ap++;
 }
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
index 318bc8a3969c..cf4a5ba12df4 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/se/770x/setup.c
@@ -14,8 +14,6 @@
 #include <asm/smc37c93x.h>
 #include <asm/heartbeat.h>
 
-void init_se_IRQ(void);
-
 /*
  * Configure the Super I/O chip
  */
@@ -73,7 +71,7 @@ static struct resource cf_ide_resources[] = {
         },
         [1] = {
                 .start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-                .end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+                .end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
                 .flags  = IORESOURCE_MEM,
         },
         [2] = {
@@ -115,9 +113,58 @@ static struct platform_device heartbeat_device = {
         .resource       = heartbeat_resources,
 };
 
+/* SH771X Ethernet driver */
+static struct resource sh_eth0_resources[] = {
+        [0] = {
+                .start = SH_ETH0_BASE,
+                .end = SH_ETH0_BASE + 0x1B8,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = SH_ETH0_IRQ,
+                .end = SH_ETH0_IRQ,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device sh_eth0_device = {
+        .name = "sh-eth",
+        .id     = 0,
+        .dev = {
+                .platform_data = PHY_ID,
+        },
+        .num_resources = ARRAY_SIZE(sh_eth0_resources),
+        .resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+        [0] = {
+                .start = SH_ETH1_BASE,
+                .end = SH_ETH1_BASE + 0x1B8,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = SH_ETH1_IRQ,
+                .end = SH_ETH1_IRQ,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device sh_eth1_device = {
+        .name = "sh-eth",
+        .id     = 1,
+        .dev = {
+                .platform_data = PHY_ID,
+        },
+        .num_resources = ARRAY_SIZE(sh_eth1_resources),
+        .resource = sh_eth1_resources,
+};
+
 static struct platform_device *se_devices[] __initdata = {
         &heartbeat_device,
         &cf_ide_device,
+        &sh_eth0_device,
+        &sh_eth1_device,
 };
 
 static int __init se_devices_setup(void)
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index ede3957fc14a..6e228ea59788 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -16,6 +16,7 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 #include <asm/machvec.h>
+#include <asm/clock.h>
 #include <asm/se7722.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
@@ -145,6 +146,8 @@ static struct platform_device *se7722_devices[] __initdata = {
 
 static int __init se7722_devices_setup(void)
 {
+        clk_always_enable("mstp214"); /* KEYSC */
+
         return platform_add_devices(se7722_devices,
                 ARRAY_SIZE(se7722_devices));
 }
@@ -154,11 +157,6 @@ static void __init se7722_setup(char **cmdline_p)
 {
         ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
 
-        ctrl_outl(0x00051001, MSTPCR0);
-        ctrl_outl(0x00000000, MSTPCR1);
-        /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */
-        ctrl_outl(0xffffb7c0, MSTPCR2);
-
         ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
         ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
 
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 89b408620dcb..8b37869a8227 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -40,7 +40,7 @@ KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 KERNEL_ENTRY    := $(shell /bin/bash -c 'printf "0x%08x" \
                      $$[$(CONFIG_PAGE_OFFSET)  + \
                         $(CONFIG_MEMORY_START) + \
-                        $(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
+                        $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32
index c0d25fb1aa60..47685f618ae7 100644
--- a/arch/sh/boot/compressed/Makefile_32
+++ b/arch/sh/boot/compressed/Makefile_32
@@ -35,8 +35,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
         $(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-        $(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+        $(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64
index 912f3e205a0d..658d4f915556 100644
--- a/arch/sh/boot/compressed/Makefile_64
+++ b/arch/sh/boot/compressed/Makefile_64
@@ -37,8 +37,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
         $(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-        $(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+        $(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
index adcea31e663e..f386997e4d9c 100644
--- a/arch/sh/boot/compressed/misc_32.c
+++ b/arch/sh/boot/compressed/misc_32.c
@@ -74,8 +74,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -84,11 +82,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -101,38 +95,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-        void *p;
-
-        if (size <0) error("Malloc error");
-        if (free_mem_ptr == 0) error("Memory error");
-
-        free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
-        p = (void *)free_mem_ptr;
-        free_mem_ptr += size;
-
-        if (free_mem_ptr >= free_mem_end_ptr)
-                error("Out of memory");
-
-        return p;
-}
-
-static void free(void *where)
-{       /* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-        *ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-        free_mem_ptr = (long) *ptr;
-}
-
 #ifdef CONFIG_SH_STANDARD_BIOS
 size_t strlen(const char *s)
 {
diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c
index a006ef89b9dd..2941657e18aa 100644
--- a/arch/sh/boot/compressed/misc_64.c
+++ b/arch/sh/boot/compressed/misc_64.c
@@ -72,8 +72,6 @@ static unsigned outcnt = 0;	/* bytes in output buffer */
 static int fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -82,11 +80,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -99,40 +93,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-        void *p;
-
-        if (size < 0)
-                error("Malloc error\n");
-        if (free_mem_ptr == 0)
-                error("Memory error\n");
-
-        free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
-        p = (void *) free_mem_ptr;
-        free_mem_ptr += size;
-
-        if (free_mem_ptr >= free_mem_end_ptr)
-                error("\nOut of memory\n");
-
-        return p;
-}
-
-static void free(void *where)
-{                               /* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-        *ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-        free_mem_ptr = (long) *ptr;
-}
-
 void puts(const char *s)
 {
 }
diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S
new file mode 100644
index 000000000000..566071926b13
--- /dev/null
+++ b/arch/sh/boot/compressed/piggy.S
@@ -0,0 +1,8 @@
+        .global input_len, input_data
+        .data
+input_len:
+        .long   input_data_end - input_data
+input_data:
+        .incbin "arch/sh/boot/compressed/vmlinux.bin.gz"
+input_data_end:
+        .end
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
deleted file mode 100644
index 1ed9d791f863..000000000000
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,9 +0,0 @@
-SECTIONS
-{
-  .data : { 
-        input_len = .;
-        LONG(input_data_end - input_data) input_data = .; 
-        *(.data) 
-        input_data_end = .; 
-        }
-}
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
new file mode 100644
index 000000000000..5471df53753c
--- /dev/null
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -0,0 +1,947 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Wed Jun  4 17:30:00 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+CONFIG_CPU_SUBTYPE_SH7723=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_AP325RXA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 84c0075e2ad4..7b7273638447 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,40 +1,55 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:46:17 2006
+# Linux kernel version: 2.6.26-rc8
+# Mon Jul  7 13:12:45 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -46,33 +61,41 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -86,62 +109,28 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-CONFIG_SH_7343_SOLUTION_ENGINE=y
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -150,67 +139,88 @@ CONFIG_CPU_SH4AL_DSP=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 CONFIG_CPU_SUBTYPE_SH7343=y
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_32BIT=y
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_SH_FPU is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
 CONFIG_SH_DSP=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7343_SOLUTION_ENGINE=y
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=27000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -225,57 +235,50 @@ CONFIG_SH_PCLK_FREQ=27000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_CF_ENABLER is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -283,22 +286,20 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+# CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -310,29 +311,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -345,10 +335,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -356,9 +342,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -367,36 +364,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -422,13 +415,15 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -445,130 +440,101 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
+# SCSI support type (disk, tape, CD-ROM)
 #
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# I2O device support
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Network device support
+# SCSI Transports
 #
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -576,13 +542,13 @@ CONFIG_SMC91X=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -592,6 +558,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -608,6 +575,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -626,147 +594,102 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
+# CONFIG_I2C is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-
-#
-# Video Capture Adapters
-#
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# Radio Adapters
-#
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_EPSON1355 is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Logo configuration
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -802,85 +725,63 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
-# Open Sound System
+# SUPERH devices
 #
-# CONFIG_SOUND_PRIME is not set
 
 #
-# USB support
+# System on Chip audio support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_SND_SOC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# SoC Audio support for SuperH
 #
 
 #
-# USB Gadget Support
+# ALSA SoC audio for Freescale SOCs
 #
-# CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# SoC Audio for the Texas Instruments OMAP
 #
-# CONFIG_MMC is not set
 
 #
-# LED devices
+# Open Sound System
 #
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -909,7 +810,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -922,40 +822,39 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -963,56 +862,130 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 2dd83af988f0..7be79cd04eb0 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,53 +1,57 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 10:19:02 2007
+# Linux kernel version: 2.6.26-rc6
+# Wed Jun 18 16:36:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,33 +59,41 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -95,57 +107,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_LBOX_RE2 is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -153,10 +125,8 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 CONFIG_CPU_SUBTYPE_SH7712=y
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -165,37 +135,37 @@ CONFIG_CPU_SUBTYPE_SH7712=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -203,21 +173,21 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -230,6 +200,14 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+# CONFIG_SH_AP325RXA is not set
 
 #
 # Timer and clock configuration
@@ -237,6 +215,10 @@ CONFIG_CPU_HAS_SR_RB=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -251,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=66666666
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -267,48 +248,40 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -316,7 +289,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -324,6 +296,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -334,11 +307,10 @@ CONFIG_ASK_IP_FIB_HASH=y
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -355,30 +327,17 @@ CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,15 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -408,6 +359,7 @@ CONFIG_NET_SCH_CBQ=y
 CONFIG_NET_SCH_HTB=y
 CONFIG_NET_SCH_HFSC=y
 CONFIG_NET_SCH_PRIO=y
+# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=y
 CONFIG_NET_SCH_SFQ=y
 CONFIG_NET_SCH_TEQL=y
@@ -415,7 +367,6 @@ CONFIG_NET_SCH_TBF=y
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_SCH_INGRESS=y
 
 #
 # Classification
@@ -429,50 +380,55 @@ CONFIG_NET_CLS_FW=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 
 #
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -485,6 +441,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -510,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -533,44 +489,25 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -578,6 +515,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -599,6 +537,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -606,94 +545,72 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -711,6 +628,7 @@ CONFIG_NETDEVICES=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -728,99 +646,78 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Hardware Monitoring support
+# Sonics Silicon Backplane
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Sound
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -834,40 +731,10 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -877,20 +744,21 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -919,7 +787,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -935,68 +802,67 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1004,21 +870,28 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_SH_KGDB is not set
 
 #
@@ -1026,62 +899,100 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
new file mode 100644
index 000000000000..83f3fe5db3e5
--- /dev/null
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -0,0 +1,1052 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Fri Jun  6 12:20:17 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_SH7763RDP=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
new file mode 100644
index 000000000000..ff72697365d1
--- /dev/null
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -0,0 +1,1388 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Tue Jul 15 21:37:59 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_HIGHLANDER is not set
+CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_SH_MOBILE is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 51b57c0d1a3c..347ee11351ec 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -23,7 +23,8 @@ static struct sysdev_class dma_sysclass = {
 };
 EXPORT_SYMBOL(dma_sysclass);
 
-static ssize_t dma_show_devices(struct sys_device *dev, char *buf)
+static ssize_t dma_show_devices(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         ssize_t len = 0;
         int i;
@@ -57,13 +58,15 @@ static int __init dma_sysclass_init(void)
 }
 postcore_initcall(dma_sysclass_init);
 
-static ssize_t dma_show_dev_id(struct sys_device *dev, char *buf)
+static ssize_t dma_show_dev_id(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         struct dma_channel *channel = to_dma_channel(dev);
         return sprintf(buf, "%s\n", channel->dev_id);
 }
 
 static ssize_t dma_store_dev_id(struct sys_device *dev,
+                                struct sysdev_attribute *attr,
                                 const char *buf, size_t count)
 {
         struct dma_channel *channel = to_dma_channel(dev);
@@ -74,6 +77,7 @@ static ssize_t dma_store_dev_id(struct sys_device *dev,
 static SYSDEV_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
 
 static ssize_t dma_store_config(struct sys_device *dev,
+                                struct sysdev_attribute *attr,
                                 const char *buf, size_t count)
 {
         struct dma_channel *channel = to_dma_channel(dev);
@@ -87,13 +91,15 @@ static ssize_t dma_store_config(struct sys_device *dev,
 
 static SYSDEV_ATTR(config, S_IWUSR, NULL, dma_store_config);
 
-static ssize_t dma_show_mode(struct sys_device *dev, char *buf)
+static ssize_t dma_show_mode(struct sys_device *dev,
+                                struct sysdev_attribute *attr, char *buf)
 {
         struct dma_channel *channel = to_dma_channel(dev);
         return sprintf(buf, "0x%08x\n", channel->mode);
 }
 
 static ssize_t dma_store_mode(struct sys_device *dev,
+                              struct sysdev_attribute *attr,
                               const char *buf, size_t count)
 {
         struct dma_channel *channel = to_dma_channel(dev);
@@ -104,7 +110,8 @@ static ssize_t dma_store_mode(struct sys_device *dev,
 static SYSDEV_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
 
 #define dma_ro_attr(field, fmt)                                         \
-static ssize_t dma_show_##field(struct sys_device *dev, char *buf)      \
+static ssize_t dma_show_##field(struct sys_device *dev,                 \
+                                struct sysdev_attribute *attr, char *buf)\
 {                                                                       \
         struct dma_channel *channel = to_dma_channel(dev);              \
         return sprintf(buf, fmt, channel->field);                       \
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 0718805774e8..847e90894d1b 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
 obj-$(CONFIG_SH_LBOX_RE2)               += ops-lboxre2.o fixups-lboxre2.o
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)   += ops-se7780.o fixups-se7780.o
 obj-$(CONFIG_SH_CAYMAN)                 += ops-cayman.o
+obj-$(CONFIG_SH_SH7785LCR)              += ops-sh7785lcr.o fixups-sh7785lcr.o
diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c
new file mode 100644
index 000000000000..4949e601387a
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c
@@ -0,0 +1,46 @@
+/*
+ * arch/sh/drivers/pci/fixups-sh7785lcr.c
+ *
+ * R0P7785LC0011RL PCI fixups
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on arch/sh/drivers/pci/fixups-r7780rp.c
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int pci_fixup_pcic(void)
+{
+        pci_write_reg(0x000043ff, SH4_PCIINTM);
+        pci_write_reg(0x0000380f, SH4_PCIAINTM);
+
+        pci_write_reg(0xfbb00047, SH7780_PCICMD);
+        pci_write_reg(0x00000000, SH7780_PCIIBAR);
+
+        pci_write_reg(0x00011912, SH7780_PCISVID);
+        pci_write_reg(0x08000000, SH7780_PCICSCR0);
+        pci_write_reg(0x0000001b, SH7780_PCICSAR0);
+        pci_write_reg(0xfd000000, SH7780_PCICSCR1);
+        pci_write_reg(0x0000000f, SH7780_PCICSAR1);
+
+        pci_write_reg(0xfd000000, SH7780_PCIMBR0);
+        pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+        pci_write_reg(0xc0000000, SH7780_PCIMBR2);
+        pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+        /* Set IOBR for windows containing area specified in pci.h */
+        pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
+                      SH7780_PCIIOBR);
+        pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
+
+        return 0;
+}
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index e1284fc69361..f54c291db37b 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -48,6 +49,7 @@ struct pci_channel board_pci_channels[] = {
           &gapspci_mem_resource, 0, 1 },
         { 0, }
 };
+EXPORT_SYMBOL(board_pci_channels);
 
 /*
  * The !gapspci_config_access case really shouldn't happen, ever, unless
diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
new file mode 100644
index 000000000000..b3bd68702059
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-sh7785lcr.c
@@ -0,0 +1,66 @@
+/*
+ * Author:  Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas R0P7785LC0011RL board
+ * Based on arch/sh/drivers/pci/ops-r7780rp.c
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+static char irq_tab[] __initdata = {
+        65, 66, 67, 68,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+        return irq_tab[slot];
+}
+
+static struct resource sh7785_io_resource = {
+        .name   = "SH7785_IO",
+        .start  = SH7780_PCI_IO_BASE,
+        .end    = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+        .flags  = IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+        .name   = "SH7785_mem",
+        .start  = SH7780_PCI_MEMORY_BASE,
+        .end    = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+        .flags  = IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+        { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
+        { NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7785_pci_map = {
+        .window0        = {
+                .base   = SH7780_CS2_BASE_ADDR,
+                .size   = 0x04000000,
+        },
+
+        .window1        = {
+                .base   = SH7780_CS3_BASE_ADDR,
+                .size   = 0x04000000,
+        },
+
+        .flags  = SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+        return sh7780_pcic_init(&sh7785_pci_map);
+}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
index ea404704ace8..cf48b12ee58c 100644
--- a/arch/sh/drivers/pci/pci-auto.c
+++ b/arch/sh/drivers/pci/pci-auto.c
@@ -78,7 +78,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
 }
 
 #define EARLY_PCI_OP(rw, size, type)                                    \
-int early_##rw##_config_##size(struct pci_channel *hose,                \
+static int early_##rw##_config_##size(struct pci_channel *hose,         \
         int top_bus, int bus, int devfn, int offset, type value)        \
 {                                                                       \
         return pci_##rw##_config_##size(                                \
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index f57095a2617c..d3839e609aac 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -135,7 +135,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check and set
  *  the latency timer as it may not be properly set.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 4bbdce36b92b..0e6905fe9fec 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -21,7 +21,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)        += crash_dump.o
 obj-$(CONFIG_PM)                += pm.o
 obj-$(CONFIG_STACKTRACE)        += stacktrace.o
-obj-$(CONFIG_BINFMT_ELF)        += dump_task.o
+obj-$(CONFIG_ELF_CORE)          += dump_task.o
 obj-$(CONFIG_IO_TRAPPED)        += io_trapped.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 01ff4d05aab0..d3d9f3204230 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -157,7 +157,7 @@ static int __init cf_init_se(void)
 }
 #endif
 
-int __init cf_init(void)
+static int __init cf_init(void)
 {
         if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
                 return cf_init_se();
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index b5f1e23ed57c..f5eb56e6bc59 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk)
         }
 }
 
-int __clk_enable(struct clk *clk)
+static int __clk_enable(struct clk *clk)
 {
         /*
          * See if this is the first time we're enabling the clock, some
@@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk)
 
         return 0;
 }
-EXPORT_SYMBOL_GPL(__clk_enable);
 
 int clk_enable(struct clk *clk)
 {
@@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref)
         /* Nothing to do */
 }
 
-void __clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
         int count = kref_put(&clk->kref, clk_kref_release);
 
@@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk)
                         clk->ops->disable(clk);
         }
 }
-EXPORT_SYMBOL_GPL(__clk_disable);
 
 void clk_disable(struct clk *clk)
 {
@@ -310,15 +308,11 @@ static int show_clocks(char *buf, char **start, off_t off,
         list_for_each_entry_reverse(clk, &clock_list, node) {
                 unsigned long rate = clk_get_rate(clk);
 
-                /*
-                 * Don't bother listing dummy clocks with no ancestry
-                 * that only support enable and disable ops.
-                 */
-                if (unlikely(!rate && !clk->parent))
-                        continue;
-
-                p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name,
-                             rate / 1000000, (rate % 1000000) / 10000);
+                p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name,
+                             rate / 1000000, (rate % 1000000) / 10000,
+                             ((clk->flags & CLK_ALWAYS_ENABLED) ||
+                              (atomic_read(&clk->kref.refcount) != 1)) ?
+                             "enabled" : "disabled");
         }
 
         return p - buf;
diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c
index da5dae787888..8c70e201bde0 100644
--- a/arch/sh/kernel/cpu/irq/intc.c
+++ b/arch/sh/kernel/cpu/irq/intc.c
@@ -62,7 +62,7 @@ struct intc_desc_int {
 #endif
 
 static unsigned int intc_prio_level[NR_IRQS]; /* for now */
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned long ack_handle[NR_IRQS];
 #endif
 
@@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq)
         }
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static void intc_mask_ack(unsigned int irq)
 {
         struct intc_desc_int *d = get_intc_desc(irq);
@@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq)
 
         if (handle) {
                 addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
-                ctrl_inb(addr);
-                ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
+                switch (_INTC_FN(handle)) {
+                case REG_FN_MODIFY_BASE + 0:    /* 8bit */
+                        ctrl_inb(addr);
+                        ctrl_outb(0xff ^ set_field(0, 1, handle), addr);
+                        break;
+                case REG_FN_MODIFY_BASE + 1:    /* 16bit */
+                        ctrl_inw(addr);
+                        ctrl_outw(0xffff ^ set_field(0, 1, handle), addr);
+                        break;
+                case REG_FN_MODIFY_BASE + 3:    /* 32bit */
+                        ctrl_inl(addr);
+                        ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr);
+                        break;
+                default:
+                        BUG();
+                        break;
+                }
         }
 }
 #endif
@@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc,
         return 0;
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned int __init intc_ack_data(struct intc_desc *desc,
                                           struct intc_desc_int *d,
                                           intc_enum enum_id)
@@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc,
         /* irq should be disabled by default */
         d->chip.mask(irq);
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
         if (desc->ack_regs)
                 ack_handle[irq] = intc_ack_data(desc, d, enum_id);
 #endif
@@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc)
         d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
         d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
         d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
 #endif
         d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
@@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc)
         d->chip.mask_ack = intc_disable;
         d->chip.set_type = intc_set_sense;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
         if (desc->ack_regs) {
                 for (i = 0; i < desc->nr_ack_regs; i++)
                         k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index 0fc89069d8c7..ee894e5a45e7 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -3,7 +3,7 @@
  *
  * The SH-2 exception entry
  *
- * Copyright (C) 2005,2006 Yoshinori Sato
+ * Copyright (C) 2005-2008 Yoshinori Sato
  * Copyright (C) 2005  AXE,Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -36,43 +36,41 @@ OFF_TRA	=  (16*4+6*4)
 #include <asm/entry-macros.S>
 
 ENTRY(exception_handler)
-        ! already saved r0/r1
+        ! stack
+        ! r0 <- point sp
+        ! r1
+        ! pc
+        ! sr
+        ! r0 = temporary
+        ! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
         mov.l   r2,@-sp
         mov.l   r3,@-sp
-        mov     r0,r1
         cli
         mov.l   $cpu_mode,r2
         mov.l   @r2,r0
         mov.l   @(5*4,r15),r3   ! previous SR
-        shll2   r3              ! set "S" flag
-        rotl    r0              ! T <- "S" flag
-        rotl    r0              ! "S" flag is LSB
-        rotcr   r3              ! T -> r3:b30
-        shlr    r3
-        shlr    r0
-        bt/s    1f
-         mov.l  r3,@(5*4,r15)   ! copy cpu mode to SR
+        or      r0,r3           ! set MD
+        tst     r0,r0
+        bf/s    1f              ! previous mode check
+         mov.l  r3,@(5*4,r15)   ! update SR
         ! switch to kernel mode
-        mov     #1,r0
-        rotr    r0
-        rotr    r0
+        mov.l   __md_bit,r0
         mov.l   r0,@r2          ! enter kernel mode
         mov.l   $current_thread_info,r2
         mov.l   @r2,r2
-        mov     #0x20,r0
+        mov     #(THREAD_SIZE >> 8),r0
         shll8   r0
         add     r2,r0
         mov     r15,r2          ! r2 = user stack top
         mov     r0,r15          ! switch kernel stack
-        add     #-4,r15         ! dummy
         mov.l   r1,@-r15        ! TRA
         sts.l   macl, @-r15
         sts.l   mach, @-r15
         stc.l   gbr, @-r15
-        mov.l   @(4*4,r2),r0
-        mov.l   @(5*4,r2),r1
-        mov.l   r1,@-r15        ! original SR
+        mov.l   @(5*4,r2),r0
+        mov.l   r0,@-r15        ! original SR
         sts.l   pr,@-r15
+        mov.l   @(4*4,r2),r0
         mov.l   r0,@-r15        ! original PC
         mov     r2,r3
         add     #(4+2)*4,r3     ! rewind r0 - r3 + exception frame
@@ -88,14 +86,15 @@ ENTRY(exception_handler)
         mov.l   r6,@-r15
         mov.l   r5,@-r15
         mov.l   r4,@-r15
+        mov     r1,r9           ! save TRA
         mov     r2,r8           ! copy user -> kernel stack
-        mov.l   @r8+,r3
+        mov.l   @(0,r8),r3
         mov.l   r3,@-r15
-        mov.l   @r8+,r2
+        mov.l   @(4,r8),r2
         mov.l   r2,@-r15
-        mov.l   @r8+,r1
+        mov.l   @(12,r8),r1
         mov.l   r1,@-r15
-        mov.l   @r8+,r0
+        mov.l   @(8,r8),r0
         bra     2f
          mov.l  r0,@-r15
 1:
@@ -107,10 +106,11 @@ ENTRY(exception_handler)
         mov.l   r0,@-r15        
         mov.l   @r2+,r0         ! old R2
         mov.l   r0,@-r15        
-        mov.l   @r2+,r0         ! old R1
-        mov.l   r0,@-r15        
-        mov.l   @r2+,r0         ! old R0
+        mov.l   @(4,r2),r0      ! old R1
         mov.l   r0,@-r15        
+        mov.l   @r2,r0          ! old R0
+        mov.l   r0,@-r15
+        add     #8,r2
         mov.l   @r2+,r3         ! old PC
         mov.l   @r2+,r0         ! old SR
         add     #-4,r2          ! exception frame stub (sr)
@@ -135,14 +135,12 @@ ENTRY(exception_handler)
         mov.l   r6,@-r2
         mov.l   r5,@-r2
         mov.l   r4,@-r2
+        mov     r1,r9
         mov.l   @(OFF_R0,r15),r0
         mov.l   @(OFF_R1,r15),r1
         mov.l   @(OFF_R2,r15),r2
         mov.l   @(OFF_R3,r15),r3
 2:
-        mov     #OFF_TRA,r8
-        add     r15,r8
-        mov.l   @r8,r9  
         mov     #64,r8
         cmp/hs  r8,r9
         bt      interrupt_entry ! vec >= 64 is interrupt
@@ -150,26 +148,14 @@ ENTRY(exception_handler)
         cmp/hs  r8,r9
         bt      trap_entry      ! 64 > vec >= 32  is trap
 
-#if defined(CONFIG_SH_FPU)
-        mov     #13,r8
-        cmp/eq  r8,r9
-        bt      10f             ! fpu
-        nop
-#endif
-
         mov.l   4f,r8
         mov     r9,r4
         shll2   r9
         add     r9,r8
-        mov.l   @r8,r8
-        mov     #0,r9
-        cmp/eq  r9,r8
+        mov.l   @r8,r8          ! exception handler address
+        tst     r8,r8
         bf      3f
         mov.l   8f,r8           ! unhandled exception
-#if defined(CONFIG_SH_FPU)
-10:
-        mov.l   9f, r8          ! unhandled exception
-#endif
 3:
         mov.l   5f,r10
         jmp     @r8
@@ -188,10 +174,7 @@ interrupt_entry:
 5:      .long   ret_from_exception
 6:      .long   ret_from_irq
 7:      .long   do_IRQ
-8:      .long   do_exception_error
-#ifdef CONFIG_SH_FPU
-9:      .long   fpu_error_trap_handler
-#endif
+8:      .long   exception_error
 
 trap_entry:
         mov     #0x30,r8
@@ -200,24 +183,9 @@ trap_entry:
         add     #-0x10,r9       ! convert SH2 to SH3/4 ABI
 1:      
         shll2   r9                      ! TRA
-        mov     #OFF_TRA,r8
-        add     r15,r8
-        mov.l   r9,@r8
-        mov     r9,r8
-#ifdef CONFIG_TRACE_IRQFLAGS
-        mov.l   2f, r9
-        jsr     @r9
-         nop
-#endif
-        sti
-        bra     system_call
-         nop
+        bra     system_call     ! jump common systemcall entry
+         mov    r9,r8
         
-        .align  2
-#ifdef CONFIG_TRACE_IRQFLAGS
-2:      .long   trace_hardirqs_on
-#endif
-
 #if defined(CONFIG_SH_STANDARD_BIOS)
         /* Unwind the stack and jmp to the debug entry */
 ENTRY(sh_bios_handler)
@@ -240,7 +208,7 @@ ENTRY(sh_bios_handler)
         mov.l   @r2,r2
         stc     sr,r3
         mov.l   r2,@r0
-        mov.l   r3,@r0
+        mov.l   r3,@(4,r0)
         mov.l   r1,@(8,r0)      
         mov.l   @r15+, r0
         mov.l   @r15+, r1
@@ -272,22 +240,30 @@ ENTRY(address_error_trap_handler)
         mov.l   1f,r0
         jmp     @r0
          mov    #0,r5                           ! writeaccess is unknown
-        .align  2
 
+        .align  2
 1:      .long   do_address_error
 
 restore_all:
-        cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-        mov.l   1f, r0
-        jsr     @r0
-         nop
-#endif
+        stc     sr,r0
+        or      #0xf0,r0
+        ldc     r0,sr                           ! all interrupt block (same BL = 1)
+        ! restore special register
+        ! overlap exception frame
+        mov     r15,r0
+        add     #17*4,r0
+        lds.l   @r0+,pr
+        add     #4,r0
+        ldc.l   @r0+,gbr
+        lds.l   @r0+,mach
+        lds.l   @r0+,macl
         mov     r15,r0
         mov.l   $cpu_mode,r2
         mov     #OFF_SR,r3
         mov.l   @(r0,r3),r1
-        mov.l   r1,@r2
+        mov.l   __md_bit,r3
+        and     r1,r3                           ! copy MD bit
+        mov.l   r3,@r2
         shll2   r1                              ! clear MD bit
         shlr2   r1
         mov.l   @(OFF_SP,r0),r2
@@ -297,12 +273,6 @@ restore_all:
         mov     #OFF_PC,r3
         mov.l   @(r0,r3),r1
         mov.l   r1,@r2                          ! set pc
-        add     #4*16+4,r0
-        lds.l   @r0+,pr
-        add     #4,r0                           ! skip sr
-        ldc.l   @r0+,gbr
-        lds.l   @r0+,mach
-        lds.l   @r0+,macl
         get_current_thread_info r0, r1
         mov.l   $current_thread_info,r1
         mov.l   r0,@r1
@@ -326,9 +296,8 @@ restore_all:
          nop
 
         .align 2
-#ifdef CONFIG_TRACE_IRQFLAGS
-1:     .long   trace_hardirqs_off
-#endif
+__md_bit:
+        .long   0x40000000
 $current_thread_info:
         .long   __current_thread_info
 $cpu_mode:      
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
index 6d285af7846c..85b0bf81fc1d 100644
--- a/arch/sh/kernel/cpu/sh2/ex.S
+++ b/arch/sh/kernel/cpu/sh2/ex.S
@@ -18,16 +18,17 @@
 exception_entry:        
 no      =       0
         .rept   256
-        mov.l   r0,@-sp
-        mov     #no,r0
+        mov.l   r1,@-sp
         bra     exception_trampoline
-        and     #0xff,r0
+        mov     #no,r1
 no      =       no + 1
         .endr
 exception_trampoline:
-        mov.l   r1,@-sp
-        mov.l   $exception_handler,r1
-        jmp     @r1
+        mov.l   r0,@-sp
+        mov.l   $exception_handler,r0
+        extu.b  r1,r1
+        jmp     @r0
+          extu.w        r1,r1
 
         .align  2
 $exception_entry:
@@ -41,6 +42,6 @@ $exception_handler:
 ENTRY(vbr_base)
 vector  =       0
         .rept   256
-        .long   exception_entry + vector * 8
+        .long   exception_entry + vector * 6
 vector  =       vector + 1
         .endr
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index cc530f4d84d6..56e5878e5516 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -96,8 +96,32 @@ static struct platform_device sci_device = {
         },
 };
 
+static struct resource eth_resources[] = {
+        [0] = {
+                .start = 0xfb000000,
+                .end =   0xfb0001c8,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = 85,
+                .end = 85,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device eth_device = {
+        .name = "sh-eth",
+        .id     = -1,
+        .dev = {
+                .platform_data = (void *)1,
+        },
+        .num_resources = ARRAY_SIZE(eth_resources),
+        .resource = eth_resources,
+};
+
 static struct platform_device *sh7619_devices[] __initdata = {
         &sci_device,
+        &eth_device,
 };
 
 static int __init sh7619_devices_setup(void)
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
index 7e2b90cfa7bf..1ab1ecf4c768 100644
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -4,7 +4,7 @@
 
 obj-y   := common.o probe.o opcode_helper.o
 
-common-y        += $(addprefix ../sh2/, ex.o entry.o)
+common-y        += ex.o entry.o
 
 obj-$(CONFIG_SH_FPU)    += fpu.o
 
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
new file mode 100644
index 000000000000..47096dc3d206
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -0,0 +1,249 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/entry.S
+ *
+ * The SH-2A exception entry
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ * Based on arch/sh/kernel/cpu/sh2/entry.S
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/cpu/mmu_context.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/page.h>
+        
+/* Offsets to the stack */
+OFF_R0  =  0            /* Return value. New ABI also arg4 */
+OFF_R1  =  4            /* New ABI: arg5 */
+OFF_R2  =  8            /* New ABI: arg6 */
+OFF_R3  =  12           /* New ABI: syscall_nr */
+OFF_R4  =  16           /* New ABI: arg0 */
+OFF_R5  =  20           /* New ABI: arg1 */
+OFF_R6  =  24           /* New ABI: arg2 */
+OFF_R7  =  28           /* New ABI: arg3 */
+OFF_SP  =  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR  =  (16*4+2*4)
+OFF_TRA =  (16*4+6*4)
+
+#include <asm/entry-macros.S>
+
+ENTRY(exception_handler)
+        ! stack
+        ! r0 <- point sp
+        ! r1
+        ! pc
+        ! sr
+        ! r0 = temporary
+        ! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
+        mov.l   r2,@-sp
+        cli
+        mov.l   $cpu_mode,r2
+        bld.b   #6,@(0,r2)      !previus SR.MD
+        bst.b   #6,@(4*4,r15)   !set cpu mode to SR.MD
+        bt      1f
+        ! switch to kernel mode
+        bset.b  #6,@(0,r2)      !set SR.MD
+        mov.l   $current_thread_info,r2
+        mov.l   @r2,r2
+        mov     #(THREAD_SIZE >> 8),r0
+        shll8   r0
+        add     r2,r0           ! r0 = kernel stack tail
+        mov     r15,r2          ! r2 = user stack top
+        mov     r0,r15          ! switch kernel stack
+        mov.l   r1,@-r15        ! TRA
+        sts.l   macl, @-r15
+        sts.l   mach, @-r15
+        stc.l   gbr, @-r15
+        mov.l   @(4*4,r2),r0
+        mov.l   r0,@-r15        ! original SR
+        sts.l   pr,@-r15
+        mov.l   @(3*4,r2),r0
+        mov.l   r0,@-r15        ! original PC
+        mov     r2,r0
+        add     #(3+2)*4,r0     ! rewind r0 - r3 + exception frame
+        lds     r0,pr           ! pr = original SP
+        movmu.l r3,@-r15        ! save regs
+        mov     r2,r8           ! r8 =  previus stack top
+        mov     r1,r9           ! r9 = interrupt vector
+        ! restore previous stack
+        mov.l   @r8+,r2
+        mov.l   @r8+,r0
+        mov.l   @r8+,r1
+        bra     2f
+         movml.l r2,@-r15
+1:
+        ! in kernel exception
+        mov     r15,r2
+        add     #-((OFF_TRA + 4) - OFF_PC) + 5*4,r15
+        movmu.l r3,@-r15
+        mov     r2,r8           ! r8 = previous stack top
+        mov     r1,r9           ! r9 = interrupt vector
+        ! restore exception frame & regs
+        mov.l   @r8+,r2         ! old R2
+        mov.l   @r8+,r0         ! old R0
+        mov.l   @r8+,r1         ! old R1
+        mov.l   @r8+,r10        ! old PC
+        mov.l   @r8+,r11        ! old SR
+        movml.l r2,@-r15
+        mov.l   r10,@(OFF_PC,r15)
+        mov.l   r11,@(OFF_SR,r15)
+        mov.l   r8,@(OFF_SP,r15)        ! save old sp
+        mov     r15,r8
+        add     #OFF_TRA + 4,r8
+        mov.l   r9,@-r8
+        sts.l   macl,@-r8
+        sts.l   mach,@-r8
+        stc.l   gbr,@-r8
+        add     #-4,r8
+        sts.l   pr,@-r8
+2:
+        ! dispatch exception / interrupt
+        mov     #64,r8
+        cmp/hs  r8,r9
+        bt      interrupt_entry ! vec >= 64 is interrupt
+        mov     #32,r8
+        cmp/hs  r8,r9
+        bt      trap_entry      ! 64 > vec >= 32  is trap
+
+        mov.l   4f,r8
+        mov     r9,r4
+        shll2   r9
+        add     r9,r8
+        mov.l   @r8,r8          ! exception handler address
+        tst     r8,r8
+        bf      3f
+        mov.l   8f,r8           ! unhandled exception
+3:
+        mov.l   5f,r10
+        jmp     @r8
+         lds    r10,pr
+
+interrupt_entry:
+        mov     r9,r4
+        mov     r15,r5
+        mov.l   7f,r8
+        mov.l   6f,r9
+        jmp     @r8
+         lds    r9,pr
+
+        .align  2
+4:      .long   exception_handling_table
+5:      .long   ret_from_exception
+6:      .long   ret_from_irq
+7:      .long   do_IRQ
+8:      .long   exception_error
+
+trap_entry:
+        mov     #0x30,r8
+        cmp/ge  r8,r9           ! vector 0x20-0x2f is systemcall
+        bt      1f
+        add     #-0x10,r9       ! convert SH2 to SH3/4 ABI
+1:      
+        shll2   r9                      ! TRA
+        bra     system_call     ! jump common systemcall entry
+         mov    r9,r8
+        
+#if defined(CONFIG_SH_STANDARD_BIOS)
+        /* Unwind the stack and jmp to the debug entry */
+ENTRY(sh_bios_handler)
+        mov     r15,r0
+        add     #(22-4)*4-4,r0
+        ldc.l   @r0+,gbr
+        lds.l   @r0+,mach
+        lds.l   @r0+,macl
+        mov     r15,r0
+        mov.l   @(OFF_SP,r0),r1
+        mov.l   @(OFF_SR,r2),r3
+        mov.l   r3,@-r1
+        mov.l   @(OFF_SP,r2),r3
+        mov.l   r3,@-r1
+        mov     r15,r0
+        add     #(22-4)*4-8,r0
+        mov.l   1f,r2
+        mov.l   @r2,r2
+        stc     sr,r3
+        mov.l   r2,@r0
+        mov.l   r3,@(4,r0)
+        mov.l   r1,@(8,r0)
+        movml.l @r15+,r14
+        add     #8,r15
+        lds.l   @r15+, pr
+        rte
+         mov.l  @r15+,r15
+        .align  2
+1:      .long   gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+ENTRY(address_error_trap_handler)
+        mov     r15,r4                          ! regs
+        mov.l   @(OFF_PC,r15),r6                ! pc
+        mov.l   1f,r0
+        jmp     @r0
+         mov    #0,r5                           ! writeaccess is unknown
+
+        .align  2
+1:      .long   do_address_error
+
+restore_all:
+        stc     sr,r0
+        or      #0xf0,r0
+        ldc     r0,sr                           ! all interrupt block (same BL = 1)
+        ! restore special register
+        ! overlap exception frame
+        mov     r15,r0
+        add     #17*4,r0
+        lds.l   @r0+,pr
+        add     #4,r0
+        ldc.l   @r0+,gbr
+        lds.l   @r0+,mach
+        lds.l   @r0+,macl
+        mov     r15,r0
+        mov.l   $cpu_mode,r2
+        bld.b   #6,@(OFF_SR,r15)
+        bst.b   #6,@(0,r2)                      ! save CPU mode
+        mov.l   @(OFF_SR,r0),r1
+        shll2   r1
+        shlr2   r1                              ! clear MD bit
+        mov.l   @(OFF_SP,r0),r2
+        add     #-8,r2
+        mov.l   r2,@(OFF_SP,r0)                 ! point exception frame top
+        mov.l   r1,@(4,r2)                      ! set sr
+        mov.l   @(OFF_PC,r0),r1
+        mov.l   r1,@r2                          ! set pc
+        get_current_thread_info r0, r1
+        mov.l   $current_thread_info,r1
+        mov.l   r0,@r1
+        movml.l @r15+,r14
+        mov.l   @r15,r15
+        rte
+         nop
+
+        .align 2
+$current_thread_info:
+        .long   __current_thread_info
+$cpu_mode:      
+        .long   __cpu_mode
+                
+! common exception handler
+#include "../../entry-common.S"
+        
+        .data
+! cpu operation mode 
+! bit30 = MD (compatible SH3/4)
+__cpu_mode:
+        .long   0x40000000
+                
+        .section        .bss
+__current_thread_info:
+        .long   0
+
+ENTRY(exception_handling_table)
+        .space  4*32
diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S
new file mode 100644
index 000000000000..3ead9e63965a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/ex.S
@@ -0,0 +1,72 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/ex.S
+ *
+ * The SH-2A exception vector table
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+
+! exception no 0 to 255
+exception_entry0:
+no      =       0
+        .rept   256
+        mov.l   r1,@-sp
+        bra     exception_trampoline0
+        mov     #no,r1
+no      =       no + 1
+        .endr
+exception_trampoline0:
+        mov.l   r0,@-sp
+        mov.l   1f,r0
+        extu.b  r1,r1
+        jmp     @r0
+          extu.w        r1,r1
+         
+        .align  2
+1:      .long   exception_handler
+
+! exception no 256 to 511
+exception_entry1:
+no      =       0
+        .rept   256
+        mov.l   r1,@-sp
+        bra     exception_trampoline1
+        mov     #no,r1
+no      =       no + 1
+        .endr
+exception_trampoline1:
+        mov.l   r0,@-sp
+        extu.b  r1,r1
+        movi20  #0x100,r0
+        add     r0,r1
+        mov.l   1f,r0
+        jmp     @r0
+          extu.w        r1,r1
+        
+        .align  2
+1:      .long   exception_handler
+
+        !
+! Exception Vector Base
+!
+        .align  2
+ENTRY(vbr_base)
+vector  =       0
+        .rept   256
+        .long   exception_entry0 + vector * 6
+vector  =       vector + 1
+        .endr
+        .rept   256
+        .long   exception_entry1 + vector * 6
+vector  =       vector + 1
+        .endr
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index 11b6d9c6edae..dac429726899 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -4,7 +4,7 @@
  *  The SH-3 and SH-4 exception vector table.
 
  *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- *  Copyright (C) 2003 - 2006  Paul Mundt
+ *  Copyright (C) 2003 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,13 +12,30 @@
  */
 #include <linux/linkage.h>
 
+#if !defined(CONFIG_MMU)
+#define tlb_miss_load                   exception_error
+#define tlb_miss_store                  exception_error
+#define initial_page_write              exception_error
+#define tlb_protection_violation_load   exception_error
+#define tlb_protection_violation_store  exception_error
+#define address_error_load              exception_error
+#define address_error_store             exception_error
+#endif
+
+#if !defined(CONFIG_SH_FPU)
+#define fpu_error_trap_handler          exception_error
+#endif
+
+#if !defined(CONFIG_KGDB_NMI)
+#define kgdb_handle_exception           exception_error
+#endif
+
         .align 2
         .data
 
 ENTRY(exception_handling_table)
         .long   exception_error         /* 000 */
         .long   exception_error
-#if defined(CONFIG_MMU)
         .long   tlb_miss_load           /* 040 */
         .long   tlb_miss_store
         .long   initial_page_write
@@ -26,30 +43,13 @@ ENTRY(exception_handling_table)
         .long   tlb_protection_violation_store
         .long   address_error_load
         .long   address_error_store     /* 100 */
-#else
-        .long   exception_error ! tlb miss load         /* 040 */
-        .long   exception_error ! tlb miss store
-        .long   exception_error ! initial page write
-        .long   exception_error ! tlb prot violation load
-        .long   exception_error ! tlb prot violation store
-        .long   exception_error ! address error load
-        .long   exception_error ! address error store   /* 100 */
-#endif
-#if defined(CONFIG_SH_FPU)
         .long   fpu_error_trap_handler  /* 120 */
-#else
-        .long   exception_error         /* 120 */
-#endif
         .long   exception_error         /* 140 */
         .long   system_call     ! Unconditional Trap     /* 160 */
         .long   exception_error ! reserved_instruction (filled by trap_init) /* 180 */
         .long   exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/
 ENTRY(nmi_slot)
-#if defined (CONFIG_KGDB_NMI)
         .long   kgdb_handle_exception   /* 1C0 */       ! Allow trap to debugger
-#else
-        .long   exception_none  /* 1C0 */       ! Not implemented yet
-#endif
 ENTRY(user_break_point_trap)
         .long   break_point_trap        /* 1E0 */
 
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index be4926969181..2e42572b1b11 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -50,14 +50,18 @@ int __init detect_cpu_and_cache_system(void)
         boot_cpu_data.dcache.ways               = 1;
         boot_cpu_data.dcache.linesz             = L1_CACHE_BYTES;
 
+        /* We don't know the chip cut */
+        boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1;
+
         /*
          * Setup some generic flags we can probe on SH-4A parts
          */
-        if (((pvr >> 24) & 0xff) == 0x10) {
+        if (((pvr >> 16) & 0xff) == 0x10) {
                 if ((cvr & 0x10000000) == 0)
                         boot_cpu_data.flags |= CPU_HAS_DSP;
 
                 boot_cpu_data.flags |= CPU_HAS_LLSC;
+                boot_cpu_data.cut_major = pvr & 0x7f;
         }
 
         /* FPU detection works for everyone */
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index a880e7968750..9381ad8da263 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -21,7 +21,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)      := clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)      := clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)      := clock-sh7785.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343)      := clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343)      := clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)      := clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7723)      := clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)      := clock-sh7722.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
deleted file mode 100644
index 7adc4f16e95a..000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
- *
- * SH7343/SH7722 support for the clock framework
- *
- *  Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * SH7343/SH7722 uses a common set of multipliers and divisors, so this
- * is quite simple..
- */
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1)
-
-static void master_clk_init(struct clk *clk)
-{
-        clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void master_clk_recalc(struct clk *clk)
-{
-        int idx = (ctrl_inl(FRQCR) & 0x000f);
-        clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_master_clk_ops = {
-        .init           = master_clk_init,
-        .recalc         = master_clk_recalc,
-};
-
-static void module_clk_init(struct clk *clk)
-{
-        clk->parent = NULL;
-        clk->rate = CONFIG_SH_PCLK_FREQ;
-}
-
-static struct clk_ops sh7343_module_clk_ops = {
-        .init           = module_clk_init,
-};
-
-static void bus_clk_init(struct clk *clk)
-{
-        clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void bus_clk_recalc(struct clk *clk)
-{
-        int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f;
-        clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_bus_clk_ops = {
-        .init           = bus_clk_init,
-        .recalc         = bus_clk_recalc,
-};
-
-static void cpu_clk_init(struct clk *clk)
-{
-        clk->parent = clk_get(NULL, "module_clk");
-        clk->flags |= CLK_RATE_PROPAGATES;
-        clk_set_rate(clk, clk_get_rate(clk));
-}
-
-static void cpu_clk_recalc(struct clk *clk)
-{
-        int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f;
-        clk->rate = clk->parent->rate * pll_calc() *
-                multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_cpu_clk_ops = {
-        .init           = cpu_clk_init,
-        .recalc         = cpu_clk_recalc,
-};
-
-static struct clk_ops *sh7343_clk_ops[] = {
-        &sh7343_master_clk_ops,
-        &sh7343_module_clk_ops,
-        &sh7343_bus_clk_ops,
-        &sh7343_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-        if (idx < ARRAY_SIZE(sh7343_clk_ops))
-                *ops = sh7343_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 299138ebe160..db913855c2fd 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -1,7 +1,7 @@
 /*
  * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
  *
- * SH7722 & SH7366 support for the clock framework
+ * SH7343, SH7722, SH7723 & SH7366 support for the clock framework
  *
  * Copyright (c) 2006-2007 Nomad Global Solutions Inc
  * Based on code for sh7343 by Paul Mundt
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/errno.h>
+#include <linux/stringify.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
@@ -411,40 +412,40 @@ static struct clk_ops sh7722_frqcr_clk_ops = {
  * clock ops methods for SIU A/B and IrDA clock
  *
  */
-static int sh7722_siu_which(struct clk *clk)
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
+static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
 {
-        if (!strcmp(clk->name, "siu_a_clk"))
-                return 0;
-        if (!strcmp(clk->name, "siu_b_clk"))
-                return 1;
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-        if (!strcmp(clk->name, "irda_clk"))
-                return 2;
-#endif
-        return -EINVAL;
+        unsigned long r;
+        int div;
+
+        r = ctrl_inl(clk->arch_flags);
+        div = sh7722_find_divisors(clk->parent->rate, rate);
+        if (div < 0)
+                return div;
+        r = (r & ~0xF) | div;
+        ctrl_outl(r, clk->arch_flags);
+        return 0;
 }
 
-static unsigned long sh7722_siu_regs[] = {
-        [0] = SCLKACR,
-        [1] = SCLKBCR,
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-        [2] = IrDACLKCR,
-#endif
-};
+static void sh7722_siu_recalc(struct clk *clk)
+{
+        unsigned long r;
+
+        r = ctrl_inl(clk->arch_flags);
+        clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
+}
 
 static int sh7722_siu_start_stop(struct clk *clk, int enable)
 {
-        int siu = sh7722_siu_which(clk);
         unsigned long r;
 
-        if (siu < 0)
-                return siu;
-        BUG_ON(siu > 2);
-        r = ctrl_inl(sh7722_siu_regs[siu]);
+        r = ctrl_inl(clk->arch_flags);
         if (enable)
-                ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]);
+                ctrl_outl(r & ~(1 << 8), clk->arch_flags);
         else
-                ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]);
+                ctrl_outl(r | (1 << 8), clk->arch_flags);
         return 0;
 }
 
@@ -458,6 +459,15 @@ static void sh7722_siu_disable(struct clk *clk)
         sh7722_siu_start_stop(clk, 0);
 }
 
+static struct clk_ops sh7722_siu_clk_ops = {
+        .recalc = sh7722_siu_recalc,
+        .set_rate = sh7722_siu_set_rate,
+        .enable = sh7722_siu_enable,
+        .disable = sh7722_siu_disable,
+};
+
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
+
 static void sh7722_video_enable(struct clk *clk)
 {
         unsigned long r;
@@ -494,43 +504,6 @@ static void sh7722_video_recalc(struct clk *clk)
         clk->rate = clk->parent->rate / ((r & 0x3F) + 1);
 }
 
-static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
-{
-        int siu = sh7722_siu_which(clk);
-        unsigned long r;
-        int div;
-
-        if (siu < 0)
-                return siu;
-        BUG_ON(siu > 2);
-        r = ctrl_inl(sh7722_siu_regs[siu]);
-        div = sh7722_find_divisors(clk->parent->rate, rate);
-        if (div < 0)
-                return div;
-        r = (r & ~0xF) | div;
-        ctrl_outl(r, sh7722_siu_regs[siu]);
-        return 0;
-}
-
-static void sh7722_siu_recalc(struct clk *clk)
-{
-        int siu = sh7722_siu_which(clk);
-        unsigned long r;
-
-        if (siu < 0)
-                return /* siu */ ;
-        BUG_ON(siu > 2);
-        r = ctrl_inl(sh7722_siu_regs[siu]);
-        clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
-}
-
-static struct clk_ops sh7722_siu_clk_ops = {
-        .recalc = sh7722_siu_recalc,
-        .set_rate = sh7722_siu_set_rate,
-        .enable = sh7722_siu_enable,
-        .disable = sh7722_siu_disable,
-};
-
 static struct clk_ops sh7722_video_clk_ops = {
         .recalc = sh7722_video_recalc,
         .set_rate = sh7722_video_set_rate,
@@ -560,6 +533,9 @@ static struct clk sh7722_sdram_clock = {
         .ops = &sh7722_frqcr_clk_ops,
 };
 
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
 /*
  * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
  * methods of clk_ops determine which register they should access by
@@ -567,36 +543,151 @@ static struct clk sh7722_sdram_clock = {
  */
 static struct clk sh7722_siu_a_clock = {
         .name = "siu_a_clk",
+        .arch_flags = SCLKACR,
         .ops = &sh7722_siu_clk_ops,
 };
 
 static struct clk sh7722_siu_b_clock = {
         .name = "siu_b_clk",
+        .arch_flags = SCLKBCR,
         .ops = &sh7722_siu_clk_ops,
 };
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
 static struct clk sh7722_irda_clock = {
         .name = "irda_clk",
+        .arch_flags = IrDACLKCR,
         .ops = &sh7722_siu_clk_ops,
 };
 #endif
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
 
 static struct clk sh7722_video_clock = {
         .name = "video_clk",
         .ops = &sh7722_video_clk_ops,
 };
 
+static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg,
+                                    int enable)
+{
+        unsigned long bit = clk->arch_flags;
+        unsigned long r;
+
+        r = ctrl_inl(reg);
+
+        if (enable)
+                r &= ~(1 << bit);
+        else
+                r |= (1 << bit);
+
+        ctrl_outl(r, reg);
+        return 0;
+}
+
+static void sh7722_mstpcr0_enable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR0, 1);
+}
+
+static void sh7722_mstpcr0_disable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR0, 0);
+}
+
+static void sh7722_mstpcr1_enable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR1, 1);
+}
+
+static void sh7722_mstpcr1_disable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR1, 0);
+}
+
+static void sh7722_mstpcr2_enable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR2, 1);
+}
+
+static void sh7722_mstpcr2_disable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR2, 0);
+}
+
+static struct clk_ops sh7722_mstpcr0_clk_ops = {
+        .enable = sh7722_mstpcr0_enable,
+        .disable = sh7722_mstpcr0_disable,
+};
+
+static struct clk_ops sh7722_mstpcr1_clk_ops = {
+        .enable = sh7722_mstpcr1_enable,
+        .disable = sh7722_mstpcr1_disable,
+};
+
+static struct clk_ops sh7722_mstpcr2_clk_ops = {
+        .enable = sh7722_mstpcr2_enable,
+        .disable = sh7722_mstpcr2_disable,
+};
+
+#define DECLARE_MSTPCRN(regnr, bitnr, bitstr)           \
+{                                                       \
+        .name = "mstp" __stringify(regnr) bitstr,       \
+        .arch_flags = bitnr,                            \
+        .ops = &sh7722_mstpcr ## regnr ## _clk_ops,     \
+}
+
+#define DECLARE_MSTPCR(regnr) \
+        DECLARE_MSTPCRN(regnr, 31, "31"), \
+        DECLARE_MSTPCRN(regnr, 30, "30"), \
+        DECLARE_MSTPCRN(regnr, 29, "29"), \
+        DECLARE_MSTPCRN(regnr, 28, "28"), \
+        DECLARE_MSTPCRN(regnr, 27, "27"), \
+        DECLARE_MSTPCRN(regnr, 26, "26"), \
+        DECLARE_MSTPCRN(regnr, 25, "25"), \
+        DECLARE_MSTPCRN(regnr, 24, "24"), \
+        DECLARE_MSTPCRN(regnr, 23, "23"), \
+        DECLARE_MSTPCRN(regnr, 22, "22"), \
+        DECLARE_MSTPCRN(regnr, 21, "21"), \
+        DECLARE_MSTPCRN(regnr, 20, "20"), \
+        DECLARE_MSTPCRN(regnr, 19, "19"), \
+        DECLARE_MSTPCRN(regnr, 18, "18"), \
+        DECLARE_MSTPCRN(regnr, 17, "17"), \
+        DECLARE_MSTPCRN(regnr, 16, "16"), \
+        DECLARE_MSTPCRN(regnr, 15, "15"), \
+        DECLARE_MSTPCRN(regnr, 14, "14"), \
+        DECLARE_MSTPCRN(regnr, 13, "13"), \
+        DECLARE_MSTPCRN(regnr, 12, "12"), \
+        DECLARE_MSTPCRN(regnr, 11, "11"), \
+        DECLARE_MSTPCRN(regnr, 10, "10"), \
+        DECLARE_MSTPCRN(regnr, 9, "09"), \
+        DECLARE_MSTPCRN(regnr, 8, "08"), \
+        DECLARE_MSTPCRN(regnr, 7, "07"), \
+        DECLARE_MSTPCRN(regnr, 6, "06"), \
+        DECLARE_MSTPCRN(regnr, 5, "05"), \
+        DECLARE_MSTPCRN(regnr, 4, "04"), \
+        DECLARE_MSTPCRN(regnr, 3, "03"), \
+        DECLARE_MSTPCRN(regnr, 2, "02"), \
+        DECLARE_MSTPCRN(regnr, 1, "01"), \
+        DECLARE_MSTPCRN(regnr, 0, "00")
+
+static struct clk sh7722_mstpcr[] = {
+        DECLARE_MSTPCR(0),
+        DECLARE_MSTPCR(1),
+        DECLARE_MSTPCR(2),
+};
+
 static struct clk *sh7722_clocks[] = {
         &sh7722_umem_clock,
         &sh7722_sh_clock,
         &sh7722_peripheral_clock,
         &sh7722_sdram_clock,
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
         &sh7722_siu_a_clock,
         &sh7722_siu_b_clock,
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
         &sh7722_irda_clock,
 #endif
+#endif
         &sh7722_video_clock,
 };
 
@@ -629,5 +720,11 @@ int __init arch_clk_init(void)
                 clk_register(sh7722_clocks[i]);
         }
         clk_put(master);
+
+        for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) {
+                pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name);
+                clk_register(&sh7722_mstpcr[i]);
+        }
+
         return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6d4f50cd4aaf..78881b4214da 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -11,6 +11,104 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic0_resources[] = {
+        [0] = {
+                .name   = "IIC0",
+                .start  = 0x04470000,
+                .end    = 0x04470017,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 96,
+                .end    = 99,
+                .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic0_device = {
+        .name           = "i2c-sh_mobile",
+        .num_resources  = ARRAY_SIZE(iic0_resources),
+        .resource       = iic0_resources,
+};
+
+static struct resource iic1_resources[] = {
+        [0] = {
+                .name   = "IIC1",
+                .start  = 0x04750000,
+                .end    = 0x04750017,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 44,
+                .end    = 47,
+                .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic1_device = {
+        .name           = "i2c-sh_mobile",
+        .num_resources  = ARRAY_SIZE(iic1_resources),
+        .resource       = iic1_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+        .name = "VPU4",
+        .version = "0",
+        .irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+        [0] = {
+                .name   = "VPU",
+                .start  = 0xfe900000,
+                .end    = 0xfe9022eb,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device vpu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 0,
+        .dev = {
+                .platform_data  = &vpu_platform_data,
+        },
+        .resource       = vpu_resources,
+        .num_resources  = ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 54,
+};
+
+static struct resource veu_resources[] = {
+        [0] = {
+                .name   = "VEU",
+                .start  = 0xfe920000,
+                .end    = 0xfe9200b7,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &veu_platform_data,
+        },
+        .resource       = veu_resources,
+        .num_resources  = ARRAY_SIZE(veu_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
         {
@@ -32,16 +130,171 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7343_devices[] __initdata = {
+        &iic0_device,
+        &iic1_device,
         &sci_device,
+        &vpu_device,
+        &veu_device,
 };
 
 static int __init sh7343_devices_setup(void)
 {
+        clk_always_enable("mstp031"); /* TLB */
+        clk_always_enable("mstp030"); /* IC */
+        clk_always_enable("mstp029"); /* OC */
+        clk_always_enable("mstp028"); /* URAM */
+        clk_always_enable("mstp026"); /* XYMEM */
+        clk_always_enable("mstp023"); /* INTC3 */
+        clk_always_enable("mstp022"); /* INTC */
+        clk_always_enable("mstp020"); /* SuperHyway */
+        clk_always_enable("mstp109"); /* I2C0 */
+        clk_always_enable("mstp108"); /* I2C1 */
+        clk_always_enable("mstp202"); /* VEU */
+        clk_always_enable("mstp201"); /* VPU */
+
+        platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+        platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
         return platform_add_devices(sh7343_devices,
                                     ARRAY_SIZE(sh7343_devices));
 }
 __initcall(sh7343_devices_setup);
 
+enum {
+        UNUSED = 0,
+
+        /* interrupt sources */
+        IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+        DMAC0, DMAC1, DMAC2, DMAC3,
+        VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
+        MFI, VPU, TPU, Z3D4, USBI0, USBI1,
+        MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
+        DMAC4, DMAC5, DMAC_DADERR,
+        KEYSC,
+        SCIF, SCIF1, SCIF2, SCIF3, SCIF4,
+        SIOF0, SIOF1, SIO,
+        FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+        I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+        I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+        SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
+        IRDA,
+        SDHI0, SDHI1, SDHI2, SDHI3,
+        CMT, TSIF, SIU,
+        TMU0, TMU1, TMU2,
+        JPU, LCDC,
+
+        /* interrupt groups */
+
+        DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB,
+};
+
+static struct intc_vect vectors[] __initdata = {
+        INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+        INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+        INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+        INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+        INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0),
+        INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0),
+        INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
+        INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
+        INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
+        INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
+        INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980),
+        INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0),
+        INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40),
+        INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20),
+        INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60),
+        INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
+        INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
+        INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20),
+        INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60),
+        INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0),
+        INTC_VECT(SIO, 0xd00),
+        INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
+        INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
+        INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
+        INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
+        INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
+        INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+        INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
+        INTC_VECT(SIU, 0xf80),
+        INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+        INTC_VECT(TMU2, 0x440),
+        INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+        INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
+        INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
+        INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR),
+        INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
+        INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
+                   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+        INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+        INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+        INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
+        INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
+        INTC_GROUP(USB, USBI0, USBI1),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+        { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+          { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
+        { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+          { 0, 0, 0, VPU, 0, 0, 0, MFI } },
+        { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+          { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
+        { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+          { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
+        { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+          { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } },
+        { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+          { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } },
+        { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+          { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+            FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
+        { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+          { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
+        { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+          { 0, 0, 0, CMT, 0, USBI1, USBI0 } },
+        { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+          { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } },
+        { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+          { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } },
+        { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+        { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
+        { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
+        { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
+        { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
+        { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } },
+        { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } },
+        { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } },
+        { 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } },
+        { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
+        { 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } },
+        { 0xa4140010, 0, 32, 4, /* INTPRI00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+        { 0xa414001c, 16, 2, /* ICR1 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+        { 0xa4140024, 0, 8, /* INTREQ00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups,
+                             mask_registers, prio_registers, sense_registers,
+                             ack_registers);
+
 void __init plat_irq_setup(void)
 {
+        register_intc_controller(&intc_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index f26b5cdad0d1..6851dba02f31 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -13,6 +13,112 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic_resources[] = {
+        [0] = {
+                .name   = "IIC",
+                .start  = 0x04470000,
+                .end    = 0x04470017,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 96,
+                .end    = 99,
+                .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+        .name           = "i2c-sh_mobile",
+        .num_resources  = ARRAY_SIZE(iic_resources),
+        .resource       = iic_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+        .name = "VPU5",
+        .version = "0",
+        .irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+        [0] = {
+                .name   = "VPU",
+                .start  = 0xfe900000,
+                .end    = 0xfe902807,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device vpu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 0,
+        .dev = {
+                .platform_data  = &vpu_platform_data,
+        },
+        .resource       = vpu_resources,
+        .num_resources  = ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+        [0] = {
+                .name   = "VEU(1)",
+                .start  = 0xfe920000,
+                .end    = 0xfe9200b7,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu0_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &veu0_platform_data,
+        },
+        .resource       = veu0_resources,
+        .num_resources  = ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+        [0] = {
+                .name   = "VEU(2)",
+                .start  = 0xfe924000,
+                .end    = 0xfe9240b7,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu1_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 2,
+        .dev = {
+                .platform_data  = &veu1_platform_data,
+        },
+        .resource       = veu1_resources,
+        .num_resources  = ARRAY_SIZE(veu1_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
         {
@@ -34,11 +140,32 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7366_devices[] __initdata = {
+        &iic_device,
         &sci_device,
+        &vpu_device,
+        &veu0_device,
+        &veu1_device,
 };
 
 static int __init sh7366_devices_setup(void)
 {
+        clk_always_enable("mstp031"); /* TLB */
+        clk_always_enable("mstp030"); /* IC */
+        clk_always_enable("mstp029"); /* OC */
+        clk_always_enable("mstp028"); /* RSMEM */
+        clk_always_enable("mstp026"); /* XYMEM */
+        clk_always_enable("mstp023"); /* INTC3 */
+        clk_always_enable("mstp022"); /* INTC */
+        clk_always_enable("mstp020"); /* SuperHyway */
+        clk_always_enable("mstp109"); /* I2C */
+        clk_always_enable("mstp207"); /* VEU-2 */
+        clk_always_enable("mstp202"); /* VEU-1 */
+        clk_always_enable("mstp201"); /* VPU */
+
+        platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+        platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+        platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
         return platform_add_devices(sh7366_devices,
                                     ARRAY_SIZE(sh7366_devices));
 }
@@ -97,7 +224,7 @@ static struct intc_vect vectors[] __initdata = {
         INTC_VECT(SIU, 0xf80),
         INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
         INTC_VECT(TMU2, 0x440),
-        INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580),
+        INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580),
 };
 
 static struct intc_group groups[] __initdata = {
@@ -163,8 +290,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
           { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups,
-                         mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+        { 0xa4140024, 0, 8, /* INTREQ00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups,
+                             mask_registers, prio_registers, sense_registers,
+                             ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 62ebccf18b3c..de1ede92176e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -12,6 +12,8 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/mm.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
 static struct resource usbf_resources[] = {
@@ -59,6 +61,62 @@ static struct platform_device iic_device = {
         .resource       = iic_resources,
 };
 
+static struct uio_info vpu_platform_data = {
+        .name = "VPU4",
+        .version = "0",
+        .irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+        [0] = {
+                .name   = "VPU",
+                .start  = 0xfe900000,
+                .end    = 0xfe9022eb,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device vpu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 0,
+        .dev = {
+                .platform_data  = &vpu_platform_data,
+        },
+        .resource       = vpu_resources,
+        .num_resources  = ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 54,
+};
+
+static struct resource veu_resources[] = {
+        [0] = {
+                .name   = "VEU",
+                .start  = 0xfe920000,
+                .end    = 0xfe9200b7,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &veu_platform_data,
+        },
+        .resource       = veu_resources,
+        .num_resources  = ARRAY_SIZE(veu_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
         {
                 .mapbase        = 0xffe00000,
@@ -95,10 +153,27 @@ static struct platform_device *sh7722_devices[] __initdata = {
         &usbf_device,
         &iic_device,
         &sci_device,
+        &vpu_device,
+        &veu_device,
 };
 
 static int __init sh7722_devices_setup(void)
 {
+        clk_always_enable("mstp031"); /* TLB */
+        clk_always_enable("mstp030"); /* IC */
+        clk_always_enable("mstp029"); /* OC */
+        clk_always_enable("mstp028"); /* URAM */
+        clk_always_enable("mstp026"); /* XYMEM */
+        clk_always_enable("mstp022"); /* INTC */
+        clk_always_enable("mstp020"); /* SuperHyway */
+        clk_always_enable("mstp109"); /* I2C */
+        clk_always_enable("mstp211"); /* USB */
+        clk_always_enable("mstp202"); /* VEU */
+        clk_always_enable("mstp201"); /* VPU */
+
+        platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+        platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
         return platform_add_devices(sh7722_devices,
                                     ARRAY_SIZE(sh7722_devices));
 }
@@ -229,8 +304,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
           { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups,
-                         mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+        { 0xa4140024, 0, 8, /* INTREQ00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups,
+                             mask_registers, prio_registers, sense_registers,
+                             ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index a0470f2f5479..cd6baffdc896 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -12,8 +12,94 @@
 #include <linux/serial.h>
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
+static struct uio_info vpu_platform_data = {
+        .name = "VPU5",
+        .version = "0",
+        .irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+        [0] = {
+                .name   = "VPU",
+                .start  = 0xfe900000,
+                .end    = 0xfe902807,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device vpu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 0,
+        .dev = {
+                .platform_data  = &vpu_platform_data,
+        },
+        .resource       = vpu_resources,
+        .num_resources  = ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+        [0] = {
+                .name   = "VEU2H0",
+                .start  = 0xfe920000,
+                .end    = 0xfe92027b,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu0_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &veu0_platform_data,
+        },
+        .resource       = veu0_resources,
+        .num_resources  = ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+        [0] = {
+                .name   = "VEU2H1",
+                .start  = 0xfe924000,
+                .end    = 0xfe92427b,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu1_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 2,
+        .dev = {
+                .platform_data  = &veu1_platform_data,
+        },
+        .resource       = veu1_resources,
+        .num_resources  = ARRAY_SIZE(veu1_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
         {
                 .mapbase        = 0xffe00000,
@@ -113,14 +199,56 @@ static struct platform_device sh7723_usb_host_device = {
         .resource       = sh7723_usb_host_resources,
 };
 
+static struct resource iic_resources[] = {
+        [0] = {
+                .name   = "IIC",
+                .start  = 0x04470000,
+                .end    = 0x04470017,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 96,
+                .end    = 99,
+                .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+        .name           = "i2c-sh_mobile",
+        .num_resources  = ARRAY_SIZE(iic_resources),
+        .resource       = iic_resources,
+};
+
 static struct platform_device *sh7723_devices[] __initdata = {
         &sci_device,
         &rtc_device,
+        &iic_device,
         &sh7723_usb_host_device,
+        &vpu_device,
+        &veu0_device,
+        &veu1_device,
 };
 
 static int __init sh7723_devices_setup(void)
 {
+        clk_always_enable("mstp031"); /* TLB */
+        clk_always_enable("mstp030"); /* IC */
+        clk_always_enable("mstp029"); /* OC */
+        clk_always_enable("mstp024"); /* FPU */
+        clk_always_enable("mstp022"); /* INTC */
+        clk_always_enable("mstp020"); /* SuperHyway */
+        clk_always_enable("mstp000"); /* MERAM */
+        clk_always_enable("mstp109"); /* I2C */
+        clk_always_enable("mstp108"); /* RTC */
+        clk_always_enable("mstp211"); /* USB */
+        clk_always_enable("mstp206"); /* VEU2H1 */
+        clk_always_enable("mstp202"); /* VEU2H0 */
+        clk_always_enable("mstp201"); /* VPU */
+
+        platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+        platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+        platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
         return platform_add_devices(sh7723_devices,
                                     ARRAY_SIZE(sh7723_devices));
 }
@@ -326,8 +454,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
           { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups,
-                         mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+        { 0xa4140024, 0, 8, /* INTREQ00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups,
+                             mask_registers, prio_registers, sense_registers,
+                             ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f189a559462b..3c5b629887a8 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2006  Paul Mundt
  *  Copyright (C) 2007  Yoshihiro Shimoda
+ *  Copyright (C) 2008  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -56,6 +57,11 @@ static struct plat_sci_port sci_platform_data[] = {
                 .type           = PORT_SCIF,
                 .irqs           = { 76, 77, 79, 78 },
         }, {
+                .mapbase        = 0xffe10000,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .type           = PORT_SCIF,
+                .irqs           = { 104, 105, 107, 106 },
+        }, {
                 .flags = 0,
         }
 };
@@ -208,8 +214,8 @@ static struct intc_vect vectors[] __initdata = {
         INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
         INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
         INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
-        INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20),
-        INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60),
+        INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20),
+        INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60),
         INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0),
         INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0),
 };
@@ -290,9 +296,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
                                             IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
-                        NULL, irq_mask_registers, irq_prio_registers,
-                        irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+        { 0xffd00024, 0, 32, /* INTREQ */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors,
+                             NULL, irq_mask_registers, irq_prio_registers,
+                             irq_sense_registers, irq_ack_registers);
 
 
 /* External interrupt pins in IRL mode */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 18dbbe23fea1..fb8200cc7440 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -217,9 +217,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
                                             IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors,
-                         NULL, irq_mask_registers, irq_prio_registers,
-                         irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+        { 0xffd00024, 0, 32, /* INTREQ */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors,
+                             NULL, irq_mask_registers, irq_prio_registers,
+                             irq_sense_registers, irq_ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 621e7329ec63..30baa63b24c8 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -238,13 +238,18 @@ static struct intc_sense_reg sense_registers[] __initdata = {
                                             IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123,
-                         NULL, mask_registers, prio_registers,
-                         sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+        { 0xffd00024, 0, 32, /* INTREQ */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123",
+                             vectors_irq0123, NULL, mask_registers,
+                             prio_registers, sense_registers, ack_registers);
 
-static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567,
-                         NULL, mask_registers, prio_registers,
-                         sense_registers);
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567",
+                             vectors_irq4567, NULL, mask_registers,
+                             prio_registers, sense_registers, ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 718bd2356b34..5e0dd1933847 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -192,7 +192,7 @@ work_resched:
         .align  2
 1:      .long   schedule
 2:      .long   do_notify_resume
-3:      .long   restore_all
+3:      .long   resume_userspace
 #ifdef CONFIG_TRACE_IRQFLAGS
 4:      .long   trace_hardirqs_on
 5:      .long   trace_hardirqs_off
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 5c17de51987e..ec1eadce4aaa 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -70,7 +70,7 @@ static void kexec_info(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 
         unsigned long page_list;
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index b98e37a1f54c..3326a45749d9 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -34,18 +34,6 @@ void (*pm_idle)(void);
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void disable_hlt(void)
-{
-        hlt_counter++;
-}
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-        hlt_counter--;
-}
-EXPORT_SYMBOL(enable_hlt);
-
 static int __init nohlt_setup(char *__unused)
 {
         hlt_counter = 1;
@@ -60,7 +48,7 @@ static int __init hlt_setup(char *__unused)
 }
 __setup("hlt", hlt_setup);
 
-void default_idle(void)
+static void default_idle(void)
 {
         if (!hlt_counter) {
                 clear_thread_flag(TIF_POLLING_NRFLAG);
@@ -86,7 +74,7 @@ void cpu_idle(void)
                 if (!idle)
                         idle = default_idle;
 
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 while (!need_resched())
                         idle();
                 tick_nohz_restart_sched_tick();
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 0283d8133075..b9dbd2d3b4a5 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -36,16 +36,6 @@ static int hlt_counter = 1;
 
 #define HARD_IDLE_TIMEOUT (HZ / 3)
 
-void disable_hlt(void)
-{
-        hlt_counter++;
-}
-
-void enable_hlt(void)
-{
-        hlt_counter--;
-}
-
 static int __init nohlt_setup(char *__unused)
 {
         hlt_counter = 1;
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index fddb547f3c2b..2bc72def5cf8 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -241,6 +241,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
                 break;
         }
 #endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+        case PTRACE_GETFDPIC: {
+                unsigned long tmp = 0;
+
+                switch (addr) {
+                case PTRACE_GETFDPIC_EXEC:
+                        tmp = child->mm->context.exec_fdpic_loadmap;
+                        break;
+                case PTRACE_GETFDPIC_INTERP:
+                        tmp = child->mm->context.interp_fdpic_loadmap;
+                        break;
+                default:
+                        break;
+                }
+
+                ret = 0;
+                if (put_user(tmp, (unsigned long *) data)) {
+                        ret = -EFAULT;
+                        break;
+                }
+                break;
+        }
+#endif
         default:
                 ret = ptrace_request(child, request, addr, data);
                 break;
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index bca2bbc575db..6339d0c95715 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -398,6 +398,7 @@ const char *get_cpu_subtype(struct sh_cpuinfo *c)
 {
         return cpu_name[c->type];
 }
+EXPORT_SYMBOL(get_cpu_subtype);
 
 #ifdef CONFIG_PROC_FS
 /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
@@ -452,6 +453,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
         seq_printf(m, "processor\t: %d\n", cpu);
         seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
         seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
+        if (c->cut_major == -1)
+                seq_printf(m, "cut\t\t: unknown\n");
+        else if (c->cut_minor == -1)
+                seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
+        else
+                seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
 
         show_cpuflags(m, c);
 
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f311551d9a05..4bbbde895a53 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -33,6 +33,11 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+struct fdpic_func_descriptor {
+        unsigned long   text;
+        unsigned long   GOT;
+};
+
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
@@ -368,6 +373,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
                 err |= __put_user(OR_R0_R0, &frame->retcode[6]);
                 err |= __put_user((__NR_sigreturn), &frame->retcode[7]);
                 regs->pr = (unsigned long) frame->retcode;
+                flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
         }
 
         if (err)
@@ -378,18 +384,21 @@ static int setup_frame(int sig, struct k_sigaction *ka,
         regs->regs[4] = signal; /* Arg for signal handler */
         regs->regs[5] = 0;
         regs->regs[6] = (unsigned long) &frame->sc;
-        regs->pc = (unsigned long) ka->sa.sa_handler;
+
+        if (current->personality & FDPIC_FUNCPTRS) {
+                struct fdpic_func_descriptor __user *funcptr =
+                        (struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+                __get_user(regs->pc, &funcptr->text);
+                __get_user(regs->regs[12], &funcptr->GOT);
+        } else
+                regs->pc = (unsigned long)ka->sa.sa_handler;
 
         set_fs(USER_DS);
 
         pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
                  current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-        flush_cache_sigtramp(regs->pr);
-
-        if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-                flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
-
         return 0;
 
 give_sigsegv:
@@ -458,17 +467,22 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
         regs->regs[4] = signal; /* Arg for signal handler */
         regs->regs[5] = (unsigned long) &frame->info;
         regs->regs[6] = (unsigned long) &frame->uc;
-        regs->pc = (unsigned long) ka->sa.sa_handler;
+
+        if (current->personality & FDPIC_FUNCPTRS) {
+                struct fdpic_func_descriptor __user *funcptr =
+                        (struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+                __get_user(regs->pc, &funcptr->text);
+                __get_user(regs->regs[12], &funcptr->GOT);
+        } else
+                regs->pc = (unsigned long)ka->sa.sa_handler;
 
         set_fs(USER_DS);
 
         pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
                  current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-        flush_cache_sigtramp(regs->pr);
-
-        if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-                flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
+        flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 
         return 0;
 
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 1b2ae35c4a76..54d1f61aa007 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -12,6 +12,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 #include <asm/ptrace.h>
 
 /*
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
index 125e493ead82..f0aa5c398656 100644
--- a/arch/sh/kernel/sys_sh32.c
+++ b/arch/sh/kernel/sys_sh32.c
@@ -29,7 +29,7 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
         int fd[2];
         int error;
 
-        error = do_pipe(fd);
+        error = do_pipe_flags(fd, 0);
         if (!error) {
                 regs->regs[1] = fd[1];
                 return fd[0];
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index a46cc3a41148..0af693e65764 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -343,3 +343,9 @@ ENTRY(sys_call_table)
         .long sys_fallocate
         .long sys_timerfd_settime       /* 325 */
         .long sys_timerfd_gettime
+        .long sys_signalfd4
+        .long sys_eventfd2
+        .long sys_epoll_create1
+        .long sys_dup3                  /* 330 */
+        .long sys_pipe2
+        .long sys_inotify_init1
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index d5d7843aad94..0b436aa3cad7 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -381,3 +381,9 @@ sys_call_table:
         .long sys_fallocate
         .long sys_timerfd_settime
         .long sys_timerfd_gettime
+        .long sys_signalfd4             /* 355 */
+        .long sys_eventfd2
+        .long sys_epoll_create1
+        .long sys_dup3
+        .long sys_pipe2
+        .long sys_inotify_init1         /* 360 */
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 7281342c044d..0758b5ee8180 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -211,7 +211,7 @@ unsigned long sh_hpt_frequency = 0;
 
 #define NSEC_PER_CYC_SHIFT      10
 
-struct clocksource clocksource_sh = {
+static struct clocksource clocksource_sh = {
         .name           = "SuperH",
         .rating         = 200,
         .mask           = CLOCKSOURCE_MASK(32),
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 8935570008d2..1ca9ad49b541 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -209,7 +209,7 @@ static int tmu_timer_init(void)
         return 0;
 }
 
-struct sys_timer_ops tmu_timer_ops = {
+static struct sys_timer_ops tmu_timer_ops = {
         .init           = tmu_timer_init,
         .start          = tmu_timer_start,
         .stop           = tmu_timer_stop,
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index e08b3bfeb656..511a9426cec5 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -43,6 +43,7 @@
 # define TRAP_ILLEGAL_SLOT_INST 6
 # define TRAP_ADDRESS_ERROR     9
 # ifdef CONFIG_CPU_SH2A
+#  define TRAP_FPU_ERROR        13
 #  define TRAP_DIVZERO_ERROR    17
 #  define TRAP_DIVOVF_ERROR     18
 # endif
@@ -851,6 +852,9 @@ void __init trap_init(void)
 #ifdef CONFIG_CPU_SH2A
         set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
         set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
+#ifdef CONFIG_SH_FPU
+        set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler);
+#endif
 #endif
 
         /* Setup VBR for boot cpu */
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index ebb55d1149f5..8596cc78e18d 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -2,9 +2,11 @@
 # Makefile for SuperH-specific library files..
 #
 
-lib-y  = delay.o io.o memset.o memmove.o memchr.o \
+lib-y  = delay.o memset.o memmove.o memchr.o \
          checksum.o strlen.o div64.o div64-generic.o
 
+obj-y                           += io.o
+
 memcpy-y                        := memcpy.o
 memcpy-$(CONFIG_CPU_SH4)        := memcpy-sh4.o
 
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 5fd218430b19..56d0a7daa34b 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -145,25 +145,39 @@ choice
 
 config PAGE_SIZE_4KB
         bool "4kB"
-        depends on !X2TLB
+        depends on !MMU || !X2TLB
         help
           This is the default page size used by all SuperH CPUs.
 
 config PAGE_SIZE_8KB
         bool "8kB"
-        depends on X2TLB
+        depends on !MMU || X2TLB
         help
           This enables 8kB pages as supported by SH-X2 and later MMUs.
 
+config PAGE_SIZE_16KB
+        bool "16kB"
+        depends on !MMU
+        help
+          This enables 16kB pages on MMU-less SH systems.
+
 config PAGE_SIZE_64KB
         bool "64kB"
-        depends on CPU_SH4 || CPU_SH5
+        depends on !MMU || CPU_SH4 || CPU_SH5
         help
           This enables support for 64kB pages, possible on all SH-4
           CPUs and later.
 
 endchoice
 
+config ENTRY_OFFSET
+        hex
+        default "0x00001000" if PAGE_SIZE_4KB
+        default "0x00002000" if PAGE_SIZE_8KB
+        default "0x00004000" if PAGE_SIZE_16KB
+        default "0x00010000" if PAGE_SIZE_64KB
+        default "0x00000000"
+
 choice
         prompt "HugeTLB page size"
         depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index c5b56d52b7d2..0e189ccd4a77 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -120,7 +120,7 @@ static const struct file_operations cache_debugfs_fops = {
         .open           = cache_debugfs_open,
         .read           = seq_read,
         .llseek         = seq_lseek,
-        .release        = seq_release,
+        .release        = single_release,
 };
 
 static int __init cache_debugfs_init(void)
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 43d7ff6b6ec7..1fdc8d90254a 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -4,6 +4,7 @@
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
  * Copyright (C) 2001 - 2007  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
+ * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -22,6 +23,7 @@
  * entirety.
  */
 #define MAX_DCACHE_PAGES        64      /* XXX: Tune for ways */
+#define MAX_ICACHE_PAGES        32
 
 static void __flush_dcache_segment_1way(unsigned long start,
                                         unsigned long extent);
@@ -178,42 +180,45 @@ void __flush_invalidate_region(void *start, int size)
 /*
  * Write back the range of D-cache, and purge the I-cache.
  *
- * Called from kernel/module.c:sys_init_module and routine for a.out format.
+ * Called from kernel/module.c:sys_init_module and routine for a.out format,
+ * signal handler code and kprobes code
  */
 void flush_icache_range(unsigned long start, unsigned long end)
 {
-        flush_cache_all();
-}
-
-/*
- * Write back the D-cache and purge the I-cache for signal trampoline.
- * .. which happens to be the same behavior as flush_icache_range().
- * So, we simply flush out a line.
- */
-void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr)
-{
-        unsigned long v, index;
-        unsigned long flags;
+        int icacheaddr;
+        unsigned long flags, v;
         int i;
 
-        v = addr & ~(L1_CACHE_BYTES-1);
-        asm volatile("ocbwb     %0"
-                     : /* no output */
-                     : "m" (__m(v)));
-
-        index = CACHE_IC_ADDRESS_ARRAY |
-                        (v & boot_cpu_data.icache.entry_mask);
-
-        local_irq_save(flags);
-        jump_to_uncached();
-
-        for (i = 0; i < boot_cpu_data.icache.ways;
-             i++, index += boot_cpu_data.icache.way_incr)
-                ctrl_outl(0, index);    /* Clear out Valid-bit */
-
-        back_to_cached();
-        wmb();
-        local_irq_restore(flags);
+       /* If there are too many pages then just blow the caches */
+        if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+                flush_cache_all();
+       } else {
+               /* selectively flush d-cache then invalidate the i-cache */
+               /* this is inefficient, so only use for small ranges */
+               start &= ~(L1_CACHE_BYTES-1);
+               end += L1_CACHE_BYTES-1;
+               end &= ~(L1_CACHE_BYTES-1);
+
+               local_irq_save(flags);
+               jump_to_uncached();
+
+               for (v = start; v < end; v+=L1_CACHE_BYTES) {
+                       asm volatile("ocbwb     %0"
+                                    : /* no output */
+                                    : "m" (__m(v)));
+
+                       icacheaddr = CACHE_IC_ADDRESS_ARRAY | (
+                                       v & cpu_data->icache.entry_mask);
+
+                       for (i = 0; i < cpu_data->icache.ways;
+                               i++, icacheaddr += cpu_data->icache.way_incr)
+                                       /* Clear i-cache line valid-bit */
+                                       ctrl_outl(0, icacheaddr);
+               }
+
+                back_to_cached();
+                local_irq_restore(flags);
+        }
 }
 
 static inline void flush_cache_4096(unsigned long start,
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 3095d9581475..b2ce014401b5 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -10,6 +10,7 @@
  * for more details.
  */
 #include <linux/mm.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
 #include <asm/addrspace.h>
@@ -93,3 +94,32 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
         }
 }
 EXPORT_SYMBOL(dma_cache_sync);
+
+int platform_resource_setup_memory(struct platform_device *pdev,
+                                   char *name, unsigned long memsize)
+{
+        struct resource *r;
+        dma_addr_t dma_handle;
+        void *buf;
+
+        r = pdev->resource + pdev->num_resources - 1;
+        if (r->flags) {
+                pr_warning("%s: unable to find empty space for resource\n",
+                        name);
+                return -EINVAL;
+        }
+
+        buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
+        if (!buf) {
+                pr_warning("%s: unable to allocate memory\n", name);
+                return -ENOMEM;
+        }
+
+        memset(buf, 0, memsize);
+
+        r->flags = IORESOURCE_MEM;
+        r->start = dma_handle;
+        r->end = r->start + memsize - 1;
+        r->name = name;
+        return 0;
+}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index d1fa27594c6e..0c776fdfbdda 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -37,16 +37,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
         int fault;
         siginfo_t info;
 
-        trace_hardirqs_on();
-        local_irq_enable();
-
 #ifdef CONFIG_SH_KGDB
         if (kgdb_nofault && kgdb_bus_err_hook)
                 kgdb_bus_err_hook();
 #endif
 
         tsk = current;
-        mm = tsk->mm;
         si_code = SEGV_MAPERR;
 
         if (unlikely(address >= TASK_SIZE)) {
@@ -88,6 +84,14 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
                 return;
         }
 
+        /* Only enable interrupts if they were on before the fault */
+        if ((regs->sr & SR_IMASK) != SR_IMASK) {
+                trace_hardirqs_on();
+                local_irq_enable();
+        }
+
+        mm = tsk->mm;
+
         /*
          * If we're in an interrupt or have no user
          * context, we must not take the fault..
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index ae8c321d6e2a..9304117039c4 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -22,7 +22,8 @@
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+                        unsigned long addr, unsigned long sz)
 {
         pgd_t *pgd;
         pud_t *pud;
@@ -78,6 +79,11 @@ int pmd_huge(pmd_t pmd)
         return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+        return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
                              pmd_t *pmd, int write)
 {
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index d7df26bd1e54..b75a7acd62fb 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -25,47 +25,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD];
 unsigned long cached_to_uncached = 0;
 
-void show_mem(void)
-{
-        int total = 0, reserved = 0, free = 0;
-        int shared = 0, cached = 0, slab = 0;
-        pg_data_t *pgdat;
-
-        printk("Mem-info:\n");
-        show_free_areas();
-
-        for_each_online_pgdat(pgdat) {
-                unsigned long flags, i;
-
-                pgdat_resize_lock(pgdat, &flags);
-                for (i = 0; i < pgdat->node_spanned_pages; i++) {
-                        struct page *page = pgdat_page_nr(pgdat, i);
-                        total++;
-                        if (PageReserved(page))
-                                reserved++;
-                        else if (PageSwapCache(page))
-                                cached++;
-                        else if (PageSlab(page))
-                                slab++;
-                        else if (!page_count(page))
-                                free++;
-                        else
-                                shared += page_count(page) - 1;
-                }
-                pgdat_resize_unlock(pgdat, &flags);
-        }
-
-        printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-        printk("%d pages of RAM\n", total);
-        printk("%d free pages\n", free);
-        printk("%d reserved pages\n", reserved);
-        printk("%d slab pages\n", slab);
-        printk("%d pages shared\n", shared);
-        printk("%d pages swap cached\n", cached);
-        printk(KERN_INFO "Total of %ld pages in page table cache\n",
-               quicklist_total_size());
-}
-
 #ifdef CONFIG_MMU
 static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 {
@@ -191,7 +150,7 @@ void __init paging_init(void)
                 pg_data_t *pgdat = NODE_DATA(nid);
                 unsigned long low, start_pfn;
 
-                start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT;
+                start_pfn = pgdat->bdata->node_min_pfn;
                 low = pgdat->bdata->node_low_pfn;
 
                 if (max_zone_pfns[ZONE_NORMAL] < low)
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 1663199ce888..095d93bec7cd 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -14,7 +14,6 @@
 #include <linux/pfn.h>
 #include <asm/sections.h>
 
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL_GPL(node_data);
 
@@ -35,7 +34,7 @@ void __init setup_memory(void)
         NODE_DATA(0) = pfn_to_kaddr(free_pfn);
         memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
         free_pfn += PFN_UP(sizeof(struct pglist_data));
-        NODE_DATA(0)->bdata = &plat_node_bdata[0];
+        NODE_DATA(0)->bdata = &bootmem_node_data[0];
 
         /* Set up node 0 */
         setup_bootmem_allocator(free_pfn);
@@ -66,7 +65,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
         free_pfn += PFN_UP(sizeof(struct pglist_data));
         memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-        NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+        NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
         NODE_DATA(nid)->node_start_pfn = start_pfn;
         NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index 8c7a9ca79879..38870e0fc182 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -111,7 +111,7 @@ EXPORT_SYMBOL(copy_user_highpage);
 /*
  * For SH-4, we have our own implementation for ptep_get_and_clear
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
         pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
index 7f885b7f8aff..eaf25147194c 100644
--- a/arch/sh/mm/pg-sh7705.c
+++ b/arch/sh/mm/pg-sh7705.c
@@ -118,7 +118,7 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg
  * For SH7705, we have our own implementation for ptep_get_and_clear
  * Copied from pg-sh4.c
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
         pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 0b0ec6e04753..cef727669c87 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -293,7 +293,7 @@ void pmb_unmap(unsigned long addr)
         } while (pmbe);
 }
 
-static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb)
+static void pmb_cache_ctor(void *pmb)
 {
         struct pmb_entry *pmbe = pmb;
 
@@ -385,7 +385,7 @@ static const struct file_operations pmb_debugfs_fops = {
         .open           = pmb_debugfs_open,
         .read           = seq_read,
         .llseek         = seq_lseek,
-        .release        = seq_release,
+        .release        = single_release,
 };
 
 static int __init pmb_debugfs_init(void)
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 1bba7d36be90..0a11cc08f0a5 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -46,3 +46,7 @@ R2D_1			RTS7751R2D_1
 CAYMAN                  SH_CAYMAN
 SDK7780                 SH_SDK7780
 MIGOR                   SH_MIGOR
+RSK7203                 SH_RSK7203
+AP325RXA                SH_AP325RXA
+SH7763RDP               SH_SH7763RDP
+SH7785LCR               SH_SH7785LCR
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 789724e61e83..a214002114ed 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -68,6 +68,7 @@ config SPARC
         select HAVE_IDE
         select HAVE_OPROFILE
         select HAVE_ARCH_KGDB if !SMP
+        select HAVE_ARCH_TRACEHOOK
 
 # Identify this as a Sparc32 build
 config SPARC32
@@ -298,20 +299,6 @@ config UNIX98_PTYS
           Read the instructions in <file:Documentation/Changes> pertaining to
           pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-        int "Maximum number of Unix98 PTYs in use (0-2048)"
-        depends on UNIX98_PTYS
-        default "256"
-        help
-          The maximum number of Unix98 PTYs that can be used at any one time.
-          The default is 256, and should be enough for desktop systems. Server
-          machines which support incoming telnet/rlogin/ssh connections and/or
-          serve several X terminals may want to increase this: every incoming
-          connection and every xterm uses up one PTY.
-
-          When not in use, each additional set of 256 PTYs occupy
-          approximately 8 KB of kernel memory on 32-bit architectures.
-
 endmenu
 
 source "fs/Kconfig"
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index fef28e267a52..6668e6037af6 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -18,6 +18,7 @@ CHECKFLAGS	+= -D__sparc__
 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
 KBUILD_AFLAGS += -m32
+CPPFLAGS_vmlinux.lds += -m32
 
 #LDFLAGS_vmlinux = -N -Ttext 0xf0004000
 #  Since 2.5.40, the first stage is left not btfix-ed.
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
new file mode 100644
index 000000000000..a5f0ce734ff7
--- /dev/null
+++ b/arch/sparc/include/asm/Kbuild
@@ -0,0 +1,45 @@
+# User exported sparc header files
+include include/asm-generic/Kbuild.asm
+
+header-y += ipcbuf_32.h
+header-y += ipcbuf_64.h
+header-y += posix_types_32.h
+header-y += posix_types_64.h
+header-y += ptrace_32.h
+header-y += ptrace_64.h
+header-y += sigcontext_32.h
+header-y += sigcontext_64.h
+header-y += siginfo_32.h
+header-y += siginfo_64.h
+header-y += signal_32.h
+header-y += signal_64.h
+header-y += stat_32.h
+header-y += stat_64.h
+header-y += statfs_32.h
+header-y += statfs_64.h
+header-y += unistd_32.h
+header-y += unistd_64.h
+
+header-y += apc.h
+header-y += asi.h
+header-y += bpp.h
+header-y += display7seg.h
+header-y += envctrl.h
+header-y += fbio.h
+header-y += jsflash.h
+header-y += openprom.h
+header-y += openprom_32.h
+header-y += openprom_64.h
+header-y += openpromio.h
+header-y += perfctr.h
+header-y += psrcompat.h
+header-y += psr.h
+header-y += pstate.h
+header-y += reg.h
+header-y += reg_32.h
+header-y += reg_64.h
+header-y += traps.h
+header-y += uctx.h
+header-y += utrap.h
+header-y += vfc_ioctls.h
+header-y += watchdog.h
diff --git a/arch/sparc/include/asm/agp.h b/arch/sparc/include/asm/agp.h
new file mode 100644
index 000000000000..c2456870b05c
--- /dev/null
+++ b/arch/sparc/include/asm/agp.h
@@ -0,0 +1,20 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+/* dummy for now */
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_cache() mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)         \
+        ((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)   \
+        free_pages((unsigned long)(table), (order))
+
+#endif
diff --git a/arch/sparc/include/asm/apb.h b/arch/sparc/include/asm/apb.h
new file mode 100644
index 000000000000..8f3b57db810f
--- /dev/null
+++ b/arch/sparc/include/asm/apb.h
@@ -0,0 +1,36 @@
+/*
+ * apb.h: Advanced PCI Bridge Configuration Registers and Bits
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC64_APB_H
+#define _SPARC64_APB_H
+
+#define APB_TICK_REGISTER                       0xb0
+#define APB_INT_ACK                             0xb8
+#define APB_PRIMARY_MASTER_RETRY_LIMIT          0xc0
+#define APB_DMA_ASFR                            0xc8
+#define APB_DMA_AFAR                            0xd0
+#define APB_PIO_TARGET_RETRY_LIMIT              0xd8
+#define APB_PIO_TARGET_LATENCY_TIMER            0xd9
+#define APB_DMA_TARGET_RETRY_LIMIT              0xda
+#define APB_DMA_TARGET_LATENCY_TIMER            0xdb
+#define APB_SECONDARY_MASTER_RETRY_LIMIT        0xdc
+#define APB_SECONDARY_CONTROL                   0xdd
+#define APB_IO_ADDRESS_MAP                      0xde
+#define APB_MEM_ADDRESS_MAP                     0xdf
+
+#define APB_PCI_CONTROL_LOW                     0xe0
+#  define APB_PCI_CTL_LOW_ARB_PARK                      (1 << 21)
+#  define APB_PCI_CTL_LOW_ERRINT_EN                     (1 << 8)
+
+#define APB_PCI_CONTROL_HIGH                    0xe4
+#  define APB_PCI_CTL_HIGH_SERR                         (1 << 2)
+#  define APB_PCI_CTL_HIGH_ARBITER_EN                   (1 << 0)
+
+#define APB_PIO_ASFR                            0xe8
+#define APB_PIO_AFAR                            0xf0
+#define APB_DIAG_REGISTER                       0xf8
+
+#endif /* !(_SPARC64_APB_H) */
diff --git a/arch/sparc/include/asm/apc.h b/arch/sparc/include/asm/apc.h
new file mode 100644
index 000000000000..24e9a7d4d97e
--- /dev/null
+++ b/arch/sparc/include/asm/apc.h
@@ -0,0 +1,64 @@
+/* apc - Driver definitions for power management functions
+ * of Aurora Personality Chip (APC) on SPARCstation-4/5 and 
+ * derivatives
+ *
+ * Copyright (c) 2001 Eric Brower (ebrower@usa.net)
+ *
+ */
+
+#ifndef _SPARC_APC_H
+#define _SPARC_APC_H
+
+#include <linux/ioctl.h>
+
+#define APC_IOC 'A'
+
+#define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int)  /* Get fan speed        */
+#define APCIOCSFANCTL _IOW(APC_IOC, 0x01, int)  /* Set fan speed        */
+
+#define APCIOCGCPWR   _IOR(APC_IOC, 0x02, int)  /* Get CPOWER state     */
+#define APCIOCSCPWR   _IOW(APC_IOC, 0x03, int)  /* Set CPOWER state     */
+
+#define APCIOCGBPORT   _IOR(APC_IOC, 0x04, int) /* Get BPORT state      */
+#define APCIOCSBPORT   _IOW(APC_IOC, 0x05, int) /* Set BPORT state      */
+
+/*
+ * Register offsets
+ */
+#define APC_IDLE_REG    0x00
+#define APC_FANCTL_REG  0x20
+#define APC_CPOWER_REG  0x24
+#define APC_BPORT_REG   0x30
+
+#define APC_REGMASK             0x01
+#define APC_BPMASK              0x03
+
+/*
+ * IDLE - CPU standby values (set to initiate standby)
+ */
+#define APC_IDLE_ON             0x01
+
+/*
+ * FANCTL - Fan speed control state values
+ */
+#define APC_FANCTL_HI   0x00    /* Fan speed high       */
+#define APC_FANCTL_LO   0x01    /* Fan speed low        */
+
+/*
+ * CPWR - Convenience power outlet state values 
+ */
+#define APC_CPOWER_ON   0x00    /* Conv power on        */
+#define APC_CPOWER_OFF  0x01    /* Conv power off       */
+
+/*
+ * BPA/BPB - Read-Write "Bit Ports" state values (reset to 0 at power-on)
+ *
+ * WARNING: Internal usage of bit ports is platform dependent--
+ * don't modify BPORT settings unless you know what you are doing.
+ * 
+ * On SS5 BPA seems to toggle onboard ethernet loopback... -E
+ */
+#define APC_BPORT_A             0x01    /* Bit Port A           */
+#define APC_BPORT_B             0x02    /* Bit Port B           */
+
+#endif /* !(_SPARC_APC_H) */
diff --git a/arch/sparc/include/asm/asi.h b/arch/sparc/include/asm/asi.h
new file mode 100644
index 000000000000..74703c5ef985
--- /dev/null
+++ b/arch/sparc/include/asm/asi.h
@@ -0,0 +1,262 @@
+#ifndef _SPARC_ASI_H
+#define _SPARC_ASI_H
+
+/* asi.h:  Address Space Identifier values for the sparc.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au)
+ * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su>
+ */
+
+/* The first batch are for the sun4c. */
+
+#define ASI_NULL1           0x00
+#define ASI_NULL2           0x01
+
+/* sun4c and sun4 control registers and mmu/vac ops */
+#define ASI_CONTROL         0x02
+#define ASI_SEGMAP          0x03
+#define ASI_PTE             0x04
+#define ASI_HWFLUSHSEG      0x05
+#define ASI_HWFLUSHPAGE     0x06
+#define ASI_REGMAP          0x06
+#define ASI_HWFLUSHCONTEXT  0x07
+
+#define ASI_USERTXT         0x08
+#define ASI_KERNELTXT       0x09
+#define ASI_USERDATA        0x0a
+#define ASI_KERNELDATA      0x0b
+
+/* VAC Cache flushing on sun4c and sun4 */
+#define ASI_FLUSHSEG        0x0c
+#define ASI_FLUSHPG         0x0d
+#define ASI_FLUSHCTX        0x0e
+
+/* SPARCstation-5: only 6 bits are decoded. */
+/* wo = Write Only, rw = Read Write;        */
+/* ss = Single Size, as = All Sizes;        */
+#define ASI_M_RES00         0x00   /* Don't touch... */
+#define ASI_M_UNA01         0x01   /* Same here... */
+#define ASI_M_MXCC          0x02   /* Access to TI VIKING MXCC registers */
+#define ASI_M_FLUSH_PROBE   0x03   /* Reference MMU Flush/Probe; rw, ss */
+#define ASI_M_MMUREGS       0x04   /* MMU Registers; rw, ss */
+#define ASI_M_TLBDIAG       0x05   /* MMU TLB only Diagnostics */
+#define ASI_M_DIAGS         0x06   /* Reference MMU Diagnostics */
+#define ASI_M_IODIAG        0x07   /* MMU I/O TLB only Diagnostics */
+#define ASI_M_USERTXT       0x08   /* Same as ASI_USERTXT; rw, as */
+#define ASI_M_KERNELTXT     0x09   /* Same as ASI_KERNELTXT; rw, as */
+#define ASI_M_USERDATA      0x0A   /* Same as ASI_USERDATA; rw, as */
+#define ASI_M_KERNELDATA    0x0B   /* Same as ASI_KERNELDATA; rw, as */
+#define ASI_M_TXTC_TAG      0x0C   /* Instruction Cache Tag; rw, ss */
+#define ASI_M_TXTC_DATA     0x0D   /* Instruction Cache Data; rw, ss */
+#define ASI_M_DATAC_TAG     0x0E   /* Data Cache Tag; rw, ss */
+#define ASI_M_DATAC_DATA    0x0F   /* Data Cache Data; rw, ss */
+
+/* The following cache flushing ASIs work only with the 'sta'
+ * instruction. Results are unpredictable for 'swap' and 'ldstuba',
+ * so don't do it.
+ */
+
+/* These ASI flushes affect external caches too. */
+#define ASI_M_FLUSH_PAGE    0x10   /* Flush I&D Cache Line (page); wo, ss */
+#define ASI_M_FLUSH_SEG     0x11   /* Flush I&D Cache Line (seg); wo, ss */
+#define ASI_M_FLUSH_REGION  0x12   /* Flush I&D Cache Line (region); wo, ss */
+#define ASI_M_FLUSH_CTX     0x13   /* Flush I&D Cache Line (context); wo, ss */
+#define ASI_M_FLUSH_USER    0x14   /* Flush I&D Cache Line (user); wo, ss */
+
+/* Block-copy operations are available only on certain V8 cpus. */
+#define ASI_M_BCOPY         0x17   /* Block copy */
+
+/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */
+#define ASI_M_IFLUSH_PAGE   0x18   /* Flush I Cache Line (page); wo, ss */
+#define ASI_M_IFLUSH_SEG    0x19   /* Flush I Cache Line (seg); wo, ss */
+#define ASI_M_IFLUSH_REGION 0x1A   /* Flush I Cache Line (region); wo, ss */
+#define ASI_M_IFLUSH_CTX    0x1B   /* Flush I Cache Line (context); wo, ss */
+#define ASI_M_IFLUSH_USER   0x1C   /* Flush I Cache Line (user); wo, ss */
+
+/* Block-fill operations are available on certain V8 cpus */
+#define ASI_M_BFILL         0x1F
+
+/* This allows direct access to main memory, actually 0x20 to 0x2f are
+ * the available ASI's for physical ram pass-through, but I don't have
+ * any idea what the other ones do....
+ */
+
+#define ASI_M_BYPASS       0x20   /* Reference MMU bypass; rw, as */
+#define ASI_M_FBMEM        0x29   /* Graphics card frame buffer access */
+#define ASI_M_VMEUS        0x2A   /* VME user 16-bit access */
+#define ASI_M_VMEPS        0x2B   /* VME priv 16-bit access */
+#define ASI_M_VMEUT        0x2C   /* VME user 32-bit access */
+#define ASI_M_VMEPT        0x2D   /* VME priv 32-bit access */
+#define ASI_M_SBUS         0x2E   /* Direct SBus access */
+#define ASI_M_CTL          0x2F   /* Control Space (ECC and MXCC are here) */
+
+
+/* This is ROSS HyperSparc only. */
+#define ASI_M_FLUSH_IWHOLE 0x31   /* Flush entire ICACHE; wo, ss */
+
+/* Tsunami/Viking/TurboSparc i/d cache flash clear. */
+#define ASI_M_IC_FLCLEAR   0x36
+#define ASI_M_DC_FLCLEAR   0x37
+
+#define ASI_M_DCDR         0x39   /* Data Cache Diagnostics Register rw, ss */
+
+#define ASI_M_VIKING_TMP1  0x40   /* Emulation temporary 1 on Viking */
+/* only available on SuperSparc I */
+/* #define ASI_M_VIKING_TMP2  0x41 */  /* Emulation temporary 2 on Viking */
+
+#define ASI_M_ACTION       0x4c   /* Breakpoint Action Register (GNU/Viking) */
+
+/* V9 Architecture mandary ASIs. */
+#define ASI_N                   0x04 /* Nucleus                         */
+#define ASI_NL                  0x0c /* Nucleus, little endian          */
+#define ASI_AIUP                0x10 /* Primary, user                   */
+#define ASI_AIUS                0x11 /* Secondary, user                 */
+#define ASI_AIUPL               0x18 /* Primary, user, little endian    */
+#define ASI_AIUSL               0x19 /* Secondary, user, little endian  */
+#define ASI_P                   0x80 /* Primary, implicit               */
+#define ASI_S                   0x81 /* Secondary, implicit             */
+#define ASI_PNF                 0x82 /* Primary, no fault               */
+#define ASI_SNF                 0x83 /* Secondary, no fault             */
+#define ASI_PL                  0x88 /* Primary, implicit, l-endian     */
+#define ASI_SL                  0x89 /* Secondary, implicit, l-endian   */
+#define ASI_PNFL                0x8a /* Primary, no fault, l-endian     */
+#define ASI_SNFL                0x8b /* Secondary, no fault, l-endian   */
+
+/* SpitFire and later extended ASIs.  The "(III)" marker designates
+ * UltraSparc-III and later specific ASIs.  The "(CMT)" marker designates
+ * Chip Multi Threading specific ASIs.  "(NG)" designates Niagara specific
+ * ASIs, "(4V)" designates SUN4V specific ASIs.
+ */
+#define ASI_PHYS_USE_EC         0x14 /* PADDR, E-cachable               */
+#define ASI_PHYS_BYPASS_EC_E    0x15 /* PADDR, E-bit                    */
+#define ASI_BLK_AIUP_4V         0x16 /* (4V) Prim, user, block ld/st    */
+#define ASI_BLK_AIUS_4V         0x17 /* (4V) Sec, user, block ld/st     */
+#define ASI_PHYS_USE_EC_L       0x1c /* PADDR, E-cachable, little endian*/
+#define ASI_PHYS_BYPASS_EC_E_L  0x1d /* PADDR, E-bit, little endian     */
+#define ASI_BLK_AIUP_L_4V       0x1e /* (4V) Prim, user, block, l-endian*/
+#define ASI_BLK_AIUS_L_4V       0x1f /* (4V) Sec, user, block, l-endian */
+#define ASI_SCRATCHPAD          0x20 /* (4V) Scratch Pad Registers      */
+#define ASI_MMU                 0x21 /* (4V) MMU Context Registers      */
+#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23 /* (NG) init-store, twin load,
+                                         * secondary, user
+                                         */
+#define ASI_NUCLEUS_QUAD_LDD    0x24 /* Cachable, qword load            */
+#define ASI_QUEUE               0x25 /* (4V) Interrupt Queue Registers  */
+#define ASI_QUAD_LDD_PHYS_4V    0x26 /* (4V) Physical, qword load       */
+#define ASI_NUCLEUS_QUAD_LDD_L  0x2c /* Cachable, qword load, l-endian  */
+#define ASI_QUAD_LDD_PHYS_L_4V  0x2e /* (4V) Phys, qword load, l-endian */
+#define ASI_PCACHE_DATA_STATUS  0x30 /* (III) PCache data stat RAM diag */
+#define ASI_PCACHE_DATA         0x31 /* (III) PCache data RAM diag      */
+#define ASI_PCACHE_TAG          0x32 /* (III) PCache tag RAM diag       */
+#define ASI_PCACHE_SNOOP_TAG    0x33 /* (III) PCache snoop tag RAM diag */
+#define ASI_QUAD_LDD_PHYS       0x34 /* (III+) PADDR, qword load        */
+#define ASI_WCACHE_VALID_BITS   0x38 /* (III) WCache Valid Bits diag    */
+#define ASI_WCACHE_DATA         0x39 /* (III) WCache data RAM diag      */
+#define ASI_WCACHE_TAG          0x3a /* (III) WCache tag RAM diag       */
+#define ASI_WCACHE_SNOOP_TAG    0x3b /* (III) WCache snoop tag RAM diag */
+#define ASI_QUAD_LDD_PHYS_L     0x3c /* (III+) PADDR, qw-load, l-endian */
+#define ASI_SRAM_FAST_INIT      0x40 /* (III+) Fast SRAM init           */
+#define ASI_CORE_AVAILABLE      0x41 /* (CMT) LP Available              */
+#define ASI_CORE_ENABLE_STAT    0x41 /* (CMT) LP Enable Status          */
+#define ASI_CORE_ENABLE         0x41 /* (CMT) LP Enable RW              */
+#define ASI_XIR_STEERING        0x41 /* (CMT) XIR Steering RW           */
+#define ASI_CORE_RUNNING_RW     0x41 /* (CMT) LP Running RW             */
+#define ASI_CORE_RUNNING_W1S    0x41 /* (CMT) LP Running Write-One Set  */
+#define ASI_CORE_RUNNING_W1C    0x41 /* (CMT) LP Running Write-One Clr  */
+#define ASI_CORE_RUNNING_STAT   0x41 /* (CMT) LP Running Status         */
+#define ASI_CMT_ERROR_STEERING  0x41 /* (CMT) Error Steering RW         */
+#define ASI_DCACHE_INVALIDATE   0x42 /* (III) DCache Invalidate diag    */
+#define ASI_DCACHE_UTAG         0x43 /* (III) DCache uTag diag          */
+#define ASI_DCACHE_SNOOP_TAG    0x44 /* (III) DCache snoop tag RAM diag */
+#define ASI_LSU_CONTROL         0x45 /* Load-store control unit         */
+#define ASI_DCU_CONTROL_REG     0x45 /* (III) DCache Unit Control reg   */
+#define ASI_DCACHE_DATA         0x46 /* DCache data-ram diag access     */
+#define ASI_DCACHE_TAG          0x47 /* Dcache tag/valid ram diag access*/
+#define ASI_INTR_DISPATCH_STAT  0x48 /* IRQ vector dispatch status      */
+#define ASI_INTR_RECEIVE        0x49 /* IRQ vector receive status       */
+#define ASI_UPA_CONFIG          0x4a /* UPA config space                */
+#define ASI_JBUS_CONFIG         0x4a /* (IIIi) JBUS Config Register     */
+#define ASI_SAFARI_CONFIG       0x4a /* (III) Safari Config Register    */
+#define ASI_SAFARI_ADDRESS      0x4a /* (III) Safari Address Register   */
+#define ASI_ESTATE_ERROR_EN     0x4b /* E-cache error enable space      */
+#define ASI_AFSR                0x4c /* Async fault status register     */
+#define ASI_AFAR                0x4d /* Async fault address register    */
+#define ASI_EC_TAG_DATA         0x4e /* E-cache tag/valid ram diag acc  */
+#define ASI_IMMU                0x50 /* Insn-MMU main register space    */
+#define ASI_IMMU_TSB_8KB_PTR    0x51 /* Insn-MMU 8KB TSB pointer reg    */
+#define ASI_IMMU_TSB_64KB_PTR   0x52 /* Insn-MMU 64KB TSB pointer reg   */
+#define ASI_ITLB_DATA_IN        0x54 /* Insn-MMU TLB data in reg        */
+#define ASI_ITLB_DATA_ACCESS    0x55 /* Insn-MMU TLB data access reg    */
+#define ASI_ITLB_TAG_READ       0x56 /* Insn-MMU TLB tag read reg       */
+#define ASI_IMMU_DEMAP          0x57 /* Insn-MMU TLB demap              */
+#define ASI_DMMU                0x58 /* Data-MMU main register space    */
+#define ASI_DMMU_TSB_8KB_PTR    0x59 /* Data-MMU 8KB TSB pointer reg    */
+#define ASI_DMMU_TSB_64KB_PTR   0x5a /* Data-MMU 16KB TSB pointer reg   */
+#define ASI_DMMU_TSB_DIRECT_PTR 0x5b /* Data-MMU TSB direct pointer reg */
+#define ASI_DTLB_DATA_IN        0x5c /* Data-MMU TLB data in reg        */
+#define ASI_DTLB_DATA_ACCESS    0x5d /* Data-MMU TLB data access reg    */
+#define ASI_DTLB_TAG_READ       0x5e /* Data-MMU TLB tag read reg       */
+#define ASI_DMMU_DEMAP          0x5f /* Data-MMU TLB demap              */
+#define ASI_IIU_INST_TRAP       0x60 /* (III) Instruction Breakpoint    */
+#define ASI_INTR_ID             0x63 /* (CMT) Interrupt ID register     */
+#define ASI_CORE_ID             0x63 /* (CMT) LP ID register            */
+#define ASI_CESR_ID             0x63 /* (CMT) CESR ID register          */
+#define ASI_IC_INSTR            0x66 /* Insn cache instrucion ram diag  */
+#define ASI_IC_TAG              0x67 /* Insn cache tag/valid ram diag   */
+#define ASI_IC_STAG             0x68 /* (III) Insn cache snoop tag ram  */
+#define ASI_IC_PRE_DECODE       0x6e /* Insn cache pre-decode ram diag  */
+#define ASI_IC_NEXT_FIELD       0x6f /* Insn cache next-field ram diag  */
+#define ASI_BRPRED_ARRAY        0x6f /* (III) Branch Prediction RAM diag*/
+#define ASI_BLK_AIUP            0x70 /* Primary, user, block load/store */
+#define ASI_BLK_AIUS            0x71 /* Secondary, user, block ld/st    */
+#define ASI_MCU_CTRL_REG        0x72 /* (III) Memory controller regs    */
+#define ASI_EC_DATA             0x74 /* (III) E-cache data staging reg  */
+#define ASI_EC_CTRL             0x75 /* (III) E-cache control reg       */
+#define ASI_EC_W                0x76 /* E-cache diag write access       */
+#define ASI_UDB_ERROR_W         0x77 /* External UDB error regs W       */
+#define ASI_UDB_CONTROL_W       0x77 /* External UDB control regs W     */
+#define ASI_INTR_W              0x77 /* IRQ vector dispatch write       */
+#define ASI_INTR_DATAN_W        0x77 /* (III) Out irq vector data reg N */
+#define ASI_INTR_DISPATCH_W     0x77 /* (III) Interrupt vector dispatch */
+#define ASI_BLK_AIUPL           0x78 /* Primary, user, little, blk ld/st*/
+#define ASI_BLK_AIUSL           0x79 /* Secondary, user, little, blk ld/st*/
+#define ASI_EC_R                0x7e /* E-cache diag read access        */
+#define ASI_UDBH_ERROR_R        0x7f /* External UDB error regs rd hi   */
+#define ASI_UDBL_ERROR_R        0x7f /* External UDB error regs rd low  */
+#define ASI_UDBH_CONTROL_R      0x7f /* External UDB control regs rd hi */
+#define ASI_UDBL_CONTROL_R      0x7f /* External UDB control regs rd low*/
+#define ASI_INTR_R              0x7f /* IRQ vector dispatch read        */
+#define ASI_INTR_DATAN_R        0x7f /* (III) In irq vector data reg N  */
+#define ASI_PST8_P              0xc0 /* Primary, 8 8-bit, partial       */
+#define ASI_PST8_S              0xc1 /* Secondary, 8 8-bit, partial     */
+#define ASI_PST16_P             0xc2 /* Primary, 4 16-bit, partial      */
+#define ASI_PST16_S             0xc3 /* Secondary, 4 16-bit, partial    */
+#define ASI_PST32_P             0xc4 /* Primary, 2 32-bit, partial      */
+#define ASI_PST32_S             0xc5 /* Secondary, 2 32-bit, partial    */
+#define ASI_PST8_PL             0xc8 /* Primary, 8 8-bit, partial, L    */
+#define ASI_PST8_SL             0xc9 /* Secondary, 8 8-bit, partial, L  */
+#define ASI_PST16_PL            0xca /* Primary, 4 16-bit, partial, L   */
+#define ASI_PST16_SL            0xcb /* Secondary, 4 16-bit, partial, L */
+#define ASI_PST32_PL            0xcc /* Primary, 2 32-bit, partial, L   */
+#define ASI_PST32_SL            0xcd /* Secondary, 2 32-bit, partial, L */
+#define ASI_FL8_P               0xd0 /* Primary, 1 8-bit, fpu ld/st     */
+#define ASI_FL8_S               0xd1 /* Secondary, 1 8-bit, fpu ld/st   */
+#define ASI_FL16_P              0xd2 /* Primary, 1 16-bit, fpu ld/st    */
+#define ASI_FL16_S              0xd3 /* Secondary, 1 16-bit, fpu ld/st  */
+#define ASI_FL8_PL              0xd8 /* Primary, 1 8-bit, fpu ld/st, L  */
+#define ASI_FL8_SL              0xd9 /* Secondary, 1 8-bit, fpu ld/st, L*/
+#define ASI_FL16_PL             0xda /* Primary, 1 16-bit, fpu ld/st, L */
+#define ASI_FL16_SL             0xdb /* Secondary, 1 16-bit, fpu ld/st,L*/
+#define ASI_BLK_COMMIT_P        0xe0 /* Primary, blk store commit       */
+#define ASI_BLK_COMMIT_S        0xe1 /* Secondary, blk store commit     */
+#define ASI_BLK_INIT_QUAD_LDD_P 0xe2 /* (NG) init-store, twin load,
+                                      * primary, implicit
+                                      */
+#define ASI_BLK_P               0xf0 /* Primary, blk ld/st              */
+#define ASI_BLK_S               0xf1 /* Secondary, blk ld/st            */
+#define ASI_BLK_PL              0xf8 /* Primary, blk ld/st, little      */
+#define ASI_BLK_SL              0xf9 /* Secondary, blk ld/st, little    */
+
+#endif /* _SPARC_ASI_H */
diff --git a/arch/sparc/include/asm/asmmacro.h b/arch/sparc/include/asm/asmmacro.h
new file mode 100644
index 000000000000..a619a4d97aae
--- /dev/null
+++ b/arch/sparc/include/asm/asmmacro.h
@@ -0,0 +1,45 @@
+/* asmmacro.h: Assembler macros.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu)
+ */
+
+#ifndef _SPARC_ASMMACRO_H
+#define _SPARC_ASMMACRO_H
+
+#include <asm/btfixup.h>
+#include <asm/asi.h>
+
+#define GET_PROCESSOR4M_ID(reg) \
+        rd      %tbr, %reg; \
+        srl     %reg, 12, %reg; \
+        and     %reg, 3, %reg;
+
+#define GET_PROCESSOR4D_ID(reg) \
+        lda     [%g0] ASI_M_VIKING_TMP1, %reg;
+
+/* All trap entry points _must_ begin with this macro or else you
+ * lose.  It makes sure the kernel has a proper window so that
+ * c-code can be called.
+ */
+#define SAVE_ALL_HEAD \
+        sethi   %hi(trap_setup), %l4; \
+        jmpl    %l4 + %lo(trap_setup), %l6;
+#define SAVE_ALL \
+        SAVE_ALL_HEAD \
+         nop;
+
+/* All traps low-level code here must end with this macro. */
+#define RESTORE_ALL b ret_trap_entry; clr %l6;
+
+/* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+
+   likes byte accesses. These are to avoid ifdef mania. */
+
+#ifdef CONFIG_SUN4
+#define lduXa   lduha
+#define stXa    stha
+#else
+#define lduXa   lduba
+#define stXa    stba
+#endif
+
+#endif /* !(_SPARC_ASMMACRO_H) */
diff --git a/arch/sparc/include/asm/atomic.h b/arch/sparc/include/asm/atomic.h
new file mode 100644
index 000000000000..8ff83d8cc33f
--- /dev/null
+++ b/arch/sparc/include/asm/atomic.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ATOMIC_H
+#define ___ASM_SPARC_ATOMIC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/atomic_64.h>
+#else
+#include <asm/atomic_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
new file mode 100644
index 000000000000..5c944b5a8040
--- /dev/null
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -0,0 +1,165 @@
+/* atomic.h: These still suck, but the I-cache hit rate is higher.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au)
+ * Copyright (C) 2007 Kyle McMartin (kyle@parisc-linux.org)
+ *
+ * Additions by Keith M Wesolowski (wesolows@foobazco.org) based
+ * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>.
+ */
+
+#ifndef __ARCH_SPARC_ATOMIC__
+#define __ARCH_SPARC_ATOMIC__
+
+#include <linux/types.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#ifdef __KERNEL__
+
+#define ATOMIC_INIT(i)  { (i) }
+
+extern int __atomic_add_return(int, atomic_t *);
+extern int atomic_cmpxchg(atomic_t *, int, int);
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+extern int atomic_add_unless(atomic_t *, int, int);
+extern void atomic_set(atomic_t *, int);
+
+#define atomic_read(v)          ((v)->counter)
+
+#define atomic_add(i, v)        ((void)__atomic_add_return( (int)(i), (v)))
+#define atomic_sub(i, v)        ((void)__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc(v)           ((void)__atomic_add_return(        1, (v)))
+#define atomic_dec(v)           ((void)__atomic_add_return(       -1, (v)))
+
+#define atomic_add_return(i, v) (__atomic_add_return( (int)(i), (v)))
+#define atomic_sub_return(i, v) (__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc_return(v)    (__atomic_add_return(        1, (v)))
+#define atomic_dec_return(v)    (__atomic_add_return(       -1, (v)))
+
+#define atomic_add_negative(a, v)       (atomic_add_return((a), (v)) < 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/* This is the old 24-bit implementation.  It's still used internally
+ * by some sparc-specific code, notably the semaphore implementation.
+ */
+typedef struct { volatile int counter; } atomic24_t;
+
+#ifndef CONFIG_SMP
+
+#define ATOMIC24_INIT(i)  { (i) }
+#define atomic24_read(v)          ((v)->counter)
+#define atomic24_set(v, i)        (((v)->counter) = i)
+
+#else
+/* We do the bulk of the actual work out of line in two common
+ * routines in assembler, see arch/sparc/lib/atomic.S for the
+ * "fun" details.
+ *
+ * For SMP the trick is you embed the spin lock byte within
+ * the word, use the low byte so signedness is easily retained
+ * via a quick arithmetic shift.  It looks like this:
+ *
+ *      ----------------------------------------
+ *      | signed 24-bit counter value |  lock  |  atomic_t
+ *      ----------------------------------------
+ *       31                          8 7      0
+ */
+
+#define ATOMIC24_INIT(i)        { ((i) << 8) }
+
+static inline int atomic24_read(const atomic24_t *v)
+{
+        int ret = v->counter;
+
+        while(ret & 0xff)
+                ret = v->counter;
+
+        return ret >> 8;
+}
+
+#define atomic24_set(v, i)      (((v)->counter) = ((i) << 8))
+#endif
+
+static inline int __atomic24_add(int i, atomic24_t *v)
+{
+        register volatile int *ptr asm("g1");
+        register int increment asm("g2");
+        register int tmp1 asm("g3");
+        register int tmp2 asm("g4");
+        register int tmp3 asm("g7");
+
+        ptr = &v->counter;
+        increment = i;
+
+        __asm__ __volatile__(
+        "mov    %%o7, %%g4\n\t"
+        "call   ___atomic24_add\n\t"
+        " add   %%o7, 8, %%o7\n"
+        : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+        : "0" (increment), "r" (ptr)
+        : "memory", "cc");
+
+        return increment;
+}
+
+static inline int __atomic24_sub(int i, atomic24_t *v)
+{
+        register volatile int *ptr asm("g1");
+        register int increment asm("g2");
+        register int tmp1 asm("g3");
+        register int tmp2 asm("g4");
+        register int tmp3 asm("g7");
+
+        ptr = &v->counter;
+        increment = i;
+
+        __asm__ __volatile__(
+        "mov    %%o7, %%g4\n\t"
+        "call   ___atomic24_sub\n\t"
+        " add   %%o7, 8, %%o7\n"
+        : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+        : "0" (increment), "r" (ptr)
+        : "memory", "cc");
+
+        return increment;
+}
+
+#define atomic24_add(i, v) ((void)__atomic24_add((i), (v)))
+#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v)))
+
+#define atomic24_dec_return(v) __atomic24_sub(1, (v))
+#define atomic24_inc_return(v) __atomic24_add(1, (v))
+
+#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0)
+#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0)
+
+#define atomic24_inc(v) ((void)__atomic24_add(1, (v)))
+#define atomic24_dec(v) ((void)__atomic24_sub(1, (v)))
+
+#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0)
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()     barrier()
+#define smp_mb__after_atomic_dec()      barrier()
+#define smp_mb__before_atomic_inc()     barrier()
+#define smp_mb__after_atomic_inc()      barrier()
+
+#endif /* !(__KERNEL__) */
+
+#include <asm-generic/atomic.h>
+#endif /* !(__ARCH_SPARC_ATOMIC__) */
diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
new file mode 100644
index 000000000000..2c71ec4a3b18
--- /dev/null
+++ b/arch/sparc/include/asm/atomic_64.h
@@ -0,0 +1,128 @@
+/* atomic.h: Thankfully the V9 is at least reasonable for this
+ *           stuff.
+ *
+ * Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __ARCH_SPARC64_ATOMIC__
+#define __ARCH_SPARC64_ATOMIC__
+
+#include <linux/types.h>
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)          { (i) }
+#define ATOMIC64_INIT(i)        { (i) }
+
+#define atomic_read(v)          ((v)->counter)
+#define atomic64_read(v)        ((v)->counter)
+
+#define atomic_set(v, i)        (((v)->counter) = i)
+#define atomic64_set(v, i)      (((v)->counter) = i)
+
+extern void atomic_add(int, atomic_t *);
+extern void atomic64_add(int, atomic64_t *);
+extern void atomic_sub(int, atomic_t *);
+extern void atomic64_sub(int, atomic64_t *);
+
+extern int atomic_add_ret(int, atomic_t *);
+extern int atomic64_add_ret(int, atomic64_t *);
+extern int atomic_sub_ret(int, atomic_t *);
+extern int atomic64_sub_ret(int, atomic64_t *);
+
+#define atomic_dec_return(v) atomic_sub_ret(1, v)
+#define atomic64_dec_return(v) atomic64_sub_ret(1, v)
+
+#define atomic_inc_return(v) atomic_add_ret(1, v)
+#define atomic64_inc_return(v) atomic64_add_ret(1, v)
+
+#define atomic_sub_return(i, v) atomic_sub_ret(i, v)
+#define atomic64_sub_return(i, v) atomic64_sub_ret(i, v)
+
+#define atomic_add_return(i, v) atomic_add_ret(i, v)
+#define atomic64_add_return(i, v) atomic64_add_ret(i, v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i, v) (atomic_sub_ret(i, v) == 0)
+#define atomic64_sub_and_test(i, v) (atomic64_sub_ret(i, v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_sub_ret(1, v) == 0)
+#define atomic64_dec_and_test(v) (atomic64_sub_ret(1, v) == 0)
+
+#define atomic_inc(v) atomic_add(1, v)
+#define atomic64_inc(v) atomic64_add(1, v)
+
+#define atomic_dec(v) atomic_sub(1, v)
+#define atomic64_dec(v) atomic64_sub(1, v)
+
+#define atomic_add_negative(i, v) (atomic_add_ret(i, v) < 0)
+#define atomic64_add_negative(i, v) (atomic64_add_ret(i, v) < 0)
+
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+        int c, old;
+        c = atomic_read(v);
+        for (;;) {
+                if (unlikely(c == (u)))
+                        break;
+                old = atomic_cmpxchg((v), c, c + (a));
+                if (likely(old == c))
+                        break;
+                c = old;
+        }
+        return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic64_cmpxchg(v, o, n) \
+        ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+        long c, old;
+        c = atomic64_read(v);
+        for (;;) {
+                if (unlikely(c == (u)))
+                        break;
+                old = atomic64_cmpxchg((v), c, c + (a));
+                if (likely(old == c))
+                        break;
+                c = old;
+        }
+        return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+/* Atomic operations are already serializing */
+#ifdef CONFIG_SMP
+#define smp_mb__before_atomic_dec()     membar_storeload_loadload();
+#define smp_mb__after_atomic_dec()      membar_storeload_storestore();
+#define smp_mb__before_atomic_inc()     membar_storeload_loadload();
+#define smp_mb__after_atomic_inc()      membar_storeload_storestore();
+#else
+#define smp_mb__before_atomic_dec()     barrier()
+#define smp_mb__after_atomic_dec()      barrier()
+#define smp_mb__before_atomic_inc()     barrier()
+#define smp_mb__after_atomic_inc()      barrier()
+#endif
+
+#include <asm-generic/atomic.h>
+#endif /* !(__ARCH_SPARC64_ATOMIC__) */
diff --git a/arch/sparc/include/asm/auxio.h b/arch/sparc/include/asm/auxio.h
new file mode 100644
index 000000000000..13dc67f03011
--- /dev/null
+++ b/arch/sparc/include/asm/auxio.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_AUXIO_H
+#define ___ASM_SPARC_AUXIO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/auxio_64.h>
+#else
+#include <asm/auxio_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/auxio_32.h b/arch/sparc/include/asm/auxio_32.h
new file mode 100644
index 000000000000..e03e088be95f
--- /dev/null
+++ b/arch/sparc/include/asm/auxio_32.h
@@ -0,0 +1,89 @@
+/*
+ * auxio.h:  Definitions and code for the Auxiliary I/O register.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_AUXIO_H
+#define _SPARC_AUXIO_H
+
+#include <asm/system.h>
+#include <asm/vaddrs.h>
+
+/* This register is an unsigned char in IO space.  It does two things.
+ * First, it is used to control the front panel LED light on machines
+ * that have it (good for testing entry points to trap handlers and irq's)
+ * Secondly, it controls various floppy drive parameters.
+ */
+#define AUXIO_ORMEIN      0xf0    /* All writes must set these bits. */
+#define AUXIO_ORMEIN4M    0xc0    /* sun4m - All writes must set these bits. */
+#define AUXIO_FLPY_DENS   0x20    /* Floppy density, high if set. Read only. */
+#define AUXIO_FLPY_DCHG   0x10    /* A disk change occurred.  Read only. */
+#define AUXIO_EDGE_ON     0x10    /* sun4m - On means Jumper block is in. */
+#define AUXIO_FLPY_DSEL   0x08    /* Drive select/start-motor. Write only. */
+#define AUXIO_LINK_TEST   0x08    /* sun4m - On means TPE Carrier detect. */
+
+/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
+#define AUXIO_FLPY_TCNT   0x04    /* Floppy terminal count. Write only. */
+
+/* Set the following to zero to eject the floppy. */
+#define AUXIO_FLPY_EJCT   0x02    /* Eject floppy disk.  Write only. */
+#define AUXIO_LED         0x01    /* On if set, off if unset. Read/Write */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * NOTE: these routines are implementation dependent--
+ * understand the hardware you are querying!
+ */
+extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
+extern unsigned char get_auxio(void); /* .../asm/floppy.h */
+
+/*
+ * The following routines are provided for driver-compatibility
+ * with sparc64 (primarily sunlance.c)
+ */
+
+#define AUXIO_LTE_ON    1
+#define AUXIO_LTE_OFF   0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+#define auxio_set_lte(on) \
+do { \
+        if(on) { \
+                set_auxio(AUXIO_LINK_TEST, 0); \
+        } else { \
+                set_auxio(0, AUXIO_LINK_TEST); \
+        } \
+} while (0)
+
+#define AUXIO_LED_ON    1
+#define AUXIO_LED_OFF   0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+#define auxio_set_led(on) \
+do { \
+        if(on) { \
+                set_auxio(AUXIO_LED, 0); \
+        } else { \
+                set_auxio(0, AUXIO_LED); \
+        } \
+} while (0)
+
+#endif /* !(__ASSEMBLY__) */
+
+
+/* AUXIO2 (Power Off Control) */
+extern __volatile__ unsigned char * auxio_power_register;
+
+#define AUXIO_POWER_DETECT_FAILURE      32
+#define AUXIO_POWER_CLEAR_FAILURE       2
+#define AUXIO_POWER_OFF                 1
+
+
+#endif /* !(_SPARC_AUXIO_H) */
diff --git a/arch/sparc/include/asm/auxio_64.h b/arch/sparc/include/asm/auxio_64.h
new file mode 100644
index 000000000000..f61cd1e3e395
--- /dev/null
+++ b/arch/sparc/include/asm/auxio_64.h
@@ -0,0 +1,100 @@
+/*
+ * auxio.h:  Definitions and code for the Auxiliary I/O registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net)
+ */
+#ifndef _SPARC64_AUXIO_H
+#define _SPARC64_AUXIO_H
+
+/* AUXIO implementations:
+ * sbus-based NCR89C105 "Slavio"
+ *      LED/Floppy (AUX1) register
+ *      Power (AUX2) register
+ *
+ * ebus-based auxio on PCIO
+ *      LED Auxio Register
+ *      Power Auxio Register
+ *
+ * Register definitions from NCR _NCR89C105 Chip Specification_
+ *
+ * SLAVIO AUX1 @ 0x1900000
+ * -------------------------------------------------
+ * | (R) | (R) |  D  | (R) |  E  |  M  |  T  |  L  |
+ * -------------------------------------------------
+ * (R) - bit 7:6,4 are reserved and should be masked in s/w
+ *  D  - Floppy Density Sense (1=high density) R/O
+ *  E  - Link Test Enable, directly reflected on AT&T 7213 LTE pin
+ *  M  - Monitor/Mouse Mux, directly reflected on MON_MSE_MUX pin
+ *  T  - Terminal Count: sends TC pulse to 82077 floppy controller
+ *  L  - System LED on front panel (0=off, 1=on)
+ */
+#define AUXIO_AUX1_MASK         0xc0 /* Mask bits               */
+#define AUXIO_AUX1_FDENS        0x20 /* Floppy Density Sense    */
+#define AUXIO_AUX1_LTE          0x08 /* Link Test Enable        */
+#define AUXIO_AUX1_MMUX         0x04 /* Monitor/Mouse Mux       */
+#define AUXIO_AUX1_FTCNT        0x02 /* Terminal Count,         */
+#define AUXIO_AUX1_LED          0x01 /* System LED              */
+
+/* SLAVIO AUX2 @ 0x1910000
+ * -------------------------------------------------
+ * | (R) | (R) |  D  | (R) | (R) | (R) |  C  |  F  |
+ * -------------------------------------------------
+ * (R) - bits 7:6,4:2 are reserved and should be masked in s/w
+ *  D  - Power Failure Detect (1=power fail)
+ *  C  - Clear Power Failure Detect Int (1=clear)
+ *  F  - Power Off (1=power off)
+ */
+#define AUXIO_AUX2_MASK         0xdc /* Mask Bits               */
+#define AUXIO_AUX2_PFAILDET     0x20 /* Power Fail Detect       */
+#define AUXIO_AUX2_PFAILCLR     0x02 /* Clear Pwr Fail Det Intr */
+#define AUXIO_AUX2_PWR_OFF      0x01 /* Power Off               */
+
+/* Register definitions from Sun Microsystems _PCIO_ p/n 802-7837
+ *
+ * PCIO LED Auxio @ 0x726000
+ * -------------------------------------------------
+ * |             31:1 Unused                 | LED |
+ * -------------------------------------------------
+ * Bits 31:1 unused
+ * LED - System LED on front panel (0=off, 1=on)
+ */
+#define AUXIO_PCIO_LED          0x01 /* System LED              */
+
+/* PCIO Power Auxio @ 0x724000
+ * -------------------------------------------------
+ * |             31:2 Unused           | CPO | SPO |
+ * -------------------------------------------------
+ * Bits 31:2 unused
+ * CPO - Courtesy Power Off (1=off)
+ * SPO - System Power Off   (1=off)
+ */
+#define AUXIO_PCIO_CPWR_OFF     0x02 /* Courtesy Power Off      */
+#define AUXIO_PCIO_SPWR_OFF     0x01 /* System Power Off        */
+
+#ifndef __ASSEMBLY__
+
+extern void __iomem *auxio_register;
+
+#define AUXIO_LTE_ON    1
+#define AUXIO_LTE_OFF   0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+extern void auxio_set_lte(int on);
+
+#define AUXIO_LED_ON    1
+#define AUXIO_LED_OFF   0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+extern void auxio_set_led(int on);
+
+#endif /* ifndef __ASSEMBLY__ */
+
+#endif /* !(_SPARC64_AUXIO_H) */
diff --git a/arch/sparc/include/asm/auxvec.h b/arch/sparc/include/asm/auxvec.h
new file mode 100644
index 000000000000..ad6f360261f6
--- /dev/null
+++ b/arch/sparc/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMSPARC_AUXVEC_H
+#define __ASMSPARC_AUXVEC_H
+
+#endif /* !(__ASMSPARC_AUXVEC_H) */
diff --git a/arch/sparc/include/asm/backoff.h b/arch/sparc/include/asm/backoff.h
new file mode 100644
index 000000000000..fa1fdf67e350
--- /dev/null
+++ b/arch/sparc/include/asm/backoff.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC64_BACKOFF_H
+#define _SPARC64_BACKOFF_H
+
+#define BACKOFF_LIMIT   (4 * 1024)
+
+#ifdef CONFIG_SMP
+
+#define BACKOFF_SETUP(reg)      \
+        mov     1, reg
+
+#define BACKOFF_SPIN(reg, tmp, label)   \
+        mov     reg, tmp; \
+88:     brnz,pt tmp, 88b; \
+         sub    tmp, 1, tmp; \
+        set     BACKOFF_LIMIT, tmp; \
+        cmp     reg, tmp; \
+        bg,pn   %xcc, label; \
+         nop; \
+        ba,pt   %xcc, label; \
+         sllx   reg, 1, reg;
+
+#else
+
+#define BACKOFF_SETUP(reg)
+#define BACKOFF_SPIN(reg, tmp, label) \
+        ba,pt   %xcc, label; \
+         nop;
+
+#endif
+
+#endif /* _SPARC64_BACKOFF_H */
diff --git a/arch/sparc/include/asm/bbc.h b/arch/sparc/include/asm/bbc.h
new file mode 100644
index 000000000000..423a85800aae
--- /dev/null
+++ b/arch/sparc/include/asm/bbc.h
@@ -0,0 +1,225 @@
+/*
+ * bbc.h: Defines for BootBus Controller found on UltraSPARC-III
+ *        systems.
+ *
+ * Copyright (C) 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_BBC_H
+#define _SPARC64_BBC_H
+
+/* Register sizes are indicated by "B" (Byte, 1-byte),
+ * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or
+ * "Q" (Quad, 8 bytes) inside brackets.
+ */
+
+#define BBC_AID         0x00    /* [B] Agent ID                 */
+#define BBC_DEVP        0x01    /* [B] Device Present           */
+#define BBC_ARB         0x02    /* [B] Arbitration              */
+#define BBC_QUIESCE     0x03    /* [B] Quiesce                  */
+#define BBC_WDACTION    0x04    /* [B] Watchdog Action          */
+#define BBC_SPG         0x06    /* [B] Soft POR Gen             */
+#define BBC_SXG         0x07    /* [B] Soft XIR Gen             */
+#define BBC_PSRC        0x08    /* [W] POR Source               */
+#define BBC_XSRC        0x0c    /* [B] XIR Source               */
+#define BBC_CSC         0x0d    /* [B] Clock Synthesizers Control*/
+#define BBC_ES_CTRL     0x0e    /* [H] Energy Star Control      */
+#define BBC_ES_ACT      0x10    /* [W] E* Assert Change Time    */
+#define BBC_ES_DACT     0x14    /* [B] E* De-Assert Change Time */
+#define BBC_ES_DABT     0x15    /* [B] E* De-Assert Bypass Time */
+#define BBC_ES_ABT      0x16    /* [H] E* Assert Bypass Time    */
+#define BBC_ES_PST      0x18    /* [W] E* PLL Settle Time       */
+#define BBC_ES_FSL      0x1c    /* [W] E* Frequency Switch Latency*/
+#define BBC_EBUST       0x20    /* [Q] EBUS Timing              */
+#define BBC_JTAG_CMD    0x28    /* [W] JTAG+ Command            */
+#define BBC_JTAG_CTRL   0x2c    /* [B] JTAG+ Control            */
+#define BBC_I2C_SEL     0x2d    /* [B] I2C Selection            */
+#define BBC_I2C_0_S1    0x2e    /* [B] I2C ctrlr-0 reg S1       */
+#define BBC_I2C_0_S0    0x2f    /* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/
+#define BBC_I2C_1_S1    0x30    /* [B] I2C ctrlr-1 reg S1       */
+#define BBC_I2C_1_S0    0x31    /* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/
+#define BBC_KBD_BEEP    0x32    /* [B] Keyboard Beep            */
+#define BBC_KBD_BCNT    0x34    /* [W] Keyboard Beep Counter    */
+
+#define BBC_REGS_SIZE   0x40
+
+/* There is a 2K scratch ram area at offset 0x80000 but I doubt
+ * we will use it for anything.
+ */
+
+/* Agent ID register.  This register shows the Safari Agent ID
+ * for the processors.  The value returned depends upon which
+ * cpu is reading the register.
+ */
+#define BBC_AID_ID      0x07    /* Safari ID            */
+#define BBC_AID_RESV    0xf8    /* Reserved             */
+
+/* Device Present register.  One can determine which cpus are actually
+ * present in the machine by interrogating this register.
+ */
+#define BBC_DEVP_CPU0   0x01    /* Processor 0 present  */
+#define BBC_DEVP_CPU1   0x02    /* Processor 1 present  */
+#define BBC_DEVP_CPU2   0x04    /* Processor 2 present  */
+#define BBC_DEVP_CPU3   0x08    /* Processor 3 present  */
+#define BBC_DEVP_RESV   0xf0    /* Reserved             */
+
+/* Arbitration register.  This register is used to block access to
+ * the BBC from a particular cpu.
+ */
+#define BBC_ARB_CPU0    0x01    /* Enable cpu 0 BBC arbitratrion */
+#define BBC_ARB_CPU1    0x02    /* Enable cpu 1 BBC arbitratrion */
+#define BBC_ARB_CPU2    0x04    /* Enable cpu 2 BBC arbitratrion */
+#define BBC_ARB_CPU3    0x08    /* Enable cpu 3 BBC arbitratrion */
+#define BBC_ARB_RESV    0xf0    /* Reserved                      */
+
+/* Quiesce register.  Bus and BBC segments for cpus can be disabled
+ * with this register, ie. for hot plugging.
+ */
+#define BBC_QUIESCE_S02 0x01    /* Quiesce Safari segment for cpu 0 and 2 */
+#define BBC_QUIESCE_S13 0x02    /* Quiesce Safari segment for cpu 1 and 3 */
+#define BBC_QUIESCE_B02 0x04    /* Quiesce BBC segment for cpu 0 and 2    */
+#define BBC_QUIESCE_B13 0x08    /* Quiesce BBC segment for cpu 1 and 3    */
+#define BBC_QUIESCE_FD0 0x10    /* Disable Fatal_Error[0] reporting       */
+#define BBC_QUIESCE_FD1 0x20    /* Disable Fatal_Error[1] reporting       */
+#define BBC_QUIESCE_FD2 0x40    /* Disable Fatal_Error[2] reporting       */
+#define BBC_QUIESCE_FD3 0x80    /* Disable Fatal_Error[3] reporting       */
+
+/* Watchdog Action register.  When the watchdog device timer expires
+ * a line is enabled to the BBC.  The action BBC takes when this line
+ * is asserted can be controlled by this regiser.
+ */
+#define BBC_WDACTION_RST  0x01  /* When set, watchdog causes system reset.
+                                 * When clear, BBC ignores watchdog signal.
+                                 */
+#define BBC_WDACTION_RESV 0xfe  /* Reserved */
+
+/* Soft_POR_GEN register.  The POR (Power On Reset) signal may be asserted
+ * for specific processors or all processors via this register.
+ */
+#define BBC_SPG_CPU0    0x01 /* Assert POR for processor 0      */
+#define BBC_SPG_CPU1    0x02 /* Assert POR for processor 1      */
+#define BBC_SPG_CPU2    0x04 /* Assert POR for processor 2      */
+#define BBC_SPG_CPU3    0x08 /* Assert POR for processor 3      */
+#define BBC_SPG_CPUALL  0x10 /* Reset all processors and reset
+                              * the entire system.
+                              */
+#define BBC_SPG_RESV    0xe0 /* Reserved                        */
+
+/* Soft_XIR_GEN register.  The XIR (eXternally Initiated Reset) signal
+ * may be asserted to specific processors via this register.
+ */
+#define BBC_SXG_CPU0    0x01 /* Assert XIR for processor 0      */
+#define BBC_SXG_CPU1    0x02 /* Assert XIR for processor 1      */
+#define BBC_SXG_CPU2    0x04 /* Assert XIR for processor 2      */
+#define BBC_SXG_CPU3    0x08 /* Assert XIR for processor 3      */
+#define BBC_SXG_RESV    0xf0 /* Reserved                        */
+
+/* POR Source register.  One may identify the cause of the most recent
+ * reset by reading this register.
+ */
+#define BBC_PSRC_SPG0   0x0001 /* CPU 0 reset via BBC_SPG register      */
+#define BBC_PSRC_SPG1   0x0002 /* CPU 1 reset via BBC_SPG register      */
+#define BBC_PSRC_SPG2   0x0004 /* CPU 2 reset via BBC_SPG register      */
+#define BBC_PSRC_SPG3   0x0008 /* CPU 3 reset via BBC_SPG register      */
+#define BBC_PSRC_SPGSYS 0x0010 /* System reset via BBC_SPG register     */
+#define BBC_PSRC_JTAG   0x0020 /* System reset via JTAG+                */
+#define BBC_PSRC_BUTTON 0x0040 /* System reset via push-button dongle   */
+#define BBC_PSRC_PWRUP  0x0080 /* System reset via power-up             */
+#define BBC_PSRC_FE0    0x0100 /* CPU 0 reported Fatal_Error            */
+#define BBC_PSRC_FE1    0x0200 /* CPU 1 reported Fatal_Error            */
+#define BBC_PSRC_FE2    0x0400 /* CPU 2 reported Fatal_Error            */
+#define BBC_PSRC_FE3    0x0800 /* CPU 3 reported Fatal_Error            */
+#define BBC_PSRC_FE4    0x1000 /* Schizo reported Fatal_Error           */
+#define BBC_PSRC_FE5    0x2000 /* Safari device 5 reported Fatal_Error  */
+#define BBC_PSRC_FE6    0x4000 /* CPMS reported Fatal_Error             */
+#define BBC_PSRC_SYNTH  0x8000 /* System reset when on-board clock synthesizers
+                                * were updated.
+                                */
+#define BBC_PSRC_WDT   0x10000 /* System reset via Super I/O watchdog   */
+#define BBC_PSRC_RSC   0x20000 /* System reset via RSC remote monitoring
+                                * device
+                                */
+
+/* XIR Source register.  The source of an XIR event sent to a processor may
+ * be determined via this register.
+ */
+#define BBC_XSRC_SXG0   0x01    /* CPU 0 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG1   0x02    /* CPU 1 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG2   0x04    /* CPU 2 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG3   0x08    /* CPU 3 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_JTAG   0x10    /* All CPUs received XIR via JTAG+         */
+#define BBC_XSRC_W_OR_B 0x20    /* All CPUs received XIR either because:
+                                 * a) Super I/O watchdog fired, or
+                                 * b) XIR push button was activated
+                                 */
+#define BBC_XSRC_RESV   0xc0    /* Reserved                                */
+
+/* Clock Synthesizers Control register.  This register provides the big-bang
+ * programming interface to the two clock synthesizers of the machine.
+ */
+#define BBC_CSC_SLOAD   0x01    /* Directly connected to S_LOAD pins    */
+#define BBC_CSC_SDATA   0x02    /* Directly connected to S_DATA pins    */
+#define BBC_CSC_SCLOCK  0x04    /* Directly connected to S_CLOCK pins   */
+#define BBC_CSC_RESV    0x78    /* Reserved                             */
+#define BBC_CSC_RST     0x80    /* Generate system reset when S_LOAD==1 */
+
+/* Energy Star Control register.  This register is used to generate the
+ * clock frequency change trigger to the main system devices (Schizo and
+ * the processors).  The transition occurs when bits in this register
+ * go from 0 to 1, only one bit must be set at once else no action
+ * occurs.  Basically the sequence of events is:
+ * a) Choose new frequency: full, 1/2 or 1/32
+ * b) Program this desired frequency into the cpus and Schizo.
+ * c) Set the same value in this register.
+ * d) 16 system clocks later, clear this register.
+ */
+#define BBC_ES_CTRL_1_1         0x01    /* Full frequency       */
+#define BBC_ES_CTRL_1_2         0x02    /* 1/2 frequency        */
+#define BBC_ES_CTRL_1_32        0x20    /* 1/32 frequency       */
+#define BBC_ES_RESV             0xdc    /* Reserved             */
+
+/* Energy Star Assert Change Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the detection of FREEZE_ACK being asserted and the assertion of
+ * the CLK_CHANGE_L[2:0] signals.
+ */
+#define BBC_ES_ACT_VAL  0xff
+
+/* Energy Star Assert Bypass Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of
+ * the ESTAR_PLL_BYPASS signal.
+ */
+#define BBC_ES_ABT_VAL  0xffff
+
+/* Energy Star PLL Settle Time register.  This determines the number of
+ * BBC clock cycles (which is half the system frequency) between the
+ * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L
+ * signal.
+ */
+#define BBC_ES_PST_VAL  0xffffffff
+
+/* Energy Star Frequency Switch Latency register.  This is the number of
+ * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first
+ * edge of the Safari clock at the new frequency.
+ */
+#define BBC_ES_FSL_VAL  0xffffffff
+
+/* Keyboard Beep control register.  This is a simple enabler for the audio
+ * beep sound.
+ */
+#define BBC_KBD_BEEP_ENABLE     0x01 /* Enable beep     */
+#define BBC_KBD_BEEP_RESV       0xfe /* Reserved        */
+
+/* Keyboard Beep Counter register.  There is a free-running counter inside
+ * the BBC which runs at half the system clock.  The bit set in this register
+ * determines when the audio sound is generated.  So for example if bit
+ * 10 is set, the audio beep will oscillate at 1/(2**12).  The keyboard beep
+ * generator automatically selects a different bit to use if the system clock
+ * is changed via Energy Star.
+ */
+#define BBC_KBD_BCNT_BITS       0x0007fc00
+#define BBC_KBC_BCNT_RESV       0xfff803ff
+
+#endif /* _SPARC64_BBC_H */
+
diff --git a/arch/sparc/include/asm/bitext.h b/arch/sparc/include/asm/bitext.h
new file mode 100644
index 000000000000..297b2f2fcb49
--- /dev/null
+++ b/arch/sparc/include/asm/bitext.h
@@ -0,0 +1,27 @@
+/*
+ * bitext.h: Bit string operations on the sparc, specific to architecture.
+ *
+ * Copyright 2002 Pete Zaitcev <zaitcev@yahoo.com>
+ */
+
+#ifndef _SPARC_BITEXT_H
+#define _SPARC_BITEXT_H
+
+#include <linux/spinlock.h>
+
+struct bit_map {
+        spinlock_t lock;
+        unsigned long *map;
+        int size;
+        int used;
+        int last_off;
+        int last_size;
+        int first_free;
+        int num_colors;
+};
+
+extern int bit_map_string_get(struct bit_map *t, int len, int align);
+extern void bit_map_clear(struct bit_map *t, int offset, int len);
+extern void bit_map_init(struct bit_map *t, unsigned long *map, int size);
+
+#endif /* defined(_SPARC_BITEXT_H) */
diff --git a/arch/sparc/include/asm/bitops.h b/arch/sparc/include/asm/bitops.h
new file mode 100644
index 000000000000..b1edd94bd64f
--- /dev/null
+++ b/arch/sparc/include/asm/bitops.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_BITOPS_H
+#define ___ASM_SPARC_BITOPS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/bitops_64.h>
+#else
+#include <asm/bitops_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/bitops_32.h b/arch/sparc/include/asm/bitops_32.h
new file mode 100644
index 000000000000..68b98a7e6454
--- /dev/null
+++ b/arch/sparc/include/asm/bitops_32.h
@@ -0,0 +1,111 @@
+/*
+ * bitops.h: Bit string operations on the Sparc.
+ *
+ * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1996 Eddie C. Dost   (ecd@skynet.be)
+ * Copyright 2001 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC_BITOPS_H
+#define _SPARC_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+extern unsigned long ___set_bit(unsigned long *addr, unsigned long mask);
+extern unsigned long ___clear_bit(unsigned long *addr, unsigned long mask);
+extern unsigned long ___change_bit(unsigned long *addr, unsigned long mask);
+
+/*
+ * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0'
+ * is in the highest of the four bytes and bit '31' is the high bit
+ * within the first byte. Sparc is BIG-Endian. Unless noted otherwise
+ * all bit-ops return 0 if bit was previously clear and != 0 otherwise.
+ */
+static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+        unsigned long *ADDR, mask;
+
+        ADDR = ((unsigned long *) addr) + (nr >> 5);
+        mask = 1 << (nr & 31);
+
+        return ___set_bit(ADDR, mask) != 0;
+}
+
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+        unsigned long *ADDR, mask;
+
+        ADDR = ((unsigned long *) addr) + (nr >> 5);
+        mask = 1 << (nr & 31);
+
+        (void) ___set_bit(ADDR, mask);
+}
+
+static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+        unsigned long *ADDR, mask;
+
+        ADDR = ((unsigned long *) addr) + (nr >> 5);
+        mask = 1 << (nr & 31);
+
+        return ___clear_bit(ADDR, mask) != 0;
+}
+
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+        unsigned long *ADDR, mask;
+
+        ADDR = ((unsigned long *) addr) + (nr >> 5);
+        mask = 1 << (nr & 31);
+
+        (void) ___clear_bit(ADDR, mask);
+}
+
+static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+        unsigned long *ADDR, mask;
+
+        ADDR = ((unsigned long *) addr) + (nr >> 5);
+        mask = 1 << (nr & 31);
+
+        return ___change_bit(ADDR, mask) != 0;
+}
+
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+        unsigned long *ADDR, mask;
+
+        ADDR = ((unsigned long *) addr) + (nr >> 5);
+        mask = 1 << (nr & 31);
+
+        (void) ___change_bit(ADDR, mask);
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#define smp_mb__before_clear_bit()      do { } while(0)
+#define smp_mb__after_clear_bit()       do { } while(0)
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC_BITOPS_H) */
diff --git a/arch/sparc/include/asm/bitops_64.h b/arch/sparc/include/asm/bitops_64.h
new file mode 100644
index 000000000000..bb87b8080220
--- /dev/null
+++ b/arch/sparc/include/asm/bitops_64.h
@@ -0,0 +1,107 @@
+/*
+ * bitops.h: Bit string operations on the V9.
+ *
+ * Copyright 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_BITOPS_H
+#define _SPARC64_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+extern int test_and_set_bit(unsigned long nr, volatile unsigned long *addr);
+extern int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr);
+extern int test_and_change_bit(unsigned long nr, volatile unsigned long *addr);
+extern void set_bit(unsigned long nr, volatile unsigned long *addr);
+extern void clear_bit(unsigned long nr, volatile unsigned long *addr);
+extern void change_bit(unsigned long nr, volatile unsigned long *addr);
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#ifdef CONFIG_SMP
+#define smp_mb__before_clear_bit()      membar_storeload_loadload()
+#define smp_mb__after_clear_bit()       membar_storeload_storestore()
+#else
+#define smp_mb__before_clear_bit()      barrier()
+#define smp_mb__after_clear_bit()       barrier()
+#endif
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#ifdef ULTRA_HAS_POPULATION_COUNT
+
+static inline unsigned int hweight64(unsigned long w)
+{
+        unsigned int res;
+
+        __asm__ ("popc %1,%0" : "=r" (res) : "r" (w));
+        return res;
+}
+
+static inline unsigned int hweight32(unsigned int w)
+{
+        unsigned int res;
+
+        __asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffffffff));
+        return res;
+}
+
+static inline unsigned int hweight16(unsigned int w)
+{
+        unsigned int res;
+
+        __asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffff));
+        return res;
+}
+
+static inline unsigned int hweight8(unsigned int w)
+{
+        unsigned int res;
+
+        __asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xff));
+        return res;
+}
+
+#else
+
+#include <asm-generic/bitops/hweight.h>
+
+#endif
+#include <asm-generic/bitops/lock.h>
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(lock,nr,addr) \
+        test_and_set_bit((nr) ^ 0x38,(unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock,nr,addr) \
+        test_and_clear_bit((nr) ^ 0x38,(unsigned long *)(addr))
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC64_BITOPS_H) */
diff --git a/arch/sparc/include/asm/bpp.h b/arch/sparc/include/asm/bpp.h
new file mode 100644
index 000000000000..31f515e499a7
--- /dev/null
+++ b/arch/sparc/include/asm/bpp.h
@@ -0,0 +1,73 @@
+#ifndef _SPARC_BPP_H
+#define _SPARC_BPP_H
+
+/*
+ * Copyright (c) 1995 Picture Elements
+ *      Stephen Williams
+ *      Gus Baldauf
+ *
+ * Linux/SPARC port by Peter Zaitcev.
+ * Integration into SPARC tree by Tom Dyas.
+ */
+
+#include  <linux/ioctl.h>
+
+/*
+ * This is a driver that supports IEEE Std 1284-1994 communications
+ * with compliant or compatible devices. It will use whatever features
+ * the device supports, prefering those that are typically faster.
+ *
+ * When the device is opened, it is left in COMPATIBILITY mode, and
+ * writes work like any printer device. The driver only attempt to
+ * negotiate 1284 modes when needed so that plugs can be pulled,
+ * switch boxes switched, etc., without disrupting things. It will
+ * also leave the device in compatibility mode when closed.
+ */
+
+
+
+/*
+ * This driver also supplies ioctls to manually manipulate the
+ * pins. This is great for testing devices, or writing code to deal
+ * with bizzarro-mode of the ACME Special TurboThingy Plus.
+ *
+ * NOTE: These ioctl currently do not interact well with
+ * read/write. Caveat emptor.
+ *
+ * PUT_PINS allows us to assign the sense of all the pins, including
+ * the data pins if being driven by the host. The GET_PINS returns the
+ * pins that the peripheral drives, including data if appropriate.
+ */
+
+# define BPP_PUT_PINS _IOW('B', 1, int)
+# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
+# define BPP_PUT_DATA _IOW('B', 3, int)
+# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
+
+/*
+ * Set the data bus to input mode. Disengage the data bin driver and
+ * be prepared to read values from the peripheral. If the arg is 0,
+ * then revert the bus to output mode.
+ */
+# define BPP_SET_INPUT _IOW('B', 5, int)
+
+/*
+ * These bits apply to the PUT operation...
+ */
+# define BPP_PP_nStrobe   0x0001
+# define BPP_PP_nAutoFd   0x0002
+# define BPP_PP_nInit     0x0004
+# define BPP_PP_nSelectIn 0x0008
+
+/*
+ * These apply to the GET operation, which also reads the current value
+ * of the previously put values. A bit mask of these will be returned
+ * as a bit mask in the return code of the ioctl().
+ */
+# define BPP_GP_nAck   0x0100
+# define BPP_GP_Busy   0x0200
+# define BPP_GP_PError 0x0400
+# define BPP_GP_Select 0x0800
+# define BPP_GP_nFault 0x1000
+
+#endif
diff --git a/arch/sparc/include/asm/btfixup.h b/arch/sparc/include/asm/btfixup.h
new file mode 100644
index 000000000000..797722cf69f2
--- /dev/null
+++ b/arch/sparc/include/asm/btfixup.h
@@ -0,0 +1,208 @@
+/*
+ *  asm/btfixup.h:    Macros for boot time linking.
+ *
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+ 
+#ifndef _SPARC_BTFIXUP_H
+#define _SPARC_BTFIXUP_H
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef MODULE
+extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void);
+
+#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module()
+#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module()
+#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module()
+#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module()
+#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module
+
+#else
+
+#define BTFIXUP_SIMM13(__name) ___sf_##__name()
+#define BTFIXUP_HALF(__name) ___af_##__name()
+#define BTFIXUP_SETHI(__name) ___hf_##__name()
+#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name)
+/* This must be written in assembly and present in a sethi */
+#define BTFIXUP_BLACKBOX(__name) ___b_##__name
+#endif /* MODULE */
+
+/* Fixup call xx */
+
+#define BTFIXUPDEF_CALL(__type, __name, __args...)                                      \
+        extern __type ___f_##__name(__args);                                            \
+        extern unsigned ___fs_##__name[3];
+#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...)                                \
+        extern __type ___f_##__name(__args) __attribute_const__;                        \
+        extern unsigned ___fs_##__name[3];
+#define BTFIXUP_CALL(__name) ___f_##__name
+
+#define BTFIXUPDEF_BLACKBOX(__name)                                                     \
+        extern unsigned ___bs_##__name[2];
+
+/* Put bottom 13bits into some register variable */
+
+#define BTFIXUPDEF_SIMM13(__name)                                                       \
+        static inline unsigned int ___sf_##__name(void) __attribute_const__;            \
+        extern unsigned ___ss_##__name[2];                                              \
+        static inline unsigned int ___sf_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret));                  \
+                return ret;                                                             \
+        }
+#define BTFIXUPDEF_SIMM13_INIT(__name,__val)                                            \
+        static inline unsigned int ___sf_##__name(void) __attribute_const__;            \
+        extern unsigned ___ss_##__name[2];                                              \
+        static inline unsigned int ___sf_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+                return ret;                                                             \
+        }
+
+/* Put either bottom 13 bits, or upper 22 bits into some register variable
+ * (depending on the value, this will lead into sethi FIX, reg; or
+ * mov FIX, reg; )
+ */
+
+#define BTFIXUPDEF_HALF(__name)                                                         \
+        static inline unsigned int ___af_##__name(void) __attribute_const__;            \
+        extern unsigned ___as_##__name[2];                                              \
+        static inline unsigned int ___af_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret));                  \
+                return ret;                                                             \
+        }
+#define BTFIXUPDEF_HALF_INIT(__name,__val)                                              \
+        static inline unsigned int ___af_##__name(void) __attribute_const__;            \
+        extern unsigned ___as_##__name[2];                                              \
+        static inline unsigned int ___af_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+                return ret;                                                             \
+        }
+
+/* Put upper 22 bits into some register variable */
+
+#define BTFIXUPDEF_SETHI(__name)                                                        \
+        static inline unsigned int ___hf_##__name(void) __attribute_const__;            \
+        extern unsigned ___hs_##__name[2];                                              \
+        static inline unsigned int ___hf_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret));               \
+                return ret;                                                             \
+        }
+#define BTFIXUPDEF_SETHI_INIT(__name,__val)                                             \
+        static inline unsigned int ___hf_##__name(void) __attribute_const__;            \
+        extern unsigned ___hs_##__name[2];                                              \
+        static inline unsigned int ___hf_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" :         \
+                         "=r"(ret));                                                    \
+                return ret;                                                             \
+        }
+
+/* Put a full 32bit integer into some register variable */
+
+#define BTFIXUPDEF_INT(__name)                                                          \
+        extern unsigned char ___i_##__name;                                             \
+        extern unsigned ___is_##__name[2];
+
+#define BTFIXUPCALL_NORM        0x00000000                      /* Always call */
+#define BTFIXUPCALL_NOP         0x01000000                      /* Possibly optimize to nop */
+#define BTFIXUPCALL_RETINT(i)   (0x90102000|((i) & 0x1fff))     /* Possibly optimize to mov i, %o0 */
+#define BTFIXUPCALL_ORINT(i)    (0x90122000|((i) & 0x1fff))     /* Possibly optimize to or %o0, i, %o0 */
+#define BTFIXUPCALL_RETO0       0x01000000                      /* Return first parameter, actually a nop */
+#define BTFIXUPCALL_ANDNINT(i)  (0x902a2000|((i) & 0x1fff))     /* Possibly optimize to andn %o0, i, %o0 */
+#define BTFIXUPCALL_SWAPO0O1    0xd27a0000                      /* Possibly optimize to swap [%o0],%o1 */
+#define BTFIXUPCALL_SWAPO0G0    0xc07a0000                      /* Possibly optimize to swap [%o0],%g0 */
+#define BTFIXUPCALL_SWAPG1G2    0xc4784000                      /* Possibly optimize to swap [%g1],%g2 */
+#define BTFIXUPCALL_STG0O0      0xc0220000                      /* Possibly optimize to st %g0,[%o0] */
+#define BTFIXUPCALL_STO1O0      0xd2220000                      /* Possibly optimize to st %o1,[%o0] */
+
+#define BTFIXUPSET_CALL(__name, __addr, __insn)                                         \
+        do {                                                                            \
+                ___fs_##__name[0] |= 1;                                                 \
+                ___fs_##__name[1] = (unsigned long)__addr;                              \
+                ___fs_##__name[2] = __insn;                                             \
+        } while (0)
+        
+#define BTFIXUPSET_BLACKBOX(__name, __func)                                             \
+        do {                                                                            \
+                ___bs_##__name[0] |= 1;                                                 \
+                ___bs_##__name[1] = (unsigned long)__func;                              \
+        } while (0)
+        
+#define BTFIXUPCOPY_CALL(__name, __from)                                                \
+        do {                                                                            \
+                ___fs_##__name[0] |= 1;                                                 \
+                ___fs_##__name[1] = ___fs_##__from[1];                                  \
+                ___fs_##__name[2] = ___fs_##__from[2];                                  \
+        } while (0)
+                
+#define BTFIXUPSET_SIMM13(__name, __val)                                                \
+        do {                                                                            \
+                ___ss_##__name[0] |= 1;                                                 \
+                ___ss_##__name[1] = (unsigned)__val;                                    \
+        } while (0)
+        
+#define BTFIXUPCOPY_SIMM13(__name, __from)                                              \
+        do {                                                                            \
+                ___ss_##__name[0] |= 1;                                                 \
+                ___ss_##__name[1] = ___ss_##__from[1];                                  \
+        } while (0)
+                
+#define BTFIXUPSET_HALF(__name, __val)                                                  \
+        do {                                                                            \
+                ___as_##__name[0] |= 1;                                                 \
+                ___as_##__name[1] = (unsigned)__val;                                    \
+        } while (0)
+        
+#define BTFIXUPCOPY_HALF(__name, __from)                                                \
+        do {                                                                            \
+                ___as_##__name[0] |= 1;                                                 \
+                ___as_##__name[1] = ___as_##__from[1];                                  \
+        } while (0)
+                
+#define BTFIXUPSET_SETHI(__name, __val)                                                 \
+        do {                                                                            \
+                ___hs_##__name[0] |= 1;                                                 \
+                ___hs_##__name[1] = (unsigned)__val;                                    \
+        } while (0)
+        
+#define BTFIXUPCOPY_SETHI(__name, __from)                                               \
+        do {                                                                            \
+                ___hs_##__name[0] |= 1;                                                 \
+                ___hs_##__name[1] = ___hs_##__from[1];                                  \
+        } while (0)
+                
+#define BTFIXUPSET_INT(__name, __val)                                                   \
+        do {                                                                            \
+                ___is_##__name[0] |= 1;                                                 \
+                ___is_##__name[1] = (unsigned)__val;                                    \
+        } while (0)
+        
+#define BTFIXUPCOPY_INT(__name, __from)                                                 \
+        do {                                                                            \
+                ___is_##__name[0] |= 1;                                                 \
+                ___is_##__name[1] = ___is_##__from[1];                                  \
+        } while (0)
+        
+#define BTFIXUPVAL_CALL(__name)                                                         \
+        ((unsigned long)___fs_##__name[1])
+        
+extern void btfixup(void);
+
+#else /* __ASSEMBLY__ */
+
+#define BTFIXUP_SETHI(__name)                   %hi(___h_ ## __name)
+#define BTFIXUP_SETHI_INIT(__name,__val)        %hi(___h_ ## __name ## __btset_ ## __val)
+
+#endif /* __ASSEMBLY__ */
+        
+#endif /* !(_SPARC_BTFIXUP_H) */
diff --git a/arch/sparc/include/asm/bug.h b/arch/sparc/include/asm/bug.h
new file mode 100644
index 000000000000..8a59e5a8c217
--- /dev/null
+++ b/arch/sparc/include/asm/bug.h
@@ -0,0 +1,22 @@
+#ifndef _SPARC_BUG_H
+#define _SPARC_BUG_H
+
+#ifdef CONFIG_BUG
+#include <linux/compiler.h>
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern void do_BUG(const char *file, int line);
+#define BUG() do {                                      \
+        do_BUG(__FILE__, __LINE__);                     \
+        __builtin_trap();                               \
+} while (0)
+#else
+#define BUG()           __builtin_trap()
+#endif
+
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/sparc/include/asm/bugs.h b/arch/sparc/include/asm/bugs.h
new file mode 100644
index 000000000000..e179bc12f64a
--- /dev/null
+++ b/arch/sparc/include/asm/bugs.h
@@ -0,0 +1,24 @@
+/* include/asm/bugs.h:  Sparc probes for various bugs.
+ *
+ * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifdef CONFIG_SPARC32
+#include <asm/cpudata.h>
+#endif
+
+#ifdef CONFIG_SPARC64
+#include <asm/sstate.h>
+#endif
+
+extern unsigned long loops_per_jiffy;
+
+static void __init check_bugs(void)
+{
+#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
+        cpu_data(0).udelay_val = loops_per_jiffy;
+#endif
+#ifdef CONFIG_SPARC64
+        sstate_running();
+#endif
+}
diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h
new file mode 100644
index 000000000000..bcd83aa351c5
--- /dev/null
+++ b/arch/sparc/include/asm/byteorder.h
@@ -0,0 +1,57 @@
+#ifndef _SPARC_BYTEORDER_H
+#define _SPARC_BYTEORDER_H
+
+#include <asm/types.h>
+#include <asm/asi.h>
+
+#ifdef __GNUC__
+
+#ifdef CONFIG_SPARC32
+#define __SWAB_64_THRU_32__
+#endif
+
+#ifdef CONFIG_SPARC64
+
+static inline __u16 ___arch__swab16p(const __u16 *addr)
+{
+        __u16 ret;
+
+        __asm__ __volatile__ ("lduha [%1] %2, %0"
+                              : "=r" (ret)
+                              : "r" (addr), "i" (ASI_PL));
+        return ret;
+}
+
+static inline __u32 ___arch__swab32p(const __u32 *addr)
+{
+        __u32 ret;
+
+        __asm__ __volatile__ ("lduwa [%1] %2, %0"
+                              : "=r" (ret)
+                              : "r" (addr), "i" (ASI_PL));
+        return ret;
+}
+
+static inline __u64 ___arch__swab64p(const __u64 *addr)
+{
+        __u64 ret;
+
+        __asm__ __volatile__ ("ldxa [%1] %2, %0"
+                              : "=r" (ret)
+                              : "r" (addr), "i" (ASI_PL));
+        return ret;
+}
+
+#define __arch__swab16p(x) ___arch__swab16p(x)
+#define __arch__swab32p(x) ___arch__swab32p(x)
+#define __arch__swab64p(x) ___arch__swab64p(x)
+
+#endif /* CONFIG_SPARC64 */
+
+#define __BYTEORDER_HAS_U64__
+
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _SPARC_BYTEORDER_H */
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
new file mode 100644
index 000000000000..41f85ae4bd4a
--- /dev/null
+++ b/arch/sparc/include/asm/cache.h
@@ -0,0 +1,138 @@
+/* cache.h:  Cache specific code for the Sparc.  These include flushing
+ *           and direct tag/data line access.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC_CACHE_H
+#define _SPARC_CACHE_H
+
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
+
+#ifdef CONFIG_SPARC32
+#define SMP_CACHE_BYTES_SHIFT 5
+#else
+#define SMP_CACHE_BYTES_SHIFT 6
+#endif
+
+#define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#ifdef CONFIG_SPARC32
+#include <asm/asi.h>
+
+/* Direct access to the instruction cache is provided through and
+ * alternate address space.  The IDC bit must be off in the ICCR on
+ * HyperSparcs for these accesses to work.  The code below does not do
+ * any checking, the caller must do so.  These routines are for
+ * diagnostics only, but could end up being useful.  Use with care.
+ * Also, you are asking for trouble if you execute these in one of the
+ * three instructions following a %asr/%psr access or modification.
+ */
+
+/* First, cache-tag access. */
+static inline unsigned int get_icache_tag(int setnum, int tagnum)
+{
+        unsigned int vaddr, retval;
+
+        vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+        __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+                             "=r" (retval) :
+                             "r" (vaddr), "i" (ASI_M_TXTC_TAG));
+        return retval;
+}
+
+static inline void put_icache_tag(int setnum, int tagnum, unsigned int entry)
+{
+        unsigned int vaddr;
+
+        vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+        __asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+                             "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) :
+                             "memory");
+}
+
+/* Second cache-data access.  The data is returned two-32bit quantities
+ * at a time.
+ */
+static inline void get_icache_data(int setnum, int tagnum, int subblock,
+                                       unsigned int *data)
+{
+        unsigned int value1, value2, vaddr;
+
+        vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+                ((subblock&0x3) << 3);
+        __asm__ __volatile__("ldda [%2] %3, %%g2\n\t"
+                             "or %%g0, %%g2, %0\n\t"
+                             "or %%g0, %%g3, %1\n\t" :
+                             "=r" (value1), "=r" (value2) :
+                             "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+                             "g2", "g3");
+        data[0] = value1; data[1] = value2;
+}
+
+static inline void put_icache_data(int setnum, int tagnum, int subblock,
+                                       unsigned int *data)
+{
+        unsigned int value1, value2, vaddr;
+
+        vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+                ((subblock&0x3) << 3);
+        value1 = data[0]; value2 = data[1];
+        __asm__ __volatile__("or %%g0, %0, %%g2\n\t"
+                             "or %%g0, %1, %%g3\n\t"
+                             "stda %%g2, [%2] %3\n\t" : :
+                             "r" (value1), "r" (value2), 
+                             "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+                             "g2", "g3", "memory" /* no joke */);
+}
+
+/* Different types of flushes with the ICACHE.  Some of the flushes
+ * affect both the ICACHE and the external cache.  Others only clear
+ * the ICACHE entries on the cpu itself.  V8's (most) allow
+ * granularity of flushes on the packet (element in line), whole line,
+ * and entire cache (ie. all lines) level.  The ICACHE only flushes are
+ * ROSS HyperSparc specific and are in ross.h
+ */
+
+/* Flushes which clear out both the on-chip and external caches */
+static inline void flush_ei_page(unsigned int addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+                             "r" (addr), "i" (ASI_M_FLUSH_PAGE) :
+                             "memory");
+}
+
+static inline void flush_ei_seg(unsigned int addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+                             "r" (addr), "i" (ASI_M_FLUSH_SEG) :
+                             "memory");
+}
+
+static inline void flush_ei_region(unsigned int addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+                             "r" (addr), "i" (ASI_M_FLUSH_REGION) :
+                             "memory");
+}
+
+static inline void flush_ei_ctx(unsigned int addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+                             "r" (addr), "i" (ASI_M_FLUSH_CTX) :
+                             "memory");
+}
+
+static inline void flush_ei_user(unsigned int addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+                             "r" (addr), "i" (ASI_M_FLUSH_USER) :
+                             "memory");
+}
+#endif /* CONFIG_SPARC32 */
+
+#endif /* !(_SPARC_CACHE_H) */
diff --git a/arch/sparc/include/asm/cacheflush.h b/arch/sparc/include/asm/cacheflush.h
new file mode 100644
index 000000000000..049168087b19
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CACHEFLUSH_H
+#define ___ASM_SPARC_CACHEFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cacheflush_64.h>
+#else
+#include <asm/cacheflush_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/cacheflush_32.h b/arch/sparc/include/asm/cacheflush_32.h
new file mode 100644
index 000000000000..68ac10910271
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush_32.h
@@ -0,0 +1,85 @@
+#ifndef _SPARC_CACHEFLUSH_H
+#define _SPARC_CACHEFLUSH_H
+
+#include <linux/mm.h>           /* Common for other includes */
+// #include <linux/kernel.h> from pgalloc.h
+// #include <linux/sched.h>  from pgalloc.h
+
+// #include <asm/page.h>
+#include <asm/btfixup.h>
+
+/*
+ * Fine grained cache flushing.
+ */
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_cache_all, void)
+BTFIXUPDEF_CALL(void, local_flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_cache_all() BTFIXUP_CALL(local_flush_cache_all)()
+#define local_flush_cache_mm(mm) BTFIXUP_CALL(local_flush_cache_mm)(mm)
+#define local_flush_cache_range(vma,start,end) BTFIXUP_CALL(local_flush_cache_range)(vma,start,end)
+#define local_flush_cache_page(vma,addr) BTFIXUP_CALL(local_flush_cache_page)(vma,addr)
+
+BTFIXUPDEF_CALL(void, local_flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define local_flush_page_to_ram(addr) BTFIXUP_CALL(local_flush_page_to_ram)(addr)
+#define local_flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(local_flush_sig_insns)(mm,insn_addr)
+
+extern void smp_flush_cache_all(void);
+extern void smp_flush_cache_mm(struct mm_struct *mm);
+extern void smp_flush_cache_range(struct vm_area_struct *vma,
+                                  unsigned long start,
+                                  unsigned long end);
+extern void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page);
+
+extern void smp_flush_page_to_ram(unsigned long page);
+extern void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_cache_all, void)
+BTFIXUPDEF_CALL(void, flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)()
+#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_dup_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr)
+#define flush_icache_range(start, end)          do { } while (0)
+#define flush_icache_page(vma, pg)              do { } while (0)
+
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+        do {                                                    \
+                flush_cache_page(vma, vaddr, page_to_pfn(page));\
+                memcpy(dst, src, len);                          \
+        } while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+        do {                                                    \
+                flush_cache_page(vma, vaddr, page_to_pfn(page));\
+                memcpy(dst, src, len);                          \
+        } while (0)
+
+BTFIXUPDEF_CALL(void, __flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define __flush_page_to_ram(addr) BTFIXUP_CALL(__flush_page_to_ram)(addr)
+#define flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(flush_sig_insns)(mm,insn_addr)
+
+extern void sparc_flush_page_to_ram(struct page *page);
+
+#define flush_dcache_page(page)                 sparc_flush_page_to_ram(page)
+#define flush_dcache_mmap_lock(mapping)         do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
+
+#define flush_cache_vmap(start, end)            flush_cache_all()
+#define flush_cache_vunmap(start, end)          flush_cache_all()
+
+#endif /* _SPARC_CACHEFLUSH_H */
diff --git a/arch/sparc/include/asm/cacheflush_64.h b/arch/sparc/include/asm/cacheflush_64.h
new file mode 100644
index 000000000000..c43321729b3b
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush_64.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC64_CACHEFLUSH_H
+#define _SPARC64_CACHEFLUSH_H
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/mm.h>
+
+/* Cache flush operations. */
+
+/* These are the same regardless of whether this is an SMP kernel or not. */
+#define flush_cache_mm(__mm) \
+        do { if ((__mm) == current->mm) flushw_user(); } while(0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+#define flush_cache_range(vma, start, end) \
+        flush_cache_mm((vma)->vm_mm)
+#define flush_cache_page(vma, page, pfn) \
+        flush_cache_mm((vma)->vm_mm)
+
+/*
+ * On spitfire, the icache doesn't snoop local stores and we don't
+ * use block commit stores (which invalidate icache lines) during
+ * module load, so we need this.
+ */
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void __flush_icache_page(unsigned long);
+
+extern void __flush_dcache_page(void *addr, int flush_icache);
+extern void flush_dcache_page_impl(struct page *page);
+#ifdef CONFIG_SMP
+extern void smp_flush_dcache_page_impl(struct page *page, int cpu);
+extern void flush_dcache_page_all(struct mm_struct *mm, struct page *page);
+#else
+#define smp_flush_dcache_page_impl(page,cpu) flush_dcache_page_impl(page)
+#define flush_dcache_page_all(mm,page) flush_dcache_page_impl(page)
+#endif
+
+extern void __flush_dcache_range(unsigned long start, unsigned long end);
+extern void flush_dcache_page(struct page *page);
+
+#define flush_icache_page(vma, pg)      do { } while(0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+
+extern void flush_ptrace_access(struct vm_area_struct *, struct page *,
+                                unsigned long uaddr, void *kaddr,
+                                unsigned long len, int write);
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)              \
+        do {                                                            \
+                flush_cache_page(vma, vaddr, page_to_pfn(page));        \
+                memcpy(dst, src, len);                                  \
+                flush_ptrace_access(vma, page, vaddr, src, len, 0);     \
+        } while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)            \
+        do {                                                            \
+                flush_cache_page(vma, vaddr, page_to_pfn(page));        \
+                memcpy(dst, src, len);                                  \
+                flush_ptrace_access(vma, page, vaddr, dst, len, 1);     \
+        } while (0)
+
+#define flush_dcache_mmap_lock(mapping)         do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
+
+#define flush_cache_vmap(start, end)            do { } while (0)
+#define flush_cache_vunmap(start, end)          do { } while (0)
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+/* internal debugging function */
+void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _SPARC64_CACHEFLUSH_H */
diff --git a/arch/sparc/include/asm/chafsr.h b/arch/sparc/include/asm/chafsr.h
new file mode 100644
index 000000000000..85c69b38220b
--- /dev/null
+++ b/arch/sparc/include/asm/chafsr.h
@@ -0,0 +1,241 @@
+#ifndef _SPARC64_CHAFSR_H
+#define _SPARC64_CHAFSR_H
+
+/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
+
+/* Comments indicate which processor variants on which the bit definition
+ * is valid.  Codes are:
+ * ch   -->     cheetah
+ * ch+  -->     cheetah plus
+ * jp   -->     jalapeno
+ */
+
+/* All bits of this register except M_SYNDROME and E_SYNDROME are
+ * read, write 1 to clear.  M_SYNDROME and E_SYNDROME are read-only.
+ */
+
+/* Software bit set by linux trap handlers to indicate that the trap was
+ * signalled at %tl >= 1.
+ */
+#define CHAFSR_TL1              (1UL << 63UL) /* n/a */
+
+/* Unmapped error from system bus for prefetch queue or
+ * store queue read operation
+ */
+#define CHPAFSR_DTO             (1UL << 59UL) /* ch+ */
+
+/* Bus error from system bus for prefetch queue or store queue
+ * read operation
+ */
+#define CHPAFSR_DBERR           (1UL << 58UL) /* ch+ */
+
+/* Hardware corrected E-cache Tag ECC error */
+#define CHPAFSR_THCE            (1UL << 57UL) /* ch+ */
+/* System interface protocol error, hw timeout caused */
+#define JPAFSR_JETO             (1UL << 57UL) /* jp */
+
+/* SW handled correctable E-cache Tag ECC error */
+#define CHPAFSR_TSCE            (1UL << 56UL) /* ch+ */
+/* Parity error on system snoop results */
+#define JPAFSR_SCE              (1UL << 56UL) /* jp */
+
+/* Uncorrectable E-cache Tag ECC error */
+#define CHPAFSR_TUE             (1UL << 55UL) /* ch+ */
+/* System interface protocol error, illegal command detected */
+#define JPAFSR_JEIC             (1UL << 55UL) /* jp */
+
+/* Uncorrectable system bus data ECC error due to prefetch
+ * or store fill request
+ */
+#define CHPAFSR_DUE             (1UL << 54UL) /* ch+ */
+/* System interface protocol error, illegal ADTYPE detected */
+#define JPAFSR_JEIT             (1UL << 54UL) /* jp */
+
+/* Multiple errors of the same type have occurred.  This bit is set when
+ * an uncorrectable error or a SW correctable error occurs and the status
+ * bit to report that error is already set.  When multiple errors of
+ * different types are indicated by setting multiple status bits.
+ *
+ * This bit is not set if multiple HW corrected errors with the same
+ * status bit occur, only uncorrectable and SW correctable ones have
+ * this behavior.
+ *
+ * This bit is not set when multiple ECC errors happen within a single
+ * 64-byte system bus transaction.  Only the first ECC error in a 16-byte
+ * subunit will be logged.  All errors in subsequent 16-byte subunits
+ * from the same 64-byte transaction are ignored.
+ */
+#define CHAFSR_ME               (1UL << 53UL) /* ch,ch+,jp */
+
+/* Privileged state error has occurred.  This is a capture of PSTATE.PRIV
+ * at the time the error is detected.
+ */
+#define CHAFSR_PRIV             (1UL << 52UL) /* ch,ch+,jp */
+
+/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error
+ * bits and record the most recently detected errors.  Bits accumulate
+ * errors that have been detected since the last write to clear the bit.
+ */
+
+/* System interface protocol error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_PERR             (1UL << 51UL) /* ch,ch+,jp */
+
+/* Internal processor error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_IERR             (1UL << 50UL) /* ch,ch+,jp */
+
+/* System request parity error on incoming address */
+#define CHAFSR_ISAP             (1UL << 49UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus MTAG ECC error */
+#define CHAFSR_EMC              (1UL << 48UL) /* ch,ch+ */
+/* Parity error on L2 cache tag SRAM */
+#define JPAFSR_ETP              (1UL << 48UL) /* jp */
+
+/* Uncorrectable system bus MTAG ECC error */
+#define CHAFSR_EMU              (1UL << 47UL) /* ch,ch+ */
+/* Out of range memory error has occurred */
+#define JPAFSR_OM               (1UL << 47UL) /* jp */
+
+/* HW Corrected system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVC              (1UL << 46UL) /* ch,ch+ */
+/* Error due to unsupported store */
+#define JPAFSR_UMS              (1UL << 46UL) /* jp */
+
+/* Uncorrectable system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVU              (1UL << 45UL) /* ch,ch+,jp */
+
+/* Unmapped error from system bus */
+#define CHAFSR_TO               (1UL << 44UL) /* ch,ch+,jp */
+
+/* Bus error response from system bus */
+#define CHAFSR_BERR             (1UL << 43UL) /* ch,ch+,jp */
+
+/* SW Correctable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCC              (1UL << 42UL) /* ch,ch+,jp */
+
+/* Uncorrectable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCU              (1UL << 41UL) /* ch,ch+,jp */
+
+/* Copyout HW Corrected ECC error */
+#define CHAFSR_CPC              (1UL << 40UL) /* ch,ch+,jp */
+
+/* Copyout Uncorrectable ECC error */
+#define CHAFSR_CPU              (1UL << 39UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for writeback */
+#define CHAFSR_WDC              (1UL << 38UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for writeback */
+#define CHAFSR_WDU              (1UL << 37UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDC              (1UL << 36UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDU              (1UL << 35UL) /* ch,ch+,jp */
+
+/* Uncorrectable system bus data ECC error for read of memory or I/O */
+#define CHAFSR_UE               (1UL << 34UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus data ECC error for read of memory or I/O */
+#define CHAFSR_CE               (1UL << 33UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from remote cache/memory */
+#define JPAFSR_RUE              (1UL << 32UL) /* jp */
+
+/* Correctable ECC error from remote cache/memory */
+#define JPAFSR_RCE              (1UL << 31UL) /* jp */
+
+/* JBUS parity error on returned read data */
+#define JPAFSR_BP               (1UL << 30UL) /* jp */
+
+/* JBUS parity error on data for writeback or block store */
+#define JPAFSR_WBP              (1UL << 29UL) /* jp */
+
+/* Foreign read to DRAM incurring correctable ECC error */
+#define JPAFSR_FRC              (1UL << 28UL) /* jp */
+
+/* Foreign read to DRAM incurring uncorrectable ECC error */
+#define JPAFSR_FRU              (1UL << 27UL) /* jp */
+
+#define CHAFSR_ERRORS           (CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+                                 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+                                 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+                                 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+                                 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define CHPAFSR_ERRORS          (CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \
+                                 CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \
+                                 CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+                                 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+                                 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+                                 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+                                 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define JPAFSR_ERRORS           (JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \
+                                 JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \
+                                 CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \
+                                 JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \
+                                 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \
+                                 CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \
+                                 CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \
+                                 CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \
+                                 JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \
+                                 JPAFSR_FRC | JPAFSR_FRU)
+
+/* Active JBUS request signal when error occurred */
+#define JPAFSR_JBREQ            (0x7UL << 24UL) /* jp */
+#define JPAFSR_JBREQ_SHIFT      24UL
+
+/* L2 cache way information */
+#define JPAFSR_ETW              (0x3UL << 22UL) /* jp */
+#define JPAFSR_ETW_SHIFT        22UL
+
+/* System bus MTAG ECC syndrome.  This field captures the status of the
+ * first occurrence of the highest-priority error according to the M_SYND
+ * overwrite policy.  After the AFSR sticky bit, corresponding to the error
+ * for which the M_SYND is reported, is cleared, the contents of the M_SYND
+ * field will be unchanged by will be unfrozen for further error capture.
+ */
+#define CHAFSR_M_SYNDROME       (0xfUL << 16UL) /* ch,ch+,jp */
+#define CHAFSR_M_SYNDROME_SHIFT 16UL
+
+/* Agenid Id of the foreign device causing the UE/CE errors */
+#define JPAFSR_AID              (0x1fUL << 9UL) /* jp */
+#define JPAFSR_AID_SHIFT        9UL
+
+/* System bus or E-cache data ECC syndrome.  This field captures the status
+ * of the first occurrence of the highest-priority error according to the
+ * E_SYND overwrite policy.  After the AFSR sticky bit, corresponding to the
+ * error for which the E_SYND is reported, is cleare, the contents of the E_SYND
+ * field will be unchanged but will be unfrozen for further error capture.
+ */
+#define CHAFSR_E_SYNDROME       (0x1ffUL << 0UL) /* ch,ch+,jp */
+#define CHAFSR_E_SYNDROME_SHIFT 0UL
+
+/* The AFSR must be explicitly cleared by software, it is not cleared automatically
+ * by a read.  Writes to bits <51:33> with bits set will clear the corresponding
+ * bits in the AFSR.  Bits associated with disrupting traps must be cleared before
+ * interrupts are re-enabled to prevent multiple traps for the same error.  I.e.
+ * PSTATE.IE and AFSR bits control delivery of disrupting traps.
+ *
+ * Since there is only one AFAR, when multiple events have been logged by the
+ * bits in the AFSR, at most one of these events will have its status captured
+ * in the AFAR.  The highest priority of those event bits will get AFAR logging.
+ * The AFAR will be unlocked and available to capture the address of another event
+ * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is
+ * cleared.  For example, if AFSR.CE is detected, then AFSR.UE (which overwrites
+ * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked
+ * and ready for another event, even though AFSR.CE is still set.  The same rules
+ * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR.
+ */
+
+#endif /* _SPARC64_CHAFSR_H */
diff --git a/arch/sparc/include/asm/checksum.h b/arch/sparc/include/asm/checksum.h
new file mode 100644
index 000000000000..7ac0d7497bc5
--- /dev/null
+++ b/arch/sparc/include/asm/checksum.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CHECKSUM_H
+#define ___ASM_SPARC_CHECKSUM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/checksum_64.h>
+#else
+#include <asm/checksum_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/checksum_32.h b/arch/sparc/include/asm/checksum_32.h
new file mode 100644
index 000000000000..bdbda1453aa9
--- /dev/null
+++ b/arch/sparc/include/asm/checksum_32.h
@@ -0,0 +1,241 @@
+#ifndef __SPARC_CHECKSUM_H
+#define __SPARC_CHECKSUM_H
+
+/*  checksum.h:  IP/UDP/TCP checksum routines on the Sparc.
+ *
+ *  Copyright(C) 1995 Linus Torvalds
+ *  Copyright(C) 1995 Miguel de Icaza
+ *  Copyright(C) 1996 David S. Miller
+ *  Copyright(C) 1996 Eddie C. Dost
+ *  Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ *      Alpha checksum c-code
+ *      ix86 inline assembly
+ *      RFC1071 Computing the Internet Checksum
+ */
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/* the same as csum_partial, but copies from fs:src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int __csum_partial_copy_sparc_generic (const unsigned char *, unsigned char *);
+
+static inline __wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
+{
+        register unsigned int ret asm("o0") = (unsigned int)src;
+        register char *d asm("o1") = dst;
+        register int l asm("g1") = len;
+
+        __asm__ __volatile__ (
+                "call __csum_partial_copy_sparc_generic\n\t"
+                " mov %6, %%g7\n"
+        : "=&r" (ret), "=&r" (d), "=&r" (l)
+        : "0" (ret), "1" (d), "2" (l), "r" (sum)
+        : "o2", "o3", "o4", "o5", "o7",
+          "g2", "g3", "g4", "g5", "g7",
+          "memory", "cc");
+        return (__force __wsum)ret;
+}
+
+static inline __wsum
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+                            __wsum sum, int *err)
+  {
+        register unsigned long ret asm("o0") = (unsigned long)src;
+        register char *d asm("o1") = dst;
+        register int l asm("g1") = len;
+        register __wsum s asm("g7") = sum;
+
+        __asm__ __volatile__ (
+        ".section __ex_table,#alloc\n\t"
+        ".align 4\n\t"
+        ".word 1f,2\n\t"
+        ".previous\n"
+        "1:\n\t"
+        "call __csum_partial_copy_sparc_generic\n\t"
+        " st %8, [%%sp + 64]\n"
+        : "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+        : "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+        : "o2", "o3", "o4", "o5", "o7", "g2", "g3", "g4", "g5",
+          "cc", "memory");
+        return (__force __wsum)ret;
+}
+
+static inline __wsum
+csum_partial_copy_to_user(const void *src, void __user *dst, int len,
+                          __wsum sum, int *err)
+{
+        if (!access_ok (VERIFY_WRITE, dst, len)) {
+                *err = -EFAULT;
+                return sum;
+        } else {
+                register unsigned long ret asm("o0") = (unsigned long)src;
+                register char __user *d asm("o1") = dst;
+                register int l asm("g1") = len;
+                register __wsum s asm("g7") = sum;
+
+                __asm__ __volatile__ (
+                ".section __ex_table,#alloc\n\t"
+                ".align 4\n\t"
+                ".word 1f,1\n\t"
+                ".previous\n"
+                "1:\n\t"
+                "call __csum_partial_copy_sparc_generic\n\t"
+                " st %8, [%%sp + 64]\n"
+                : "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+                : "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+                : "o2", "o3", "o4", "o5", "o7",
+                  "g2", "g3", "g4", "g5",
+                  "cc", "memory");
+                return (__force __wsum)ret;
+        }
+}
+
+#define HAVE_CSUM_COPY_USER
+#define csum_and_copy_to_user csum_partial_copy_to_user
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+        __sum16 sum;
+
+        /* Note: We must read %2 before we touch %0 for the first time,
+         *       because GCC can legitimately use the same register for
+         *       both operands.
+         */
+        __asm__ __volatile__("sub\t%2, 4, %%g4\n\t"
+                             "ld\t[%1 + 0x00], %0\n\t"
+                             "ld\t[%1 + 0x04], %%g2\n\t"
+                             "ld\t[%1 + 0x08], %%g3\n\t"
+                             "addcc\t%%g2, %0, %0\n\t"
+                             "addxcc\t%%g3, %0, %0\n\t"
+                             "ld\t[%1 + 0x0c], %%g2\n\t"
+                             "ld\t[%1 + 0x10], %%g3\n\t"
+                             "addxcc\t%%g2, %0, %0\n\t"
+                             "addx\t%0, %%g0, %0\n"
+                             "1:\taddcc\t%%g3, %0, %0\n\t"
+                             "add\t%1, 4, %1\n\t"
+                             "addxcc\t%0, %%g0, %0\n\t"
+                             "subcc\t%%g4, 1, %%g4\n\t"
+                             "be,a\t2f\n\t"
+                             "sll\t%0, 16, %%g2\n\t"
+                             "b\t1b\n\t"
+                             "ld\t[%1 + 0x10], %%g3\n"
+                             "2:\taddcc\t%0, %%g2, %%g2\n\t"
+                             "srl\t%%g2, 16, %0\n\t"
+                             "addx\t%0, %%g0, %0\n\t"
+                             "xnor\t%%g0, %0, %0"
+                             : "=r" (sum), "=&r" (iph)
+                             : "r" (ihl), "1" (iph)
+                             : "g2", "g3", "g4", "cc", "memory");
+        return sum;
+}
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline __sum16 csum_fold(__wsum sum)
+{
+        unsigned int tmp;
+
+        __asm__ __volatile__("addcc\t%0, %1, %1\n\t"
+                             "srl\t%1, 16, %1\n\t"
+                             "addx\t%1, %%g0, %1\n\t"
+                             "xnor\t%%g0, %1, %0"
+                             : "=&r" (sum), "=r" (tmp)
+                             : "0" (sum), "1" ((__force u32)sum<<16)
+                             : "cc");
+        return (__force __sum16)sum;
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+                                               unsigned short len,
+                                               unsigned short proto,
+                                               __wsum sum)
+{
+        __asm__ __volatile__("addcc\t%1, %0, %0\n\t"
+                             "addxcc\t%2, %0, %0\n\t"
+                             "addxcc\t%3, %0, %0\n\t"
+                             "addx\t%0, %%g0, %0\n\t"
+                             : "=r" (sum), "=r" (saddr)
+                             : "r" (daddr), "r" (proto + len), "0" (sum),
+                               "1" (saddr)
+                             : "cc");
+        return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+                                                   unsigned short len,
+                                                   unsigned short proto,
+                                                   __wsum sum)
+{
+        return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+                                      const struct in6_addr *daddr,
+                                      __u32 len, unsigned short proto,
+                                      __wsum sum)
+{
+        __asm__ __volatile__ (
+                "addcc  %3, %4, %%g4\n\t"
+                "addxcc %5, %%g4, %%g4\n\t"
+                "ld     [%2 + 0x0c], %%g2\n\t"
+                "ld     [%2 + 0x08], %%g3\n\t"
+                "addxcc %%g2, %%g4, %%g4\n\t"
+                "ld     [%2 + 0x04], %%g2\n\t"
+                "addxcc %%g3, %%g4, %%g4\n\t"
+                "ld     [%2 + 0x00], %%g3\n\t"
+                "addxcc %%g2, %%g4, %%g4\n\t"
+                "ld     [%1 + 0x0c], %%g2\n\t"
+                "addxcc %%g3, %%g4, %%g4\n\t"
+                "ld     [%1 + 0x08], %%g3\n\t"
+                "addxcc %%g2, %%g4, %%g4\n\t"
+                "ld     [%1 + 0x04], %%g2\n\t"
+                "addxcc %%g3, %%g4, %%g4\n\t"
+                "ld     [%1 + 0x00], %%g3\n\t"
+                "addxcc %%g2, %%g4, %%g4\n\t"
+                "addxcc %%g3, %%g4, %0\n\t"
+                "addx   0, %0, %0\n"
+                : "=&r" (sum)
+                : "r" (saddr), "r" (daddr),
+                  "r"(htonl(len)), "r"(htonl(proto)), "r"(sum)
+                : "g2", "g3", "g4", "cc");
+
+        return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+        return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC_CHECKSUM_H) */
diff --git a/arch/sparc/include/asm/checksum_64.h b/arch/sparc/include/asm/checksum_64.h
new file mode 100644
index 000000000000..019b9615e43c
--- /dev/null
+++ b/arch/sparc/include/asm/checksum_64.h
@@ -0,0 +1,167 @@
+#ifndef __SPARC64_CHECKSUM_H
+#define __SPARC64_CHECKSUM_H
+
+/*  checksum.h:  IP/UDP/TCP checksum routines on the V9.
+ *
+ *  Copyright(C) 1995 Linus Torvalds
+ *  Copyright(C) 1995 Miguel de Icaza
+ *  Copyright(C) 1996 David S. Miller
+ *  Copyright(C) 1996 Eddie C. Dost
+ *  Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ *      Alpha checksum c-code
+ *      ix86 inline assembly
+ *      RFC1071 Computing the Internet Checksum
+ */
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void * buff, int len, __wsum sum);
+
+/* the same as csum_partial, but copies from user space while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+                                              int len, __wsum sum);
+
+extern long __csum_partial_copy_from_user(const void __user *src,
+                                          void *dst, int len,
+                                          __wsum sum);
+
+static inline __wsum
+csum_partial_copy_from_user(const void __user *src,
+                            void *dst, int len,
+                            __wsum sum, int *err)
+{
+        long ret = __csum_partial_copy_from_user(src, dst, len, sum);
+        if (ret < 0)
+                *err = -EFAULT;
+        return (__force __wsum) ret;
+}
+
+/*
+ *      Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern long __csum_partial_copy_to_user(const void *src,
+                                        void __user *dst, int len,
+                                          __wsum sum);
+
+static inline __wsum
+csum_and_copy_to_user(const void *src,
+                      void __user *dst, int len,
+                      __wsum sum, int *err)
+{
+        long ret = __csum_partial_copy_to_user(src, dst, len, sum);
+        if (ret < 0)
+                *err = -EFAULT;
+        return (__force __wsum) ret;
+}
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline __sum16 csum_fold(__wsum sum)
+{
+        unsigned int tmp;
+
+        __asm__ __volatile__(
+"       addcc           %0, %1, %1\n"
+"       srl             %1, 16, %1\n"
+"       addc            %1, %%g0, %1\n"
+"       xnor            %%g0, %1, %0\n"
+        : "=&r" (sum), "=r" (tmp)
+        : "0" (sum), "1" ((__force u32)sum<<16)
+        : "cc");
+        return (__force __sum16)sum;
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+                                               unsigned int len,
+                                               unsigned short proto,
+                                               __wsum sum)
+{
+        __asm__ __volatile__(
+"       addcc           %1, %0, %0\n"
+"       addccc          %2, %0, %0\n"
+"       addccc          %3, %0, %0\n"
+"       addc            %0, %%g0, %0\n"
+        : "=r" (sum), "=r" (saddr)
+        : "r" (daddr), "r" (proto + len), "0" (sum), "1" (saddr)
+        : "cc");
+        return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+                                                   unsigned short len,
+                                                   unsigned short proto,
+                                                   __wsum sum)
+{
+        return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+                                      const struct in6_addr *daddr,
+                                      __u32 len, unsigned short proto,
+                                      __wsum sum)
+{
+        __asm__ __volatile__ (
+"       addcc           %3, %4, %%g7\n"
+"       addccc          %5, %%g7, %%g7\n"
+"       lduw            [%2 + 0x0c], %%g2\n"
+"       lduw            [%2 + 0x08], %%g3\n"
+"       addccc          %%g2, %%g7, %%g7\n"
+"       lduw            [%2 + 0x04], %%g2\n"
+"       addccc          %%g3, %%g7, %%g7\n"
+"       lduw            [%2 + 0x00], %%g3\n"
+"       addccc          %%g2, %%g7, %%g7\n"
+"       lduw            [%1 + 0x0c], %%g2\n"
+"       addccc          %%g3, %%g7, %%g7\n"
+"       lduw            [%1 + 0x08], %%g3\n"
+"       addccc          %%g2, %%g7, %%g7\n"
+"       lduw            [%1 + 0x04], %%g2\n"
+"       addccc          %%g3, %%g7, %%g7\n"
+"       lduw            [%1 + 0x00], %%g3\n"
+"       addccc          %%g2, %%g7, %%g7\n"
+"       addccc          %%g3, %%g7, %0\n"
+"       addc            0, %0, %0\n"
+        : "=&r" (sum)
+        : "r" (saddr), "r" (daddr), "r"(htonl(len)),
+          "r"(htonl(proto)), "r"(sum)
+        : "g2", "g3", "g7", "cc");
+
+        return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+        return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC64_CHECKSUM_H) */
diff --git a/arch/sparc/include/asm/chmctrl.h b/arch/sparc/include/asm/chmctrl.h
new file mode 100644
index 000000000000..859b4a4b0d30
--- /dev/null
+++ b/arch/sparc/include/asm/chmctrl.h
@@ -0,0 +1,183 @@
+#ifndef _SPARC64_CHMCTRL_H
+#define _SPARC64_CHMCTRL_H
+
+/* Cheetah memory controller programmable registers. */
+#define CHMCTRL_TCTRL1          0x00 /* Memory Timing Control I         */
+#define CHMCTRL_TCTRL2          0x08 /* Memory Timing Control II        */
+#define CHMCTRL_TCTRL3          0x38 /* Memory Timing Control III       */
+#define CHMCTRL_TCTRL4          0x40 /* Memory Timing Control IV        */
+#define CHMCTRL_DECODE1         0x10 /* Memory Address Decode I         */
+#define CHMCTRL_DECODE2         0x18 /* Memory Address Decode II        */
+#define CHMCTRL_DECODE3         0x20 /* Memory Address Decode III       */
+#define CHMCTRL_DECODE4         0x28 /* Memory Address Decode IV        */
+#define CHMCTRL_MACTRL          0x30 /* Memory Address Control          */
+
+/* Memory Timing Control I */
+#define TCTRL1_SDRAMCTL_DLY     0xf000000000000000UL
+#define TCTRL1_SDRAMCTL_DLY_SHIFT     60
+#define TCTRL1_SDRAMCLK_DLY     0x0e00000000000000UL
+#define TCTRL1_SDRAMCLK_DLY_SHIFT     57
+#define TCTRL1_R                0x0100000000000000UL
+#define TCTRL1_R_SHIFT                56
+#define TCTRL1_AUTORFR_CYCLE    0x00fe000000000000UL
+#define TCTRL1_AUTORFR_CYCLE_SHIFT    49
+#define TCTRL1_RD_WAIT          0x0001f00000000000UL
+#define TCTRL1_RD_WAIT_SHIFT          44
+#define TCTRL1_PC_CYCLE         0x00000fc000000000UL
+#define TCTRL1_PC_CYCLE_SHIFT         38
+#define TCTRL1_WR_MORE_RAS_PW   0x0000003f00000000UL
+#define TCTRL1_WR_MORE_RAS_PW_SHIFT   32
+#define TCTRL1_RD_MORE_RAW_PW   0x00000000fc000000UL
+#define TCTRL1_RD_MORE_RAS_PW_SHIFT   26
+#define TCTRL1_ACT_WR_DLY       0x0000000003f00000UL
+#define TCTRL1_ACT_WR_DLY_SHIFT       20
+#define TCTRL1_ACT_RD_DLY       0x00000000000fc000UL
+#define TCTRL1_ACT_RD_DLY_SHIFT       14
+#define TCTRL1_BANK_PRESENT     0x0000000000003000UL
+#define TCTRL1_BANK_PRESENT_SHIFT     12
+#define TCTRL1_RFR_INT          0x0000000000000ff8UL
+#define TCTRL1_RFR_INT_SHIFT          3
+#define TCTRL1_SET_MODE_REG     0x0000000000000004UL
+#define TCTRL1_SET_MODE_REG_SHIFT     2
+#define TCTRL1_RFR_ENABLE       0x0000000000000002UL
+#define TCTRL1_RFR_ENABLE_SHIFT       1
+#define TCTRL1_PRECHG_ALL       0x0000000000000001UL
+#define TCTRL1_PRECHG_ALL_SHIFT       0
+
+/* Memory Timing Control II */
+#define TCTRL2_WR_MSEL_DLY      0xfc00000000000000UL
+#define TCTRL2_WR_MSEL_DLY_SHIFT      58
+#define TCTRL2_RD_MSEL_DLY      0x03f0000000000000UL
+#define TCTRL2_RD_MSEL_DLY_SHIFT      52
+#define TCTRL2_WRDATA_THLD      0x000c000000000000UL
+#define TCTRL2_WRDATA_THLD_SHIFT      50
+#define TCTRL2_RDWR_RD_TI_DLY   0x0003f00000000000UL
+#define TCTRL2_RDWR_RD_TI_DLY_SHIFT   44
+#define TCTRL2_AUTOPRECHG_ENBL  0x0000080000000000UL
+#define TCTRL2_AUTOPRECHG_ENBL_SHIFT  43
+#define TCTRL2_RDWR_PI_MORE_DLY 0x000007c000000000UL
+#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38
+#define TCTRL2_RDWR_1_DLY       0x0000003f00000000UL
+#define TCTRL2_RDWR_1_DLY_SHIFT       32
+#define TCTRL2_WRWR_PI_MORE_DLY 0x00000000f8000000UL
+#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27
+#define TCTRL2_WRWR_1_DLY       0x0000000007e00000UL
+#define TCTRL2_WRWR_1_DLY_SHIFT       21
+#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL
+#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL2_R                0x0000000000008000UL
+#define TCTRL2_R_SHIFT                15
+#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* Memory Timing Control III */
+#define TCTRL3_SDRAM_CTL_DLY    0xf000000000000000UL
+#define TCTRL3_SDRAM_CTL_DLY_SHIFT    60
+#define TCTRL3_SDRAM_CLK_DLY    0x0e00000000000000UL
+#define TCTRL3_SDRAM_CLK_DLY_SHIFT    57
+#define TCTRL3_R                0x0100000000000000UL
+#define TCTRL3_R_SHIFT                56
+#define TCTRL3_AUTO_RFR_CYCLE   0x00fe000000000000UL
+#define TCTRL3_AUTO_RFR_CYCLE_SHIFT   49
+#define TCTRL3_RD_WAIT          0x0001f00000000000UL
+#define TCTRL3_RD_WAIT_SHIFT          44
+#define TCTRL3_PC_CYCLE         0x00000fc000000000UL
+#define TCTRL3_PC_CYCLE_SHIFT         38
+#define TCTRL3_WR_MORE_RAW_PW   0x0000003f00000000UL
+#define TCTRL3_WR_MORE_RAW_PW_SHIFT   32
+#define TCTRL3_RD_MORE_RAW_PW   0x00000000fc000000UL
+#define TCTRL3_RD_MORE_RAW_PW_SHIFT   26
+#define TCTRL3_ACT_WR_DLY       0x0000000003f00000UL
+#define TCTRL3_ACT_WR_DLY_SHIFT       20
+#define TCTRL3_ACT_RD_DLY       0x00000000000fc000UL
+#define TCTRL3_ACT_RD_DLY_SHIFT       14
+#define TCTRL3_BANK_PRESENT     0x0000000000003000UL
+#define TCTRL3_BANK_PRESENT_SHIFT     12
+#define TCTRL3_RFR_INT          0x0000000000000ff8UL
+#define TCTRL3_RFR_INT_SHIFT          3
+#define TCTRL3_SET_MODE_REG     0x0000000000000004UL
+#define TCTRL3_SET_MODE_REG_SHIFT     2
+#define TCTRL3_RFR_ENABLE       0x0000000000000002UL
+#define TCTRL3_RFR_ENABLE_SHIFT       1
+#define TCTRL3_PRECHG_ALL       0x0000000000000001UL
+#define TCTRL3_PRECHG_ALL_SHIFT       0
+
+/* Memory Timing Control IV */
+#define TCTRL4_WR_MSEL_DLY      0xfc00000000000000UL
+#define TCTRL4_WR_MSEL_DLY_SHIFT      58
+#define TCTRL4_RD_MSEL_DLY      0x03f0000000000000UL
+#define TCTRL4_RD_MSEL_DLY_SHIFT      52
+#define TCTRL4_WRDATA_THLD      0x000c000000000000UL
+#define TCTRL4_WRDATA_THLD_SHIFT      50
+#define TCTRL4_RDWR_RD_RI_DLY   0x0003f00000000000UL
+#define TCTRL4_RDWR_RD_RI_DLY_SHIFT   44
+#define TCTRL4_AUTO_PRECHG_ENBL 0x0000080000000000UL
+#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43
+#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL
+#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38
+#define TCTRL4_RD_WR_TI_DLY     0x0000003f00000000UL
+#define TCTRL4_RD_WR_TI_DLY_SHIFT     32
+#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL
+#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27
+#define TCTRL4_WR_WR_TI_DLY     0x0000000007e00000UL
+#define TCTRL4_WR_WR_TI_DLY_SHIFT     21
+#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0
+#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL4_R                0x0000000000008000UL
+#define TCTRL4_R_SHIFT                15
+#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* All 4 memory address decoding registers have the
+ * same layout.
+ */
+#define MEM_DECODE_VALID        0x8000000000000000UL /* Valid */
+#define MEM_DECODE_VALID_SHIFT        63
+#define MEM_DECODE_UK           0x001ffe0000000000UL /* Upper mask */
+#define MEM_DECODE_UK_SHIFT           41
+#define MEM_DECODE_UM           0x0000001ffff00000UL /* Upper match */
+#define MEM_DECODE_UM_SHIFT           20
+#define MEM_DECODE_LK           0x000000000003c000UL /* Lower mask */
+#define MEM_DECODE_LK_SHIFT           14
+#define MEM_DECODE_LM           0x0000000000000f00UL /* Lower match */
+#define MEM_DECODE_LM_SHIFT           8
+
+#define PA_UPPER_BITS           0x000007fffc000000UL
+#define PA_UPPER_BITS_SHIFT     26
+#define PA_LOWER_BITS           0x00000000000003c0UL
+#define PA_LOWER_BITS_SHIFT     6
+
+#define MACTRL_R0                        0x8000000000000000UL
+#define MACTRL_R0_SHIFT                  63
+#define MACTRL_ADDR_LE_PW                0x7000000000000000UL
+#define MACTRL_ADDR_LE_PW_SHIFT          60
+#define MACTRL_CMD_PW                    0x0f00000000000000UL
+#define MACTRL_CMD_PW_SHIFT              56
+#define MACTRL_HALF_MODE_WR_MSEL_DLY     0x00fc000000000000UL
+#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50
+#define MACTRL_HALF_MODE_RD_MSEL_DLY     0x0003f00000000000UL
+#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY   0x00000f0000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY   0x000000e000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37
+#define MACTRL_R1                        0x0000001000000000UL
+#define MACTRL_R1_SHIFT                      36
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32
+#define MACTRL_ENC_INTLV_B3              0x00000000f8000000UL
+#define MACTRL_ENC_INTLV_B3_SHIFT              27
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23
+#define MACTRL_ENC_INTLV_B2              0x00000000007c0000UL
+#define MACTRL_ENC_INTLV_B2_SHIFT              18
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14
+#define MACTRL_ENC_INTLV_B1              0x0000000000003e00UL
+#define MACTRL_ENC_INTLV_B1_SHIFT               9
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT  5
+#define MACTRL_ENC_INTLV_B0              0x000000000000001fUL
+#define MACTRL_ENC_INTLV_B0_SHIFT               0
+
+#endif /* _SPARC64_CHMCTRL_H */
diff --git a/arch/sparc/include/asm/clock.h b/arch/sparc/include/asm/clock.h
new file mode 100644
index 000000000000..2cf99dadec56
--- /dev/null
+++ b/arch/sparc/include/asm/clock.h
@@ -0,0 +1,11 @@
+/*
+ * clock.h:  Definitions for clock operations on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_CLOCK_H
+#define _SPARC_CLOCK_H
+
+/* Foo for now. */
+
+#endif /* !(_SPARC_CLOCK_H) */
diff --git a/arch/sparc/include/asm/cmt.h b/arch/sparc/include/asm/cmt.h
new file mode 100644
index 000000000000..870db5928577
--- /dev/null
+++ b/arch/sparc/include/asm/cmt.h
@@ -0,0 +1,59 @@
+#ifndef _SPARC64_CMT_H
+#define _SPARC64_CMT_H
+
+/* cmt.h: Chip Multi-Threading register definitions
+ *
+ * Copyright (C) 2004 David S. Miller (davem@redhat.com)
+ */
+
+/* ASI_CORE_ID - private */
+#define LP_ID           0x0000000000000010UL
+#define  LP_ID_MAX      0x00000000003f0000UL
+#define  LP_ID_ID       0x000000000000003fUL
+
+/* ASI_INTR_ID - private */
+#define LP_INTR_ID      0x0000000000000000UL
+#define  LP_INTR_ID_ID  0x00000000000003ffUL
+
+/* ASI_CESR_ID - private */
+#define CESR_ID         0x0000000000000040UL
+#define  CESR_ID_ID     0x00000000000000ffUL
+
+/* ASI_CORE_AVAILABLE - shared */
+#define LP_AVAIL        0x0000000000000000UL
+#define  LP_AVAIL_1     0x0000000000000002UL
+#define  LP_AVAIL_0     0x0000000000000001UL
+
+/* ASI_CORE_ENABLE_STATUS - shared */
+#define LP_ENAB_STAT    0x0000000000000010UL
+#define  LP_ENAB_STAT_1 0x0000000000000002UL
+#define  LP_ENAB_STAT_0 0x0000000000000001UL
+
+/* ASI_CORE_ENABLE - shared */
+#define LP_ENAB         0x0000000000000020UL
+#define  LP_ENAB_1      0x0000000000000002UL
+#define  LP_ENAB_0      0x0000000000000001UL
+
+/* ASI_CORE_RUNNING - shared */
+#define LP_RUNNING_RW   0x0000000000000050UL
+#define LP_RUNNING_W1S  0x0000000000000060UL
+#define LP_RUNNING_W1C  0x0000000000000068UL
+#define  LP_RUNNING_1   0x0000000000000002UL
+#define  LP_RUNNING_0   0x0000000000000001UL
+
+/* ASI_CORE_RUNNING_STAT - shared */
+#define LP_RUN_STAT     0x0000000000000058UL
+#define  LP_RUN_STAT_1  0x0000000000000002UL
+#define  LP_RUN_STAT_0  0x0000000000000001UL
+
+/* ASI_XIR_STEERING - shared */
+#define LP_XIR_STEER    0x0000000000000030UL
+#define  LP_XIR_STEER_1 0x0000000000000002UL
+#define  LP_XIR_STEER_0 0x0000000000000001UL
+
+/* ASI_CMT_ERROR_STEERING - shared */
+#define CMT_ER_STEER    0x0000000000000040UL
+#define  CMT_ER_STEER_1 0x0000000000000002UL
+#define  CMT_ER_STEER_0 0x0000000000000001UL
+
+#endif /* _SPARC64_CMT_H */
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
new file mode 100644
index 000000000000..f260b58f5ce9
--- /dev/null
+++ b/arch/sparc/include/asm/compat.h
@@ -0,0 +1,243 @@
+#ifndef _ASM_SPARC64_COMPAT_H
+#define _ASM_SPARC64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ  100
+
+typedef u32             compat_size_t;
+typedef s32             compat_ssize_t;
+typedef s32             compat_time_t;
+typedef s32             compat_clock_t;
+typedef s32             compat_pid_t;
+typedef u16             __compat_uid_t;
+typedef u16             __compat_gid_t;
+typedef u32             __compat_uid32_t;
+typedef u32             __compat_gid32_t;
+typedef u16             compat_mode_t;
+typedef u32             compat_ino_t;
+typedef u16             compat_dev_t;
+typedef s32             compat_off_t;
+typedef s64             compat_loff_t;
+typedef s16             compat_nlink_t;
+typedef u16             compat_ipc_pid_t;
+typedef s32             compat_daddr_t;
+typedef u32             compat_caddr_t;
+typedef __kernel_fsid_t compat_fsid_t;
+typedef s32             compat_key_t;
+typedef s32             compat_timer_t;
+
+typedef s32             compat_int_t;
+typedef s32             compat_long_t;
+typedef s64             compat_s64;
+typedef u32             compat_uint_t;
+typedef u32             compat_ulong_t;
+typedef u64             compat_u64;
+
+struct compat_timespec {
+        compat_time_t   tv_sec;
+        s32             tv_nsec;
+};
+
+struct compat_timeval {
+        compat_time_t   tv_sec;
+        s32             tv_usec;
+};
+
+struct compat_stat {
+        compat_dev_t    st_dev;
+        compat_ino_t    st_ino;
+        compat_mode_t   st_mode;
+        compat_nlink_t  st_nlink;
+        __compat_uid_t  st_uid;
+        __compat_gid_t  st_gid;
+        compat_dev_t    st_rdev;
+        compat_off_t    st_size;
+        compat_time_t   st_atime;
+        compat_ulong_t  st_atime_nsec;
+        compat_time_t   st_mtime;
+        compat_ulong_t  st_mtime_nsec;
+        compat_time_t   st_ctime;
+        compat_ulong_t  st_ctime_nsec;
+        compat_off_t    st_blksize;
+        compat_off_t    st_blocks;
+        u32             __unused4[2];
+};
+
+struct compat_stat64 {
+        unsigned long long      st_dev;
+
+        unsigned long long      st_ino;
+
+        unsigned int    st_mode;
+        unsigned int    st_nlink;
+
+        unsigned int    st_uid;
+        unsigned int    st_gid;
+
+        unsigned long long      st_rdev;
+
+        unsigned char   __pad3[8];
+
+        long long       st_size;
+        unsigned int    st_blksize;
+
+        unsigned char   __pad4[8];
+        unsigned int    st_blocks;
+
+        unsigned int    st_atime;
+        unsigned int    st_atime_nsec;
+
+        unsigned int    st_mtime;
+        unsigned int    st_mtime_nsec;
+
+        unsigned int    st_ctime;
+        unsigned int    st_ctime_nsec;
+
+        unsigned int    __unused4;
+        unsigned int    __unused5;
+};
+
+struct compat_flock {
+        short           l_type;
+        short           l_whence;
+        compat_off_t    l_start;
+        compat_off_t    l_len;
+        compat_pid_t    l_pid;
+        short           __unused;
+};
+
+#define F_GETLK64       12
+#define F_SETLK64       13
+#define F_SETLKW64      14
+
+struct compat_flock64 {
+        short           l_type;
+        short           l_whence;
+        compat_loff_t   l_start;
+        compat_loff_t   l_len;
+        compat_pid_t    l_pid;
+        short           __unused;
+};
+
+struct compat_statfs {
+        int             f_type;
+        int             f_bsize;
+        int             f_blocks;
+        int             f_bfree;
+        int             f_bavail;
+        int             f_files;
+        int             f_ffree;
+        compat_fsid_t   f_fsid;
+        int             f_namelen;      /* SunOS ignores this field. */
+        int             f_frsize;
+        int             f_spare[5];
+};
+
+#define COMPAT_RLIM_INFINITY 0x7fffffff
+
+typedef u32             compat_old_sigset_t;
+
+#define _COMPAT_NSIG            64
+#define _COMPAT_NSIG_BPW        32
+
+typedef u32             compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX        0x7fffffff
+#define COMPAT_LOFF_T_MAX       0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef u32             compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+        return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+        return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+        struct pt_regs *regs = current_thread_info()->kregs;
+        unsigned long usp = regs->u_regs[UREG_I6];
+
+        if (!(test_thread_flag(TIF_32BIT)))
+                usp += STACK_BIAS;
+        else
+                usp &= 0xffffffffUL;
+
+        usp -= len;
+        usp &= ~0x7UL;
+
+        return (void __user *) usp;
+}
+
+struct compat_ipc64_perm {
+        compat_key_t key;
+        __compat_uid32_t uid;
+        __compat_gid32_t gid;
+        __compat_uid32_t cuid;
+        __compat_gid32_t cgid;
+        unsigned short __pad1;
+        compat_mode_t mode;
+        unsigned short __pad2;
+        unsigned short seq;
+        unsigned long __unused1;        /* yes they really are 64bit pads */
+        unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+        struct compat_ipc64_perm sem_perm;
+        unsigned int    __pad1;
+        compat_time_t   sem_otime;
+        unsigned int    __pad2;
+        compat_time_t   sem_ctime;
+        u32             sem_nsems;
+        u32             __unused1;
+        u32             __unused2;
+};
+
+struct compat_msqid64_ds {
+        struct compat_ipc64_perm msg_perm;
+        unsigned int    __pad1;
+        compat_time_t   msg_stime;
+        unsigned int    __pad2;
+        compat_time_t   msg_rtime;
+        unsigned int    __pad3;
+        compat_time_t   msg_ctime;
+        unsigned int    msg_cbytes;
+        unsigned int    msg_qnum;
+        unsigned int    msg_qbytes;
+        compat_pid_t    msg_lspid;
+        compat_pid_t    msg_lrpid;
+        unsigned int    __unused1;
+        unsigned int    __unused2;
+};
+
+struct compat_shmid64_ds {
+        struct compat_ipc64_perm shm_perm;
+        unsigned int    __pad1;
+        compat_time_t   shm_atime;
+        unsigned int    __pad2;
+        compat_time_t   shm_dtime;
+        unsigned int    __pad3;
+        compat_time_t   shm_ctime;
+        compat_size_t   shm_segsz;
+        compat_pid_t    shm_cpid;
+        compat_pid_t    shm_lpid;
+        unsigned int    shm_nattch;
+        unsigned int    __unused1;
+        unsigned int    __unused2;
+};
+
+#endif /* _ASM_SPARC64_COMPAT_H */
diff --git a/arch/sparc/include/asm/compat_signal.h b/arch/sparc/include/asm/compat_signal.h
new file mode 100644
index 000000000000..b759eab9b51c
--- /dev/null
+++ b/arch/sparc/include/asm/compat_signal.h
@@ -0,0 +1,29 @@
+#ifndef _COMPAT_SIGNAL_H
+#define _COMPAT_SIGNAL_H
+
+#include <linux/compat.h>
+#include <asm/signal.h>
+
+#ifdef CONFIG_COMPAT
+struct __new_sigaction32 {
+        unsigned                sa_handler;
+        unsigned int            sa_flags;
+        unsigned                sa_restorer;     /* not used by Linux/SPARC yet */
+        compat_sigset_t         sa_mask;
+};
+
+struct __old_sigaction32 {
+        unsigned                sa_handler;
+        compat_old_sigset_t     sa_mask;
+        unsigned int            sa_flags;
+        unsigned                sa_restorer;     /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack32 {
+        u32                     ss_sp;
+        int                     ss_flags;
+        compat_size_t           ss_size;
+} stack_t32;
+#endif
+
+#endif /* !(_COMPAT_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/contregs.h b/arch/sparc/include/asm/contregs.h
new file mode 100644
index 000000000000..48fa8a4ef357
--- /dev/null
+++ b/arch/sparc/include/asm/contregs.h
@@ -0,0 +1,53 @@
+#ifndef _SPARC_CONTREGS_H
+#define _SPARC_CONTREGS_H
+
+/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
+ *              space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+   4=sun4 (as in sun4 sysmaint student book)
+   c=sun4c (according to davem) */
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
+#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
+#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
+#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
+#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
+#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
+#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
+#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
+#define AC_M_CXR      0x0200        /* shv Context Register                  */
+#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
+#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
+#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
+#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
+#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
+#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
+#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
+#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
+#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
+#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
+#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
+#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
+#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
+#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
+#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
+#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
+
+#endif /* _SPARC_CONTREGS_H */
diff --git a/arch/sparc/include/asm/cpudata.h b/arch/sparc/include/asm/cpudata.h
new file mode 100644
index 000000000000..b5976de7cacd
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CPUDATA_H
+#define ___ASM_SPARC_CPUDATA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cpudata_64.h>
+#else
+#include <asm/cpudata_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/cpudata_32.h b/arch/sparc/include/asm/cpudata_32.h
new file mode 100644
index 000000000000..31d48a0e32c7
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata_32.h
@@ -0,0 +1,27 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org)
+ *
+ * Based on include/asm/cpudata.h and Linux 2.4 smp.h
+ * both (C) David S. Miller.
+ */
+
+#ifndef _SPARC_CPUDATA_H
+#define _SPARC_CPUDATA_H
+
+#include <linux/percpu.h>
+
+typedef struct {
+        unsigned long udelay_val;
+        unsigned long clock_tick;
+        unsigned int multiplier;
+        unsigned int counter;
+        int prom_node;
+        int mid;
+        int next;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
+
+#endif /* _SPARC_CPUDATA_H */
diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
new file mode 100644
index 000000000000..532975ecfe10
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata_64.h
@@ -0,0 +1,240 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_CPUDATA_H
+#define _SPARC64_CPUDATA_H
+
+#include <asm/hypervisor.h>
+#include <asm/asi.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/percpu.h>
+#include <linux/threads.h>
+
+typedef struct {
+        /* Dcache line 1 */
+        unsigned int    __softirq_pending; /* must be 1st, see rtrap.S */
+        unsigned int    __pad0;
+        unsigned long   clock_tick;     /* %tick's per second */
+        unsigned long   __pad;
+        unsigned int    __pad1;
+        unsigned int    __pad2;
+
+        /* Dcache line 2, rarely used */
+        unsigned int    dcache_size;
+        unsigned int    dcache_line_size;
+        unsigned int    icache_size;
+        unsigned int    icache_line_size;
+        unsigned int    ecache_size;
+        unsigned int    ecache_line_size;
+        int             core_id;
+        int             proc_id;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu)         per_cpu(__cpu_data, (__cpu))
+#define local_cpu_data()        __get_cpu_var(__cpu_data)
+
+/* Trap handling code needs to get at a few critical values upon
+ * trap entry and to process TSB misses.  These cannot be in the
+ * per_cpu() area as we really need to lock them into the TLB and
+ * thus make them part of the main kernel image.  As a result we
+ * try to make this as small as possible.
+ *
+ * This is padded out and aligned to 64-bytes to avoid false sharing
+ * on SMP.
+ */
+
+/* If you modify the size of this structure, please update
+ * TRAP_BLOCK_SZ_SHIFT below.
+ */
+struct thread_info;
+struct trap_per_cpu {
+/* D-cache line 1: Basic thread information, cpu and device mondo queues */
+        struct thread_info      *thread;
+        unsigned long           pgd_paddr;
+        unsigned long           cpu_mondo_pa;
+        unsigned long           dev_mondo_pa;
+
+/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
+        unsigned long           resum_mondo_pa;
+        unsigned long           resum_kernel_buf_pa;
+        unsigned long           nonresum_mondo_pa;
+        unsigned long           nonresum_kernel_buf_pa;
+
+/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
+        struct hv_fault_status  fault_info;
+
+/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list.  */
+        unsigned long           cpu_mondo_block_pa;
+        unsigned long           cpu_list_pa;
+        unsigned long           tsb_huge;
+        unsigned long           tsb_huge_temp;
+
+/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size.  */
+        unsigned long           irq_worklist_pa;
+        unsigned int            cpu_mondo_qmask;
+        unsigned int            dev_mondo_qmask;
+        unsigned int            resum_qmask;
+        unsigned int            nonresum_qmask;
+        void                    *hdesc;
+} __attribute__((aligned(64)));
+extern struct trap_per_cpu trap_block[NR_CPUS];
+extern void init_cur_cpu_trap(struct thread_info *);
+extern void setup_tba(void);
+extern int ncpus_probed;
+extern void __init cpu_probe(void);
+extern const struct seq_operations cpuinfo_op;
+
+extern unsigned long real_hard_smp_processor_id(void);
+
+struct cpuid_patch_entry {
+        unsigned int    addr;
+        unsigned int    cheetah_safari[4];
+        unsigned int    cheetah_jbus[4];
+        unsigned int    starfire[4];
+        unsigned int    sun4v[4];
+};
+extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
+
+struct sun4v_1insn_patch_entry {
+        unsigned int    addr;
+        unsigned int    insn;
+};
+extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
+        __sun4v_1insn_patch_end;
+
+struct sun4v_2insn_patch_entry {
+        unsigned int    addr;
+        unsigned int    insns[2];
+};
+extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
+        __sun4v_2insn_patch_end;
+
+#endif /* !(__ASSEMBLY__) */
+
+#define TRAP_PER_CPU_THREAD             0x00
+#define TRAP_PER_CPU_PGD_PADDR          0x08
+#define TRAP_PER_CPU_CPU_MONDO_PA       0x10
+#define TRAP_PER_CPU_DEV_MONDO_PA       0x18
+#define TRAP_PER_CPU_RESUM_MONDO_PA     0x20
+#define TRAP_PER_CPU_RESUM_KBUF_PA      0x28
+#define TRAP_PER_CPU_NONRESUM_MONDO_PA  0x30
+#define TRAP_PER_CPU_NONRESUM_KBUF_PA   0x38
+#define TRAP_PER_CPU_FAULT_INFO         0x40
+#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA 0xc0
+#define TRAP_PER_CPU_CPU_LIST_PA        0xc8
+#define TRAP_PER_CPU_TSB_HUGE           0xd0
+#define TRAP_PER_CPU_TSB_HUGE_TEMP      0xd8
+#define TRAP_PER_CPU_IRQ_WORKLIST_PA    0xe0
+#define TRAP_PER_CPU_CPU_MONDO_QMASK    0xe8
+#define TRAP_PER_CPU_DEV_MONDO_QMASK    0xec
+#define TRAP_PER_CPU_RESUM_QMASK        0xf0
+#define TRAP_PER_CPU_NONRESUM_QMASK     0xf4
+
+#define TRAP_BLOCK_SZ_SHIFT             8
+
+#include <asm/scratchpad.h>
+
+#define __GET_CPUID(REG)                                \
+        /* Spitfire implementation (default). */        \
+661:    ldxa            [%g0] ASI_UPA_CONFIG, REG;      \
+        srlx            REG, 17, REG;                   \
+         and            REG, 0x1f, REG;                 \
+        nop;                                            \
+        .section        .cpuid_patch, "ax";             \
+        /* Instruction location. */                     \
+        .word           661b;                           \
+        /* Cheetah Safari implementation. */            \
+        ldxa            [%g0] ASI_SAFARI_CONFIG, REG;   \
+        srlx            REG, 17, REG;                   \
+        and             REG, 0x3ff, REG;                \
+        nop;                                            \
+        /* Cheetah JBUS implementation. */              \
+        ldxa            [%g0] ASI_JBUS_CONFIG, REG;     \
+        srlx            REG, 17, REG;                   \
+        and             REG, 0x1f, REG;                 \
+        nop;                                            \
+        /* Starfire implementation. */                  \
+        sethi           %hi(0x1fff40000d0 >> 9), REG;   \
+        sllx            REG, 9, REG;                    \
+        or              REG, 0xd0, REG;                 \
+        lduwa           [REG] ASI_PHYS_BYPASS_EC_E, REG;\
+        /* sun4v implementation. */                     \
+        mov             SCRATCHPAD_CPUID, REG;          \
+        ldxa            [REG] ASI_SCRATCHPAD, REG;      \
+        nop;                                            \
+        nop;                                            \
+        .previous;
+
+#ifdef CONFIG_SMP
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)         \
+        __GET_CPUID(TMP)                        \
+        sethi   %hi(trap_block), DEST;          \
+        sllx    TMP, TRAP_BLOCK_SZ_SHIFT, TMP;  \
+        or      DEST, %lo(trap_block), DEST;    \
+        add     DEST, TMP, DEST;                \
+
+/* Clobbers TMP, current address space PGD phys address into DEST.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)           \
+        TRAP_LOAD_TRAP_BLOCK(DEST, TMP)         \
+        ldx     [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)        \
+        TRAP_LOAD_TRAP_BLOCK(DEST, TMP)         \
+        add     DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+/* Clobbers TMP, loads DEST with current thread info pointer.  */
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)         \
+        TRAP_LOAD_TRAP_BLOCK(DEST, TMP)         \
+        ldx     [DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* Given the current thread info pointer in THR, load the per-cpu
+ * area base of the current processor into DEST.  REG1, REG2, and REG3 are
+ * clobbered.
+ *
+ * You absolutely cannot use DEST as a temporary in this code.  The
+ * reason is that traps can happen during execution, and return from
+ * trap will load the fully resolved DEST per-cpu base.  This can corrupt
+ * the calculations done by the macro mid-stream.
+ */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)  \
+        lduh    [THR + TI_CPU], REG1;                   \
+        sethi   %hi(__per_cpu_shift), REG3;             \
+        sethi   %hi(__per_cpu_base), REG2;              \
+        ldx     [REG3 + %lo(__per_cpu_shift)], REG3;    \
+        ldx     [REG2 + %lo(__per_cpu_base)], REG2;     \
+        sllx    REG1, REG3, REG3;                       \
+        add     REG3, REG2, DEST;
+
+#else
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)         \
+        sethi   %hi(trap_block), DEST;          \
+        or      DEST, %lo(trap_block), DEST;    \
+
+/* Uniprocessor versions, we know the cpuid is zero.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)           \
+        TRAP_LOAD_TRAP_BLOCK(DEST, TMP)         \
+        ldx     [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)        \
+        TRAP_LOAD_TRAP_BLOCK(DEST, TMP)         \
+        add     DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)         \
+        TRAP_LOAD_TRAP_BLOCK(DEST, TMP)         \
+        ldx     [DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* No per-cpu areas on uniprocessor, so no need to load DEST.  */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* _SPARC64_CPUDATA_H */
diff --git a/arch/sparc/include/asm/cputime.h b/arch/sparc/include/asm/cputime.h
new file mode 100644
index 000000000000..1a642b81e019
--- /dev/null
+++ b/arch/sparc/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_CPUTIME_H
+#define __SPARC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SPARC_CPUTIME_H */
diff --git a/arch/sparc/include/asm/current.h b/arch/sparc/include/asm/current.h
new file mode 100644
index 000000000000..10a0df55a574
--- /dev/null
+++ b/arch/sparc/include/asm/current.h
@@ -0,0 +1,34 @@
+/* include/asm/current.h
+ *
+ * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ *
+ *  Derived from "include/asm-s390/current.h" by
+ *  Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *  Derived from "include/asm-i386/current.h"
+*/
+#ifndef _SPARC_CURRENT_H
+#define _SPARC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#ifdef CONFIG_SPARC64
+register struct task_struct *current asm("g4");
+#endif
+
+#ifdef CONFIG_SPARC32
+/* We might want to consider using %g4 like sparc64 to shave a few cycles.
+ *
+ * Two stage process (inline + #define) for type-checking.
+ * We also obfuscate get_current() to check if anyone used that by mistake.
+ */
+struct task_struct;
+static inline struct task_struct *__get_current(void)
+{
+        return current_thread_info()->task;
+}
+#define current __get_current()
+#endif
+
+#endif /* !(_SPARC_CURRENT_H) */
diff --git a/arch/sparc/include/asm/cypress.h b/arch/sparc/include/asm/cypress.h
new file mode 100644
index 000000000000..95e9772ea394
--- /dev/null
+++ b/arch/sparc/include/asm/cypress.h
@@ -0,0 +1,79 @@
+/*
+ * cypress.h: Cypress module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_CYPRESS_H
+#define _SPARC_CYPRESS_H
+
+/* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */
+
+/* The MMU control register fields on the Sparc Cypress 604/605 MMU's.
+ *
+ * ---------------------------------------------------------------
+ * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME|
+ * ---------------------------------------------------------------
+ *  31    24 23-22 21-20 19 18-15 14 13  12 11 10  9  8 7-2  1  0
+ *
+ * MCA: MultiChip Access -- Used for configuration of multiple
+ *      CY7C604/605 cache units.
+ * MCM: MultiChip Mask -- Again, for multiple cache unit config.
+ * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings.
+ * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only)
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ * C: Cacheable -- Indicates whether accesses are cacheable while
+ *    the MMU is off.  0=no 1=yes
+ * MR: MemoryReflection -- Indicates whether the bus attached to the
+ *     MBus supports memory reflection. 0=no 1=yes (605 only)
+ * CM: CacheMode -- Indicates whether the cache is operating in write
+ *     through or copy-back mode. 0=write-through 1=copy-back
+ * CL: CacheLock -- Indicates if the entire cache is locked or not.
+ *     0=not-locked 1=locked  (604 only)
+ * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes
+ * NF: NoFault -- Do faults generate traps? 0=yes 1=no
+ * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes
+ */
+
+#define CYPRESS_MCA       0x00c00000
+#define CYPRESS_MCM       0x00300000
+#define CYPRESS_MVALID    0x00080000
+#define CYPRESS_MIDMASK   0x00078000   /* Only on 605 */
+#define CYPRESS_BMODE     0x00004000
+#define CYPRESS_ACENABLE  0x00002000
+#define CYPRESS_MRFLCT    0x00000800   /* Only on 605 */
+#define CYPRESS_CMODE     0x00000400
+#define CYPRESS_CLOCK     0x00000200   /* Only on 604 */
+#define CYPRESS_CENABLE   0x00000100
+#define CYPRESS_NFAULT    0x00000002
+#define CYPRESS_MENABLE   0x00000001
+
+static inline void cypress_flush_page(unsigned long page)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+                             "r" (page), "i" (ASI_M_FLUSH_PAGE));
+}
+
+static inline void cypress_flush_segment(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+                             "r" (addr), "i" (ASI_M_FLUSH_SEG));
+}
+
+static inline void cypress_flush_region(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+                             "r" (addr), "i" (ASI_M_FLUSH_REGION));
+}
+
+static inline void cypress_flush_context(void)
+{
+        __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+                             "i" (ASI_M_FLUSH_CTX));
+}
+
+/* XXX Displacement flushes for buggy chips and initial testing
+ * XXX go here.
+ */
+
+#endif /* !(_SPARC_CYPRESS_H) */
diff --git a/arch/sparc/include/asm/dcr.h b/arch/sparc/include/asm/dcr.h
new file mode 100644
index 000000000000..620c9ba642e9
--- /dev/null
+++ b/arch/sparc/include/asm/dcr.h
@@ -0,0 +1,14 @@
+#ifndef _SPARC64_DCR_H
+#define _SPARC64_DCR_H
+
+/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */
+#define DCR_DPE         0x0000000000001000 /* III+: D$ Parity Error Enable      */
+#define DCR_OBS         0x0000000000000fc0 /* Observability Bus Controls        */
+#define DCR_BPE         0x0000000000000020 /* Branch Predict Enable             */
+#define DCR_RPE         0x0000000000000010 /* Return Address Prediction Enable  */
+#define DCR_SI          0x0000000000000008 /* Single Instruction Disable        */
+#define DCR_IPE         0x0000000000000004 /* III+: I$ Parity Error Enable      */
+#define DCR_IFPOE       0x0000000000000002 /* IRQ FP Operation Enable           */
+#define DCR_MS          0x0000000000000001 /* Multi-Scalar dispatch             */
+
+#endif /* _SPARC64_DCR_H */
diff --git a/arch/sparc/include/asm/dcu.h b/arch/sparc/include/asm/dcu.h
new file mode 100644
index 000000000000..0f704e106a1b
--- /dev/null
+++ b/arch/sparc/include/asm/dcu.h
@@ -0,0 +1,27 @@
+#ifndef _SPARC64_DCU_H
+#define _SPARC64_DCU_H
+
+#include <linux/const.h>
+
+/* UltraSparc-III Data Cache Unit Control Register */
+#define DCU_CP  _AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu */
+#define DCU_CV  _AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu */
+#define DCU_ME  _AC(0x0000800000000000,UL) /* NC-store Merging Enable   */
+#define DCU_RE  _AC(0x0000400000000000,UL) /* RAW bypass Enable         */
+#define DCU_PE  _AC(0x0000200000000000,UL) /* PCache Enable             */
+#define DCU_HPE _AC(0x0000100000000000,UL) /* HW prefetch Enable        */
+#define DCU_SPE _AC(0x0000080000000000,UL) /* SW prefetch Enable        */
+#define DCU_SL  _AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/
+#define DCU_WE  _AC(0x0000020000000000,UL) /* WCache enable             */
+#define DCU_PM  _AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask   */
+#define DCU_VM  _AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask   */
+#define DCU_PR  _AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable */
+#define DCU_PW  _AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/
+#define DCU_VR  _AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable */
+#define DCU_VW  _AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/
+#define DCU_DM  _AC(0x0000000000000008,UL) /* DMMU Enable               */
+#define DCU_IM  _AC(0x0000000000000004,UL) /* IMMU Enable               */
+#define DCU_DC  _AC(0x0000000000000002,UL) /* Data Cache Enable         */
+#define DCU_IC  _AC(0x0000000000000001,UL) /* Instruction Cache Enable  */
+
+#endif /* _SPARC64_DCU_H */
diff --git a/arch/sparc/include/asm/delay.h b/arch/sparc/include/asm/delay.h
new file mode 100644
index 000000000000..467caa2a97a0
--- /dev/null
+++ b/arch/sparc/include/asm/delay.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DELAY_H
+#define ___ASM_SPARC_DELAY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/delay_64.h>
+#else
+#include <asm/delay_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/delay_32.h b/arch/sparc/include/asm/delay_32.h
new file mode 100644
index 000000000000..bc9aba2bead6
--- /dev/null
+++ b/arch/sparc/include/asm/delay_32.h
@@ -0,0 +1,34 @@
+/*
+ * delay.h: Linux delay routines on the Sparc.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu).
+ */
+
+#ifndef __SPARC_DELAY_H
+#define __SPARC_DELAY_H
+
+#include <asm/cpudata.h>
+
+static inline void __delay(unsigned long loops)
+{
+        __asm__ __volatile__("cmp %0, 0\n\t"
+                             "1: bne 1b\n\t"
+                             "subcc %0, 1, %0\n" :
+                             "=&r" (loops) :
+                             "0" (loops) :
+                             "cc");
+}
+
+/* This is too messy with inline asm on the Sparc. */
+extern void __udelay(unsigned long usecs, unsigned long lpj);
+extern void __ndelay(unsigned long nsecs, unsigned long lpj);
+
+#ifdef CONFIG_SMP
+#define __udelay_val    cpu_data(smp_processor_id()).udelay_val
+#else /* SMP */
+#define __udelay_val    loops_per_jiffy
+#endif /* SMP */
+#define udelay(__usecs) __udelay(__usecs, __udelay_val)
+#define ndelay(__nsecs) __ndelay(__nsecs, __udelay_val)
+
+#endif /* defined(__SPARC_DELAY_H) */
diff --git a/arch/sparc/include/asm/delay_64.h b/arch/sparc/include/asm/delay_64.h
new file mode 100644
index 000000000000..a77aa622d762
--- /dev/null
+++ b/arch/sparc/include/asm/delay_64.h
@@ -0,0 +1,17 @@
+/* delay.h: Linux delay routines on sparc64.
+ *
+ * Copyright (C) 1996, 2004, 2007 David S. Miller (davem@davemloft.net).
+ */
+
+#ifndef _SPARC64_DELAY_H
+#define _SPARC64_DELAY_H
+
+#ifndef __ASSEMBLY__
+
+extern void __delay(unsigned long loops);
+extern void udelay(unsigned long usecs);
+#define mdelay(n)       udelay((n) * 1000)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _SPARC64_DELAY_H */
diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h
new file mode 100644
index 000000000000..19790eb99cc6
--- /dev/null
+++ b/arch/sparc/include/asm/device.h
@@ -0,0 +1,23 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef _ASM_SPARC_DEVICE_H
+#define _ASM_SPARC_DEVICE_H
+
+struct device_node;
+struct of_device;
+
+struct dev_archdata {
+        void                    *iommu;
+        void                    *stc;
+        void                    *host_controller;
+
+        struct device_node      *prom_node;
+        struct of_device        *op;
+
+        int                     numa_node;
+};
+
+#endif /* _ASM_SPARC_DEVICE_H */
diff --git a/arch/sparc/include/asm/display7seg.h b/arch/sparc/include/asm/display7seg.h
new file mode 100644
index 000000000000..86d4a901df24
--- /dev/null
+++ b/arch/sparc/include/asm/display7seg.h
@@ -0,0 +1,79 @@
+/*
+ *
+ * display7seg - Driver interface for the 7-segment display
+ * present on Sun Microsystems CP1400 and CP1500
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef __display7seg_h__
+#define __display7seg_h__
+
+#define D7S_IOC 'p'
+
+#define D7SIOCRD _IOR(D7S_IOC, 0x45, int)       /* Read device state    */
+#define D7SIOCWR _IOW(D7S_IOC, 0x46, int)       /* Write device state   */
+#define D7SIOCTM _IO (D7S_IOC, 0x47)            /* Translate mode (FLIP)*/
+
+/*
+ * ioctl flag definitions
+ *
+ * POINT        - Toggle decimal point  (0=absent 1=present)
+ * ALARM        - Toggle alarm LED              (0=green  1=red)
+ * FLIP         - Toggle inverted mode  (0=normal 1=flipped)
+ * bits 0-4     - Character displayed   (see definitions below)
+ *
+ * Display segments are defined as follows,
+ * subject to D7S_FLIP register state:
+ *
+ *    a
+ *   ---
+ * f|   |b
+ *   -g-
+ * e|   |c
+ *   ---
+ *    d
+ */
+
+#define D7S_POINT       (1 << 7)        /* Decimal point*/
+#define D7S_ALARM       (1 << 6)        /* Alarm LED    */
+#define D7S_FLIP        (1 << 5)        /* Flip display */
+
+#define D7S_0           0x00            /* Numerals 0-9 */
+#define D7S_1           0x01
+#define D7S_2           0x02
+#define D7S_3           0x03
+#define D7S_4           0x04
+#define D7S_5           0x05
+#define D7S_6           0x06
+#define D7S_7           0x07
+#define D7S_8           0x08
+#define D7S_9           0x09
+#define D7S_A           0x0A            /* Letters A-F, H, L, P */
+#define D7S_B           0x0B
+#define D7S_C           0x0C
+#define D7S_D           0x0D
+#define D7S_E           0x0E
+#define D7S_F           0x0F
+#define D7S_H           0x10
+#define D7S_E2          0x11
+#define D7S_L           0x12
+#define D7S_P           0x13
+#define D7S_SEGA        0x14            /* Individual segments */
+#define D7S_SEGB        0x15
+#define D7S_SEGC        0x16
+#define D7S_SEGD        0x17
+#define D7S_SEGE        0x18
+#define D7S_SEGF        0x19
+#define D7S_SEGG        0x1A
+#define D7S_SEGABFG 0x1B                /* Segment groupings */
+#define D7S_SEGCDEG     0x1C
+#define D7S_SEGBCEF 0x1D
+#define D7S_SEGADG      0x1E
+#define D7S_BLANK       0x1F            /* Clear all segments */
+
+#define D7S_MIN_VAL     0x0
+#define D7S_MAX_VAL     0x1F
+
+#endif /* ifndef __display7seg_h__ */
diff --git a/arch/sparc/include/asm/div64.h b/arch/sparc/include/asm/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/sparc/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..0f4150e26619
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_MAPPING_H
+#define ___ASM_SPARC_DMA_MAPPING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma-mapping_64.h>
+#else
+#include <asm/dma-mapping_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h
new file mode 100644
index 000000000000..f3a641e6b2c8
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping_32.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_SPARC_DMA_MAPPING_H
+#define _ASM_SPARC_DMA_MAPPING_H
+
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif /* PCI */
+
+#endif /* _ASM_SPARC_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma-mapping_64.h b/arch/sparc/include/asm/dma-mapping_64.h
new file mode 100644
index 000000000000..bfa64f9702d5
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping_64.h
@@ -0,0 +1,154 @@
+#ifndef _ASM_SPARC64_DMA_MAPPING_H
+#define _ASM_SPARC64_DMA_MAPPING_H
+
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+
+#define DMA_ERROR_CODE  (~(dma_addr_t)0x0)
+
+struct dma_ops {
+        void *(*alloc_coherent)(struct device *dev, size_t size,
+                                dma_addr_t *dma_handle, gfp_t flag);
+        void (*free_coherent)(struct device *dev, size_t size,
+                              void *cpu_addr, dma_addr_t dma_handle);
+        dma_addr_t (*map_single)(struct device *dev, void *cpu_addr,
+                                 size_t size,
+                                 enum dma_data_direction direction);
+        void (*unmap_single)(struct device *dev, dma_addr_t dma_addr,
+                             size_t size,
+                             enum dma_data_direction direction);
+        int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
+                      enum dma_data_direction direction);
+        void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
+                         int nhwentries,
+                         enum dma_data_direction direction);
+        void (*sync_single_for_cpu)(struct device *dev,
+                                    dma_addr_t dma_handle, size_t size,
+                                    enum dma_data_direction direction);
+        void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
+                                int nelems,
+                                enum dma_data_direction direction);
+};
+extern const struct dma_ops *dma_ops;
+
+extern int dma_supported(struct device *dev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 dma_mask);
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+                                       dma_addr_t *dma_handle, gfp_t flag)
+{
+        return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+                                     void *cpu_addr, dma_addr_t dma_handle)
+{
+        dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+                                        size_t size,
+                                        enum dma_data_direction direction)
+{
+        return dma_ops->map_single(dev, cpu_addr, size, direction);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+                                    size_t size,
+                                    enum dma_data_direction direction)
+{
+        dma_ops->unmap_single(dev, dma_addr, size, direction);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+                                      unsigned long offset, size_t size,
+                                      enum dma_data_direction direction)
+{
+        return dma_ops->map_single(dev, page_address(page) + offset,
+                                   size, direction);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+                                  size_t size,
+                                  enum dma_data_direction direction)
+{
+        dma_ops->unmap_single(dev, dma_address, size, direction);
+}
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+                             int nents, enum dma_data_direction direction)
+{
+        return dma_ops->map_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+                                int nents, enum dma_data_direction direction)
+{
+        dma_ops->unmap_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+                                           dma_addr_t dma_handle, size_t size,
+                                           enum dma_data_direction direction)
+{
+        dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+                                              dma_addr_t dma_handle,
+                                              size_t size,
+                                              enum dma_data_direction direction)
+{
+        /* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+                                                 dma_addr_t dma_handle,
+                                                 unsigned long offset,
+                                                 size_t size,
+                                                 enum dma_data_direction direction)
+{
+        dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+                                                    dma_addr_t dma_handle,
+                                                    unsigned long offset,
+                                                    size_t size,
+                                                    enum dma_data_direction direction)
+{
+        /* No flushing needed to sync cpu writes to the device.  */
+}
+
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+                                       struct scatterlist *sg, int nelems,
+                                       enum dma_data_direction direction)
+{
+        dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+                                          struct scatterlist *sg, int nelems,
+                                          enum dma_data_direction direction)
+{
+        /* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+        return (dma_addr == DMA_ERROR_CODE);
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+        /* no easy way to get cache size on all processors, so return
+         * the maximum possible, to be safe */
+        return (1 << INTERNODE_CACHE_SHIFT);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h) (1)
+
+#endif /* _ASM_SPARC64_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h
new file mode 100644
index 000000000000..aa1d90ac04c5
--- /dev/null
+++ b/arch/sparc/include/asm/dma.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_H
+#define ___ASM_SPARC_DMA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma_64.h>
+#else
+#include <asm/dma_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/dma_32.h b/arch/sparc/include/asm/dma_32.h
new file mode 100644
index 000000000000..cf7189c0079b
--- /dev/null
+++ b/arch/sparc/include/asm/dma_32.h
@@ -0,0 +1,288 @@
+/* include/asm/dma.h
+ *
+ * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/vac-ops.h>  /* for invalidate's, etc. */
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+struct page;
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&dma_spin_lock, flags);
+        return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+        spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define MAX_DMA_ADDRESS  (~0UL)
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR         0x00UL          /* rw  DMA control/status register    0x00   */
+#define DMA_ADDR        0x04UL          /* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT       0x08UL          /* rw  DMA transfer count register    0x08   */
+#define DMA_TEST        0x0cUL          /* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+        dvmarev0,
+        dvmaesc1,
+        dvmarev1,
+        dvmarev2,
+        dvmarev3,
+        dvmarevplus,
+        dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+        struct sbus_dma *next;
+        struct sbus_dev *sdev;
+        void __iomem *regs;
+
+        /* Status, misc info */
+        int node;                /* Prom node for this DMA device */
+        int running;             /* Are we doing DMA now? */
+        int allocated;           /* Are we "owned" by anyone yet? */
+
+        /* Transfer information. */
+        unsigned long addr;      /* Start address of current transfer */
+        int nbytes;              /* Size of current transfer */
+        int realbytes;           /* For splitting up large transfers, etc. */
+
+        /* DMA revision */
+        enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#ifdef CONFIG_SUN4
+/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
+ * Or is rev0 present only on sun4 boxes? -jj */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
+#else
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#endif
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_RST_BPP      DMA_RST_SCSI      /* Reset the BPP controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS     0x000c0000        /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32    0x00040000        /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16    0x00000000        /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI/BPP: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI/BPP: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_BPP_ON       DMA_SCSI_ON       /* Enable BPP dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
+#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
+#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
+#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
+#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
+#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
+#define DMA_BEGINDMA_W(regs) \
+        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
+#define DMA_BEGINDMA_R(regs) \
+        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#if 0   /* P3 this stuff is inline in ledma.c:init_restart_ledma() */
+/* Pause until counter runs out or BIT isn't set in the DMA condition
+ * register.
+ */
+static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
+                                       unsigned long bit)
+{
+        int ctr = 50000;   /* Let's find some bugs ;) */
+
+        /* Busy wait until the bit is not set any more */
+        while((regs->cond_reg&bit) && (ctr>0)) {
+                ctr--;
+                __delay(5);
+        }
+
+        /* Check for bogus outcome. */
+        if(!ctr)
+                panic("DMA timeout");
+}
+
+/* Reset the friggin' thing... */
+#define DMA_RESET(dma) do { \
+        struct sparc_dma_registers *regs = dma->regs;                      \
+        /* Let the current FIFO drain itself */                            \
+        sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
+        /* Reset the logic */                                              \
+        regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
+        __delay(400);                         /* let the bits set ;) */    \
+        regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
+        sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
+        /* Enable FAST transfers if available */                           \
+        if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
+        dma->running = 0;                                                  \
+} while(0)
+#endif
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+extern int get_dma_list(char *);
+extern int request_dma(unsigned int, __const__ char *);
+extern void free_dma(unsigned int);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+
+#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
+#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
+#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
+#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
+BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
+
+#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
+#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
+#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
+
+#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h
new file mode 100644
index 000000000000..46a8aecffc02
--- /dev/null
+++ b/arch/sparc/include/asm/dma_64.h
@@ -0,0 +1,205 @@
+/*
+ * include/asm/dma.h
+ *
+ * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _ASM_SPARC64_DMA_H
+#define _ASM_SPARC64_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+#define MAX_DMA_ADDRESS  (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR         0x00UL          /* rw  DMA control/status register    0x00   */
+#define DMA_ADDR        0x04UL          /* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT       0x08UL          /* rw  DMA transfer count register    0x08   */
+#define DMA_TEST        0x0cUL          /* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+        dvmarev0,
+        dvmaesc1,
+        dvmarev1,
+        dvmarev2,
+        dvmarev3,
+        dvmarevplus,
+        dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+        struct sbus_dma *next;
+        struct sbus_dev *sdev;
+        void __iomem *regs;
+
+        /* Status, misc info */
+        int node;                /* Prom node for this DMA device */
+        int running;             /* Are we doing DMA now? */
+        int allocated;           /* Are we "owned" by anyone yet? */
+
+        /* Transfer information. */
+        u32 addr;                /* Start address of current transfer */
+        int nbytes;              /* Size of current transfer */
+        int realbytes;           /* For splitting up large transfers, etc. */
+
+        /* DMA revision */
+        enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS     0x000c0000        /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32    0x00040000        /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16    0x00000000        /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
+#define DMA_WRITE_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
+#define DMA_OFF(__regs)         \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp &= ~DMA_ENABLE; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSOFF(__regs)     \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp &= ~DMA_INT_ENAB; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSON(__regs)      \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= DMA_INT_ENAB; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_PUNTFIFO(__regs)    \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= DMA_FIFO_INV; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_SETSTART(__regs, __addr)    \
+        sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
+#define DMA_BEGINDMA_W(__regs)  \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_BEGINDMA_R(__regs)  \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
+        tmp &= ~DMA_ST_WRITE; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/arch/sparc/include/asm/ebus.h b/arch/sparc/include/asm/ebus.h
new file mode 100644
index 000000000000..83a6d16c22e6
--- /dev/null
+++ b/arch/sparc/include/asm/ebus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_EBUS_H
+#define ___ASM_SPARC_EBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ebus_64.h>
+#else
+#include <asm/ebus_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ebus_32.h b/arch/sparc/include/asm/ebus_32.h
new file mode 100644
index 000000000000..29cb7dfc6b79
--- /dev/null
+++ b/arch/sparc/include/asm/ebus_32.h
@@ -0,0 +1,99 @@
+/*
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ *
+ * Adopted for sparc by V. Roganov and G. Raiko.
+ */
+
+#ifndef __SPARC_EBUS_H
+#define __SPARC_EBUS_H
+
+#ifndef _LINUX_IOPORT_H
+#include <linux/ioport.h>
+#endif
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+
+struct linux_ebus_child {
+        struct linux_ebus_child         *next;
+        struct linux_ebus_device        *parent;
+        struct linux_ebus               *bus;
+        struct device_node              *prom_node;
+        struct resource                  resource[PROMREG_MAX];
+        int                              num_addrs;
+        unsigned int                     irqs[PROMINTR_MAX];
+        int                              num_irqs;
+};
+
+struct linux_ebus_device {
+        struct of_device                ofdev;
+        struct linux_ebus_device        *next;
+        struct linux_ebus_child         *children;
+        struct linux_ebus               *bus;
+        struct device_node              *prom_node;
+        struct resource                  resource[PROMREG_MAX];
+        int                              num_addrs;
+        unsigned int                     irqs[PROMINTR_MAX];
+        int                              num_irqs;
+};
+#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
+
+struct linux_ebus {
+        struct of_device                ofdev;
+        struct linux_ebus               *next;
+        struct linux_ebus_device        *devices;
+        struct linux_pbm_info           *parent;
+        struct pci_dev                  *self;
+        struct device_node              *prom_node;
+};
+#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
+
+struct linux_ebus_dma {
+        unsigned int dcsr;
+        unsigned int dacr;
+        unsigned int dbcr;
+};
+
+#define EBUS_DCSR_INT_PEND      0x00000001
+#define EBUS_DCSR_ERR_PEND      0x00000002
+#define EBUS_DCSR_DRAIN         0x00000004
+#define EBUS_DCSR_INT_EN        0x00000010
+#define EBUS_DCSR_RESET         0x00000080
+#define EBUS_DCSR_WRITE         0x00000100
+#define EBUS_DCSR_EN_DMA        0x00000200
+#define EBUS_DCSR_CYC_PEND      0x00000400
+#define EBUS_DCSR_DIAG_RD_DONE  0x00000800
+#define EBUS_DCSR_DIAG_WR_DONE  0x00001000
+#define EBUS_DCSR_EN_CNT        0x00002000
+#define EBUS_DCSR_TC            0x00004000
+#define EBUS_DCSR_DIS_CSR_DRN   0x00010000
+#define EBUS_DCSR_BURST_SZ_MASK 0x000c0000
+#define EBUS_DCSR_BURST_SZ_1    0x00080000
+#define EBUS_DCSR_BURST_SZ_4    0x00000000
+#define EBUS_DCSR_BURST_SZ_8    0x00040000
+#define EBUS_DCSR_BURST_SZ_16   0x000c0000
+#define EBUS_DCSR_DIAG_EN       0x00100000
+#define EBUS_DCSR_DIS_ERR_PEND  0x00400000
+#define EBUS_DCSR_TCI_DIS       0x00800000
+#define EBUS_DCSR_EN_NEXT       0x01000000
+#define EBUS_DCSR_DMA_ON        0x02000000
+#define EBUS_DCSR_A_LOADED      0x04000000
+#define EBUS_DCSR_NA_LOADED     0x08000000
+#define EBUS_DCSR_DEV_ID_MASK   0xf0000000
+
+extern struct linux_ebus                *ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus)                                              \
+        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus)                                      \
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child)                                  \
+        for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC_EBUS_H) */
diff --git a/arch/sparc/include/asm/ebus_64.h b/arch/sparc/include/asm/ebus_64.h
new file mode 100644
index 000000000000..fcc62b97ced5
--- /dev/null
+++ b/arch/sparc/include/asm/ebus_64.h
@@ -0,0 +1,94 @@
+/*
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ * Copyright (C) 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __SPARC64_EBUS_H
+#define __SPARC64_EBUS_H
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+
+struct linux_ebus_child {
+        struct linux_ebus_child         *next;
+        struct linux_ebus_device        *parent;
+        struct linux_ebus               *bus;
+        struct device_node              *prom_node;
+        struct resource                  resource[PROMREG_MAX];
+        int                              num_addrs;
+        unsigned int                     irqs[PROMINTR_MAX];
+        int                              num_irqs;
+};
+
+struct linux_ebus_device {
+        struct of_device                ofdev;
+        struct linux_ebus_device        *next;
+        struct linux_ebus_child         *children;
+        struct linux_ebus               *bus;
+        struct device_node              *prom_node;
+        struct resource                  resource[PROMREG_MAX];
+        int                              num_addrs;
+        unsigned int                     irqs[PROMINTR_MAX];
+        int                              num_irqs;
+};
+#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
+
+struct linux_ebus {
+        struct of_device                ofdev;
+        struct linux_ebus               *next;
+        struct linux_ebus_device        *devices;
+        struct pci_dev                  *self;
+        int                              index;
+        int                              is_rio;
+        struct device_node              *prom_node;
+};
+#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
+
+struct ebus_dma_info {
+        spinlock_t      lock;
+        void __iomem    *regs;
+
+        unsigned int    flags;
+#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER         0x00000001
+#define EBUS_DMA_FLAG_TCI_DISABLE               0x00000002
+
+        /* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is
+         * set.
+         */
+        void (*callback)(struct ebus_dma_info *p, int event, void *cookie);
+        void *client_cookie;
+        unsigned int    irq;
+#define EBUS_DMA_EVENT_ERROR    1
+#define EBUS_DMA_EVENT_DMA      2
+#define EBUS_DMA_EVENT_DEVICE   4
+
+        unsigned char   name[64];
+};
+
+extern int ebus_dma_register(struct ebus_dma_info *p);
+extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on);
+extern void ebus_dma_unregister(struct ebus_dma_info *p);
+extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr,
+                            size_t len);
+extern void ebus_dma_prepare(struct ebus_dma_info *p, int write);
+extern unsigned int ebus_dma_residue(struct ebus_dma_info *p);
+extern unsigned int ebus_dma_addr(struct ebus_dma_info *p);
+extern void ebus_dma_enable(struct ebus_dma_info *p, int on);
+
+extern struct linux_ebus                *ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus)                                              \
+        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus)                                      \
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child)                                  \
+        for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC64_EBUS_H) */
diff --git a/arch/sparc/include/asm/ecc.h b/arch/sparc/include/asm/ecc.h
new file mode 100644
index 000000000000..ccb84b66fef1
--- /dev/null
+++ b/arch/sparc/include/asm/ecc.h
@@ -0,0 +1,122 @@
+/*
+ * ecc.h: Definitions and defines for the external cache/memory
+ *        controller on the sun4m.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ECC_H
+#define _SPARC_ECC_H
+
+/* These registers are accessed through the SRMMU passthrough ASI 0x20 */
+#define ECC_ENABLE     0x00000000       /* ECC enable register */
+#define ECC_FSTATUS    0x00000008       /* ECC fault status register */
+#define ECC_FADDR      0x00000010       /* ECC fault address register */
+#define ECC_DIGNOSTIC  0x00000018       /* ECC diagnostics register */
+#define ECC_MBAENAB    0x00000020       /* MBus arbiter enable register */
+#define ECC_DMESG      0x00001000       /* Diagnostic message passing area */
+
+/* ECC MBus Arbiter Enable register:
+ *
+ * ----------------------------------------
+ * |              |SBUS|MOD3|MOD2|MOD1|RSV|
+ * ----------------------------------------
+ *  31           5   4   3    2    1    0
+ *
+ * SBUS: Enable MBus Arbiter on the SBus 0=off 1=on
+ * MOD3: Enable MBus Arbiter on MBus module 3  0=off 1=on
+ * MOD2: Enable MBus Arbiter on MBus module 2  0=off 1=on
+ * MOD1: Enable MBus Arbiter on MBus module 1  0=off 1=on
+ */
+
+#define ECC_MBAE_SBUS     0x00000010
+#define ECC_MBAE_MOD3     0x00000008
+#define ECC_MBAE_MOD2     0x00000004
+#define ECC_MBAE_MOD1     0x00000002 
+
+/* ECC Fault Control Register layout:
+ *
+ * -----------------------------
+ * |    RESV   | ECHECK | EINT |
+ * -----------------------------
+ *  31        2     1       0
+ *
+ * ECHECK:  Enable ECC checking.  0=off 1=on
+ * EINT:  Enable Interrupts for correctable errors. 0=off 1=on
+ */ 
+#define ECC_FCR_CHECK    0x00000002
+#define ECC_FCR_INTENAB  0x00000001
+
+/* ECC Fault Address Register Zero layout:
+ *
+ * -----------------------------------------------------
+ * | MID | S | RSV |  VA   | BM |AT| C| SZ |TYP| PADDR |
+ * -----------------------------------------------------
+ *  31-28  27 26-22  21-14   13  12 11 10-8 7-4   3-0
+ *
+ * MID: ModuleID of the faulting processor. ie. who did it?
+ * S: Supervisor/Privileged access? 0=no 1=yes
+ * VA: Bits 19-12 of the virtual faulting address, these are the
+ *     superset bits in the virtual cache and can be used for
+ *     a flush operation if necessary.
+ * BM: Boot mode? 0=no 1=yes  This is just like the SRMMU boot
+ *     mode bit.
+ * AT: Did this fault happen during an atomic instruction? 0=no
+ *     1=yes.  This means either an 'ldstub' or 'swap' instruction
+ *     was in progress (but not finished) when this fault happened.
+ *     This indicated whether the bus was locked when the fault
+ *     occurred.
+ * C: Did the pte for this access indicate that it was cacheable?
+ *    0=no 1=yes
+ * SZ: The size of the transaction.
+ * TYP: The transaction type.
+ * PADDR: Bits 35-32 of the physical address for the fault.
+ */
+#define ECC_FADDR0_MIDMASK   0xf0000000
+#define ECC_FADDR0_S         0x08000000
+#define ECC_FADDR0_VADDR     0x003fc000
+#define ECC_FADDR0_BMODE     0x00002000
+#define ECC_FADDR0_ATOMIC    0x00001000
+#define ECC_FADDR0_CACHE     0x00000800
+#define ECC_FADDR0_SIZE      0x00000700
+#define ECC_FADDR0_TYPE      0x000000f0
+#define ECC_FADDR0_PADDR     0x0000000f
+
+/* ECC Fault Address Register One layout:
+ *
+ * -------------------------------------
+ * |          Physical Address 31-0    |
+ * -------------------------------------
+ *  31                               0
+ *
+ * You get the upper 4 bits of the physical address from the
+ * PADDR field in ECC Fault Address Zero register.
+ */
+
+/* ECC Fault Status Register layout:
+ *
+ * ----------------------------------------------
+ * | RESV|C2E|MULT|SYNDROME|DWORD|UNC|TIMEO|BS|C|
+ * ----------------------------------------------
+ *  31-18  17  16    15-8    7-4   3    2    1 0
+ *
+ * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only)
+ * MULT: Multiple errors occurred ;-O 0=no 1=prom_panic(yes)
+ * SYNDROME: Controller is mentally unstable.
+ * DWORD:
+ * UNC: Uncorrectable error.  0=no 1=yes
+ * TIMEO: Timeout occurred. 0=no 1=yes
+ * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only)
+ * C: Correctable error? 0=no 1=yes
+ */
+
+#define ECC_FSR_C2ERR    0x00020000
+#define ECC_FSR_MULT     0x00010000
+#define ECC_FSR_SYND     0x0000ff00
+#define ECC_FSR_DWORD    0x000000f0
+#define ECC_FSR_UNC      0x00000008
+#define ECC_FSR_TIMEO    0x00000004
+#define ECC_FSR_BADSLOT  0x00000002
+#define ECC_FSR_C        0x00000001
+
+#endif /* !(_SPARC_ECC_H) */
diff --git a/arch/sparc/include/asm/eeprom.h b/arch/sparc/include/asm/eeprom.h
new file mode 100644
index 000000000000..e17beeceb405
--- /dev/null
+++ b/arch/sparc/include/asm/eeprom.h
@@ -0,0 +1,9 @@
+/*
+ * eeprom.h:  Definitions for the Sun eeprom.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* The EEPROM and the Mostek Mk48t02 use the same IO address space
+ * for their registers/data areas.  The IDPROM lives here too.
+ */
diff --git a/arch/sparc/include/asm/elf.h b/arch/sparc/include/asm/elf.h
new file mode 100644
index 000000000000..0a2816c50b07
--- /dev/null
+++ b/arch/sparc/include/asm/elf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ELF_H
+#define ___ASM_SPARC_ELF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/elf_64.h>
+#else
+#include <asm/elf_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/elf_32.h b/arch/sparc/include/asm/elf_32.h
new file mode 100644
index 000000000000..d043f80bc2fd
--- /dev/null
+++ b/arch/sparc/include/asm/elf_32.h
@@ -0,0 +1,145 @@
+#ifndef __ASMSPARC_ELF_H
+#define __ASMSPARC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER            13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define R_SPARC_NONE            0
+#define R_SPARC_8               1
+#define R_SPARC_16              2
+#define R_SPARC_32              3
+#define R_SPARC_DISP8           4
+#define R_SPARC_DISP16          5
+#define R_SPARC_DISP32          6
+#define R_SPARC_WDISP30         7
+#define R_SPARC_WDISP22         8
+#define R_SPARC_HI22            9
+#define R_SPARC_22              10
+#define R_SPARC_13              11
+#define R_SPARC_LO10            12
+#define R_SPARC_GOT10           13
+#define R_SPARC_GOT13           14
+#define R_SPARC_GOT22           15
+#define R_SPARC_PC10            16
+#define R_SPARC_PC22            17
+#define R_SPARC_WPLT30          18
+#define R_SPARC_COPY            19
+#define R_SPARC_GLOB_DAT        20
+#define R_SPARC_JMP_SLOT        21
+#define R_SPARC_RELATIVE        22
+#define R_SPARC_UA32            23
+#define R_SPARC_PLT32           24
+#define R_SPARC_HIPLT22         25
+#define R_SPARC_LOPLT10         26
+#define R_SPARC_PCPLT32         27
+#define R_SPARC_PCPLT22         28
+#define R_SPARC_PCPLT10         29
+#define R_SPARC_10              30
+#define R_SPARC_11              31
+#define R_SPARC_64              32
+#define R_SPARC_OLO10           33
+#define R_SPARC_WDISP16         40
+#define R_SPARC_WDISP19         41
+#define R_SPARC_7               43
+#define R_SPARC_5               44
+#define R_SPARC_6               45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32.  */
+
+#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR       2
+#define HWCAP_SPARC_SWAP        4
+#define HWCAP_SPARC_MULDIV      8
+#define HWCAP_SPARC_V9          16
+#define HWCAP_SPARC_ULTRA3      32
+
+#define CORE_DUMP_USE_REGSET
+
+/* Format is:
+ *      G0 --> G7
+ *      O0 --> O7
+ *      L0 --> L7
+ *      I0 --> I7
+ *      PSR, PC, nPC, Y, WIM, TBR
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG 38
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct {
+        union {
+                unsigned long   pr_regs[32];
+                double          pr_dregs[16];
+        } pr_fr;
+        unsigned long __unused;
+        unsigned long   pr_fsr;
+        unsigned char   pr_qcnt;
+        unsigned char   pr_q_entrysize;
+        unsigned char   pr_en;
+        unsigned int    pr_q[64];
+} elf_fpregset_t;
+
+#include <asm/mbus.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_SPARC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH        EM_SPARC
+#define ELF_CLASS       ELFCLASS32
+#define ELF_DATA        ELFDATA2MSB
+
+#define USE_ELF_CORE_DUMP
+#ifndef CONFIG_SUN4
+#define ELF_EXEC_PAGESIZE       4096
+#else
+#define ELF_EXEC_PAGESIZE       8192
+#endif
+
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (TASK_UNMAPPED_BASE)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This can NOT be done in userspace
+   on Sparc.  */
+
+/* Sun4c has none of the capabilities, most sun4m's have them all.
+ * XXX This is gross, set some global variable at boot time. -DaveM
+ */
+#define ELF_HWCAP       ((ARCH_SUN4C_SUN4) ? 0 : \
+                         (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \
+                          HWCAP_SPARC_SWAP | \
+                          ((srmmu_modtype != Cypress && \
+                            srmmu_modtype != Cypress_vE && \
+                            srmmu_modtype != Cypress_vD) ? \
+                           HWCAP_SPARC_MULDIV : 0)))
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM    (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif /* !(__ASMSPARC_ELF_H) */
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
new file mode 100644
index 000000000000..0818a1308f4e
--- /dev/null
+++ b/arch/sparc/include/asm/elf_64.h
@@ -0,0 +1,217 @@
+#ifndef __ASM_SPARC64_ELF_H
+#define __ASM_SPARC64_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/spitfire.h>
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER            13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define R_SPARC_NONE            0
+#define R_SPARC_8               1
+#define R_SPARC_16              2
+#define R_SPARC_32              3
+#define R_SPARC_DISP8           4
+#define R_SPARC_DISP16          5
+#define R_SPARC_DISP32          6
+#define R_SPARC_WDISP30         7
+#define R_SPARC_WDISP22         8
+#define R_SPARC_HI22            9
+#define R_SPARC_22              10
+#define R_SPARC_13              11
+#define R_SPARC_LO10            12
+#define R_SPARC_GOT10           13
+#define R_SPARC_GOT13           14
+#define R_SPARC_GOT22           15
+#define R_SPARC_PC10            16
+#define R_SPARC_PC22            17
+#define R_SPARC_WPLT30          18
+#define R_SPARC_COPY            19
+#define R_SPARC_GLOB_DAT        20
+#define R_SPARC_JMP_SLOT        21
+#define R_SPARC_RELATIVE        22
+#define R_SPARC_UA32            23
+#define R_SPARC_PLT32           24
+#define R_SPARC_HIPLT22         25
+#define R_SPARC_LOPLT10         26
+#define R_SPARC_PCPLT32         27
+#define R_SPARC_PCPLT22         28
+#define R_SPARC_PCPLT10         29
+#define R_SPARC_10              30
+#define R_SPARC_11              31
+#define R_SPARC_64              32
+#define R_SPARC_OLO10           33
+#define R_SPARC_WDISP16         40
+#define R_SPARC_WDISP19         41
+#define R_SPARC_7               43
+#define R_SPARC_5               44
+#define R_SPARC_6               45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32.  */
+
+#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR       2
+#define HWCAP_SPARC_SWAP        4
+#define HWCAP_SPARC_MULDIV      8
+#define HWCAP_SPARC_V9          16
+#define HWCAP_SPARC_ULTRA3      32
+#define HWCAP_SPARC_BLKINIT     64
+#define HWCAP_SPARC_N2          128
+
+#define CORE_DUMP_USE_REGSET
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH                EM_SPARCV9
+#define ELF_CLASS               ELFCLASS64
+#define ELF_DATA                ELFDATA2MSB
+
+/* Format of 64-bit elf_gregset_t is:
+ *      G0 --> G7
+ *      O0 --> O7
+ *      L0 --> L7
+ *      I0 --> I7
+ *      TSTATE
+ *      TPC
+ *      TNPC
+ *      Y
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG 36
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct {
+        unsigned long   pr_regs[32];
+        unsigned long   pr_fsr;
+        unsigned long   pr_gsr;
+        unsigned long   pr_fprs;
+} elf_fpregset_t;
+
+/* Format of 32-bit elf_gregset_t is:
+ *      G0 --> G7
+ *      O0 --> O7
+ *      L0 --> L7
+ *      I0 --> I7
+ *      PSR, PC, nPC, Y, WIM, TBR
+ */
+typedef unsigned int compat_elf_greg_t;
+#define COMPAT_ELF_NGREG 38
+typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
+
+typedef struct {
+        union {
+                unsigned int    pr_regs[32];
+                unsigned long   pr_dregs[16];
+        } pr_fr;
+        unsigned int __unused;
+        unsigned int    pr_fsr;
+        unsigned char   pr_qcnt;
+        unsigned char   pr_q_entrysize;
+        unsigned char   pr_en;
+        unsigned int    pr_q[64];
+} compat_elf_fpregset_t;
+
+/* UltraSparc extensions.  Still unused, but will be eventually.  */
+typedef struct {
+        unsigned int pr_type;
+        unsigned int pr_align;
+        union {
+                struct {
+                        union {
+                                unsigned int    pr_regs[32];
+                                unsigned long   pr_dregs[16];
+                                long double     pr_qregs[8];
+                        } pr_xfr;
+                } pr_v8p;
+                unsigned int    pr_xfsr;
+                unsigned int    pr_fprs;
+                unsigned int    pr_xg[8];
+                unsigned int    pr_xo[8];
+                unsigned long   pr_tstate;
+                unsigned int    pr_filler[8];
+        } pr_un;
+} elf_xregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)               ((x)->e_machine == ELF_ARCH)
+#define compat_elf_check_arch(x)        ((x)->e_machine == EM_SPARC || \
+                                         (x)->e_machine == EM_SPARC32PLUS)
+#define compat_start_thread             start_thread32
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE       PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0x0000010000000000UL
+#define COMPAT_ELF_ET_DYN_BASE  0x0000000070000000UL
+
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+/* On Ultra, we support all of the v8 capabilities. */
+static inline unsigned int sparc64_elf_hwcap(void)
+{
+        unsigned int cap = (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR |
+                            HWCAP_SPARC_SWAP | HWCAP_SPARC_MULDIV |
+                            HWCAP_SPARC_V9);
+
+        if (tlb_type == cheetah || tlb_type == cheetah_plus)
+                cap |= HWCAP_SPARC_ULTRA3;
+        else if (tlb_type == hypervisor) {
+                if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 ||
+                    sun4v_chip_type == SUN4V_CHIP_NIAGARA2)
+                        cap |= HWCAP_SPARC_BLKINIT;
+                if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2)
+                        cap |= HWCAP_SPARC_N2;
+        }
+
+        return cap;
+}
+
+#define ELF_HWCAP       sparc64_elf_hwcap();
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM    (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2)                      \
+do {    unsigned long new_flags = current_thread_info()->flags; \
+        new_flags &= _TIF_32BIT;                        \
+        if ((ex).e_ident[EI_CLASS] == ELFCLASS32)       \
+                new_flags |= _TIF_32BIT;                \
+        else                                            \
+                new_flags &= ~_TIF_32BIT;               \
+        if ((current_thread_info()->flags & _TIF_32BIT) \
+            != new_flags)                               \
+                set_thread_flag(TIF_ABI_PENDING);       \
+        else                                            \
+                clear_thread_flag(TIF_ABI_PENDING);     \
+        /* flush_thread will update pgd cache */        \
+        if (ibcs2)                                      \
+                set_personality(PER_SVR4);              \
+        else if (current->personality != PER_LINUX32)   \
+                set_personality(PER_LINUX);             \
+} while (0)
+
+#endif /* !(__ASM_SPARC64_ELF_H) */
diff --git a/arch/sparc/include/asm/emergency-restart.h b/arch/sparc/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..108d8c48e42e
--- /dev/null
+++ b/arch/sparc/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/sparc/include/asm/envctrl.h b/arch/sparc/include/asm/envctrl.h
new file mode 100644
index 000000000000..624fa7e2da8e
--- /dev/null
+++ b/arch/sparc/include/asm/envctrl.h
@@ -0,0 +1,103 @@
+/*
+ *
+ * envctrl.h: Definitions for access to the i2c environment
+ *            monitoring on Ultrasparc systems.
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ * Copyright (C) 2000  Vinh Truong  (vinh.truong@eng.sun.com)
+ * VT - Add all ioctl commands and environment status definitions
+ * VT - Add application note
+ */
+#ifndef _SPARC64_ENVCTRL_H
+#define _SPARC64_ENVCTRL_H 1
+
+#include <linux/ioctl.h>
+
+/* Application note:
+ *
+ * The driver supports 4 operations: open(), close(), ioctl(), read()
+ * The device name is /dev/envctrl.
+ * Below is sample usage:
+ *
+ *      fd = open("/dev/envtrl", O_RDONLY);
+ *      if (ioctl(fd, ENVCTRL_READ_SHUTDOWN_TEMPERATURE, 0) < 0)
+ *              printf("error\n");
+ *      ret = read(fd, buf, 10);
+ *      close(fd);
+ *
+ * Notice in the case of cpu voltage and temperature, the default is
+ * cpu0.  If we need to know the info of cpu1, cpu2, cpu3, we need to
+ * pass in cpu number in ioctl() last parameter.  For example, to
+ * get the voltage of cpu2:
+ *
+ *      ioctlbuf[0] = 2;
+ *      if (ioctl(fd, ENVCTRL_READ_CPU_VOLTAGE, ioctlbuf) < 0)
+ *              printf("error\n");
+ *      ret = read(fd, buf, 10);
+ *
+ * All the return values are in ascii.  So check read return value
+ * and do appropriate conversions in your application.
+ */
+
+/* IOCTL commands */
+
+/* Note: these commands reflect possible monitor features.
+ * Some boards choose to support some of the features only.
+ */
+#define ENVCTRL_RD_CPU_TEMPERATURE      _IOR('p', 0x40, int)
+#define ENVCTRL_RD_CPU_VOLTAGE          _IOR('p', 0x41, int)
+#define ENVCTRL_RD_FAN_STATUS           _IOR('p', 0x42, int)
+#define ENVCTRL_RD_WARNING_TEMPERATURE  _IOR('p', 0x43, int)
+#define ENVCTRL_RD_SHUTDOWN_TEMPERATURE _IOR('p', 0x44, int)
+#define ENVCTRL_RD_VOLTAGE_STATUS       _IOR('p', 0x45, int)
+#define ENVCTRL_RD_SCSI_TEMPERATURE     _IOR('p', 0x46, int)
+#define ENVCTRL_RD_ETHERNET_TEMPERATURE _IOR('p', 0x47, int)
+#define ENVCTRL_RD_MTHRBD_TEMPERATURE   _IOR('p', 0x48, int)
+
+#define ENVCTRL_RD_GLOBALADDRESS        _IOR('p', 0x49, int)
+
+/* Read return values for a voltage status request. */
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD        0x01
+#define ENVCTRL_VOLTAGE_BAD                     0x02
+#define ENVCTRL_POWERSUPPLY_BAD                 0x03
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_BAD         0x04
+
+/* Read return values for a fan status request.
+ * A failure match means either the fan fails or
+ * the fan is not connected.  Some boards have optional
+ * connectors to connect extra fans.
+ *
+ * There are maximum 8 monitor fans.  Some are cpu fans
+ * some are system fans.  The mask below only indicates
+ * fan by order number.
+ * Below is a sample application:
+ *
+ *      if (ioctl(fd, ENVCTRL_READ_FAN_STATUS, 0) < 0) {
+ *              printf("ioctl fan failed\n");
+ *      }
+ *      if (read(fd, rslt, 1) <= 0) {
+ *              printf("error or fan not monitored\n");
+ *      } else {
+ *              if (rslt[0] == ENVCTRL_ALL_FANS_GOOD) {
+ *                      printf("all fans good\n");
+ *      } else if (rslt[0] == ENVCTRL_ALL_FANS_BAD) {
+ *              printf("all fans bad\n");
+ *      } else {
+ *              if (rslt[0] & ENVCTRL_FAN0_FAILURE_MASK) {
+ *                      printf("fan 0 failed or not connected\n");
+ *      }
+ *      ......
+ */
+
+#define ENVCTRL_ALL_FANS_GOOD                   0x00
+#define ENVCTRL_FAN0_FAILURE_MASK               0x01
+#define ENVCTRL_FAN1_FAILURE_MASK               0x02
+#define ENVCTRL_FAN2_FAILURE_MASK               0x04
+#define ENVCTRL_FAN3_FAILURE_MASK               0x08
+#define ENVCTRL_FAN4_FAILURE_MASK               0x10
+#define ENVCTRL_FAN5_FAILURE_MASK               0x20
+#define ENVCTRL_FAN6_FAILURE_MASK               0x40
+#define ENVCTRL_FAN7_FAILURE_MASK               0x80
+#define ENVCTRL_ALL_FANS_BAD                    0xFF
+
+#endif /* !(_SPARC64_ENVCTRL_H) */
diff --git a/arch/sparc/include/asm/errno.h b/arch/sparc/include/asm/errno.h
new file mode 100644
index 000000000000..a9ef172977de
--- /dev/null
+++ b/arch/sparc/include/asm/errno.h
@@ -0,0 +1,113 @@
+#ifndef _SPARC_ERRNO_H
+#define _SPARC_ERRNO_H
+
+/* These match the SunOS error numbering scheme. */
+
+#include <asm-generic/errno-base.h>
+
+#define EWOULDBLOCK     EAGAIN  /* Operation would block */
+#define EINPROGRESS     36      /* Operation now in progress */
+#define EALREADY        37      /* Operation already in progress */
+#define ENOTSOCK        38      /* Socket operation on non-socket */
+#define EDESTADDRREQ    39      /* Destination address required */
+#define EMSGSIZE        40      /* Message too long */
+#define EPROTOTYPE      41      /* Protocol wrong type for socket */
+#define ENOPROTOOPT     42      /* Protocol not available */
+#define EPROTONOSUPPORT 43      /* Protocol not supported */
+#define ESOCKTNOSUPPORT 44      /* Socket type not supported */
+#define EOPNOTSUPP      45      /* Op not supported on transport endpoint */
+#define EPFNOSUPPORT    46      /* Protocol family not supported */
+#define EAFNOSUPPORT    47      /* Address family not supported by protocol */
+#define EADDRINUSE      48      /* Address already in use */
+#define EADDRNOTAVAIL   49      /* Cannot assign requested address */
+#define ENETDOWN        50      /* Network is down */
+#define ENETUNREACH     51      /* Network is unreachable */
+#define ENETRESET       52      /* Net dropped connection because of reset */
+#define ECONNABORTED    53      /* Software caused connection abort */
+#define ECONNRESET      54      /* Connection reset by peer */
+#define ENOBUFS         55      /* No buffer space available */
+#define EISCONN         56      /* Transport endpoint is already connected */
+#define ENOTCONN        57      /* Transport endpoint is not connected */
+#define ESHUTDOWN       58      /* No send after transport endpoint shutdown */
+#define ETOOMANYREFS    59      /* Too many references: cannot splice */
+#define ETIMEDOUT       60      /* Connection timed out */
+#define ECONNREFUSED    61      /* Connection refused */
+#define ELOOP           62      /* Too many symbolic links encountered */
+#define ENAMETOOLONG    63      /* File name too long */
+#define EHOSTDOWN       64      /* Host is down */
+#define EHOSTUNREACH    65      /* No route to host */
+#define ENOTEMPTY       66      /* Directory not empty */
+#define EPROCLIM        67      /* SUNOS: Too many processes */
+#define EUSERS          68      /* Too many users */
+#define EDQUOT          69      /* Quota exceeded */
+#define ESTALE          70      /* Stale NFS file handle */
+#define EREMOTE         71      /* Object is remote */
+#define ENOSTR          72      /* Device not a stream */
+#define ETIME           73      /* Timer expired */
+#define ENOSR           74      /* Out of streams resources */
+#define ENOMSG          75      /* No message of desired type */
+#define EBADMSG         76      /* Not a data message */
+#define EIDRM           77      /* Identifier removed */
+#define EDEADLK         78      /* Resource deadlock would occur */
+#define ENOLCK          79      /* No record locks available */
+#define ENONET          80      /* Machine is not on the network */
+#define ERREMOTE        81      /* SunOS: Too many lvls of remote in path */
+#define ENOLINK         82      /* Link has been severed */
+#define EADV            83      /* Advertise error */
+#define ESRMNT          84      /* Srmount error */
+#define ECOMM           85      /* Communication error on send */
+#define EPROTO          86      /* Protocol error */
+#define EMULTIHOP       87      /* Multihop attempted */
+#define EDOTDOT         88      /* RFS specific error */
+#define EREMCHG         89      /* Remote address changed */
+#define ENOSYS          90      /* Function not implemented */
+
+/* The rest have no SunOS equivalent. */
+#define ESTRPIPE        91      /* Streams pipe error */
+#define EOVERFLOW       92      /* Value too large for defined data type */
+#define EBADFD          93      /* File descriptor in bad state */
+#define ECHRNG          94      /* Channel number out of range */
+#define EL2NSYNC        95      /* Level 2 not synchronized */
+#define EL3HLT          96      /* Level 3 halted */
+#define EL3RST          97      /* Level 3 reset */
+#define ELNRNG          98      /* Link number out of range */
+#define EUNATCH         99      /* Protocol driver not attached */
+#define ENOCSI          100     /* No CSI structure available */
+#define EL2HLT          101     /* Level 2 halted */
+#define EBADE           102     /* Invalid exchange */
+#define EBADR           103     /* Invalid request descriptor */
+#define EXFULL          104     /* Exchange full */
+#define ENOANO          105     /* No anode */
+#define EBADRQC         106     /* Invalid request code */
+#define EBADSLT         107     /* Invalid slot */
+#define EDEADLOCK       108     /* File locking deadlock error */
+#define EBFONT          109     /* Bad font file format */
+#define ELIBEXEC        110     /* Cannot exec a shared library directly */
+#define ENODATA         111     /* No data available */
+#define ELIBBAD         112     /* Accessing a corrupted shared library */
+#define ENOPKG          113     /* Package not installed */
+#define ELIBACC         114     /* Can not access a needed shared library */
+#define ENOTUNIQ        115     /* Name not unique on network */
+#define ERESTART        116     /* Interrupted syscall should be restarted */
+#define EUCLEAN         117     /* Structure needs cleaning */
+#define ENOTNAM         118     /* Not a XENIX named type file */
+#define ENAVAIL         119     /* No XENIX semaphores available */
+#define EISNAM          120     /* Is a named type file */
+#define EREMOTEIO       121     /* Remote I/O error */
+#define EILSEQ          122     /* Illegal byte sequence */
+#define ELIBMAX         123     /* Atmpt to link in too many shared libs */
+#define ELIBSCN         124     /* .lib section in a.out corrupted */
+
+#define ENOMEDIUM       125     /* No medium found */
+#define EMEDIUMTYPE     126     /* Wrong medium type */
+#define ECANCELED       127     /* Operation Cancelled */
+#define ENOKEY          128     /* Required key not available */
+#define EKEYEXPIRED     129     /* Key has expired */
+#define EKEYREVOKED     130     /* Key has been revoked */
+#define EKEYREJECTED    131     /* Key was rejected by service */
+
+/* for robust mutexes */
+#define EOWNERDEAD      132     /* Owner died */
+#define ENOTRECOVERABLE 133     /* State not recoverable */
+
+#endif
diff --git a/arch/sparc/include/asm/estate.h b/arch/sparc/include/asm/estate.h
new file mode 100644
index 000000000000..520c08560d1b
--- /dev/null
+++ b/arch/sparc/include/asm/estate.h
@@ -0,0 +1,49 @@
+#ifndef _SPARC64_ESTATE_H
+#define _SPARC64_ESTATE_H
+
+/* UltraSPARC-III E-cache Error Enable */
+#define ESTATE_ERROR_FMT        0x0000000000040000 /* Force MTAG ECC            */
+#define ESTATE_ERROR_FMESS      0x000000000003c000 /* Forced MTAG ECC val       */
+#define ESTATE_ERROR_FMD        0x0000000000002000 /* Force DATA ECC            */
+#define ESTATE_ERROR_FDECC      0x0000000000001ff0 /* Forced DATA ECC val       */
+#define ESTATE_ERROR_UCEEN      0x0000000000000008 /* See below                 */
+#define ESTATE_ERROR_NCEEN      0x0000000000000002 /* See below                 */
+#define ESTATE_ERROR_CEEN       0x0000000000000001 /* See below                 */
+
+/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache
+ * errors 2) uncorrectable E-cache errors.  Such events only occur on reads
+ * of the E-cache by the local processor for: 1) data loads 2) instruction
+ * fetches 3) atomic operations.  Such events _cannot_ occur for: 1) merge
+ * 2) writeback 2) copyout.  The AFSR bits associated with these traps are
+ * UCC and UCU.
+ */
+
+/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps
+ * for uncorrectable ECC errors and system errors.
+ *
+ * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT,
+ * or system bus BusERR:
+ * 1) As the result of an instruction fetch, will generate instruction_access_error
+ * 2) As the result of a load etc. will generate data_access_error.
+ * 3) As the result of store merge completion, writeback, or copyout will
+ *    generate a disrupting ECC_error trap.
+ * 4) As the result of such errors on instruction vector fetch can generate any
+ *    of the 3 trap types.
+ *
+ * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE,
+ * BERR, and TO.
+ */
+
+/* CEEN enables the ECC_error trap for hardware corrected ECC errors.  System bus
+ * reads resulting in a hardware corrected data or MTAG ECC error will generate an
+ * ECC_error disrupting trap with this bit enabled.
+ *
+ * This same trap will also be generated when a hardware corrected ECC error results
+ * during store merge, writeback, and copyout operations.
+ */
+
+/* In general, if the trap enable bits above are disabled the AFSR bits will still
+ * log the events even though the trap will not be generated by the processor.
+ */
+
+#endif /* _SPARC64_ESTATE_H */
diff --git a/arch/sparc/include/asm/fb.h b/arch/sparc/include/asm/fb.h
new file mode 100644
index 000000000000..b83e44729655
--- /dev/null
+++ b/arch/sparc/include/asm/fb.h
@@ -0,0 +1,29 @@
+#ifndef _SPARC_FB_H_
+#define _SPARC_FB_H_
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+                                unsigned long off)
+{
+#ifdef CONFIG_SPARC64
+        vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+#endif
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+        struct device *dev = info->device;
+        struct device_node *node;
+
+        node = dev->archdata.prom_node;
+        if (node &&
+            node == of_console_device)
+                return 1;
+
+        return 0;
+}
+
+#endif /* _SPARC_FB_H_ */
diff --git a/arch/sparc/include/asm/fbio.h b/arch/sparc/include/asm/fbio.h
new file mode 100644
index 000000000000..b9215a0907d3
--- /dev/null
+++ b/arch/sparc/include/asm/fbio.h
@@ -0,0 +1,330 @@
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE           -1
+#define FBTYPE_SUN1BW           0   /* mono */
+#define FBTYPE_SUN1COLOR        1 
+#define FBTYPE_SUN2BW           2 
+#define FBTYPE_SUN2COLOR        3 
+#define FBTYPE_SUN2GP           4 
+#define FBTYPE_SUN5COLOR        5 
+#define FBTYPE_SUN3COLOR        6 
+#define FBTYPE_MEMCOLOR         7 
+#define FBTYPE_SUN4COLOR        8 
+ 
+#define FBTYPE_NOTSUN1          9 
+#define FBTYPE_NOTSUN2          10
+#define FBTYPE_NOTSUN3          11
+ 
+#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
+#define FBTYPE_SUNROP_COLOR     13
+#define FBTYPE_SUNFB_VIDEO      14
+#define FBTYPE_SUNGIFB          15
+#define FBTYPE_SUNGPLAS         16
+#define FBTYPE_SUNGP3           17
+#define FBTYPE_SUNGT            18
+#define FBTYPE_SUNLEO           19      /* zx Leo card */
+#define FBTYPE_MDICOLOR         20      /* cg14 */
+#define FBTYPE_TCXCOLOR         21      /* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE      21      /* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR          22
+#define FBTYPE_PCI_IGA1682      23
+#define FBTYPE_P9100COLOR       24
+
+#define FBTYPE_PCI_GENERIC      1000
+#define FBTYPE_PCI_MACH64       1001
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct  fbtype {
+        int     fb_type;        /* fb type, see above */
+        int     fb_height;      /* pixels */
+        int     fb_width;       /* pixels */
+        int     fb_depth;
+        int     fb_cmsize;      /* color map entries */
+        int     fb_size;        /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct  fbcmap {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        unsigned char   __user *red;
+        unsigned char   __user *green;
+        unsigned char   __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC    8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES       4
+ 
+struct fbsattr {
+        int     flags;
+        int     emu_type;       /* -1 if none */
+        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+ 
+struct fbgattr {
+        int     real_type;      /* real frame buffer type */
+        int     owner;          /* unknown */
+        struct fbtype fbtype;   /* real frame buffer fbtype */
+        struct fbsattr sattr;   
+        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR  _IOR('F', 6, struct fbgattr) /* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap cmap;     /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        char __user *image;     /* cursor image bits */
+        char __user *mask;      /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
+ 
+/* set/get cursor position */
+#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
+ 
+/* get max cursor size */
+#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8         0
+#define FB_WID_SHARED_24        1
+#define FB_WID_DBL_8            2
+#define FB_WID_DBL_24           3
+        __u32   wa_type;
+        __s32   wa_index;       /* Set on return */
+        __u32   wa_count;       
+};
+struct fb_wid_item {
+        __u32   wi_type;
+        __s32   wi_index;
+        __u32   wi_attrs;
+        __u32   wi_values[32];
+};
+struct fb_wid_list {
+        __u32   wl_flags;
+        __u32   wl_count;
+        struct fb_wid_item      *wl_list;
+};
+
+#define FBIO_WID_ALLOC  _IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE   _IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT    _IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET    _IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL       ('F'<<8)
+#define FFB_SYS_INFO            (FFB_IOCTL|80)
+#define FFB_CLUTREAD            (FFB_IOCTL|81)
+#define FFB_CLUTPOST            (FFB_IOCTL|82)
+#define FFB_SETDIAGMODE         (FFB_IOCTL|83)
+#define FFB_GETMONITORID        (FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE        (FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE        (FFB_IOCTL|86)
+#define FFB_SETSERVER           (FFB_IOCTL|87)
+#define FFB_SETOVCTL            (FFB_IOCTL|88)
+#define FFB_GETOVCTL            (FFB_IOCTL|89)
+#define FFB_GETSAXNUM           (FFB_IOCTL|90)
+#define FFB_FBDEBUG             (FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL          ('M'<<8)
+#define MDI_RESET          (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
+#    define MDI_32_PIX     32
+#    define MDI_16_PIX     16
+#    define MDI_8_PIX      8
+
+struct mdi_cfginfo {
+        int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
+        int     mdi_type;       /* FBTYPE name */
+        int     mdi_height;     /* height */
+        int     mdi_width;      /* widht */
+        int     mdi_size;       /* available ram */
+        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
+        int     mdi_pixfreq;    /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+        __u32   clutid; /* Set on return */
+        __u32   flag;
+        __u32   index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT    0x00000001      /* Not yet implemented */
+        __u32   flag;
+        __u32   clutid;
+        __u32   offset;
+        __u32   count;
+        char *  red;
+        char *  green;
+        char *  blue;
+};
+
+struct fb_clut32 {
+        __u32   flag;
+        __u32   clutid;
+        __u32   offset;
+        __u32   count;
+        __u32   red;
+        __u32   green;
+        __u32   blue;
+};
+
+#define LEO_CLUTALLOC   _IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE    _IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD    _IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST    _IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA    _IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA    _IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC    0x70000000
+#define CG6_TEC    0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC    0x70004000
+#define CG6_THC    0x70005000
+#define CG6_ROM    0x70006000
+#define CG6_RAM    0x70016000
+#define CG6_DHC    0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT             0x00000000
+#define TCX_RAM24BIT            0x01000000
+#define TCX_UNK3                0x10000000
+#define TCX_UNK4                0x20000000
+#define TCX_CONTROLPLANE        0x28000000
+#define TCX_UNK6                0x30000000
+#define TCX_UNK7                0x38000000
+#define TCX_TEC                 0x70000000
+#define TCX_BTREGS              0x70002000
+#define TCX_THC                 0x70004000
+#define TCX_DHC                 0x70008000
+#define TCX_ALT                 0x7000a000
+#define TCX_SYNC                0x7000e000
+#define TCX_UNK2                0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS        0       /* registers */
+#define CG14_CURSORREGS  0x1000  /* cursor registers */
+#define CG14_DACREGS     0x2000  /* DAC registers */
+#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
+#define CG14_CLUT1       0x4000  /* Color Look Up Table */
+#define CG14_CLUT2       0x5000  /* Color Look Up Table */
+#define CG14_CLUT3       0x6000  /* Color Look Up Table */
+#define CG14_AUTO        0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP            0x00000000
+#define LEO_LC_SS0_USR_MAP     0x00800000
+#define LEO_LD_SS0_MAP         0x00801000
+#define LEO_LX_CURSOR_MAP      0x00802000
+#define LEO_SS1_MAP            0x00803000
+#define LEO_LC_SS1_USR_MAP     0x01003000
+#define LEO_LD_SS1_MAP         0x01004000
+#define LEO_UNK_MAP            0x01005000
+#define LEO_LX_KRN_MAP         0x01006000
+#define LEO_LC_SS0_KRN_MAP     0x01007000
+#define LEO_LC_SS1_KRN_MAP     0x01008000
+#define LEO_LD_GBL_MAP         0x01009000
+#define LEO_UNK2_MAP           0x0100a000
+
+#ifdef __KERNEL__
+struct  fbcmap32 {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        u32             red;
+        u32             green;
+        u32             blue;
+};
+
+#define FBIOPUTCMAP32   _IOW('F', 3, struct fbcmap32)
+#define FBIOGETCMAP32   _IOW('F', 4, struct fbcmap32)
+
+struct fbcursor32 {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap32 cmap;   /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        u32     image;          /* cursor image bits */
+        u32     mask;           /* cursor mask bits */
+};
+
+#define FBIOSCURSOR32   _IOW('F', 24, struct fbcursor32)
+#define FBIOGCURSOR32   _IOW('F', 25, struct fbcursor32)
+#endif
+
+#endif /* __LINUX_FBIO_H */
diff --git a/arch/sparc/include/asm/fcntl.h b/arch/sparc/include/asm/fcntl.h
new file mode 100644
index 000000000000..d4d9c9d852c3
--- /dev/null
+++ b/arch/sparc/include/asm/fcntl.h
@@ -0,0 +1,40 @@
+#ifndef _SPARC_FCNTL_H
+#define _SPARC_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_APPEND        0x0008
+#define FASYNC          0x0040  /* fcntl, for BSD compatibility */
+#define O_CREAT         0x0200  /* not fcntl */
+#define O_TRUNC         0x0400  /* not fcntl */
+#define O_EXCL          0x0800  /* not fcntl */
+#define O_SYNC          0x2000
+#define O_NONBLOCK      0x4000
+#if defined(__sparc__) && defined(__arch64__)
+#define O_NDELAY        0x0004
+#else
+#define O_NDELAY        (0x0004 | O_NONBLOCK)
+#endif
+#define O_NOCTTY        0x8000  /* not fcntl */
+#define O_LARGEFILE     0x40000
+#define O_DIRECT        0x100000 /* direct disk access hint */
+#define O_NOATIME       0x200000
+#define O_CLOEXEC       0x400000
+
+#define F_GETOWN        5       /*  for sockets. */
+#define F_SETOWN        6       /*  for sockets. */
+#define F_GETLK         7
+#define F_SETLK         8
+#define F_SETLKW        9
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK         1
+#define F_WRLCK         2
+#define F_UNLCK         3
+
+#define __ARCH_FLOCK_PAD        short __unused;
+#define __ARCH_FLOCK64_PAD      short __unused;
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/sparc/include/asm/fhc.h b/arch/sparc/include/asm/fhc.h
new file mode 100644
index 000000000000..788cbc46a116
--- /dev/null
+++ b/arch/sparc/include/asm/fhc.h
@@ -0,0 +1,121 @@
+/*
+ * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
+ *
+ * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_FHC_H
+#define _SPARC64_FHC_H
+
+#include <linux/timer.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/upa.h>
+
+struct linux_fhc;
+
+/* Clock board register offsets. */
+#define CLOCK_CTRL      0x00UL  /* Main control */
+#define CLOCK_STAT1     0x10UL  /* Status one */
+#define CLOCK_STAT2     0x20UL  /* Status two */
+#define CLOCK_PWRSTAT   0x30UL  /* Power status */
+#define CLOCK_PWRPRES   0x40UL  /* Power presence */
+#define CLOCK_TEMP      0x50UL  /* Temperature */
+#define CLOCK_IRQDIAG   0x60UL  /* IRQ diagnostics */
+#define CLOCK_PWRSTAT2  0x70UL  /* Power status two */
+
+#define CLOCK_CTRL_LLED         0x04    /* Left LED, 0 == on */
+#define CLOCK_CTRL_MLED         0x02    /* Mid LED, 1 == on */
+#define CLOCK_CTRL_RLED         0x01    /* RIght LED, 1 == on */
+
+struct linux_central {
+        struct linux_fhc                *child;
+        unsigned long                   cfreg;
+        unsigned long                   clkregs;
+        unsigned long                   clkver;
+        int                             slots;
+        struct device_node              *prom_node;
+
+        struct linux_prom_ranges        central_ranges[PROMREG_MAX];
+        int                             num_central_ranges;
+};
+
+/* Firehose controller register offsets */
+struct fhc_regs {
+        unsigned long                   pregs;  /* FHC internal regs */
+#define FHC_PREGS_ID    0x00UL  /* FHC ID */
+#define  FHC_ID_VERS            0xf0000000 /* Version of this FHC               */
+#define  FHC_ID_PARTID          0x0ffff000 /* Part ID code (0x0f9f == FHC)      */
+#define  FHC_ID_MANUF           0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/
+#define  FHC_ID_RESV            0x00000001 /* Read as one                       */
+#define FHC_PREGS_RCS   0x10UL  /* FHC Reset Control/Status Register */
+#define  FHC_RCS_POR            0x80000000 /* Last reset was a power cycle      */
+#define  FHC_RCS_SPOR           0x40000000 /* Last reset was sw power on reset  */
+#define  FHC_RCS_SXIR           0x20000000 /* Last reset was sw XIR reset       */
+#define  FHC_RCS_BPOR           0x10000000 /* Last reset was due to POR button  */
+#define  FHC_RCS_BXIR           0x08000000 /* Last reset was due to XIR button  */
+#define  FHC_RCS_WEVENT         0x04000000 /* CPU reset was due to wakeup event */
+#define  FHC_RCS_CFATAL         0x02000000 /* Centerplane Fatal Error signalled */
+#define  FHC_RCS_FENAB          0x01000000 /* Fatal errors elicit system reset  */
+#define FHC_PREGS_CTRL  0x20UL  /* FHC Control Register */
+#define  FHC_CONTROL_ICS        0x00100000 /* Ignore Centerplane Signals        */
+#define  FHC_CONTROL_FRST       0x00080000 /* Fatal Error Reset Enable          */
+#define  FHC_CONTROL_LFAT       0x00040000 /* AC/DC signalled a local error     */
+#define  FHC_CONTROL_SLINE      0x00010000 /* Firmware Synchronization Line     */
+#define  FHC_CONTROL_DCD        0x00008000 /* DC-->DC Converter Disable         */
+#define  FHC_CONTROL_POFF       0x00004000 /* AC/DC Controller PLL Disable      */
+#define  FHC_CONTROL_FOFF       0x00002000 /* FHC Controller PLL Disable        */
+#define  FHC_CONTROL_AOFF       0x00001000 /* CPU A SRAM/SBD Low Power Mode     */
+#define  FHC_CONTROL_BOFF       0x00000800 /* CPU B SRAM/SBD Low Power Mode     */
+#define  FHC_CONTROL_PSOFF      0x00000400 /* Turns off this FHC's power supply */
+#define  FHC_CONTROL_IXIST      0x00000200 /* 0=FHC tells clock board it exists */
+#define  FHC_CONTROL_XMSTR      0x00000100 /* 1=Causes this FHC to be XIR master*/
+#define  FHC_CONTROL_LLED       0x00000040 /* 0=Left LED ON                     */
+#define  FHC_CONTROL_MLED       0x00000020 /* 1=Middle LED ON                   */
+#define  FHC_CONTROL_RLED       0x00000010 /* 1=Right LED                       */
+#define  FHC_CONTROL_BPINS      0x00000003 /* Spare Bidirectional Pins          */
+#define FHC_PREGS_BSR   0x30UL  /* FHC Board Status Register */
+#define  FHC_BSR_DA64           0x00040000 /* Port A: 0=128bit 1=64bit data path */
+#define  FHC_BSR_DB64           0x00020000 /* Port B: 0=128bit 1=64bit data path */
+#define  FHC_BSR_BID            0x0001e000 /* Board ID                           */
+#define  FHC_BSR_SA             0x00001c00 /* Port A UPA Speed (from the pins)   */
+#define  FHC_BSR_SB             0x00000380 /* Port B UPA Speed (from the pins)   */
+#define  FHC_BSR_NDIAG          0x00000040 /* Not in Diag Mode                   */
+#define  FHC_BSR_NTBED          0x00000020 /* Not in TestBED Mode                */
+#define  FHC_BSR_NIA            0x0000001c /* Jumper, bit 18 in PROM space       */
+#define  FHC_BSR_SI             0x00000001 /* Spare input pin value              */
+#define FHC_PREGS_ECC   0x40UL  /* FHC ECC Control Register (16 bits) */
+#define FHC_PREGS_JCTRL 0xf0UL  /* FHC JTAG Control Register */
+#define  FHC_JTAG_CTRL_MENAB    0x80000000 /* Indicates this is JTAG Master      */
+#define  FHC_JTAG_CTRL_MNONE    0x40000000 /* Indicates no JTAG Master present   */
+#define FHC_PREGS_JCMD  0x100UL /* FHC JTAG Command Register */
+        unsigned long                   ireg;   /* FHC IGN reg */
+#define FHC_IREG_IGN    0x00UL  /* This FHC's IGN */
+        unsigned long                   ffregs; /* FHC fanfail regs */
+#define FHC_FFREGS_IMAP 0x00UL  /* FHC Fanfail IMAP */
+#define FHC_FFREGS_ICLR 0x10UL  /* FHC Fanfail ICLR */
+        unsigned long                   sregs;  /* FHC system regs */
+#define FHC_SREGS_IMAP  0x00UL  /* FHC System IMAP */
+#define FHC_SREGS_ICLR  0x10UL  /* FHC System ICLR */
+        unsigned long                   uregs;  /* FHC uart regs */
+#define FHC_UREGS_IMAP  0x00UL  /* FHC Uart IMAP */
+#define FHC_UREGS_ICLR  0x10UL  /* FHC Uart ICLR */
+        unsigned long                   tregs;  /* FHC TOD regs */
+#define FHC_TREGS_IMAP  0x00UL  /* FHC TOD IMAP */
+#define FHC_TREGS_ICLR  0x10UL  /* FHC TOD ICLR */
+};
+
+struct linux_fhc {
+        struct linux_fhc                *next;
+        struct linux_central            *parent;        /* NULL if not central FHC */
+        struct fhc_regs                 fhc_regs;
+        int                             board;
+        int                             jtag_master;
+        struct device_node              *prom_node;
+
+        struct linux_prom_ranges        fhc_ranges[PROMREG_MAX];
+        int                             num_fhc_ranges;
+};
+
+#endif /* !(_SPARC64_FHC_H) */
diff --git a/arch/sparc/include/asm/fixmap.h b/arch/sparc/include/asm/fixmap.h
new file mode 100644
index 000000000000..f18fc0755adf
--- /dev/null
+++ b/arch/sparc/include/asm/fixmap.h
@@ -0,0 +1,110 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the top of unused virtual memory (0xfd000000 - 1 page) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanism,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+        FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+        FIX_KMAP_BEGIN,
+        FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+        __end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+                                        unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+                __set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+                __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between IO pages at 0xfd000000 and
+ * the start of the fixmap.
+ */
+#define FIXADDR_TOP     (0xfcfff000UL)
+#define FIXADDR_SIZE    ((__end_of_fixed_addresses) << PAGE_SHIFT)
+#define FIXADDR_START   (FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)        (FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)        ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+        /*
+         * this branch gets completely eliminated after inlining,
+         * except when someone tries to use fixaddr indices in an
+         * illegal way. (such as mixing up address types or using
+         * out-of-range indices).
+         *
+         * If it doesn't get removed, the linker will complain
+         * loudly with a reasonably clear error message..
+         */
+        if (idx >= __end_of_fixed_addresses)
+                __this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+        BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+        return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/arch/sparc/include/asm/floppy.h b/arch/sparc/include/asm/floppy.h
new file mode 100644
index 000000000000..faebd335b600
--- /dev/null
+++ b/arch/sparc/include/asm/floppy.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FLOPPY_H
+#define ___ASM_SPARC_FLOPPY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/floppy_64.h>
+#else
+#include <asm/floppy_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
new file mode 100644
index 000000000000..ae3f00bf22ff
--- /dev/null
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -0,0 +1,388 @@
+/* asm/floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef __ASM_SPARC_FLOPPY_H
+#define __ASM_SPARC_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/machines.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/irq.h>
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef request_region
+#define release_region(X, Y)    do { } while(0)
+#define request_region(X, Y, Z) (1)
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+        volatile unsigned char status_82072;  /* Main Status reg. */
+#define dcr_82072              status_82072   /* Digital Control reg. */
+#define status1_82077          status_82072   /* Auxiliary Status reg. 1 */
+
+        volatile unsigned char data_82072;    /* Data fifo. */
+#define status2_82077          data_82072     /* Auxiliary Status reg. 2 */
+
+        volatile unsigned char dor_82077;     /* Digital Output reg. */
+        volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
+
+        volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+
+        volatile unsigned char data_82077;    /* Data fifo. */
+        volatile unsigned char ___unused;
+        volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on a SparcStation anyways. */
+static struct sun_flpy_controller *sun_fdc = NULL;
+extern volatile unsigned char *fdc_status;
+
+struct sun_floppy_ops {
+        unsigned char (*fd_inb)(int port);
+        void (*fd_outb)(unsigned char value, int port);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fd_enable_dma()
+#define fd_disable_dma()          sun_fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fd_set_dma_count(count)
+#define fd_enable_irq()           /* nothing... */
+#define fd_disable_irq()          /* nothing... */
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fd_request_irq()
+#define fd_free_irq()             /* nothing... */
+#if 0  /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
+#define fd_dma_mem_alloc(size)    ((unsigned long) vmalloc(size))
+#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
+#endif
+
+/* XXX This isn't really correct. XXX */
+#define get_dma_residue(x)        (0)
+
+#define FLOPPY0_TYPE  4
+#define FLOPPY1_TYPE  0
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FDC1                      sun_floppy_init()
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+/* Routines unique to each controller type on a Sun. */
+static void sun_set_dor(unsigned char value, int fdc_82077)
+{
+        if (sparc_cpu_model == sun4c) {
+                unsigned int bits = 0;
+                if (value & 0x10)
+                        bits |= AUXIO_FLPY_DSEL;
+                if ((value & 0x80) == 0)
+                        bits |= AUXIO_FLPY_EJCT;
+                set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
+        }
+        if (fdc_82077) {
+                sun_fdc->dor_82077 = value;
+        }
+}
+
+static unsigned char sun_read_dir(void)
+{
+        if (sparc_cpu_model == sun4c)
+                return (get_auxio() & AUXIO_FLPY_DCHG) ? 0x80 : 0;
+        else
+                return sun_fdc->dir_82077;
+}
+
+static unsigned char sun_82072_fd_inb(int port)
+{
+        udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to read unknown port %d\n", port);
+                panic("floppy: Port bolixed.");
+        case 4: /* FD_STATUS */
+                return sun_fdc->status_82072 & ~STATUS_DMA;
+        case 5: /* FD_DATA */
+                return sun_fdc->data_82072;
+        case 7: /* FD_DIR */
+                return sun_read_dir();
+        };
+        panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82072_fd_outb(unsigned char value, int port)
+{
+        udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to write to unknown port %d\n", port);
+                panic("floppy: Port bolixed.");
+        case 2: /* FD_DOR */
+                sun_set_dor(value, 0);
+                break;
+        case 5: /* FD_DATA */
+                sun_fdc->data_82072 = value;
+                break;
+        case 7: /* FD_DCR */
+                sun_fdc->dcr_82072 = value;
+                break;
+        case 4: /* FD_STATUS */
+                sun_fdc->status_82072 = value;
+                break;
+        };
+        return;
+}
+
+static unsigned char sun_82077_fd_inb(int port)
+{
+        udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to read unknown port %d\n", port);
+                panic("floppy: Port bolixed.");
+        case 0: /* FD_STATUS_0 */
+                return sun_fdc->status1_82077;
+        case 1: /* FD_STATUS_1 */
+                return sun_fdc->status2_82077;
+        case 2: /* FD_DOR */
+                return sun_fdc->dor_82077;
+        case 3: /* FD_TDR */
+                return sun_fdc->tapectl_82077;
+        case 4: /* FD_STATUS */
+                return sun_fdc->status_82077 & ~STATUS_DMA;
+        case 5: /* FD_DATA */
+                return sun_fdc->data_82077;
+        case 7: /* FD_DIR */
+                return sun_read_dir();
+        };
+        panic("sun_82077_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, int port)
+{
+        udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to write to unknown port %d\n", port);
+                panic("floppy: Port bolixed.");
+        case 2: /* FD_DOR */
+                sun_set_dor(value, 1);
+                break;
+        case 5: /* FD_DATA */
+                sun_fdc->data_82077 = value;
+                break;
+        case 7: /* FD_DCR */
+                sun_fdc->dcr_82077 = value;
+                break;
+        case 4: /* FD_STATUS */
+                sun_fdc->status_82077 = value;
+                break;
+        case 3: /* FD_TDR */
+                sun_fdc->tapectl_82077 = value;
+                break;
+        };
+        return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+extern char *pdma_vaddr;
+extern unsigned long pdma_size;
+extern volatile int doing_pdma;
+
+/* This is software state */
+extern char *pdma_base;
+extern unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static inline void virtual_dma_init(void)
+{
+        /* nothing... */
+}
+
+static inline void sun_fd_disable_dma(void)
+{
+        doing_pdma = 0;
+        if (pdma_base) {
+                mmu_unlockarea(pdma_base, pdma_areasize);
+                pdma_base = NULL;
+        }
+}
+
+static inline void sun_fd_set_dma_mode(int mode)
+{
+        switch(mode) {
+        case DMA_MODE_READ:
+                doing_pdma = 1;
+                break;
+        case DMA_MODE_WRITE:
+                doing_pdma = 2;
+                break;
+        default:
+                printk("Unknown dma mode %d\n", mode);
+                panic("floppy: Giving up...");
+        }
+}
+
+static inline void sun_fd_set_dma_addr(char *buffer)
+{
+        pdma_vaddr = buffer;
+}
+
+static inline void sun_fd_set_dma_count(int length)
+{
+        pdma_size = length;
+}
+
+static inline void sun_fd_enable_dma(void)
+{
+        pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+        pdma_base = pdma_vaddr;
+        pdma_areasize = pdma_size;
+}
+
+/* Our low-level entry point in arch/sparc/kernel/entry.S */
+extern int sparc_floppy_request_irq(int irq, unsigned long flags,
+                                    irq_handler_t irq_handler);
+
+static int sun_fd_request_irq(void)
+{
+        static int once = 0;
+        int error;
+
+        if(!once) {
+                once = 1;
+                error = sparc_floppy_request_irq(FLOPPY_IRQ,
+                                                 IRQF_DISABLED,
+                                                 floppy_interrupt);
+                return ((error == 0) ? 0 : -1);
+        } else return 0;
+}
+
+static struct linux_prom_registers fd_regs[2];
+
+static int sun_floppy_init(void)
+{
+        char state[128];
+        int tnode, fd_node, num_regs;
+        struct resource r;
+
+        use_virtual_dma = 1;
+
+        FLOPPY_IRQ = 11;
+        /* Forget it if we aren't on a machine that could possibly
+         * ever have a floppy drive.
+         */
+        if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
+           ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
+            (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
+                /* We certainly don't have a floppy controller. */
+                goto no_sun_fdc;
+        }
+        /* Well, try to find one. */
+        tnode = prom_getchild(prom_root_node);
+        fd_node = prom_searchsiblings(tnode, "obio");
+        if(fd_node != 0) {
+                tnode = prom_getchild(fd_node);
+                fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
+        } else {
+                fd_node = prom_searchsiblings(tnode, "fd");
+        }
+        if(fd_node == 0) {
+                goto no_sun_fdc;
+        }
+
+        /* The sun4m lets us know if the controller is actually usable. */
+        if(sparc_cpu_model == sun4m &&
+           prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
+                if(!strcmp(state, "disabled")) {
+                        goto no_sun_fdc;
+                }
+        }
+        num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
+        num_regs = (num_regs / sizeof(fd_regs[0]));
+        prom_apply_obio_ranges(fd_regs, num_regs);
+        memset(&r, 0, sizeof(r));
+        r.flags = fd_regs[0].which_io;
+        r.start = fd_regs[0].phys_addr;
+        sun_fdc = (struct sun_flpy_controller *)
+            sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
+
+        /* Last minute sanity check... */
+        if(sun_fdc->status_82072 == 0xff) {
+                sun_fdc = NULL;
+                goto no_sun_fdc;
+        }
+
+        sun_fdops.fd_inb = sun_82077_fd_inb;
+        sun_fdops.fd_outb = sun_82077_fd_outb;
+        fdc_status = &sun_fdc->status_82077;
+
+        if (sun_fdc->dor_82077 == 0x80) {
+                sun_fdc->dor_82077 = 0x02;
+                if (sun_fdc->dor_82077 == 0x80) {
+                        sun_fdops.fd_inb = sun_82072_fd_inb;
+                        sun_fdops.fd_outb = sun_82072_fd_outb;
+                        fdc_status = &sun_fdc->status_82072;
+                }
+        }
+
+        /* Success... */
+        allowed_drive_mask = 0x01;
+        return (int) sun_fdc;
+
+no_sun_fdc:
+        return -1;
+}
+
+static int sparc_eject(void)
+{
+        set_dor(0x00, 0xff, 0x90);
+        udelay(500);
+        set_dor(0x00, 0x6f, 0x00);
+        udelay(500);
+        return 0;
+}
+
+#define fd_eject(drive) sparc_eject()
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
new file mode 100644
index 000000000000..c39db1060bc7
--- /dev/null
+++ b/arch/sparc/include/asm/floppy_64.h
@@ -0,0 +1,782 @@
+/* floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ *
+ * Ultra/PCI support added: Sep 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef __ASM_SPARC64_FLOPPY_H
+#define __ASM_SPARC64_FLOPPY_H
+
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/sbus.h>
+#include <asm/irq.h>
+
+
+/*
+ * Define this to enable exchanging drive 0 and 1 if only drive 1 is
+ * probed on PCI machines.
+ */
+#undef PCI_FDC_SWAP_DRIVES
+
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+        volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */
+        volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */
+        volatile unsigned char dor_82077;     /* Digital Output reg. */
+        volatile unsigned char tapectl_82077; /* Tape Control reg */
+        volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+        volatile unsigned char data_82077;    /* Data fifo. */
+        volatile unsigned char ___unused;
+        volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on an Ultra anyways. */
+static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
+unsigned long fdc_status;
+static struct sbus_dev *floppy_sdev = NULL;
+
+struct sun_floppy_ops {
+        unsigned char   (*fd_inb) (unsigned long port);
+        void            (*fd_outb) (unsigned char value, unsigned long port);
+        void            (*fd_enable_dma) (void);
+        void            (*fd_disable_dma) (void);
+        void            (*fd_set_dma_mode) (int);
+        void            (*fd_set_dma_addr) (char *);
+        void            (*fd_set_dma_count) (int);
+        unsigned int    (*get_dma_residue) (void);
+        int             (*fd_request_irq) (void);
+        void            (*fd_free_irq) (void);
+        int             (*fd_eject) (int);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fdops.fd_enable_dma()
+#define fd_disable_dma()          sun_fdops.fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fdops.fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fdops.fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fdops.fd_set_dma_count(count)
+#define get_dma_residue(x)        sun_fdops.get_dma_residue()
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fdops.fd_request_irq()
+#define fd_free_irq()             sun_fdops.fd_free_irq()
+#define fd_eject(drive)           sun_fdops.fd_eject(drive)
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+static int sun_floppy_types[2] = { 0, 0 };
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FLOPPY0_TYPE            sun_floppy_init()
+#define FLOPPY1_TYPE            sun_floppy_types[1]
+
+#define FDC1                    ((unsigned long)sun_fdc)
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+static unsigned char sun_82077_fd_inb(unsigned long port)
+{
+        udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to read unknown port %lx\n", port);
+                panic("floppy: Port bolixed.");
+        case 4: /* FD_STATUS */
+                return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA;
+        case 5: /* FD_DATA */
+                return sbus_readb(&sun_fdc->data_82077);
+        case 7: /* FD_DIR */
+                /* XXX: Is DCL on 0x80 in sun4m? */
+                return sbus_readb(&sun_fdc->dir_82077);
+        };
+        panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, unsigned long port)
+{
+        udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to write to unknown port %lx\n", port);
+                panic("floppy: Port bolixed.");
+        case 2: /* FD_DOR */
+                /* Happily, the 82077 has a real DOR register. */
+                sbus_writeb(value, &sun_fdc->dor_82077);
+                break;
+        case 5: /* FD_DATA */
+                sbus_writeb(value, &sun_fdc->data_82077);
+                break;
+        case 7: /* FD_DCR */
+                sbus_writeb(value, &sun_fdc->dcr_82077);
+                break;
+        case 4: /* FD_STATUS */
+                sbus_writeb(value, &sun_fdc->status_82077);
+                break;
+        };
+        return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+unsigned char *pdma_vaddr;
+unsigned long pdma_size;
+volatile int doing_pdma = 0;
+
+/* This is software state */
+char *pdma_base = NULL;
+unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static void sun_fd_disable_dma(void)
+{
+        doing_pdma = 0;
+        if (pdma_base) {
+                mmu_unlockarea(pdma_base, pdma_areasize);
+                pdma_base = NULL;
+        }
+}
+
+static void sun_fd_set_dma_mode(int mode)
+{
+        switch(mode) {
+        case DMA_MODE_READ:
+                doing_pdma = 1;
+                break;
+        case DMA_MODE_WRITE:
+                doing_pdma = 2;
+                break;
+        default:
+                printk("Unknown dma mode %d\n", mode);
+                panic("floppy: Giving up...");
+        }
+}
+
+static void sun_fd_set_dma_addr(char *buffer)
+{
+        pdma_vaddr = buffer;
+}
+
+static void sun_fd_set_dma_count(int length)
+{
+        pdma_size = length;
+}
+
+static void sun_fd_enable_dma(void)
+{
+        pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+        pdma_base = pdma_vaddr;
+        pdma_areasize = pdma_size;
+}
+
+irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie)
+{
+        if (likely(doing_pdma)) {
+                void __iomem *stat = (void __iomem *) fdc_status;
+                unsigned char *vaddr = pdma_vaddr;
+                unsigned long size = pdma_size;
+                u8 val;
+
+                while (size) {
+                        val = readb(stat);
+                        if (unlikely(!(val & 0x80))) {
+                                pdma_vaddr = vaddr;
+                                pdma_size = size;
+                                return IRQ_HANDLED;
+                        }
+                        if (unlikely(!(val & 0x20))) {
+                                pdma_vaddr = vaddr;
+                                pdma_size = size;
+                                doing_pdma = 0;
+                                goto main_interrupt;
+                        }
+                        if (val & 0x40) {
+                                /* read */
+                                *vaddr++ = readb(stat + 1);
+                        } else {
+                                unsigned char data = *vaddr++;
+
+                                /* write */
+                                writeb(data, stat + 1);
+                        }
+                        size--;
+                }
+
+                pdma_vaddr = vaddr;
+                pdma_size = size;
+
+                /* Send Terminal Count pulse to floppy controller. */
+                val = readb(auxio_register);
+                val |= AUXIO_AUX1_FTCNT;
+                writeb(val, auxio_register);
+                val &= ~AUXIO_AUX1_FTCNT;
+                writeb(val, auxio_register);
+
+                doing_pdma = 0;
+        }
+
+main_interrupt:
+        return floppy_interrupt(irq, dev_cookie);
+}
+
+static int sun_fd_request_irq(void)
+{
+        static int once = 0;
+        int error;
+
+        if(!once) {
+                once = 1;
+
+                error = request_irq(FLOPPY_IRQ, sparc_floppy_irq,
+                                    IRQF_DISABLED, "floppy", NULL);
+
+                return ((error == 0) ? 0 : -1);
+        }
+        return 0;
+}
+
+static void sun_fd_free_irq(void)
+{
+}
+
+static unsigned int sun_get_dma_residue(void)
+{
+        /* XXX This isn't really correct. XXX */
+        return 0;
+}
+
+static int sun_fd_eject(int drive)
+{
+        set_dor(0x00, 0xff, 0x90);
+        udelay(500);
+        set_dor(0x00, 0x6f, 0x00);
+        udelay(500);
+        return 0;
+}
+
+#ifdef CONFIG_PCI
+#include <asm/ebus.h>
+#include <asm/ns87303.h>
+
+static struct ebus_dma_info sun_pci_fd_ebus_dma;
+static struct pci_dev *sun_pci_ebus_dev;
+static int sun_pci_broken_drive = -1;
+
+struct sun_pci_dma_op {
+        unsigned int    addr;
+        int             len;
+        int             direction;
+        char            *buf;
+};
+static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL};
+static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL};
+
+extern irqreturn_t floppy_interrupt(int irq, void *dev_id);
+
+static unsigned char sun_pci_fd_inb(unsigned long port)
+{
+        udelay(5);
+        return inb(port);
+}
+
+static void sun_pci_fd_outb(unsigned char val, unsigned long port)
+{
+        udelay(5);
+        outb(val, port);
+}
+
+static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port)
+{
+        udelay(5);
+        /*
+         * XXX: Due to SUN's broken floppy connector on AX and AXi
+         *      we need to turn on MOTOR_0 also, if the floppy is
+         *      jumpered to DS1 (like most PC floppies are). I hope
+         *      this does not hurt correct hardware like the AXmp.
+         *      (Eddie, Sep 12 1998).
+         */
+        if (port == ((unsigned long)sun_fdc) + 2) {
+                if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) {
+                        val |= 0x10;
+                }
+        }
+        outb(val, port);
+}
+
+#ifdef PCI_FDC_SWAP_DRIVES
+static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port)
+{
+        udelay(5);
+        /*
+         * XXX: Due to SUN's broken floppy connector on AX and AXi
+         *      we need to turn on MOTOR_0 also, if the floppy is
+         *      jumpered to DS1 (like most PC floppies are). I hope
+         *      this does not hurt correct hardware like the AXmp.
+         *      (Eddie, Sep 12 1998).
+         */
+        if (port == ((unsigned long)sun_fdc) + 2) {
+                if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) {
+                        val &= ~(0x03);
+                        val |= 0x21;
+                }
+        }
+        outb(val, port);
+}
+#endif /* PCI_FDC_SWAP_DRIVES */
+
+static void sun_pci_fd_enable_dma(void)
+{
+        BUG_ON((NULL == sun_pci_dma_pending.buf)        ||
+            (0    == sun_pci_dma_pending.len)   ||
+            (0    == sun_pci_dma_pending.direction));
+
+        sun_pci_dma_current.buf = sun_pci_dma_pending.buf;
+        sun_pci_dma_current.len = sun_pci_dma_pending.len;
+        sun_pci_dma_current.direction = sun_pci_dma_pending.direction;
+
+        sun_pci_dma_pending.buf  = NULL;
+        sun_pci_dma_pending.len  = 0;
+        sun_pci_dma_pending.direction = 0;
+        sun_pci_dma_pending.addr = -1U;
+
+        sun_pci_dma_current.addr =
+                pci_map_single(sun_pci_ebus_dev,
+                               sun_pci_dma_current.buf,
+                               sun_pci_dma_current.len,
+                               sun_pci_dma_current.direction);
+
+        ebus_dma_enable(&sun_pci_fd_ebus_dma, 1);
+
+        if (ebus_dma_request(&sun_pci_fd_ebus_dma,
+                             sun_pci_dma_current.addr,
+                             sun_pci_dma_current.len))
+                BUG();
+}
+
+static void sun_pci_fd_disable_dma(void)
+{
+        ebus_dma_enable(&sun_pci_fd_ebus_dma, 0);
+        if (sun_pci_dma_current.addr != -1U)
+                pci_unmap_single(sun_pci_ebus_dev,
+                                 sun_pci_dma_current.addr,
+                                 sun_pci_dma_current.len,
+                                 sun_pci_dma_current.direction);
+        sun_pci_dma_current.addr = -1U;
+}
+
+static void sun_pci_fd_set_dma_mode(int mode)
+{
+        if (mode == DMA_MODE_WRITE)
+                sun_pci_dma_pending.direction = PCI_DMA_TODEVICE;
+        else
+                sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE;
+
+        ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE);
+}
+
+static void sun_pci_fd_set_dma_count(int length)
+{
+        sun_pci_dma_pending.len = length;
+}
+
+static void sun_pci_fd_set_dma_addr(char *buffer)
+{
+        sun_pci_dma_pending.buf = buffer;
+}
+
+static unsigned int sun_pci_get_dma_residue(void)
+{
+        return ebus_dma_residue(&sun_pci_fd_ebus_dma);
+}
+
+static int sun_pci_fd_request_irq(void)
+{
+        return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1);
+}
+
+static void sun_pci_fd_free_irq(void)
+{
+        ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0);
+}
+
+static int sun_pci_fd_eject(int drive)
+{
+        return -EINVAL;
+}
+
+void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie)
+{
+        floppy_interrupt(0, NULL);
+}
+
+/*
+ * Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI,
+ * even if this is configured using DS1, thus looks like /dev/fd1 with
+ * the cabling used in Ultras.
+ */
+#define DOR     (port + 2)
+#define MSR     (port + 4)
+#define FIFO    (port + 5)
+
+static void sun_pci_fd_out_byte(unsigned long port, unsigned char val,
+                                unsigned long reg)
+{
+        unsigned char status;
+        int timeout = 1000;
+
+        while (!((status = inb(MSR)) & 0x80) && --timeout)
+                udelay(100);
+        outb(val, reg);
+}
+
+static unsigned char sun_pci_fd_sensei(unsigned long port)
+{
+        unsigned char result[2] = { 0x70, 0x00 };
+        unsigned char status;
+        int i = 0;
+
+        sun_pci_fd_out_byte(port, 0x08, FIFO);
+        do {
+                int timeout = 1000;
+
+                while (!((status = inb(MSR)) & 0x80) && --timeout)
+                        udelay(100);
+
+                if (!timeout)
+                        break;
+
+                if ((status & 0xf0) == 0xd0)
+                        result[i++] = inb(FIFO);
+                else
+                        break;
+        } while (i < 2);
+
+        return result[0];
+}
+
+static void sun_pci_fd_reset(unsigned long port)
+{
+        unsigned char mask = 0x00;
+        unsigned char status;
+        int timeout = 10000;
+
+        outb(0x80, MSR);
+        do {
+                status = sun_pci_fd_sensei(port);
+                if ((status & 0xc0) == 0xc0)
+                        mask |= 1 << (status & 0x03);
+                else
+                        udelay(100);
+        } while ((mask != 0x0f) && --timeout);
+}
+
+static int sun_pci_fd_test_drive(unsigned long port, int drive)
+{
+        unsigned char status, data;
+        int timeout = 1000;
+        int ready;
+
+        sun_pci_fd_reset(port);
+
+        data = (0x10 << drive) | 0x0c | drive;
+        sun_pci_fd_out_byte(port, data, DOR);
+
+        sun_pci_fd_out_byte(port, 0x07, FIFO);
+        sun_pci_fd_out_byte(port, drive & 0x03, FIFO);
+
+        do {
+                udelay(100);
+                status = sun_pci_fd_sensei(port);
+        } while (((status & 0xc0) == 0x80) && --timeout);
+
+        if (!timeout)
+                ready = 0;
+        else
+                ready = (status & 0x10) ? 0 : 1;
+
+        sun_pci_fd_reset(port);
+        return ready;
+}
+#undef FIFO
+#undef MSR
+#undef DOR
+
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_PCI
+static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
+{
+        if (!strcmp(edev->prom_node->name, "fdthree"))
+                return 1;
+        if (!strcmp(edev->prom_node->name, "floppy")) {
+                const char *compat;
+
+                compat = of_get_property(edev->prom_node,
+                                         "compatible", NULL);
+                if (compat && !strcmp(compat, "fdthree"))
+                        return 1;
+        }
+        return 0;
+}
+#endif
+
+static unsigned long __init sun_floppy_init(void)
+{
+        char state[128];
+        struct sbus_bus *bus;
+        struct sbus_dev *sdev = NULL;
+        static int initialized = 0;
+
+        if (initialized)
+                return sun_floppy_types[0];
+        initialized = 1;
+
+        for_all_sbusdev (sdev, bus) {
+                if (!strcmp(sdev->prom_name, "SUNW,fdtwo"))
+                        break;
+        }
+        if(sdev) {
+                floppy_sdev = sdev;
+                FLOPPY_IRQ = sdev->irqs[0];
+        } else {
+#ifdef CONFIG_PCI
+                struct linux_ebus *ebus;
+                struct linux_ebus_device *edev = NULL;
+                unsigned long config = 0;
+                void __iomem *auxio_reg;
+                const char *state_prop;
+
+                for_each_ebus(ebus) {
+                        for_each_ebusdev(edev, ebus) {
+                                if (ebus_fdthree_p(edev))
+                                        goto ebus_done;
+                        }
+                }
+        ebus_done:
+                if (!edev)
+                        return 0;
+
+                state_prop = of_get_property(edev->prom_node, "status", NULL);
+                if (state_prop && !strncmp(state_prop, "disabled", 8))
+                        return 0;
+
+                FLOPPY_IRQ = edev->irqs[0];
+
+                /* Make sure the high density bit is set, some systems
+                 * (most notably Ultra5/Ultra10) come up with it clear.
+                 */
+                auxio_reg = (void __iomem *) edev->resource[2].start;
+                writel(readl(auxio_reg)|0x2, auxio_reg);
+
+                sun_pci_ebus_dev = ebus->self;
+
+                spin_lock_init(&sun_pci_fd_ebus_dma.lock);
+
+                /* XXX ioremap */
+                sun_pci_fd_ebus_dma.regs = (void __iomem *)
+                        edev->resource[1].start;
+                if (!sun_pci_fd_ebus_dma.regs)
+                        return 0;
+
+                sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER |
+                                             EBUS_DMA_FLAG_TCI_DISABLE);
+                sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback;
+                sun_pci_fd_ebus_dma.client_cookie = NULL;
+                sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ;
+                strcpy(sun_pci_fd_ebus_dma.name, "floppy");
+                if (ebus_dma_register(&sun_pci_fd_ebus_dma))
+                        return 0;
+
+                /* XXX ioremap */
+                sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start;
+
+                sun_fdops.fd_inb = sun_pci_fd_inb;
+                sun_fdops.fd_outb = sun_pci_fd_outb;
+
+                can_use_virtual_dma = use_virtual_dma = 0;
+                sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma;
+                sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma;
+                sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode;
+                sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr;
+                sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count;
+                sun_fdops.get_dma_residue = sun_pci_get_dma_residue;
+
+                sun_fdops.fd_request_irq = sun_pci_fd_request_irq;
+                sun_fdops.fd_free_irq = sun_pci_fd_free_irq;
+
+                sun_fdops.fd_eject = sun_pci_fd_eject;
+
+                fdc_status = (unsigned long) &sun_fdc->status_82077;
+
+                /*
+                 * XXX: Find out on which machines this is really needed.
+                 */
+                if (1) {
+                        sun_pci_broken_drive = 1;
+                        sun_fdops.fd_outb = sun_pci_fd_broken_outb;
+                }
+
+                allowed_drive_mask = 0;
+                if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0))
+                        sun_floppy_types[0] = 4;
+                if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1))
+                        sun_floppy_types[1] = 4;
+
+                /*
+                 * Find NS87303 SuperIO config registers (through ecpp).
+                 */
+                for_each_ebus(ebus) {
+                        for_each_ebusdev(edev, ebus) {
+                                if (!strcmp(edev->prom_node->name, "ecpp")) {
+                                        config = edev->resource[1].start;
+                                        goto config_done;
+                                }
+                        }
+                }
+        config_done:
+
+                /*
+                 * Sanity check, is this really the NS87303?
+                 */
+                switch (config & 0x3ff) {
+                case 0x02e:
+                case 0x15c:
+                case 0x26e:
+                case 0x398:
+                        break;
+                default:
+                        config = 0;
+                }
+
+                if (!config)
+                        return sun_floppy_types[0];
+
+                /* Enable PC-AT mode. */
+                ns87303_modify(config, ASC, 0, 0xc0);
+
+#ifdef PCI_FDC_SWAP_DRIVES
+                /*
+                 * If only Floppy 1 is present, swap drives.
+                 */
+                if (!sun_floppy_types[0] && sun_floppy_types[1]) {
+                        /*
+                         * Set the drive exchange bit in FCR on NS87303,
+                         * make sure other bits are sane before doing so.
+                         */
+                        ns87303_modify(config, FER, FER_EDM, 0);
+                        ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);
+                        ns87303_modify(config, FCR, 0, FCR_LDE);
+
+                        config = sun_floppy_types[0];
+                        sun_floppy_types[0] = sun_floppy_types[1];
+                        sun_floppy_types[1] = config;
+
+                        if (sun_pci_broken_drive != -1) {
+                                sun_pci_broken_drive = 1 - sun_pci_broken_drive;
+                                sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb;
+                        }
+                }
+#endif /* PCI_FDC_SWAP_DRIVES */
+
+                return sun_floppy_types[0];
+#else
+                return 0;
+#endif
+        }
+        prom_getproperty(sdev->prom_node, "status", state, sizeof(state));
+        if(!strncmp(state, "disabled", 8))
+                return 0;
+
+        /*
+         * We cannot do sbus_ioremap here: it does request_region,
+         * which the generic floppy driver tries to do once again.
+         * But we must use the sdev resource values as they have
+         * had parent ranges applied.
+         */
+        sun_fdc = (struct sun_flpy_controller *)
+                (sdev->resource[0].start +
+                 ((sdev->resource[0].flags & 0x1ffUL) << 32UL));
+
+        /* Last minute sanity check... */
+        if(sbus_readb(&sun_fdc->status1_82077) == 0xff) {
+                sun_fdc = (struct sun_flpy_controller *)-1;
+                return 0;
+        }
+
+        sun_fdops.fd_inb = sun_82077_fd_inb;
+        sun_fdops.fd_outb = sun_82077_fd_outb;
+
+        can_use_virtual_dma = use_virtual_dma = 1;
+        sun_fdops.fd_enable_dma = sun_fd_enable_dma;
+        sun_fdops.fd_disable_dma = sun_fd_disable_dma;
+        sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
+        sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
+        sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
+        sun_fdops.get_dma_residue = sun_get_dma_residue;
+
+        sun_fdops.fd_request_irq = sun_fd_request_irq;
+        sun_fdops.fd_free_irq = sun_fd_free_irq;
+
+        sun_fdops.fd_eject = sun_fd_eject;
+
+        fdc_status = (unsigned long) &sun_fdc->status_82077;
+
+        /* Success... */
+        allowed_drive_mask = 0x01;
+        sun_floppy_types[0] = 4;
+        sun_floppy_types[1] = 0;
+
+        return sun_floppy_types[0];
+}
+
+#define EXTRA_FLOPPY_PARAMS
+
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({      unsigned long flags; \
+        spin_lock_irqsave(&dma_spin_lock, flags); \
+        flags; \
+})
+
+#define release_dma_lock(__flags) \
+        spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+#endif /* !(__ASM_SPARC64_FLOPPY_H) */
diff --git a/arch/sparc/include/asm/fpumacro.h b/arch/sparc/include/asm/fpumacro.h
new file mode 100644
index 000000000000..cc463fec806f
--- /dev/null
+++ b/arch/sparc/include/asm/fpumacro.h
@@ -0,0 +1,33 @@
+/* fpumacro.h: FPU related macros.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_FPUMACRO_H
+#define _SPARC64_FPUMACRO_H
+
+#include <asm/asi.h>
+#include <asm/visasm.h>
+
+struct fpustate {
+        u32     regs[64];
+};
+
+#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs)
+
+static inline unsigned long fprs_read(void)
+{
+        unsigned long retval;
+
+        __asm__ __volatile__("rd %%fprs, %0" : "=r" (retval));
+
+        return retval;
+}
+
+static inline void fprs_write(unsigned long val)
+{
+        __asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val));
+}
+
+#endif /* !(_SPARC64_FPUMACRO_H) */
diff --git a/arch/sparc/include/asm/ftrace.h b/arch/sparc/include/asm/ftrace.h
new file mode 100644
index 000000000000..d27716cd38c1
--- /dev/null
+++ b/arch/sparc/include/asm/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SPARC64_FTRACE
+#define _ASM_SPARC64_FTRACE
+
+#ifdef CONFIG_MCOUNT
+#define MCOUNT_ADDR             ((long)(_mcount))
+#define MCOUNT_INSN_SIZE        4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_SPARC64_FTRACE */
diff --git a/arch/sparc/include/asm/futex.h b/arch/sparc/include/asm/futex.h
new file mode 100644
index 000000000000..736335f36713
--- /dev/null
+++ b/arch/sparc/include/asm/futex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FUTEX_H
+#define ___ASM_SPARC_FUTEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/futex_64.h>
+#else
+#include <asm/futex_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/futex_32.h b/arch/sparc/include/asm/futex_32.h
new file mode 100644
index 000000000000..6a332a9f099c
--- /dev/null
+++ b/arch/sparc/include/asm/futex_32.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/sparc/include/asm/futex_64.h b/arch/sparc/include/asm/futex_64.h
new file mode 100644
index 000000000000..d8378935ae90
--- /dev/null
+++ b/arch/sparc/include/asm/futex_64.h
@@ -0,0 +1,110 @@
+#ifndef _SPARC64_FUTEX_H
+#define _SPARC64_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+
+#define __futex_cas_op(insn, ret, oldval, uaddr, oparg) \
+        __asm__ __volatile__(                           \
+        "\n1:   lduwa   [%3] %%asi, %2\n"               \
+        "       " insn "\n"                             \
+        "2:     casa    [%3] %%asi, %2, %1\n"           \
+        "       cmp     %2, %1\n"                       \
+        "       bne,pn  %%icc, 1b\n"                    \
+        "        mov    0, %0\n"                        \
+        "3:\n"                                          \
+        "       .section .fixup,#alloc,#execinstr\n"    \
+        "       .align  4\n"                            \
+        "4:     sethi   %%hi(3b), %0\n"                 \
+        "       jmpl    %0 + %%lo(3b), %%g0\n"          \
+        "        mov    %5, %0\n"                       \
+        "       .previous\n"                            \
+        "       .section __ex_table,\"a\"\n"            \
+        "       .align  4\n"                            \
+        "       .word   1b, 4b\n"                       \
+        "       .word   2b, 4b\n"                       \
+        "       .previous\n"                            \
+        : "=&r" (ret), "=&r" (oldval), "=&r" (tem)      \
+        : "r" (uaddr), "r" (oparg), "i" (-EFAULT)       \
+        : "memory")
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+        int op = (encoded_op >> 28) & 7;
+        int cmp = (encoded_op >> 24) & 15;
+        int oparg = (encoded_op << 8) >> 20;
+        int cmparg = (encoded_op << 20) >> 20;
+        int oldval = 0, ret, tem;
+
+        if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int))))
+                return -EFAULT;
+        if (unlikely((((unsigned long) uaddr) & 0x3UL)))
+                return -EINVAL;
+
+        if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+                oparg = 1 << oparg;
+
+        pagefault_disable();
+
+        switch (op) {
+        case FUTEX_OP_SET:
+                __futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg);
+                break;
+        case FUTEX_OP_ADD:
+                __futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg);
+                break;
+        case FUTEX_OP_OR:
+                __futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
+                break;
+        case FUTEX_OP_ANDN:
+                __futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg);
+                break;
+        case FUTEX_OP_XOR:
+                __futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
+                break;
+        default:
+                ret = -ENOSYS;
+        }
+
+        pagefault_enable();
+
+        if (!ret) {
+                switch (cmp) {
+                case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+                case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+                case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+                case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+                case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+                case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+                default: ret = -ENOSYS;
+                }
+        }
+        return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+        __asm__ __volatile__(
+        "\n1:   casa    [%3] %%asi, %2, %0\n"
+        "2:\n"
+        "       .section .fixup,#alloc,#execinstr\n"
+        "       .align  4\n"
+        "3:     sethi   %%hi(2b), %0\n"
+        "       jmpl    %0 + %%lo(2b), %%g0\n"
+        "        mov    %4, %0\n"
+        "       .previous\n"
+        "       .section __ex_table,\"a\"\n"
+        "       .align  4\n"
+        "       .word   1b, 3b\n"
+        "       .previous\n"
+        : "=r" (newval)
+        : "0" (newval), "r" (oldval), "r" (uaddr), "i" (-EFAULT)
+        : "memory");
+
+        return newval;
+}
+
+#endif /* !(_SPARC64_FUTEX_H) */
diff --git a/arch/sparc/include/asm/hardirq.h b/arch/sparc/include/asm/hardirq.h
new file mode 100644
index 000000000000..44d4e2345148
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HARDIRQ_H
+#define ___ASM_SPARC_HARDIRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/hardirq_64.h>
+#else
+#include <asm/hardirq_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/hardirq_32.h b/arch/sparc/include/asm/hardirq_32.h
new file mode 100644
index 000000000000..4f63ed8df551
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq_32.h
@@ -0,0 +1,23 @@
+/* hardirq.h: 32-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef __SPARC_HARDIRQ_H
+#define __SPARC_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
+typedef struct {
+        unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS    8
+
+#endif /* __SPARC_HARDIRQ_H */
diff --git a/arch/sparc/include/asm/hardirq_64.h b/arch/sparc/include/asm/hardirq_64.h
new file mode 100644
index 000000000000..7c29fd1a87aa
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq_64.h
@@ -0,0 +1,19 @@
+/* hardirq.h: 64-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997, 1998, 2005 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef __SPARC64_HARDIRQ_H
+#define __SPARC64_HARDIRQ_H
+
+#include <asm/cpudata.h>
+
+#define __ARCH_IRQ_STAT
+#define local_softirq_pending() \
+        (local_cpu_data().__softirq_pending)
+
+void ack_bad_irq(unsigned int irq);
+
+#define HARDIRQ_BITS    8
+
+#endif /* !(__SPARC64_HARDIRQ_H) */
diff --git a/arch/sparc/include/asm/head.h b/arch/sparc/include/asm/head.h
new file mode 100644
index 000000000000..be8f03f3e731
--- /dev/null
+++ b/arch/sparc/include/asm/head.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HEAD_H
+#define ___ASM_SPARC_HEAD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/head_64.h>
+#else
+#include <asm/head_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/head_32.h b/arch/sparc/include/asm/head_32.h
new file mode 100644
index 000000000000..7c35491a8b53
--- /dev/null
+++ b/arch/sparc/include/asm/head_32.h
@@ -0,0 +1,102 @@
+#ifndef __SPARC_HEAD_H
+#define __SPARC_HEAD_H
+
+#define KERNBASE        0xf0000000  /* First address the kernel will eventually be */
+#define LOAD_ADDR       0x4000      /* prom jumps to us here unless this is elf /boot */
+#define SUN4C_SEGSZ     (1 << 18)
+#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2)  /* Used in boot remapping. */
+#define INTS_ENAB        0x01           /* entry.S uses this. */
+
+#define SUN4_PROM_VECTOR 0xFFE81000     /* SUN4 PROM needs to be hardwired */
+
+#define WRITE_PAUSE      nop; nop; nop; /* Have to do this after %wim/%psr chg */
+#define NOP_INSN         0x01000000     /* Used to patch sparc_save_state */
+
+/* Here are some trap goodies */
+
+/* Generic trap entry. */
+#define TRAP_ENTRY(type, label) \
+        rd %psr, %l0; b label; rd %wim, %l3; nop;
+
+/* Data/text faults. Defaults to sun4c version at boot time. */
+#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7;
+#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7;
+#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7;
+#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7;
+
+/* This is for traps we should NEVER get. */
+#define BAD_TRAP(num) \
+        rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3;
+
+/* This is for traps when we want just skip the instruction which caused it */
+#define SKIP_TRAP(type, name) \
+        jmpl %l2, %g0; rett %l2 + 4; nop; nop;
+
+/* Notice that for the system calls we pull a trick.  We load up a
+ * different pointer to the system call vector table in %l7, but call
+ * the same generic system call low-level entry point.  The trap table
+ * entry sequences are also HyperSparc pipeline friendly ;-)
+ */
+
+/* Software trap for Linux system calls. */
+#define LINUX_SYSCALL_TRAP \
+        sethi %hi(sys_call_table), %l7; \
+        or %l7, %lo(sys_call_table), %l7; \
+        b linux_sparc_syscall; \
+        rd %psr, %l0;
+
+#define BREAKPOINT_TRAP \
+        b breakpoint_trap; \
+        rd %psr,%l0; \
+        nop; \
+        nop;
+
+#ifdef CONFIG_KGDB
+#define KGDB_TRAP(num) \
+        b kgdb_trap_low; \
+        rd %psr,%l0; \
+        nop; \
+        nop;
+#else
+#define KGDB_TRAP(num) \
+        BAD_TRAP(num)
+#endif
+
+/* The Get Condition Codes software trap for userland. */
+#define GETCC_TRAP \
+        b getcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Set Condition Codes software trap for userland. */
+#define SETCC_TRAP \
+        b setcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Get PSR software trap for userland. */
+#define GETPSR_TRAP \
+        mov %psr, %i0; jmp %l2; rett %l2 + 4; nop;
+
+/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and
+ * gets handled with another macro.
+ */
+#define TRAP_ENTRY_INTERRUPT(int_level) \
+        mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3;
+
+/* NMI's (Non Maskable Interrupts) are special, you can't keep them
+ * from coming in, and basically if you get one, the shows over. ;(
+ * On the sun4c they are usually asynchronous memory errors, on the
+ * the sun4m they could be either due to mem errors or a software
+ * initiated interrupt from the prom/kern on an SMP box saying "I
+ * command you to do CPU tricks, read your mailbox for more info."
+ */
+#define NMI_TRAP \
+        rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop;
+
+/* Window overflows/underflows are special and we need to try to be as
+ * efficient as possible here....
+ */
+#define WINDOW_SPILL \
+        rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#define WINDOW_FILL \
+        rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#endif /* __SPARC_HEAD_H */
diff --git a/arch/sparc/include/asm/head_64.h b/arch/sparc/include/asm/head_64.h
new file mode 100644
index 000000000000..10e9dabc4c41
--- /dev/null
+++ b/arch/sparc/include/asm/head_64.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC64_HEAD_H
+#define _SPARC64_HEAD_H
+
+#include <asm/pstate.h>
+
+        /* wrpr %g0, val, %gl */
+#define SET_GL(val)     \
+        .word   0xa1902000 | val
+
+        /* rdpr %gl, %gN */
+#define GET_GL_GLOBAL(N)        \
+        .word   0x81540000 | (N << 25)
+
+#define KERNBASE        0x400000
+
+#define PTREGS_OFF      (STACK_BIAS + STACKFRAME_SZ)
+
+#define __CHEETAH_ID    0x003e0014
+#define __JALAPENO_ID   0x003e0016
+#define __SERRANO_ID    0x003e0022
+
+#define CHEETAH_MANUF           0x003e
+#define CHEETAH_IMPL            0x0014 /* Ultra-III   */
+#define CHEETAH_PLUS_IMPL       0x0015 /* Ultra-III+  */
+#define JALAPENO_IMPL           0x0016 /* Ultra-IIIi  */
+#define JAGUAR_IMPL             0x0018 /* Ultra-IV    */
+#define PANTHER_IMPL            0x0019 /* Ultra-IV+   */
+#define SERRANO_IMPL            0x0022 /* Ultra-IIIi+ */
+
+#define BRANCH_IF_SUN4V(tmp1,label)             \
+        sethi   %hi(is_sun4v), %tmp1;           \
+        lduw    [%tmp1 + %lo(is_sun4v)], %tmp1; \
+        brnz,pn %tmp1, label;                   \
+         nop
+
+#define BRANCH_IF_CHEETAH_BASE(tmp1,tmp2,label) \
+        rdpr    %ver, %tmp1;                    \
+        sethi   %hi(__CHEETAH_ID), %tmp2;       \
+        srlx    %tmp1, 32, %tmp1;               \
+        or      %tmp2, %lo(__CHEETAH_ID), %tmp2;\
+        cmp     %tmp1, %tmp2;                   \
+        be,pn   %icc, label;                    \
+         nop;
+
+#define BRANCH_IF_JALAPENO(tmp1,tmp2,label)     \
+        rdpr    %ver, %tmp1;                    \
+        sethi   %hi(__JALAPENO_ID), %tmp2;      \
+        srlx    %tmp1, 32, %tmp1;               \
+        or      %tmp2, %lo(__JALAPENO_ID), %tmp2;\
+        cmp     %tmp1, %tmp2;                   \
+        be,pn   %icc, label;                    \
+         nop;
+
+#define BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(tmp1,tmp2,label)     \
+        rdpr    %ver, %tmp1;                    \
+        srlx    %tmp1, (32 + 16), %tmp2;        \
+        cmp     %tmp2, CHEETAH_MANUF;           \
+        bne,pt  %xcc, 99f;                      \
+         sllx   %tmp1, 16, %tmp1;               \
+        srlx    %tmp1, (32 + 16), %tmp2;        \
+        cmp     %tmp2, CHEETAH_PLUS_IMPL;       \
+        bgeu,pt %xcc, label;                    \
+99:      nop;
+
+#define BRANCH_IF_ANY_CHEETAH(tmp1,tmp2,label)  \
+        rdpr    %ver, %tmp1;                    \
+        srlx    %tmp1, (32 + 16), %tmp2;        \
+        cmp     %tmp2, CHEETAH_MANUF;           \
+        bne,pt  %xcc, 99f;                      \
+         sllx   %tmp1, 16, %tmp1;               \
+        srlx    %tmp1, (32 + 16), %tmp2;        \
+        cmp     %tmp2, CHEETAH_IMPL;            \
+        bgeu,pt %xcc, label;                    \
+99:      nop;
+
+#endif /* !(_SPARC64_HEAD_H) */
diff --git a/arch/sparc/include/asm/highmem.h b/arch/sparc/include/asm/highmem.h
new file mode 100644
index 000000000000..3de42e776274
--- /dev/null
+++ b/arch/sparc/include/asm/highmem.h
@@ -0,0 +1,81 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *                    Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with 
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+#include <asm/fixmap.h>
+#include <asm/vaddrs.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void kmap_init(void) __init;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.  Currently the simplest way to do this is to align the
+ * pkmap region on a pagetable boundary (4MB).
+ */
+#define LAST_PKMAP 1024
+#define PKMAP_SIZE (LAST_PKMAP << PAGE_SHIFT)
+#define PKMAP_BASE PMD_ALIGN(SRMMU_NOCACHE_VADDR + (SRMMU_MAX_NOCACHE_PAGES << PAGE_SHIFT))
+
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+        BUG_ON(in_interrupt());
+        if (!PageHighMem(page))
+                return page_address(page);
+        return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+        BUG_ON(in_interrupt());
+        if (!PageHighMem(page))
+                return;
+        kunmap_high(page);
+}
+
+extern void *kmap_atomic(struct page *page, enum km_type type);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern struct page *kmap_atomic_to_page(void *vaddr);
+
+#define flush_cache_kmaps()     flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/sparc/include/asm/hugetlb.h b/arch/sparc/include/asm/hugetlb.h
new file mode 100644
index 000000000000..177061064ee6
--- /dev/null
+++ b/arch/sparc/include/asm/hugetlb.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_SPARC64_HUGETLB_H
+#define _ASM_SPARC64_HUGETLB_H
+
+#include <asm/page.h>
+
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+                     pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+                              pte_t *ptep);
+
+void hugetlb_prefault_arch_hook(struct mm_struct *mm);
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+                                         unsigned long addr,
+                                         unsigned long len) {
+        return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+                        unsigned long addr, unsigned long len)
+{
+        if (len & ~HPAGE_MASK)
+                return -EINVAL;
+        if (addr & ~HPAGE_MASK)
+                return -EINVAL;
+        return 0;
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+                                          unsigned long addr, unsigned long end,
+                                          unsigned long floor,
+                                          unsigned long ceiling)
+{
+        free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+                                         unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+        return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+        return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+                                           unsigned long addr, pte_t *ptep)
+{
+        ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+                                             unsigned long addr, pte_t *ptep,
+                                             pte_t pte, int dirty)
+{
+        return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+        return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+        return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_SPARC64_HUGETLB_H */
diff --git a/arch/sparc/include/asm/hvtramp.h b/arch/sparc/include/asm/hvtramp.h
new file mode 100644
index 000000000000..b2b9b947b3a4
--- /dev/null
+++ b/arch/sparc/include/asm/hvtramp.h
@@ -0,0 +1,37 @@
+#ifndef _SPARC64_HVTRAP_H
+#define _SPARC64_HVTRAP_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct hvtramp_mapping {
+        __u64           vaddr;
+        __u64           tte;
+};
+
+struct hvtramp_descr {
+        __u32                   cpu;
+        __u32                   num_mappings;
+        __u64                   fault_info_va;
+        __u64                   fault_info_pa;
+        __u64                   thread_reg;
+        struct hvtramp_mapping  maps[1];
+};
+
+extern void hv_cpu_startup(unsigned long hvdescr_pa);
+
+#endif
+
+#define HVTRAMP_DESCR_CPU               0x00
+#define HVTRAMP_DESCR_NUM_MAPPINGS      0x04
+#define HVTRAMP_DESCR_FAULT_INFO_VA     0x08
+#define HVTRAMP_DESCR_FAULT_INFO_PA     0x10
+#define HVTRAMP_DESCR_THREAD_REG        0x18
+#define HVTRAMP_DESCR_MAPS              0x20
+
+#define HVTRAMP_MAPPING_VADDR           0x00
+#define HVTRAMP_MAPPING_TTE             0x08
+#define HVTRAMP_MAPPING_SIZE            0x10
+
+#endif /* _SPARC64_HVTRAP_H */
diff --git a/arch/sparc/include/asm/hw_irq.h b/arch/sparc/include/asm/hw_irq.h
new file mode 100644
index 000000000000..8d30a7694be2
--- /dev/null
+++ b/arch/sparc/include/asm/hw_irq.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SPARC_HW_IRQ_H
+#define __ASM_SPARC_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h
new file mode 100644
index 000000000000..109ae24ba242
--- /dev/null
+++ b/arch/sparc/include/asm/hypervisor.h
@@ -0,0 +1,2949 @@
+#ifndef _SPARC64_HYPERVISOR_H
+#define _SPARC64_HYPERVISOR_H
+
+/* Sun4v hypervisor interfaces and defines.
+ *
+ * Hypervisor calls are made via traps to software traps number 0x80
+ * and above.  Registers %o0 to %o5 serve as argument, status, and
+ * return value registers.
+ *
+ * There are two kinds of these traps.  First there are the normal
+ * "fast traps" which use software trap 0x80 and encode the function
+ * to invoke by number in register %o5.  Argument and return value
+ * handling is as follows:
+ *
+ * -----------------------------------------------
+ * |  %o5  | function number |     undefined     |
+ * |  %o0  |   argument 0    |   return status   |
+ * |  %o1  |   argument 1    |   return value 1  |
+ * |  %o2  |   argument 2    |   return value 2  |
+ * |  %o3  |   argument 3    |   return value 3  |
+ * |  %o4  |   argument 4    |   return value 4  |
+ * -----------------------------------------------
+ *
+ * The second type are "hyper-fast traps" which encode the function
+ * number in the software trap number itself.  So these use trap
+ * numbers > 0x80.  The register usage for hyper-fast traps is as
+ * follows:
+ *
+ * -----------------------------------------------
+ * |  %o0  |   argument 0    |   return status   |
+ * |  %o1  |   argument 1    |   return value 1  |
+ * |  %o2  |   argument 2    |   return value 2  |
+ * |  %o3  |   argument 3    |   return value 3  |
+ * |  %o4  |   argument 4    |   return value 4  |
+ * -----------------------------------------------
+ *
+ * Registers providing explicit arguments to the hypervisor calls
+ * are volatile across the call.  Upon return their values are
+ * undefined unless explicitly specified as containing a particular
+ * return value by the specific call.  The return status is always
+ * returned in register %o0, zero indicates a successful execution of
+ * the hypervisor call and other values indicate an error status as
+ * defined below.  So, for example, if a hyper-fast trap takes
+ * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across
+ * the call and %o3, %o4, and %o5 would be preserved.
+ *
+ * If the hypervisor trap is invalid, or the fast trap function number
+ * is invalid, HV_EBADTRAP will be returned in %o0.  Also, all 64-bits
+ * of the argument and return values are significant.
+ */
+
+/* Trap numbers.  */
+#define HV_FAST_TRAP            0x80
+#define HV_MMU_MAP_ADDR_TRAP    0x83
+#define HV_MMU_UNMAP_ADDR_TRAP  0x84
+#define HV_TTRACE_ADDENTRY_TRAP 0x85
+#define HV_CORE_TRAP            0xff
+
+/* Error codes.  */
+#define HV_EOK                          0  /* Successful return            */
+#define HV_ENOCPU                       1  /* Invalid CPU id               */
+#define HV_ENORADDR                     2  /* Invalid real address         */
+#define HV_ENOINTR                      3  /* Invalid interrupt id         */
+#define HV_EBADPGSZ                     4  /* Invalid pagesize encoding    */
+#define HV_EBADTSB                      5  /* Invalid TSB description      */
+#define HV_EINVAL                       6  /* Invalid argument             */
+#define HV_EBADTRAP                     7  /* Invalid function number      */
+#define HV_EBADALIGN                    8  /* Invalid address alignment    */
+#define HV_EWOULDBLOCK                  9  /* Cannot complete w/o blocking */
+#define HV_ENOACCESS                    10 /* No access to resource        */
+#define HV_EIO                          11 /* I/O error                    */
+#define HV_ECPUERROR                    12 /* CPU in error state           */
+#define HV_ENOTSUPPORTED                13 /* Function not supported       */
+#define HV_ENOMAP                       14 /* No mapping found             */
+#define HV_ETOOMANY                     15 /* Too many items specified     */
+#define HV_ECHANNEL                     16 /* Invalid LDC channel          */
+#define HV_EBUSY                        17 /* Resource busy                */
+
+/* mach_exit()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MACH_EXIT
+ * ARG0:        exit code
+ * ERRORS:      This service does not return.
+ *
+ * Stop all CPUs in the virtual domain and place them into the stopped
+ * state.  The 64-bit exit code may be passed to a service entity as
+ * the domain's exit status.  On systems without a service entity, the
+ * domain will undergo a reset, and the boot firmware will be
+ * reloaded.
+ *
+ * This function will never return to the guest that invokes it.
+ *
+ * Note: By convention an exit code of zero denotes a successful exit by
+ *       the guest code.  A non-zero exit code denotes a guest specific
+ *       error indication.
+ *
+ */
+#define HV_FAST_MACH_EXIT               0x00
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mach_exit(unsigned long exit_code);
+#endif
+
+/* Domain services.  */
+
+/* mach_desc()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MACH_DESC
+ * ARG0:        buffer
+ * ARG1:        length
+ * RET0:        status
+ * RET1:        length
+ * ERRORS:      HV_EBADALIGN    Buffer is badly aligned
+ *              HV_ENORADDR     Buffer is to an illegal real address.
+ *              HV_EINVAL       Buffer length is too small for complete
+ *                              machine description.
+ *
+ * Copy the most current machine description into the buffer indicated
+ * by the real address in ARG0.  The buffer provided must be 16 byte
+ * aligned.  Upon success or HV_EINVAL, this service returns the
+ * actual size of the machine description in the RET1 return value.
+ *
+ * Note: A method of determining the appropriate buffer size for the
+ *       machine description is to first call this service with a buffer
+ *       length of 0 bytes.
+ */
+#define HV_FAST_MACH_DESC               0x01
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_desc(unsigned long buffer_pa,
+                                     unsigned long buf_len,
+                                     unsigned long *real_buf_len);
+#endif
+
+/* mach_sir()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MACH_SIR
+ * ERRORS:      This service does not return.
+ *
+ * Perform a software initiated reset of the virtual machine domain.
+ * All CPUs are captured as soon as possible, all hardware devices are
+ * returned to the entry default state, and the domain is restarted at
+ * the SIR (trap type 0x04) real trap table (RTBA) entry point on one
+ * of the CPUs.  The single CPU restarted is selected as determined by
+ * platform specific policy.  Memory is preserved across this
+ * operation.
+ */
+#define HV_FAST_MACH_SIR                0x02
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mach_sir(void);
+#endif
+
+/* mach_set_watchdog()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MACH_SET_WATCHDOG
+ * ARG0:        timeout in milliseconds
+ * RET0:        status
+ * RET1:        time remaining in milliseconds
+ *
+ * A guest uses this API to set a watchdog timer.  Once the gues has set
+ * the timer, it must call the timer service again either to disable or
+ * postpone the expiration.  If the timer expires before being reset or
+ * disabled, then the hypervisor take a platform specific action leading
+ * to guest termination within a bounded time period.  The platform action
+ * may include recovery actions such as reporting the expiration to a
+ * Service Processor, and/or automatically restarting the gues.
+ *
+ * The 'timeout' parameter is specified in milliseconds, however the
+ * implementated granularity is given by the 'watchdog-resolution'
+ * property in the 'platform' node of the guest's machine description.
+ * The largest allowed timeout value is specified by the
+ * 'watchdog-max-timeout' property of the 'platform' node.
+ *
+ * If the 'timeout' argument is not zero, the watchdog timer is set to
+ * expire after a minimum of 'timeout' milliseconds.
+ *
+ * If the 'timeout' argument is zero, the watchdog timer is disabled.
+ *
+ * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout'
+ * property, the hypervisor leaves the watchdog timer state unchanged,
+ * and returns a status of EINVAL.
+ *
+ * The 'time remaining' return value is valid regardless of whether the
+ * return status is EOK or EINVAL.  A non-zero return value indicates the
+ * number of milliseconds that were remaining until the timer was to expire.
+ * If less than one millisecond remains, the return value is '1'.  If the
+ * watchdog timer was disabled at the time of the call, the return value is
+ * zero.
+ *
+ * If the hypervisor cannot support the exact timeout value requested, but
+ * can support a larger timeout value, the hypervisor may round the actual
+ * timeout to a value larger than the requested timeout, consequently the
+ * 'time remaining' return value may be larger than the previously requested
+ * timeout value.
+ *
+ * Any guest OS debugger should be aware that the watchdog service may be in
+ * use.  Consequently, it is recommended that the watchdog service is
+ * disabled upon debugger entry (e.g. reaching a breakpoint), and then
+ * re-enabled upon returning to normal execution.  The API has been designed
+ * with this in mind, and the 'time remaining' result of the disable call may
+ * be used directly as the timeout argument of the re-enable call.
+ */
+#define HV_FAST_MACH_SET_WATCHDOG       0x05
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout,
+                                             unsigned long *orig_timeout);
+#endif
+
+/* CPU services.
+ *
+ * CPUs represent devices that can execute software threads.  A single
+ * chip that contains multiple cores or strands is represented as
+ * multiple CPUs with unique CPU identifiers.  CPUs are exported to
+ * OBP via the machine description (and to the OS via the OBP device
+ * tree).  CPUs are always in one of three states: stopped, running,
+ * or error.
+ *
+ * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a
+ * CPU within a logical domain.  Operations that are to be performed
+ * on multiple CPUs specify them via a CPU list.  A CPU list is an
+ * array in real memory, of which each 16-bit word is a CPU ID.  CPU
+ * lists are passed through the API as two arguments.  The first is
+ * the number of entries (16-bit words) in the CPU list, and the
+ * second is the (real address) pointer to the CPU ID list.
+ */
+
+/* cpu_start()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CPU_START
+ * ARG0:        CPU ID
+ * ARG1:        PC
+ * ARG2:        RTBA
+ * ARG3:        target ARG0
+ * RET0:        status
+ * ERRORS:      ENOCPU          Invalid CPU ID
+ *              EINVAL          Target CPU ID is not in the stopped state
+ *              ENORADDR        Invalid PC or RTBA real address
+ *              EBADALIGN       Unaligned PC or unaligned RTBA
+ *              EWOULDBLOCK     Starting resources are not available
+ *
+ * Start CPU with given CPU ID with PC in %pc and with a real trap
+ * base address value of RTBA.  The indicated CPU must be in the
+ * stopped state.  The supplied RTBA must be aligned on a 256 byte
+ * boundary.  On successful completion, the specified CPU will be in
+ * the running state and will be supplied with "target ARG0" in %o0
+ * and RTBA in %tba.
+ */
+#define HV_FAST_CPU_START               0x10
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_start(unsigned long cpuid,
+                                     unsigned long pc,
+                                     unsigned long rtba,
+                                     unsigned long arg0);
+#endif
+
+/* cpu_stop()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CPU_STOP
+ * ARG0:        CPU ID
+ * RET0:        status
+ * ERRORS:      ENOCPU          Invalid CPU ID
+ *              EINVAL          Target CPU ID is the current cpu
+ *              EINVAL          Target CPU ID is not in the running state
+ *              EWOULDBLOCK     Stopping resources are not available
+ *              ENOTSUPPORTED   Not supported on this platform
+ *
+ * The specified CPU is stopped.  The indicated CPU must be in the
+ * running state.  On completion, it will be in the stopped state.  It
+ * is not legal to stop the current CPU.
+ *
+ * Note: As this service cannot be used to stop the current cpu, this service
+ *       may not be used to stop the last running CPU in a domain.  To stop
+ *       and exit a running domain, a guest must use the mach_exit() service.
+ */
+#define HV_FAST_CPU_STOP                0x11
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_stop(unsigned long cpuid);
+#endif
+
+/* cpu_yield()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CPU_YIELD
+ * RET0:        status
+ * ERRORS:      No possible error.
+ *
+ * Suspend execution on the current CPU.  Execution will resume when
+ * an interrupt (device, %stick_compare, or cross-call) is targeted to
+ * the CPU.  On some CPUs, this API may be used by the hypervisor to
+ * save power by disabling hardware strands.
+ */
+#define HV_FAST_CPU_YIELD               0x12
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_yield(void);
+#endif
+
+/* cpu_qconf()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CPU_QCONF
+ * ARG0:        queue
+ * ARG1:        base real address
+ * ARG2:        number of entries
+ * RET0:        status
+ * ERRORS:      ENORADDR        Invalid base real address
+ *              EINVAL          Invalid queue or number of entries is less
+ *                              than 2 or too large.
+ *              EBADALIGN       Base real address is not correctly aligned
+ *                              for size.
+ *
+ * Configure the given queue to be placed at the given base real
+ * address, with the given number of entries.  The number of entries
+ * must be a power of 2.  The base real address must be aligned
+ * exactly to match the queue size.  Each queue entry is 64 bytes
+ * long, so for example a 32 entry queue must be aligned on a 2048
+ * byte real address boundary.
+ *
+ * The specified queue is unconfigured if the number of entries is given
+ * as zero.
+ *
+ * For the current version of this API service, the argument queue is defined
+ * as follows:
+ *
+ *      queue           description
+ *      -----           -------------------------
+ *      0x3c            cpu mondo queue
+ *      0x3d            device mondo queue
+ *      0x3e            resumable error queue
+ *      0x3f            non-resumable error queue
+ *
+ * Note: The maximum number of entries for each queue for a specific cpu may
+ *       be determined from the machine description.
+ */
+#define HV_FAST_CPU_QCONF               0x14
+#define  HV_CPU_QUEUE_CPU_MONDO          0x3c
+#define  HV_CPU_QUEUE_DEVICE_MONDO       0x3d
+#define  HV_CPU_QUEUE_RES_ERROR          0x3e
+#define  HV_CPU_QUEUE_NONRES_ERROR       0x3f
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_qconf(unsigned long type,
+                                     unsigned long queue_paddr,
+                                     unsigned long num_queue_entries);
+#endif
+
+/* cpu_qinfo()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CPU_QINFO
+ * ARG0:        queue
+ * RET0:        status
+ * RET1:        base real address
+ * RET1:        number of entries
+ * ERRORS:      EINVAL          Invalid queue
+ *
+ * Return the configuration info for the given queue.  The base real
+ * address and number of entries of the defined queue are returned.
+ * The queue argument values are the same as for cpu_qconf() above.
+ *
+ * If the specified queue is a valid queue number, but no queue has
+ * been defined, the number of entries will be set to zero and the
+ * base real address returned is undefined.
+ */
+#define HV_FAST_CPU_QINFO               0x15
+
+/* cpu_mondo_send()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CPU_MONDO_SEND
+ * ARG0-1:      CPU list
+ * ARG2:        data real address
+ * RET0:        status
+ * ERRORS:      EBADALIGN       Mondo data is not 64-byte aligned or CPU list
+ *                              is not 2-byte aligned.
+ *              ENORADDR        Invalid data mondo address, or invalid cpu list
+ *                              address.
+ *              ENOCPU          Invalid cpu in CPU list
+ *              EWOULDBLOCK     Some or all of the listed CPUs did not receive
+ *                              the mondo
+ *              ECPUERROR       One or more of the listed CPUs are in error
+ *                              state, use HV_FAST_CPU_STATE to see which ones
+ *              EINVAL          CPU list includes caller's CPU ID
+ *
+ * Send a mondo interrupt to the CPUs in the given CPU list with the
+ * 64-bytes at the given data real address.  The data must be 64-byte
+ * aligned.  The mondo data will be delivered to the cpu_mondo queues
+ * of the recipient CPUs.
+ *
+ * In all cases, error or not, the CPUs in the CPU list to which the
+ * mondo has been successfully delivered will be indicated by having
+ * their entry in CPU list updated with the value 0xffff.
+ */
+#define HV_FAST_CPU_MONDO_SEND          0x42
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa);
+#endif
+
+/* cpu_myid()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CPU_MYID
+ * RET0:        status
+ * RET1:        CPU ID
+ * ERRORS:      No errors defined.
+ *
+ * Return the hypervisor ID handle for the current CPU.  Use by a
+ * virtual CPU to discover it's own identity.
+ */
+#define HV_FAST_CPU_MYID                0x16
+
+/* cpu_state()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CPU_STATE
+ * ARG0:        CPU ID
+ * RET0:        status
+ * RET1:        state
+ * ERRORS:      ENOCPU          Invalid CPU ID
+ *
+ * Retrieve the current state of the CPU with the given CPU ID.
+ */
+#define HV_FAST_CPU_STATE               0x17
+#define  HV_CPU_STATE_STOPPED            0x01
+#define  HV_CPU_STATE_RUNNING            0x02
+#define  HV_CPU_STATE_ERROR              0x03
+
+#ifndef __ASSEMBLY__
+extern long sun4v_cpu_state(unsigned long cpuid);
+#endif
+
+/* cpu_set_rtba()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CPU_SET_RTBA
+ * ARG0:        RTBA
+ * RET0:        status
+ * RET1:        previous RTBA
+ * ERRORS:      ENORADDR        Invalid RTBA real address
+ *              EBADALIGN       RTBA is incorrectly aligned for a trap table
+ *
+ * Set the real trap base address of the local cpu to the given RTBA.
+ * The supplied RTBA must be aligned on a 256 byte boundary.  Upon
+ * success the previous value of the RTBA is returned in RET1.
+ *
+ * Note: This service does not affect %tba
+ */
+#define HV_FAST_CPU_SET_RTBA            0x18
+
+/* cpu_set_rtba()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CPU_GET_RTBA
+ * RET0:        status
+ * RET1:        previous RTBA
+ * ERRORS:      No possible error.
+ *
+ * Returns the current value of RTBA in RET1.
+ */
+#define HV_FAST_CPU_GET_RTBA            0x19
+
+/* MMU services.
+ *
+ * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls.
+ */
+#ifndef __ASSEMBLY__
+struct hv_tsb_descr {
+        unsigned short          pgsz_idx;
+        unsigned short          assoc;
+        unsigned int            num_ttes;       /* in TTEs */
+        unsigned int            ctx_idx;
+        unsigned int            pgsz_mask;
+        unsigned long           tsb_base;
+        unsigned long           resv;
+};
+#endif
+#define HV_TSB_DESCR_PGSZ_IDX_OFFSET    0x00
+#define HV_TSB_DESCR_ASSOC_OFFSET       0x02
+#define HV_TSB_DESCR_NUM_TTES_OFFSET    0x04
+#define HV_TSB_DESCR_CTX_IDX_OFFSET     0x08
+#define HV_TSB_DESCR_PGSZ_MASK_OFFSET   0x0c
+#define HV_TSB_DESCR_TSB_BASE_OFFSET    0x10
+#define HV_TSB_DESCR_RESV_OFFSET        0x18
+
+/* Page size bitmask.  */
+#define HV_PGSZ_MASK_8K                 (1 << 0)
+#define HV_PGSZ_MASK_64K                (1 << 1)
+#define HV_PGSZ_MASK_512K               (1 << 2)
+#define HV_PGSZ_MASK_4MB                (1 << 3)
+#define HV_PGSZ_MASK_32MB               (1 << 4)
+#define HV_PGSZ_MASK_256MB              (1 << 5)
+#define HV_PGSZ_MASK_2GB                (1 << 6)
+#define HV_PGSZ_MASK_16GB               (1 << 7)
+
+/* Page size index.  The value given in the TSB descriptor must correspond
+ * to the smallest page size specified in the pgsz_mask page size bitmask.
+ */
+#define HV_PGSZ_IDX_8K                  0
+#define HV_PGSZ_IDX_64K                 1
+#define HV_PGSZ_IDX_512K                2
+#define HV_PGSZ_IDX_4MB                 3
+#define HV_PGSZ_IDX_32MB                4
+#define HV_PGSZ_IDX_256MB               5
+#define HV_PGSZ_IDX_2GB                 6
+#define HV_PGSZ_IDX_16GB                7
+
+/* MMU fault status area.
+ *
+ * MMU related faults have their status and fault address information
+ * placed into a memory region made available by privileged code.  Each
+ * virtual processor must make a mmu_fault_area_conf() call to tell the
+ * hypervisor where that processor's fault status should be stored.
+ *
+ * The fault status block is a multiple of 64-bytes and must be aligned
+ * on a 64-byte boundary.
+ */
+#ifndef __ASSEMBLY__
+struct hv_fault_status {
+        unsigned long           i_fault_type;
+        unsigned long           i_fault_addr;
+        unsigned long           i_fault_ctx;
+        unsigned long           i_reserved[5];
+        unsigned long           d_fault_type;
+        unsigned long           d_fault_addr;
+        unsigned long           d_fault_ctx;
+        unsigned long           d_reserved[5];
+};
+#endif
+#define HV_FAULT_I_TYPE_OFFSET  0x00
+#define HV_FAULT_I_ADDR_OFFSET  0x08
+#define HV_FAULT_I_CTX_OFFSET   0x10
+#define HV_FAULT_D_TYPE_OFFSET  0x40
+#define HV_FAULT_D_ADDR_OFFSET  0x48
+#define HV_FAULT_D_CTX_OFFSET   0x50
+
+#define HV_FAULT_TYPE_FAST_MISS 1
+#define HV_FAULT_TYPE_FAST_PROT 2
+#define HV_FAULT_TYPE_MMU_MISS  3
+#define HV_FAULT_TYPE_INV_RA    4
+#define HV_FAULT_TYPE_PRIV_VIOL 5
+#define HV_FAULT_TYPE_PROT_VIOL 6
+#define HV_FAULT_TYPE_NFO       7
+#define HV_FAULT_TYPE_NFO_SEFF  8
+#define HV_FAULT_TYPE_INV_VA    9
+#define HV_FAULT_TYPE_INV_ASI   10
+#define HV_FAULT_TYPE_NC_ATOMIC 11
+#define HV_FAULT_TYPE_PRIV_ACT  12
+#define HV_FAULT_TYPE_RESV1     13
+#define HV_FAULT_TYPE_UNALIGNED 14
+#define HV_FAULT_TYPE_INV_PGSZ  15
+/* Values 16 --> -2 are reserved.  */
+#define HV_FAULT_TYPE_MULTIPLE  -1
+
+/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(),
+ * and mmu_{map,unmap}_perm_addr().
+ */
+#define HV_MMU_DMMU                     0x01
+#define HV_MMU_IMMU                     0x02
+#define HV_MMU_ALL                      (HV_MMU_DMMU | HV_MMU_IMMU)
+
+/* mmu_map_addr()
+ * TRAP:        HV_MMU_MAP_ADDR_TRAP
+ * ARG0:        virtual address
+ * ARG1:        mmu context
+ * ARG2:        TTE
+ * ARG3:        flags (HV_MMU_{IMMU,DMMU})
+ * ERRORS:      EINVAL          Invalid virtual address, mmu context, or flags
+ *              EBADPGSZ        Invalid page size value
+ *              ENORADDR        Invalid real address in TTE
+ *
+ * Create a non-permanent mapping using the given TTE, virtual
+ * address, and mmu context.  The flags argument determines which
+ * (data, or instruction, or both) TLB the mapping gets loaded into.
+ *
+ * The behavior is undefined if the valid bit is clear in the TTE.
+ *
+ * Note: This API call is for privileged code to specify temporary translation
+ *       mappings without the need to create and manage a TSB.
+ */
+
+/* mmu_unmap_addr()
+ * TRAP:        HV_MMU_UNMAP_ADDR_TRAP
+ * ARG0:        virtual address
+ * ARG1:        mmu context
+ * ARG2:        flags (HV_MMU_{IMMU,DMMU})
+ * ERRORS:      EINVAL          Invalid virtual address, mmu context, or flags
+ *
+ * Demaps the given virtual address in the given mmu context on this
+ * CPU.  This function is intended to be used to demap pages mapped
+ * with mmu_map_addr.  This service is equivalent to invoking
+ * mmu_demap_page() with only the current CPU in the CPU list. The
+ * flags argument determines which (data, or instruction, or both) TLB
+ * the mapping gets unmapped from.
+ *
+ * Attempting to perform an unmap operation for a previously defined
+ * permanent mapping will have undefined results.
+ */
+
+/* mmu_tsb_ctx0()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_TSB_CTX0
+ * ARG0:        number of TSB descriptions
+ * ARG1:        TSB descriptions pointer
+ * RET0:        status
+ * ERRORS:      ENORADDR                Invalid TSB descriptions pointer or
+ *                                      TSB base within a descriptor
+ *              EBADALIGN               TSB descriptions pointer is not aligned
+ *                                      to an 8-byte boundary, or TSB base
+ *                                      within a descriptor is not aligned for
+ *                                      the given TSB size
+ *              EBADPGSZ                Invalid page size in a TSB descriptor
+ *              EBADTSB                 Invalid associativity or size in a TSB
+ *                                      descriptor
+ *              EINVAL                  Invalid number of TSB descriptions, or
+ *                                      invalid context index in a TSB
+ *                                      descriptor, or index page size not
+ *                                      equal to smallest page size in page
+ *                                      size bitmask field.
+ *
+ * Configures the TSBs for the current CPU for virtual addresses with
+ * context zero.  The TSB descriptions pointer is a pointer to an
+ * array of the given number of TSB descriptions.
+ *
+ * Note: The maximum number of TSBs available to a virtual CPU is given by the
+ *       mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the
+ *       machine description.
+ */
+#define HV_FAST_MMU_TSB_CTX0            0x20
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions,
+                                        unsigned long tsb_desc_ra);
+#endif
+
+/* mmu_tsb_ctxnon0()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_TSB_CTXNON0
+ * ARG0:        number of TSB descriptions
+ * ARG1:        TSB descriptions pointer
+ * RET0:        status
+ * ERRORS:      Same as for mmu_tsb_ctx0() above.
+ *
+ * Configures the TSBs for the current CPU for virtual addresses with
+ * non-zero contexts.  The TSB descriptions pointer is a pointer to an
+ * array of the given number of TSB descriptions.
+ *
+ * Note: A maximum of 16 TSBs may be specified in the TSB description list.
+ */
+#define HV_FAST_MMU_TSB_CTXNON0         0x21
+
+/* mmu_demap_page()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_DEMAP_PAGE
+ * ARG0:        reserved, must be zero
+ * ARG1:        reserved, must be zero
+ * ARG2:        virtual address
+ * ARG3:        mmu context
+ * ARG4:        flags (HV_MMU_{IMMU,DMMU})
+ * RET0:        status
+ * ERRORS:      EINVAL                  Invalid virutal address, context, or
+ *                                      flags value
+ *              ENOTSUPPORTED           ARG0 or ARG1 is non-zero
+ *
+ * Demaps any page mapping of the given virtual address in the given
+ * mmu context for the current virtual CPU.  Any virtually tagged
+ * caches are guaranteed to be kept consistent.  The flags argument
+ * determines which TLB (instruction, or data, or both) participate in
+ * the operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_PAGE          0x22
+
+/* mmu_demap_ctx()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_DEMAP_CTX
+ * ARG0:        reserved, must be zero
+ * ARG1:        reserved, must be zero
+ * ARG2:        mmu context
+ * ARG3:        flags (HV_MMU_{IMMU,DMMU})
+ * RET0:        status
+ * ERRORS:      EINVAL                  Invalid context or flags value
+ *              ENOTSUPPORTED           ARG0 or ARG1 is non-zero
+ *
+ * Demaps all non-permanent virtual page mappings previously specified
+ * for the given context for the current virtual CPU.  Any virtual
+ * tagged caches are guaranteed to be kept consistent.  The flags
+ * argument determines which TLB (instruction, or data, or both)
+ * participate in the operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_CTX           0x23
+
+/* mmu_demap_all()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_DEMAP_ALL
+ * ARG0:        reserved, must be zero
+ * ARG1:        reserved, must be zero
+ * ARG2:        flags (HV_MMU_{IMMU,DMMU})
+ * RET0:        status
+ * ERRORS:      EINVAL                  Invalid flags value
+ *              ENOTSUPPORTED           ARG0 or ARG1 is non-zero
+ *
+ * Demaps all non-permanent virtual page mappings previously specified
+ * for the current virtual CPU.  Any virtual tagged caches are
+ * guaranteed to be kept consistent.  The flags argument determines
+ * which TLB (instruction, or data, or both) participate in the
+ * operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_ALL           0x24
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mmu_demap_all(void);
+#endif
+
+/* mmu_map_perm_addr()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_MAP_PERM_ADDR
+ * ARG0:        virtual address
+ * ARG1:        reserved, must be zero
+ * ARG2:        TTE
+ * ARG3:        flags (HV_MMU_{IMMU,DMMU})
+ * RET0:        status
+ * ERRORS:      EINVAL                  Invalid virutal address or flags value
+ *              EBADPGSZ                Invalid page size value
+ *              ENORADDR                Invalid real address in TTE
+ *              ETOOMANY                Too many mappings (max of 8 reached)
+ *
+ * Create a permanent mapping using the given TTE and virtual address
+ * for context 0 on the calling virtual CPU.  A maximum of 8 such
+ * permanent mappings may be specified by privileged code.  Mappings
+ * may be removed with mmu_unmap_perm_addr().
+ *
+ * The behavior is undefined if a TTE with the valid bit clear is given.
+ *
+ * Note: This call is used to specify address space mappings for which
+ *       privileged code does not expect to receive misses.  For example,
+ *       this mechanism can be used to map kernel nucleus code and data.
+ */
+#define HV_FAST_MMU_MAP_PERM_ADDR       0x25
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr,
+                                             unsigned long set_to_zero,
+                                             unsigned long tte,
+                                             unsigned long flags);
+#endif
+
+/* mmu_fault_area_conf()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_FAULT_AREA_CONF
+ * ARG0:        real address
+ * RET0:        status
+ * RET1:        previous mmu fault area real address
+ * ERRORS:      ENORADDR                Invalid real address
+ *              EBADALIGN               Invalid alignment for fault area
+ *
+ * Configure the MMU fault status area for the calling CPU.  A 64-byte
+ * aligned real address specifies where MMU fault status information
+ * is placed.  The return value is the previously specified area, or 0
+ * for the first invocation.  Specifying a fault area at real address
+ * 0 is not allowed.
+ */
+#define HV_FAST_MMU_FAULT_AREA_CONF     0x26
+
+/* mmu_enable()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_ENABLE
+ * ARG0:        enable flag
+ * ARG1:        return target address
+ * RET0:        status
+ * ERRORS:      ENORADDR                Invalid real address when disabling
+ *                                      translation.
+ *              EBADALIGN               The return target address is not
+ *                                      aligned to an instruction.
+ *              EINVAL                  The enable flag request the current
+ *                                      operating mode (e.g. disable if already
+ *                                      disabled)
+ *
+ * Enable or disable virtual address translation for the calling CPU
+ * within the virtual machine domain.  If the enable flag is zero,
+ * translation is disabled, any non-zero value will enable
+ * translation.
+ *
+ * When this function returns, the newly selected translation mode
+ * will be active.  If the mmu is being enabled, then the return
+ * target address is a virtual address else it is a real address.
+ *
+ * Upon successful completion, control will be returned to the given
+ * return target address (ie. the cpu will jump to that address).  On
+ * failure, the previous mmu mode remains and the trap simply returns
+ * as normal with the appropriate error code in RET0.
+ */
+#define HV_FAST_MMU_ENABLE              0x27
+
+/* mmu_unmap_perm_addr()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_UNMAP_PERM_ADDR
+ * ARG0:        virtual address
+ * ARG1:        reserved, must be zero
+ * ARG2:        flags (HV_MMU_{IMMU,DMMU})
+ * RET0:        status
+ * ERRORS:      EINVAL                  Invalid virutal address or flags value
+ *              ENOMAP                  Specified mapping was not found
+ *
+ * Demaps any permanent page mapping (established via
+ * mmu_map_perm_addr()) at the given virtual address for context 0 on
+ * the current virtual CPU.  Any virtual tagged caches are guaranteed
+ * to be kept consistent.
+ */
+#define HV_FAST_MMU_UNMAP_PERM_ADDR     0x28
+
+/* mmu_tsb_ctx0_info()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_TSB_CTX0_INFO
+ * ARG0:        max TSBs
+ * ARG1:        buffer pointer
+ * RET0:        status
+ * RET1:        number of TSBs
+ * ERRORS:      EINVAL                  Supplied buffer is too small
+ *              EBADALIGN               The buffer pointer is badly aligned
+ *              ENORADDR                Invalid real address for buffer pointer
+ *
+ * Return the TSB configuration as previous defined by mmu_tsb_ctx0()
+ * into the provided buffer.  The size of the buffer is given in ARG1
+ * in terms of the number of TSB description entries.
+ *
+ * Upon return, RET1 always contains the number of TSB descriptions
+ * previously configured.  If zero TSBs were configured, EOK is
+ * returned with RET1 containing 0.
+ */
+#define HV_FAST_MMU_TSB_CTX0_INFO       0x29
+
+/* mmu_tsb_ctxnon0_info()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_TSB_CTXNON0_INFO
+ * ARG0:        max TSBs
+ * ARG1:        buffer pointer
+ * RET0:        status
+ * RET1:        number of TSBs
+ * ERRORS:      EINVAL                  Supplied buffer is too small
+ *              EBADALIGN               The buffer pointer is badly aligned
+ *              ENORADDR                Invalid real address for buffer pointer
+ *
+ * Return the TSB configuration as previous defined by
+ * mmu_tsb_ctxnon0() into the provided buffer.  The size of the buffer
+ * is given in ARG1 in terms of the number of TSB description entries.
+ *
+ * Upon return, RET1 always contains the number of TSB descriptions
+ * previously configured.  If zero TSBs were configured, EOK is
+ * returned with RET1 containing 0.
+ */
+#define HV_FAST_MMU_TSB_CTXNON0_INFO    0x2a
+
+/* mmu_fault_area_info()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMU_FAULT_AREA_INFO
+ * RET0:        status
+ * RET1:        fault area real address
+ * ERRORS:      No errors defined.
+ *
+ * Return the currently defined MMU fault status area for the current
+ * CPU.  The real address of the fault status area is returned in
+ * RET1, or 0 is returned in RET1 if no fault status area is defined.
+ *
+ * Note: mmu_fault_area_conf() may be called with the return value (RET1)
+ *       from this service if there is a need to save and restore the fault
+ *       area for a cpu.
+ */
+#define HV_FAST_MMU_FAULT_AREA_INFO     0x2b
+
+/* Cache and Memory services. */
+
+/* mem_scrub()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MEM_SCRUB
+ * ARG0:        real address
+ * ARG1:        length
+ * RET0:        status
+ * RET1:        length scrubbed
+ * ERRORS:      ENORADDR        Invalid real address
+ *              EBADALIGN       Start address or length are not correctly
+ *                              aligned
+ *              EINVAL          Length is zero
+ *
+ * Zero the memory contents in the range real address to real address
+ * plus length minus 1.  Also, valid ECC will be generated for that
+ * memory address range.  Scrubbing is started at the given real
+ * address, but may not scrub the entire given length.  The actual
+ * length scrubbed will be returned in RET1.
+ *
+ * The real address and length must be aligned on an 8K boundary, or
+ * contain the start address and length from a sun4v error report.
+ *
+ * Note: There are two uses for this function.  The first use is to block clear
+ *       and initialize memory and the second is to scrub an u ncorrectable
+ *       error reported via a resumable or non-resumable trap.  The second
+ *       use requires the arguments to be equal to the real address and length
+ *       provided in a sun4v memory error report.
+ */
+#define HV_FAST_MEM_SCRUB               0x31
+
+/* mem_sync()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MEM_SYNC
+ * ARG0:        real address
+ * ARG1:        length
+ * RET0:        status
+ * RET1:        length synced
+ * ERRORS:      ENORADDR        Invalid real address
+ *              EBADALIGN       Start address or length are not correctly
+ *                              aligned
+ *              EINVAL          Length is zero
+ *
+ * Force the next access within the real address to real address plus
+ * length minus 1 to be fetches from main system memory.  Less than
+ * the given length may be synced, the actual amount synced is
+ * returned in RET1.  The real address and length must be aligned on
+ * an 8K boundary.
+ */
+#define HV_FAST_MEM_SYNC                0x32
+
+/* Time of day services.
+ *
+ * The hypervisor maintains the time of day on a per-domain basis.
+ * Changing the time of day in one domain does not affect the time of
+ * day on any other domain.
+ *
+ * Time is described by a single unsigned 64-bit word which is the
+ * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1,
+ * 1970).
+ */
+
+/* tod_get()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_TOD_GET
+ * RET0:        status
+ * RET1:        TOD
+ * ERRORS:      EWOULDBLOCK     TOD resource is temporarily unavailable
+ *              ENOTSUPPORTED   If TOD not supported on this platform
+ *
+ * Return the current time of day.  May block if TOD access is
+ * temporarily not possible.
+ */
+#define HV_FAST_TOD_GET                 0x50
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_tod_get(unsigned long *time);
+#endif
+
+/* tod_set()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_TOD_SET
+ * ARG0:        TOD
+ * RET0:        status
+ * ERRORS:      EWOULDBLOCK     TOD resource is temporarily unavailable
+ *              ENOTSUPPORTED   If TOD not supported on this platform
+ *
+ * The current time of day is set to the value specified in ARG0.  May
+ * block if TOD access is temporarily not possible.
+ */
+#define HV_FAST_TOD_SET                 0x51
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_tod_set(unsigned long time);
+#endif
+
+/* Console services */
+
+/* con_getchar()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CONS_GETCHAR
+ * RET0:        status
+ * RET1:        character
+ * ERRORS:      EWOULDBLOCK     No character available.
+ *
+ * Returns a character from the console device.  If no character is
+ * available then an EWOULDBLOCK error is returned.  If a character is
+ * available, then the returned status is EOK and the character value
+ * is in RET1.
+ *
+ * A virtual BREAK is represented by the 64-bit value -1.
+ *
+ * A virtual HUP signal is represented by the 64-bit value -2.
+ */
+#define HV_FAST_CONS_GETCHAR            0x60
+
+/* con_putchar()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CONS_PUTCHAR
+ * ARG0:        character
+ * RET0:        status
+ * ERRORS:      EINVAL          Illegal character
+ *              EWOULDBLOCK     Output buffer currently full, would block
+ *
+ * Send a character to the console device.  Only character values
+ * between 0 and 255 may be used.  Values outside this range are
+ * invalid except for the 64-bit value -1 which is used to send a
+ * virtual BREAK.
+ */
+#define HV_FAST_CONS_PUTCHAR            0x61
+
+/* con_read()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CONS_READ
+ * ARG0:        buffer real address
+ * ARG1:        buffer size in bytes
+ * RET0:        status
+ * RET1:        bytes read or BREAK or HUP
+ * ERRORS:      EWOULDBLOCK     No character available.
+ *
+ * Reads characters into a buffer from the console device.  If no
+ * character is available then an EWOULDBLOCK error is returned.
+ * If a character is available, then the returned status is EOK
+ * and the number of bytes read into the given buffer is provided
+ * in RET1.
+ *
+ * A virtual BREAK is represented by the 64-bit RET1 value -1.
+ *
+ * A virtual HUP signal is represented by the 64-bit RET1 value -2.
+ *
+ * If BREAK or HUP are indicated, no bytes were read into buffer.
+ */
+#define HV_FAST_CONS_READ               0x62
+
+/* con_write()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_CONS_WRITE
+ * ARG0:        buffer real address
+ * ARG1:        buffer size in bytes
+ * RET0:        status
+ * RET1:        bytes written
+ * ERRORS:      EWOULDBLOCK     Output buffer currently full, would block
+ *
+ * Send a characters in buffer to the console device.  Breaks must be
+ * sent using con_putchar().
+ */
+#define HV_FAST_CONS_WRITE              0x63
+
+#ifndef __ASSEMBLY__
+extern long sun4v_con_getchar(long *status);
+extern long sun4v_con_putchar(long c);
+extern long sun4v_con_read(unsigned long buffer,
+                           unsigned long size,
+                           unsigned long *bytes_read);
+extern unsigned long sun4v_con_write(unsigned long buffer,
+                                     unsigned long size,
+                                     unsigned long *bytes_written);
+#endif
+
+/* mach_set_soft_state()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MACH_SET_SOFT_STATE
+ * ARG0:        software state
+ * ARG1:        software state description pointer
+ * RET0:        status
+ * ERRORS:      EINVAL          software state not valid or software state
+ *                              description is not NULL terminated
+ *              ENORADDR        software state description pointer is not a
+ *                              valid real address
+ *              EBADALIGNED     software state description is not correctly
+ *                              aligned
+ *
+ * This allows the guest to report it's soft state to the hypervisor.  There
+ * are two primary components to this state.  The first part states whether
+ * the guest software is running or not.  The second containts optional
+ * details specific to the software.
+ *
+ * The software state argument is defined below in HV_SOFT_STATE_*, and
+ * indicates whether the guest is operating normally or in a transitional
+ * state.
+ *
+ * The software state description argument is a real address of a data buffer
+ * of size 32-bytes aligned on a 32-byte boundary.  It is treated as a NULL
+ * terminated 7-bit ASCII string of up to 31 characters not including the
+ * NULL termination.
+ */
+#define HV_FAST_MACH_SET_SOFT_STATE     0x70
+#define  HV_SOFT_STATE_NORMAL            0x01
+#define  HV_SOFT_STATE_TRANSITION        0x02
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state,
+                                               unsigned long msg_string_ra);
+#endif
+
+/* mach_get_soft_state()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MACH_GET_SOFT_STATE
+ * ARG0:        software state description pointer
+ * RET0:        status
+ * RET1:        software state
+ * ERRORS:      ENORADDR        software state description pointer is not a
+ *                              valid real address
+ *              EBADALIGNED     software state description is not correctly
+ *                              aligned
+ *
+ * Retrieve the current value of the guest's software state.  The rules
+ * for the software state pointer are the same as for mach_set_soft_state()
+ * above.
+ */
+#define HV_FAST_MACH_GET_SOFT_STATE     0x71
+
+/* svc_send()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_SVC_SEND
+ * ARG0:        service ID
+ * ARG1:        buffer real address
+ * ARG2:        buffer size
+ * RET0:        STATUS
+ * RET1:        sent_bytes
+ *
+ * Be careful, all output registers are clobbered by this operation,
+ * so for example it is not possible to save away a value in %o4
+ * across the trap.
+ */
+#define HV_FAST_SVC_SEND                0x80
+
+/* svc_recv()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_SVC_RECV
+ * ARG0:        service ID
+ * ARG1:        buffer real address
+ * ARG2:        buffer size
+ * RET0:        STATUS
+ * RET1:        recv_bytes
+ *
+ * Be careful, all output registers are clobbered by this operation,
+ * so for example it is not possible to save away a value in %o4
+ * across the trap.
+ */
+#define HV_FAST_SVC_RECV                0x81
+
+/* svc_getstatus()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_SVC_GETSTATUS
+ * ARG0:        service ID
+ * RET0:        STATUS
+ * RET1:        status bits
+ */
+#define HV_FAST_SVC_GETSTATUS           0x82
+
+/* svc_setstatus()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_SVC_SETSTATUS
+ * ARG0:        service ID
+ * ARG1:        bits to set
+ * RET0:        STATUS
+ */
+#define HV_FAST_SVC_SETSTATUS           0x83
+
+/* svc_clrstatus()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_SVC_CLRSTATUS
+ * ARG0:        service ID
+ * ARG1:        bits to clear
+ * RET0:        STATUS
+ */
+#define HV_FAST_SVC_CLRSTATUS           0x84
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_svc_send(unsigned long svc_id,
+                                    unsigned long buffer,
+                                    unsigned long buffer_size,
+                                    unsigned long *sent_bytes);
+extern unsigned long sun4v_svc_recv(unsigned long svc_id,
+                                    unsigned long buffer,
+                                    unsigned long buffer_size,
+                                    unsigned long *recv_bytes);
+extern unsigned long sun4v_svc_getstatus(unsigned long svc_id,
+                                         unsigned long *status_bits);
+extern unsigned long sun4v_svc_setstatus(unsigned long svc_id,
+                                         unsigned long status_bits);
+extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id,
+                                         unsigned long status_bits);
+#endif
+
+/* Trap trace services.
+ *
+ * The hypervisor provides a trap tracing capability for privileged
+ * code running on each virtual CPU.  Privileged code provides a
+ * round-robin trap trace queue within which the hypervisor writes
+ * 64-byte entries detailing hyperprivileged traps taken n behalf of
+ * privileged code.  This is provided as a debugging capability for
+ * privileged code.
+ *
+ * The trap trace control structure is 64-bytes long and placed at the
+ * start (offset 0) of the trap trace buffer, and is described as
+ * follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_trap_trace_control {
+        unsigned long           head_offset;
+        unsigned long           tail_offset;
+        unsigned long           __reserved[0x30 / sizeof(unsigned long)];
+};
+#endif
+#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET  0x00
+#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET  0x08
+
+/* The head offset is the offset of the most recently completed entry
+ * in the trap-trace buffer.  The tail offset is the offset of the
+ * next entry to be written.  The control structure is owned and
+ * modified by the hypervisor.  A guest may not modify the control
+ * structure contents.  Attempts to do so will result in undefined
+ * behavior for the guest.
+ *
+ * Each trap trace buffer entry is layed out as follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_trap_trace_entry {
+        unsigned char   type;           /* Hypervisor or guest entry?   */
+        unsigned char   hpstate;        /* Hyper-privileged state       */
+        unsigned char   tl;             /* Trap level                   */
+        unsigned char   gl;             /* Global register level        */
+        unsigned short  tt;             /* Trap type                    */
+        unsigned short  tag;            /* Extended trap identifier     */
+        unsigned long   tstate;         /* Trap state                   */
+        unsigned long   tick;           /* Tick                         */
+        unsigned long   tpc;            /* Trap PC                      */
+        unsigned long   f1;             /* Entry specific               */
+        unsigned long   f2;             /* Entry specific               */
+        unsigned long   f3;             /* Entry specific               */
+        unsigned long   f4;             /* Entry specific               */
+};
+#endif
+#define HV_TRAP_TRACE_ENTRY_TYPE        0x00
+#define HV_TRAP_TRACE_ENTRY_HPSTATE     0x01
+#define HV_TRAP_TRACE_ENTRY_TL          0x02
+#define HV_TRAP_TRACE_ENTRY_GL          0x03
+#define HV_TRAP_TRACE_ENTRY_TT          0x04
+#define HV_TRAP_TRACE_ENTRY_TAG         0x06
+#define HV_TRAP_TRACE_ENTRY_TSTATE      0x08
+#define HV_TRAP_TRACE_ENTRY_TICK        0x10
+#define HV_TRAP_TRACE_ENTRY_TPC         0x18
+#define HV_TRAP_TRACE_ENTRY_F1          0x20
+#define HV_TRAP_TRACE_ENTRY_F2          0x28
+#define HV_TRAP_TRACE_ENTRY_F3          0x30
+#define HV_TRAP_TRACE_ENTRY_F4          0x38
+
+/* The type field is encoded as follows.  */
+#define HV_TRAP_TYPE_UNDEF              0x00 /* Entry content undefined     */
+#define HV_TRAP_TYPE_HV                 0x01 /* Hypervisor trap entry       */
+#define HV_TRAP_TYPE_GUEST              0xff /* Added via ttrace_addentry() */
+
+/* ttrace_buf_conf()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_TTRACE_BUF_CONF
+ * ARG0:        real address
+ * ARG1:        number of entries
+ * RET0:        status
+ * RET1:        number of entries
+ * ERRORS:      ENORADDR        Invalid real address
+ *              EINVAL          Size is too small
+ *              EBADALIGN       Real address not aligned on 64-byte boundary
+ *
+ * Requests hypervisor trap tracing and declares a virtual CPU's trap
+ * trace buffer to the hypervisor.  The real address supplies the real
+ * base address of the trap trace queue and must be 64-byte aligned.
+ * Specifying a value of 0 for the number of entries disables trap
+ * tracing for the calling virtual CPU.  The buffer allocated must be
+ * sized for a power of two number of 64-byte trap trace entries plus
+ * an initial 64-byte control structure.
+ *
+ * This may be invoked any number of times so that a virtual CPU may
+ * relocate a trap trace buffer or create "snapshots" of information.
+ *
+ * If the real address is illegal or badly aligned, then trap tracing
+ * is disabled and an error is returned.
+ *
+ * Upon failure with EINVAL, this service call returns in RET1 the
+ * minimum number of buffer entries required.  Upon other failures
+ * RET1 is undefined.
+ */
+#define HV_FAST_TTRACE_BUF_CONF         0x90
+
+/* ttrace_buf_info()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_TTRACE_BUF_INFO
+ * RET0:        status
+ * RET1:        real address
+ * RET2:        size
+ * ERRORS:      None defined.
+ *
+ * Returns the size and location of the previously declared trap-trace
+ * buffer.  In the event that no buffer was previously defined, or the
+ * buffer is disabled, this call will return a size of zero bytes.
+ */
+#define HV_FAST_TTRACE_BUF_INFO         0x91
+
+/* ttrace_enable()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_TTRACE_ENABLE
+ * ARG0:        enable
+ * RET0:        status
+ * RET1:        previous enable state
+ * ERRORS:      EINVAL          No trap trace buffer currently defined
+ *
+ * Enable or disable trap tracing, and return the previous enabled
+ * state in RET1.  Future systems may define various flags for the
+ * enable argument (ARG0), for the moment a guest should pass
+ * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
+ * tracing - which will ensure future compatability.
+ */
+#define HV_FAST_TTRACE_ENABLE           0x92
+
+/* ttrace_freeze()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_TTRACE_FREEZE
+ * ARG0:        freeze
+ * RET0:        status
+ * RET1:        previous freeze state
+ * ERRORS:      EINVAL          No trap trace buffer currently defined
+ *
+ * Freeze or unfreeze trap tracing, returning the previous freeze
+ * state in RET1.  A guest should pass a non-zero value to freeze and
+ * a zero value to unfreeze all tracing.  The returned previous state
+ * is 0 for not frozen and 1 for frozen.
+ */
+#define HV_FAST_TTRACE_FREEZE           0x93
+
+/* ttrace_addentry()
+ * TRAP:        HV_TTRACE_ADDENTRY_TRAP
+ * ARG0:        tag (16-bits)
+ * ARG1:        data word 0
+ * ARG2:        data word 1
+ * ARG3:        data word 2
+ * ARG4:        data word 3
+ * RET0:        status
+ * ERRORS:      EINVAL          No trap trace buffer currently defined
+ *
+ * Add an entry to the trap trace buffer.  Upon return only ARG0/RET0
+ * is modified - none of the other registers holding arguments are
+ * volatile across this hypervisor service.
+ */
+
+/* Core dump services.
+ *
+ * Since the hypervisor viraulizes and thus obscures a lot of the
+ * physical machine layout and state, traditional OS crash dumps can
+ * be difficult to diagnose especially when the problem is a
+ * configuration error of some sort.
+ *
+ * The dump services provide an opaque buffer into which the
+ * hypervisor can place it's internal state in order to assist in
+ * debugging such situations.  The contents are opaque and extremely
+ * platform and hypervisor implementation specific.  The guest, during
+ * a core dump, requests that the hypervisor update any information in
+ * the dump buffer in preparation to being dumped as part of the
+ * domain's memory image.
+ */
+
+/* dump_buf_update()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_DUMP_BUF_UPDATE
+ * ARG0:        real address
+ * ARG1:        size
+ * RET0:        status
+ * RET1:        required size of dump buffer
+ * ERRORS:      ENORADDR        Invalid real address
+ *              EBADALIGN       Real address is not aligned on a 64-byte
+ *                              boundary
+ *              EINVAL          Size is non-zero but less than minimum size
+ *                              required
+ *              ENOTSUPPORTED   Operation not supported on current logical
+ *                              domain
+ *
+ * Declare a domain dump buffer to the hypervisor.  The real address
+ * provided for the domain dump buffer must be 64-byte aligned.  The
+ * size specifies the size of the dump buffer and may be larger than
+ * the minimum size specified in the machine description.  The
+ * hypervisor will fill the dump buffer with opaque data.
+ *
+ * Note: A guest may elect to include dump buffer contents as part of a crash
+ *       dump to assist with debugging.  This function may be called any number
+ *       of times so that a guest may relocate a dump buffer, or create
+ *       "snapshots" of any dump-buffer information.  Each call to
+ *       dump_buf_update() atomically declares the new dump buffer to the
+ *       hypervisor.
+ *
+ * A specified size of 0 unconfigures the dump buffer.  If the real
+ * address is illegal or badly aligned, then any currently active dump
+ * buffer is disabled and an error is returned.
+ *
+ * In the event that the call fails with EINVAL, RET1 contains the
+ * minimum size requires by the hypervisor for a valid dump buffer.
+ */
+#define HV_FAST_DUMP_BUF_UPDATE         0x94
+
+/* dump_buf_info()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_DUMP_BUF_INFO
+ * RET0:        status
+ * RET1:        real address of current dump buffer
+ * RET2:        size of current dump buffer
+ * ERRORS:      No errors defined.
+ *
+ * Return the currently configures dump buffer description.  A
+ * returned size of 0 bytes indicates an undefined dump buffer.  In
+ * this case the return address in RET1 is undefined.
+ */
+#define HV_FAST_DUMP_BUF_INFO           0x95
+
+/* Device interrupt services.
+ *
+ * Device interrupts are allocated to system bus bridges by the hypervisor,
+ * and described to OBP in the machine description.  OBP then describes
+ * these interrupts to the OS via properties in the device tree.
+ *
+ * Terminology:
+ *
+ *      cpuid           Unique opaque value which represents a target cpu.
+ *
+ *      devhandle       Device handle.  It uniquely identifies a device, and
+ *                      consistes of the lower 28-bits of the hi-cell of the
+ *                      first entry of the device's "reg" property in the
+ *                      OBP device tree.
+ *
+ *      devino          Device interrupt number.  Specifies the relative
+ *                      interrupt number within the device.  The unique
+ *                      combination of devhandle and devino are used to
+ *                      identify a specific device interrupt.
+ *
+ *                      Note: The devino value is the same as the values in the
+ *                            "interrupts" property or "interrupt-map" property
+ *                            in the OBP device tree for that device.
+ *
+ *      sysino          System interrupt number.  A 64-bit unsigned interger
+ *                      representing a unique interrupt within a virtual
+ *                      machine.
+ *
+ *      intr_state      A flag representing the interrupt state for a given
+ *                      sysino.  The state values are defined below.
+ *
+ *      intr_enabled    A flag representing the 'enabled' state for a given
+ *                      sysino.  The enable values are defined below.
+ */
+
+#define HV_INTR_STATE_IDLE              0 /* Nothing pending */
+#define HV_INTR_STATE_RECEIVED          1 /* Interrupt received by hardware */
+#define HV_INTR_STATE_DELIVERED         2 /* Interrupt delivered to queue */
+
+#define HV_INTR_DISABLED                0 /* sysino not enabled */
+#define HV_INTR_ENABLED                 1 /* sysino enabled */
+
+/* intr_devino_to_sysino()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_INTR_DEVINO2SYSINO
+ * ARG0:        devhandle
+ * ARG1:        devino
+ * RET0:        status
+ * RET1:        sysino
+ * ERRORS:      EINVAL          Invalid devhandle/devino
+ *
+ * Converts a device specific interrupt number of the given
+ * devhandle/devino into a system specific ino (sysino).
+ */
+#define HV_FAST_INTR_DEVINO2SYSINO      0xa0
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle,
+                                            unsigned long devino);
+#endif
+
+/* intr_getenabled()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_INTR_GETENABLED
+ * ARG0:        sysino
+ * RET0:        status
+ * RET1:        intr_enabled (HV_INTR_{DISABLED,ENABLED})
+ * ERRORS:      EINVAL          Invalid sysino
+ *
+ * Returns interrupt enabled state in RET1 for the interrupt defined
+ * by the given sysino.
+ */
+#define HV_FAST_INTR_GETENABLED         0xa1
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_getenabled(unsigned long sysino);
+#endif
+
+/* intr_setenabled()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_INTR_SETENABLED
+ * ARG0:        sysino
+ * ARG1:        intr_enabled (HV_INTR_{DISABLED,ENABLED})
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid sysino or intr_enabled value
+ *
+ * Set the 'enabled' state of the interrupt sysino.
+ */
+#define HV_FAST_INTR_SETENABLED         0xa2
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled);
+#endif
+
+/* intr_getstate()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_INTR_GETSTATE
+ * ARG0:        sysino
+ * RET0:        status
+ * RET1:        intr_state (HV_INTR_STATE_*)
+ * ERRORS:      EINVAL          Invalid sysino
+ *
+ * Returns current state of the interrupt defined by the given sysino.
+ */
+#define HV_FAST_INTR_GETSTATE           0xa3
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_getstate(unsigned long sysino);
+#endif
+
+/* intr_setstate()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_INTR_SETSTATE
+ * ARG0:        sysino
+ * ARG1:        intr_state (HV_INTR_STATE_*)
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid sysino or intr_state value
+ *
+ * Sets the current state of the interrupt described by the given sysino
+ * value.
+ *
+ * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending
+ *       interrupt for sysino.
+ */
+#define HV_FAST_INTR_SETSTATE           0xa4
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state);
+#endif
+
+/* intr_gettarget()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_INTR_GETTARGET
+ * ARG0:        sysino
+ * RET0:        status
+ * RET1:        cpuid
+ * ERRORS:      EINVAL          Invalid sysino
+ *
+ * Returns CPU that is the current target of the interrupt defined by
+ * the given sysino.  The CPU value returned is undefined if the target
+ * has not been set via intr_settarget().
+ */
+#define HV_FAST_INTR_GETTARGET          0xa5
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_gettarget(unsigned long sysino);
+#endif
+
+/* intr_settarget()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_INTR_SETTARGET
+ * ARG0:        sysino
+ * ARG1:        cpuid
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid sysino
+ *              ENOCPU          Invalid cpuid
+ *
+ * Set the target CPU for the interrupt defined by the given sysino.
+ */
+#define HV_FAST_INTR_SETTARGET          0xa6
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid);
+#endif
+
+/* vintr_get_cookie()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_VINTR_GET_COOKIE
+ * ARG0:        device handle
+ * ARG1:        device ino
+ * RET0:        status
+ * RET1:        cookie
+ */
+#define HV_FAST_VINTR_GET_COOKIE        0xa7
+
+/* vintr_set_cookie()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_VINTR_SET_COOKIE
+ * ARG0:        device handle
+ * ARG1:        device ino
+ * ARG2:        cookie
+ * RET0:        status
+ */
+#define HV_FAST_VINTR_SET_COOKIE        0xa8
+
+/* vintr_get_valid()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_VINTR_GET_VALID
+ * ARG0:        device handle
+ * ARG1:        device ino
+ * RET0:        status
+ * RET1:        valid state
+ */
+#define HV_FAST_VINTR_GET_VALID         0xa9
+
+/* vintr_set_valid()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_VINTR_SET_VALID
+ * ARG0:        device handle
+ * ARG1:        device ino
+ * ARG2:        valid state
+ * RET0:        status
+ */
+#define HV_FAST_VINTR_SET_VALID         0xaa
+
+/* vintr_get_state()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_VINTR_GET_STATE
+ * ARG0:        device handle
+ * ARG1:        device ino
+ * RET0:        status
+ * RET1:        state
+ */
+#define HV_FAST_VINTR_GET_STATE         0xab
+
+/* vintr_set_state()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_VINTR_SET_STATE
+ * ARG0:        device handle
+ * ARG1:        device ino
+ * ARG2:        state
+ * RET0:        status
+ */
+#define HV_FAST_VINTR_SET_STATE         0xac
+
+/* vintr_get_target()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_VINTR_GET_TARGET
+ * ARG0:        device handle
+ * ARG1:        device ino
+ * RET0:        status
+ * RET1:        cpuid
+ */
+#define HV_FAST_VINTR_GET_TARGET        0xad
+
+/* vintr_set_target()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_VINTR_SET_TARGET
+ * ARG0:        device handle
+ * ARG1:        device ino
+ * ARG2:        cpuid
+ * RET0:        status
+ */
+#define HV_FAST_VINTR_SET_TARGET        0xae
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle,
+                                            unsigned long dev_ino,
+                                            unsigned long *cookie);
+extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle,
+                                            unsigned long dev_ino,
+                                            unsigned long cookie);
+extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle,
+                                           unsigned long dev_ino,
+                                           unsigned long *valid);
+extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle,
+                                           unsigned long dev_ino,
+                                           unsigned long valid);
+extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle,
+                                           unsigned long dev_ino,
+                                           unsigned long *state);
+extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle,
+                                           unsigned long dev_ino,
+                                           unsigned long state);
+extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle,
+                                            unsigned long dev_ino,
+                                            unsigned long *cpuid);
+extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
+                                            unsigned long dev_ino,
+                                            unsigned long cpuid);
+#endif
+
+/* PCI IO services.
+ *
+ * See the terminology descriptions in the device interrupt services
+ * section above as those apply here too.  Here are terminology
+ * definitions specific to these PCI IO services:
+ *
+ *      tsbnum          TSB number.  Indentifies which io-tsb is used.
+ *                      For this version of the specification, tsbnum
+ *                      must be zero.
+ *
+ *      tsbindex        TSB index.  Identifies which entry in the TSB
+ *                      is used.  The first entry is zero.
+ *
+ *      tsbid           A 64-bit aligned data structure which contains
+ *                      a tsbnum and a tsbindex.  Bits 63:32 contain the
+ *                      tsbnum and bits 31:00 contain the tsbindex.
+ *
+ *                      Use the HV_PCI_TSBID() macro to construct such
+ *                      values.
+ *
+ *      io_attributes   IO attributes for IOMMU mappings.  One of more
+ *                      of the attritbute bits are stores in a 64-bit
+ *                      value.  The values are defined below.
+ *
+ *      r_addr          64-bit real address
+ *
+ *      pci_device      PCI device address.  A PCI device address identifies
+ *                      a specific device on a specific PCI bus segment.
+ *                      A PCI device address ia a 32-bit unsigned integer
+ *                      with the following format:
+ *
+ *                              00000000.bbbbbbbb.dddddfff.00000000
+ *
+ *                      Use the HV_PCI_DEVICE_BUILD() macro to construct
+ *                      such values.
+ *
+ *      pci_config_offset
+ *                      PCI configureation space offset.  For conventional
+ *                      PCI a value between 0 and 255.  For extended
+ *                      configuration space, a value between 0 and 4095.
+ *
+ *                      Note: For PCI configuration space accesses, the offset
+ *                            must be aligned to the access size.
+ *
+ *      error_flag      A return value which specifies if the action succeeded
+ *                      or failed.  0 means no error, non-0 means some error
+ *                      occurred while performing the service.
+ *
+ *      io_sync_direction
+ *                      Direction definition for pci_dma_sync(), defined
+ *                      below in HV_PCI_SYNC_*.
+ *
+ *      io_page_list    A list of io_page_addresses, an io_page_address is
+ *                      a real address.
+ *
+ *      io_page_list_p  A pointer to an io_page_list.
+ *
+ *      "size based byte swap" - Some functions do size based byte swapping
+ *                               which allows sw to access pointers and
+ *                               counters in native form when the processor
+ *                               operates in a different endianness than the
+ *                               IO bus.  Size-based byte swapping converts a
+ *                               multi-byte field between big-endian and
+ *                               little-endian format.
+ */
+
+#define HV_PCI_MAP_ATTR_READ            0x01
+#define HV_PCI_MAP_ATTR_WRITE           0x02
+
+#define HV_PCI_DEVICE_BUILD(b,d,f)      \
+        ((((b) & 0xff) << 16) | \
+         (((d) & 0x1f) << 11) | \
+         (((f) & 0x07) <<  8))
+
+#define HV_PCI_TSBID(__tsb_num, __tsb_index) \
+        ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index)))
+
+#define HV_PCI_SYNC_FOR_DEVICE          0x01
+#define HV_PCI_SYNC_FOR_CPU             0x02
+
+/* pci_iommu_map()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_IOMMU_MAP
+ * ARG0:        devhandle
+ * ARG1:        tsbid
+ * ARG2:        #ttes
+ * ARG3:        io_attributes
+ * ARG4:        io_page_list_p
+ * RET0:        status
+ * RET1:        #ttes mapped
+ * ERRORS:      EINVAL          Invalid devhandle/tsbnum/tsbindex/io_attributes
+ *              EBADALIGN       Improperly aligned real address
+ *              ENORADDR        Invalid real address
+ *
+ * Create IOMMU mappings in the sun4v device defined by the given
+ * devhandle.  The mappings are created in the TSB defined by the
+ * tsbnum component of the given tsbid.  The first mapping is created
+ * in the TSB i ndex defined by the tsbindex component of the given tsbid.
+ * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex,
+ * the second at tsbnum, tsbindex + 1, etc.
+ *
+ * All mappings are created with the attributes defined by the io_attributes
+ * argument.  The page mapping addresses are described in the io_page_list
+ * defined by the given io_page_list_p, which is a pointer to the io_page_list.
+ * The first entry in the io_page_list is the address for the first iotte, the
+ * 2nd for the 2nd iotte, and so on.
+ *
+ * Each io_page_address in the io_page_list must be appropriately aligned.
+ * #ttes must be greater than zero.  For this version of the spec, the tsbnum
+ * component of the given tsbid must be zero.
+ *
+ * Returns the actual number of mappings creates, which may be less than
+ * or equal to the argument #ttes.  If the function returns a value which
+ * is less than the #ttes, the caller may continus to call the function with
+ * an updated tsbid, #ttes, io_page_list_p arguments until all pages are
+ * mapped.
+ *
+ * Note: This function does not imply an iotte cache flush.  The guest must
+ *       demap an entry before re-mapping it.
+ */
+#define HV_FAST_PCI_IOMMU_MAP           0xb0
+
+/* pci_iommu_demap()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_IOMMU_DEMAP
+ * ARG0:        devhandle
+ * ARG1:        tsbid
+ * ARG2:        #ttes
+ * RET0:        status
+ * RET1:        #ttes demapped
+ * ERRORS:      EINVAL          Invalid devhandle/tsbnum/tsbindex
+ *
+ * Demap and flush IOMMU mappings in the device defined by the given
+ * devhandle.  Demaps up to #ttes entries in the TSB defined by the tsbnum
+ * component of the given tsbid, starting at the TSB index defined by the
+ * tsbindex component of the given tsbid.
+ *
+ * For this version of the spec, the tsbnum of the given tsbid must be zero.
+ * #ttes must be greater than zero.
+ *
+ * Returns the actual number of ttes demapped, which may be less than or equal
+ * to the argument #ttes.  If #ttes demapped is less than #ttes, the caller
+ * may continue to call this function with updated tsbid and #ttes arguments
+ * until all pages are demapped.
+ *
+ * Note: Entries do not have to be mapped to be demapped.  A demap of an
+ *       unmapped page will flush the entry from the tte cache.
+ */
+#define HV_FAST_PCI_IOMMU_DEMAP         0xb1
+
+/* pci_iommu_getmap()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_IOMMU_GETMAP
+ * ARG0:        devhandle
+ * ARG1:        tsbid
+ * RET0:        status
+ * RET1:        io_attributes
+ * RET2:        real address
+ * ERRORS:      EINVAL          Invalid devhandle/tsbnum/tsbindex
+ *              ENOMAP          Mapping is not valid, no translation exists
+ *
+ * Read and return the mapping in the device described by the given devhandle
+ * and tsbid.  If successful, the io_attributes shall be returned in RET1
+ * and the page address of the mapping shall be returned in RET2.
+ *
+ * For this version of the spec, the tsbnum component of the given tsbid
+ * must be zero.
+ */
+#define HV_FAST_PCI_IOMMU_GETMAP        0xb2
+
+/* pci_iommu_getbypass()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_IOMMU_GETBYPASS
+ * ARG0:        devhandle
+ * ARG1:        real address
+ * ARG2:        io_attributes
+ * RET0:        status
+ * RET1:        io_addr
+ * ERRORS:      EINVAL          Invalid devhandle/io_attributes
+ *              ENORADDR        Invalid real address
+ *              ENOTSUPPORTED   Function not supported in this implementation.
+ *
+ * Create a "special" mapping in the device described by the given devhandle,
+ * for the given real address and attributes.  Return the IO address in RET1
+ * if successful.
+ */
+#define HV_FAST_PCI_IOMMU_GETBYPASS     0xb3
+
+/* pci_config_get()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_CONFIG_GET
+ * ARG0:        devhandle
+ * ARG1:        pci_device
+ * ARG2:        pci_config_offset
+ * ARG3:        size
+ * RET0:        status
+ * RET1:        error_flag
+ * RET2:        data
+ * ERRORS:      EINVAL          Invalid devhandle/pci_device/offset/size
+ *              EBADALIGN       pci_config_offset not size aligned
+ *              ENOACCESS       Access to this offset is not permitted
+ *
+ * Read PCI configuration space for the adapter described by the given
+ * devhandle.  Read size (1, 2, or 4) bytes of data from the given
+ * pci_device, at pci_config_offset from the beginning of the device's
+ * configuration space.  If there was no error, RET1 is set to zero and
+ * RET2 is set to the data read.  Insignificant bits in RET2 are not
+ * guarenteed to have any specific value and therefore must be ignored.
+ *
+ * The data returned in RET2 is size based byte swapped.
+ *
+ * If an error occurs during the read, set RET1 to a non-zero value.  The
+ * given pci_config_offset must be 'size' aligned.
+ */
+#define HV_FAST_PCI_CONFIG_GET          0xb4
+
+/* pci_config_put()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_CONFIG_PUT
+ * ARG0:        devhandle
+ * ARG1:        pci_device
+ * ARG2:        pci_config_offset
+ * ARG3:        size
+ * ARG4:        data
+ * RET0:        status
+ * RET1:        error_flag
+ * ERRORS:      EINVAL          Invalid devhandle/pci_device/offset/size
+ *              EBADALIGN       pci_config_offset not size aligned
+ *              ENOACCESS       Access to this offset is not permitted
+ *
+ * Write PCI configuration space for the adapter described by the given
+ * devhandle.  Write size (1, 2, or 4) bytes of data in a single operation,
+ * at pci_config_offset from the beginning of the device's configuration
+ * space.  The data argument contains the data to be written to configuration
+ * space.  Prior to writing, the data is size based byte swapped.
+ *
+ * If an error occurs during the write access, do not generate an error
+ * report, do set RET1 to a non-zero value.  Otherwise RET1 is zero.
+ * The given pci_config_offset must be 'size' aligned.
+ *
+ * This function is permitted to read from offset zero in the configuration
+ * space described by the given pci_device if necessary to ensure that the
+ * write access to config space completes.
+ */
+#define HV_FAST_PCI_CONFIG_PUT          0xb5
+
+/* pci_peek()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_PEEK
+ * ARG0:        devhandle
+ * ARG1:        real address
+ * ARG2:        size
+ * RET0:        status
+ * RET1:        error_flag
+ * RET2:        data
+ * ERRORS:      EINVAL          Invalid devhandle or size
+ *              EBADALIGN       Improperly aligned real address
+ *              ENORADDR        Bad real address
+ *              ENOACCESS       Guest access prohibited
+ *
+ * Attempt to read the IO address given by the given devhandle, real address,
+ * and size.  Size must be 1, 2, 4, or 8.  The read is performed as a single
+ * access operation using the given size.  If an error occurs when reading
+ * from the given location, do not generate an error report, but return a
+ * non-zero value in RET1.  If the read was successful, return zero in RET1
+ * and return the actual data read in RET2.  The data returned is size based
+ * byte swapped.
+ *
+ * Non-significant bits in RET2 are not guarenteed to have any specific value
+ * and therefore must be ignored.  If RET1 is returned as non-zero, the data
+ * value is not guarenteed to have any specific value and should be ignored.
+ *
+ * The caller must have permission to read from the given devhandle, real
+ * address, which must be an IO address.  The argument real address must be a
+ * size aligned address.
+ *
+ * The hypervisor implementation of this function must block access to any
+ * IO address that the guest does not have explicit permission to access.
+ */
+#define HV_FAST_PCI_PEEK                0xb6
+
+/* pci_poke()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_POKE
+ * ARG0:        devhandle
+ * ARG1:        real address
+ * ARG2:        size
+ * ARG3:        data
+ * ARG4:        pci_device
+ * RET0:        status
+ * RET1:        error_flag
+ * ERRORS:      EINVAL          Invalid devhandle, size, or pci_device
+ *              EBADALIGN       Improperly aligned real address
+ *              ENORADDR        Bad real address
+ *              ENOACCESS       Guest access prohibited
+ *              ENOTSUPPORTED   Function is not supported by implementation
+ *
+ * Attempt to write data to the IO address given by the given devhandle,
+ * real address, and size.  Size must be 1, 2, 4, or 8.  The write is
+ * performed as a single access operation using the given size. Prior to
+ * writing the data is size based swapped.
+ *
+ * If an error occurs when writing to the given location, do not generate an
+ * error report, but return a non-zero value in RET1.  If the write was
+ * successful, return zero in RET1.
+ *
+ * pci_device describes the configuration address of the device being
+ * written to.  The implementation may safely read from offset 0 with
+ * the configuration space of the device described by devhandle and
+ * pci_device in order to guarantee that the write portion of the operation
+ * completes
+ *
+ * Any error that occurs due to the read shall be reported using the normal
+ * error reporting mechanisms .. the read error is not suppressed.
+ *
+ * The caller must have permission to write to the given devhandle, real
+ * address, which must be an IO address.  The argument real address must be a
+ * size aligned address.  The caller must have permission to read from
+ * the given devhandle, pci_device cofiguration space offset 0.
+ *
+ * The hypervisor implementation of this function must block access to any
+ * IO address that the guest does not have explicit permission to access.
+ */
+#define HV_FAST_PCI_POKE                0xb7
+
+/* pci_dma_sync()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_DMA_SYNC
+ * ARG0:        devhandle
+ * ARG1:        real address
+ * ARG2:        size
+ * ARG3:        io_sync_direction
+ * RET0:        status
+ * RET1:        #synced
+ * ERRORS:      EINVAL          Invalid devhandle or io_sync_direction
+ *              ENORADDR        Bad real address
+ *
+ * Synchronize a memory region described by the given real address and size,
+ * for the device defined by the given devhandle using the direction(s)
+ * defined by the given io_sync_direction.  The argument size is the size of
+ * the memory region in bytes.
+ *
+ * Return the actual number of bytes synchronized in the return value #synced,
+ * which may be less than or equal to the argument size.  If the return
+ * value #synced is less than size, the caller must continue to call this
+ * function with updated real address and size arguments until the entire
+ * memory region is synchronized.
+ */
+#define HV_FAST_PCI_DMA_SYNC            0xb8
+
+/* PCI MSI services.  */
+
+#define HV_MSITYPE_MSI32                0x00
+#define HV_MSITYPE_MSI64                0x01
+
+#define HV_MSIQSTATE_IDLE               0x00
+#define HV_MSIQSTATE_ERROR              0x01
+
+#define HV_MSIQ_INVALID                 0x00
+#define HV_MSIQ_VALID                   0x01
+
+#define HV_MSISTATE_IDLE                0x00
+#define HV_MSISTATE_DELIVERED           0x01
+
+#define HV_MSIVALID_INVALID             0x00
+#define HV_MSIVALID_VALID               0x01
+
+#define HV_PCIE_MSGTYPE_PME_MSG         0x18
+#define HV_PCIE_MSGTYPE_PME_ACK_MSG     0x1b
+#define HV_PCIE_MSGTYPE_CORR_MSG        0x30
+#define HV_PCIE_MSGTYPE_NONFATAL_MSG    0x31
+#define HV_PCIE_MSGTYPE_FATAL_MSG       0x33
+
+#define HV_MSG_INVALID                  0x00
+#define HV_MSG_VALID                    0x01
+
+/* pci_msiq_conf()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSIQ_CONF
+ * ARG0:        devhandle
+ * ARG1:        msiqid
+ * ARG2:        real address
+ * ARG3:        number of entries
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid devhandle, msiqid or nentries
+ *              EBADALIGN       Improperly aligned real address
+ *              ENORADDR        Bad real address
+ *
+ * Configure the MSI queue given by the devhandle and msiqid arguments,
+ * and to be placed at the given real address and be of the given
+ * number of entries.  The real address must be aligned exactly to match
+ * the queue size.  Each queue entry is 64-bytes long, so f.e. a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.  The MSI-EQ
+ * Head and Tail are initialized so that the MSI-EQ is 'empty'.
+ *
+ * Implementation Note: Certain implementations have fixed sized queues.  In
+ *                      that case, number of entries must contain the correct
+ *                      value.
+ */
+#define HV_FAST_PCI_MSIQ_CONF           0xc0
+
+/* pci_msiq_info()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSIQ_INFO
+ * ARG0:        devhandle
+ * ARG1:        msiqid
+ * RET0:        status
+ * RET1:        real address
+ * RET2:        number of entries
+ * ERRORS:      EINVAL          Invalid devhandle or msiqid
+ *
+ * Return the configuration information for the MSI queue described
+ * by the given devhandle and msiqid.  The base address of the queue
+ * is returned in ARG1 and the number of entries is returned in ARG2.
+ * If the queue is unconfigured, the real address is undefined and the
+ * number of entries will be returned as zero.
+ */
+#define HV_FAST_PCI_MSIQ_INFO           0xc1
+
+/* pci_msiq_getvalid()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSIQ_GETVALID
+ * ARG0:        devhandle
+ * ARG1:        msiqid
+ * RET0:        status
+ * RET1:        msiqvalid       (HV_MSIQ_VALID or HV_MSIQ_INVALID)
+ * ERRORS:      EINVAL          Invalid devhandle or msiqid
+ *
+ * Get the valid state of the MSI-EQ described by the given devhandle and
+ * msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETVALID       0xc2
+
+/* pci_msiq_setvalid()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSIQ_SETVALID
+ * ARG0:        devhandle
+ * ARG1:        msiqid
+ * ARG2:        msiqvalid       (HV_MSIQ_VALID or HV_MSIQ_INVALID)
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid devhandle or msiqid or msiqvalid
+ *                              value or MSI EQ is uninitialized
+ *
+ * Set the valid state of the MSI-EQ described by the given devhandle and
+ * msiqid to the given msiqvalid.
+ */
+#define HV_FAST_PCI_MSIQ_SETVALID       0xc3
+
+/* pci_msiq_getstate()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSIQ_GETSTATE
+ * ARG0:        devhandle
+ * ARG1:        msiqid
+ * RET0:        status
+ * RET1:        msiqstate       (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
+ * ERRORS:      EINVAL          Invalid devhandle or msiqid
+ *
+ * Get the state of the MSI-EQ described by the given devhandle and
+ * msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETSTATE       0xc4
+
+/* pci_msiq_getvalid()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSIQ_GETVALID
+ * ARG0:        devhandle
+ * ARG1:        msiqid
+ * ARG2:        msiqstate       (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid devhandle or msiqid or msiqstate
+ *                              value or MSI EQ is uninitialized
+ *
+ * Set the state of the MSI-EQ described by the given devhandle and
+ * msiqid to the given msiqvalid.
+ */
+#define HV_FAST_PCI_MSIQ_SETSTATE       0xc5
+
+/* pci_msiq_gethead()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSIQ_GETHEAD
+ * ARG0:        devhandle
+ * ARG1:        msiqid
+ * RET0:        status
+ * RET1:        msiqhead
+ * ERRORS:      EINVAL          Invalid devhandle or msiqid
+ *
+ * Get the current MSI EQ queue head for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETHEAD        0xc6
+
+/* pci_msiq_sethead()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSIQ_SETHEAD
+ * ARG0:        devhandle
+ * ARG1:        msiqid
+ * ARG2:        msiqhead
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid devhandle or msiqid or msiqhead,
+ *                              or MSI EQ is uninitialized
+ *
+ * Set the current MSI EQ queue head for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_SETHEAD        0xc7
+
+/* pci_msiq_gettail()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSIQ_GETTAIL
+ * ARG0:        devhandle
+ * ARG1:        msiqid
+ * RET0:        status
+ * RET1:        msiqtail
+ * ERRORS:      EINVAL          Invalid devhandle or msiqid
+ *
+ * Get the current MSI EQ queue tail for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETTAIL        0xc8
+
+/* pci_msi_getvalid()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSI_GETVALID
+ * ARG0:        devhandle
+ * ARG1:        msinum
+ * RET0:        status
+ * RET1:        msivalidstate
+ * ERRORS:      EINVAL          Invalid devhandle or msinum
+ *
+ * Get the current valid/enabled state for the MSI defined by the
+ * given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_GETVALID        0xc9
+
+/* pci_msi_setvalid()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSI_SETVALID
+ * ARG0:        devhandle
+ * ARG1:        msinum
+ * ARG2:        msivalidstate
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid devhandle or msinum or msivalidstate
+ *
+ * Set the current valid/enabled state for the MSI defined by the
+ * given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_SETVALID        0xca
+
+/* pci_msi_getmsiq()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSI_GETMSIQ
+ * ARG0:        devhandle
+ * ARG1:        msinum
+ * RET0:        status
+ * RET1:        msiqid
+ * ERRORS:      EINVAL          Invalid devhandle or msinum or MSI is unbound
+ *
+ * Get the MSI EQ that the MSI defined by the given devhandle and
+ * msinum is bound to.
+ */
+#define HV_FAST_PCI_MSI_GETMSIQ         0xcb
+
+/* pci_msi_setmsiq()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSI_SETMSIQ
+ * ARG0:        devhandle
+ * ARG1:        msinum
+ * ARG2:        msitype
+ * ARG3:        msiqid
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid devhandle or msinum or msiqid
+ *
+ * Set the MSI EQ that the MSI defined by the given devhandle and
+ * msinum is bound to.
+ */
+#define HV_FAST_PCI_MSI_SETMSIQ         0xcc
+
+/* pci_msi_getstate()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSI_GETSTATE
+ * ARG0:        devhandle
+ * ARG1:        msinum
+ * RET0:        status
+ * RET1:        msistate
+ * ERRORS:      EINVAL          Invalid devhandle or msinum
+ *
+ * Get the state of the MSI defined by the given devhandle and msinum.
+ * If not initialized, return HV_MSISTATE_IDLE.
+ */
+#define HV_FAST_PCI_MSI_GETSTATE        0xcd
+
+/* pci_msi_setstate()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSI_SETSTATE
+ * ARG0:        devhandle
+ * ARG1:        msinum
+ * ARG2:        msistate
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid devhandle or msinum or msistate
+ *
+ * Set the state of the MSI defined by the given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_SETSTATE        0xce
+
+/* pci_msg_getmsiq()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSG_GETMSIQ
+ * ARG0:        devhandle
+ * ARG1:        msgtype
+ * RET0:        status
+ * RET1:        msiqid
+ * ERRORS:      EINVAL          Invalid devhandle or msgtype
+ *
+ * Get the MSI EQ of the MSG defined by the given devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_GETMSIQ         0xd0
+
+/* pci_msg_setmsiq()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSG_SETMSIQ
+ * ARG0:        devhandle
+ * ARG1:        msgtype
+ * ARG2:        msiqid
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid devhandle, msgtype, or msiqid
+ *
+ * Set the MSI EQ of the MSG defined by the given devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_SETMSIQ         0xd1
+
+/* pci_msg_getvalid()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSG_GETVALID
+ * ARG0:        devhandle
+ * ARG1:        msgtype
+ * RET0:        status
+ * RET1:        msgvalidstate
+ * ERRORS:      EINVAL          Invalid devhandle or msgtype
+ *
+ * Get the valid/enabled state of the MSG defined by the given
+ * devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_GETVALID        0xd2
+
+/* pci_msg_setvalid()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_PCI_MSG_SETVALID
+ * ARG0:        devhandle
+ * ARG1:        msgtype
+ * ARG2:        msgvalidstate
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid devhandle or msgtype or msgvalidstate
+ *
+ * Set the valid/enabled state of the MSG defined by the given
+ * devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_SETVALID        0xd3
+
+/* Logical Domain Channel services.  */
+
+#define LDC_CHANNEL_DOWN                0
+#define LDC_CHANNEL_UP                  1
+#define LDC_CHANNEL_RESETTING           2
+
+/* ldc_tx_qconf()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_TX_QCONF
+ * ARG0:        channel ID
+ * ARG1:        real address base of queue
+ * ARG2:        num entries in queue
+ * RET0:        status
+ *
+ * Configure transmit queue for the LDC endpoint specified by the
+ * given channel ID, to be placed at the given real address, and
+ * be of the given num entries.  Num entries must be a power of two.
+ * The real address base of the queue must be aligned on the queue
+ * size.  Each queue entry is 64-bytes, so for example, a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.
+ *
+ * Upon configuration of a valid transmit queue the head and tail
+ * pointers are set to a hypervisor specific identical value indicating
+ * that the queue initially is empty.
+ *
+ * The endpoint's transmit queue is un-configured if num entries is zero.
+ *
+ * The maximum number of entries for each queue for a specific cpu may be
+ * determined from the machine description.  A transmit queue may be
+ * specified even in the event that the LDC is down (peer endpoint has no
+ * receive queue specified).  Transmission will begin as soon as the peer
+ * endpoint defines a receive queue.
+ *
+ * It is recommended that a guest wait for a transmit queue to empty prior
+ * to reconfiguring it, or un-configuring it.  Re or un-configuring of a
+ * non-empty transmit queue behaves exactly as defined above, however it
+ * is undefined as to how many of the pending entries in the original queue
+ * will be delivered prior to the re-configuration taking effect.
+ * Furthermore, as the queue configuration causes a reset of the head and
+ * tail pointers there is no way for a guest to determine how many entries
+ * have been sent after the configuration operation.
+ */
+#define HV_FAST_LDC_TX_QCONF            0xe0
+
+/* ldc_tx_qinfo()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_TX_QINFO
+ * ARG0:        channel ID
+ * RET0:        status
+ * RET1:        real address base of queue
+ * RET2:        num entries in queue
+ *
+ * Return the configuration info for the transmit queue of LDC endpoint
+ * defined by the given channel ID.  The real address is the currently
+ * defined real address base of the defined queue, and num entries is the
+ * size of the queue in terms of number of entries.
+ *
+ * If the specified channel ID is a valid endpoint number, but no transmit
+ * queue has been defined this service will return success, but with num
+ * entries set to zero and the real address will have an undefined value.
+ */
+#define HV_FAST_LDC_TX_QINFO            0xe1
+
+/* ldc_tx_get_state()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_TX_GET_STATE
+ * ARG0:        channel ID
+ * RET0:        status
+ * RET1:        head offset
+ * RET2:        tail offset
+ * RET3:        channel state
+ *
+ * Return the transmit state, and the head and tail queue pointers, for
+ * the transmit queue of the LDC endpoint defined by the given channel ID.
+ * The head and tail values are the byte offset of the head and tail
+ * positions of the transmit queue for the specified endpoint.
+ */
+#define HV_FAST_LDC_TX_GET_STATE        0xe2
+
+/* ldc_tx_set_qtail()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_TX_SET_QTAIL
+ * ARG0:        channel ID
+ * ARG1:        tail offset
+ * RET0:        status
+ *
+ * Update the tail pointer for the transmit queue associated with the LDC
+ * endpoint defined by the given channel ID.  The tail offset specified
+ * must be aligned on a 64 byte boundary, and calculated so as to increase
+ * the number of pending entries on the transmit queue.  Any attempt to
+ * decrease the number of pending transmit queue entires is considered
+ * an invalid tail offset and will result in an EINVAL error.
+ *
+ * Since the tail of the transmit queue may not be moved backwards, the
+ * transmit queue may be flushed by configuring a new transmit queue,
+ * whereupon the hypervisor will configure the initial transmit head and
+ * tail pointers to be equal.
+ */
+#define HV_FAST_LDC_TX_SET_QTAIL        0xe3
+
+/* ldc_rx_qconf()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_RX_QCONF
+ * ARG0:        channel ID
+ * ARG1:        real address base of queue
+ * ARG2:        num entries in queue
+ * RET0:        status
+ *
+ * Configure receive queue for the LDC endpoint specified by the
+ * given channel ID, to be placed at the given real address, and
+ * be of the given num entries.  Num entries must be a power of two.
+ * The real address base of the queue must be aligned on the queue
+ * size.  Each queue entry is 64-bytes, so for example, a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.
+ *
+ * The endpoint's transmit queue is un-configured if num entries is zero.
+ *
+ * If a valid receive queue is specified for a local endpoint the LDC is
+ * in the up state for the purpose of transmission to this endpoint.
+ *
+ * The maximum number of entries for each queue for a specific cpu may be
+ * determined from the machine description.
+ *
+ * As receive queue configuration causes a reset of the queue's head and
+ * tail pointers there is no way for a gues to determine how many entries
+ * have been received between a preceeding ldc_get_rx_state() API call
+ * and the completion of the configuration operation.  It should be noted
+ * that datagram delivery is not guarenteed via domain channels anyway,
+ * and therefore any higher protocol should be resilient to datagram
+ * loss if necessary.  However, to overcome this specific race potential
+ * it is recommended, for example, that a higher level protocol be employed
+ * to ensure either retransmission, or ensure that no datagrams are pending
+ * on the peer endpoint's transmit queue prior to the configuration process.
+ */
+#define HV_FAST_LDC_RX_QCONF            0xe4
+
+/* ldc_rx_qinfo()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_RX_QINFO
+ * ARG0:        channel ID
+ * RET0:        status
+ * RET1:        real address base of queue
+ * RET2:        num entries in queue
+ *
+ * Return the configuration info for the receive queue of LDC endpoint
+ * defined by the given channel ID.  The real address is the currently
+ * defined real address base of the defined queue, and num entries is the
+ * size of the queue in terms of number of entries.
+ *
+ * If the specified channel ID is a valid endpoint number, but no receive
+ * queue has been defined this service will return success, but with num
+ * entries set to zero and the real address will have an undefined value.
+ */
+#define HV_FAST_LDC_RX_QINFO            0xe5
+
+/* ldc_rx_get_state()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_RX_GET_STATE
+ * ARG0:        channel ID
+ * RET0:        status
+ * RET1:        head offset
+ * RET2:        tail offset
+ * RET3:        channel state
+ *
+ * Return the receive state, and the head and tail queue pointers, for
+ * the receive queue of the LDC endpoint defined by the given channel ID.
+ * The head and tail values are the byte offset of the head and tail
+ * positions of the receive queue for the specified endpoint.
+ */
+#define HV_FAST_LDC_RX_GET_STATE        0xe6
+
+/* ldc_rx_set_qhead()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_RX_SET_QHEAD
+ * ARG0:        channel ID
+ * ARG1:        head offset
+ * RET0:        status
+ *
+ * Update the head pointer for the receive queue associated with the LDC
+ * endpoint defined by the given channel ID.  The head offset specified
+ * must be aligned on a 64 byte boundary, and calculated so as to decrease
+ * the number of pending entries on the receive queue.  Any attempt to
+ * increase the number of pending receive queue entires is considered
+ * an invalid head offset and will result in an EINVAL error.
+ *
+ * The receive queue may be flushed by setting the head offset equal
+ * to the current tail offset.
+ */
+#define HV_FAST_LDC_RX_SET_QHEAD        0xe7
+
+/* LDC Map Table Entry.  Each slot is defined by a translation table
+ * entry, as specified by the LDC_MTE_* bits below, and a 64-bit
+ * hypervisor invalidation cookie.
+ */
+#define LDC_MTE_PADDR   0x0fffffffffffe000 /* pa[55:13]          */
+#define LDC_MTE_COPY_W  0x0000000000000400 /* copy write access  */
+#define LDC_MTE_COPY_R  0x0000000000000200 /* copy read access   */
+#define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */
+#define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access  */
+#define LDC_MTE_EXEC    0x0000000000000040 /* execute            */
+#define LDC_MTE_WRITE   0x0000000000000020 /* read               */
+#define LDC_MTE_READ    0x0000000000000010 /* write              */
+#define LDC_MTE_SZALL   0x000000000000000f /* page size bits     */
+#define LDC_MTE_SZ16GB  0x0000000000000007 /* 16GB page          */
+#define LDC_MTE_SZ2GB   0x0000000000000006 /* 2GB page           */
+#define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page         */
+#define LDC_MTE_SZ32MB  0x0000000000000004 /* 32MB page          */
+#define LDC_MTE_SZ4MB   0x0000000000000003 /* 4MB page           */
+#define LDC_MTE_SZ512K  0x0000000000000002 /* 512K page          */
+#define LDC_MTE_SZ64K   0x0000000000000001 /* 64K page           */
+#define LDC_MTE_SZ8K    0x0000000000000000 /* 8K page            */
+
+#ifndef __ASSEMBLY__
+struct ldc_mtable_entry {
+        unsigned long   mte;
+        unsigned long   cookie;
+};
+#endif
+
+/* ldc_set_map_table()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_SET_MAP_TABLE
+ * ARG0:        channel ID
+ * ARG1:        table real address
+ * ARG2:        num entries
+ * RET0:        status
+ *
+ * Register the MTE table at the given table real address, with the
+ * specified num entries, for the LDC indicated by the given channel
+ * ID.
+ */
+#define HV_FAST_LDC_SET_MAP_TABLE       0xea
+
+/* ldc_get_map_table()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_GET_MAP_TABLE
+ * ARG0:        channel ID
+ * RET0:        status
+ * RET1:        table real address
+ * RET2:        num entries
+ *
+ * Return the configuration of the current mapping table registered
+ * for the given channel ID.
+ */
+#define HV_FAST_LDC_GET_MAP_TABLE       0xeb
+
+#define LDC_COPY_IN     0
+#define LDC_COPY_OUT    1
+
+/* ldc_copy()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_COPY
+ * ARG0:        channel ID
+ * ARG1:        LDC_COPY_* direction code
+ * ARG2:        target real address
+ * ARG3:        local real address
+ * ARG4:        length in bytes
+ * RET0:        status
+ * RET1:        actual length in bytes
+ */
+#define HV_FAST_LDC_COPY                0xec
+
+#define LDC_MEM_READ    1
+#define LDC_MEM_WRITE   2
+#define LDC_MEM_EXEC    4
+
+/* ldc_mapin()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_MAPIN
+ * ARG0:        channel ID
+ * ARG1:        cookie
+ * RET0:        status
+ * RET1:        real address
+ * RET2:        LDC_MEM_* permissions
+ */
+#define HV_FAST_LDC_MAPIN               0xed
+
+/* ldc_unmap()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_UNMAP
+ * ARG0:        real address
+ * RET0:        status
+ */
+#define HV_FAST_LDC_UNMAP               0xee
+
+/* ldc_revoke()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_LDC_REVOKE
+ * ARG0:        channel ID
+ * ARG1:        cookie
+ * ARG2:        ldc_mtable_entry cookie
+ * RET0:        status
+ */
+#define HV_FAST_LDC_REVOKE              0xef
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel,
+                                        unsigned long ra,
+                                        unsigned long num_entries);
+extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel,
+                                        unsigned long *ra,
+                                        unsigned long *num_entries);
+extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel,
+                                            unsigned long *head_off,
+                                            unsigned long *tail_off,
+                                            unsigned long *chan_state);
+extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel,
+                                            unsigned long tail_off);
+extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel,
+                                        unsigned long ra,
+                                        unsigned long num_entries);
+extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel,
+                                        unsigned long *ra,
+                                        unsigned long *num_entries);
+extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel,
+                                            unsigned long *head_off,
+                                            unsigned long *tail_off,
+                                            unsigned long *chan_state);
+extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel,
+                                            unsigned long head_off);
+extern unsigned long sun4v_ldc_set_map_table(unsigned long channel,
+                                             unsigned long ra,
+                                             unsigned long num_entries);
+extern unsigned long sun4v_ldc_get_map_table(unsigned long channel,
+                                             unsigned long *ra,
+                                             unsigned long *num_entries);
+extern unsigned long sun4v_ldc_copy(unsigned long channel,
+                                    unsigned long dir_code,
+                                    unsigned long tgt_raddr,
+                                    unsigned long lcl_raddr,
+                                    unsigned long len,
+                                    unsigned long *actual_len);
+extern unsigned long sun4v_ldc_mapin(unsigned long channel,
+                                     unsigned long cookie,
+                                     unsigned long *ra,
+                                     unsigned long *perm);
+extern unsigned long sun4v_ldc_unmap(unsigned long ra);
+extern unsigned long sun4v_ldc_revoke(unsigned long channel,
+                                      unsigned long cookie,
+                                      unsigned long mte_cookie);
+#endif
+
+/* Performance counter services.  */
+
+#define HV_PERF_JBUS_PERF_CTRL_REG      0x00
+#define HV_PERF_JBUS_PERF_CNT_REG       0x01
+#define HV_PERF_DRAM_PERF_CTRL_REG_0    0x02
+#define HV_PERF_DRAM_PERF_CNT_REG_0     0x03
+#define HV_PERF_DRAM_PERF_CTRL_REG_1    0x04
+#define HV_PERF_DRAM_PERF_CNT_REG_1     0x05
+#define HV_PERF_DRAM_PERF_CTRL_REG_2    0x06
+#define HV_PERF_DRAM_PERF_CNT_REG_2     0x07
+#define HV_PERF_DRAM_PERF_CTRL_REG_3    0x08
+#define HV_PERF_DRAM_PERF_CNT_REG_3     0x09
+
+/* get_perfreg()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_GET_PERFREG
+ * ARG0:        performance reg number
+ * RET0:        status
+ * RET1:        performance reg value
+ * ERRORS:      EINVAL          Invalid performance register number
+ *              ENOACCESS       No access allowed to performance counters
+ *
+ * Read the value of the given DRAM/JBUS performance counter/control register.
+ */
+#define HV_FAST_GET_PERFREG             0x100
+
+/* set_perfreg()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_SET_PERFREG
+ * ARG0:        performance reg number
+ * ARG1:        performance reg value
+ * RET0:        status
+ * ERRORS:      EINVAL          Invalid performance register number
+ *              ENOACCESS       No access allowed to performance counters
+ *
+ * Write the given performance reg value to the given DRAM/JBUS
+ * performance counter/control register.
+ */
+#define HV_FAST_SET_PERFREG             0x101
+
+/* MMU statistics services.
+ *
+ * The hypervisor maintains MMU statistics and privileged code provides
+ * a buffer where these statistics can be collected.  It is continually
+ * updated once configured.  The layout is as follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_mmu_statistics {
+        unsigned long immu_tsb_hits_ctx0_8k_tte;
+        unsigned long immu_tsb_ticks_ctx0_8k_tte;
+        unsigned long immu_tsb_hits_ctx0_64k_tte;
+        unsigned long immu_tsb_ticks_ctx0_64k_tte;
+        unsigned long __reserved1[2];
+        unsigned long immu_tsb_hits_ctx0_4mb_tte;
+        unsigned long immu_tsb_ticks_ctx0_4mb_tte;
+        unsigned long __reserved2[2];
+        unsigned long immu_tsb_hits_ctx0_256mb_tte;
+        unsigned long immu_tsb_ticks_ctx0_256mb_tte;
+        unsigned long __reserved3[4];
+        unsigned long immu_tsb_hits_ctxnon0_8k_tte;
+        unsigned long immu_tsb_ticks_ctxnon0_8k_tte;
+        unsigned long immu_tsb_hits_ctxnon0_64k_tte;
+        unsigned long immu_tsb_ticks_ctxnon0_64k_tte;
+        unsigned long __reserved4[2];
+        unsigned long immu_tsb_hits_ctxnon0_4mb_tte;
+        unsigned long immu_tsb_ticks_ctxnon0_4mb_tte;
+        unsigned long __reserved5[2];
+        unsigned long immu_tsb_hits_ctxnon0_256mb_tte;
+        unsigned long immu_tsb_ticks_ctxnon0_256mb_tte;
+        unsigned long __reserved6[4];
+        unsigned long dmmu_tsb_hits_ctx0_8k_tte;
+        unsigned long dmmu_tsb_ticks_ctx0_8k_tte;
+        unsigned long dmmu_tsb_hits_ctx0_64k_tte;
+        unsigned long dmmu_tsb_ticks_ctx0_64k_tte;
+        unsigned long __reserved7[2];
+        unsigned long dmmu_tsb_hits_ctx0_4mb_tte;
+        unsigned long dmmu_tsb_ticks_ctx0_4mb_tte;
+        unsigned long __reserved8[2];
+        unsigned long dmmu_tsb_hits_ctx0_256mb_tte;
+        unsigned long dmmu_tsb_ticks_ctx0_256mb_tte;
+        unsigned long __reserved9[4];
+        unsigned long dmmu_tsb_hits_ctxnon0_8k_tte;
+        unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte;
+        unsigned long dmmu_tsb_hits_ctxnon0_64k_tte;
+        unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte;
+        unsigned long __reserved10[2];
+        unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte;
+        unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte;
+        unsigned long __reserved11[2];
+        unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte;
+        unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte;
+        unsigned long __reserved12[4];
+};
+#endif
+
+/* mmustat_conf()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMUSTAT_CONF
+ * ARG0:        real address
+ * RET0:        status
+ * RET1:        real address
+ * ERRORS:      ENORADDR        Invalid real address
+ *              EBADALIGN       Real address not aligned on 64-byte boundary
+ *              EBADTRAP        API not supported on this processor
+ *
+ * Enable MMU statistic gathering using the buffer at the given real
+ * address on the current virtual CPU.  The new buffer real address
+ * is given in ARG1, and the previously specified buffer real address
+ * is returned in RET1, or is returned as zero for the first invocation.
+ *
+ * If the passed in real address argument is zero, this will disable
+ * MMU statistic collection on the current virtual CPU.  If an error is
+ * returned then no statistics are collected.
+ *
+ * The buffer contents should be initialized to all zeros before being
+ * given to the hypervisor or else the statistics will be meaningless.
+ */
+#define HV_FAST_MMUSTAT_CONF            0x102
+
+/* mmustat_info()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_MMUSTAT_INFO
+ * RET0:        status
+ * RET1:        real address
+ * ERRORS:      EBADTRAP        API not supported on this processor
+ *
+ * Return the current state and real address of the currently configured
+ * MMU statistics buffer on the current virtual CPU.
+ */
+#define HV_FAST_MMUSTAT_INFO            0x103
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra);
+extern unsigned long sun4v_mmustat_info(unsigned long *ra);
+#endif
+
+/* NCS crypto services  */
+
+/* ncs_request() sub-function numbers */
+#define HV_NCS_QCONF                    0x01
+#define HV_NCS_QTAIL_UPDATE             0x02
+
+#ifndef __ASSEMBLY__
+struct hv_ncs_queue_entry {
+        /* MAU Control Register */
+        unsigned long   mau_control;
+#define MAU_CONTROL_INV_PARITY  0x0000000000002000
+#define MAU_CONTROL_STRAND      0x0000000000001800
+#define MAU_CONTROL_BUSY        0x0000000000000400
+#define MAU_CONTROL_INT         0x0000000000000200
+#define MAU_CONTROL_OP          0x00000000000001c0
+#define MAU_CONTROL_OP_SHIFT    6
+#define MAU_OP_LOAD_MA_MEMORY   0x0
+#define MAU_OP_STORE_MA_MEMORY  0x1
+#define MAU_OP_MODULAR_MULT     0x2
+#define MAU_OP_MODULAR_REDUCE   0x3
+#define MAU_OP_MODULAR_EXP_LOOP 0x4
+#define MAU_CONTROL_LEN         0x000000000000003f
+#define MAU_CONTROL_LEN_SHIFT   0
+
+        /* Real address of bytes to load or store bytes
+         * into/out-of the MAU.
+         */
+        unsigned long   mau_mpa;
+
+        /* Modular Arithmetic MA Offset Register.  */
+        unsigned long   mau_ma;
+
+        /* Modular Arithmetic N Prime Register.  */
+        unsigned long   mau_np;
+};
+
+struct hv_ncs_qconf_arg {
+        unsigned long   mid;      /* MAU ID, 1 per core on Niagara */
+        unsigned long   base;     /* Real address base of queue */
+        unsigned long   end;      /* Real address end of queue */
+        unsigned long   num_ents; /* Number of entries in queue */
+};
+
+struct hv_ncs_qtail_update_arg {
+        unsigned long   mid;      /* MAU ID, 1 per core on Niagara */
+        unsigned long   tail;     /* New tail index to use */
+        unsigned long   syncflag; /* only SYNCFLAG_SYNC is implemented */
+#define HV_NCS_SYNCFLAG_SYNC    0x00
+#define HV_NCS_SYNCFLAG_ASYNC   0x01
+};
+#endif
+
+/* ncs_request()
+ * TRAP:        HV_FAST_TRAP
+ * FUNCTION:    HV_FAST_NCS_REQUEST
+ * ARG0:        NCS sub-function
+ * ARG1:        sub-function argument real address
+ * ARG2:        size in bytes of sub-function argument
+ * RET0:        status
+ *
+ * The MAU chip of the Niagara processor is not directly accessible
+ * to privileged code, instead it is programmed indirectly via this
+ * hypervisor API.
+ *
+ * The interfaces defines a queue of MAU operations to perform.
+ * Privileged code registers a queue with the hypervisor by invoking
+ * this HVAPI with the HV_NCS_QCONF sub-function, which defines the
+ * base, end, and number of entries of the queue.  Each queue entry
+ * contains a MAU register struct block.
+ *
+ * The privileged code then proceeds to add entries to the queue and
+ * then invoke the HV_NCS_QTAIL_UPDATE sub-function.  Since only
+ * synchronous operations are supported by the current hypervisor,
+ * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to
+ * completion and return HV_EOK, or return an error code.
+ *
+ * The real address of the sub-function argument must be aligned on at
+ * least an 8-byte boundary.
+ *
+ * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte
+ * offset, into the queue and must be less than or equal the 'num_ents'
+ * argument given in the HV_NCS_QCONF call.
+ */
+#define HV_FAST_NCS_REQUEST             0x110
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_ncs_request(unsigned long request,
+                                       unsigned long arg_ra,
+                                       unsigned long arg_size);
+#endif
+
+#define HV_FAST_FIRE_GET_PERFREG        0x120
+#define HV_FAST_FIRE_SET_PERFREG        0x121
+
+/* Function numbers for HV_CORE_TRAP.  */
+#define HV_CORE_SET_VER                 0x00
+#define HV_CORE_PUTCHAR                 0x01
+#define HV_CORE_EXIT                    0x02
+#define HV_CORE_GET_VER                 0x03
+
+/* Hypervisor API groups for use with HV_CORE_SET_VER and
+ * HV_CORE_GET_VER.
+ */
+#define HV_GRP_SUN4V                    0x0000
+#define HV_GRP_CORE                     0x0001
+#define HV_GRP_INTR                     0x0002
+#define HV_GRP_SOFT_STATE               0x0003
+#define HV_GRP_PCI                      0x0100
+#define HV_GRP_LDOM                     0x0101
+#define HV_GRP_SVC_CHAN                 0x0102
+#define HV_GRP_NCS                      0x0103
+#define HV_GRP_RNG                      0x0104
+#define HV_GRP_NIAG_PERF                0x0200
+#define HV_GRP_FIRE_PERF                0x0201
+#define HV_GRP_N2_CPU                   0x0202
+#define HV_GRP_NIU                      0x0204
+#define HV_GRP_VF_CPU                   0x0205
+#define HV_GRP_DIAG                     0x0300
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_get_version(unsigned long group,
+                                       unsigned long *major,
+                                       unsigned long *minor);
+extern unsigned long sun4v_set_version(unsigned long group,
+                                       unsigned long major,
+                                       unsigned long minor,
+                                       unsigned long *actual_minor);
+
+extern int sun4v_hvapi_register(unsigned long group, unsigned long major,
+                                unsigned long *minor);
+extern void sun4v_hvapi_unregister(unsigned long group);
+extern int sun4v_hvapi_get(unsigned long group,
+                           unsigned long *major,
+                           unsigned long *minor);
+extern void sun4v_hvapi_init(void);
+#endif
+
+#endif /* !(_SPARC64_HYPERVISOR_H) */
diff --git a/arch/sparc/include/asm/ide.h b/arch/sparc/include/asm/ide.h
new file mode 100644
index 000000000000..b7af3d658239
--- /dev/null
+++ b/arch/sparc/include/asm/ide.h
@@ -0,0 +1,97 @@
+/* ide.h: SPARC PCI specific IDE glue.
+ *
+ * Copyright (C) 1997  David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
+ * Adaptation from sparc64 version to sparc by Pete Zaitcev.
+ */
+
+#ifndef _SPARC_IDE_H
+#define _SPARC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+#ifdef CONFIG_SPARC64
+#include <asm/pgalloc.h>
+#include <asm/spitfire.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+#else
+#include <asm/pgtable.h>
+#include <asm/psr.h>
+#endif
+
+#define __ide_insl(data_reg, buffer, wcount) \
+        __ide_insw(data_reg, buffer, (wcount)<<1)
+#define __ide_outsl(data_reg, buffer, wcount) \
+        __ide_outsw(data_reg, buffer, (wcount)<<1)
+
+/* On sparc, I/O ports and MMIO registers are accessed identically.  */
+#define __ide_mm_insw   __ide_insw
+#define __ide_mm_insl   __ide_insl
+#define __ide_mm_outsw  __ide_outsw
+#define __ide_mm_outsl  __ide_outsl
+
+static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
+{
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+        unsigned long end = (unsigned long)dst + (count << 1);
+#endif
+        u16 *ps = dst;
+        u32 *pi;
+
+        if(((unsigned long)ps) & 0x2) {
+                *ps++ = __raw_readw(port);
+                count--;
+        }
+        pi = (u32 *)ps;
+        while(count >= 2) {
+                u32 w;
+
+                w  = __raw_readw(port) << 16;
+                w |= __raw_readw(port);
+                *pi++ = w;
+                count -= 2;
+        }
+        ps = (u16 *)pi;
+        if(count)
+                *ps++ = __raw_readw(port);
+
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+        __flush_dcache_range((unsigned long)dst, end);
+#endif
+}
+
+static inline void __ide_outsw(void __iomem *port, const void *src, u32 count)
+{
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+        unsigned long end = (unsigned long)src + (count << 1);
+#endif
+        const u16 *ps = src;
+        const u32 *pi;
+
+        if(((unsigned long)src) & 0x2) {
+                __raw_writew(*ps++, port);
+                count--;
+        }
+        pi = (const u32 *)ps;
+        while(count >= 2) {
+                u32 w;
+
+                w = *pi++;
+                __raw_writew((w >> 16), port);
+                __raw_writew(w, port);
+                count -= 2;
+        }
+        ps = (const u16 *)pi;
+        if(count)
+                __raw_writew(*ps, port);
+
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+        __flush_dcache_range((unsigned long)src, end);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC_IDE_H */
diff --git a/arch/sparc/include/asm/idprom.h b/arch/sparc/include/asm/idprom.h
new file mode 100644
index 000000000000..6976aa2439c6
--- /dev/null
+++ b/arch/sparc/include/asm/idprom.h
@@ -0,0 +1,25 @@
+/*
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_IDPROM_H
+#define _SPARC_IDPROM_H
+
+#include <linux/types.h>
+
+struct idprom {
+        u8              id_format;      /* Format identifier (always 0x01) */
+        u8              id_machtype;    /* Machine type */
+        u8              id_ethaddr[6];  /* Hardware ethernet address */
+        s32             id_date;        /* Date of manufacture */
+        u32             id_sernum:24;   /* Unique serial number */
+        u8              id_cksum;       /* Checksum - xor of the data bytes */
+        u8              reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
+
+#endif /* !(_SPARC_IDPROM_H) */
diff --git a/arch/sparc/include/asm/intr_queue.h b/arch/sparc/include/asm/intr_queue.h
new file mode 100644
index 000000000000..206077dedc2a
--- /dev/null
+++ b/arch/sparc/include/asm/intr_queue.h
@@ -0,0 +1,15 @@
+#ifndef _SPARC64_INTR_QUEUE_H
+#define _SPARC64_INTR_QUEUE_H
+
+/* Sun4v interrupt queue registers, accessed via ASI_QUEUE.  */
+
+#define INTRQ_CPU_MONDO_HEAD      0x3c0 /* CPU mondo head                 */
+#define INTRQ_CPU_MONDO_TAIL      0x3c8 /* CPU mondo tail                 */
+#define INTRQ_DEVICE_MONDO_HEAD   0x3d0 /* Device mondo head              */
+#define INTRQ_DEVICE_MONDO_TAIL   0x3d8 /* Device mondo tail              */
+#define INTRQ_RESUM_MONDO_HEAD    0x3e0 /* Resumable error mondo head     */
+#define INTRQ_RESUM_MONDO_TAIL    0x3e8 /* Resumable error mondo tail     */
+#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */
+#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */
+
+#endif /* !(_SPARC64_INTR_QUEUE_H) */
diff --git a/arch/sparc/include/asm/io-unit.h b/arch/sparc/include/asm/io-unit.h
new file mode 100644
index 000000000000..96823b47fd45
--- /dev/null
+++ b/arch/sparc/include/asm/io-unit.h
@@ -0,0 +1,62 @@
+/* io-unit.h: Definitions for the sun4d IO-UNIT.
+ *
+ * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_IO_UNIT_H
+#define _SPARC_IO_UNIT_H
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/* The io-unit handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory.  Access by
+ * the cpu to IO registers and similar go over the xdbus so are
+ * translated by the on chip SRMMU.  The io-unit and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the io-unit handles all dvma sbus activity.
+ */
+ 
+/* AIEEE, unlike the nice sun4m, these monsters have 
+   fixed DMA range 64M */
+ 
+#define IOUNIT_DMA_BASE     0xfc000000 /* TOP - 64M */
+#define IOUNIT_DMA_SIZE     0x04000000 /* 64M */
+/* We use last 1M for sparc_dvma_malloc */
+#define IOUNIT_DVMA_SIZE    0x00100000 /* 1M */
+
+/* The format of an iopte in the external page tables */
+#define IOUPTE_PAGE          0xffffff00 /* Physical page number (PA[35:12])     */
+#define IOUPTE_CACHE         0x00000080 /* Cached (in Viking/MXCC)              */
+/* XXX Jakub, find out how to program SBUS streaming cache on XDBUS/sun4d.
+ * XXX Actually, all you should need to do is find out where the registers
+ * XXX are and copy over the sparc64 implementation I wrote.  There may be
+ * XXX some horrible hwbugs though, so be careful.  -DaveM
+ */
+#define IOUPTE_STREAM        0x00000040 /* Translation can use streaming cache  */
+#define IOUPTE_INTRA         0x00000008 /* SBUS direct slot->slot transfer      */
+#define IOUPTE_WRITE         0x00000004 /* Writeable                            */
+#define IOUPTE_VALID         0x00000002 /* IOPTE is valid                       */
+#define IOUPTE_PARITY        0x00000001 /* Parity is checked during DVMA        */
+
+struct iounit_struct {
+        unsigned long           bmap[(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 3)) / sizeof(unsigned long)];
+        spinlock_t              lock;
+        iopte_t                 *page_table;
+        unsigned long           rotor[3];
+        unsigned long           limit[4];
+};
+
+#define IOUNIT_BMAP1_START      0x00000000
+#define IOUNIT_BMAP1_END        (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 1))
+#define IOUNIT_BMAP2_START      IOUNIT_BMAP1_END
+#define IOUNIT_BMAP2_END        IOUNIT_BMAP2_START + (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 2))
+#define IOUNIT_BMAPM_START      IOUNIT_BMAP2_END
+#define IOUNIT_BMAPM_END        ((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT)
+
+extern __u32 iounit_map_dma_init(struct sbus_bus *, int);
+#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus)
+extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *);
+
+#endif /* !(_SPARC_IO_UNIT_H) */
diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h
new file mode 100644
index 000000000000..a34b2994937a
--- /dev/null
+++ b/arch/sparc/include/asm/io.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IO_H
+#define ___ASM_SPARC_IO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/io_64.h>
+#else
+#include <asm/io_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h
new file mode 100644
index 000000000000..10d7da450070
--- /dev/null
+++ b/arch/sparc/include/asm/io_32.h
@@ -0,0 +1,326 @@
+#ifndef __SPARC_IO_H
+#define __SPARC_IO_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>  /* struct resource */
+
+#include <asm/page.h>      /* IO address mapping routines need this */
+#include <asm/system.h>
+
+#define page_to_phys(page)      (((page) - mem_map) << PAGE_SHIFT)
+
+static inline u32 flip_dword (u32 l)
+{
+        return ((l&0xff)<<24) | (((l>>8)&0xff)<<16) | (((l>>16)&0xff)<<8)| ((l>>24)&0xff);
+}
+
+static inline u16 flip_word (u16 w)
+{
+        return ((w&0xff) << 8) | ((w>>8)&0xff);
+}
+
+#define mmiowb()
+
+/*
+ * Memory mapped I/O to PCI
+ */
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+        return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+        return *(__force volatile u16 *)addr;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+        return *(__force volatile u32 *)addr;
+}
+
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+        *(__force volatile u8 *)addr = b;
+}
+
+static inline void __raw_writew(u16 w, volatile void __iomem *addr)
+{
+        *(__force volatile u16 *)addr = w;
+}
+
+static inline void __raw_writel(u32 l, volatile void __iomem *addr)
+{
+        *(__force volatile u32 *)addr = l;
+}
+
+static inline u8 __readb(const volatile void __iomem *addr)
+{
+        return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __readw(const volatile void __iomem *addr)
+{
+        return flip_word(*(__force volatile u16 *)addr);
+}
+
+static inline u32 __readl(const volatile void __iomem *addr)
+{
+        return flip_dword(*(__force volatile u32 *)addr);
+}
+
+static inline void __writeb(u8 b, volatile void __iomem *addr)
+{
+        *(__force volatile u8 *)addr = b;
+}
+
+static inline void __writew(u16 w, volatile void __iomem *addr)
+{
+        *(__force volatile u16 *)addr = flip_word(w);
+}
+
+static inline void __writel(u32 l, volatile void __iomem *addr)
+{
+        *(__force volatile u32 *)addr = flip_dword(l);
+}
+
+#define readb(__addr)           __readb(__addr)
+#define readw(__addr)           __readw(__addr)
+#define readl(__addr)           __readl(__addr)
+#define readb_relaxed(__addr)   readb(__addr)
+#define readw_relaxed(__addr)   readw(__addr)
+#define readl_relaxed(__addr)   readl(__addr)
+
+#define writeb(__b, __addr)     __writeb((__b),(__addr))
+#define writew(__w, __addr)     __writew((__w),(__addr))
+#define writel(__l, __addr)     __writel((__l),(__addr))
+
+/*
+ * I/O space operations
+ *
+ * Arrangement on a Sun is somewhat complicated.
+ *
+ * First of all, we want to use standard Linux drivers
+ * for keyboard, PC serial, etc. These drivers think
+ * they access I/O space and use inb/outb.
+ * On the other hand, EBus bridge accepts PCI *memory*
+ * cycles and converts them into ISA *I/O* cycles.
+ * Ergo, we want inb & outb to generate PCI memory cycles.
+ *
+ * If we want to issue PCI *I/O* cycles, we do this
+ * with a low 64K fixed window in PCIC. This window gets
+ * mapped somewhere into virtual kernel space and we
+ * can use inb/outb again.
+ */
+#define inb_local(__addr)       __readb((void __iomem *)(unsigned long)(__addr))
+#define inb(__addr)             __readb((void __iomem *)(unsigned long)(__addr))
+#define inw(__addr)             __readw((void __iomem *)(unsigned long)(__addr))
+#define inl(__addr)             __readl((void __iomem *)(unsigned long)(__addr))
+
+#define outb_local(__b, __addr) __writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outb(__b, __addr)       __writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outw(__w, __addr)       __writew(__w, (void __iomem *)(unsigned long)(__addr))
+#define outl(__l, __addr)       __writel(__l, (void __iomem *)(unsigned long)(__addr))
+
+#define inb_p(__addr)           inb(__addr)
+#define outb_p(__b, __addr)     outb(__b, __addr)
+#define inw_p(__addr)           inw(__addr)
+#define outw_p(__w, __addr)     outw(__w, __addr)
+#define inl_p(__addr)           inl(__addr)
+#define outl_p(__l, __addr)     outl(__l, __addr)
+
+void outsb(unsigned long addr, const void *src, unsigned long cnt);
+void outsw(unsigned long addr, const void *src, unsigned long cnt);
+void outsl(unsigned long addr, const void *src, unsigned long cnt);
+void insb(unsigned long addr, void *dst, unsigned long count);
+void insw(unsigned long addr, void *dst, unsigned long count);
+void insl(unsigned long addr, void *dst, unsigned long count);
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * SBus accessors.
+ *
+ * SBus has only one, memory mapped, I/O space.
+ * We do not need to flip bytes for SBus of course.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+        return *(__force volatile u8 *)addr;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+        return *(__force volatile u16 *)addr;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+        return *(__force volatile u32 *)addr;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+        *(__force volatile u8 *)addr = b;
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+        *(__force volatile u16 *)addr = w;
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+        *(__force volatile u32 *)addr = l;
+}
+
+/*
+ * The only reason for #define's is to hide casts to unsigned long.
+ */
+#define sbus_readb(__addr)              _sbus_readb(__addr)
+#define sbus_readw(__addr)              _sbus_readw(__addr)
+#define sbus_readl(__addr)              _sbus_readl(__addr)
+#define sbus_writeb(__b, __addr)        _sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr)        _sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr)        _sbus_writel(__l, __addr)
+
+static inline void sbus_memset_io(volatile void __iomem *__dst, int c, __kernel_size_t n)
+{
+        while(n--) {
+                sbus_writeb(c, __dst);
+                __dst++;
+        }
+}
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+        volatile void __iomem *d = dst;
+
+        while (n--) {
+                writeb(c, d);
+                d++;
+        }
+}
+
+#define memset_io(d,c,sz)       _memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+        char *d = dst;
+
+        while (n--) {
+                char tmp = readb(src);
+                *d++ = tmp;
+                src++;
+        }
+}
+
+#define memcpy_fromio(d,s,sz)   _memcpy_fromio(d,s,sz)
+
+static inline void
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+        const char *s = src;
+        volatile void __iomem *d = dst;
+
+        while (n--) {
+                char tmp = *s++;
+                writeb(tmp, d);
+                d++;
+        }
+}
+
+#define memcpy_toio(d,s,sz)     _memcpy_toio(d,s,sz)
+
+#ifdef __KERNEL__
+
+/*
+ * Bus number may be embedded in the higher bits of the physical address.
+ * This is why we have no bus number argument to ioremap().
+ */
+extern void __iomem *ioremap(unsigned long offset, unsigned long size);
+#define ioremap_nocache(X,Y)    ioremap((X),(Y))
+#define ioremap_wc(X,Y)         ioremap((X),(Y))
+extern void iounmap(volatile void __iomem *addr);
+
+#define ioread8(X)                      readb(X)
+#define ioread16(X)                     readw(X)
+#define ioread32(X)                     readl(X)
+#define iowrite8(val,X)                 writeb(val,X)
+#define iowrite16(val,X)                writew(val,X)
+#define iowrite32(val,X)                writel(val,X)
+
+static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
+{
+        insb((unsigned long __force)port, buf, count);
+}
+static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
+{
+        insw((unsigned long __force)port, buf, count);
+}
+
+static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
+{
+        insl((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+        outsb((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+        outsw((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+        outsl((unsigned long __force)port, buf, count);
+}
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/*
+ * Bus number may be in res->flags... somewhere.
+ */
+extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset,
+    unsigned long size, char *name);
+extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
+
+
+/*
+ * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
+ * so rtc_port is static in it. This should not change unless a new
+ * hardware pops up.
+ */
+#define RTC_PORT(x)   (rtc_port + (x))
+#define RTC_ALWAYS_BCD  0
+
+#endif
+
+#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED          1
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+#endif /* !(__SPARC_IO_H) */
diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h
new file mode 100644
index 000000000000..0bff078ffdd0
--- /dev/null
+++ b/arch/sparc/include/asm/io_64.h
@@ -0,0 +1,511 @@
+#ifndef __SPARC64_IO_H
+#define __SPARC64_IO_H
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#include <asm/page.h>      /* IO address mapping routines need this */
+#include <asm/system.h>
+#include <asm/asi.h>
+
+/* PC crapola... */
+#define __SLOW_DOWN_IO  do { } while (0)
+#define SLOW_DOWN_IO    do { } while (0)
+
+/* BIO layer definitions. */
+extern unsigned long kern_base, kern_size;
+#define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
+
+static inline u8 _inb(unsigned long addr)
+{
+        u8 ret;
+
+        __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+
+        return ret;
+}
+
+static inline u16 _inw(unsigned long addr)
+{
+        u16 ret;
+
+        __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+
+        return ret;
+}
+
+static inline u32 _inl(unsigned long addr)
+{
+        u32 ret;
+
+        __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+
+        return ret;
+}
+
+static inline void _outb(u8 b, unsigned long addr)
+{
+        __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
+                             : /* no outputs */
+                             : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+}
+
+static inline void _outw(u16 w, unsigned long addr)
+{
+        __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
+                             : /* no outputs */
+                             : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+}
+
+static inline void _outl(u32 l, unsigned long addr)
+{
+        __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
+                             : /* no outputs */
+                             : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+}
+
+#define inb(__addr)             (_inb((unsigned long)(__addr)))
+#define inw(__addr)             (_inw((unsigned long)(__addr)))
+#define inl(__addr)             (_inl((unsigned long)(__addr)))
+#define outb(__b, __addr)       (_outb((u8)(__b), (unsigned long)(__addr)))
+#define outw(__w, __addr)       (_outw((u16)(__w), (unsigned long)(__addr)))
+#define outl(__l, __addr)       (_outl((u32)(__l), (unsigned long)(__addr)))
+
+#define inb_p(__addr)           inb(__addr)
+#define outb_p(__b, __addr)     outb(__b, __addr)
+#define inw_p(__addr)           inw(__addr)
+#define outw_p(__w, __addr)     outw(__w, __addr)
+#define inl_p(__addr)           inl(__addr)
+#define outl_p(__l, __addr)     outl(__l, __addr)
+
+extern void outsb(unsigned long, const void *, unsigned long);
+extern void outsw(unsigned long, const void *, unsigned long);
+extern void outsl(unsigned long, const void *, unsigned long);
+extern void insb(unsigned long, void *, unsigned long);
+extern void insw(unsigned long, void *, unsigned long);
+extern void insl(unsigned long, void *, unsigned long);
+
+static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
+{
+        insb((unsigned long __force)port, buf, count);
+}
+static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
+{
+        insw((unsigned long __force)port, buf, count);
+}
+
+static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
+{
+        insl((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+        outsb((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+        outsw((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+        outsl((unsigned long __force)port, buf, count);
+}
+
+/* Memory functions, same as I/O accesses on Ultra. */
+static inline u8 _readb(const volatile void __iomem *addr)
+{       u8 ret;
+
+        __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+        return ret;
+}
+
+static inline u16 _readw(const volatile void __iomem *addr)
+{       u16 ret;
+
+        __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+
+        return ret;
+}
+
+static inline u32 _readl(const volatile void __iomem *addr)
+{       u32 ret;
+
+        __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+
+        return ret;
+}
+
+static inline u64 _readq(const volatile void __iomem *addr)
+{       u64 ret;
+
+        __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+
+        return ret;
+}
+
+static inline void _writeb(u8 b, volatile void __iomem *addr)
+{
+        __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
+                             : /* no outputs */
+                             : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+}
+
+static inline void _writew(u16 w, volatile void __iomem *addr)
+{
+        __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
+                             : /* no outputs */
+                             : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+}
+
+static inline void _writel(u32 l, volatile void __iomem *addr)
+{
+        __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
+                             : /* no outputs */
+                             : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+}
+
+static inline void _writeq(u64 q, volatile void __iomem *addr)
+{
+        __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
+                             : /* no outputs */
+                             : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+                             : "memory");
+}
+
+#define readb(__addr)           _readb(__addr)
+#define readw(__addr)           _readw(__addr)
+#define readl(__addr)           _readl(__addr)
+#define readq(__addr)           _readq(__addr)
+#define readb_relaxed(__addr)   _readb(__addr)
+#define readw_relaxed(__addr)   _readw(__addr)
+#define readl_relaxed(__addr)   _readl(__addr)
+#define readq_relaxed(__addr)   _readq(__addr)
+#define writeb(__b, __addr)     _writeb(__b, __addr)
+#define writew(__w, __addr)     _writew(__w, __addr)
+#define writel(__l, __addr)     _writel(__l, __addr)
+#define writeq(__q, __addr)     _writeq(__q, __addr)
+
+/* Now versions without byte-swapping. */
+static inline u8 _raw_readb(unsigned long addr)
+{
+        u8 ret;
+
+        __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_raw_readb */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+        return ret;
+}
+
+static inline u16 _raw_readw(unsigned long addr)
+{
+        u16 ret;
+
+        __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_raw_readw */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+        return ret;
+}
+
+static inline u32 _raw_readl(unsigned long addr)
+{
+        u32 ret;
+
+        __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_raw_readl */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+        return ret;
+}
+
+static inline u64 _raw_readq(unsigned long addr)
+{
+        u64 ret;
+
+        __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_raw_readq */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+        return ret;
+}
+
+static inline void _raw_writeb(u8 b, unsigned long addr)
+{
+        __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_raw_writeb */"
+                             : /* no outputs */
+                             : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writew(u16 w, unsigned long addr)
+{
+        __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_raw_writew */"
+                             : /* no outputs */
+                             : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writel(u32 l, unsigned long addr)
+{
+        __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_raw_writel */"
+                             : /* no outputs */
+                             : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writeq(u64 q, unsigned long addr)
+{
+        __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_raw_writeq */"
+                             : /* no outputs */
+                             : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define __raw_readb(__addr)             (_raw_readb((unsigned long)(__addr)))
+#define __raw_readw(__addr)             (_raw_readw((unsigned long)(__addr)))
+#define __raw_readl(__addr)             (_raw_readl((unsigned long)(__addr)))
+#define __raw_readq(__addr)             (_raw_readq((unsigned long)(__addr)))
+#define __raw_writeb(__b, __addr)       (_raw_writeb((u8)(__b), (unsigned long)(__addr)))
+#define __raw_writew(__w, __addr)       (_raw_writew((u16)(__w), (unsigned long)(__addr)))
+#define __raw_writel(__l, __addr)       (_raw_writel((u32)(__l), (unsigned long)(__addr)))
+#define __raw_writeq(__q, __addr)       (_raw_writeq((u64)(__q), (unsigned long)(__addr)))
+
+/* Valid I/O Space regions are anywhere, because each PCI bus supported
+ * can live in an arbitrary area of the physical address range.
+ */
+#define IO_SPACE_LIMIT 0xffffffffffffffffUL
+
+/* Now, SBUS variants, only difference from PCI is that we do
+ * not use little-endian ASIs.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+        u8 ret;
+
+        __asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+                             : "memory");
+
+        return ret;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+        u16 ret;
+
+        __asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+                             : "memory");
+
+        return ret;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+        u32 ret;
+
+        __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+                             : "memory");
+
+        return ret;
+}
+
+static inline u64 _sbus_readq(const volatile void __iomem *addr)
+{
+        u64 ret;
+
+        __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+                             : "memory");
+
+        return ret;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+        __asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */"
+                             : /* no outputs */
+                             : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+                             : "memory");
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+        __asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */"
+                             : /* no outputs */
+                             : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+                             : "memory");
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+        __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */"
+                             : /* no outputs */
+                             : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+                             : "memory");
+}
+
+static inline void _sbus_writeq(u64 l, volatile void __iomem *addr)
+{
+        __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */"
+                             : /* no outputs */
+                             : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+                             : "memory");
+}
+
+#define sbus_readb(__addr)              _sbus_readb(__addr)
+#define sbus_readw(__addr)              _sbus_readw(__addr)
+#define sbus_readl(__addr)              _sbus_readl(__addr)
+#define sbus_readq(__addr)              _sbus_readq(__addr)
+#define sbus_writeb(__b, __addr)        _sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr)        _sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr)        _sbus_writel(__l, __addr)
+#define sbus_writeq(__l, __addr)        _sbus_writeq(__l, __addr)
+
+static inline void _sbus_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+        while(n--) {
+                sbus_writeb(c, dst);
+                dst++;
+        }
+}
+
+#define sbus_memset_io(d,c,sz)  _sbus_memset_io(d,c,sz)
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+        volatile void __iomem *d = dst;
+
+        while (n--) {
+                writeb(c, d);
+                d++;
+        }
+}
+
+#define memset_io(d,c,sz)       _memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+        char *d = dst;
+
+        while (n--) {
+                char tmp = readb(src);
+                *d++ = tmp;
+                src++;
+        }
+}
+
+#define memcpy_fromio(d,s,sz)   _memcpy_fromio(d,s,sz)
+
+static inline void
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+        const char *s = src;
+        volatile void __iomem *d = dst;
+
+        while (n--) {
+                char tmp = *s++;
+                writeb(tmp, d);
+                d++;
+        }
+}
+
+#define memcpy_toio(d,s,sz)     _memcpy_toio(d,s,sz)
+
+#define mmiowb()
+
+#ifdef __KERNEL__
+
+/* On sparc64 we have the whole physical IO address space accessible
+ * using physically addressed loads and stores, so this does nothing.
+ */
+static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+{
+        return (void __iomem *)offset;
+}
+
+#define ioremap_nocache(X,Y)            ioremap((X),(Y))
+#define ioremap_wc(X,Y)                 ioremap((X),(Y))
+
+static inline void iounmap(volatile void __iomem *addr)
+{
+}
+
+#define ioread8(X)                      readb(X)
+#define ioread16(X)                     readw(X)
+#define ioread32(X)                     readl(X)
+#define iowrite8(val,X)                 writeb(val,X)
+#define iowrite16(val,X)                writew(val,X)
+#define iowrite32(val,X)                writel(val,X)
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/* Similarly for SBUS. */
+#define sbus_ioremap(__res, __offset, __size, __name) \
+({      unsigned long __ret; \
+        __ret  = (__res)->start + (((__res)->flags & 0x1ffUL) << 32UL); \
+        __ret += (unsigned long) (__offset); \
+        if (! request_region((__ret), (__size), (__name))) \
+                __ret = 0UL; \
+        (void __iomem *) __ret; \
+})
+
+#define sbus_iounmap(__addr, __size)    \
+        release_region((unsigned long)(__addr), (__size))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+#endif
+
+#endif /* !(__SPARC64_IO_H) */
diff --git a/arch/sparc/include/asm/ioctl.h b/arch/sparc/include/asm/ioctl.h
new file mode 100644
index 000000000000..7d6bd51321b9
--- /dev/null
+++ b/arch/sparc/include/asm/ioctl.h
@@ -0,0 +1,67 @@
+#ifndef _SPARC_IOCTL_H
+#define _SPARC_IOCTL_H
+
+/*
+ * Our DIR and SIZE overlap in order to simulteneously provide
+ * a non-zero _IOC_NONE (for binary compatibility) and
+ * 14 bits of size as on i386. Here's the layout:
+ *
+ *   0xE0000000   DIR
+ *   0x80000000     DIR = WRITE
+ *   0x40000000     DIR = READ
+ *   0x20000000     DIR = NONE
+ *   0x3FFF0000   SIZE (overlaps NONE bit)
+ *   0x0000FF00   TYPE
+ *   0x000000FF   NR (CMD)
+ */
+
+#define _IOC_NRBITS      8
+#define _IOC_TYPEBITS    8
+#define _IOC_SIZEBITS   13      /* Actually 14, see below. */
+#define _IOC_DIRBITS     3
+
+#define _IOC_NRMASK      ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK    ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK    ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_XSIZEMASK   ((1 << (_IOC_SIZEBITS+1))-1)
+#define _IOC_DIRMASK     ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT     0
+#define _IOC_TYPESHIFT   (_IOC_NRSHIFT + _IOC_NRBITS)
+#define _IOC_SIZESHIFT   (_IOC_TYPESHIFT + _IOC_TYPEBITS)
+#define _IOC_DIRSHIFT    (_IOC_SIZESHIFT + _IOC_SIZEBITS)
+
+#define _IOC_NONE        1U
+#define _IOC_READ        2U
+#define _IOC_WRITE       4U
+
+#define _IOC(dir,type,nr,size) \
+        (((dir)  << _IOC_DIRSHIFT) | \
+         ((type) << _IOC_TYPESHIFT) | \
+         ((nr)   << _IOC_NRSHIFT) | \
+         ((size) << _IOC_SIZESHIFT))
+
+#define _IO(type,nr)        _IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)  _IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)  _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* Used to decode ioctl numbers in drivers despite the leading underscore... */
+#define _IOC_DIR(nr)    \
+ ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)?   \
+                            (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)):  \
+                            (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) )
+#define _IOC_TYPE(nr)       (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)         (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)   \
+ ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)?    \
+                         0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK))
+
+/* ...and for the PCMCIA and sound. */
+#define IOC_IN          (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT         (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT       ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK    (_IOC_XSIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT   (_IOC_SIZESHIFT)
+
+#endif /* !(_SPARC_IOCTL_H) */
diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h
new file mode 100644
index 000000000000..1fe6855c5c18
--- /dev/null
+++ b/arch/sparc/include/asm/ioctls.h
@@ -0,0 +1,136 @@
+#ifndef _ASM_SPARC_IOCTLS_H
+#define _ASM_SPARC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* Big T */
+#define TCGETA          _IOR('T', 1, struct termio)
+#define TCSETA          _IOW('T', 2, struct termio)
+#define TCSETAW         _IOW('T', 3, struct termio)
+#define TCSETAF         _IOW('T', 4, struct termio)
+#define TCSBRK          _IO('T', 5)
+#define TCXONC          _IO('T', 6)
+#define TCFLSH          _IO('T', 7)
+#define TCGETS          _IOR('T', 8, struct termios)
+#define TCSETS          _IOW('T', 9, struct termios)
+#define TCSETSW         _IOW('T', 10, struct termios)
+#define TCSETSF         _IOW('T', 11, struct termios)
+#define TCGETS2         _IOR('T', 12, struct termios2)
+#define TCSETS2         _IOW('T', 13, struct termios2)
+#define TCSETSW2        _IOW('T', 14, struct termios2)
+#define TCSETSF2        _IOW('T', 15, struct termios2)
+
+/* Note that all the ioctls that are not available in Linux have a 
+ * double underscore on the front to: a) avoid some programs to
+ * think we support some ioctls under Linux (autoconfiguration stuff)
+ */
+/* Little t */
+#define TIOCGETD        _IOR('t', 0, int)
+#define TIOCSETD        _IOW('t', 1, int)
+#define __TIOCHPCL        _IO('t', 2) /* SunOS Specific */
+#define __TIOCMODG        _IOR('t', 3, int) /* SunOS Specific */
+#define __TIOCMODS        _IOW('t', 4, int) /* SunOS Specific */
+#define __TIOCGETP        _IOR('t', 8, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETP        _IOW('t', 9, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETN        _IOW('t', 10, struct sgttyb) /* SunOS Specific */
+#define TIOCEXCL        _IO('t', 13)
+#define TIOCNXCL        _IO('t', 14)
+#define __TIOCFLUSH       _IOW('t', 16, int) /* SunOS Specific */
+#define __TIOCSETC        _IOW('t', 17, struct tchars) /* SunOS Specific */
+#define __TIOCGETC        _IOR('t', 18, struct tchars) /* SunOS Specific */
+#define __TIOCTCNTL       _IOW('t', 32, int) /* SunOS Specific */
+#define __TIOCSIGNAL      _IOW('t', 33, int) /* SunOS Specific */
+#define __TIOCSETX        _IOW('t', 34, int) /* SunOS Specific */
+#define __TIOCGETX        _IOR('t', 35, int) /* SunOS Specific */
+#define TIOCCONS        _IO('t', 36)
+#define TIOCGSOFTCAR    _IOR('t', 100, int)
+#define TIOCSSOFTCAR    _IOW('t', 101, int)
+#define __TIOCUCNTL       _IOW('t', 102, int) /* SunOS Specific */
+#define TIOCSWINSZ      _IOW('t', 103, struct winsize)
+#define TIOCGWINSZ      _IOR('t', 104, struct winsize)
+#define __TIOCREMOTE      _IOW('t', 105, int) /* SunOS Specific */
+#define TIOCMGET        _IOR('t', 106, int)
+#define TIOCMBIC        _IOW('t', 107, int)
+#define TIOCMBIS        _IOW('t', 108, int)
+#define TIOCMSET        _IOW('t', 109, int)
+#define TIOCSTART       _IO('t', 110)
+#define TIOCSTOP        _IO('t', 111)
+#define TIOCPKT         _IOW('t', 112, int)
+#define TIOCNOTTY       _IO('t', 113)
+#define TIOCSTI         _IOW('t', 114, char)
+#define TIOCOUTQ        _IOR('t', 115, int)
+#define __TIOCGLTC        _IOR('t', 116, struct ltchars) /* SunOS Specific */
+#define __TIOCSLTC        _IOW('t', 117, struct ltchars) /* SunOS Specific */
+/* 118 is the non-posix setpgrp tty ioctl */
+/* 119 is the non-posix getpgrp tty ioctl */
+#define __TIOCCDTR        _IO('t', 120) /* SunOS Specific */
+#define __TIOCSDTR        _IO('t', 121) /* SunOS Specific */
+#define TIOCCBRK        _IO('t', 122)
+#define TIOCSBRK        _IO('t', 123)
+#define __TIOCLGET        _IOW('t', 124, int) /* SunOS Specific */
+#define __TIOCLSET        _IOW('t', 125, int) /* SunOS Specific */
+#define __TIOCLBIC        _IOW('t', 126, int) /* SunOS Specific */
+#define __TIOCLBIS        _IOW('t', 127, int) /* SunOS Specific */
+#define __TIOCISPACE      _IOR('t', 128, int) /* SunOS Specific */
+#define __TIOCISIZE       _IOR('t', 129, int) /* SunOS Specific */
+#define TIOCSPGRP       _IOW('t', 130, int)
+#define TIOCGPGRP       _IOR('t', 131, int)
+#define TIOCSCTTY       _IO('t', 132)
+#define TIOCGSID        _IOR('t', 133, int)
+/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
+#define TIOCGPTN        _IOR('t', 134, unsigned int) /* Get Pty Number */
+#define TIOCSPTLCK      _IOW('t', 135, int) /* Lock/unlock PTY */
+
+/* Little f */
+#define FIOCLEX         _IO('f', 1)
+#define FIONCLEX        _IO('f', 2)
+#define FIOASYNC        _IOW('f', 125, int)
+#define FIONBIO         _IOW('f', 126, int)
+#define FIONREAD        _IOR('f', 127, int)
+#define TIOCINQ         FIONREAD
+#define FIOQSIZE        _IOR('f', 128, loff_t)
+
+/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it
+ * someday.  This is completely bogus, I know...
+ */
+#define __TCGETSTAT       _IO('T', 200) /* Rutgers specific */
+#define __TCSETSTAT       _IO('T', 201) /* Rutgers specific */
+
+/* Linux specific, no SunOS equivalent. */
+#define TIOCLINUX       0x541C
+#define TIOCGSERIAL     0x541E
+#define TIOCSSERIAL     0x541F
+#define TCSBRKP         0x5425
+#define TIOCSERCONFIG   0x5453
+#define TIOCSERGWILD    0x5454
+#define TIOCSERSWILD    0x5455
+#define TIOCGLCKTRMIOS  0x5456
+#define TIOCSLCKTRMIOS  0x5457
+#define TIOCSERGSTRUCT  0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+#define TIOCMIWAIT      0x545C /* Wait for change on serial input line(s) */
+#define TIOCGICOUNT     0x545D /* Read serial port inline interrupt counts */
+
+/* Kernel definitions */
+#ifdef __KERNEL__
+#define TIOCGETC __TIOCGETC
+#define TIOCGETP __TIOCGETP
+#define TIOCGLTC __TIOCGLTC
+#define TIOCSLTC __TIOCSLTC
+#define TIOCSETP __TIOCSETP
+#define TIOCSETN __TIOCSETN
+#define TIOCSETC __TIOCSETC
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA             0
+#define TIOCPKT_FLUSHREAD        1
+#define TIOCPKT_FLUSHWRITE       2
+#define TIOCPKT_STOP             4
+#define TIOCPKT_START            8
+#define TIOCPKT_NOSTOP          16
+#define TIOCPKT_DOSTOP          32
+
+#endif /* !(_ASM_SPARC_IOCTLS_H) */
diff --git a/arch/sparc/include/asm/iommu.h b/arch/sparc/include/asm/iommu.h
new file mode 100644
index 000000000000..e650965b4a8d
--- /dev/null
+++ b/arch/sparc/include/asm/iommu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IOMMU_H
+#define ___ASM_SPARC_IOMMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/iommu_64.h>
+#else
+#include <asm/iommu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/iommu_32.h b/arch/sparc/include/asm/iommu_32.h
new file mode 100644
index 000000000000..70c589c05a10
--- /dev/null
+++ b/arch/sparc/include/asm/iommu_32.h
@@ -0,0 +1,121 @@
+/* iommu.h: Definitions for the sun4m IOMMU.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_IOMMU_H
+#define _SPARC_IOMMU_H
+
+#include <asm/page.h>
+#include <asm/bitext.h>
+
+/* The iommu handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory.  Access by
+ * the cpu to IO registers and similar go over the mbus so are
+ * translated by the on chip SRMMU.  The iommu and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the iommu handles all dvma sbus activity.
+ */
+
+/* The IOMMU registers occupy three pages in IO space. */
+struct iommu_regs {
+        /* First page */
+        volatile unsigned long control;    /* IOMMU control */
+        volatile unsigned long base;       /* Physical base of iopte page table */
+        volatile unsigned long _unused1[3];
+        volatile unsigned long tlbflush;   /* write only */
+        volatile unsigned long pageflush;  /* write only */
+        volatile unsigned long _unused2[1017];
+        /* Second page */
+        volatile unsigned long afsr;       /* Async-fault status register */
+        volatile unsigned long afar;       /* Async-fault physical address */
+        volatile unsigned long _unused3[2];
+        volatile unsigned long sbuscfg0;   /* SBUS configuration registers, per-slot */
+        volatile unsigned long sbuscfg1;
+        volatile unsigned long sbuscfg2;
+        volatile unsigned long sbuscfg3;
+        volatile unsigned long mfsr;       /* Memory-fault status register */
+        volatile unsigned long mfar;       /* Memory-fault physical address */
+        volatile unsigned long _unused4[1014];
+        /* Third page */
+        volatile unsigned long mid;        /* IOMMU module-id */
+};
+
+#define IOMMU_CTRL_IMPL     0xf0000000 /* Implementation */
+#define IOMMU_CTRL_VERS     0x0f000000 /* Version */
+#define IOMMU_CTRL_RNGE     0x0000001c /* Mapping RANGE */
+#define IOMMU_RNGE_16MB     0x00000000 /* 0xff000000 -> 0xffffffff */
+#define IOMMU_RNGE_32MB     0x00000004 /* 0xfe000000 -> 0xffffffff */
+#define IOMMU_RNGE_64MB     0x00000008 /* 0xfc000000 -> 0xffffffff */
+#define IOMMU_RNGE_128MB    0x0000000c /* 0xf8000000 -> 0xffffffff */
+#define IOMMU_RNGE_256MB    0x00000010 /* 0xf0000000 -> 0xffffffff */
+#define IOMMU_RNGE_512MB    0x00000014 /* 0xe0000000 -> 0xffffffff */
+#define IOMMU_RNGE_1GB      0x00000018 /* 0xc0000000 -> 0xffffffff */
+#define IOMMU_RNGE_2GB      0x0000001c /* 0x80000000 -> 0xffffffff */
+#define IOMMU_CTRL_ENAB     0x00000001 /* IOMMU Enable */
+
+#define IOMMU_AFSR_ERR      0x80000000 /* LE, TO, or BE asserted */
+#define IOMMU_AFSR_LE       0x40000000 /* SBUS reports error after transaction */
+#define IOMMU_AFSR_TO       0x20000000 /* Write access took more than 12.8 us. */
+#define IOMMU_AFSR_BE       0x10000000 /* Write access received error acknowledge */
+#define IOMMU_AFSR_SIZE     0x0e000000 /* Size of transaction causing error */
+#define IOMMU_AFSR_S        0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_AFSR_RESV     0x00f00000 /* Reserver, forced to 0x8 by hardware */
+#define IOMMU_AFSR_ME       0x00080000 /* Multiple errors occurred */
+#define IOMMU_AFSR_RD       0x00040000 /* A read operation was in progress */
+#define IOMMU_AFSR_FAV      0x00020000 /* IOMMU afar has valid contents */
+
+#define IOMMU_SBCFG_SAB30   0x00010000 /* Phys-address bit 30 when bypass enabled */
+#define IOMMU_SBCFG_BA16    0x00000004 /* Slave supports 16 byte bursts */
+#define IOMMU_SBCFG_BA8     0x00000002 /* Slave supports 8 byte bursts */
+#define IOMMU_SBCFG_BYPASS  0x00000001 /* Bypass IOMMU, treat all addresses
+                                          produced by this device as pure
+                                          physical. */
+
+#define IOMMU_MFSR_ERR      0x80000000 /* One or more of PERR1 or PERR0 */
+#define IOMMU_MFSR_S        0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_MFSR_CPU      0x00800000 /* CPU transaction caused parity error */
+#define IOMMU_MFSR_ME       0x00080000 /* Multiple parity errors occurred */
+#define IOMMU_MFSR_PERR     0x00006000 /* high bit indicates parity error occurred
+                                          on the even word of the access, low bit
+                                          indicated odd word caused the parity error */
+#define IOMMU_MFSR_BM       0x00001000 /* Error occurred while in boot mode */
+#define IOMMU_MFSR_C        0x00000800 /* Address causing error was marked cacheable */
+#define IOMMU_MFSR_RTYP     0x000000f0 /* Memory request transaction type */
+
+#define IOMMU_MID_SBAE      0x001f0000 /* SBus arbitration enable */
+#define IOMMU_MID_SE        0x00100000 /* Enables SCSI/ETHERNET arbitration */
+#define IOMMU_MID_SB3       0x00080000 /* Enable SBUS device 3 arbitration */
+#define IOMMU_MID_SB2       0x00040000 /* Enable SBUS device 2 arbitration */
+#define IOMMU_MID_SB1       0x00020000 /* Enable SBUS device 1 arbitration */
+#define IOMMU_MID_SB0       0x00010000 /* Enable SBUS device 0 arbitration */
+#define IOMMU_MID_MID       0x0000000f /* Module-id, hardcoded to 0x8 */
+
+/* The format of an iopte in the page tables */
+#define IOPTE_PAGE          0x07ffff00 /* Physical page number (PA[30:12]) */
+#define IOPTE_CACHE         0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */
+#define IOPTE_WRITE         0x00000004 /* Writeable */
+#define IOPTE_VALID         0x00000002 /* IOPTE is valid */
+#define IOPTE_WAZ           0x00000001 /* Write as zeros */
+
+struct iommu_struct {
+        struct iommu_regs *regs;
+        iopte_t *page_table;
+        /* For convenience */
+        unsigned long start; /* First managed virtual address */
+        unsigned long end;   /* Last managed virtual address */
+
+        struct bit_map usemap;
+};
+
+static inline void iommu_invalidate(struct iommu_regs *regs)
+{
+        regs->tlbflush = 0;
+}
+
+static inline void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba)
+{
+        regs->pageflush = (ba & PAGE_MASK);
+}
+
+#endif /* !(_SPARC_IOMMU_H) */
diff --git a/arch/sparc/include/asm/iommu_64.h b/arch/sparc/include/asm/iommu_64.h
new file mode 100644
index 000000000000..d7b9afcba08b
--- /dev/null
+++ b/arch/sparc/include/asm/iommu_64.h
@@ -0,0 +1,62 @@
+/* iommu.h: Definitions for the sun5 IOMMU.
+ *
+ * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
+ */
+#ifndef _SPARC64_IOMMU_H
+#define _SPARC64_IOMMU_H
+
+/* The format of an iopte in the page tables. */
+#define IOPTE_VALID   0x8000000000000000UL
+#define IOPTE_64K     0x2000000000000000UL
+#define IOPTE_STBUF   0x1000000000000000UL
+#define IOPTE_INTRA   0x0800000000000000UL
+#define IOPTE_CONTEXT 0x07ff800000000000UL
+#define IOPTE_PAGE    0x00007fffffffe000UL
+#define IOPTE_CACHE   0x0000000000000010UL
+#define IOPTE_WRITE   0x0000000000000002UL
+
+#define IOMMU_NUM_CTXS  4096
+
+struct iommu_arena {
+        unsigned long   *map;
+        unsigned int    hint;
+        unsigned int    limit;
+};
+
+struct iommu {
+        spinlock_t              lock;
+        struct iommu_arena      arena;
+        void                    (*flush_all)(struct iommu *);
+        iopte_t                 *page_table;
+        u32                     page_table_map_base;
+        unsigned long           iommu_control;
+        unsigned long           iommu_tsbbase;
+        unsigned long           iommu_flush;
+        unsigned long           iommu_flushinv;
+        unsigned long           iommu_tags;
+        unsigned long           iommu_ctxflush;
+        unsigned long           write_complete_reg;
+        unsigned long           dummy_page;
+        unsigned long           dummy_page_pa;
+        unsigned long           ctx_lowest_free;
+        DECLARE_BITMAP(ctx_bitmap, IOMMU_NUM_CTXS);
+        u32                     dma_addr_mask;
+};
+
+struct strbuf {
+        int                     strbuf_enabled;
+        unsigned long           strbuf_control;
+        unsigned long           strbuf_pflush;
+        unsigned long           strbuf_fsync;
+        unsigned long           strbuf_ctxflush;
+        unsigned long           strbuf_ctxmatch_base;
+        unsigned long           strbuf_flushflag_pa;
+        volatile unsigned long *strbuf_flushflag;
+        volatile unsigned long  __flushflag_buf[(64+(64-1)) / sizeof(long)];
+};
+
+extern int iommu_table_init(struct iommu *iommu, int tsbsize,
+                            u32 dma_offset, u32 dma_addr_mask,
+                            int numa_node);
+
+#endif /* !(_SPARC64_IOMMU_H) */
diff --git a/arch/sparc/include/asm/ipcbuf.h b/arch/sparc/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..17d6ef7b23a4
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IPCBUF_H
+#define ___ASM_SPARC_IPCBUF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ipcbuf_64.h>
+#else
+#include <asm/ipcbuf_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ipcbuf_32.h b/arch/sparc/include/asm/ipcbuf_32.h
new file mode 100644
index 000000000000..6387209518f2
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf_32.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_IPCBUF_H
+#define _SPARC_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values (so that this structure matches
+ *                                  sparc64 ipc64_perm)
+ */
+
+struct ipc64_perm
+{
+        __kernel_key_t          key;
+        __kernel_uid32_t        uid;
+        __kernel_gid32_t        gid;
+        __kernel_uid32_t        cuid;
+        __kernel_gid32_t        cgid;
+        unsigned short          __pad1;
+        __kernel_mode_t         mode;
+        unsigned short          __pad2;
+        unsigned short          seq;
+        unsigned long long      __unused1;
+        unsigned long long      __unused2;
+};
+
+#endif /* _SPARC_IPCBUF_H */
diff --git a/arch/sparc/include/asm/ipcbuf_64.h b/arch/sparc/include/asm/ipcbuf_64.h
new file mode 100644
index 000000000000..a44b855b98db
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf_64.h
@@ -0,0 +1,28 @@
+#ifndef _SPARC64_IPCBUF_H
+#define _SPARC64_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+        __kernel_key_t  key;
+        __kernel_uid_t  uid;
+        __kernel_gid_t  gid;
+        __kernel_uid_t  cuid;
+        __kernel_gid_t  cgid;
+        __kernel_mode_t mode;
+        unsigned short  __pad1;
+        unsigned short  seq;
+        unsigned long   __unused1;
+        unsigned long   __unused2;
+};
+
+#endif /* _SPARC64_IPCBUF_H */
diff --git a/arch/sparc/include/asm/irq.h b/arch/sparc/include/asm/irq.h
new file mode 100644
index 000000000000..3b44a6a14074
--- /dev/null
+++ b/arch/sparc/include/asm/irq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQ_H
+#define ___ASM_SPARC_IRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irq_64.h>
+#else
+#include <asm/irq_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/irq_32.h b/arch/sparc/include/asm/irq_32.h
new file mode 100644
index 000000000000..fe205cc444b8
--- /dev/null
+++ b/arch/sparc/include/asm/irq_32.h
@@ -0,0 +1,15 @@
+/* irq.h: IRQ registers on the Sparc.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC_IRQ_H
+#define _SPARC_IRQ_H
+
+#include <linux/interrupt.h>
+
+#define NR_IRQS    16
+
+#define irq_canonicalize(irq)   (irq)
+
+#endif
diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
new file mode 100644
index 000000000000..0bb9bf531745
--- /dev/null
+++ b/arch/sparc/include/asm/irq_64.h
@@ -0,0 +1,93 @@
+/* irq.h: IRQ registers on the 64-bit Sparc.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+#ifndef _SPARC64_IRQ_H
+#define _SPARC64_IRQ_H
+
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <asm/pil.h>
+#include <asm/ptrace.h>
+
+/* IMAP/ICLR register defines */
+#define IMAP_VALID              0x80000000UL    /* IRQ Enabled          */
+#define IMAP_TID_UPA            0x7c000000UL    /* UPA TargetID         */
+#define IMAP_TID_JBUS           0x7c000000UL    /* JBUS TargetID        */
+#define IMAP_TID_SHIFT          26
+#define IMAP_AID_SAFARI         0x7c000000UL    /* Safari AgentID       */
+#define IMAP_AID_SHIFT          26
+#define IMAP_NID_SAFARI         0x03e00000UL    /* Safari NodeID        */
+#define IMAP_NID_SHIFT          21
+#define IMAP_IGN                0x000007c0UL    /* IRQ Group Number     */
+#define IMAP_INO                0x0000003fUL    /* IRQ Number           */
+#define IMAP_INR                0x000007ffUL    /* Full interrupt number*/
+
+#define ICLR_IDLE               0x00000000UL    /* Idle state           */
+#define ICLR_TRANSMIT           0x00000001UL    /* Transmit state       */
+#define ICLR_PENDING            0x00000003UL    /* Pending state        */
+
+/* The largest number of unique interrupt sources we support.
+ * If this needs to ever be larger than 255, you need to change
+ * the type of ino_bucket->virt_irq as appropriate.
+ *
+ * ino_bucket->virt_irq allocation is made during {sun4v_,}build_irq().
+ */
+#define NR_IRQS    255
+
+extern void irq_install_pre_handler(int virt_irq,
+                                    void (*func)(unsigned int, void *, void *),
+                                    void *arg1, void *arg2);
+#define irq_canonicalize(irq)   (irq)
+extern unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap);
+extern unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino);
+extern unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino);
+extern unsigned int sun4v_build_msi(u32 devhandle, unsigned int *virt_irq_p,
+                                    unsigned int msi_devino_start,
+                                    unsigned int msi_devino_end);
+extern void sun4v_destroy_msi(unsigned int virt_irq);
+extern unsigned int sun4u_build_msi(u32 portid, unsigned int *virt_irq_p,
+                                    unsigned int msi_devino_start,
+                                    unsigned int msi_devino_end,
+                                    unsigned long imap_base,
+                                    unsigned long iclr_base);
+extern void sun4u_destroy_msi(unsigned int virt_irq);
+extern unsigned int sbus_build_irq(void *sbus, unsigned int ino);
+
+extern unsigned char virt_irq_alloc(unsigned int dev_handle,
+                                    unsigned int dev_ino);
+#ifdef CONFIG_PCI_MSI
+extern void virt_irq_free(unsigned int virt_irq);
+#endif
+
+extern void __init init_IRQ(void);
+extern void fixup_irqs(void);
+
+static inline void set_softint(unsigned long bits)
+{
+        __asm__ __volatile__("wr        %0, 0x0, %%set_softint"
+                             : /* No outputs */
+                             : "r" (bits));
+}
+
+static inline void clear_softint(unsigned long bits)
+{
+        __asm__ __volatile__("wr        %0, 0x0, %%clear_softint"
+                             : /* No outputs */
+                             : "r" (bits));
+}
+
+static inline unsigned long get_softint(void)
+{
+        unsigned long retval;
+
+        __asm__ __volatile__("rd        %%softint, %0"
+                             : "=r" (retval));
+        return retval;
+}
+
+#endif
diff --git a/arch/sparc/include/asm/irq_regs.h b/arch/sparc/include/asm/irq_regs.h
new file mode 100644
index 000000000000..3dd9c0b70270
--- /dev/null
+++ b/arch/sparc/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/sparc/include/asm/irqflags.h b/arch/sparc/include/asm/irqflags.h
new file mode 100644
index 000000000000..1e138632bd3f
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQFLAGS_H
+#define ___ASM_SPARC_IRQFLAGS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irqflags_64.h>
+#else
+#include <asm/irqflags_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h
new file mode 100644
index 000000000000..0fca9d97d44f
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_32.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+extern void raw_local_irq_restore(unsigned long);
+extern unsigned long __raw_local_irq_save(void);
+extern void raw_local_irq_enable(void);
+
+static inline unsigned long getipl(void)
+{
+        unsigned long retval;
+
+        __asm__ __volatile__("rd        %%psr, %0" : "=r" (retval));
+        return retval;
+}
+
+#define raw_local_save_flags(flags) ((flags) = getipl())
+#define raw_local_irq_save(flags)   ((flags) = __raw_local_irq_save())
+#define raw_local_irq_disable()     ((void) __raw_local_irq_save())
+#define raw_irqs_disabled()         ((getipl() & PSR_PIL) != 0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+        return ((flags & PSR_PIL) != 0);
+}
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h
new file mode 100644
index 000000000000..bb42e59162aa
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_64.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+        unsigned long flags;
+
+        __asm__ __volatile__(
+                "rdpr   %%pil, %0"
+                : "=r" (flags)
+        );
+
+        return flags;
+}
+
+#define raw_local_save_flags(flags) \
+                do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+        __asm__ __volatile__(
+                "wrpr   %0, %%pil"
+                : /* no output */
+                : "r" (flags)
+                : "memory"
+        );
+}
+
+static inline void raw_local_irq_disable(void)
+{
+        __asm__ __volatile__(
+                "wrpr   15, %%pil"
+                : /* no outputs */
+                : /* no inputs */
+                : "memory"
+        );
+}
+
+static inline void raw_local_irq_enable(void)
+{
+        __asm__ __volatile__(
+                "wrpr   0, %%pil"
+                : /* no outputs */
+                : /* no inputs */
+                : "memory"
+        );
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+        return (flags > 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+        unsigned long flags = __raw_local_save_flags();
+
+        return raw_irqs_disabled_flags(flags);
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+        unsigned long flags = __raw_local_save_flags();
+
+        raw_local_irq_disable();
+
+        return flags;
+}
+
+#define raw_local_irq_save(flags) \
+                do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/arch/sparc/include/asm/jsflash.h b/arch/sparc/include/asm/jsflash.h
new file mode 100644
index 000000000000..3457f29bd73b
--- /dev/null
+++ b/arch/sparc/include/asm/jsflash.h
@@ -0,0 +1,39 @@
+/*
+ * jsflash.h: OS Flash SIMM support for JavaStations.
+ *
+ * Copyright (C) 1999  Pete Zaitcev
+ */
+
+#ifndef _SPARC_JSFLASH_H
+#define _SPARC_JSFLASH_H
+
+#ifndef _SPARC_TYPES_H
+#include <asm/types.h>
+#endif
+
+/*
+ * Semantics of the offset is a full address.
+ * Hardcode it or get it from probe ioctl.
+ *
+ * We use full bus address, so that we would be
+ * automatically compatible with possible future systems.
+ */
+
+#define JSFLASH_IDENT   (('F'<<8)|54)
+struct jsflash_ident_arg {
+        __u64 off;                /* 0x20000000 is included */
+        __u32 size;
+        char name[32];          /* With trailing zero */
+};
+
+#define JSFLASH_ERASE   (('F'<<8)|55)
+/* Put 0 as argument, may be flags or sector number... */
+
+#define JSFLASH_PROGRAM (('F'<<8)|56)
+struct jsflash_program_arg {
+        __u64 data;             /* char* for sparc and sparc64 */
+        __u64 off;
+        __u32 size;
+};
+
+#endif /* _SPARC_JSFLASH_H */
diff --git a/arch/sparc/include/asm/kdebug.h b/arch/sparc/include/asm/kdebug.h
new file mode 100644
index 000000000000..8d12581ca386
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_KDEBUG_H
+#define ___ASM_SPARC_KDEBUG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/kdebug_64.h>
+#else
+#include <asm/kdebug_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/kdebug_32.h b/arch/sparc/include/asm/kdebug_32.h
new file mode 100644
index 000000000000..f69fe7d84b3c
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug_32.h
@@ -0,0 +1,73 @@
+/*
+ * kdebug.h:  Defines and definitions for debugging the Linux kernel
+ *            under various kernel debuggers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_KDEBUG_H
+#define _SPARC_KDEBUG_H
+
+#include <asm/openprom.h>
+#include <asm/vaddrs.h>
+
+/* Breakpoints are enter through trap table entry 126.  So in sparc assembly
+ * if you want to drop into the debugger you do:
+ *
+ * t DEBUG_BP_TRAP
+ */
+
+#define DEBUG_BP_TRAP     126
+
+#ifndef __ASSEMBLY__
+/* The debug vector is passed in %o1 at boot time.  It is a pointer to
+ * a structure in the debuggers address space.  Here is its format.
+ */
+
+typedef unsigned int (*debugger_funct)(void);
+
+struct kernel_debug {
+        /* First the entry point into the debugger.  You jump here
+         * to give control over to the debugger.
+         */
+        unsigned long kdebug_entry;
+        unsigned long kdebug_trapme;   /* Figure out later... */
+        /* The following is the number of pages that the debugger has
+         * taken from to total pool.
+         */
+        unsigned long *kdebug_stolen_pages;
+        /* Ok, after you remap yourself and/or change the trap table
+         * from what you were left with at boot time you have to call
+         * this synchronization function so the debugger can check out
+         * what you have done.
+         */
+        debugger_funct teach_debugger;
+}; /* I think that is it... */
+
+extern struct kernel_debug *linux_dbvec;
+
+/* Use this macro in C-code to enter the debugger. */
+static inline void sp_enter_debugger(void)
+{
+        __asm__ __volatile__("jmpl %0, %%o7\n\t"
+                             "nop\n\t" : :
+                             "r" (linux_dbvec) : "o7", "memory");
+}
+
+#define SP_ENTER_DEBUGGER do { \
+             if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \
+               sp_enter_debugger(); \
+                       } while(0)
+
+enum die_val {
+        DIE_UNUSED,
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Some nice offset defines for assembler code. */
+#define KDEBUG_ENTRY_OFF    0x0
+#define KDEBUG_DUNNO_OFF    0x4
+#define KDEBUG_DUNNO2_OFF   0x8
+#define KDEBUG_TEACH_OFF    0xc
+
+#endif /* !(_SPARC_KDEBUG_H) */
diff --git a/arch/sparc/include/asm/kdebug_64.h b/arch/sparc/include/asm/kdebug_64.h
new file mode 100644
index 000000000000..f905b773235a
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug_64.h
@@ -0,0 +1,19 @@
+#ifndef _SPARC64_KDEBUG_H
+#define _SPARC64_KDEBUG_H
+
+struct pt_regs;
+
+extern void bad_trap(struct pt_regs *, long);
+
+/* Grossly misnamed. */
+enum die_val {
+        DIE_OOPS = 1,
+        DIE_DEBUG,      /* ta 0x70 */
+        DIE_DEBUG_2,    /* ta 0x71 */
+        DIE_DIE,
+        DIE_TRAP,
+        DIE_TRAP_TL1,
+        DIE_CALL,
+};
+
+#endif
diff --git a/arch/sparc/include/asm/kgdb.h b/arch/sparc/include/asm/kgdb.h
new file mode 100644
index 000000000000..b6ef301d05bf
--- /dev/null
+++ b/arch/sparc/include/asm/kgdb.h
@@ -0,0 +1,38 @@
+#ifndef _SPARC_KGDB_H
+#define _SPARC_KGDB_H
+
+#ifdef CONFIG_SPARC32
+#define BUFMAX                  2048
+#else
+#define BUFMAX                  4096
+#endif
+
+enum regnames {
+        GDB_G0, GDB_G1, GDB_G2, GDB_G3, GDB_G4, GDB_G5, GDB_G6, GDB_G7,
+        GDB_O0, GDB_O1, GDB_O2, GDB_O3, GDB_O4, GDB_O5, GDB_SP, GDB_O7,
+        GDB_L0, GDB_L1, GDB_L2, GDB_L3, GDB_L4, GDB_L5, GDB_L6, GDB_L7,
+        GDB_I0, GDB_I1, GDB_I2, GDB_I3, GDB_I4, GDB_I5, GDB_FP, GDB_I7,
+        GDB_F0,
+        GDB_F31 = GDB_F0 + 31,
+#ifdef CONFIG_SPARC32
+        GDB_Y, GDB_PSR, GDB_WIM, GDB_TBR, GDB_PC, GDB_NPC,
+        GDB_FSR, GDB_CSR,
+#else
+        GDB_F32 = GDB_F0 + 32,
+        GDB_F62 = GDB_F32 + 15,
+        GDB_PC, GDB_NPC, GDB_STATE, GDB_FSR, GDB_FPRS, GDB_Y,
+#endif
+};
+
+#ifdef CONFIG_SPARC32
+#define NUMREGBYTES             ((GDB_CSR + 1) * 4)
+#else
+#define NUMREGBYTES             ((GDB_Y + 1) * 8)
+#endif
+
+extern void arch_kgdb_breakpoint(void);
+
+#define BREAK_INSTR_SIZE        4
+#define CACHE_FLUSH_IS_SAFE     1
+
+#endif /* _SPARC_KGDB_H */
diff --git a/arch/sparc/include/asm/kmap_types.h b/arch/sparc/include/asm/kmap_types.h
new file mode 100644
index 000000000000..602f5e034f7a
--- /dev/null
+++ b/arch/sparc/include/asm/kmap_types.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+/* Dummy header just to define km_type.  None of this
+ * is actually used on sparc.  -DaveM
+ */
+
+enum km_type {
+        KM_BOUNCE_READ,
+        KM_SKB_SUNRPC_DATA,
+        KM_SKB_DATA_SOFTIRQ,
+        KM_USER0,
+        KM_USER1,
+        KM_BIO_SRC_IRQ,
+        KM_BIO_DST_IRQ,
+        KM_PTE0,
+        KM_PTE1,
+        KM_IRQ0,
+        KM_IRQ1,
+        KM_SOFTIRQ0,
+        KM_SOFTIRQ1,
+        KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/sparc/include/asm/kprobes.h b/arch/sparc/include/asm/kprobes.h
new file mode 100644
index 000000000000..5879d71afdaa
--- /dev/null
+++ b/arch/sparc/include/asm/kprobes.h
@@ -0,0 +1,49 @@
+#ifndef _SPARC64_KPROBES_H
+#define _SPARC64_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/percpu.h>
+
+typedef u32 kprobe_opcode_t;
+
+#define BREAKPOINT_INSTRUCTION   0x91d02070 /* ta 0x70 */
+#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */
+#define MAX_INSN_SIZE 2
+
+#define kretprobe_blacklist_size 0
+
+#define arch_remove_kprobe(p)   do {} while (0)
+
+#define flush_insn_slot(p)              \
+do {    flushi(&(p)->ainsn.insn[0]);    \
+        flushi(&(p)->ainsn.insn[1]);    \
+} while (0)
+
+void kretprobe_trampoline(void);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+        /* copy of the original instruction */
+        kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+struct prev_kprobe {
+        struct kprobe *kp;
+        unsigned long status;
+        unsigned long orig_tnpc;
+        unsigned long orig_tstate_pil;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+        unsigned long kprobe_status;
+        unsigned long kprobe_orig_tnpc;
+        unsigned long kprobe_orig_tstate_pil;
+        struct pt_regs jprobe_saved_regs;
+        struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+                                    unsigned long val, void *data);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+#endif /* _SPARC64_KPROBES_H */
diff --git a/arch/sparc/include/asm/ldc.h b/arch/sparc/include/asm/ldc.h
new file mode 100644
index 000000000000..bdb524a7b814
--- /dev/null
+++ b/arch/sparc/include/asm/ldc.h
@@ -0,0 +1,138 @@
+#ifndef _SPARC64_LDC_H
+#define _SPARC64_LDC_H
+
+#include <asm/hypervisor.h>
+
+extern int ldom_domaining_enabled;
+extern void ldom_set_var(const char *var, const char *value);
+extern void ldom_reboot(const char *boot_command);
+extern void ldom_power_off(void);
+
+/* The event handler will be evoked when link state changes
+ * or data becomes available on the receive side.
+ *
+ * For non-RAW links, if the LDC_EVENT_RESET event arrives the
+ * driver should reset all of it's internal state and reinvoke
+ * ldc_connect() to try and bring the link up again.
+ *
+ * For RAW links, ldc_connect() is not used.  Instead the driver
+ * just waits for the LDC_EVENT_UP event.
+ */
+struct ldc_channel_config {
+        void (*event)(void *arg, int event);
+
+        u32                     mtu;
+        unsigned int            rx_irq;
+        unsigned int            tx_irq;
+        u8                      mode;
+#define LDC_MODE_RAW            0x00
+#define LDC_MODE_UNRELIABLE     0x01
+#define LDC_MODE_RESERVED       0x02
+#define LDC_MODE_STREAM         0x03
+
+        u8                      debug;
+#define LDC_DEBUG_HS            0x01
+#define LDC_DEBUG_STATE         0x02
+#define LDC_DEBUG_RX            0x04
+#define LDC_DEBUG_TX            0x08
+#define LDC_DEBUG_DATA          0x10
+};
+
+#define LDC_EVENT_RESET         0x01
+#define LDC_EVENT_UP            0x02
+#define LDC_EVENT_DATA_READY    0x04
+
+#define LDC_STATE_INVALID       0x00
+#define LDC_STATE_INIT          0x01
+#define LDC_STATE_BOUND         0x02
+#define LDC_STATE_READY         0x03
+#define LDC_STATE_CONNECTED     0x04
+
+struct ldc_channel;
+
+/* Allocate state for a channel.  */
+extern struct ldc_channel *ldc_alloc(unsigned long id,
+                                     const struct ldc_channel_config *cfgp,
+                                     void *event_arg);
+
+/* Shut down and free state for a channel.  */
+extern void ldc_free(struct ldc_channel *lp);
+
+/* Register TX and RX queues of the link with the hypervisor.  */
+extern int ldc_bind(struct ldc_channel *lp, const char *name);
+
+/* For non-RAW protocols we need to complete a handshake before
+ * communication can proceed.  ldc_connect() does that, if the
+ * handshake completes successfully, an LDC_EVENT_UP event will
+ * be sent up to the driver.
+ */
+extern int ldc_connect(struct ldc_channel *lp);
+extern int ldc_disconnect(struct ldc_channel *lp);
+
+extern int ldc_state(struct ldc_channel *lp);
+
+/* Read and write operations.  Only valid when the link is up.  */
+extern int ldc_write(struct ldc_channel *lp, const void *buf,
+                     unsigned int size);
+extern int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size);
+
+#define LDC_MAP_SHADOW  0x01
+#define LDC_MAP_DIRECT  0x02
+#define LDC_MAP_IO      0x04
+#define LDC_MAP_R       0x08
+#define LDC_MAP_W       0x10
+#define LDC_MAP_X       0x20
+#define LDC_MAP_RW      (LDC_MAP_R | LDC_MAP_W)
+#define LDC_MAP_RWX     (LDC_MAP_R | LDC_MAP_W | LDC_MAP_X)
+#define LDC_MAP_ALL     0x03f
+
+struct ldc_trans_cookie {
+        u64                     cookie_addr;
+        u64                     cookie_size;
+};
+
+struct scatterlist;
+extern int ldc_map_sg(struct ldc_channel *lp,
+                      struct scatterlist *sg, int num_sg,
+                      struct ldc_trans_cookie *cookies, int ncookies,
+                      unsigned int map_perm);
+
+extern int ldc_map_single(struct ldc_channel *lp,
+                          void *buf, unsigned int len,
+                          struct ldc_trans_cookie *cookies, int ncookies,
+                          unsigned int map_perm);
+
+extern void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies,
+                      int ncookies);
+
+extern int ldc_copy(struct ldc_channel *lp, int copy_dir,
+                    void *buf, unsigned int len, unsigned long offset,
+                    struct ldc_trans_cookie *cookies, int ncookies);
+
+static inline int ldc_get_dring_entry(struct ldc_channel *lp,
+                                      void *buf, unsigned int len,
+                                      unsigned long offset,
+                                      struct ldc_trans_cookie *cookies,
+                                      int ncookies)
+{
+        return ldc_copy(lp, LDC_COPY_IN, buf, len, offset, cookies, ncookies);
+}
+
+static inline int ldc_put_dring_entry(struct ldc_channel *lp,
+                                      void *buf, unsigned int len,
+                                      unsigned long offset,
+                                      struct ldc_trans_cookie *cookies,
+                                      int ncookies)
+{
+        return ldc_copy(lp, LDC_COPY_OUT, buf, len, offset, cookies, ncookies);
+}
+
+extern void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len,
+                                 struct ldc_trans_cookie *cookies,
+                                 int *ncookies, unsigned int map_perm);
+
+extern void ldc_free_exp_dring(struct ldc_channel *lp, void *buf,
+                               unsigned int len,
+                               struct ldc_trans_cookie *cookies, int ncookies);
+
+#endif /* _SPARC64_LDC_H */
diff --git a/arch/sparc/include/asm/linkage.h b/arch/sparc/include/asm/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/arch/sparc/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/arch/sparc/include/asm/lmb.h b/arch/sparc/include/asm/lmb.h
new file mode 100644
index 000000000000..6a352cbcf520
--- /dev/null
+++ b/arch/sparc/include/asm/lmb.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_LMB_H
+#define _SPARC64_LMB_H
+
+#include <asm/oplib.h>
+
+#define LMB_DBG(fmt...) prom_printf(fmt)
+
+#define LMB_REAL_LIMIT  0
+
+#endif /* !(_SPARC64_LMB_H) */
diff --git a/arch/sparc/include/asm/local.h b/arch/sparc/include/asm/local.h
new file mode 100644
index 000000000000..bc80815a435c
--- /dev/null
+++ b/arch/sparc/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_LOCAL_H
+#define _SPARC_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif
diff --git a/arch/sparc/include/asm/lsu.h b/arch/sparc/include/asm/lsu.h
new file mode 100644
index 000000000000..7190f8de90a0
--- /dev/null
+++ b/arch/sparc/include/asm/lsu.h
@@ -0,0 +1,19 @@
+#ifndef _SPARC64_LSU_H
+#define _SPARC64_LSU_H
+
+#include <linux/const.h>
+
+/* LSU Control Register */
+#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/
+#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/
+#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/
+#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/
+#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/
+#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/
+#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables.     */
+#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable.         */
+#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable.  */
+#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable.       */
+#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/
+
+#endif /* !(_SPARC64_LSU_H) */
diff --git a/arch/sparc/include/asm/machines.h b/arch/sparc/include/asm/machines.h
new file mode 100644
index 000000000000..c28c2f248794
--- /dev/null
+++ b/arch/sparc/include/asm/machines.h
@@ -0,0 +1,67 @@
+/*
+ * machines.h:  Defines for taking apart the machine type value in the
+ *              idprom and determining the kind of machine we are on.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_MACHINES_H
+#define _SPARC_MACHINES_H
+
+struct Sun_Machine_Models {
+        char *name;
+        unsigned char id_machtype;
+};
+
+/* Current number of machines we know about that has an IDPROM
+ * machtype entry including one entry for the 0x80 OBP machines.
+ */
+#define NUM_SUN_MACHINES   15
+
+/* The machine type in the idprom area looks like this:
+ *
+ * ---------------
+ * | ARCH | MACH |
+ * ---------------
+ *  7    4 3    0
+ *
+ * The ARCH field determines the architecture line (sun4, sun4c, etc).
+ * The MACH field determines the machine make within that architecture.
+ */
+
+#define SM_ARCH_MASK  0xf0
+#define SM_SUN4       0x20
+#define SM_SUN4C      0x50
+#define SM_SUN4M      0x70
+#define SM_SUN4M_OBP  0x80
+
+#define SM_TYP_MASK   0x0f
+/* Sun4 machines */
+#define SM_4_260      0x01    /* Sun 4/200 series */
+#define SM_4_110      0x02    /* Sun 4/100 series */
+#define SM_4_330      0x03    /* Sun 4/300 series */
+#define SM_4_470      0x04    /* Sun 4/400 series */
+
+/* Sun4c machines                Full Name              - PROM NAME */
+#define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
+#define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
+#define SM_4C_SS1PLUS 0x03    /* Sun4c SparcStation 1+  - Sun 4/65  */
+#define SM_4C_SLC     0x04    /* Sun4c SparcStation SLC - Sun 4/20  */
+#define SM_4C_SS2     0x05    /* Sun4c SparcStation 2   - Sun 4/75  */
+#define SM_4C_ELC     0x06    /* Sun4c SparcStation ELC - Sun 4/25  */
+#define SM_4C_IPX     0x07    /* Sun4c SparcStation IPX - Sun 4/50  */
+
+/* Sun4m machines, these predate the OpenBoot.  These values only mean
+ * something if the value in the ARCH field is SM_SUN4M, if it is
+ * SM_SUN4M_OBP then you have the following situation:
+ * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
+ * 2) You have to consult OpenBoot to determine which machine this is.
+ */
+#define SM_4M_SS60    0x01    /* Sun4m SparcSystem 600                  */
+#define SM_4M_SS50    0x02    /* Sun4m SparcStation 10                  */
+#define SM_4M_SS40    0x03    /* Sun4m SparcStation 5                   */
+
+/* Sun4d machines -- N/A */
+/* Sun4e machines -- N/A */
+/* Sun4u machines -- N/A */
+
+#endif /* !(_SPARC_MACHINES_H) */
diff --git a/arch/sparc/include/asm/mbus.h b/arch/sparc/include/asm/mbus.h
new file mode 100644
index 000000000000..69f07a022ee6
--- /dev/null
+++ b/arch/sparc/include/asm/mbus.h
@@ -0,0 +1,100 @@
+/*
+ * mbus.h:  Various defines for MBUS modules.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MBUS_H
+#define _SPARC_MBUS_H
+
+#include <asm/ross.h>    /* HyperSparc stuff */
+#include <asm/cypress.h> /* Cypress Chips */
+#include <asm/viking.h>  /* Ugh, bug city... */
+
+enum mbus_module {
+        HyperSparc        = 0,
+        Cypress           = 1,
+        Cypress_vE        = 2,
+        Cypress_vD        = 3,
+        Swift_ok          = 4,
+        Swift_bad_c       = 5,
+        Swift_lots_o_bugs = 6,
+        Tsunami           = 7,
+        Viking_12         = 8,
+        Viking_2x         = 9,
+        Viking_30         = 10,
+        Viking_35         = 11,
+        Viking_new        = 12,
+        TurboSparc        = 13,
+        SRMMU_INVAL_MOD   = 14,
+};
+
+extern enum mbus_module srmmu_modtype;
+extern unsigned int viking_rev, swift_rev, cypress_rev;
+
+/* HW Mbus module bugs we have to deal with */
+#define HWBUG_COPYBACK_BROKEN        0x00000001
+#define HWBUG_ASIFLUSH_BROKEN        0x00000002
+#define HWBUG_VACFLUSH_BITROT        0x00000004
+#define HWBUG_KERN_ACCBROKEN         0x00000008
+#define HWBUG_KERN_CBITBROKEN        0x00000010
+#define HWBUG_MODIFIED_BITROT        0x00000020
+#define HWBUG_PC_BADFAULT_ADDR       0x00000040
+#define HWBUG_SUPERSCALAR_BAD        0x00000080
+#define HWBUG_PACINIT_BITROT         0x00000100
+
+/* First the module type values. To find out which you have, just load
+ * the mmu control register from ASI_M_MMUREG alternate address space and
+ * shift the value right 28 bits.
+ */
+/* IMPL field means the company which produced the chip. */
+#define MBUS_VIKING        0x4   /* bleech, Texas Instruments Module */
+#define MBUS_LSI           0x3   /* LSI Logics */
+#define MBUS_ROSS          0x1   /* Ross is nice */
+#define MBUS_FMI           0x0   /* Fujitsu Microelectronics/Swift */
+
+/* Ross Module versions */
+#define ROSS_604_REV_CDE        0x0   /* revisions c, d, and e */
+#define ROSS_604_REV_F          0x1   /* revision f */
+#define ROSS_605                0xf   /* revision a, a.1, and a.2 */
+#define ROSS_605_REV_B          0xe   /* revision b */
+
+/* TI Viking Module versions */
+#define VIKING_REV_12           0x1   /* Version 1.2 or SPARCclassic's CPU */
+#define VIKING_REV_2            0x2   /* Version 2.1, 2.2, 2.3, and 2.4 */
+#define VIKING_REV_30           0x3   /* Version 3.0 */
+#define VIKING_REV_35           0x4   /* Version 3.5 */
+
+/* LSI Logics. */
+#define LSI_L64815              0x0
+
+/* Fujitsu */
+#define FMI_AURORA              0x4   /* MB8690x, a Swift module... */
+#define FMI_TURBO               0x5   /* MB86907, a TurboSparc module... */
+
+/* For multiprocessor support we need to be able to obtain the CPU id and
+ * the MBUS Module id.
+ */
+
+/* The CPU ID is encoded in the trap base register, 20 bits to the left of
+ * bit zero, with 2 bits being significant.
+ */
+#define TBR_ID_SHIFT            20
+
+static inline int get_cpuid(void)
+{
+        register int retval;
+        __asm__ __volatile__("rd %%tbr, %0\n\t"
+                             "srl %0, %1, %0\n\t" :
+                             "=r" (retval) :
+                             "i" (TBR_ID_SHIFT));
+        return (retval & 3);
+}
+
+static inline int get_modid(void)
+{
+        return (get_cpuid() | 0x8);
+}
+
+        
+#endif /* !(_SPARC_MBUS_H) */
diff --git a/arch/sparc/include/asm/mc146818rtc.h b/arch/sparc/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..67ed9e3a0235
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MC146818RTC_H
+#define ___ASM_SPARC_MC146818RTC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mc146818rtc_64.h>
+#else
+#include <asm/mc146818rtc_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mc146818rtc_32.h b/arch/sparc/include/asm/mc146818rtc_32.h
new file mode 100644
index 000000000000..fa7eac926582
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc_32.h
@@ -0,0 +1,29 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC_MC146818RTC_H
+#define __ASM_SPARC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)     (0x70 + (x))
+#define RTC_ALWAYS_BCD  1       /* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC_MC146818RTC_H */
diff --git a/arch/sparc/include/asm/mc146818rtc_64.h b/arch/sparc/include/asm/mc146818rtc_64.h
new file mode 100644
index 000000000000..e9c0fcc25c6f
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc_64.h
@@ -0,0 +1,34 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC64_MC146818RTC_H
+#define __ASM_SPARC64_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#ifdef CONFIG_PCI
+extern unsigned long ds1287_regs;
+#else
+#define ds1287_regs (0UL)
+#endif
+#define RTC_PORT(x)     (ds1287_regs + (x))
+#define RTC_ALWAYS_BCD  0
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC64_MC146818RTC_H */
diff --git a/arch/sparc/include/asm/mdesc.h b/arch/sparc/include/asm/mdesc.h
new file mode 100644
index 000000000000..1acc7272e537
--- /dev/null
+++ b/arch/sparc/include/asm/mdesc.h
@@ -0,0 +1,78 @@
+#ifndef _SPARC64_MDESC_H
+#define _SPARC64_MDESC_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/prom.h>
+
+struct mdesc_handle;
+
+/* Machine description operations are to be surrounded by grab and
+ * release calls.  The mdesc_handle returned from the grab is
+ * the first argument to all of the operational calls that work
+ * on mdescs.
+ */
+extern struct mdesc_handle *mdesc_grab(void);
+extern void mdesc_release(struct mdesc_handle *);
+
+#define MDESC_NODE_NULL         (~(u64)0)
+
+extern u64 mdesc_node_by_name(struct mdesc_handle *handle,
+                              u64 from_node, const char *name);
+#define mdesc_for_each_node_by_name(__hdl, __node, __name) \
+        for (__node = mdesc_node_by_name(__hdl, MDESC_NODE_NULL, __name); \
+             (__node) != MDESC_NODE_NULL; \
+             __node = mdesc_node_by_name(__hdl, __node, __name))
+
+/* Access to property values returned from mdesc_get_property() are
+ * only valid inside of a mdesc_grab()/mdesc_release() sequence.
+ * Once mdesc_release() is called, the memory backed up by these
+ * pointers may reference freed up memory.
+ *
+ * Therefore callers must make copies of any property values
+ * they need.
+ *
+ * These same rules apply to mdesc_node_name().
+ */
+extern const void *mdesc_get_property(struct mdesc_handle *handle,
+                                      u64 node, const char *name, int *lenp);
+extern const char *mdesc_node_name(struct mdesc_handle *hp, u64 node);
+
+/* MD arc iteration, the standard sequence is:
+ *
+ *      unsigned long arc;
+ *      mdesc_for_each_arc(arc, handle, node, MDESC_ARC_TYPE_{FWD,BACK}) {
+ *              unsigned long target = mdesc_arc_target(handle, arc);
+ *              ...
+ *      }
+ */
+
+#define MDESC_ARC_TYPE_FWD      "fwd"
+#define MDESC_ARC_TYPE_BACK     "back"
+
+extern u64 mdesc_next_arc(struct mdesc_handle *handle, u64 from,
+                          const char *arc_type);
+#define mdesc_for_each_arc(__arc, __hdl, __node, __type) \
+        for (__arc = mdesc_next_arc(__hdl, __node, __type); \
+             (__arc) != MDESC_NODE_NULL; \
+             __arc = mdesc_next_arc(__hdl, __arc, __type))
+
+extern u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc);
+
+extern void mdesc_update(void);
+
+struct mdesc_notifier_client {
+        void (*add)(struct mdesc_handle *handle, u64 node);
+        void (*remove)(struct mdesc_handle *handle, u64 node);
+
+        const char                      *node_name;
+        struct mdesc_notifier_client    *next;
+};
+
+extern void mdesc_register_notifier(struct mdesc_notifier_client *client);
+
+extern void mdesc_fill_in_cpu_data(cpumask_t mask);
+
+extern void sun4v_mdesc_init(void);
+
+#endif
diff --git a/arch/sparc/include/asm/memreg.h b/arch/sparc/include/asm/memreg.h
new file mode 100644
index 000000000000..845ad2b39183
--- /dev/null
+++ b/arch/sparc/include/asm/memreg.h
@@ -0,0 +1,51 @@
+#ifndef _SPARC_MEMREG_H
+#define _SPARC_MEMREG_H
+/* memreg.h:  Definitions of the values found in the synchronous
+ *            and asynchronous memory error registers when a fault
+ *            occurs on the sun4c.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* First the synchronous error codes, these are usually just
+ * normal page faults.
+ */
+
+#define SUN4C_SYNC_WDRESET   0x0001  /* watchdog reset */
+#define SUN4C_SYNC_SIZE      0x0002  /* bad access size? whuz this? */
+#define SUN4C_SYNC_PARITY    0x0008  /* bad ram chips caused a parity error */
+#define SUN4C_SYNC_SBUS      0x0010  /* the SBUS had some problems... */
+#define SUN4C_SYNC_NOMEM     0x0020  /* translation to non-existent ram */
+#define SUN4C_SYNC_PROT      0x0040  /* access violated pte protections */
+#define SUN4C_SYNC_NPRESENT  0x0080  /* pte said that page was not present */
+#define SUN4C_SYNC_BADWRITE  0x8000  /* while writing something went bogus */
+
+#define SUN4C_SYNC_BOLIXED  \
+        (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
+         SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
+
+/* Now the asynchronous error codes, these are almost always produced
+ * by the cache writing things back to memory and getting a bad translation.
+ * Bad DVMA transactions can cause these faults too.
+ */
+
+#define SUN4C_ASYNC_BADDVMA 0x0010  /* error during DVMA access */
+#define SUN4C_ASYNC_NOMEM   0x0020  /* write back pointed to bad phys addr */
+#define SUN4C_ASYNC_BADWB   0x0080  /* write back points to non-present page */
+
+/* Memory parity error register with associated bit constants. */
+#ifndef __ASSEMBLY__
+extern __volatile__ unsigned long __iomem *sun4c_memerr_reg;
+#endif
+
+#define SUN4C_MPE_ERROR 0x80    /* Parity error detected. (ro) */
+#define SUN4C_MPE_MULTI 0x40    /* Multiple parity errors detected. (ro) */
+#define SUN4C_MPE_TEST  0x20    /* Write inverse parity. (rw) */
+#define SUN4C_MPE_CHECK 0x10    /* Enable parity checking. (rw) */
+#define SUN4C_MPE_ERR00 0x08    /* Parity error in bits 0-7. (ro) */
+#define SUN4C_MPE_ERR08 0x04    /* Parity error in bits 8-15. (ro) */
+#define SUN4C_MPE_ERR16 0x02    /* Parity error in bits 16-23. (ro) */
+#define SUN4C_MPE_ERR24 0x01    /* Parity error in bits 24-31. (ro) */
+#define SUN4C_MPE_ERRS  0x0F    /* Bit mask for the error bits. (ro) */
+
+#endif /* !(_SPARC_MEMREG_H) */
diff --git a/arch/sparc/include/asm/mman.h b/arch/sparc/include/asm/mman.h
new file mode 100644
index 000000000000..fdfbbf0a4736
--- /dev/null
+++ b/arch/sparc/include/asm/mman.h
@@ -0,0 +1,31 @@
+#ifndef __SPARC_MMAN_H__
+#define __SPARC_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+/* SunOS'ified... */
+
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_INHERIT     0x80            /* SunOS doesn't do this, but... */
+#define MAP_LOCKED      0x100           /* lock the mapping */
+#define _MAP_NEW        0x80000000      /* Binary compatibility is fun... */
+
+#define MAP_GROWSDOWN   0x0200          /* stack-like segment */
+#define MAP_DENYWRITE   0x0800          /* ETXTBSY */
+#define MAP_EXECUTABLE  0x1000          /* mark it as an executable */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE    0x8000          /* populate (prefault) pagetables */
+#define MAP_NONBLOCK    0x10000         /* do not block on IO */
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define arch_mmap_check(addr,len,flags) sparc_mmap_check(addr,len)
+int sparc_mmap_check(unsigned long addr, unsigned long len);
+#endif
+#endif
+
+#endif /* __SPARC_MMAN_H__ */
diff --git a/arch/sparc/include/asm/mmu.h b/arch/sparc/include/asm/mmu.h
new file mode 100644
index 000000000000..88fa313887db
--- /dev/null
+++ b/arch/sparc/include/asm/mmu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_H
+#define ___ASM_SPARC_MMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_64.h>
+#else
+#include <asm/mmu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mmu_32.h b/arch/sparc/include/asm/mmu_32.h
new file mode 100644
index 000000000000..ccd36d26615a
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_32.h
@@ -0,0 +1,7 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/arch/sparc/include/asm/mmu_64.h b/arch/sparc/include/asm/mmu_64.h
new file mode 100644
index 000000000000..9067dc500535
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_64.h
@@ -0,0 +1,123 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+#include <linux/const.h>
+#include <asm/page.h>
+#include <asm/hypervisor.h>
+
+#define CTX_NR_BITS             13
+
+#define TAG_CONTEXT_BITS        ((_AC(1,UL) << CTX_NR_BITS) - _AC(1,UL))
+
+/* UltraSPARC-III+ and later have a feature whereby you can
+ * select what page size the various Data-TLB instances in the
+ * chip.  In order to gracefully support this, we put the version
+ * field in a spot outside of the areas of the context register
+ * where this parameter is specified.
+ */
+#define CTX_VERSION_SHIFT       22
+#define CTX_VERSION_MASK        ((~0UL) << CTX_VERSION_SHIFT)
+
+#define CTX_PGSZ_8KB            _AC(0x0,UL)
+#define CTX_PGSZ_64KB           _AC(0x1,UL)
+#define CTX_PGSZ_512KB          _AC(0x2,UL)
+#define CTX_PGSZ_4MB            _AC(0x3,UL)
+#define CTX_PGSZ_BITS           _AC(0x7,UL)
+#define CTX_PGSZ0_NUC_SHIFT     61
+#define CTX_PGSZ1_NUC_SHIFT     58
+#define CTX_PGSZ0_SHIFT         16
+#define CTX_PGSZ1_SHIFT         19
+#define CTX_PGSZ_MASK           ((CTX_PGSZ_BITS << CTX_PGSZ0_SHIFT) | \
+                                 (CTX_PGSZ_BITS << CTX_PGSZ1_SHIFT))
+
+#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
+#define CTX_PGSZ_BASE   CTX_PGSZ_8KB
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
+#define CTX_PGSZ_BASE   CTX_PGSZ_64KB
+#else
+#error No page size specified in kernel configuration
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define CTX_PGSZ_HUGE           CTX_PGSZ_4MB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define CTX_PGSZ_HUGE           CTX_PGSZ_512KB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define CTX_PGSZ_HUGE           CTX_PGSZ_64KB
+#endif
+
+#define CTX_PGSZ_KERN   CTX_PGSZ_4MB
+
+/* Thus, when running on UltraSPARC-III+ and later, we use the following
+ * PRIMARY_CONTEXT register values for the kernel context.
+ */
+#define CTX_CHEETAH_PLUS_NUC \
+        ((CTX_PGSZ_KERN << CTX_PGSZ0_NUC_SHIFT) | \
+         (CTX_PGSZ_BASE << CTX_PGSZ1_NUC_SHIFT))
+
+#define CTX_CHEETAH_PLUS_CTX0 \
+        ((CTX_PGSZ_KERN << CTX_PGSZ0_SHIFT) | \
+         (CTX_PGSZ_BASE << CTX_PGSZ1_SHIFT))
+
+/* If you want "the TLB context number" use CTX_NR_MASK.  If you
+ * want "the bits I program into the context registers" use
+ * CTX_HW_MASK.
+ */
+#define CTX_NR_MASK             TAG_CONTEXT_BITS
+#define CTX_HW_MASK             (CTX_NR_MASK | CTX_PGSZ_MASK)
+
+#define CTX_FIRST_VERSION       ((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL))
+#define CTX_VALID(__ctx)        \
+         (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK))
+#define CTX_HWBITS(__ctx)       ((__ctx.sparc64_ctx_val) & CTX_HW_MASK)
+#define CTX_NRBITS(__ctx)       ((__ctx.sparc64_ctx_val) & CTX_NR_MASK)
+
+#ifndef __ASSEMBLY__
+
+#define TSB_ENTRY_ALIGNMENT     16
+
+struct tsb {
+        unsigned long tag;
+        unsigned long pte;
+} __attribute__((aligned(TSB_ENTRY_ALIGNMENT)));
+
+extern void __tsb_insert(unsigned long ent, unsigned long tag, unsigned long pte);
+extern void tsb_flush(unsigned long ent, unsigned long tag);
+extern void tsb_init(struct tsb *tsb, unsigned long size);
+
+struct tsb_config {
+        struct tsb              *tsb;
+        unsigned long           tsb_rss_limit;
+        unsigned long           tsb_nentries;
+        unsigned long           tsb_reg_val;
+        unsigned long           tsb_map_vaddr;
+        unsigned long           tsb_map_pte;
+};
+
+#define MM_TSB_BASE     0
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define MM_TSB_HUGE     1
+#define MM_NUM_TSBS     2
+#else
+#define MM_NUM_TSBS     1
+#endif
+
+typedef struct {
+        spinlock_t              lock;
+        unsigned long           sparc64_ctx_val;
+        unsigned long           huge_pte_count;
+        struct tsb_config       tsb_block[MM_NUM_TSBS];
+        struct hv_tsb_descr     tsb_descr[MM_NUM_TSBS];
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#define TSB_CONFIG_TSB          0x00
+#define TSB_CONFIG_RSS_LIMIT    0x08
+#define TSB_CONFIG_NENTRIES     0x10
+#define TSB_CONFIG_REG_VAL      0x18
+#define TSB_CONFIG_MAP_VADDR    0x20
+#define TSB_CONFIG_MAP_PTE      0x28
+
+#endif /* __MMU_H */
diff --git a/arch/sparc/include/asm/mmu_context.h b/arch/sparc/include/asm/mmu_context.h
new file mode 100644
index 000000000000..5531346c64f9
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_CONTEXT_H
+#define ___ASM_SPARC_MMU_CONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_context_64.h>
+#else
+#include <asm/mmu_context_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mmu_context_32.h b/arch/sparc/include/asm/mmu_context_32.h
new file mode 100644
index 000000000000..671a997b9e69
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context_32.h
@@ -0,0 +1,42 @@
+#ifndef __SPARC_MMU_CONTEXT_H
+#define __SPARC_MMU_CONTEXT_H
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * Initialize a new mmu context.  This is invoked when a new
+ * address space instance (unique or shared) is instantiated.
+ */
+#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * Destroy a dead context.  This occurs when mmput drops the
+ * mm_users count to zero, the mmaps have been released, and
+ * all the page tables have been flushed.  Our job is to destroy
+ * any remaining processor-specific state.
+ */
+BTFIXUPDEF_CALL(void, destroy_context, struct mm_struct *)
+
+#define destroy_context(mm) BTFIXUP_CALL(destroy_context)(mm)
+
+/* Switch the current MM context. */
+BTFIXUPDEF_CALL(void, switch_mm, struct mm_struct *, struct mm_struct *, struct task_struct *)
+
+#define switch_mm(old_mm, mm, tsk) BTFIXUP_CALL(switch_mm)(old_mm, mm, tsk)
+
+#define deactivate_mm(tsk,mm)   do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+#define activate_mm(active_mm, mm) switch_mm((active_mm), (mm), NULL)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_MMU_CONTEXT_H) */
diff --git a/arch/sparc/include/asm/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h
new file mode 100644
index 000000000000..5693ab482606
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context_64.h
@@ -0,0 +1,155 @@
+#ifndef __SPARC64_MMU_CONTEXT_H
+#define __SPARC64_MMU_CONTEXT_H
+
+/* Derived heavily from Linus's Alpha/AXP ASN code... */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/spitfire.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+extern spinlock_t ctx_alloc_lock;
+extern unsigned long tlb_context_cache;
+extern unsigned long mmu_context_bmap[];
+
+extern void get_new_mmu_context(struct mm_struct *mm);
+#ifdef CONFIG_SMP
+extern void smp_new_mmu_context_version(void);
+#else
+#define smp_new_mmu_context_version() do { } while (0)
+#endif
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+
+extern void __tsb_context_switch(unsigned long pgd_pa,
+                                 struct tsb_config *tsb_base,
+                                 struct tsb_config *tsb_huge,
+                                 unsigned long tsb_descr_pa);
+
+static inline void tsb_context_switch(struct mm_struct *mm)
+{
+        __tsb_context_switch(__pa(mm->pgd),
+                             &mm->context.tsb_block[0],
+#ifdef CONFIG_HUGETLB_PAGE
+                             (mm->context.tsb_block[1].tsb ?
+                              &mm->context.tsb_block[1] :
+                              NULL)
+#else
+                             NULL
+#endif
+                             , __pa(&mm->context.tsb_descr[0]));
+}
+
+extern void tsb_grow(struct mm_struct *mm, unsigned long tsb_index, unsigned long mm_rss);
+#ifdef CONFIG_SMP
+extern void smp_tsb_sync(struct mm_struct *mm);
+#else
+#define smp_tsb_sync(__mm) do { } while (0)
+#endif
+
+/* Set MMU context in the actual hardware. */
+#define load_secondary_context(__mm) \
+        __asm__ __volatile__( \
+        "\n661: stxa            %0, [%1] %2\n" \
+        "       .section        .sun4v_1insn_patch, \"ax\"\n" \
+        "       .word           661b\n" \
+        "       stxa            %0, [%1] %3\n" \
+        "       .previous\n" \
+        "       flush           %%g6\n" \
+        : /* No outputs */ \
+        : "r" (CTX_HWBITS((__mm)->context)), \
+          "r" (SECONDARY_CONTEXT), "i" (ASI_DMMU), "i" (ASI_MMU))
+
+extern void __flush_tlb_mm(unsigned long, unsigned long);
+
+/* Switch the current MM context.  Interrupts are disabled.  */
+static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk)
+{
+        unsigned long ctx_valid, flags;
+        int cpu;
+
+        if (unlikely(mm == &init_mm))
+                return;
+
+        spin_lock_irqsave(&mm->context.lock, flags);
+        ctx_valid = CTX_VALID(mm->context);
+        if (!ctx_valid)
+                get_new_mmu_context(mm);
+
+        /* We have to be extremely careful here or else we will miss
+         * a TSB grow if we switch back and forth between a kernel
+         * thread and an address space which has it's TSB size increased
+         * on another processor.
+         *
+         * It is possible to play some games in order to optimize the
+         * switch, but the safest thing to do is to unconditionally
+         * perform the secondary context load and the TSB context switch.
+         *
+         * For reference the bad case is, for address space "A":
+         *
+         *              CPU 0                   CPU 1
+         *      run address space A
+         *      set cpu0's bits in cpu_vm_mask
+         *      switch to kernel thread, borrow
+         *      address space A via entry_lazy_tlb
+         *                                      run address space A
+         *                                      set cpu1's bit in cpu_vm_mask
+         *                                      flush_tlb_pending()
+         *                                      reset cpu_vm_mask to just cpu1
+         *                                      TSB grow
+         *      run address space A
+         *      context was valid, so skip
+         *      TSB context switch
+         *
+         * At that point cpu0 continues to use a stale TSB, the one from
+         * before the TSB grow performed on cpu1.  cpu1 did not cross-call
+         * cpu0 to update it's TSB because at that point the cpu_vm_mask
+         * only had cpu1 set in it.
+         */
+        load_secondary_context(mm);
+        tsb_context_switch(mm);
+
+        /* Any time a processor runs a context on an address space
+         * for the first time, we must flush that context out of the
+         * local TLB.
+         */
+        cpu = smp_processor_id();
+        if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) {
+                cpu_set(cpu, mm->cpu_vm_mask);
+                __flush_tlb_mm(CTX_HWBITS(mm->context),
+                               SECONDARY_CONTEXT);
+        }
+        spin_unlock_irqrestore(&mm->context.lock, flags);
+}
+
+#define deactivate_mm(tsk,mm)   do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm)
+{
+        unsigned long flags;
+        int cpu;
+
+        spin_lock_irqsave(&mm->context.lock, flags);
+        if (!CTX_VALID(mm->context))
+                get_new_mmu_context(mm);
+        cpu = smp_processor_id();
+        if (!cpu_isset(cpu, mm->cpu_vm_mask))
+                cpu_set(cpu, mm->cpu_vm_mask);
+
+        load_secondary_context(mm);
+        __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT);
+        tsb_context_switch(mm);
+        spin_unlock_irqrestore(&mm->context.lock, flags);
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_MMU_CONTEXT_H) */
diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h
new file mode 100644
index 000000000000..ebf5986c12ed
--- /dev/null
+++ b/arch/sparc/include/asm/mmzone.h
@@ -0,0 +1,17 @@
+#ifndef _SPARC64_MMZONE_H
+#define _SPARC64_MMZONE_H
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+
+extern struct pglist_data *node_data[];
+
+#define NODE_DATA(nid)          (node_data[nid])
+#define node_start_pfn(nid)     (NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)       (NODE_DATA(nid)->node_end_pfn)
+
+extern int numa_cpu_lookup_table[];
+extern cpumask_t numa_cpumask_lookup_table[];
+
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#endif /* _SPARC64_MMZONE_H */
diff --git a/arch/sparc/include/asm/module.h b/arch/sparc/include/asm/module.h
new file mode 100644
index 000000000000..e82cf9a3e60e
--- /dev/null
+++ b/arch/sparc/include/asm/module.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MODULE_H
+#define ___ASM_SPARC_MODULE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/module_64.h>
+#else
+#include <asm/module_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/module_32.h b/arch/sparc/include/asm/module_32.h
new file mode 100644
index 000000000000..cbd9e67b0c0b
--- /dev/null
+++ b/arch/sparc/include/asm/module_32.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC_MODULE_H
+#define _ASM_SPARC_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif /* _ASM_SPARC_MODULE_H */
diff --git a/arch/sparc/include/asm/module_64.h b/arch/sparc/include/asm/module_64.h
new file mode 100644
index 000000000000..3d77ba465783
--- /dev/null
+++ b/arch/sparc/include/asm/module_64.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC64_MODULE_H
+#define _ASM_SPARC64_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#endif /* _ASM_SPARC64_MODULE_H */
diff --git a/arch/sparc/include/asm/mostek.h b/arch/sparc/include/asm/mostek.h
new file mode 100644
index 000000000000..433be3e0a69b
--- /dev/null
+++ b/arch/sparc/include/asm/mostek.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MOSTEK_H
+#define ___ASM_SPARC_MOSTEK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mostek_64.h>
+#else
+#include <asm/mostek_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mostek_32.h b/arch/sparc/include/asm/mostek_32.h
new file mode 100644
index 000000000000..a99590c4c507
--- /dev/null
+++ b/arch/sparc/include/asm/mostek_32.h
@@ -0,0 +1,171 @@
+/*
+ * mostek.h:  Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca)
+ */
+
+#ifndef _SPARC_MOSTEK_H
+#define _SPARC_MOSTEK_H
+
+#include <asm/idprom.h>
+#include <asm/io.h>
+
+/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ *                             Data
+ * Address                                                 Function
+ *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ *   7ff  -     -     -     -    -     -     -     -       Year 00-99
+ *   7fe  0     0     0     -    -     -     -     -      Month 01-12
+ *   7fd  0     0     -     -    -     -     -     -       Date 01-31
+ *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
+ *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
+ *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
+ *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
+ *   7f8  W     R     S     -    -     -     -     -    Control
+ *
+ *   * ST is STOP BIT
+ *   * W is WRITE BIT
+ *   * R is READ BIT
+ *   * S is SIGN BIT
+ *   * FT is FREQ TEST BIT
+ *   * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ */
+#define mostek_read(_addr)              readb(_addr)
+#define mostek_write(_addr,_val)        writeb(_val, _addr)
+#define MOSTEK_EEPROM           0x0000UL
+#define MOSTEK_IDPROM           0x07d8UL
+#define MOSTEK_CREG             0x07f8UL
+#define MOSTEK_SEC              0x07f9UL
+#define MOSTEK_MIN              0x07faUL
+#define MOSTEK_HOUR             0x07fbUL
+#define MOSTEK_DOW              0x07fcUL
+#define MOSTEK_DOM              0x07fdUL
+#define MOSTEK_MONTH            0x07feUL
+#define MOSTEK_YEAR             0x07ffUL
+
+struct mostek48t02 {
+        volatile char eeprom[2008];     /* This is the eeprom, don't touch! */
+        struct idprom idprom;           /* The idprom lives here. */
+        volatile unsigned char creg;    /* Control register */
+        volatile unsigned char sec;     /* Seconds (0-59) */
+        volatile unsigned char min;     /* Minutes (0-59) */
+        volatile unsigned char hour;    /* Hour (0-23) */
+        volatile unsigned char dow;     /* Day of the week (1-7) */
+        volatile unsigned char dom;     /* Day of the month (1-31) */
+        volatile unsigned char month;   /* Month of year (1-12) */
+        volatile unsigned char year;    /* Year (0-99) */
+};
+
+extern spinlock_t mostek_lock;
+extern void __iomem *mstk48t02_regs;
+
+/* Control register values. */
+#define MSTK_CREG_WRITE 0x80    /* Must set this before placing values. */
+#define MSTK_CREG_READ  0x40    /* Stop updates to allow a clean read. */
+#define MSTK_CREG_SIGN  0x20    /* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define MSTK_STOP       0x80    /* Stop the clock oscillator. (sec) */
+#define MSTK_KICK_START 0x80    /* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST  0x40    /* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define MSTK_SEC_MASK   0x7f
+#define MSTK_MIN_MASK   0x7f
+#define MSTK_HOUR_MASK  0x3f
+#define MSTK_DOW_MASK   0x07
+#define MSTK_DOM_MASK   0x3f
+#define MSTK_MONTH_MASK 0x1f
+#define MSTK_YEAR_MASK  0xffU
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK))
+#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define MSTK_REG_CREG(regs)     (((struct mostek48t02 *)regs)->creg)
+#define MSTK_REG_SEC(regs)      MSTK_GET(regs,sec,SEC)
+#define MSTK_REG_MIN(regs)      MSTK_GET(regs,min,MIN)
+#define MSTK_REG_HOUR(regs)     MSTK_GET(regs,hour,HOUR)
+#define MSTK_REG_DOW(regs)      MSTK_GET(regs,dow,DOW)
+#define MSTK_REG_DOM(regs)      MSTK_GET(regs,dom,DOM)
+#define MSTK_REG_MONTH(regs)    MSTK_GET(regs,month,MONTH)
+#define MSTK_REG_YEAR(regs)     MSTK_GET(regs,year,YEAR)
+
+#define MSTK_SET_REG_SEC(regs,value)    MSTK_SET(regs,sec,value,SEC)
+#define MSTK_SET_REG_MIN(regs,value)    MSTK_SET(regs,min,value,MIN)
+#define MSTK_SET_REG_HOUR(regs,value)   MSTK_SET(regs,hour,value,HOUR)
+#define MSTK_SET_REG_DOW(regs,value)    MSTK_SET(regs,dow,value,DOW)
+#define MSTK_SET_REG_DOM(regs,value)    MSTK_SET(regs,dom,value,DOM)
+#define MSTK_SET_REG_MONTH(regs,value)  MSTK_SET(regs,month,value,MONTH)
+#define MSTK_SET_REG_YEAR(regs,value)   MSTK_SET(regs,year,value,YEAR)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+struct mostek48t08 {
+        char offset[6*1024];         /* Magic things may be here, who knows? */
+        struct mostek48t02 regs;     /* Here is what we are interested in.   */
+};
+
+#ifdef CONFIG_SUN4
+enum sparc_clock_type { MSTK48T02, MSTK48T08, \
+INTERSIL, MSTK_INVALID };
+#else
+enum sparc_clock_type { MSTK48T02, MSTK48T08, \
+MSTK_INVALID };
+#endif
+
+#ifdef CONFIG_SUN4
+/* intersil on a sun 4/260 code  data from harris doc */
+struct intersil_dt {
+        volatile unsigned char int_csec;
+        volatile unsigned char int_hour;
+        volatile unsigned char int_min;
+        volatile unsigned char int_sec;
+        volatile unsigned char int_month;
+        volatile unsigned char int_day;
+        volatile unsigned char int_year;
+        volatile unsigned char int_dow;
+};
+
+struct intersil {
+        struct intersil_dt clk;
+        struct intersil_dt cmp;
+        volatile unsigned char int_intr_reg;
+        volatile unsigned char int_cmd_reg;
+};
+
+#define INTERSIL_STOP        0x0
+#define INTERSIL_START       0x8
+#define INTERSIL_INTR_DISABLE   0x0
+#define INTERSIL_INTR_ENABLE   0x10
+#define INTERSIL_32K            0x0
+#define INTERSIL_NORMAL         0x0
+#define INTERSIL_24H            0x4
+#define INTERSIL_INT_100HZ      0x2
+
+/* end of intersil info */
+#endif
+
+#endif /* !(_SPARC_MOSTEK_H) */
diff --git a/arch/sparc/include/asm/mostek_64.h b/arch/sparc/include/asm/mostek_64.h
new file mode 100644
index 000000000000..c5652de2ace2
--- /dev/null
+++ b/arch/sparc/include/asm/mostek_64.h
@@ -0,0 +1,143 @@
+/* mostek.h:  Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _SPARC64_MOSTEK_H
+#define _SPARC64_MOSTEK_H
+
+#include <asm/idprom.h>
+
+/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ *                             Data
+ * Address                                                 Function
+ *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ *   7ff  -     -     -     -    -     -     -     -       Year 00-99
+ *   7fe  0     0     0     -    -     -     -     -      Month 01-12
+ *   7fd  0     0     -     -    -     -     -     -       Date 01-31
+ *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
+ *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
+ *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
+ *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
+ *   7f8  W     R     S     -    -     -     -     -    Control
+ *
+ *   * ST is STOP BIT
+ *   * W is WRITE BIT
+ *   * R is READ BIT
+ *   * S is SIGN BIT
+ *   * FT is FREQ TEST BIT
+ *   * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ *
+ * We now deal with physical addresses for I/O to the chip. -DaveM
+ */
+static inline u8 mostek_read(void __iomem *addr)
+{
+        u8 ret;
+
+        __asm__ __volatile__("lduba     [%1] %2, %0"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+        return ret;
+}
+
+static inline void mostek_write(void __iomem *addr, u8 val)
+{
+        __asm__ __volatile__("stba      %0, [%1] %2"
+                             : /* no outputs */
+                             : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define MOSTEK_EEPROM           0x0000UL
+#define MOSTEK_IDPROM           0x07d8UL
+#define MOSTEK_CREG             0x07f8UL
+#define MOSTEK_SEC              0x07f9UL
+#define MOSTEK_MIN              0x07faUL
+#define MOSTEK_HOUR             0x07fbUL
+#define MOSTEK_DOW              0x07fcUL
+#define MOSTEK_DOM              0x07fdUL
+#define MOSTEK_MONTH            0x07feUL
+#define MOSTEK_YEAR             0x07ffUL
+
+extern spinlock_t mostek_lock;
+extern void __iomem *mstk48t02_regs;
+
+/* Control register values. */
+#define MSTK_CREG_WRITE 0x80    /* Must set this before placing values. */
+#define MSTK_CREG_READ  0x40    /* Stop updates to allow a clean read. */
+#define MSTK_CREG_SIGN  0x20    /* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define MSTK_STOP       0x80    /* Stop the clock oscillator. (sec) */
+#define MSTK_KICK_START 0x80    /* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST  0x40    /* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define MSTK_SEC_MASK   0x7f
+#define MSTK_MIN_MASK   0x7f
+#define MSTK_HOUR_MASK  0x3f
+#define MSTK_DOW_MASK   0x07
+#define MSTK_DOM_MASK   0x3f
+#define MSTK_MONTH_MASK 0x1f
+#define MSTK_YEAR_MASK  0xffU
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,name)     \
+        (MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK))
+#define MSTK_SET(regs,name,value) \
+do {    u8 __val = mostek_read(regs + MOSTEK_ ## name); \
+        __val &= ~(MSTK_ ## name ## _MASK); \
+        __val |= (MSTK_DECIMAL_TO_REGVAL(value) & \
+                  (MSTK_ ## name ## _MASK)); \
+        mostek_write(regs + MOSTEK_ ## name, __val); \
+} while(0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define MSTK_REG_CREG(regs)     (mostek_read((regs) + MOSTEK_CREG))
+#define MSTK_REG_SEC(regs)      MSTK_GET(regs,SEC)
+#define MSTK_REG_MIN(regs)      MSTK_GET(regs,MIN)
+#define MSTK_REG_HOUR(regs)     MSTK_GET(regs,HOUR)
+#define MSTK_REG_DOW(regs)      MSTK_GET(regs,DOW)
+#define MSTK_REG_DOM(regs)      MSTK_GET(regs,DOM)
+#define MSTK_REG_MONTH(regs)    MSTK_GET(regs,MONTH)
+#define MSTK_REG_YEAR(regs)     MSTK_GET(regs,YEAR)
+
+#define MSTK_SET_REG_SEC(regs,value)    MSTK_SET(regs,SEC,value)
+#define MSTK_SET_REG_MIN(regs,value)    MSTK_SET(regs,MIN,value)
+#define MSTK_SET_REG_HOUR(regs,value)   MSTK_SET(regs,HOUR,value)
+#define MSTK_SET_REG_DOW(regs,value)    MSTK_SET(regs,DOW,value)
+#define MSTK_SET_REG_DOM(regs,value)    MSTK_SET(regs,DOM,value)
+#define MSTK_SET_REG_MONTH(regs,value)  MSTK_SET(regs,MONTH,value)
+#define MSTK_SET_REG_YEAR(regs,value)   MSTK_SET(regs,YEAR,value)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+#define MOSTEK_48T08_OFFSET     0x0000UL        /* Lower NVRAM portions */
+#define MOSTEK_48T08_48T02      0x1800UL        /* Offset to 48T02 chip */
+
+/* SUN5 systems usually have 48t59 model clock chipsets.  But we keep the older
+ * clock chip definitions around just in case.
+ */
+#define MOSTEK_48T59_OFFSET     0x0000UL        /* Lower NVRAM portions */
+#define MOSTEK_48T59_48T02      0x1800UL        /* Offset to 48T02 chip */
+
+#endif /* !(_SPARC64_MOSTEK_H) */
diff --git a/arch/sparc/include/asm/mpmbox.h b/arch/sparc/include/asm/mpmbox.h
new file mode 100644
index 000000000000..f8423039b242
--- /dev/null
+++ b/arch/sparc/include/asm/mpmbox.h
@@ -0,0 +1,67 @@
+/*
+ * mpmbox.h:  Interface and defines for the OpenProm mailbox
+ *               facilities for MP machines under Linux.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MPMBOX_H
+#define _SPARC_MPMBOX_H
+
+/* The prom allocates, for each CPU on the machine an unsigned
+ * byte in physical ram.  You probe the device tree prom nodes
+ * for these values.  The purpose of this byte is to be able to
+ * pass messages from one cpu to another.
+ */
+
+/* These are the main message types we have to look for in our
+ * Cpu mailboxes, based upon these values we decide what course
+ * of action to take.
+ */
+
+/* The CPU is executing code in the kernel. */
+#define MAILBOX_ISRUNNING     0xf0
+
+/* Another CPU called romvec->pv_exit(), you should call
+ * prom_stopcpu() when you see this in your mailbox.
+ */
+#define MAILBOX_EXIT          0xfb
+
+/* Another CPU called romvec->pv_enter(), you should call
+ * prom_cpuidle() when this is seen.
+ */
+#define MAILBOX_GOSPIN        0xfc
+
+/* Another CPU has hit a breakpoint either into kadb or the prom
+ * itself.  Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
+ * at this point.
+ */
+#define MAILBOX_BPT_SPIN      0xfd
+
+/* Oh geese, some other nitwit got a damn watchdog reset.  The party's
+ * over so go call prom_stopcpu().
+ */
+#define MAILBOX_WDOG_STOP     0xfe
+
+#ifndef __ASSEMBLY__
+
+/* Handy macro's to determine a cpu's state. */
+
+/* Is the cpu still in Power On Self Test? */
+#define MBOX_POST_P(letter)  ((letter) >= 0x00 && (letter) <= 0x7f)
+
+/* Is the cpu at the 'ok' prompt of the PROM? */
+#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
+
+/* Is the cpu spinning in the PROM? */
+#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
+
+/* Sanity check... This is junk mail, throw it out. */
+#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
+
+/* Is the cpu actively running an application/kernel-code? */
+#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_MPMBOX_H) */
diff --git a/arch/sparc/include/asm/msgbuf.h b/arch/sparc/include/asm/msgbuf.h
new file mode 100644
index 000000000000..efc7cbe9788f
--- /dev/null
+++ b/arch/sparc/include/asm/msgbuf.h
@@ -0,0 +1,38 @@
+#ifndef _SPARC_MSGBUF_H
+#define _SPARC_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+
+struct msqid64_ds {
+        struct ipc64_perm msg_perm;
+        PADDING(__pad1)
+        __kernel_time_t msg_stime;      /* last msgsnd time */
+        PADDING(__pad2)
+        __kernel_time_t msg_rtime;      /* last msgrcv time */
+        PADDING(__pad3)
+        __kernel_time_t msg_ctime;      /* last change time */
+        unsigned long  msg_cbytes;      /* current number of bytes on queue */
+        unsigned long  msg_qnum;        /* number of messages in queue */
+        unsigned long  msg_qbytes;      /* max number of bytes on queue */
+        __kernel_pid_t msg_lspid;       /* pid of last msgsnd */
+        __kernel_pid_t msg_lrpid;       /* last receive pid */
+        unsigned long  __unused1;
+        unsigned long  __unused2;
+};
+#undef PADDING
+#endif /* _SPARC_MSGBUF_H */
diff --git a/arch/sparc/include/asm/msi.h b/arch/sparc/include/asm/msi.h
new file mode 100644
index 000000000000..724ca5667052
--- /dev/null
+++ b/arch/sparc/include/asm/msi.h
@@ -0,0 +1,31 @@
+/*
+ * msi.h:  Defines specific to the MBus - Sbus - Interface.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_MSI_H
+#define _SPARC_MSI_H
+
+/*
+ * Locations of MSI Registers.
+ */
+#define MSI_MBUS_ARBEN  0xe0001008      /* MBus Arbiter Enable register */
+
+/*
+ * Useful bits in the MSI Registers.
+ */
+#define MSI_ASYNC_MODE  0x80000000      /* Operate the MSI asynchronously */
+
+
+static inline void msi_set_sync(void)
+{
+        __asm__ __volatile__ ("lda [%0] %1, %%g3\n\t"
+                              "andn %%g3, %2, %%g3\n\t"
+                              "sta %%g3, [%0] %1\n\t" : :
+                              "r" (MSI_MBUS_ARBEN),
+                              "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3");
+}
+
+#endif /* !(_SPARC_MSI_H) */
diff --git a/arch/sparc/include/asm/mutex.h b/arch/sparc/include/asm/mutex.h
new file mode 100644
index 000000000000..458c1f7fbc18
--- /dev/null
+++ b/arch/sparc/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/sparc/include/asm/mxcc.h b/arch/sparc/include/asm/mxcc.h
new file mode 100644
index 000000000000..c0517bd05bde
--- /dev/null
+++ b/arch/sparc/include/asm/mxcc.h
@@ -0,0 +1,137 @@
+/*
+ * mxcc.h:  Definitions of the Viking MXCC registers
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MXCC_H
+#define _SPARC_MXCC_H
+
+/* These registers are accessed through ASI 0x2. */
+#define MXCC_DATSTREAM       0x1C00000  /* Data stream register */
+#define MXCC_SRCSTREAM       0x1C00100  /* Source stream register */
+#define MXCC_DESSTREAM       0x1C00200  /* Destination stream register */
+#define MXCC_RMCOUNT         0x1C00300  /* Count of references and misses */
+#define MXCC_STEST           0x1C00804  /* Internal self-test */
+#define MXCC_CREG            0x1C00A04  /* Control register */
+#define MXCC_SREG            0x1C00B00  /* Status register */
+#define MXCC_RREG            0x1C00C04  /* Reset register */
+#define MXCC_EREG            0x1C00E00  /* Error code register */
+#define MXCC_PREG            0x1C00F04  /* Address port register */
+
+/* Some MXCC constants. */
+#define MXCC_STREAM_SIZE     0x20       /* Size in bytes of one stream r/w */
+
+/* The MXCC Control Register:
+ *
+ * ----------------------------------------------------------------------
+ * |                                   | RRC | RSV |PRE|MCE|PARE|ECE|RSV|
+ * ----------------------------------------------------------------------
+ *  31                              10    9    8-6   5   4    3   2  1-0
+ *
+ * RRC: Controls what you read from MXCC_RMCOUNT reg.
+ *      0=Misses 1=References
+ * PRE: Prefetch enable
+ * MCE: Multiple Command Enable
+ * PARE: Parity enable
+ * ECE: External cache enable
+ */
+
+#define MXCC_CTL_RRC   0x00000200
+#define MXCC_CTL_PRE   0x00000020
+#define MXCC_CTL_MCE   0x00000010
+#define MXCC_CTL_PARE  0x00000008
+#define MXCC_CTL_ECE   0x00000004
+
+/* The MXCC Error Register:
+ *
+ * --------------------------------------------------------
+ * |ME| RSV|CE|PEW|PEE|ASE|EIV| MOPC|ECODE|PRIV|RSV|HPADDR|
+ * --------------------------------------------------------
+ *  31   30 29  28  27  26  25 24-15  14-7   6  5-3   2-0
+ *
+ * ME: Multiple Errors have occurred
+ * CE: Cache consistency Error
+ * PEW: Parity Error during a Write operation
+ * PEE: Parity Error involving the External cache
+ * ASE: ASynchronous Error
+ * EIV: This register is toast
+ * MOPC: MXCC Operation Code for instance causing error
+ * ECODE: The Error CODE
+ * PRIV: A privileged mode error? 0=no 1=yes
+ * HPADDR: High PhysicalADDRess bits (35-32)
+ */
+
+#define MXCC_ERR_ME     0x80000000
+#define MXCC_ERR_CE     0x20000000
+#define MXCC_ERR_PEW    0x10000000
+#define MXCC_ERR_PEE    0x08000000
+#define MXCC_ERR_ASE    0x04000000
+#define MXCC_ERR_EIV    0x02000000
+#define MXCC_ERR_MOPC   0x01FF8000
+#define MXCC_ERR_ECODE  0x00007F80
+#define MXCC_ERR_PRIV   0x00000040
+#define MXCC_ERR_HPADDR 0x0000000f
+
+/* The MXCC Port register:
+ *
+ * -----------------------------------------------------
+ * |                | MID |                            |
+ * -----------------------------------------------------
+ *  31            21 20-18 17                         0
+ *
+ * MID: The moduleID of the cpu your read this from.
+ */
+
+#ifndef __ASSEMBLY__
+
+static inline void mxcc_set_stream_src(unsigned long *paddr)
+{
+        unsigned long data0 = paddr[0];
+        unsigned long data1 = paddr[1];
+
+        __asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+                              "or %%g0, %1, %%g3\n\t"
+                              "stda %%g2, [%2] %3\n\t" : :
+                              "r" (data0), "r" (data1),
+                              "r" (MXCC_SRCSTREAM),
+                              "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+static inline void mxcc_set_stream_dst(unsigned long *paddr)
+{
+        unsigned long data0 = paddr[0];
+        unsigned long data1 = paddr[1];
+
+        __asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+                              "or %%g0, %1, %%g3\n\t"
+                              "stda %%g2, [%2] %3\n\t" : :
+                              "r" (data0), "r" (data1),
+                              "r" (MXCC_DESSTREAM),
+                              "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+static inline unsigned long mxcc_get_creg(void)
+{
+        unsigned long mxcc_control;
+
+        __asm__ __volatile__("set 0xffffffff, %%g2\n\t"
+                             "set 0xffffffff, %%g3\n\t"
+                             "stda %%g2, [%1] %2\n\t"
+                             "lda [%3] %2, %0\n\t" :
+                             "=r" (mxcc_control) :
+                             "r" (MXCC_EREG), "i" (ASI_M_MXCC),
+                             "r" (MXCC_CREG) : "g2", "g3");
+        return mxcc_control;
+}
+
+static inline void mxcc_set_creg(unsigned long mxcc_control)
+{
+        __asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+                             "r" (mxcc_control), "r" (MXCC_CREG),
+                             "i" (ASI_M_MXCC));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_MXCC_H) */
diff --git a/arch/sparc/include/asm/ns87303.h b/arch/sparc/include/asm/ns87303.h
new file mode 100644
index 000000000000..686defe6aaa0
--- /dev/null
+++ b/arch/sparc/include/asm/ns87303.h
@@ -0,0 +1,118 @@
+/* ns87303.h: Configuration Register Description for the
+ *            National Semiconductor PC87303 (SuperIO).
+ *
+ * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_NS87303_H
+#define _SPARC_NS87303_H 1
+
+/*
+ * Control Register Index Values
+ */
+#define FER     0x00
+#define FAR     0x01
+#define PTR     0x02
+#define FCR     0x03
+#define PCR     0x04
+#define KRR     0x05
+#define PMC     0x06
+#define TUP     0x07
+#define SID     0x08
+#define ASC     0x09
+#define CS0CF0  0x0a
+#define CS0CF1  0x0b
+#define CS1CF0  0x0c
+#define CS1CF1  0x0d
+
+/* Function Enable Register (FER) bits */
+#define FER_EDM         0x10    /* Encoded Drive and Motor pin information   */
+
+/* Function Address Register (FAR) bits */
+#define FAR_LPT_MASK    0x03
+#define FAR_LPTB        0x00
+#define FAR_LPTA        0x01
+#define FAR_LPTC        0x02
+
+/* Power and Test Register (PTR) bits */
+#define PTR_LPTB_IRQ7   0x08
+#define PTR_LEVEL_IRQ   0x80    /* When not ECP/EPP: Use level IRQ           */
+#define PTR_LPT_REG_DIR 0x80    /* When ECP/EPP: LPT CTR controlls direction */
+                                /*               of the parallel port        */
+
+/* Function Control Register (FCR) bits */
+#define FCR_LDE         0x10    /* Logical Drive Exchange                    */
+#define FCR_ZWS_ENA     0x20    /* Enable short host read/write in ECP/EPP   */
+
+/* Printer Control Register (PCR) bits */
+#define PCR_EPP_ENABLE  0x01
+#define PCR_EPP_IEEE    0x02    /* Enable EPP Version 1.9 (IEEE 1284)        */
+#define PCR_ECP_ENABLE  0x04
+#define PCR_ECP_CLK_ENA 0x08    /* If 0 ECP Clock is stopped on Power down   */
+#define PCR_IRQ_POLAR   0x20    /* If 0 IRQ is level high or negative pulse, */
+                                /* if 1 polarity is inverted                 */
+#define PCR_IRQ_ODRAIN  0x40    /* If 1, IRQ is open drain                   */
+
+/* Tape UARTs and Parallel Port Config Register (TUP) bits */
+#define TUP_EPP_TIMO    0x02    /* Enable EPP timeout IRQ                    */
+
+/* Advanced SuperIO Config Register (ASC) bits */
+#define ASC_LPT_IRQ7    0x01    /* Always use IRQ7 for LPT                  */
+#define ASC_DRV2_SEL    0x02    /* Logical Drive Exchange controlled by TDR  */
+
+#define FER_RESERVED    0x00
+#define FAR_RESERVED    0x00
+#define PTR_RESERVED    0x73
+#define FCR_RESERVED    0xc4
+#define PCR_RESERVED    0x10
+#define KRR_RESERVED    0x00
+#define PMC_RESERVED    0x98
+#define TUP_RESERVED    0xfb
+#define SIP_RESERVED    0x00
+#define ASC_RESERVED    0x18
+#define CS0CF0_RESERVED 0x00
+#define CS0CF1_RESERVED 0x08
+#define CS1CF0_RESERVED 0x00
+#define CS1CF1_RESERVED 0x08
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+extern spinlock_t ns87303_lock;
+
+static inline int ns87303_modify(unsigned long port, unsigned int index,
+                                     unsigned char clr, unsigned char set)
+{
+        static unsigned char reserved[] = {
+                FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
+                PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
+                SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
+                CS1CF0_RESERVED, CS1CF1_RESERVED
+        };
+        unsigned long flags;
+        unsigned char value;
+
+        if (index > 0x0d)
+                return -EINVAL;
+
+        spin_lock_irqsave(&ns87303_lock, flags);
+
+        outb(index, port);
+        value = inb(port + 1);
+        value &= ~(reserved[index] | clr);
+        value |= set;
+        outb(value, port + 1);
+        outb(value, port + 1);
+
+        spin_unlock_irqrestore(&ns87303_lock, flags);
+
+        return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_SPARC_NS87303_H) */
diff --git a/arch/sparc/include/asm/obio.h b/arch/sparc/include/asm/obio.h
new file mode 100644
index 000000000000..1a7544ceb574
--- /dev/null
+++ b/arch/sparc/include/asm/obio.h
@@ -0,0 +1,249 @@
+/*
+ * obio.h:  Some useful locations in 0xFXXXXXXXX PA obio space on sun4d.
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_OBIO_H
+#define _SPARC_OBIO_H
+
+#include <asm/asi.h>
+
+/* This weird monster likes to use the very upper parts of
+   36bit PA for these things :) */
+   
+/* CSR space (for each XDBUS)
+ *  ------------------------------------------------------------------------
+ *  |   0xFE  |   DEVID    |                | XDBUS ID |                   |
+ *  ------------------------------------------------------------------------
+ *  35      28 27        20 19            10 9        8 7                 0
+ */
+   
+#define CSR_BASE_ADDR           0xe0000000
+#define CSR_CPU_SHIFT           (32 - 4 - 5)
+#define CSR_XDBUS_SHIFT         8
+
+#define CSR_BASE(cpu) (((CSR_BASE_ADDR >> CSR_CPU_SHIFT) + cpu) << CSR_CPU_SHIFT)
+
+/* ECSR space (not for each XDBUS)
+ *  ------------------------------------------------------------------------
+ *  |   0xF  | DEVID[7:1] |                                                |
+ *  ------------------------------------------------------------------------
+ *  35     32 31        25 24                                             0
+ */
+   
+#define ECSR_BASE_ADDR          0x00000000
+#define ECSR_CPU_SHIFT          (32 - 5)
+#define ECSR_DEV_SHIFT          (32 - 8)
+
+#define ECSR_BASE(cpu) ((cpu) << ECSR_CPU_SHIFT)
+#define ECSR_DEV_BASE(devid) ((devid) << ECSR_DEV_SHIFT) 
+
+/* Bus Watcher */
+#define BW_LOCAL_BASE           0xfff00000
+
+#define BW_CID                  0x00000000
+#define BW_DBUS_CTRL            0x00000008
+#define BW_DBUS_DATA            0x00000010
+#define BW_CTRL                 0x00001000
+#define BW_INTR_TABLE           0x00001040
+#define BW_INTR_TABLE_CLEAR     0x00001080
+#define BW_PRESCALER            0x000010c0
+#define BW_PTIMER_LIMIT         0x00002000
+#define BW_PTIMER_COUNTER2      0x00002004
+#define BW_PTIMER_NDLIMIT       0x00002008
+#define BW_PTIMER_CTRL          0x0000200c
+#define BW_PTIMER_COUNTER       0x00002010
+#define BW_TIMER_LIMIT          0x00003000
+#define BW_TIMER_COUNTER2       0x00003004
+#define BW_TIMER_NDLIMIT        0x00003008
+#define BW_TIMER_CTRL           0x0000300c
+#define BW_TIMER_COUNTER        0x00003010
+
+/* BW Control */
+#define BW_CTRL_USER_TIMER      0x00000004      /* Is User Timer Free run enabled */
+
+/* Boot Bus */
+#define BB_LOCAL_BASE           0xf0000000
+
+#define BB_STAT1                0x00100000
+#define BB_STAT2                0x00120000
+#define BB_STAT3                0x00140000
+#define BB_LEDS                 0x002e0000
+
+/* Bits in BB_STAT2 */
+#define BB_STAT2_AC_INTR        0x04    /* Aiee! 5ms and power is gone... */
+#define BB_STAT2_TMP_INTR       0x10    /* My Penguins are burning. Are you able to smell it? */
+#define BB_STAT2_FAN_INTR       0x20    /* My fan refuses to work */
+#define BB_STAT2_PWR_INTR       0x40    /* On SC2000, one of the two ACs died. Ok, we go on... */
+#define BB_STAT2_MASK           (BB_STAT2_AC_INTR|BB_STAT2_TMP_INTR|BB_STAT2_FAN_INTR|BB_STAT2_PWR_INTR)
+
+/* Cache Controller */
+#define CC_BASE         0x1F00000
+#define CC_DATSTREAM    0x1F00000  /* Data stream register */
+#define CC_DATSIZE      0x1F0003F  /* Size */
+#define CC_SRCSTREAM    0x1F00100  /* Source stream register */
+#define CC_DESSTREAM    0x1F00200  /* Destination stream register */
+#define CC_RMCOUNT      0x1F00300  /* Count of references and misses */
+#define CC_IPEN         0x1F00406  /* Pending Interrupts */
+#define CC_IMSK         0x1F00506  /* Interrupt Mask */
+#define CC_ICLR         0x1F00606  /* Clear pending Interrupts */
+#define CC_IGEN         0x1F00704  /* Generate Interrupt register */
+#define CC_STEST        0x1F00804  /* Internal self-test */
+#define CC_CREG         0x1F00A04  /* Control register */
+#define CC_SREG         0x1F00B00  /* Status register */
+#define CC_RREG         0x1F00C04  /* Reset register */
+#define CC_EREG         0x1F00E00  /* Error code register */
+#define CC_CID          0x1F00F04  /* Component ID */
+
+#ifndef __ASSEMBLY__
+
+static inline int bw_get_intr_mask(int sbus_level)
+{
+        int mask;
+        
+        __asm__ __volatile__ ("lduha [%1] %2, %0" :
+                              "=r" (mask) :
+                              "r" (BW_LOCAL_BASE + BW_INTR_TABLE + (sbus_level << 3)),
+                              "i" (ASI_M_CTL));
+        return mask;
+}
+
+static inline void bw_clear_intr_mask(int sbus_level, int mask)
+{
+        __asm__ __volatile__ ("stha %0, [%1] %2" : :
+                              "r" (mask),
+                              "r" (BW_LOCAL_BASE + BW_INTR_TABLE_CLEAR + (sbus_level << 3)),
+                              "i" (ASI_M_CTL));
+}
+
+static inline unsigned bw_get_prof_limit(int cpu)
+{
+        unsigned limit;
+        
+        __asm__ __volatile__ ("lda [%1] %2, %0" :
+                              "=r" (limit) :
+                              "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+                              "i" (ASI_M_CTL));
+        return limit;
+}
+
+static inline void bw_set_prof_limit(int cpu, unsigned limit)
+{
+        __asm__ __volatile__ ("sta %0, [%1] %2" : :
+                              "r" (limit),
+                              "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+                              "i" (ASI_M_CTL));
+}
+
+static inline unsigned bw_get_ctrl(int cpu)
+{
+        unsigned ctrl;
+        
+        __asm__ __volatile__ ("lda [%1] %2, %0" :
+                              "=r" (ctrl) :
+                              "r" (CSR_BASE(cpu) + BW_CTRL),
+                              "i" (ASI_M_CTL));
+        return ctrl;
+}
+
+static inline void bw_set_ctrl(int cpu, unsigned ctrl)
+{
+        __asm__ __volatile__ ("sta %0, [%1] %2" : :
+                              "r" (ctrl),
+                              "r" (CSR_BASE(cpu) + BW_CTRL),
+                              "i" (ASI_M_CTL));
+}
+
+extern unsigned char cpu_leds[32];
+
+static inline void show_leds(int cpuid)
+{
+        cpuid &= 0x1e;
+        __asm__ __volatile__ ("stba %0, [%1] %2" : :
+                              "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
+                              "r" (ECSR_BASE(cpuid) | BB_LEDS),
+                              "i" (ASI_M_CTL));
+}
+
+static inline unsigned cc_get_ipen(void)
+{
+        unsigned pending;
+        
+        __asm__ __volatile__ ("lduha [%1] %2, %0" :
+                              "=r" (pending) :
+                              "r" (CC_IPEN),
+                              "i" (ASI_M_MXCC));
+        return pending;
+}
+
+static inline void cc_set_iclr(unsigned clear)
+{
+        __asm__ __volatile__ ("stha %0, [%1] %2" : :
+                              "r" (clear),
+                              "r" (CC_ICLR),
+                              "i" (ASI_M_MXCC));
+}
+
+static inline unsigned cc_get_imsk(void)
+{
+        unsigned mask;
+        
+        __asm__ __volatile__ ("lduha [%1] %2, %0" :
+                              "=r" (mask) :
+                              "r" (CC_IMSK),
+                              "i" (ASI_M_MXCC));
+        return mask;
+}
+
+static inline void cc_set_imsk(unsigned mask)
+{
+        __asm__ __volatile__ ("stha %0, [%1] %2" : :
+                              "r" (mask),
+                              "r" (CC_IMSK),
+                              "i" (ASI_M_MXCC));
+}
+
+static inline unsigned cc_get_imsk_other(int cpuid)
+{
+        unsigned mask;
+        
+        __asm__ __volatile__ ("lduha [%1] %2, %0" :
+                              "=r" (mask) :
+                              "r" (ECSR_BASE(cpuid) | CC_IMSK),
+                              "i" (ASI_M_CTL));
+        return mask;
+}
+
+static inline void cc_set_imsk_other(int cpuid, unsigned mask)
+{
+        __asm__ __volatile__ ("stha %0, [%1] %2" : :
+                              "r" (mask),
+                              "r" (ECSR_BASE(cpuid) | CC_IMSK),
+                              "i" (ASI_M_CTL));
+}
+
+static inline void cc_set_igen(unsigned gen)
+{
+        __asm__ __volatile__ ("sta %0, [%1] %2" : :
+                              "r" (gen),
+                              "r" (CC_IGEN),
+                              "i" (ASI_M_MXCC));
+}
+
+/* +-------+-------------+-----------+------------------------------------+
+ * | bcast |  devid      |   sid     |              levels mask           |
+ * +-------+-------------+-----------+------------------------------------+
+ *  31      30         23 22       15 14                                 0
+ */
+#define IGEN_MESSAGE(bcast, devid, sid, levels) \
+        (((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels))
+            
+static inline void sun4d_send_ipi(int cpu, int level)
+{
+        cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1)));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_OBIO_H) */
diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h
new file mode 100644
index 000000000000..e5f5aedc2293
--- /dev/null
+++ b/arch/sparc/include/asm/of_device.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_SPARC_OF_DEVICE_H
+#define _ASM_SPARC_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <asm/openprom.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device
+{
+        struct device_node              *node;
+        struct device                   dev;
+        struct resource                 resource[PROMREG_MAX];
+        unsigned int                    irqs[PROMINTR_MAX];
+        int                             num_irqs;
+
+        void                            *sysdata;
+
+        int                             slot;
+        int                             portid;
+        int                             clock_freq;
+};
+
+extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
+extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
+
+/* These are just here during the transition */
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SPARC_OF_DEVICE_H */
diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h
new file mode 100644
index 000000000000..aa699775ffba
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OF_PLATFORM_H
+#define ___ASM_SPARC_OF_PLATFORM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/of_platform_64.h>
+#else
+#include <asm/of_platform_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/of_platform_32.h b/arch/sparc/include/asm/of_platform_32.h
new file mode 100644
index 000000000000..723f7c9b7411
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform_32.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_SPARC_OF_PLATFORM_H
+#define _ASM_SPARC_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                       <benh@kernel.crashing.org>
+ *    Modified for Sparc by merging parts of asm/of_device.h
+ *              by Stephen Rothwell
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+extern struct bus_type ebus_bus_type;
+extern struct bus_type sbus_bus_type;
+
+#define of_bus_type     of_platform_bus_type    /* for compatibility */
+
+#endif  /* _ASM_SPARC_OF_PLATFORM_H */
diff --git a/arch/sparc/include/asm/of_platform_64.h b/arch/sparc/include/asm/of_platform_64.h
new file mode 100644
index 000000000000..4f66a5f6342d
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform_64.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SPARC64_OF_PLATFORM_H
+#define _ASM_SPARC64_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                       <benh@kernel.crashing.org>
+ *    Modified for Sparc by merging parts of asm/of_device.h
+ *              by Stephen Rothwell
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+extern struct bus_type isa_bus_type;
+extern struct bus_type ebus_bus_type;
+extern struct bus_type sbus_bus_type;
+
+#define of_bus_type     of_platform_bus_type    /* for compatibility */
+
+#endif  /* _ASM_SPARC64_OF_PLATFORM_H */
diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h
new file mode 100644
index 000000000000..aaeae905ed3f
--- /dev/null
+++ b/arch/sparc/include/asm/openprom.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPENPROM_H
+#define ___ASM_SPARC_OPENPROM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/openprom_64.h>
+#else
+#include <asm/openprom_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/openprom_32.h b/arch/sparc/include/asm/openprom_32.h
new file mode 100644
index 000000000000..8b1649f29ed9
--- /dev/null
+++ b/arch/sparc/include/asm/openprom_32.h
@@ -0,0 +1,255 @@
+#ifndef __SPARC_OPENPROM_H
+#define __SPARC_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* Empirical constants... */
+#define LINUX_OPPROM_MAGIC      0x10010407
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+        int (*v0_devopen)(char *device_str);
+        int (*v0_devclose)(int dev_desc);
+        int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+        int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+        int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+        int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+        int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+        int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+        int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+        int (*v2_inst2pkg)(int d);      /* Convert ihandle to phandle */
+        char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+        void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+        /* To map devices into virtual I/O space. */
+        char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+        void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+        int (*v2_dev_open)(char *devpath);
+        void (*v2_dev_close)(int d);
+        int (*v2_dev_read)(int d, char *buf, int nbytes);
+        int (*v2_dev_write)(int d, char *buf, int nbytes);
+        int (*v2_dev_seek)(int d, int hi, int lo);
+
+        /* Never issued (multistage load support) */
+        void (*v2_wheee2)(void);
+        void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+        struct linux_mlist_v0 *theres_more;
+        char *start_adr;
+        unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+        struct linux_mlist_v0 **v0_totphys;
+        struct linux_mlist_v0 **v0_prommap;
+        struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+        char *argv[8];
+        char args[100];
+        char boot_dev[2];
+        int boot_dev_ctrl;
+        int boot_dev_unit;
+        int dev_partition;
+        char *kernel_file_name;
+        void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+        char **bootpath;
+        char **bootargs;
+        int *fd_stdin;
+        int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+        /* Version numbers. */
+        unsigned int pv_magic_cookie;
+        unsigned int pv_romvers;
+        unsigned int pv_plugin_revision;
+        unsigned int pv_printrev;
+
+        /* Version 0 memory descriptors. */
+        struct linux_mem_v0 pv_v0mem;
+
+        /* Node operations. */
+        struct linux_nodeops *pv_nodeops;
+
+        char **pv_bootstr;
+        struct linux_dev_v0_funcs pv_v0devops;
+
+        char *pv_stdin;
+        char *pv_stdout;
+#define PROMDEV_KBD     0               /* input from keyboard */
+#define PROMDEV_SCREEN  0               /* output to screen */
+#define PROMDEV_TTYA    1               /* in/out to ttya */
+#define PROMDEV_TTYB    2               /* in/out to ttyb */
+
+        /* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+        int (*pv_getchar)(void);
+        void (*pv_putchar)(int ch);
+
+        /* Non-blocking variants. */
+        int (*pv_nbgetchar)(void);
+        int (*pv_nbputchar)(int ch);
+
+        void (*pv_putstr)(char *str, int len);
+
+        /* Miscellany. */
+        void (*pv_reboot)(char *bootstr);
+        void (*pv_printf)(__const__ char *fmt, ...);
+        void (*pv_abort)(void);
+        __volatile__ int *pv_ticks;
+        void (*pv_halt)(void);
+        void (**pv_synchook)(void);
+
+        /* Evaluate a forth string, not different proto for V0 and V2->up. */
+        union {
+                void (*v0_eval)(int len, char *str);
+                void (*v2_eval)(char *str);
+        } pv_fortheval;
+
+        struct linux_arguments_v0 **pv_v0bootargs;
+
+        /* Get ether address. */
+        unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+        struct linux_bootargs_v2 pv_v2bootargs;
+        struct linux_dev_v2_funcs pv_v2devops;
+
+        int filler[15];
+
+        /* This one is sun4c/sun4 only. */
+        void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+        /* Prom version 3 Multiprocessor routines. This stuff is crazy.
+         * No joke. Calling these when there is only one cpu probably
+         * crashes the machine, have to test this. :-)
+         */
+
+        /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+         * 'thiscontext' executing at address 'prog_counter'
+         */
+        int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+                           int thiscontext, char *prog_counter);
+
+        /* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+         * until a resume cpu call is made.
+         */
+        int (*v3_cpustop)(unsigned int whichcpu);
+
+        /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+         * resume cpu call is made.
+         */
+        int (*v3_cpuidle)(unsigned int whichcpu);
+
+        /* v3_cpuresume() will resume processor 'whichcpu' executing
+         * starting with whatever 'pc' and 'npc' were left at the
+         * last 'idle' or 'stop' call.
+         */
+        int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+        int (*no_nextnode)(int node);
+        int (*no_child)(int node);
+        int (*no_proplen)(int node, char *name);
+        int (*no_getprop)(int node, char *name, char *val);
+        int (*no_setprop)(int node, char *name, char *val, int len);
+        char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     16
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    15
+
+struct linux_prom_registers {
+        unsigned int which_io;         /* is this in OBIO space? */
+        unsigned int phys_addr;        /* The physical address of this register */
+        unsigned int reg_size;         /* How many bytes does this register take up? */
+};
+
+struct linux_prom_irqs {
+        int pri;    /* IRQ priority */
+        int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+        unsigned int ot_child_space;
+        unsigned int ot_child_base;             /* Bus feels this */
+        unsigned int ot_parent_space;
+        unsigned int ot_parent_base;            /* CPU looks from here */
+        unsigned int or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+        /*
+         * We don't know what information this field contain.
+         * We guess, PCI device function is in bits 15:8
+         * So, ...
+         */
+        unsigned int which_io;  /* Let it be which_io */
+
+        unsigned int phys_hi;
+        unsigned int phys_lo;
+
+        unsigned int size_hi;
+        unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+        unsigned int child_phys_hi;     /* Only certain bits are encoded here. */
+        unsigned int child_phys_mid;
+        unsigned int child_phys_lo;
+
+        unsigned int parent_phys_hi;
+        unsigned int parent_phys_lo;
+
+        unsigned int size_hi;
+        unsigned int size_lo;
+};
+
+struct linux_prom_pci_assigned_addresses {
+        unsigned int which_io;
+
+        unsigned int phys_hi;
+        unsigned int phys_lo;
+
+        unsigned int size_hi;
+        unsigned int size_lo;
+};
+
+struct linux_prom_ebus_ranges {
+        unsigned int child_phys_hi;
+        unsigned int child_phys_lo;
+
+        unsigned int parent_phys_hi;
+        unsigned int parent_phys_mid;
+        unsigned int parent_phys_lo;
+
+        unsigned int size;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_OPENPROM_H) */
diff --git a/arch/sparc/include/asm/openprom_64.h b/arch/sparc/include/asm/openprom_64.h
new file mode 100644
index 000000000000..b69e4a8c9170
--- /dev/null
+++ b/arch/sparc/include/asm/openprom_64.h
@@ -0,0 +1,280 @@
+#ifndef __SPARC64_OPENPROM_H
+#define __SPARC64_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+        int (*v0_devopen)(char *device_str);
+        int (*v0_devclose)(int dev_desc);
+        int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+        int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+        int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+        int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+        int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+        int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+        int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+        int (*v2_inst2pkg)(int d);      /* Convert ihandle to phandle */
+        char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+        void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+        /* To map devices into virtual I/O space. */
+        char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+        void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+        int (*v2_dev_open)(char *devpath);
+        void (*v2_dev_close)(int d);
+        int (*v2_dev_read)(int d, char *buf, int nbytes);
+        int (*v2_dev_write)(int d, char *buf, int nbytes);
+        int (*v2_dev_seek)(int d, int hi, int lo);
+
+        /* Never issued (multistage load support) */
+        void (*v2_wheee2)(void);
+        void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+        struct linux_mlist_v0 *theres_more;
+        unsigned start_adr;
+        unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+        struct linux_mlist_v0 **v0_totphys;
+        struct linux_mlist_v0 **v0_prommap;
+        struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+        char *argv[8];
+        char args[100];
+        char boot_dev[2];
+        int boot_dev_ctrl;
+        int boot_dev_unit;
+        int dev_partition;
+        char *kernel_file_name;
+        void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+        char **bootpath;
+        char **bootargs;
+        int *fd_stdin;
+        int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+        /* Version numbers. */
+        unsigned int pv_magic_cookie;
+        unsigned int pv_romvers;
+        unsigned int pv_plugin_revision;
+        unsigned int pv_printrev;
+
+        /* Version 0 memory descriptors. */
+        struct linux_mem_v0 pv_v0mem;
+
+        /* Node operations. */
+        struct linux_nodeops *pv_nodeops;
+
+        char **pv_bootstr;
+        struct linux_dev_v0_funcs pv_v0devops;
+
+        char *pv_stdin;
+        char *pv_stdout;
+#define PROMDEV_KBD     0               /* input from keyboard */
+#define PROMDEV_SCREEN  0               /* output to screen */
+#define PROMDEV_TTYA    1               /* in/out to ttya */
+#define PROMDEV_TTYB    2               /* in/out to ttyb */
+
+        /* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+        int (*pv_getchar)(void);
+        void (*pv_putchar)(int ch);
+
+        /* Non-blocking variants. */
+        int (*pv_nbgetchar)(void);
+        int (*pv_nbputchar)(int ch);
+
+        void (*pv_putstr)(char *str, int len);
+
+        /* Miscellany. */
+        void (*pv_reboot)(char *bootstr);
+        void (*pv_printf)(__const__ char *fmt, ...);
+        void (*pv_abort)(void);
+        __volatile__ int *pv_ticks;
+        void (*pv_halt)(void);
+        void (**pv_synchook)(void);
+
+        /* Evaluate a forth string, not different proto for V0 and V2->up. */
+        union {
+                void (*v0_eval)(int len, char *str);
+                void (*v2_eval)(char *str);
+        } pv_fortheval;
+
+        struct linux_arguments_v0 **pv_v0bootargs;
+
+        /* Get ether address. */
+        unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+        struct linux_bootargs_v2 pv_v2bootargs;
+        struct linux_dev_v2_funcs pv_v2devops;
+
+        int filler[15];
+
+        /* This one is sun4c/sun4 only. */
+        void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+        /* Prom version 3 Multiprocessor routines. This stuff is crazy.
+         * No joke. Calling these when there is only one cpu probably
+         * crashes the machine, have to test this. :-)
+         */
+
+        /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+         * 'thiscontext' executing at address 'prog_counter'
+         */
+        int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+                           int thiscontext, char *prog_counter);
+
+        /* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+         * until a resume cpu call is made.
+         */
+        int (*v3_cpustop)(unsigned int whichcpu);
+
+        /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+         * resume cpu call is made.
+         */
+        int (*v3_cpuidle)(unsigned int whichcpu);
+
+        /* v3_cpuresume() will resume processor 'whichcpu' executing
+         * starting with whatever 'pc' and 'npc' were left at the
+         * last 'idle' or 'stop' call.
+         */
+        int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+        int (*no_nextnode)(int node);
+        int (*no_child)(int node);
+        int (*no_proplen)(int node, char *name);
+        int (*no_getprop)(int node, char *name, char *val);
+        int (*no_setprop)(int node, char *name, char *val, int len);
+        char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     24
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    32
+
+struct linux_prom_registers {
+        unsigned which_io;      /* hi part of physical address                  */
+        unsigned phys_addr;     /* The physical address of this register        */
+        int reg_size;           /* How many bytes does this register take up?   */
+};
+
+struct linux_prom64_registers {
+        unsigned long phys_addr;
+        unsigned long reg_size;
+};
+
+struct linux_prom_irqs {
+        int pri;    /* IRQ priority */
+        int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+        unsigned int ot_child_space;
+        unsigned int ot_child_base;             /* Bus feels this */
+        unsigned int ot_parent_space;
+        unsigned int ot_parent_base;            /* CPU looks from here */
+        unsigned int or_size;
+};
+
+struct linux_prom64_ranges {
+        unsigned long ot_child_base;            /* Bus feels this */
+        unsigned long ot_parent_base;           /* CPU looks from here */
+        unsigned long or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+        unsigned int phys_hi;
+        unsigned int phys_mid;
+        unsigned int phys_lo;
+
+        unsigned int size_hi;
+        unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+        unsigned int child_phys_hi;     /* Only certain bits are encoded here. */
+        unsigned int child_phys_mid;
+        unsigned int child_phys_lo;
+
+        unsigned int parent_phys_hi;
+        unsigned int parent_phys_lo;
+
+        unsigned int size_hi;
+        unsigned int size_lo;
+};
+
+struct linux_prom_pci_intmap {
+        unsigned int phys_hi;
+        unsigned int phys_mid;
+        unsigned int phys_lo;
+
+        unsigned int interrupt;
+
+        int          cnode;
+        unsigned int cinterrupt;
+};
+
+struct linux_prom_pci_intmask {
+        unsigned int phys_hi;
+        unsigned int phys_mid;
+        unsigned int phys_lo;
+        unsigned int interrupt;
+};
+
+struct linux_prom_ebus_ranges {
+        unsigned int child_phys_hi;
+        unsigned int child_phys_lo;
+
+        unsigned int parent_phys_hi;
+        unsigned int parent_phys_mid;
+        unsigned int parent_phys_lo;
+
+        unsigned int size;
+};
+
+struct linux_prom_ebus_intmap {
+        unsigned int phys_hi;
+        unsigned int phys_lo;
+
+        unsigned int interrupt;
+
+        int          cnode;
+        unsigned int cinterrupt;
+};
+
+struct linux_prom_ebus_intmask {
+        unsigned int phys_hi;
+        unsigned int phys_lo;
+        unsigned int interrupt;
+};
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_OPENPROM_H) */
diff --git a/arch/sparc/include/asm/openpromio.h b/arch/sparc/include/asm/openpromio.h
new file mode 100644
index 000000000000..917fb8e9c633
--- /dev/null
+++ b/arch/sparc/include/asm/openpromio.h
@@ -0,0 +1,69 @@
+#ifndef _SPARC_OPENPROMIO_H
+#define _SPARC_OPENPROMIO_H
+
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * SunOS and Solaris /dev/openprom definitions. The ioctl values
+ * were chosen to be exactly equal to the SunOS equivalents.
+ */
+
+struct openpromio
+{
+        u_int   oprom_size;             /* Actual size of the oprom_array. */
+        char    oprom_array[1];         /* Holds property names and values. */
+};
+
+#define OPROMMAXPARAM   4096            /* Maximum size of oprom_array. */
+
+#define OPROMGETOPT             0x20004F01
+#define OPROMSETOPT             0x20004F02
+#define OPROMNXTOPT             0x20004F03
+#define OPROMSETOPT2            0x20004F04
+#define OPROMNEXT               0x20004F05
+#define OPROMCHILD              0x20004F06
+#define OPROMGETPROP            0x20004F07
+#define OPROMNXTPROP            0x20004F08
+#define OPROMU2P                0x20004F09
+#define OPROMGETCONS            0x20004F0A
+#define OPROMGETFBNAME          0x20004F0B
+#define OPROMGETBOOTARGS        0x20004F0C
+/* Linux extensions */                          /* Arguments in oprom_array: */
+#define OPROMSETCUR             0x20004FF0      /* int node - Sets current node */
+#define OPROMPCI2NODE           0x20004FF1      /* int pci_bus, pci_devfn - Sets current node to PCI device's node */
+#define OPROMPATH2NODE          0x20004FF2      /* char path[] - Set current node from fully qualified PROM path */
+
+/*
+ * Return values from OPROMGETCONS:
+ */
+
+#define OPROMCONS_NOT_WSCONS    0
+#define OPROMCONS_STDIN_IS_KBD  0x1     /* stdin device is kbd */
+#define OPROMCONS_STDOUT_IS_FB  0x2     /* stdout is a framebuffer */
+#define OPROMCONS_OPENPROM      0x4     /* supports openboot */
+
+
+/*
+ *  NetBSD/OpenBSD /dev/openprom definitions.
+ */
+
+struct opiocdesc
+{
+        int     op_nodeid;              /* PROM Node ID (value-result) */
+        int     op_namelen;             /* Length of op_name. */
+        char    __user *op_name;        /* Pointer to the property name. */
+        int     op_buflen;              /* Length of op_buf (value-result) */
+        char    __user *op_buf;         /* Pointer to buffer. */
+};
+
+#define OPIOCGET        _IOWR('O', 1, struct opiocdesc)
+#define OPIOCSET        _IOW('O', 2, struct opiocdesc)
+#define OPIOCNEXTPROP   _IOWR('O', 3, struct opiocdesc)
+#define OPIOCGETOPTNODE _IOR('O', 4, int)
+#define OPIOCGETNEXT    _IOWR('O', 5, int)
+#define OPIOCGETCHILD   _IOWR('O', 6, int)
+
+#endif /* _SPARC_OPENPROMIO_H */
+
diff --git a/arch/sparc/include/asm/oplib.h b/arch/sparc/include/asm/oplib.h
new file mode 100644
index 000000000000..72e04e13a6b4
--- /dev/null
+++ b/arch/sparc/include/asm/oplib.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPLIB_H
+#define ___ASM_SPARC_OPLIB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/oplib_64.h>
+#else
+#include <asm/oplib_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
new file mode 100644
index 000000000000..b2631da259e0
--- /dev/null
+++ b/arch/sparc/include/asm/oplib_32.h
@@ -0,0 +1,272 @@
+/*
+ * oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_OPLIB_H
+#define __SPARC_OPLIB_H
+
+#include <asm/openprom.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+
+/* The master romvec pointer... */
+extern struct linux_romvec *romvec;
+
+/* Enumeration to describe the prom major version we have detected. */
+enum prom_major_version {
+        PROM_V0,      /* Original sun4c V0 prom */
+        PROM_V2,      /* sun4c and early sun4m V2 prom */
+        PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
+        PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
+        PROM_SUN4,    /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */
+};
+
+extern enum prom_major_version prom_vers;
+/* Revision, and firmware revision. */
+extern unsigned int prom_rev, prom_prev;
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* Pointer to prom structure containing the device tree traversal
+ * and usage utility functions.  Only prom-lib should use these,
+ * users use the interface defined by the library only!
+ */
+extern struct linux_nodeops *prom_nodeops;
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(struct linux_romvec *rom_ptr);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Map and unmap devices in IO space at virtual addresses. Note that the
+ * virtual address you pass is a request and the prom may put your mappings
+ * somewhere else, so check your return value as that is where your new
+ * mappings really are!
+ *
+ * Another note, these are only available on V2 or higher proms!
+ */
+extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
+extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+                      unsigned int seek_lowval);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
+ */
+typedef void (*sync_func_t)(void);
+extern void prom_setsync(sync_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Get the prom major version. */
+extern int prom_version(void);
+
+/* Get the prom plugin revision. */
+extern int prom_getrev(void);
+
+/* Get the prom firmware revision. */
+extern int prom_getprev(void);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Multiprocessor operations... */
+
+/* Start the CPU with the given device tree node, context table, and context
+ * at the passed program counter.
+ */
+extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
+                         int context, char *program_counter);
+
+/* Stop the CPU with the passed device tree node. */
+extern int prom_stopcpu(int cpunode);
+
+/* Idle the CPU with the passed device tree node. */
+extern int prom_idlecpu(int cpunode);
+
+/* Re-Start the CPU with the passed device tree node. */
+extern int prom_restartcpu(int cpunode);
+
+/* PROM memory allocation facilities... */
+
+/* Allocated at possibly the given virtual address a chunk of the
+ * indicated size.
+ */
+extern char *prom_alloc(char *virt_hint, unsigned int size);
+
+/* Free a previously allocated chunk. */
+extern void prom_free(char *virt_addr, unsigned int size);
+
+/* Sun4/sun4c specific memory-management startup hook. */
+
+/* Map the passed segment in the given context at the passed
+ * virtual address.
+ */
+extern void prom_putsegment(int context, unsigned long virt_addr,
+                            int physical_segment);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int __must_check prom_getproperty(int thisnode, char *property,
+                                         char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, char *name);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure.
+ */
+extern char *prom_nextprop(int node, char *prev_property, char *buffer);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(char *name);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, char *property);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, char *prop_name, char *prop_value,
+                        int value_size);
+
+extern int prom_pathtoinode(char *path);
+extern int prom_inst2pkg(int);
+
+/* Dorking with Bus ranges... */
+
+/* Apply promlib probes OBIO ranges to registers. */
+extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
+
+/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
+extern void prom_apply_generic_ranges(int node, int parent,
+                                      struct linux_prom_registers *sbusregs, int nregs);
+
+/* CPU probing helpers.  */
+int cpu_find_by_instance(int instance, int *prom_node, int *mid);
+int cpu_find_by_mid(int mid, int *prom_node);
+int cpu_get_hwmid(int prom_node);
+
+extern spinlock_t prom_lock;
+
+#endif /* !(__SPARC_OPLIB_H) */
diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
new file mode 100644
index 000000000000..6d2c2ca98039
--- /dev/null
+++ b/arch/sparc/include/asm/oplib_64.h
@@ -0,0 +1,322 @@
+/* oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC64_OPLIB_H
+#define __SPARC64_OPLIB_H
+
+#include <asm/openprom.h>
+
+/* OBP version string. */
+extern char prom_version[];
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* PROM stdin and stdout */
+extern int prom_stdin, prom_stdout;
+
+/* /chosen node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_chosen_node;
+
+/* Helper values and strings in arch/sparc64/kernel/head.S */
+extern const char prom_peer_name[];
+extern const char prom_compatible_name[];
+extern const char prom_root_compatible[];
+extern const char prom_cpu_compatible[];
+extern const char prom_finddev_name[];
+extern const char prom_chosen_path[];
+extern const char prom_cpu_path[];
+extern const char prom_getprop_name[];
+extern const char prom_mmu_name[];
+extern const char prom_callmethod_name[];
+extern const char prom_translate_name[];
+extern const char prom_map_name[];
+extern const char prom_unmap_name[];
+extern int prom_mmu_ihandle_cache;
+extern unsigned int prom_boot_mapped_pc;
+extern unsigned int prom_boot_mapping_mode;
+extern unsigned long prom_boot_mapping_phys_high, prom_boot_mapping_phys_low;
+
+struct linux_mlist_p1275 {
+        struct linux_mlist_p1275 *theres_more;
+        unsigned long start_adr;
+        unsigned long num_bytes;
+};
+
+struct linux_mem_p1275 {
+        struct linux_mlist_p1275 **p1275_totphys;
+        struct linux_mlist_p1275 **p1275_prommap;
+        struct linux_mlist_p1275 **p1275_available; /* What we can use */
+};
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(void *cif_handler, void *cif_stack);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(const char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+                      unsigned int seek_lowval);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(const char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(const char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Halt and power-off the machine. */
+extern void prom_halt_power_off(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ */
+typedef int (*callback_func_t)(long *cmd);
+extern void prom_setcallback(callback_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(const char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Multiprocessor operations... */
+#ifdef CONFIG_SMP
+/* Start the CPU with the given device tree node at the passed program
+ * counter with the given arg passed in via register %o0.
+ */
+extern void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg);
+
+/* Start the CPU with the given cpu ID at the passed program
+ * counter with the given arg passed in via register %o0.
+ */
+extern void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg);
+
+/* Stop the CPU with the given cpu ID.  */
+extern void prom_stopcpu_cpuid(int cpuid);
+
+/* Stop the current CPU. */
+extern void prom_stopself(void);
+
+/* Idle the current CPU. */
+extern void prom_idleself(void);
+
+/* Resume the CPU with the passed device tree node. */
+extern void prom_resumecpu(int cpunode);
+#endif
+
+/* Power management interfaces. */
+
+/* Put the current CPU to sleep. */
+extern void prom_sleepself(void);
+
+/* Put the entire system to sleep. */
+extern int prom_sleepsystem(void);
+
+/* Initiate a wakeup event. */
+extern int prom_wakeupsystem(void);
+
+/* MMU and memory related OBP interfaces. */
+
+/* Get unique string identifying SIMM at given physical address. */
+extern int prom_getunumber(int syndrome_code,
+                           unsigned long phys_addr,
+                           char *buf, int buflen);
+
+/* Retain physical memory to the caller across soft resets. */
+extern unsigned long prom_retain(const char *name,
+                                 unsigned long pa_low, unsigned long pa_high,
+                                 long size, long align);
+
+/* Load explicit I/D TLB entries into the calling processor. */
+extern long prom_itlb_load(unsigned long index,
+                           unsigned long tte_data,
+                           unsigned long vaddr);
+
+extern long prom_dtlb_load(unsigned long index,
+                           unsigned long tte_data,
+                           unsigned long vaddr);
+
+/* Map/Unmap client program address ranges.  First the format of
+ * the mapping mode argument.
+ */
+#define PROM_MAP_WRITE  0x0001 /* Writable */
+#define PROM_MAP_READ   0x0002 /* Readable - sw */
+#define PROM_MAP_EXEC   0x0004 /* Executable - sw */
+#define PROM_MAP_LOCKED 0x0010 /* Locked, use i/dtlb load calls for this instead */
+#define PROM_MAP_CACHED 0x0020 /* Cacheable in both L1 and L2 caches */
+#define PROM_MAP_SE     0x0040 /* Side-Effects */
+#define PROM_MAP_GLOB   0x0080 /* Global */
+#define PROM_MAP_IE     0x0100 /* Invert-Endianness */
+#define PROM_MAP_DEFAULT (PROM_MAP_WRITE | PROM_MAP_READ | PROM_MAP_EXEC | PROM_MAP_CACHED)
+
+extern int prom_map(int mode, unsigned long size,
+                    unsigned long vaddr, unsigned long paddr);
+extern void prom_unmap(unsigned long size, unsigned long vaddr);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, const char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int prom_getproperty(int thisnode, const char *property,
+                            char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, const char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, const char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, const char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, const char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, const char *name);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, const char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error. Buffer should be at least 32B long.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure. Buffer should be at least 32B long.
+ */
+extern char *prom_nextprop(int node, const char *prev_property, char *buffer);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, const char *property);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(const char *name);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, const char *prop_name, char *prop_value,
+                        int value_size);
+
+extern int prom_pathtoinode(const char *path);
+extern int prom_inst2pkg(int);
+extern int prom_service_exists(const char *service_name);
+extern void prom_sun4v_guest_soft_state(void);
+
+extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
+
+/* Client interface level routines. */
+extern long p1275_cmd(const char *, long, ...);
+
+#if 0
+#define P1275_SIZE(x) ((((long)((x) / 32)) << 32) | (x))
+#else
+#define P1275_SIZE(x) x
+#endif
+
+/* We support at most 16 input and 1 output argument */
+#define P1275_ARG_NUMBER                0
+#define P1275_ARG_IN_STRING             1
+#define P1275_ARG_OUT_BUF               2
+#define P1275_ARG_OUT_32B               3
+#define P1275_ARG_IN_FUNCTION           4
+#define P1275_ARG_IN_BUF                5
+#define P1275_ARG_IN_64B                6
+
+#define P1275_IN(x) ((x) & 0xf)
+#define P1275_OUT(x) (((x) << 4) & 0xf0)
+#define P1275_INOUT(i,o) (P1275_IN(i)|P1275_OUT(o))
+#define P1275_ARG(n,x) ((x) << ((n)*3 + 8))
+
+#endif /* !(__SPARC64_OPLIB_H) */
diff --git a/arch/sparc/include/asm/page.h b/arch/sparc/include/asm/page.h
new file mode 100644
index 000000000000..f21de0349025
--- /dev/null
+++ b/arch/sparc/include/asm/page.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PAGE_H
+#define ___ASM_SPARC_PAGE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
new file mode 100644
index 000000000000..cf5fb70ca1c1
--- /dev/null
+++ b/arch/sparc/include/asm/page_32.h
@@ -0,0 +1,160 @@
+/*
+ * page.h:  Various defines and such for MMU operations on the Sparc for
+ *          the Linux kernel.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PAGE_H
+#define _SPARC_PAGE_H
+
+#ifdef CONFIG_SUN4
+#define PAGE_SHIFT   13
+#else
+#define PAGE_SHIFT   12
+#endif
+#ifndef __ASSEMBLY__
+/* I have my suspicions... -DaveM */
+#define PAGE_SIZE    (1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE    (1 << PAGE_SHIFT)
+#endif
+#define PAGE_MASK    (~(PAGE_SIZE-1))
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#define clear_page(page)         memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from)      memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+#define clear_user_page(addr, vaddr, page)      \
+        do {    clear_page(addr);               \
+                sparc_flush_page_to_ram(page);  \
+        } while (0)
+#define copy_user_page(to, from, vaddr, page)   \
+        do {    copy_page(to, from);            \
+                sparc_flush_page_to_ram(page);  \
+        } while (0)
+
+/* The following structure is used to hold the physical
+ * memory configuration of the machine.  This is filled in
+ * prom_meminit() and is later used by mem_init() to set up
+ * mem_map[].  We statically allocate SPARC_PHYS_BANKS+1 of
+ * these structs, this is arbitrary.  The entry after the
+ * last valid one has num_bytes==0.
+ */
+struct sparc_phys_banks {
+  unsigned long base_addr;
+  unsigned long num_bytes;
+};
+
+#define SPARC_PHYS_BANKS 32
+
+extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
+
+/* Cache alias structure.  Entry is valid if context != -1. */
+struct cache_palias {
+        unsigned long vaddr;
+        int context;
+};
+
+/* passing structs on the Sparc slow us down tremendously... */
+
+/* #define STRICT_MM_TYPECHECKS */
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long ctxd; } ctxd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long iopgprot; } iopgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define iopte_val(x)    ((x).iopte)
+#define pmd_val(x)      ((x).pmdv[0])
+#define pgd_val(x)      ((x).pgd)
+#define ctxd_val(x)     ((x).ctxd)
+#define pgprot_val(x)   ((x).pgprot)
+#define iopgprot_val(x) ((x).iopgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __iopte(x)      ((iopte_t) { (x) } )
+/* #define __pmd(x)        ((pmd_t) { (x) } ) */ /* XXX procedure with loop */
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __ctxd(x)       ((ctxd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+#define __iopgprot(x)   ((iopgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long ctxd_t;
+typedef unsigned long pgprot_t;
+typedef unsigned long iopgprot_t;
+
+#define pte_val(x)      (x)
+#define iopte_val(x)    (x)
+#define pmd_val(x)      ((x).pmdv[0])
+#define pgd_val(x)      (x)
+#define ctxd_val(x)     (x)
+#define pgprot_val(x)   (x)
+#define iopgprot_val(x) (x)
+
+#define __pte(x)        (x)
+#define __iopte(x)      (x)
+/* #define __pmd(x)        (x) */ /* XXX later */
+#define __pgd(x)        (x)
+#define __ctxd(x)       (x)
+#define __pgprot(x)     (x)
+#define __iopgprot(x)   (x)
+
+#endif
+
+typedef struct page *pgtable_t;
+
+extern unsigned long sparc_unmapped_base;
+
+BTFIXUPDEF_SETHI(sparc_unmapped_base)
+
+#define TASK_UNMAPPED_BASE      BTFIXUP_SETHI(sparc_unmapped_base)
+
+#else /* !(__ASSEMBLY__) */
+
+#define __pgprot(x)     (x)
+
+#endif /* !(__ASSEMBLY__) */
+
+#define PAGE_OFFSET     0xf0000000
+#ifndef __ASSEMBLY__
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+#endif
+#define __pa(x)                 ((unsigned long)(x) - PAGE_OFFSET + phys_base)
+#define __va(x)                 ((void *)((unsigned long) (x) - phys_base + PAGE_OFFSET))
+
+#define virt_to_phys            __pa
+#define phys_to_virt            __va
+
+#define ARCH_PFN_OFFSET         (pfn_base)
+#define virt_to_page(kaddr)     (mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
+
+#define pfn_valid(pfn)          (((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
+#define virt_addr_valid(kaddr)  ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
+
+#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_EXEC | \
+                                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _SPARC_PAGE_H */
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
new file mode 100644
index 000000000000..b579b910ef51
--- /dev/null
+++ b/arch/sparc/include/asm/page_64.h
@@ -0,0 +1,135 @@
+#ifndef _SPARC64_PAGE_H
+#define _SPARC64_PAGE_H
+
+#include <linux/const.h>
+
+#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
+#define PAGE_SHIFT   13
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
+#define PAGE_SHIFT   16
+#else
+#error No page size specified in kernel configuration
+#endif
+
+#define PAGE_SIZE    (_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK    (~(PAGE_SIZE-1))
+
+/* Flushing for D-cache alias handling is only needed if
+ * the page size is smaller than 16K.
+ */
+#if PAGE_SHIFT < 14
+#define DCACHE_ALIASING_POSSIBLE
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT             22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define HPAGE_SHIFT             19
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT             16
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE              (_AC(1,UL) << HPAGE_SHIFT)
+#define HPAGE_MASK              (~(HPAGE_SIZE - 1UL))
+#define HUGETLB_PAGE_ORDER      (HPAGE_SHIFT - PAGE_SHIFT)
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
+
+#ifndef __ASSEMBLY__
+
+extern void _clear_page(void *page);
+#define clear_page(X)   _clear_page((void *)(X))
+struct page;
+extern void clear_user_page(void *addr, unsigned long vaddr, struct page *page);
+#define copy_page(X,Y)  memcpy((void *)(X), (void *)(Y), PAGE_SIZE)
+extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *topage);
+
+/* Unlike sparc32, sparc64's parameter passing API is more
+ * sane in that structures which as small enough are passed
+ * in registers instead of on the stack.  Thus, setting
+ * STRICT_MM_TYPECHECKS does not generate worse code so
+ * let's enable it to get the type checking.
+ */
+
+#define STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/* These are used to make use of C type-checking.. */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned int pmd; } pmd_t;
+typedef struct { unsigned int pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define iopte_val(x)    ((x).iopte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)      ((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __iopte(x)      ((iopte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else
+/* .. while these make it easier on the compiler */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef unsigned int pmd_t;
+typedef unsigned int pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define iopte_val(x)    (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)      (x)
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __iopte(x)      (x)
+#define __pmd(x)        (x)
+#define __pgd(x)        (x)
+#define __pgprot(x)     (x)
+
+#endif /* (STRICT_MM_TYPECHECKS) */
+
+typedef struct page *pgtable_t;
+
+#define TASK_UNMAPPED_BASE      (test_thread_flag(TIF_32BIT) ? \
+                                 (_AC(0x0000000070000000,UL)) : \
+                                 (_AC(0xfffff80000000000,UL) + (1UL << 32UL)))
+
+#include <asm-generic/memory_model.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+/* We used to stick this into a hard-coded global register (%g4)
+ * but that does not make sense anymore.
+ */
+#define PAGE_OFFSET             _AC(0xFFFFF80000000000,UL)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(x)                 ((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x)                 ((void *)((unsigned long) (x) + PAGE_OFFSET))
+
+#define pfn_to_kaddr(pfn)       __va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr)>>PAGE_SHIFT)
+
+#define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define virt_to_phys __pa
+#define phys_to_virt __va
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_EXEC | \
+                                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/page.h>
+
+#endif /* _SPARC64_PAGE_H */
diff --git a/arch/sparc/include/asm/param.h b/arch/sparc/include/asm/param.h
new file mode 100644
index 000000000000..9836d9a3cb9a
--- /dev/null
+++ b/arch/sparc/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASMSPARC_PARAM_H
+#define _ASMSPARC_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ             CONFIG_HZ       /* Internal kernel timer frequency */
+# define USER_HZ        100     /* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE   8192    /* Thanks for sun4's we carry baggage... */
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+#define MAXHOSTNAMELEN  64      /* max length of hostname */
+
+#endif
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
new file mode 100644
index 000000000000..7818b2523b8d
--- /dev/null
+++ b/arch/sparc/include/asm/parport.h
@@ -0,0 +1,246 @@
+/* parport.h: sparc64 specific parport initialization and dma.
+ *
+ * Copyright (C) 1999  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _ASM_SPARC64_PARPORT_H
+#define _ASM_SPARC64_PARPORT_H 1
+
+#include <asm/ebus.h>
+#include <asm/ns87303.h>
+#include <asm/of_device.h>
+#include <asm/prom.h>
+
+#define PARPORT_PC_MAX_PORTS    PARPORT_MAX
+
+/*
+ * While sparc64 doesn't have an ISA DMA API, we provide something that looks
+ * close enough to make parport_pc happy
+ */
+#define HAS_DMA
+
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({      unsigned long flags; \
+        spin_lock_irqsave(&dma_spin_lock, flags); \
+        flags; \
+})
+
+#define release_dma_lock(__flags) \
+        spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+static struct sparc_ebus_info {
+        struct ebus_dma_info info;
+        unsigned int addr;
+        unsigned int count;
+        int lock;
+
+        struct parport *port;
+} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS];
+
+static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS);
+
+static inline int request_dma(unsigned int dmanr, const char *device_id)
+{
+        if (dmanr >= PARPORT_PC_MAX_PORTS)
+                return -EINVAL;
+        if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0)
+                return -EBUSY;
+        return 0;
+}
+
+static inline void free_dma(unsigned int dmanr)
+{
+        if (dmanr >= PARPORT_PC_MAX_PORTS) {
+                printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
+                return;
+        }
+        if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) {
+                printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr);
+                return;
+        }
+}
+
+static inline void enable_dma(unsigned int dmanr)
+{
+        ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1);
+
+        if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info,
+                             sparc_ebus_dmas[dmanr].addr,
+                             sparc_ebus_dmas[dmanr].count))
+                BUG();
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+        ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0);
+}
+
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+        /* nothing */
+}
+
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+        ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE));
+}
+
+static inline void set_dma_addr(unsigned int dmanr, unsigned int addr)
+{
+        sparc_ebus_dmas[dmanr].addr = addr;
+}
+
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        sparc_ebus_dmas[dmanr].count = count;
+}
+
+static inline unsigned int get_dma_residue(unsigned int dmanr)
+{
+        return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
+}
+
+static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match)
+{
+        unsigned long base = op->resource[0].start;
+        unsigned long config = op->resource[1].start;
+        unsigned long d_base = op->resource[2].start;
+        unsigned long d_len;
+        struct device_node *parent;
+        struct parport *p;
+        int slot, err;
+
+        parent = op->node->parent;
+        if (!strcmp(parent->name, "dma")) {
+                p = parport_pc_probe_port(base, base + 0x400,
+                                          op->irqs[0], PARPORT_DMA_NOFIFO,
+                                          op->dev.parent->parent);
+                if (!p)
+                        return -ENOMEM;
+                dev_set_drvdata(&op->dev, p);
+                return 0;
+        }
+
+        for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) {
+                if (!test_and_set_bit(slot, dma_slot_map))
+                        break;
+        }
+        err = -ENODEV;
+        if (slot >= PARPORT_PC_MAX_PORTS)
+                goto out_err;
+
+        spin_lock_init(&sparc_ebus_dmas[slot].info.lock);
+
+        d_len = (op->resource[2].end - d_base) + 1UL;
+        sparc_ebus_dmas[slot].info.regs =
+                of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA");
+
+        if (!sparc_ebus_dmas[slot].info.regs)
+                goto out_clear_map;
+
+        sparc_ebus_dmas[slot].info.flags = 0;
+        sparc_ebus_dmas[slot].info.callback = NULL;
+        sparc_ebus_dmas[slot].info.client_cookie = NULL;
+        sparc_ebus_dmas[slot].info.irq = 0xdeadbeef;
+        strcpy(sparc_ebus_dmas[slot].info.name, "parport");
+        if (ebus_dma_register(&sparc_ebus_dmas[slot].info))
+                goto out_unmap_regs;
+
+        ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1);
+
+        /* Configure IRQ to Push Pull, Level Low */
+        /* Enable ECP, set bit 2 of the CTR first */
+        outb(0x04, base + 0x02);
+        ns87303_modify(config, PCR,
+                       PCR_EPP_ENABLE |
+                       PCR_IRQ_ODRAIN,
+                       PCR_ECP_ENABLE |
+                       PCR_ECP_CLK_ENA |
+                       PCR_IRQ_POLAR);
+
+        /* CTR bit 5 controls direction of port */
+        ns87303_modify(config, PTR,
+                       0, PTR_LPT_REG_DIR);
+
+        p = parport_pc_probe_port(base, base + 0x400,
+                                  op->irqs[0],
+                                  slot,
+                                  op->dev.parent);
+        err = -ENOMEM;
+        if (!p)
+                goto out_disable_irq;
+
+        dev_set_drvdata(&op->dev, p);
+
+        return 0;
+
+out_disable_irq:
+        ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
+        ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
+
+out_unmap_regs:
+        of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len);
+
+out_clear_map:
+        clear_bit(slot, dma_slot_map);
+
+out_err:
+        return err;
+}
+
+static int __devexit ecpp_remove(struct of_device *op)
+{
+        struct parport *p = dev_get_drvdata(&op->dev);
+        int slot = p->dma;
+
+        parport_pc_unregister_port(p);
+
+        if (slot != PARPORT_DMA_NOFIFO) {
+                unsigned long d_base = op->resource[2].start;
+                unsigned long d_len;
+
+                d_len = (op->resource[2].end - d_base) + 1UL;
+
+                ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
+                ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
+                of_iounmap(&op->resource[2],
+                           sparc_ebus_dmas[slot].info.regs,
+                           d_len);
+                clear_bit(slot, dma_slot_map);
+        }
+
+        return 0;
+}
+
+static struct of_device_id ecpp_match[] = {
+        {
+                .name = "ecpp",
+        },
+        {
+                .name = "parallel",
+                .compatible = "ecpp",
+        },
+        {
+                .name = "parallel",
+                .compatible = "ns87317-ecpp",
+        },
+        {},
+};
+
+static struct of_platform_driver ecpp_driver = {
+        .name                   = "ecpp",
+        .match_table            = ecpp_match,
+        .probe                  = ecpp_probe,
+        .remove                 = __devexit_p(ecpp_remove),
+};
+
+static int parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+        of_register_driver(&ecpp_driver, &of_bus_type);
+
+        return 0;
+}
+
+#endif /* !(_ASM_SPARC64_PARPORT_H */
diff --git a/arch/sparc/include/asm/pbm.h b/arch/sparc/include/asm/pbm.h
new file mode 100644
index 000000000000..458a4916d14d
--- /dev/null
+++ b/arch/sparc/include/asm/pbm.h
@@ -0,0 +1,47 @@
+/*
+ *
+ * pbm.h: PCI bus module pseudo driver software state
+ *        Adopted from sparc64 by V. Roganov and G. Raiko
+ *
+ * Original header:
+ * pbm.h: U2P PCI bus module pseudo driver software state.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * To put things into perspective, consider sparc64 with a few PCI controllers.
+ * Each type would have an own structure, with instances related one to one.
+ * We have only pcic on sparc, but we want to be compatible with sparc64 pbm.h.
+ * All three represent different abstractions.
+ *   pci_bus  - Linux PCI subsystem view of a PCI bus (including bridged buses)
+ *   pbm      - Arch-specific view of a PCI bus (sparc or sparc64)
+ *   pcic     - Chip-specific information for PCIC.
+ */
+
+#ifndef __SPARC_PBM_H
+#define __SPARC_PBM_H
+
+#include <linux/pci.h>
+#include <asm/oplib.h>
+#include <asm/prom.h>
+
+struct linux_pbm_info {
+        int             prom_node;
+        char            prom_name[64];
+        /* struct linux_prom_pci_ranges pbm_ranges[PROMREG_MAX]; */
+        /* int          num_pbm_ranges; */
+
+        /* Now things for the actual PCI bus probes. */
+        unsigned int    pci_first_busno;        /* Can it be nonzero? */
+        struct pci_bus  *pci_bus;               /* Was inline, MJ allocs now */
+};
+
+/* PCI devices which are not bridges have this placed in their pci_dev
+ * sysdata member.  This makes OBP aware PCI device drivers easier to
+ * code.
+ */
+struct pcidev_cookie {
+        struct linux_pbm_info           *pbm;
+        struct device_node              *prom_node;
+};
+
+#endif /* !(__SPARC_PBM_H) */
diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h
new file mode 100644
index 000000000000..6e14fd179335
--- /dev/null
+++ b/arch/sparc/include/asm/pci.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PCI_H
+#define ___ASM_SPARC_PCI_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pci_64.h>
+#else
+#include <asm/pci_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
new file mode 100644
index 000000000000..0ee949d220c0
--- /dev/null
+++ b/arch/sparc/include/asm/pci_32.h
@@ -0,0 +1,171 @@
+#ifndef __SPARC_PCI_H
+#define __SPARC_PCI_H
+
+#ifdef __KERNEL__
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses()     0
+#define pcibios_scan_all_fns(a, b)      0
+
+#define PCIBIOS_MIN_IO          0UL
+#define PCIBIOS_MIN_MEM         0UL
+
+#define PCI_IRQ_NONE            0xffffffff
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+        /* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+        /* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (0)
+
+#include <asm/scatterlist.h>
+
+struct pci_dev;
+
+/* Allocate and map kernel buffer using consistent mode DMA for a device.
+ * hwdev should be valid struct pci_dev pointer for PCI devices.
+ */
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
+
+/* Free and unmap a consistent DMA buffer.
+ * cpu_addr is what was returned from pci_alloc_consistent,
+ * size must be the same as what as passed into pci_alloc_consistent,
+ * and likewise dma_addr must be the same as what *dma_addrp was set to.
+ *
+ * References to the memory and mappings assosciated with cpu_addr/dma_addr
+ * past this call are illegal.
+ */
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+/* Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
+ */
+extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
+
+/* Unmap a single streaming mode DMA translation.  The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call.  All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
+        dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)         \
+        __u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)                  \
+        ((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)         \
+        (((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)                    \
+        ((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)           \
+        (((PTR)->LEN_NAME) = (VAL))
+
+/*
+ * Same as above, only with pages instead of mapped addresses.
+ */
+extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
+                        unsigned long offset, size_t size, int direction);
+extern void pci_unmap_page(struct pci_dev *hwdev,
+                        dma_addr_t dma_address, size_t size, int direction);
+
+/* Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scather-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
+
+/* Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, you
+ * must first perform a pci_dma_sync_for_device, and then the device
+ * again owns the buffer.
+ */
+extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+        return 1;
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+                                        enum pci_dma_burst_strategy *strat,
+                                        unsigned long *strategy_parameter)
+{
+        *strat = PCI_DMA_BURST_INFINITY;
+        *strategy_parameter = ~0UL;
+}
+#endif
+
+#define PCI_DMA_ERROR_CODE      (~(dma_addr_t)0x0)
+
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+                                        dma_addr_t dma_addr)
+{
+        return (dma_addr == PCI_DMA_ERROR_CODE);
+}
+
+struct device_node;
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#endif /* __SPARC_PCI_H */
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
new file mode 100644
index 000000000000..4f79a54948f6
--- /dev/null
+++ b/arch/sparc/include/asm/pci_64.h
@@ -0,0 +1,210 @@
+#ifndef __SPARC64_PCI_H
+#define __SPARC64_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/dma-mapping.h>
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses()     0
+#define pcibios_scan_all_fns(a, b)      0
+
+#define PCIBIOS_MIN_IO          0UL
+#define PCIBIOS_MIN_MEM         0UL
+
+#define PCI_IRQ_NONE            0xffffffff
+
+#define PCI_CACHE_LINE_BYTES    64
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+        /* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+        /* We don't do dynamic PCI IRQ allocation */
+}
+
+/* The PCI address space does not equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (0)
+
+static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+                                         dma_addr_t *dma_handle)
+{
+        return dma_alloc_coherent(&pdev->dev, size, dma_handle, GFP_ATOMIC);
+}
+
+static inline void pci_free_consistent(struct pci_dev *pdev, size_t size,
+                                       void *vaddr, dma_addr_t dma_handle)
+{
+        return dma_free_coherent(&pdev->dev, size, vaddr, dma_handle);
+}
+
+static inline dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr,
+                                        size_t size, int direction)
+{
+        return dma_map_single(&pdev->dev, ptr, size,
+                              (enum dma_data_direction) direction);
+}
+
+static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
+                                    size_t size, int direction)
+{
+        dma_unmap_single(&pdev->dev, dma_addr, size,
+                         (enum dma_data_direction) direction);
+}
+
+#define pci_map_page(dev, page, off, size, dir) \
+        pci_map_single(dev, (page_address(page) + (off)), size, dir)
+#define pci_unmap_page(dev,addr,sz,dir) \
+        pci_unmap_single(dev,addr,sz,dir)
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
+        dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)         \
+        __u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)                  \
+        ((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)         \
+        (((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)                    \
+        ((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)           \
+        (((PTR)->LEN_NAME) = (VAL))
+
+static inline int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg,
+                             int nents, int direction)
+{
+        return dma_map_sg(&pdev->dev, sg, nents,
+                          (enum dma_data_direction) direction);
+}
+
+static inline void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg,
+                                int nents, int direction)
+{
+        dma_unmap_sg(&pdev->dev, sg, nents,
+                     (enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_single_for_cpu(struct pci_dev *pdev,
+                                               dma_addr_t dma_handle,
+                                               size_t size, int direction)
+{
+        dma_sync_single_for_cpu(&pdev->dev, dma_handle, size,
+                                (enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_single_for_device(struct pci_dev *pdev,
+                                                  dma_addr_t dma_handle,
+                                                  size_t size, int direction)
+{
+        /* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev,
+                                           struct scatterlist *sg,
+                                           int nents, int direction)
+{
+        dma_sync_sg_for_cpu(&pdev->dev, sg, nents,
+                            (enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_sg_for_device(struct pci_dev *pdev,
+                                              struct scatterlist *sg,
+                                              int nelems, int direction)
+{
+        /* No flushing needed to sync cpu writes to the device.  */
+}
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+/* PCI IOMMU mapping bypass support. */
+
+/* PCI 64-bit addressing works for all slots on all controller
+ * types on sparc64.  However, it requires that the device
+ * can drive enough of the 64 bits.
+ */
+#define PCI64_REQUIRED_MASK     (~(dma64_addr_t)0)
+#define PCI64_ADDR_BASE         0xfffc000000000000UL
+
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+                                        dma_addr_t dma_addr)
+{
+        return dma_mapping_error(&pdev->dev, dma_addr);
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+                                        enum pci_dma_burst_strategy *strat,
+                                        unsigned long *strategy_parameter)
+{
+        unsigned long cacheline_size;
+        u8 byte;
+
+        pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+        if (byte == 0)
+                cacheline_size = 1024;
+        else
+                cacheline_size = (int) byte * 4;
+
+        *strat = PCI_DMA_BURST_BOUNDARY;
+        *strategy_parameter = cacheline_size;
+}
+#endif
+
+/* Return the index of the PCI controller for device PDEV. */
+
+extern int pci_domain_nr(struct pci_bus *bus);
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+        return 1;
+}
+
+/* Platform support for /proc/bus/pci/X/Y mmap()s. */
+
+#define HAVE_PCI_MMAP
+#define HAVE_ARCH_PCI_GET_UNMAPPED_AREA
+#define get_pci_unmapped_area get_fb_unmapped_area
+
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                               enum pci_mmap_state mmap_state,
+                               int write_combine);
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+                        struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+                        struct pci_bus_region *region);
+
+extern struct resource *pcibios_select_root(struct pci_dev *, struct resource *);
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+        return PCI_IRQ_NONE;
+}
+
+struct device_node;
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
+
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+                                 const struct resource *rsrc,
+                                 resource_size_t *start, resource_size_t *end);
+#endif /* __KERNEL__ */
+
+#endif /* __SPARC64_PCI_H */
diff --git a/arch/sparc/include/asm/pcic.h b/arch/sparc/include/asm/pcic.h
new file mode 100644
index 000000000000..f20ef562b265
--- /dev/null
+++ b/arch/sparc/include/asm/pcic.h
@@ -0,0 +1,123 @@
+/*
+ * pcic.h: JavaEngine 1 specific PCI definitions.
+ *
+ * Copyright (C) 1998 V. Roganov and G. Raiko
+ */
+
+#ifndef __SPARC_PCIC_H
+#define __SPARC_PCIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/smp.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <asm/pbm.h>
+
+struct linux_pcic {
+        void __iomem            *pcic_regs;
+        unsigned long           pcic_io;
+        void __iomem            *pcic_config_space_addr;
+        void __iomem            *pcic_config_space_data;
+        struct resource         pcic_res_regs;
+        struct resource         pcic_res_io;
+        struct resource         pcic_res_cfg_addr;
+        struct resource         pcic_res_cfg_data;
+        struct linux_pbm_info   pbm;
+        struct pcic_ca2irq      *pcic_imap;
+        int                     pcic_imdim;
+};
+
+extern int pcic_probe(void);
+/* Erm... MJ redefined pcibios_present() so that it does not work early. */
+extern int pcic_present(void);
+extern void sun4m_pci_init_IRQ(void);
+
+#endif
+
+/* Size of PCI I/O space which we relocate. */
+#define PCI_SPACE_SIZE                  0x1000000       /* 16 MB */
+
+/* PCIC Register Set. */
+#define PCI_DIAGNOSTIC_0                0x40    /* 32 bits */
+#define PCI_SIZE_0                      0x44    /* 32 bits */
+#define PCI_SIZE_1                      0x48    /* 32 bits */
+#define PCI_SIZE_2                      0x4c    /* 32 bits */
+#define PCI_SIZE_3                      0x50    /* 32 bits */
+#define PCI_SIZE_4                      0x54    /* 32 bits */
+#define PCI_SIZE_5                      0x58    /* 32 bits */
+#define PCI_PIO_CONTROL                 0x60    /* 8  bits */
+#define PCI_DVMA_CONTROL                0x62    /* 8  bits */
+#define  PCI_DVMA_CONTROL_INACTIVITY_REQ        (1<<0)
+#define  PCI_DVMA_CONTROL_IOTLB_ENABLE          (1<<0)
+#define  PCI_DVMA_CONTROL_IOTLB_DISABLE         0
+#define  PCI_DVMA_CONTROL_INACTIVITY_ACK        (1<<4)
+#define PCI_INTERRUPT_CONTROL           0x63    /* 8  bits */
+#define PCI_CPU_INTERRUPT_PENDING       0x64    /* 32 bits */
+#define PCI_DIAGNOSTIC_1                0x68    /* 16 bits */
+#define PCI_SOFTWARE_INT_CLEAR          0x6a    /* 16 bits */
+#define PCI_SOFTWARE_INT_SET            0x6e    /* 16 bits */
+#define PCI_SYS_INT_PENDING             0x70    /* 32 bits */
+#define  PCI_SYS_INT_PENDING_PIO                0x40000000
+#define  PCI_SYS_INT_PENDING_DMA                0x20000000
+#define  PCI_SYS_INT_PENDING_PCI                0x10000000
+#define  PCI_SYS_INT_PENDING_APSR               0x08000000
+#define PCI_SYS_INT_TARGET_MASK         0x74    /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_CLEAR   0x78    /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_SET     0x7c    /* 32 bits */
+#define PCI_SYS_INT_PENDING_CLEAR       0x83    /* 8  bits */
+#define  PCI_SYS_INT_PENDING_CLEAR_ALL          0x80
+#define  PCI_SYS_INT_PENDING_CLEAR_PIO          0x40
+#define  PCI_SYS_INT_PENDING_CLEAR_DMA          0x20
+#define  PCI_SYS_INT_PENDING_CLEAR_PCI          0x10
+#define PCI_IOTLB_CONTROL               0x84    /* 8  bits */
+#define PCI_INT_SELECT_LO               0x88    /* 16 bits */
+#define PCI_ARBITRATION_SELECT          0x8a    /* 16 bits */
+#define PCI_INT_SELECT_HI               0x8c    /* 16 bits */
+#define PCI_HW_INT_OUTPUT               0x8e    /* 16 bits */
+#define PCI_IOTLB_RAM_INPUT             0x90    /* 32 bits */
+#define PCI_IOTLB_CAM_INPUT             0x94    /* 32 bits */
+#define PCI_IOTLB_RAM_OUTPUT            0x98    /* 32 bits */
+#define PCI_IOTLB_CAM_OUTPUT            0x9c    /* 32 bits */
+#define PCI_SMBAR0                      0xa0    /* 8  bits */
+#define PCI_MSIZE0                      0xa1    /* 8  bits */
+#define PCI_PMBAR0                      0xa2    /* 8  bits */
+#define PCI_SMBAR1                      0xa4    /* 8  bits */
+#define PCI_MSIZE1                      0xa5    /* 8  bits */
+#define PCI_PMBAR1                      0xa6    /* 8  bits */
+#define PCI_SIBAR                       0xa8    /* 8  bits */
+#define   PCI_SIBAR_ADDRESS_MASK        0xf
+#define PCI_ISIZE                       0xa9    /* 8  bits */
+#define   PCI_ISIZE_16M                 0xf
+#define   PCI_ISIZE_32M                 0xe
+#define   PCI_ISIZE_64M                 0xc
+#define   PCI_ISIZE_128M                0x8
+#define   PCI_ISIZE_256M                0x0
+#define PCI_PIBAR                       0xaa    /* 8  bits */
+#define PCI_CPU_COUNTER_LIMIT_HI        0xac    /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT_LO        0xb0    /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT           0xb4    /* 32 bits */
+#define PCI_SYS_LIMIT                   0xb8    /* 32 bits */
+#define PCI_SYS_COUNTER                 0xbc    /* 32 bits */
+#define   PCI_SYS_COUNTER_OVERFLOW      (1<<31) /* Limit reached */
+#define PCI_SYS_LIMIT_PSEUDO            0xc0    /* 32 bits */
+#define PCI_USER_TIMER_CONTROL          0xc4    /* 8  bits */
+#define PCI_USER_TIMER_CONFIG           0xc5    /* 8  bits */
+#define PCI_COUNTER_IRQ                 0xc6    /* 8  bits */
+#define  PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq)  ((((sys_irq) & 0xf) << 4) | \
+                                                  ((cpu_irq) & 0xf))
+#define  PCI_COUNTER_IRQ_SYS(v)                 (((v) >> 4) & 0xf)
+#define  PCI_COUNTER_IRQ_CPU(v)                 ((v) & 0xf)
+#define PCI_PIO_ERROR_COMMAND           0xc7    /* 8  bits */
+#define PCI_PIO_ERROR_ADDRESS           0xc8    /* 32 bits */
+#define PCI_IOTLB_ERROR_ADDRESS         0xcc    /* 32 bits */
+#define PCI_SYS_STATUS                  0xd0    /* 8  bits */
+#define   PCI_SYS_STATUS_RESET_ENABLE           (1<<0)
+#define   PCI_SYS_STATUS_RESET                  (1<<1)
+#define   PCI_SYS_STATUS_WATCHDOG_RESET         (1<<4)
+#define   PCI_SYS_STATUS_PCI_RESET              (1<<5)
+#define   PCI_SYS_STATUS_PCI_RESET_ENABLE       (1<<6)
+#define   PCI_SYS_STATUS_PCI_SATTELITE_MODE     (1<<7)
+
+#endif /* !(__SPARC_PCIC_H) */
diff --git a/arch/sparc/include/asm/percpu.h b/arch/sparc/include/asm/percpu.h
new file mode 100644
index 000000000000..bfb1d19ff1bf
--- /dev/null
+++ b/arch/sparc/include/asm/percpu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PERCPU_H
+#define ___ASM_SPARC_PERCPU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/percpu_64.h>
+#else
+#include <asm/percpu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/percpu_32.h b/arch/sparc/include/asm/percpu_32.h
new file mode 100644
index 000000000000..06066a7aaec3
--- /dev/null
+++ b/arch/sparc/include/asm/percpu_32.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_SPARC_PERCPU__
+#define __ARCH_SPARC_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SPARC_PERCPU__ */
diff --git a/arch/sparc/include/asm/percpu_64.h b/arch/sparc/include/asm/percpu_64.h
new file mode 100644
index 000000000000..bee64593023e
--- /dev/null
+++ b/arch/sparc/include/asm/percpu_64.h
@@ -0,0 +1,28 @@
+#ifndef __ARCH_SPARC64_PERCPU__
+#define __ARCH_SPARC64_PERCPU__
+
+#include <linux/compiler.h>
+
+register unsigned long __local_per_cpu_offset asm("g5");
+
+#ifdef CONFIG_SMP
+
+extern void real_setup_per_cpu_areas(void);
+
+extern unsigned long __per_cpu_base;
+extern unsigned long __per_cpu_shift;
+#define __per_cpu_offset(__cpu) \
+        (__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#define __my_cpu_offset __local_per_cpu_offset
+
+#else /* ! SMP */
+
+#define real_setup_per_cpu_areas()              do { } while (0)
+
+#endif  /* SMP */
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SPARC64_PERCPU__ */
diff --git a/arch/sparc/include/asm/perfctr.h b/arch/sparc/include/asm/perfctr.h
new file mode 100644
index 000000000000..836873002b75
--- /dev/null
+++ b/arch/sparc/include/asm/perfctr.h
@@ -0,0 +1,173 @@
+/*----------------------------------------
+  PERFORMANCE INSTRUMENTATION  
+  Guillaume Thouvenin           08/10/98
+  David S. Miller               10/06/98
+  ---------------------------------------*/
+#ifndef PERF_COUNTER_API
+#define PERF_COUNTER_API
+
+/* sys_perfctr() interface.  First arg is operation code
+ * from enumeration below.  The meaning of further arguments
+ * are determined by the operation code.
+ *
+ * int sys_perfctr(int opcode, unsigned long arg0,
+ *                 unsigned long arg1, unsigned long arg2)
+ *
+ * Pointers which are passed by the user are pointers to 64-bit
+ * integers.
+ *
+ * Once enabled, performance counter state is retained until the
+ * process either exits or performs an exec.  That is, performance
+ * counters remain enabled for fork/clone children.
+ */
+enum perfctr_opcode {
+        /* Enable UltraSparc performance counters, ARG0 is pointer
+         * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer
+         * to 64-bit accumulator for D1 counter.  ARG2 is a pointer to
+         * the initial PCR register value to use.
+         */
+        PERFCTR_ON,
+
+        /* Disable UltraSparc performance counters.  The PCR is written
+         * with zero and the user counter accumulator pointers and
+         * working PCR register value are forgotten.
+         */
+        PERFCTR_OFF,
+
+        /* Add current D0 and D1 PIC values into user pointers given
+         * in PERFCTR_ON operation.  The PIC is cleared before returning.
+         */
+        PERFCTR_READ,
+
+        /* Clear the PIC register. */
+        PERFCTR_CLRPIC,
+
+        /* Begin using a new PCR value, the pointer to which is passed
+         * in ARG0.  The PIC is also cleared after the new PCR value is
+         * written.
+         */
+        PERFCTR_SETPCR,
+
+        /* Store in pointer given in ARG0 the current PCR register value
+         * being used.
+         */
+        PERFCTR_GETPCR
+};
+
+/* I don't want the kernel's namespace to be polluted with this
+ * stuff when this file is included.  --DaveM
+ */
+#ifndef __KERNEL__
+
+#define  PRIV 0x00000001
+#define  SYS  0x00000002
+#define  USR  0x00000004
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT            0x00000000
+#define  INSTR_CNT            0x00000010
+#define  DISPATCH0_IC_MISS    0x00000020
+#define  DISPATCH0_STOREBUF   0x00000030
+#define  IC_REF               0x00000080
+#define  DC_RD                0x00000090
+#define  DC_WR                0x000000A0
+#define  LOAD_USE             0x000000B0
+#define  EC_REF               0x000000C0
+#define  EC_WRITE_HIT_RDO     0x000000D0
+#define  EC_SNOOP_INV         0x000000E0
+#define  EC_RD_HIT            0x000000F0
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT          0x00000000
+#define  US3_INSTR_CNT          0x00000010
+#define  US3_DISPATCH0_IC_MISS  0x00000020
+#define  US3_DISPATCH0_BR_TGT   0x00000030
+#define  US3_DISPATCH0_2ND_BR   0x00000040
+#define  US3_RSTALL_STOREQ      0x00000050
+#define  US3_RSTALL_IU_USE      0x00000060
+#define  US3_IC_REF             0x00000080
+#define  US3_DC_RD              0x00000090
+#define  US3_DC_WR              0x000000a0
+#define  US3_EC_REF             0x000000c0
+#define  US3_EC_WR_HIT_RTO      0x000000d0
+#define  US3_EC_SNOOP_INV       0x000000e0
+#define  US3_EC_RD_MISS         0x000000f0
+#define  US3_PC_PORT0_RD        0x00000100
+#define  US3_SI_SNOOP           0x00000110
+#define  US3_SI_CIQ_FLOW        0x00000120
+#define  US3_SI_OWNED           0x00000130
+#define  US3_SW_COUNT_0         0x00000140
+#define  US3_IU_BR_MISS_TAKEN   0x00000150
+#define  US3_IU_BR_COUNT_TAKEN  0x00000160
+#define  US3_DISP_RS_MISPRED    0x00000170
+#define  US3_FA_PIPE_COMPL      0x00000180
+#define  US3_MC_READS_0         0x00000200
+#define  US3_MC_READS_1         0x00000210
+#define  US3_MC_READS_2         0x00000220
+#define  US3_MC_READS_3         0x00000230
+#define  US3_MC_STALLS_0        0x00000240
+#define  US3_MC_STALLS_2        0x00000250
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT_D1         0x00000000
+#define  INSTR_CNT_D1         0x00000800
+#define  DISPATCH0_IC_MISPRED 0x00001000
+#define  DISPATCH0_FP_USE     0x00001800
+#define  IC_HIT               0x00004000
+#define  DC_RD_HIT            0x00004800
+#define  DC_WR_HIT            0x00005000
+#define  LOAD_USE_RAW         0x00005800
+#define  EC_HIT               0x00006000
+#define  EC_WB                0x00006800
+#define  EC_SNOOP_CB          0x00007000
+#define  EC_IT_HIT            0x00007800
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT_D1       0x00000000
+#define  US3_INSTR_CNT_D1       0x00000800
+#define  US3_DISPATCH0_MISPRED  0x00001000
+#define  US3_IC_MISS_CANCELLED  0x00001800
+#define  US3_RE_ENDIAN_MISS     0x00002000
+#define  US3_RE_FPU_BYPASS      0x00002800
+#define  US3_RE_DC_MISS         0x00003000
+#define  US3_RE_EC_MISS         0x00003800
+#define  US3_IC_MISS            0x00004000
+#define  US3_DC_RD_MISS         0x00004800
+#define  US3_DC_WR_MISS         0x00005000
+#define  US3_RSTALL_FP_USE      0x00005800
+#define  US3_EC_MISSES          0x00006000
+#define  US3_EC_WB              0x00006800
+#define  US3_EC_SNOOP_CB        0x00007000
+#define  US3_EC_IC_MISS         0x00007800
+#define  US3_RE_PC_MISS         0x00008000
+#define  US3_ITLB_MISS          0x00008800
+#define  US3_DTLB_MISS          0x00009000
+#define  US3_WC_MISS            0x00009800
+#define  US3_WC_SNOOP_CB        0x0000a000
+#define  US3_WC_SCRUBBED        0x0000a800
+#define  US3_WC_WB_WO_READ      0x0000b000
+#define  US3_PC_SOFT_HIT        0x0000c000
+#define  US3_PC_SNOOP_INV       0x0000c800
+#define  US3_PC_HARD_HIT        0x0000d000
+#define  US3_PC_PORT1_RD        0x0000d800
+#define  US3_SW_COUNT_1         0x0000e000
+#define  US3_IU_STAT_BR_MIS_UNTAKEN     0x0000e800
+#define  US3_IU_STAT_BR_COUNT_UNTAKEN   0x0000f000
+#define  US3_PC_MS_MISSES       0x0000f800
+#define  US3_MC_WRITES_0        0x00010800
+#define  US3_MC_WRITES_1        0x00011000
+#define  US3_MC_WRITES_2        0x00011800
+#define  US3_MC_WRITES_3        0x00012000
+#define  US3_MC_STALLS_1        0x00012800
+#define  US3_MC_STALLS_3        0x00013000
+#define  US3_RE_RAW_MISS        0x00013800
+#define  US3_FM_PIPE_COMPLETION 0x00014000
+
+struct vcounter_struct {
+  unsigned long long vcnt0;
+  unsigned long long vcnt1;
+};
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(PERF_COUNTER_API) */
diff --git a/arch/sparc/include/asm/pgalloc.h b/arch/sparc/include/asm/pgalloc.h
new file mode 100644
index 000000000000..b6db1f7cdcab
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGALLOC_H
+#define ___ASM_SPARC_PGALLOC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgalloc_64.h>
+#else
+#include <asm/pgalloc_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
new file mode 100644
index 000000000000..681582d26969
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc_32.h
@@ -0,0 +1,68 @@
+#ifndef _SPARC_PGALLOC_H
+#define _SPARC_PGALLOC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include <asm/page.h>
+#include <asm/btfixup.h>
+
+struct page;
+
+extern struct pgtable_cache_struct {
+        unsigned long *pgd_cache;
+        unsigned long *pte_cache;
+        unsigned long pgtable_cache_sz;
+        unsigned long pgd_cache_sz;
+} pgt_quicklists;
+#define pgd_quicklist           (pgt_quicklists.pgd_cache)
+#define pmd_quicklist           ((unsigned long *)0)
+#define pte_quicklist           (pgt_quicklists.pte_cache)
+#define pgtable_cache_size      (pgt_quicklists.pgtable_cache_sz)
+#define pgd_cache_size          (pgt_quicklists.pgd_cache_sz)
+
+extern void check_pgt_cache(void);
+BTFIXUPDEF_CALL(void,    do_check_pgt_cache, int, int)
+#define do_check_pgt_cache(low,high) BTFIXUP_CALL(do_check_pgt_cache)(low,high)
+
+BTFIXUPDEF_CALL(pgd_t *, get_pgd_fast, void)
+#define get_pgd_fast()          BTFIXUP_CALL(get_pgd_fast)()
+
+BTFIXUPDEF_CALL(void, free_pgd_fast, pgd_t *)
+#define free_pgd_fast(pgd)      BTFIXUP_CALL(free_pgd_fast)(pgd)
+
+#define pgd_free(mm, pgd)       free_pgd_fast(pgd)
+#define pgd_alloc(mm)   get_pgd_fast()
+
+BTFIXUPDEF_CALL(void, pgd_set, pgd_t *, pmd_t *)
+#define pgd_set(pgdp,pmdp) BTFIXUP_CALL(pgd_set)(pgdp,pmdp)
+#define pgd_populate(MM, PGD, PMD)      pgd_set(PGD, PMD)
+
+BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
+#define pmd_alloc_one(mm, address)      BTFIXUP_CALL(pmd_alloc_one)(mm, address)
+
+BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
+#define free_pmd_fast(pmd)      BTFIXUP_CALL(free_pmd_fast)(pmd)
+
+#define pmd_free(mm, pmd)       free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+
+BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
+#define pmd_populate(MM, PMD, PTE)        BTFIXUP_CALL(pmd_populate)(PMD, PTE)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *)
+#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE)
+
+BTFIXUPDEF_CALL(pgtable_t , pte_alloc_one, struct mm_struct *, unsigned long)
+#define pte_alloc_one(mm, address)      BTFIXUP_CALL(pte_alloc_one)(mm, address)
+BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long)
+#define pte_alloc_one_kernel(mm, addr)  BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr)
+
+BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
+#define pte_free_kernel(mm, pte)        BTFIXUP_CALL(free_pte_fast)(pte)
+
+BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
+#define pte_free(mm, pte)       BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte)        pte_free((tlb)->mm, pte)
+
+#endif /* _SPARC_PGALLOC_H */
diff --git a/arch/sparc/include/asm/pgalloc_64.h b/arch/sparc/include/asm/pgalloc_64.h
new file mode 100644
index 000000000000..5bdfa2c6e400
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc_64.h
@@ -0,0 +1,81 @@
+#ifndef _SPARC64_PGALLOC_H
+#define _SPARC64_PGALLOC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/quicklist.h>
+
+#include <asm/spitfire.h>
+#include <asm/cpudata.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+
+/* Page table allocation/freeing. */
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+        return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+        quicklist_free(0, NULL, pgd);
+}
+
+#define pud_populate(MM, PUD, PMD)      pud_set(PUD, PMD)
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+        return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+        quicklist_free(0, NULL, pmd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+                                          unsigned long address)
+{
+        return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+                                        unsigned long address)
+{
+        struct page *page;
+        void *pg;
+
+        pg = quicklist_alloc(0, GFP_KERNEL, NULL);
+        if (!pg)
+                return NULL;
+        page = virt_to_page(pg);
+        pgtable_page_ctor(page);
+        return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+        quicklist_free(0, NULL, pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
+{
+        pgtable_page_dtor(ptepage);
+        quicklist_free_page(0, NULL, ptepage);
+}
+
+
+#define pmd_populate_kernel(MM, PMD, PTE)       pmd_set(PMD, PTE)
+#define pmd_populate(MM,PMD,PTE_PAGE)           \
+        pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void check_pgt_cache(void)
+{
+        quicklist_trim(0, NULL, 25, 16);
+}
+
+#endif /* _SPARC64_PGALLOC_H */
diff --git a/arch/sparc/include/asm/pgtable.h b/arch/sparc/include/asm/pgtable.h
new file mode 100644
index 000000000000..59ba6f620732
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGTABLE_H
+#define ___ASM_SPARC_PGTABLE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgtable_64.h>
+#else
+#include <asm/pgtable_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
new file mode 100644
index 000000000000..08237fda8874
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -0,0 +1,480 @@
+#ifndef _SPARC_PGTABLE_H
+#define _SPARC_PGTABLE_H
+
+/*  asm/pgtable.h:  Defines and functions used to work
+ *                        with Sparc page tables.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/spinlock.h>
+#include <linux/swap.h>
+#include <asm/types.h>
+#ifdef CONFIG_SUN4
+#include <asm/pgtsun4.h>
+#else
+#include <asm/pgtsun4c.h>
+#endif
+#include <asm/pgtsrmmu.h>
+#include <asm/vac-ops.h>
+#include <asm/oplib.h>
+#include <asm/btfixup.h>
+#include <asm/system.h>
+
+
+struct vm_area_struct;
+struct page;
+
+extern void load_mmu(void);
+extern unsigned long calc_highpages(void);
+
+BTFIXUPDEF_SIMM13(pgdir_shift)
+BTFIXUPDEF_SETHI(pgdir_size)
+BTFIXUPDEF_SETHI(pgdir_mask)
+
+BTFIXUPDEF_SIMM13(ptrs_per_pmd)
+BTFIXUPDEF_SIMM13(ptrs_per_pgd)
+BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
+
+#define pte_ERROR(e)   __builtin_trap()
+#define pmd_ERROR(e)   __builtin_trap()
+#define pgd_ERROR(e)   __builtin_trap()
+
+BTFIXUPDEF_INT(page_none)
+BTFIXUPDEF_INT(page_copy)
+BTFIXUPDEF_INT(page_readonly)
+BTFIXUPDEF_INT(page_kernel)
+
+#define PMD_SHIFT               SUN4C_PMD_SHIFT
+#define PMD_SIZE                (1UL << PMD_SHIFT)
+#define PMD_MASK                (~(PMD_SIZE-1))
+#define PMD_ALIGN(__addr)       (((__addr) + ~PMD_MASK) & PMD_MASK)
+#define PGDIR_SHIFT             BTFIXUP_SIMM13(pgdir_shift)
+#define PGDIR_SIZE              BTFIXUP_SETHI(pgdir_size)
+#define PGDIR_MASK              BTFIXUP_SETHI(pgdir_mask)
+#define PTRS_PER_PTE            1024
+#define PTRS_PER_PMD            BTFIXUP_SIMM13(ptrs_per_pmd)
+#define PTRS_PER_PGD            BTFIXUP_SIMM13(ptrs_per_pgd)
+#define USER_PTRS_PER_PGD       BTFIXUP_SIMM13(user_ptrs_per_pgd)
+#define FIRST_USER_ADDRESS      0
+#define PTE_SIZE                (PTRS_PER_PTE*4)
+
+#define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
+extern pgprot_t PAGE_SHARED;
+#define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
+#define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))
+
+extern unsigned long page_kernel;
+
+#ifdef MODULE
+#define PAGE_KERNEL     page_kernel
+#else
+#define PAGE_KERNEL    __pgprot(BTFIXUP_INT(page_kernel))
+#endif
+
+/* Top-level page directory */
+extern pgd_t swapper_pg_dir[1024];
+
+extern void paging_init(void);
+
+/* Page table for 0-4MB for everybody, on the Sparc this
+ * holds the same as on the i386.
+ */
+extern pte_t pg0[1024];
+extern pte_t pg1[1024];
+extern pte_t pg2[1024];
+extern pte_t pg3[1024];
+
+extern unsigned long ptr_in_current_pgd;
+
+/* Here is a trick, since mmap.c need the initializer elements for
+ * protection_map[] to be constant at compile time, I set the following
+ * to all zeros.  I set it to the real values after I link in the
+ * appropriate MMU page table routines at boot time.
+ */
+#define __P000  __pgprot(0)
+#define __P001  __pgprot(0)
+#define __P010  __pgprot(0)
+#define __P011  __pgprot(0)
+#define __P100  __pgprot(0)
+#define __P101  __pgprot(0)
+#define __P110  __pgprot(0)
+#define __P111  __pgprot(0)
+
+#define __S000  __pgprot(0)
+#define __S001  __pgprot(0)
+#define __S010  __pgprot(0)
+#define __S011  __pgprot(0)
+#define __S100  __pgprot(0)
+#define __S101  __pgprot(0)
+#define __S110  __pgprot(0)
+#define __S111  __pgprot(0)
+
+extern int num_contexts;
+
+/* First physical page can be anywhere, the following is needed so that
+ * va-->pa and vice versa conversions work properly without performance
+ * hit for all __pa()/__va() operations.
+ */
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t * __bad_pagetable(void);
+extern pte_t __bad_page(void);
+extern unsigned long empty_zero_page;
+
+#define BAD_PAGETABLE __bad_pagetable()
+#define BAD_PAGE __bad_page()
+#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+
+/*
+ */
+BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
+BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
+
+#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
+#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
+
+BTFIXUPDEF_SETHI(none_mask)
+BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
+BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
+
+static inline int pte_none(pte_t pte)
+{
+        return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
+#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
+
+BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
+BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
+BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
+
+static inline int pmd_none(pmd_t pmd)
+{
+        return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
+#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
+#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
+
+BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
+BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
+
+#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
+#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
+#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
+#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+BTFIXUPDEF_HALF(pte_writei)
+BTFIXUPDEF_HALF(pte_dirtyi)
+BTFIXUPDEF_HALF(pte_youngi)
+
+static int pte_write(pte_t pte) __attribute_const__;
+static inline int pte_write(pte_t pte)
+{
+        return pte_val(pte) & BTFIXUP_HALF(pte_writei);
+}
+
+static int pte_dirty(pte_t pte) __attribute_const__;
+static inline int pte_dirty(pte_t pte)
+{
+        return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
+}
+
+static int pte_young(pte_t pte) __attribute_const__;
+static inline int pte_young(pte_t pte)
+{
+        return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
+}
+
+/*
+ * The following only work if pte_present() is not true.
+ */
+BTFIXUPDEF_HALF(pte_filei)
+
+static int pte_file(pte_t pte) __attribute_const__;
+static inline int pte_file(pte_t pte)
+{
+        return pte_val(pte) & BTFIXUP_HALF(pte_filei);
+}
+
+static inline int pte_special(pte_t pte)
+{
+        return 0;
+}
+
+/*
+ */
+BTFIXUPDEF_HALF(pte_wrprotecti)
+BTFIXUPDEF_HALF(pte_mkcleani)
+BTFIXUPDEF_HALF(pte_mkoldi)
+
+static pte_t pte_wrprotect(pte_t pte) __attribute_const__;
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+        return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
+}
+
+static pte_t pte_mkclean(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkclean(pte_t pte)
+{
+        return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
+}
+
+static pte_t pte_mkold(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkold(pte_t pte)
+{
+        return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
+}
+
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
+
+#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
+#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
+#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
+
+#define pte_mkspecial(pte)    (pte)
+
+#define pfn_pte(pfn, prot)              mk_pte(pfn_to_page(pfn), prot)
+
+BTFIXUPDEF_CALL(unsigned long,   pte_pfn, pte_t)
+#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
+#define pte_page(pte)   pfn_to_page(pte_pfn(pte))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
+
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
+BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t)
+
+#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
+#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
+#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
+
+#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot)
+
+BTFIXUPDEF_INT(pte_modify_mask)
+
+static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+        return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
+                pgprot_val(newprot));
+}
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
+#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
+
+/* Find an entry in the third-level page table.. */
+BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
+#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
+
+/*
+ * This shortcut works on sun4m (and sun4d) because the nocache area is static,
+ * and sun4c is guaranteed to have no highmem anyway.
+ */
+#define pte_offset_map(d, a)            pte_offset_kernel(d,a)
+#define pte_offset_map_nested(d, a)     pte_offset_kernel(d,a)
+
+#define pte_unmap(pte)          do{}while(0)
+#define pte_unmap_nested(pte)   do{}while(0)
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+
+BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
+
+#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+struct seq_file;
+BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
+
+#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
+
+/* Fault handler stuff... */
+#define FAULT_CODE_PROT     0x1
+#define FAULT_CODE_WRITE    0x2
+#define FAULT_CODE_USER     0x4
+
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+
+#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+
+BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
+    unsigned long, unsigned int)
+BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
+#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
+#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
+
+extern int invalid_segment;
+
+/* Encode and de-code a swap entry */
+BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
+BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
+BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
+
+#define __swp_type(__x)                 BTFIXUP_CALL(__swp_type)(__x)
+#define __swp_offset(__x)               BTFIXUP_CALL(__swp_offset)(__x)
+#define __swp_entry(__type,__off)       BTFIXUP_CALL(__swp_entry)(__type,__off)
+
+#define __pte_to_swp_entry(pte)         ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)           ((pte_t) { (x).val })
+
+/* file-offset-in-pte helpers */
+BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
+BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
+
+#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
+#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
+
+/*
+ * This is made a constant because mm/fremap.c required a constant.
+ * Note that layout of these bits is different between sun4c.c and srmmu.c.
+ */
+#define PTE_FILE_MAX_BITS 24
+
+/*
+ */
+struct ctx_list {
+        struct ctx_list *next;
+        struct ctx_list *prev;
+        unsigned int ctx_number;
+        struct mm_struct *ctx_mm;
+};
+
+extern struct ctx_list *ctx_list_pool;  /* Dynamically allocated */
+extern struct ctx_list ctx_free;        /* Head of free list */
+extern struct ctx_list ctx_used;        /* Head of used contexts list */
+
+#define NO_CONTEXT     -1
+
+static inline void remove_from_ctx_list(struct ctx_list *entry)
+{
+        entry->next->prev = entry->prev;
+        entry->prev->next = entry->next;
+}
+
+static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
+{
+        entry->next = head;
+        (entry->prev = head->prev)->next = entry;
+        head->prev = entry;
+}
+#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
+#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
+
+static inline unsigned long
+__get_phys (unsigned long addr)
+{
+        switch (sparc_cpu_model){
+        case sun4:
+        case sun4c:
+                return sun4c_get_pte (addr) << PAGE_SHIFT;
+        case sun4m:
+        case sun4d:
+                return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
+        default:
+                return 0;
+        }
+}
+
+static inline int
+__get_iospace (unsigned long addr)
+{
+        switch (sparc_cpu_model){
+        case sun4:
+        case sun4c:
+                return -1; /* Don't check iospace on sun4c */
+        case sun4m:
+        case sun4d:
+                return (srmmu_get_pte (addr) >> 28);
+        default:
+                return -1;
+        }
+}
+
+extern unsigned long *sparc_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) \
+        (test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
+
+extern int io_remap_pfn_range(struct vm_area_struct *vma,
+                              unsigned long from, unsigned long pfn,
+                              unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)      (pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)                (pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)                    (pfn & 0x0fffffffUL)
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({                                                                        \
+        int __changed = !pte_same(*(__ptep), __entry);                    \
+        if (__changed) {                                                  \
+                set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \
+                flush_tlb_page(__vma, __address);                         \
+        }                                                                 \
+        (sparc_cpu_model == sun4c) || __changed;                          \
+})
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VMALLOC_START           0xfe600000
+/* XXX Alter this when I get around to fixing sun4c - Anton */
+#define VMALLOC_END             0xffc00000
+
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()    do { } while (0)
+
+#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
new file mode 100644
index 000000000000..bb9ec2cce355
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -0,0 +1,775 @@
+/*
+ * pgtable.h: SpitFire page table operations.
+ *
+ * Copyright 1996,1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef _SPARC64_PGTABLE_H
+#define _SPARC64_PGTABLE_H
+
+/* This file contains the functions and defines necessary to modify and use
+ * the SpitFire page tables.
+ */
+
+#include <asm-generic/pgtable-nopud.h>
+
+#include <linux/compiler.h>
+#include <linux/const.h>
+#include <asm/types.h>
+#include <asm/spitfire.h>
+#include <asm/asi.h>
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+/* The kernel image occupies 0x4000000 to 0x6000000 (4MB --> 96MB).
+ * The page copy blockops can use 0x6000000 to 0x8000000.
+ * The TSB is mapped in the 0x8000000 to 0xa000000 range.
+ * The PROM resides in an area spanning 0xf0000000 to 0x100000000.
+ * The vmalloc area spans 0x100000000 to 0x200000000.
+ * Since modules need to be in the lowest 32-bits of the address space,
+ * we place them right before the OBP area from 0x10000000 to 0xf0000000.
+ * There is a single static kernel PMD which maps from 0x0 to address
+ * 0x400000000.
+ */
+#define TLBTEMP_BASE            _AC(0x0000000006000000,UL)
+#define TSBMAP_BASE             _AC(0x0000000008000000,UL)
+#define MODULES_VADDR           _AC(0x0000000010000000,UL)
+#define MODULES_LEN             _AC(0x00000000e0000000,UL)
+#define MODULES_END             _AC(0x00000000f0000000,UL)
+#define LOW_OBP_ADDRESS         _AC(0x00000000f0000000,UL)
+#define HI_OBP_ADDRESS          _AC(0x0000000100000000,UL)
+#define VMALLOC_START           _AC(0x0000000100000000,UL)
+#define VMALLOC_END             _AC(0x0000000200000000,UL)
+#define VMEMMAP_BASE            _AC(0x0000000200000000,UL)
+
+#define vmemmap                 ((struct page *)VMEMMAP_BASE)
+
+/* XXX All of this needs to be rethought so we can take advantage
+ * XXX cheetah's full 64-bit virtual address space, ie. no more hole
+ * XXX in the middle like on spitfire. -DaveM
+ */
+/*
+ * Given a virtual address, the lowest PAGE_SHIFT bits determine offset
+ * into the page; the next higher PAGE_SHIFT-3 bits determine the pte#
+ * in the proper pagetable (the -3 is from the 8 byte ptes, and each page
+ * table is a single page long). The next higher PMD_BITS determine pmd#
+ * in the proper pmdtable (where we must have PMD_BITS <= (PAGE_SHIFT-2)
+ * since the pmd entries are 4 bytes, and each pmd page is a single page
+ * long). Finally, the higher few bits determine pgde#.
+ */
+
+/* PMD_SHIFT determines the size of the area a second-level page
+ * table can map
+ */
+#define PMD_SHIFT       (PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SIZE        (_AC(1,UL) << PMD_SHIFT)
+#define PMD_MASK        (~(PMD_SIZE-1))
+#define PMD_BITS        (PAGE_SHIFT - 2)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT     (PAGE_SHIFT + (PAGE_SHIFT-3) + PMD_BITS)
+#define PGDIR_SIZE      (_AC(1,UL) << PGDIR_SHIFT)
+#define PGDIR_MASK      (~(PGDIR_SIZE-1))
+#define PGDIR_BITS      (PAGE_SHIFT - 2)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+/* Entries per page directory level. */
+#define PTRS_PER_PTE    (1UL << (PAGE_SHIFT-3))
+#define PTRS_PER_PMD    (1UL << PMD_BITS)
+#define PTRS_PER_PGD    (1UL << PGDIR_BITS)
+
+/* Kernel has a separate 44bit address space. */
+#define FIRST_USER_ADDRESS      0
+
+#define pte_ERROR(e)    __builtin_trap()
+#define pmd_ERROR(e)    __builtin_trap()
+#define pgd_ERROR(e)    __builtin_trap()
+
+#endif /* !(__ASSEMBLY__) */
+
+/* PTE bits which are the same in SUN4U and SUN4V format.  */
+#define _PAGE_VALID       _AC(0x8000000000000000,UL) /* Valid TTE            */
+#define _PAGE_R           _AC(0x8000000000000000,UL) /* Keep ref bit uptodate*/
+
+/* SUN4U pte bits... */
+#define _PAGE_SZ4MB_4U    _AC(0x6000000000000000,UL) /* 4MB Page             */
+#define _PAGE_SZ512K_4U   _AC(0x4000000000000000,UL) /* 512K Page            */
+#define _PAGE_SZ64K_4U    _AC(0x2000000000000000,UL) /* 64K Page             */
+#define _PAGE_SZ8K_4U     _AC(0x0000000000000000,UL) /* 8K Page              */
+#define _PAGE_NFO_4U      _AC(0x1000000000000000,UL) /* No Fault Only        */
+#define _PAGE_IE_4U       _AC(0x0800000000000000,UL) /* Invert Endianness    */
+#define _PAGE_SOFT2_4U    _AC(0x07FC000000000000,UL) /* Software bits, set 2 */
+#define _PAGE_RES1_4U     _AC(0x0002000000000000,UL) /* Reserved             */
+#define _PAGE_SZ32MB_4U   _AC(0x0001000000000000,UL) /* (Panther) 32MB page  */
+#define _PAGE_SZ256MB_4U  _AC(0x2001000000000000,UL) /* (Panther) 256MB page */
+#define _PAGE_SZALL_4U    _AC(0x6001000000000000,UL) /* All pgsz bits        */
+#define _PAGE_SN_4U       _AC(0x0000800000000000,UL) /* (Cheetah) Snoop      */
+#define _PAGE_RES2_4U     _AC(0x0000780000000000,UL) /* Reserved             */
+#define _PAGE_PADDR_4U    _AC(0x000007FFFFFFE000,UL) /* (Cheetah) pa[42:13]  */
+#define _PAGE_SOFT_4U     _AC(0x0000000000001F80,UL) /* Software bits:       */
+#define _PAGE_EXEC_4U     _AC(0x0000000000001000,UL) /* Executable SW bit    */
+#define _PAGE_MODIFIED_4U _AC(0x0000000000000800,UL) /* Modified (dirty)     */
+#define _PAGE_FILE_4U     _AC(0x0000000000000800,UL) /* Pagecache page       */
+#define _PAGE_ACCESSED_4U _AC(0x0000000000000400,UL) /* Accessed (ref'd)     */
+#define _PAGE_READ_4U     _AC(0x0000000000000200,UL) /* Readable SW Bit      */
+#define _PAGE_WRITE_4U    _AC(0x0000000000000100,UL) /* Writable SW Bit      */
+#define _PAGE_PRESENT_4U  _AC(0x0000000000000080,UL) /* Present              */
+#define _PAGE_L_4U        _AC(0x0000000000000040,UL) /* Locked TTE           */
+#define _PAGE_CP_4U       _AC(0x0000000000000020,UL) /* Cacheable in P-Cache */
+#define _PAGE_CV_4U       _AC(0x0000000000000010,UL) /* Cacheable in V-Cache */
+#define _PAGE_E_4U        _AC(0x0000000000000008,UL) /* side-Effect          */
+#define _PAGE_P_4U        _AC(0x0000000000000004,UL) /* Privileged Page      */
+#define _PAGE_W_4U        _AC(0x0000000000000002,UL) /* Writable             */
+
+/* SUN4V pte bits... */
+#define _PAGE_NFO_4V      _AC(0x4000000000000000,UL) /* No Fault Only        */
+#define _PAGE_SOFT2_4V    _AC(0x3F00000000000000,UL) /* Software bits, set 2 */
+#define _PAGE_MODIFIED_4V _AC(0x2000000000000000,UL) /* Modified (dirty)     */
+#define _PAGE_ACCESSED_4V _AC(0x1000000000000000,UL) /* Accessed (ref'd)     */
+#define _PAGE_READ_4V     _AC(0x0800000000000000,UL) /* Readable SW Bit      */
+#define _PAGE_WRITE_4V    _AC(0x0400000000000000,UL) /* Writable SW Bit      */
+#define _PAGE_PADDR_4V    _AC(0x00FFFFFFFFFFE000,UL) /* paddr[55:13]         */
+#define _PAGE_IE_4V       _AC(0x0000000000001000,UL) /* Invert Endianness    */
+#define _PAGE_E_4V        _AC(0x0000000000000800,UL) /* side-Effect          */
+#define _PAGE_CP_4V       _AC(0x0000000000000400,UL) /* Cacheable in P-Cache */
+#define _PAGE_CV_4V       _AC(0x0000000000000200,UL) /* Cacheable in V-Cache */
+#define _PAGE_P_4V        _AC(0x0000000000000100,UL) /* Privileged Page      */
+#define _PAGE_EXEC_4V     _AC(0x0000000000000080,UL) /* Executable Page      */
+#define _PAGE_W_4V        _AC(0x0000000000000040,UL) /* Writable             */
+#define _PAGE_SOFT_4V     _AC(0x0000000000000030,UL) /* Software bits        */
+#define _PAGE_FILE_4V     _AC(0x0000000000000020,UL) /* Pagecache page       */
+#define _PAGE_PRESENT_4V  _AC(0x0000000000000010,UL) /* Present              */
+#define _PAGE_RESV_4V     _AC(0x0000000000000008,UL) /* Reserved             */
+#define _PAGE_SZ16GB_4V   _AC(0x0000000000000007,UL) /* 16GB Page            */
+#define _PAGE_SZ2GB_4V    _AC(0x0000000000000006,UL) /* 2GB Page             */
+#define _PAGE_SZ256MB_4V  _AC(0x0000000000000005,UL) /* 256MB Page           */
+#define _PAGE_SZ32MB_4V   _AC(0x0000000000000004,UL) /* 32MB Page            */
+#define _PAGE_SZ4MB_4V    _AC(0x0000000000000003,UL) /* 4MB Page             */
+#define _PAGE_SZ512K_4V   _AC(0x0000000000000002,UL) /* 512K Page            */
+#define _PAGE_SZ64K_4V    _AC(0x0000000000000001,UL) /* 64K Page             */
+#define _PAGE_SZ8K_4V     _AC(0x0000000000000000,UL) /* 8K Page              */
+#define _PAGE_SZALL_4V    _AC(0x0000000000000007,UL) /* All pgsz bits        */
+
+#if PAGE_SHIFT == 13
+#define _PAGE_SZBITS_4U _PAGE_SZ8K_4U
+#define _PAGE_SZBITS_4V _PAGE_SZ8K_4V
+#elif PAGE_SHIFT == 16
+#define _PAGE_SZBITS_4U _PAGE_SZ64K_4U
+#define _PAGE_SZBITS_4V _PAGE_SZ64K_4V
+#else
+#error Wrong PAGE_SHIFT specified
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define _PAGE_SZHUGE_4U _PAGE_SZ4MB_4U
+#define _PAGE_SZHUGE_4V _PAGE_SZ4MB_4V
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define _PAGE_SZHUGE_4U _PAGE_SZ512K_4U
+#define _PAGE_SZHUGE_4V _PAGE_SZ512K_4V
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define _PAGE_SZHUGE_4U _PAGE_SZ64K_4U
+#define _PAGE_SZHUGE_4V _PAGE_SZ64K_4V
+#endif
+
+/* These are actually filled in at boot time by sun4{u,v}_pgprot_init() */
+#define __P000  __pgprot(0)
+#define __P001  __pgprot(0)
+#define __P010  __pgprot(0)
+#define __P011  __pgprot(0)
+#define __P100  __pgprot(0)
+#define __P101  __pgprot(0)
+#define __P110  __pgprot(0)
+#define __P111  __pgprot(0)
+
+#define __S000  __pgprot(0)
+#define __S001  __pgprot(0)
+#define __S010  __pgprot(0)
+#define __S011  __pgprot(0)
+#define __S100  __pgprot(0)
+#define __S101  __pgprot(0)
+#define __S110  __pgprot(0)
+#define __S111  __pgprot(0)
+
+#ifndef __ASSEMBLY__
+
+extern pte_t mk_pte_io(unsigned long, pgprot_t, int, unsigned long);
+
+extern unsigned long pte_sz_bits(unsigned long size);
+
+extern pgprot_t PAGE_KERNEL;
+extern pgprot_t PAGE_KERNEL_LOCKED;
+extern pgprot_t PAGE_COPY;
+extern pgprot_t PAGE_SHARED;
+
+/* XXX This uglyness is for the atyfb driver's sparc mmap() support. XXX */
+extern unsigned long _PAGE_IE;
+extern unsigned long _PAGE_E;
+extern unsigned long _PAGE_CACHE;
+
+extern unsigned long pg_iobits;
+extern unsigned long _PAGE_ALL_SZ_BITS;
+extern unsigned long _PAGE_SZBITS;
+
+extern struct page *mem_map_zero;
+#define ZERO_PAGE(vaddr)        (mem_map_zero)
+
+/* PFNs are real physical page numbers.  However, mem_map only begins to record
+ * per-page information starting at pfn_base.  This is to handle systems where
+ * the first physical page in the machine is at some huge physical address,
+ * such as 4GB.   This is common on a partitioned E10000, for example.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
+{
+        unsigned long paddr = pfn << PAGE_SHIFT;
+        unsigned long sz_bits;
+
+        sz_bits = 0UL;
+        if (_PAGE_SZBITS_4U != 0UL || _PAGE_SZBITS_4V != 0UL) {
+                __asm__ __volatile__(
+                "\n661: sethi           %%uhi(%1), %0\n"
+                "       sllx            %0, 32, %0\n"
+                "       .section        .sun4v_2insn_patch, \"ax\"\n"
+                "       .word           661b\n"
+                "       mov             %2, %0\n"
+                "       nop\n"
+                "       .previous\n"
+                : "=r" (sz_bits)
+                : "i" (_PAGE_SZBITS_4U), "i" (_PAGE_SZBITS_4V));
+        }
+        return __pte(paddr | sz_bits | pgprot_val(prot));
+}
+#define mk_pte(page, pgprot)    pfn_pte(page_to_pfn(page), (pgprot))
+
+/* This one can be done with two shifts.  */
+static inline unsigned long pte_pfn(pte_t pte)
+{
+        unsigned long ret;
+
+        __asm__ __volatile__(
+        "\n661: sllx            %1, %2, %0\n"
+        "       srlx            %0, %3, %0\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sllx            %1, %4, %0\n"
+        "       srlx            %0, %5, %0\n"
+        "       .previous\n"
+        : "=r" (ret)
+        : "r" (pte_val(pte)),
+          "i" (21), "i" (21 + PAGE_SHIFT),
+          "i" (8), "i" (8 + PAGE_SHIFT));
+
+        return ret;
+}
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t prot)
+{
+        unsigned long mask, tmp;
+
+        /* SUN4U: 0x600307ffffffecb8 (negated == 0x9ffcf80000001347)
+         * SUN4V: 0x30ffffffffffee17 (negated == 0xcf000000000011e8)
+         *
+         * Even if we use negation tricks the result is still a 6
+         * instruction sequence, so don't try to play fancy and just
+         * do the most straightforward implementation.
+         *
+         * Note: We encode this into 3 sun4v 2-insn patch sequences.
+         */
+
+        __asm__ __volatile__(
+        "\n661: sethi           %%uhi(%2), %1\n"
+        "       sethi           %%hi(%2), %0\n"
+        "\n662: or              %1, %%ulo(%2), %1\n"
+        "       or              %0, %%lo(%2), %0\n"
+        "\n663: sllx            %1, 32, %1\n"
+        "       or              %0, %1, %0\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sethi           %%uhi(%3), %1\n"
+        "       sethi           %%hi(%3), %0\n"
+        "       .word           662b\n"
+        "       or              %1, %%ulo(%3), %1\n"
+        "       or              %0, %%lo(%3), %0\n"
+        "       .word           663b\n"
+        "       sllx            %1, 32, %1\n"
+        "       or              %0, %1, %0\n"
+        "       .previous\n"
+        : "=r" (mask), "=r" (tmp)
+        : "i" (_PAGE_PADDR_4U | _PAGE_MODIFIED_4U | _PAGE_ACCESSED_4U |
+               _PAGE_CP_4U | _PAGE_CV_4U | _PAGE_E_4U | _PAGE_PRESENT_4U |
+               _PAGE_SZBITS_4U),
+          "i" (_PAGE_PADDR_4V | _PAGE_MODIFIED_4V | _PAGE_ACCESSED_4V |
+               _PAGE_CP_4V | _PAGE_CV_4V | _PAGE_E_4V | _PAGE_PRESENT_4V |
+               _PAGE_SZBITS_4V));
+
+        return __pte((pte_val(pte) & mask) | (pgprot_val(prot) & ~mask));
+}
+
+static inline pte_t pgoff_to_pte(unsigned long off)
+{
+        off <<= PAGE_SHIFT;
+
+        __asm__ __volatile__(
+        "\n661: or              %0, %2, %0\n"
+        "       .section        .sun4v_1insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       or              %0, %3, %0\n"
+        "       .previous\n"
+        : "=r" (off)
+        : "0" (off), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V));
+
+        return __pte(off);
+}
+
+static inline pgprot_t pgprot_noncached(pgprot_t prot)
+{
+        unsigned long val = pgprot_val(prot);
+
+        __asm__ __volatile__(
+        "\n661: andn            %0, %2, %0\n"
+        "       or              %0, %3, %0\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       andn            %0, %4, %0\n"
+        "       or              %0, %5, %0\n"
+        "       .previous\n"
+        : "=r" (val)
+        : "0" (val), "i" (_PAGE_CP_4U | _PAGE_CV_4U), "i" (_PAGE_E_4U),
+                     "i" (_PAGE_CP_4V | _PAGE_CV_4V), "i" (_PAGE_E_4V));
+
+        return __pgprot(val);
+}
+/* Various pieces of code check for platform support by ifdef testing
+ * on "pgprot_noncached".  That's broken and should be fixed, but for
+ * now...
+ */
+#define pgprot_noncached pgprot_noncached
+
+#ifdef CONFIG_HUGETLB_PAGE
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+        unsigned long mask;
+
+        __asm__ __volatile__(
+        "\n661: sethi           %%uhi(%1), %0\n"
+        "       sllx            %0, 32, %0\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       mov             %2, %0\n"
+        "       nop\n"
+        "       .previous\n"
+        : "=r" (mask)
+        : "i" (_PAGE_SZHUGE_4U), "i" (_PAGE_SZHUGE_4V));
+
+        return __pte(pte_val(pte) | mask);
+}
+#endif
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+        unsigned long val = pte_val(pte), tmp;
+
+        __asm__ __volatile__(
+        "\n661: or              %0, %3, %0\n"
+        "       nop\n"
+        "\n662: nop\n"
+        "       nop\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sethi           %%uhi(%4), %1\n"
+        "       sllx            %1, 32, %1\n"
+        "       .word           662b\n"
+        "       or              %1, %%lo(%4), %1\n"
+        "       or              %0, %1, %0\n"
+        "       .previous\n"
+        : "=r" (val), "=r" (tmp)
+        : "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
+          "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
+
+        return __pte(val);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+        unsigned long val = pte_val(pte), tmp;
+
+        __asm__ __volatile__(
+        "\n661: andn            %0, %3, %0\n"
+        "       nop\n"
+        "\n662: nop\n"
+        "       nop\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sethi           %%uhi(%4), %1\n"
+        "       sllx            %1, 32, %1\n"
+        "       .word           662b\n"
+        "       or              %1, %%lo(%4), %1\n"
+        "       andn            %0, %1, %0\n"
+        "       .previous\n"
+        : "=r" (val), "=r" (tmp)
+        : "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
+          "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
+
+        return __pte(val);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+        unsigned long val = pte_val(pte), mask;
+
+        __asm__ __volatile__(
+        "\n661: mov             %1, %0\n"
+        "       nop\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sethi           %%uhi(%2), %0\n"
+        "       sllx            %0, 32, %0\n"
+        "       .previous\n"
+        : "=r" (mask)
+        : "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
+
+        return __pte(val | mask);
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+        unsigned long val = pte_val(pte), tmp;
+
+        __asm__ __volatile__(
+        "\n661: andn            %0, %3, %0\n"
+        "       nop\n"
+        "\n662: nop\n"
+        "       nop\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sethi           %%uhi(%4), %1\n"
+        "       sllx            %1, 32, %1\n"
+        "       .word           662b\n"
+        "       or              %1, %%lo(%4), %1\n"
+        "       andn            %0, %1, %0\n"
+        "       .previous\n"
+        : "=r" (val), "=r" (tmp)
+        : "0" (val), "i" (_PAGE_WRITE_4U | _PAGE_W_4U),
+          "i" (_PAGE_WRITE_4V | _PAGE_W_4V));
+
+        return __pte(val);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+        unsigned long mask;
+
+        __asm__ __volatile__(
+        "\n661: mov             %1, %0\n"
+        "       nop\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sethi           %%uhi(%2), %0\n"
+        "       sllx            %0, 32, %0\n"
+        "       .previous\n"
+        : "=r" (mask)
+        : "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+        mask |= _PAGE_R;
+
+        return __pte(pte_val(pte) & ~mask);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+        unsigned long mask;
+
+        __asm__ __volatile__(
+        "\n661: mov             %1, %0\n"
+        "       nop\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sethi           %%uhi(%2), %0\n"
+        "       sllx            %0, 32, %0\n"
+        "       .previous\n"
+        : "=r" (mask)
+        : "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+        mask |= _PAGE_R;
+
+        return __pte(pte_val(pte) | mask);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+        return pte;
+}
+
+static inline unsigned long pte_young(pte_t pte)
+{
+        unsigned long mask;
+
+        __asm__ __volatile__(
+        "\n661: mov             %1, %0\n"
+        "       nop\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sethi           %%uhi(%2), %0\n"
+        "       sllx            %0, 32, %0\n"
+        "       .previous\n"
+        : "=r" (mask)
+        : "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+        return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_dirty(pte_t pte)
+{
+        unsigned long mask;
+
+        __asm__ __volatile__(
+        "\n661: mov             %1, %0\n"
+        "       nop\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sethi           %%uhi(%2), %0\n"
+        "       sllx            %0, 32, %0\n"
+        "       .previous\n"
+        : "=r" (mask)
+        : "i" (_PAGE_MODIFIED_4U), "i" (_PAGE_MODIFIED_4V));
+
+        return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_write(pte_t pte)
+{
+        unsigned long mask;
+
+        __asm__ __volatile__(
+        "\n661: mov             %1, %0\n"
+        "       nop\n"
+        "       .section        .sun4v_2insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       sethi           %%uhi(%2), %0\n"
+        "       sllx            %0, 32, %0\n"
+        "       .previous\n"
+        : "=r" (mask)
+        : "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
+
+        return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_exec(pte_t pte)
+{
+        unsigned long mask;
+
+        __asm__ __volatile__(
+        "\n661: sethi           %%hi(%1), %0\n"
+        "       .section        .sun4v_1insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       mov             %2, %0\n"
+        "       .previous\n"
+        : "=r" (mask)
+        : "i" (_PAGE_EXEC_4U), "i" (_PAGE_EXEC_4V));
+
+        return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_file(pte_t pte)
+{
+        unsigned long val = pte_val(pte);
+
+        __asm__ __volatile__(
+        "\n661: and             %0, %2, %0\n"
+        "       .section        .sun4v_1insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       and             %0, %3, %0\n"
+        "       .previous\n"
+        : "=r" (val)
+        : "0" (val), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V));
+
+        return val;
+}
+
+static inline unsigned long pte_present(pte_t pte)
+{
+        unsigned long val = pte_val(pte);
+
+        __asm__ __volatile__(
+        "\n661: and             %0, %2, %0\n"
+        "       .section        .sun4v_1insn_patch, \"ax\"\n"
+        "       .word           661b\n"
+        "       and             %0, %3, %0\n"
+        "       .previous\n"
+        : "=r" (val)
+        : "0" (val), "i" (_PAGE_PRESENT_4U), "i" (_PAGE_PRESENT_4V));
+
+        return val;
+}
+
+static inline int pte_special(pte_t pte)
+{
+        return 0;
+}
+
+#define pmd_set(pmdp, ptep)     \
+        (pmd_val(*(pmdp)) = (__pa((unsigned long) (ptep)) >> 11UL))
+#define pud_set(pudp, pmdp)     \
+        (pud_val(*(pudp)) = (__pa((unsigned long) (pmdp)) >> 11UL))
+#define __pmd_page(pmd)         \
+        ((unsigned long) __va((((unsigned long)pmd_val(pmd))<<11UL)))
+#define pmd_page(pmd)                   virt_to_page((void *)__pmd_page(pmd))
+#define pud_page_vaddr(pud)             \
+        ((unsigned long) __va((((unsigned long)pud_val(pud))<<11UL)))
+#define pud_page(pud)                   virt_to_page((void *)pud_page_vaddr(pud))
+#define pmd_none(pmd)                   (!pmd_val(pmd))
+#define pmd_bad(pmd)                    (0)
+#define pmd_present(pmd)                (pmd_val(pmd) != 0U)
+#define pmd_clear(pmdp)                 (pmd_val(*(pmdp)) = 0U)
+#define pud_none(pud)                   (!pud_val(pud))
+#define pud_bad(pud)                    (0)
+#define pud_present(pud)                (pud_val(pud) != 0U)
+#define pud_clear(pudp)                 (pud_val(*(pudp)) = 0U)
+
+/* Same in both SUN4V and SUN4U.  */
+#define pte_none(pte)                   (!pte_val(pte))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)      (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pudp, address)       \
+        ((pmd_t *) pud_page_vaddr(*(pudp)) + \
+         (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(dir, address) \
+        ((pte_t *) __pmd_page(*(dir)) + \
+         ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+#define pte_offset_kernel               pte_index
+#define pte_offset_map                  pte_index
+#define pte_offset_map_nested           pte_index
+#define pte_unmap(pte)                  do { } while (0)
+#define pte_unmap_nested(pte)           do { } while (0)
+
+/* Actual page table PTE updates.  */
+extern void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig);
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+{
+        pte_t orig = *ptep;
+
+        *ptep = pte;
+
+        /* It is more efficient to let flush_tlb_kernel_range()
+         * handle init_mm tlb flushes.
+         *
+         * SUN4V NOTE: _PAGE_VALID is the same value in both the SUN4U
+         *             and SUN4V pte layout, so this inline test is fine.
+         */
+        if (likely(mm != &init_mm) && (pte_val(orig) & _PAGE_VALID))
+                tlb_batch_add(mm, addr, ptep, orig);
+}
+
+#define pte_clear(mm,addr,ptep)         \
+        set_pte_at((mm), (addr), (ptep), __pte(0UL))
+
+#ifdef DCACHE_ALIASING_POSSIBLE
+#define __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr)                         \
+({                                                                      \
+        pte_t newpte = (pte);                                           \
+        if (tlb_type != hypervisor && pte_present(pte)) {               \
+                unsigned long this_pfn = pte_pfn(pte);                  \
+                                                                        \
+                if (pfn_valid(this_pfn) &&                              \
+                    (((old_addr) ^ (new_addr)) & (1 << 13)))            \
+                        flush_dcache_page_all(current->mm,              \
+                                              pfn_to_page(this_pfn));   \
+        }                                                               \
+        newpte;                                                         \
+})
+#endif
+
+extern pgd_t swapper_pg_dir[2048];
+extern pmd_t swapper_low_pmd_dir[2048];
+
+extern void paging_init(void);
+extern unsigned long find_ecache_flush_span(unsigned long size);
+
+/* These do nothing with the way I have things setup. */
+#define mmu_lockarea(vaddr, len)                (vaddr)
+#define mmu_unlockarea(vaddr, len)              do { } while(0)
+
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+/* Encode and de-code a swap entry */
+#define __swp_type(entry)       (((entry).val >> PAGE_SHIFT) & 0xffUL)
+#define __swp_offset(entry)     ((entry).val >> (PAGE_SHIFT + 8UL))
+#define __swp_entry(type, offset)       \
+        ( (swp_entry_t) \
+          { \
+                (((long)(type) << PAGE_SHIFT) | \
+                 ((long)(offset) << (PAGE_SHIFT + 8UL))) \
+          } )
+#define __pte_to_swp_entry(pte)         ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)           ((pte_t) { (x).val })
+
+/* File offset in PTE support. */
+extern unsigned long pte_file(pte_t);
+#define pte_to_pgoff(pte)       (pte_val(pte) >> PAGE_SHIFT)
+extern pte_t pgoff_to_pte(unsigned long);
+#define PTE_FILE_MAX_BITS       (64UL - PAGE_SHIFT - 1UL)
+
+extern unsigned long *sparc64_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr)   \
+        (test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
+
+extern int page_in_phys_avail(unsigned long paddr);
+
+extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
+                               unsigned long pfn,
+                               unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)      (pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)                (pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)                    (pfn & 0x0fffffffffffffffUL)
+
+#include <asm-generic/pgtable.h>
+
+/* We provide our own get_unmapped_area to cope with VA holes and
+ * SHM area cache aliasing for userland.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+/* We provide a special get_unmapped_area for framebuffer mmaps to try and use
+ * the largest alignment possible such that larget PTEs can be used.
+ */
+extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
+                                          unsigned long, unsigned long,
+                                          unsigned long);
+#define HAVE_ARCH_FB_UNMAPPED_AREA
+
+extern void pgtable_cache_init(void);
+extern void sun4v_register_fault_status(void);
+extern void sun4v_ktsb_register(void);
+extern void __init cheetah_ecache_flush_init(void);
+extern void sun4v_patch_tlb_handlers(void);
+
+extern unsigned long cmdline_memory_size;
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC64_PGTABLE_H) */
diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
new file mode 100644
index 000000000000..808555fc1d58
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsrmmu.h
@@ -0,0 +1,298 @@
+/*
+ * pgtsrmmu.h:  SRMMU page table defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PGTSRMMU_H
+#define _SPARC_PGTSRMMU_H
+
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>    /* TI_UWINMASK for WINDOW_FLUSH */
+#endif
+
+/* Number of contexts is implementation-dependent; 64k is the most we support */
+#define SRMMU_MAX_CONTEXTS      65536
+
+/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
+#define SRMMU_REAL_PMD_SHIFT            18
+#define SRMMU_REAL_PMD_SIZE             (1UL << SRMMU_REAL_PMD_SHIFT)
+#define SRMMU_REAL_PMD_MASK             (~(SRMMU_REAL_PMD_SIZE-1))
+#define SRMMU_REAL_PMD_ALIGN(__addr)    (((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SRMMU_PGDIR_SHIFT       24
+#define SRMMU_PGDIR_SIZE        (1UL << SRMMU_PGDIR_SHIFT)
+#define SRMMU_PGDIR_MASK        (~(SRMMU_PGDIR_SIZE-1))
+#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
+
+#define SRMMU_REAL_PTRS_PER_PTE 64
+#define SRMMU_REAL_PTRS_PER_PMD 64
+#define SRMMU_PTRS_PER_PGD      256
+
+#define SRMMU_REAL_PTE_TABLE_SIZE       (SRMMU_REAL_PTRS_PER_PTE*4)
+#define SRMMU_PMD_TABLE_SIZE            (SRMMU_REAL_PTRS_PER_PMD*4)
+#define SRMMU_PGD_TABLE_SIZE            (SRMMU_PTRS_PER_PGD*4)
+
+/*
+ * To support pagetables in highmem, Linux introduces APIs which
+ * return struct page* and generally manipulate page tables when
+ * they are not mapped into kernel space. Our hardware page tables
+ * are smaller than pages. We lump hardware tabes into big, page sized
+ * software tables.
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table entry
+ * can map, and our pmd_t is 16 times larger than normal.  The values which
+ * were once defined here are now generic for 4c and srmmu, so they're
+ * found in pgtable.h.
+ */
+#define SRMMU_PTRS_PER_PMD      4
+
+/* Definition of the values in the ET field of PTD's and PTE's */
+#define SRMMU_ET_MASK         0x3
+#define SRMMU_ET_INVALID      0x0
+#define SRMMU_ET_PTD          0x1
+#define SRMMU_ET_PTE          0x2
+#define SRMMU_ET_REPTE        0x3 /* AIEEE, SuperSparc II reverse endian page! */
+
+/* Physical page extraction from PTP's and PTE's. */
+#define SRMMU_CTX_PMASK    0xfffffff0
+#define SRMMU_PTD_PMASK    0xfffffff0
+#define SRMMU_PTE_PMASK    0xffffff00
+
+/* The pte non-page bits.  Some notes:
+ * 1) cache, dirty, valid, and ref are frobbable
+ *    for both supervisor and user pages.
+ * 2) exec and write will only give the desired effect
+ *    on user pages
+ * 3) use priv and priv_readonly for changing the
+ *    characteristics of supervisor ptes
+ */
+#define SRMMU_CACHE        0x80
+#define SRMMU_DIRTY        0x40
+#define SRMMU_REF          0x20
+#define SRMMU_NOREAD       0x10
+#define SRMMU_EXEC         0x08
+#define SRMMU_WRITE        0x04
+#define SRMMU_VALID        0x02 /* SRMMU_ET_PTE */
+#define SRMMU_PRIV         0x1c
+#define SRMMU_PRIV_RDONLY  0x18
+
+#define SRMMU_FILE         0x40 /* Implemented in software */
+
+#define SRMMU_PTE_FILE_SHIFT     8      /* == 32-PTE_FILE_MAX_BITS */
+
+#define SRMMU_CHG_MASK    (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
+
+/* SRMMU swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * oooooooooooooooooootttttRRRRRRRR
+ * fedcba9876543210fedcba9876543210
+ *
+ * The bottom 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SRMMU_SWP_TYPE_MASK     0x1f
+#define SRMMU_SWP_TYPE_SHIFT    SRMMU_PTE_FILE_SHIFT
+#define SRMMU_SWP_OFF_MASK      0x7ffff
+#define SRMMU_SWP_OFF_SHIFT     (SRMMU_PTE_FILE_SHIFT + 5)
+
+/* Some day I will implement true fine grained access bits for
+ * user pages because the SRMMU gives us the capabilities to
+ * enforce all the protection levels that vma's can have.
+ * XXX But for now...
+ */
+#define SRMMU_PAGE_NONE    __pgprot(SRMMU_CACHE | \
+                                    SRMMU_PRIV | SRMMU_REF)
+#define SRMMU_PAGE_SHARED  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+                                    SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
+#define SRMMU_PAGE_COPY    __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+                                    SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_RDONLY  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+                                    SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_KERNEL  __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
+                                    SRMMU_DIRTY | SRMMU_REF)
+
+/* SRMMU Register addresses in ASI 0x4.  These are valid for all
+ * current SRMMU implementations that exist.
+ */
+#define SRMMU_CTRL_REG           0x00000000
+#define SRMMU_CTXTBL_PTR         0x00000100
+#define SRMMU_CTX_REG            0x00000200
+#define SRMMU_FAULT_STATUS       0x00000300
+#define SRMMU_FAULT_ADDR         0x00000400
+
+#define WINDOW_FLUSH(tmp1, tmp2)                                        \
+        mov     0, tmp1;                                                \
+98:     ld      [%g6 + TI_UWINMASK], tmp2;                              \
+        orcc    %g0, tmp2, %g0;                                         \
+        add     tmp1, 1, tmp1;                                          \
+        bne     98b;                                                    \
+         save   %sp, -64, %sp;                                          \
+99:     subcc   tmp1, 1, tmp1;                                          \
+        bne     99b;                                                    \
+         restore %g0, %g0, %g0;
+
+#ifndef __ASSEMBLY__
+
+/* This makes sense. Honest it does - Anton */
+/* XXX Yes but it's ugly as sin.  FIXME. -KMW */
+extern void *srmmu_nocache_pool;
+#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
+#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
+#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
+
+/* Accessing the MMU control register. */
+static inline unsigned int srmmu_get_mmureg(void)
+{
+        unsigned int retval;
+        __asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+                             "=r" (retval) :
+                             "i" (ASI_M_MMUREGS));
+        return retval;
+}
+
+static inline void srmmu_set_mmureg(unsigned long regval)
+{
+        __asm__ __volatile__("sta %0, [%%g0] %1\n\t" : :
+                             "r" (regval), "i" (ASI_M_MMUREGS) : "memory");
+
+}
+
+static inline void srmmu_set_ctable_ptr(unsigned long paddr)
+{
+        paddr = ((paddr >> 4) & SRMMU_CTX_PMASK);
+        __asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+                             "r" (paddr), "r" (SRMMU_CTXTBL_PTR),
+                             "i" (ASI_M_MMUREGS) :
+                             "memory");
+}
+
+static inline unsigned long srmmu_get_ctable_ptr(void)
+{
+        unsigned int retval;
+
+        __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+                             "=r" (retval) :
+                             "r" (SRMMU_CTXTBL_PTR),
+                             "i" (ASI_M_MMUREGS));
+        return (retval & SRMMU_CTX_PMASK) << 4;
+}
+
+static inline void srmmu_set_context(int context)
+{
+        __asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+                             "r" (context), "r" (SRMMU_CTX_REG),
+                             "i" (ASI_M_MMUREGS) : "memory");
+}
+
+static inline int srmmu_get_context(void)
+{
+        register int retval;
+        __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+                             "=r" (retval) :
+                             "r" (SRMMU_CTX_REG),
+                             "i" (ASI_M_MMUREGS));
+        return retval;
+}
+
+static inline unsigned int srmmu_get_fstatus(void)
+{
+        unsigned int retval;
+
+        __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+                             "=r" (retval) :
+                             "r" (SRMMU_FAULT_STATUS), "i" (ASI_M_MMUREGS));
+        return retval;
+}
+
+static inline unsigned int srmmu_get_faddr(void)
+{
+        unsigned int retval;
+
+        __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+                             "=r" (retval) :
+                             "r" (SRMMU_FAULT_ADDR), "i" (ASI_M_MMUREGS));
+        return retval;
+}
+
+/* This is guaranteed on all SRMMU's. */
+static inline void srmmu_flush_whole_tlb(void)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+                             "r" (0x400),        /* Flush entire TLB!! */
+                             "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+/* These flush types are not available on all chips... */
+static inline void srmmu_flush_tlb_ctx(void)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+                             "r" (0x300),        /* Flush TLB ctx.. */
+                             "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline void srmmu_flush_tlb_region(unsigned long addr)
+{
+        addr &= SRMMU_PGDIR_MASK;
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+                             "r" (addr | 0x200), /* Flush TLB region.. */
+                             "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+
+static inline void srmmu_flush_tlb_segment(unsigned long addr)
+{
+        addr &= SRMMU_REAL_PMD_MASK;
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+                             "r" (addr | 0x100), /* Flush TLB segment.. */
+                             "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline void srmmu_flush_tlb_page(unsigned long page)
+{
+        page &= PAGE_MASK;
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+                             "r" (page),        /* Flush TLB page.. */
+                             "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline unsigned long srmmu_hwprobe(unsigned long vaddr)
+{
+        unsigned long retval;
+
+        vaddr &= PAGE_MASK;
+        __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+                             "=r" (retval) :
+                             "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+
+        return retval;
+}
+
+static inline int
+srmmu_get_pte (unsigned long addr)
+{
+        register unsigned long entry;
+        
+        __asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" :
+                                "=r" (entry):
+                                "r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE));
+        return entry;
+}
+
+extern unsigned long (*srmmu_read_physical)(unsigned long paddr);
+extern void (*srmmu_write_physical)(unsigned long paddr, unsigned long word);
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSRMMU_H) */
diff --git a/arch/sparc/include/asm/pgtsun4.h b/arch/sparc/include/asm/pgtsun4.h
new file mode 100644
index 000000000000..5a0d661fb82e
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsun4.h
@@ -0,0 +1,171 @@
+/*
+ * pgtsun4.h:  Sun4 specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT       23
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT       23
+#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT       18
+#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 19 bit PFN on sun4 */
+#define SUN4C_PFN_MASK 0x7ffff
+ 
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE    1024
+#define SUN4C_PTRS_PER_PMD    1
+#define SUN4C_PTRS_PER_PGD    1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID        0x80000000
+#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
+#define _SUN4C_PAGE_DIRTY        0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
+#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
+#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
+#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
+#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
+#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
+
+#define _SUN4C_READABLE         (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+                                 _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE        (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+                                 _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK    (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE         __pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED       __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+                                         _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY         __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY     __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL       __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+                                         _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK     0x1f
+#define SUN4C_SWP_OFF_MASK      0x7ffff
+#define SUN4C_SWP_OFF_SHIFT     5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+        unsigned long sync_err;
+
+        __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+                             "=r" (sync_err) :
+                             "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+        return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+        unsigned long sync_addr;
+
+        __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+                             "=r" (sync_addr) :
+                             "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+        return sync_addr;
+}
+
+/* SUN4 pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" : 
+                       "=r" (entry) :
+                       "r" (addr), "i" (ASI_SEGMAP));
+  return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : :
+                       "r" (addr), "r" (entry),
+                       "i" (ASI_SEGMAP)
+                       : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
+                       "=r" (entry) :
+                       "r" (addr), "i" (ASI_PTE));
+  return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+                       "r" (addr), 
+                       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+                       : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+  register int ctx;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+                       "=r" (ctx) :
+                       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+  return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+                       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+                       : "memory");
+
+  return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4_H) */
diff --git a/arch/sparc/include/asm/pgtsun4c.h b/arch/sparc/include/asm/pgtsun4c.h
new file mode 100644
index 000000000000..aeb25e912179
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsun4c.h
@@ -0,0 +1,172 @@
+/*
+ * pgtsun4c.h:  Sun4c specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT       22
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT       22
+#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT       18
+#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 16 bit PFN on sun4c */
+#define SUN4C_PFN_MASK 0xffff
+
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE    1024
+#define SUN4C_PTRS_PER_PMD    1
+#define SUN4C_PTRS_PER_PGD    1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID        0x80000000
+#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
+#define _SUN4C_PAGE_DIRTY        0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
+#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
+#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
+#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
+#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
+#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
+
+#define _SUN4C_READABLE         (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+                                 _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE        (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+                                 _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK    (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE         __pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED       __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+                                         _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY         __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY     __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL       __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+                                         _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK     0x1f
+#define SUN4C_SWP_OFF_MASK      0x7ffff
+#define SUN4C_SWP_OFF_SHIFT     5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+        unsigned long sync_err;
+
+        __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+                             "=r" (sync_err) :
+                             "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+        return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+        unsigned long sync_addr;
+
+        __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+                             "=r" (sync_addr) :
+                             "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+        return sync_addr;
+}
+
+/* SUN4C pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : 
+                       "=r" (entry) :
+                       "r" (addr), "i" (ASI_SEGMAP));
+
+  return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+
+  __asm__ __volatile__("\n\tstba %1, [%0] %2; nop; nop; nop;\n\t" : :
+                       "r" (addr), "r" (entry),
+                       "i" (ASI_SEGMAP)
+                       : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
+                       "=r" (entry) :
+                       "r" (addr), "i" (ASI_PTE));
+  return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+                       "r" (addr), 
+                       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+                       : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+  register int ctx;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+                       "=r" (ctx) :
+                       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+  return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+                       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+                       : "memory");
+
+  return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4C_H) */
diff --git a/arch/sparc/include/asm/pil.h b/arch/sparc/include/asm/pil.h
new file mode 100644
index 000000000000..71819bb943fc
--- /dev/null
+++ b/arch/sparc/include/asm/pil.h
@@ -0,0 +1,22 @@
+#ifndef _SPARC64_PIL_H
+#define _SPARC64_PIL_H
+
+/* To avoid some locking problems, we hard allocate certain PILs
+ * for SMP cross call messages that must do a etrap/rtrap.
+ *
+ * A local_irq_disable() does not block the cross call delivery, so
+ * when SMP locking is an issue we reschedule the event into a PIL
+ * interrupt which is blocked by local_irq_disable().
+ *
+ * In fact any XCALL which has to etrap/rtrap has a problem because
+ * it is difficult to prevent rtrap from running BH's, and that would
+ * need to be done if the XCALL arrived while %pil==15.
+ */
+#define PIL_SMP_CALL_FUNC       1
+#define PIL_SMP_RECEIVE_SIGNAL  2
+#define PIL_SMP_CAPTURE         3
+#define PIL_SMP_CTX_NEW_VERSION 4
+#define PIL_DEVICE_IRQ          5
+#define PIL_SMP_CALL_FUNC_SNGL  6
+
+#endif /* !(_SPARC64_PIL_H) */
diff --git a/arch/sparc/include/asm/poll.h b/arch/sparc/include/asm/poll.h
new file mode 100644
index 000000000000..091d3ad2e830
--- /dev/null
+++ b/arch/sparc/include/asm/poll.h
@@ -0,0 +1,12 @@
+#ifndef __SPARC_POLL_H
+#define __SPARC_POLL_H
+
+#define POLLWRNORM      POLLOUT
+#define POLLWRBAND      256
+#define POLLMSG         512
+#define POLLREMOVE      1024
+#define POLLRDHUP       2048
+
+#include <asm-generic/poll.h>
+
+#endif
diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h
new file mode 100644
index 000000000000..03a0e091a884
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_POSIX_TYPES_H
+#define ___ASM_SPARC_POSIX_TYPES_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/posix_types_64.h>
+#else
+#include <asm/posix_types_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/posix_types_32.h b/arch/sparc/include/asm/posix_types_32.h
new file mode 100644
index 000000000000..6bb6eb1ca0f2
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types_32.h
@@ -0,0 +1,118 @@
+#ifndef __ARCH_SPARC_POSIX_TYPES_H
+#define __ARCH_SPARC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int           __kernel_size_t;
+typedef int                    __kernel_ssize_t;
+typedef long int               __kernel_ptrdiff_t;
+typedef long                   __kernel_time_t;
+typedef long                   __kernel_suseconds_t;
+typedef long                   __kernel_clock_t;
+typedef int                    __kernel_pid_t;
+typedef unsigned short         __kernel_ipc_pid_t;
+typedef unsigned short         __kernel_uid_t;
+typedef unsigned short         __kernel_gid_t;
+typedef unsigned long          __kernel_ino_t;
+typedef unsigned short         __kernel_mode_t;
+typedef unsigned short         __kernel_umode_t;
+typedef short                  __kernel_nlink_t;
+typedef long                   __kernel_daddr_t;
+typedef long                   __kernel_off_t;
+typedef char *                 __kernel_caddr_t;
+typedef unsigned short         __kernel_uid16_t;
+typedef unsigned short         __kernel_gid16_t;
+typedef unsigned int           __kernel_uid32_t;
+typedef unsigned int           __kernel_gid32_t;
+typedef unsigned short         __kernel_old_uid_t;
+typedef unsigned short         __kernel_old_gid_t;
+typedef unsigned short         __kernel_old_dev_t;
+typedef int                    __kernel_clockid_t;
+typedef int                    __kernel_timer_t;
+
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+
+typedef struct {
+        int     val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+        unsigned long _tmp = fd / __NFDBITS;
+        unsigned long _rem = fd % __NFDBITS;
+        fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+        unsigned long _tmp = fd / __NFDBITS;
+        unsigned long _rem = fd % __NFDBITS;
+        fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+        unsigned long _tmp = fd / __NFDBITS;
+        unsigned long _rem = fd % __NFDBITS;
+        return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *p)
+{
+        unsigned long *tmp = p->fds_bits;
+        int i;
+
+        if (__builtin_constant_p(__FDSET_LONGS)) {
+                switch (__FDSET_LONGS) {
+                        case 32:
+                          tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+                          tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+                          tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+                          tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+                          tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+                          tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+                          tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+                          tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+                          return;
+                        case 16:
+                          tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+                          tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+                          tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+                          tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+                          return;
+                        case 8:
+                          tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+                          tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+                          return;
+                        case 4:
+                          tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+                          return;
+                }
+        }
+        i = __FDSET_LONGS;
+        while (i) {
+                i--;
+                *tmp = 0;
+                tmp++;
+        }
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */
diff --git a/arch/sparc/include/asm/posix_types_64.h b/arch/sparc/include/asm/posix_types_64.h
new file mode 100644
index 000000000000..ba8f93295763
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types_64.h
@@ -0,0 +1,122 @@
+#ifndef __ARCH_SPARC64_POSIX_TYPES_H
+#define __ARCH_SPARC64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long          __kernel_size_t;
+typedef long                   __kernel_ssize_t;
+typedef long                   __kernel_ptrdiff_t;
+typedef long                   __kernel_time_t;
+typedef long                   __kernel_clock_t;
+typedef int                    __kernel_pid_t;
+typedef int                    __kernel_ipc_pid_t;
+typedef unsigned int           __kernel_uid_t;
+typedef unsigned int           __kernel_gid_t;
+typedef unsigned long          __kernel_ino_t;
+typedef unsigned int           __kernel_mode_t;
+typedef unsigned short         __kernel_umode_t;
+typedef unsigned int           __kernel_nlink_t;
+typedef int                    __kernel_daddr_t;
+typedef long                   __kernel_off_t;
+typedef char *                 __kernel_caddr_t;
+typedef unsigned short         __kernel_uid16_t;
+typedef unsigned short         __kernel_gid16_t;
+typedef int                    __kernel_clockid_t;
+typedef int                    __kernel_timer_t;
+
+typedef unsigned short         __kernel_old_uid_t;
+typedef unsigned short         __kernel_old_gid_t;
+typedef __kernel_uid_t         __kernel_uid32_t;
+typedef __kernel_gid_t         __kernel_gid32_t;
+
+typedef unsigned int           __kernel_old_dev_t;
+
+/* Note this piece of asymmetry from the v9 ABI.  */
+typedef int                    __kernel_suseconds_t;
+
+#ifdef __GNUC__
+typedef long long              __kernel_loff_t;
+#endif
+
+typedef struct {
+        int     val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+        unsigned long _tmp = fd / __NFDBITS;
+        unsigned long _rem = fd % __NFDBITS;
+        fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+        unsigned long _tmp = fd / __NFDBITS;
+        unsigned long _rem = fd % __NFDBITS;
+        fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+        unsigned long _tmp = fd / __NFDBITS;
+        unsigned long _rem = fd % __NFDBITS;
+        return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *p)
+{
+        unsigned long *tmp = p->fds_bits;
+        int i;
+
+        if (__builtin_constant_p(__FDSET_LONGS)) {
+                switch (__FDSET_LONGS) {
+                        case 32:
+                          tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+                          tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+                          tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+                          tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+                          tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+                          tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+                          tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+                          tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+                          return;
+                        case 16:
+                          tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+                          tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+                          tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+                          tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+                          return;
+                        case 8:
+                          tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+                          tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+                          return;
+                        case 4:
+                          tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+                          return;
+                }
+        }
+        i = __FDSET_LONGS;
+        while (i) {
+                i--;
+                *tmp = 0;
+                tmp++;
+        }
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* !(__ARCH_SPARC64_POSIX_TYPES_H) */
diff --git a/arch/sparc/include/asm/processor.h b/arch/sparc/include/asm/processor.h
new file mode 100644
index 000000000000..9da9646bf6c6
--- /dev/null
+++ b/arch/sparc/include/asm/processor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PROCESSOR_H
+#define ___ASM_SPARC_PROCESSOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/processor_64.h>
+#else
+#include <asm/processor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/processor_32.h b/arch/sparc/include/asm/processor_32.h
new file mode 100644
index 000000000000..2ae67a2e7f3a
--- /dev/null
+++ b/arch/sparc/include/asm/processor_32.h
@@ -0,0 +1,129 @@
+/* include/asm/processor.h
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_PROCESSOR_H
+#define __ASM_SPARC_PROCESSOR_H
+
+/*
+ * Sparc32 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
+
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/head.h>
+#include <asm/signal.h>
+#include <asm/btfixup.h>
+#include <asm/page.h>
+
+/*
+ * The sparc has no problems with write protection
+ */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too...
+ * That one page is used to protect kernel from intruders, so that
+ * we can make our access_ok test faster
+ */
+#define TASK_SIZE       PAGE_OFFSET
+#ifdef __KERNEL__
+#define STACK_TOP       (PAGE_OFFSET - PAGE_SIZE)
+#define STACK_TOP_MAX   STACK_TOP
+#endif /* __KERNEL__ */
+
+struct task_struct;
+
+#ifdef __KERNEL__
+struct fpq {
+        unsigned long *insn_addr;
+        unsigned long insn;
+};
+#endif
+
+typedef struct {
+        int seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+struct thread_struct {
+        struct pt_regs *kregs;
+        unsigned int _pad1;
+
+        /* Special child fork kpsr/kwim values. */
+        unsigned long fork_kpsr __attribute__ ((aligned (8)));
+        unsigned long fork_kwim;
+
+        /* Floating point regs */
+        unsigned long   float_regs[32] __attribute__ ((aligned (8)));
+        unsigned long   fsr;
+        unsigned long   fpqdepth;
+        struct fpq      fpqueue[16];
+        unsigned long flags;
+        mm_segment_t current_ds;
+};
+
+#define SPARC_FLAG_KTHREAD      0x1    /* task is a kernel thread */
+#define SPARC_FLAG_UNALIGNED    0x2    /* is allowed to do unaligned accesses */
+
+#define INIT_THREAD  { \
+        .flags = SPARC_FLAG_KTHREAD, \
+        .current_ds = KERNEL_DS, \
+}
+
+/* Return saved PC of a blocked thread. */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/* Do necessary setup to start up a newly executed thread. */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+                                    unsigned long sp)
+{
+        register unsigned long zero asm("g1");
+
+        regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
+        regs->pc = ((pc & (~3)) - 4);
+        regs->npc = regs->pc + 4;
+        regs->y = 0;
+        zero = 0;
+        __asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x08]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x10]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x18]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x20]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x28]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x30]\n\t"
+                             "st\t%1, [%0 + %3 + 0x38]\n\t"
+                             "st\t%%g0, [%0 + %3 + 0x3c]"
+                             : /* no outputs */
+                             : "r" (regs),
+                               "r" (sp - sizeof(struct reg_window)),
+                               "r" (zero),
+                               "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
+                             : "memory");
+}
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)             do { } while(0)
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)    do { } while (0)
+
+extern unsigned long get_wchan(struct task_struct *);
+
+#define task_pt_regs(tsk) ((tsk)->thread.kregs)
+#define KSTK_EIP(tsk)  ((tsk)->thread.kregs->pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.kregs->u_regs[UREG_FP])
+
+#ifdef __KERNEL__
+
+extern struct task_struct *last_task_used_math;
+
+#define cpu_relax()     barrier()
+
+#endif
+
+#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h
new file mode 100644
index 000000000000..137a6bd72fc8
--- /dev/null
+++ b/arch/sparc/include/asm/processor_64.h
@@ -0,0 +1,237 @@
+/*
+ * include/asm/processor.h
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC64_PROCESSOR_H
+#define __ASM_SPARC64_PROCESSOR_H
+
+/*
+ * Sparc64 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
+
+#include <asm/asi.h>
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/* The sparc has no problems with write protection */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/*
+ * User lives in his very own context, and cannot reference us. Note
+ * that TASK_SIZE is a misnomer, it really gives maximum user virtual
+ * address that the kernel will allocate out.
+ *
+ * XXX No longer using virtual page tables, kill this upper limit...
+ */
+#define VA_BITS         44
+#ifndef __ASSEMBLY__
+#define VPTE_SIZE       (1UL << (VA_BITS - PAGE_SHIFT + 3))
+#else
+#define VPTE_SIZE       (1 << (VA_BITS - PAGE_SHIFT + 3))
+#endif
+
+#define TASK_SIZE       ((unsigned long)-VPTE_SIZE)
+#define TASK_SIZE_OF(tsk) \
+        (test_tsk_thread_flag(tsk,TIF_32BIT) ? \
+         (1UL << 32UL) : TASK_SIZE)
+#ifdef __KERNEL__
+
+#define STACK_TOP32     ((1UL << 32UL) - PAGE_SIZE)
+#define STACK_TOP64     (0x0000080000000000UL - (1UL << 32UL))
+
+#define STACK_TOP       (test_thread_flag(TIF_32BIT) ? \
+                         STACK_TOP32 : STACK_TOP64)
+
+#define STACK_TOP_MAX   STACK_TOP64
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+        unsigned char seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+/* XXX This should die, everything can go into thread_info now. */
+struct thread_struct {
+#ifdef CONFIG_DEBUG_SPINLOCK
+        /* How many spinlocks held by this thread.
+         * Used with spin lock debugging to catch tasks
+         * sleeping illegally with locks held.
+         */
+        int smp_lock_count;
+        unsigned int smp_lock_pc;
+#else
+        int dummy; /* f'in gcc bug... */
+#endif
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+#define INIT_THREAD  {                  \
+        0,                              \
+}
+#else /* CONFIG_DEBUG_SPINLOCK */
+#define INIT_THREAD  {                                  \
+/* smp_lock_count, smp_lock_pc, */                      \
+   0,              0,                                   \
+}
+#endif /* !(CONFIG_DEBUG_SPINLOCK) */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* Return saved PC of a blocked thread. */
+struct task_struct;
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* On Uniprocessor, even in RMO processes see TSO semantics */
+#ifdef CONFIG_SMP
+#define TSTATE_INITIAL_MM       TSTATE_TSO
+#else
+#define TSTATE_INITIAL_MM       TSTATE_RMO
+#endif
+
+/* Do necessary setup to start up a newly executed thread. */
+#define start_thread(regs, pc, sp) \
+do { \
+        unsigned long __asi = ASI_PNF; \
+        regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \
+        regs->tpc = ((pc & (~3)) - 4); \
+        regs->tnpc = regs->tpc + 4; \
+        regs->y = 0; \
+        set_thread_wstate(1 << 3); \
+        if (current_thread_info()->utraps) { \
+                if (*(current_thread_info()->utraps) < 2) \
+                        kfree(current_thread_info()->utraps); \
+                else \
+                        (*(current_thread_info()->utraps))--; \
+                current_thread_info()->utraps = NULL; \
+        } \
+        __asm__ __volatile__( \
+        "stx            %%g0, [%0 + %2 + 0x00]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x08]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x10]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x18]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x20]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x28]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x30]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x38]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x40]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x48]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x50]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x58]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x60]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x68]\n\t" \
+        "stx            %1,   [%0 + %2 + 0x70]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x78]\n\t" \
+        "wrpr           %%g0, (1 << 3), %%wstate\n\t" \
+        : \
+        : "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \
+          "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+#define start_thread32(regs, pc, sp) \
+do { \
+        unsigned long __asi = ASI_PNF; \
+        pc &= 0x00000000ffffffffUL; \
+        sp &= 0x00000000ffffffffUL; \
+        regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \
+        regs->tpc = ((pc & (~3)) - 4); \
+        regs->tnpc = regs->tpc + 4; \
+        regs->y = 0; \
+        set_thread_wstate(2 << 3); \
+        if (current_thread_info()->utraps) { \
+                if (*(current_thread_info()->utraps) < 2) \
+                        kfree(current_thread_info()->utraps); \
+                else \
+                        (*(current_thread_info()->utraps))--; \
+                current_thread_info()->utraps = NULL; \
+        } \
+        __asm__ __volatile__( \
+        "stx            %%g0, [%0 + %2 + 0x00]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x08]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x10]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x18]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x20]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x28]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x30]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x38]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x40]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x48]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x50]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x58]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x60]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x68]\n\t" \
+        "stx            %1,   [%0 + %2 + 0x70]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x78]\n\t" \
+        "wrpr           %%g0, (2 << 3), %%wstate\n\t" \
+        : \
+        : "r" (regs), "r" (sp - sizeof(struct reg_window32)), \
+          "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)             do { } while (0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)    do { } while (0)
+
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long get_wchan(struct task_struct *task);
+
+#define task_pt_regs(tsk) (task_thread_info(tsk)->kregs)
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->tpc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
+
+#define cpu_relax()     barrier()
+
+/* Prefetch support.  This is tuned for UltraSPARC-III and later.
+ * UltraSPARC-I will treat these as nops, and UltraSPARC-II has
+ * a shallower prefetch queue than later chips.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+        /* We do not use the read prefetch mnemonic because that
+         * prefetches into the prefetch-cache which only is accessible
+         * by floating point operations in UltraSPARC-III and later.
+         * By contrast, "#one_write" prefetches into the L2 cache
+         * in shared state.
+         */
+        __asm__ __volatile__("prefetch [%0], #one_write"
+                             : /* no outputs */
+                             : "r" (x));
+}
+
+static inline void prefetchw(const void *x)
+{
+        /* The most optimal prefetch to use for writes is
+         * "#n_writes".  This brings the cacheline into the
+         * L2 cache in "owned" state.
+         */
+        __asm__ __volatile__("prefetch [%0], #n_writes"
+                             : /* no outputs */
+                             : "r" (x));
+}
+
+#define spin_lock_prefetch(x)   prefetchw(x)
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
new file mode 100644
index 000000000000..fd55522481cd
--- /dev/null
+++ b/arch/sparc/include/asm/prom.h
@@ -0,0 +1,108 @@
+#ifndef _SPARC_PROM_H
+#define _SPARC_PROM_H
+#ifdef __KERNEL__
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ * Updates for SPARC by David S. Miller
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <asm/atomic.h>
+
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 2
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
+
+#define of_compat_cmp(s1, s2, l)        strncmp((s1), (s2), (l))
+#define of_prop_cmp(s1, s2)             strcasecmp((s1), (s2))
+#define of_node_cmp(s1, s2)             strcmp((s1), (s2))
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+        char    *name;
+        int     length;
+        void    *value;
+        struct property *next;
+        unsigned long _flags;
+        unsigned int unique_id;
+};
+
+struct of_irq_controller;
+struct device_node {
+        const char      *name;
+        const char      *type;
+        phandle node;
+        char    *path_component_name;
+        char    *full_name;
+
+        struct  property *properties;
+        struct  property *deadprops; /* removed properties */
+        struct  device_node *parent;
+        struct  device_node *child;
+        struct  device_node *sibling;
+        struct  device_node *next;      /* next device of same type */
+        struct  device_node *allnext;   /* next in list of all nodes */
+        struct  proc_dir_entry *pde;    /* this node's proc directory */
+        struct  kref kref;
+        unsigned long _flags;
+        void    *data;
+        unsigned int unique_id;
+
+        struct of_irq_controller *irq_trans;
+};
+
+struct of_irq_controller {
+        unsigned int    (*irq_build)(struct device_node *, unsigned int, void *);
+        void            *data;
+};
+
+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+
+extern struct device_node *of_find_node_by_cpuid(int cpuid);
+extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
+extern int of_getintprop_default(struct device_node *np,
+                                 const char *name,
+                                 int def);
+extern int of_find_in_proplist(const char *list, const char *match, int len);
+#ifdef CONFIG_NUMA
+extern int of_node_to_nid(struct device_node *dp);
+#else
+#define of_node_to_nid(dp)      (-1)
+#endif
+
+extern void prom_build_devicetree(void);
+
+/* Dummy ref counting routines - to be implemented later */
+static inline struct device_node *of_node_get(struct device_node *node)
+{
+        return node;
+}
+static inline void of_node_put(struct device_node *node)
+{
+}
+
+/*
+ * NB:  This is here while we transition from using asm/prom.h
+ * to linux/of.h
+ */
+#include <linux/of.h>
+
+extern struct device_node *of_console_device;
+extern char *of_console_path;
+extern char *of_console_options;
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC_PROM_H */
diff --git a/arch/sparc/include/asm/psr.h b/arch/sparc/include/asm/psr.h
new file mode 100644
index 000000000000..b8c0e5f0a66b
--- /dev/null
+++ b/arch/sparc/include/asm/psr.h
@@ -0,0 +1,93 @@
+/*
+ * psr.h: This file holds the macros for masking off various parts of
+ *        the processor status register on the Sparc. This is valid
+ *        for Version 8. On the V9 this is renamed to the PSTATE
+ *        register and its members are accessed as fields like
+ *        PSTATE.PRIV for the current CPU privilege level.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __LINUX_SPARC_PSR_H
+#define __LINUX_SPARC_PSR_H
+
+/* The Sparc PSR fields are laid out as the following:
+ *
+ *  ------------------------------------------------------------------------
+ *  | impl  | vers  | icc   | resv  | EC | EF | PIL  | S | PS | ET |  CWP  |
+ *  | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6  | 5  |  4-0  |
+ *  ------------------------------------------------------------------------
+ */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+/* Get the %psr register. */
+static inline unsigned int get_psr(void)
+{
+        unsigned int psr;
+        __asm__ __volatile__(
+                "rd     %%psr, %0\n\t"
+                "nop\n\t"
+                "nop\n\t"
+                "nop\n\t"
+        : "=r" (psr)
+        : /* no inputs */
+        : "memory");
+
+        return psr;
+}
+
+static inline void put_psr(unsigned int new_psr)
+{
+        __asm__ __volatile__(
+                "wr     %0, 0x0, %%psr\n\t"
+                "nop\n\t"
+                "nop\n\t"
+                "nop\n\t"
+        : /* no outputs */
+        : "r" (new_psr)
+        : "memory", "cc");
+}
+
+/* Get the %fsr register.  Be careful, make sure the floating point
+ * enable bit is set in the %psr when you execute this or you will
+ * incur a trap.
+ */
+
+extern unsigned int fsr_storage;
+
+static inline unsigned int get_fsr(void)
+{
+        unsigned int fsr = 0;
+
+        __asm__ __volatile__(
+                "st     %%fsr, %1\n\t"
+                "ld     %1, %0\n\t"
+        : "=r" (fsr)
+        : "m" (fsr_storage));
+
+        return fsr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__LINUX_SPARC_PSR_H) */
diff --git a/arch/sparc/include/asm/psrcompat.h b/arch/sparc/include/asm/psrcompat.h
new file mode 100644
index 000000000000..44b6327dbbf5
--- /dev/null
+++ b/arch/sparc/include/asm/psrcompat.h
@@ -0,0 +1,45 @@
+#ifndef _SPARC64_PSRCOMPAT_H
+#define _SPARC64_PSRCOMPAT_H
+
+#include <asm/pstate.h>
+
+/* Old 32-bit PSR fields for the compatibility conversion code. */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#define PSR_V8PLUS  0xff000000         /* fake impl/ver, meaning a 64bit CPU is present */
+#define PSR_XCC     0x000f0000         /* if PSR_V8PLUS, this is %xcc */
+
+static inline unsigned int tstate_to_psr(unsigned long tstate)
+{
+        return ((tstate & TSTATE_CWP)                   |
+                PSR_S                                   |
+                ((tstate & TSTATE_ICC) >> 12)           |
+                ((tstate & TSTATE_XCC) >> 20)           |
+                ((tstate & TSTATE_SYSCALL) ? PSR_SYSCALL : 0) |
+                PSR_V8PLUS);
+}
+
+static inline unsigned long psr_to_tstate_icc(unsigned int psr)
+{
+        unsigned long tstate = ((unsigned long)(psr & PSR_ICC)) << 12;
+        if ((psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS)
+                tstate |= ((unsigned long)(psr & PSR_XCC)) << 20;
+        return tstate;
+}
+
+#endif /* !(_SPARC64_PSRCOMPAT_H) */
diff --git a/arch/sparc/include/asm/pstate.h b/arch/sparc/include/asm/pstate.h
new file mode 100644
index 000000000000..a26a53777bb0
--- /dev/null
+++ b/arch/sparc/include/asm/pstate.h
@@ -0,0 +1,91 @@
+#ifndef _SPARC64_PSTATE_H
+#define _SPARC64_PSTATE_H
+
+#include <linux/const.h>
+
+/* The V9 PSTATE Register (with SpitFire extensions).
+ *
+ * -----------------------------------------------------------------------
+ * | Resv | IG | MG | CLE | TLE |  MM  | RED | PEF | AM | PRIV | IE | AG |
+ * -----------------------------------------------------------------------
+ *  63  12  11   10    9     8    7   6   5     4     3     2     1    0
+ */
+#define PSTATE_IG   _AC(0x0000000000000800,UL) /* Interrupt Globals.    */
+#define PSTATE_MG   _AC(0x0000000000000400,UL) /* MMU Globals.          */
+#define PSTATE_CLE  _AC(0x0000000000000200,UL) /* Current Little Endian.*/
+#define PSTATE_TLE  _AC(0x0000000000000100,UL) /* Trap Little Endian.   */
+#define PSTATE_MM   _AC(0x00000000000000c0,UL) /* Memory Model.         */
+#define PSTATE_TSO  _AC(0x0000000000000000,UL) /* MM: TotalStoreOrder   */
+#define PSTATE_PSO  _AC(0x0000000000000040,UL) /* MM: PartialStoreOrder */
+#define PSTATE_RMO  _AC(0x0000000000000080,UL) /* MM: RelaxedMemoryOrder*/
+#define PSTATE_RED  _AC(0x0000000000000020,UL) /* Reset Error Debug.    */
+#define PSTATE_PEF  _AC(0x0000000000000010,UL) /* Floating Point Enable.*/
+#define PSTATE_AM   _AC(0x0000000000000008,UL) /* Address Mask.         */
+#define PSTATE_PRIV _AC(0x0000000000000004,UL) /* Privilege.            */
+#define PSTATE_IE   _AC(0x0000000000000002,UL) /* Interrupt Enable.     */
+#define PSTATE_AG   _AC(0x0000000000000001,UL) /* Alternate Globals.    */
+
+/* The V9 TSTATE Register (with SpitFire and Linux extensions).
+ *
+ * ---------------------------------------------------------------------
+ * |  Resv |  GL  |  CCR  |  ASI  |  %pil  |  PSTATE  |  Resv  |  CWP  |
+ * ---------------------------------------------------------------------
+ *  63   43 42  40 39   32 31   24 23    20 19       8 7      5 4     0
+ */
+#define TSTATE_GL       _AC(0x0000070000000000,UL) /* Global reg level  */
+#define TSTATE_CCR      _AC(0x000000ff00000000,UL) /* Condition Codes.  */
+#define TSTATE_XCC      _AC(0x000000f000000000,UL) /* Condition Codes.  */
+#define TSTATE_XNEG     _AC(0x0000008000000000,UL) /* %xcc Negative.    */
+#define TSTATE_XZERO    _AC(0x0000004000000000,UL) /* %xcc Zero.        */
+#define TSTATE_XOVFL    _AC(0x0000002000000000,UL) /* %xcc Overflow.    */
+#define TSTATE_XCARRY   _AC(0x0000001000000000,UL) /* %xcc Carry.       */
+#define TSTATE_ICC      _AC(0x0000000f00000000,UL) /* Condition Codes.  */
+#define TSTATE_INEG     _AC(0x0000000800000000,UL) /* %icc Negative.    */
+#define TSTATE_IZERO    _AC(0x0000000400000000,UL) /* %icc Zero.        */
+#define TSTATE_IOVFL    _AC(0x0000000200000000,UL) /* %icc Overflow.    */
+#define TSTATE_ICARRY   _AC(0x0000000100000000,UL) /* %icc Carry.       */
+#define TSTATE_ASI      _AC(0x00000000ff000000,UL) /* AddrSpace ID.     */
+#define TSTATE_PIL      _AC(0x0000000000f00000,UL) /* %pil (Linux traps)*/
+#define TSTATE_PSTATE   _AC(0x00000000000fff00,UL) /* PSTATE.           */
+#define TSTATE_IG       _AC(0x0000000000080000,UL) /* Interrupt Globals.*/
+#define TSTATE_MG       _AC(0x0000000000040000,UL) /* MMU Globals.      */
+#define TSTATE_CLE      _AC(0x0000000000020000,UL) /* CurrLittleEndian. */
+#define TSTATE_TLE      _AC(0x0000000000010000,UL) /* TrapLittleEndian. */
+#define TSTATE_MM       _AC(0x000000000000c000,UL) /* Memory Model.     */
+#define TSTATE_TSO      _AC(0x0000000000000000,UL) /* MM: TSO           */
+#define TSTATE_PSO      _AC(0x0000000000004000,UL) /* MM: PSO           */
+#define TSTATE_RMO      _AC(0x0000000000008000,UL) /* MM: RMO           */
+#define TSTATE_RED      _AC(0x0000000000002000,UL) /* Reset Error Debug.*/
+#define TSTATE_PEF      _AC(0x0000000000001000,UL) /* FPU Enable.       */
+#define TSTATE_AM       _AC(0x0000000000000800,UL) /* Address Mask.     */
+#define TSTATE_PRIV     _AC(0x0000000000000400,UL) /* Privilege.        */
+#define TSTATE_IE       _AC(0x0000000000000200,UL) /* Interrupt Enable. */
+#define TSTATE_AG       _AC(0x0000000000000100,UL) /* Alternate Globals.*/
+#define TSTATE_SYSCALL  _AC(0x0000000000000020,UL) /* in syscall trap   */
+#define TSTATE_CWP      _AC(0x000000000000001f,UL) /* Curr Win-Pointer. */
+
+/* Floating-Point Registers State Register.
+ *
+ * --------------------------------
+ * |  Resv  |  FEF  |  DU  |  DL  |
+ * --------------------------------
+ *  63     3    2       1      0
+ */
+#define FPRS_FEF        _AC(0x0000000000000004,UL) /* FPU Enable.       */
+#define FPRS_DU         _AC(0x0000000000000002,UL) /* Dirty Upper.      */
+#define FPRS_DL         _AC(0x0000000000000001,UL) /* Dirty Lower.      */
+
+/* Version Register.
+ *
+ * ------------------------------------------------------
+ * | MANUF | IMPL | MASK | Resv | MAXTL | Resv | MAXWIN |
+ * ------------------------------------------------------
+ *  63   48 47  32 31  24 23  16 15    8 7    5 4      0
+ */
+#define VERS_MANUF      _AC(0xffff000000000000,UL) /* Manufacturer.     */
+#define VERS_IMPL       _AC(0x0000ffff00000000,UL) /* Implementation.   */
+#define VERS_MASK       _AC(0x00000000ff000000,UL) /* Mask Set Revision.*/
+#define VERS_MAXTL      _AC(0x000000000000ff00,UL) /* Max Trap Level.   */
+#define VERS_MAXWIN     _AC(0x000000000000001f,UL) /* Max RegWindow Idx.*/
+
+#endif /* !(_SPARC64_PSTATE_H) */
diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h
new file mode 100644
index 000000000000..6dcbe2eed2e2
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PTRACE_H
+#define ___ASM_SPARC_PTRACE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ptrace_64.h>
+#else
+#include <asm/ptrace_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h
new file mode 100644
index 000000000000..d43c88b86834
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace_32.h
@@ -0,0 +1,176 @@
+#ifndef _SPARC_PTRACE_H
+#define _SPARC_PTRACE_H
+
+#include <asm/psr.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct pt_regs {
+        unsigned long psr;
+        unsigned long pc;
+        unsigned long npc;
+        unsigned long y;
+        unsigned long u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_WIM       UREG_G0
+#define UREG_FADDR     UREG_G0
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+        return (regs->psr & PSR_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+        return (regs->psr &= ~PSR_SYSCALL);
+}
+
+/* A register window */
+struct reg_window {
+        unsigned long locals[8];
+        unsigned long ins[8];
+};
+
+/* A Sparc stack frame */
+struct sparc_stackf {
+        unsigned long locals[8];
+        unsigned long ins[6];
+        struct sparc_stackf *fp;
+        unsigned long callers_pc;
+        char *structptr;
+        unsigned long xargs[6];
+        unsigned long xxargs[1];
+};
+
+#define TRACEREG_SZ   sizeof(struct pt_regs)
+#define STACKFRAME_SZ sizeof(struct sparc_stackf)
+
+#ifdef __KERNEL__
+
+#define user_mode(regs) (!((regs)->psr & PSR_PS))
+#define instruction_pointer(regs) ((regs)->pc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
+unsigned long profile_pc(struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ       0x50
+#define STACKFRAME_SZ     0x60
+#endif
+
+/*
+ * The asm-offsets.h is a generated file, so we cannot include it.
+ * It may be OK for glibc headers, but it's utterly pointless for C code.
+ * The assembly code using those offsets has to include it explicitly.
+ */
+/* #include <asm/asm-offsets.h> */
+
+/* These are for pt_regs. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH       11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+#endif /* !(_SPARC_PTRACE_H) */
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
new file mode 100644
index 000000000000..ec6d45c84cd0
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -0,0 +1,347 @@
+#ifndef _SPARC64_PTRACE_H
+#define _SPARC64_PTRACE_H
+
+#include <asm/pstate.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+/* This magic value must have the low 9 bits clear,
+ * as that is where we encode the %tt value, see below.
+ */
+#define PT_REGS_MAGIC 0x57ac6c00
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct pt_regs {
+        unsigned long u_regs[16]; /* globals and ins */
+        unsigned long tstate;
+        unsigned long tpc;
+        unsigned long tnpc;
+        unsigned int y;
+
+        /* We encode a magic number, PT_REGS_MAGIC, along
+         * with the %tt (trap type) register value at trap
+         * entry time.  The magic number allows us to identify
+         * accurately a trap stack frame in the stack
+         * unwinder, and the %tt value allows us to test
+         * things like "in a system call" etc. for an arbitray
+         * process.
+         *
+         * The PT_REGS_MAGIC is choosen such that it can be
+         * loaded completely using just a sethi instruction.
+         */
+        unsigned int magic;
+};
+
+static inline int pt_regs_trap_type(struct pt_regs *regs)
+{
+        return regs->magic & 0x1ff;
+}
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+        return (regs->tstate & TSTATE_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+        return (regs->tstate &= ~TSTATE_SYSCALL);
+}
+
+struct pt_regs32 {
+        unsigned int psr;
+        unsigned int pc;
+        unsigned int npc;
+        unsigned int y;
+        unsigned int u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+/* A V9 register window */
+struct reg_window {
+        unsigned long locals[8];
+        unsigned long ins[8];
+};
+
+/* A 32-bit register window. */
+struct reg_window32 {
+        unsigned int locals[8];
+        unsigned int ins[8];
+};
+
+/* A V9 Sparc stack frame */
+struct sparc_stackf {
+        unsigned long locals[8];
+        unsigned long ins[6];
+        struct sparc_stackf *fp;
+        unsigned long callers_pc;
+        char *structptr;
+        unsigned long xargs[6];
+        unsigned long xxargs[1];
+};
+
+/* A 32-bit Sparc stack frame */
+struct sparc_stackf32 {
+        unsigned int locals[8];
+        unsigned int ins[6];
+        unsigned int fp;
+        unsigned int callers_pc;
+        unsigned int structptr;
+        unsigned int xargs[6];
+        unsigned int xxargs[1];
+};
+
+struct sparc_trapf {
+        unsigned long locals[8];
+        unsigned long ins[8];
+        unsigned long _unused;
+        struct pt_regs *regs;
+};
+
+#define TRACEREG_SZ     sizeof(struct pt_regs)
+#define STACKFRAME_SZ   sizeof(struct sparc_stackf)
+
+#define TRACEREG32_SZ   sizeof(struct pt_regs32)
+#define STACKFRAME32_SZ sizeof(struct sparc_stackf32)
+
+#ifdef __KERNEL__
+
+struct global_reg_snapshot {
+        unsigned long           tstate;
+        unsigned long           tpc;
+        unsigned long           tnpc;
+        unsigned long           o7;
+        unsigned long           i7;
+        struct thread_info      *thread;
+        unsigned long           pad1;
+        unsigned long           pad2;
+};
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define force_successful_syscall_return()           \
+do {    current_thread_info()->syscall_noerror = 1; \
+} while (0)
+#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
+#define instruction_pointer(regs) ((regs)->tpc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
+#define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+extern void show_regs(struct pt_regs *);
+extern void __show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ             0xa0
+#define STACKFRAME_SZ           0xc0
+
+#define TRACEREG32_SZ           0x50
+#define STACKFRAME32_SZ         0x60
+#endif
+
+#ifdef __KERNEL__
+#define STACK_BIAS              2047
+#endif
+
+/* These are for pt_regs. */
+#define PT_V9_G0     0x00
+#define PT_V9_G1     0x08
+#define PT_V9_G2     0x10
+#define PT_V9_G3     0x18
+#define PT_V9_G4     0x20
+#define PT_V9_G5     0x28
+#define PT_V9_G6     0x30
+#define PT_V9_G7     0x38
+#define PT_V9_I0     0x40
+#define PT_V9_I1     0x48
+#define PT_V9_I2     0x50
+#define PT_V9_I3     0x58
+#define PT_V9_I4     0x60
+#define PT_V9_I5     0x68
+#define PT_V9_I6     0x70
+#define PT_V9_FP     PT_V9_I6
+#define PT_V9_I7     0x78
+#define PT_V9_TSTATE 0x80
+#define PT_V9_TPC    0x88
+#define PT_V9_TNPC   0x90
+#define PT_V9_Y      0x98
+#define PT_V9_MAGIC  0x9c
+#define PT_TSTATE       PT_V9_TSTATE
+#define PT_TPC          PT_V9_TPC
+#define PT_TNPC         PT_V9_TNPC
+
+/* These for pt_regs32. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_V9_L0     0x00
+#define RW_V9_L1     0x08
+#define RW_V9_L2     0x10
+#define RW_V9_L3     0x18
+#define RW_V9_L4     0x20
+#define RW_V9_L5     0x28
+#define RW_V9_L6     0x30
+#define RW_V9_L7     0x38
+#define RW_V9_I0     0x40
+#define RW_V9_I1     0x48
+#define RW_V9_I2     0x50
+#define RW_V9_I3     0x58
+#define RW_V9_I4     0x60
+#define RW_V9_I5     0x68
+#define RW_V9_I6     0x70
+#define RW_V9_I7     0x78
+
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_V9_L0     0x00
+#define SF_V9_L1     0x08
+#define SF_V9_L2     0x10
+#define SF_V9_L3     0x18
+#define SF_V9_L4     0x20
+#define SF_V9_L5     0x28
+#define SF_V9_L6     0x30
+#define SF_V9_L7     0x38
+#define SF_V9_I0     0x40
+#define SF_V9_I1     0x48
+#define SF_V9_I2     0x50
+#define SF_V9_I3     0x58
+#define SF_V9_I4     0x60
+#define SF_V9_I5     0x68
+#define SF_V9_FP     0x70
+#define SF_V9_PC     0x78
+#define SF_V9_RETP   0x80
+#define SF_V9_XARG0  0x88
+#define SF_V9_XARG1  0x90
+#define SF_V9_XARG2  0x98
+#define SF_V9_XARG3  0xa0
+#define SF_V9_XARG4  0xa8
+#define SF_V9_XARG5  0xb0
+#define SF_V9_XXARG  0xb8
+
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+#ifdef __KERNEL__
+
+/* global_reg_snapshot offsets */
+#define GR_SNAP_TSTATE  0x00
+#define GR_SNAP_TPC     0x08
+#define GR_SNAP_TNPC    0x10
+#define GR_SNAP_O7      0x18
+#define GR_SNAP_I7      0x20
+#define GR_SNAP_THREAD  0x28
+#define GR_SNAP_PAD1    0x30
+#define GR_SNAP_PAD2    0x38
+
+#endif  /*  __KERNEL__  */
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH       11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+/* There are for debugging 64-bit processes, either from a 32 or 64 bit
+ * parent.  Thus their complements are for debugging 32-bit processes only.
+ */
+
+#define PTRACE_GETREGS64          22
+#define PTRACE_SETREGS64          23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETFPREGS64        25
+#define PTRACE_SETFPREGS64        26
+
+#endif /* !(_SPARC64_PTRACE_H) */
diff --git a/arch/sparc/include/asm/reboot.h b/arch/sparc/include/asm/reboot.h
new file mode 100644
index 000000000000..3f3f43f5be5e
--- /dev/null
+++ b/arch/sparc/include/asm/reboot.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_REBOOT_H
+#define _SPARC64_REBOOT_H
+
+extern void machine_alt_power_off(void);
+
+#endif /* _SPARC64_REBOOT_H */
diff --git a/arch/sparc/include/asm/reg.h b/arch/sparc/include/asm/reg.h
new file mode 100644
index 000000000000..0c16e19cae4d
--- /dev/null
+++ b/arch/sparc/include/asm/reg.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_REG_H
+#define ___ASM_SPARC_REG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/reg_64.h>
+#else
+#include <asm/reg_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/reg_32.h b/arch/sparc/include/asm/reg_32.h
new file mode 100644
index 000000000000..1efb056fb3d1
--- /dev/null
+++ b/arch/sparc/include/asm/reg_32.h
@@ -0,0 +1,79 @@
+/*
+ * linux/include/asm/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC_REG_H
+#define __SPARC_REG_H
+
+struct regs {
+        int     r_psr;
+#define r_ps r_psr
+        int     r_pc;
+        int     r_npc;
+        int     r_y;
+        int     r_g1;
+        int     r_g2;
+        int     r_g3;
+        int     r_g4;
+        int     r_g5;
+        int     r_g6;
+        int     r_g7;
+        int     r_o0;
+        int     r_o1;
+        int     r_o2;
+        int     r_o3;
+        int     r_o4;
+        int     r_o5;
+        int     r_o6;
+        int     r_o7;
+};
+
+struct fpq {
+        unsigned long *addr;
+        unsigned long instr;
+};
+
+struct  fq {
+        union {
+                double  whole;
+                struct  fpq fpq;
+        } FQu;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned
+
+struct fp_status {
+        union {
+                FPU_REGS_TYPE Fpu_regs[32];
+                double  Fpu_dregs[16];
+        } fpu_fr;
+        FPU_FSR_TYPE Fpu_fsr;
+        unsigned Fpu_flags;
+        unsigned Fpu_extra;
+        unsigned Fpu_qcnt;
+        struct fq Fpu_q[16];
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr.Fpu_regs
+#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+#define fpu_flags f_fpstatus.Fpu_flags
+#define fpu_extra f_fpstatus.Fpu_extra
+#define fpu_q     f_fpstatus.Fpu_q
+#define fpu_qcnt  f_fpstatus.Fpu_qcnt
+
+struct fpu {
+        struct fp_status f_fpstatus;
+};
+
+#endif /* __SPARC_REG_H */
diff --git a/arch/sparc/include/asm/reg_64.h b/arch/sparc/include/asm/reg_64.h
new file mode 100644
index 000000000000..6f277d7c7d88
--- /dev/null
+++ b/arch/sparc/include/asm/reg_64.h
@@ -0,0 +1,56 @@
+/*
+ * linux/asm/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC64_REG_H
+#define __SPARC64_REG_H
+
+struct regs {
+        unsigned long r_g1;
+        unsigned long r_g2;
+        unsigned long r_g3;
+        unsigned long r_g4;
+        unsigned long r_g5;
+        unsigned long r_g6;
+        unsigned long r_g7;
+        unsigned long r_o0;
+        unsigned long r_o1;
+        unsigned long r_o2;
+        unsigned long r_o3;
+        unsigned long r_o4;
+        unsigned long r_o5;
+        unsigned long r_o6;
+        unsigned long r_o7;
+        unsigned long __pad;
+        unsigned long r_tstate;
+        unsigned long r_tpc;
+        unsigned long r_tnpc;
+        unsigned int  r_y;
+        unsigned int  r_fprs;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned long
+
+struct fp_status {
+        unsigned long fpu_fr[32];
+        unsigned long Fpu_fsr;
+};
+
+struct fpu {
+        struct fp_status f_fpstatus;
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+
+#endif /* __SPARC64_REG_H */
diff --git a/arch/sparc/include/asm/resource.h b/arch/sparc/include/asm/resource.h
new file mode 100644
index 000000000000..fe163cafb4c7
--- /dev/null
+++ b/arch/sparc/include/asm/resource.h
@@ -0,0 +1,30 @@
+/*
+ * resource.h: Resource definitions.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_RESOURCE_H
+#define _SPARC_RESOURCE_H
+
+/*
+ * These two resource limit IDs have a Sparc/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE           6       /* max number of open files */
+#define RLIMIT_NPROC            7       /* max number of processes */
+
+#if defined(__sparc__) && defined(__arch64__)
+/* Use generic version */
+#else
+/*
+ * SuS says limits have to be unsigned.
+ * We make this unsigned, but keep the
+ * old value for compatibility:
+ */
+#define RLIM_INFINITY           0x7fffffff
+#endif
+
+#include <asm-generic/resource.h>
+
+#endif /* !(_SPARC_RESOURCE_H) */
diff --git a/arch/sparc/include/asm/ross.h b/arch/sparc/include/asm/ross.h
new file mode 100644
index 000000000000..ecb6e81786a6
--- /dev/null
+++ b/arch/sparc/include/asm/ross.h
@@ -0,0 +1,191 @@
+/*
+ * ross.h: Ross module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ROSS_H
+#define _SPARC_ROSS_H
+
+#include <asm/asi.h>
+#include <asm/page.h>
+
+/* Ross made Hypersparcs have a %psr 'impl' field of '0001'.  The 'vers'
+ * field has '1111'.
+ */
+
+/* The MMU control register fields on the HyperSparc.
+ *
+ * -----------------------------------------------------------------
+ * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME|
+ * -----------------------------------------------------------------
+ *  31    24 23-22 21  20  19 18-15 14 13 12 11 10  9   8 7-2  1  0
+ *
+ * Phew, lots of fields there ;-)
+ *
+ * CWR: Cache Wrapping Enabled, if one cache wrapping is on.
+ * SE: Snoop Enable, turns on bus snooping for cache activity if one.
+ * WBE: Write Buffer Enable, one turns it on.
+ * MID: The ModuleID of the chip for MBus transactions.
+ * BM: Boot-Mode. One indicates the MMU is in boot mode.
+ * C: Indicates whether accesses are cachable while the MMU is
+ *    disabled.
+ * CS: Cache Size -- 0 = 128k, 1 = 256k
+ * MR: Memory Reflection, one indicates that the memory bus connected
+ *     to the MBus supports memory reflection.
+ * CM: Cache Mode -- 0 = write-through, 1 = copy-back
+ * CE: Cache Enable -- 0 = no caching, 1 = cache is on
+ * NF: No Fault -- 0 = faults trap the CPU from supervisor mode
+ *                 1 = faults from supervisor mode do not generate traps
+ * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on
+ */
+
+#define HYPERSPARC_CWENABLE   0x00200000
+#define HYPERSPARC_SBENABLE   0x00100000
+#define HYPERSPARC_WBENABLE   0x00080000
+#define HYPERSPARC_MIDMASK    0x00078000
+#define HYPERSPARC_BMODE      0x00004000
+#define HYPERSPARC_ACENABLE   0x00002000
+#define HYPERSPARC_CSIZE      0x00001000
+#define HYPERSPARC_MRFLCT     0x00000800
+#define HYPERSPARC_CMODE      0x00000400
+#define HYPERSPARC_CENABLE    0x00000100
+#define HYPERSPARC_NFAULT     0x00000002
+#define HYPERSPARC_MENABLE    0x00000001
+
+
+/* The ICCR instruction cache register on the HyperSparc.
+ *
+ * -----------------------------------------------
+ * |                                 | FTD | ICE |
+ * -----------------------------------------------
+ *  31                                  1     0
+ *
+ * This register is accessed using the V8 'wrasr' and 'rdasr'
+ * opcodes, since not all assemblers understand them and those
+ * that do use different semantics I will just hard code the
+ * instruction with a '.word' statement.
+ *
+ * FTD:  If set to one flush instructions executed during an
+ *       instruction cache hit occurs, the corresponding line
+ *       for said cache-hit is invalidated.  If FTD is zero,
+ *       an unimplemented 'flush' trap will occur when any
+ *       flush is executed by the processor.
+ *
+ * ICE:  If set to one, the instruction cache is enabled.  If
+ *       zero, the cache will not be used for instruction fetches.
+ *
+ * All other bits are read as zeros, and writes to them have no
+ * effect.
+ *
+ * Wheee, not many assemblers understand the %iccr register nor
+ * the generic asr r/w instructions.
+ *
+ *  1000 0011 0100 0111 1100 0000 0000 0000   ! rd %iccr, %g1
+ *
+ * 0x  8    3    4    7    c    0    0    0   ! 0x8347c000
+ *
+ *  1011 1111 1000 0000 0110 0000 0000 0000   ! wr %g1, 0x0, %iccr
+ *
+ * 0x  b    f    8    0    6    0    0    0   ! 0xbf806000
+ *
+ */
+
+#define HYPERSPARC_ICCR_FTD     0x00000002
+#define HYPERSPARC_ICCR_ICE     0x00000001
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int get_ross_icr(void)
+{
+        unsigned int icreg;
+
+        __asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */
+                             "mov %%g1, %0\n\t"
+                             : "=r" (icreg)
+                             : /* no inputs */
+                             : "g1", "memory");
+
+        return icreg;
+}
+
+static inline void put_ross_icr(unsigned int icreg)
+{
+        __asm__ __volatile__("or %%g0, %0, %%g1\n\t"
+                             ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */
+                             "nop\n\t"
+                             "nop\n\t"
+                             "nop\n\t"
+                             : /* no outputs */
+                             : "r" (icreg)
+                             : "g1", "memory");
+
+        return;
+}
+
+/* HyperSparc specific cache flushing. */
+
+/* This is for the on-chip instruction cache. */
+static inline void hyper_flush_whole_icache(void)
+{
+        __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+                             : /* no outputs */
+                             : "i" (ASI_M_FLUSH_IWHOLE)
+                             : "memory");
+        return;
+}
+
+extern int vac_cache_size;
+extern int vac_line_size;
+
+static inline void hyper_clear_all_tags(void)
+{
+        unsigned long addr;
+
+        for(addr = 0; addr < vac_cache_size; addr += vac_line_size)
+                __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                                     : /* no outputs */
+                                     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+                                     : "memory");
+}
+
+static inline void hyper_flush_unconditional_combined(void)
+{
+        unsigned long addr;
+
+        for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+                __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                                     : /* no outputs */
+                                     : "r" (addr), "i" (ASI_M_FLUSH_CTX)
+                                     : "memory");
+}
+
+static inline void hyper_flush_cache_user(void)
+{
+        unsigned long addr;
+
+        for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+                __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                                     : /* no outputs */
+                                     : "r" (addr), "i" (ASI_M_FLUSH_USER)
+                                     : "memory");
+}
+
+static inline void hyper_flush_cache_page(unsigned long page)
+{
+        unsigned long end;
+
+        page &= PAGE_MASK;
+        end = page + PAGE_SIZE;
+        while (page < end) {
+                __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                                     : /* no outputs */
+                                     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+                                     : "memory");
+                page += vac_line_size;
+        }
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_ROSS_H) */
diff --git a/arch/sparc/include/asm/rtc.h b/arch/sparc/include/asm/rtc.h
new file mode 100644
index 000000000000..f9ecb1fe2ecd
--- /dev/null
+++ b/arch/sparc/include/asm/rtc.h
@@ -0,0 +1,26 @@
+/*
+ * rtc.h: Definitions for access to the Mostek real time clock
+ *
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _RTC_H
+#define _RTC_H
+
+#include <linux/ioctl.h>
+
+struct rtc_time
+{
+        int     sec;    /* Seconds (0-59) */
+        int     min;    /* Minutes (0-59) */
+        int     hour;   /* Hour (0-23) */
+        int     dow;    /* Day of the week (1-7) */
+        int     dom;    /* Day of the month (1-31) */
+        int     month;  /* Month of year (1-12) */
+        int     year;   /* Year (0-99) */
+};
+
+#define RTCGET _IOR('p', 20, struct rtc_time)
+#define RTCSET _IOW('p', 21, struct rtc_time)
+
+#endif
diff --git a/arch/sparc/include/asm/rwsem-const.h b/arch/sparc/include/asm/rwsem-const.h
new file mode 100644
index 000000000000..a303c9d64d84
--- /dev/null
+++ b/arch/sparc/include/asm/rwsem-const.h
@@ -0,0 +1,12 @@
+/* rwsem-const.h: RW semaphore counter constants.  */
+#ifndef _SPARC64_RWSEM_CONST_H
+#define _SPARC64_RWSEM_CONST_H
+
+#define RWSEM_UNLOCKED_VALUE            0x00000000
+#define RWSEM_ACTIVE_BIAS               0x00000001
+#define RWSEM_ACTIVE_MASK               0x0000ffff
+#define RWSEM_WAITING_BIAS              0xffff0000
+#define RWSEM_ACTIVE_READ_BIAS          RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS         (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+#endif /* _SPARC64_RWSEM_CONST_H */
diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h
new file mode 100644
index 000000000000..1dc129ac2feb
--- /dev/null
+++ b/arch/sparc/include/asm/rwsem.h
@@ -0,0 +1,84 @@
+/*
+ * rwsem.h: R/W semaphores implemented using CAS
+ *
+ * Written by David S. Miller (davem@redhat.com), 2001.
+ * Derived from asm-i386/rwsem.h
+ */
+#ifndef _SPARC64_RWSEM_H
+#define _SPARC64_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/rwsem-const.h>
+
+struct rwsem_waiter;
+
+struct rw_semaphore {
+        signed int count;
+        spinlock_t              wait_lock;
+        struct list_head        wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+        struct lockdep_map      dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
+  __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name) \
+        struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+                         struct lock_class_key *key);
+
+#define init_rwsem(sem)                                         \
+do {                                                            \
+        static struct lock_class_key __key;                     \
+                                                                \
+        __init_rwsem((sem), #sem, &__key);                      \
+} while (0)
+
+extern void __down_read(struct rw_semaphore *sem);
+extern int __down_read_trylock(struct rw_semaphore *sem);
+extern void __down_write(struct rw_semaphore *sem);
+extern int __down_write_trylock(struct rw_semaphore *sem);
+extern void __up_read(struct rw_semaphore *sem);
+extern void __up_write(struct rw_semaphore *sem);
+extern void __downgrade_write(struct rw_semaphore *sem);
+
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+        __down_write(sem);
+}
+
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+        return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+        atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+        return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC64_RWSEM_H */
diff --git a/arch/sparc/include/asm/sbi.h b/arch/sparc/include/asm/sbi.h
new file mode 100644
index 000000000000..5eb7f1965d33
--- /dev/null
+++ b/arch/sparc/include/asm/sbi.h
@@ -0,0 +1,115 @@
+/*
+ * sbi.h:  SBI (Sbus Interface on sun4d) definitions
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_SBI_H
+#define _SPARC_SBI_H
+
+#include <asm/obio.h>
+
+/* SBI */
+struct sbi_regs {
+/* 0x0000 */    u32             cid;            /* Component ID */
+/* 0x0004 */    u32             ctl;            /* Control */
+/* 0x0008 */    u32             status;         /* Status */
+                u32             _unused1;
+                
+/* 0x0010 */    u32             cfg0;           /* Slot0 config reg */
+/* 0x0014 */    u32             cfg1;           /* Slot1 config reg */
+/* 0x0018 */    u32             cfg2;           /* Slot2 config reg */
+/* 0x001c */    u32             cfg3;           /* Slot3 config reg */
+
+/* 0x0020 */    u32             stb0;           /* Streaming buf control for slot 0 */
+/* 0x0024 */    u32             stb1;           /* Streaming buf control for slot 1 */
+/* 0x0028 */    u32             stb2;           /* Streaming buf control for slot 2 */
+/* 0x002c */    u32             stb3;           /* Streaming buf control for slot 3 */
+
+/* 0x0030 */    u32             intr_state;     /* Interrupt state */
+/* 0x0034 */    u32             intr_tid;       /* Interrupt target ID */
+/* 0x0038 */    u32             intr_diag;      /* Interrupt diagnostics */
+};
+
+#define SBI_CID                 0x02800000
+#define SBI_CTL                 0x02800004
+#define SBI_STATUS              0x02800008
+#define SBI_CFG0                0x02800010
+#define SBI_CFG1                0x02800014
+#define SBI_CFG2                0x02800018
+#define SBI_CFG3                0x0280001c
+#define SBI_STB0                0x02800020
+#define SBI_STB1                0x02800024
+#define SBI_STB2                0x02800028
+#define SBI_STB3                0x0280002c
+#define SBI_INTR_STATE          0x02800030
+#define SBI_INTR_TID            0x02800034
+#define SBI_INTR_DIAG           0x02800038
+
+/* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */
+#define SBI_CFG_BURST_MASK      0x0000001e
+
+/* How to make devid from sbi no */
+#define SBI2DEVID(sbino) ((sbino<<4)|2)
+
+/* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level
+ *
+ *                 +-------+-------+-------+-------+-------+-------+-------+-------+
+ *  SBUS IRQ LEVEL |   7   |   6   |   5   |   4   |   3   |   2   |   1   |       |
+ *                 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser |
+ *  SLOT #         |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|  ved  |
+ *                 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+
+ *  Bits           31      27      23      19      15      11      7       3      0
+ */
+
+
+#ifndef __ASSEMBLY__
+
+static inline int acquire_sbi(int devid, int mask)
+{
+        __asm__ __volatile__ ("swapa [%2] %3, %0" :
+                              "=r" (mask) :
+                              "0" (mask),
+                              "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+                              "i" (ASI_M_CTL));
+        return mask;
+}
+
+static inline void release_sbi(int devid, int mask)
+{
+        __asm__ __volatile__ ("sta %0, [%1] %2" : :
+                              "r" (mask),
+                              "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+                              "i" (ASI_M_CTL));
+}
+
+static inline void set_sbi_tid(int devid, int targetid)
+{
+        __asm__ __volatile__ ("sta %0, [%1] %2" : :
+                              "r" (targetid),
+                              "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID),
+                              "i" (ASI_M_CTL));
+}
+
+static inline int get_sbi_ctl(int devid, int cfgno)
+{
+        int cfg;
+        
+        __asm__ __volatile__ ("lda [%1] %2, %0" :
+                              "=r" (cfg) :
+                              "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+                              "i" (ASI_M_CTL));
+        return cfg;
+}
+
+static inline void set_sbi_ctl(int devid, int cfgno, int cfg)
+{
+        __asm__ __volatile__ ("sta %0, [%1] %2" : :
+                              "r" (cfg),
+                              "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+                              "i" (ASI_M_CTL));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_SBI_H) */
diff --git a/arch/sparc/include/asm/sbus.h b/arch/sparc/include/asm/sbus.h
new file mode 100644
index 000000000000..f82481ab44db
--- /dev/null
+++ b/arch/sparc/include/asm/sbus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SBUS_H
+#define ___ASM_SPARC_SBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sbus_64.h>
+#else
+#include <asm/sbus_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sbus_32.h b/arch/sparc/include/asm/sbus_32.h
new file mode 100644
index 000000000000..77b5d3aadc99
--- /dev/null
+++ b/arch/sparc/include/asm/sbus_32.h
@@ -0,0 +1,153 @@
+/*
+ * sbus.h:  Defines for the Sun SBus.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SBUS_H
+#define _SPARC_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0xf8000000
+#define SBUS_OFF_MASK          0x01ffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
+}
+
+static inline int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+        struct of_device        ofdev;
+        struct sbus_bus         *bus;
+        struct sbus_dev         *next;
+        struct sbus_dev         *child;
+        struct sbus_dev         *parent;
+        int prom_node;
+        char prom_name[64];
+        int slot;
+
+        struct resource resource[PROMREG_MAX];
+
+        struct linux_prom_registers reg_addrs[PROMREG_MAX];
+        int num_registers;
+
+        struct linux_prom_ranges device_ranges[PROMREG_MAX];
+        int num_device_ranges;
+
+        unsigned int irqs[4];
+        int num_irqs;
+};
+#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+        struct of_device        ofdev;
+        struct sbus_dev         *devices;       /* Link to devices on this SBus */
+        struct sbus_bus         *next;          /* next SBus, if more than one SBus */
+        int                     prom_node;      /* PROM device tree node for this SBus */
+        char                    prom_name[64];  /* Usually "sbus" or "sbi" */
+        int                     clock_freq;
+
+        struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+        int num_sbus_ranges;
+
+        int devid;
+        int board;
+};
+#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
+
+extern struct sbus_bus *sbus_root;
+
+static inline int
+sbus_is_slave(struct sbus_dev *dev)
+{
+        /* XXX Have to write this for sun4c's */
+        return 0;
+}
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+
+#define for_all_sbusdev(device, bus) \
+        for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+                for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)        (0) /* actually, sparc_cpu_model==sun4d */
+#define sbus_can_burst64(sdev)          (0) /* actually, sparc_cpu_model==sun4d */
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+extern void sbus_fill_device_irq(struct sbus_dev *);
+
+/* These yield IOMMU mappings in consistent mode. */
+extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
+extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
+void prom_adjust_ranges(struct linux_prom_ranges *, int,
+                        struct linux_prom_ranges *, int);
+
+#define SBUS_DMA_BIDIRECTIONAL  DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE       DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE     DMA_FROM_DEVICE
+#define SBUS_DMA_NONE           DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
+extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
+extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
+extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
+extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Eric Brower (ebrower@usa.net)
+ * Translate SBus interrupt levels to ino values--
+ * this is used when converting sbus "interrupts" OBP
+ * node values to "intr" node values, and is platform
+ * dependent.  If only we could call OBP with
+ * "sbus-intr>cpu (sbint -- ino)" from kernel...
+ * See .../drivers/sbus/sbus.c for details.
+ */
+BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
+#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
+
+extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
+extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
+extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
+extern int sbus_arch_preinit(void);
+extern void sbus_arch_postinit(void);
+
+#endif /* !(_SPARC_SBUS_H) */
diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h
new file mode 100644
index 000000000000..0e16b6dd7e96
--- /dev/null
+++ b/arch/sparc/include/asm/sbus_64.h
@@ -0,0 +1,190 @@
+/* sbus.h: Defines for the Sun SBus.
+ *
+ * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SBUS_H
+#define _SPARC64_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/iommu.h>
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0x00000000
+#define SBUS_OFF_MASK          0x0fffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset));
+}
+
+static inline int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+        struct of_device        ofdev;
+        struct sbus_bus         *bus;
+        struct sbus_dev         *next;
+        struct sbus_dev         *child;
+        struct sbus_dev         *parent;
+        int prom_node;
+        char prom_name[64];
+        int slot;
+
+        struct resource resource[PROMREG_MAX];
+
+        struct linux_prom_registers reg_addrs[PROMREG_MAX];
+        int num_registers;
+
+        struct linux_prom_ranges device_ranges[PROMREG_MAX];
+        int num_device_ranges;
+
+        unsigned int irqs[4];
+        int num_irqs;
+};
+#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+        struct of_device        ofdev;
+        struct sbus_dev         *devices;       /* Tree of SBUS devices */
+        struct sbus_bus         *next;          /* Next SBUS in system  */
+        int                     prom_node;      /* OBP node of SBUS     */
+        char                    prom_name[64];  /* Usually "sbus" or "sbi" */
+        int                     clock_freq;
+
+        struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+        int num_sbus_ranges;
+
+        int portid;
+};
+#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
+
+extern struct sbus_bus *sbus_root;
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+
+#define for_all_sbusdev(device, bus) \
+        for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+                for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)        (1)
+#define sbus_can_burst64(sdev)          (1)
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+extern void sbus_fill_device_irq(struct sbus_dev *);
+
+static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size,
+                                          dma_addr_t *dma_handle)
+{
+        return dma_alloc_coherent(&sdev->ofdev.dev, size,
+                                  dma_handle, GFP_ATOMIC);
+}
+
+static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size,
+                                        void *vaddr, dma_addr_t dma_handle)
+{
+        return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle);
+}
+
+#define SBUS_DMA_BIDIRECTIONAL  DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE       DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE     DMA_FROM_DEVICE
+#define SBUS_DMA_NONE           DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr,
+                                         size_t size, int direction)
+{
+        return dma_map_single(&sdev->ofdev.dev, ptr, size,
+                              (enum dma_data_direction) direction);
+}
+
+static inline void sbus_unmap_single(struct sbus_dev *sdev,
+                                     dma_addr_t dma_addr, size_t size,
+                                     int direction)
+{
+        dma_unmap_single(&sdev->ofdev.dev, dma_addr, size,
+                         (enum dma_data_direction) direction);
+}
+
+static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg,
+                              int nents, int direction)
+{
+        return dma_map_sg(&sdev->ofdev.dev, sg, nents,
+                          (enum dma_data_direction) direction);
+}
+
+static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg,
+                                 int nents, int direction)
+{
+        dma_unmap_sg(&sdev->ofdev.dev, sg, nents,
+                     (enum dma_data_direction) direction);
+}
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev,
+                                                dma_addr_t dma_handle,
+                                                size_t size, int direction)
+{
+        dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size,
+                                (enum dma_data_direction) direction);
+}
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+
+static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev,
+                                                   dma_addr_t dma_handle,
+                                                   size_t size, int direction)
+{
+        /* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev,
+                                            struct scatterlist *sg,
+                                            int nents, int direction)
+{
+        dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents,
+                            (enum dma_data_direction) direction);
+}
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+
+static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev,
+                                               struct scatterlist *sg,
+                                               int nents, int direction)
+{
+        /* No flushing needed to sync cpu writes to the device.  */
+}
+
+extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
+extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
+extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
+extern int sbus_arch_preinit(void);
+extern void sbus_arch_postinit(void);
+
+#endif /* !(_SPARC64_SBUS_H) */
diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h
new file mode 100644
index 000000000000..ec21a4517641
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SCATTERLIST_H
+#define ___ASM_SPARC_SCATTERLIST_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/scatterlist_64.h>
+#else
+#include <asm/scatterlist_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/scatterlist_32.h b/arch/sparc/include/asm/scatterlist_32.h
new file mode 100644
index 000000000000..c82609ca1d0f
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist_32.h
@@ -0,0 +1,26 @@
+#ifndef _SPARC_SCATTERLIST_H
+#define _SPARC_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+        unsigned long sg_magic;
+#endif
+        unsigned long page_link;
+        unsigned int offset;
+
+        unsigned int length;
+
+        __u32 dvma_address; /* A place to hang host-specific addresses at. */
+        __u32 dvma_length;
+};
+
+#define sg_dma_address(sg) ((sg)->dvma_address)
+#define sg_dma_len(sg)     ((sg)->dvma_length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/arch/sparc/include/asm/scatterlist_64.h b/arch/sparc/include/asm/scatterlist_64.h
new file mode 100644
index 000000000000..81bd058f9382
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist_64.h
@@ -0,0 +1,27 @@
+#ifndef _SPARC64_SCATTERLIST_H
+#define _SPARC64_SCATTERLIST_H
+
+#include <asm/page.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+        unsigned long   sg_magic;
+#endif
+        unsigned long   page_link;
+        unsigned int    offset;
+
+        unsigned int    length;
+
+        dma_addr_t      dma_address;
+        __u32           dma_length;
+};
+
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->dma_length)
+
+#define ISA_DMA_THRESHOLD       (~0UL)
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* !(_SPARC64_SCATTERLIST_H) */
diff --git a/arch/sparc/include/asm/scratchpad.h b/arch/sparc/include/asm/scratchpad.h
new file mode 100644
index 000000000000..5e8b01fb3343
--- /dev/null
+++ b/arch/sparc/include/asm/scratchpad.h
@@ -0,0 +1,14 @@
+#ifndef _SPARC64_SCRATCHPAD_H
+#define _SPARC64_SCRATCHPAD_H
+
+/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD.  */
+
+#define SCRATCHPAD_MMU_MISS     0x00 /* Shared with OBP - set by OBP        */
+#define SCRATCHPAD_CPUID        0x08 /* Shared with OBP - set by hypervisor */
+#define SCRATCHPAD_UTSBREG1     0x10
+#define SCRATCHPAD_UTSBREG2     0x18
+        /* 0x20 and 0x28, hypervisor only... */
+#define SCRATCHPAD_UNUSED1      0x30
+#define SCRATCHPAD_UNUSED2      0x38 /* Reserved for OBP                    */
+
+#endif /* !(_SPARC64_SCRATCHPAD_H) */
diff --git a/arch/sparc/include/asm/seccomp.h b/arch/sparc/include/asm/seccomp.h
new file mode 100644
index 000000000000..7fcd9968192b
--- /dev/null
+++ b/arch/sparc/include/asm/seccomp.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h> /* already defines TIF_32BIT */
+
+#ifndef TIF_32BIT
+#error "unexpected TIF_32BIT on sparc64"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif /* _ASM_SECCOMP_H */
diff --git a/arch/sparc/include/asm/sections.h b/arch/sparc/include/asm/sections.h
new file mode 100644
index 000000000000..c7c69b00967f
--- /dev/null
+++ b/arch/sparc/include/asm/sections.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SECTIONS_H
+#define ___ASM_SPARC_SECTIONS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sections_64.h>
+#else
+#include <asm/sections_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sections_32.h b/arch/sparc/include/asm/sections_32.h
new file mode 100644
index 000000000000..6832841df051
--- /dev/null
+++ b/arch/sparc/include/asm/sections_32.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_SECTIONS_H
+#define _SPARC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/arch/sparc/include/asm/sections_64.h b/arch/sparc/include/asm/sections_64.h
new file mode 100644
index 000000000000..3f4b9fdc28d0
--- /dev/null
+++ b/arch/sparc/include/asm/sections_64.h
@@ -0,0 +1,9 @@
+#ifndef _SPARC64_SECTIONS_H
+#define _SPARC64_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+extern char _start[];
+
+#endif
diff --git a/arch/sparc/include/asm/sembuf.h b/arch/sparc/include/asm/sembuf.h
new file mode 100644
index 000000000000..faee1be08d67
--- /dev/null
+++ b/arch/sparc/include/asm/sembuf.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_SEMBUF_H
+#define _SPARC_SEMBUF_H
+
+/*
+ * The semid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+struct semid64_ds {
+        struct ipc64_perm sem_perm;             /* permissions .. see ipc.h */
+        PADDING(__pad1)
+        __kernel_time_t sem_otime;              /* last semop time */
+        PADDING(__pad2)
+        __kernel_time_t sem_ctime;              /* last change time */
+        unsigned long   sem_nsems;              /* no. of semaphores in array */
+        unsigned long   __unused1;
+        unsigned long   __unused2;
+};
+#undef PADDING
+
+#endif /* _SPARC64_SEMBUF_H */
diff --git a/arch/sparc/include/asm/setup.h b/arch/sparc/include/asm/setup.h
new file mode 100644
index 000000000000..2643c62f4ac0
--- /dev/null
+++ b/arch/sparc/include/asm/setup.h
@@ -0,0 +1,14 @@
+/*
+ *      Just a place holder. 
+ */
+
+#ifndef _SPARC_SETUP_H
+#define _SPARC_SETUP_H
+
+#if defined(__sparc__) && defined(__arch64__)
+# define COMMAND_LINE_SIZE 2048
+#else
+# define COMMAND_LINE_SIZE 256
+#endif
+
+#endif /* _SPARC_SETUP_H */
diff --git a/arch/sparc/include/asm/sfafsr.h b/arch/sparc/include/asm/sfafsr.h
new file mode 100644
index 000000000000..e96137b04a4f
--- /dev/null
+++ b/arch/sparc/include/asm/sfafsr.h
@@ -0,0 +1,82 @@
+#ifndef _SPARC64_SFAFSR_H
+#define _SPARC64_SFAFSR_H
+
+#include <linux/const.h>
+
+/* Spitfire Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
+
+#define SFAFSR_ME               (_AC(1,UL) << SFAFSR_ME_SHIFT)
+#define SFAFSR_ME_SHIFT         32
+#define SFAFSR_PRIV             (_AC(1,UL) << SFAFSR_PRIV_SHIFT)
+#define SFAFSR_PRIV_SHIFT       31
+#define SFAFSR_ISAP             (_AC(1,UL) << SFAFSR_ISAP_SHIFT)
+#define SFAFSR_ISAP_SHIFT       30
+#define SFAFSR_ETP              (_AC(1,UL) << SFAFSR_ETP_SHIFT)
+#define SFAFSR_ETP_SHIFT        29
+#define SFAFSR_IVUE             (_AC(1,UL) << SFAFSR_IVUE_SHIFT)
+#define SFAFSR_IVUE_SHIFT       28
+#define SFAFSR_TO               (_AC(1,UL) << SFAFSR_TO_SHIFT)
+#define SFAFSR_TO_SHIFT         27
+#define SFAFSR_BERR             (_AC(1,UL) << SFAFSR_BERR_SHIFT)
+#define SFAFSR_BERR_SHIFT       26
+#define SFAFSR_LDP              (_AC(1,UL) << SFAFSR_LDP_SHIFT)
+#define SFAFSR_LDP_SHIFT        25
+#define SFAFSR_CP               (_AC(1,UL) << SFAFSR_CP_SHIFT)
+#define SFAFSR_CP_SHIFT         24
+#define SFAFSR_WP               (_AC(1,UL) << SFAFSR_WP_SHIFT)
+#define SFAFSR_WP_SHIFT         23
+#define SFAFSR_EDP              (_AC(1,UL) << SFAFSR_EDP_SHIFT)
+#define SFAFSR_EDP_SHIFT        22
+#define SFAFSR_UE               (_AC(1,UL) << SFAFSR_UE_SHIFT)
+#define SFAFSR_UE_SHIFT         21
+#define SFAFSR_CE               (_AC(1,UL) << SFAFSR_CE_SHIFT)
+#define SFAFSR_CE_SHIFT         20
+#define SFAFSR_ETS              (_AC(0xf,UL) << SFAFSR_ETS_SHIFT)
+#define SFAFSR_ETS_SHIFT        16
+#define SFAFSR_PSYND            (_AC(0xffff,UL) << SFAFSR_PSYND_SHIFT)
+#define SFAFSR_PSYND_SHIFT      0
+
+/* UDB Error Register, ASI=0x7f VA<63:0>=0x0(High),0x18(Low) for read
+ *                     ASI=0x77 VA<63:0>=0x0(High),0x18(Low) for write
+ */
+
+#define UDBE_UE                 (_AC(1,UL) << 9)
+#define UDBE_CE                 (_AC(1,UL) << 8)
+#define UDBE_E_SYNDR            (_AC(0xff,UL) << 0)
+
+/* The trap handlers for asynchronous errors encode the AFSR and
+ * other pieces of information into a 64-bit argument for C code
+ * encoded as follows:
+ *
+ * -----------------------------------------------
+ * |  UDB_H  |  UDB_L  | TL>1  |  TT  |   AFSR   |
+ * -----------------------------------------------
+ *  63     54 53     44    42   41  33 32       0
+ *
+ * The AFAR is passed in unchanged.
+ */
+#define SFSTAT_UDBH_MASK        (_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
+#define SFSTAT_UDBH_SHIFT       54
+#define SFSTAT_UDBL_MASK        (_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
+#define SFSTAT_UDBL_SHIFT       44
+#define SFSTAT_TL_GT_ONE        (_AC(1,UL) << SFSTAT_TL_GT_ONE_SHIFT)
+#define SFSTAT_TL_GT_ONE_SHIFT  42
+#define SFSTAT_TRAP_TYPE        (_AC(0x1FF,UL) << SFSTAT_TRAP_TYPE_SHIFT)
+#define SFSTAT_TRAP_TYPE_SHIFT  33
+#define SFSTAT_AFSR_MASK        (_AC(0x1ffffffff,UL) << SFSTAT_AFSR_SHIFT)
+#define SFSTAT_AFSR_SHIFT       0
+
+/* ESTATE Error Enable Register, ASI=0x4b VA<63:0>=0x0 */
+#define ESTATE_ERR_CE           0x1 /* Correctable errors                    */
+#define ESTATE_ERR_NCE          0x2 /* TO, BERR, LDP, ETP, EDP, WP, UE, IVUE */
+#define ESTATE_ERR_ISAP         0x4 /* System address parity error           */
+#define ESTATE_ERR_ALL          (ESTATE_ERR_CE | \
+                                 ESTATE_ERR_NCE | \
+                                 ESTATE_ERR_ISAP)
+
+/* The various trap types that report using the above state. */
+#define TRAP_TYPE_IAE           0x09 /* Instruction Access Error             */
+#define TRAP_TYPE_DAE           0x32 /* Data Access Error                    */
+#define TRAP_TYPE_CEE           0x63 /* Correctable ECC Error                */
+
+#endif /* _SPARC64_SFAFSR_H */
diff --git a/arch/sparc/include/asm/sfp-machine.h b/arch/sparc/include/asm/sfp-machine.h
new file mode 100644
index 000000000000..4ebc3823ed4f
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SFP_MACHINE_H
+#define ___ASM_SPARC_SFP_MACHINE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sfp-machine_64.h>
+#else
+#include <asm/sfp-machine_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sfp-machine_32.h b/arch/sparc/include/asm/sfp-machine_32.h
new file mode 100644
index 000000000000..01d9c3b5a73b
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine_32.h
@@ -0,0 +1,212 @@
+/* Machine-dependent software floating-point definitions.
+   Sparc userland (_Q_*) version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+                  Jakub Jelinek (jj@ultra.linux.cz),
+                  David S. Miller (davem@redhat.com) and
+                  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+
+#define _FP_W_TYPE_SIZE         32
+#define _FP_W_TYPE              unsigned long
+#define _FP_WS_TYPE             signed long
+#define _FP_I_TYPE              long
+
+#define _FP_MUL_MEAT_S(R,X,Y)                                   \
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)                                   \
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)                                   \
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)   _FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)   _FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)   _FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S           ((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D           ((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q           ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S           0
+#define _FP_NANSIGN_D           0
+#define _FP_NANSIGN_Q           0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)                      \
+  do {                                                          \
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)          \
+        && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))     \
+      {                                                         \
+        R##_s = X##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,X);                                \
+      }                                                         \
+    else                                                        \
+      {                                                         \
+        R##_s = Y##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,Y);                                \
+      }                                                         \
+    R##_c = FP_CLS_NAN;                                         \
+  } while (0)
+
+/* Some assembly to speed things up. */
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)                     \
+  __asm__ ("addcc %r7,%8,%2\n\t"                                        \
+           "addxcc %r5,%6,%1\n\t"                                       \
+           "addx %r3,%4,%0\n"                                           \
+           : "=r" ((USItype)(r2)),                                      \
+             "=&r" ((USItype)(r1)),                                     \
+             "=&r" ((USItype)(r0))                                      \
+           : "%rJ" ((USItype)(x2)),                                     \
+             "rI" ((USItype)(y2)),                                      \
+             "%rJ" ((USItype)(x1)),                                     \
+             "rI" ((USItype)(y1)),                                      \
+             "%rJ" ((USItype)(x0)),                                     \
+             "rI" ((USItype)(y0))                                       \
+           : "cc")
+
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)                     \
+  __asm__ ("subcc %r7,%8,%2\n\t"                                        \
+            "subxcc %r5,%6,%1\n\t"                                      \
+            "subx %r3,%4,%0\n"                                          \
+           : "=r" ((USItype)(r2)),                                      \
+             "=&r" ((USItype)(r1)),                                     \
+             "=&r" ((USItype)(r0))                                      \
+           : "%rJ" ((USItype)(x2)),                                     \
+             "rI" ((USItype)(y2)),                                      \
+             "%rJ" ((USItype)(x1)),                                     \
+             "rI" ((USItype)(y1)),                                      \
+             "%rJ" ((USItype)(x0)),                                     \
+             "rI" ((USItype)(y0))                                       \
+           : "cc")
+
+#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)            \
+  do {                                                                  \
+    /* We need to fool gcc,  as we need to pass more than 10            \
+       input/outputs.  */                                               \
+    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");            \
+    __asm__ __volatile__ (                                              \
+            "addcc %r8,%9,%1\n\t"                                       \
+            "addxcc %r6,%7,%0\n\t"                                      \
+            "addxcc %r4,%5,%%g2\n\t"                                    \
+            "addx %r2,%3,%%g1\n\t"                                      \
+           : "=&r" ((USItype)(r1)),                                     \
+             "=&r" ((USItype)(r0))                                      \
+           : "%rJ" ((USItype)(x3)),                                     \
+             "rI" ((USItype)(y3)),                                      \
+             "%rJ" ((USItype)(x2)),                                     \
+             "rI" ((USItype)(y2)),                                      \
+             "%rJ" ((USItype)(x1)),                                     \
+             "rI" ((USItype)(y1)),                                      \
+             "%rJ" ((USItype)(x0)),                                     \
+             "rI" ((USItype)(y0))                                       \
+           : "cc", "g1", "g2");                                         \
+    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));                 \
+    r3 = _t1; r2 = _t2;                                                 \
+  } while (0)
+
+#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)            \
+  do {                                                                  \
+    /* We need to fool gcc,  as we need to pass more than 10            \
+       input/outputs.  */                                               \
+    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");            \
+    __asm__ __volatile__ (                                              \
+            "subcc %r8,%9,%1\n\t"                                       \
+            "subxcc %r6,%7,%0\n\t"                                      \
+            "subxcc %r4,%5,%%g2\n\t"                                    \
+            "subx %r2,%3,%%g1\n\t"                                      \
+           : "=&r" ((USItype)(r1)),                                     \
+             "=&r" ((USItype)(r0))                                      \
+           : "%rJ" ((USItype)(x3)),                                     \
+             "rI" ((USItype)(y3)),                                      \
+             "%rJ" ((USItype)(x2)),                                     \
+             "rI" ((USItype)(y2)),                                      \
+             "%rJ" ((USItype)(x1)),                                     \
+             "rI" ((USItype)(y1)),                                      \
+             "%rJ" ((USItype)(x0)),                                     \
+             "rI" ((USItype)(y0))                                       \
+           : "cc", "g1", "g2");                                         \
+    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));                 \
+    r3 = _t1; r2 = _t2;                                                 \
+  } while (0)
+
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
+
+#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0) __FP_FRAC_SUB_4(x3,x2,x1,x0,x3,x2,x1,x0,y3,y2,y1,y0)
+
+#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i)                                 \
+  __asm__ ("addcc %3,%4,%3\n\t"                                         \
+           "addxcc %2,%%g0,%2\n\t"                                      \
+           "addxcc %1,%%g0,%1\n\t"                                      \
+           "addx %0,%%g0,%0\n\t"                                        \
+           : "=&r" ((USItype)(x3)),                                     \
+             "=&r" ((USItype)(x2)),                                     \
+             "=&r" ((USItype)(x1)),                                     \
+             "=&r" ((USItype)(x0))                                      \
+           : "rI" ((USItype)(i)),                                       \
+             "0" ((USItype)(x3)),                                       \
+             "1" ((USItype)(x2)),                                       \
+             "2" ((USItype)(x1)),                                       \
+             "3" ((USItype)(x0))                                        \
+           : "cc")
+
+#ifndef CONFIG_SMP
+extern struct task_struct *last_task_used_math;
+#endif
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#ifdef CONFIG_SMP
+#define FP_ROUNDMODE    ((current->thread.fsr >> 30) & 0x3)
+#else
+#define FP_ROUNDMODE    ((last_task_used_math->thread.fsr >> 30) & 0x3)
+#endif
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID           (1 << 4)
+#define FP_EX_OVERFLOW          (1 << 3)
+#define FP_EX_UNDERFLOW         (1 << 2)
+#define FP_EX_DIVZERO           (1 << 1)
+#define FP_EX_INEXACT           (1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#ifdef CONFIG_SMP
+#define FP_INHIBIT_RESULTS ((current->thread.fsr >> 23) & _fex)
+#else
+#define FP_INHIBIT_RESULTS ((last_task_used_math->thread.fsr >> 23) & _fex)
+#endif
+
+#ifdef CONFIG_SMP
+#define FP_TRAPPING_EXCEPTIONS ((current->thread.fsr >> 23) & 0x1f)
+#else
+#define FP_TRAPPING_EXCEPTIONS ((last_task_used_math->thread.fsr >> 23) & 0x1f)
+#endif
+
+#endif
diff --git a/arch/sparc/include/asm/sfp-machine_64.h b/arch/sparc/include/asm/sfp-machine_64.h
new file mode 100644
index 000000000000..ca913ef40bd5
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine_64.h
@@ -0,0 +1,93 @@
+/* Machine-dependent software floating-point definitions.
+   Sparc64 kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+                  Jakub Jelinek (jj@ultra.linux.cz) and
+                  David S. Miller (davem@redhat.com).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+#define _FP_W_TYPE_SIZE         64
+#define _FP_W_TYPE              unsigned long
+#define _FP_WS_TYPE             signed long
+#define _FP_I_TYPE              long
+
+#define _FP_MUL_MEAT_S(R,X,Y)                                   \
+  _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y)
+#define _FP_MUL_MEAT_D(R,X,Y)                                   \
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)                                   \
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)   _FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
+#define _FP_DIV_MEAT_D(R,X,Y)   _FP_DIV_MEAT_1_udiv_norm(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)   _FP_DIV_MEAT_2_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S           ((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D           ((_FP_QNANBIT_D << 1) - 1)
+#define _FP_NANFRAC_Q           ((_FP_QNANBIT_Q << 1) - 1), -1
+#define _FP_NANSIGN_S           0
+#define _FP_NANSIGN_D           0
+#define _FP_NANSIGN_Q           0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)                      \
+  do {                                                          \
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)          \
+        && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))     \
+      {                                                         \
+        R##_s = X##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,X);                                \
+      }                                                         \
+    else                                                        \
+      {                                                         \
+        R##_s = Y##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,Y);                                \
+      }                                                         \
+    R##_c = FP_CLS_NAN;                                         \
+  } while (0)
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#define FP_ROUNDMODE    ((current_thread_info()->xfsr[0] >> 30) & 0x3)
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID           (1 << 4)
+#define FP_EX_OVERFLOW          (1 << 3)
+#define FP_EX_UNDERFLOW         (1 << 2)
+#define FP_EX_DIVZERO           (1 << 1)
+#define FP_EX_INEXACT           (1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#define FP_INHIBIT_RESULTS ((current_thread_info()->xfsr[0] >> 23) & _fex)
+
+#define FP_TRAPPING_EXCEPTIONS ((current_thread_info()->xfsr[0] >> 23) & 0x1f)
+
+#endif
diff --git a/arch/sparc/include/asm/shmbuf.h b/arch/sparc/include/asm/shmbuf.h
new file mode 100644
index 000000000000..83a16055363f
--- /dev/null
+++ b/arch/sparc/include/asm/shmbuf.h
@@ -0,0 +1,50 @@
+#ifndef _SPARC_SHMBUF_H
+#define _SPARC_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+struct shmid64_ds {
+        struct ipc64_perm       shm_perm;       /* operation perms */
+        PADDING(__pad1)
+        __kernel_time_t         shm_atime;      /* last attach time */
+        PADDING(__pad2)
+        __kernel_time_t         shm_dtime;      /* last detach time */
+        PADDING(__pad3)
+        __kernel_time_t         shm_ctime;      /* last change time */
+        size_t                  shm_segsz;      /* size of segment (bytes) */
+        __kernel_pid_t          shm_cpid;       /* pid of creator */
+        __kernel_pid_t          shm_lpid;       /* pid of last operator */
+        unsigned long           shm_nattch;     /* no. of current attaches */
+        unsigned long           __unused1;
+        unsigned long           __unused2;
+};
+
+struct shminfo64 {
+        unsigned long   shmmax;
+        unsigned long   shmmin;
+        unsigned long   shmmni;
+        unsigned long   shmseg;
+        unsigned long   shmall;
+        unsigned long   __unused1;
+        unsigned long   __unused2;
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+
+#undef PADDING
+
+#endif /* _SPARC_SHMBUF_H */
diff --git a/arch/sparc/include/asm/shmparam.h b/arch/sparc/include/asm/shmparam.h
new file mode 100644
index 000000000000..8bf0cfe0694f
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SHMPARAM_H
+#define ___ASM_SPARC_SHMPARAM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/shmparam_64.h>
+#else
+#include <asm/shmparam_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/shmparam_32.h b/arch/sparc/include/asm/shmparam_32.h
new file mode 100644
index 000000000000..59a1243c12f3
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam_32.h
@@ -0,0 +1,11 @@
+#ifndef _ASMSPARC_SHMPARAM_H
+#define _ASMSPARC_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA     1
+
+extern int vac_cache_size;
+#define SHMLBA (vac_cache_size ? vac_cache_size : \
+                (sparc_cpu_model == sun4c ? (64 * 1024) : \
+                 (sparc_cpu_model == sun4 ? (128 * 1024) : PAGE_SIZE)))
+
+#endif /* _ASMSPARC_SHMPARAM_H */
diff --git a/arch/sparc/include/asm/shmparam_64.h b/arch/sparc/include/asm/shmparam_64.h
new file mode 100644
index 000000000000..1ed0d6701a9b
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam_64.h
@@ -0,0 +1,10 @@
+#ifndef _ASMSPARC64_SHMPARAM_H
+#define _ASMSPARC64_SHMPARAM_H
+
+#include <asm/spitfire.h>
+
+#define __ARCH_FORCE_SHMLBA     1
+/* attach addr a multiple of this */
+#define SHMLBA  ((PAGE_SIZE > L1DCACHE_SIZE) ? PAGE_SIZE : L1DCACHE_SIZE)
+
+#endif /* _ASMSPARC64_SHMPARAM_H */
diff --git a/arch/sparc/include/asm/sigcontext.h b/arch/sparc/include/asm/sigcontext.h
new file mode 100644
index 000000000000..e92de7e286b5
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGCONTEXT_H
+#define ___ASM_SPARC_SIGCONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sigcontext_64.h>
+#else
+#include <asm/sigcontext_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sigcontext_32.h b/arch/sparc/include/asm/sigcontext_32.h
new file mode 100644
index 000000000000..c5fb60dcbd75
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext_32.h
@@ -0,0 +1,62 @@
+#ifndef __SPARC_SIGCONTEXT_H
+#define __SPARC_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+
+#define __SUNOS_MAXWIN   31
+
+/* This is what SunOS does, so shall I. */
+struct sigcontext {
+        int sigc_onstack;      /* state to restore */
+        int sigc_mask;         /* sigmask to restore */
+        int sigc_sp;           /* stack pointer */
+        int sigc_pc;           /* program counter */
+        int sigc_npc;          /* next program counter */
+        int sigc_psr;          /* for condition codes etc */
+        int sigc_g1;           /* User uses these two registers */
+        int sigc_o0;           /* within the trampoline code. */
+
+        /* Now comes information regarding the users window set
+         * at the time of the signal.
+         */
+        int sigc_oswins;       /* outstanding windows */
+
+        /* stack ptrs for each regwin buf */
+        char *sigc_spbuf[__SUNOS_MAXWIN];
+
+        /* Windows to restore after signal */
+        struct {
+                unsigned long   locals[8];
+                unsigned long   ins[8];
+        } sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+typedef struct {
+        struct {
+                unsigned long psr;
+                unsigned long pc;
+                unsigned long npc;
+                unsigned long y;
+                unsigned long u_regs[16]; /* globals and ins */
+        }               si_regs;
+        int             si_mask;
+} __siginfo_t;
+
+typedef struct {
+        unsigned   long si_float_regs [32];
+        unsigned   long si_fsr;
+        unsigned   long si_fpqdepth;
+        struct {
+                unsigned long *insn_addr;
+                unsigned long insn;
+        } si_fpqueue [16];
+} __siginfo_fpu_t;
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__SPARC_SIGCONTEXT_H) */
diff --git a/arch/sparc/include/asm/sigcontext_64.h b/arch/sparc/include/asm/sigcontext_64.h
new file mode 100644
index 000000000000..1c868d680cfc
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext_64.h
@@ -0,0 +1,87 @@
+#ifndef __SPARC64_SIGCONTEXT_H
+#define __SPARC64_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef __KERNEL__
+
+#define __SUNOS_MAXWIN   31
+
+/* This is what SunOS does, so shall I unless we use new 32bit signals or rt signals. */
+struct sigcontext32 {
+        int sigc_onstack;      /* state to restore */
+        int sigc_mask;         /* sigmask to restore */
+        int sigc_sp;           /* stack pointer */
+        int sigc_pc;           /* program counter */
+        int sigc_npc;          /* next program counter */
+        int sigc_psr;          /* for condition codes etc */
+        int sigc_g1;           /* User uses these two registers */
+        int sigc_o0;           /* within the trampoline code. */
+
+        /* Now comes information regarding the users window set
+         * at the time of the signal.
+         */
+        int sigc_oswins;       /* outstanding windows */
+
+        /* stack ptrs for each regwin buf */
+        unsigned sigc_spbuf[__SUNOS_MAXWIN];
+
+        /* Windows to restore after signal */
+        struct reg_window32 sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+#endif
+
+#ifdef __KERNEL__
+
+/* This is what we use for 32bit new non-rt signals. */
+
+typedef struct {
+        struct {
+                unsigned int psr;
+                unsigned int pc;
+                unsigned int npc;
+                unsigned int y;
+                unsigned int u_regs[16]; /* globals and ins */
+        }                       si_regs;
+        int                     si_mask;
+} __siginfo32_t;
+
+#endif
+
+typedef struct {
+        unsigned   int si_float_regs [64];
+        unsigned   long si_fsr;
+        unsigned   long si_gsr;
+        unsigned   long si_fprs;
+} __siginfo_fpu_t;
+
+/* This is what SunOS doesn't, so we have to write this alone
+   and do it properly. */
+struct sigcontext {
+        /* The size of this array has to match SI_MAX_SIZE from siginfo.h */
+        char                    sigc_info[128];
+        struct {
+                unsigned long   u_regs[16]; /* globals and ins */
+                unsigned long   tstate;
+                unsigned long   tpc;
+                unsigned long   tnpc;
+                unsigned int    y;
+                unsigned int    fprs;
+        }                       sigc_regs;
+        __siginfo_fpu_t *       sigc_fpu_save;
+        struct {
+                void    *       ss_sp;
+                int             ss_flags;
+                unsigned long   ss_size;
+        }                       sigc_stack;
+        unsigned long           sigc_mask;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_SIGCONTEXT_H) */
diff --git a/arch/sparc/include/asm/siginfo.h b/arch/sparc/include/asm/siginfo.h
new file mode 100644
index 000000000000..bd81f8d7f5ce
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGINFO_H
+#define ___ASM_SPARC_SIGINFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/siginfo_64.h>
+#else
+#include <asm/siginfo_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/siginfo_32.h b/arch/sparc/include/asm/siginfo_32.h
new file mode 100644
index 000000000000..3c71af135c52
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo_32.h
@@ -0,0 +1,17 @@
+#ifndef _SPARC_SIGINFO_H
+#define _SPARC_SIGINFO_H
+
+#define __ARCH_SI_UID_T         unsigned int
+#define __ARCH_SI_TRAPNO
+
+#include <asm-generic/siginfo.h>
+
+#define SI_NOINFO       32767           /* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF      (__SI_FAULT|1)  /* tag overflow */
+#define NSIGEMT         1
+
+#endif /* !(_SPARC_SIGINFO_H) */
diff --git a/arch/sparc/include/asm/siginfo_64.h b/arch/sparc/include/asm/siginfo_64.h
new file mode 100644
index 000000000000..c96e6c30f8b0
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo_64.h
@@ -0,0 +1,32 @@
+#ifndef _SPARC64_SIGINFO_H
+#define _SPARC64_SIGINFO_H
+
+#define SI_PAD_SIZE32   ((SI_MAX_SIZE/sizeof(int)) - 3)
+
+#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#define __ARCH_SI_TRAPNO
+#define __ARCH_SI_BAND_T int
+
+#include <asm-generic/siginfo.h>
+
+#ifdef __KERNEL__
+
+#include <linux/compat.h>
+
+#ifdef CONFIG_COMPAT
+
+struct compat_siginfo;
+
+#endif /* CONFIG_COMPAT */
+
+#endif /* __KERNEL__ */
+
+#define SI_NOINFO       32767           /* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF      (__SI_FAULT|1)  /* tag overflow */
+#define NSIGEMT         1
+
+#endif
diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h
new file mode 100644
index 000000000000..27ab05dc203e
--- /dev/null
+++ b/arch/sparc/include/asm/signal.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGNAL_H
+#define ___ASM_SPARC_SIGNAL_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/signal_64.h>
+#else
+#include <asm/signal_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/signal_32.h b/arch/sparc/include/asm/signal_32.h
new file mode 100644
index 000000000000..96a60ab03ca1
--- /dev/null
+++ b/arch/sparc/include/asm/signal_32.h
@@ -0,0 +1,207 @@
+#ifndef _ASMSPARC_SIGNAL_H
+#define _ASMSPARC_SIGNAL_H
+
+#include <asm/sigcontext.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP           1
+#define SIGINT           2
+#define SIGQUIT          3
+#define SIGILL           4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP          5
+#define SIGABRT          6
+#define SIGIOT           6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE           8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL          9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV         11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS          12
+
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP         17
+#define SIGTSTP         18
+#define SIGCONT         19
+#define SIGCHLD         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGIO           23
+#define SIGPOLL         SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGLOST         29
+#define SIGPWR          SIGLOST
+#define SIGUSR1         30
+#define SIGUSR2         31
+
+/* Most things should be clean enough to redefine this at will, if care
+ * is taken to make libc match.
+ */
+
+#define __OLD_NSIG      32
+#define __NEW_NSIG      64
+#define _NSIG_BPW       32
+#define _NSIG_WORDS     (__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN        32
+#define SIGRTMAX        __NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define _NSIG           __NEW_NSIG
+#define __new_sigset_t  sigset_t
+#define __new_sigaction sigaction
+#define __old_sigset_t  old_sigset_t
+#define __old_sigaction old_sigaction
+#else
+#define _NSIG           __OLD_NSIG
+#define __old_sigset_t  sigset_t
+#define __old_sigaction sigaction
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;
+
+typedef struct {
+        unsigned long   sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+
+#ifdef __KERNEL__
+/* A SunOS sigstack */
+struct sigstack {
+        char *the_stack;
+        int   cur_status;
+};
+#endif
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ */
+#define SA_NOCLDSTOP    _SV_IGNCHILD
+#define SA_STACK        _SV_SSTACK
+#define SA_ONSTACK      _SV_SSTACK
+#define SA_RESTART      _SV_INTR
+#define SA_ONESHOT      _SV_RESET
+#define SA_NOMASK       0x20u
+#define SA_NOCLDWAIT    0x100u
+#define SA_SIGINFO      0x200u
+
+#define SIG_BLOCK          0x01 /* for blocking signals */
+#define SIG_UNBLOCK        0x02 /* for unblocking signals */
+#define SIG_SETMASK        0x04 /* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+
+#define MINSIGSTKSZ     4096
+#define SIGSTKSZ        16384
+
+#ifdef __KERNEL__
+/*
+ * DJHR
+ * SA_STATIC_ALLOC is used for the SPARC system to indicate that this
+ * interrupt handler's irq structure should be statically allocated
+ * by the request_irq routine.
+ * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
+ * of interrupt usage and that sucks. Also without a flag like this
+ * it may be possible for the free_irq routine to attempt to free
+ * statically allocated data.. which is NOT GOOD.
+ *
+ */
+#define SA_STATIC_ALLOC         0x8000
+#endif
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct __new_sigaction {
+        __sighandler_t  sa_handler;
+        unsigned long   sa_flags;
+        void            (*sa_restorer)(void);   /* Not used by Linux/SPARC */
+        __new_sigset_t  sa_mask;
+};
+
+struct k_sigaction {
+        struct __new_sigaction  sa;
+        void                    __user *ka_restorer;
+};
+
+struct __old_sigaction {
+        __sighandler_t  sa_handler;
+        __old_sigset_t  sa_mask;
+        unsigned long   sa_flags;
+        void            (*sa_restorer) (void);  /* not used by Linux/SPARC */
+};
+
+typedef struct sigaltstack {
+        void            __user *ss_sp;
+        int             ss_flags;
+        size_t          ss_size;
+} stack_t;
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/signal_64.h b/arch/sparc/include/asm/signal_64.h
new file mode 100644
index 000000000000..ab1509a101c5
--- /dev/null
+++ b/arch/sparc/include/asm/signal_64.h
@@ -0,0 +1,194 @@
+#ifndef _ASMSPARC64_SIGNAL_H
+#define _ASMSPARC64_SIGNAL_H
+
+#include <asm/sigcontext.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP           1
+#define SIGINT           2
+#define SIGQUIT          3
+#define SIGILL           4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP          5
+#define SIGABRT          6
+#define SIGIOT           6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE           8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL          9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV         11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS          12
+
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP         17
+#define SIGTSTP         18
+#define SIGCONT         19
+#define SIGCHLD         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGIO           23
+#define SIGPOLL         SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGLOST         29
+#define SIGPWR          SIGLOST
+#define SIGUSR1         30
+#define SIGUSR2         31
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define __OLD_NSIG      32
+#define __NEW_NSIG      64
+#define _NSIG_BPW       64
+#define _NSIG_WORDS     (__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN       32
+#define SIGRTMAX       __NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define _NSIG                   __NEW_NSIG
+#define __new_sigset_t          sigset_t
+#define __new_sigaction         sigaction
+#define __new_sigaction32       sigaction32
+#define __old_sigset_t          old_sigset_t
+#define __old_sigaction         old_sigaction
+#define __old_sigaction32       old_sigaction32
+#else
+#define _NSIG                   __OLD_NSIG
+#define NSIG                    _NSIG
+#define __old_sigset_t          sigset_t
+#define __old_sigaction         sigaction
+#define __old_sigaction32       sigaction32
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;            /* at least 32 bits */
+
+typedef struct {
+       unsigned long sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+/* A SunOS sigstack */
+struct sigstack {
+        /* XXX 32-bit pointers pinhead XXX */
+        char *the_stack;
+        int   cur_status;
+};
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ */
+#define SA_NOCLDSTOP    _SV_IGNCHILD
+#define SA_STACK        _SV_SSTACK
+#define SA_ONSTACK      _SV_SSTACK
+#define SA_RESTART      _SV_INTR
+#define SA_ONESHOT      _SV_RESET
+#define SA_NOMASK       0x20u
+#define SA_NOCLDWAIT    0x100u
+#define SA_SIGINFO      0x200u
+
+
+#define SIG_BLOCK          0x01 /* for blocking signals */
+#define SIG_UNBLOCK        0x02 /* for unblocking signals */
+#define SIG_SETMASK        0x04 /* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+
+#define MINSIGSTKSZ     4096
+#define SIGSTKSZ        16384
+
+#include <asm-generic/signal.h>
+
+struct __new_sigaction {
+        __sighandler_t          sa_handler;
+        unsigned long           sa_flags;
+        __sigrestore_t          sa_restorer;  /* not used by Linux/SPARC yet */
+        __new_sigset_t          sa_mask;
+};
+
+struct __old_sigaction {
+        __sighandler_t          sa_handler;
+        __old_sigset_t          sa_mask;
+        unsigned long           sa_flags;
+        void                    (*sa_restorer)(void);     /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack {
+        void                    __user *ss_sp;
+        int                     ss_flags;
+        size_t                  ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+struct k_sigaction {
+        struct __new_sigaction  sa;
+        void __user             *ka_restorer;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC64_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/smp.h b/arch/sparc/include/asm/smp.h
new file mode 100644
index 000000000000..b59672d0e19b
--- /dev/null
+++ b/arch/sparc/include/asm/smp.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SMP_H
+#define ___ASM_SPARC_SMP_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/smp_64.h>
+#else
+#include <asm/smp_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h
new file mode 100644
index 000000000000..7201752cf934
--- /dev/null
+++ b/arch/sparc/include/asm/smp_32.h
@@ -0,0 +1,173 @@
+/* smp.h: Sparc specific SMP stuff.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SMP_H
+#define _SPARC_SMP_H
+
+#include <linux/threads.h>
+#include <asm/head.h>
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/asi.h>
+#include <asm/atomic.h>
+
+/*
+ *      Private routines/data
+ */
+
+extern unsigned char boot_cpu_id;
+extern cpumask_t phys_cpu_present_map;
+#define cpu_possible_map phys_cpu_present_map
+
+typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long,
+                       unsigned long, unsigned long);
+
+/*
+ *      General functions that each host system must provide.
+ */
+
+void sun4m_init_smp(void);
+void sun4d_init_smp(void);
+
+void smp_callin(void);
+void smp_boot_cpus(void);
+void smp_store_cpu_info(int);
+
+struct seq_file;
+void smp_bogo(struct seq_file *);
+void smp_info(struct seq_file *);
+
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
+BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
+BTFIXUPDEF_BLACKBOX(load_current)
+
+#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
+
+static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
+static inline void xc1(smpfunc_t func, unsigned long arg1)
+{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
+static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
+{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
+static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+                           unsigned long arg3)
+{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
+static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+                           unsigned long arg3, unsigned long arg4)
+{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
+static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+                           unsigned long arg3, unsigned long arg4, unsigned long arg5)
+{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
+
+static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
+{
+        xc1((smpfunc_t)func, (unsigned long)info);
+        return 0;
+}
+
+static inline int cpu_logical_map(int cpu)
+{
+        return cpu;
+}
+
+static inline int hard_smp4m_processor_id(void)
+{
+        int cpuid;
+
+        __asm__ __volatile__("rd %%tbr, %0\n\t"
+                             "srl %0, 12, %0\n\t"
+                             "and %0, 3, %0\n\t" :
+                             "=&r" (cpuid));
+        return cpuid;
+}
+
+static inline int hard_smp4d_processor_id(void)
+{
+        int cpuid;
+
+        __asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+                             "=&r" (cpuid) : "i" (ASI_M_VIKING_TMP1));
+        return cpuid;
+}
+
+#ifndef MODULE
+static inline int hard_smp_processor_id(void)
+{
+        int cpuid;
+
+        /* Black box - sun4m
+                __asm__ __volatile__("rd %%tbr, %0\n\t"
+                                     "srl %0, 12, %0\n\t"
+                                     "and %0, 3, %0\n\t" :
+                                     "=&r" (cpuid));
+                     - sun4d
+                __asm__ __volatile__("lda [%g0] ASI_M_VIKING_TMP1, %0\n\t"
+                                     "nop; nop" :
+                                     "=&r" (cpuid));
+           See btfixup.h and btfixupprep.c to understand how a blackbox works.
+         */
+        __asm__ __volatile__("sethi %%hi(___b_hard_smp_processor_id), %0\n\t"
+                             "sethi %%hi(boot_cpu_id), %0\n\t"
+                             "ldub [%0 + %%lo(boot_cpu_id)], %0\n\t" :
+                             "=&r" (cpuid));
+        return cpuid;
+}
+#else
+static inline int hard_smp_processor_id(void)
+{
+        int cpuid;
+
+        __asm__ __volatile__("mov %%o7, %%g1\n\t"
+                             "call ___f___hard_smp_processor_id\n\t"
+                             " nop\n\t"
+                             "mov %%g2, %0\n\t" : "=r"(cpuid) : : "g1", "g2");
+        return cpuid;
+}
+#endif
+
+#define raw_smp_processor_id()          (current_thread_info()->cpu)
+
+#define prof_multiplier(__cpu)          cpu_data(__cpu).multiplier
+#define prof_counter(__cpu)             cpu_data(__cpu).counter
+
+void smp_setup_cpu_possible_map(void);
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Sparc specific messages. */
+#define MSG_CROSS_CALL         0x0005       /* run func on cpus */
+
+/* Empirical PROM processor mailbox constants.  If the per-cpu mailbox
+ * contains something other than one of these then the ipi is from
+ * Linux's active_kernel_processor.  This facility exists so that
+ * the boot monitor can capture all the other cpus when one catches
+ * a watchdog reset or the user enters the monitor using L1-A keys.
+ */
+#define MBOX_STOPCPU          0xFB
+#define MBOX_IDLECPU          0xFC
+#define MBOX_IDLECPU2         0xFD
+#define MBOX_STOPCPU2         0xFE
+
+#else /* SMP */
+
+#define hard_smp_processor_id()         0
+#define smp_setup_cpu_possible_map() do { } while (0)
+
+#endif /* !(SMP) */
+
+#define NO_PROC_ID            0xFF
+
+#endif /* !(_SPARC_SMP_H) */
diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h
new file mode 100644
index 000000000000..57224dd37b3a
--- /dev/null
+++ b/arch/sparc/include/asm/smp_64.h
@@ -0,0 +1,67 @@
+/* smp.h: Sparc64 specific SMP stuff.
+ *
+ * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SMP_H
+#define _SPARC64_SMP_H
+
+#include <linux/threads.h>
+#include <asm/asi.h>
+#include <asm/starfire.h>
+#include <asm/spitfire.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+#include <linux/cache.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+/*
+ *      Private routines/data
+ */
+
+#include <linux/bitops.h>
+#include <asm/atomic.h>
+#include <asm/percpu.h>
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+extern cpumask_t cpu_core_map[NR_CPUS];
+extern int sparc64_multi_core;
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+/*
+ *      General functions that each host system must provide.
+ */
+
+extern int hard_smp_processor_id(void);
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+extern void smp_fill_in_sib_core_maps(void);
+extern void cpu_play_dead(void);
+
+extern void smp_fetch_global_regs(void);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+#endif
+
+#endif /* !(__ASSEMBLY__) */
+
+#else
+
+#define hard_smp_processor_id()         0
+#define smp_fill_in_sib_core_maps() do { } while (0)
+#define smp_fetch_global_regs() do { } while (0)
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* !(_SPARC64_SMP_H) */
diff --git a/arch/sparc/include/asm/smpprim.h b/arch/sparc/include/asm/smpprim.h
new file mode 100644
index 000000000000..eb849d862c64
--- /dev/null
+++ b/arch/sparc/include/asm/smpprim.h
@@ -0,0 +1,54 @@
+/*
+ *  smpprim.h:  SMP locking primitives on the Sparc
+ *
+ *  God knows we won't be actually using this code for some time
+ *  but I thought I'd write it since I knew how.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SMPPRIM_H
+#define __SPARC_SMPPRIM_H
+
+/* Test and set the unsigned byte at ADDR to 1.  Returns the previous
+ * value.  On the Sparc we use the ldstub instruction since it is
+ * atomic.
+ */
+
+static inline __volatile__ char test_and_set(void *addr)
+{
+        char state = 0;
+
+        __asm__ __volatile__("ldstub [%0], %1         ! test_and_set\n\t"
+                             "=r" (addr), "=r" (state) :
+                             "0" (addr), "1" (state) : "memory");
+
+        return state;
+}
+
+/* Initialize a spin-lock. */
+static inline __volatile__ smp_initlock(void *spinlock)
+{
+        /* Unset the lock. */
+        *((unsigned char *) spinlock) = 0;
+
+        return;
+}
+
+/* This routine spins until it acquires the lock at ADDR. */
+static inline __volatile__ smp_lock(void *addr)
+{
+        while(test_and_set(addr) == 0xff)
+                ;
+
+        /* We now have the lock */
+        return;
+}
+
+/* This routine releases the lock at ADDR. */
+static inline __volatile__ smp_unlock(void *addr)
+{
+        *((unsigned char *) addr) = 0;
+}
+
+#endif /* !(__SPARC_SMPPRIM_H) */
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
new file mode 100644
index 000000000000..bf50d0c2d583
--- /dev/null
+++ b/arch/sparc/include/asm/socket.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET      0xffff
+
+#define SO_DEBUG        0x0001
+#define SO_PASSCRED     0x0002
+#define SO_REUSEADDR    0x0004
+#define SO_KEEPALIVE    0x0008
+#define SO_DONTROUTE    0x0010
+#define SO_BROADCAST    0x0020
+#define SO_PEERCRED     0x0040
+#define SO_LINGER       0x0080
+#define SO_OOBINLINE    0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+#define SO_BSDCOMPAT    0x0400
+#define SO_RCVLOWAT     0x0800
+#define SO_SNDLOWAT     0x1000
+#define SO_RCVTIMEO     0x2000
+#define SO_SNDTIMEO     0x4000
+#define SO_ACCEPTCONN   0x8000
+
+#define SO_SNDBUF       0x1001
+#define SO_RCVBUF       0x1002
+#define SO_SNDBUFFORCE  0x100a
+#define SO_RCVBUFFORCE  0x100b
+#define SO_ERROR        0x1007
+#define SO_TYPE         0x1008
+
+/* Linux specific, keep the same. */
+#define SO_NO_CHECK     0x000b
+#define SO_PRIORITY     0x000c
+
+#define SO_BINDTODEVICE 0x000d
+
+#define SO_ATTACH_FILTER        0x001a
+#define SO_DETACH_FILTER        0x001b
+
+#define SO_PEERNAME             0x001c
+#define SO_TIMESTAMP            0x001d
+#define SCM_TIMESTAMP           SO_TIMESTAMP
+
+#define SO_PEERSEC              0x001e
+#define SO_PASSSEC              0x001f
+#define SO_TIMESTAMPNS          0x0021
+#define SCM_TIMESTAMPNS         SO_TIMESTAMPNS
+
+#define SO_MARK                 0x0022
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION              0x5001
+#define SO_SECURITY_ENCRYPTION_TRANSPORT        0x5002
+#define SO_SECURITY_ENCRYPTION_NETWORK          0x5004
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/sparc/include/asm/sockios.h b/arch/sparc/include/asm/sockios.h
new file mode 100644
index 000000000000..990ea746486b
--- /dev/null
+++ b/arch/sparc/include/asm/sockios.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SPARC_SOCKIOS_H
+#define _ASM_SPARC_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN       0x8901
+#define SIOCSPGRP       0x8902
+#define FIOGETOWN       0x8903
+#define SIOCGPGRP       0x8904
+#define SIOCATMARK      0x8905
+#define SIOCGSTAMP      0x8906          /* Get stamp (timeval) */
+#define SIOCGSTAMPNS    0x8907          /* Get stamp (timespec) */
+
+#endif /* !(_ASM_SPARC_SOCKIOS_H) */
+
diff --git a/arch/sparc/include/asm/sparsemem.h b/arch/sparc/include/asm/sparsemem.h
new file mode 100644
index 000000000000..b99d4e4b6d28
--- /dev/null
+++ b/arch/sparc/include/asm/sparsemem.h
@@ -0,0 +1,12 @@
+#ifndef _SPARC64_SPARSEMEM_H
+#define _SPARC64_SPARSEMEM_H
+
+#ifdef __KERNEL__
+
+#define SECTION_SIZE_BITS       30
+#define MAX_PHYSADDR_BITS       42
+#define MAX_PHYSMEM_BITS        42
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(_SPARC64_SPARSEMEM_H) */
diff --git a/arch/sparc/include/asm/spinlock.h b/arch/sparc/include/asm/spinlock.h
new file mode 100644
index 000000000000..f276b0036b2c
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SPINLOCK_H
+#define ___ASM_SPARC_SPINLOCK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/spinlock_64.h>
+#else
+#include <asm/spinlock_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h
new file mode 100644
index 000000000000..de2249b267c6
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_32.h
@@ -0,0 +1,192 @@
+/* spinlock.h: 32-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SPINLOCK_H
+#define __SPARC_SPINLOCK_H
+
+#include <linux/threads.h>      /* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+#include <asm/psr.h>
+
+#define __raw_spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0)
+
+#define __raw_spin_unlock_wait(lock) \
+        do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+        __asm__ __volatile__(
+        "\n1:\n\t"
+        "ldstub [%0], %%g2\n\t"
+        "orcc   %%g2, 0x0, %%g0\n\t"
+        "bne,a  2f\n\t"
+        " ldub  [%0], %%g2\n\t"
+        ".subsection    2\n"
+        "2:\n\t"
+        "orcc   %%g2, 0x0, %%g0\n\t"
+        "bne,a  2b\n\t"
+        " ldub  [%0], %%g2\n\t"
+        "b,a    1b\n\t"
+        ".previous\n"
+        : /* no outputs */
+        : "r" (lock)
+        : "g2", "memory", "cc");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+        unsigned int result;
+        __asm__ __volatile__("ldstub [%1], %0"
+                             : "=r" (result)
+                             : "r" (lock)
+                             : "memory");
+        return (result == 0);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+        __asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory");
+}
+
+/* Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * XXX This might create some problems with my dual spinlock
+ * XXX scheme, deadlocks etc. -DaveM
+ *
+ * Sort of like atomic_t's on Sparc, but even more clever.
+ *
+ *      ------------------------------------
+ *      | 24-bit counter           | wlock |  raw_rwlock_t
+ *      ------------------------------------
+ *       31                       8 7     0
+ *
+ * wlock signifies the one writer is in or somebody is updating
+ * counter. For a writer, if he successfully acquires the wlock,
+ * but counter is non-zero, he has to release the lock and wait,
+ * till both counter and wlock are zero.
+ *
+ * Unfortunately this scheme limits us to ~16,000,000 cpus.
+ */
+static inline void __read_lock(raw_rwlock_t *rw)
+{
+        register raw_rwlock_t *lp asm("g1");
+        lp = rw;
+        __asm__ __volatile__(
+        "mov    %%o7, %%g4\n\t"
+        "call   ___rw_read_enter\n\t"
+        " ldstub        [%%g1 + 3], %%g2\n"
+        : /* no outputs */
+        : "r" (lp)
+        : "g2", "g4", "memory", "cc");
+}
+
+#define __raw_read_lock(lock) \
+do {    unsigned long flags; \
+        local_irq_save(flags); \
+        __read_lock(lock); \
+        local_irq_restore(flags); \
+} while(0)
+
+static inline void __read_unlock(raw_rwlock_t *rw)
+{
+        register raw_rwlock_t *lp asm("g1");
+        lp = rw;
+        __asm__ __volatile__(
+        "mov    %%o7, %%g4\n\t"
+        "call   ___rw_read_exit\n\t"
+        " ldstub        [%%g1 + 3], %%g2\n"
+        : /* no outputs */
+        : "r" (lp)
+        : "g2", "g4", "memory", "cc");
+}
+
+#define __raw_read_unlock(lock) \
+do {    unsigned long flags; \
+        local_irq_save(flags); \
+        __read_unlock(lock); \
+        local_irq_restore(flags); \
+} while(0)
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+        register raw_rwlock_t *lp asm("g1");
+        lp = rw;
+        __asm__ __volatile__(
+        "mov    %%o7, %%g4\n\t"
+        "call   ___rw_write_enter\n\t"
+        " ldstub        [%%g1 + 3], %%g2\n"
+        : /* no outputs */
+        : "r" (lp)
+        : "g2", "g4", "memory", "cc");
+        *(volatile __u32 *)&lp->lock = ~0U;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+        unsigned int val;
+
+        __asm__ __volatile__("ldstub [%1 + 3], %0"
+                             : "=r" (val)
+                             : "r" (&rw->lock)
+                             : "memory");
+
+        if (val == 0) {
+                val = rw->lock & ~0xff;
+                if (val)
+                        ((volatile u8*)&rw->lock)[3] = 0;
+                else
+                        *(volatile u32*)&rw->lock = ~0U;
+        }
+
+        return (val == 0);
+}
+
+static inline int __read_trylock(raw_rwlock_t *rw)
+{
+        register raw_rwlock_t *lp asm("g1");
+        register int res asm("o0");
+        lp = rw;
+        __asm__ __volatile__(
+        "mov    %%o7, %%g4\n\t"
+        "call   ___rw_read_try\n\t"
+        " ldstub        [%%g1 + 3], %%g2\n"
+        : "=r" (res)
+        : "r" (lp)
+        : "g2", "g4", "memory", "cc");
+        return res;
+}
+
+#define __raw_read_trylock(lock) \
+({      unsigned long flags; \
+        int res; \
+        local_irq_save(flags); \
+        res = __read_trylock(lock); \
+        local_irq_restore(flags); \
+        res; \
+})
+
+#define __raw_write_unlock(rw)  do { (rw)->lock = 0; } while(0)
+
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+
+#define _raw_spin_relax(lock)   cpu_relax()
+#define _raw_read_relax(lock)   cpu_relax()
+#define _raw_write_relax(lock)  cpu_relax()
+
+#define __raw_read_can_lock(rw) (!((rw)->lock & 0xff))
+#define __raw_write_can_lock(rw) (!(rw)->lock)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* __SPARC_SPINLOCK_H */
diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h
new file mode 100644
index 000000000000..0006fe9f8c7a
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_64.h
@@ -0,0 +1,250 @@
+/* spinlock.h: 64-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_SPINLOCK_H
+#define __SPARC64_SPINLOCK_H
+
+#include <linux/threads.h>      /* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+/* To get debugging spinlocks which detect and catch
+ * deadlock situations, set CONFIG_DEBUG_SPINLOCK
+ * and rebuild your kernel.
+ */
+
+/* All of these locking primitives are expected to work properly
+ * even in an RMO memory model, which currently is what the kernel
+ * runs in.
+ *
+ * There is another issue.  Because we play games to save cycles
+ * in the non-contention case, we need to be extra careful about
+ * branch targets into the "spinning" code.  They live in their
+ * own section, but the newer V9 branches have a shorter range
+ * than the traditional 32-bit sparc branch variants.  The rule
+ * is that the branches that go into and out of the spinner sections
+ * must be pre-V9 branches.
+ */
+
+#define __raw_spin_is_locked(lp)        ((lp)->lock != 0)
+
+#define __raw_spin_unlock_wait(lp)      \
+        do {    rmb();                  \
+        } while((lp)->lock)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+        unsigned long tmp;
+
+        __asm__ __volatile__(
+"1:     ldstub          [%1], %0\n"
+"       membar          #StoreLoad | #StoreStore\n"
+"       brnz,pn         %0, 2f\n"
+"        nop\n"
+"       .subsection     2\n"
+"2:     ldub            [%1], %0\n"
+"       membar          #LoadLoad\n"
+"       brnz,pt         %0, 2b\n"
+"        nop\n"
+"       ba,a,pt         %%xcc, 1b\n"
+"       .previous"
+        : "=&r" (tmp)
+        : "r" (lock)
+        : "memory");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+        unsigned long result;
+
+        __asm__ __volatile__(
+"       ldstub          [%1], %0\n"
+"       membar          #StoreLoad | #StoreStore"
+        : "=r" (result)
+        : "r" (lock)
+        : "memory");
+
+        return (result == 0UL);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+        __asm__ __volatile__(
+"       membar          #StoreStore | #LoadStore\n"
+"       stb             %%g0, [%0]"
+        : /* No outputs */
+        : "r" (lock)
+        : "memory");
+}
+
+static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
+{
+        unsigned long tmp1, tmp2;
+
+        __asm__ __volatile__(
+"1:     ldstub          [%2], %0\n"
+"       membar          #StoreLoad | #StoreStore\n"
+"       brnz,pn         %0, 2f\n"
+"        nop\n"
+"       .subsection     2\n"
+"2:     rdpr            %%pil, %1\n"
+"       wrpr            %3, %%pil\n"
+"3:     ldub            [%2], %0\n"
+"       membar          #LoadLoad\n"
+"       brnz,pt         %0, 3b\n"
+"        nop\n"
+"       ba,pt           %%xcc, 1b\n"
+"        wrpr           %1, %%pil\n"
+"       .previous"
+        : "=&r" (tmp1), "=&r" (tmp2)
+        : "r"(lock), "r"(flags)
+        : "memory");
+}
+
+/* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */
+
+static void inline __read_lock(raw_rwlock_t *lock)
+{
+        unsigned long tmp1, tmp2;
+
+        __asm__ __volatile__ (
+"1:     ldsw            [%2], %0\n"
+"       brlz,pn         %0, 2f\n"
+"4:      add            %0, 1, %1\n"
+"       cas             [%2], %0, %1\n"
+"       cmp             %0, %1\n"
+"       membar          #StoreLoad | #StoreStore\n"
+"       bne,pn          %%icc, 1b\n"
+"        nop\n"
+"       .subsection     2\n"
+"2:     ldsw            [%2], %0\n"
+"       membar          #LoadLoad\n"
+"       brlz,pt         %0, 2b\n"
+"        nop\n"
+"       ba,a,pt         %%xcc, 4b\n"
+"       .previous"
+        : "=&r" (tmp1), "=&r" (tmp2)
+        : "r" (lock)
+        : "memory");
+}
+
+static int inline __read_trylock(raw_rwlock_t *lock)
+{
+        int tmp1, tmp2;
+
+        __asm__ __volatile__ (
+"1:     ldsw            [%2], %0\n"
+"       brlz,a,pn       %0, 2f\n"
+"        mov            0, %0\n"
+"       add             %0, 1, %1\n"
+"       cas             [%2], %0, %1\n"
+"       cmp             %0, %1\n"
+"       membar          #StoreLoad | #StoreStore\n"
+"       bne,pn          %%icc, 1b\n"
+"        mov            1, %0\n"
+"2:"
+        : "=&r" (tmp1), "=&r" (tmp2)
+        : "r" (lock)
+        : "memory");
+
+        return tmp1;
+}
+
+static void inline __read_unlock(raw_rwlock_t *lock)
+{
+        unsigned long tmp1, tmp2;
+
+        __asm__ __volatile__(
+"       membar  #StoreLoad | #LoadLoad\n"
+"1:     lduw    [%2], %0\n"
+"       sub     %0, 1, %1\n"
+"       cas     [%2], %0, %1\n"
+"       cmp     %0, %1\n"
+"       bne,pn  %%xcc, 1b\n"
+"        nop"
+        : "=&r" (tmp1), "=&r" (tmp2)
+        : "r" (lock)
+        : "memory");
+}
+
+static void inline __write_lock(raw_rwlock_t *lock)
+{
+        unsigned long mask, tmp1, tmp2;
+
+        mask = 0x80000000UL;
+
+        __asm__ __volatile__(
+"1:     lduw            [%2], %0\n"
+"       brnz,pn         %0, 2f\n"
+"4:      or             %0, %3, %1\n"
+"       cas             [%2], %0, %1\n"
+"       cmp             %0, %1\n"
+"       membar          #StoreLoad | #StoreStore\n"
+"       bne,pn          %%icc, 1b\n"
+"        nop\n"
+"       .subsection     2\n"
+"2:     lduw            [%2], %0\n"
+"       membar          #LoadLoad\n"
+"       brnz,pt         %0, 2b\n"
+"        nop\n"
+"       ba,a,pt         %%xcc, 4b\n"
+"       .previous"
+        : "=&r" (tmp1), "=&r" (tmp2)
+        : "r" (lock), "r" (mask)
+        : "memory");
+}
+
+static void inline __write_unlock(raw_rwlock_t *lock)
+{
+        __asm__ __volatile__(
+"       membar          #LoadStore | #StoreStore\n"
+"       stw             %%g0, [%0]"
+        : /* no outputs */
+        : "r" (lock)
+        : "memory");
+}
+
+static int inline __write_trylock(raw_rwlock_t *lock)
+{
+        unsigned long mask, tmp1, tmp2, result;
+
+        mask = 0x80000000UL;
+
+        __asm__ __volatile__(
+"       mov             0, %2\n"
+"1:     lduw            [%3], %0\n"
+"       brnz,pn         %0, 2f\n"
+"        or             %0, %4, %1\n"
+"       cas             [%3], %0, %1\n"
+"       cmp             %0, %1\n"
+"       membar          #StoreLoad | #StoreStore\n"
+"       bne,pn          %%icc, 1b\n"
+"        nop\n"
+"       mov             1, %2\n"
+"2:"
+        : "=&r" (tmp1), "=&r" (tmp2), "=&r" (result)
+        : "r" (lock), "r" (mask)
+        : "memory");
+
+        return result;
+}
+
+#define __raw_read_lock(p)      __read_lock(p)
+#define __raw_read_trylock(p)   __read_trylock(p)
+#define __raw_read_unlock(p)    __read_unlock(p)
+#define __raw_write_lock(p)     __write_lock(p)
+#define __raw_write_unlock(p)   __write_unlock(p)
+#define __raw_write_trylock(p)  __write_trylock(p)
+
+#define __raw_read_can_lock(rw)         (!((rw)->lock & 0x80000000UL))
+#define __raw_write_can_lock(rw)        (!(rw)->lock)
+
+#define _raw_spin_relax(lock)   cpu_relax()
+#define _raw_read_relax(lock)   cpu_relax()
+#define _raw_write_relax(lock)  cpu_relax()
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_SPINLOCK_H) */
diff --git a/arch/sparc/include/asm/spinlock_types.h b/arch/sparc/include/asm/spinlock_types.h
new file mode 100644
index 000000000000..37cbe01c585b
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef __SPARC_SPINLOCK_TYPES_H
+#define __SPARC_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+        volatile unsigned char lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED        { 0 }
+
+typedef struct {
+        volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED          { 0 }
+
+#endif
diff --git a/arch/sparc/include/asm/spitfire.h b/arch/sparc/include/asm/spitfire.h
new file mode 100644
index 000000000000..985ea7e31992
--- /dev/null
+++ b/arch/sparc/include/asm/spitfire.h
@@ -0,0 +1,342 @@
+/* spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SPITFIRE_H
+#define _SPARC64_SPITFIRE_H
+
+#include <asm/asi.h>
+
+/* The following register addresses are accessible via ASI_DMMU
+ * and ASI_IMMU, that is there is a distinct and unique copy of
+ * each these registers for each TLB.
+ */
+#define TSB_TAG_TARGET          0x0000000000000000 /* All chips                         */
+#define TLB_SFSR                0x0000000000000018 /* All chips                         */
+#define TSB_REG                 0x0000000000000028 /* All chips                         */
+#define TLB_TAG_ACCESS          0x0000000000000030 /* All chips                         */
+#define VIRT_WATCHPOINT         0x0000000000000038 /* All chips                         */
+#define PHYS_WATCHPOINT         0x0000000000000040 /* All chips                         */
+#define TSB_EXTENSION_P         0x0000000000000048 /* Ultra-III and later               */
+#define TSB_EXTENSION_S         0x0000000000000050 /* Ultra-III and later, D-TLB only   */
+#define TSB_EXTENSION_N         0x0000000000000058 /* Ultra-III and later               */
+#define TLB_TAG_ACCESS_EXT      0x0000000000000060 /* Ultra-III+ and later              */
+
+/* These registers only exist as one entity, and are accessed
+ * via ASI_DMMU only.
+ */
+#define PRIMARY_CONTEXT         0x0000000000000008
+#define SECONDARY_CONTEXT       0x0000000000000010
+#define DMMU_SFAR               0x0000000000000020
+#define VIRT_WATCHPOINT         0x0000000000000038
+#define PHYS_WATCHPOINT         0x0000000000000040
+
+#define SPITFIRE_HIGHEST_LOCKED_TLBENT  (64 - 1)
+#define CHEETAH_HIGHEST_LOCKED_TLBENT   (16 - 1)
+
+#define L1DCACHE_SIZE           0x4000
+
+#define SUN4V_CHIP_INVALID      0x00
+#define SUN4V_CHIP_NIAGARA1     0x01
+#define SUN4V_CHIP_NIAGARA2     0x02
+#define SUN4V_CHIP_UNKNOWN      0xff
+
+#ifndef __ASSEMBLY__
+
+enum ultra_tlb_layout {
+        spitfire = 0,
+        cheetah = 1,
+        cheetah_plus = 2,
+        hypervisor = 3,
+};
+
+extern enum ultra_tlb_layout tlb_type;
+
+extern int sun4v_chip_type;
+
+extern int cheetah_pcache_forced_on;
+extern void cheetah_enable_pcache(void);
+
+#define sparc64_highest_locked_tlbent() \
+        (tlb_type == spitfire ? \
+         SPITFIRE_HIGHEST_LOCKED_TLBENT : \
+         CHEETAH_HIGHEST_LOCKED_TLBENT)
+
+extern int num_kernel_image_mappings;
+
+/* The data cache is write through, so this just invalidates the
+ * specified line.
+ */
+static inline void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag)
+{
+        __asm__ __volatile__("stxa      %0, [%1] %2\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG));
+}
+
+/* The instruction cache lines are flushed with this, but note that
+ * this does not flush the pipeline.  It is possible for a line to
+ * get flushed but stale instructions to still be in the pipeline,
+ * a flush instruction (to any address) is sufficient to handle
+ * this issue after the line is invalidated.
+ */
+static inline void spitfire_put_icache_tag(unsigned long addr, unsigned long tag)
+{
+        __asm__ __volatile__("stxa      %0, [%1] %2\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (tag), "r" (addr), "i" (ASI_IC_TAG));
+}
+
+static inline unsigned long spitfire_get_dtlb_data(int entry)
+{
+        unsigned long data;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %0"
+                             : "=r" (data)
+                             : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS));
+
+        /* Clear TTE diag bits. */
+        data &= ~0x0003fe0000000000UL;
+
+        return data;
+}
+
+static inline unsigned long spitfire_get_dtlb_tag(int entry)
+{
+        unsigned long tag;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %0"
+                             : "=r" (tag)
+                             : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ));
+        return tag;
+}
+
+static inline void spitfire_put_dtlb_data(int entry, unsigned long data)
+{
+        __asm__ __volatile__("stxa      %0, [%1] %2\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (data), "r" (entry << 3),
+                               "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline unsigned long spitfire_get_itlb_data(int entry)
+{
+        unsigned long data;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %0"
+                             : "=r" (data)
+                             : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS));
+
+        /* Clear TTE diag bits. */
+        data &= ~0x0003fe0000000000UL;
+
+        return data;
+}
+
+static inline unsigned long spitfire_get_itlb_tag(int entry)
+{
+        unsigned long tag;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %0"
+                             : "=r" (tag)
+                             : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ));
+        return tag;
+}
+
+static inline void spitfire_put_itlb_data(int entry, unsigned long data)
+{
+        __asm__ __volatile__("stxa      %0, [%1] %2\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (data), "r" (entry << 3),
+                               "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+static inline void spitfire_flush_dtlb_nucleus_page(unsigned long page)
+{
+        __asm__ __volatile__("stxa      %%g0, [%0] %1\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP));
+}
+
+static inline void spitfire_flush_itlb_nucleus_page(unsigned long page)
+{
+        __asm__ __volatile__("stxa      %%g0, [%0] %1\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Cheetah has "all non-locked" tlb flushes. */
+static inline void cheetah_flush_dtlb_all(void)
+{
+        __asm__ __volatile__("stxa      %%g0, [%0] %1\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (0x80), "i" (ASI_DMMU_DEMAP));
+}
+
+static inline void cheetah_flush_itlb_all(void)
+{
+        __asm__ __volatile__("stxa      %%g0, [%0] %1\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (0x80), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Cheetah has a 4-tlb layout so direct access is a bit different.
+ * The first two TLBs are fully assosciative, hold 16 entries, and are
+ * used only for locked and >8K sized translations.  One exists for
+ * data accesses and one for instruction accesses.
+ *
+ * The third TLB is for data accesses to 8K non-locked translations, is
+ * 2 way assosciative, and holds 512 entries.  The fourth TLB is for
+ * instruction accesses to 8K non-locked translations, is 2 way
+ * assosciative, and holds 128 entries.
+ *
+ * Cheetah has some bug where bogus data can be returned from
+ * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes
+ * the problem for me. -DaveM
+ */
+static inline unsigned long cheetah_get_ldtlb_data(int entry)
+{
+        unsigned long data;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %%g0\n\t"
+                             "ldxa      [%1] %2, %0"
+                             : "=r" (data)
+                             : "r" ((0 << 16) | (entry << 3)),
+                             "i" (ASI_DTLB_DATA_ACCESS));
+
+        return data;
+}
+
+static inline unsigned long cheetah_get_litlb_data(int entry)
+{
+        unsigned long data;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %%g0\n\t"
+                             "ldxa      [%1] %2, %0"
+                             : "=r" (data)
+                             : "r" ((0 << 16) | (entry << 3)),
+                             "i" (ASI_ITLB_DATA_ACCESS));
+
+        return data;
+}
+
+static inline unsigned long cheetah_get_ldtlb_tag(int entry)
+{
+        unsigned long tag;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %0"
+                             : "=r" (tag)
+                             : "r" ((0 << 16) | (entry << 3)),
+                             "i" (ASI_DTLB_TAG_READ));
+
+        return tag;
+}
+
+static inline unsigned long cheetah_get_litlb_tag(int entry)
+{
+        unsigned long tag;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %0"
+                             : "=r" (tag)
+                             : "r" ((0 << 16) | (entry << 3)),
+                             "i" (ASI_ITLB_TAG_READ));
+
+        return tag;
+}
+
+static inline void cheetah_put_ldtlb_data(int entry, unsigned long data)
+{
+        __asm__ __volatile__("stxa      %0, [%1] %2\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (data),
+                               "r" ((0 << 16) | (entry << 3)),
+                               "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline void cheetah_put_litlb_data(int entry, unsigned long data)
+{
+        __asm__ __volatile__("stxa      %0, [%1] %2\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (data),
+                               "r" ((0 << 16) | (entry << 3)),
+                               "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+static inline unsigned long cheetah_get_dtlb_data(int entry, int tlb)
+{
+        unsigned long data;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %%g0\n\t"
+                             "ldxa      [%1] %2, %0"
+                             : "=r" (data)
+                             : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS));
+
+        return data;
+}
+
+static inline unsigned long cheetah_get_dtlb_tag(int entry, int tlb)
+{
+        unsigned long tag;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %0"
+                             : "=r" (tag)
+                             : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ));
+        return tag;
+}
+
+static inline void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb)
+{
+        __asm__ __volatile__("stxa      %0, [%1] %2\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (data),
+                               "r" ((tlb << 16) | (entry << 3)),
+                               "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline unsigned long cheetah_get_itlb_data(int entry)
+{
+        unsigned long data;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %%g0\n\t"
+                             "ldxa      [%1] %2, %0"
+                             : "=r" (data)
+                             : "r" ((2 << 16) | (entry << 3)),
+                               "i" (ASI_ITLB_DATA_ACCESS));
+
+        return data;
+}
+
+static inline unsigned long cheetah_get_itlb_tag(int entry)
+{
+        unsigned long tag;
+
+        __asm__ __volatile__("ldxa      [%1] %2, %0"
+                             : "=r" (tag)
+                             : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ));
+        return tag;
+}
+
+static inline void cheetah_put_itlb_data(int entry, unsigned long data)
+{
+        __asm__ __volatile__("stxa      %0, [%1] %2\n\t"
+                             "membar    #Sync"
+                             : /* No outputs */
+                             : "r" (data), "r" ((2 << 16) | (entry << 3)),
+                               "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC64_SPITFIRE_H) */
diff --git a/arch/sparc/include/asm/sstate.h b/arch/sparc/include/asm/sstate.h
new file mode 100644
index 000000000000..a7c35dbcb281
--- /dev/null
+++ b/arch/sparc/include/asm/sstate.h
@@ -0,0 +1,13 @@
+#ifndef _SPARC64_SSTATE_H
+#define _SPARC64_SSTATE_H
+
+extern void sstate_booting(void);
+extern void sstate_running(void);
+extern void sstate_halt(void);
+extern void sstate_poweroff(void);
+extern void sstate_panic(void);
+extern void sstate_reboot(void);
+
+extern void sun4v_sstate_init(void);
+
+#endif /* _SPARC64_SSTATE_H */
diff --git a/arch/sparc/include/asm/stacktrace.h b/arch/sparc/include/asm/stacktrace.h
new file mode 100644
index 000000000000..6cee39adf6d6
--- /dev/null
+++ b/arch/sparc/include/asm/stacktrace.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_STACKTRACE_H
+#define _SPARC64_STACKTRACE_H
+
+extern void stack_trace_flush(void);
+
+#endif /* _SPARC64_STACKTRACE_H */
diff --git a/arch/sparc/include/asm/starfire.h b/arch/sparc/include/asm/starfire.h
new file mode 100644
index 000000000000..07bafd31e33c
--- /dev/null
+++ b/arch/sparc/include/asm/starfire.h
@@ -0,0 +1,21 @@
+/*
+ * starfire.h: Group all starfire specific code together.
+ *
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC64_STARFIRE_H
+#define _SPARC64_STARFIRE_H
+
+#ifndef __ASSEMBLY__
+
+extern int this_is_starfire;
+
+extern void check_if_starfire(void);
+extern void starfire_cpu_setup(void);
+extern int starfire_hard_smp_processor_id(void);
+extern void starfire_hookup(int);
+extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid);
+
+#endif
+#endif
diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h
new file mode 100644
index 000000000000..d8153013df72
--- /dev/null
+++ b/arch/sparc/include/asm/stat.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STAT_H
+#define ___ASM_SPARC_STAT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/stat_64.h>
+#else
+#include <asm/stat_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/stat_32.h b/arch/sparc/include/asm/stat_32.h
new file mode 100644
index 000000000000..2299e1d5d94c
--- /dev/null
+++ b/arch/sparc/include/asm/stat_32.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC_STAT_H
+#define _SPARC_STAT_H
+
+#include <linux/types.h>
+
+struct __old_kernel_stat {
+        unsigned short st_dev;
+        unsigned short st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+        unsigned long  st_mtime;
+        unsigned long  st_ctime;
+};
+
+struct stat {
+        unsigned short  st_dev;
+        unsigned long   st_ino;
+        unsigned short  st_mode;
+        short           st_nlink;
+        unsigned short  st_uid;
+        unsigned short  st_gid;
+        unsigned short  st_rdev;
+        long            st_size;
+        long            st_atime;
+        unsigned long   st_atime_nsec;
+        long            st_mtime;
+        unsigned long   st_mtime_nsec;
+        long            st_ctime;
+        unsigned long   st_ctime_nsec;
+        long            st_blksize;
+        long            st_blocks;
+        unsigned long   __unused4[2];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat64 {
+        unsigned long long st_dev;
+
+        unsigned long long st_ino;
+
+        unsigned int    st_mode;
+        unsigned int    st_nlink;
+
+        unsigned int    st_uid;
+        unsigned int    st_gid;
+
+        unsigned long long st_rdev;
+
+        unsigned char   __pad3[8];
+
+        long long       st_size;
+        unsigned int    st_blksize;
+
+        unsigned char   __pad4[8];
+        unsigned int    st_blocks;
+
+        unsigned int    st_atime;
+        unsigned int    st_atime_nsec;
+
+        unsigned int    st_mtime;
+        unsigned int    st_mtime_nsec;
+
+        unsigned int    st_ctime;
+        unsigned int    st_ctime_nsec;
+
+        unsigned int    __unused4;
+        unsigned int    __unused5;
+};
+
+#endif
diff --git a/arch/sparc/include/asm/stat_64.h b/arch/sparc/include/asm/stat_64.h
new file mode 100644
index 000000000000..9650fdea847f
--- /dev/null
+++ b/arch/sparc/include/asm/stat_64.h
@@ -0,0 +1,47 @@
+#ifndef _SPARC64_STAT_H
+#define _SPARC64_STAT_H
+
+#include <linux/types.h>
+
+struct stat {
+        unsigned   st_dev;
+        ino_t   st_ino;
+        mode_t  st_mode;
+        short   st_nlink;
+        uid_t   st_uid;
+        gid_t   st_gid;
+        unsigned   st_rdev;
+        off_t   st_size;
+        time_t  st_atime;
+        time_t  st_mtime;
+        time_t  st_ctime;
+        off_t   st_blksize;
+        off_t   st_blocks;
+        unsigned long  __unused4[2];
+};
+
+struct stat64 {
+        unsigned long   st_dev;
+        unsigned long   st_ino;
+        unsigned long   st_nlink;
+
+        unsigned int    st_mode;
+        unsigned int    st_uid;
+        unsigned int    st_gid;
+        unsigned int    __pad0;
+
+        unsigned long   st_rdev;
+        long            st_size;
+        long            st_blksize;
+        long            st_blocks;
+
+        unsigned long   st_atime;
+        unsigned long   st_atime_nsec;
+        unsigned long   st_mtime;
+        unsigned long   st_mtime_nsec;
+        unsigned long   st_ctime;
+        unsigned long   st_ctime_nsec;
+        long            __unused[3];
+};
+
+#endif
diff --git a/arch/sparc/include/asm/statfs.h b/arch/sparc/include/asm/statfs.h
new file mode 100644
index 000000000000..5e937a73743d
--- /dev/null
+++ b/arch/sparc/include/asm/statfs.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STATFS_H
+#define ___ASM_SPARC_STATFS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/statfs_64.h>
+#else
+#include <asm/statfs_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/statfs_32.h b/arch/sparc/include/asm/statfs_32.h
new file mode 100644
index 000000000000..304520fa8863
--- /dev/null
+++ b/arch/sparc/include/asm/statfs_32.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_STATFS_H
+#define _SPARC_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/arch/sparc/include/asm/statfs_64.h b/arch/sparc/include/asm/statfs_64.h
new file mode 100644
index 000000000000..79b3c890a5fa
--- /dev/null
+++ b/arch/sparc/include/asm/statfs_64.h
@@ -0,0 +1,54 @@
+#ifndef _SPARC64_STATFS_H
+#define _SPARC64_STATFS_H
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t fsid_t;
+
+#endif
+
+struct statfs {
+        long f_type;
+        long f_bsize;
+        long f_blocks;
+        long f_bfree;
+        long f_bavail;
+        long f_files;
+        long f_ffree;
+        __kernel_fsid_t f_fsid;
+        long f_namelen;
+        long f_frsize;
+        long f_spare[5];
+};
+
+struct statfs64 {
+        long f_type;
+        long f_bsize;
+        long f_blocks;
+        long f_bfree;
+        long f_bavail;
+        long f_files;
+        long f_ffree;
+        __kernel_fsid_t f_fsid;
+        long f_namelen;
+        long f_frsize;
+        long f_spare[5];
+};
+
+struct compat_statfs64 {
+        __u32 f_type;
+        __u32 f_bsize;
+        __u64 f_blocks;
+        __u64 f_bfree;
+        __u64 f_bavail;
+        __u64 f_files;
+        __u64 f_ffree;
+        __kernel_fsid_t f_fsid;
+        __u32 f_namelen;
+        __u32 f_frsize;
+        __u32 f_spare[5];
+};
+
+#endif
diff --git a/arch/sparc/include/asm/string.h b/arch/sparc/include/asm/string.h
new file mode 100644
index 000000000000..98b72a0c8e6e
--- /dev/null
+++ b/arch/sparc/include/asm/string.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STRING_H
+#define ___ASM_SPARC_STRING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/string_64.h>
+#else
+#include <asm/string_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/string_32.h b/arch/sparc/include/asm/string_32.h
new file mode 100644
index 000000000000..6c5fddb7e6b5
--- /dev/null
+++ b/arch/sparc/include/asm/string_32.h
@@ -0,0 +1,205 @@
+/*
+ * string.h: External definitions for optimized assembly string
+ *           routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC_STRING_H__
+#define __SPARC_STRING_H__
+
+#include <asm/page.h>
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+extern void __memmove(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memcpy(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+#undef memmove
+#define memmove(_to, _from, _n) \
+({ \
+        void *_t = (_to); \
+        __memmove(_t, (_from), (_n)); \
+        _t; \
+})
+
+#define __HAVE_ARCH_MEMCPY
+
+static inline void *__constant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+        extern void __copy_1page(void *, const void *);
+
+        if(n <= 32) {
+                __builtin_memcpy(to, from, n);
+        } else if (((unsigned int) to & 7) != 0) {
+                /* Destination is not aligned on the double-word boundary */
+                __memcpy(to, from, n);
+        } else {
+                switch(n) {
+                case PAGE_SIZE:
+                        __copy_1page(to, from);
+                        break;
+                default:
+                        __memcpy(to, from, n);
+                        break;
+                }
+        }
+        return to;
+}
+
+static inline void *__nonconstant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+        __memcpy(to, from, n);
+        return to;
+}
+
+#undef memcpy
+#define memcpy(t, f, n) \
+(__builtin_constant_p(n) ? \
+ __constant_memcpy((t),(f),(n)) : \
+ __nonconstant_memcpy((t),(f),(n)))
+
+#define __HAVE_ARCH_MEMSET
+
+static inline void *__constant_c_and_count_memset(void *s, char c, __kernel_size_t count)
+{
+        extern void bzero_1page(void *);
+        extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+        if(!c) {
+                if(count == PAGE_SIZE)
+                        bzero_1page(s);
+                else
+                        __bzero(s, count);
+        } else {
+                __memset(s, c, count);
+        }
+        return s;
+}
+
+static inline void *__constant_c_memset(void *s, char c, __kernel_size_t count)
+{
+        extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+        if(!c)
+                __bzero(s, count);
+        else
+                __memset(s, c, count);
+        return s;
+}
+
+static inline void *__nonconstant_memset(void *s, char c, __kernel_size_t count)
+{
+        __memset(s, c, count);
+        return s;
+}
+
+#undef memset
+#define memset(s, c, count) \
+(__builtin_constant_p(c) ? (__builtin_constant_p(count) ? \
+                            __constant_c_and_count_memset((s), (c), (count)) : \
+                            __constant_c_memset((s), (c), (count))) \
+                          : __nonconstant_memset((s), (c), (count)))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2)                                         \
+({                                                                              \
+        extern void *__memscan_zero(void *, size_t);                            \
+        extern void *__memscan_generic(void *, int, size_t);                    \
+        void *__retval, *__addr = (__arg0);                                     \
+        size_t __size = (__arg2);                                               \
+                                                                                \
+        if(__builtin_constant_p(__char) && !(__char))                           \
+                __retval = __memscan_zero(__addr, __size);                      \
+        else                                                                    \
+                __retval = __memscan_generic(__addr, (__char), __size);         \
+                                                                                \
+        __retval;                                                               \
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+
+extern int __strncmp(const char *, const char *, __kernel_size_t);
+
+static inline int __constant_strncmp(const char *src, const char *dest, __kernel_size_t count)
+{
+        register int retval;
+        switch(count) {
+        case 0: return 0;
+        case 1: return (src[0] - dest[0]);
+        case 2: retval = (src[0] - dest[0]);
+                if(!retval && src[0])
+                  retval = (src[1] - dest[1]);
+                return retval;
+        case 3: retval = (src[0] - dest[0]);
+                if(!retval && src[0]) {
+                  retval = (src[1] - dest[1]);
+                  if(!retval && src[1])
+                    retval = (src[2] - dest[2]);
+                }
+                return retval;
+        case 4: retval = (src[0] - dest[0]);
+                if(!retval && src[0]) {
+                  retval = (src[1] - dest[1]);
+                  if(!retval && src[1]) {
+                    retval = (src[2] - dest[2]);
+                    if (!retval && src[2])
+                      retval = (src[3] - dest[3]);
+                  }
+                }
+                return retval;
+        case 5: retval = (src[0] - dest[0]);
+                if(!retval && src[0]) {
+                  retval = (src[1] - dest[1]);
+                  if(!retval && src[1]) {
+                    retval = (src[2] - dest[2]);
+                    if (!retval && src[2]) {
+                      retval = (src[3] - dest[3]);
+                      if (!retval && src[3])
+                        retval = (src[4] - dest[4]);
+                    }
+                  }
+                }
+                return retval;
+        default:
+                retval = (src[0] - dest[0]);
+                if(!retval && src[0]) {
+                  retval = (src[1] - dest[1]);
+                  if(!retval && src[1]) {
+                    retval = (src[2] - dest[2]);
+                    if(!retval && src[2])
+                      retval = __strncmp(src+3,dest+3,count-3);
+                  }
+                }
+                return retval;
+        }
+}
+
+#undef strncmp
+#define strncmp(__arg0, __arg1, __arg2) \
+(__builtin_constant_p(__arg2) ? \
+ __constant_strncmp(__arg0, __arg1, __arg2) : \
+ __strncmp(__arg0, __arg1, __arg2))
+
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC_STRING_H__) */
diff --git a/arch/sparc/include/asm/string_64.h b/arch/sparc/include/asm/string_64.h
new file mode 100644
index 000000000000..43161f2d17eb
--- /dev/null
+++ b/arch/sparc/include/asm/string_64.h
@@ -0,0 +1,83 @@
+/*
+ * string.h: External definitions for optimized assembly string
+ *           routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997,1999 Jakub Jelinek (jakub@redhat.com)
+ */
+
+#ifndef __SPARC64_STRING_H__
+#define __SPARC64_STRING_H__
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+#include <asm/asi.h>
+
+extern void *__memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMSET
+extern void *__builtin_memset(void *,int,__kernel_size_t);
+
+static inline void *__constant_memset(void *s, int c, __kernel_size_t count)
+{
+        extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+        if (!c) {
+                __bzero(s, count);
+                return s;
+        } else
+                return __memset(s, c, count);
+}
+
+#undef memset
+#define memset(s, c, count) \
+((__builtin_constant_p(count) && (count) <= 32) ? \
+ __builtin_memset((s), (c), (count)) : \
+ (__builtin_constant_p(c) ? \
+  __constant_memset((s), (c), (count)) : \
+  __memset((s), (c), (count))))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2)                                 \
+({                                                                      \
+        extern void *__memscan_zero(void *, size_t);                    \
+        extern void *__memscan_generic(void *, int, size_t);            \
+        void *__retval, *__addr = (__arg0);                             \
+        size_t __size = (__arg2);                                       \
+                                                                        \
+        if(__builtin_constant_p(__char) && !(__char))                   \
+                __retval = __memscan_zero(__addr, __size);              \
+        else                                                            \
+                __retval = __memscan_generic(__addr, (__char), __size); \
+                                                                        \
+        __retval;                                                       \
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *, const char *, __kernel_size_t);
+
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC64_STRING_H__) */
diff --git a/arch/sparc/include/asm/sun4paddr.h b/arch/sparc/include/asm/sun4paddr.h
new file mode 100644
index 000000000000..d52985f19f42
--- /dev/null
+++ b/arch/sparc/include/asm/sun4paddr.h
@@ -0,0 +1,56 @@
+/*
+ * sun4paddr.h:  Various physical addresses on sun4 machines
+ *
+ * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
+ * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca)
+ * 
+ * Now supports more sun4's
+ */
+
+#ifndef _SPARC_SUN4PADDR_H
+#define _SPARC_SUN4PADDR_H
+
+#define SUN4_IE_PHYSADDR                0xf5000000
+#define SUN4_UNUSED_PHYSADDR            0
+
+/* these work for me */
+#define SUN4_200_MEMREG_PHYSADDR        0xf4000000
+#define SUN4_200_CLOCK_PHYSADDR         0xf3000000
+#define SUN4_200_BWTWO_PHYSADDR         0xfd000000
+#define SUN4_200_ETH_PHYSADDR           0xf6000000
+#define SUN4_200_SI_PHYSADDR            0xff200000
+
+/* these were here before */
+#define SUN4_300_MEMREG_PHYSADDR        0xf4000000
+#define SUN4_300_CLOCK_PHYSADDR         0xf2000000
+#define SUN4_300_TIMER_PHYSADDR         0xef000000
+#define SUN4_300_ETH_PHYSADDR           0xf9000000
+#define SUN4_300_BWTWO_PHYSADDR         0xfb400000
+#define SUN4_300_DMA_PHYSADDR           0xfa001000
+#define SUN4_300_ESP_PHYSADDR           0xfa000000
+
+/* Are these right? */
+#define SUN4_400_MEMREG_PHYSADDR        0xf4000000
+#define SUN4_400_CLOCK_PHYSADDR         0xf2000000
+#define SUN4_400_TIMER_PHYSADDR         0xef000000
+#define SUN4_400_ETH_PHYSADDR           0xf9000000
+#define SUN4_400_BWTWO_PHYSADDR         0xfb400000
+#define SUN4_400_DMA_PHYSADDR           0xfa001000
+#define SUN4_400_ESP_PHYSADDR           0xfa000000
+
+/* 
+        these are the actual values set and used in the code. Unused items set 
+        to SUN_UNUSED_PHYSADDR 
+ */
+
+extern int sun4_memreg_physaddr; /* memory register (ecc?) */
+extern int sun4_clock_physaddr;  /* system clock */
+extern int sun4_timer_physaddr;  /* timer, where applicable */
+extern int sun4_eth_physaddr;    /* onboard ethernet (ie/le) */
+extern int sun4_si_physaddr;     /* sun3 scsi adapter */
+extern int sun4_bwtwo_physaddr;  /* onboard bw2 */
+extern int sun4_dma_physaddr;    /* scsi dma */
+extern int sun4_esp_physaddr;    /* esp scsi */
+extern int sun4_ie_physaddr;     /* interrupt enable */
+
+#endif /* !(_SPARC_SUN4PADDR_H) */
diff --git a/arch/sparc/include/asm/sun4prom.h b/arch/sparc/include/asm/sun4prom.h
new file mode 100644
index 000000000000..9c8b4cbf629a
--- /dev/null
+++ b/arch/sparc/include/asm/sun4prom.h
@@ -0,0 +1,83 @@
+/*
+ * sun4prom.h -- interface to sun4 PROM monitor.  We don't use most of this,
+ *               so most of these are just placeholders.
+ */
+
+#ifndef _SUN4PROM_H_
+#define _SUN4PROM_H_
+
+/*
+ * Although this looks similar to an romvec for a OpenProm machine, it is 
+ * actually closer to what was used in the Sun2 and Sun3.
+ *
+ * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later.
+ * 
+ * Many of the function prototypes are guesses.  Some are certainly wrong.
+ * Use with care.
+ */
+
+typedef struct {
+        char            *initSP;                /* Initial system stack ptr */
+        void            (*startmon)(void);      /* Initial PC for hardware */
+        int             *diagberr;              /* Bus err handler for diags */
+        struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */
+        unsigned int    *memorysize;            /* Usable memory in bytes */
+        unsigned char   (*getchar)(void);       /* Get char from input device */ 
+        void            (*putchar)(char);       /* Put char to output device */
+        int             (*mayget)(void);        /* Maybe get char, or -1 */
+        int             (*mayput)(int);         /* Maybe put char, or -1 */
+        unsigned char   *echo;                  /* Should getchar echo? */
+        unsigned char   *insource;              /* Input source selector */
+        unsigned char   *outsink;               /* Output sink selector */
+        int             (*getkey)(void);        /* Get next key if one exists */
+        void            (*initgetkey)(void);    /* Initialize get key */
+        unsigned int    *translation;           /* Kbd translation selector */
+        unsigned char   *keybid;                /* Keyboard ID byte */
+        int             *screen_x;              /* V2: Screen x pos (r/o) */
+        int             *screen_y;              /* V2: Screen y pos (r/o) */
+        struct keybuf   *keybuf;                /* Up/down keycode buffer */
+        char            *monid;                 /* Monitor version ID */
+        void            (*fbwritechar)(char);   /* Write a character to FB */
+        int             *fbAddr;                /* Address of frame buffer */
+        char            **font;                 /* Font table for FB */
+        void            (*fbwritestr)(char *);  /* Write string to FB */
+        void            (*reboot)(char *);      /* e.g. reboot("sd()vmlinux") */
+        unsigned char   *linebuf;               /* The line input buffer */
+        unsigned char   **lineptr;              /* Cur pointer into linebuf */
+        int             *linesize;              /* length of line in linebuf */
+        void            (*getline)(char *);     /* Get line from user */
+        unsigned char   (*getnextchar)(void);   /* Get next char from linebuf */
+        unsigned char   (*peeknextchar)(void);  /* Peek at next char */
+        int             *fbthere;               /* =1 if frame buffer there */
+        int             (*getnum)(void);        /* Grab hex num from line */
+        int             (*printf)(char *, ...); /* See prom_printf() instead */ 
+        void            (*printhex)(int);       /* Format N digits in hex */
+        unsigned char   *leds;                  /* RAM copy of LED register */
+        void            (*setLEDs)(unsigned char *);    /* Sets LED's and RAM copy */
+        void            (*NMIaddr)(void *);     /* Addr for level 7 vector */
+        void            (*abortentry)(void);    /* Entry for keyboard abort */
+        int             *nmiclock;              /* Counts up in msec */
+        int             *FBtype;                /* Frame buffer type */
+        unsigned int    romvecversion;          /* Version number for this romvec */
+        struct globram  *globram;               /* monitor global variables ??? */
+        void *          kbdaddr;                /* Addr of keyboard in use */
+        int             *keyrinit;              /* ms before kbd repeat */
+        unsigned char   *keyrtick;              /* ms between repetitions */
+        unsigned int    *memoryavail;           /* V1: Main mem usable size */
+        long            *resetaddr;             /* where to jump on a reset */
+        long            *resetmap;              /* pgmap entry for resetaddr */
+        void            (*exittomon)(void);     /* Exit from user program */
+        unsigned char   **memorybitmap;         /* V1: &{0 or &bits} */
+        void            (*setcxsegmap)(int ctxt, char *va, int pmeg);   /* Set seg in any context */
+        void            (**vector_cmd)(void *); /* V2: Handler for 'v' cmd */
+        unsigned long   *expectedtrapsig;       /* V3: Location of the expected trap signal */
+        unsigned long   *trapvectorbasetable;   /* V3: Address of the trap vector table */
+        int             unused1;
+        int             unused2;
+        int             unused3;
+        int             unused4;
+} linux_sun4_romvec;
+
+extern linux_sun4_romvec *sun4_romvec;
+
+#endif /* _SUN4PROM_H_ */
diff --git a/arch/sparc/include/asm/sunbpp.h b/arch/sparc/include/asm/sunbpp.h
new file mode 100644
index 000000000000..d81a02eaf78b
--- /dev/null
+++ b/arch/sparc/include/asm/sunbpp.h
@@ -0,0 +1,80 @@
+/*
+ * include/asm/sunbpp.h
+ */
+
+#ifndef _ASM_SPARC_SUNBPP_H
+#define _ASM_SPARC_SUNBPP_H
+
+struct bpp_regs {
+  /* DMA registers */
+  __volatile__ __u32 p_csr;             /* DMA Control/Status Register */
+  __volatile__ __u32 p_addr;            /* Address Register */
+  __volatile__ __u32 p_bcnt;            /* Byte Count Register */
+  __volatile__ __u32 p_tst_csr;         /* Test Control/Status (DMA2 only) */
+  /* Parallel Port registers */
+  __volatile__ __u16 p_hcr;             /* Hardware Configuration Register */
+  __volatile__ __u16 p_ocr;             /* Operation Configuration Register */
+  __volatile__ __u8 p_dr;               /* Parallel Data Register */
+  __volatile__ __u8 p_tcr;              /* Transfer Control Register */
+  __volatile__ __u8 p_or;               /* Output Register */
+  __volatile__ __u8 p_ir;               /* Input Register */
+  __volatile__ __u16 p_icr;             /* Interrupt Control Register */
+};
+
+/* P_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
+#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
+#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
+
+/* P_OCR. */
+#define P_OCR_MEM_CLR   0x8000
+#define P_OCR_DATA_SRC  0x4000      /* )                  */
+#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
+#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
+#define P_OCR_ACK_DSEL  0x0800      /* )                  */
+#define P_OCR_EN_DIAG   0x0400
+#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
+#define P_OCR_ACK_OP    0x0100      /* Ack operation */
+#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
+
+/* P_TCR */
+#define P_TCR_DIR       0x08
+#define P_TCR_BUSY      0x04
+#define P_TCR_ACK       0x02
+#define P_TCR_DS        0x01        /* Strobe */
+
+/* P_OR */
+#define P_OR_V3         0x20        /* )                 */
+#define P_OR_V2         0x10        /* ) on Zebra only   */
+#define P_OR_V1         0x08        /* )                 */
+#define P_OR_INIT       0x04
+#define P_OR_AFXN       0x02        /* Auto Feed */
+#define P_OR_SLCT_IN    0x01
+
+/* P_IR */
+#define P_IR_PE         0x04
+#define P_IR_SLCT       0x02
+#define P_IR_ERR        0x01
+
+/* P_ICR */
+#define P_DS_IRQ        0x8000      /* RW1  */
+#define P_ACK_IRQ       0x4000      /* RW1  */
+#define P_BUSY_IRQ      0x2000      /* RW1  */
+#define P_PE_IRQ        0x1000      /* RW1  */
+#define P_SLCT_IRQ      0x0800      /* RW1  */
+#define P_ERR_IRQ       0x0400      /* RW1  */
+#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
+#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
+#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
+#define P_BUSY_IRQ_EN   0x0040      /* RW   */
+#define P_PE_IRP        0x0020      /* RW   1= rising edge */
+#define P_PE_IRQ_EN     0x0010      /* RW   */
+#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
+#define P_SLCT_IRQ_EN   0x0004      /* RW   */
+#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
+#define P_ERR_IRQ_EN    0x0001      /* RW   */
+
+#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/arch/sparc/include/asm/swift.h b/arch/sparc/include/asm/swift.h
new file mode 100644
index 000000000000..e535061bf755
--- /dev/null
+++ b/arch/sparc/include/asm/swift.h
@@ -0,0 +1,106 @@
+/* swift.h: Specific definitions for the _broken_ Swift SRMMU
+ *          MMU module.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SWIFT_H
+#define _SPARC_SWIFT_H
+
+/* Swift is so brain damaged, here is the mmu control register. */
+#define SWIFT_ST       0x00800000   /* SW tablewalk enable */
+#define SWIFT_WP       0x00400000   /* Watchpoint enable   */
+
+/* Branch folding (buggy, disable on production systems!)  */
+#define SWIFT_BF       0x00200000
+#define SWIFT_PMC      0x00180000   /* Page mode control   */
+#define SWIFT_PE       0x00040000   /* Parity enable       */
+#define SWIFT_PC       0x00020000   /* Parity control      */
+#define SWIFT_AP       0x00010000   /* Graphics page mode control (TCX/SX) */
+#define SWIFT_AC       0x00008000   /* Alternate Cacheability (see viking.h) */
+#define SWIFT_BM       0x00004000   /* Boot mode */
+#define SWIFT_RC       0x00003c00   /* DRAM refresh control */
+#define SWIFT_IE       0x00000200   /* Instruction cache enable */
+#define SWIFT_DE       0x00000100   /* Data cache enable */
+#define SWIFT_SA       0x00000080   /* Store Allocate */
+#define SWIFT_NF       0x00000002   /* No fault mode */
+#define SWIFT_EN       0x00000001   /* MMU enable */
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void swift_inv_insn_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" (addr), "i" (ASI_M_TXTC_TAG)
+                             : "memory");
+}
+
+/* Bits [12:4] select one of 512 data cache tags */
+static inline void swift_inv_data_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" (addr), "i" (ASI_M_DATAC_TAG)
+                             : "memory");
+}
+
+static inline void swift_flush_dcache(void)
+{
+        unsigned long addr;
+
+        for (addr = 0; addr < 0x2000; addr += 0x10)
+                swift_inv_data_tag(addr);
+}
+
+static inline void swift_flush_icache(void)
+{
+        unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                swift_inv_insn_tag(addr);
+}
+
+static inline void swift_idflash_clear(void)
+{
+        unsigned long addr;
+
+        for (addr = 0; addr < 0x2000; addr += 0x10) {
+                swift_inv_insn_tag(addr<<1);
+                swift_inv_data_tag(addr);
+        }
+}
+
+/* Swift is so broken, it isn't even safe to use the following. */
+static inline void swift_flush_page(unsigned long page)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+                             : "memory");
+}
+
+static inline void swift_flush_segment(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" (addr), "i" (ASI_M_FLUSH_SEG)
+                             : "memory");
+}
+
+static inline void swift_flush_region(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" (addr), "i" (ASI_M_FLUSH_REGION)
+                             : "memory");
+}
+
+static inline void swift_flush_context(void)
+{
+        __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+                             : /* no outputs */
+                             : "i" (ASI_M_FLUSH_CTX)
+                             : "memory");
+}
+
+#endif /* !(_SPARC_SWIFT_H) */
diff --git a/arch/sparc/include/asm/syscall.h b/arch/sparc/include/asm/syscall.h
new file mode 100644
index 000000000000..7486c605e23c
--- /dev/null
+++ b/arch/sparc/include/asm/syscall.h
@@ -0,0 +1,120 @@
+#ifndef __ASM_SPARC_SYSCALL_H
+#define __ASM_SPARC_SYSCALL_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in %g1 */
+static inline long syscall_get_nr(struct task_struct *task,
+                                  struct pt_regs *regs)
+{
+        int syscall_p = pt_regs_is_syscall(regs);
+
+        return (syscall_p ? regs->u_regs[UREG_G1] : -1L);
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+                                    struct pt_regs *regs)
+{
+        /* XXX This needs some thought.  On Sparc we don't
+         * XXX save away the original %o0 value somewhere.
+         * XXX Instead we hold it in register %l5 at the top
+         * XXX level trap frame and pass this down to the signal
+         * XXX dispatch code which is the only place that value
+         * XXX ever was needed.
+         */
+}
+
+#ifdef CONFIG_SPARC32
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+        return (regs->psr & PSR_C) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+        regs->psr |= PSR_C;
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+        regs->psr &= ~PSR_C;
+}
+#else
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+        return (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+        regs->tstate |= (TSTATE_XCARRY | TSTATE_ICARRY);
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+        regs->tstate &= ~(TSTATE_XCARRY | TSTATE_ICARRY);
+}
+#endif
+
+static inline long syscall_get_error(struct task_struct *task,
+                                     struct pt_regs *regs)
+{
+        long val = regs->u_regs[UREG_I0];
+
+        return (syscall_has_error(regs) ? -val : 0);
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+                                            struct pt_regs *regs)
+{
+        long val = regs->u_regs[UREG_I0];
+
+        return val;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+                                            struct pt_regs *regs,
+                                            int error, long val)
+{
+        if (error) {
+                syscall_set_error(regs);
+                regs->u_regs[UREG_I0] = -error;
+        } else {
+                syscall_clear_error(regs);
+                regs->u_regs[UREG_I0] = val;
+        }
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+                                         struct pt_regs *regs,
+                                         unsigned int i, unsigned int n,
+                                         unsigned long *args)
+{
+        int zero_extend = 0;
+        unsigned int j;
+
+#ifdef CONFIG_SPARC64
+        if (test_tsk_thread_flag(task, TIF_32BIT))
+                zero_extend = 1;
+#endif
+
+        for (j = 0; j < n; j++) {
+                unsigned long val = regs->u_regs[UREG_I0 + i + j];
+
+                if (zero_extend)
+                        args[j] = (u32) val;
+                else
+                        args[j] = val;
+        }
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+                                         struct pt_regs *regs,
+                                         unsigned int i, unsigned int n,
+                                         const unsigned long *args)
+{
+        unsigned int j;
+
+        for (j = 0; j < n; j++)
+                regs->u_regs[UREG_I0 + i + j] = args[j];
+}
+
+#endif /* __ASM_SPARC_SYSCALL_H */
diff --git a/arch/sparc/include/asm/syscalls.h b/arch/sparc/include/asm/syscalls.h
new file mode 100644
index 000000000000..45a43f637a14
--- /dev/null
+++ b/arch/sparc/include/asm/syscalls.h
@@ -0,0 +1,13 @@
+#ifndef _SPARC64_SYSCALLS_H
+#define _SPARC64_SYSCALLS_H
+
+struct pt_regs;
+
+extern asmlinkage long sparc_do_fork(unsigned long clone_flags,
+                                     unsigned long stack_start,
+                                     struct pt_regs *regs,
+                                     unsigned long stack_size);
+
+extern asmlinkage int sparc_execve(struct pt_regs *regs);
+
+#endif /* _SPARC64_SYSCALLS_H */
diff --git a/arch/sparc/include/asm/sysen.h b/arch/sparc/include/asm/sysen.h
new file mode 100644
index 000000000000..6af34abde6e7
--- /dev/null
+++ b/arch/sparc/include/asm/sysen.h
@@ -0,0 +1,15 @@
+/*
+ * sysen.h:  Bit fields within the "System Enable" register accessed via
+ *           the ASI_CONTROL address space at address AC_SYSENABLE.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SYSEN_H
+#define _SPARC_SYSEN_H
+
+#define SENABLE_DVMA   0x20   /* enable dvma transfers */
+#define SENABLE_CACHE  0x10   /* enable VAC cache */
+#define SENABLE_RESET  0x04   /* reset whole machine, danger Will Robinson */
+
+#endif /* _SPARC_SYSEN_H */
diff --git a/arch/sparc/include/asm/system.h b/arch/sparc/include/asm/system.h
new file mode 100644
index 000000000000..7944a7cfc996
--- /dev/null
+++ b/arch/sparc/include/asm/system.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SYSTEM_H
+#define ___ASM_SPARC_SYSTEM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/system_64.h>
+#else
+#include <asm/system_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h
new file mode 100644
index 000000000000..b4b024445fc9
--- /dev/null
+++ b/arch/sparc/include/asm/system_32.h
@@ -0,0 +1,288 @@
+#ifndef __SPARC_SYSTEM_H
+#define __SPARC_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <linux/threads.h>      /* NR_CPUS */
+#include <linux/thread_info.h>
+
+#include <asm/page.h>
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/btfixup.h>
+#include <asm/smp.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/irqflags.h>
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+
+/* Really, userland should not be looking at any of this... */
+#ifdef __KERNEL__
+
+extern enum sparc_cpu sparc_cpu_model;
+
+#ifndef CONFIG_SUN4
+#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
+#define ARCH_SUN4 0
+#else
+#define ARCH_SUN4C_SUN4 1
+#define ARCH_SUN4 1
+#endif
+
+#define SUN4M_NCPUS            4              /* Architectural limit of sun4m. */
+
+extern char reboot_command[];
+
+extern struct thread_info *current_set[NR_CPUS];
+
+extern unsigned long empty_bad_page;
+extern unsigned long empty_bad_page_table;
+extern unsigned long empty_zero_page;
+
+extern void sun_do_break(void);
+extern int serial_console;
+extern int stop_a_enabled;
+
+static inline int con_is_present(void)
+{
+        return serial_console ? 0 : 1;
+}
+
+/* When a context switch happens we must flush all user windows so that
+ * the windows of the current process are flushed onto its stack. This
+ * way the windows are all clean for the next process and the stack
+ * frames are up to date.
+ */
+extern void flush_user_windows(void);
+extern void kill_user_windows(void);
+extern void synchronize_user_stack(void);
+extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
+                   void *fpqueue, unsigned long *fpqdepth);
+
+#ifdef CONFIG_SMP
+#define SWITCH_ENTER(prv) \
+        do {                    \
+        if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
+                put_psr(get_psr() | PSR_EF); \
+                fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
+                       &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
+                clear_tsk_thread_flag(prv, TIF_USEDFPU); \
+                (prv)->thread.kregs->psr &= ~PSR_EF; \
+        } \
+        } while(0)
+
+#define SWITCH_DO_LAZY_FPU(next)        /* */
+#else
+#define SWITCH_ENTER(prv)               /* */
+#define SWITCH_DO_LAZY_FPU(nxt) \
+        do {                    \
+        if (last_task_used_math != (nxt))               \
+                (nxt)->thread.kregs->psr&=~PSR_EF;      \
+        } while(0)
+#endif
+
+extern void flushw_all(void);
+
+/*
+ * Flush windows so that the VM switch which follows
+ * would not pull the stack from under us.
+ *
+ * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
+ * XXX WTF is the above comment? Found in late teen 2.4.x.
+ */
+#define prepare_arch_switch(next) do { \
+        __asm__ __volatile__( \
+        ".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
+        "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+        "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+        "save %sp, -0x40, %sp\n\t" \
+        "restore; restore; restore; restore; restore; restore; restore"); \
+} while(0)
+
+        /* Much care has gone into this code, do not touch it.
+         *
+         * We need to loadup regs l0/l1 for the newly forked child
+         * case because the trap return path relies on those registers
+         * holding certain values, gcc is told that they are clobbered.
+         * Gcc needs registers for 3 values in and 1 value out, so we
+         * clobber every non-fixed-usage register besides l2/l3/o4/o5.  -DaveM
+         *
+         * Hey Dave, that do not touch sign is too much of an incentive
+         * - Anton & Pete
+         */
+#define switch_to(prev, next, last) do {                                                \
+        SWITCH_ENTER(prev);                                                             \
+        SWITCH_DO_LAZY_FPU(next);                                                       \
+        cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask);                      \
+        __asm__ __volatile__(                                                           \
+        "sethi  %%hi(here - 0x8), %%o7\n\t"                                             \
+        "mov    %%g6, %%g3\n\t"                                                         \
+        "or     %%o7, %%lo(here - 0x8), %%o7\n\t"                                       \
+        "rd     %%psr, %%g4\n\t"                                                        \
+        "std    %%sp, [%%g6 + %4]\n\t"                                                  \
+        "rd     %%wim, %%g5\n\t"                                                        \
+        "wr     %%g4, 0x20, %%psr\n\t"                                                  \
+        "nop\n\t"                                                                       \
+        "std    %%g4, [%%g6 + %3]\n\t"                                                  \
+        "ldd    [%2 + %3], %%g4\n\t"                                                    \
+        "mov    %2, %%g6\n\t"                                                           \
+        ".globl patchme_store_new_current\n"                                            \
+"patchme_store_new_current:\n\t"                                                        \
+        "st     %2, [%1]\n\t"                                                           \
+        "wr     %%g4, 0x20, %%psr\n\t"                                                  \
+        "nop\n\t"                                                                       \
+        "nop\n\t"                                                                       \
+        "nop\n\t"       /* LEON needs all 3 nops: load to %sp depends on CWP. */                \
+        "ldd    [%%g6 + %4], %%sp\n\t"                                                  \
+        "wr     %%g5, 0x0, %%wim\n\t"                                                   \
+        "ldd    [%%sp + 0x00], %%l0\n\t"                                                \
+        "ldd    [%%sp + 0x38], %%i6\n\t"                                                \
+        "wr     %%g4, 0x0, %%psr\n\t"                                                   \
+        "nop\n\t"                                                                       \
+        "nop\n\t"                                                                       \
+        "jmpl   %%o7 + 0x8, %%g0\n\t"                                                   \
+        " ld    [%%g3 + %5], %0\n\t"                                                    \
+        "here:\n"                                                                       \
+        : "=&r" (last)                                                                  \
+        : "r" (&(current_set[hard_smp_processor_id()])),        \
+          "r" (task_thread_info(next)),                         \
+          "i" (TI_KPSR),                                        \
+          "i" (TI_KSP),                                         \
+          "i" (TI_TASK)                                         \
+        :       "g1", "g2", "g3", "g4", "g5",       "g7",       \
+          "l0", "l1",       "l3", "l4", "l5", "l6", "l7",       \
+          "i0", "i1", "i2", "i3", "i4", "i5",                   \
+          "o0", "o1", "o2", "o3",                   "o7");      \
+        } while(0)
+
+/* XXX Change this if we ever use a PSO mode kernel. */
+#define mb()    __asm__ __volatile__ ("" : : : "memory")
+#define rmb()   mb()
+#define wmb()   mb()
+#define read_barrier_depends()  do { } while(0)
+#define set_mb(__var, __value)  do { __var = __value; mb(); } while(0)
+#define smp_mb()        __asm__ __volatile__("":::"memory")
+#define smp_rmb()       __asm__ __volatile__("":::"memory")
+#define smp_wmb()       __asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()      do { } while(0)
+
+#define nop() __asm__ __volatile__ ("nop")
+
+/* This has special calling conventions */
+#ifndef CONFIG_SMP
+BTFIXUPDEF_CALL(void, ___xchg32, void)
+#endif
+
+static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
+{
+#ifdef CONFIG_SMP
+        __asm__ __volatile__("swap [%2], %0"
+                             : "=&r" (val)
+                             : "0" (val), "r" (m)
+                             : "memory");
+        return val;
+#else
+        register unsigned long *ptr asm("g1");
+        register unsigned long ret asm("g2");
+
+        ptr = (unsigned long *) m;
+        ret = val;
+
+        /* Note: this is magic and the nop there is
+           really needed. */
+        __asm__ __volatile__(
+        "mov    %%o7, %%g4\n\t"
+        "call   ___f____xchg32\n\t"
+        " nop\n\t"
+        : "=&r" (ret)
+        : "0" (ret), "r" (ptr)
+        : "g3", "g4", "g7", "memory", "cc");
+
+        return ret;
+#endif
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
+{
+        switch (size) {
+        case 4:
+                return xchg_u32(ptr, x);
+        };
+        __xchg_called_with_bad_pointer();
+        return x;
+}
+
+/* Emulate cmpxchg() the same way we emulate atomics,
+ * by hashing the object address and indexing into an array
+ * of spinlocks to get a bit of performance...
+ *
+ * See arch/sparc/lib/atomic32.c for implementation.
+ *
+ * Cribbed from <asm-parisc/atomic.h>
+ */
+#define __HAVE_ARCH_CMPXCHG     1
+
+/* bug catcher for when unsupported size is used - won't link */
+extern void __cmpxchg_called_with_bad_pointer(void);
+/* we only need to support cmpxchg of a u32 on sparc */
+extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_);
+
+/* don't worry...optimizer will get rid of most of this */
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
+{
+        switch (size) {
+        case 4:
+                return __cmpxchg_u32((u32 *)ptr, (u32)old, (u32)new_);
+        default:
+                __cmpxchg_called_with_bad_pointer();
+                break;
+        }
+        return old;
+}
+
+#define cmpxchg(ptr, o, n)                                              \
+({                                                                      \
+        __typeof__(*(ptr)) _o_ = (o);                                   \
+        __typeof__(*(ptr)) _n_ = (n);                                   \
+        (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,       \
+                        (unsigned long)_n_, sizeof(*(ptr)));            \
+})
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)                                               \
+        ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+                        (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC_SYSTEM_H) */
diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
new file mode 100644
index 000000000000..db9e742a406a
--- /dev/null
+++ b/arch/sparc/include/asm/system_64.h
@@ -0,0 +1,355 @@
+#ifndef __SPARC64_SYSTEM_H
+#define __SPARC64_SYSTEM_H
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/visasm.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/irqflags.h>
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+
+#define sparc_cpu_model sun4u
+
+/* This cannot ever be a sun4c nor sun4 :) That's just history. */
+#define ARCH_SUN4C_SUN4 0
+#define ARCH_SUN4 0
+
+extern char reboot_command[];
+
+/* These are here in an effort to more fully work around Spitfire Errata
+ * #51.  Essentially, if a memory barrier occurs soon after a mispredicted
+ * branch, the chip can stop executing instructions until a trap occurs.
+ * Therefore, if interrupts are disabled, the chip can hang forever.
+ *
+ * It used to be believed that the memory barrier had to be right in the
+ * delay slot, but a case has been traced recently wherein the memory barrier
+ * was one instruction after the branch delay slot and the chip still hung.
+ * The offending sequence was the following in sym_wakeup_done() of the
+ * sym53c8xx_2 driver:
+ *
+ *      call    sym_ccb_from_dsa, 0
+ *       movge  %icc, 0, %l0
+ *      brz,pn  %o0, .LL1303
+ *       mov    %o0, %l2
+ *      membar  #LoadLoad
+ *
+ * The branch has to be mispredicted for the bug to occur.  Therefore, we put
+ * the memory barrier explicitly into a "branch always, predicted taken"
+ * delay slot to avoid the problem case.
+ */
+#define membar_safe(type) \
+do {    __asm__ __volatile__("ba,pt     %%xcc, 1f\n\t" \
+                             " membar   " type "\n" \
+                             "1:\n" \
+                             : : : "memory"); \
+} while (0)
+
+#define mb()    \
+        membar_safe("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad")
+#define rmb()   \
+        membar_safe("#LoadLoad")
+#define wmb()   \
+        membar_safe("#StoreStore")
+#define membar_storeload() \
+        membar_safe("#StoreLoad")
+#define membar_storeload_storestore() \
+        membar_safe("#StoreLoad | #StoreStore")
+#define membar_storeload_loadload() \
+        membar_safe("#StoreLoad | #LoadLoad")
+#define membar_storestore_loadstore() \
+        membar_safe("#StoreStore | #LoadStore")
+
+#endif
+
+#define nop()           __asm__ __volatile__ ("nop")
+
+#define read_barrier_depends()          do { } while(0)
+#define set_mb(__var, __value) \
+        do { __var = __value; membar_storeload_storestore(); } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()        mb()
+#define smp_rmb()       rmb()
+#define smp_wmb()       wmb()
+#define smp_read_barrier_depends()      read_barrier_depends()
+#else
+#define smp_mb()        __asm__ __volatile__("":::"memory")
+#define smp_rmb()       __asm__ __volatile__("":::"memory")
+#define smp_wmb()       __asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()      do { } while(0)
+#endif
+
+#define flushi(addr)    __asm__ __volatile__ ("flush %0" : : "r" (addr) : "memory")
+
+#define flushw_all()    __asm__ __volatile__("flushw")
+
+/* Performance counter register access. */
+#define read_pcr(__p)  __asm__ __volatile__("rd %%pcr, %0" : "=r" (__p))
+#define write_pcr(__p) __asm__ __volatile__("wr %0, 0x0, %%pcr" : : "r" (__p))
+#define read_pic(__p)  __asm__ __volatile__("rd %%pic, %0" : "=r" (__p))
+
+/* Blackbird errata workaround.  See commentary in
+ * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt()
+ * for more information.
+ */
+#define reset_pic()                                             \
+        __asm__ __volatile__("ba,pt     %xcc, 99f\n\t"          \
+                             ".align    64\n"                   \
+                          "99:wr        %g0, 0x0, %pic\n\t"     \
+                             "rd        %pic, %g0")
+
+#ifndef __ASSEMBLY__
+
+extern void sun_do_break(void);
+extern int stop_a_enabled;
+
+extern void fault_in_user_windows(void);
+extern void synchronize_user_stack(void);
+
+extern void __flushw_user(void);
+#define flushw_user() __flushw_user()
+
+#define flush_user_windows flushw_user
+#define flush_register_windows flushw_all
+
+/* Don't hold the runqueue lock over context switch */
+#define __ARCH_WANT_UNLOCKED_CTXSW
+#define prepare_arch_switch(next)               \
+do {                                            \
+        flushw_all();                           \
+} while (0)
+
+        /* See what happens when you design the chip correctly?
+         *
+         * We tell gcc we clobber all non-fixed-usage registers except
+         * for l0/l1.  It will use one for 'next' and the other to hold
+         * the output value of 'last'.  'next' is not referenced again
+         * past the invocation of switch_to in the scheduler, so we need
+         * not preserve it's value.  Hairy, but it lets us remove 2 loads
+         * and 2 stores in this critical code path.  -DaveM
+         */
+#define switch_to(prev, next, last)                                     \
+do {    if (test_thread_flag(TIF_PERFCTR)) {                            \
+                unsigned long __tmp;                                    \
+                read_pcr(__tmp);                                        \
+                current_thread_info()->pcr_reg = __tmp;                 \
+                read_pic(__tmp);                                        \
+                current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\
+                current_thread_info()->kernel_cntd1 += ((__tmp) >> 32); \
+        }                                                               \
+        flush_tlb_pending();                                            \
+        save_and_clear_fpu();                                           \
+        /* If you are tempted to conditionalize the following */        \
+        /* so that ASI is only written if it changes, think again. */   \
+        __asm__ __volatile__("wr %%g0, %0, %%asi"                       \
+        : : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\
+        trap_block[current_thread_info()->cpu].thread =                 \
+                task_thread_info(next);                                 \
+        __asm__ __volatile__(                                           \
+        "mov    %%g4, %%g7\n\t"                                         \
+        "stx    %%i6, [%%sp + 2047 + 0x70]\n\t"                         \
+        "stx    %%i7, [%%sp + 2047 + 0x78]\n\t"                         \
+        "rdpr   %%wstate, %%o5\n\t"                                     \
+        "stx    %%o6, [%%g6 + %6]\n\t"                                  \
+        "stb    %%o5, [%%g6 + %5]\n\t"                                  \
+        "rdpr   %%cwp, %%o5\n\t"                                        \
+        "stb    %%o5, [%%g6 + %8]\n\t"                                  \
+        "mov    %4, %%g6\n\t"                                           \
+        "ldub   [%4 + %8], %%g1\n\t"                                    \
+        "wrpr   %%g1, %%cwp\n\t"                                        \
+        "ldx    [%%g6 + %6], %%o6\n\t"                                  \
+        "ldub   [%%g6 + %5], %%o5\n\t"                                  \
+        "ldub   [%%g6 + %7], %%o7\n\t"                                  \
+        "wrpr   %%o5, 0x0, %%wstate\n\t"                                \
+        "ldx    [%%sp + 2047 + 0x70], %%i6\n\t"                         \
+        "ldx    [%%sp + 2047 + 0x78], %%i7\n\t"                         \
+        "ldx    [%%g6 + %9], %%g4\n\t"                                  \
+        "brz,pt %%o7, switch_to_pc\n\t"                                 \
+        " mov   %%g7, %0\n\t"                                           \
+        "sethi  %%hi(ret_from_syscall), %%g1\n\t"                       \
+        "jmpl   %%g1 + %%lo(ret_from_syscall), %%g0\n\t"                \
+        " nop\n\t"                                                      \
+        ".globl switch_to_pc\n\t"                                       \
+        "switch_to_pc:\n\t"                                             \
+        : "=&r" (last), "=r" (current), "=r" (current_thread_info_reg), \
+          "=r" (__local_per_cpu_offset)                                 \
+        : "0" (task_thread_info(next)),                                 \
+          "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_NEW_CHILD),            \
+          "i" (TI_CWP), "i" (TI_TASK)                                   \
+        : "cc",                                                         \
+                "g1", "g2", "g3",                   "g7",               \
+                "l1", "l2", "l3", "l4", "l5", "l6", "l7",               \
+          "i0", "i1", "i2", "i3", "i4", "i5",                           \
+          "o0", "o1", "o2", "o3", "o4", "o5",       "o7");              \
+        /* If you fuck with this, update ret_from_syscall code too. */  \
+        if (test_thread_flag(TIF_PERFCTR)) {                            \
+                write_pcr(current_thread_info()->pcr_reg);              \
+                reset_pic();                                            \
+        }                                                               \
+} while(0)
+
+static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
+{
+        unsigned long tmp1, tmp2;
+
+        __asm__ __volatile__(
+"       membar          #StoreLoad | #LoadLoad\n"
+"       mov             %0, %1\n"
+"1:     lduw            [%4], %2\n"
+"       cas             [%4], %2, %0\n"
+"       cmp             %2, %0\n"
+"       bne,a,pn        %%icc, 1b\n"
+"        mov            %1, %0\n"
+"       membar          #StoreLoad | #StoreStore\n"
+        : "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
+        : "0" (val), "r" (m)
+        : "cc", "memory");
+        return val;
+}
+
+static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val)
+{
+        unsigned long tmp1, tmp2;
+
+        __asm__ __volatile__(
+"       membar          #StoreLoad | #LoadLoad\n"
+"       mov             %0, %1\n"
+"1:     ldx             [%4], %2\n"
+"       casx            [%4], %2, %0\n"
+"       cmp             %2, %0\n"
+"       bne,a,pn        %%xcc, 1b\n"
+"        mov            %1, %0\n"
+"       membar          #StoreLoad | #StoreStore\n"
+        : "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
+        : "0" (val), "r" (m)
+        : "cc", "memory");
+        return val;
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
+                                       int size)
+{
+        switch (size) {
+        case 4:
+                return xchg32(ptr, x);
+        case 8:
+                return xchg64(ptr, x);
+        };
+        __xchg_called_with_bad_pointer();
+        return x;
+}
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long
+__cmpxchg_u32(volatile int *m, int old, int new)
+{
+        __asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+                             "cas [%2], %3, %0\n\t"
+                             "membar #StoreLoad | #StoreStore"
+                             : "=&r" (new)
+                             : "0" (new), "r" (m), "r" (old)
+                             : "memory");
+
+        return new;
+}
+
+static inline unsigned long
+__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+        __asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+                             "casx [%2], %3, %0\n\t"
+                             "membar #StoreLoad | #StoreStore"
+                             : "=&r" (new)
+                             : "0" (new), "r" (m), "r" (old)
+                             : "memory");
+
+        return new;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+        switch (size) {
+                case 4:
+                        return __cmpxchg_u32(ptr, old, new);
+                case 8:
+                        return __cmpxchg_u64(ptr, old, new);
+        }
+        __cmpxchg_called_with_bad_pointer();
+        return old;
+}
+
+#define cmpxchg(ptr,o,n)                                                 \
+  ({                                                                     \
+     __typeof__(*(ptr)) _o_ = (o);                                       \
+     __typeof__(*(ptr)) _n_ = (n);                                       \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,           \
+                                    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+                                      unsigned long old,
+                                      unsigned long new, int size)
+{
+        switch (size) {
+        case 4:
+        case 8: return __cmpxchg(ptr, old, new, size);
+        default:
+                return __cmpxchg_local_generic(ptr, old, new, size);
+        }
+
+        return old;
+}
+
+#define cmpxchg_local(ptr, o, n)                                        \
+        ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
+                        (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n)                                      \
+  ({                                                                    \
+        BUILD_BUG_ON(sizeof(*(ptr)) != 8);                              \
+        cmpxchg_local((ptr), (o), (n));                                 \
+  })
+
+#endif /* !(__ASSEMBLY__) */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC64_SYSTEM_H) */
diff --git a/arch/sparc/include/asm/termbits.h b/arch/sparc/include/asm/termbits.h
new file mode 100644
index 000000000000..d6ca3e2754f5
--- /dev/null
+++ b/arch/sparc/include/asm/termbits.h
@@ -0,0 +1,266 @@
+#ifndef _SPARC_TERMBITS_H
+#define _SPARC_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+
+#if defined(__sparc__) && defined(__arch64__)
+typedef unsigned int    tcflag_t;
+#else
+typedef unsigned long   tcflag_t;
+#endif
+
+#define NCC 8
+struct termio {
+        unsigned short c_iflag;         /* input mode flags */
+        unsigned short c_oflag;         /* output mode flags */
+        unsigned short c_cflag;         /* control mode flags */
+        unsigned short c_lflag;         /* local mode flags */
+        unsigned char c_line;           /* line discipline */
+        unsigned char c_cc[NCC];        /* control characters */
+};
+
+#define NCCS 17
+struct termios {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+#ifdef __KERNEL__
+#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t))
+        cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
+#endif
+};
+
+struct termios2 {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+        cc_t _x_cc[2];                  /* padding to match ktermios */
+        speed_t c_ispeed;               /* input speed */
+        speed_t c_ospeed;               /* output speed */
+};
+
+struct ktermios {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+        cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
+        speed_t c_ispeed;               /* input speed */
+        speed_t c_ospeed;               /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR    0
+#define VQUIT    1
+#define VERASE   2
+#define VKILL    3
+#define VEOF     4
+#define VEOL     5
+#define VEOL2    6
+#define VSWTC    7
+#define VSTART   8
+#define VSTOP    9
+
+
+
+#define VSUSP    10
+#define VDSUSP   11  /* SunOS POSIX nicety I do believe... */
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE  14
+#define VLNEXT   15
+
+/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is
+ * shared with eof/eol
+ */
+#ifdef __KERNEL__
+#define VMIN     16
+#define VTIME    17
+#else
+#define VMIN     VEOF
+#define VTIME    VEOL
+#endif
+
+/* c_iflag bits */
+#define IGNBRK  0x00000001
+#define BRKINT  0x00000002
+#define IGNPAR  0x00000004
+#define PARMRK  0x00000008
+#define INPCK   0x00000010
+#define ISTRIP  0x00000020
+#define INLCR   0x00000040
+#define IGNCR   0x00000080
+#define ICRNL   0x00000100
+#define IUCLC   0x00000200
+#define IXON    0x00000400
+#define IXANY   0x00000800
+#define IXOFF   0x00001000
+#define IMAXBEL 0x00002000
+#define IUTF8   0x00004000
+
+/* c_oflag bits */
+#define OPOST   0x00000001
+#define OLCUC   0x00000002
+#define ONLCR   0x00000004
+#define OCRNL   0x00000008
+#define ONOCR   0x00000010
+#define ONLRET  0x00000020
+#define OFILL   0x00000040
+#define OFDEL   0x00000080
+#define NLDLY   0x00000100
+#define   NL0   0x00000000
+#define   NL1   0x00000100
+#define CRDLY   0x00000600
+#define   CR0   0x00000000
+#define   CR1   0x00000200
+#define   CR2   0x00000400
+#define   CR3   0x00000600
+#define TABDLY  0x00001800
+#define   TAB0  0x00000000
+#define   TAB1  0x00000800
+#define   TAB2  0x00001000
+#define   TAB3  0x00001800
+#define   XTABS 0x00001800
+#define BSDLY   0x00002000
+#define   BS0   0x00000000
+#define   BS1   0x00002000
+#define VTDLY   0x00004000
+#define   VT0   0x00000000
+#define   VT1   0x00004000
+#define FFDLY   0x00008000
+#define   FF0   0x00000000
+#define   FF1   0x00008000
+#define PAGEOUT 0x00010000  /* SUNOS specific */
+#define WRAP    0x00020000  /* SUNOS specific */
+
+/* c_cflag bit meaning */
+#define CBAUD     0x0000100f
+#define  B0       0x00000000   /* hang up */
+#define  B50      0x00000001
+#define  B75      0x00000002
+#define  B110     0x00000003
+#define  B134     0x00000004
+#define  B150     0x00000005
+#define  B200     0x00000006
+#define  B300     0x00000007
+#define  B600     0x00000008
+#define  B1200    0x00000009
+#define  B1800    0x0000000a
+#define  B2400    0x0000000b
+#define  B4800    0x0000000c
+#define  B9600    0x0000000d
+#define  B19200   0x0000000e
+#define  B38400   0x0000000f
+#define EXTA      B19200
+#define EXTB      B38400
+#define  CSIZE    0x00000030
+#define   CS5     0x00000000
+#define   CS6     0x00000010
+#define   CS7     0x00000020
+#define   CS8     0x00000030
+#define CSTOPB    0x00000040
+#define CREAD     0x00000080
+#define PARENB    0x00000100
+#define PARODD    0x00000200
+#define HUPCL     0x00000400
+#define CLOCAL    0x00000800
+#define CBAUDEX   0x00001000
+/* We'll never see these speeds with the Zilogs, but for completeness... */
+#define  BOTHER   0x00001000
+#define  B57600   0x00001001
+#define  B115200  0x00001002
+#define  B230400  0x00001003
+#define  B460800  0x00001004
+/* This is what we can do with the Zilogs. */
+#define  B76800   0x00001005
+/* This is what we can do with the SAB82532. */
+#define  B153600  0x00001006
+#define  B307200  0x00001007
+#define  B614400  0x00001008
+#define  B921600  0x00001009
+/* And these are the rest... */
+#define  B500000  0x0000100a
+#define  B576000  0x0000100b
+#define B1000000  0x0000100c
+#define B1152000  0x0000100d
+#define B1500000  0x0000100e
+#define B2000000  0x0000100f
+/* These have totally bogus values and nobody uses them
+   so far. Later on we'd have to use say 0x10000x and
+   adjust CBAUD constant and drivers accordingly.
+#define B2500000  0x00001010
+#define B3000000  0x00001011
+#define B3500000  0x00001012
+#define B4000000  0x00001013  */
+#define CIBAUD    0x100f0000  /* input baud rate (not used) */
+#define CMSPAR    0x40000000  /* mark or space (stick) parity */
+#define CRTSCTS   0x80000000  /* flow control */
+
+#define IBSHIFT   16            /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG    0x00000001
+#define ICANON  0x00000002
+#define XCASE   0x00000004
+#define ECHO    0x00000008
+#define ECHOE   0x00000010
+#define ECHOK   0x00000020
+#define ECHONL  0x00000040
+#define NOFLSH  0x00000080
+#define TOSTOP  0x00000100
+#define ECHOCTL 0x00000200
+#define ECHOPRT 0x00000400
+#define ECHOKE  0x00000800
+#define DEFECHO 0x00001000  /* SUNOS thing, what is it? */
+#define FLUSHO  0x00002000
+#define PENDIN  0x00004000
+#define IEXTEN  0x00008000
+
+/* modem lines */
+#define TIOCM_LE        0x001
+#define TIOCM_DTR       0x002
+#define TIOCM_RTS       0x004
+#define TIOCM_ST        0x008
+#define TIOCM_SR        0x010
+#define TIOCM_CTS       0x020
+#define TIOCM_CAR       0x040
+#define TIOCM_RNG       0x080
+#define TIOCM_DSR       0x100
+#define TIOCM_CD        TIOCM_CAR
+#define TIOCM_RI        TIOCM_RNG
+#define TIOCM_OUT1      0x2000
+#define TIOCM_OUT2      0x4000
+#define TIOCM_LOOP      0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01    /* Transmitter physically empty */
+
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF          0
+#define TCOON           1
+#define TCIOFF          2
+#define TCION           3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH        0
+#define TCOFLUSH        1
+#define TCIOFLUSH       2
+
+/* tcsetattr uses these */
+#define TCSANOW         0
+#define TCSADRAIN       1
+#define TCSAFLUSH       2
+
+#endif /* !(_SPARC_TERMBITS_H) */
diff --git a/arch/sparc/include/asm/termios.h b/arch/sparc/include/asm/termios.h
new file mode 100644
index 000000000000..e8ba95399643
--- /dev/null
+++ b/arch/sparc/include/asm/termios.h
@@ -0,0 +1,186 @@
+#ifndef _SPARC_TERMIOS_H
+#define _SPARC_TERMIOS_H
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS)
+struct sgttyb {
+        char    sg_ispeed;
+        char    sg_ospeed;
+        char    sg_erase;
+        char    sg_kill;
+        short   sg_flags;
+};
+
+struct tchars {
+        char    t_intrc;
+        char    t_quitc;
+        char    t_startc;
+        char    t_stopc;
+        char    t_eofc;
+        char    t_brkc;
+};
+
+struct ltchars {
+        char    t_suspc;
+        char    t_dsuspc;
+        char    t_rprntc;
+        char    t_flushc;
+        char    t_werasc;
+        char    t_lnextc;
+};
+#endif /* __KERNEL__ */
+
+struct winsize {
+        unsigned short ws_row;
+        unsigned short ws_col;
+        unsigned short ws_xpixel;
+        unsigned short ws_ypixel;
+};
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ * c_cc characters in the termio structure.  Oh, how I love being
+ * backwardly compatible.  Notice that character 4 and 5 are
+ * interpreted differently depending on whether ICANON is set in
+ * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
+ * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
+ * is compatible with sysV)...
+ */
+#define _VMIN   4
+#define _VTIME  5
+
+/*      intr=^C         quit=^\         erase=del       kill=^U
+        eof=^D          eol=\0          eol2=\0         sxtc=\0
+        start=^Q        stop=^S         susp=^Z         dsusp=^Y
+        reprint=^R      discard=^U      werase=^W       lnext=^V
+        vmin=\1         vtime=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+        unsigned short tmp; \
+        int err; \
+        err = get_user(tmp, &(termio)->c_iflag); \
+        (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+        err |= get_user(tmp, &(termio)->c_oflag); \
+        (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+        err |= get_user(tmp, &(termio)->c_cflag); \
+        (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+        err |= get_user(tmp, &(termio)->c_lflag); \
+        (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+        err |= copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+        err; \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ *
+ * Note the "fun" _VMIN overloading.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+        int err; \
+        err  = put_user((termios)->c_iflag, &(termio)->c_iflag); \
+        err |= put_user((termios)->c_oflag, &(termio)->c_oflag); \
+        err |= put_user((termios)->c_cflag, &(termio)->c_cflag); \
+        err |= put_user((termios)->c_lflag, &(termio)->c_lflag); \
+        err |= put_user((termios)->c_line,  &(termio)->c_line); \
+        err |= copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+        if (!((termios)->c_lflag & ICANON)) { \
+                err |= put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \
+                err |= put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \
+        } \
+        err; \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+({ \
+        int err; \
+        err  = get_user((k)->c_iflag, &(u)->c_iflag); \
+        err |= get_user((k)->c_oflag, &(u)->c_oflag); \
+        err |= get_user((k)->c_cflag, &(u)->c_cflag); \
+        err |= get_user((k)->c_lflag, &(u)->c_lflag); \
+        err |= get_user((k)->c_line,  &(u)->c_line); \
+        err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+        if ((k)->c_lflag & ICANON) { \
+                err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+                err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+        } else { \
+                err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+                err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+        } \
+        err |= get_user((k)->c_ispeed,  &(u)->c_ispeed); \
+        err |= get_user((k)->c_ospeed,  &(u)->c_ospeed); \
+        err; \
+})
+
+#define kernel_termios_to_user_termios(u, k) \
+({ \
+        int err; \
+        err  = put_user((k)->c_iflag, &(u)->c_iflag); \
+        err |= put_user((k)->c_oflag, &(u)->c_oflag); \
+        err |= put_user((k)->c_cflag, &(u)->c_cflag); \
+        err |= put_user((k)->c_lflag, &(u)->c_lflag); \
+        err |= put_user((k)->c_line, &(u)->c_line); \
+        err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+        if (!((k)->c_lflag & ICANON)) { \
+                err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+                err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+        } else { \
+                err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+                err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+        } \
+        err |= put_user((k)->c_ispeed, &(u)->c_ispeed); \
+        err |= put_user((k)->c_ospeed, &(u)->c_ospeed); \
+        err; \
+})
+
+#define user_termios_to_kernel_termios_1(k, u) \
+({ \
+        int err; \
+        err  = get_user((k)->c_iflag, &(u)->c_iflag); \
+        err |= get_user((k)->c_oflag, &(u)->c_oflag); \
+        err |= get_user((k)->c_cflag, &(u)->c_cflag); \
+        err |= get_user((k)->c_lflag, &(u)->c_lflag); \
+        err |= get_user((k)->c_line,  &(u)->c_line); \
+        err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+        if ((k)->c_lflag & ICANON) { \
+                err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+                err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+        } else { \
+                err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+                err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+        } \
+        err; \
+})
+
+#define kernel_termios_to_user_termios_1(u, k) \
+({ \
+        int err; \
+        err  = put_user((k)->c_iflag, &(u)->c_iflag); \
+        err |= put_user((k)->c_oflag, &(u)->c_oflag); \
+        err |= put_user((k)->c_cflag, &(u)->c_cflag); \
+        err |= put_user((k)->c_lflag, &(u)->c_lflag); \
+        err |= put_user((k)->c_line, &(u)->c_line); \
+        err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+        if (!((k)->c_lflag & ICANON)) { \
+                err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+                err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+        } else { \
+                err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+                err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+        } \
+        err; \
+})
+
+#endif  /* __KERNEL__ */
+
+#endif /* _SPARC_TERMIOS_H */
diff --git a/arch/sparc/include/asm/thread_info.h b/arch/sparc/include/asm/thread_info.h
new file mode 100644
index 000000000000..122d7acc07e6
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_THREAD_INFO_H
+#define ___ASM_SPARC_THREAD_INFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/thread_info_64.h>
+#else
+#include <asm/thread_info_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
new file mode 100644
index 000000000000..cbb892d0dff0
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -0,0 +1,158 @@
+/*
+ * thread_info.h: sparc low-level thread information
+ * adapted from the ppc version by Pete Zaitcev, which was
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * Copyright (c) 2002  Pete Zaitcev (zaitcev@yahoo.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/btfixup.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Low level task data.
+ *
+ * If you change this, change the TI_* offsets below to match.
+ */
+#define NSWINS 8
+struct thread_info {
+        unsigned long           uwinmask;
+        struct task_struct      *task;          /* main task structure */
+        struct exec_domain      *exec_domain;   /* execution domain */
+        unsigned long           flags;          /* low level flags */
+        int                     cpu;            /* cpu we're on */
+        int                     preempt_count;  /* 0 => preemptable,
+                                                   <0 => BUG */
+        int                     softirq_count;
+        int                     hardirq_count;
+
+        /* Context switch saved kernel state. */
+        unsigned long ksp;      /* ... ksp __attribute__ ((aligned (8))); */
+        unsigned long kpc;
+        unsigned long kpsr;
+        unsigned long kwim;
+
+        /* A place to store user windows and stack pointers
+         * when the stack needs inspection.
+         */
+        struct reg_window       reg_window[NSWINS];     /* align for ldd! */
+        unsigned long           rwbuf_stkptrs[NSWINS];
+        unsigned long           w_saved;
+
+        struct restart_block    restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)                           \
+{                                                       \
+        .uwinmask       =       0,                      \
+        .task           =       &tsk,                   \
+        .exec_domain    =       &default_exec_domain,   \
+        .flags          =       0,                      \
+        .cpu            =       0,                      \
+        .preempt_count  =       1,                      \
+        .restart_block  = {                             \
+                .fn     =       do_no_restart_syscall,  \
+        },                                              \
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()   (current_thread_info_reg)
+
+/*
+ * thread information allocation
+ */
+#if PAGE_SHIFT == 13
+#define THREAD_INFO_ORDER  0
+#else /* PAGE_SHIFT */
+#define THREAD_INFO_ORDER  1
+#endif
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
+#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
+
+BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
+#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Size of kernel stack for each process.
+ * Observe the order of get_free_pages() in alloc_thread_info().
+ * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste.
+ */
+#define THREAD_SIZE             8192
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications.
+ */
+#define TI_UWINMASK     0x00    /* uwinmask */
+#define TI_TASK         0x04
+#define TI_EXECDOMAIN   0x08    /* exec_domain */
+#define TI_FLAGS        0x0c
+#define TI_CPU          0x10
+#define TI_PREEMPT      0x14    /* preempt_count */
+#define TI_SOFTIRQ      0x18    /* softirq_count */
+#define TI_HARDIRQ      0x1c    /* hardirq_count */
+#define TI_KSP          0x20    /* ksp */
+#define TI_KPC          0x24    /* kpc (ldd'ed with kpc) */
+#define TI_KPSR         0x28    /* kpsr */
+#define TI_KWIM         0x2c    /* kwim (ldd'ed with kpsr) */
+#define TI_REG_WINDOW   0x30
+#define TI_RWIN_SPTRS   0x230
+#define TI_W_SAVED      0x250
+/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */
+
+#define PREEMPT_ACTIVE          0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_NOTIFY_RESUME       1       /* callback before returning to user */
+#define TIF_SIGPENDING          2       /* signal pending */
+#define TIF_NEED_RESCHED        3       /* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK     4       /* restore signal mask in do_signal() */
+#define TIF_USEDFPU             8       /* FPU was used by this task
+                                         * this quantum (SMP) */
+#define TIF_POLLING_NRFLAG      9       /* true if poll_idle() is polling
+                                         * TIF_NEED_RESCHED */
+#define TIF_MEMDIE              10
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME      (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK    (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_USEDFPU            (1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_DO_NOTIFY_RESUME_MASK      (_TIF_NOTIFY_RESUME | \
+                                         _TIF_SIGPENDING | \
+                                         _TIF_RESTORE_SIGMASK)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
new file mode 100644
index 000000000000..c0a737d7292c
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -0,0 +1,281 @@
+/* thread_info.h: sparc64 low-level thread information
+ *
+ * Copyright (C) 2002  David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#define NSWINS          7
+
+#define TI_FLAG_BYTE_FAULT_CODE         0
+#define TI_FLAG_FAULT_CODE_SHIFT        56
+#define TI_FLAG_BYTE_WSTATE             1
+#define TI_FLAG_WSTATE_SHIFT            48
+#define TI_FLAG_BYTE_CWP                2
+#define TI_FLAG_CWP_SHIFT               40
+#define TI_FLAG_BYTE_CURRENT_DS         3
+#define TI_FLAG_CURRENT_DS_SHIFT        32
+#define TI_FLAG_BYTE_FPDEPTH            4
+#define TI_FLAG_FPDEPTH_SHIFT           24
+#define TI_FLAG_BYTE_WSAVED             5
+#define TI_FLAG_WSAVED_SHIFT            16
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+struct task_struct;
+struct exec_domain;
+
+struct thread_info {
+        /* D$ line 1 */
+        struct task_struct      *task;
+        unsigned long           flags;
+        __u8                    fpsaved[7];
+        __u8                    status;
+        unsigned long           ksp;
+
+        /* D$ line 2 */
+        unsigned long           fault_address;
+        struct pt_regs          *kregs;
+        struct exec_domain      *exec_domain;
+        int                     preempt_count;  /* 0 => preemptable, <0 => BUG */
+        __u8                    new_child;
+        __u8                    syscall_noerror;
+        __u16                   cpu;
+
+        unsigned long           *utraps;
+
+        struct reg_window       reg_window[NSWINS];
+        unsigned long           rwbuf_stkptrs[NSWINS];
+
+        unsigned long           gsr[7];
+        unsigned long           xfsr[7];
+
+        __u64                   __user *user_cntd0;
+        __u64                   __user *user_cntd1;
+        __u64                   kernel_cntd0, kernel_cntd1;
+        __u64                   pcr_reg;
+
+        struct restart_block    restart_block;
+
+        struct pt_regs          *kern_una_regs;
+        unsigned int            kern_una_insn;
+
+        unsigned long           fpregs[0] __attribute__ ((aligned(64)));
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+/* offsets into the thread_info struct for assembly code access */
+#define TI_TASK         0x00000000
+#define TI_FLAGS        0x00000008
+#define TI_FAULT_CODE   (TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE)
+#define TI_WSTATE       (TI_FLAGS + TI_FLAG_BYTE_WSTATE)
+#define TI_CWP          (TI_FLAGS + TI_FLAG_BYTE_CWP)
+#define TI_CURRENT_DS   (TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
+#define TI_FPDEPTH      (TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
+#define TI_WSAVED       (TI_FLAGS + TI_FLAG_BYTE_WSAVED)
+#define TI_FPSAVED      0x00000010
+#define TI_KSP          0x00000018
+#define TI_FAULT_ADDR   0x00000020
+#define TI_KREGS        0x00000028
+#define TI_EXEC_DOMAIN  0x00000030
+#define TI_PRE_COUNT    0x00000038
+#define TI_NEW_CHILD    0x0000003c
+#define TI_SYS_NOERROR  0x0000003d
+#define TI_CPU          0x0000003e
+#define TI_UTRAPS       0x00000040
+#define TI_REG_WINDOW   0x00000048
+#define TI_RWIN_SPTRS   0x000003c8
+#define TI_GSR          0x00000400
+#define TI_XFSR         0x00000438
+#define TI_USER_CNTD0   0x00000470
+#define TI_USER_CNTD1   0x00000478
+#define TI_KERN_CNTD0   0x00000480
+#define TI_KERN_CNTD1   0x00000488
+#define TI_PCR          0x00000490
+#define TI_RESTART_BLOCK 0x00000498
+#define TI_KUNA_REGS    0x000004c0
+#define TI_KUNA_INSN    0x000004c8
+#define TI_FPREGS       0x00000500
+
+/* We embed this in the uppermost byte of thread_info->flags */
+#define FAULT_CODE_WRITE        0x01    /* Write access, implies D-TLB     */
+#define FAULT_CODE_DTLB         0x02    /* Miss happened in D-TLB          */
+#define FAULT_CODE_ITLB         0x04    /* Miss happened in I-TLB          */
+#define FAULT_CODE_WINFIXUP     0x08    /* Miss happened during spill/fill */
+#define FAULT_CODE_BLKCOMMIT    0x10    /* Use blk-commit ASI in copy_page */
+
+#if PAGE_SHIFT == 13
+#define THREAD_SIZE (2*PAGE_SIZE)
+#define THREAD_SHIFT (PAGE_SHIFT + 1)
+#else /* PAGE_SHIFT == 13 */
+#define THREAD_SIZE PAGE_SIZE
+#define THREAD_SHIFT PAGE_SHIFT
+#endif /* PAGE_SHIFT == 13 */
+
+#define PREEMPT_ACTIVE          0x4000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)                           \
+{                                                       \
+        .task           =       &tsk,                   \
+        .flags          = ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,   \
+        .exec_domain    =       &default_exec_domain,   \
+        .preempt_count  =       1,                      \
+        .restart_block  = {                             \
+                .fn     =       do_no_restart_syscall,  \
+        },                                              \
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()   (current_thread_info_reg)
+
+/* thread information allocation */
+#if PAGE_SHIFT == 13
+#define __THREAD_INFO_ORDER     1
+#else /* PAGE_SHIFT == 13 */
+#define __THREAD_INFO_ORDER     0
+#endif /* PAGE_SHIFT == 13 */
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)                                  \
+({                                                              \
+        struct thread_info *ret;                                \
+                                                                \
+        ret = (struct thread_info *)                            \
+          __get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER);    \
+        if (ret)                                                \
+                memset(ret, 0, PAGE_SIZE<<__THREAD_INFO_ORDER); \
+        ret;                                                    \
+})
+#else
+#define alloc_thread_info(tsk) \
+        ((struct thread_info *)__get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER))
+#endif
+
+#define free_thread_info(ti) \
+        free_pages((unsigned long)(ti),__THREAD_INFO_ORDER)
+
+#define __thread_flag_byte_ptr(ti)      \
+        ((unsigned char *)(&((ti)->flags)))
+#define __cur_thread_flag_byte_ptr      __thread_flag_byte_ptr(current_thread_info())
+
+#define get_thread_fault_code()         (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE])
+#define set_thread_fault_code(val)      (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE] = (val))
+#define get_thread_wstate()             (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE])
+#define set_thread_wstate(val)          (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE] = (val))
+#define get_thread_cwp()                (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP])
+#define set_thread_cwp(val)             (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP] = (val))
+#define get_thread_current_ds()         (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS])
+#define set_thread_current_ds(val)      (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS] = (val))
+#define get_thread_fpdepth()            (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH])
+#define set_thread_fpdepth(val)         (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH] = (val))
+#define get_thread_wsaved()             (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED])
+#define set_thread_wsaved(val)          (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED] = (val))
+
+#endif /* !(__ASSEMBLY__) */
+
+/*
+ * Thread information flags, only 16 bits are available as we encode
+ * other values into the upper 6 bytes.
+ *
+ * On trap return we need to test several values:
+ *
+ * user:        need_resched, notify_resume, sigpending, wsaved, perfctr
+ * kernel:      fpdepth
+ *
+ * So to check for work in the kernel case we simply load the fpdepth
+ * byte out of the flags and test it.  For the user case we encode the
+ * lower 3 bytes of flags as follows:
+ *      ----------------------------------------
+ *      | wsaved | flags byte 1 | flags byte 2 |
+ *      ----------------------------------------
+ * This optimizes the user test into:
+ *      ldx             [%g6 + TI_FLAGS], REG1
+ *      sethi           %hi(_TIF_USER_WORK_MASK), REG2
+ *      or              REG2, %lo(_TIF_USER_WORK_MASK), REG2
+ *      andcc           REG1, REG2, %g0
+ *      be,pt           no_work_to_do
+ *       nop
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_NOTIFY_RESUME       1       /* callback before returning to user */
+#define TIF_SIGPENDING          2       /* signal pending */
+#define TIF_NEED_RESCHED        3       /* rescheduling necessary */
+#define TIF_PERFCTR             4       /* performance counters active */
+#define TIF_UNALIGNED           5       /* allowed to do unaligned accesses */
+/* flag bit 6 is available */
+#define TIF_32BIT               7       /* 32-bit binary */
+/* flag bit 8 is available */
+#define TIF_SECCOMP             9       /* secure computing */
+#define TIF_SYSCALL_AUDIT       10      /* syscall auditing active */
+/* flag bit 11 is available */
+/* NOTE: Thread flags >= 12 should be ones we have no interest
+ *       in using in assembly, else we can't use the mask as
+ *       an immediate value in instructions such as andcc.
+ */
+#define TIF_ABI_PENDING         12
+#define TIF_MEMDIE              13
+#define TIF_POLLING_NRFLAG      14
+
+#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME      (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
+#define _TIF_PERFCTR            (1<<TIF_PERFCTR)
+#define _TIF_UNALIGNED          (1<<TIF_UNALIGNED)
+#define _TIF_32BIT              (1<<TIF_32BIT)
+#define _TIF_SECCOMP            (1<<TIF_SECCOMP)
+#define _TIF_SYSCALL_AUDIT      (1<<TIF_SYSCALL_AUDIT)
+#define _TIF_ABI_PENDING        (1<<TIF_ABI_PENDING)
+#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_USER_WORK_MASK     ((0xff << TI_FLAG_WSAVED_SHIFT) | \
+                                 _TIF_DO_NOTIFY_RESUME_MASK | \
+                                 _TIF_NEED_RESCHED | _TIF_PERFCTR)
+#define _TIF_DO_NOTIFY_RESUME_MASK      (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING)
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ *
+ * Note that there are only 8 bits available.
+ */
+#define TS_RESTORE_SIGMASK      0x0001  /* restore signal mask in do_signal() */
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK        1
+static inline void set_restore_sigmask(void)
+{
+        struct thread_info *ti = current_thread_info();
+        ti->status |= TS_RESTORE_SIGMASK;
+        set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif  /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/sparc/include/asm/timer.h b/arch/sparc/include/asm/timer.h
new file mode 100644
index 000000000000..612fd2779d9e
--- /dev/null
+++ b/arch/sparc/include/asm/timer.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMER_H
+#define ___ASM_SPARC_TIMER_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timer_64.h>
+#else
+#include <asm/timer_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/timer_32.h b/arch/sparc/include/asm/timer_32.h
new file mode 100644
index 000000000000..361e53898dd7
--- /dev/null
+++ b/arch/sparc/include/asm/timer_32.h
@@ -0,0 +1,107 @@
+/*
+ * timer.h:  Definitions for the timer chips on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+
+#ifndef _SPARC_TIMER_H
+#define _SPARC_TIMER_H
+
+#include <asm/system.h>  /* For SUN4M_NCPUS */
+#include <asm/sun4paddr.h>
+#include <asm/btfixup.h>
+
+/* Timer structures. The interrupt timer has two properties which
+ * are the counter (which is handled in do_timer in sched.c) and the limit.
+ * This limit is where the timer's counter 'wraps' around. Oddly enough,
+ * the sun4c timer when it hits the limit wraps back to 1 and not zero
+ * thus when calculating the value at which it will fire a microsecond you
+ * must adjust by one.  Thanks SUN for designing such great hardware ;(
+ */
+
+/* Note that I am only going to use the timer that interrupts at
+ * Sparc IRQ 10.  There is another one available that can fire at
+ * IRQ 14. Currently it is left untouched, we keep the PROM's limit
+ * register value and let the prom take these interrupts.  This allows
+ * L1-A to work.
+ */
+
+struct sun4c_timer_info {
+  __volatile__ unsigned int cur_count10;
+  __volatile__ unsigned int timer_limit10;
+  __volatile__ unsigned int cur_count14;
+  __volatile__ unsigned int timer_limit14;
+};
+
+#define SUN4C_TIMER_PHYSADDR   0xf3000000
+#ifdef CONFIG_SUN4
+#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
+#else
+#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
+#endif
+
+/* A sun4m has two blocks of registers which are probably of the same
+ * structure. LSI Logic's L64851 is told to _decrement_ from the limit
+ * value. Aurora behaves similarly but its limit value is compacted in
+ * other fashion (it's wider). Documented fields are defined here.
+ */
+
+/* As with the interrupt register, we have two classes of timer registers
+ * which are per-cpu and master.  Per-cpu timers only hit that cpu and are
+ * only level 14 ticks, master timer hits all cpus and is level 10.
+ */
+
+#define SUN4M_PRM_CNT_L       0x80000000
+#define SUN4M_PRM_CNT_LVALUE  0x7FFFFC00
+
+struct sun4m_timer_percpu_info {
+  __volatile__ unsigned int l14_timer_limit;    /* Initial value is 0x009c4000 */
+  __volatile__ unsigned int l14_cur_count;
+
+  /* This register appears to be write only and/or inaccessible
+   * on Uni-Processor sun4m machines.
+   */
+  __volatile__ unsigned int l14_limit_noclear;  /* Data access error is here */
+
+  __volatile__ unsigned int cntrl;            /* =1 after POST on Aurora */
+  __volatile__ unsigned char space[PAGE_SIZE - 16];
+};
+
+struct sun4m_timer_regs {
+        struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
+        volatile unsigned int l10_timer_limit;
+        volatile unsigned int l10_cur_count;
+
+        /* Again, this appears to be write only and/or inaccessible
+         * on uni-processor sun4m machines.
+         */
+        volatile unsigned int l10_limit_noclear;
+
+        /* This register too, it must be magic. */
+        volatile unsigned int foobar;
+
+        volatile unsigned int cfg;     /* equals zero at boot time... */
+};
+
+#define SUN4D_PRM_CNT_L       0x80000000
+#define SUN4D_PRM_CNT_LVALUE  0x7FFFFC00
+
+struct sun4d_timer_regs {
+        volatile unsigned int l10_timer_limit;
+        volatile unsigned int l10_cur_countx;
+        volatile unsigned int l10_limit_noclear;
+        volatile unsigned int ctrl;
+        volatile unsigned int l10_cur_count;
+};
+
+extern struct sun4d_timer_regs *sun4d_timers;
+
+extern __volatile__ unsigned int *master_l10_counter;
+extern __volatile__ unsigned int *master_l10_limit;
+
+/* FIXME: Make do_[gs]ettimeofday btfixup calls */
+BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
+#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
+
+#endif /* !(_SPARC_TIMER_H) */
diff --git a/arch/sparc/include/asm/timer_64.h b/arch/sparc/include/asm/timer_64.h
new file mode 100644
index 000000000000..5b779fd1f788
--- /dev/null
+++ b/arch/sparc/include/asm/timer_64.h
@@ -0,0 +1,30 @@
+/* timer.h: System timer definitions for sun5.
+ *
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_TIMER_H
+#define _SPARC64_TIMER_H
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+struct sparc64_tick_ops {
+        unsigned long (*get_tick)(void);
+        int (*add_compare)(unsigned long);
+        unsigned long softint_mask;
+        void (*disable_irq)(void);
+
+        void (*init_tick)(void);
+        unsigned long (*add_tick)(unsigned long);
+
+        char *name;
+};
+
+extern struct sparc64_tick_ops *tick_ops;
+
+extern unsigned long sparc64_get_clock_tick(unsigned int cpu);
+extern void __devinit setup_sparc64_timer(void);
+extern void __init time_init(void);
+
+#endif /* _SPARC64_TIMER_H */
diff --git a/arch/sparc/include/asm/timex.h b/arch/sparc/include/asm/timex.h
new file mode 100644
index 000000000000..70cc37b73827
--- /dev/null
+++ b/arch/sparc/include/asm/timex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMEX_H
+#define ___ASM_SPARC_TIMEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timex_64.h>
+#else
+#include <asm/timex_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/timex_32.h b/arch/sparc/include/asm/timex_32.h
new file mode 100644
index 000000000000..b6ccdb0d6f7d
--- /dev/null
+++ b/arch/sparc/include/asm/timex_32.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm/timex.h
+ *
+ * sparc architecture timex specifications
+ */
+#ifndef _ASMsparc_TIMEX_H
+#define _ASMsparc_TIMEX_H
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+
+/* XXX Maybe do something better at some point... -DaveM */
+typedef unsigned long cycles_t;
+#define get_cycles()    (0)
+
+#endif
diff --git a/arch/sparc/include/asm/timex_64.h b/arch/sparc/include/asm/timex_64.h
new file mode 100644
index 000000000000..18b30bc9823b
--- /dev/null
+++ b/arch/sparc/include/asm/timex_64.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm/timex.h
+ *
+ * sparc64 architecture timex specifications
+ */
+#ifndef _ASMsparc64_TIMEX_H
+#define _ASMsparc64_TIMEX_H
+
+#include <asm/timer.h>
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+
+/* Getting on the cycle counter on sparc64. */
+typedef unsigned long cycles_t;
+#define get_cycles()    tick_ops->get_tick()
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif
diff --git a/arch/sparc/include/asm/tlb.h b/arch/sparc/include/asm/tlb.h
new file mode 100644
index 000000000000..92d0393bbcdc
--- /dev/null
+++ b/arch/sparc/include/asm/tlb.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLB_H
+#define ___ASM_SPARC_TLB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlb_64.h>
+#else
+#include <asm/tlb_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/tlb_32.h b/arch/sparc/include/asm/tlb_32.h
new file mode 100644
index 000000000000..6d02d1ce53f3
--- /dev/null
+++ b/arch/sparc/include/asm/tlb_32.h
@@ -0,0 +1,24 @@
+#ifndef _SPARC_TLB_H
+#define _SPARC_TLB_H
+
+#define tlb_start_vma(tlb, vma) \
+do {                                                            \
+        flush_cache_range(vma, vma->vm_start, vma->vm_end);     \
+} while (0)
+
+#define tlb_end_vma(tlb, vma) \
+do {                                                            \
+        flush_tlb_range(vma, vma->vm_start, vma->vm_end);       \
+} while (0)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) \
+        do { } while (0)
+
+#define tlb_flush(tlb) \
+do {                                                            \
+        flush_tlb_mm((tlb)->mm);                                \
+} while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _SPARC_TLB_H */
diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
new file mode 100644
index 000000000000..ec81cdedef2c
--- /dev/null
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -0,0 +1,111 @@
+#ifndef _SPARC64_TLB_H
+#define _SPARC64_TLB_H
+
+#include <linux/swap.h>
+#include <linux/pagemap.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+#define TLB_BATCH_NR    192
+
+/*
+ * For UP we don't need to worry about TLB flush
+ * and page free order so much..
+ */
+#ifdef CONFIG_SMP
+  #define FREE_PTE_NR   506
+  #define tlb_fast_mode(bp) ((bp)->pages_nr == ~0U)
+#else
+  #define FREE_PTE_NR   1
+  #define tlb_fast_mode(bp) 1
+#endif
+
+struct mmu_gather {
+        struct mm_struct *mm;
+        unsigned int pages_nr;
+        unsigned int need_flush;
+        unsigned int fullmm;
+        unsigned int tlb_nr;
+        unsigned long vaddrs[TLB_BATCH_NR];
+        struct page *pages[FREE_PTE_NR];
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+#ifdef CONFIG_SMP
+extern void smp_flush_tlb_pending(struct mm_struct *,
+                                  unsigned long, unsigned long *);
+#endif
+
+extern void __flush_tlb_pending(unsigned long, unsigned long, unsigned long *);
+extern void flush_tlb_pending(void);
+
+static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+        struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
+
+        BUG_ON(mp->tlb_nr);
+
+        mp->mm = mm;
+        mp->pages_nr = num_online_cpus() > 1 ? 0U : ~0U;
+        mp->fullmm = full_mm_flush;
+
+        return mp;
+}
+
+
+static inline void tlb_flush_mmu(struct mmu_gather *mp)
+{
+        if (mp->need_flush) {
+                free_pages_and_swap_cache(mp->pages, mp->pages_nr);
+                mp->pages_nr = 0;
+                mp->need_flush = 0;
+        }
+
+}
+
+#ifdef CONFIG_SMP
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+#define do_flush_tlb_mm(mm) smp_flush_tlb_mm(mm)
+#else
+#define do_flush_tlb_mm(mm) __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT)
+#endif
+
+static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, unsigned long end)
+{
+        tlb_flush_mmu(mp);
+
+        if (mp->fullmm)
+                mp->fullmm = 0;
+        else
+                flush_tlb_pending();
+
+        /* keep the page table cache within bounds */
+        check_pgt_cache();
+
+        put_cpu_var(mmu_gathers);
+}
+
+static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
+{
+        if (tlb_fast_mode(mp)) {
+                free_page_and_swap_cache(page);
+                return;
+        }
+        mp->need_flush = 1;
+        mp->pages[mp->pages_nr++] = page;
+        if (mp->pages_nr >= FREE_PTE_NR)
+                tlb_flush_mmu(mp);
+}
+
+#define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
+#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
+#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
+#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+
+#define tlb_migrate_finish(mm)  do { } while (0)
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma)   do { } while (0)
+
+#endif /* _SPARC64_TLB_H */
diff --git a/arch/sparc/include/asm/tlbflush.h b/arch/sparc/include/asm/tlbflush.h
new file mode 100644
index 000000000000..2c9629fad1e2
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLBFLUSH_H
+#define ___ASM_SPARC_TLBFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlbflush_64.h>
+#else
+#include <asm/tlbflush_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/tlbflush_32.h b/arch/sparc/include/asm/tlbflush_32.h
new file mode 100644
index 000000000000..fe0a71abc9bb
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush_32.h
@@ -0,0 +1,60 @@
+#ifndef _SPARC_TLBFLUSH_H
+#define _SPARC_TLBFLUSH_H
+
+#include <linux/mm.h>
+// #include <asm/processor.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs    XXX Exists?
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, local_flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_tlb_all() BTFIXUP_CALL(local_flush_tlb_all)()
+#define local_flush_tlb_mm(mm) BTFIXUP_CALL(local_flush_tlb_mm)(mm)
+#define local_flush_tlb_range(vma,start,end) BTFIXUP_CALL(local_flush_tlb_range)(vma,start,end)
+#define local_flush_tlb_page(vma,addr) BTFIXUP_CALL(local_flush_tlb_page)(vma,addr)
+
+extern void smp_flush_tlb_all(void);
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+extern void smp_flush_tlb_range(struct vm_area_struct *vma,
+                                  unsigned long start,
+                                  unsigned long end);
+extern void smp_flush_tlb_page(struct vm_area_struct *mm, unsigned long page);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+#define flush_tlb_all() BTFIXUP_CALL(flush_tlb_all)()
+#define flush_tlb_mm(mm) BTFIXUP_CALL(flush_tlb_mm)(mm)
+#define flush_tlb_range(vma,start,end) BTFIXUP_CALL(flush_tlb_range)(vma,start,end)
+#define flush_tlb_page(vma,addr) BTFIXUP_CALL(flush_tlb_page)(vma,addr)
+
+// #define flush_tlb() flush_tlb_mm(current->active_mm) /* XXX Sure? */
+
+/*
+ * This is a kludge, until I know better. --zaitcev XXX
+ */
+static inline void flush_tlb_kernel_range(unsigned long start,
+                                          unsigned long end)
+{
+        flush_tlb_all();
+}
+
+#endif /* _SPARC_TLBFLUSH_H */
diff --git a/arch/sparc/include/asm/tlbflush_64.h b/arch/sparc/include/asm/tlbflush_64.h
new file mode 100644
index 000000000000..fbb675dbe0c9
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush_64.h
@@ -0,0 +1,44 @@
+#ifndef _SPARC64_TLBFLUSH_H
+#define _SPARC64_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+
+/* TSB flush operations. */
+struct mmu_gather;
+extern void flush_tsb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tsb_user(struct mmu_gather *mp);
+
+/* TLB flush operations. */
+
+extern void flush_tlb_pending(void);
+
+#define flush_tlb_range(vma,start,end)  \
+        do { (void)(start); flush_tlb_pending(); } while (0)
+#define flush_tlb_page(vma,addr)        flush_tlb_pending()
+#define flush_tlb_mm(mm)                flush_tlb_pending()
+
+/* Local cpu only.  */
+extern void __flush_tlb_all(void);
+
+extern void __flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#ifndef CONFIG_SMP
+
+#define flush_tlb_kernel_range(start,end) \
+do {    flush_tsb_kernel_range(start,end); \
+        __flush_tlb_kernel_range(start,end); \
+} while (0)
+
+#else /* CONFIG_SMP */
+
+extern void smp_flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#define flush_tlb_kernel_range(start, end) \
+do {    flush_tsb_kernel_range(start,end); \
+        smp_flush_tlb_kernel_range(start, end); \
+} while (0)
+
+#endif /* ! CONFIG_SMP */
+
+#endif /* _SPARC64_TLBFLUSH_H */
diff --git a/arch/sparc/include/asm/topology.h b/arch/sparc/include/asm/topology.h
new file mode 100644
index 000000000000..ee4f191d394a
--- /dev/null
+++ b/arch/sparc/include/asm/topology.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TOPOLOGY_H
+#define ___ASM_SPARC_TOPOLOGY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/topology_64.h>
+#else
+#include <asm/topology_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/topology_32.h b/arch/sparc/include/asm/topology_32.h
new file mode 100644
index 000000000000..ee5ac9c9da28
--- /dev/null
+++ b/arch/sparc/include/asm/topology_32.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SPARC_TOPOLOGY_H
+#define _ASM_SPARC_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SPARC_TOPOLOGY_H */
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
new file mode 100644
index 000000000000..001c04027c82
--- /dev/null
+++ b/arch/sparc/include/asm/topology_64.h
@@ -0,0 +1,86 @@
+#ifndef _ASM_SPARC64_TOPOLOGY_H
+#define _ASM_SPARC64_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#include <asm/mmzone.h>
+
+static inline int cpu_to_node(int cpu)
+{
+        return numa_cpu_lookup_table[cpu];
+}
+
+#define parent_node(node)       (node)
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+        return numa_cpumask_lookup_table[node];
+}
+
+/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
+#define node_to_cpumask_ptr(v, node)            \
+                cpumask_t *v = &(numa_cpumask_lookup_table[node])
+
+#define node_to_cpumask_ptr_next(v, node)       \
+                           v = &(numa_cpumask_lookup_table[node])
+
+static inline int node_to_first_cpu(int node)
+{
+        cpumask_t tmp;
+        tmp = node_to_cpumask(node);
+        return first_cpu(tmp);
+}
+
+struct pci_bus;
+#ifdef CONFIG_PCI
+extern int pcibus_to_node(struct pci_bus *pbus);
+#else
+static inline int pcibus_to_node(struct pci_bus *pbus)
+{
+        return -1;
+}
+#endif
+
+#define pcibus_to_cpumask(bus)  \
+        (pcibus_to_node(bus) == -1 ? \
+         CPU_MASK_ALL : \
+         node_to_cpumask(pcibus_to_node(bus)))
+
+#define SD_NODE_INIT (struct sched_domain) {            \
+        .min_interval           = 8,                    \
+        .max_interval           = 32,                   \
+        .busy_factor            = 32,                   \
+        .imbalance_pct          = 125,                  \
+        .cache_nice_tries       = 2,                    \
+        .busy_idx               = 3,                    \
+        .idle_idx               = 2,                    \
+        .newidle_idx            = 0,                    \
+        .wake_idx               = 1,                    \
+        .forkexec_idx           = 1,                    \
+        .flags                  = SD_LOAD_BALANCE       \
+                                | SD_BALANCE_FORK       \
+                                | SD_BALANCE_EXEC       \
+                                | SD_SERIALIZE          \
+                                | SD_WAKE_BALANCE,      \
+        .last_balance           = jiffies,              \
+        .balance_interval       = 1,                    \
+}
+
+#else /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* !(CONFIG_NUMA) */
+
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu)       (cpu_data(cpu).proc_id)
+#define topology_core_id(cpu)                   (cpu_data(cpu).core_id)
+#define topology_core_siblings(cpu)             (cpu_core_map[cpu])
+#define topology_thread_siblings(cpu)           (per_cpu(cpu_sibling_map, cpu))
+#define mc_capable()                            (sparc64_multi_core)
+#define smt_capable()                           (sparc64_multi_core)
+#endif /* CONFIG_SMP */
+
+#define cpu_coregroup_map(cpu)                  (cpu_core_map[cpu])
+
+#endif /* _ASM_SPARC64_TOPOLOGY_H */
diff --git a/arch/sparc/include/asm/traps.h b/arch/sparc/include/asm/traps.h
new file mode 100644
index 000000000000..bebdbf8f43a8
--- /dev/null
+++ b/arch/sparc/include/asm/traps.h
@@ -0,0 +1,140 @@
+/*
+ * traps.h:  Format of entries for the Sparc trap table.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TRAPS_H
+#define _SPARC_TRAPS_H
+
+#define NUM_SPARC_TRAPS  255
+
+#ifndef __ASSEMBLY__
+
+/* This is for V8 compliant Sparc CPUS */
+struct tt_entry {
+        unsigned long inst_one;
+        unsigned long inst_two;
+        unsigned long inst_three;
+        unsigned long inst_four;
+};
+
+/* We set this to _start in system setup. */
+extern struct tt_entry *sparc_ttable;
+
+static inline unsigned long get_tbr(void)
+{
+        unsigned long tbr;
+
+        __asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (tbr));
+        return tbr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+/* For patching the trap table at boot time, we need to know how to
+ * form various common Sparc instructions.  Thus these macros...
+ */
+
+#define SPARC_MOV_CONST_L3(const) (0xa6102000 | (const&0xfff))
+
+/* The following assumes that the branch lies before the place we
+ * are branching to.  This is the case for a trap vector...
+ * You have been warned.
+ */
+#define SPARC_BRANCH(dest_addr, inst_addr) \
+          (0x10800000 | (((dest_addr-inst_addr)>>2)&0x3fffff))
+
+#define SPARC_RD_PSR_L0  (0xa1480000)
+#define SPARC_RD_WIM_L3  (0xa7500000)
+#define SPARC_NOP (0x01000000)
+
+/* Various interesting trap levels. */
+/* First, hardware traps. */
+#define SP_TRAP_TFLT    0x1          /* Text fault */
+#define SP_TRAP_II      0x2          /* Illegal Instruction */
+#define SP_TRAP_PI      0x3          /* Privileged Instruction */
+#define SP_TRAP_FPD     0x4          /* Floating Point Disabled */
+#define SP_TRAP_WOVF    0x5          /* Window Overflow */
+#define SP_TRAP_WUNF    0x6          /* Window Underflow */
+#define SP_TRAP_MNA     0x7          /* Memory Address Unaligned */
+#define SP_TRAP_FPE     0x8          /* Floating Point Exception */
+#define SP_TRAP_DFLT    0x9          /* Data Fault */
+#define SP_TRAP_TOF     0xa          /* Tag Overflow */
+#define SP_TRAP_WDOG    0xb          /* Watchpoint Detected */
+#define SP_TRAP_IRQ1    0x11         /* IRQ level 1 */
+#define SP_TRAP_IRQ2    0x12         /* IRQ level 2 */
+#define SP_TRAP_IRQ3    0x13         /* IRQ level 3 */
+#define SP_TRAP_IRQ4    0x14         /* IRQ level 4 */
+#define SP_TRAP_IRQ5    0x15         /* IRQ level 5 */
+#define SP_TRAP_IRQ6    0x16         /* IRQ level 6 */
+#define SP_TRAP_IRQ7    0x17         /* IRQ level 7 */
+#define SP_TRAP_IRQ8    0x18         /* IRQ level 8 */
+#define SP_TRAP_IRQ9    0x19         /* IRQ level 9 */
+#define SP_TRAP_IRQ10   0x1a         /* IRQ level 10 */
+#define SP_TRAP_IRQ11   0x1b         /* IRQ level 11 */
+#define SP_TRAP_IRQ12   0x1c         /* IRQ level 12 */
+#define SP_TRAP_IRQ13   0x1d         /* IRQ level 13 */
+#define SP_TRAP_IRQ14   0x1e         /* IRQ level 14 */
+#define SP_TRAP_IRQ15   0x1f         /* IRQ level 15 Non-maskable */
+#define SP_TRAP_RACC    0x20         /* Register Access Error ??? */
+#define SP_TRAP_IACC    0x21         /* Instruction Access Error */
+#define SP_TRAP_CPDIS   0x24         /* Co-Processor Disabled */
+#define SP_TRAP_BADFL   0x25         /* Unimplemented Flush Instruction */
+#define SP_TRAP_CPEXP   0x28         /* Co-Processor Exception */
+#define SP_TRAP_DACC    0x29         /* Data Access Error */
+#define SP_TRAP_DIVZ    0x2a         /* Divide By Zero */
+#define SP_TRAP_DSTORE  0x2b         /* Data Store Error ??? */
+#define SP_TRAP_DMM     0x2c         /* Data Access MMU Miss ??? */
+#define SP_TRAP_IMM     0x3c         /* Instruction Access MMU Miss ??? */
+
+/* Now the Software Traps... */
+#define SP_TRAP_SUNOS   0x80         /* SunOS System Call */
+#define SP_TRAP_SBPT    0x81         /* Software Breakpoint */
+#define SP_TRAP_SDIVZ   0x82         /* Software Divide-by-Zero trap */
+#define SP_TRAP_FWIN    0x83         /* Flush Windows */
+#define SP_TRAP_CWIN    0x84         /* Clean Windows */
+#define SP_TRAP_RCHK    0x85         /* Range Check */
+#define SP_TRAP_FUNA    0x86         /* Fix Unaligned Access */
+#define SP_TRAP_IOWFL   0x87         /* Integer Overflow */
+#define SP_TRAP_SOLARIS 0x88         /* Solaris System Call */
+#define SP_TRAP_NETBSD  0x89         /* NetBSD System Call */
+#define SP_TRAP_LINUX   0x90         /* Linux System Call */
+
+/* Names used for compatibility with SunOS */
+#define ST_SYSCALL              0x00
+#define ST_BREAKPOINT           0x01
+#define ST_DIV0                 0x02
+#define ST_FLUSH_WINDOWS        0x03
+#define ST_CLEAN_WINDOWS        0x04
+#define ST_RANGE_CHECK          0x05
+#define ST_FIX_ALIGN            0x06
+#define ST_INT_OVERFLOW         0x07
+
+/* Special traps... */
+#define SP_TRAP_KBPT1   0xfe         /* KADB/PROM Breakpoint one */
+#define SP_TRAP_KBPT2   0xff         /* KADB/PROM Breakpoint two */
+
+/* Handy Macros */
+/* Is this a trap we never expect to get? */
+#define BAD_TRAP_P(level) \
+        ((level > SP_TRAP_WDOG && level < SP_TRAP_IRQ1) || \
+         (level > SP_TRAP_IACC && level < SP_TRAP_CPDIS) || \
+         (level > SP_TRAP_BADFL && level < SP_TRAP_CPEXP) || \
+         (level > SP_TRAP_DMM && level < SP_TRAP_IMM) || \
+         (level > SP_TRAP_IMM && level < SP_TRAP_SUNOS) || \
+         (level > SP_TRAP_LINUX && level < SP_TRAP_KBPT1))
+
+/* Is this a Hardware trap? */
+#define HW_TRAP_P(level) ((level > 0) && (level < SP_TRAP_SUNOS))
+
+/* Is this a Software trap? */
+#define SW_TRAP_P(level) ((level >= SP_TRAP_SUNOS) && (level <= SP_TRAP_KBPT2))
+
+/* Is this a system call for some OS we know about? */
+#define SCALL_TRAP_P(level) ((level == SP_TRAP_SUNOS) || \
+                             (level == SP_TRAP_SOLARIS) || \
+                             (level == SP_TRAP_NETBSD) || \
+                             (level == SP_TRAP_LINUX))
+
+#endif /* !(_SPARC_TRAPS_H) */
diff --git a/arch/sparc/include/asm/tsb.h b/arch/sparc/include/asm/tsb.h
new file mode 100644
index 000000000000..76e4299dd9bc
--- /dev/null
+++ b/arch/sparc/include/asm/tsb.h
@@ -0,0 +1,283 @@
+#ifndef _SPARC64_TSB_H
+#define _SPARC64_TSB_H
+
+/* The sparc64 TSB is similar to the powerpc hashtables.  It's a
+ * power-of-2 sized table of TAG/PTE pairs.  The cpu precomputes
+ * pointers into this table for 8K and 64K page sizes, and also a
+ * comparison TAG based upon the virtual address and context which
+ * faults.
+ *
+ * TLB miss trap handler software does the actual lookup via something
+ * of the form:
+ *
+ *      ldxa            [%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1
+ *      ldxa            [%g0] ASI_{D,I}MMU, %g6
+ *      sllx            %g6, 22, %g6
+ *      srlx            %g6, 22, %g6
+ *      ldda            [%g1] ASI_NUCLEUS_QUAD_LDD, %g4
+ *      cmp             %g4, %g6
+ *      bne,pn  %xcc, tsb_miss_{d,i}tlb
+ *       mov            FAULT_CODE_{D,I}TLB, %g3
+ *      stxa            %g5, [%g0] ASI_{D,I}TLB_DATA_IN
+ *      retry
+ *
+ *
+ * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte
+ * PTE.  The TAG is of the same layout as the TLB TAG TARGET mmu
+ * register which is:
+ *
+ * -------------------------------------------------
+ * |  -  |  CONTEXT |  -  |    VADDR bits 63:22    |
+ * -------------------------------------------------
+ *  63 61 60      48 47 42 41                     0
+ *
+ * But actually, since we use per-mm TSB's, we zero out the CONTEXT
+ * field.
+ *
+ * Like the powerpc hashtables we need to use locking in order to
+ * synchronize while we update the entries.  PTE updates need locking
+ * as well.
+ *
+ * We need to carefully choose a lock bits for the TSB entry.  We
+ * choose to use bit 47 in the tag.  Also, since we never map anything
+ * at page zero in context zero, we use zero as an invalid tag entry.
+ * When the lock bit is set, this forces a tag comparison failure.
+ */
+
+#define TSB_TAG_LOCK_BIT        47
+#define TSB_TAG_LOCK_HIGH       (1 << (TSB_TAG_LOCK_BIT - 32))
+
+#define TSB_TAG_INVALID_BIT     46
+#define TSB_TAG_INVALID_HIGH    (1 << (TSB_TAG_INVALID_BIT - 32))
+
+#define TSB_MEMBAR      membar  #StoreStore
+
+/* Some cpus support physical address quad loads.  We want to use
+ * those if possible so we don't need to hard-lock the TSB mapping
+ * into the TLB.  We encode some instruction patching in order to
+ * support this.
+ *
+ * The kernel TSB is locked into the TLB by virtue of being in the
+ * kernel image, so we don't play these games for swapper_tsb access.
+ */
+#ifndef __ASSEMBLY__
+struct tsb_ldquad_phys_patch_entry {
+        unsigned int    addr;
+        unsigned int    sun4u_insn;
+        unsigned int    sun4v_insn;
+};
+extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch,
+        __tsb_ldquad_phys_patch_end;
+
+struct tsb_phys_patch_entry {
+        unsigned int    addr;
+        unsigned int    insn;
+};
+extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
+#endif
+#define TSB_LOAD_QUAD(TSB, REG) \
+661:    ldda            [TSB] ASI_NUCLEUS_QUAD_LDD, REG; \
+        .section        .tsb_ldquad_phys_patch, "ax"; \
+        .word           661b; \
+        ldda            [TSB] ASI_QUAD_LDD_PHYS, REG; \
+        ldda            [TSB] ASI_QUAD_LDD_PHYS_4V, REG; \
+        .previous
+
+#define TSB_LOAD_TAG_HIGH(TSB, REG) \
+661:    lduwa           [TSB] ASI_N, REG; \
+        .section        .tsb_phys_patch, "ax"; \
+        .word           661b; \
+        lduwa           [TSB] ASI_PHYS_USE_EC, REG; \
+        .previous
+
+#define TSB_LOAD_TAG(TSB, REG) \
+661:    ldxa            [TSB] ASI_N, REG; \
+        .section        .tsb_phys_patch, "ax"; \
+        .word           661b; \
+        ldxa            [TSB] ASI_PHYS_USE_EC, REG; \
+        .previous
+
+#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \
+661:    casa            [TSB] ASI_N, REG1, REG2; \
+        .section        .tsb_phys_patch, "ax"; \
+        .word           661b; \
+        casa            [TSB] ASI_PHYS_USE_EC, REG1, REG2; \
+        .previous
+
+#define TSB_CAS_TAG(TSB, REG1, REG2) \
+661:    casxa           [TSB] ASI_N, REG1, REG2; \
+        .section        .tsb_phys_patch, "ax"; \
+        .word           661b; \
+        casxa           [TSB] ASI_PHYS_USE_EC, REG1, REG2; \
+        .previous
+
+#define TSB_STORE(ADDR, VAL) \
+661:    stxa            VAL, [ADDR] ASI_N; \
+        .section        .tsb_phys_patch, "ax"; \
+        .word           661b; \
+        stxa            VAL, [ADDR] ASI_PHYS_USE_EC; \
+        .previous
+
+#define TSB_LOCK_TAG(TSB, REG1, REG2)   \
+99:     TSB_LOAD_TAG_HIGH(TSB, REG1);   \
+        sethi   %hi(TSB_TAG_LOCK_HIGH), REG2;\
+        andcc   REG1, REG2, %g0;        \
+        bne,pn  %icc, 99b;              \
+         nop;                           \
+        TSB_CAS_TAG_HIGH(TSB, REG1, REG2);      \
+        cmp     REG1, REG2;             \
+        bne,pn  %icc, 99b;              \
+         nop;                           \
+        TSB_MEMBAR
+
+#define TSB_WRITE(TSB, TTE, TAG) \
+        add     TSB, 0x8, TSB;   \
+        TSB_STORE(TSB, TTE);     \
+        sub     TSB, 0x8, TSB;   \
+        TSB_MEMBAR;              \
+        TSB_STORE(TSB, TAG);
+
+#define KTSB_LOAD_QUAD(TSB, REG) \
+        ldda            [TSB] ASI_NUCLEUS_QUAD_LDD, REG;
+
+#define KTSB_STORE(ADDR, VAL) \
+        stxa            VAL, [ADDR] ASI_N;
+
+#define KTSB_LOCK_TAG(TSB, REG1, REG2)  \
+99:     lduwa   [TSB] ASI_N, REG1;      \
+        sethi   %hi(TSB_TAG_LOCK_HIGH), REG2;\
+        andcc   REG1, REG2, %g0;        \
+        bne,pn  %icc, 99b;              \
+         nop;                           \
+        casa    [TSB] ASI_N, REG1, REG2;\
+        cmp     REG1, REG2;             \
+        bne,pn  %icc, 99b;              \
+         nop;                           \
+        TSB_MEMBAR
+
+#define KTSB_WRITE(TSB, TTE, TAG) \
+        add     TSB, 0x8, TSB;   \
+        stxa    TTE, [TSB] ASI_N;     \
+        sub     TSB, 0x8, TSB;   \
+        TSB_MEMBAR;              \
+        stxa    TAG, [TSB] ASI_N;
+
+        /* Do a kernel page table walk.  Leaves physical PTE pointer in
+         * REG1.  Jumps to FAIL_LABEL on early page table walk termination.
+         * VADDR will not be clobbered, but REG2 will.
+         */
+#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL)        \
+        sethi           %hi(swapper_pg_dir), REG1; \
+        or              REG1, %lo(swapper_pg_dir), REG1; \
+        sllx            VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
+        srlx            REG2, 64 - PAGE_SHIFT, REG2; \
+        andn            REG2, 0x3, REG2; \
+        lduw            [REG1 + REG2], REG1; \
+        brz,pn          REG1, FAIL_LABEL; \
+         sllx           VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
+        srlx            REG2, 64 - PAGE_SHIFT, REG2; \
+        sllx            REG1, 11, REG1; \
+        andn            REG2, 0x3, REG2; \
+        lduwa           [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
+        brz,pn          REG1, FAIL_LABEL; \
+         sllx           VADDR, 64 - PMD_SHIFT, REG2; \
+        srlx            REG2, 64 - PAGE_SHIFT, REG2; \
+        sllx            REG1, 11, REG1; \
+        andn            REG2, 0x7, REG2; \
+        add             REG1, REG2, REG1;
+
+        /* Do a user page table walk in MMU globals.  Leaves physical PTE
+         * pointer in REG1.  Jumps to FAIL_LABEL on early page table walk
+         * termination.  Physical base of page tables is in PHYS_PGD which
+         * will not be modified.
+         *
+         * VADDR will not be clobbered, but REG1 and REG2 will.
+         */
+#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL)  \
+        sllx            VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
+        srlx            REG2, 64 - PAGE_SHIFT, REG2; \
+        andn            REG2, 0x3, REG2; \
+        lduwa           [PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \
+        brz,pn          REG1, FAIL_LABEL; \
+         sllx           VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
+        srlx            REG2, 64 - PAGE_SHIFT, REG2; \
+        sllx            REG1, 11, REG1; \
+        andn            REG2, 0x3, REG2; \
+        lduwa           [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
+        brz,pn          REG1, FAIL_LABEL; \
+         sllx           VADDR, 64 - PMD_SHIFT, REG2; \
+        srlx            REG2, 64 - PAGE_SHIFT, REG2; \
+        sllx            REG1, 11, REG1; \
+        andn            REG2, 0x7, REG2; \
+        add             REG1, REG2, REG1;
+
+/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0.
+ * If no entry is found, FAIL_LABEL will be branched to.  On success
+ * the resulting PTE value will be left in REG1.  VADDR is preserved
+ * by this routine.
+ */
+#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \
+        sethi           %hi(prom_trans), REG1; \
+        or              REG1, %lo(prom_trans), REG1; \
+97:     ldx             [REG1 + 0x00], REG2; \
+        brz,pn          REG2, FAIL_LABEL; \
+         nop; \
+        ldx             [REG1 + 0x08], REG3; \
+        add             REG2, REG3, REG3; \
+        cmp             REG2, VADDR; \
+        bgu,pt          %xcc, 98f; \
+         cmp            VADDR, REG3; \
+        bgeu,pt         %xcc, 98f; \
+         ldx            [REG1 + 0x10], REG3; \
+        sub             VADDR, REG2, REG2; \
+        ba,pt           %xcc, 99f; \
+         add            REG3, REG2, REG1; \
+98:     ba,pt           %xcc, 97b; \
+         add            REG1, (3 * 8), REG1; \
+99:
+
+        /* We use a 32K TSB for the whole kernel, this allows to
+         * handle about 16MB of modules and vmalloc mappings without
+         * incurring many hash conflicts.
+         */
+#define KERNEL_TSB_SIZE_BYTES   (32 * 1024)
+#define KERNEL_TSB_NENTRIES     \
+        (KERNEL_TSB_SIZE_BYTES / 16)
+#define KERNEL_TSB4M_NENTRIES   4096
+
+        /* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
+         * on TSB hit.  REG1, REG2, REG3, and REG4 are used as temporaries
+         * and the found TTE will be left in REG1.  REG3 and REG4 must
+         * be an even/odd pair of registers.
+         *
+         * VADDR and TAG will be preserved and not clobbered by this macro.
+         */
+#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
+        sethi           %hi(swapper_tsb), REG1; \
+        or              REG1, %lo(swapper_tsb), REG1; \
+        srlx            VADDR, PAGE_SHIFT, REG2; \
+        and             REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
+        sllx            REG2, 4, REG2; \
+        add             REG1, REG2, REG2; \
+        KTSB_LOAD_QUAD(REG2, REG3); \
+        cmp             REG3, TAG; \
+        be,a,pt         %xcc, OK_LABEL; \
+         mov            REG4, REG1;
+
+#ifndef CONFIG_DEBUG_PAGEALLOC
+        /* This version uses a trick, the TAG is already (VADDR >> 22) so
+         * we can make use of that for the index computation.
+         */
+#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
+        sethi           %hi(swapper_4m_tsb), REG1; \
+        or              REG1, %lo(swapper_4m_tsb), REG1; \
+        and             TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \
+        sllx            REG2, 4, REG2; \
+        add             REG1, REG2, REG2; \
+        KTSB_LOAD_QUAD(REG2, REG3); \
+        cmp             REG3, TAG; \
+        be,a,pt         %xcc, OK_LABEL; \
+         mov            REG4, REG1;
+#endif
+
+#endif /* !(_SPARC64_TSB_H) */
diff --git a/arch/sparc/include/asm/tsunami.h b/arch/sparc/include/asm/tsunami.h
new file mode 100644
index 000000000000..5bbd1d523baa
--- /dev/null
+++ b/arch/sparc/include/asm/tsunami.h
@@ -0,0 +1,64 @@
+/*
+ * tsunami.h:  Module specific definitions for Tsunami V8 Sparcs
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TSUNAMI_H
+#define _SPARC_TSUNAMI_H
+
+#include <asm/asi.h>
+
+/* The MMU control register on the Tsunami:
+ *
+ * -----------------------------------------------------------------------
+ * | implvers |SW|AV|DV|MV| RSV |PC|ITD|ALC| RSV |PE| RC |IE|DE|RSV|NF|ME|
+ * -----------------------------------------------------------------------
+ *  31      24 23 22 21 20 19-18 17  16 14  13-12 11 10-9  8  7 6-2  1  0
+ *
+ * SW: Enable Software Table Walks  0=off 1=on
+ * AV: Address View bit
+ * DV: Data View bit
+ * MV: Memory View bit
+ * PC: Parity Control
+ * ITD: ITBR disable
+ * ALC: Alternate Cacheable
+ * PE: Parity Enable   0=off 1=on
+ * RC: Refresh Control
+ * IE: Instruction cache Enable  0=off 1=on
+ * DE: Data cache Enable  0=off 1=on
+ * NF: No Fault, same as all other SRMMUs
+ * ME: MMU Enable, same as all other SRMMUs
+ */
+
+#define TSUNAMI_SW        0x00800000
+#define TSUNAMI_AV        0x00400000
+#define TSUNAMI_DV        0x00200000
+#define TSUNAMI_MV        0x00100000
+#define TSUNAMI_PC        0x00020000
+#define TSUNAMI_ITD       0x00010000
+#define TSUNAMI_ALC       0x00008000
+#define TSUNAMI_PE        0x00001000
+#define TSUNAMI_RCMASK    0x00000C00
+#define TSUNAMI_IENAB     0x00000200
+#define TSUNAMI_DENAB     0x00000100
+#define TSUNAMI_NF        0x00000002
+#define TSUNAMI_ME        0x00000001
+
+static inline void tsunami_flush_icache(void)
+{
+        __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+                             : /* no outputs */
+                             : "i" (ASI_M_IC_FLCLEAR)
+                             : "memory");
+}
+
+static inline void tsunami_flush_dcache(void)
+{
+        __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+                             : /* no outputs */
+                             : "i" (ASI_M_DC_FLCLEAR)
+                             : "memory");
+}
+
+#endif /* !(_SPARC_TSUNAMI_H) */
diff --git a/arch/sparc/include/asm/ttable.h b/arch/sparc/include/asm/ttable.h
new file mode 100644
index 000000000000..5708ba2719fb
--- /dev/null
+++ b/arch/sparc/include/asm/ttable.h
@@ -0,0 +1,658 @@
+#ifndef _SPARC64_TTABLE_H
+#define _SPARC64_TTABLE_H
+
+#include <asm/utrap.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>
+#endif
+
+#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop;
+
+/* We need a "cleaned" instruction... */
+#define CLEAN_WINDOW                                                    \
+        rdpr    %cleanwin, %l0;         add     %l0, 1, %l0;            \
+        wrpr    %l0, 0x0, %cleanwin;                                    \
+        clr     %o0;    clr     %o1;    clr     %o2;    clr     %o3;    \
+        clr     %o4;    clr     %o5;    clr     %o6;    clr     %o7;    \
+        clr     %l0;    clr     %l1;    clr     %l2;    clr     %l3;    \
+        clr     %l4;    clr     %l5;    clr     %l6;    clr     %l7;    \
+        retry;                                                          \
+        nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;
+
+#define TRAP(routine)                                   \
+        sethi   %hi(109f), %g7;                         \
+        ba,pt   %xcc, etrap;                            \
+109:     or     %g7, %lo(109b), %g7;                    \
+        call    routine;                                \
+         add    %sp, PTREGS_OFF, %o0;                   \
+        ba,pt   %xcc, rtrap;                            \
+         nop;                                           \
+        nop;
+
+#define TRAP_7INSNS(routine)                            \
+        sethi   %hi(109f), %g7;                         \
+        ba,pt   %xcc, etrap;                            \
+109:     or     %g7, %lo(109b), %g7;                    \
+        call    routine;                                \
+         add    %sp, PTREGS_OFF, %o0;                   \
+        ba,pt   %xcc, rtrap;                            \
+         nop;
+
+#define TRAP_SAVEFPU(routine)                           \
+        sethi   %hi(109f), %g7;                         \
+        ba,pt   %xcc, do_fptrap;                        \
+109:     or     %g7, %lo(109b), %g7;                    \
+        call    routine;                                \
+         add    %sp, PTREGS_OFF, %o0;                   \
+        ba,pt   %xcc, rtrap;                            \
+         nop;                                           \
+        nop;
+
+#define TRAP_NOSAVE(routine)                            \
+        ba,pt   %xcc, routine;                          \
+         nop;                                           \
+        nop; nop; nop; nop; nop; nop;
+
+#define TRAP_NOSAVE_7INSNS(routine)                     \
+        ba,pt   %xcc, routine;                          \
+         nop;                                           \
+        nop; nop; nop; nop; nop;
+
+#define TRAPTL1(routine)                                \
+        sethi   %hi(109f), %g7;                         \
+        ba,pt   %xcc, etraptl1;                         \
+109:     or     %g7, %lo(109b), %g7;                    \
+        call    routine;                                \
+         add    %sp, PTREGS_OFF, %o0;                   \
+        ba,pt   %xcc, rtrap;                            \
+         nop;                                           \
+        nop;
+
+#define TRAP_ARG(routine, arg)                          \
+        sethi   %hi(109f), %g7;                         \
+        ba,pt   %xcc, etrap;                            \
+109:     or     %g7, %lo(109b), %g7;                    \
+        add     %sp, PTREGS_OFF, %o0;                   \
+        call    routine;                                \
+         mov    arg, %o1;                               \
+        ba,pt   %xcc, rtrap;                            \
+         nop;
+
+#define TRAPTL1_ARG(routine, arg)                       \
+        sethi   %hi(109f), %g7;                         \
+        ba,pt   %xcc, etraptl1;                         \
+109:     or     %g7, %lo(109b), %g7;                    \
+        add     %sp, PTREGS_OFF, %o0;                   \
+        call    routine;                                \
+         mov    arg, %o1;                               \
+        ba,pt   %xcc, rtrap;                            \
+         nop;
+
+#define SYSCALL_TRAP(routine, systbl)                   \
+        rdpr    %pil, %g2;                              \
+        mov     TSTATE_SYSCALL, %g3;                    \
+        sethi   %hi(109f), %g7;                         \
+        ba,pt   %xcc, etrap_syscall;                    \
+109:     or     %g7, %lo(109b), %g7;                    \
+        sethi   %hi(systbl), %l7;                       \
+        ba,pt   %xcc, routine;                          \
+         or     %l7, %lo(systbl), %l7;
+
+#define TRAP_UTRAP(handler,lvl)                         \
+        mov     handler, %g3;                           \
+        ba,pt   %xcc, utrap_trap;                       \
+         mov    lvl, %g4;                               \
+        nop;                                            \
+        nop;                                            \
+        nop;                                            \
+        nop;                                            \
+        nop;
+
+#ifdef CONFIG_COMPAT
+#define LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32)
+#else
+#define LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110)
+#endif
+#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64)
+#define GETCC_TRAP TRAP(getcc)
+#define SETCC_TRAP TRAP(setcc)
+#define BREAKPOINT_TRAP TRAP(breakpoint_trap)
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+#define TRAP_IRQ(routine, level)                        \
+        rdpr    %pil, %g2;                              \
+        wrpr    %g0, 15, %pil;                          \
+        sethi   %hi(1f-4), %g7;                         \
+        ba,pt   %xcc, etrap_irq;                        \
+         or     %g7, %lo(1f-4), %g7;                    \
+        nop;                                            \
+        nop;                                            \
+        nop;                                            \
+        .subsection     2;                              \
+1:      call    trace_hardirqs_off;                     \
+         nop;                                           \
+        mov     level, %o0;                             \
+        call    routine;                                \
+         add    %sp, PTREGS_OFF, %o1;                   \
+        ba,a,pt %xcc, rtrap_irq;                        \
+        .previous;
+
+#else
+
+#define TRAP_IRQ(routine, level)                        \
+        rdpr    %pil, %g2;                              \
+        wrpr    %g0, 15, %pil;                          \
+        ba,pt   %xcc, etrap_irq;                        \
+         rd     %pc, %g7;                               \
+        mov     level, %o0;                             \
+        call    routine;                                \
+         add    %sp, PTREGS_OFF, %o1;                   \
+        ba,a,pt %xcc, rtrap_irq;
+
+#endif
+
+#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
+
+#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl)
+
+#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl)
+
+#define FLUSH_WINDOW_TRAP                                               \
+        ba,pt   %xcc, etrap;                                            \
+         rd     %pc, %g7;                                               \
+        flushw;                                                         \
+        ldx     [%sp + PTREGS_OFF + PT_V9_TNPC], %l1;                   \
+        add     %l1, 4, %l2;                                            \
+        stx     %l1, [%sp + PTREGS_OFF + PT_V9_TPC];                    \
+        ba,pt   %xcc, rtrap;                                            \
+         stx    %l2, [%sp + PTREGS_OFF + PT_V9_TNPC];
+
+#ifdef CONFIG_KPROBES
+#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl)
+#else
+#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
+#endif
+
+#ifdef CONFIG_KGDB
+#define KGDB_TRAP(lvl) TRAP_IRQ(kgdb_trap, lvl)
+#else
+#define KGDB_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
+#endif
+
+#define SUN4V_ITSB_MISS                                 \
+        ldxa    [%g0] ASI_SCRATCHPAD, %g2;              \
+        ldx     [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4;    \
+        ldx     [%g2 + HV_FAULT_I_CTX_OFFSET], %g5;     \
+        srlx    %g4, 22, %g6;                           \
+        ba,pt   %xcc, sun4v_itsb_miss;                  \
+         nop;                                           \
+        nop;                                            \
+        nop;
+
+#define SUN4V_DTSB_MISS                                 \
+        ldxa    [%g0] ASI_SCRATCHPAD, %g2;              \
+        ldx     [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4;    \
+        ldx     [%g2 + HV_FAULT_D_CTX_OFFSET], %g5;     \
+        srlx    %g4, 22, %g6;                           \
+        ba,pt   %xcc, sun4v_dtsb_miss;                  \
+         nop;                                           \
+        nop;                                            \
+        nop;
+
+/* Before touching these macros, you owe it to yourself to go and
+ * see how arch/sparc64/kernel/winfixup.S works... -DaveM
+ *
+ * For the user cases we used to use the %asi register, but
+ * it turns out that the "wr xxx, %asi" costs ~5 cycles, so
+ * now we use immediate ASI loads and stores instead.  Kudos
+ * to Greg Onufer for pointing out this performance anomaly.
+ *
+ * Further note that we cannot use the g2, g4, g5, and g7 alternate
+ * globals in the spill routines, check out the save instruction in
+ * arch/sparc64/kernel/etrap.S to see what I mean about g2, and
+ * g4/g5 are the globals which are preserved by etrap processing
+ * for the caller of it.  The g7 register is the return pc for
+ * etrap.  Finally, g6 is the current thread register so we cannot
+ * us it in the spill handlers either.  Most of these rules do not
+ * apply to fill processing, only g6 is not usable.
+ */
+
+/* Normal kernel spill */
+#define SPILL_0_NORMAL                                  \
+        stx     %l0, [%sp + STACK_BIAS + 0x00];         \
+        stx     %l1, [%sp + STACK_BIAS + 0x08];         \
+        stx     %l2, [%sp + STACK_BIAS + 0x10];         \
+        stx     %l3, [%sp + STACK_BIAS + 0x18];         \
+        stx     %l4, [%sp + STACK_BIAS + 0x20];         \
+        stx     %l5, [%sp + STACK_BIAS + 0x28];         \
+        stx     %l6, [%sp + STACK_BIAS + 0x30];         \
+        stx     %l7, [%sp + STACK_BIAS + 0x38];         \
+        stx     %i0, [%sp + STACK_BIAS + 0x40];         \
+        stx     %i1, [%sp + STACK_BIAS + 0x48];         \
+        stx     %i2, [%sp + STACK_BIAS + 0x50];         \
+        stx     %i3, [%sp + STACK_BIAS + 0x58];         \
+        stx     %i4, [%sp + STACK_BIAS + 0x60];         \
+        stx     %i5, [%sp + STACK_BIAS + 0x68];         \
+        stx     %i6, [%sp + STACK_BIAS + 0x70];         \
+        stx     %i7, [%sp + STACK_BIAS + 0x78];         \
+        saved; retry; nop; nop; nop; nop; nop; nop;     \
+        nop; nop; nop; nop; nop; nop; nop; nop;
+
+#define SPILL_0_NORMAL_ETRAP                            \
+etrap_kernel_spill:                                     \
+        stx     %l0, [%sp + STACK_BIAS + 0x00];         \
+        stx     %l1, [%sp + STACK_BIAS + 0x08];         \
+        stx     %l2, [%sp + STACK_BIAS + 0x10];         \
+        stx     %l3, [%sp + STACK_BIAS + 0x18];         \
+        stx     %l4, [%sp + STACK_BIAS + 0x20];         \
+        stx     %l5, [%sp + STACK_BIAS + 0x28];         \
+        stx     %l6, [%sp + STACK_BIAS + 0x30];         \
+        stx     %l7, [%sp + STACK_BIAS + 0x38];         \
+        stx     %i0, [%sp + STACK_BIAS + 0x40];         \
+        stx     %i1, [%sp + STACK_BIAS + 0x48];         \
+        stx     %i2, [%sp + STACK_BIAS + 0x50];         \
+        stx     %i3, [%sp + STACK_BIAS + 0x58];         \
+        stx     %i4, [%sp + STACK_BIAS + 0x60];         \
+        stx     %i5, [%sp + STACK_BIAS + 0x68];         \
+        stx     %i6, [%sp + STACK_BIAS + 0x70];         \
+        stx     %i7, [%sp + STACK_BIAS + 0x78];         \
+        saved;                                          \
+        sub     %g1, 2, %g1;                            \
+        ba,pt   %xcc, etrap_save;                       \
+        wrpr    %g1, %cwp;                              \
+        nop; nop; nop; nop; nop; nop; nop; nop;         \
+        nop; nop; nop; nop;
+
+/* Normal 64bit spill */
+#define SPILL_1_GENERIC(ASI)                            \
+        add     %sp, STACK_BIAS + 0x00, %g1;            \
+        stxa    %l0, [%g1 + %g0] ASI;                   \
+        mov     0x08, %g3;                              \
+        stxa    %l1, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x10, %g1;                         \
+        stxa    %l2, [%g1 + %g0] ASI;                   \
+        stxa    %l3, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x10, %g1;                         \
+        stxa    %l4, [%g1 + %g0] ASI;                   \
+        stxa    %l5, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x10, %g1;                         \
+        stxa    %l6, [%g1 + %g0] ASI;                   \
+        stxa    %l7, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x10, %g1;                         \
+        stxa    %i0, [%g1 + %g0] ASI;                   \
+        stxa    %i1, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x10, %g1;                         \
+        stxa    %i2, [%g1 + %g0] ASI;                   \
+        stxa    %i3, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x10, %g1;                         \
+        stxa    %i4, [%g1 + %g0] ASI;                   \
+        stxa    %i5, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x10, %g1;                         \
+        stxa    %i6, [%g1 + %g0] ASI;                   \
+        stxa    %i7, [%g1 + %g3] ASI;                   \
+        saved;                                          \
+        retry; nop; nop;                                \
+        b,a,pt  %xcc, spill_fixup_dax;                  \
+        b,a,pt  %xcc, spill_fixup_mna;                  \
+        b,a,pt  %xcc, spill_fixup;
+
+#define SPILL_1_GENERIC_ETRAP                           \
+etrap_user_spill_64bit:                                 \
+        stxa    %l0, [%sp + STACK_BIAS + 0x00] %asi;    \
+        stxa    %l1, [%sp + STACK_BIAS + 0x08] %asi;    \
+        stxa    %l2, [%sp + STACK_BIAS + 0x10] %asi;    \
+        stxa    %l3, [%sp + STACK_BIAS + 0x18] %asi;    \
+        stxa    %l4, [%sp + STACK_BIAS + 0x20] %asi;    \
+        stxa    %l5, [%sp + STACK_BIAS + 0x28] %asi;    \
+        stxa    %l6, [%sp + STACK_BIAS + 0x30] %asi;    \
+        stxa    %l7, [%sp + STACK_BIAS + 0x38] %asi;    \
+        stxa    %i0, [%sp + STACK_BIAS + 0x40] %asi;    \
+        stxa    %i1, [%sp + STACK_BIAS + 0x48] %asi;    \
+        stxa    %i2, [%sp + STACK_BIAS + 0x50] %asi;    \
+        stxa    %i3, [%sp + STACK_BIAS + 0x58] %asi;    \
+        stxa    %i4, [%sp + STACK_BIAS + 0x60] %asi;    \
+        stxa    %i5, [%sp + STACK_BIAS + 0x68] %asi;    \
+        stxa    %i6, [%sp + STACK_BIAS + 0x70] %asi;    \
+        stxa    %i7, [%sp + STACK_BIAS + 0x78] %asi;    \
+        saved;                                          \
+        sub     %g1, 2, %g1;                            \
+        ba,pt   %xcc, etrap_save;                       \
+         wrpr   %g1, %cwp;                              \
+        nop; nop; nop; nop; nop;                        \
+        nop; nop; nop; nop;                             \
+        ba,a,pt %xcc, etrap_spill_fixup_64bit;          \
+        ba,a,pt %xcc, etrap_spill_fixup_64bit;          \
+        ba,a,pt %xcc, etrap_spill_fixup_64bit;
+
+#define SPILL_1_GENERIC_ETRAP_FIXUP                     \
+etrap_spill_fixup_64bit:                                \
+        ldub    [%g6 + TI_WSAVED], %g1;                 \
+        sll     %g1, 3, %g3;                            \
+        add     %g6, %g3, %g3;                          \
+        stx     %sp, [%g3 + TI_RWIN_SPTRS];             \
+        sll     %g1, 7, %g3;                            \
+        add     %g6, %g3, %g3;                          \
+        stx     %l0, [%g3 + TI_REG_WINDOW + 0x00];      \
+        stx     %l1, [%g3 + TI_REG_WINDOW + 0x08];      \
+        stx     %l2, [%g3 + TI_REG_WINDOW + 0x10];      \
+        stx     %l3, [%g3 + TI_REG_WINDOW + 0x18];      \
+        stx     %l4, [%g3 + TI_REG_WINDOW + 0x20];      \
+        stx     %l5, [%g3 + TI_REG_WINDOW + 0x28];      \
+        stx     %l6, [%g3 + TI_REG_WINDOW + 0x30];      \
+        stx     %l7, [%g3 + TI_REG_WINDOW + 0x38];      \
+        stx     %i0, [%g3 + TI_REG_WINDOW + 0x40];      \
+        stx     %i1, [%g3 + TI_REG_WINDOW + 0x48];      \
+        stx     %i2, [%g3 + TI_REG_WINDOW + 0x50];      \
+        stx     %i3, [%g3 + TI_REG_WINDOW + 0x58];      \
+        stx     %i4, [%g3 + TI_REG_WINDOW + 0x60];      \
+        stx     %i5, [%g3 + TI_REG_WINDOW + 0x68];      \
+        stx     %i6, [%g3 + TI_REG_WINDOW + 0x70];      \
+        stx     %i7, [%g3 + TI_REG_WINDOW + 0x78];      \
+        add     %g1, 1, %g1;                            \
+        stb     %g1, [%g6 + TI_WSAVED];                 \
+        saved;                                          \
+        rdpr    %cwp, %g1;                              \
+        sub     %g1, 2, %g1;                            \
+        ba,pt   %xcc, etrap_save;                       \
+         wrpr   %g1, %cwp;                              \
+        nop; nop; nop
+
+/* Normal 32bit spill */
+#define SPILL_2_GENERIC(ASI)                            \
+        srl     %sp, 0, %sp;                            \
+        stwa    %l0, [%sp + %g0] ASI;                   \
+        mov     0x04, %g3;                              \
+        stwa    %l1, [%sp + %g3] ASI;                   \
+        add     %sp, 0x08, %g1;                         \
+        stwa    %l2, [%g1 + %g0] ASI;                   \
+        stwa    %l3, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x08, %g1;                         \
+        stwa    %l4, [%g1 + %g0] ASI;                   \
+        stwa    %l5, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x08, %g1;                         \
+        stwa    %l6, [%g1 + %g0] ASI;                   \
+        stwa    %l7, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x08, %g1;                         \
+        stwa    %i0, [%g1 + %g0] ASI;                   \
+        stwa    %i1, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x08, %g1;                         \
+        stwa    %i2, [%g1 + %g0] ASI;                   \
+        stwa    %i3, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x08, %g1;                         \
+        stwa    %i4, [%g1 + %g0] ASI;                   \
+        stwa    %i5, [%g1 + %g3] ASI;                   \
+        add     %g1, 0x08, %g1;                         \
+        stwa    %i6, [%g1 + %g0] ASI;                   \
+        stwa    %i7, [%g1 + %g3] ASI;                   \
+        saved;                                          \
+        retry; nop; nop;                                \
+        b,a,pt  %xcc, spill_fixup_dax;                  \
+        b,a,pt  %xcc, spill_fixup_mna;                  \
+        b,a,pt  %xcc, spill_fixup;
+
+#define SPILL_2_GENERIC_ETRAP           \
+etrap_user_spill_32bit:                 \
+        srl     %sp, 0, %sp;            \
+        stwa    %l0, [%sp + 0x00] %asi; \
+        stwa    %l1, [%sp + 0x04] %asi; \
+        stwa    %l2, [%sp + 0x08] %asi; \
+        stwa    %l3, [%sp + 0x0c] %asi; \
+        stwa    %l4, [%sp + 0x10] %asi; \
+        stwa    %l5, [%sp + 0x14] %asi; \
+        stwa    %l6, [%sp + 0x18] %asi; \
+        stwa    %l7, [%sp + 0x1c] %asi; \
+        stwa    %i0, [%sp + 0x20] %asi; \
+        stwa    %i1, [%sp + 0x24] %asi; \
+        stwa    %i2, [%sp + 0x28] %asi; \
+        stwa    %i3, [%sp + 0x2c] %asi; \
+        stwa    %i4, [%sp + 0x30] %asi; \
+        stwa    %i5, [%sp + 0x34] %asi; \
+        stwa    %i6, [%sp + 0x38] %asi; \
+        stwa    %i7, [%sp + 0x3c] %asi; \
+        saved;                          \
+        sub     %g1, 2, %g1;            \
+        ba,pt   %xcc, etrap_save;       \
+         wrpr   %g1, %cwp;              \
+        nop; nop; nop; nop;             \
+        nop; nop; nop; nop;             \
+        ba,a,pt %xcc, etrap_spill_fixup_32bit; \
+        ba,a,pt %xcc, etrap_spill_fixup_32bit; \
+        ba,a,pt %xcc, etrap_spill_fixup_32bit;
+
+#define SPILL_2_GENERIC_ETRAP_FIXUP                     \
+etrap_spill_fixup_32bit:                                \
+        ldub    [%g6 + TI_WSAVED], %g1;                 \
+        sll     %g1, 3, %g3;                            \
+        add     %g6, %g3, %g3;                          \
+        stx     %sp, [%g3 + TI_RWIN_SPTRS];             \
+        sll     %g1, 7, %g3;                            \
+        add     %g6, %g3, %g3;                          \
+        stw     %l0, [%g3 + TI_REG_WINDOW + 0x00];      \
+        stw     %l1, [%g3 + TI_REG_WINDOW + 0x04];      \
+        stw     %l2, [%g3 + TI_REG_WINDOW + 0x08];      \
+        stw     %l3, [%g3 + TI_REG_WINDOW + 0x0c];      \
+        stw     %l4, [%g3 + TI_REG_WINDOW + 0x10];      \
+        stw     %l5, [%g3 + TI_REG_WINDOW + 0x14];      \
+        stw     %l6, [%g3 + TI_REG_WINDOW + 0x18];      \
+        stw     %l7, [%g3 + TI_REG_WINDOW + 0x1c];      \
+        stw     %i0, [%g3 + TI_REG_WINDOW + 0x20];      \
+        stw     %i1, [%g3 + TI_REG_WINDOW + 0x24];      \
+        stw     %i2, [%g3 + TI_REG_WINDOW + 0x28];      \
+        stw     %i3, [%g3 + TI_REG_WINDOW + 0x2c];      \
+        stw     %i4, [%g3 + TI_REG_WINDOW + 0x30];      \
+        stw     %i5, [%g3 + TI_REG_WINDOW + 0x34];      \
+        stw     %i6, [%g3 + TI_REG_WINDOW + 0x38];      \
+        stw     %i7, [%g3 + TI_REG_WINDOW + 0x3c];      \
+        add     %g1, 1, %g1;                            \
+        stb     %g1, [%g6 + TI_WSAVED];                 \
+        saved;                                          \
+        rdpr    %cwp, %g1;                              \
+        sub     %g1, 2, %g1;                            \
+        ba,pt   %xcc, etrap_save;                       \
+         wrpr   %g1, %cwp;                              \
+        nop; nop; nop
+
+#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP)
+#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP)
+#define SPILL_3_NORMAL SPILL_0_NORMAL
+#define SPILL_4_NORMAL SPILL_0_NORMAL
+#define SPILL_5_NORMAL SPILL_0_NORMAL
+#define SPILL_6_NORMAL SPILL_0_NORMAL
+#define SPILL_7_NORMAL SPILL_0_NORMAL
+
+#define SPILL_0_OTHER SPILL_0_NORMAL
+#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS)
+#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS)
+#define SPILL_3_OTHER SPILL_3_NORMAL
+#define SPILL_4_OTHER SPILL_4_NORMAL
+#define SPILL_5_OTHER SPILL_5_NORMAL
+#define SPILL_6_OTHER SPILL_6_NORMAL
+#define SPILL_7_OTHER SPILL_7_NORMAL
+
+/* Normal kernel fill */
+#define FILL_0_NORMAL                                   \
+        ldx     [%sp + STACK_BIAS + 0x00], %l0;         \
+        ldx     [%sp + STACK_BIAS + 0x08], %l1;         \
+        ldx     [%sp + STACK_BIAS + 0x10], %l2;         \
+        ldx     [%sp + STACK_BIAS + 0x18], %l3;         \
+        ldx     [%sp + STACK_BIAS + 0x20], %l4;         \
+        ldx     [%sp + STACK_BIAS + 0x28], %l5;         \
+        ldx     [%sp + STACK_BIAS + 0x30], %l6;         \
+        ldx     [%sp + STACK_BIAS + 0x38], %l7;         \
+        ldx     [%sp + STACK_BIAS + 0x40], %i0;         \
+        ldx     [%sp + STACK_BIAS + 0x48], %i1;         \
+        ldx     [%sp + STACK_BIAS + 0x50], %i2;         \
+        ldx     [%sp + STACK_BIAS + 0x58], %i3;         \
+        ldx     [%sp + STACK_BIAS + 0x60], %i4;         \
+        ldx     [%sp + STACK_BIAS + 0x68], %i5;         \
+        ldx     [%sp + STACK_BIAS + 0x70], %i6;         \
+        ldx     [%sp + STACK_BIAS + 0x78], %i7;         \
+        restored; retry; nop; nop; nop; nop; nop; nop;  \
+        nop; nop; nop; nop; nop; nop; nop; nop;
+
+#define FILL_0_NORMAL_RTRAP                             \
+kern_rtt_fill:                                          \
+        rdpr    %cwp, %g1;                              \
+        sub     %g1, 1, %g1;                            \
+        wrpr    %g1, %cwp;                              \
+        ldx     [%sp + STACK_BIAS + 0x00], %l0;         \
+        ldx     [%sp + STACK_BIAS + 0x08], %l1;         \
+        ldx     [%sp + STACK_BIAS + 0x10], %l2;         \
+        ldx     [%sp + STACK_BIAS + 0x18], %l3;         \
+        ldx     [%sp + STACK_BIAS + 0x20], %l4;         \
+        ldx     [%sp + STACK_BIAS + 0x28], %l5;         \
+        ldx     [%sp + STACK_BIAS + 0x30], %l6;         \
+        ldx     [%sp + STACK_BIAS + 0x38], %l7;         \
+        ldx     [%sp + STACK_BIAS + 0x40], %i0;         \
+        ldx     [%sp + STACK_BIAS + 0x48], %i1;         \
+        ldx     [%sp + STACK_BIAS + 0x50], %i2;         \
+        ldx     [%sp + STACK_BIAS + 0x58], %i3;         \
+        ldx     [%sp + STACK_BIAS + 0x60], %i4;         \
+        ldx     [%sp + STACK_BIAS + 0x68], %i5;         \
+        ldx     [%sp + STACK_BIAS + 0x70], %i6;         \
+        ldx     [%sp + STACK_BIAS + 0x78], %i7;         \
+        restored;                                       \
+        add     %g1, 1, %g1;                            \
+        ba,pt   %xcc, kern_rtt_restore;                 \
+         wrpr   %g1, %cwp;                              \
+        nop; nop; nop; nop; nop;                        \
+        nop; nop; nop; nop;
+
+
+/* Normal 64bit fill */
+#define FILL_1_GENERIC(ASI)                             \
+        add     %sp, STACK_BIAS + 0x00, %g1;            \
+        ldxa    [%g1 + %g0] ASI, %l0;                   \
+        mov     0x08, %g2;                              \
+        mov     0x10, %g3;                              \
+        ldxa    [%g1 + %g2] ASI, %l1;                   \
+        mov     0x18, %g5;                              \
+        ldxa    [%g1 + %g3] ASI, %l2;                   \
+        ldxa    [%g1 + %g5] ASI, %l3;                   \
+        add     %g1, 0x20, %g1;                         \
+        ldxa    [%g1 + %g0] ASI, %l4;                   \
+        ldxa    [%g1 + %g2] ASI, %l5;                   \
+        ldxa    [%g1 + %g3] ASI, %l6;                   \
+        ldxa    [%g1 + %g5] ASI, %l7;                   \
+        add     %g1, 0x20, %g1;                         \
+        ldxa    [%g1 + %g0] ASI, %i0;                   \
+        ldxa    [%g1 + %g2] ASI, %i1;                   \
+        ldxa    [%g1 + %g3] ASI, %i2;                   \
+        ldxa    [%g1 + %g5] ASI, %i3;                   \
+        add     %g1, 0x20, %g1;                         \
+        ldxa    [%g1 + %g0] ASI, %i4;                   \
+        ldxa    [%g1 + %g2] ASI, %i5;                   \
+        ldxa    [%g1 + %g3] ASI, %i6;                   \
+        ldxa    [%g1 + %g5] ASI, %i7;                   \
+        restored;                                       \
+        retry; nop; nop; nop; nop;                      \
+        b,a,pt  %xcc, fill_fixup_dax;                   \
+        b,a,pt  %xcc, fill_fixup_mna;                   \
+        b,a,pt  %xcc, fill_fixup;
+
+#define FILL_1_GENERIC_RTRAP                            \
+user_rtt_fill_64bit:                                    \
+        ldxa    [%sp + STACK_BIAS + 0x00] %asi, %l0;    \
+        ldxa    [%sp + STACK_BIAS + 0x08] %asi, %l1;    \
+        ldxa    [%sp + STACK_BIAS + 0x10] %asi, %l2;    \
+        ldxa    [%sp + STACK_BIAS + 0x18] %asi, %l3;    \
+        ldxa    [%sp + STACK_BIAS + 0x20] %asi, %l4;    \
+        ldxa    [%sp + STACK_BIAS + 0x28] %asi, %l5;    \
+        ldxa    [%sp + STACK_BIAS + 0x30] %asi, %l6;    \
+        ldxa    [%sp + STACK_BIAS + 0x38] %asi, %l7;    \
+        ldxa    [%sp + STACK_BIAS + 0x40] %asi, %i0;    \
+        ldxa    [%sp + STACK_BIAS + 0x48] %asi, %i1;    \
+        ldxa    [%sp + STACK_BIAS + 0x50] %asi, %i2;    \
+        ldxa    [%sp + STACK_BIAS + 0x58] %asi, %i3;    \
+        ldxa    [%sp + STACK_BIAS + 0x60] %asi, %i4;    \
+        ldxa    [%sp + STACK_BIAS + 0x68] %asi, %i5;    \
+        ldxa    [%sp + STACK_BIAS + 0x70] %asi, %i6;    \
+        ldxa    [%sp + STACK_BIAS + 0x78] %asi, %i7;    \
+        ba,pt   %xcc, user_rtt_pre_restore;             \
+         restored;                                      \
+        nop; nop; nop; nop; nop; nop;                   \
+        nop; nop; nop; nop; nop;                        \
+        ba,a,pt %xcc, user_rtt_fill_fixup;              \
+        ba,a,pt %xcc, user_rtt_fill_fixup;              \
+        ba,a,pt %xcc, user_rtt_fill_fixup;
+
+
+/* Normal 32bit fill */
+#define FILL_2_GENERIC(ASI)                             \
+        srl     %sp, 0, %sp;                            \
+        lduwa   [%sp + %g0] ASI, %l0;                   \
+        mov     0x04, %g2;                              \
+        mov     0x08, %g3;                              \
+        lduwa   [%sp + %g2] ASI, %l1;                   \
+        mov     0x0c, %g5;                              \
+        lduwa   [%sp + %g3] ASI, %l2;                   \
+        lduwa   [%sp + %g5] ASI, %l3;                   \
+        add     %sp, 0x10, %g1;                         \
+        lduwa   [%g1 + %g0] ASI, %l4;                   \
+        lduwa   [%g1 + %g2] ASI, %l5;                   \
+        lduwa   [%g1 + %g3] ASI, %l6;                   \
+        lduwa   [%g1 + %g5] ASI, %l7;                   \
+        add     %g1, 0x10, %g1;                         \
+        lduwa   [%g1 + %g0] ASI, %i0;                   \
+        lduwa   [%g1 + %g2] ASI, %i1;                   \
+        lduwa   [%g1 + %g3] ASI, %i2;                   \
+        lduwa   [%g1 + %g5] ASI, %i3;                   \
+        add     %g1, 0x10, %g1;                         \
+        lduwa   [%g1 + %g0] ASI, %i4;                   \
+        lduwa   [%g1 + %g2] ASI, %i5;                   \
+        lduwa   [%g1 + %g3] ASI, %i6;                   \
+        lduwa   [%g1 + %g5] ASI, %i7;                   \
+        restored;                                       \
+        retry; nop; nop; nop; nop;                      \
+        b,a,pt  %xcc, fill_fixup_dax;                   \
+        b,a,pt  %xcc, fill_fixup_mna;                   \
+        b,a,pt  %xcc, fill_fixup;
+
+#define FILL_2_GENERIC_RTRAP                            \
+user_rtt_fill_32bit:                                    \
+        srl     %sp, 0, %sp;                            \
+        lduwa   [%sp + 0x00] %asi, %l0;                 \
+        lduwa   [%sp + 0x04] %asi, %l1;                 \
+        lduwa   [%sp + 0x08] %asi, %l2;                 \
+        lduwa   [%sp + 0x0c] %asi, %l3;                 \
+        lduwa   [%sp + 0x10] %asi, %l4;                 \
+        lduwa   [%sp + 0x14] %asi, %l5;                 \
+        lduwa   [%sp + 0x18] %asi, %l6;                 \
+        lduwa   [%sp + 0x1c] %asi, %l7;                 \
+        lduwa   [%sp + 0x20] %asi, %i0;                 \
+        lduwa   [%sp + 0x24] %asi, %i1;                 \
+        lduwa   [%sp + 0x28] %asi, %i2;                 \
+        lduwa   [%sp + 0x2c] %asi, %i3;                 \
+        lduwa   [%sp + 0x30] %asi, %i4;                 \
+        lduwa   [%sp + 0x34] %asi, %i5;                 \
+        lduwa   [%sp + 0x38] %asi, %i6;                 \
+        lduwa   [%sp + 0x3c] %asi, %i7;                 \
+        ba,pt   %xcc, user_rtt_pre_restore;             \
+         restored;                                      \
+        nop; nop; nop; nop; nop;                        \
+        nop; nop; nop; nop; nop;                        \
+        ba,a,pt %xcc, user_rtt_fill_fixup;              \
+        ba,a,pt %xcc, user_rtt_fill_fixup;              \
+        ba,a,pt %xcc, user_rtt_fill_fixup;
+
+
+#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP)
+#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP)
+#define FILL_3_NORMAL FILL_0_NORMAL
+#define FILL_4_NORMAL FILL_0_NORMAL
+#define FILL_5_NORMAL FILL_0_NORMAL
+#define FILL_6_NORMAL FILL_0_NORMAL
+#define FILL_7_NORMAL FILL_0_NORMAL
+
+#define FILL_0_OTHER FILL_0_NORMAL
+#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS)
+#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS)
+#define FILL_3_OTHER FILL_3_NORMAL
+#define FILL_4_OTHER FILL_4_NORMAL
+#define FILL_5_OTHER FILL_5_NORMAL
+#define FILL_6_OTHER FILL_6_NORMAL
+#define FILL_7_OTHER FILL_7_NORMAL
+
+#endif /* !(_SPARC64_TTABLE_H) */
diff --git a/arch/sparc/include/asm/turbosparc.h b/arch/sparc/include/asm/turbosparc.h
new file mode 100644
index 000000000000..17c73282db0a
--- /dev/null
+++ b/arch/sparc/include/asm/turbosparc.h
@@ -0,0 +1,125 @@
+/*
+ * turbosparc.h:  Defines specific to the TurboSparc module.
+ *            This is SRMMU stuff.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_TURBOSPARC_H
+#define _SPARC_TURBOSPARC_H
+
+#include <asm/asi.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for TurboSparc modules.
+ *
+ * -------------------------------------------------------------------
+ * |impl-vers| RSV| PMC |PE|PC| RSV |BM| RFR |IC|DC|PSO|RSV|ICS|NF|ME|
+ * -------------------------------------------------------------------
+ *  31    24 23-21 20-19 18 17 16-15 14 13-10  9  8  7  6-3   2  1  0
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the TurboSparc is in boot-mode or not.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu TurboSparc split I/D caches.
+ *
+ * ICS: ICache Snooping -- 0 = disable, 1 = enable snooping of icache
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define TURBOSPARC_MMUENABLE    0x00000001
+#define TURBOSPARC_NOFAULT      0x00000002
+#define TURBOSPARC_ICSNOOP      0x00000004
+#define TURBOSPARC_PSO          0x00000080
+#define TURBOSPARC_DCENABLE     0x00000100   /* Enable data cache */
+#define TURBOSPARC_ICENABLE     0x00000200   /* Enable instruction cache */
+#define TURBOSPARC_BMODE        0x00004000   
+#define TURBOSPARC_PARITYODD    0x00020000   /* Parity odd, if enabled */
+#define TURBOSPARC_PCENABLE     0x00040000   /* Enable parity checking */
+
+/* Bits in the CPU configuration register for TurboSparc modules.
+ *
+ * -------------------------------------------------------
+ * |IOClk|SNP|AXClk| RAH |  WS |  RSV  |SBC|WT|uS2|SE|SCC|
+ * -------------------------------------------------------
+ *    31   30 29-28 27-26 25-23   22-8  7-6  5  4   3 2-0
+ *
+ */
+
+#define TURBOSPARC_SCENABLE 0x00000008   /* Secondary cache enable */
+#define TURBOSPARC_uS2      0x00000010   /* Swift compatibility mode */
+#define TURBOSPARC_WTENABLE 0x00000020   /* Write thru for dcache */
+#define TURBOSPARC_SNENABLE 0x40000000   /* DVMA snoop enable */
+
+#ifndef __ASSEMBLY__
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void turbosparc_inv_insn_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" (addr), "i" (ASI_M_TXTC_TAG)
+                             : "memory");
+}
+
+/* Bits [13:5] select one of 512 data cache tags */
+static inline void turbosparc_inv_data_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" (addr), "i" (ASI_M_DATAC_TAG)
+                             : "memory");
+}
+
+static inline void turbosparc_flush_icache(void)
+{
+        unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                turbosparc_inv_insn_tag(addr);
+}
+
+static inline void turbosparc_flush_dcache(void)
+{
+        unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                turbosparc_inv_data_tag(addr);
+}
+
+static inline void turbosparc_idflash_clear(void)
+{
+        unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20) {
+                turbosparc_inv_insn_tag(addr);
+                turbosparc_inv_data_tag(addr);
+        }
+}
+
+static inline void turbosparc_set_ccreg(unsigned long regval)
+{
+        __asm__ __volatile__("sta %0, [%1] %2\n\t"
+                             : /* no outputs */
+                             : "r" (regval), "r" (0x600), "i" (ASI_M_MMUREGS)
+                             : "memory");
+}
+
+static inline unsigned long turbosparc_get_ccreg(void)
+{
+        unsigned long regval;
+
+        __asm__ __volatile__("lda [%1] %2, %0\n\t"
+                             : "=r" (regval)
+                             : "r" (0x600), "i" (ASI_M_MMUREGS));
+        return regval;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_TURBOSPARC_H) */
diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
new file mode 100644
index 000000000000..8c28fde5eaa2
--- /dev/null
+++ b/arch/sparc/include/asm/types.h
@@ -0,0 +1,62 @@
+#ifndef _SPARC_TYPES_H
+#define _SPARC_TYPES_H
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+
+/*** SPARC 64 bit ***/
+#include <asm-generic/int-l64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 64
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses come in generic and 64-bit flavours.  */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#else
+
+/*** SPARC 32 bit ***/
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(__sparc__) && defined(__arch64__) */
+
+#endif /* defined(_SPARC_TYPES_H) */
diff --git a/arch/sparc/include/asm/uaccess.h b/arch/sparc/include/asm/uaccess.h
new file mode 100644
index 000000000000..e88fbe5c0457
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UACCESS_H
+#define ___ASM_SPARC_UACCESS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/uaccess_64.h>
+#else
+#include <asm/uaccess_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
new file mode 100644
index 000000000000..47d5619d43fa
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -0,0 +1,336 @@
+/*
+ * uaccess.h: User space memore access functions.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <asm/vac-ops.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* Sparc is not segmented, however we need to be able to fool access_ok()
+ * when doing system calls from kernel mode legitimately.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS   ((mm_segment_t) { 0 })
+#define USER_DS     ((mm_segment_t) { -1 })
+
+#define VERIFY_READ     0
+#define VERIFY_WRITE    1
+
+#define get_ds()        (KERNEL_DS)
+#define get_fs()        (current->thread.current_ds)
+#define set_fs(val)     ((current->thread.current_ds) = (val))
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test
+ * can be fairly lightweight.
+ * No one can read/write anything from userland in the kernel space by setting
+ * large size and address near to PAGE_OFFSET - a fault will break his intentions.
+ */
+#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; })
+#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size)))
+#define access_ok(type, addr, size)                                     \
+        ({ (void)(type); __access_ok((unsigned long)(addr), size); })
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ *
+ * There is a special way how to put a range of potentially faulting
+ * insns (like twenty ldd/std's with now intervening other instructions)
+ * You specify address of first in insn and 0 in fixup and in the next
+ * exception_table_entry you specify last potentially faulting insn + 1
+ * and in fixup the routine which should handle the fault.
+ * That fixup code will get
+ * (faulting_insn_address - first_insn_in_the_range_address)/4
+ * in %g2 (ie. index of the faulting instruction in the range).
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2);
+
+extern void __ret_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct __user *)(x))
+
+#define __put_user_check(x,addr,size) ({ \
+register int __pu_ret; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} } else { __pu_ret = -EFAULT; } __pu_ret; })
+
+#define __put_user_nocheck(x,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_asm(x,size,addr,ret)                                 \
+__asm__ __volatile__(                                                   \
+        "/* Put user asm, inline. */\n"                                 \
+"1:\t"  "st"#size " %1, %2\n\t"                                         \
+        "clr    %0\n"                                                   \
+"2:\n\n\t"                                                              \
+        ".section .fixup,#alloc,#execinstr\n\t"                         \
+        ".align 4\n"                                                    \
+"3:\n\t"                                                                \
+        "b      2b\n\t"                                                 \
+        " mov   %3, %0\n\t"                                             \
+        ".previous\n\n\t"                                               \
+        ".section __ex_table,#alloc\n\t"                                \
+        ".align 4\n\t"                                                  \
+        ".word  1b, 3b\n\t"                                             \
+        ".previous\n\n\t"                                               \
+       : "=&r" (ret) : "r" (x), "m" (*__m(addr)),                       \
+         "i" (-EFAULT))
+
+extern int __put_user_bad(void);
+
+#define __get_user_check(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_check_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; } else return retval; })
+
+#define __get_user_nocheck(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret)                                 \
+__asm__ __volatile__(                                                   \
+        "/* Get user asm, inline. */\n"                                 \
+"1:\t"  "ld"#size " %2, %1\n\t"                                         \
+        "clr    %0\n"                                                   \
+"2:\n\n\t"                                                              \
+        ".section .fixup,#alloc,#execinstr\n\t"                         \
+        ".align 4\n"                                                    \
+"3:\n\t"                                                                \
+        "clr    %1\n\t"                                                 \
+        "b      2b\n\t"                                                 \
+        " mov   %3, %0\n\n\t"                                           \
+        ".previous\n\t"                                                 \
+        ".section __ex_table,#alloc\n\t"                                \
+        ".align 4\n\t"                                                  \
+        ".word  1b, 3b\n\n\t"                                           \
+        ".previous\n\t"                                                 \
+       : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)),                     \
+         "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval)                          \
+if (__builtin_constant_p(retval) && retval == -EFAULT)                  \
+__asm__ __volatile__(                                                   \
+        "/* Get user asm ret, inline. */\n"                             \
+"1:\t"  "ld"#size " %1, %0\n\n\t"                                       \
+        ".section __ex_table,#alloc\n\t"                                \
+        ".align 4\n\t"                                                  \
+        ".word  1b,__ret_efault\n\n\t"                                  \
+        ".previous\n\t"                                                 \
+       : "=&r" (x) : "m" (*__m(addr)));                                 \
+else                                                                    \
+__asm__ __volatile__(                                                   \
+        "/* Get user asm ret, inline. */\n"                             \
+"1:\t"  "ld"#size " %1, %0\n\n\t"                                       \
+        ".section .fixup,#alloc,#execinstr\n\t"                         \
+        ".align 4\n"                                                    \
+"3:\n\t"                                                                \
+        "ret\n\t"                                                       \
+        " restore %%g0, %2, %%o0\n\n\t"                                 \
+        ".previous\n\t"                                                 \
+        ".section __ex_table,#alloc\n\t"                                \
+        ".align 4\n\t"                                                  \
+        ".word  1b, 3b\n\n\t"                                           \
+        ".previous\n\t"                                                 \
+       : "=&r" (x) : "m" (*__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size);
+
+static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+        if (n && __access_ok((unsigned long) to, n))
+                return __copy_user(to, (__force void __user *) from, n);
+        else
+                return n;
+}
+
+static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+        return __copy_user(to, (__force void __user *) from, n);
+}
+
+static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+        if (n && __access_ok((unsigned long) from, n))
+                return __copy_user((__force void __user *) to, from, n);
+        else
+                return n;
+}
+
+static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+        return __copy_user((__force void __user *) to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long __clear_user(void __user *addr, unsigned long size)
+{
+        unsigned long ret;
+
+        __asm__ __volatile__ (
+                ".section __ex_table,#alloc\n\t"
+                ".align 4\n\t"
+                ".word 1f,3\n\t"
+                ".previous\n\t"
+                "mov %2, %%o1\n"
+                "1:\n\t"
+                "call __bzero\n\t"
+                " mov %1, %%o0\n\t"
+                "mov %%o0, %0\n"
+                : "=r" (ret) : "r" (addr), "r" (size) :
+                "o0", "o1", "o2", "o3", "o4", "o5", "o7",
+                "g1", "g2", "g3", "g4", "g5", "g7", "cc");
+
+        return ret;
+}
+
+static inline unsigned long clear_user(void __user *addr, unsigned long n)
+{
+        if (n && __access_ok((unsigned long) addr, n))
+                return __clear_user(addr, n);
+        else
+                return n;
+}
+
+extern long __strncpy_from_user(char *dest, const char __user *src, long count);
+
+static inline long strncpy_from_user(char *dest, const char __user *src, long count)
+{
+        if (__access_ok((unsigned long) src, count))
+                return __strncpy_from_user(dest, src, count);
+        else
+                return -EFAULT;
+}
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+static inline long strlen_user(const char __user *str)
+{
+        if (!access_ok(VERIFY_READ, str, 0))
+                return 0;
+        else
+                return __strlen_user(str);
+}
+
+static inline long strnlen_user(const char __user *str, long len)
+{
+        if (!access_ok(VERIFY_READ, str, 0))
+                return 0;
+        else
+                return __strnlen_user(str, len);
+}
+
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
new file mode 100644
index 000000000000..296ef30e05c8
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -0,0 +1,273 @@
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <asm/asi.h>
+#include <asm/system.h>
+#include <asm/spitfire.h>
+#include <asm-generic/uaccess.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Sparc64 is segmented, though more like the M68K than the I386.
+ * We use the secondary ASI to address user memory, which references a
+ * completely different VM map, thus there is zero chance of the user
+ * doing something queer and tricking us into poking kernel memory.
+ *
+ * What is left here is basically what is needed for the other parts of
+ * the kernel that expect to be able to manipulate, erum, "segments".
+ * Or perhaps more properly, permissions.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS   ((mm_segment_t) { ASI_P })
+#define USER_DS     ((mm_segment_t) { ASI_AIUS })       /* har har har */
+
+#define VERIFY_READ     0
+#define VERIFY_WRITE    1
+
+#define get_fs() ((mm_segment_t) { get_thread_current_ds() })
+#define get_ds() (KERNEL_DS)
+
+#define segment_eq(a,b)  ((a).seg == (b).seg)
+
+#define set_fs(val)                                                             \
+do {                                                                            \
+        set_thread_current_ds((val).seg);                                       \
+        __asm__ __volatile__ ("wr %%g0, %0, %%asi" : : "r" ((val).seg));        \
+} while(0)
+
+static inline int __access_ok(const void __user * addr, unsigned long size)
+{
+        return 1;
+}
+
+static inline int access_ok(int type, const void __user * addr, unsigned long size)
+{
+        return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+        unsigned int insn, fixup;
+};
+
+extern void __ret_efault(void);
+extern void __retl_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_nocheck((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_nocheck((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+#define __put_user(x,ptr) put_user(x,ptr)
+#define __get_user(x,ptr) get_user(x,ptr)
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct *)(x))
+
+#define __put_user_nocheck(data,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(data,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(data,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(data,w,addr,__pu_ret); break; \
+case 8: __put_user_asm(data,x,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_asm(x,size,addr,ret)                                 \
+__asm__ __volatile__(                                                   \
+        "/* Put user asm, inline. */\n"                                 \
+"1:\t"  "st"#size "a %1, [%2] %%asi\n\t"                                \
+        "clr    %0\n"                                                   \
+"2:\n\n\t"                                                              \
+        ".section .fixup,#alloc,#execinstr\n\t"                         \
+        ".align 4\n"                                                    \
+"3:\n\t"                                                                \
+        "sethi  %%hi(2b), %0\n\t"                                       \
+        "jmpl   %0 + %%lo(2b), %%g0\n\t"                                \
+        " mov   %3, %0\n\n\t"                                           \
+        ".previous\n\t"                                                 \
+        ".section __ex_table,\"a\"\n\t"                                 \
+        ".align 4\n\t"                                                  \
+        ".word  1b, 3b\n\t"                                             \
+        ".previous\n\n\t"                                               \
+       : "=r" (ret) : "r" (x), "r" (__m(addr)),                         \
+         "i" (-EFAULT))
+
+extern int __put_user_bad(void);
+
+#define __get_user_nocheck(data,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,uw,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,x,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} data = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(data,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,uw,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,x,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} data = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret)                                 \
+__asm__ __volatile__(                                                   \
+        "/* Get user asm, inline. */\n"                                 \
+"1:\t"  "ld"#size "a [%2] %%asi, %1\n\t"                                \
+        "clr    %0\n"                                                   \
+"2:\n\n\t"                                                              \
+        ".section .fixup,#alloc,#execinstr\n\t"                         \
+        ".align 4\n"                                                    \
+"3:\n\t"                                                                \
+        "sethi  %%hi(2b), %0\n\t"                                       \
+        "clr    %1\n\t"                                                 \
+        "jmpl   %0 + %%lo(2b), %%g0\n\t"                                \
+        " mov   %3, %0\n\n\t"                                           \
+        ".previous\n\t"                                                 \
+        ".section __ex_table,\"a\"\n\t"                                 \
+        ".align 4\n\t"                                                  \
+        ".word  1b, 3b\n\n\t"                                           \
+        ".previous\n\t"                                                 \
+       : "=r" (ret), "=r" (x) : "r" (__m(addr)),                        \
+         "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval)                          \
+if (__builtin_constant_p(retval) && retval == -EFAULT)                  \
+__asm__ __volatile__(                                                   \
+        "/* Get user asm ret, inline. */\n"                             \
+"1:\t"  "ld"#size "a [%1] %%asi, %0\n\n\t"                              \
+        ".section __ex_table,\"a\"\n\t"                                 \
+        ".align 4\n\t"                                                  \
+        ".word  1b,__ret_efault\n\n\t"                                  \
+        ".previous\n\t"                                                 \
+       : "=r" (x) : "r" (__m(addr)));                                   \
+else                                                                    \
+__asm__ __volatile__(                                                   \
+        "/* Get user asm ret, inline. */\n"                             \
+"1:\t"  "ld"#size "a [%1] %%asi, %0\n\n\t"                              \
+        ".section .fixup,#alloc,#execinstr\n\t"                         \
+        ".align 4\n"                                                    \
+"3:\n\t"                                                                \
+        "ret\n\t"                                                       \
+        " restore %%g0, %2, %%o0\n\n\t"                                 \
+        ".previous\n\t"                                                 \
+        ".section __ex_table,\"a\"\n\t"                                 \
+        ".align 4\n\t"                                                  \
+        ".word  1b, 3b\n\n\t"                                           \
+        ".previous\n\t"                                                 \
+       : "=r" (x) : "r" (__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __must_check ___copy_from_user(void *to,
+                                                    const void __user *from,
+                                                    unsigned long size);
+extern unsigned long copy_from_user_fixup(void *to, const void __user *from,
+                                          unsigned long size);
+static inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long size)
+{
+        unsigned long ret = ___copy_from_user(to, from, size);
+
+        if (unlikely(ret))
+                ret = copy_from_user_fixup(to, from, size);
+        return ret;
+}
+#define __copy_from_user copy_from_user
+
+extern unsigned long __must_check ___copy_to_user(void __user *to,
+                                                  const void *from,
+                                                  unsigned long size);
+extern unsigned long copy_to_user_fixup(void __user *to, const void *from,
+                                        unsigned long size);
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long size)
+{
+        unsigned long ret = ___copy_to_user(to, from, size);
+
+        if (unlikely(ret))
+                ret = copy_to_user_fixup(to, from, size);
+        return ret;
+}
+#define __copy_to_user copy_to_user
+
+extern unsigned long __must_check ___copy_in_user(void __user *to,
+                                                  const void __user *from,
+                                                  unsigned long size);
+extern unsigned long copy_in_user_fixup(void __user *to, void __user *from,
+                                        unsigned long size);
+static inline unsigned long __must_check
+copy_in_user(void __user *to, void __user *from, unsigned long size)
+{
+        unsigned long ret = ___copy_in_user(to, from, size);
+
+        if (unlikely(ret))
+                ret = copy_in_user_fixup(to, from, size);
+        return ret;
+}
+#define __copy_in_user copy_in_user
+
+extern unsigned long __must_check __clear_user(void __user *, unsigned long);
+
+#define clear_user __clear_user
+
+extern long __must_check __strncpy_from_user(char *dest, const char __user *src, long count);
+
+#define strncpy_from_user __strncpy_from_user
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+#define strlen_user __strlen_user
+#define strnlen_user __strnlen_user
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/sparc/include/asm/uctx.h b/arch/sparc/include/asm/uctx.h
new file mode 100644
index 000000000000..dc937c75ffdd
--- /dev/null
+++ b/arch/sparc/include/asm/uctx.h
@@ -0,0 +1,71 @@
+/*
+ * uctx.h: Sparc64 {set,get}context() register state layouts.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_UCTX_H
+#define __SPARC64_UCTX_H
+
+#define MC_TSTATE       0
+#define MC_PC           1
+#define MC_NPC          2
+#define MC_Y            3
+#define MC_G1           4
+#define MC_G2           5
+#define MC_G3           6
+#define MC_G4           7
+#define MC_G5           8
+#define MC_G6           9
+#define MC_G7           10
+#define MC_O0           11
+#define MC_O1           12
+#define MC_O2           13
+#define MC_O3           14
+#define MC_O4           15
+#define MC_O5           16
+#define MC_O6           17
+#define MC_O7           18
+#define MC_NGREG        19
+
+typedef unsigned long mc_greg_t;
+typedef mc_greg_t mc_gregset_t[MC_NGREG];
+
+#define MC_MAXFPQ       16
+struct mc_fq {
+        unsigned long   *mcfq_addr;
+        unsigned int    mcfq_insn;
+};
+
+struct mc_fpu {
+        union {
+                unsigned int    sregs[32];
+                unsigned long   dregs[32];
+                long double     qregs[16];
+        } mcfpu_fregs;
+        unsigned long   mcfpu_fsr;
+        unsigned long   mcfpu_fprs;
+        unsigned long   mcfpu_gsr;
+        struct mc_fq    *mcfpu_fq;
+        unsigned char   mcfpu_qcnt;
+        unsigned char   mcfpu_qentsz;
+        unsigned char   mcfpu_enab;
+};
+typedef struct mc_fpu mc_fpu_t;
+
+typedef struct {
+        mc_gregset_t    mc_gregs;
+        mc_greg_t       mc_fp;
+        mc_greg_t       mc_i7;
+        mc_fpu_t        mc_fpregs;
+} mcontext_t;
+
+struct ucontext {
+        struct ucontext         *uc_link;
+        unsigned long           uc_flags;
+        sigset_t                uc_sigmask;
+        mcontext_t              uc_mcontext;
+};
+typedef struct ucontext ucontext_t;
+
+#endif /* __SPARC64_UCTX_H */
diff --git a/arch/sparc/include/asm/unaligned.h b/arch/sparc/include/asm/unaligned.h
new file mode 100644
index 000000000000..11d2d5fb5902
--- /dev/null
+++ b/arch/sparc/include/asm/unaligned.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_SPARC_UNALIGNED_H
+#define _ASM_SPARC_UNALIGNED_H
+
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+#define get_unaligned   __get_unaligned_be
+#define put_unaligned   __put_unaligned_be
+
+#endif /* _ASM_SPARC_UNALIGNED_H */
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
new file mode 100644
index 000000000000..4207fb362da0
--- /dev/null
+++ b/arch/sparc/include/asm/unistd.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UNISTD_H
+#define ___ASM_SPARC_UNISTD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/unistd_64.h>
+#else
+#include <asm/unistd_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/unistd_32.h b/arch/sparc/include/asm/unistd_32.h
new file mode 100644
index 000000000000..648643a9f139
--- /dev/null
+++ b/arch/sparc/include/asm/unistd_32.h
@@ -0,0 +1,384 @@
+#ifndef _SPARC_UNISTD_H
+#define _SPARC_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific                              */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown               13 /* Common                                      */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget              21 /* Linux Specific                              */
+#define __NR_capset              22 /* Linux Specific                              */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+#define __NR_vmsplice            25 /* ENOSYS under SunOS                          */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack         28 /* Common                                      */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+#define __NR_lchown32            31 /* Linux sparc32 specific                      */
+#define __NR_fchown32            32 /* Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+#define __NR_chown32             35 /* Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile            39 /* Linux Specific                              */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+#define __NR_getuid32            44 /* Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+/* #define __NR_memory_ordering  52    Linux sparc64 specific                      */
+#define __NR_getgid32            53 /* Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+#define __NR_mmap2               56 /* Linux sparc32 Specific                      */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64             63 /* Linux Specific                              */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+#define __NR_geteuid32           69 /* Linux sparc32, sbrk under SunOS             */
+#define __NR_getegid32           70 /* Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+#define __NR_setreuid32          72 /* Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+#define __NR_truncate64          77 /* Linux sparc32 Specific                      */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+#define __NR_setgroups32         82 /* Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+#define __NR_ftruncate64         84 /* Linux sparc32 Specific                      */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+#define __NR_setuid32            87 /* Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+#define __NR_setgid32            89 /* Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+#define __NR_setfsuid32          91 /* Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+#define __NR_setfsgid32          94 /* Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid32        108 /* Linux Specific, sigvec under SunOS          */
+#define __NR_getresuid32        109 /* Linux Specific, sigblock under SunOS        */
+#define __NR_setresgid32        110 /* Linux Specific, sigsetmask under SunOS      */
+#define __NR_getresgid32        111 /* Linux Specific, sigpause under SunOS        */
+#define __NR_setregid32         112 /* Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+#define __NR_getgroups32        115 /* Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd             119 /* Linux Specific                              */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64            132 /* Linux Specific                              */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64             139 /* Linux Specific                              */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit          144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root         146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl              147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read     148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write    149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+#define __NR_inotify_init       151 /* Linux specific                              */
+#define __NR_inotify_add_watch  152 /* Linux specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64         154 /* Linux specific                              */
+#define __NR_fcntl64            155 /* Linux sparc32 Specific                      */
+#define __NR_inotify_rm_watch   156 /* Linux specific                              */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+/* #define __NR_utrap_install   164    Linux sparc64 specific                      */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module       184 /* Linux Specific                              */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group         188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+#define __NR_ioprio_set         196 /* Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+#define __NR_ioprio_get         218 /* Linux Specific                              */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#define __NR_time               231 /* Linux Specific                              */
+#define __NR_splice             232 /* Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_sync_file_range    255
+#define __NR_clock_settime      256
+#define __NR_clock_gettime      257
+#define __NR_clock_getres       258
+#define __NR_clock_nanosleep    259
+#define __NR_sched_getaffinity  260
+#define __NR_sched_setaffinity  261
+#define __NR_timer_settime      262
+#define __NR_timer_gettime      263
+#define __NR_timer_getoverrun   264
+#define __NR_timer_delete       265
+#define __NR_timer_create       266
+/* #define __NR_vserver         267 Reserved for VSERVER */
+#define __NR_io_setup           268
+#define __NR_io_destroy         269
+#define __NR_io_submit          270
+#define __NR_io_cancel          271
+#define __NR_io_getevents       272
+#define __NR_mq_open            273
+#define __NR_mq_unlink          274
+#define __NR_mq_timedsend       275
+#define __NR_mq_timedreceive    276
+#define __NR_mq_notify          277
+#define __NR_mq_getsetattr      278
+#define __NR_waitid             279
+#define __NR_tee                280
+#define __NR_add_key            281
+#define __NR_request_key        282
+#define __NR_keyctl             283
+#define __NR_openat             284
+#define __NR_mkdirat            285
+#define __NR_mknodat            286
+#define __NR_fchownat           287
+#define __NR_futimesat          288
+#define __NR_fstatat64          289
+#define __NR_unlinkat           290
+#define __NR_renameat           291
+#define __NR_linkat             292
+#define __NR_symlinkat          293
+#define __NR_readlinkat         294
+#define __NR_fchmodat           295
+#define __NR_faccessat          296
+#define __NR_pselect6           297
+#define __NR_ppoll              298
+#define __NR_unshare            299
+#define __NR_set_robust_list    300
+#define __NR_get_robust_list    301
+#define __NR_migrate_pages      302
+#define __NR_mbind              303
+#define __NR_get_mempolicy      304
+#define __NR_set_mempolicy      305
+#define __NR_kexec_load         306
+#define __NR_move_pages         307
+#define __NR_getcpu             308
+#define __NR_epoll_pwait        309
+#define __NR_utimensat          310
+#define __NR_signalfd           311
+#define __NR_timerfd_create     312
+#define __NR_eventfd            313
+#define __NR_fallocate          314
+#define __NR_timerfd_settime    315
+#define __NR_timerfd_gettime    316
+#define __NR_signalfd4          317
+#define __NR_eventfd2           318
+#define __NR_epoll_create1      319
+#define __NR_dup3               320
+#define __NR_pipe2              321
+#define __NR_inotify_init1      322
+
+#define NR_SYSCALLS             323
+
+/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
+ * it never had the plain ones and there is no value to adding those
+ * old versions into the syscall table.
+ */
+#define __IGNORE_setresuid
+#define __IGNORE_getresuid
+#define __IGNORE_setresgid
+#define __IGNORE_getresgid
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC_UNISTD_H */
diff --git a/arch/sparc/include/asm/unistd_64.h b/arch/sparc/include/asm/unistd_64.h
new file mode 100644
index 000000000000..c5cc0e052321
--- /dev/null
+++ b/arch/sparc/include/asm/unistd_64.h
@@ -0,0 +1,379 @@
+#ifndef _SPARC64_UNISTD_H
+#define _SPARC64_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific                              */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown               13 /* Common                                      */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget              21 /* Linux Specific                              */
+#define __NR_capset              22 /* Linux Specific                              */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+#define __NR_vmsplice            25 /* ENOSYS under SunOS                          */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack         28 /* Common                                      */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+/* #define __NR_lchown32         31    Linux sparc32 specific                      */
+/* #define __NR_fchown32         32    Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+/* #define __NR_chown32          35    Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile            39 /* Linux Specific                              */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+/* #define __NR_getuid32         44    Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+#define __NR_memory_ordering     52 /* Linux Specific                              */
+/* #define __NR_getgid32         53    Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+/* #define __NR_mmap2            56    Linux sparc32 Specific                      */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64             63 /* Linux Specific                              */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+/* #define __NR_geteuid32        69    Linux sparc32, sbrk under SunOS             */
+/* #define __NR_getegid32        70    Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+/* #define __NR_setreuid32       72    Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+/* #define __NR_truncate64       77    Linux sparc32 Specific                      */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+/* #define __NR_setgroups32      82    Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+/* #define __NR_ftruncate64      84    Linux sparc32 Specific                      */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+/* #define __NR_setuid32         87    Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+/* #define __NR_setgid32         89    Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+/* #define __NR_setfsuid32       91    Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+/* #define __NR_setfsgid32       94    Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid          108 /* Linux Specific, sigvec under SunOS          */
+#define __NR_getresuid          109 /* Linux Specific, sigblock under SunOS        */
+#define __NR_setresgid          110 /* Linux Specific, sigsetmask under SunOS      */
+#define __NR_getresgid          111 /* Linux Specific, sigpause under SunOS        */
+/* #define __NR_setregid32       75    Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+/* #define __NR_getgroups32     115    Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd             119 /* Linux Specific                              */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64            132 /* Linux Specific                              */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64             139 /* Linux Specific                              */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit          144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root         146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl              147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read     148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write    149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+#define __NR_inotify_init       151 /* Linux specific                              */
+#define __NR_inotify_add_watch  152 /* Linux specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64         154 /* Linux specific                              */
+/* #define __NR_fcntl64         155    Linux sparc32 Specific                      */
+#define __NR_inotify_rm_watch   156 /* Linux specific                              */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+#define __NR_utrap_install      164 /* SYSV ABI/v9 required                        */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module       184 /* Linux Specific                              */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group         188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+#define __NR_ioprio_set         196 /* Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+#define __NR_ioprio_get         218 /* Linux Specific                              */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#ifdef __KERNEL__
+#define __NR_time               231 /* Linux sparc32                               */
+#endif
+#define __NR_splice             232 /* Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_sync_file_range    255
+#define __NR_clock_settime      256
+#define __NR_clock_gettime      257
+#define __NR_clock_getres       258
+#define __NR_clock_nanosleep    259
+#define __NR_sched_getaffinity  260
+#define __NR_sched_setaffinity  261
+#define __NR_timer_settime      262
+#define __NR_timer_gettime      263
+#define __NR_timer_getoverrun   264
+#define __NR_timer_delete       265
+#define __NR_timer_create       266
+/* #define __NR_vserver         267 Reserved for VSERVER */
+#define __NR_io_setup           268
+#define __NR_io_destroy         269
+#define __NR_io_submit          270
+#define __NR_io_cancel          271
+#define __NR_io_getevents       272
+#define __NR_mq_open            273
+#define __NR_mq_unlink          274
+#define __NR_mq_timedsend       275
+#define __NR_mq_timedreceive    276
+#define __NR_mq_notify          277
+#define __NR_mq_getsetattr      278
+#define __NR_waitid             279
+#define __NR_tee                280
+#define __NR_add_key            281
+#define __NR_request_key        282
+#define __NR_keyctl             283
+#define __NR_openat             284
+#define __NR_mkdirat            285
+#define __NR_mknodat            286
+#define __NR_fchownat           287
+#define __NR_futimesat          288
+#define __NR_fstatat64          289
+#define __NR_unlinkat           290
+#define __NR_renameat           291
+#define __NR_linkat             292
+#define __NR_symlinkat          293
+#define __NR_readlinkat         294
+#define __NR_fchmodat           295
+#define __NR_faccessat          296
+#define __NR_pselect6           297
+#define __NR_ppoll              298
+#define __NR_unshare            299
+#define __NR_set_robust_list    300
+#define __NR_get_robust_list    301
+#define __NR_migrate_pages      302
+#define __NR_mbind              303
+#define __NR_get_mempolicy      304
+#define __NR_set_mempolicy      305
+#define __NR_kexec_load         306
+#define __NR_move_pages         307
+#define __NR_getcpu             308
+#define __NR_epoll_pwait        309
+#define __NR_utimensat          310
+#define __NR_signalfd           311
+#define __NR_timerfd_create     312
+#define __NR_eventfd            313
+#define __NR_fallocate          314
+#define __NR_timerfd_settime    315
+#define __NR_timerfd_gettime    316
+#define __NR_signalfd4          317
+#define __NR_eventfd2           318
+#define __NR_epoll_create1      319
+#define __NR_dup3               320
+#define __NR_pipe2              321
+#define __NR_inotify_init1      322
+
+#define NR_SYSCALLS             323
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC64_UNISTD_H */
diff --git a/arch/sparc/include/asm/upa.h b/arch/sparc/include/asm/upa.h
new file mode 100644
index 000000000000..5b1633223f92
--- /dev/null
+++ b/arch/sparc/include/asm/upa.h
@@ -0,0 +1,109 @@
+#ifndef _SPARC64_UPA_H
+#define _SPARC64_UPA_H
+
+#include <asm/asi.h>
+
+/* UPA level registers and defines. */
+
+/* UPA Config Register */
+#define UPA_CONFIG_RESV         0xffffffffc0000000 /* Reserved.                    */
+#define UPA_CONFIG_PCON         0x000000003fc00000 /* Depth of various sys queues. */
+#define UPA_CONFIG_MID          0x00000000003e0000 /* Module ID.                   */
+#define UPA_CONFIG_PCAP         0x000000000001ffff /* Port Capabilities.           */
+
+/* UPA Port ID Register */
+#define UPA_PORTID_FNP          0xff00000000000000 /* Hardcoded to 0xfc on ultra.  */
+#define UPA_PORTID_RESV         0x00fffff800000000 /* Reserved.                    */
+#define UPA_PORTID_ECCVALID     0x0000000400000000 /* Zero if mod can generate ECC */
+#define UPA_PORTID_ONEREAD      0x0000000200000000 /* Set if mod generates P_RASB  */
+#define UPA_PORTID_PINTRDQ      0x0000000180000000 /* # outstanding P_INT_REQ's    */
+#define UPA_PORTID_PREQDQ       0x000000007e000000 /* slave-wr's to mod supported  */
+#define UPA_PORTID_PREQRD       0x0000000001e00000 /* # incoming P_REQ's supported */
+#define UPA_PORTID_UPACAP       0x00000000001f0000 /* UPA capabilities of mod      */
+#define UPA_PORTID_ID           0x000000000000ffff /* Module Identification bits  */
+
+/* UPA I/O space accessors */
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+static inline unsigned char _upa_readb(unsigned long addr)
+{
+        unsigned char ret;
+
+        __asm__ __volatile__("lduba\t[%1] %2, %0\t/* upa_readb */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+        return ret;
+}
+
+static inline unsigned short _upa_readw(unsigned long addr)
+{
+        unsigned short ret;
+
+        __asm__ __volatile__("lduha\t[%1] %2, %0\t/* upa_readw */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+        return ret;
+}
+
+static inline unsigned int _upa_readl(unsigned long addr)
+{
+        unsigned int ret;
+
+        __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* upa_readl */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+        return ret;
+}
+
+static inline unsigned long _upa_readq(unsigned long addr)
+{
+        unsigned long ret;
+
+        __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* upa_readq */"
+                             : "=r" (ret)
+                             : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+        return ret;
+}
+
+static inline void _upa_writeb(unsigned char b, unsigned long addr)
+{
+        __asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */"
+                             : /* no outputs */
+                             : "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writew(unsigned short w, unsigned long addr)
+{
+        __asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */"
+                             : /* no outputs */
+                             : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writel(unsigned int l, unsigned long addr)
+{
+        __asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */"
+                             : /* no outputs */
+                             : "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writeq(unsigned long q, unsigned long addr)
+{
+        __asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */"
+                             : /* no outputs */
+                             : "r" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define upa_readb(__addr)               (_upa_readb((unsigned long)(__addr)))
+#define upa_readw(__addr)               (_upa_readw((unsigned long)(__addr)))
+#define upa_readl(__addr)               (_upa_readl((unsigned long)(__addr)))
+#define upa_readq(__addr)               (_upa_readq((unsigned long)(__addr)))
+#define upa_writeb(__b, __addr)         (_upa_writeb((__b), (unsigned long)(__addr)))
+#define upa_writew(__w, __addr)         (_upa_writew((__w), (unsigned long)(__addr)))
+#define upa_writel(__l, __addr)         (_upa_writel((__l), (unsigned long)(__addr)))
+#define upa_writeq(__q, __addr)         (_upa_writeq((__q), (unsigned long)(__addr)))
+#endif /* __KERNEL__ && !__ASSEMBLY__ */
+
+#endif /* !(_SPARC64_UPA_H) */
diff --git a/arch/sparc/include/asm/user.h b/arch/sparc/include/asm/user.h
new file mode 100644
index 000000000000..3400ea87f148
--- /dev/null
+++ b/arch/sparc/include/asm/user.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_USER_H
+#define _SPARC_USER_H
+
+/* Nothing to define.  */
+
+#endif /* !(_SPARC_USER_H) */
diff --git a/arch/sparc/include/asm/utrap.h b/arch/sparc/include/asm/utrap.h
new file mode 100644
index 000000000000..b10e527c22d9
--- /dev/null
+++ b/arch/sparc/include/asm/utrap.h
@@ -0,0 +1,51 @@
+/*
+ * include/asm/utrap.h
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASM_SPARC64_UTRAP_H
+#define __ASM_SPARC64_UTRAP_H
+
+#define UT_INSTRUCTION_EXCEPTION                1
+#define UT_INSTRUCTION_ERROR                    2
+#define UT_INSTRUCTION_PROTECTION               3
+#define UT_ILLTRAP_INSTRUCTION                  4
+#define UT_ILLEGAL_INSTRUCTION                  5
+#define UT_PRIVILEGED_OPCODE                    6
+#define UT_FP_DISABLED                          7
+#define UT_FP_EXCEPTION_IEEE_754                8
+#define UT_FP_EXCEPTION_OTHER                   9
+#define UT_TAG_OVERVIEW                         10
+#define UT_DIVISION_BY_ZERO                     11
+#define UT_DATA_EXCEPTION                       12
+#define UT_DATA_ERROR                           13
+#define UT_DATA_PROTECTION                      14
+#define UT_MEM_ADDRESS_NOT_ALIGNED              15
+#define UT_PRIVILEGED_ACTION                    16
+#define UT_ASYNC_DATA_ERROR                     17
+#define UT_TRAP_INSTRUCTION_16                  18
+#define UT_TRAP_INSTRUCTION_17                  19
+#define UT_TRAP_INSTRUCTION_18                  20
+#define UT_TRAP_INSTRUCTION_19                  21
+#define UT_TRAP_INSTRUCTION_20                  22
+#define UT_TRAP_INSTRUCTION_21                  23
+#define UT_TRAP_INSTRUCTION_22                  24
+#define UT_TRAP_INSTRUCTION_23                  25
+#define UT_TRAP_INSTRUCTION_24                  26
+#define UT_TRAP_INSTRUCTION_25                  27
+#define UT_TRAP_INSTRUCTION_26                  28
+#define UT_TRAP_INSTRUCTION_27                  29
+#define UT_TRAP_INSTRUCTION_28                  30
+#define UT_TRAP_INSTRUCTION_29                  31
+#define UT_TRAP_INSTRUCTION_30                  32
+#define UT_TRAP_INSTRUCTION_31                  33
+
+#define UTH_NOCHANGE                            (-1)
+
+#ifndef __ASSEMBLY__
+typedef int utrap_entry_t;
+typedef void *utrap_handler_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/arch/sparc/include/asm/vac-ops.h b/arch/sparc/include/asm/vac-ops.h
new file mode 100644
index 000000000000..d10527611f11
--- /dev/null
+++ b/arch/sparc/include/asm/vac-ops.h
@@ -0,0 +1,134 @@
+#ifndef _SPARC_VAC_OPS_H
+#define _SPARC_VAC_OPS_H
+
+/* vac-ops.h: Inline assembly routines to do operations on the Sparc
+ *            VAC (virtual address cache) for the sun4c.
+ *
+ * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <asm/sysen.h>
+#include <asm/contregs.h>
+#include <asm/asi.h>
+
+/* The SUN4C models have a virtually addressed write-through
+ * cache.
+ *
+ * The cache tags are directly accessible through an ASI and
+ * each have the form:
+ *
+ * ------------------------------------------------------------
+ * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ |
+ * ------------------------------------------------------------
+ *  31 25  24   22     21     20     19    18 16  15   2  1  0
+ *
+ * MBZ: These bits are either unused and/or reserved and should
+ *      be written as zeroes.
+ *
+ * CONTEXT: Records the context to which this cache line belongs.
+ *
+ * WRITE: A copy of the writable bit from the mmu pte access bits.
+ *
+ * PRIV: A copy of the privileged bit from the pte access bits.
+ *
+ * VALID: If set, this line is valid, else invalid.
+ *
+ * TagID: Fourteen bits of tag ID.
+ *
+ * Every virtual address is seen by the cache like this:
+ *
+ * ----------------------------------------
+ * |  RESV  | TagID | LINE | BYTE-in-LINE |
+ * ----------------------------------------
+ *  31    30 29   16 15   4 3            0
+ *
+ * RESV: Unused/reserved.
+ *
+ * TagID: Used to match the Tag-ID in that vac tags.
+ *
+ * LINE: Which line within the cache
+ *
+ * BYTE-in-LINE: Which byte within the cache line.
+ */
+
+/* Sun4c VAC Tags */
+#define S4CVACTAG_CID      0x01c00000
+#define S4CVACTAG_W        0x00200000
+#define S4CVACTAG_P        0x00100000
+#define S4CVACTAG_V        0x00080000
+#define S4CVACTAG_TID      0x0000fffc
+
+/* Sun4c VAC Virtual Address */
+/* These aren't used, why bother? (Anton) */
+#if 0
+#define S4CVACVA_TID       0x3fff0000
+#define S4CVACVA_LINE      0x0000fff0
+#define S4CVACVA_BIL       0x0000000f
+#endif
+
+/* The indexing of cache lines creates a problem.  Because the line
+ * field of a virtual address extends past the page offset within
+ * the virtual address it is possible to have what are called
+ * 'bad aliases' which will create inconsistencies.  So we must make
+ * sure that within a context that if a physical page is mapped
+ * more than once, that 'extra' line bits are the same.  If this is
+ * not the case, and thus is a 'bad alias' we must turn off the
+ * cacheable bit in the pte's of all such pages.
+ */
+
+#ifdef CONFIG_SUN4
+#define S4CVAC_BADBITS     0x0001e000
+#else
+#define S4CVAC_BADBITS    0x0000f000
+#endif
+
+/* The following is true if vaddr1 and vaddr2 would cause
+ * a 'bad alias'.
+ */
+#define S4CVAC_BADALIAS(vaddr1, vaddr2) \
+        ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \
+         (S4CVAC_BADBITS))
+
+/* The following structure describes the characteristics of a sun4c
+ * VAC as probed from the prom during boot time.
+ */
+struct sun4c_vac_props {
+        unsigned int num_bytes;     /* Size of the cache */
+        unsigned int num_lines;     /* Number of cache lines */
+        unsigned int do_hwflushes;  /* Hardware flushing available? */
+        enum { VAC_NONE, VAC_WRITE_THROUGH,
+            VAC_WRITE_BACK } type;  /* What type of VAC? */
+        unsigned int linesize;      /* Size of each line in bytes */
+        unsigned int log2lsize;     /* log2(linesize) */
+        unsigned int on;            /* VAC is enabled */
+};
+
+extern struct sun4c_vac_props sun4c_vacinfo;
+
+/* sun4c_enable_vac() enables the sun4c virtual address cache. */
+static inline void sun4c_enable_vac(void)
+{
+        __asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+                             "or    %%g1, %2, %%g1\n\t"
+                             "stba  %%g1, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" ((unsigned int) AC_SENABLE),
+                             "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+                             : "g1", "memory");
+        sun4c_vacinfo.on = 1;
+}
+
+/* sun4c_disable_vac() disables the virtual address cache. */
+static inline void sun4c_disable_vac(void)
+{
+        __asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+                             "andn  %%g1, %2, %%g1\n\t"
+                             "stba  %%g1, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" ((unsigned int) AC_SENABLE),
+                             "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+                             : "g1", "memory");
+        sun4c_vacinfo.on = 0;
+}
+
+#endif /* !(_SPARC_VAC_OPS_H) */
diff --git a/arch/sparc/include/asm/vaddrs.h b/arch/sparc/include/asm/vaddrs.h
new file mode 100644
index 000000000000..541e13755cec
--- /dev/null
+++ b/arch/sparc/include/asm/vaddrs.h
@@ -0,0 +1,64 @@
+#ifndef _SPARC_VADDRS_H
+#define _SPARC_VADDRS_H
+
+#include <asm/head.h>
+
+/*
+ * asm/vaddrs.h:  Here we define the virtual addresses at
+ *                      which important things will be mapped.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#define SRMMU_MAXMEM            0x0c000000
+
+#define SRMMU_NOCACHE_VADDR     (KERNBASE + SRMMU_MAXMEM)
+                                /* = 0x0fc000000 */
+/* XXX Empiricals - this needs to go away - KMW */
+#define SRMMU_MIN_NOCACHE_PAGES (550)
+#define SRMMU_MAX_NOCACHE_PAGES (1280)
+
+/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize()
+ * to determine the amount of memory that will be reserved as nocache:
+ *
+ * 256 pages will be taken as nocache per each
+ * SRMMU_NOCACHE_ALCRATIO MB of system memory.
+ *
+ * limits enforced:     nocache minimum = 256 pages
+ *                      nocache maximum = 1280 pages
+ */
+#define SRMMU_NOCACHE_ALCRATIO  64      /* 256 pages per 64MB of system RAM */
+
+#define SUN4M_IOBASE_VADDR      0xfd000000 /* Base for mapping pages */
+#define IOBASE_VADDR            0xfe000000
+#define IOBASE_END              0xfe600000
+
+/*
+ * On the sun4/4c we need a place
+ * to reliably map locked down kernel data.  This includes the
+ * task_struct and kernel stack pages of each process plus the
+ * scsi buffers during dvma IO transfers, also the floppy buffers
+ * during pseudo dma which runs with traps off (no faults allowed).
+ * Some quick calculations yield:
+ *       NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000
+ * Subtract this from 0xc00000 and you get 0x927C0 of vm left
+ * over to map SCSI dvma + floppy pseudo-dma buffers.  So be
+ * careful if you change NR_TASKS or else there won't be enough
+ * room for it all.
+ */
+#define SUN4C_LOCK_VADDR        0xff000000
+#define SUN4C_LOCK_END          0xffc00000
+
+#define KADB_DEBUGGER_BEGVM     0xffc00000 /* Where kern debugger is in virt-mem */
+#define KADB_DEBUGGER_ENDVM     0xffd00000
+#define DEBUG_FIRSTVADDR        KADB_DEBUGGER_BEGVM
+#define DEBUG_LASTVADDR         KADB_DEBUGGER_ENDVM
+
+#define LINUX_OPPROM_BEGVM      0xffd00000
+#define LINUX_OPPROM_ENDVM      0xfff00000
+
+#define DVMA_VADDR              0xfff00000 /* Base area of the DVMA on suns */
+#define DVMA_END                0xfffc0000
+
+#endif /* !(_SPARC_VADDRS_H) */
diff --git a/arch/sparc/include/asm/vfc_ioctls.h b/arch/sparc/include/asm/vfc_ioctls.h
new file mode 100644
index 000000000000..af8b69007b22
--- /dev/null
+++ b/arch/sparc/include/asm/vfc_ioctls.h
@@ -0,0 +1,58 @@
+/* Copyright (c) 1996 by Manish Vachharajani */
+
+#ifndef _LINUX_VFC_IOCTLS_H_
+#define _LINUX_VFC_IOCTLS_H_
+
+        /* IOCTLs */
+#define VFC_IOCTL(a)          (('j' << 8) | a)
+#define VFCGCTRL        (VFC_IOCTL (0))         /* get vfc attributes */
+#define VFCSCTRL        (VFC_IOCTL (1))         /* set vfc attributes */
+#define VFCGVID         (VFC_IOCTL (2))         /* get video decoder attributes */
+#define VFCSVID         (VFC_IOCTL (3))         /* set video decoder attributes */
+#define VFCHUE          (VFC_IOCTL (4))         /* set hue */
+#define VFCPORTCHG      (VFC_IOCTL (5))         /* change port */
+#define VFCRDINFO       (VFC_IOCTL (6))         /* read info */
+
+        /* Options for setting the vfc attributes and status */
+#define MEMPRST         0x1     /* reset FIFO ptr. */
+#define CAPTRCMD        0x2     /* start capture and wait */
+#define DIAGMODE        0x3     /* diag mode */
+#define NORMMODE        0x4     /* normal mode */
+#define CAPTRSTR        0x5     /* start capture */
+#define CAPTRWAIT       0x6     /* wait for capture to finish */
+
+
+        /* Options for the decoder */
+#define STD_NTSC        0x1     /* NTSC mode */
+#define STD_PAL         0x2     /* PAL mode */
+#define COLOR_ON        0x3     /* force color ON */
+#define MONO            0x4     /* force color OFF */
+
+        /* Values returned by ioctl 2 */
+
+#define NO_LOCK         1
+#define NTSC_COLOR      2
+#define NTSC_NOCOLOR    3
+#define PAL_COLOR       4
+#define PAL_NOCOLOR     5
+
+/* Not too sure what this does yet */
+        /* Options for setting Field number */
+#define ODD_FIELD       0x1
+#define EVEN_FIELD      0x0
+#define ACTIVE_ONLY     0x2
+#define NON_ACTIVE      0x0
+
+/* Debug options */
+#define VFC_I2C_SEND 0
+#define VFC_I2C_RECV 1
+
+struct vfc_debug_inout
+{
+        unsigned long addr;
+        unsigned long ret;
+        unsigned long len;
+        unsigned char __user *buffer;
+};
+
+#endif /* _LINUX_VFC_IOCTLS_H_ */
diff --git a/arch/sparc/include/asm/vga.h b/arch/sparc/include/asm/vga.h
new file mode 100644
index 000000000000..c69d5b2ba19a
--- /dev/null
+++ b/arch/sparc/include/asm/vga.h
@@ -0,0 +1,33 @@
+/*
+ *      Access to VGA videoram
+ *
+ *      (c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+#include <asm/types.h>
+
+#define VT_BUF_HAVE_RW
+
+#undef scr_writew
+#undef scr_readw
+
+static inline void scr_writew(u16 val, u16 *addr)
+{
+        BUG_ON((long) addr >= 0);
+
+        *addr = val;
+}
+
+static inline u16 scr_readw(const u16 *addr)
+{
+        BUG_ON((long) addr >= 0);
+
+        return *addr;
+}
+
+#define VGA_MAP_MEM(x,s) (x)
+
+#endif
diff --git a/arch/sparc/include/asm/viking.h b/arch/sparc/include/asm/viking.h
new file mode 100644
index 000000000000..989930aeb093
--- /dev/null
+++ b/arch/sparc/include/asm/viking.h
@@ -0,0 +1,253 @@
+/*
+ * viking.h:  Defines specific to the GNU/Viking MBUS module.
+ *            This is SRMMU stuff.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_VIKING_H
+#define _SPARC_VIKING_H
+
+#include <asm/asi.h>
+#include <asm/mxcc.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for GNU/Viking modules.
+ *
+ * -----------------------------------------------------------
+ * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME|
+ * -----------------------------------------------------------
+ *  31     24 23-17 16 15 14 13 12 11  10  9  8  7  6-2  1  0
+ *
+ * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache
+ *                            1 = Twalks are cacheable in E-cache
+ *
+ * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present
+ * and never caches them internally (or so states the docs).  Therefore
+ * for machines lacking an E-cache (ie. in MBUS mode) this bit must
+ * remain cleared.
+ *
+ * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable
+ *                            1 = Passthru physical accesses cacheable
+ *
+ * This indicates whether accesses are cacheable when no cachable bit
+ * is present in the pte when the processor is in boot-mode or the
+ * access does not need pte's for translation (ie. pass-thru ASI's).
+ * "Cachable" is only referring to E-cache (if present) and not the
+ * on chip split I/D caches of the GNU/Viking.
+ *
+ * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on
+ *
+ * This enables snooping on the GNU/Viking bus.  This must be on
+ * for the hardware cache consistency mechanisms of the GNU/Viking
+ * to work at all.  On non-mxcc GNU/Viking modules the split I/D
+ * caches will snoop regardless of whether they are enabled, this
+ * takes care of the case where the I or D or both caches are turned
+ * off yet still contain valid data.  Note also that this bit does
+ * not affect GNU/Viking store-buffer snoops, those happen if the
+ * store-buffer is enabled no matter what.
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the GNU/Viking is in boot-mode or not,
+ * if it is then all instruction fetch physical addresses are
+ * computed as 0xff0000000 + low 28 bits of requested address.
+ * GNU/Viking boot-mode does not affect data accesses.  Also,
+ * in boot mode instruction accesses bypass the split on chip I/D
+ * caches, they may be cached by the GNU/MXCC if present and enabled.
+ *
+ * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode
+ *
+ * This indicated the GNU/Viking configuration present.  If in
+ * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache.  If it is
+ * not then the GNU/Viking is on a module VBUS connected directly
+ * to a GNU/MXCC cache controller.  The GNU/MXCC can be thus connected
+ * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d).
+ *
+ * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on
+ *
+ * The GNU/Viking store buffer allows the chip to continue execution
+ * after a store even if the data cannot be placed in one of the
+ * caches during that cycle.  If disabled, all stores operations
+ * occur synchronously.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu GNU/Viking split I/D caches.  Note,
+ * as mentioned above, these caches will snoop the bus in GNU/MBUS
+ * configurations even when disabled to avoid data corruption.
+ *
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define VIKING_MMUENABLE    0x00000001
+#define VIKING_NOFAULT      0x00000002
+#define VIKING_PSO          0x00000080
+#define VIKING_DCENABLE     0x00000100   /* Enable data cache */
+#define VIKING_ICENABLE     0x00000200   /* Enable instruction cache */
+#define VIKING_SBENABLE     0x00000400   /* Enable store buffer */
+#define VIKING_MMODE        0x00000800   /* MBUS mode */
+#define VIKING_PCENABLE     0x00001000   /* Enable parity checking */
+#define VIKING_BMODE        0x00002000   
+#define VIKING_SPENABLE     0x00004000   /* Enable bus cache snooping */
+#define VIKING_ACENABLE     0x00008000   /* Enable alternate caching */
+#define VIKING_TCENABLE     0x00010000   /* Enable table-walks to be cached */
+#define VIKING_DPENABLE     0x00040000   /* Enable the data prefetcher */
+
+/*
+ * GNU/Viking Breakpoint Action Register fields.
+ */
+#define VIKING_ACTION_MIX   0x00001000   /* Enable multiple instructions */
+
+/*
+ * GNU/Viking Cache Tags.
+ */
+#define VIKING_PTAG_VALID   0x01000000   /* Cache block is valid */
+#define VIKING_PTAG_DIRTY   0x00010000   /* Block has been modified */
+#define VIKING_PTAG_SHARED  0x00000100   /* Shared with some other cache */
+
+#ifndef __ASSEMBLY__
+
+static inline void viking_flush_icache(void)
+{
+        __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+                             : /* no outputs */
+                             : "i" (ASI_M_IC_FLCLEAR)
+                             : "memory");
+}
+
+static inline void viking_flush_dcache(void)
+{
+        __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+                             : /* no outputs */
+                             : "i" (ASI_M_DC_FLCLEAR)
+                             : "memory");
+}
+
+static inline void viking_unlock_icache(void)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR)
+                             : "memory");
+}
+
+static inline void viking_unlock_dcache(void)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+                             : /* no outputs */
+                             : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR)
+                             : "memory");
+}
+
+static inline void viking_set_bpreg(unsigned long regval)
+{
+        __asm__ __volatile__("sta %0, [%%g0] %1\n\t"
+                             : /* no outputs */
+                             : "r" (regval), "i" (ASI_M_ACTION)
+                             : "memory");
+}
+
+static inline unsigned long viking_get_bpreg(void)
+{
+        unsigned long regval;
+
+        __asm__ __volatile__("lda [%%g0] %1, %0\n\t"
+                             : "=r" (regval)
+                             : "i" (ASI_M_ACTION));
+        return regval;
+}
+
+static inline void viking_get_dcache_ptag(int set, int block,
+                                              unsigned long *data)
+{
+        unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) |
+                             0x80000000;
+        unsigned long info, page;
+
+        __asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t"
+                              "or %%g0, %%g2, %0\n\t"
+                              "or %%g0, %%g3, %1\n\t"
+                              : "=r" (info), "=r" (page)
+                              : "r" (ptag), "i" (ASI_M_DATAC_TAG)
+                              : "g2", "g3");
+        data[0] = info;
+        data[1] = page;
+}
+
+static inline void viking_mxcc_turn_off_parity(unsigned long *mregp,
+                                                   unsigned long *mxcc_cregp)
+{
+        unsigned long mreg = *mregp;
+        unsigned long mxcc_creg = *mxcc_cregp;
+
+        mreg &= ~(VIKING_PCENABLE);
+        mxcc_creg &= ~(MXCC_CTL_PARE);
+
+        __asm__ __volatile__ ("set 1f, %%g2\n\t"
+                              "andcc %%g2, 4, %%g0\n\t"
+                              "bne 2f\n\t"
+                              " nop\n"
+                              "1:\n\t"
+                              "sta %0, [%%g0] %3\n\t"
+                              "sta %1, [%2] %4\n\t"
+                              "b 1f\n\t"
+                              " nop\n\t"
+                              "nop\n"
+                              "2:\n\t"
+                              "sta %0, [%%g0] %3\n\t"
+                              "sta %1, [%2] %4\n"
+                              "1:\n\t"
+                              : /* no output */
+                              : "r" (mreg), "r" (mxcc_creg),
+                                "r" (MXCC_CREG), "i" (ASI_M_MMUREGS),
+                                "i" (ASI_M_MXCC)
+                              : "g2", "memory", "cc");
+        *mregp = mreg;
+        *mxcc_cregp = mxcc_creg;
+}
+
+static inline unsigned long viking_hwprobe(unsigned long vaddr)
+{
+        unsigned long val;
+
+        vaddr &= PAGE_MASK;
+        /* Probe all MMU entries. */
+        __asm__ __volatile__("lda [%1] %2, %0\n\t"
+                             : "=r" (val)
+                             : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+        if (!val)
+                return 0;
+
+        /* Probe region. */
+        __asm__ __volatile__("lda [%1] %2, %0\n\t"
+                             : "=r" (val)
+                             : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE));
+        if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+                vaddr &= ~SRMMU_PGDIR_MASK;
+                vaddr >>= PAGE_SHIFT;
+                return val | (vaddr << 8);
+        }
+
+        /* Probe segment. */
+        __asm__ __volatile__("lda [%1] %2, %0\n\t"
+                             : "=r" (val)
+                             : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE));
+        if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+                vaddr &= ~SRMMU_REAL_PMD_MASK;
+                vaddr >>= PAGE_SHIFT;
+                return val | (vaddr << 8);
+        }
+
+        /* Probe page. */
+        __asm__ __volatile__("lda [%1] %2, %0\n\t"
+                             : "=r" (val)
+                             : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE));
+        return val;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_VIKING_H) */
diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h
new file mode 100644
index 000000000000..d4de32f0f8af
--- /dev/null
+++ b/arch/sparc/include/asm/vio.h
@@ -0,0 +1,406 @@
+#ifndef _SPARC64_VIO_H
+#define _SPARC64_VIO_H
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/list.h>
+#include <linux/log2.h>
+
+#include <asm/ldc.h>
+#include <asm/mdesc.h>
+
+struct vio_msg_tag {
+        u8                      type;
+#define VIO_TYPE_CTRL           0x01
+#define VIO_TYPE_DATA           0x02
+#define VIO_TYPE_ERR            0x04
+
+        u8                      stype;
+#define VIO_SUBTYPE_INFO        0x01
+#define VIO_SUBTYPE_ACK         0x02
+#define VIO_SUBTYPE_NACK        0x04
+
+        u16                     stype_env;
+#define VIO_VER_INFO            0x0001
+#define VIO_ATTR_INFO           0x0002
+#define VIO_DRING_REG           0x0003
+#define VIO_DRING_UNREG         0x0004
+#define VIO_RDX                 0x0005
+#define VIO_PKT_DATA            0x0040
+#define VIO_DESC_DATA           0x0041
+#define VIO_DRING_DATA          0x0042
+#define VNET_MCAST_INFO         0x0101
+
+        u32             sid;
+};
+
+struct vio_rdx {
+        struct vio_msg_tag      tag;
+        u64                     resv[6];
+};
+
+struct vio_ver_info {
+        struct vio_msg_tag      tag;
+        u16                     major;
+        u16                     minor;
+        u8                      dev_class;
+#define VDEV_NETWORK            0x01
+#define VDEV_NETWORK_SWITCH     0x02
+#define VDEV_DISK               0x03
+#define VDEV_DISK_SERVER        0x04
+
+        u8                      resv1[3];
+        u64                     resv2[5];
+};
+
+struct vio_dring_register {
+        struct vio_msg_tag      tag;
+        u64                     dring_ident;
+        u32                     num_descr;
+        u32                     descr_size;
+        u16                     options;
+#define VIO_TX_DRING            0x0001
+#define VIO_RX_DRING            0x0002
+        u16                     resv;
+        u32                     num_cookies;
+        struct ldc_trans_cookie cookies[0];
+};
+
+struct vio_dring_unregister {
+        struct vio_msg_tag      tag;
+        u64                     dring_ident;
+        u64                     resv[5];
+};
+
+/* Data transfer modes */
+#define VIO_PKT_MODE            0x01 /* Packet based transfer   */
+#define VIO_DESC_MODE           0x02 /* In-band descriptors     */
+#define VIO_DRING_MODE          0x03 /* Descriptor rings        */
+
+struct vio_dring_data {
+        struct vio_msg_tag      tag;
+        u64                     seq;
+        u64                     dring_ident;
+        u32                     start_idx;
+        u32                     end_idx;
+        u8                      state;
+#define VIO_DRING_ACTIVE        0x01
+#define VIO_DRING_STOPPED       0x02
+
+        u8                      __pad1;
+        u16                     __pad2;
+        u32                     __pad3;
+        u64                     __par4[2];
+};
+
+struct vio_dring_hdr {
+        u8                      state;
+#define VIO_DESC_FREE           0x01
+#define VIO_DESC_READY          0x02
+#define VIO_DESC_ACCEPTED       0x03
+#define VIO_DESC_DONE           0x04
+        u8                      ack;
+#define VIO_ACK_ENABLE          0x01
+#define VIO_ACK_DISABLE         0x00
+
+        u16                     __pad1;
+        u32                     __pad2;
+};
+
+/* VIO disk specific structures and defines */
+struct vio_disk_attr_info {
+        struct vio_msg_tag      tag;
+        u8                      xfer_mode;
+        u8                      vdisk_type;
+#define VD_DISK_TYPE_SLICE      0x01 /* Slice in block device   */
+#define VD_DISK_TYPE_DISK       0x02 /* Entire block device     */
+        u16                     resv1;
+        u32                     vdisk_block_size;
+        u64                     operations;
+        u64                     vdisk_size;
+        u64                     max_xfer_size;
+        u64                     resv2[2];
+};
+
+struct vio_disk_desc {
+        struct vio_dring_hdr    hdr;
+        u64                     req_id;
+        u8                      operation;
+#define VD_OP_BREAD             0x01 /* Block read                      */
+#define VD_OP_BWRITE            0x02 /* Block write                     */
+#define VD_OP_FLUSH             0x03 /* Flush disk contents             */
+#define VD_OP_GET_WCE           0x04 /* Get write-cache status          */
+#define VD_OP_SET_WCE           0x05 /* Enable/disable write-cache      */
+#define VD_OP_GET_VTOC          0x06 /* Get VTOC                        */
+#define VD_OP_SET_VTOC          0x07 /* Set VTOC                        */
+#define VD_OP_GET_DISKGEOM      0x08 /* Get disk geometry               */
+#define VD_OP_SET_DISKGEOM      0x09 /* Set disk geometry               */
+#define VD_OP_SCSICMD           0x0a /* SCSI control command            */
+#define VD_OP_GET_DEVID         0x0b /* Get device ID                   */
+#define VD_OP_GET_EFI           0x0c /* Get EFI                         */
+#define VD_OP_SET_EFI           0x0d /* Set EFI                         */
+        u8                      slice;
+        u16                     resv1;
+        u32                     status;
+        u64                     offset;
+        u64                     size;
+        u32                     ncookies;
+        u32                     resv2;
+        struct ldc_trans_cookie cookies[0];
+};
+
+#define VIO_DISK_VNAME_LEN      8
+#define VIO_DISK_ALABEL_LEN     128
+#define VIO_DISK_NUM_PART       8
+
+struct vio_disk_vtoc {
+        u8                      volume_name[VIO_DISK_VNAME_LEN];
+        u16                     sector_size;
+        u16                     num_partitions;
+        u8                      ascii_label[VIO_DISK_ALABEL_LEN];
+        struct {
+                u16             id;
+                u16             perm_flags;
+                u32             resv;
+                u64             start_block;
+                u64             num_blocks;
+        } partitions[VIO_DISK_NUM_PART];
+};
+
+struct vio_disk_geom {
+        u16                     num_cyl; /* Num data cylinders          */
+        u16                     alt_cyl; /* Num alternate cylinders     */
+        u16                     beg_cyl; /* Cyl off of fixed head area  */
+        u16                     num_hd;  /* Num heads                   */
+        u16                     num_sec; /* Num sectors                 */
+        u16                     ifact;   /* Interleave factor           */
+        u16                     apc;     /* Alts per cylinder (SCSI)    */
+        u16                     rpm;     /* Revolutions per minute      */
+        u16                     phy_cyl; /* Num physical cylinders      */
+        u16                     wr_skip; /* Num sects to skip, writes   */
+        u16                     rd_skip; /* Num sects to skip, writes   */
+};
+
+struct vio_disk_devid {
+        u16                     resv;
+        u16                     type;
+        u32                     len;
+        char                    id[0];
+};
+
+struct vio_disk_efi {
+        u64                     lba;
+        u64                     len;
+        char                    data[0];
+};
+
+/* VIO net specific structures and defines */
+struct vio_net_attr_info {
+        struct vio_msg_tag      tag;
+        u8                      xfer_mode;
+        u8                      addr_type;
+#define VNET_ADDR_ETHERMAC      0x01
+        u16                     ack_freq;
+        u32                     resv1;
+        u64                     addr;
+        u64                     mtu;
+        u64                     resv2[3];
+};
+
+#define VNET_NUM_MCAST          7
+
+struct vio_net_mcast_info {
+        struct vio_msg_tag      tag;
+        u8                      set;
+        u8                      count;
+        u8                      mcast_addr[VNET_NUM_MCAST * 6];
+        u32                     resv;
+};
+
+struct vio_net_desc {
+        struct vio_dring_hdr    hdr;
+        u32                     size;
+        u32                     ncookies;
+        struct ldc_trans_cookie cookies[0];
+};
+
+#define VIO_MAX_RING_COOKIES    24
+
+struct vio_dring_state {
+        u64                     ident;
+        void                    *base;
+        u64                     snd_nxt;
+        u64                     rcv_nxt;
+        u32                     entry_size;
+        u32                     num_entries;
+        u32                     prod;
+        u32                     cons;
+        u32                     pending;
+        int                     ncookies;
+        struct ldc_trans_cookie cookies[VIO_MAX_RING_COOKIES];
+};
+
+static inline void *vio_dring_cur(struct vio_dring_state *dr)
+{
+        return dr->base + (dr->entry_size * dr->prod);
+}
+
+static inline void *vio_dring_entry(struct vio_dring_state *dr,
+                                    unsigned int index)
+{
+        return dr->base + (dr->entry_size * index);
+}
+
+static inline u32 vio_dring_avail(struct vio_dring_state *dr,
+                                  unsigned int ring_size)
+{
+        BUILD_BUG_ON(!is_power_of_2(ring_size));
+
+        return (dr->pending -
+                ((dr->prod - dr->cons) & (ring_size - 1)));
+}
+
+#define VIO_MAX_TYPE_LEN        32
+#define VIO_MAX_COMPAT_LEN      64
+
+struct vio_dev {
+        u64                     mp;
+        struct device_node      *dp;
+
+        char                    type[VIO_MAX_TYPE_LEN];
+        char                    compat[VIO_MAX_COMPAT_LEN];
+        int                     compat_len;
+
+        u64                     dev_no;
+
+        unsigned long           channel_id;
+
+        unsigned int            tx_irq;
+        unsigned int            rx_irq;
+
+        struct device           dev;
+};
+
+struct vio_driver {
+        struct list_head                node;
+        const struct vio_device_id      *id_table;
+        int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
+        int (*remove)(struct vio_dev *dev);
+        void (*shutdown)(struct vio_dev *dev);
+        unsigned long                   driver_data;
+        struct device_driver            driver;
+};
+
+struct vio_version {
+        u16             major;
+        u16             minor;
+};
+
+struct vio_driver_state;
+struct vio_driver_ops {
+        int     (*send_attr)(struct vio_driver_state *vio);
+        int     (*handle_attr)(struct vio_driver_state *vio, void *pkt);
+        void    (*handshake_complete)(struct vio_driver_state *vio);
+};
+
+struct vio_completion {
+        struct completion       com;
+        int                     err;
+        int                     waiting_for;
+};
+
+struct vio_driver_state {
+        /* Protects VIO handshake and, optionally, driver private state.  */
+        spinlock_t              lock;
+
+        struct ldc_channel      *lp;
+
+        u32                     _peer_sid;
+        u32                     _local_sid;
+        struct vio_dring_state  drings[2];
+#define VIO_DRIVER_TX_RING      0
+#define VIO_DRIVER_RX_RING      1
+
+        u8                      hs_state;
+#define VIO_HS_INVALID          0x00
+#define VIO_HS_GOTVERS          0x01
+#define VIO_HS_GOT_ATTR         0x04
+#define VIO_HS_SENT_DREG        0x08
+#define VIO_HS_SENT_RDX         0x10
+#define VIO_HS_GOT_RDX_ACK      0x20
+#define VIO_HS_GOT_RDX          0x40
+#define VIO_HS_SENT_RDX_ACK     0x80
+#define VIO_HS_COMPLETE         (VIO_HS_GOT_RDX_ACK | VIO_HS_SENT_RDX_ACK)
+
+        u8                      dev_class;
+
+        u8                      dr_state;
+#define VIO_DR_STATE_TXREG      0x01
+#define VIO_DR_STATE_RXREG      0x02
+#define VIO_DR_STATE_TXREQ      0x10
+#define VIO_DR_STATE_RXREQ      0x20
+
+        u8                      debug;
+#define VIO_DEBUG_HS            0x01
+#define VIO_DEBUG_DATA          0x02
+
+        void                    *desc_buf;
+        unsigned int            desc_buf_len;
+
+        struct vio_completion   *cmp;
+
+        struct vio_dev          *vdev;
+
+        struct timer_list       timer;
+
+        struct vio_version      ver;
+
+        struct vio_version      *ver_table;
+        int                     ver_table_entries;
+
+        char                    *name;
+
+        struct vio_driver_ops   *ops;
+};
+
+#define viodbg(TYPE, f, a...) \
+do {    if (vio->debug & VIO_DEBUG_##TYPE) \
+                printk(KERN_INFO "vio: ID[%lu] " f, \
+                       vio->vdev->channel_id, ## a); \
+} while (0)
+
+extern int vio_register_driver(struct vio_driver *drv);
+extern void vio_unregister_driver(struct vio_driver *drv);
+
+static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
+{
+        return container_of(drv, struct vio_driver, driver);
+}
+
+static inline struct vio_dev *to_vio_dev(struct device *dev)
+{
+        return container_of(dev, struct vio_dev, dev);
+}
+
+extern int vio_ldc_send(struct vio_driver_state *vio, void *data, int len);
+extern void vio_link_state_change(struct vio_driver_state *vio, int event);
+extern void vio_conn_reset(struct vio_driver_state *vio);
+extern int vio_control_pkt_engine(struct vio_driver_state *vio, void *pkt);
+extern int vio_validate_sid(struct vio_driver_state *vio,
+                            struct vio_msg_tag *tp);
+extern u32 vio_send_sid(struct vio_driver_state *vio);
+extern int vio_ldc_alloc(struct vio_driver_state *vio,
+                         struct ldc_channel_config *base_cfg, void *event_arg);
+extern void vio_ldc_free(struct vio_driver_state *vio);
+extern int vio_driver_init(struct vio_driver_state *vio, struct vio_dev *vdev,
+                           u8 dev_class, struct vio_version *ver_table,
+                           int ver_table_size, struct vio_driver_ops *ops,
+                           char *name);
+
+extern void vio_port_up(struct vio_driver_state *vio);
+
+#endif /* _SPARC64_VIO_H */
diff --git a/arch/sparc/include/asm/visasm.h b/arch/sparc/include/asm/visasm.h
new file mode 100644
index 000000000000..de797b9bf552
--- /dev/null
+++ b/arch/sparc/include/asm/visasm.h
@@ -0,0 +1,62 @@
+#ifndef _SPARC64_VISASM_H
+#define _SPARC64_VISASM_H
+
+/* visasm.h:  FPU saving macros for VIS routines
+ *
+ * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+
+/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc */
+
+#define VISEntry                                        \
+        rd              %fprs, %o5;                     \
+        andcc           %o5, (FPRS_FEF|FPRS_DU), %g0;   \
+        be,pt           %icc, 297f;                     \
+         sethi          %hi(297f), %g7;                 \
+        sethi           %hi(VISenter), %g1;             \
+        jmpl            %g1 + %lo(VISenter), %g0;       \
+         or             %g7, %lo(297f), %g7;            \
+297:    wr              %g0, FPRS_FEF, %fprs;           \
+
+#define VISExit                                         \
+        wr              %g0, 0, %fprs;
+
+/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc.
+ * Must preserve %o5 between VISEntryHalf and VISExitHalf */
+
+#define VISEntryHalf                                    \
+        rd              %fprs, %o5;                     \
+        andcc           %o5, FPRS_FEF, %g0;             \
+        be,pt           %icc, 297f;                     \
+         sethi          %hi(298f), %g7;                 \
+        sethi           %hi(VISenterhalf), %g1;         \
+        jmpl            %g1 + %lo(VISenterhalf), %g0;   \
+         or             %g7, %lo(298f), %g7;            \
+        clr             %o5;                            \
+297:    wr              %o5, FPRS_FEF, %fprs;           \
+298:
+
+#define VISExitHalf                                     \
+        wr              %o5, 0, %fprs;
+
+#ifndef __ASSEMBLY__
+static inline void save_and_clear_fpu(void) {
+        __asm__ __volatile__ (
+"               rd %%fprs, %%o5\n"
+"               andcc %%o5, %0, %%g0\n"
+"               be,pt %%icc, 299f\n"
+"                sethi %%hi(298f), %%g7\n"
+"               sethi %%hi(VISenter), %%g1\n"
+"               jmpl %%g1 + %%lo(VISenter), %%g0\n"
+"                or %%g7, %%lo(298f), %%g7\n"
+"       298:    wr %%g0, 0, %%fprs\n"
+"       299:\n"
+"               " : : "i" (FPRS_FEF|FPRS_DU) :
+                "o5", "g1", "g2", "g3", "g7", "cc");
+}
+#endif
+
+#endif /* _SPARC64_ASI_H */
diff --git a/arch/sparc/include/asm/watchdog.h b/arch/sparc/include/asm/watchdog.h
new file mode 100644
index 000000000000..5baf2d3919cf
--- /dev/null
+++ b/arch/sparc/include/asm/watchdog.h
@@ -0,0 +1,31 @@
+/*
+ *
+ * watchdog - Driver interface for the hardware watchdog timers
+ * present on Sun Microsystems boardsets
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef _SPARC64_WATCHDOG_H
+#define _SPARC64_WATCHDOG_H
+
+#include <linux/watchdog.h>
+
+/* Solaris compatibility ioctls--
+ * Ref. <linux/watchdog.h> for standard linux watchdog ioctls
+ */
+#define WIOCSTART _IO (WATCHDOG_IOCTL_BASE, 10)         /* Start Timer          */
+#define WIOCSTOP  _IO (WATCHDOG_IOCTL_BASE, 11)         /* Stop Timer           */
+#define WIOCGSTAT _IOR(WATCHDOG_IOCTL_BASE, 12, int)/* Get Timer Status */
+
+/* Status flags from WIOCGSTAT ioctl
+ */
+#define WD_FREERUN      0x01    /* timer is running, interrupts disabled        */
+#define WD_EXPIRED      0x02    /* timer has expired                                            */
+#define WD_RUNNING      0x04    /* timer is running, interrupts enabled         */
+#define WD_STOPPED      0x08    /* timer has not been started                           */
+#define WD_SERVICED 0x10        /* timer interrupt was serviced                         */
+
+#endif /* ifndef _SPARC64_WATCHDOG_H */
+
diff --git a/arch/sparc/include/asm/winmacro.h b/arch/sparc/include/asm/winmacro.h
new file mode 100644
index 000000000000..5b0a06dc3bcb
--- /dev/null
+++ b/arch/sparc/include/asm/winmacro.h
@@ -0,0 +1,135 @@
+/*
+ * winmacro.h: Window loading-unloading macros.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_WINMACRO_H
+#define _SPARC_WINMACRO_H
+
+#include <asm/ptrace.h>
+
+/* Store the register window onto the 8-byte aligned area starting
+ * at %reg.  It might be %sp, it might not, we don't care.
+ */
+#define STORE_WINDOW(reg) \
+        std     %l0, [%reg + RW_L0]; \
+        std     %l2, [%reg + RW_L2]; \
+        std     %l4, [%reg + RW_L4]; \
+        std     %l6, [%reg + RW_L6]; \
+        std     %i0, [%reg + RW_I0]; \
+        std     %i2, [%reg + RW_I2]; \
+        std     %i4, [%reg + RW_I4]; \
+        std     %i6, [%reg + RW_I6];
+
+/* Load a register window from the area beginning at %reg. */
+#define LOAD_WINDOW(reg) \
+        ldd     [%reg + RW_L0], %l0; \
+        ldd     [%reg + RW_L2], %l2; \
+        ldd     [%reg + RW_L4], %l4; \
+        ldd     [%reg + RW_L6], %l6; \
+        ldd     [%reg + RW_I0], %i0; \
+        ldd     [%reg + RW_I2], %i2; \
+        ldd     [%reg + RW_I4], %i4; \
+        ldd     [%reg + RW_I6], %i6;
+
+/* Loading and storing struct pt_reg trap frames. */
+#define LOAD_PT_INS(base_reg) \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I0], %i0; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I2], %i2; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I4], %i4; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I6], %i6;
+
+#define LOAD_PT_GLOBALS(base_reg) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_G1], %g1; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G2], %g2; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G4], %g4; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G6], %g6;
+
+#define LOAD_PT_YREG(base_reg, scratch) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_Y], %scratch; \
+        wr      %scratch, 0x0, %y;
+
+#define LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_PSR], %pt_psr; \
+        ld      [%base_reg + STACKFRAME_SZ + PT_PC], %pt_pc; \
+        ld      [%base_reg + STACKFRAME_SZ + PT_NPC], %pt_npc;
+
+#define LOAD_PT_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
+        LOAD_PT_YREG(base_reg, scratch) \
+        LOAD_PT_INS(base_reg) \
+        LOAD_PT_GLOBALS(base_reg) \
+        LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
+
+#define STORE_PT_INS(base_reg) \
+        std     %i0, [%base_reg + STACKFRAME_SZ + PT_I0]; \
+        std     %i2, [%base_reg + STACKFRAME_SZ + PT_I2]; \
+        std     %i4, [%base_reg + STACKFRAME_SZ + PT_I4]; \
+        std     %i6, [%base_reg + STACKFRAME_SZ + PT_I6];
+
+#define STORE_PT_GLOBALS(base_reg) \
+        st      %g1, [%base_reg + STACKFRAME_SZ + PT_G1]; \
+        std     %g2, [%base_reg + STACKFRAME_SZ + PT_G2]; \
+        std     %g4, [%base_reg + STACKFRAME_SZ + PT_G4]; \
+        std     %g6, [%base_reg + STACKFRAME_SZ + PT_G6];
+
+#define STORE_PT_YREG(base_reg, scratch) \
+        rd      %y, %scratch; \
+        st      %scratch, [%base_reg + STACKFRAME_SZ + PT_Y];
+
+#define STORE_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+        st      %pt_psr, [%base_reg + STACKFRAME_SZ + PT_PSR]; \
+        st      %pt_pc,  [%base_reg + STACKFRAME_SZ + PT_PC]; \
+        st      %pt_npc, [%base_reg + STACKFRAME_SZ + PT_NPC];
+
+#define STORE_PT_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
+        STORE_PT_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
+        STORE_PT_GLOBALS(base_reg) \
+        STORE_PT_YREG(base_reg, g_scratch) \
+        STORE_PT_INS(base_reg)
+
+#define SAVE_BOLIXED_USER_STACK(cur_reg, scratch) \
+        ld       [%cur_reg + TI_W_SAVED], %scratch; \
+        sll      %scratch, 2, %scratch; \
+        add      %scratch, %cur_reg, %scratch; \
+        st       %sp, [%scratch + TI_RWIN_SPTRS]; \
+        sub      %scratch, %cur_reg, %scratch; \
+        sll      %scratch, 4, %scratch; \
+        add      %scratch, %cur_reg, %scratch; \
+        STORE_WINDOW(scratch + TI_REG_WINDOW); \
+        sub      %scratch, %cur_reg, %scratch; \
+        srl      %scratch, 6, %scratch; \
+        add      %scratch, 1, %scratch; \
+        st       %scratch, [%cur_reg + TI_W_SAVED];
+
+#ifdef CONFIG_SMP
+#define LOAD_CURRENT4M(dest_reg, idreg) \
+        rd       %tbr, %idreg; \
+        sethi    %hi(current_set), %dest_reg; \
+        srl      %idreg, 10, %idreg; \
+        or       %dest_reg, %lo(current_set), %dest_reg; \
+        and      %idreg, 0xc, %idreg; \
+        ld       [%idreg + %dest_reg], %dest_reg;
+
+#define LOAD_CURRENT4D(dest_reg, idreg) \
+        lda      [%g0] ASI_M_VIKING_TMP1, %idreg; \
+        sethi   %hi(C_LABEL(current_set)), %dest_reg; \
+        sll     %idreg, 2, %idreg; \
+        or      %dest_reg, %lo(C_LABEL(current_set)), %dest_reg; \
+        ld      [%idreg + %dest_reg], %dest_reg;
+
+/* Blackbox - take care with this... - check smp4m and smp4d before changing this. */
+#define LOAD_CURRENT(dest_reg, idreg)                                   \
+        sethi    %hi(___b_load_current), %idreg;                        \
+        sethi    %hi(current_set), %dest_reg;                   \
+        sethi    %hi(boot_cpu_id4), %idreg;                     \
+        or       %dest_reg, %lo(current_set), %dest_reg;        \
+        ldub     [%idreg + %lo(boot_cpu_id4)], %idreg;          \
+        ld       [%idreg + %dest_reg], %dest_reg;
+#else
+#define LOAD_CURRENT(dest_reg, idreg) \
+        sethi    %hi(current_set), %idreg; \
+        ld       [%idreg + %lo(current_set)], %dest_reg;
+#endif
+
+#endif /* !(_SPARC_WINMACRO_H) */
diff --git a/arch/sparc/include/asm/xor.h b/arch/sparc/include/asm/xor.h
new file mode 100644
index 000000000000..8ed591c7db2d
--- /dev/null
+++ b/arch/sparc/include/asm/xor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_XOR_H
+#define ___ASM_SPARC_XOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/xor_64.h>
+#else
+#include <asm/xor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/xor_32.h b/arch/sparc/include/asm/xor_32.h
new file mode 100644
index 000000000000..44bfa0787f3f
--- /dev/null
+++ b/arch/sparc/include/asm/xor_32.h
@@ -0,0 +1,269 @@
+/*
+ * include/asm/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for 32-bit Sparc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * ldd/std SPARC instructions.
+ *
+ * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+static void
+sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+        int lines = bytes / (sizeof (long)) / 8;
+
+        do {
+                __asm__ __volatile__(
+                  "ldd [%0 + 0x00], %%g2\n\t"
+                  "ldd [%0 + 0x08], %%g4\n\t"
+                  "ldd [%0 + 0x10], %%o0\n\t"
+                  "ldd [%0 + 0x18], %%o2\n\t"
+                  "ldd [%1 + 0x00], %%o4\n\t"
+                  "ldd [%1 + 0x08], %%l0\n\t"
+                  "ldd [%1 + 0x10], %%l2\n\t"
+                  "ldd [%1 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "std %%g2, [%0 + 0x00]\n\t"
+                  "std %%g4, [%0 + 0x08]\n\t"
+                  "std %%o0, [%0 + 0x10]\n\t"
+                  "std %%o2, [%0 + 0x18]\n"
+                :
+                : "r" (p1), "r" (p2)
+                : "g2", "g3", "g4", "g5",
+                  "o0", "o1", "o2", "o3", "o4", "o5",
+                  "l0", "l1", "l2", "l3", "l4", "l5");
+                p1 += 8;
+                p2 += 8;
+        } while (--lines > 0);
+}
+
+static void
+sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+        unsigned long *p3)
+{
+        int lines = bytes / (sizeof (long)) / 8;
+
+        do {
+                __asm__ __volatile__(
+                  "ldd [%0 + 0x00], %%g2\n\t"
+                  "ldd [%0 + 0x08], %%g4\n\t"
+                  "ldd [%0 + 0x10], %%o0\n\t"
+                  "ldd [%0 + 0x18], %%o2\n\t"
+                  "ldd [%1 + 0x00], %%o4\n\t"
+                  "ldd [%1 + 0x08], %%l0\n\t"
+                  "ldd [%1 + 0x10], %%l2\n\t"
+                  "ldd [%1 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%2 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%2 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%2 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%2 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "std %%g2, [%0 + 0x00]\n\t"
+                  "std %%g4, [%0 + 0x08]\n\t"
+                  "std %%o0, [%0 + 0x10]\n\t"
+                  "std %%o2, [%0 + 0x18]\n"
+                :
+                : "r" (p1), "r" (p2), "r" (p3)
+                : "g2", "g3", "g4", "g5",
+                  "o0", "o1", "o2", "o3", "o4", "o5",
+                  "l0", "l1", "l2", "l3", "l4", "l5");
+                p1 += 8;
+                p2 += 8;
+                p3 += 8;
+        } while (--lines > 0);
+}
+
+static void
+sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+        unsigned long *p3, unsigned long *p4)
+{
+        int lines = bytes / (sizeof (long)) / 8;
+
+        do {
+                __asm__ __volatile__(
+                  "ldd [%0 + 0x00], %%g2\n\t"
+                  "ldd [%0 + 0x08], %%g4\n\t"
+                  "ldd [%0 + 0x10], %%o0\n\t"
+                  "ldd [%0 + 0x18], %%o2\n\t"
+                  "ldd [%1 + 0x00], %%o4\n\t"
+                  "ldd [%1 + 0x08], %%l0\n\t"
+                  "ldd [%1 + 0x10], %%l2\n\t"
+                  "ldd [%1 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%2 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%2 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%2 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%2 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%3 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%3 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%3 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%3 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "std %%g2, [%0 + 0x00]\n\t"
+                  "std %%g4, [%0 + 0x08]\n\t"
+                  "std %%o0, [%0 + 0x10]\n\t"
+                  "std %%o2, [%0 + 0x18]\n"
+                :
+                : "r" (p1), "r" (p2), "r" (p3), "r" (p4)
+                : "g2", "g3", "g4", "g5",
+                  "o0", "o1", "o2", "o3", "o4", "o5",
+                  "l0", "l1", "l2", "l3", "l4", "l5");
+                p1 += 8;
+                p2 += 8;
+                p3 += 8;
+                p4 += 8;
+        } while (--lines > 0);
+}
+
+static void
+sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+        unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+        int lines = bytes / (sizeof (long)) / 8;
+
+        do {
+                __asm__ __volatile__(
+                  "ldd [%0 + 0x00], %%g2\n\t"
+                  "ldd [%0 + 0x08], %%g4\n\t"
+                  "ldd [%0 + 0x10], %%o0\n\t"
+                  "ldd [%0 + 0x18], %%o2\n\t"
+                  "ldd [%1 + 0x00], %%o4\n\t"
+                  "ldd [%1 + 0x08], %%l0\n\t"
+                  "ldd [%1 + 0x10], %%l2\n\t"
+                  "ldd [%1 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%2 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%2 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%2 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%2 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%3 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%3 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%3 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%3 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%4 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%4 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%4 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%4 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "std %%g2, [%0 + 0x00]\n\t"
+                  "std %%g4, [%0 + 0x08]\n\t"
+                  "std %%o0, [%0 + 0x10]\n\t"
+                  "std %%o2, [%0 + 0x18]\n"
+                :
+                : "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5)
+                : "g2", "g3", "g4", "g5",
+                  "o0", "o1", "o2", "o3", "o4", "o5",
+                  "l0", "l1", "l2", "l3", "l4", "l5");
+                p1 += 8;
+                p2 += 8;
+                p3 += 8;
+                p4 += 8;
+                p5 += 8;
+        } while (--lines > 0);
+}
+
+static struct xor_block_template xor_block_SPARC = {
+        .name   = "SPARC",
+        .do_2   = sparc_2,
+        .do_3   = sparc_3,
+        .do_4   = sparc_4,
+        .do_5   = sparc_5,
+};
+
+/* For grins, also test the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES                               \
+        do {                                            \
+                xor_speed(&xor_block_8regs);            \
+                xor_speed(&xor_block_32regs);           \
+                xor_speed(&xor_block_SPARC);            \
+        } while (0)
diff --git a/arch/sparc/include/asm/xor_64.h b/arch/sparc/include/asm/xor_64.h
new file mode 100644
index 000000000000..bee4bf4be3af
--- /dev/null
+++ b/arch/sparc/include/asm/xor_64.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm/xor.h
+ *
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * UltraSparc Visual Instruction Set and Niagara block-init
+ * twin-load instructions.
+ *
+ * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/spitfire.h>
+
+extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
+                      unsigned long *);
+extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
+                      unsigned long *, unsigned long *);
+extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
+                      unsigned long *, unsigned long *, unsigned long *);
+
+/* XXX Ugh, write cheetah versions... -DaveM */
+
+static struct xor_block_template xor_block_VIS = {
+        .name   = "VIS",
+        .do_2   = xor_vis_2,
+        .do_3   = xor_vis_3,
+        .do_4   = xor_vis_4,
+        .do_5   = xor_vis_5,
+};
+
+extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *,
+                          unsigned long *);
+extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *,
+                          unsigned long *, unsigned long *);
+extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *,
+                          unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_niagara = {
+        .name   = "Niagara",
+        .do_2   = xor_niagara_2,
+        .do_3   = xor_niagara_3,
+        .do_4   = xor_niagara_4,
+        .do_5   = xor_niagara_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES                               \
+        do {                                            \
+                xor_speed(&xor_block_VIS);              \
+                xor_speed(&xor_block_niagara);          \
+        } while (0)
+
+/* For VIS for everything except Niagara.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) \
+        ((tlb_type == hypervisor && \
+          (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
+           sun4v_chip_type == SUN4V_CHIP_NIAGARA2)) ? \
+         &xor_block_niagara : \
+         &xor_block_VIS)
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 6707422c9847..5267d48fb2c6 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -56,7 +56,7 @@ __setup("apc=", apc_setup);
  * CPU idle callback function
  * See .../arch/sparc/kernel/process.c
  */
-void apc_swift_idle(void)
+static void apc_swift_idle(void)
 {
 #ifdef APC_DEBUG_LED
         set_auxio(0x00, AUXIO_LED); 
@@ -85,54 +85,70 @@ static int apc_release(struct inode *inode, struct file *f)
         return 0;
 }
 
-static int apc_ioctl(struct inode *inode, struct file *f, 
-                     unsigned int cmd, unsigned long __arg)
+static long apc_ioctl(struct file *f, unsigned int cmd, unsigned long __arg)
 {
         __u8 inarg, __user *arg;
 
         arg = (__u8 __user *) __arg;
+
+        lock_kernel();
+
         switch (cmd) {
         case APCIOCGFANCTL:
-                if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg))
-                                return -EFAULT;
+                if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg)) {
+                        unlock_kernel();
+                        return -EFAULT;
+                }
                 break;
 
         case APCIOCGCPWR:
-                if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg))
+                if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg)) {
+                        unlock_kernel();
                         return -EFAULT;
+                }
                 break;
 
         case APCIOCGBPORT:
-                if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg))
+                if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg)) {
+                        unlock_kernel();
                         return -EFAULT;
+                }
                 break;
 
         case APCIOCSFANCTL:
-                if (get_user(inarg, arg))
+                if (get_user(inarg, arg)) {
+                        unlock_kernel();
                         return -EFAULT;
+                }
                 apc_writeb(inarg & APC_REGMASK, APC_FANCTL_REG);
                 break;
         case APCIOCSCPWR:
-                if (get_user(inarg, arg))
+                if (get_user(inarg, arg)) {
+                        unlock_kernel();
                         return -EFAULT;
+                }
                 apc_writeb(inarg & APC_REGMASK, APC_CPOWER_REG);
                 break;
         case APCIOCSBPORT:
-                if (get_user(inarg, arg))
+                if (get_user(inarg, arg)) {
+                        unlock_kernel();
                         return -EFAULT;
+                }
                 apc_writeb(inarg & APC_BPMASK, APC_BPORT_REG);
                 break;
         default:
+                unlock_kernel();
                 return -EINVAL;
         };
 
+        unlock_kernel();
         return 0;
 }
 
 static const struct file_operations apc_fops = {
-        .ioctl =        apc_ioctl,
-        .open =         apc_open,
-        .release =      apc_release,
+        .unlocked_ioctl =       apc_ioctl,
+        .open =                 apc_open,
+        .release =              apc_release,
 };
 
 static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops };
diff --git a/arch/sparc/kernel/asm-offsets.c b/arch/sparc/kernel/asm-offsets.c
index cd3f7694e9b9..b5bb99ed892c 100644
--- a/arch/sparc/kernel/asm-offsets.c
+++ b/arch/sparc/kernel/asm-offsets.c
@@ -18,18 +18,6 @@ int foo(void)
 {
         DEFINE(AOFF_task_thread, offsetof(struct task_struct, thread));
         BLANK();
-        /* XXX This is the stuff for sclow.S, kill it. */
-        DEFINE(AOFF_task_pid, offsetof(struct task_struct, pid));
-        DEFINE(AOFF_task_uid, offsetof(struct task_struct, uid));
-        DEFINE(AOFF_task_gid, offsetof(struct task_struct, gid));
-        DEFINE(AOFF_task_euid, offsetof(struct task_struct, euid));
-        DEFINE(AOFF_task_egid, offsetof(struct task_struct, egid));
-        /* DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); */
-        DEFINE(ASIZ_task_uid,   sizeof(current->uid));
-        DEFINE(ASIZ_task_gid,   sizeof(current->gid));
-        DEFINE(ASIZ_task_euid,  sizeof(current->euid));
-        DEFINE(ASIZ_task_egid,  sizeof(current->egid));
-        BLANK();
         DEFINE(AOFF_thread_fork_kpsr,
                         offsetof(struct thread_struct, fork_kpsr));
         BLANK();
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
index 92c6fc07e59c..97294232259c 100644
--- a/arch/sparc/kernel/ebus.c
+++ b/arch/sparc/kernel/ebus.c
@@ -69,7 +69,7 @@ static inline unsigned long ebus_alloc(size_t size)
 
 /*
  */
-int __init ebus_blacklist_irq(const char *name)
+static int __init ebus_blacklist_irq(const char *name)
 {
         struct ebus_device_irq *dp;
 
@@ -83,8 +83,8 @@ int __init ebus_blacklist_irq(const char *name)
         return 0;
 }
 
-void __init fill_ebus_child(struct device_node *dp,
-                            struct linux_ebus_child *dev)
+static void __init fill_ebus_child(struct device_node *dp,
+                                   struct linux_ebus_child *dev)
 {
         const int *regs;
         const int *irqs;
@@ -144,7 +144,8 @@ void __init fill_ebus_child(struct device_node *dp,
         }
 }
 
-void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *dev)
+static void __init fill_ebus_device(struct device_node *dp,
+                                    struct linux_ebus_device *dev)
 {
         const struct linux_prom_registers *regs;
         struct linux_ebus_child *child;
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 4bcfe54f878d..e8cdf715a546 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -19,6 +19,7 @@
 #include <asm/vaddrs.h>
 #include <asm/memreg.h>
 #include <asm/page.h>
+#include <asm/pgtable.h>
 #ifdef CONFIG_SUN4
 #include <asm/pgtsun4.h>
 #else
@@ -1195,8 +1196,9 @@ sys_rt_sigreturn:
         be      1f
          nop
 
+        add     %sp, STACKFRAME_SZ, %o0
         call    syscall_trace
-         nop
+         mov    1, %o1
 
 1:
         /* We are returning to a signal handler. */
@@ -1286,8 +1288,12 @@ linux_fast_syscall:
          mov    %i3, %o3
 
 linux_syscall_trace:
+        add     %sp, STACKFRAME_SZ, %o0
         call    syscall_trace
-         nop
+         mov    0, %o1
+        cmp     %o0, 0
+        bne     3f
+         mov    -ENOSYS, %o0
         mov     %i0, %o0
         mov     %i1, %o1
         mov     %i2, %o2
@@ -1317,7 +1323,6 @@ linux_sparc_syscall:
         bne     linux_fast_syscall
          /* Just do first insn from SAVE_ALL in the delay slot */
 
-        .globl  syscall_is_too_hard
 syscall_is_too_hard:
         SAVE_ALL_HEAD
          rd     %wim, %l3
@@ -1337,6 +1342,7 @@ syscall_is_too_hard:
         call    %l7
          mov    %i5, %o5
 
+3:
         st      %o0, [%sp + STACKFRAME_SZ + PT_I0]
 
 ret_sys_call:
@@ -1374,6 +1380,8 @@ ret_sys_call:
          st     %l2, [%sp + STACKFRAME_SZ + PT_NPC]
 
 linux_syscall_trace2:
+        add     %sp, STACKFRAME_SZ, %o0
+        mov     1, %o1
         call    syscall_trace
          add    %l1, 0x4, %l2                   /* npc = npc+4 */
         st      %l1, [%sp + STACKFRAME_SZ + PT_PC]
@@ -1544,8 +1552,7 @@ kgdb_trap_low:
 #endif
 
         .align  4
-        .globl  __handle_exception, flush_patch_exception
-__handle_exception:
+        .globl  flush_patch_exception
 flush_patch_exception:
         FLUSH_ALL_KERNEL_WINDOWS;
         ldd     [%o0], %o6
diff --git a/arch/sparc/kernel/etrap.S b/arch/sparc/kernel/etrap.S
index f37d961d67a6..e806fcdc46db 100644
--- a/arch/sparc/kernel/etrap.S
+++ b/arch/sparc/kernel/etrap.S
@@ -228,7 +228,6 @@ tsetup_mmu_patchme:
          */
 #define glob_tmp     g1
 
-        .globl  tsetup_sun4c_stackchk
 tsetup_sun4c_stackchk:
         /* Done by caller: andcc %sp, 0x7, %g0 */
         bne     trap_setup_user_stack_is_bolixed
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 3bfd6085a91d..50d9a16af795 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -32,7 +32,6 @@
  */
 
         .align 4
-        .globl  cputyp
 cputyp:
         .word   1
 
@@ -1280,7 +1279,6 @@ halt_me:
  * gets initialized in c-code so all routines can use it.
  */
 
-        .globl  prom_vector_p
 prom_vector_p:
                 .word 0
 
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 7220562cdb34..fc511f3c4c18 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -24,7 +24,7 @@ static struct idprom idprom_buffer;
  * of the Sparc CPU and have a meaningful IDPROM machtype value that we
  * know about.  See asm-sparc/machines.h for empirical constants.
  */
-struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
+static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
 /* First, Sun4's */
 { "Sun 4/100 Series", (SM_SUN4 | SM_4_110) },
 { "Sun 4/200 Series", (SM_SUN4 | SM_4_260) },
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 7b17522f59bf..487960919f1f 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -49,13 +49,16 @@
 
 #define mmu_inval_dma_area(p, l)        /* Anton pulled it out for 2.4.0-xx */
 
-struct resource *_sparc_find_resource(struct resource *r, unsigned long);
+static struct resource *_sparc_find_resource(struct resource *r,
+                                             unsigned long);
 
 static void __iomem *_sparc_ioremap(struct resource *res, u32 bus, u32 pa, int sz);
 static void __iomem *_sparc_alloc_io(unsigned int busno, unsigned long phys,
     unsigned long size, char *name);
 static void _sparc_free_io(struct resource *res);
 
+static void register_proc_sparc_ioport(void);
+
 /* This points to the next to use virtual memory for DVMA mappings */
 static struct resource _sparc_dvma = {
         .name = "sparc_dvma", .start = DVMA_VADDR, .end = DVMA_END - 1
@@ -539,8 +542,6 @@ void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp)
 
 int __init sbus_arch_preinit(void)
 {
-        extern void register_proc_sparc_ioport(void);
-
         register_proc_sparc_ioport();
 
 #ifdef CONFIG_SUN4
@@ -853,8 +854,8 @@ _sparc_io_get_info(char *buf, char **start, off_t fpos, int length, int *eof,
  * XXX Too slow. Can have 8192 DVMA pages on sun4m in the worst case.
  * This probably warrants some sort of hashing.
  */
-struct resource *
-_sparc_find_resource(struct resource *root, unsigned long hit)
+static struct resource *_sparc_find_resource(struct resource *root,
+                                             unsigned long hit)
 {
         struct resource *tmp;
 
@@ -865,7 +866,7 @@ _sparc_find_resource(struct resource *root, unsigned long hit)
         return NULL;
 }
 
-void register_proc_sparc_ioport(void)
+static void register_proc_sparc_ioport(void)
 {
 #ifdef CONFIG_PROC_FS
         create_proc_read_entry("io_map",0,NULL,_sparc_io_get_info,&sparc_iomap);
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index 087390b092b0..93e1d1c65290 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -154,7 +154,7 @@ void (*sparc_init_timers)(irq_handler_t ) =
 struct irqaction static_irqaction[MAX_STATIC_ALLOC];
 int static_irq_count;
 
-struct {
+static struct {
         struct irqaction *action;
         int flags;
 } sparc_irq[NR_IRQS];
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index da48d248cc17..4bb430940a61 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -1,6 +1,6 @@
 /*  linux/arch/sparc/kernel/process.c
  *
- *  Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ *  Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
  *  Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
  */
 
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/ptrace.h>
@@ -177,6 +176,8 @@ void machine_power_off(void)
         machine_halt();
 }
 
+#if 0
+
 static DEFINE_SPINLOCK(sparc_backtrace_lock);
 
 void __show_backtrace(unsigned long fp)
@@ -196,7 +197,7 @@ void __show_backtrace(unsigned long fp)
                        rw->ins[4], rw->ins[5],
                        rw->ins[6],
                        rw->ins[7]);
-                print_symbol("%s\n", rw->ins[7]);
+                printk("%pS\n", (void *) rw->ins[7]);
                 rw = (struct reg_window *) rw->ins[6];
         }
         spin_unlock_irqrestore(&sparc_backtrace_lock, flags);
@@ -228,7 +229,6 @@ void smp_show_backtrace_all_cpus(void)
 }
 #endif
 
-#if 0
 void show_stackframe(struct sparc_stackf *sf)
 {
         unsigned long size;
@@ -264,14 +264,14 @@ void show_regs(struct pt_regs *r)
 
         printk("PSR: %08lx PC: %08lx NPC: %08lx Y: %08lx    %s\n",
                r->psr, r->pc, r->npc, r->y, print_tainted());
-        print_symbol("PC: <%s>\n", r->pc);
+        printk("PC: <%pS>\n", (void *) r->pc);
         printk("%%G: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
                r->u_regs[0], r->u_regs[1], r->u_regs[2], r->u_regs[3],
                r->u_regs[4], r->u_regs[5], r->u_regs[6], r->u_regs[7]);
         printk("%%O: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
                r->u_regs[8], r->u_regs[9], r->u_regs[10], r->u_regs[11],
                r->u_regs[12], r->u_regs[13], r->u_regs[14], r->u_regs[15]);
-        print_symbol("RPC: <%s>\n", r->u_regs[15]);
+        printk("RPC: <%pS>\n", (void *) r->u_regs[15]);
 
         printk("%%L: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
                rw->locals[0], rw->locals[1], rw->locals[2], rw->locals[3],
@@ -306,7 +306,7 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
                 rw = (struct reg_window *) fp;
                 pc = rw->ins[7];
                 printk("[%08lx : ", pc);
-                print_symbol("%s ] ", pc);
+                printk("%pS ] ", (void *) pc);
                 fp = rw->ins[6];
         } while (++count < 16);
         printk("\n");
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 81f3b929743f..20699c701412 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -21,6 +21,7 @@
 #include <linux/signal.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -450,21 +451,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
         return ret;
 }
 
-asmlinkage void syscall_trace(void)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
-        if (!test_thread_flag(TIF_SYSCALL_TRACE))
-                return;
-        if (!(current->ptrace & PT_PTRACED))
-                return;
-        ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-                                 ? 0x80 : 0));
-        /*
-         * this isn't the same as continuing with a signal, but it will do
-         * for normal use.  strace only continues with a signal if the
-         * stopping signal is not SIGTRAP.  -brl
-         */
-        if (current->exit_code) {
-                send_sig (current->exit_code, current, 1);
-                current->exit_code = 0;
+        int ret = 0;
+
+        if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+                if (syscall_exit_p)
+                        tracehook_report_syscall_exit(regs, 0);
+                else
+                        ret = tracehook_report_syscall_entry(regs);
         }
+
+        return ret;
 }
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index ce30082ab266..4da2e1f66290 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -69,12 +69,13 @@ ret_trap_lockless_ipi:
 
         ld      [%curptr + TI_FLAGS], %g2
 signal_p:
-        andcc   %g2, (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %g0
+        andcc   %g2, _TIF_DO_NOTIFY_RESUME_MASK, %g0
         bz,a    ret_trap_continue
          ld     [%sp + STACKFRAME_SZ + PT_PSR], %t_psr
 
+        mov     %g2, %o2
         mov     %l5, %o1
-        call    do_signal
+        call    do_notify_resume
          add    %sp, STACKFRAME_SZ, %o0 ! pt_regs ptr
 
         /* Fall through. */
@@ -224,8 +225,6 @@ ret_trap_user_stack_is_bolixed:
         b       signal_p
          ld     [%curptr + TI_FLAGS], %g2
 
-
-        .globl  sun4c_rett_stackchk
 sun4c_rett_stackchk:
         be      1f
          and    %fp, 0xfff, %g1         ! delay slot
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index a0ea0bc6f471..9e451b21202e 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -67,7 +67,7 @@ struct screen_info screen_info = {
 extern unsigned long trapbase;
 
 /* Pretty sick eh? */
-void prom_sync_me(void)
+static void prom_sync_me(void)
 {
         unsigned long prom_tbr, flags;
 
@@ -97,7 +97,7 @@ void prom_sync_me(void)
         return;
 }
 
-unsigned int boot_flags __initdata = 0;
+static unsigned int boot_flags __initdata = 0;
 #define BOOTME_DEBUG  0x1
 
 /* Exported for mm/init.c:paging_init. */
diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c
index 3fd1df9f9ba7..c94f91c8b6e0 100644
--- a/arch/sparc/kernel/signal.c
+++ b/arch/sparc/kernel/signal.c
@@ -18,6 +18,7 @@
 #include <linux/smp.h>
 #include <linux/binfmts.h>      /* do_coredum */
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -513,7 +514,7 @@ static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
+static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 {
         struct k_sigaction ka;
         int restart_syscall;
@@ -552,6 +553,8 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
                  */
                 if (test_thread_flag(TIF_RESTORE_SIGMASK))
                         clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+                tracehook_signal_handler(signr, &info, &ka, regs, 0);
                 return;
         }
         if (restart_syscall &&
@@ -579,6 +582,17 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
         }
 }
 
+void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0,
+                      unsigned long thread_info_flags)
+{
+        if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+                do_signal(regs, orig_i0);
+        if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+                clear_thread_flag(TIF_NOTIFY_RESUME);
+                tracehook_notify_resume(regs);
+        }
+}
+
 asmlinkage int
 do_sys_sigstack(struct sigstack __user *ssptr, struct sigstack __user *ossptr,
                 unsigned long sp)
diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c
index 6724ab90f82b..1619ec15c099 100644
--- a/arch/sparc/kernel/smp.c
+++ b/arch/sparc/kernel/smp.c
@@ -35,13 +35,9 @@
 
 #include "irq.h"
 
-int smp_num_cpus = 1;
 volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
 unsigned char boot_cpu_id = 0;
 unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
-int smp_activated = 0;
-volatile int __cpu_number_map[NR_CPUS];
-volatile int __cpu_logical_map[NR_CPUS];
 
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
@@ -55,9 +51,6 @@ cpumask_t smp_commenced_mask = CPU_MASK_NONE;
  * instruction which is much better...
  */
 
-/* Used to make bitops atomic */
-unsigned char bitops_spinlock = 0;
-
 void __cpuinit smp_store_cpu_info(int id)
 {
         int cpu_node;
diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c
index c6ac9fc52563..340fc395fe2d 100644
--- a/arch/sparc/kernel/sun4c_irq.c
+++ b/arch/sparc/kernel/sun4c_irq.c
@@ -68,7 +68,8 @@ unsigned char *interrupt_enable = NULL;
 
 static int sun4c_pil_map[] = { 0, 1, 2, 3, 5, 7, 8, 9 };
 
-unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
+static unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev,
+                                       unsigned int sbint)
 {
         if (sbint >= sizeof(sun4c_pil_map)) {
                 printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index 8ac5661cafff..1290b5998f83 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -52,13 +52,13 @@ extern struct irqaction static_irqaction[MAX_STATIC_ALLOC];
 extern int static_irq_count;
 unsigned char cpu_leds[32];
 #ifdef CONFIG_SMP
-unsigned char sbus_tid[32];
+static unsigned char sbus_tid[32];
 #endif
 
 static struct irqaction *irq_action[NR_IRQS];
 extern spinlock_t irq_action_lock;
 
-struct sbus_action {
+static struct sbus_action {
         struct irqaction *action;
         /* For SMP this needs to be extended */
 } *sbus_actions;
@@ -267,7 +267,8 @@ unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq)
                 return irq;
 }
 
-unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
+static unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev,
+                                       unsigned int sbint)
 {
         if (sbint >= sizeof(sbus_to_pil)) {
                 printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index b92d6d2d5b04..94e02de960ea 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -154,7 +154,8 @@ static unsigned long irq_mask[] = {
 
 static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 };
 
-unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint) 
+static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev,
+                                       unsigned int sbint)
 {
         if (sbint >= sizeof(sun4m_pil_map)) {
                 printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
@@ -163,7 +164,7 @@ unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
         return sun4m_pil_map[sbint] | 0x30;
 }
 
-inline unsigned long sun4m_get_irqmask(unsigned int irq)
+static unsigned long sun4m_get_irqmask(unsigned int irq)
 {
         unsigned long mask;
     
@@ -281,7 +282,7 @@ static void sun4m_set_udt(int cpu)
 #define TIMER_IRQ       (OBIO_INTR | 10)
 #define PROFILE_IRQ     (OBIO_INTR | 14)
 
-struct sun4m_timer_regs *sun4m_timers;
+static struct sun4m_timer_regs *sun4m_timers;
 unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
 
 static void sun4m_clear_clock_irq(void)
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index ffb875aacb7e..406ac1abc83a 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -244,8 +244,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-                    unsigned long arg3, unsigned long arg4, unsigned long arg5)
+static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
+                             unsigned long arg2, unsigned long arg3,
+                             unsigned long arg4, unsigned long arg5)
 {
                 register int ncpus = SUN4M_NCPUS;
                 unsigned long flags;
@@ -344,7 +345,7 @@ static void __init smp_setup_percpu_timer(void)
                 enable_pil_irq(14);
 }
 
-void __init smp4m_blackbox_id(unsigned *addr)
+static void __init smp4m_blackbox_id(unsigned *addr)
 {
         int rd = *addr & 0x3e000000;
         int rs1 = rd >> 11;
@@ -354,7 +355,7 @@ void __init smp4m_blackbox_id(unsigned *addr)
         addr[2] = 0x80082003 | rd | rs1;        /* and reg, 3, reg */
 }
 
-void __init smp4m_blackbox_current(unsigned *addr)
+static void __init smp4m_blackbox_current(unsigned *addr)
 {
         int rd = *addr & 0x3e000000;
         int rs1 = rd >> 11;
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index 3c6b49a53ae8..4d73421559c3 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -97,7 +97,7 @@ asmlinkage int sparc_pipe(struct pt_regs *regs)
         int fd[2];
         int error;
 
-        error = do_pipe(fd);
+        error = do_pipe_flags(fd, 0);
         if (error)
                 goto out;
         regs->u_regs[UREG_I1] = fd[1];
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 5a7c4c8345c3..e1b9233b90ab 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -80,4 +80,5 @@ sys_call_table:
 /*300*/ .long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 /*305*/ .long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-/*315*/ .long sys_timerfd_settime, sys_timerfd_gettime
+/*315*/ .long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 53caacbb3982..ab3dd0b257d3 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -46,7 +46,7 @@
 #include "irq.h"
 
 DEFINE_SPINLOCK(rtc_lock);
-enum sparc_clock_type sp_clock_typ;
+static enum sparc_clock_type sp_clock_typ;
 DEFINE_SPINLOCK(mostek_lock);
 void __iomem *mstk48t02_regs = NULL;
 static struct mostek48t08 __iomem *mstk48t08_regs = NULL;
@@ -366,7 +366,7 @@ static int __init clock_init(void)
 fs_initcall(clock_init);
 #endif /* !CONFIG_SUN4 */
 
-void __init sbus_time_init(void)
+static void __init sbus_time_init(void)
 {
 
         BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c
index 978e9d85949e..5d45d5fd8c99 100644
--- a/arch/sparc/kernel/traps.c
+++ b/arch/sparc/kernel/traps.c
@@ -1,7 +1,7 @@
 /*
  * arch/sparc/kernel/traps.c
  *
- * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1995, 2008 David S. Miller (davem@davemloft.net)
  * Copyright 2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -11,7 +11,6 @@
 
 #include <linux/sched.h>  /* for jiffies */
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
@@ -33,9 +32,6 @@ struct trap_trace_entry {
         unsigned long type;
 };
 
-int trap_curbuf = 0;
-struct trap_trace_entry trapbuf[1024];
-
 void syscall_trace_entry(struct pt_regs *regs)
 {
         printk("%s[%d]: ", current->comm, task_pid_nr(current));
@@ -72,7 +68,7 @@ void sun4d_nmi(struct pt_regs *regs)
         prom_halt();
 }
 
-void instruction_dump (unsigned long *pc)
+static void instruction_dump(unsigned long *pc)
 {
         int i;
         
@@ -119,8 +115,8 @@ void die_if_kernel(char *str, struct pt_regs *regs)
                       count++ < 30                              &&
                       (((unsigned long) rw) >= PAGE_OFFSET)     &&
                       !(((unsigned long) rw) & 0x7)) {
-                        printk("Caller[%08lx]", rw->ins[7]);
-                        print_symbol(": %s\n", rw->ins[7]);
+                        printk("Caller[%08lx]: %pS\n", rw->ins[7],
+                               (void *) rw->ins[7]);
                         rw = (struct reg_window *)rw->ins[6];
                 }
         }
@@ -479,10 +475,6 @@ void do_BUG(const char *file, int line)
 
 extern void sparc_cpu_startup(void);
 
-int linux_smp_still_initting;
-unsigned int thiscpus_tbr;
-int thiscpus_mid;
-
 void trap_init(void)
 {
         extern void thread_info_offsets_are_bolixed_pete(void);
diff --git a/arch/sparc/kernel/wof.S b/arch/sparc/kernel/wof.S
index 4bce38dfe3c5..3bbcd8dc9abf 100644
--- a/arch/sparc/kernel/wof.S
+++ b/arch/sparc/kernel/wof.S
@@ -306,7 +306,6 @@ spwin_bad_ustack_from_kernel:
  * As noted above %curptr cannot be touched by this routine at all.
  */
 
-        .globl  spwin_sun4c_stackchk
 spwin_sun4c_stackchk:
         /* LOCATION: Window to be saved on the stack */
 
diff --git a/arch/sparc/kernel/wuf.S b/arch/sparc/kernel/wuf.S
index 82e5145b0f77..779ff750603d 100644
--- a/arch/sparc/kernel/wuf.S
+++ b/arch/sparc/kernel/wuf.S
@@ -243,7 +243,6 @@ fwin_user_finish_up:
          */
 
         .align  4
-        .globl  sun4c_fwin_stackchk
 sun4c_fwin_stackchk:
         /* LOCATION: Window 'W' */
 
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index 0a3cd8f6cfe4..3604c2e86709 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -451,7 +451,7 @@ asmlinkage void do_sun4c_fault(struct pt_regs *regs, int text_fault, int write,
 }
 
 /* This always deals with user addresses. */
-inline void force_user_fault(unsigned long address, int write)
+static void force_user_fault(unsigned long address, int write)
 {
         struct vm_area_struct *vma;
         struct task_struct *tsk = current;
diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c
index 7794ecb896e3..e103f1bb3777 100644
--- a/arch/sparc/mm/init.c
+++ b/arch/sparc/mm/init.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
+#include <linux/pagemap.h>
 
 #include <asm/system.h>
 #include <asm/vac-ops.h>
@@ -128,7 +129,7 @@ unsigned long calc_highpages(void)
         return nr;
 }
 
-unsigned long calc_max_low_pfn(void)
+static unsigned long calc_max_low_pfn(void)
 {
         int i;
         unsigned long tmp = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
@@ -292,7 +293,7 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
  *
  * We simply copy the 2.4 implementation for now.
  */
-int pgt_cache_water[2] = { 25, 50 };
+static int pgt_cache_water[2] = { 25, 50 };
 
 void check_pgt_cache(void)
 {
@@ -356,8 +357,6 @@ void __init paging_init(void)
         device_scan();
 }
 
-struct cache_palias *sparc_aliases;
-
 static void __init taint_real_pages(void)
 {
         int i;
@@ -375,7 +374,7 @@ static void __init taint_real_pages(void)
         }
 }
 
-void map_high_region(unsigned long start_pfn, unsigned long end_pfn)
+static void map_high_region(unsigned long start_pfn, unsigned long end_pfn)
 {
         unsigned long tmp;
 
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 23d3291a3e81..ee30462598fc 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -50,7 +50,7 @@
 #include <asm/btfixup.h>
 
 enum mbus_module srmmu_modtype;
-unsigned int hwbug_bitmask;
+static unsigned int hwbug_bitmask;
 int vac_cache_size;
 int vac_line_size;
 
@@ -60,7 +60,7 @@ extern unsigned long last_valid_pfn;
 
 extern unsigned long page_kernel;
 
-pgd_t *srmmu_swapper_pg_dir;
+static pgd_t *srmmu_swapper_pg_dir;
 
 #ifdef CONFIG_SMP
 #define FLUSH_BEGIN(mm)
@@ -83,12 +83,12 @@ BTFIXUPDEF_CALL(void, local_flush_page_for_dma, unsigned long)
 char *srmmu_name;
 
 ctxd_t *srmmu_ctx_table_phys;
-ctxd_t *srmmu_context_table;
+static ctxd_t *srmmu_context_table;
 
 int viking_mxcc_present;
 static DEFINE_SPINLOCK(srmmu_context_spinlock);
 
-int is_hypersparc;
+static int is_hypersparc;
 
 /*
  * In general all page table modifications should use the V8 atomic
@@ -112,11 +112,11 @@ static inline int srmmu_device_memory(unsigned long x)
         return ((x & 0xF0000000) != 0);
 }
 
-int srmmu_cache_pagetables;
+static int srmmu_cache_pagetables;
 
 /* these will be initialized in srmmu_nocache_calcsize() */
-unsigned long srmmu_nocache_size;
-unsigned long srmmu_nocache_end;
+static unsigned long srmmu_nocache_size;
+static unsigned long srmmu_nocache_end;
 
 /* 1 bit <=> 256 bytes of nocache <=> 64 PTEs */
 #define SRMMU_NOCACHE_BITMAP_SHIFT (PAGE_SHIFT - 4)
@@ -324,7 +324,7 @@ static unsigned long __srmmu_get_nocache(int size, int align)
         return (SRMMU_NOCACHE_VADDR + (offset << SRMMU_NOCACHE_BITMAP_SHIFT));
 }
 
-unsigned inline long srmmu_get_nocache(int size, int align)
+static unsigned long srmmu_get_nocache(int size, int align)
 {
         unsigned long tmp;
 
@@ -336,7 +336,7 @@ unsigned inline long srmmu_get_nocache(int size, int align)
         return tmp;
 }
 
-void srmmu_free_nocache(unsigned long vaddr, int size)
+static void srmmu_free_nocache(unsigned long vaddr, int size)
 {
         int offset;
 
@@ -369,7 +369,8 @@ void srmmu_free_nocache(unsigned long vaddr, int size)
         bit_map_clear(&srmmu_nocache_map, offset, size);
 }
 
-void srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned long end);
+static void srmmu_early_allocate_ptable_skeleton(unsigned long start,
+                                                 unsigned long end);
 
 extern unsigned long probe_memory(void);        /* in fault.c */
 
@@ -377,7 +378,7 @@ extern unsigned long probe_memory(void);	/* in fault.c */
  * Reserve nocache dynamically proportionally to the amount of
  * system RAM. -- Tomas Szepe <szepe@pinerecords.com>, June 2002
  */
-void srmmu_nocache_calcsize(void)
+static void srmmu_nocache_calcsize(void)
 {
         unsigned long sysmemavail = probe_memory() / 1024;
         int srmmu_nocache_npages;
@@ -398,7 +399,7 @@ void srmmu_nocache_calcsize(void)
         srmmu_nocache_end = SRMMU_NOCACHE_VADDR + srmmu_nocache_size;
 }
 
-void __init srmmu_nocache_init(void)
+static void __init srmmu_nocache_init(void)
 {
         unsigned int bitmap_bits;
         pgd_t *pgd;
@@ -645,7 +646,7 @@ static void srmmu_unmapiorange(unsigned long virt_addr, unsigned int len)
  * mappings on the kernel stack without any special code as we did
  * need on the sun4c.
  */
-struct thread_info *srmmu_alloc_thread_info(void)
+static struct thread_info *srmmu_alloc_thread_info(void)
 {
         struct thread_info *ret;
 
@@ -1045,13 +1046,14 @@ extern void hypersparc_setup_blockops(void);
  *       around 8mb mapped for us.
  */
 
-void __init early_pgtable_allocfail(char *type)
+static void __init early_pgtable_allocfail(char *type)
 {
         prom_printf("inherit_prom_mappings: Cannot alloc kernel %s.\n", type);
         prom_halt();
 }
 
-void __init srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned long end)
+static void __init srmmu_early_allocate_ptable_skeleton(unsigned long start,
+                                                        unsigned long end)
 {
         pgd_t *pgdp;
         pmd_t *pmdp;
@@ -1081,7 +1083,8 @@ void __init srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned l
         }
 }
 
-void __init srmmu_allocate_ptable_skeleton(unsigned long start, unsigned long end)
+static void __init srmmu_allocate_ptable_skeleton(unsigned long start,
+                                                  unsigned long end)
 {
         pgd_t *pgdp;
         pmd_t *pmdp;
@@ -1116,7 +1119,8 @@ void __init srmmu_allocate_ptable_skeleton(unsigned long start, unsigned long en
  * looking at the prom's page table directly which is what most
  * other OS's do.  Yuck... this is much better.
  */
-void __init srmmu_inherit_prom_mappings(unsigned long start,unsigned long end)
+static void __init srmmu_inherit_prom_mappings(unsigned long start,
+                                               unsigned long end)
 {
         pgd_t *pgdp;
         pmd_t *pmdp;
@@ -1348,8 +1352,7 @@ void __init srmmu_paging_init(void)
                 zones_size[ZONE_HIGHMEM] = npages;
                 zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
 
-                free_area_init_node(0, &contig_page_data, zones_size,
-                                    pfn_base, zholes_size);
+                free_area_init_node(0, zones_size, pfn_base, zholes_size);
         }
 }
 
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index 2375fe9dc312..d1782f6368be 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2123,8 +2123,7 @@ void __init sun4c_paging_init(void)
                 zones_size[ZONE_HIGHMEM] = npages;
                 zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
 
-                free_area_init_node(0, &contig_page_data, zones_size,
-                                    pfn_base, zholes_size);
+                free_area_init_node(0, zones_size, pfn_base, zholes_size);
         }
 
         cnt = 0;
diff --git a/arch/sparc/mm/tsunami.S b/arch/sparc/mm/tsunami.S
index db0d6de33a87..4e55e8f76648 100644
--- a/arch/sparc/mm/tsunami.S
+++ b/arch/sparc/mm/tsunami.S
@@ -93,7 +93,6 @@ tsunami_flush_tlb_page_out:
         ldd     [src + offset + 0x00], t2; \
         std     t2, [dst + offset + 0x00];
 
-        .globl  tsunami_copy_1page
 tsunami_copy_1page:
 /* NOTE: This routine has to be shorter than 70insns --jj */
         or      %g0, (PAGE_SIZE >> 8), %g1
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index fca9246470b1..923a98959fa7 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -16,6 +16,8 @@ config SPARC64
         select HAVE_IDE
         select HAVE_LMB
         select HAVE_ARCH_KGDB
+        select USE_GENERIC_SMP_HELPERS if SMP
+        select HAVE_ARCH_TRACEHOOK
 
 config GENERIC_TIME
         bool
@@ -81,6 +83,10 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
         bool
         def_bool y
 
+source "init/Kconfig"
+
+menu "Processor type and features"
+
 choice
         prompt "Kernel page size"
         default SPARC64_PAGE_SIZE_8KB
@@ -93,19 +99,11 @@ config SPARC64_PAGE_SIZE_8KB
           8KB and 64KB work quite well, since SPARC ELF sections
           provide for up to 64KB alignment.
 
-          Therefore, 512KB and 4MB are for expert hackers only.
-
           If you don't know what to do, choose 8KB.
 
 config SPARC64_PAGE_SIZE_64KB
         bool "64KB"
 
-config SPARC64_PAGE_SIZE_512KB
-        bool "512KB"
-
-config SPARC64_PAGE_SIZE_4MB
-        bool "4MB"
-
 endchoice
 
 config SECCOMP
@@ -136,14 +134,10 @@ config HOTPLUG_CPU
           can be controlled through /sys/devices/system/cpu/cpu#.
           Say N if you want to disable CPU hotplug.
 
-source "init/Kconfig"
-
 config GENERIC_HARDIRQS
         bool
         default y
 
-menu "General machine setup"
-
 source "kernel/time/Kconfig"
 
 config SMP
@@ -225,11 +219,10 @@ config HUGETLB_PAGE_SIZE_4MB
         bool "4MB"
 
 config HUGETLB_PAGE_SIZE_512K
-        depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB
         bool "512K"
 
 config HUGETLB_PAGE_SIZE_64K
-        depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64KB
+        depends on !SPARC64_PAGE_SIZE_64KB
         bool "64K"
 
 endchoice
diff --git a/arch/sparc64/Makefile b/arch/sparc64/Makefile
index 4b8f2b084c21..b785a395b12f 100644
--- a/arch/sparc64/Makefile
+++ b/arch/sparc64/Makefile
@@ -9,7 +9,9 @@
 
 CHECKFLAGS      += -D__sparc__ -D__sparc_v9__ -m64
 
-CPPFLAGS_vmlinux.lds += -Usparc
+# Undefine sparc when processing vmlinux.lds - it is used
+# And teach CPP we are doing 64 bit builds (for this case)
+CPPFLAGS_vmlinux.lds += -m64 -Usparc
 
 LDFLAGS         := -m elf64_sparc
 
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 76eb832527f2..82cab5cc8070 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Fri May 16 13:36:07 2008
+# Linux kernel version: 2.6.26
+# Fri Jul 18 00:47:07 2008
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -22,18 +22,6 @@ CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_SPARC64_PAGE_SIZE_8KB=y
-# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
-# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
-# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
-CONFIG_SECCOMP=y
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_HOTPLUG_CPU=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -105,6 +93,7 @@ CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,6 +110,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -136,11 +126,21 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-CONFIG_GENERIC_HARDIRQS=y
 
 #
-# General machine setup
+# Processor type and features
 #
+CONFIG_SPARC64_PAGE_SIZE_8KB=y
+# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
+CONFIG_SECCOMP=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -342,6 +342,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -366,6 +368,7 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_CDROM_PKTCDVD_WCACHE=y
 CONFIG_ATA_OVER_ETH=m
 CONFIG_SUNVDC=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
@@ -379,6 +382,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -429,8 +433,6 @@ CONFIG_BLK_DEV_ALI15X3=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -504,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SUNESP is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -529,6 +532,10 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -745,7 +752,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_N2RNG=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -759,38 +767,58 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -856,6 +884,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -985,15 +1014,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SUN_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1010,21 +1031,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 CONFIG_SND_ALI5451=m
@@ -1084,37 +1101,14 @@ CONFIG_SND_ALI5451=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# ALSA Sparc devices
-#
+CONFIG_SND_SPARC=y
 # CONFIG_SND_SUN_AMD7930 is not set
 CONFIG_SND_SUN_CS4231=m
 # CONFIG_SND_SUN_DBRI is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
@@ -1167,6 +1161,7 @@ CONFIG_USB_UHCI_HCD=m
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1226,6 +1221,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1420,6 +1416,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1486,6 +1488,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1527,6 +1533,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sparc64/kernel/central.c b/arch/sparc64/kernel/central.c
index b61b8dfb09cf..f2e87d0d7e1d 100644
--- a/arch/sparc64/kernel/central.c
+++ b/arch/sparc64/kernel/central.c
@@ -16,8 +16,8 @@
 #include <asm/fhc.h>
 #include <asm/starfire.h>
 
-struct linux_central *central_bus = NULL;
-struct linux_fhc *fhc_list = NULL;
+static struct linux_central *central_bus = NULL;
+static struct linux_fhc *fhc_list = NULL;
 
 #define IS_CENTRAL_FHC(__fhc)   ((__fhc) == central_bus->child)
 
@@ -79,9 +79,9 @@ static void adjust_regs(struct linux_prom_registers *regp, int nregs,
 }
 
 /* Apply probed fhc ranges to registers passed, if no ranges return. */
-void apply_fhc_ranges(struct linux_fhc *fhc,
-                      struct linux_prom_registers *regs,
-                      int nregs)
+static void apply_fhc_ranges(struct linux_fhc *fhc,
+                             struct linux_prom_registers *regs,
+                             int nregs)
 {
         if (fhc->num_fhc_ranges)
                 adjust_regs(regs, nregs, fhc->fhc_ranges,
@@ -89,8 +89,8 @@ void apply_fhc_ranges(struct linux_fhc *fhc,
 }
 
 /* Apply probed central ranges to registers passed, if no ranges return. */
-void apply_central_ranges(struct linux_central *central,
-                          struct linux_prom_registers *regs, int nregs)
+static void apply_central_ranges(struct linux_central *central,
+                                 struct linux_prom_registers *regs, int nregs)
 {
         if (central->num_central_ranges)
                 adjust_regs(regs, nregs, central->central_ranges,
diff --git a/arch/sparc64/kernel/compat_audit.c b/arch/sparc64/kernel/compat_audit.c
index c1979482aa92..c831b0a4e660 100644
--- a/arch/sparc64/kernel/compat_audit.c
+++ b/arch/sparc64/kernel/compat_audit.c
@@ -1,4 +1,4 @@
-#include <asm-sparc/unistd.h>
+#include <asm/unistd_32.h>
 
 unsigned sparc32_dir_class[] = {
 #include <asm-generic/audit_dir_write.h>
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index edb74f5a1186..d0fa5aa38934 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -159,7 +159,7 @@ static void ds_var_data(struct ds_info *dp,
                         struct ds_cap_state *cp,
                         void *buf, int len);
 
-struct ds_cap_state ds_states_template[] = {
+static struct ds_cap_state ds_states_template[] = {
         {
                 .service_id     = "md-update",
                 .data           = md_update_data,
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index c49d0388b793..4d58d7ce708d 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -401,7 +401,7 @@ static void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_de
         dev->ofdev.node = dp;
         dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
         dev->ofdev.dev.bus = &ebus_bus_type;
-        sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node);
+        dev_set_name(&dev->ofdev.dev, "ebus[%08x]", dp->node);
 
         /* Register with core */
         if (of_device_register(&dev->ofdev) != 0)
@@ -501,7 +501,7 @@ void __init ebus_init(void)
                 ebus->ofdev.node = dp;
                 ebus->ofdev.dev.parent = &pdev->dev;
                 ebus->ofdev.dev.bus = &ebus_bus_type;
-                sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus);
+                dev_set_name(&ebus->ofdev.dev, "ebus%d", num_ebus);
 
                 /* Register with core */
                 if (of_device_register(&ebus->ofdev) != 0)
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
index 32fbab620852..fc294a292899 100644
--- a/arch/sparc64/kernel/entry.h
+++ b/arch/sparc64/kernel/entry.h
@@ -22,8 +22,7 @@ extern void do_notify_resume(struct pt_regs *regs,
                              unsigned long orig_i0,
                              unsigned long thread_info_flags);
 
-extern asmlinkage void syscall_trace(struct pt_regs *regs,
-                                     int syscall_exit_p);
+extern asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p);
 
 extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
 
diff --git a/arch/sparc64/kernel/hvapi.c b/arch/sparc64/kernel/hvapi.c
index f34f5d6181ef..691760b5b012 100644
--- a/arch/sparc64/kernel/hvapi.c
+++ b/arch/sparc64/kernel/hvapi.c
@@ -34,8 +34,12 @@ static struct api_info api_table[] = {
         { .group = HV_GRP_LDOM,                                 },
         { .group = HV_GRP_SVC_CHAN,     .flags = FLAG_PRE_API   },
         { .group = HV_GRP_NCS,          .flags = FLAG_PRE_API   },
+        { .group = HV_GRP_RNG,                                  },
         { .group = HV_GRP_NIAG_PERF,    .flags = FLAG_PRE_API   },
         { .group = HV_GRP_FIRE_PERF,                            },
+        { .group = HV_GRP_N2_CPU,                               },
+        { .group = HV_GRP_NIU,                                  },
+        { .group = HV_GRP_VF_CPU,                               },
         { .group = HV_GRP_DIAG,         .flags = FLAG_PRE_API   },
 };
 
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index f3575a614fa2..53b19c8231a9 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -23,7 +23,7 @@
 #define IO_PAGE_SHIFT                   13
 #define IO_PAGE_SIZE                    (1UL << IO_PAGE_SHIFT)
 #define IO_PAGE_MASK                    (~(IO_PAGE_SIZE-1))
-#define IO_PAGE_ALIGN(addr)             (((addr)+IO_PAGE_SIZE-1)&IO_PAGE_MASK)
+#define IO_PAGE_ALIGN(addr)             ALIGN(addr, IO_PAGE_SIZE)
 
 #define IO_TSB_ENTRIES                  (128*1024)
 #define IO_TSB_SIZE                     (IO_TSB_ENTRIES * 8)
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index b441a26b73b0..c481673d249c 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -621,8 +621,9 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino)
 unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
 {
         struct irq_handler_data *data;
-        struct ino_bucket *bucket;
         unsigned long hv_err, cookie;
+        struct ino_bucket *bucket;
+        struct irq_desc *desc;
         unsigned int virt_irq;
 
         bucket = kzalloc(sizeof(struct ino_bucket), GFP_ATOMIC);
@@ -643,6 +644,13 @@ unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
         if (unlikely(!data))
                 return 0;
 
+        /* In order to make the LDC channel startup sequence easier,
+         * especially wrt. locking, we do not let request_irq() enable
+         * the interrupt.
+         */
+        desc = irq_desc + virt_irq;
+        desc->status |= IRQ_NOAUTOEN;
+
         set_irq_chip_data(virt_irq, data);
 
         /* Catch accidental accesses to these things.  IMAP/ICLR handling
diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c
index f43b5d755354..201a6e547e4a 100644
--- a/arch/sparc64/kernel/kprobes.c
+++ b/arch/sparc64/kernel/kprobes.c
@@ -478,9 +478,9 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
         return 0;
 }
 
-/* Called with kretprobe_lock held.  The value stored in the return
- * address register is actually 2 instructions before where the
- * callee will return to.  Sequences usually look something like this
+/* The value stored in the return address register is actually 2
+ * instructions before where the callee will return to.
+ * Sequences usually look something like this
  *
  *              call    some_function   <--- return register points here
  *               nop                    <--- call delay slot
@@ -512,8 +512,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
         unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
         INIT_HLIST_HEAD(&empty_rp);
-        spin_lock_irqsave(&kretprobe_lock, flags);
-        head = kretprobe_inst_table_head(current);
+        kretprobe_hash_lock(current, &head, &flags);
 
         /*
          * It is possible to have multiple instances associated with a given
@@ -553,7 +552,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
         regs->tnpc = orig_ret_address + 4;
 
         reset_current_kprobe();
-        spin_unlock_irqrestore(&kretprobe_lock, flags);
+        kretprobe_hash_unlock(current, &flags);
         preempt_enable_no_resched();
 
         hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/sparc64/kernel/ldc.c b/arch/sparc64/kernel/ldc.c
index 63969f610284..d68982330f66 100644
--- a/arch/sparc64/kernel/ldc.c
+++ b/arch/sparc64/kernel/ldc.c
@@ -1,6 +1,6 @@
 /* ldc.c: Logical Domain Channel link-layer protocol driver.
  *
- * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2007, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
@@ -23,8 +23,8 @@
 
 #define DRV_MODULE_NAME         "ldc"
 #define PFX DRV_MODULE_NAME     ": "
-#define DRV_MODULE_VERSION      "1.0"
-#define DRV_MODULE_RELDATE      "June 25, 2007"
+#define DRV_MODULE_VERSION      "1.1"
+#define DRV_MODULE_RELDATE      "July 22, 2008"
 
 static char version[] __devinitdata =
         DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@@ -1235,13 +1235,9 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
         unsigned long hv_err, flags;
         int err = -EINVAL;
 
-        spin_lock_irqsave(&lp->lock, flags);
-
-        if (!name)
-                goto out_err;
-
-        if (lp->state != LDC_STATE_INIT)
-                goto out_err;
+        if (!name ||
+            (lp->state != LDC_STATE_INIT))
+                return -EINVAL;
 
         snprintf(lp->rx_irq_name, LDC_IRQ_NAME_MAX, "%s RX", name);
         snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name);
@@ -1250,25 +1246,32 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
                           IRQF_SAMPLE_RANDOM | IRQF_SHARED,
                           lp->rx_irq_name, lp);
         if (err)
-                goto out_err;
+                return err;
 
         err = request_irq(lp->cfg.tx_irq, ldc_tx,
                           IRQF_SAMPLE_RANDOM | IRQF_SHARED,
                           lp->tx_irq_name, lp);
-        if (err)
-                goto out_free_rx_irq;
+        if (err) {
+                free_irq(lp->cfg.rx_irq, lp);
+                return err;
+        }
+
 
+        spin_lock_irqsave(&lp->lock, flags);
+
+        enable_irq(lp->cfg.rx_irq);
+        enable_irq(lp->cfg.tx_irq);
 
         lp->flags |= LDC_FLAG_REGISTERED_IRQS;
 
         err = -ENODEV;
         hv_err = sun4v_ldc_tx_qconf(lp->id, 0, 0);
         if (hv_err)
-                goto out_free_tx_irq;
+                goto out_free_irqs;
 
         hv_err = sun4v_ldc_tx_qconf(lp->id, lp->tx_ra, lp->tx_num_entries);
         if (hv_err)
-                goto out_free_tx_irq;
+                goto out_free_irqs;
 
         hv_err = sun4v_ldc_rx_qconf(lp->id, 0, 0);
         if (hv_err)
@@ -1304,14 +1307,11 @@ out_unmap_rx:
 out_unmap_tx:
         sun4v_ldc_tx_qconf(lp->id, 0, 0);
 
-out_free_tx_irq:
+out_free_irqs:
         lp->flags &= ~LDC_FLAG_REGISTERED_IRQS;
         free_irq(lp->cfg.tx_irq, lp);
-
-out_free_rx_irq:
         free_irq(lp->cfg.rx_irq, lp);
 
-out_err:
         spin_unlock_irqrestore(&lp->lock, flags);
 
         return err;
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index d569f60c24b8..4fd48ab7dda4 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -797,9 +797,9 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
         op->dev.parent = parent;
         op->dev.bus = &of_platform_bus_type;
         if (!parent)
-                strcpy(op->dev.bus_id, "root");
+                dev_set_name(&op->dev, "root");
         else
-                sprintf(op->dev.bus_id, "%08x", dp->node);
+                dev_set_name(&op->dev, "%08x", dp->node);
 
         if (of_device_register(op)) {
                 printk("%s: Could not register of device.\n",
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index d00a3656c287..55096195458f 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -408,7 +408,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
         dev->class = class >> 8;
         dev->revision = class & 0xff;
 
-        sprintf(dev->dev.bus_id, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+        dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
                 dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
 
         if (ofpci_verbose)
diff --git a/arch/sparc64/kernel/pci_msi.c b/arch/sparc64/kernel/pci_msi.c
index db5e8fd8f674..60c71e350212 100644
--- a/arch/sparc64/kernel/pci_msi.c
+++ b/arch/sparc64/kernel/pci_msi.c
@@ -120,9 +120,9 @@ static struct irq_chip msi_irq = {
         /* XXX affinity XXX */
 };
 
-int sparc64_setup_msi_irq(unsigned int *virt_irq_p,
-                          struct pci_dev *pdev,
-                          struct msi_desc *entry)
+static int sparc64_setup_msi_irq(unsigned int *virt_irq_p,
+                                 struct pci_dev *pdev,
+                                 struct msi_desc *entry)
 {
         struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
         const struct sparc64_msiq_ops *ops = pbm->msi_ops;
@@ -179,8 +179,8 @@ out_err:
         return err;
 }
 
-void sparc64_teardown_msi_irq(unsigned int virt_irq,
-                              struct pci_dev *pdev)
+static void sparc64_teardown_msi_irq(unsigned int virt_irq,
+                                     struct pci_dev *pdev)
 {
         struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
         const struct sparc64_msiq_ops *ops = pbm->msi_ops;
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index e2bb9790039c..a104c80d319d 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -531,7 +531,7 @@ static void dma_4v_sync_sg_for_cpu(struct device *dev,
         /* Nothing to do... */
 }
 
-const struct dma_ops sun4v_dma_ops = {
+static const struct dma_ops sun4v_dma_ops = {
         .alloc_coherent                 = dma_4v_alloc_coherent,
         .free_coherent                  = dma_4v_free_coherent,
         .map_single                     = dma_4v_map_single,
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 2084f81a76e1..8a9cd3e165b9 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -15,7 +15,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
@@ -97,7 +96,7 @@ void cpu_idle(void)
         set_thread_flag(TIF_POLLING_NRFLAG);
 
         while(1) {
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
 
                 while (!need_resched() && !cpu_is_offline(cpu))
                         sparc64_yield(cpu);
@@ -211,7 +210,7 @@ static void show_regwindow(struct pt_regs *regs)
         printk("i4: %016lx i5: %016lx i6: %016lx i7: %016lx\n",
                rwk->ins[4], rwk->ins[5], rwk->ins[6], rwk->ins[7]);
         if (regs->tstate & TSTATE_PRIV)
-                print_symbol("I7: <%s>\n", rwk->ins[7]);
+                printk("I7: <%pS>\n", (void *) rwk->ins[7]);
 }
 
 #ifdef CONFIG_SMP
@@ -232,7 +231,7 @@ void __show_regs(struct pt_regs * regs)
 #endif
         printk("TSTATE: %016lx TPC: %016lx TNPC: %016lx Y: %08x    %s\n", regs->tstate,
                regs->tpc, regs->tnpc, regs->y, print_tainted());
-        print_symbol("TPC: <%s>\n", regs->tpc);
+        printk("TPC: <%pS>\n", (void *) regs->tpc);
         printk("g0: %016lx g1: %016lx g2: %016lx g3: %016lx\n",
                regs->u_regs[0], regs->u_regs[1], regs->u_regs[2],
                regs->u_regs[3]);
@@ -245,7 +244,7 @@ void __show_regs(struct pt_regs * regs)
         printk("o4: %016lx o5: %016lx sp: %016lx ret_pc: %016lx\n",
                regs->u_regs[12], regs->u_regs[13], regs->u_regs[14],
                regs->u_regs[15]);
-        print_symbol("RPC: <%s>\n", regs->u_regs[15]);
+        printk("RPC: <%pS>\n", (void *) regs->u_regs[15]);
         show_regwindow(regs);
 #ifdef CONFIG_SMP
         spin_unlock(&regdump_lock);
@@ -346,9 +345,6 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 {
         struct thread_info *tp = current_thread_info();
         struct pt_regs *regs = get_irq_regs();
-#ifdef CONFIG_KALLSYMS
-        char buffer[KSYM_SYMBOL_LEN];
-#endif
         unsigned long flags;
         int this_cpu, cpu;
 
@@ -377,17 +373,13 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
                        gp->tstate, gp->tpc, gp->tnpc,
                        ((tp && tp->task) ? tp->task->comm : "NULL"),
                        ((tp && tp->task) ? tp->task->pid : -1));
-#ifdef CONFIG_KALLSYMS
+
                 if (gp->tstate & TSTATE_PRIV) {
-                        sprint_symbol(buffer, gp->tpc);
-                        printk("             TPC[%s] ", buffer);
-                        sprint_symbol(buffer, gp->o7);
-                        printk("O7[%s] ", buffer);
-                        sprint_symbol(buffer, gp->i7);
-                        printk("I7[%s]\n", buffer);
-                } else
-#endif
-                {
+                        printk("             TPC[%pS] O7[%pS] I7[%pS]\n",
+                               (void *) gp->tpc,
+                               (void *) gp->o7,
+                               (void *) gp->i7);
+                } else {
                         printk("             TPC[%lx] O7[%lx] I7[%lx]\n",
                                gp->tpc, gp->o7, gp->i7);
                 }
@@ -691,9 +683,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
                   ((unsigned long) child_sf) - STACK_BIAS;
 
                 /* Special case, if we are spawning a kernel thread from
-                 * a userspace task (via KMOD, NFS, or similar) we must
-                 * disable performance counters in the child because the
-                 * address space and protection realm are changing.
+                 * a userspace task (usermode helper, NFS or similar), we
+                 * must disable performance counters in the child because
+                 * the address space and protection realm are changing.
                  */
                 if (t->flags & _TIF_PERFCTR) {
                         t->user_cntd0 = t->user_cntd1 = NULL;
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index f6c9fc92921d..bd578cc4856d 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/audit.h>
 #include <linux/signal.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/compat.h>
 #include <linux/elf.h>
 
@@ -1049,8 +1050,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
         return ret;
 }
 
-asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
+        int ret = 0;
+
         /* do the secure computing check first */
         secure_computing(regs->u_regs[UREG_G1]);
 
@@ -1064,27 +1067,14 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
                 audit_syscall_exit(result, regs->u_regs[UREG_I0]);
         }
 
-        if (!(current->ptrace & PT_PTRACED))
-                goto out;
-
-        if (!test_thread_flag(TIF_SYSCALL_TRACE))
-                goto out;
-
-        ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-                                 ? 0x80 : 0));
-
-        /*
-         * this isn't the same as continuing with a signal, but it will do
-         * for normal use.  strace only continues with a signal if the
-         * stopping signal is not SIGTRAP.  -brl
-         */
-        if (current->exit_code) {
-                send_sig(current->exit_code, current, 1);
-                current->exit_code = 0;
+        if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+                if (syscall_exit_p)
+                        tracehook_report_syscall_exit(regs, 0);
+                else
+                        ret = tracehook_report_syscall_entry(regs);
         }
 
-out:
-        if (unlikely(current->audit_context) && !syscall_exit_p)
+        if (unlikely(current->audit_context) && !syscall_exit_p && !ret)
                 audit_syscall_entry((test_thread_flag(TIF_32BIT) ?
                                      AUDIT_ARCH_SPARC :
                                      AUDIT_ARCH_SPARC64),
@@ -1093,4 +1083,6 @@ out:
                                     regs->u_regs[UREG_I1],
                                     regs->u_regs[UREG_I2],
                                     regs->u_regs[UREG_I3]);
+
+        return ret;
 }
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index c6fc695fe1fe..97a993c1f7f3 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -46,7 +46,7 @@ __handle_user_windows:
                 wrpr                    %g0, RTRAP_PSTATE_IRQOFF, %pstate
                 ldx                     [%g6 + TI_FLAGS], %l0
 
-1:              andcc                   %l0, _TIF_SIGPENDING, %g0
+1:              andcc                   %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
                 be,pt                   %xcc, __handle_user_windows_continue
                  nop
                 mov                     %l5, %o1
@@ -86,7 +86,7 @@ __handle_perfctrs:
                  wrpr                   %g0, RTRAP_PSTATE, %pstate
                 wrpr                    %g0, RTRAP_PSTATE_IRQOFF, %pstate
                 ldx                     [%g6 + TI_FLAGS], %l0
-1:              andcc                   %l0, _TIF_SIGPENDING, %g0
+1:              andcc                   %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 
                 be,pt                   %xcc, __handle_perfctrs_continue
                  sethi                  %hi(TSTATE_PEF), %o0
@@ -195,7 +195,7 @@ __handle_preemption_continue:
                  andcc                  %l1, %o0, %g0
                 andcc                   %l0, _TIF_NEED_RESCHED, %g0
                 bne,pn                  %xcc, __handle_preemption
-                 andcc                  %l0, _TIF_SIGPENDING, %g0
+                 andcc                  %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
                 bne,pn                  %xcc, __handle_signal
 __handle_signal_continue:
                  ldub                   [%g6 + TI_WSAVED], %o2
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index 9667e96fd513..d1b84456a9ee 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -17,11 +17,13 @@
 #include <linux/errno.h>
 #include <linux/wait.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/unistd.h>
 #include <linux/mm.h>
 #include <linux/tty.h>
 #include <linux/binfmts.h>
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -574,6 +576,8 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
                  * clear the TS_RESTORE_SIGMASK flag.
                  */
                 current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+                tracehook_signal_handler(signr, &info, &ka, regs, 0);
                 return;
         }
         if (restart_syscall &&
@@ -605,4 +609,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long
 {
         if (thread_info_flags & _TIF_SIGPENDING)
                 do_signal(regs, orig_i0);
+        if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+                clear_thread_flag(TIF_NOTIFY_RESUME);
+                tracehook_notify_resume(regs);
+        }
 }
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 97cdd1bf4a10..ba5b09ad6666 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -19,6 +19,7 @@
 #include <linux/binfmts.h>
 #include <linux/compat.h>
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -794,6 +795,8 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
                  * clear the TS_RESTORE_SIGMASK flag.
                  */
                 current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+                tracehook_signal_handler(signr, &info, &ka, regs, 0);
                 return;
         }
         if (restart_syscall &&
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index c099d96f1239..7cf72b4bb108 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -788,89 +788,36 @@ static void smp_start_sync_tick_client(int cpu)
                               0, 0, 0, mask);
 }
 
-/* Send cross call to all processors except self. */
-#define smp_cross_call(func, ctx, data1, data2) \
-        smp_cross_call_masked(func, ctx, data1, data2, cpu_online_map)
-
-struct call_data_struct {
-        void (*func) (void *info);
-        void *info;
-        atomic_t finished;
-        int wait;
-};
-
-static struct call_data_struct *call_data;
-
 extern unsigned long xcall_call_function;
 
-/**
- * smp_call_function(): Run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-static int sparc64_smp_call_function_mask(void (*func)(void *info), void *info,
-                                          int wait, cpumask_t mask)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-        struct call_data_struct data;
-        int cpus;
-
-        /* Can deadlock when called with interrupts disabled */
-        WARN_ON(irqs_disabled());
-
-        data.func = func;
-        data.info = info;
-        atomic_set(&data.finished, 0);
-        data.wait = wait;
-
-        spin_lock(&call_lock);
-
-        cpu_clear(smp_processor_id(), mask);
-        cpus = cpus_weight(mask);
-        if (!cpus)
-                goto out_unlock;
-
-        call_data = &data;
-        mb();
-
         smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask);
+}
 
-        /* Wait for response */
-        while (atomic_read(&data.finished) != cpus)
-                cpu_relax();
+extern unsigned long xcall_call_function_single;
 
-out_unlock:
-        spin_unlock(&call_lock);
+void arch_send_call_function_single_ipi(int cpu)
+{
+        cpumask_t mask = cpumask_of_cpu(cpu);
 
-        return 0;
+        smp_cross_call_masked(&xcall_call_function_single, 0, 0, 0, mask);
 }
 
-int smp_call_function(void (*func)(void *info), void *info, int wait)
-{
-        return sparc64_smp_call_function_mask(func, info, wait, cpu_online_map);
-}
+/* Send cross call to all processors except self. */
+#define smp_cross_call(func, ctx, data1, data2) \
+        smp_cross_call_masked(func, ctx, data1, data2, cpu_online_map)
 
 void smp_call_function_client(int irq, struct pt_regs *regs)
 {
-        void (*func) (void *info) = call_data->func;
-        void *info = call_data->info;
+        clear_softint(1 << irq);
+        generic_smp_call_function_interrupt();
+}
 
+void smp_call_function_single_client(int irq, struct pt_regs *regs)
+{
         clear_softint(1 << irq);
-        if (call_data->wait) {
-                /* let initiator proceed only after completion */
-                func(info);
-                atomic_inc(&call_data->finished);
-        } else {
-                /* let initiator proceed after getting data */
-                atomic_inc(&call_data->finished);
-                func(info);
-        }
+        generic_smp_call_function_single_interrupt();
 }
 
 static void tsb_sync(void *info)
@@ -890,7 +837,7 @@ static void tsb_sync(void *info)
 
 void smp_tsb_sync(struct mm_struct *mm)
 {
-        sparc64_smp_call_function_mask(tsb_sync, mm, 1, mm->cpu_vm_mask);
+        smp_call_function_mask(mm->cpu_vm_mask, tsb_sync, mm, 1);
 }
 
 extern unsigned long xcall_flush_tlb_mm;
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 49d3ea50c247..504e678ee128 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -108,8 +108,6 @@ EXPORT_SYMBOL(__read_unlock);
 EXPORT_SYMBOL(__write_lock);
 EXPORT_SYMBOL(__write_unlock);
 EXPORT_SYMBOL(__write_trylock);
-
-EXPORT_SYMBOL(smp_call_function);
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_MCOUNT
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index ac1bff58c1ac..39749e32dc7e 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -418,7 +418,7 @@ asmlinkage long sparc_pipe(struct pt_regs *regs)
         int fd[2];
         int error;
 
-        error = do_pipe(fd);
+        error = do_pipe_flags(fd, 0);
         if (error)
                 goto out;
         regs->u_regs[UREG_I1] = fd[1];
@@ -542,7 +542,7 @@ asmlinkage long sparc64_personality(unsigned long personality)
         return ret;
 }
 
-int sparc64_mmap_check(unsigned long addr, unsigned long len)
+int sparc_mmap_check(unsigned long addr, unsigned long len)
 {
         if (test_thread_flag(TIF_32BIT)) {
                 if (len >= STACK_TOP32)
@@ -614,9 +614,9 @@ asmlinkage unsigned long sys64_mremap(unsigned long addr,
                 goto out;
         if (unlikely(new_len >= VA_EXCLUDE_START))
                 goto out;
-        if (unlikely(sparc64_mmap_check(addr, old_len)))
+        if (unlikely(sparc_mmap_check(addr, old_len)))
                 goto out;
-        if (unlikely(sparc64_mmap_check(new_addr, new_len)))
+        if (unlikely(sparc_mmap_check(new_addr, new_len)))
                 goto out;
 
         down_write(&current->mm->mmap_sem);
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index ba5bd626b39e..97b77fb5c50e 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -359,7 +359,8 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
         return err;
 }
 
-int cp_compat_stat64(struct kstat *stat, struct compat_stat64 __user *statbuf)
+static int cp_compat_stat64(struct kstat *stat,
+                            struct compat_stat64 __user *statbuf)
 {
         int err;
 
@@ -870,9 +871,9 @@ asmlinkage unsigned long sys32_mremap(unsigned long addr,
         unsigned long ret = -EINVAL;
         unsigned long new_addr = __new_addr;
 
-        if (unlikely(sparc64_mmap_check(addr, old_len)))
+        if (unlikely(sparc_mmap_check(addr, old_len)))
                 goto out;
-        if (unlikely(sparc64_mmap_check(new_addr, new_len)))
+        if (unlikely(sparc_mmap_check(new_addr, new_len)))
                 goto out;
         down_write(&current->mm->mmap_sem);
         ret = do_mremap(addr, old_len, new_len, flags, new_addr);
diff --git a/arch/sparc64/kernel/syscalls.S b/arch/sparc64/kernel/syscalls.S
index db19ed67acf6..a2f24270ed8a 100644
--- a/arch/sparc64/kernel/syscalls.S
+++ b/arch/sparc64/kernel/syscalls.S
@@ -162,6 +162,8 @@ linux_syscall_trace32:
         add     %sp, PTREGS_OFF, %o0
         call    syscall_trace
          clr    %o1
+        brnz,pn %o0, 3f
+         mov    -ENOSYS, %o0
         srl     %i0, 0, %o0
         srl     %i4, 0, %o4
         srl     %i1, 0, %o1
@@ -173,6 +175,8 @@ linux_syscall_trace:
         add     %sp, PTREGS_OFF, %o0
         call    syscall_trace
          clr    %o1
+        brnz,pn %o0, 3f
+         mov    -ENOSYS, %o0
         mov     %i0, %o0
         mov     %i1, %o1
         mov     %i2, %o2
diff --git a/arch/sparc64/kernel/sysfs.c b/arch/sparc64/kernel/sysfs.c
index e885034a6b73..84e5ce146713 100644
--- a/arch/sparc64/kernel/sysfs.c
+++ b/arch/sparc64/kernel/sysfs.c
@@ -14,7 +14,8 @@
 static DEFINE_PER_CPU(struct hv_mmu_statistics, mmu_stats) __attribute__((aligned(64)));
 
 #define SHOW_MMUSTAT_ULONG(NAME) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+                        struct sysdev_attribute *attr, char *buf) \
 { \
         struct hv_mmu_statistics *p = &per_cpu(mmu_stats, dev->id); \
         return sprintf(buf, "%lu\n", p->NAME); \
@@ -135,13 +136,16 @@ static unsigned long write_mmustat_enable(unsigned long val)
         return sun4v_mmustat_conf(ra, &orig_ra);
 }
 
-static ssize_t show_mmustat_enable(struct sys_device *s, char *buf)
+static ssize_t show_mmustat_enable(struct sys_device *s,
+                                struct sysdev_attribute *attr, char *buf)
 {
         unsigned long val = run_on_cpu(s->id, read_mmustat_enable, 0);
         return sprintf(buf, "%lx\n", val);
 }
 
-static ssize_t store_mmustat_enable(struct sys_device *s, const char *buf, size_t count)
+static ssize_t store_mmustat_enable(struct sys_device *s,
+                        struct sysdev_attribute *attr, const char *buf,
+                        size_t count)
 {
         unsigned long val, err;
         int ret = sscanf(buf, "%ld", &val);
@@ -179,14 +183,16 @@ static void unregister_mmu_stats(struct sys_device *s)
 #endif
 
 #define SHOW_CPUDATA_ULONG_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+                struct sysdev_attribute *attr, char *buf) \
 { \
         cpuinfo_sparc *c = &cpu_data(dev->id); \
         return sprintf(buf, "%lu\n", c->MEMBER); \
 }
 
 #define SHOW_CPUDATA_UINT_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+                struct sysdev_attribute *attr, char *buf) \
 { \
         cpuinfo_sparc *c = &cpu_data(dev->id); \
         return sprintf(buf, "%u\n", c->MEMBER); \
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 8b5282d433c4..1095bf4c5100 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -81,7 +81,8 @@ sys_call_table32:
 /*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages, compat_sys_mbind, compat_sys_get_mempolicy
         .word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
 /*310*/ .word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
-        .word compat_sys_timerfd_settime, compat_sys_timerfd_gettime
+        .word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1
 
 #endif /* CONFIG_COMPAT */
 
@@ -154,4 +155,5 @@ sys_call_table:
 /*300*/ .word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
         .word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-        .word sys_timerfd_settime, sys_timerfd_gettime
+        .word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index bedc4c159b1c..a0c6a97eec6e 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -884,6 +884,16 @@ static struct notifier_block sparc64_cpufreq_notifier_block = {
         .notifier_call  = sparc64_cpufreq_notifier
 };
 
+static int __init register_sparc64_cpufreq_notifier(void)
+{
+
+        cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
+                                  CPUFREQ_TRANSITION_NOTIFIER);
+        return 0;
+}
+
+core_initcall(register_sparc64_cpufreq_notifier);
+
 #endif /* CONFIG_CPU_FREQ */
 
 static int sparc64_next_event(unsigned long delta,
@@ -1050,11 +1060,6 @@ void __init time_init(void)
                sparc64_clockevent.mult, sparc64_clockevent.shift);
 
         setup_sparc64_timer();
-
-#ifdef CONFIG_CPU_FREQ
-        cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
-                                  CPUFREQ_TRANSITION_NOTIFIER);
-#endif
 }
 
 unsigned long long sched_clock(void)
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 369749262653..bd30ecba5630 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -1,6 +1,6 @@
 /* arch/sparc64/kernel/traps.c
  *
- * Copyright (C) 1995,1997 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1995,1997,2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
@@ -37,9 +36,6 @@
 #include <asm/processor.h>
 #include <asm/timer.h>
 #include <asm/head.h>
-#ifdef CONFIG_KMOD
-#include <linux/kmod.h>
-#endif
 #include <asm/prom.h>
 
 #include "entry.h"
@@ -74,7 +70,7 @@ static void dump_tl1_traplog(struct tl1_traplog *p)
                        i + 1,
                        p->trapstack[i].tstate, p->trapstack[i].tpc,
                        p->trapstack[i].tnpc, p->trapstack[i].tt);
-                print_symbol("TRAPLOG: TPC<%s>\n", p->trapstack[i].tpc);
+                printk("TRAPLOG: TPC<%pS>\n", (void *) p->trapstack[i].tpc);
         }
 }
 
@@ -1081,7 +1077,7 @@ static void cheetah_log_errors(struct pt_regs *regs, struct cheetah_err_info *in
                regs->tpc, regs->tnpc, regs->u_regs[UREG_I7], regs->tstate);
         printk("%s" "ERROR(%d): ",
                (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id());
-        print_symbol("TPC<%s>\n", regs->tpc);
+        printk("TPC<%pS>\n", (void *) regs->tpc);
         printk("%s" "ERROR(%d): M_SYND(%lx),  E_SYND(%lx)%s%s\n",
                (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id(),
                (afsr & CHAFSR_M_SYNDROME) >> CHAFSR_M_SYNDROME_SHIFT,
@@ -1689,7 +1685,7 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs)
                        smp_processor_id(),
                        (type & 0x1) ? 'I' : 'D',
                        regs->tpc);
-                print_symbol(KERN_EMERG "TPC<%s>\n", regs->tpc);
+                printk(KERN_EMERG "TPC<%pS>\n", (void *) regs->tpc);
                 panic("Irrecoverable Cheetah+ parity error.");
         }
 
@@ -1697,7 +1693,7 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs)
                smp_processor_id(),
                (type & 0x1) ? 'I' : 'D',
                regs->tpc);
-        print_symbol(KERN_WARNING "TPC<%s>\n", regs->tpc);
+        printk(KERN_WARNING "TPC<%pS>\n", (void *) regs->tpc);
 }
 
 struct sun4v_error_entry {
@@ -1904,9 +1900,10 @@ void sun4v_itlb_error_report(struct pt_regs *regs, int tl)
 
         printk(KERN_EMERG "SUN4V-ITLB: Error at TPC[%lx], tl %d\n",
                regs->tpc, tl);
-        print_symbol(KERN_EMERG "SUN4V-ITLB: TPC<%s>\n", regs->tpc);
+        printk(KERN_EMERG "SUN4V-ITLB: TPC<%pS>\n", (void *) regs->tpc);
         printk(KERN_EMERG "SUN4V-ITLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
-        print_symbol(KERN_EMERG "SUN4V-ITLB: O7<%s>\n", regs->u_regs[UREG_I7]);
+        printk(KERN_EMERG "SUN4V-ITLB: O7<%pS>\n",
+               (void *) regs->u_regs[UREG_I7]);
         printk(KERN_EMERG "SUN4V-ITLB: vaddr[%lx] ctx[%lx] "
                "pte[%lx] error[%lx]\n",
                sun4v_err_itlb_vaddr, sun4v_err_itlb_ctx,
@@ -1927,9 +1924,10 @@ void sun4v_dtlb_error_report(struct pt_regs *regs, int tl)
 
         printk(KERN_EMERG "SUN4V-DTLB: Error at TPC[%lx], tl %d\n",
                regs->tpc, tl);
-        print_symbol(KERN_EMERG "SUN4V-DTLB: TPC<%s>\n", regs->tpc);
+        printk(KERN_EMERG "SUN4V-DTLB: TPC<%pS>\n", (void *) regs->tpc);
         printk(KERN_EMERG "SUN4V-DTLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
-        print_symbol(KERN_EMERG "SUN4V-DTLB: O7<%s>\n", regs->u_regs[UREG_I7]);
+        printk(KERN_EMERG "SUN4V-DTLB: O7<%pS>\n",
+               (void *) regs->u_regs[UREG_I7]);
         printk(KERN_EMERG "SUN4V-DTLB: vaddr[%lx] ctx[%lx] "
                "pte[%lx] error[%lx]\n",
                sun4v_err_dtlb_vaddr, sun4v_err_dtlb_ctx,
@@ -2111,10 +2109,7 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
         fp = ksp + STACK_BIAS;
         thread_base = (unsigned long) tp;
 
-        printk("Call Trace:");
-#ifdef CONFIG_KALLSYMS
-        printk("\n");
-#endif
+        printk("Call Trace:\n");
         do {
                 struct sparc_stackf *sf;
                 struct pt_regs *regs;
@@ -2137,12 +2132,8 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
                         fp = (unsigned long)sf->fp + STACK_BIAS;
                 }
 
-                printk(" [%016lx] ", pc);
-                print_symbol("%s\n", pc);
+                printk(" [%016lx] %pS\n", pc, (void *) pc);
         } while (++count < 16);
-#ifndef CONFIG_KALLSYMS
-        printk("\n");
-#endif
 }
 
 void dump_stack(void)
@@ -2211,9 +2202,8 @@ void die_if_kernel(char *str, struct pt_regs *regs)
                 while (rw &&
                        count++ < 30&&
                        is_kernel_stack(current, rw)) {
-                        printk("Caller[%016lx]", rw->ins[7]);
-                        print_symbol(": %s", rw->ins[7]);
-                        printk("\n");
+                        printk("Caller[%016lx]: %pS\n", rw->ins[7],
+                               (void *) rw->ins[7]);
 
                         rw = kernel_stack_up(rw);
                 }
diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S
index 450053af039e..1ade3d6fb7fc 100644
--- a/arch/sparc64/kernel/ttable.S
+++ b/arch/sparc64/kernel/ttable.S
@@ -58,7 +58,12 @@ tl0_irq3:	BTRAP(0x43)
 tl0_irq4:       BTRAP(0x44)
 #endif
 tl0_irq5:       TRAP_IRQ(handler_irq, 5)
-tl0_irq6:       BTRAP(0x46) BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
+#ifdef CONFIG_SMP
+tl0_irq6:       TRAP_IRQ(smp_call_function_single_client, 6)
+#else
+tl0_irq6:       BTRAP(0x46)
+#endif
+tl0_irq7:       BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
 tl0_irq10:      BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
 tl0_irq14:      TRAP_IRQ(timer_interrupt, 14)
 tl0_irq15:      TRAP_IRQ(handler_irq, 15)
diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c
index afa7fc4f5193..203ddfad9f27 100644
--- a/arch/sparc64/kernel/unaligned.c
+++ b/arch/sparc64/kernel/unaligned.c
@@ -2,7 +2,7 @@
  * unaligned.c: Unaligned load/store trap handling with special
  *              cases for the kernel to do them more quickly.
  *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
  */
 
@@ -20,7 +20,6 @@
 #include <asm/uaccess.h>
 #include <linux/smp.h>
 #include <linux/bitops.h>
-#include <linux/kallsyms.h>
 #include <asm/fpumacro.h>
 
 /* #define DEBUG_MNA */
@@ -289,8 +288,8 @@ static void log_unaligned(struct pt_regs *regs)
         if (count < 5) {
                 last_time = jiffies;
                 count++;
-                printk("Kernel unaligned access at TPC[%lx] ", regs->tpc);
-                print_symbol("%s\n", regs->tpc);
+                printk("Kernel unaligned access at TPC[%lx] %pS\n",
+                       regs->tpc, (void *) regs->tpc);
         }
 }
 
diff --git a/arch/sparc64/kernel/vio.c b/arch/sparc64/kernel/vio.c
index e78b3517940b..a490077891a4 100644
--- a/arch/sparc64/kernel/vio.c
+++ b/arch/sparc64/kernel/vio.c
@@ -224,7 +224,7 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
         if (!strcmp(type, "domain-services-port"))
                 bus_id_name = "ds";
 
-        if (strlen(bus_id_name) >= KOBJ_NAME_LEN - 4) {
+        if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) {
                 printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n",
                        bus_id_name);
                 return NULL;
@@ -260,16 +260,14 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
         vio_fill_channel_info(hp, mp, vdev);
 
         if (!id) {
-                snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s",
-                         bus_id_name);
+                dev_set_name(&vdev->dev, "%s", bus_id_name);
                 vdev->dev_no = ~(u64)0;
         } else if (!cfg_handle) {
-                snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s-%lu",
-                         bus_id_name, *id);
+                dev_set_name(&vdev->dev, "%s-%lu", bus_id_name, *id);
                 vdev->dev_no = *id;
         } else {
-                snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s-%lu-%lu",
-                         bus_id_name, *cfg_handle, *id);
+                dev_set_name(&vdev->dev, "%s-%lu-%lu", bus_id_name,
+                             *cfg_handle, *id);
                 vdev->dev_no = *cfg_handle;
         }
 
@@ -292,12 +290,12 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
         }
         vdev->dp = dp;
 
-        printk(KERN_INFO "VIO: Adding device %s\n", vdev->dev.bus_id);
+        printk(KERN_INFO "VIO: Adding device %s\n", dev_name(&vdev->dev));
 
         err = device_register(&vdev->dev);
         if (err) {
                 printk(KERN_ERR "VIO: Could not register device %s, err=%d\n",
-                       vdev->dev.bus_id, err);
+                       dev_name(&vdev->dev), err);
                 kfree(vdev);
                 return NULL;
         }
@@ -330,7 +328,7 @@ static void vio_remove(struct mdesc_handle *hp, u64 node)
         dev = device_find_child(&root_vdev->dev, (void *) node,
                                 vio_md_node_match);
         if (dev) {
-                printk(KERN_INFO "VIO: Removing device %s\n", dev->bus_id);
+                printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev));
 
                 device_unregister(dev);
         }
diff --git a/arch/sparc64/lib/copy_page.S b/arch/sparc64/lib/copy_page.S
index 37460666a5c3..b243d3b606ba 100644
--- a/arch/sparc64/lib/copy_page.S
+++ b/arch/sparc64/lib/copy_page.S
@@ -25,9 +25,9 @@
 
 #define DCACHE_SIZE     (PAGE_SIZE * 2)
 
-#if (PAGE_SHIFT == 13) || (PAGE_SHIFT == 19)
+#if (PAGE_SHIFT == 13)
 #define PAGE_SIZE_REM   0x80
-#elif (PAGE_SHIFT == 16) || (PAGE_SHIFT == 22)
+#elif (PAGE_SHIFT == 16)
 #define PAGE_SIZE_REM   0x100
 #else
 #error Wrong PAGE_SHIFT specified
@@ -198,7 +198,7 @@ cheetah_copy_page_insn:
         cmp             %o2, PAGE_SIZE_REM
         bne,pt          %xcc, 1b
          add            %o0, 0x40, %o0
-#if (PAGE_SHIFT == 16) || (PAGE_SHIFT == 22)
+#if (PAGE_SHIFT == 16)
         TOUCH(f0, f2, f4, f6, f8, f10, f12, f14)
         ldda            [%o1] ASI_BLK_P, %f32
         stda            %f48, [%o0] %asi
diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c
index 236f4d228d2b..ea7d7ae76bc2 100644
--- a/arch/sparc64/mm/fault.c
+++ b/arch/sparc64/mm/fault.c
@@ -1,7 +1,7 @@
 /*
  * arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc.
  *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
  */
 
@@ -18,7 +18,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kprobes.h>
-#include <linux/kallsyms.h>
 #include <linux/kdebug.h>
 
 #include <asm/page.h>
@@ -115,7 +114,7 @@ static void bad_kernel_pc(struct pt_regs *regs, unsigned long vaddr)
         printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n",
                regs->tpc);
         printk(KERN_CRIT "OOPS: RPC [%016lx]\n", regs->u_regs[15]);
-        print_symbol("RPC: <%s>\n", regs->u_regs[15]);
+        printk("OOPS: RPC <%pS>\n", (void *) regs->u_regs[15]);
         printk(KERN_CRIT "OOPS: Fault was to vaddr[%lx]\n", vaddr);
         dump_stack();
         unhandled_fault(regs->tpc, current, regs);
diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c
index ebefd2a14375..f27d10369e0c 100644
--- a/arch/sparc64/mm/hugetlbpage.c
+++ b/arch/sparc64/mm/hugetlbpage.c
@@ -175,7 +175,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
                 return -ENOMEM;
 
         if (flags & MAP_FIXED) {
-                if (prepare_hugepage_range(addr, len))
+                if (prepare_hugepage_range(file, addr, len))
                         return -EINVAL;
                 return addr;
         }
@@ -195,7 +195,8 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
                                 pgoff, flags);
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+                        unsigned long addr, unsigned long sz)
 {
         pgd_t *pgd;
         pud_t *pud;
@@ -294,6 +295,11 @@ int pmd_huge(pmd_t pmd)
         return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+        return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
                              pmd_t *pmd, int write)
 {
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 84898c44dd4d..4e821b3ecb03 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -392,51 +392,6 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end)
         }
 }
 
-void show_mem(void)
-{
-        unsigned long total = 0, reserved = 0;
-        unsigned long shared = 0, cached = 0;
-        pg_data_t *pgdat;
-
-        printk(KERN_INFO "Mem-info:\n");
-        show_free_areas();
-        printk(KERN_INFO "Free swap:       %6ldkB\n",
-               nr_swap_pages << (PAGE_SHIFT-10));
-        for_each_online_pgdat(pgdat) {
-                unsigned long i, flags;
-
-                pgdat_resize_lock(pgdat, &flags);
-                for (i = 0; i < pgdat->node_spanned_pages; i++) {
-                        struct page *page = pgdat_page_nr(pgdat, i);
-                        total++;
-                        if (PageReserved(page))
-                                reserved++;
-                        else if (PageSwapCache(page))
-                                cached++;
-                        else if (page_count(page))
-                                shared += page_count(page) - 1;
-                }
-                pgdat_resize_unlock(pgdat, &flags);
-        }
-
-        printk(KERN_INFO "%lu pages of RAM\n", total);
-        printk(KERN_INFO "%lu reserved pages\n", reserved);
-        printk(KERN_INFO "%lu pages shared\n", shared);
-        printk(KERN_INFO "%lu pages swap cached\n", cached);
-
-        printk(KERN_INFO "%lu pages dirty\n",
-               global_page_state(NR_FILE_DIRTY));
-        printk(KERN_INFO "%lu pages writeback\n",
-               global_page_state(NR_WRITEBACK));
-        printk(KERN_INFO "%lu pages mapped\n",
-               global_page_state(NR_FILE_MAPPED));
-        printk(KERN_INFO "%lu pages slab\n",
-                global_page_state(NR_SLAB_RECLAIMABLE) +
-                global_page_state(NR_SLAB_UNRECLAIMABLE));
-        printk(KERN_INFO "%lu pages pagetables\n",
-               global_page_state(NR_PAGETABLE));
-}
-
 void mmu_info(struct seq_file *m)
 {
         if (tlb_type == cheetah)
@@ -788,7 +743,6 @@ int numa_cpu_lookup_table[NR_CPUS];
 cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES];
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 
 struct mdesc_mblock {
         u64     base;
@@ -871,7 +825,7 @@ static void __init allocate_node_data(int nid)
         NODE_DATA(nid) = __va(paddr);
         memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-        NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+        NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 #endif
 
         p = NODE_DATA(nid);
diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c
index fe70c8a557b5..3547937b17a2 100644
--- a/arch/sparc64/mm/tsb.c
+++ b/arch/sparc64/mm/tsb.c
@@ -96,12 +96,6 @@ void flush_tsb_user(struct mmu_gather *mp)
 #elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
 #define HV_PGSZ_IDX_BASE        HV_PGSZ_IDX_64K
 #define HV_PGSZ_MASK_BASE       HV_PGSZ_MASK_64K
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB)
-#define HV_PGSZ_IDX_BASE        HV_PGSZ_IDX_512K
-#define HV_PGSZ_MASK_BASE       HV_PGSZ_MASK_512K
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB)
-#define HV_PGSZ_IDX_BASE        HV_PGSZ_IDX_4MB
-#define HV_PGSZ_MASK_BASE       HV_PGSZ_MASK_4MB
 #else
 #error Broken base page size setting...
 #endif
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 9bb2d90a9df6..4c8ca131ffaf 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -688,6 +688,11 @@ xcall_call_function:
         wr              %g0, (1 << PIL_SMP_CALL_FUNC), %set_softint
         retry
 
+        .globl          xcall_call_function_single
+xcall_call_function_single:
+        wr              %g0, (1 << PIL_SMP_CALL_FUNC_SNGL), %set_softint
+        retry
+
         .globl          xcall_receive_signal
 xcall_receive_signal:
         wr              %g0, (1 << PIL_SMP_RECEIVE_SIGNAL), %set_softint
diff --git a/arch/um/include/init.h b/arch/um/include/init.h
index b00a95741d41..37dd097c16c0 100644
--- a/arch/um/include/init.h
+++ b/arch/um/include/init.h
@@ -45,6 +45,8 @@ typedef void (*exitcall_t)(void);
 # define __section(S) __attribute__ ((__section__(#S)))
 #endif
 
+#if __GNUC__ == 3
+
 #if __GNUC_MINOR__ >= 3
 # define __used                 __attribute__((__used__))
 #else
@@ -52,6 +54,12 @@ typedef void (*exitcall_t)(void);
 #endif
 
 #else
+#if __GNUC__ == 4
+# define __used                 __attribute__((__used__))
+#endif
+#endif
+
+#else
 #include <linux/compiler.h>
 #endif
 /* These are for everybody (although not all archs will actually
diff --git a/arch/um/include/irq_kern.h b/arch/um/include/irq_kern.h
index 4f775597fd5f..fba3895274f9 100644
--- a/arch/um/include/irq_kern.h
+++ b/arch/um/include/irq_kern.h
@@ -13,8 +13,6 @@ extern int um_request_irq(unsigned int irq, int fd, int type,
                           irq_handler_t handler,
                           unsigned long irqflags,  const char * devname,
                           void *dev_id);
-extern int init_aio_irq(int irq, char *name,
-                        irq_handler_t handler);
 
 #endif
 
diff --git a/arch/um/include/irq_user.h b/arch/um/include/irq_user.h
index e60b31873de1..c6c784df2673 100644
--- a/arch/um/include/irq_user.h
+++ b/arch/um/include/irq_user.h
@@ -21,8 +21,6 @@ struct irq_fd {
 enum { IRQ_READ, IRQ_WRITE };
 
 extern void sigio_handler(int sig, struct uml_pt_regs *regs);
-extern int activate_fd(int irq, int fd, int type, void *dev_id);
-extern void free_irq_by_irq_and_dev(unsigned int irq, void *dev_id);
 extern void free_irq_by_fd(int fd);
 extern void reactivate_fd(int fd, int irqnum);
 extern void deactivate_fd(int fd, int irqnum);
diff --git a/arch/um/include/skas/skas.h b/arch/um/include/skas/skas.h
index b073f8a86bd3..64d2c7443306 100644
--- a/arch/um/include/skas/skas.h
+++ b/arch/um/include/skas/skas.h
@@ -16,7 +16,6 @@ extern int user_thread(unsigned long stack, int flags);
 extern void new_thread_handler(void);
 extern void handle_syscall(struct uml_pt_regs *regs);
 extern int new_mm(unsigned long stack);
-extern void get_skas_faultinfo(int pid, struct faultinfo * fi);
 extern long execute_syscall_skas(void *r);
 extern unsigned long current_stub_stack(void);
 
diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h
index 2b6fc8e0f071..45c04999d670 100644
--- a/arch/um/include/um_uaccess.h
+++ b/arch/um/include/um_uaccess.h
@@ -34,7 +34,6 @@ extern int copy_to_user(void __user *to, const void *from, int n);
 
 extern int __do_copy_to_user(void *to, const void *from, int n,
                              void **fault_addr, jmp_buf **fault_catcher);
-extern void __do_copy(void *to, const void *from, int n);
 
 /*
  * strncpy_from_user: - Copy a NUL terminated string from userspace.
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 91587f8db340..3d7aad09b171 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -102,7 +102,7 @@ void sigio_handler(int sig, struct uml_pt_regs *regs)
 
 static DEFINE_SPINLOCK(irq_lock);
 
-int activate_fd(int irq, int fd, int type, void *dev_id)
+static int activate_fd(int irq, int fd, int type, void *dev_id)
 {
         struct pollfd *tmp_pfd;
         struct irq_fd *new_fd, *irq_fd;
@@ -216,7 +216,7 @@ static int same_irq_and_dev(struct irq_fd *irq, void *d)
         return ((irq->irq == data->irq) && (irq->id == data->dev));
 }
 
-void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
+static void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
 {
         struct irq_and_dev data = ((struct irq_and_dev) { .irq  = irq,
                                                           .dev  = dev });
@@ -403,37 +403,6 @@ void __init init_IRQ(void)
         }
 }
 
-int init_aio_irq(int irq, char *name, irq_handler_t handler)
-{
-        int fds[2], err;
-
-        err = os_pipe(fds, 1, 1);
-        if (err) {
-                printk(KERN_ERR "init_aio_irq - os_pipe failed, err = %d\n",
-                       -err);
-                goto out;
-        }
-
-        err = um_request_irq(irq, fds[0], IRQ_READ, handler,
-                             IRQF_DISABLED | IRQF_SAMPLE_RANDOM, name,
-                             (void *) (long) fds[0]);
-        if (err) {
-                printk(KERN_ERR "init_aio_irq - : um_request_irq failed, "
-                       "err = %d\n",
-                       err);
-                goto out_close;
-        }
-
-        err = fds[1];
-        goto out;
-
- out_close:
-        os_close_file(fds[0]);
-        os_close_file(fds[1]);
- out:
-        return err;
-}
-
 /*
  * IRQ stack entry and exit:
  *
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index ccc02a616c22..836fc9b94707 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -18,7 +18,6 @@ EXPORT_SYMBOL(get_signals);
 EXPORT_SYMBOL(kernel_thread);
 EXPORT_SYMBOL(sys_waitpid);
 EXPORT_SYMBOL(flush_tlb_range);
-EXPORT_SYMBOL(arch_validate);
 
 EXPORT_SYMBOL(high_physmem);
 EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index b0ee64622ff7..61d7e6138ff5 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -21,7 +21,7 @@
 /* allocated in paging_init, zeroed in mem_init, and unchanged thereafter */
 unsigned long *empty_zero_page = NULL;
 /* allocated in paging_init and unchanged thereafter */
-unsigned long *empty_bad_page = NULL;
+static unsigned long *empty_bad_page = NULL;
 
 /*
  * Initialized during boot, and readonly for initializing page tables
@@ -240,37 +240,6 @@ void __init paging_init(void)
 #endif
 }
 
-struct page *arch_validate(struct page *page, gfp_t mask, int order)
-{
-        unsigned long addr, zero = 0;
-        int i;
-
- again:
-        if (page == NULL)
-                return page;
-        if (PageHighMem(page))
-                return page;
-
-        addr = (unsigned long) page_address(page);
-        for (i = 0; i < (1 << order); i++) {
-                current->thread.fault_addr = (void *) addr;
-                if (__do_copy_to_user((void __user *) addr, &zero,
-                                     sizeof(zero),
-                                     &current->thread.fault_addr,
-                                     &current->thread.fault_catcher)) {
-                        if (!(mask & __GFP_WAIT))
-                                return NULL;
-                        else break;
-                }
-                addr += PAGE_SIZE;
-        }
-
-        if (i == (1 << order))
-                return page;
-        page = alloc_pages(mask, order);
-        goto again;
-}
-
 /*
  * This can't do anything because nothing in the kernel image can be freed
  * since it's not in kernel physical memory.
@@ -295,37 +264,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-void show_mem(void)
-{
-        int pfn, total = 0, reserved = 0;
-        int shared = 0, cached = 0;
-        int high_mem = 0;
-        struct page *page;
-
-        printk(KERN_INFO "Mem-info:\n");
-        show_free_areas();
-        printk(KERN_INFO "Free swap:       %6ldkB\n",
-               nr_swap_pages<<(PAGE_SHIFT-10));
-        pfn = max_mapnr;
-        while (pfn-- > 0) {
-                page = pfn_to_page(pfn);
-                total++;
-                if (PageHighMem(page))
-                        high_mem++;
-                if (PageReserved(page))
-                        reserved++;
-                else if (PageSwapCache(page))
-                        cached++;
-                else if (page_count(page))
-                        shared += page_count(page) - 1;
-        }
-        printk(KERN_INFO "%d pages of RAM\n", total);
-        printk(KERN_INFO "%d pages of HIGHMEM\n", high_mem);
-        printk(KERN_INFO "%d reserved pages\n", reserved);
-        printk(KERN_INFO "%d pages shared\n", shared);
-        printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /* Allocate and free page tables. */
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index 9757085a0220..a1a9090254c2 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -185,7 +185,7 @@ unsigned long find_iomem(char *driver, unsigned long *len_out)
         return 0;
 }
 
-int setup_iomem(void)
+static int setup_iomem(void)
 {
         struct iomem_region *region = iomem_regions;
         unsigned long iomem_start = high_physmem + PAGE_SIZE;
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 83603cfbde81..a1c6d07cac3e 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -243,7 +243,7 @@ void default_idle(void)
                 if (need_resched())
                         schedule();
 
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 nsecs = disable_timer();
                 idle_sleep(nsecs);
                 tick_nohz_restart_sched_tick();
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 47b57b497d55..15e8b7c4de13 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -225,7 +225,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
         return ret;
 }
 
-void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
+static void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
                   int error_code)
 {
         struct siginfo info;
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index c3e2f369c33c..47f04f4a3464 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -13,14 +13,6 @@
 #include "kern_util.h"
 #include "os.h"
 
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
-        return (unsigned long long)jiffies_64 * (NSEC_PER_SEC / HZ);
-}
-
 void timer_handler(int sig, struct uml_pt_regs *regs)
 {
         unsigned long flags;
diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c
index f0f4b040d7c5..dd33f040c526 100644
--- a/arch/um/kernel/uaccess.c
+++ b/arch/um/kernel/uaccess.c
@@ -12,7 +12,7 @@
 #include <linux/string.h>
 #include "os.h"
 
-void __do_copy(void *to, const void *from, int n)
+static void __do_copy(void *to, const void *from, int n)
 {
         memcpy(to, from, n);
 }
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index eb8f2e4be192..63d299df152b 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -530,7 +530,7 @@ static void tty_close(int master, int slave)
                 printk(UM_KERN_CONT "No, enabling workaround\n");
 }
 
-void __init check_sigio(void)
+static void __init check_sigio(void)
 {
         if ((access("/dev/ptmx", R_OK) < 0) &&
             (access("/dev/ptyp0", R_OK) < 0)) {
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 5aade6027e40..6ae180703a63 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -126,7 +126,7 @@ void set_sigstack(void *sig_stack, int size)
                 panic("enabling signal stack failed, errno = %d\n", errno);
 }
 
-void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
+static void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
 
 void handle_signal(int sig, struct sigcontext *sc)
 {
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 172ad8f72e12..d6e0a2234b86 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -96,7 +96,7 @@ bad_wait:
 
 extern unsigned long current_stub_stack(void);
 
-void get_skas_faultinfo(int pid, struct faultinfo * fi)
+static void get_skas_faultinfo(int pid, struct faultinfo *fi)
 {
         int err;
 
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index 106fa8641553..a27defb81884 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -245,7 +245,7 @@ int __init set_umid(char *name)
 /* Changed in make_umid, which is called during early boot */
 static int umid_setup = 0;
 
-int __init make_umid(void)
+static int __init make_umid(void)
 {
         int fd, err;
         char tmp[256];
diff --git a/arch/um/sys-i386/bugs.c b/arch/um/sys-i386/bugs.c
index a74442d13762..2c6d0d731c12 100644
--- a/arch/um/sys-i386/bugs.c
+++ b/arch/um/sys-i386/bugs.c
@@ -12,7 +12,7 @@
 #include "sysdep/ptrace.h"
 
 /* Set during early boot */
-int host_has_cmov = 1;
+static int host_has_cmov = 1;
 static jmp_buf cmov_test_return;
 
 static void cmov_sigill_test_handler(int sig)
diff --git a/arch/um/sys-i386/checksum.S b/arch/um/sys-i386/checksum.S
index 62c7e564f22e..f058d2f82e18 100644
--- a/arch/um/sys-i386/checksum.S
+++ b/arch/um/sys-i386/checksum.S
@@ -243,13 +243,12 @@ unsigned int csum_partial_copy_generic (const char *src, char *dst,
         .previous
 
 .align 4
-.globl csum_partial_copy_generic_i386
-                                
+
 #ifndef CONFIG_X86_USE_PPRO_CHECKSUM
 
 #define ARGBASE 16              
 #define FP              12
-                
+
 csum_partial_copy_generic_i386:
         subl  $4,%esp   
         pushl %edi
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index a34263e6b08d..a4846a84a7be 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -14,8 +14,8 @@
 
 extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
 
-long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
-                     void **addr, int done)
+static long write_ldt_entry(struct mm_id *mm_idp, int func,
+                     struct user_desc *desc, void **addr, int done)
 {
         long res;
 
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
deleted file mode 100644
index 4379f43505ef..000000000000
--- a/arch/v850/Kconfig
+++ /dev/null
@@ -1,353 +0,0 @@
-#############################################################################
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-#############################################################################
-
-mainmenu "uClinux/v850 (w/o MMU) Kernel Configuration"
-
-config MMU
-        bool
-        default n
-config ZONE_DMA
-        bool
-        default y
-config RWSEM_GENERIC_SPINLOCK
-        bool
-        default y
-config RWSEM_XCHGADD_ALGORITHM
-        bool
-        default n
-config GENERIC_FIND_NEXT_BIT
-        bool
-        default y
-config GENERIC_HWEIGHT
-        bool
-        default y
-config GENERIC_CALIBRATE_DELAY
-        bool
-        default y
-
-config GENERIC_HARDIRQS
-        bool
-        default y
-
-config GENERIC_IRQ_PROBE
-        bool
-        default y
-
-config GENERIC_TIME
-        bool
-        default y
-
-config TIME_LOW_RES
-        bool
-        default y
-
-config ARCH_HAS_ILOG2_U32
-        bool
-        default n
-
-config ARCH_HAS_ILOG2_U64
-        bool
-        default n
-
-config ARCH_SUPPORTS_AOUT
-        def_bool y
-
-# Turn off some random 386 crap that can affect device config
-config ISA
-        bool
-        default n
-config ISAPNP
-        bool
-        default n
-config EISA
-        bool
-        default n
-config MCA
-        bool
-        default n
-
-
-#############################################################################
-#### v850-specific config
-
-# Define the architecture
-config V850
-        bool
-        default y
-        select HAVE_IDE
-
-menu "Processor type and features"
-
-   choice
-          prompt "Platform"
-          default GDB
-      config V850E_SIM
-             bool "GDB"
-      config RTE_CB_MA1
-             bool "RTE-V850E/MA1-CB"
-      config RTE_CB_NB85E
-             bool "RTE-V850E/NB85E-CB"
-      config RTE_CB_ME2
-             bool "RTE-V850E/ME2-CB"
-      config V850E_AS85EP1
-             bool "AS85EP1"
-      config V850E2_SIM85E2C
-             bool "sim85e2c"
-      config V850E2_SIM85E2S
-             bool "sim85e2s"
-      config V850E2_FPGA85E2C
-             bool "NA85E2C-FPGA"
-      config V850E2_ANNA
-             bool "Anna"
-   endchoice
-
-   #### V850E processor-specific config
-
-   # All CPUs currently supported use the v850e architecture
-   config V850E
-          bool
-          default y
-
-   # The RTE-V850E/MA1-CB is the only type of V850E/MA1 platform we
-   # currently support
-   config V850E_MA1
-          bool
-          depends on RTE_CB_MA1
-          default y
-   # Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
-   config V850E_TEG
-          bool
-          depends on RTE_CB_NB85E
-          default y
-   # ... and the RTE-V850E/ME2-CB - V850E/ME2
-   config V850E_ME2
-          bool
-          depends on RTE_CB_ME2
-          default y
-
-
-   #### sim85e2-specific config
-
-   config V850E2_SIM85E2
-          bool
-          depends on V850E2_SIM85E2C || V850E2_SIM85E2S
-          default y
-
-
-   #### V850E2 processor-specific config
-
-   # V850E2 processors
-   config V850E2
-          bool
-          depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
-          default y
-
-
-   #### RTE-CB platform-specific config
-
-   # Boards in the RTE-x-CB series
-   config RTE_CB
-          bool
-          depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
-          default y
-
-   config RTE_CB_MULTI
-          bool
-          # RTE_CB_NB85E can either have multi ROM support or not, but
-          # other platforms (currently only RTE_CB_MA1) require it.
-          prompt "Multi monitor ROM support" if RTE_CB_NB85E
-          depends on RTE_CB_MA1 || RTE_CB_NB85E
-          default y
-
-   config RTE_CB_MULTI_DBTRAP
-          bool "Pass illegal insn trap / dbtrap to kernel"
-          depends on RTE_CB_MULTI
-          default n
-
-   config RTE_CB_MA1_KSRAM
-          bool "Kernel in SRAM (limits size of kernel)"
-          depends on RTE_CB_MA1 && RTE_CB_MULTI
-          default n
-
-   config RTE_MB_A_PCI
-          bool "Mother-A PCI support"
-          depends on RTE_CB
-          default y
-
-   # The GBUS is used to talk to the RTE-MOTHER-A board
-   config RTE_GBUS_INT
-          bool
-          depends on RTE_MB_A_PCI
-          default y
-
-   # The only PCI bus we support is on the RTE-MOTHER-A board
-   config PCI
-          bool
-          default RTE_MB_A_PCI
-
-   #### Some feature-specific configs
-
-   # Everything except for the GDB simulator uses the same interrupt controller
-   config V850E_INTC
-          bool
-          default !V850E_SIM
-
-   # Everything except for the various simulators uses the "Timer D" unit
-   config V850E_TIMER_D
-          bool
-          default !V850E_SIM && !V850E2_SIM85E2
-
-   # Cache control used on some v850e1 processors
-   config V850E_CACHE
-          bool
-          default V850E_TEG || V850E_ME2
-
-   # Cache control used on v850e2 processors; I think this should
-   # actually apply to more, but currently only the SIM85E2S uses it
-   config V850E2_CACHE
-          bool
-          default V850E2_SIM85E2S
-
-   config NO_CACHE
-          bool
-          default !V850E_CACHE && !V850E2_CACHE
-
-   # HZ depends on the platform
-   config HZ
-          int
-          default 24  if V850E_SIM || V850E2_SIM85E2
-          default 122 if V850E2_FPGA85E2C
-          default 100
-
-   #### Misc config
-
-   config ROM_KERNEL
-          bool "Kernel in ROM"
-          depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
-
-   # Some platforms pre-zero memory, in which case the kernel doesn't need to
-   config ZERO_BSS
-          bool
-          depends on !V850E2_SIM85E2C
-          default y
-
-   # The crappy-ass zone allocator requires that the start of allocatable
-   # memory be aligned to the largest possible allocation.
-   config FORCE_MAX_ZONEORDER
-          int
-          default 8 if V850E2_SIM85E2C || V850E2_FPGA85E2C
-
-   config V850E_HIGHRES_TIMER
-          bool "High resolution timer support"
-          depends on V850E_TIMER_D
-   config TIME_BOOTUP
-          bool "Time bootup"
-          depends on V850E_HIGHRES_TIMER
-
-   config RESET_GUARD
-          bool "Reset Guard"
-
-source "mm/Kconfig"
-
-endmenu
-
-
-#############################################################################
-
-source init/Kconfig
-
-#############################################################################
-
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
-
-#    config PCI
-#          bool "PCI support"
-#          help
-#            Support for PCI bus.
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-#############################################################################
-
-source "drivers/base/Kconfig"
-
-source drivers/mtd/Kconfig
-
-source drivers/parport/Kconfig
-
-#source drivers/pnp/Kconfig
-
-source drivers/block/Kconfig
-
-#############################################################################
-
-menu "Disk device support"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-endmenu
-
-#############################################################################
-
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-#source "drivers/telephony/Kconfig"
-
-#
-# input before char - char/joystick depends on it. As does USB.
-#
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-#source drivers/misc/Config.in
-source "drivers/media/Kconfig"
-
-source "fs/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "arch/v850/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-#############################################################################
diff --git a/arch/v850/Kconfig.debug b/arch/v850/Kconfig.debug
deleted file mode 100644
index 4acfb9cca1ca..000000000000
--- a/arch/v850/Kconfig.debug
+++ /dev/null
@@ -1,10 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config NO_KERNEL_MSG
-        bool "Suppress Kernel BUG Messages"
-        help
-          Do not output any debug BUG messages within the kernel.
-
-endmenu
diff --git a/arch/v850/Makefile b/arch/v850/Makefile
deleted file mode 100644
index 8b629df0029a..000000000000
--- a/arch/v850/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# arch/v850/Makefile
-#
-#  Copyright (C) 2001,02,03,05  NEC Corporation
-#  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-arch_dir = arch/v850
-
-KBUILD_CFLAGS += -mv850e
-# r16 is a fixed pointer to the current task
-KBUILD_CFLAGS += -ffixed-r16 -mno-prolog-function
-KBUILD_CFLAGS += -fno-builtin
-KBUILD_CFLAGS += -D__linux__ -DUTS_SYSNAME=\"uClinux\"
-
-# By default, build a kernel that runs on the gdb v850 simulator.
-KBUILD_DEFCONFIG := sim_defconfig
-
-# This prevents the linker from consolidating the .gnu.linkonce.this_module
-# section into .text (which the v850 default linker script for -r does for
-# some reason)
-LDFLAGS_MODULE += --unique=.gnu.linkonce.this_module
-
-OBJCOPY_FLAGS_BLOB := -I binary -O elf32-little -B v850e
-
-
-head-y := $(arch_dir)/kernel/head.o $(arch_dir)/kernel/init_task.o
-core-y += $(arch_dir)/kernel/
-libs-y += $(arch_dir)/lib/
-
-
-# Deal with the initial contents of the root device
-ifdef ROOT_FS_IMAGE
-core-y += root_fs_image.o
-
-# Because the kernel build-system erases all explicit .o build rules, we
-# have to use an intermediate target to fool it into building for us.
-# This results in it being built anew each time, but that's alright.
-root_fs_image.o: root_fs_image_force
-
-root_fs_image_force: $(ROOT_FS_IMAGE)
-        $(OBJCOPY) $(OBJCOPY_FLAGS_BLOB) --rename-section .data=.root,alloc,load,readonly,data,contents $< root_fs_image.o
-endif
-
-CLEAN_FILES += root_fs_image.o
diff --git a/arch/v850/README b/arch/v850/README
deleted file mode 100644
index 12f7f7a665e0..000000000000
--- a/arch/v850/README
+++ /dev/null
@@ -1,44 +0,0 @@
-This port to the NEC V850E processor supports the following platforms:
-
-   "sim"
-        The gdb v850e simulator (CONFIG_V850E_SIM).
-
-   "rte-ma1-cb"
-        The Midas labs RTE-V850E/MA1-CB and RTE-V850E/NB85E-CB evaluation
-        boards (CONFIG_RTE_CB_MA1 and CONFIG_RTE_CB_NB85E).  This support
-        has only been tested when running with the Multi-debugger monitor
-        ROM (for the Green Hills Multi debugger).  The optional NEC
-        Solution Gear RTE-MOTHER-A motherboard is also supported, which
-        allows PCI boards to be used (CONFIG_RTE_MB_A_PCI).
-
-   "rte-me2-cb"
-        The Midas labs RTE-V850E/ME2-CB evaluation board (CONFIG_RTE_CB_ME2).
-        This has only been tested using a kernel downloaded via an ICE
-        connection using the Multi debugger.  Support for the RTE-MOTHER-A is
-        present, but hasn't been tested (unlike the other Midas labs cpu
-        boards, the RTE-V850E/ME2-CB includes an ethernet adaptor).
-
-   "as85ep1"
-        The NEC AS85EP1 V850E evaluation chip/board (CONFIG_V850E_AS85EP1).
-
-   "anna"
-        The NEC `Anna' (board/chip) implementation of the V850E2 processor
-        (CONFIG_V850E2_ANNA).
-
-   "sim85e2c", "sim85e2s"
-        The sim85e2c and sim85e2s simulators, which are verilog simulations
-        of the V850E2 NA85E2C/NA85E2S cpu cores (CONFIG_V850E2_SIM85E2C and
-        CONFIG_V850E2_SIM85E2S).
-
-   "fpga85e2c"
-        A FPGA implementation of the V850E2 NA85E2C cpu core
-        (CONFIG_V850E2_FPGA85E2C).
-
-To get a default kernel configuration for a particular platform, you can
-use a <platform>_defconfig make target (e.g., "make rte-me2-cb_defconfig");
-to see which default configurations are possible, look in the directory
-"arch/v850/configs".
-
-Porting to anything with a V850E/MA1 or MA2 processor should be simple.
-See the file <asm-v850/machdep.h> and the files it includes for an example of
-how to add platform/chip-specific support.
diff --git a/arch/v850/configs/rte-ma1-cb_defconfig b/arch/v850/configs/rte-ma1-cb_defconfig
deleted file mode 100644
index 1a5beda36e29..000000000000
--- a/arch/v850/configs/rte-ma1-cb_defconfig
+++ /dev/null
@@ -1,617 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:54:27 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-# CONFIG_V850E_SIM is not set
-CONFIG_RTE_CB_MA1=y
-# CONFIG_RTE_CB_NB85E is not set
-# CONFIG_RTE_CB_ME2 is not set
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-CONFIG_V850E_MA1=y
-CONFIG_RTE_CB=y
-CONFIG_RTE_CB_MULTI=y
-CONFIG_RTE_CB_MULTI_DBTRAP=y
-# CONFIG_RTE_CB_MA1_KSRAM is not set
-CONFIG_RTE_MB_A_PCI=y
-CONFIG_RTE_GBUS_INT=y
-CONFIG_PCI=y
-CONFIG_V850E_INTC=y
-CONFIG_V850E_TIMER_D=y
-# CONFIG_V850E_CACHE is not set
-# CONFIG_V850E2_CACHE is not set
-CONFIG_NO_CACHE=y
-CONFIG_ZERO_BSS=y
-# CONFIG_V850E_HIGHRES_TIMER is not set
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NE2000 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_V850E_UART=y
-CONFIG_V850E_UART_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/configs/rte-me2-cb_defconfig b/arch/v850/configs/rte-me2-cb_defconfig
deleted file mode 100644
index 15e666478061..000000000000
--- a/arch/v850/configs/rte-me2-cb_defconfig
+++ /dev/null
@@ -1,462 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:47:50 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-# CONFIG_V850E_SIM is not set
-# CONFIG_RTE_CB_MA1 is not set
-# CONFIG_RTE_CB_NB85E is not set
-CONFIG_RTE_CB_ME2=y
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-CONFIG_V850E_ME2=y
-CONFIG_RTE_CB=y
-# CONFIG_RTE_MB_A_PCI is not set
-# CONFIG_PCI is not set
-CONFIG_V850E_INTC=y
-CONFIG_V850E_TIMER_D=y
-CONFIG_V850E_CACHE=y
-# CONFIG_V850E2_CACHE is not set
-# CONFIG_NO_CACHE is not set
-# CONFIG_ROM_KERNEL is not set
-CONFIG_ZERO_BSS=y
-# CONFIG_V850E_HIGHRES_TIMER is not set
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_V850E_UART is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/configs/sim_defconfig b/arch/v850/configs/sim_defconfig
deleted file mode 100644
index f31ba7398ad0..000000000000
--- a/arch/v850/configs/sim_defconfig
+++ /dev/null
@@ -1,451 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:36:43 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-CONFIG_V850E_SIM=y
-# CONFIG_RTE_CB_MA1 is not set
-# CONFIG_RTE_CB_NB85E is not set
-# CONFIG_RTE_CB_ME2 is not set
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-# CONFIG_PCI is not set
-# CONFIG_V850E_INTC is not set
-# CONFIG_V850E_TIMER_D is not set
-# CONFIG_V850E_CACHE is not set
-# CONFIG_V850E2_CACHE is not set
-CONFIG_NO_CACHE=y
-CONFIG_ZERO_BSS=y
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/kernel/Makefile b/arch/v850/kernel/Makefile
deleted file mode 100644
index da5889c53576..000000000000
--- a/arch/v850/kernel/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# arch/v850/kernel/Makefile
-#
-#  Copyright (C) 2001,02,03  NEC Electronics Corporation
-#  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-extra-y := head.o init_task.o vmlinux.lds
-
-obj-y += intv.o entry.o process.o syscalls.o time.o setup.o \
-         signal.o irq.o mach.o ptrace.o bug.o
-obj-$(CONFIG_MODULES)           += module.o v850_ksyms.o
-# chip-specific code
-obj-$(CONFIG_V850E_MA1)         += ma.o
-obj-$(CONFIG_V850E_ME2)         += me2.o
-obj-$(CONFIG_V850E_TEG)         += teg.o
-obj-$(CONFIG_V850E_AS85EP1)     += as85ep1.o
-obj-$(CONFIG_V850E2_ANNA)       += anna.o
-# platform-specific code
-obj-$(CONFIG_V850E_SIM)         += sim.o simcons.o
-obj-$(CONFIG_V850E2_SIM85E2)    += sim85e2.o memcons.o
-obj-$(CONFIG_V850E2_FPGA85E2C)  += fpga85e2c.o memcons.o
-obj-$(CONFIG_RTE_CB)            += rte_cb.o rte_cb_leds.o
-obj-$(CONFIG_RTE_CB_MA1)        += rte_ma1_cb.o
-obj-$(CONFIG_RTE_CB_ME2)        += rte_me2_cb.o
-obj-$(CONFIG_RTE_CB_NB85E)      += rte_nb85e_cb.o
-obj-$(CONFIG_RTE_CB_MULTI)      += rte_cb_multi.o
-obj-$(CONFIG_RTE_MB_A_PCI)      += rte_mb_a_pci.o
-obj-$(CONFIG_RTE_GBUS_INT)      += gbus_int.o
-# feature-specific code
-obj-$(CONFIG_V850E_INTC)        += v850e_intc.o
-obj-$(CONFIG_V850E_TIMER_D)     += v850e_timer_d.o v850e_utils.o
-obj-$(CONFIG_V850E_CACHE)       += v850e_cache.o
-obj-$(CONFIG_V850E2_CACHE)      += v850e2_cache.o
-obj-$(CONFIG_V850E_HIGHRES_TIMER) += highres_timer.o
-obj-$(CONFIG_PROC_FS)           += procfs.o
diff --git a/arch/v850/kernel/anna-rom.ld b/arch/v850/kernel/anna-rom.ld
deleted file mode 100644
index 7c54e7e3f1b1..000000000000
--- a/arch/v850/kernel/anna-rom.ld
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-        /* 8MB of flash ROM.  */
-        ROM   : ORIGIN = 0,          LENGTH = 0x00800000
-
-        /* 1MB of static RAM.  This memory is mirrored 64 times.  */
-        SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-        /* 64MB of DRAM.  */
-        SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-        ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c
deleted file mode 100644
index 5978a25170fb..000000000000
--- a/arch/v850/kernel/anna.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/v850/kernel/anna.c -- Anna V850E2 evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START       SRAM_ADDR
-#define RAM_END         (SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT       0
-
-
-static void anna_led_tick (void);
-
-
-void __init mach_early_init (void)
-{
-        ANNA_ILBEN    = 0;
-
-        V850E2_CSC(0) = 0x402F;
-        V850E2_CSC(1) = 0x4000;
-        V850E2_BPC    = 0;
-        V850E2_BSC    = 0xAAAA;
-        V850E2_BEC    = 0;
-
-#if 0
-        V850E2_BHC    = 0xFFFF; /* icache all memory, dcache all */
-#else
-        V850E2_BHC    = 0;      /* cache no memory */
-#endif
-        V850E2_BCT(0) = 0xB088;
-        V850E2_BCT(1) = 0x0008;
-        V850E2_DWC(0) = 0x0027;
-        V850E2_DWC(1) = 0;
-        V850E2_BCC    = 0x0006;
-        V850E2_ASC    = 0;
-        V850E2_LBS    = 0x0089;
-        V850E2_SCR(3) = 0x21A9;
-        V850E2_RFS(3) = 0x8121;
-
-        v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-        ANNA_PORT_PM (LEDS_PORT) = 0;   /* Make all LED pins output pins.  */
-        mach_tick = anna_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-                                   unsigned long *ram_len)
-{
-        *ram_start = RAM_START;
-        *ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-        /* The space between SRAM and SDRAM is filled with duplicate
-           images of SRAM.  Prevent the kernel from using them.  */
-        reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-                         SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-                         BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-        tv->tv_sec = 0;
-        tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-        /* Start hardware timer.  */
-        v850e_timer_d_configure (0, HZ);
-        /* Install timer interrupt handler.  */
-        setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-        { "IRQ", 0,             NUM_MACH_IRQS,  1, 7 },
-        { "PIN", IRQ_INTP(0),   IRQ_INTP_NUM,   1, 4 },
-        { "CCC", IRQ_INTCCC(0), IRQ_INTCCC_NUM, 1, 5 },
-        { "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM, 1, 5 },
-        { "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM, 1, 2 },
-        { "DMXER", IRQ_INTDMXER,1,              1, 2 },
-        { "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM, 3, 3 },
-        { "SR",  IRQ_INTSR(0),  IRQ_INTSR_NUM,  3, 4 },
-        { "ST",  IRQ_INTST(0),  IRQ_INTST_NUM,  3, 5 },
-        { 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-        v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-        disable_reset_guard ();
-#endif
-        asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-        disable_reset_guard ();
-#endif
-        local_irq_disable ();   /* Ignore all interrupts.  */
-        ANNA_PORT_IO(LEDS_PORT) = 0xAA; /* Note that we halted.  */
-        for (;;)
-                asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-        machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void anna_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-        /* The Anna connects some general-purpose I/O pins on the CPU to
-           the RTS/CTS lines of UART 1's serial connection.  I/O pins P07
-           and P37 are RTS and CTS respectively.  */
-        if (chan == 1) {
-                ANNA_PORT_PM(0) &= ~0x80; /* P07 in output mode */
-                ANNA_PORT_PM(3) |=  0x80; /* P37 in input mode */
-        }
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  We can't use the last bit because it's used for
-   UART0's CTS output.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 6
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-        (HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void anna_led_tick ()
-{
-        static unsigned counter = 0;
-        
-        if (++counter == TICKS_PER_FRAME) {
-                static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-                if (dir > 0 && pos == max_pos) {
-                        dir = -1;
-                        if (max_pos == MIN_MAX_POS)
-                                max_pos = MAX_MAX_POS;
-                        else
-                                max_pos--;
-                } else {
-                        if (dir < 0 && pos == 0)
-                                dir = 1;
-
-                        if (pos + dir <= max_pos) {
-                                /* Each bit of port 0 has a LED. */
-                                clear_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-                                pos += dir;
-                                set_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-                        }
-                }
-
-                counter = 0;
-        }
-}
diff --git a/arch/v850/kernel/anna.ld b/arch/v850/kernel/anna.ld
deleted file mode 100644
index df7f80f2833d..000000000000
--- a/arch/v850/kernel/anna.ld
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA).  */
-
-MEMORY {
-        /* 256KB of internal memory (followed by one mirror).  */
-        iMEM0 : ORIGIN = 0,          LENGTH = 0x00040000
-        /* 256KB of internal memory (followed by one mirror).  */
-        iMEM1 : ORIGIN = 0x00040000, LENGTH = 0x00040000
-
-        /* 1MB of static RAM.  This memory is mirrored 64 times.  */
-        SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-        /* 64MB of DRAM.  */
-        SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-        .intv : { INTV_CONTENTS } > iMEM0
-        .sram : { RAMK_KRAM_CONTENTS } > SRAM
-        .root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/as85ep1-rom.ld b/arch/v850/kernel/as85ep1-rom.ld
deleted file mode 100644
index fe2a9a3ab525..000000000000
--- a/arch/v850/kernel/as85ep1-rom.ld
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-        /* 4MB of flash ROM.  */
-        ROM   : ORIGIN = 0,          LENGTH = 0x00400000
-
-        /* 1MB of static RAM.  */
-        SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-        /* About 58MB of DRAM.  This can actually be at one of two
-           positions, determined by jumper JP3; we have to use the first
-           position because the second is partially out of processor
-           instruction addressing range (though in the second position
-           there's actually 64MB available).  */
-        SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-        ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/as85ep1.c b/arch/v850/kernel/as85ep1.c
deleted file mode 100644
index b525ecf3aea4..000000000000
--- a/arch/v850/kernel/as85ep1.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * arch/v850/kernel/as85ep1.c -- AS85EP1 V850E evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START       SRAM_ADDR
-#define RAM_END         (SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT       4
-
-
-static void as85ep1_led_tick (void);
-
-extern char _intv_copy_src_start, _intv_copy_src_end;
-extern char _intv_copy_dst_start;
-
-
-void __init mach_early_init (void)
-{
-#ifndef CONFIG_ROM_KERNEL
-        const u32 *src;
-        register u32 *dst asm ("ep");
-#endif
-
-        AS85EP1_CSC(0) = 0x0403;
-        AS85EP1_BCT(0) = 0xB8B8;
-        AS85EP1_DWC(0) = 0x0104;
-        AS85EP1_BCC    = 0x0012;
-        AS85EP1_ASC    = 0;
-        AS85EP1_LBS    = 0x00A9;
-
-        AS85EP1_PORT_PMC(6)  = 0xFF; /* valid A0,A1,A20-A25 */
-        AS85EP1_PORT_PMC(7)  = 0x0E; /* valid CS1-CS3       */
-        AS85EP1_PORT_PMC(9)  = 0xFF; /* valid D16-D23       */
-        AS85EP1_PORT_PMC(10) = 0xFF; /* valid D24-D31       */
-
-        AS85EP1_RFS(1) = 0x800c;
-        AS85EP1_RFS(3) = 0x800c;
-        AS85EP1_SCR(1) = 0x20A9;
-        AS85EP1_SCR(3) = 0x20A9;
-
-#ifndef CONFIG_ROM_KERNEL
-        /* The early chip we have is buggy, and writing the interrupt
-           vectors into low RAM may screw up, so for non-ROM kernels, we
-           only rely on the reset vector being downloaded, and copy the
-           rest of the interrupt vectors into place here.  The specific bug
-           is that writing address N, where (N & 0x10) == 0x10, will _also_
-           write to address (N - 0x10).  We avoid this (effectively) by
-           writing in 16-byte chunks backwards from the end.  */
-
-        AS85EP1_IRAMM = 0x3;    /* "write-mode" for the internal instruction memory */
-
-        src = (u32 *)(((u32)&_intv_copy_src_end - 1) & ~0xF);
-        dst = (u32 *)&_intv_copy_dst_start
-                + (src - (u32 *)&_intv_copy_src_start);
-        do {
-                u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-                dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-                dst -= 4;
-                src -= 4;
-        } while (src > (u32 *)&_intv_copy_src_start);
-
-        AS85EP1_IRAMM = 0x0;    /* "read-mode" for the internal instruction memory */
-#endif /* !CONFIG_ROM_KERNEL */
-
-        v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-        AS85EP1_PORT_PMC (LEDS_PORT) = 0; /* Make the LEDs port an I/O port. */
-        AS85EP1_PORT_PM (LEDS_PORT) = 0; /* Make all the bits output pins.  */
-        mach_tick = as85ep1_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-                                   unsigned long *ram_len)
-{
-        *ram_start = RAM_START;
-        *ram_len = RAM_END - RAM_START;
-}
-
-/* Convenience macros.  */
-#define SRAM_END        (SRAM_ADDR + SRAM_SIZE)
-#define SDRAM_END       (SDRAM_ADDR + SDRAM_SIZE)
-
-void __init mach_reserve_bootmem ()
-{
-        if (SDRAM_ADDR < RAM_END && SDRAM_ADDR > RAM_START)
-                /* We can't use the space between SRAM and SDRAM, so
-                   prevent the kernel from trying.  */
-                reserve_bootmem(SRAM_END, SDRAM_ADDR - SRAM_END,
-                                BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-        tv->tv_sec = 0;
-        tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-        /* Start hardware timer.  */
-        v850e_timer_d_configure (0, HZ);
-        /* Install timer interrupt handler.  */
-        setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-        { "IRQ", 0,             NUM_MACH_IRQS,  1, 7 },
-        { "CCC", IRQ_INTCCC(0), IRQ_INTCCC_NUM, 1, 5 },
-        { "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM, 1, 5 },
-        { "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM, 3, 3 },
-        { "SR",  IRQ_INTSR(0),  IRQ_INTSR_NUM,  3, 4 },
-        { "ST",  IRQ_INTST(0),  IRQ_INTST_NUM,  3, 5 },
-        { 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-        v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-        disable_reset_guard ();
-#endif
-        asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-        disable_reset_guard ();
-#endif
-        local_irq_disable ();   /* Ignore all interrupts.  */
-        AS85EP1_PORT_IO (LEDS_PORT) = 0xAA;     /* Note that we halted.  */
-        for (;;)
-                asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-        machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void as85ep1_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-        /* Make the shared uart/port pins be uart pins.  */
-        AS85EP1_PORT_PMC(3) |= (0x5 << chan);
-
-        /* The AS85EP1 connects some general-purpose I/O pins on the CPU to
-           the RTS/CTS lines of UART 1's serial connection.  I/O pins P53
-           and P54 are RTS and CTS respectively.  */
-        if (chan == 1) {
-                /* Put P53 & P54 in I/O port mode.  */
-                AS85EP1_PORT_PMC(5) &= ~0x18;
-                /* Make P53 an output, and P54 an input.  */
-                AS85EP1_PORT_PM(5) |=  0x10;
-        }
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 7
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-        (HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void as85ep1_led_tick ()
-{
-        static unsigned counter = 0;
-        
-        if (++counter == TICKS_PER_FRAME) {
-                static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-                if (dir > 0 && pos == max_pos) {
-                        dir = -1;
-                        if (max_pos == MIN_MAX_POS)
-                                max_pos = MAX_MAX_POS;
-                        else
-                                max_pos--;
-                } else {
-                        if (dir < 0 && pos == 0)
-                                dir = 1;
-
-                        if (pos + dir <= max_pos) {
-                                /* Each bit of port 0 has a LED. */
-                                set_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-                                pos += dir;
-                                clear_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-                        }
-                }
-
-                counter = 0;
-        }
-}
diff --git a/arch/v850/kernel/as85ep1.ld b/arch/v850/kernel/as85ep1.ld
deleted file mode 100644
index ef2c4399063e..000000000000
--- a/arch/v850/kernel/as85ep1.ld
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1).  */
-
-MEMORY {
-        /* 1MB of internal instruction memory. */
-        iMEM0 : ORIGIN = 0,          LENGTH = 0x00100000
-
-        /* 1MB of static RAM.  */
-        SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-        /* About 58MB of DRAM.  This can actually be at one of two
-           positions, determined by jump JP3; we have to use the first
-           position because the second is partially out of processor
-           instruction addressing range (though in the second position
-           there's actually 64MB available).  */
-        SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-        .resetv : {
-                __intv_start = . ;
-                        *(.intv.reset)  /* Reset vector */
-        } > iMEM0
-
-        .sram : {
-                RAMK_KRAM_CONTENTS
-
-                /* We stick most of the interrupt vectors here; they'll be
-                   copied into the proper location by the early init code (we
-                   can't put them directly in the right place because of
-                   hardware bugs).  The vectors shouldn't need to be
-                   relocated, so we don't have to use `> ...  AT> ...' to
-                   split the load/vm addresses (and we can't because of
-                   problems with the loader).  */
-                . = ALIGN (0x10) ;
-                __intv_copy_src_start = . ;
-                        *(.intv.common) /* Vectors common to all v850e proc. */
-                        *(.intv.mach)   /* Machine-specific int. vectors.  */
-                . = ALIGN (0x10) ;
-                __intv_copy_src_end = . ;
-        } > SRAM
-
-        /* Where we end up putting the vectors.  */
-        __intv_copy_dst_start = 0x10 ;
-        __intv_copy_dst_end = __intv_copy_dst_start + (__intv_copy_src_end - __intv_copy_src_start) ;
-        __intv_end = __intv_copy_dst_end ;
-
-        .root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/asm-offsets.c b/arch/v850/kernel/asm-offsets.c
deleted file mode 100644
index 581e6986a776..000000000000
--- a/arch/v850/kernel/asm-offsets.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/kbuild.h>
-
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-int main (void)
-{
-        /* offsets into the task struct */
-        DEFINE (TASK_STATE, offsetof (struct task_struct, state));
-        DEFINE (TASK_FLAGS, offsetof (struct task_struct, flags));
-        DEFINE (TASK_PTRACE, offsetof (struct task_struct, ptrace));
-        DEFINE (TASK_BLOCKED, offsetof (struct task_struct, blocked));
-        DEFINE (TASK_THREAD, offsetof (struct task_struct, thread));
-        DEFINE (TASK_THREAD_INFO, offsetof (struct task_struct, stack));
-        DEFINE (TASK_MM, offsetof (struct task_struct, mm));
-        DEFINE (TASK_ACTIVE_MM, offsetof (struct task_struct, active_mm));
-        DEFINE (TASK_PID, offsetof (struct task_struct, pid));
-
-        /* offsets into the kernel_stat struct */
-        DEFINE (STAT_IRQ, offsetof (struct kernel_stat, irqs));
-
-
-        /* signal defines */
-        DEFINE (SIGSEGV, SIGSEGV);
-        DEFINE (SEGV_MAPERR, SEGV_MAPERR);
-        DEFINE (SIGTRAP, SIGTRAP);
-        DEFINE (SIGCHLD, SIGCHLD);
-        DEFINE (SIGILL, SIGILL);
-        DEFINE (TRAP_TRACE, TRAP_TRACE);
-
-        /* ptrace flag bits */
-        DEFINE (PT_PTRACED, PT_PTRACED);
-        DEFINE (PT_DTRACE, PT_DTRACE);
-
-        /* error values */
-        DEFINE (ENOSYS, ENOSYS);
-
-        /* clone flag bits */
-        DEFINE (CLONE_VFORK, CLONE_VFORK);
-        DEFINE (CLONE_VM, CLONE_VM);
-
-        return 0;
-}
diff --git a/arch/v850/kernel/bug.c b/arch/v850/kernel/bug.c
deleted file mode 100644
index c78cf750915a..000000000000
--- a/arch/v850/kernel/bug.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * arch/v850/kernel/bug.c -- Bug reporting functions
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/current.h>
-
-/* We should use __builtin_return_address, but it doesn't work in gcc-2.90
-   (which is currently our standard compiler on the v850).  */
-#define ret_addr() ({ register u32 lp asm ("lp"); lp; })
-#define stack_addr() ({ register u32 sp asm ("sp"); sp; })
-
-void __bug ()
-{
-        printk (KERN_CRIT "kernel BUG at PC 0x%x (SP ~0x%x)!\n",
-                ret_addr() - 4, /* - 4 for `jarl' */
-                stack_addr());
-        machine_halt ();
-}
-
-int bad_trap (int trap_num, struct pt_regs *regs)
-{
-        printk (KERN_CRIT
-                "unimplemented trap %d called at 0x%08lx, pid %d!\n",
-                trap_num, regs->pc, current->pid);
-        return -ENOSYS;
-}
-
-#ifdef CONFIG_RESET_GUARD
-void unexpected_reset (unsigned long ret_addr, unsigned long kmode,
-                       struct task_struct *task, unsigned long sp)
-{
-        printk (KERN_CRIT
-                "unexpected reset in %s mode, pid %d"
-                " (ret_addr = 0x%lx, sp = 0x%lx)\n",
-                kmode ? "kernel" : "user",
-                task ? task->pid : -1,
-                ret_addr, sp);
-
-        machine_halt ();
-}
-#endif /* CONFIG_RESET_GUARD */
-
-
-
-struct spec_reg_name {
-        const char *name;
-        int gpr;
-};
-
-struct spec_reg_name spec_reg_names[] = {
-        { "sp", GPR_SP },
-        { "gp", GPR_GP },
-        { "tp", GPR_TP },
-        { "ep", GPR_EP },
-        { "lp", GPR_LP },
-        { 0, 0 }
-};
-
-void show_regs (struct pt_regs *regs)
-{
-        int gpr_base, gpr_offs;
-
-        printk ("     pc 0x%08lx    psw 0x%08lx                       kernel_mode %d\n",
-                regs->pc, regs->psw, regs->kernel_mode);
-        printk ("   ctpc 0x%08lx  ctpsw 0x%08lx   ctbp 0x%08lx\n",
-                regs->ctpc, regs->ctpsw, regs->ctbp);
-
-        for (gpr_base = 0; gpr_base < NUM_GPRS; gpr_base += 4) {
-                for (gpr_offs = 0; gpr_offs < 4; gpr_offs++) {
-                        int gpr = gpr_base + gpr_offs;
-                        long val = regs->gpr[gpr];
-                        struct spec_reg_name *srn;
-
-                        for (srn = spec_reg_names; srn->name; srn++)
-                                if (srn->gpr == gpr)
-                                        break;
-
-                        if (srn->name)
-                                printk ("%7s 0x%08lx", srn->name, val);
-                        else
-                                printk ("    r%02d 0x%08lx", gpr, val);
-                }
-
-                printk ("\n");
-        }
-}
-
-/*
- * TASK is a pointer to the task whose backtrace we want to see (or NULL
- * for current task), SP is the stack pointer of the first frame that
- * should be shown in the back trace (or NULL if the entire call-chain of
- * the task should be shown).
- */
-void show_stack (struct task_struct *task, unsigned long *sp)
-{
-        unsigned long addr, end;
-
-        if (sp)
-                addr = (unsigned long)sp;
-        else if (task)
-                addr = task_sp (task);
-        else
-                addr = stack_addr ();
-
-        addr = addr & ~3;
-        end = (addr + THREAD_SIZE - 1) & THREAD_MASK;
-
-        while (addr < end) {
-                printk ("%8lX: ", addr);
-                while (addr < end) {
-                        printk (" %8lX", *(unsigned long *)addr);
-                        addr += sizeof (unsigned long);
-                        if (! (addr & 0xF))
-                                break;
-                }
-                printk ("\n");
-        }
-}
-
-void dump_stack ()
-{
-        show_stack (0, 0);
-}
-
-EXPORT_SYMBOL(dump_stack);
diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S
deleted file mode 100644
index e4327a8d6bcd..000000000000
--- a/arch/v850/kernel/entry.S
+++ /dev/null
@@ -1,1121 +0,0 @@
-/*
- * arch/v850/kernel/entry.S -- Low-level system-call handling, trap handlers,
- *      and context-switching
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/sys.h>
-
-#include <asm/entry.h>
-#include <asm/current.h>
-#include <asm/thread_info.h>
-#include <asm/clinkage.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-#include <asm/asm-offsets.h>
-
-
-/* Make a slightly more convenient alias for C_SYMBOL_NAME.  */
-#define CSYM    C_SYMBOL_NAME
-
-
-/* The offset of the struct pt_regs in a state-save-frame on the stack.  */
-#define PTO     STATE_SAVE_PT_OFFSET
-
-
-/* Save argument registers to the state-save-frame pointed to by EP.  */
-#define SAVE_ARG_REGS                                                         \
-        sst.w   r6, PTO+PT_GPR(6)[ep];                                        \
-        sst.w   r7, PTO+PT_GPR(7)[ep];                                        \
-        sst.w   r8, PTO+PT_GPR(8)[ep];                                        \
-        sst.w   r9, PTO+PT_GPR(9)[ep]
-/* Restore argument registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_ARG_REGS                                                      \
-        sld.w   PTO+PT_GPR(6)[ep], r6;                                        \
-        sld.w   PTO+PT_GPR(7)[ep], r7;                                        \
-        sld.w   PTO+PT_GPR(8)[ep], r8;                                        \
-        sld.w   PTO+PT_GPR(9)[ep], r9
-
-/* Save value return registers to the state-save-frame pointed to by EP.  */
-#define SAVE_RVAL_REGS                                                        \
-        sst.w   r10, PTO+PT_GPR(10)[ep];                                      \
-        sst.w   r11, PTO+PT_GPR(11)[ep]
-/* Restore value return registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_RVAL_REGS                                                     \
-        sld.w   PTO+PT_GPR(10)[ep], r10;                                      \
-        sld.w   PTO+PT_GPR(11)[ep], r11
-
-
-#define SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS                                  \
-        sst.w   r1, PTO+PT_GPR(1)[ep];                                        \
-        sst.w   r5, PTO+PT_GPR(5)[ep]
-#define SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL                                   \
-        sst.w   r12, PTO+PT_GPR(12)[ep];                                      \
-        sst.w   r13, PTO+PT_GPR(13)[ep];                                      \
-        sst.w   r14, PTO+PT_GPR(14)[ep];                                      \
-        sst.w   r15, PTO+PT_GPR(15)[ep];                                      \
-        sst.w   r16, PTO+PT_GPR(16)[ep];                                      \
-        sst.w   r17, PTO+PT_GPR(17)[ep];                                      \
-        sst.w   r18, PTO+PT_GPR(18)[ep];                                      \
-        sst.w   r19, PTO+PT_GPR(19)[ep]
-#define RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS                               \
-        sld.w   PTO+PT_GPR(1)[ep], r1;                                        \
-        sld.w   PTO+PT_GPR(5)[ep], r5
-#define RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL                                \
-        sld.w   PTO+PT_GPR(12)[ep], r12;                                      \
-        sld.w   PTO+PT_GPR(13)[ep], r13;                                      \
-        sld.w   PTO+PT_GPR(14)[ep], r14;                                      \
-        sld.w   PTO+PT_GPR(15)[ep], r15;                                      \
-        sld.w   PTO+PT_GPR(16)[ep], r16;                                      \
-        sld.w   PTO+PT_GPR(17)[ep], r17;                                      \
-        sld.w   PTO+PT_GPR(18)[ep], r18;                                      \
-        sld.w   PTO+PT_GPR(19)[ep], r19
-
-/* Save `call clobbered' registers to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_CLOBBERED_REGS                                              \
-        SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS;                                 \
-        SAVE_ARG_REGS;                                                        \
-        SAVE_RVAL_REGS;                                                       \
-        SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
-/* Restore `call clobbered' registers from the state-save-frame pointed to
-   by EP.  */
-#define RESTORE_CALL_CLOBBERED_REGS                                           \
-        RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS;                              \
-        RESTORE_ARG_REGS;                                                     \
-        RESTORE_RVAL_REGS;                                                    \
-        RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
-
-/* Save `call clobbered' registers except for the return-value registers
-   to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_CLOBBERED_REGS_NO_RVAL                                      \
-        SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS;                                 \
-        SAVE_ARG_REGS;                                                        \
-        SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
-/* Restore `call clobbered' registers except for the return-value registers
-   from the state-save-frame pointed to by EP.  */
-#define RESTORE_CALL_CLOBBERED_REGS_NO_RVAL                                   \
-        RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS;                              \
-        RESTORE_ARG_REGS;                                                     \
-        RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
-
-/* Save `call saved' registers to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_SAVED_REGS                                                  \
-        sst.w   r2, PTO+PT_GPR(2)[ep];                                        \
-        sst.w   r20, PTO+PT_GPR(20)[ep];                                      \
-        sst.w   r21, PTO+PT_GPR(21)[ep];                                      \
-        sst.w   r22, PTO+PT_GPR(22)[ep];                                      \
-        sst.w   r23, PTO+PT_GPR(23)[ep];                                      \
-        sst.w   r24, PTO+PT_GPR(24)[ep];                                      \
-        sst.w   r25, PTO+PT_GPR(25)[ep];                                      \
-        sst.w   r26, PTO+PT_GPR(26)[ep];                                      \
-        sst.w   r27, PTO+PT_GPR(27)[ep];                                      \
-        sst.w   r28, PTO+PT_GPR(28)[ep];                                      \
-        sst.w   r29, PTO+PT_GPR(29)[ep]
-/* Restore `call saved' registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_CALL_SAVED_REGS                                               \
-        sld.w   PTO+PT_GPR(2)[ep], r2;                                        \
-        sld.w   PTO+PT_GPR(20)[ep], r20;                                      \
-        sld.w   PTO+PT_GPR(21)[ep], r21;                                      \
-        sld.w   PTO+PT_GPR(22)[ep], r22;                                      \
-        sld.w   PTO+PT_GPR(23)[ep], r23;                                      \
-        sld.w   PTO+PT_GPR(24)[ep], r24;                                      \
-        sld.w   PTO+PT_GPR(25)[ep], r25;                                      \
-        sld.w   PTO+PT_GPR(26)[ep], r26;                                      \
-        sld.w   PTO+PT_GPR(27)[ep], r27;                                      \
-        sld.w   PTO+PT_GPR(28)[ep], r28;                                      \
-        sld.w   PTO+PT_GPR(29)[ep], r29
-
-
-/* Save the PC stored in the special register SAVEREG to the state-save-frame
-   pointed to by EP.  r19 is clobbered.  */
-#define SAVE_PC(savereg)                                                      \
-        stsr    SR_ ## savereg, r19;                                          \
-        sst.w   r19, PTO+PT_PC[ep]
-/* Restore the PC from the state-save-frame pointed to by EP, to the special
-   register SAVEREG.  LP is clobbered (it is used as a scratch register
-   because the POP_STATE macro restores it, and this macro is usually used
-   inside POP_STATE).  */
-#define RESTORE_PC(savereg)                                                   \
-        sld.w   PTO+PT_PC[ep], lp;                                            \
-        ldsr    lp, SR_ ## savereg
-/* Save the PSW register stored in the special register SAVREG to the
-   state-save-frame pointed to by EP.  r19 is clobbered.  */
-#define SAVE_PSW(savereg)                                                     \
-        stsr    SR_ ## savereg, r19;                                          \
-        sst.w   r19, PTO+PT_PSW[ep]
-/* Restore the PSW register from the state-save-frame pointed to by EP, to
-   the special register SAVEREG.  LP is clobbered (it is used as a scratch
-   register because the POP_STATE macro restores it, and this macro is
-   usually used inside POP_STATE).  */
-#define RESTORE_PSW(savereg)                                                  \
-        sld.w   PTO+PT_PSW[ep], lp;                                           \
-        ldsr    lp, SR_ ## savereg
-
-/* Save CTPC/CTPSW/CTBP registers to the state-save-frame pointed to by REG.
-   r19 is clobbered.  */
-#define SAVE_CT_REGS                                                          \
-        stsr    SR_CTPC, r19;                                                 \
-        sst.w   r19, PTO+PT_CTPC[ep];                                         \
-        stsr    SR_CTPSW, r19;                                                \
-        sst.w   r19, PTO+PT_CTPSW[ep];                                        \
-        stsr    SR_CTBP, r19;                                                 \
-        sst.w   r19, PTO+PT_CTBP[ep]
-/* Restore CTPC/CTPSW/CTBP registers from the state-save-frame pointed to by EP.
-   LP is clobbered (it is used as a scratch register because the POP_STATE
-   macro restores it, and this macro is usually used inside POP_STATE).  */
-#define RESTORE_CT_REGS                                                       \
-        sld.w   PTO+PT_CTPC[ep], lp;                                          \
-        ldsr    lp, SR_CTPC;                                                  \
-        sld.w   PTO+PT_CTPSW[ep], lp;                                         \
-        ldsr    lp, SR_CTPSW;                                                 \
-        sld.w   PTO+PT_CTBP[ep], lp;                                          \
-        ldsr    lp, SR_CTBP
-
-
-/* Push register state, except for the stack pointer, on the stack in the
-   form of a state-save-frame (plus some extra padding), in preparation for
-   a system call.  This macro makes sure that the EP, GP, and LP
-   registers are saved, and TYPE identifies the set of extra registers to
-   be saved as well.  Also copies (the new value of) SP to EP.  */
-#define PUSH_STATE(type)                                                      \
-        addi    -STATE_SAVE_SIZE, sp, sp; /* Make room on the stack.  */      \
-        st.w    ep, PTO+PT_GPR(GPR_EP)[sp];                                   \
-        mov     sp, ep;                                                       \
-        sst.w   gp, PTO+PT_GPR(GPR_GP)[ep];                                   \
-        sst.w   lp, PTO+PT_GPR(GPR_LP)[ep];                                   \
-        type ## _STATE_SAVER
-/* Pop a register state pushed by PUSH_STATE, except for the stack pointer,
-   from the stack.  */
-#define POP_STATE(type)                                                       \
-        mov     sp, ep;                                                       \
-        type ## _STATE_RESTORER;                                              \
-        sld.w   PTO+PT_GPR(GPR_GP)[ep], gp;                                   \
-        sld.w   PTO+PT_GPR(GPR_LP)[ep], lp;                                   \
-        sld.w   PTO+PT_GPR(GPR_EP)[ep], ep;                                   \
-        addi    STATE_SAVE_SIZE, sp, sp /* Clean up our stack space.  */
-
-
-/* Switch to the kernel stack if necessary, and push register state on the
-   stack in the form of a state-save-frame.  Also load the current task
-   pointer if switching from user mode.  The stack-pointer (r3) should have
-   already been saved to the memory location SP_SAVE_LOC (the reason for
-   this is that the interrupt vectors may be beyond a 22-bit signed offset
-   jump from the actual interrupt handler, and this allows them to save the
-   stack-pointer and use that register to do an indirect jump).  This macro
-   makes sure that `special' registers, system registers, and the stack
-   pointer are saved; TYPE identifies the set of extra registers to be
-   saved as well.  SYSCALL_NUM is the register in which the system-call
-   number this state is for is stored (r0 if this isn't a system call).
-   Interrupts should already be disabled when calling this.  */
-#define SAVE_STATE(type, syscall_num, sp_save_loc)                            \
-        tst1    0, KM;                  /* See if already in kernel mode.  */ \
-        bz      1f;                                                           \
-        ld.w    sp_save_loc, sp;        /* ... yes, use saved SP.  */         \
-        br      2f;                                                           \
-1:      ld.w    KSP, sp;                /* ... no, switch to kernel stack. */ \
-2:      PUSH_STATE(type);                                                     \
-        ld.b    KM, r19;                /* Remember old kernel-mode.  */      \
-        sst.w   r19, PTO+PT_KERNEL_MODE[ep];                                  \
-        ld.w    sp_save_loc, r19;       /* Remember old SP.  */               \
-        sst.w   r19, PTO+PT_GPR(GPR_SP)[ep];                                  \
-        mov     1, r19;                 /* Now definitely in kernel-mode. */  \
-        st.b    r19, KM;                                                      \
-        GET_CURRENT_TASK(CURRENT_TASK); /* Fetch the current task pointer. */ \
-        /* Save away the syscall number.  */                                  \
-        sst.w   syscall_num, PTO+PT_CUR_SYSCALL[ep]
-
-
-/* Save register state not normally saved by PUSH_STATE for TYPE, to the
-   state-save-frame on the stack; also copies SP to EP.  r19 may be trashed. */
-#define SAVE_EXTRA_STATE(type)                                                \
-        mov     sp, ep;                                                       \
-        type ## _EXTRA_STATE_SAVER
-/* Restore register state not normally restored by POP_STATE for TYPE,
-   from the state-save-frame on the stack; also copies SP to EP.
-   r19 may be trashed.  */
-#define RESTORE_EXTRA_STATE(type)                                             \
-        mov     sp, ep;                                                       \
-        type ## _EXTRA_STATE_RESTORER
-
-/* Save any call-clobbered registers not normally saved by PUSH_STATE for
-   TYPE, to the state-save-frame on the stack.
-   EP may be trashed, but is not guaranteed to contain a copy of SP
-   (unlike after most SAVE_... macros).  r19 may be trashed.  */
-#define SAVE_EXTRA_STATE_FOR_SCHEDULE(type)                                   \
-        type ## _SCHEDULE_EXTRA_STATE_SAVER
-/* Restore any call-clobbered registers not normally restored by
-   POP_STATE for TYPE, to the state-save-frame on the stack.
-   EP may be trashed, but is not guaranteed to contain a copy of SP
-   (unlike after most RESTORE_... macros).  r19 may be trashed.  */
-#define RESTORE_EXTRA_STATE_FOR_SCHEDULE(type)                                \
-        type ## _SCHEDULE_EXTRA_STATE_RESTORER
-
-
-/* These are extra_state_saver/restorer values for a user trap.  Note
-   that we save the argument registers so that restarted syscalls will
-   function properly (otherwise it wouldn't be necessary), and we must
-   _not_ restore the return-value registers (so that traps can return a
-   value!), but call-clobbered registers are not saved at all, as the
-   caller of the syscall function should have saved them.  */
-
-#define TRAP_RET reti
-/* Traps don't save call-clobbered registers (but do still save arg regs).
-   We preserve PSw to keep long-term state, namely interrupt status (for traps
-   from kernel-mode), and the single-step flag (for user traps).  */
-#define TRAP_STATE_SAVER                                                      \
-        SAVE_ARG_REGS;                                                        \
-        SAVE_PC(EIPC);                                                        \
-        SAVE_PSW(EIPSW)
-/* When traps return, they just leave call-clobbered registers (except for arg
-   regs) with whatever value they have from the kernel.  Traps don't preserve
-   the PSW, but we zero EIPSW to ensure it doesn't contain anything dangerous
-   (in particular, the single-step flag).  */
-#define TRAP_STATE_RESTORER                                                   \
-        RESTORE_ARG_REGS;                                                     \
-        RESTORE_PC(EIPC);                                                     \
-        RESTORE_PSW(EIPSW)
-/* Save registers not normally saved by traps.  We need to save r12, even
-   though it's nominally call-clobbered, because it's used when restarting
-   a system call (the signal-handling path uses SAVE_EXTRA_STATE, and
-   expects r12 to be restored when the trap returns).  */
-#define TRAP_EXTRA_STATE_SAVER                                                \
-        SAVE_RVAL_REGS;                                                       \
-        sst.w   r12, PTO+PT_GPR(12)[ep];                                      \
-        SAVE_CALL_SAVED_REGS;                                                 \
-        SAVE_CT_REGS
-#define TRAP_EXTRA_STATE_RESTORER                                             \
-        RESTORE_RVAL_REGS;                                                    \
-        sld.w   PTO+PT_GPR(12)[ep], r12;                                      \
-        RESTORE_CALL_SAVED_REGS;                                              \
-        RESTORE_CT_REGS
-/* Save registers prior to calling scheduler (just before trap returns).
-   We have to save the return-value registers to preserve the trap's return
-   value.  Note that ..._SCHEDULE_EXTRA_STATE_SAVER, unlike most ..._SAVER
-   macros, is required to setup EP itself if EP is needed (this is because
-   in many cases, the macro is empty).  */
-#define TRAP_SCHEDULE_EXTRA_STATE_SAVER                                       \
-        mov sp, ep;                                                           \
-        SAVE_RVAL_REGS
-/* Note that ..._SCHEDULE_EXTRA_STATE_RESTORER, unlike most ..._RESTORER
-   macros, is required to setup EP itself if EP is needed (this is because
-   in many cases, the macro is empty).  */
-#define TRAP_SCHEDULE_EXTRA_STATE_RESTORER                                    \
-        mov sp, ep;                                                           \
-        RESTORE_RVAL_REGS
-
-/* Register saving/restoring for maskable interrupts.  */
-#define IRQ_RET reti
-#define IRQ_STATE_SAVER                                                       \
-        SAVE_CALL_CLOBBERED_REGS;                                             \
-        SAVE_PC(EIPC);                                                        \
-        SAVE_PSW(EIPSW)
-#define IRQ_STATE_RESTORER                                                    \
-        RESTORE_CALL_CLOBBERED_REGS;                                          \
-        RESTORE_PC(EIPC);                                                     \
-        RESTORE_PSW(EIPSW)
-#define IRQ_EXTRA_STATE_SAVER                                                 \
-        SAVE_CALL_SAVED_REGS;                                                 \
-        SAVE_CT_REGS
-#define IRQ_EXTRA_STATE_RESTORER                                              \
-        RESTORE_CALL_SAVED_REGS;                                              \
-        RESTORE_CT_REGS
-#define IRQ_SCHEDULE_EXTRA_STATE_SAVER       /* nothing */
-#define IRQ_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for non-maskable interrupts.  */
-#define NMI_RET reti
-#define NMI_STATE_SAVER                                                       \
-        SAVE_CALL_CLOBBERED_REGS;                                             \
-        SAVE_PC(FEPC);                                                        \
-        SAVE_PSW(FEPSW);
-#define NMI_STATE_RESTORER                                                    \
-        RESTORE_CALL_CLOBBERED_REGS;                                          \
-        RESTORE_PC(FEPC);                                                     \
-        RESTORE_PSW(FEPSW);
-#define NMI_EXTRA_STATE_SAVER                                                 \
-        SAVE_CALL_SAVED_REGS;                                                 \
-        SAVE_CT_REGS
-#define NMI_EXTRA_STATE_RESTORER                                              \
-        RESTORE_CALL_SAVED_REGS;                                              \
-        RESTORE_CT_REGS
-#define NMI_SCHEDULE_EXTRA_STATE_SAVER       /* nothing */
-#define NMI_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for debug traps.  */
-#define DBTRAP_RET .long 0x014607E0 /* `dbret', but gas doesn't support it. */
-#define DBTRAP_STATE_SAVER                                                    \
-        SAVE_CALL_CLOBBERED_REGS;                                             \
-        SAVE_PC(DBPC);                                                        \
-        SAVE_PSW(DBPSW)
-#define DBTRAP_STATE_RESTORER                                                 \
-        RESTORE_CALL_CLOBBERED_REGS;                                          \
-        RESTORE_PC(DBPC);                                                     \
-        RESTORE_PSW(DBPSW)
-#define DBTRAP_EXTRA_STATE_SAVER                                              \
-        SAVE_CALL_SAVED_REGS;                                                 \
-        SAVE_CT_REGS
-#define DBTRAP_EXTRA_STATE_RESTORER                                           \
-        RESTORE_CALL_SAVED_REGS;                                              \
-        RESTORE_CT_REGS
-#define DBTRAP_SCHEDULE_EXTRA_STATE_SAVER       /* nothing */
-#define DBTRAP_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for a context switch.  We don't need to save
-   too many registers, because context-switching looks like a function call
-   (via the function `switch_thread'), so callers will save any
-   call-clobbered registers themselves.  We do need to save the CT regs, as
-   they're normally not saved during kernel entry (the kernel doesn't use
-   them).  We save PSW so that interrupt-status state will correctly follow
-   each thread (mostly NMI vs. normal-IRQ/trap), though for the most part
-   it doesn't matter since threads are always in almost exactly the same
-   processor state during a context switch.  The stack pointer and return
-   value are handled by switch_thread itself.  */
-#define SWITCH_STATE_SAVER                                                    \
-        SAVE_CALL_SAVED_REGS;                                                 \
-        SAVE_PSW(PSW);                                                        \
-        SAVE_CT_REGS
-#define SWITCH_STATE_RESTORER                                                 \
-        RESTORE_CALL_SAVED_REGS;                                              \
-        RESTORE_PSW(PSW);                                                     \
-        RESTORE_CT_REGS
-
-
-/* Restore register state from the state-save-frame on the stack, switch back
-   to the user stack if necessary, and return from the trap/interrupt.
-   EXTRA_STATE_RESTORER is a sequence of assembly language statements to
-   restore anything not restored by this macro.  Only registers not saved by
-   the C compiler are restored (that is, R3(sp), R4(gp), R31(lp), and
-   anything restored by EXTRA_STATE_RESTORER).  */
-#define RETURN(type)                                                          \
-        ld.b    PTO+PT_KERNEL_MODE[sp], r19;                                  \
-        di;                             /* Disable interrupts */              \
-        cmp     r19, r0;                /* See if returning to kernel mode, */\
-        bne     2f;                     /* ... if so, skip resched &c.  */    \
-                                                                              \
-        /* We're returning to user mode, so check for various conditions that \
-           trigger rescheduling. */                                           \
-        GET_CURRENT_THREAD(r18);                                              \
-        ld.w    TI_FLAGS[r18], r19;                                           \
-        andi    _TIF_NEED_RESCHED, r19, r0;                                   \
-        bnz     3f;                     /* Call the scheduler.  */            \
-5:      andi    _TIF_SIGPENDING, r19, r18;                                    \
-        ld.w    TASK_PTRACE[CURRENT_TASK], r19; /* ptrace flags */            \
-        or      r18, r19;               /* see if either is non-zero */       \
-        bnz     4f;                     /* if so, handle them */              \
-                                                                              \
-/* Return to user state.  */                                                  \
-1:      st.b    r0, KM;                 /* Now officially in user state. */   \
-                                                                              \
-/* Final return.  The stack-pointer fiddling is not needed when returning     \
-   to kernel-mode, but they don't hurt, and this way we can share the         \
-   (sometimes rather lengthy) POP_STATE macro.  */                            \
-2:      POP_STATE(type);                                                      \
-        st.w    sp, KSP;                /* Save the kernel stack pointer. */  \
-        ld.w    PT_GPR(GPR_SP)-PT_SIZE[sp], sp; /* Restore stack pointer. */  \
-        type ## _RET;                   /* Return from the trap/interrupt. */ \
-                                                                              \
-/* Call the scheduler before returning from a syscall/trap. */                \
-3:      SAVE_EXTRA_STATE_FOR_SCHEDULE(type); /* Prepare to call scheduler. */ \
-        jarl    call_scheduler, lp;     /* Call scheduler */                  \
-        di;                             /* The scheduler enables interrupts */\
-        RESTORE_EXTRA_STATE_FOR_SCHEDULE(type);                               \
-        GET_CURRENT_THREAD(r18);                                              \
-        ld.w    TI_FLAGS[r18], r19;                                           \
-        br      5b;                     /* Continue with return path. */      \
-                                                                              \
-/* Handle a signal or ptraced process return.                                 \
-   r18 should be non-zero if there are pending signals.  */                   \
-4:      /* Not all registers are saved by the normal trap/interrupt entry     \
-           points (for instance, call-saved registers (because the normal     \
-           C-compiler calling sequence in the kernel makes sure they're       \
-           preserved), and call-clobbered registers in the case of            \
-           traps), but signal handlers may want to examine or change the      \
-           complete register state.  Here we save anything not saved by       \
-           the normal entry sequence, so that it may be safely restored       \
-           (in a possibly modified form) after do_signal returns.  */         \
-        SAVE_EXTRA_STATE(type);         /* Save state not saved by entry. */  \
-        jarl    handle_signal_or_ptrace_return, lp;                           \
-        RESTORE_EXTRA_STATE(type);      /* Restore extra regs.  */            \
-        br      1b
-
-
-/* Jump to the appropriate function for the system call number in r12
-   (r12 is not preserved), or return an error if r12 is not valid.  The
-   LP register should point to the location where the called function
-   should return.  [note that MAKE_SYS_CALL uses label 1]  */
-#define MAKE_SYS_CALL                                                         \
-        /* Figure out which function to use for this system call.  */         \
-        shl     2, r12;                                                       \
-        /* See if the system call number is valid.  */                        \
-        addi    lo(CSYM(sys_call_table) - sys_call_table_end), r12, r0;       \
-        bnh     1f;                                                           \
-        mov     hilo(CSYM(sys_call_table)), r19;                              \
-        add     r19, r12;                                                     \
-        ld.w    0[r12], r12;                                                  \
-        /* Make the system call.  */                                          \
-        jmp     [r12];                                                        \
-        /* The syscall number is invalid, return an error.  */                \
-1:      addi    -ENOSYS, r0, r10;                                             \
-        jmp     [lp]
-
-
-        .text
-
-/*
- * User trap.
- *
- * Trap 0 system calls are also handled here.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- *
- * Syscall protocol:
- *   Syscall number in r12, args in r6-r9
- *   Return value in r10
- */
-G_ENTRY(trap):
-        SAVE_STATE (TRAP, r12, ENTRY_SP) // Save registers.
-        stsr    SR_ECR, r19             // Find out which trap it was.
-        ei                              // Enable interrupts.
-        mov     hilo(ret_from_trap), lp // where the trap should return
-
-        // The following two shifts (1) clear out extraneous NMI data in the
-        // upper 16-bits, (2) convert the 0x40 - 0x5f range of trap ECR
-        // numbers into the (0-31) << 2 range we want, (3) set the flags.
-        shl     27, r19                 // chop off all high bits
-        shr     25, r19                 // scale back down and then << 2
-        bnz     2f                      // See if not trap 0.
-
-        // Trap 0 is a `short' system call, skip general trap table.
-        MAKE_SYS_CALL                   // Jump to the syscall function.
-
-2:      // For other traps, use a table lookup.
-        mov     hilo(CSYM(trap_table)), r18
-        add     r19, r18
-        ld.w    0[r18], r18
-        jmp     [r18]                   // Jump to the trap handler.
-END(trap)
-
-/* This is just like ret_from_trap, but first restores extra registers
-   saved by some wrappers.  */
-L_ENTRY(restore_extra_regs_and_ret_from_trap):
-        RESTORE_EXTRA_STATE(TRAP)
-        // fall through
-END(restore_extra_regs_and_ret_from_trap)
-
-/* Entry point used to return from a syscall/trap.  */
-L_ENTRY(ret_from_trap):
-        RETURN(TRAP)
-END(ret_from_trap)
-
-
-/* This the initial entry point for a new child thread, with an appropriate
-   stack in place that makes it look that the child is in the middle of an
-   syscall.  This function is actually `returned to' from switch_thread
-   (copy_thread makes ret_from_fork the return address in each new thread's
-   saved context).  */
-C_ENTRY(ret_from_fork):
-        mov     r10, r6                 // switch_thread returns the prev task.
-        jarl    CSYM(schedule_tail), lp // ...which is schedule_tail's arg
-        mov     r0, r10                 // Child's fork call should return 0.
-        br      ret_from_trap           // Do normal trap return.
-C_END(ret_from_fork)
-
-
-/*
- * Trap 1: `long' system calls
- * `Long' syscall protocol:
- *   Syscall number in r12, args in r6-r9, r13-r14
- *   Return value in r10
- */
-L_ENTRY(syscall_long):
-        // Push extra arguments on the stack.  Note that by default, the trap
-        // handler reserves enough stack space for 6 arguments, so we don't
-        // have to make any additional room.
-        st.w    r13, 16[sp]             // arg 5
-        st.w    r14, 20[sp]             // arg 6
-
-        // Make sure r13 and r14 are preserved, in case we have to restart a
-        // system call because of a signal (ep has already been set by caller).
-        st.w    r13, PTO+PT_GPR(13)[sp]
-        st.w    r14, PTO+PT_GPR(13)[sp]
-        mov     hilo(ret_from_long_syscall), lp
-
-        MAKE_SYS_CALL                   // Jump to the syscall function.
-END(syscall_long)
-
-/* Entry point used to return from a long syscall.  Only needed to restore
-   r13/r14 if the general trap mechanism doesnt' do so.  */
-L_ENTRY(ret_from_long_syscall):
-        ld.w    PTO+PT_GPR(13)[sp], r13 // Restore the extra registers
-        ld.w    PTO+PT_GPR(13)[sp], r14
-        br      ret_from_trap           // The rest is the same as other traps
-END(ret_from_long_syscall)
-
-
-/* These syscalls need access to the struct pt_regs on the stack, so we
-   implement them in assembly (they're basically all wrappers anyway).  */
-
-L_ENTRY(sys_fork_wrapper):
-#ifdef CONFIG_MMU
-        addi    SIGCHLD, r0, r6            // Arg 0: flags
-        ld.w    PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
-        movea   PTO, sp, r8                // Arg 2: parent context
-        mov     r0, r9                     // Arg 3/4/5: 0
-        st.w    r0, 16[sp]
-        st.w    r0, 20[sp]
-        mov     hilo(CSYM(do_fork)), r18   // Where the real work gets done
-        br      save_extra_state_tramp     // Save state and go there
-#else
-        // fork almost works, enough to trick you into looking elsewhere :-(
-        addi    -EINVAL, r0, r10
-        jmp     [lp]
-#endif
-END(sys_fork_wrapper)
-
-L_ENTRY(sys_vfork_wrapper):
-        addi    CLONE_VFORK | CLONE_VM | SIGCHLD, r0, r6 // Arg 0: flags
-        ld.w    PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
-        movea   PTO, sp, r8                // Arg 2: parent context
-        mov     r0, r9                     // Arg 3/4/5: 0
-        st.w    r0, 16[sp]
-        st.w    r0, 20[sp]
-        mov     hilo(CSYM(do_fork)), r18   // Where the real work gets done
-        br      save_extra_state_tramp     // Save state and go there
-END(sys_vfork_wrapper)
-
-L_ENTRY(sys_clone_wrapper):
-        ld.w    PTO+PT_GPR(GPR_SP)[sp], r19// parent's stack pointer
-        cmp     r7, r0                     // See if child SP arg (arg 1) is 0.
-        cmov    z, r19, r7, r7             // ... and use the parent's if so.
-        movea   PTO, sp, r8                // Arg 2: parent context
-        mov     r0, r9                     // Arg 3/4/5: 0
-        st.w    r0, 16[sp]
-        st.w    r0, 20[sp]
-        mov     hilo(CSYM(do_fork)), r18   // Where the real work gets done
-        br      save_extra_state_tramp     // Save state and go there
-END(sys_clone_wrapper)
-
-
-L_ENTRY(sys_execve_wrapper):
-        movea   PTO, sp, r9             // add user context as 4th arg
-        jr      CSYM(sys_execve)        // Do real work (tail-call).
-END(sys_execve_wrapper)
-
-
-L_ENTRY(sys_sigsuspend_wrapper):
-        movea   PTO, sp, r7             // add user context as 2nd arg
-        mov     hilo(CSYM(sys_sigsuspend)), r18 // syscall function
-        jarl    save_extra_state_tramp, lp      // Save state and do it
-        br      restore_extra_regs_and_ret_from_trap
-END(sys_sigsuspend_wrapper)
-L_ENTRY(sys_rt_sigsuspend_wrapper):
-        movea   PTO, sp, r8             // add user context as 3rd arg
-        mov     hilo(CSYM(sys_rt_sigsuspend)), r18 // syscall function
-        jarl    save_extra_state_tramp, lp         // Save state and do it
-        br      restore_extra_regs_and_ret_from_trap
-END(sys_rt_sigsuspend_wrapper)
-
-L_ENTRY(sys_sigreturn_wrapper):
-        movea   PTO, sp, r6             // add user context as 1st arg
-        mov     hilo(CSYM(sys_sigreturn)), r18  // syscall function
-        jarl    save_extra_state_tramp, lp      // Save state and do it
-        br      restore_extra_regs_and_ret_from_trap
-END(sys_sigreturn_wrapper)
-L_ENTRY(sys_rt_sigreturn_wrapper):
-        movea   PTO, sp, r6             // add user context as 1st arg
-        mov     hilo(CSYM(sys_rt_sigreturn)), r18// syscall function
-        jarl    save_extra_state_tramp, lp       // Save state and do it
-        br      restore_extra_regs_and_ret_from_trap
-END(sys_rt_sigreturn_wrapper)
-
-
-/* Save any state not saved by SAVE_STATE(TRAP), and jump to r18.
-   It's main purpose is to share the rather lengthy code sequence that
-   SAVE_STATE expands into among the above wrapper functions.  */
-L_ENTRY(save_extra_state_tramp):
-        SAVE_EXTRA_STATE(TRAP)          // Save state not saved by entry.
-        jmp     [r18]                   // Do the work the caller wants
-END(save_extra_state_tramp)
-
-
-/*
- * Hardware maskable interrupts.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(irq):
-        SAVE_STATE (IRQ, r0, ENTRY_SP)  // Save registers.
-
-        stsr    SR_ECR, r6              // Find out which interrupt it was.
-        movea   PTO, sp, r7             // User regs are arg2
-
-        // All v850 implementations I know about encode their interrupts as
-        // multiples of 0x10, starting at 0x80 (after NMIs and software
-        // interrupts).  Convert this number into a simple IRQ index for the
-        // rest of the kernel.  We also clear the upper 16 bits, which hold
-        // NMI info, and don't appear to be cleared when a NMI returns.
-        shl     16, r6                  // clear upper 16 bits
-        shr     20, r6                  // shift back, and remove lower nibble
-        add     -8, r6                  // remove bias for irqs
-
-        // Call the high-level interrupt handling code.
-        jarl    CSYM(handle_irq), lp
-
-        RETURN(IRQ)
-END(irq)
-
-
-/*
- * Debug trap / illegal-instruction exception
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(dbtrap):
-        SAVE_STATE (DBTRAP, r0, ENTRY_SP)// Save registers.
-
-        /* First see if we came from kernel mode; if so, the dbtrap
-           instruction has a special meaning, to set the DIR (`debug
-           information register') register.  This is because the DIR register
-           can _only_ be manipulated/read while in `debug mode,' and debug
-           mode is only active while we're inside the dbtrap handler.  The
-           exact functionality is:  { DIR = (DIR | r6) & ~r7; return DIR; }. */
-        ld.b    PTO+PT_KERNEL_MODE[sp], r19
-        cmp     r19, r0
-        bz      1f
-
-        stsr    SR_DIR, r10
-        or      r6, r10
-        not     r7, r7
-        and     r7, r10
-        ldsr    r10, SR_DIR
-        stsr    SR_DIR, r10             // Confirm the value we set
-        st.w    r10, PTO+PT_GPR(10)[sp] // return it
-        br      3f
-
-1:      ei                              // Enable interrupts.
-
-        /* The default signal type we raise.  */
-        mov     SIGTRAP, r6
-
-        /* See if it's a single-step trap.  */
-        stsr    SR_DBPSW, r19
-        andi    0x0800, r19, r19
-        bnz     2f
-
-        /* Look to see if the preceding instruction was is a dbtrap or not,
-           to decide which signal we should use.  */
-        stsr    SR_DBPC, r19            // PC following trapping insn
-        ld.hu   -2[r19], r19
-        ori     0xf840, r0, r20         // DBTRAP insn
-        cmp     r19, r20                // Was this trap caused by DBTRAP?
-        cmov    ne, SIGILL, r6, r6      // Choose signal appropriately
-
-        /* Raise the desired signal.  */
-2:      mov     CURRENT_TASK, r7        // Arg 1: task
-        jarl    CSYM(send_sig), lp      // tail call
-
-3:      RETURN(DBTRAP)
-END(dbtrap)
-
-
-/*
- * Hardware non-maskable interrupts.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(nmi):
-        SAVE_STATE (NMI, r0, NMI_ENTRY_SP); /* Save registers.  */
-
-        stsr    SR_ECR, r6;             /* Find out which nmi it was.  */
-        shr     20, r6;                 /* Extract NMI code in bits 20-24. */
-        movea   PTO, sp, r7;            /* User regs are arg2.  */
-
-        /* Non-maskable interrupts always lie right after maskable interrupts.
-           Call the generic IRQ handler, with two arguments, the IRQ number,
-           and a pointer to the user registers, to handle the specifics.
-           (we subtract one because the first NMI has code 1).  */
-        addi    FIRST_NMI - 1, r6, r6
-        jarl    CSYM(handle_irq), lp
-
-        RETURN(NMI)
-END(nmi)
-
-
-/*
- * Trap with no handler
- */
-L_ENTRY(bad_trap_wrapper):
-        mov     r19, r6                 // Arg 0: trap number
-        movea   PTO, sp, r7             // Arg 1: user regs
-        jr      CSYM(bad_trap)          // tail call handler
-END(bad_trap_wrapper)
-
-
-/*
- * Invoke the scheduler, called from the trap/irq kernel exit path.
- *
- * This basically just calls `schedule', but also arranges for extra
- * registers to be saved for ptrace'd processes, so ptrace can modify them.
- */
-L_ENTRY(call_scheduler):
-        ld.w    TASK_PTRACE[CURRENT_TASK], r19  // See if task is ptrace'd
-        cmp     r19, r0
-        bnz     1f                      // ... yes, do special stuff
-        jr      CSYM(schedule)          // ... no, just tail-call scheduler
-
-        // Save extra regs for ptrace'd task.  We want to save anything
-        // that would otherwise only be `implicitly' saved by the normal
-        // compiler calling-convention.
-1:      mov     sp, ep                  // Setup EP for SAVE_CALL_SAVED_REGS
-        SAVE_CALL_SAVED_REGS            // Save call-saved registers to stack
-        mov     lp, r20                 // Save LP in a callee-saved register
-
-        jarl    CSYM(schedule), lp      // Call scheduler
-
-        mov     r20, lp
-        mov     sp, ep                  // We can't rely on EP after return
-        RESTORE_CALL_SAVED_REGS         // Restore (possibly modified) regs
-        jmp     [lp]                    // Return to the return path
-END(call_scheduler)
-
-
-/*
- * This is an out-of-line handler for two special cases during the kernel
- * trap/irq exit sequence:
- *
- *  (1) If r18 is non-zero then a signal needs to be handled, which is
- *      done, and then the caller returned to.
- *
- *  (2) If r18 is non-zero then we're returning to a ptraced process, which
- *      has several special cases -- single-stepping and trap tracing, both
- *      of which require using the `dbret' instruction to exit the kernel
- *      instead of the normal `reti' (this is because the CPU not correctly
- *      single-step after a reti).  In this case, of course, this handler
- *      never returns to the caller.
- *
- * In either case, all registers should have been saved to the current
- * state-save-frame on the stack, except for callee-saved registers.
- *
- * [These two different cases are combined merely to avoid bloating the
- * macro-inlined code, not because they really make much sense together!]
- */
-L_ENTRY(handle_signal_or_ptrace_return):
-        cmp     r18, r0                 // See if handling a signal
-        bz      1f                      // ... nope, go do ptrace return
-
-        // Handle a signal
-        mov     lp, r20                 // Save link-pointer
-        mov     r10, r21                // Save return-values (for trap)
-        mov     r11, r22
-
-        movea   PTO, sp, r6             // Arg 1: struct pt_regs *regs
-        mov     r0, r7                  // Arg 2: sigset_t *oldset
-        jarl    CSYM(do_signal), lp     // Handle the signal
-        di                              // sig handling enables interrupts
-
-        mov     r20, lp                 // Restore link-pointer
-        mov     r21, r10                // Restore return-values (for trap)
-        mov     r22, r11
-        ld.w    TASK_PTRACE[CURRENT_TASK], r19  // check ptrace flags too
-        cmp     r19, r0
-        bnz     1f                      // ... some set, so look more
-2:      jmp     [lp]                    // ... none set, so return normally
-
-        // ptrace return
-1:      ld.w    PTO+PT_PSW[sp], r19     // Look at user-processes's flags
-        andi    0x0800, r19, r19        // See if single-step flag is set
-        bz      2b                      // ... nope, return normally
-
-        // Return as if from a dbtrap insn
-        st.b    r0, KM                  // Now officially in user state.
-        POP_STATE(DBTRAP)               // Restore regs
-        st.w    sp, KSP                 // Save the kernel stack pointer.
-        ld.w    PT_GPR(GPR_SP)-PT_SIZE[sp], sp // Restore user stack pointer.
-        DBTRAP_RET                      // Return from the trap/interrupt.
-END(handle_signal_or_ptrace_return)
-
-
-/*
- * This is where we switch between two threads.  The arguments are:
- *   r6 -- pointer to the struct thread for the `current' process
- *   r7 -- pointer to the struct thread for the `new' process.
- * when this function returns, it will return to the new thread.
- */
-C_ENTRY(switch_thread):
-        // Return the previous task (r10 is not clobbered by restore below)
-        mov     CURRENT_TASK, r10
-        // First, push the current processor state on the stack
-        PUSH_STATE(SWITCH)
-        // Now save the location of the kernel stack pointer for this thread;
-        // since we've pushed all other state on the stack, this is enough to
-        // restore it all later.
-        st.w    sp, THREAD_KSP[r6]
-        // Now restore the stack pointer from the new process
-        ld.w    THREAD_KSP[r7], sp
-        // ... and restore all state from that
-        POP_STATE(SWITCH)
-        // Update the current task pointer
-        GET_CURRENT_TASK(CURRENT_TASK)
-        // Now return into the new thread
-        jmp     [lp]
-C_END(switch_thread)
-
-
-        .data
-
-        .align 4
-C_DATA(trap_table):
-        .long bad_trap_wrapper          // trap 0, doesn't use trap table.
-        .long syscall_long              // trap 1, `long' syscall.
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-        .long bad_trap_wrapper
-C_END(trap_table)
-
-
-        .section .rodata
-
-        .align 4
-C_DATA(sys_call_table):
-        .long CSYM(sys_restart_syscall) // 0
-        .long CSYM(sys_exit)
-        .long sys_fork_wrapper
-        .long CSYM(sys_read)
-        .long CSYM(sys_write)
-        .long CSYM(sys_open)            // 5
-        .long CSYM(sys_close)
-        .long CSYM(sys_waitpid)
-        .long CSYM(sys_creat)
-        .long CSYM(sys_link)
-        .long CSYM(sys_unlink)          // 10
-        .long sys_execve_wrapper
-        .long CSYM(sys_chdir)
-        .long CSYM(sys_time)
-        .long CSYM(sys_mknod)
-        .long CSYM(sys_chmod)           // 15
-        .long CSYM(sys_chown)
-        .long CSYM(sys_ni_syscall)      // was: break
-        .long CSYM(sys_ni_syscall)      // was: oldstat (aka stat)
-        .long CSYM(sys_lseek)
-        .long CSYM(sys_getpid)          // 20
-        .long CSYM(sys_mount)
-        .long CSYM(sys_oldumount)
-        .long CSYM(sys_setuid)
-        .long CSYM(sys_getuid)
-        .long CSYM(sys_stime)           // 25
-        .long CSYM(sys_ptrace)
-        .long CSYM(sys_alarm)
-        .long CSYM(sys_ni_syscall)      // was: oldfstat (aka fstat)
-        .long CSYM(sys_pause)
-        .long CSYM(sys_utime)           // 30
-        .long CSYM(sys_ni_syscall)      // was: stty
-        .long CSYM(sys_ni_syscall)      // was: gtty
-        .long CSYM(sys_access)
-        .long CSYM(sys_nice)
-        .long CSYM(sys_ni_syscall)      // 35, was: ftime
-        .long CSYM(sys_sync)
-        .long CSYM(sys_kill)
-        .long CSYM(sys_rename)
-        .long CSYM(sys_mkdir)
-        .long CSYM(sys_rmdir)           // 40
-        .long CSYM(sys_dup)
-        .long CSYM(sys_pipe)
-        .long CSYM(sys_times)
-        .long CSYM(sys_ni_syscall)      // was: prof
-        .long CSYM(sys_brk)             // 45
-        .long CSYM(sys_setgid)
-        .long CSYM(sys_getgid)
-        .long CSYM(sys_signal)
-        .long CSYM(sys_geteuid)
-        .long CSYM(sys_getegid)         // 50
-        .long CSYM(sys_acct)
-        .long CSYM(sys_umount)          // recycled never used phys()
-        .long CSYM(sys_ni_syscall)      // was: lock
-        .long CSYM(sys_ioctl)
-        .long CSYM(sys_fcntl)           // 55
-        .long CSYM(sys_ni_syscall)      // was: mpx
-        .long CSYM(sys_setpgid)
-        .long CSYM(sys_ni_syscall)      // was: ulimit
-        .long CSYM(sys_ni_syscall)
-        .long CSYM(sys_umask)           // 60
-        .long CSYM(sys_chroot)
-        .long CSYM(sys_ustat)
-        .long CSYM(sys_dup2)
-        .long CSYM(sys_getppid)
-        .long CSYM(sys_getpgrp)         // 65
-        .long CSYM(sys_setsid)
-        .long CSYM(sys_sigaction)
-        .long CSYM(sys_sgetmask)
-        .long CSYM(sys_ssetmask)
-        .long CSYM(sys_setreuid)        // 70
-        .long CSYM(sys_setregid)
-        .long sys_sigsuspend_wrapper
-        .long CSYM(sys_sigpending)
-        .long CSYM(sys_sethostname)
-        .long CSYM(sys_setrlimit)       // 75
-        .long CSYM(sys_getrlimit)
-        .long CSYM(sys_getrusage)
-        .long CSYM(sys_gettimeofday)
-        .long CSYM(sys_settimeofday)
-        .long CSYM(sys_getgroups)       // 80
-        .long CSYM(sys_setgroups)
-        .long CSYM(sys_select)
-        .long CSYM(sys_symlink)
-        .long CSYM(sys_ni_syscall)      // was: oldlstat (aka lstat)
-        .long CSYM(sys_readlink)        // 85
-        .long CSYM(sys_uselib)
-        .long CSYM(sys_swapon)
-        .long CSYM(sys_reboot)
-        .long CSYM(old_readdir)
-        .long CSYM(sys_mmap)            // 90
-        .long CSYM(sys_munmap)
-        .long CSYM(sys_truncate)
-        .long CSYM(sys_ftruncate)
-        .long CSYM(sys_fchmod)
-        .long CSYM(sys_fchown)          // 95
-        .long CSYM(sys_getpriority)
-        .long CSYM(sys_setpriority)
-        .long CSYM(sys_ni_syscall)      // was: profil
-        .long CSYM(sys_statfs)
-        .long CSYM(sys_fstatfs)         // 100
-        .long CSYM(sys_ni_syscall)      // i386: ioperm
-        .long CSYM(sys_socketcall)
-        .long CSYM(sys_syslog)
-        .long CSYM(sys_setitimer)
-        .long CSYM(sys_getitimer)       // 105
-        .long CSYM(sys_newstat)
-        .long CSYM(sys_newlstat)
-        .long CSYM(sys_newfstat)
-        .long CSYM(sys_ni_syscall)      // was: olduname (aka uname)
-        .long CSYM(sys_ni_syscall)      // 110, i386: iopl
-        .long CSYM(sys_vhangup)
-        .long CSYM(sys_ni_syscall)      // was: idle
-        .long CSYM(sys_ni_syscall)      // i386: vm86old
-        .long CSYM(sys_wait4)
-        .long CSYM(sys_swapoff)         // 115
-        .long CSYM(sys_sysinfo)
-        .long CSYM(sys_ipc)
-        .long CSYM(sys_fsync)
-        .long sys_sigreturn_wrapper
-        .long sys_clone_wrapper         // 120
-        .long CSYM(sys_setdomainname)
-        .long CSYM(sys_newuname)
-        .long CSYM(sys_ni_syscall)      // i386: modify_ldt, m68k: cacheflush
-        .long CSYM(sys_adjtimex)
-        .long CSYM(sys_ni_syscall)      // 125 - sys_mprotect
-        .long CSYM(sys_sigprocmask)
-        .long CSYM(sys_ni_syscall)      // sys_create_module
-        .long CSYM(sys_init_module)
-        .long CSYM(sys_delete_module)
-        .long CSYM(sys_ni_syscall)      // 130 - sys_get_kernel_syms
-        .long CSYM(sys_quotactl)
-        .long CSYM(sys_getpgid)
-        .long CSYM(sys_fchdir)
-        .long CSYM(sys_bdflush)
-        .long CSYM(sys_sysfs)           // 135
-        .long CSYM(sys_personality)
-        .long CSYM(sys_ni_syscall)      // for afs_syscall
-        .long CSYM(sys_setfsuid)
-        .long CSYM(sys_setfsgid)
-        .long CSYM(sys_llseek)          // 140
-        .long CSYM(sys_getdents)
-        .long CSYM(sys_select)          // for backward compat; remove someday
-        .long CSYM(sys_flock)
-        .long CSYM(sys_ni_syscall)      // sys_msync
-        .long CSYM(sys_readv)           // 145
-        .long CSYM(sys_writev)
-        .long CSYM(sys_getsid)
-        .long CSYM(sys_fdatasync)
-        .long CSYM(sys_sysctl)
-        .long CSYM(sys_ni_syscall)      // 150 - sys_mlock
-        .long CSYM(sys_ni_syscall)      // sys_munlock
-        .long CSYM(sys_ni_syscall)      // sys_mlockall
-        .long CSYM(sys_ni_syscall)      // sys_munlockall
-        .long CSYM(sys_sched_setparam)
-        .long CSYM(sys_sched_getparam)  // 155
-        .long CSYM(sys_sched_setscheduler)
-        .long CSYM(sys_sched_getscheduler)
-        .long CSYM(sys_sched_yield)
-        .long CSYM(sys_sched_get_priority_max)
-        .long CSYM(sys_sched_get_priority_min)  // 160
-        .long CSYM(sys_sched_rr_get_interval)
-        .long CSYM(sys_nanosleep)
-        .long CSYM(sys_ni_syscall)      // sys_mremap
-        .long CSYM(sys_setresuid)
-        .long CSYM(sys_getresuid)       // 165
-        .long CSYM(sys_ni_syscall)      // for vm86
-        .long CSYM(sys_ni_syscall)      // sys_query_module
-        .long CSYM(sys_poll)
-        .long CSYM(sys_nfsservctl)
-        .long CSYM(sys_setresgid)       // 170
-        .long CSYM(sys_getresgid)
-        .long CSYM(sys_prctl)
-        .long sys_rt_sigreturn_wrapper
-        .long CSYM(sys_rt_sigaction)
-        .long CSYM(sys_rt_sigprocmask)  // 175
-        .long CSYM(sys_rt_sigpending)
-        .long CSYM(sys_rt_sigtimedwait)
-        .long CSYM(sys_rt_sigqueueinfo)
-        .long sys_rt_sigsuspend_wrapper
-        .long CSYM(sys_pread64)         // 180
-        .long CSYM(sys_pwrite64)
-        .long CSYM(sys_lchown)
-        .long CSYM(sys_getcwd)
-        .long CSYM(sys_capget)
-        .long CSYM(sys_capset)          // 185
-        .long CSYM(sys_sigaltstack)
-        .long CSYM(sys_sendfile)
-        .long CSYM(sys_ni_syscall)      // streams1
-        .long CSYM(sys_ni_syscall)      // streams2
-        .long sys_vfork_wrapper         // 190
-        .long CSYM(sys_ni_syscall)
-        .long CSYM(sys_mmap2)
-        .long CSYM(sys_truncate64)
-        .long CSYM(sys_ftruncate64)
-        .long CSYM(sys_stat64)          // 195
-        .long CSYM(sys_lstat64)
-        .long CSYM(sys_fstat64)
-        .long CSYM(sys_fcntl64)
-        .long CSYM(sys_getdents64)
-        .long CSYM(sys_pivot_root)      // 200
-        .long CSYM(sys_gettid)
-        .long CSYM(sys_tkill)
-sys_call_table_end:
-C_END(sys_call_table)
diff --git a/arch/v850/kernel/fpga85e2c.c b/arch/v850/kernel/fpga85e2c.c
deleted file mode 100644
index ab9cf16a85c8..000000000000
--- a/arch/v850/kernel/fpga85e2c.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * arch/v850/kernel/fpga85e2c.h -- Machine-dependent defs for
- *      FPGA implementation of V850E2/NA85E2C
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-extern void memcons_setup (void);
-
-
-#define REG_DUMP_ADDR           0x220000
-
-
-extern struct irqaction reg_snap_action; /* fwd decl */
-
-
-void __init mach_early_init (void)
-{
-        int i;
-        const u32 *src;
-        register u32 *dst asm ("ep");
-        extern u32 _intv_end, _intv_load_start;
-
-        /* Set bus sizes: CS0 32-bit, CS1 16-bit, CS7 8-bit,
-           everything else 32-bit.  */
-        V850E2_BSC = 0x2AA6;
-        for (i = 2; i <= 6; i++)
-                CSDEV(i) = 0;   /* 32 bit */
-
-        /* Ensure that the simulator halts on a panic, instead of going
-           into an infinite loop inside the panic function.  */
-        panic_timeout = -1;
-
-        /* Move the interrupt vectors into their real location.  Note that
-           any relocations there are relative to the real location, so we
-           don't have to fix anything up.  We use a loop instead of calling
-           memcpy to keep this a leaf function (to avoid a function
-           prologue being generated).  */
-        dst = 0x10;             /* &_intv_start + 0x10.  */
-        src = &_intv_load_start;
-        do {
-                u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-                u32 t4 = src[4], t5 = src[5], t6 = src[6], t7 = src[7];
-                dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-                dst[4] = t4; dst[5] = t5; dst[6] = t6; dst[7] = t7;
-                dst += 8;
-                src += 8;
-        } while (dst < &_intv_end);
-}
-
-void __init mach_setup (char **cmdline)
-{
-        memcons_setup ();
-
-        /* Setup up NMI0 to copy the registers to a known memory location.
-           The FGPA board has a button that produces NMI0 when pressed, so
-           this allows us to push the button, and then look at memory to see
-           what's in the registers (there's no other way to easily do so).
-           We have to use `setup_irq' instead of `request_irq' because it's
-           still too early to do memory allocation.  */
-        setup_irq (IRQ_NMI (0), &reg_snap_action);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-        *ram_start = ERAM_ADDR;
-        *ram_len = ERAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-        /* Setup up the timer interrupt.  The FPGA peripheral control
-           registers _only_ work with single-bit writes (set1/clr1)!  */
-        __clear_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-        __clear_bit (RPU_GTMC_CLK_BIT, &RPU_GTMC);
-        __set_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-
-        /* We use the first RPU interrupt, which occurs every 8.192ms.  */
-        setup_irq (IRQ_RPU (0), timer_action);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
-        tv->tv_sec = 0;
-        tv->tv_nsec = 0;
-}
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
-        for (;;) {
-                DWC(0) = 0x7777;
-                DWC(1) = 0x7777;
-                ASC = 0xffff;
-                FLGREG(0) = 1;  /* Halt immediately.  */
-                asm ("di; halt; nop; nop; nop; nop; nop");
-        }
-}
-
-void machine_restart (char *__unused)
-{
-        machine_halt ();
-}
-
-void machine_power_off (void)
-{
-        machine_halt ();
-}
-
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
-        { "IRQ", 0,             NUM_MACH_IRQS,  1, 7 },
-        { "RPU", IRQ_RPU(0),    IRQ_RPU_NUM,    1, 6 },
-        { 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize interrupts.  */
-void __init mach_init_irqs (void)
-{
-        v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-/* An interrupt handler that copies the registers to a known memory location,
-   for debugging purposes.  */
-
-static void make_reg_snap (int irq, void *dummy, struct pt_regs *regs)
-{
-        (*(unsigned *)REG_DUMP_ADDR)++;
-        (*(struct pt_regs *)(REG_DUMP_ADDR + sizeof (unsigned))) = *regs;
-}
-
-static int reg_snap_dev_id;
-static struct irqaction reg_snap_action = {
-        .handler = make_reg_snap,
-        .mask = CPU_MASK_NONE,
-        .name = "reg_snap",
-        .dev_id = &reg_snap_dev_id,
-};
diff --git a/arch/v850/kernel/fpga85e2c.ld b/arch/v850/kernel/fpga85e2c.ld
deleted file mode 100644
index b5d4578ae411..000000000000
--- a/arch/v850/kernel/fpga85e2c.ld
+++ /dev/null
@@ -1,62 +0,0 @@
-/* Linker script for the FPGA implementation of the V850E2 NA85E2C cpu core
-   (CONFIG_V850E2_FPGA85E2C).  */
-
-MEMORY {
-        /* Reset vector.  */
-        RESET    : ORIGIN = 0, LENGTH = 0x10
-        /* Interrupt vectors.  */
-        INTV      : ORIGIN = 0x10, LENGTH = 0x470
-        /* The `window' in RAM were we're allowed to load stuff.  */
-        RAM_LOW   : ORIGIN = 0x480, LENGTH = 0x0005FB80
-        /* Some more ram above the window were we can put bss &c.  */
-        RAM_HIGH  : ORIGIN = 0x00060000, LENGTH = 0x000A0000
-        /* This is the area visible from the outside world (we can use
-           this only for uninitialized data).  */
-        VISIBLE   : ORIGIN = 0x00200000, LENGTH = 0x00060000
-}
-
-SECTIONS {
-        .reset : {
-                __kram_start = . ;
-                __intv_start = . ;
-                        *(.intv.reset)  /* Reset vector */
-        } > RESET
-
-        .ram_low : {
-                __r0_ram = . ;          /* Must be near address 0.  */
-                . = . + 32 ;
-
-                TEXT_CONTENTS
-                DATA_CONTENTS
-                ROOT_FS_CONTENTS
-                RAMK_INIT_CONTENTS_NO_END
-                INITRAMFS_CONTENTS
-        } > RAM_LOW
-
-        /* Where the interrupt vectors are initially loaded.  */
-        __intv_load_start = . ;
-
-        .intv : {
-                        *(.intv.common) /* Vectors common to all v850e proc. */
-                        *(.intv.mach)   /* Machine-specific int. vectors.  */
-                __intv_end = . ;
-        } > INTV  AT> RAM_LOW
-
-        .ram_high : {
-                /* This is here so that when we free init memory the
-                   load-time copy of the interrupt vectors and any empty
-                   space at the end of the `RAM_LOW' area is freed too.  */
-                . = ALIGN (4096);
-                __init_end = . ;
-
-                BSS_CONTENTS
-                __kram_end = . ;
-                BOOTMAP_CONTENTS
-        } > RAM_HIGH
-
-        .visible : {
-                _memcons_output = . ;
-                . = . + 0x8000 ;
-                _memcons_output_end = . ;
-        } > VISIBLE
-}
diff --git a/arch/v850/kernel/gbus_int.c b/arch/v850/kernel/gbus_int.c
deleted file mode 100644
index b2bcc251f65b..000000000000
--- a/arch/v850/kernel/gbus_int.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * arch/v850/kernel/gbus_int.c -- Midas labs GBUS interrupt support
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-
-
-/* The number of shared GINT interrupts. */
-#define NUM_GINTS       4
-
-/* For each GINT interrupt, how many GBUS interrupts are using it.  */
-static unsigned gint_num_active_irqs[NUM_GINTS] = { 0 };
-
-/* A table of GINTn interrupts we actually use.
-   Note that we don't use GINT0 because all the boards we support treat it
-   specially.  */
-struct used_gint {
-        unsigned gint;
-        unsigned priority;
-} used_gint[] = {
-        { 1, GBUS_INT_PRIORITY_HIGH },
-        { 3, GBUS_INT_PRIORITY_LOW }
-};
-#define NUM_USED_GINTS ARRAY_SIZE(used_gint)
-
-/* A table of which GINT is used by each GBUS interrupts (they are
-   assigned based on priority).  */
-static unsigned char gbus_int_gint[IRQ_GBUS_INT_NUM];
-
-
-/* Interrupt enabling/disabling.  */
-
-/* Enable interrupt handling for interrupt IRQ.  */
-void gbus_int_enable_irq (unsigned irq)
-{
-        unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-        GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-                |= GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Disable interrupt handling for interrupt IRQ.  Note that any
-   interrupts received while disabled will be delivered once the
-   interrupt is enabled again, unless they are explicitly cleared using
-   `gbus_int_clear_pending_irq'.  */
-void gbus_int_disable_irq (unsigned irq)
-{
-        unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-        GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-                &= ~GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Return true if interrupt handling for interrupt IRQ is enabled.  */
-int gbus_int_irq_enabled (unsigned irq)
-{
-        unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-        return (GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-                & GBUS_INT_IRQ_MASK(irq));
-}
-
-/* Disable all GBUS irqs.  */
-void gbus_int_disable_irqs ()
-{
-        unsigned w, n;
-        for (w = 0; w < GBUS_INT_NUM_WORDS; w++)
-                for (n = 0; n < IRQ_GINT_NUM; n++)
-                        GBUS_INT_ENABLE (w, n) = 0;
-}
-
-/* Clear any pending interrupts for IRQ.  */
-void gbus_int_clear_pending_irq (unsigned irq)
-{
-        GBUS_INT_CLEAR (GBUS_INT_IRQ_WORD(irq)) = GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Return true if interrupt IRQ is pending (but disabled).  */
-int gbus_int_irq_pending (unsigned irq)
-{
-        return (GBUS_INT_STATUS (GBUS_INT_IRQ_WORD(irq))
-                & GBUS_INT_IRQ_MASK(irq));
-}
-
-
-/* Delegating interrupts.  */
-
-/* Handle a shared GINT interrupt by passing to the appropriate GBUS
-   interrupt handler.  */
-static irqreturn_t gbus_int_handle_irq (int irq, void *dev_id,
-                                        struct pt_regs *regs)
-{
-        unsigned w;
-        irqreturn_t rval = IRQ_NONE;
-        unsigned gint = irq - IRQ_GINT (0);
-
-        for (w = 0; w < GBUS_INT_NUM_WORDS; w++) {
-                unsigned status = GBUS_INT_STATUS (w);
-                unsigned enable = GBUS_INT_ENABLE (w, gint);
-
-                /* Only pay attention to enabled interrupts.  */
-                status &= enable;
-                if (status) {
-                        irq = IRQ_GBUS_INT (w * GBUS_INT_BITS_PER_WORD);
-                        do {
-                                /* There's an active interrupt in word
-                                   W, find out which one, and call its
-                                   handler.  */
-
-                                while (! (status & 0x1)) {
-                                        irq++;
-                                        status >>= 1;
-                                }
-                                status &= ~0x1;
-
-                                /* Recursively call handle_irq to handle it. */
-                                handle_irq (irq, regs);
-                                rval = IRQ_HANDLED;
-                        } while (status);
-                }
-        }
-
-        /* Toggle the `all enable' bit back and forth, which should cause
-           another edge transition if there are any other interrupts
-           still pending, and so result in another CPU interrupt.  */
-        GBUS_INT_ENABLE (0, gint) &= ~0x1;
-        GBUS_INT_ENABLE (0, gint) |=  0x1;
-
-        return rval;
-}
-
-
-/* Initialize GBUS interrupt sources.  */
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned gbus_int_startup_irq (unsigned irq)
-{
-        unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-
-        if (gint_num_active_irqs[gint] == 0) {
-                /* First enable the CPU interrupt.  */
-                int rval =
-                        request_irq (IRQ_GINT(gint), gbus_int_handle_irq,
-                                     IRQF_DISABLED,
-                                     "gbus_int_handler",
-                                     &gint_num_active_irqs[gint]);
-                if (rval != 0)
-                        return rval;
-        }
-
-        gint_num_active_irqs[gint]++;
-
-        gbus_int_clear_pending_irq (irq);
-        gbus_int_enable_irq (irq);
-
-        return 0;
-}
-
-static void gbus_int_shutdown_irq (unsigned irq)
-{
-        unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-
-        gbus_int_disable_irq (irq);
-
-        if (--gint_num_active_irqs[gint] == 0)
-                /* Disable the CPU interrupt.  */
-                free_irq (IRQ_GINT(gint), &gint_num_active_irqs[gint]);
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
-                                     struct hw_interrupt_type *hw_irq_types)
-{
-        struct gbus_int_irq_init *init;
-        for (init = inits; init->name; init++) {
-                unsigned i;
-                struct hw_interrupt_type *hwit = hw_irq_types++;
-
-                hwit->typename = init->name;
-
-                hwit->startup  = gbus_int_startup_irq;
-                hwit->shutdown = gbus_int_shutdown_irq;
-                hwit->enable   = gbus_int_enable_irq;
-                hwit->disable  = gbus_int_disable_irq;
-                hwit->ack      = irq_nop;
-                hwit->end      = irq_nop;
-                
-                /* Initialize kernel IRQ infrastructure for this interrupt.  */
-                init_irq_handlers(init->base, init->num, init->interval, hwit);
-
-                /* Set the interrupt priorities.  */
-                for (i = 0; i < init->num; i++) {
-                        unsigned j;
-                        for (j = 0; j < NUM_USED_GINTS; j++)
-                                if (used_gint[j].priority > init->priority)
-                                        break;
-                        /* Wherever we stopped looking is one past the
-                           GINT we want. */
-                        gbus_int_gint[init->base + i * init->interval
-                                      - GBUS_INT_BASE_IRQ]
-                                = used_gint[j > 0 ? j - 1 : 0].gint;
-                }
-        }
-}
-
-
-/* Initialize IRQS.  */
-
-/* Chip interrupts (GINTn) shared among GBUS interrupts.  */
-static struct hw_interrupt_type gint_hw_itypes[NUM_USED_GINTS];
-
-
-/* GBUS interrupts themselves.  */
-
-struct gbus_int_irq_init gbus_irq_inits[] __initdata = {
-        /* First set defaults.  */
-        { "GBUS_INT", IRQ_GBUS_INT(0), IRQ_GBUS_INT_NUM, 1, 6},
-        { 0 }
-};
-#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
-
-static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
-
-
-/* Initialize GBUS interrupts.  */
-void __init gbus_int_init_irqs (void)
-{
-        unsigned i;
-
-        /* First initialize the shared gint interrupts.  */
-        for (i = 0; i < NUM_USED_GINTS; i++) {
-                unsigned gint = used_gint[i].gint;
-                struct v850e_intc_irq_init gint_irq_init[2];
-
-                /* We initialize one GINT interrupt at a time.  */
-                gint_irq_init[0].name = "GINT";
-                gint_irq_init[0].base = IRQ_GINT (gint);
-                gint_irq_init[0].num = 1;
-                gint_irq_init[0].interval = 1;
-                gint_irq_init[0].priority = used_gint[i].priority;
-
-                gint_irq_init[1].name = 0; /* Terminate the vector.  */
-
-                v850e_intc_init_irq_types (gint_irq_init, gint_hw_itypes);
-        }
-
-        /* Then the GBUS interrupts.  */
-        gbus_int_disable_irqs ();
-        gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
-        /* Turn on the `all enable' bits, which are ANDed with
-           individual interrupt enable bits; we only want to bother with
-           the latter.  They are the first bit in the first word of each
-           interrupt-enable area.  */
-        for (i = 0; i < NUM_USED_GINTS; i++)
-                GBUS_INT_ENABLE (0, used_gint[i].gint) = 0x1;
-}
diff --git a/arch/v850/kernel/head.S b/arch/v850/kernel/head.S
deleted file mode 100644
index c490b937ef14..000000000000
--- a/arch/v850/kernel/head.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/v850/kernel/head.S -- Lowest-level startup code
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/clinkage.h>
-#include <asm/current.h>
-#include <asm/entry.h>
-#include <asm/thread_info.h>
-#include <asm/irq.h>
-
-
-/* Make a slightly more convenient alias for C_SYMBOL_NAME.  */
-#define CSYM    C_SYMBOL_NAME
-
-
-        .text
-
-        // Define `mach_early_init' as a weak symbol
-        .global CSYM(mach_early_init)
-        .weak   CSYM(mach_early_init)
-
-C_ENTRY(start):
-        // Make sure interrupts are turned off, just in case
-        di
-
-#ifdef CONFIG_RESET_GUARD
-        // See if we got here via an unexpected reset
-        ld.w    RESET_GUARD, r19        // Check current value of reset guard
-        mov     RESET_GUARD_ACTIVE, r20
-        cmp     r19, r20
-        bne     1f                      // Guard was not active
-
-        // If we get here, the reset guard was active.  Load up some
-        // interesting values as arguments, and jump to the handler.
-        st.w    r0, RESET_GUARD         // Allow further resets to succeed
-        mov     lp, r6                  // Arg 0: return address
-        ld.b    KM, r7                  // Arg 1: kernel mode
-        mov     sp, r9                  // Arg 3: stack pointer
-        ld.w    KSP, r19                // maybe switch to kernel stack
-        cmp     r7, r0                  // see if already in kernel mode
-        cmov    z, r19, sp, sp          //  and switch to kernel stack if not
-        GET_CURRENT_TASK(r8)            // Arg 2: task pointer
-        jr      CSYM(unexpected_reset)
-
-1:      st.w    r20, RESET_GUARD        // Turn on reset guard
-#endif /* CONFIG_RESET_GUARD */
-
-        // Setup a temporary stack for doing pre-initialization function calls.
-        // 
-        // We can't use the initial kernel stack, because (1) it may be
-        // located in memory we're not allowed to touch, and (2) since
-        // it's in the data segment, calling memcpy to initialize that
-        // area from ROM will overwrite memcpy's return address.
-        mov     hilo(CSYM(_init_stack_end) - 4), sp
-
-        // See if there's a platform-specific early-initialization routine
-        // defined; it's a weak symbol, so it will have an address of zero if
-        // there's not.
-        mov     hilo(CSYM(mach_early_init)), r6
-        cmp     r6, r0
-        bz      3f
-
-        // There is one, so call it.  If this function is written in C, it
-        // should be very careful -- the stack pointer is valid, but very
-        // little else is (e.g., bss is not zeroed yet, and initialized data
-        // hasn't been).
-        jarl    2f, lp                  // first figure out return address
-2:      add     3f - ., lp
-        jmp     [r6]                    // do call
-3:
-
-#ifdef CONFIG_ROM_KERNEL
-        // Copy the data area from ROM to RAM
-        mov     hilo(CSYM(_rom_copy_dst_start)), r6
-        mov     hilo(CSYM(_rom_copy_src_start)), r7
-        mov     hilo(CSYM(_rom_copy_dst_end)), r8
-        sub     r6, r8
-        jarl    CSYM(memcpy), lp
-#endif
-
-        // Load the initial thread's stack, and current task pointer (in r16)
-        mov     hilo(CSYM(init_thread_union)), r19
-        movea   THREAD_SIZE, r19, sp
-        ld.w    TI_TASK[r19], CURRENT_TASK
-
-#ifdef CONFIG_TIME_BOOTUP
-        /* This stuff must come after mach_early_init, because interrupts may
-           not work until after its been called.  */
-        jarl    CSYM(highres_timer_reset), lp
-        jarl    CSYM(highres_timer_start), lp
-#endif
-
-        // Kernel stack pointer save location
-        st.w    sp, KSP
-
-        // Assert that we're in `kernel mode'
-        mov     1, r19
-        st.w    r19, KM
-
-#ifdef CONFIG_ZERO_BSS
-        // Zero bss area, since we can't rely upon any loader to do so
-        mov     hilo(CSYM(_sbss)), r6
-        mov     r0, r7
-        mov     hilo(CSYM(_ebss)), r8
-        sub     r6, r8
-        jarl    CSYM(memset), lp
-#endif
-
-        // What happens if the main kernel function returns (it shouldn't)
-        mov     hilo(CSYM(machine_halt)), lp
-
-        // Start the linux kernel.  We use an indirect jump to get extra
-        // range, because on some platforms this initial startup code
-        // (and the associated platform-specific code in mach_early_init)
-        // are located far away from the main kernel, e.g. so that they
-        // can initialize RAM first and copy the kernel or something.
-        mov     hilo(CSYM(start_kernel)), r12
-        jmp     [r12]
-C_END(start)
diff --git a/arch/v850/kernel/highres_timer.c b/arch/v850/kernel/highres_timer.c
deleted file mode 100644
index b16ad1eaf966..000000000000
--- a/arch/v850/kernel/highres_timer.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * arch/v850/kernel/highres_timer.c -- High resolution timing routines
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/system.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/highres_timer.h>
-
-#define HIGHRES_TIMER_USEC_SHIFT   12
-
-/* Pre-calculated constant used for converting ticks to real time
-   units.  We initialize it to prevent it being put into BSS.  */
-static u32 highres_timer_usec_prescale = 1;
-
-void highres_timer_slow_tick_irq (void) __attribute__ ((noreturn));
-void highres_timer_slow_tick_irq (void)
-{
-        /* This is an interrupt handler, so it must be very careful to
-           not to trash any registers.  At this point, the stack-pointer
-           (r3) has been saved in the chip ram location ENTRY_SP by the
-           interrupt vector, so we can use it as a scratch register; we
-           must also restore it before returning.  */
-        asm ("ld.w      %0[r0], sp;"
-             "add       1, sp;"
-             "st.w      sp, %0[r0];"
-             "ld.w      %1[r0], sp;" /* restore pre-irq stack-pointer */
-             "reti"
-             ::
-              "i" (HIGHRES_TIMER_SLOW_TICKS_ADDR),
-              "i" (ENTRY_SP_ADDR)
-             : "memory");
-}
-
-void highres_timer_reset (void)
-{
-        V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT) = 0;
-        HIGHRES_TIMER_SLOW_TICKS = 0;
-}
-
-void highres_timer_start (void)
-{
-        u32 fast_tick_rate;
-
-        /* Start hardware timer.  */
-        v850e_timer_d_configure (HIGHRES_TIMER_TIMER_D_UNIT,
-                                 HIGHRES_TIMER_SLOW_TICK_RATE);
-
-        fast_tick_rate =
-                (V850E_TIMER_D_BASE_FREQ
-                 >> V850E_TIMER_D_DIVLOG2 (HIGHRES_TIMER_TIMER_D_UNIT));
-
-        /* The obvious way of calculating microseconds from fast ticks
-           is to do:
-
-             usec = fast_ticks * 10^6 / fast_tick_rate
-
-           However, divisions are much slower than multiplications, and
-           the above calculation can overflow, so we do this instead:
-
-             usec = fast_ticks * (10^6 * 2^12 / fast_tick_rate) / 2^12
-
-           since we can pre-calculate (10^6 * (2^12 / fast_tick_rate))
-           and use a shift for dividing by 2^12, this avoids division,
-           and is almost as accurate (it differs by about 2 microseconds
-           at the extreme value of the fast-tick counter's ranger).  */
-        highres_timer_usec_prescale = ((1000000 << HIGHRES_TIMER_USEC_SHIFT)
-                                       / fast_tick_rate);
-
-        /* Enable the interrupt (which is hardwired to this use), and
-           give it the highest priority.  */
-        V850E_INTC_IC (IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT)) = 0;
-}
-
-void highres_timer_stop (void)
-{
-        /* Stop the timer.  */
-        V850E_TIMER_D_TMCD (HIGHRES_TIMER_TIMER_D_UNIT) =
-                V850E_TIMER_D_TMCD_CAE;
-        /* Disable its interrupt, just in case.  */
-        v850e_intc_disable_irq (IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT));
-}
-
-inline void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks)
-{
-        int flags;
-        u32 fast_ticks_1, fast_ticks_2, _slow_ticks;
-
-        local_irq_save (flags);
-        fast_ticks_1 = V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT);
-        _slow_ticks = HIGHRES_TIMER_SLOW_TICKS;
-        fast_ticks_2 = V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT);
-        local_irq_restore (flags);
-
-        if (fast_ticks_2 < fast_ticks_1)
-                _slow_ticks++;
-
-        *slow_ticks = _slow_ticks;
-        *fast_ticks = fast_ticks_2;
-}
-
-inline void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks,
-                                            struct timeval *tv)
-{
-        unsigned long sec, sec_rem, usec;
-
-        usec = ((fast_ticks * highres_timer_usec_prescale)
-                >> HIGHRES_TIMER_USEC_SHIFT);
-
-        sec = slow_ticks / HIGHRES_TIMER_SLOW_TICK_RATE;
-        sec_rem = slow_ticks % HIGHRES_TIMER_SLOW_TICK_RATE;
-
-        usec += sec_rem * (1000000 / HIGHRES_TIMER_SLOW_TICK_RATE);
-
-        tv->tv_sec = sec;
-        tv->tv_usec = usec;
-}
-
-void highres_timer_read (struct timeval *tv)
-{
-        u32 fast_ticks, slow_ticks;
-        highres_timer_read_ticks (&slow_ticks, &fast_ticks);
-        highres_timer_ticks_to_timeval (slow_ticks, fast_ticks, tv);
-}
diff --git a/arch/v850/kernel/init_task.c b/arch/v850/kernel/init_task.c
deleted file mode 100644
index 44b274dff33f..000000000000
--- a/arch/v850/kernel/init_task.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/v850/kernel/init_task.c -- Initial task/thread structures
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/fs.h>
-#include <linux/mqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-
-static struct fs_struct init_fs = INIT_FS;
-static struct signal_struct init_signals = INIT_SIGNALS (init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM (init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK (init_task);
-
-EXPORT_SYMBOL(init_task);
-
-/*
- * Initial thread structure.
- *
- * We need to make sure that this is 8192-byte aligned due to the
- * way process stacks are handled. This is done by having a special
- * "init_task" linker map entry.
- */
-union thread_union init_thread_union 
-        __attribute__((__section__(".data.init_task"))) =
-                { INIT_THREAD_INFO(init_task) };
diff --git a/arch/v850/kernel/intv.S b/arch/v850/kernel/intv.S
deleted file mode 100644
index 671e4c6150dd..000000000000
--- a/arch/v850/kernel/intv.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * arch/v850/kernel/intv.S -- Interrupt vectors
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/clinkage.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/entry.h>
-
-#ifdef CONFIG_V850E_HIGHRES_TIMER
-#include <asm/highres_timer.h>
-#endif
-
-/* Jump to an interrupt/trap handler.  These handlers (defined in entry.S)
-   expect the stack-pointer to be saved in ENTRY_SP, so we use sp to do an
-   indirect jump (which avoids problems when the handler is more than a signed
-   22-bit offset away).  */
-#define JUMP_TO_HANDLER(name, sp_save_loc)                                    \
-        st.w    sp, sp_save_loc;                                              \
-        mov     hilo(name), sp;                                               \
-        jmp     [sp]
-
-
-        /* Reset vector.  */
-        .section        .intv.reset, "ax"
-        .org    0x0
-        mov     hilo(C_SYMBOL_NAME(start)), r1;
-        jmp     [r1]
-
-
-        /* Generic interrupt vectors.  */
-        .section        .intv.common, "ax"
-        .balign 0x10
-        JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)     // 0x10 - NMI0
-        .balign 0x10
-        JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)     // 0x20 - NMI1
-        .balign 0x10
-        JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)     // 0x30 - NMI2
-        
-        .balign 0x10
-        JUMP_TO_HANDLER (trap, ENTRY_SP)        // 0x40 - TRAP0n
-        .balign 0x10
-        JUMP_TO_HANDLER (trap, ENTRY_SP)        // 0x50 - TRAP1n
-
-        .balign 0x10
-        JUMP_TO_HANDLER (dbtrap, ENTRY_SP)      // 0x60 - Illegal op / DBTRAP insn
-
-
-        /* Hardware interrupt vectors.  */
-        .section        .intv.mach, "ax"
-        .org    0x0
-
-#if defined (CONFIG_V850E_HIGHRES_TIMER) && defined (IRQ_INTCMD)
-
-        /* Interrupts before the highres timer interrupt.  */
-        .rept   IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT)
-        .balign 0x10
-        JUMP_TO_HANDLER (irq, ENTRY_SP)
-        .endr
-
-        /* The highres timer interrupt.  */
-        .balign 0x10
-        JUMP_TO_HANDLER (C_SYMBOL_NAME (highres_timer_slow_tick_irq), ENTRY_SP)
-
-        /* Interrupts after the highres timer interrupt.  */
-        .rept   NUM_CPU_IRQS - IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT) - 1
-        .balign 0x10
-        JUMP_TO_HANDLER (irq, ENTRY_SP)
-        .endr
-
-#else /* No highres timer */
-
-        .rept   NUM_CPU_IRQS
-        .balign 0x10
-        JUMP_TO_HANDLER (irq, ENTRY_SP)
-        .endr
-
-#endif /* Highres timer */
diff --git a/arch/v850/kernel/irq.c b/arch/v850/kernel/irq.c
deleted file mode 100644
index 858c45819aab..000000000000
--- a/arch/v850/kernel/irq.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/v850/kernel/irq.c -- High-level interrupt handling
- *
- *  Copyright (C) 2001,02,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04,05  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1994-2000  Ralf Baechle
- *  Copyright (C) 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was was derived from the mips version, arch/mips/kernel/irq.c
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/random.h>
-#include <linux/seq_file.h>
-
-#include <asm/system.h>
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves, it doesn't deserve
- * a generic callback i think.
- */
-void ack_bad_irq(unsigned int irq)
-{
-        printk("received IRQ %d with unknown interrupt type\n", irq);
-}
-
-volatile unsigned long irq_err_count, spurious_count;
-
-/*
- * Generic, controller-independent functions:
- */
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-        int irq = *(loff_t *) v;
-
-        if (irq == 0) {
-                int cpu;
-                seq_puts(p, "           ");
-                for (cpu=0; cpu < 1 /*smp_num_cpus*/; cpu++)
-                        seq_printf(p, "CPU%d       ", cpu);
-                seq_putc(p, '\n');
-        }
-
-        if (irq < NR_IRQS) {
-                unsigned long flags;
-                struct irqaction *action;
-
-                spin_lock_irqsave(&irq_desc[irq].lock, flags);
-
-                action = irq_desc[irq].action;
-                if (action) {
-                        int j;
-                        int count = 0;
-                        int num = -1;
-                        const char *type_name = irq_desc[irq].chip->typename;
-
-                        for (j = 0; j < NR_IRQS; j++)
-                                if (irq_desc[j].chip->typename == type_name){
-                                        if (irq == j)
-                                                num = count;
-                                        count++;
-                                }
-
-                        seq_printf(p, "%3d: ",irq);
-                        seq_printf(p, "%10u ", kstat_irqs(irq));
-                        if (count > 1) {
-                                int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1);
-                                seq_printf(p, " %*s%d", 14 - prec,
-                                           type_name, num);
-                        } else
-                                seq_printf(p, " %14s", type_name);
-                
-                        seq_printf(p, "  %s", action->name);
-                        for (action=action->next; action; action = action->next)
-                                seq_printf(p, ", %s", action->name);
-                        seq_putc(p, '\n');
-                }
-
-                spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
-        } else if (irq == NR_IRQS)
-                seq_printf(p, "ERR: %10lu\n", irq_err_count);
-
-        return 0;
-}
-
-/* Handle interrupt IRQ.  REGS are the registers at the time of ther
-   interrupt.  */
-unsigned int handle_irq (int irq, struct pt_regs *regs)
-{
-        irq_enter();
-        __do_IRQ(irq, regs);
-        irq_exit();
-        return 1;
-}
-
-/* Initialize irq handling for IRQs.
-   BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
-   to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
-void __init
-init_irq_handlers (int base_irq, int num, int interval,
-                   struct hw_interrupt_type *irq_type)
-{
-        while (num-- > 0) {
-                irq_desc[base_irq].status  = IRQ_DISABLED;
-                irq_desc[base_irq].action  = NULL;
-                irq_desc[base_irq].depth   = 1;
-                irq_desc[base_irq].chip = irq_type;
-                base_irq += interval;
-        }
-}
diff --git a/arch/v850/kernel/ma.c b/arch/v850/kernel/ma.c
deleted file mode 100644
index 143774de75e1..000000000000
--- a/arch/v850/kernel/ma.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/v850/kernel/ma.c -- V850E/MA series of cpu chips
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-        /* Start hardware timer.  */
-        v850e_timer_d_configure (0, HZ);
-        /* Install timer interrupt handler.  */
-        setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-        { "IRQ", 0,             NUM_MACH_IRQS,  1, 7 },
-        { "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM, 1, 5 },
-        { "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM, 1, 2 },
-        { "CSI", IRQ_INTCSI(0), IRQ_INTCSI_NUM, 4, 4 },
-        { "SER", IRQ_INTSER(0), IRQ_INTSER_NUM, 4, 3 },
-        { "SR",  IRQ_INTSR(0),  IRQ_INTSR_NUM,  4, 4 },
-        { "ST",  IRQ_INTST(0),  IRQ_INTST_NUM,  4, 5 },
-        { 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init ma_init_irqs (void)
-{
-        v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void ma_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-        /* We only know about the first two UART channels (though
-           specific chips may have more).  */
-        if (chan < 2) {
-                unsigned bits = 0x3 << (chan * 3);
-                /* Specify that the relevant pins on the chip should do
-                   serial I/O, not direct I/O.  */
-                MA_PORT4_PMC |= bits;
-                /* Specify that we're using the UART, not the CSI device.  */
-                MA_PORT4_PFC |= bits;
-        }
-}
diff --git a/arch/v850/kernel/mach.c b/arch/v850/kernel/mach.c
deleted file mode 100644
index b9db278d2b71..000000000000
--- a/arch/v850/kernel/mach.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/v850/kernel/mach.c -- Defaults for some things defined by "mach.h"
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include "mach.h"
-
-/* Called with each timer tick, if non-zero.  */
-void (*mach_tick)(void) = 0;
diff --git a/arch/v850/kernel/mach.h b/arch/v850/kernel/mach.h
deleted file mode 100644
index 9e0e4816ec56..000000000000
--- a/arch/v850/kernel/mach.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/v850/kernel/mach.h -- Machine-dependent functions used by v850 port
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MACH_H__
-#define __V850_MACH_H__
-
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-
-#include <asm/ptrace.h>
-#include <asm/entry.h>
-#include <asm/clinkage.h>
-
-void mach_setup (char **cmdline);
-void mach_gettimeofday (struct timespec *tv);
-void mach_sched_init (struct irqaction *timer_action);
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len);
-void mach_init_irqs (void);
-
-/* If defined, is called very early in the kernel initialization.  The
-   stack pointer is valid, but very little has been initialized (e.g.,
-   bss is not zeroed yet) when this is called, so care must taken.  */
-void mach_early_init (void);
-
-/* If defined, called after the bootmem allocator has been initialized,
-   to allow the platform-dependent code to reserve any areas of RAM that
-   the kernel shouldn't touch.  */
-void mach_reserve_bootmem (void) __attribute__ ((__weak__));
-
-/* Called with each timer tick, if non-zero.  */
-extern void (*mach_tick) (void);
-
-/* The following establishes aliases for various mach_ functions to the
-   name by which the rest of the kernel calls them.  These statements
-   should only have an effect in the file that defines the actual functions. */
-#define MACH_ALIAS(to, from)                                                  \
-   asm (".global " macrology_stringify (C_SYMBOL_NAME (to)) ";"               \
-        macrology_stringify (C_SYMBOL_NAME (to))                              \
-        " = " macrology_stringify (C_SYMBOL_NAME (from)))
-/* e.g.: MACH_ALIAS (kernel_name,       arch_spec_name);  */
-
-#endif /* __V850_MACH_H__ */
diff --git a/arch/v850/kernel/me2.c b/arch/v850/kernel/me2.c
deleted file mode 100644
index 007115dc9ce0..000000000000
--- a/arch/v850/kernel/me2.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/v850/kernel/me2.c -- V850E/ME2 chip-specific support
- *
- *  Copyright (C) 2003  NEC Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-        /* Start hardware timer.  */
-        v850e_timer_d_configure (0, HZ);
-        /* Install timer interrupt handler.  */
-        setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-        { "IRQ",    0,                NUM_CPU_IRQS,      1, 7 },
-        { "INTP",   IRQ_INTP(0),      IRQ_INTP_NUM,      1, 5 },
-        { "CMD",    IRQ_INTCMD(0),    IRQ_INTCMD_NUM,    1, 3 },
-        { "UBTIRE", IRQ_INTUBTIRE(0), IRQ_INTUBTIRE_NUM, 5, 4 },
-        { "UBTIR",  IRQ_INTUBTIR(0),  IRQ_INTUBTIR_NUM,  5, 4 },
-        { "UBTIT",  IRQ_INTUBTIT(0),  IRQ_INTUBTIT_NUM,  5, 4 },
-        { "UBTIF",  IRQ_INTUBTIF(0),  IRQ_INTUBTIF_NUM,  5, 4 },
-        { "UBTITO", IRQ_INTUBTITO(0), IRQ_INTUBTITO_NUM, 5, 4 },
-        { 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize V850E/ME2 chip interrupts.  */
-void __init me2_init_irqs (void)
-{
-        v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void me2_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-        if (chan == 0) {
-                /* Specify that the relevant pins on the chip should do
-                   serial I/O, not direct I/O.  */
-                ME2_PORT1_PMC |= 0xC;
-                /* Specify that we're using the UART, not the CSI device. */
-                ME2_PORT1_PFC |= 0xC;
-        } else if (chan == 1) {
-                /* Specify that the relevant pins on the chip should do
-                   serial I/O, not direct I/O.  */
-                ME2_PORT2_PMC |= 0x6;
-                /* Specify that we're using the UART, not the CSI device. */
-                ME2_PORT2_PFC |= 0x6;
-        }
-}
diff --git a/arch/v850/kernel/memcons.c b/arch/v850/kernel/memcons.c
deleted file mode 100644
index 92f514fdcc79..000000000000
--- a/arch/v850/kernel/memcons.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * arch/v850/kernel/memcons.c -- Console I/O to a memory buffer
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/init.h>
-
-/* If this device is enabled, the linker map should define start and
-   end points for its buffer. */
-extern char memcons_output[], memcons_output_end;
-
-/* Current offset into the buffer.  */
-static unsigned long memcons_offs = 0;
-
-/* Spinlock protecting memcons_offs.  */
-static DEFINE_SPINLOCK(memcons_lock);
-
-
-static size_t write (const char *buf, size_t len)
-{
-        unsigned long flags;
-        char *point;
-
-        spin_lock_irqsave (memcons_lock, flags);
-
-        point = memcons_output + memcons_offs;
-        if (point + len >= &memcons_output_end) {
-                len = &memcons_output_end - point;
-                memcons_offs = 0;
-        } else
-                memcons_offs += len;
-
-        spin_unlock_irqrestore (memcons_lock, flags);
-
-        memcpy (point, buf, len);
-
-        return len;
-}
-
-
-/*  Low-level console. */
-
-static void memcons_write (struct console *co, const char *buf, unsigned len)
-{
-        while (len > 0)
-                len -= write (buf, len);
-}
-
-static struct tty_driver *tty_driver;
-
-static struct tty_driver *memcons_device (struct console *co, int *index)
-{
-        *index = co->index;
-        return tty_driver;
-}
-
-static struct console memcons =
-{
-    .name       = "memcons",
-    .write      = memcons_write,
-    .device     = memcons_device,
-    .flags      = CON_PRINTBUFFER,
-    .index      = -1,
-};
-
-void memcons_setup (void)
-{
-        register_console (&memcons);
-        printk (KERN_INFO "Console: static memory buffer (memcons)\n");
-}
-
-/* Higher level TTY interface.  */
-
-int memcons_tty_open (struct tty_struct *tty, struct file *filp)
-{
-        return 0;
-}
-
-int memcons_tty_write (struct tty_struct *tty, const unsigned char *buf, int len)
-{
-        return write (buf, len);
-}
-
-int memcons_tty_write_room (struct tty_struct *tty)
-{
-        return &memcons_output_end - (memcons_output + memcons_offs);
-}
-
-int memcons_tty_chars_in_buffer (struct tty_struct *tty)
-{
-        /* We have no buffer.  */
-        return 0;
-}
-
-static const struct tty_operations ops = {
-        .open = memcons_tty_open,
-        .write = memcons_tty_write,
-        .write_room = memcons_tty_write_room,
-        .chars_in_buffer = memcons_tty_chars_in_buffer,
-};
-
-int __init memcons_tty_init (void)
-{
-        int err;
-        struct tty_driver *driver = alloc_tty_driver(1);
-        if (!driver)
-                return -ENOMEM;
-
-        driver->name = "memcons";
-        driver->major = TTY_MAJOR;
-        driver->minor_start = 64;
-        driver->type = TTY_DRIVER_TYPE_SYSCONS;
-        driver->init_termios = tty_std_termios;
-        tty_set_operations(driver, &ops);
-        err = tty_register_driver(driver);
-        if (err) {
-                put_tty_driver(driver);
-                return err;
-        }
-        tty_driver = driver;
-        return 0;
-}
-__initcall (memcons_tty_init);
diff --git a/arch/v850/kernel/module.c b/arch/v850/kernel/module.c
deleted file mode 100644
index 64aeb3e37c52..000000000000
--- a/arch/v850/kernel/module.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * arch/v850/kernel/module.c -- Architecture-specific module functions
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 2001,03  Rusty Russell
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- *
- * Derived in part from arch/ppc/kernel/module.c
- */
-
-#include <linux/kernel.h>
-#include <linux/vmalloc.h>
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt , ...)
-#endif
-
-void *module_alloc (unsigned long size)
-{
-        return size == 0 ? 0 : vmalloc (size);
-}
-
-void module_free (struct module *mod, void *module_region)
-{
-        vfree (module_region);
-        /* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-int module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-                     struct module *mod)
-{
-        return 0;
-}
-
-/* Count how many different relocations (different symbol, different
-   addend) */
-static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
-{
-        unsigned int i, j, ret = 0;
-
-        /* Sure, this is order(n^2), but it's usually short, and not
-           time critical */
-        for (i = 0; i < num; i++) {
-                for (j = 0; j < i; j++) {
-                        /* If this addend appeared before, it's
-                           already been counted */
-                        if (ELF32_R_SYM(rela[i].r_info)
-                            == ELF32_R_SYM(rela[j].r_info)
-                            && rela[i].r_addend == rela[j].r_addend)
-                                break;
-                }
-                if (j == i) ret++;
-        }
-        return ret;
-}
-
-/* Get the potential trampolines size required of the init and
-   non-init sections */
-static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
-                                  const Elf32_Shdr *sechdrs,
-                                  const char *secstrings,
-                                  int is_init)
-{
-        unsigned long ret = 0;
-        unsigned i;
-
-        /* Everything marked ALLOC (this includes the exported
-           symbols) */
-        for (i = 1; i < hdr->e_shnum; i++) {
-                /* If it's called *.init*, and we're not init, we're
-                   not interested */
-                if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-                    != is_init)
-                        continue;
-
-                if (sechdrs[i].sh_type == SHT_RELA) {
-                        DEBUGP("Found relocations in section %u\n", i);
-                        DEBUGP("Ptr: %p.  Number: %u\n",
-                               (void *)hdr + sechdrs[i].sh_offset,
-                               sechdrs[i].sh_size / sizeof(Elf32_Rela));
-                        ret += count_relocs((void *)hdr
-                                             + sechdrs[i].sh_offset,
-                                             sechdrs[i].sh_size
-                                             / sizeof(Elf32_Rela))
-                                * sizeof(struct v850_plt_entry);
-                }
-        }
-
-        return ret;
-}
-
-int module_frob_arch_sections(Elf32_Ehdr *hdr,
-                              Elf32_Shdr *sechdrs,
-                              char *secstrings,
-                              struct module *me)
-{
-        unsigned int i;
-
-        /* Find .plt and .pltinit sections */
-        for (i = 0; i < hdr->e_shnum; i++) {
-                if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0)
-                        me->arch.init_plt_section = i;
-                else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0)
-                        me->arch.core_plt_section = i;
-        }
-        if (!me->arch.core_plt_section || !me->arch.init_plt_section) {
-                printk("Module doesn't contain .plt or .plt.init sections.\n");
-                return -ENOEXEC;
-        }
-
-        /* Override their sizes */
-        sechdrs[me->arch.core_plt_section].sh_size
-                = get_plt_size(hdr, sechdrs, secstrings, 0);
-        sechdrs[me->arch.init_plt_section].sh_size
-                = get_plt_size(hdr, sechdrs, secstrings, 1);
-        return 0;
-}
-
-int apply_relocate (Elf32_Shdr *sechdrs, const char *strtab,
-                    unsigned int symindex, unsigned int relsec,
-                    struct module *mod)
-{
-        printk ("Barf\n");
-        return -ENOEXEC;
-}
-
-/* Set up a trampoline in the PLT to bounce us to the distant function */
-static uint32_t do_plt_call (void *location, Elf32_Addr val,
-                             Elf32_Shdr *sechdrs, struct module *mod)
-{
-        struct v850_plt_entry *entry;
-        /* Instructions used to do the indirect jump.  */
-        uint32_t tramp[2];
-
-        /* We have to trash a register, so we assume that any control
-           transfer more than 21-bits away must be a function call
-           (so we can use a call-clobbered register).  */
-        tramp[0] = 0x0621 + ((val & 0xffff) << 16);   /* mov sym, r1 ... */
-        tramp[1] = ((val >> 16) & 0xffff) + 0x610000; /* ...; jmp r1 */
-
-        /* Init, or core PLT? */
-        if (location >= mod->module_core
-            && location < mod->module_core + mod->core_size)
-                entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
-        else
-                entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
-
-        /* Find this entry, or if that fails, the next avail. entry */
-        while (entry->tramp[0])
-                if (entry->tramp[0] == tramp[0] && entry->tramp[1] == tramp[1])
-                        return (uint32_t)entry;
-                else
-                        entry++;
-
-        entry->tramp[0] = tramp[0];
-        entry->tramp[1] = tramp[1];
-
-        return (uint32_t)entry;
-}
-
-int apply_relocate_add (Elf32_Shdr *sechdrs, const char *strtab,
-                        unsigned int symindex, unsigned int relsec,
-                        struct module *mod)
-{
-        unsigned int i;
-        Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
-
-        DEBUGP ("Applying relocate section %u to %u\n", relsec,
-                sechdrs[relsec].sh_info);
-
-        for (i = 0; i < sechdrs[relsec].sh_size / sizeof (*rela); i++) {
-                /* This is where to make the change */
-                uint32_t *loc
-                        = ((void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-                           + rela[i].r_offset);
-                /* This is the symbol it is referring to.  Note that all
-                   undefined symbols have been resolved.  */
-                Elf32_Sym *sym
-                        = ((Elf32_Sym *)sechdrs[symindex].sh_addr
-                           + ELF32_R_SYM (rela[i].r_info));
-                uint32_t val = sym->st_value + rela[i].r_addend;
-
-                switch (ELF32_R_TYPE (rela[i].r_info)) {
-                case R_V850_32:
-                        /* We write two shorts instead of a long because even
-                           32-bit insns only need half-word alignment, but
-                           32-bit data writes need to be long-word aligned.  */
-                        val += ((uint16_t *)loc)[0];
-                        val += ((uint16_t *)loc)[1] << 16;
-                        ((uint16_t *)loc)[0] = val & 0xffff;
-                        ((uint16_t *)loc)[1] = (val >> 16) & 0xffff;
-                        break;
-
-                case R_V850_22_PCREL:
-                        /* Maybe jump indirectly via a PLT table entry.  */
-                        if ((int32_t)(val - (uint32_t)loc) > 0x1fffff
-                            || (int32_t)(val - (uint32_t)loc) < -0x200000)
-                                val = do_plt_call (loc, val, sechdrs, mod);
-
-                        val -= (uint32_t)loc;
-
-                        /* We write two shorts instead of a long because
-                           even 32-bit insns only need half-word alignment,
-                           but 32-bit data writes need to be long-word
-                           aligned.  */
-                        ((uint16_t *)loc)[0] =
-                                (*(uint16_t *)loc & 0xffc0) /* opcode + reg */
-                                | ((val >> 16) & 0xffc03f); /* offs high */
-                        ((uint16_t *)loc)[1] =
-                                (val & 0xffff);             /* offs low */
-                        break;
-
-                default:
-                        printk (KERN_ERR "module %s: Unknown reloc: %u\n",
-                                mod->name, ELF32_R_TYPE (rela[i].r_info));
-                        return -ENOEXEC;
-                }
-        }
-
-        return 0;
-}
-
-void
-module_arch_cleanup(struct module *mod)
-{
-}
diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c
deleted file mode 100644
index e4a4b8e7d5a3..000000000000
--- a/arch/v850/kernel/process.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * arch/v850/kernel/process.c -- Arch-dependent process handling
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/reboot.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-extern void ret_from_fork (void);
-
-
-/* The idle loop.  */
-static void default_idle (void)
-{
-        while (! need_resched ())
-                asm ("halt; nop; nop; nop; nop; nop" ::: "cc");
-}
-
-void (*idle)(void) = default_idle;
-
-/*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
- * low exit latency (ie sit in a loop waiting for
- * somebody to say that they'd like to reschedule)
- */
-void cpu_idle (void)
-{
-        /* endless idle loop with no priority at all */
-        while (1) {
-                while (!need_resched())
-                        (*idle) ();
-
-                preempt_enable_no_resched();
-                schedule();
-                preempt_disable();
-        }
-}
-
-/*
- * This is the mechanism for creating a new kernel thread.
- *
- * NOTE! Only a kernel-only process (ie the swapper or direct descendants who
- * haven't done an "execve()") should use this: it will work within a system
- * call from a "real" process, but the process memory space will not be free'd
- * until both the parent and the child have exited.
- */
-int kernel_thread (int (*fn)(void *), void *arg, unsigned long flags)
-{
-        register mm_segment_t fs = get_fs ();
-        register unsigned long syscall asm (SYSCALL_NUM);
-        register unsigned long arg0 asm (SYSCALL_ARG0);
-        register unsigned long ret asm (SYSCALL_RET);
-
-        set_fs (KERNEL_DS);
-
-        /* Clone this thread.  Note that we don't pass the clone syscall's
-           second argument -- it's ignored for calls from kernel mode (the
-           child's SP is always set to the top of the kernel stack).  */
-        arg0 = flags | CLONE_VM;
-        syscall = __NR_clone;
-        asm volatile ("trap " SYSCALL_SHORT_TRAP
-                      : "=r" (ret), "=r" (syscall)
-                      : "1" (syscall), "r" (arg0)
-                      : SYSCALL_SHORT_CLOBBERS);
-
-        if (ret == 0) {
-                /* In child thread, call FN and exit.  */
-                arg0 = (*fn) (arg);
-                syscall = __NR_exit;
-                asm volatile ("trap " SYSCALL_SHORT_TRAP
-                              : "=r" (ret), "=r" (syscall)
-                              : "1" (syscall), "r" (arg0)
-                              : SYSCALL_SHORT_CLOBBERS);
-        }
-
-        /* In parent.  */
-        set_fs (fs);
-
-        return ret;
-}
-
-void flush_thread (void)
-{
-        set_fs (USER_DS);
-}
-
-int copy_thread (int nr, unsigned long clone_flags,
-                 unsigned long stack_start, unsigned long stack_size,
-                 struct task_struct *p, struct pt_regs *regs)
-{
-        /* Start pushing stuff from the top of the child's kernel stack.  */
-        unsigned long orig_ksp = task_tos(p);
-        unsigned long ksp = orig_ksp;
-        /* We push two `state save' stack fames (see entry.S) on the new
-           kernel stack:
-             1) The innermost one is what switch_thread would have
-                pushed, and is used when we context switch to the child
-                thread for the first time.  It's set up to return to
-                ret_from_fork in entry.S.
-             2) The outermost one (nearest the top) is what a syscall
-                trap would have pushed, and is set up to return to the
-                same location as the parent thread, but with a return
-                value of 0. */
-        struct pt_regs *child_switch_regs, *child_trap_regs;
-
-        /* Trap frame.  */
-        ksp -= STATE_SAVE_SIZE;
-        child_trap_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET);
-        /* Switch frame.  */
-        ksp -= STATE_SAVE_SIZE;
-        child_switch_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET);
-
-        /* First copy parent's register state to child.  */
-        *child_switch_regs = *regs;
-        *child_trap_regs = *regs;
-
-        /* switch_thread returns to the restored value of the lp
-           register (r31), so we make that the place where we want to
-           jump when the child thread begins running.  */
-        child_switch_regs->gpr[GPR_LP] = (v850_reg_t)ret_from_fork;
-
-        if (regs->kernel_mode)
-                /* Since we're returning to kernel-mode, make sure the child's
-                   stored kernel stack pointer agrees with what the actual
-                   stack pointer will be at that point (the trap return code
-                   always restores the SP, even when returning to
-                   kernel-mode).  */
-                child_trap_regs->gpr[GPR_SP] = orig_ksp;
-        else
-                /* Set the child's user-mode stack-pointer (the name
-                   `stack_start' is a misnomer, it's just the initial SP
-                   value).  */
-                child_trap_regs->gpr[GPR_SP] = stack_start;
-
-        /* Thread state for the child (everything else is on the stack).  */
-        p->thread.ksp = ksp;
-
-        return 0;
-}
-
-/*
- * sys_execve() executes a new program.
- */
-int sys_execve (char *name, char **argv, char **envp, struct pt_regs *regs)
-{
-        char *filename = getname (name);
-        int error = PTR_ERR (filename);
-
-        if (! IS_ERR (filename)) {
-                error = do_execve (filename, argv, envp, regs);
-                putname (filename);
-        }
-
-        return error;
-}
-
-
-/*
- * These bracket the sleeping functions..
- */
-#define first_sched     ((unsigned long)__sched_text_start)
-#define last_sched      ((unsigned long)__sched_text_end)
-
-unsigned long get_wchan (struct task_struct *p)
-{
-#if 0  /* Barf.  Figure out the stack-layout later.  XXX  */
-        unsigned long fp, pc;
-        int count = 0;
-
-        if (!p || p == current || p->state == TASK_RUNNING)
-                return 0;
-
-        pc = thread_saved_pc (p);
-
-        /* This quite disgusting function walks up the stack, following
-           saved return address, until it something that's out of bounds
-           (as defined by `first_sched' and `last_sched').  It then
-           returns the last PC that was in-bounds.  */
-        do {
-                if (fp < stack_page + sizeof (struct task_struct) ||
-                    fp >= 8184+stack_page)
-                        return 0;
-                pc = ((unsigned long *)fp)[1];
-                if (pc < first_sched || pc >= last_sched)
-                        return pc;
-                fp = *(unsigned long *) fp;
-        } while (count++ < 16);
-#endif
-
-        return 0;
-}
diff --git a/arch/v850/kernel/procfs.c b/arch/v850/kernel/procfs.c
deleted file mode 100644
index e433cde789b4..000000000000
--- a/arch/v850/kernel/procfs.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/v850/kernel/procfs.c -- Introspection functions for /proc filesystem
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include "mach.h"
-
-static int cpuinfo_print (struct seq_file *m, void *v)
-{
-        extern unsigned long loops_per_jiffy;
-        
-        seq_printf (m, "CPU-Family:     v850\nCPU-Arch: %s\n", CPU_ARCH);
-
-#ifdef CPU_MODEL_LONG
-        seq_printf (m, "CPU-Model:      %s (%s)\n", CPU_MODEL, CPU_MODEL_LONG);
-#else
-        seq_printf (m, "CPU-Model:      %s\n", CPU_MODEL);
-#endif
-
-#ifdef CPU_CLOCK_FREQ
-        seq_printf (m, "CPU-Clock:      %ld (%ld MHz)\n",
-                    (long)CPU_CLOCK_FREQ,
-                    (long)CPU_CLOCK_FREQ / 1000000);
-#endif
-
-        seq_printf (m, "BogoMips:       %lu.%02lu\n",
-                    loops_per_jiffy/(500000/HZ),
-                    (loops_per_jiffy/(5000/HZ)) % 100);
-
-#ifdef PLATFORM_LONG
-        seq_printf (m, "Platform:       %s (%s)\n", PLATFORM, PLATFORM_LONG);
-#elif defined (PLATFORM)
-        seq_printf (m, "Platform:       %s\n", PLATFORM);
-#endif
-
-        return 0;
-}
-
-static void *cpuinfo_start (struct seq_file *m, loff_t *pos)
-{
-        return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
-}
-
-static void *cpuinfo_next (struct seq_file *m, void *v, loff_t *pos)
-{
-        ++*pos;
-        return cpuinfo_start (m, pos);
-}
-
-static void cpuinfo_stop (struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-        .start  = cpuinfo_start,
-        .next   = cpuinfo_next,
-        .stop   = cpuinfo_stop,
-        .show   = cpuinfo_print
-};
diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c
deleted file mode 100644
index a458ac941b25..000000000000
--- a/arch/v850/kernel/ptrace.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * arch/v850/kernel/ptrace.c -- `ptrace' system call
- *
- *  Copyright (C) 2002,03,04  NEC Electronics Corporation
- *  Copyright (C) 2002,03,04  Miles Bader <miles@gnu.org>
- *
- * Derived from arch/mips/kernel/ptrace.c:
- *
- *  Copyright (C) 1992 Ross Biro
- *  Copyright (C) Linus Torvalds
- *  Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
- *  Copyright (C) 1996 David S. Miller
- *  Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- *  Copyright (C) 1999 MIPS Technologies, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-
-/* Returns the address where the register at REG_OFFS in P is stashed away.  */
-static v850_reg_t *reg_save_addr (unsigned reg_offs, struct task_struct *t)
-{
-        struct pt_regs *regs;
-
-        /* Three basic cases:
-
-           (1) A register normally saved before calling the scheduler, is
-               available in the kernel entry pt_regs structure at the top
-               of the kernel stack.  The kernel trap/irq exit path takes
-               care to save/restore almost all registers for ptrace'd
-               processes.
-
-           (2) A call-clobbered register, where the process P entered the
-               kernel via [syscall] trap, is not stored anywhere; that's
-               OK, because such registers are not expected to be preserved
-               when the trap returns anyway (so we don't actually bother to
-               test for this case).
-
-           (3) A few registers not used at all by the kernel, and so
-               normally never saved except by context-switches, are in the
-               context switch state.  */
-
-        if (reg_offs == PT_CTPC || reg_offs == PT_CTPSW || reg_offs == PT_CTBP)
-                /* Register saved during context switch.  */
-                regs = thread_saved_regs (t);
-        else
-                /* Register saved during kernel entry (or not available).  */
-                regs = task_pt_regs (t);
-
-        return (v850_reg_t *)((char *)regs + reg_offs);
-}
-
-/* Set the bits SET and clear the bits CLEAR in the v850e DIR
-   (`debug information register').  Returns the new value of DIR.  */
-static inline v850_reg_t set_dir (v850_reg_t set, v850_reg_t clear)
-{
-        register v850_reg_t rval asm ("r10");
-        register v850_reg_t arg0 asm ("r6") = set;
-        register v850_reg_t arg1 asm ("r7") = clear;
-
-        /* The dbtrap handler has exactly this functionality when called
-           from kernel mode.  0xf840 is a `dbtrap' insn.  */
-        asm (".short 0xf840" : "=r" (rval) : "r" (arg0), "r" (arg1));
-
-        return rval;
-}
-
-/* Makes sure hardware single-stepping is (globally) enabled.
-   Returns true if successful.  */
-static inline int enable_single_stepping (void)
-{
-        static int enabled = 0; /* Remember whether we already did it.  */
-        if (! enabled) {
-                /* Turn on the SE (`single-step enable') bit, 0x100, in the
-                   DIR (`debug information register').  This may fail if a
-                   processor doesn't support it or something.  We also try
-                   to clear bit 0x40 (`INI'), which is necessary to use the
-                   debug stuff on the v850e2; on the v850e, clearing 0x40
-                   shouldn't cause any problem.  */
-                v850_reg_t dir = set_dir (0x100, 0x40);
-                /* Make sure it really got set.  */
-                if (dir & 0x100)
-                        enabled = 1;
-        }
-        return enabled;
-}
-
-/* Try to set CHILD's single-step flag to VAL.  Returns true if successful.  */
-static int set_single_step (struct task_struct *t, int val)
-{
-        v850_reg_t *psw_addr = reg_save_addr(PT_PSW, t);
-        if (val) {
-                /* Make sure single-stepping is enabled.  */
-                if (! enable_single_stepping ())
-                        return 0;
-                /* Set T's single-step flag.  */
-                *psw_addr |= 0x800;
-        } else
-                *psw_addr &= ~0x800;
-        return 1;
-}
-
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
-        int rval;
-
-        switch (request) {
-                unsigned long val;
-
-        case PTRACE_PEEKTEXT: /* read word at location addr. */
-        case PTRACE_PEEKDATA:
-                rval = generic_ptrace_peekdata(child, addr, data);
-                goto out;
-
-        case PTRACE_POKETEXT: /* write the word at location addr. */
-        case PTRACE_POKEDATA:
-                rval = generic_ptrace_pokedata(child, addr, data);
-                goto out;
-
-        /* Read/write the word at location ADDR in the registers.  */
-        case PTRACE_PEEKUSR:
-        case PTRACE_POKEUSR:
-                rval = 0;
-                if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
-                        /* Special requests that don't actually correspond
-                           to offsets in struct pt_regs.  */
-                        if (addr == PT_TEXT_ADDR)
-                                val = child->mm->start_code;
-                        else if (addr == PT_DATA_ADDR)
-                                val = child->mm->start_data;
-                        else if (addr == PT_TEXT_LEN)
-                                val = child->mm->end_code
-                                        - child->mm->start_code;
-                        else
-                                rval = -EIO;
-                } else if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
-                        v850_reg_t *reg_addr = reg_save_addr(addr, child);
-                        if (request == PTRACE_PEEKUSR)
-                                val = *reg_addr;
-                        else
-                                *reg_addr = data;
-                } else
-                        rval = -EIO;
-
-                if (rval == 0 && request == PTRACE_PEEKUSR)
-                        rval = put_user (val, (unsigned long *)data);
-                goto out;
-
-        /* Continue and stop at next (return from) syscall */
-        case PTRACE_SYSCALL:
-        /* Restart after a signal.  */
-        case PTRACE_CONT:
-        /* Execute a single instruction. */
-        case PTRACE_SINGLESTEP:
-                rval = -EIO;
-                if (!valid_signal(data))
-                        break;
-
-                /* Turn CHILD's single-step flag on or off.  */
-                if (! set_single_step (child, request == PTRACE_SINGLESTEP))
-                        break;
-
-                if (request == PTRACE_SYSCALL)
-                        set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-                else
-                        clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-                child->exit_code = data;
-                wake_up_process(child);
-                rval = 0;
-                break;
-
-        /*
-         * make the child exit.  Best I can do is send it a sigkill.
-         * perhaps it should be put in the status that it wants to
-         * exit.
-         */
-        case PTRACE_KILL:
-                rval = 0;
-                if (child->exit_state == EXIT_ZOMBIE)   /* already dead */
-                        break;
-                child->exit_code = SIGKILL;
-                wake_up_process(child);
-                break;
-
-        case PTRACE_DETACH: /* detach a process that was attached. */
-                set_single_step (child, 0);  /* Clear single-step flag */
-                rval = ptrace_detach(child, data);
-                break;
-
-        default:
-                rval = -EIO;
-                goto out;
-        }
- out:
-        return rval;
-}
-
-asmlinkage void syscall_trace(void)
-{
-        if (!test_thread_flag(TIF_SYSCALL_TRACE))
-                return;
-        if (!(current->ptrace & PT_PTRACED))
-                return;
-        /* The 0x80 provides a way for the tracing parent to distinguish
-           between a syscall stop and SIGTRAP delivery */
-        ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-                                 ? 0x80 : 0));
-        /*
-         * this isn't the same as continuing with a signal, but it will do
-         * for normal use.  strace only continues with a signal if the
-         * stopping signal is not SIGTRAP.  -brl
-         */
-        if (current->exit_code) {
-                send_sig(current->exit_code, current, 1);
-                current->exit_code = 0;
-        }
-}
-
-void ptrace_disable (struct task_struct *child)
-{
-        /* nothing to do */
-}
diff --git a/arch/v850/kernel/rte_cb.c b/arch/v850/kernel/rte_cb.c
deleted file mode 100644
index 43018e1edebd..000000000000
--- a/arch/v850/kernel/rte_cb.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * include/asm-v850/rte_cb.c -- Midas lab RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-static void led_tick (void);
-
-/* LED access routines.  */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-#ifdef CONFIG_RTE_CB_MULTI
-extern void multi_init (void);
-#endif
-
-
-void __init rte_cb_early_init (void)
-{
-        v850e_intc_disable_irqs ();
-
-#ifdef CONFIG_RTE_CB_MULTI
-        multi_init ();
-#endif
-}
-
-void __init mach_setup (char **cmdline)
-{
-#ifdef CONFIG_RTE_MB_A_PCI
-        /* Probe for Mother-A, and print a message if we find it.  */
-        *(volatile unsigned long *)MB_A_SRAM_ADDR = 0xDEADBEEF;
-        if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0xDEADBEEF) {
-                *(volatile unsigned long *)MB_A_SRAM_ADDR = 0x12345678;
-                if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0x12345678)
-                        printk (KERN_INFO
-                                "          NEC SolutionGear/Midas lab"
-                                " RTE-MOTHER-A motherboard\n");
-        }
-#endif /* CONFIG_RTE_MB_A_PCI */
-
-        mach_tick = led_tick;
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-        disable_reset_guard ();
-#endif
-        asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-/* This says `HALt.' in LEDese.  */
-static unsigned char halt_leds_msg[] = { 0x76, 0x77, 0x38, 0xF8 };
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-        disable_reset_guard ();
-#endif
-
-        /* Ignore all interrupts.  */
-        local_irq_disable ();
-
-        /* Write a little message.  */
-        write_leds (0, halt_leds_msg, sizeof halt_leds_msg);
-
-        /* Really halt.  */
-        for (;;)
-                asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-        machine_halt ();
-}
-
-
-/* Animated LED display for timer tick.  */
-
-#define TICK_UPD_FREQ   6
-static int tick_frames[][10] = {
-        { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, -1 },
-        { 0x63, 0x5c, -1 },
-        { 0x5c, 0x00, -1 },
-        { 0x63, 0x00, -1 },
-        { -1 }
-};
-
-static void led_tick ()
-{
-        static unsigned counter = 0;
-        
-        if (++counter == (HZ / TICK_UPD_FREQ)) {
-                /* Which frame we're currently displaying for each digit.  */
-                static unsigned frame_nums[LED_NUM_DIGITS] = { 0 };
-                /* Display image.  */
-                static unsigned char image[LED_NUM_DIGITS] = { 0 };
-                unsigned char prev_image[LED_NUM_DIGITS];
-                int write_to_leds = 1; /* true if we should actually display */
-                int digit;
-
-                /* We check to see if the physical LEDs contains what we last
-                   wrote to them; if not, we suppress display (this is so that
-                   users can write to the LEDs, and not have their output
-                   overwritten).  As a special case, we start writing again if
-                   all the LEDs are blank, or our display image is all zeros
-                   (indicating that this is the initial update, when the actual
-                   LEDs might contain random data).  */
-                read_leds (0, prev_image, LED_NUM_DIGITS);
-                for (digit = 0; digit < LED_NUM_DIGITS; digit++)
-                        if (image[digit] != prev_image[digit]
-                            && image[digit] && prev_image[digit])
-                        {
-                                write_to_leds = 0;
-                                break;
-                        }
-
-                /* Update display image.  */
-                for (digit = 0;
-                     digit < LED_NUM_DIGITS && tick_frames[digit][0] >= 0;
-                     digit++)
-                {
-                        int frame = tick_frames[digit][frame_nums[digit]];
-                        if (frame < 0) {
-                                image[digit] = tick_frames[digit][0];
-                                frame_nums[digit] = 1;
-                        } else {
-                                image[digit] = frame;
-                                frame_nums[digit]++;
-                                break;
-                        }
-                }
-
-                if (write_to_leds)
-                        /* Write the display image to the physical LEDs.  */
-                        write_leds (0, image, LED_NUM_DIGITS);
-
-                counter = 0;
-        }
-}
-
-
-/* Mother-A interrupts.  */
-
-#ifdef CONFIG_RTE_GBUS_INT
-
-#define L GBUS_INT_PRIORITY_LOW
-#define M GBUS_INT_PRIORITY_MEDIUM
-#define H GBUS_INT_PRIORITY_HIGH
-
-static struct gbus_int_irq_init gbus_irq_inits[] = {
-#ifdef CONFIG_RTE_MB_A_PCI
-        { "MB_A_LAN",   IRQ_MB_A_LAN,           1,                   1, L },
-        { "MB_A_PCI1",  IRQ_MB_A_PCI1(0),       IRQ_MB_A_PCI1_NUM,   1, L },
-        { "MB_A_PCI2",  IRQ_MB_A_PCI2(0),       IRQ_MB_A_PCI2_NUM,   1, L },
-        { "MB_A_EXT",   IRQ_MB_A_EXT(0),        IRQ_MB_A_EXT_NUM,    1, L },
-        { "MB_A_USB_OC",IRQ_MB_A_USB_OC(0),     IRQ_MB_A_USB_OC_NUM, 1, L },
-        { "MB_A_PCMCIA_OC",IRQ_MB_A_PCMCIA_OC,  1,                   1, L },
-#endif
-        { 0 }
-};
-#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
-
-static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
-
-#endif /* CONFIG_RTE_GBUS_INT */
-
-
-void __init rte_cb_init_irqs (void)
-{
-#ifdef CONFIG_RTE_GBUS_INT
-        gbus_int_init_irqs ();
-        gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
-#endif /* CONFIG_RTE_GBUS_INT */
-}
diff --git a/arch/v850/kernel/rte_cb_leds.c b/arch/v850/kernel/rte_cb_leds.c
deleted file mode 100644
index aa47ab1dcd87..000000000000
--- a/arch/v850/kernel/rte_cb_leds.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-v850/rte_cb_leds.c -- Midas lab RTE-CB board LED device support
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-
-#include <asm/uaccess.h>
-
-#define LEDS_MINOR      169     /* Minor device number, using misc major.  */
-
-/* The actual LED hardware is write-only, so we hold the contents here too.  */
-static unsigned char leds_image[LED_NUM_DIGITS] = { 0 };
-
-/* Spinlock protecting the above leds.  */
-static DEFINE_SPINLOCK(leds_lock);
-
-/* Common body of LED read/write functions, checks POS and LEN for
-   correctness, declares a variable using IMG_DECL, initialized pointing at
-   the POS position in the LED image buffer, and and iterates COPY_EXPR
-   until BUF is equal to the last buffer position; finally, sets LEN to be
-   the amount actually copied.  IMG should be a variable declaration
-   (without an initializer or a terminating semicolon); POS, BUF, and LEN
-   should all be simple variables.  */
-#define DO_LED_COPY(img_decl, pos, buf, len, copy_expr)                 \
-do {                                                                    \
-        if (pos > LED_NUM_DIGITS)                                       \
-                len = 0;                                                \
-        else {                                                          \
-                if (pos + len > LED_NUM_DIGITS)                         \
-                        len = LED_NUM_DIGITS - pos;                     \
-                                                                        \
-                if (len > 0) {                                          \
-                        unsigned long _flags;                           \
-                        const char *_end = buf + len;                   \
-                        img_decl = &leds_image[pos];                    \
-                                                                        \
-                        spin_lock_irqsave (leds_lock, _flags);          \
-                        do                                              \
-                                (copy_expr);                            \
-                        while (buf != _end);                            \
-                        spin_unlock_irqrestore (leds_lock, _flags);     \
-                }                                                       \
-        }                                                               \
-} while (0)
-
-/* Read LEN bytes from LEDs at position POS, into BUF.
-   Returns actual amount read.  */
-unsigned read_leds (unsigned pos, char *buf, unsigned len)
-{
-        DO_LED_COPY (const char *img, pos, buf, len, *buf++ = *img++);
-        return len;
-}
-
-/* Write LEN bytes to LEDs at position POS, from BUF.
-   Returns actual amount written.  */
-unsigned write_leds (unsigned pos, const char *buf, unsigned len)
-{
-        /* We write the actual LED values backwards, because
-           increasing memory addresses reflect LEDs right-to-left. */
-        volatile char *led = &LED (LED_NUM_DIGITS - pos - 1);
-        /* We invert the value written to the hardware, because 1 = off,
-           and 0 = on.  */
-        DO_LED_COPY (char *img, pos, buf, len,
-                     *led-- = 0xFF ^ (*img++ = *buf++));
-        return len;
-}
-
-
-/* Device functions.  */
-
-static ssize_t leds_dev_read (struct file *file, char *buf, size_t len,
-                              loff_t *pos)
-{
-        char temp_buf[LED_NUM_DIGITS];
-        len = read_leds (*pos, temp_buf, len);
-        if (copy_to_user (buf, temp_buf, len))
-                return -EFAULT;
-        *pos += len;
-        return len;
-}
-
-static ssize_t leds_dev_write (struct file *file, const char *buf, size_t len,
-                               loff_t *pos)
-{
-        char temp_buf[LED_NUM_DIGITS];
-        if (copy_from_user (temp_buf, buf, min_t(size_t, len, LED_NUM_DIGITS)))
-                return -EFAULT;
-        len = write_leds (*pos, temp_buf, len);
-        *pos += len;
-        return len;
-}
-
-static loff_t leds_dev_lseek (struct file *file, loff_t offs, int whence)
-{
-        if (whence == 1)
-                offs += file->f_pos; /* relative */
-        else if (whence == 2)
-                offs += LED_NUM_DIGITS; /* end-relative */
-
-        if (offs < 0 || offs > LED_NUM_DIGITS)
-                return -EINVAL;
-
-        file->f_pos = offs;
-
-        return 0;
-}
-
-static const struct file_operations leds_fops = {
-        .read           = leds_dev_read,
-        .write          = leds_dev_write,
-        .llseek         = leds_dev_lseek
-};
-
-static struct miscdevice leds_miscdev = {
-        .name           = "leds",
-        .minor          = LEDS_MINOR,
-        .fops           = &leds_fops
-};
-
-int __init leds_dev_init (void)
-{
-        return misc_register (&leds_miscdev);
-}
-
-__initcall (leds_dev_init);
diff --git a/arch/v850/kernel/rte_cb_multi.c b/arch/v850/kernel/rte_cb_multi.c
deleted file mode 100644
index 963d55ab34cc..000000000000
--- a/arch/v850/kernel/rte_cb_multi.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-v850/rte_multi.c -- Support for Multi debugger monitor ROM
- *      on Midas lab RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-
-#include <asm/machdep.h>
-
-#define IRQ_ADDR(irq) (0x80 + (irq) * 0x10)
-
-/* A table of which interrupt vectors to install, since blindly
-   installing all of them makes the debugger stop working.  This is a
-   list of offsets in the interrupt vector area; each entry means to
-   copy that particular 16-byte vector.  An entry less than zero ends
-   the table.  */
-static long multi_intv_install_table[] = {
-        /* Trap vectors */
-        0x40, 0x50,             
-
-#ifdef CONFIG_RTE_CB_MULTI_DBTRAP
-        /* Illegal insn / dbtrap.  These are used by multi, so only handle
-           them if configured to do so.  */
-        0x60,
-#endif
-
-        /* GINT1 - GINT3 (note, not GINT0!) */
-        IRQ_ADDR (IRQ_GINT(1)),
-        IRQ_ADDR (IRQ_GINT(2)),
-        IRQ_ADDR (IRQ_GINT(3)),
-
-        /* Timer D interrupts (up to 4 timers) */
-        IRQ_ADDR (IRQ_INTCMD(0)),
-#if IRQ_INTCMD_NUM > 1
-        IRQ_ADDR (IRQ_INTCMD(1)),
-#if IRQ_INTCMD_NUM > 2
-        IRQ_ADDR (IRQ_INTCMD(2)),
-#if IRQ_INTCMD_NUM > 3
-        IRQ_ADDR (IRQ_INTCMD(3)),
-#endif
-#endif
-#endif
-        
-        /* UART interrupts (up to 3 channels) */
-        IRQ_ADDR (IRQ_INTSER (0)), /* err */
-        IRQ_ADDR (IRQ_INTSR  (0)), /* rx */
-        IRQ_ADDR (IRQ_INTST  (0)), /* tx */
-#if IRQ_INTSR_NUM > 1
-        IRQ_ADDR (IRQ_INTSER (1)), /* err */
-        IRQ_ADDR (IRQ_INTSR  (1)), /* rx */
-        IRQ_ADDR (IRQ_INTST  (1)), /* tx */
-#if IRQ_INTSR_NUM > 2
-        IRQ_ADDR (IRQ_INTSER (2)), /* err */
-        IRQ_ADDR (IRQ_INTSR  (2)), /* rx */
-        IRQ_ADDR (IRQ_INTST  (2)), /* tx */
-#endif
-#endif
-
-        -1
-};
-
-/* Early initialization for kernel using Multi debugger ROM monitor.  */
-void __init multi_init (void)
-{
-        /* We're using the Multi debugger monitor, so we have to install
-           the interrupt vectors.  The monitor doesn't allow them to be
-           initially downloaded into their final destination because
-           it's in the monitor's scratch-RAM area.  Unfortunately, Multi
-           also doesn't deal correctly with ELF sections where the LMA
-           and VMA differ -- it just ignores the LMA -- so we can't use
-           that feature to work around the problem.  What we do instead
-           is just put the interrupt vectors into a normal section, and
-           do the necessary copying and relocation here.  Since the
-           interrupt vector basically only contains `jr' instructions
-           and no-ops, it's not that hard.  */
-        extern unsigned long _intv_load_start, _intv_start;
-        register unsigned long *src = &_intv_load_start;
-        register unsigned long *dst = (unsigned long *)INTV_BASE;
-        register unsigned long jr_fixup = (char *)&_intv_start - (char *)dst;
-        register long *ii;
-
-        /* Copy interrupt vectors as instructed by multi_intv_install_table. */
-        for (ii = multi_intv_install_table; *ii >= 0; ii++) {
-                /* Copy 16-byte interrupt vector at offset *ii.  */
-                int boffs;
-                for (boffs = 0; boffs < 0x10; boffs += sizeof *src) {
-                        /* Copy a single word, fixing up the jump offs
-                           if it's a `jr' instruction.  */
-                        int woffs = (*ii + boffs) / sizeof *src;
-                        unsigned long word = src[woffs];
-
-                        if ((word & 0xFC0) == 0x780) {
-                                /* A `jr' insn, fix up its offset (and yes, the
-                                   weird half-word swapping is intentional). */
-                                unsigned short hi = word & 0xFFFF;
-                                unsigned short lo = word >> 16;
-                                unsigned long udisp22
-                                        = lo + ((hi & 0x3F) << 16);
-                                long disp22 = (long)(udisp22 << 10) >> 10;
-
-                                disp22 += jr_fixup;
-
-                                hi = ((disp22 >> 16) & 0x3F) | 0x780;
-                                lo = disp22 & 0xFFFF;
-
-                                word = hi + (lo << 16);
-                        }
-
-                        dst[woffs] = word;
-                }
-        }
-}
diff --git a/arch/v850/kernel/rte_ma1_cb-rom.ld b/arch/v850/kernel/rte_ma1_cb-rom.ld
deleted file mode 100644
index 87b618f8253b..000000000000
--- a/arch/v850/kernel/rte_ma1_cb-rom.ld
+++ /dev/null
@@ -1,14 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/MA1-CB evaluation board
-   (CONFIG_RTE_CB_MA1), with kernel in ROM.  */
-
-MEMORY {
-        ROM   : ORIGIN = 0x00000000, LENGTH = 0x00100000
-        /* 1MB of SRAM.  This memory is mirrored 4 times.  */
-        SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-        /* 32MB of SDRAM.  */
-        SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-        ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/rte_ma1_cb.c b/arch/v850/kernel/rte_ma1_cb.c
deleted file mode 100644
index 08abf3d5f8df..000000000000
--- a/arch/v850/kernel/rte_ma1_cb.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/v850/kernel/rte_ma1_cb.c -- Midas labs RTE-V850E/MA1-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/ma1.h>
-#include <asm/rte_ma1_cb.h>
-#include <asm/v850e_timer_c.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are almost contiguous (with a small hole in between;
-   see mach_reserve_bootmem for details), so just use both as one big area.  */
-#define RAM_START       SRAM_ADDR
-#define RAM_END         (SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_early_init (void)
-{
-        rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-                                   unsigned long *ram_len)
-{
-        *ram_start = RAM_START;
-        *ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-#ifdef CONFIG_RTE_CB_MULTI
-        /* Prevent the kernel from touching the monitor's scratch RAM.  */
-        reserve_bootmem(MON_SCRATCH_ADDR, MON_SCRATCH_SIZE,
-                        BOOTMEM_DEFAULT);
-#endif
-
-        /* The space between SRAM and SDRAM is filled with duplicate
-           images of SRAM.  Prevent the kernel from using them.  */
-        reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-                         SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-                         BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-        tv->tv_sec = 0;
-        tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_ma1_cb_uart_pre_configure (unsigned chan,
-                                    unsigned cflags, unsigned baud)
-{
-        /* The RTE-MA1-CB connects some general-purpose I/O pins on the
-           CPU to the RTS/CTS lines of UART 0's serial connection.
-           I/O pins P42 and P43 are RTS and CTS respectively.  */
-        if (chan == 0) {
-                /* Put P42 & P43 in I/O port mode.  */
-                MA_PORT4_PMC &= ~0xC;
-                /* Make P42 an output, and P43 an input.  */
-                MA_PORT4_PM = (MA_PORT4_PM & ~0xC) | 0x8;
-        }
-
-        /* Do pre-configuration for the actual UART.  */
-        ma_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-        unsigned tc;
-
-        /* Initialize interrupts.  */
-        ma_init_irqs ();
-        rte_cb_init_irqs ();
-
-        /* Use falling-edge-sensitivity for interrupts .  */
-        V850E_TIMER_C_SESC (0) &= ~0xC;
-        V850E_TIMER_C_SESC (1) &= ~0xF;
-
-        /* INTP000-INTP011 are shared with `Timer C', so we have to set
-           up Timer C to pass them through as raw interrupts.  */
-        for (tc = 0; tc < 2; tc++)
-                /* Turn on the timer.  */
-                V850E_TIMER_C_TMCC0 (tc) |= V850E_TIMER_C_TMCC0_CAE;
-
-        /* Make sure the relevant port0/port1 pins are assigned
-           interrupt duty.  We used INTP001-INTP011 (don't screw with
-           INTP000 because the monitor uses it).  */
-        MA_PORT0_PMC |= 0x4;    /* P02 (INTP001) in IRQ mode.  */
-        MA_PORT1_PMC |= 0x6;    /* P11 (INTP010) & P12 (INTP011) in IRQ mode.*/
-}
diff --git a/arch/v850/kernel/rte_ma1_cb.ld b/arch/v850/kernel/rte_ma1_cb.ld
deleted file mode 100644
index c8e16d16be41..000000000000
--- a/arch/v850/kernel/rte_ma1_cb.ld
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/MA1-CB evaluation board
-   (CONFIG_RTE_CB_MA1), with kernel in SDRAM, under Multi debugger.  */
-
-MEMORY {
-        /* 1MB of SRAM; we can't use the last 32KB, because it's used by
-           the monitor scratch-RAM.  This memory is mirrored 4 times.  */
-        SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = (SRAM_SIZE - MON_SCRATCH_SIZE)
-        /* Monitor scratch RAM; only the interrupt vectors should go here.  */
-        MRAM  : ORIGIN = MON_SCRATCH_ADDR,  LENGTH = MON_SCRATCH_SIZE
-        /* 32MB of SDRAM.  */
-        SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_MA1_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-        /* We can't use RAMK_KRAM_CONTENTS because that puts the whole
-           kernel in a single ELF segment, and the Multi debugger (which
-           we use to load the kernel) appears to have bizarre problems
-           dealing with it.  */
-
-        .text : {
-                __kram_start = . ;
-                TEXT_CONTENTS
-        } > KRAM
-
-        .data : {
-                DATA_CONTENTS
-                BSS_CONTENTS
-                RAMK_INIT_CONTENTS
-                __kram_end = . ;
-                BOOTMAP_CONTENTS
-
-                /* The address at which the interrupt vectors are initially
-                   loaded by the loader.  We can't load the interrupt vectors
-                   directly into their target location, because the monitor
-                   ROM for the GHS Multi debugger barfs if we try.
-                   Unfortunately, Multi also doesn't deal correctly with ELF
-                   sections where the LMA and VMA differ (it just ignores the
-                   LMA), so we can't use that feature to work around the
-                   problem!  What we do instead is just put the interrupt
-                   vectors into a normal section, and have the
-                   `mach_early_init' function for Midas boards do the
-                   necessary copying and relocation at runtime (this section
-                   basically only contains `jr' instructions, so it's not
-                   that hard).  */
-                . = ALIGN (0x10) ;
-                __intv_load_start = . ;
-                INTV_CONTENTS
-        } > KRAM
-
-        .root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_mb_a_pci.c b/arch/v850/kernel/rte_mb_a_pci.c
deleted file mode 100644
index 687e367d8b64..000000000000
--- a/arch/v850/kernel/rte_mb_a_pci.c
+++ /dev/null
@@ -1,819 +0,0 @@
-/*
- * arch/v850/kernel/mb_a_pci.c -- PCI support for Midas lab RTE-MOTHER-A board
- *
- *  Copyright (C) 2001,02,03,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-
-/* __nomods_init is like __devinit, but is a no-op when modules are enabled.
-   This is used by some routines that can be called either during boot
-   or by a module.  */
-#ifdef CONFIG_MODULES
-#define __nomods_init /*nothing*/
-#else
-#define __nomods_init __devinit
-#endif
-
-/* PCI devices on the Mother-A board can only do DMA to/from the MB SRAM
-   (the RTE-V850E/MA1-CB cpu board doesn't support PCI access to
-   CPU-board memory), and since linux DMA buffers are allocated in
-   normal kernel memory, we basically have to copy DMA blocks around
-   (this is like a `bounce buffer').  When a DMA block is `mapped', we
-   allocate an identically sized block in MB SRAM, and if we're doing
-   output to the device, copy the CPU-memory block to the MB-SRAM block.
-   When an active block is `unmapped', we will copy the block back to
-   CPU memory if necessary, and then deallocate the MB SRAM block.
-   Ack.  */
-
-/* Where the motherboard SRAM is in the PCI-bus address space (the
-   first 512K of it is also mapped at PCI address 0).  */
-#define PCI_MB_SRAM_ADDR 0x800000
-
-/* Convert CPU-view MB SRAM address to/from PCI-view addresses of the
-   same memory.  */
-#define MB_SRAM_TO_PCI(mb_sram_addr) \
-   ((dma_addr_t)mb_sram_addr - MB_A_SRAM_ADDR + PCI_MB_SRAM_ADDR)
-#define PCI_TO_MB_SRAM(pci_addr)     \
-   (void *)(pci_addr - PCI_MB_SRAM_ADDR + MB_A_SRAM_ADDR)
-
-static void pcibios_assign_resources (void);
-
-struct mb_pci_dev_irq {
-        unsigned dev;           /* PCI device number */
-        unsigned irq_base;      /* First IRQ  */
-        unsigned query_pin;     /* True if we should read the device's
-                                   Interrupt Pin info, and allocate
-                                   interrupt IRQ_BASE + PIN.  */
-};
-
-/* PCI interrupts are mapped statically to GBUS interrupts.  */
-static struct mb_pci_dev_irq mb_pci_dev_irqs[] = {
-        /* Motherboard SB82558 ethernet controller */
-        { 10,   IRQ_MB_A_LAN,           0 },
-        /* PCI slot 1 */
-        { 8,    IRQ_MB_A_PCI1(0),       1 },
-        /* PCI slot 2 */
-        { 9,    IRQ_MB_A_PCI2(0),       1 }
-};
-#define NUM_MB_PCI_DEV_IRQS ARRAY_SIZE(mb_pci_dev_irqs)
-
-
-/* PCI configuration primitives.  */
-
-#define CONFIG_DMCFGA(bus, devfn, offs)                                 \
-   (0x80000000                                                          \
-    | ((offs) & ~0x3)                                                   \
-    | ((devfn) << 8)                                                    \
-    | ((bus)->number << 16))
-
-static int
-mb_pci_read (struct pci_bus *bus, unsigned devfn, int offs, int size, u32 *rval)
-{
-        u32 addr;
-        int flags;
-
-        local_irq_save (flags);
-
-        MB_A_PCI_PCICR = 0x7;
-        MB_A_PCI_DMCFGA = CONFIG_DMCFGA (bus, devfn, offs);
-
-        addr = MB_A_PCI_IO_ADDR + (offs & 0x3);
-
-        switch (size) {
-        case 1: *rval = *(volatile  u8 *)addr; break;
-        case 2: *rval = *(volatile u16 *)addr; break;
-        case 4: *rval = *(volatile u32 *)addr; break;
-        }
-
-        if (MB_A_PCI_PCISR & 0x2000) {
-                MB_A_PCI_PCISR = 0x2000;
-                *rval = ~0;
-        }
-
-        MB_A_PCI_DMCFGA = 0;
-
-        local_irq_restore (flags);
-
-        return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-mb_pci_write (struct pci_bus *bus, unsigned devfn, int offs, int size, u32 val)
-{
-        u32 addr;
-        int flags;
-
-        local_irq_save (flags);
-
-        MB_A_PCI_PCICR = 0x7;
-        MB_A_PCI_DMCFGA = CONFIG_DMCFGA (bus, devfn, offs);
-
-        addr = MB_A_PCI_IO_ADDR + (offs & 0x3);
-
-        switch (size) {
-        case 1: *(volatile  u8 *)addr = val; break;
-        case 2: *(volatile u16 *)addr = val; break;
-        case 4: *(volatile u32 *)addr = val; break;
-        }
-
-        if (MB_A_PCI_PCISR & 0x2000)
-                MB_A_PCI_PCISR = 0x2000;
-
-        MB_A_PCI_DMCFGA = 0;
-
-        local_irq_restore (flags);
-
-        return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops mb_pci_config_ops = {
-        .read   = mb_pci_read,
-        .write  = mb_pci_write,
-};
-
-
-/* PCI Initialization.  */
-
-static struct pci_bus *mb_pci_bus = 0;
-
-/* Do initial PCI setup.  */
-static int __devinit pcibios_init (void)
-{
-        u32 id = MB_A_PCI_PCIHIDR;
-        u16 vendor = id & 0xFFFF;
-        u16 device = (id >> 16) & 0xFFFF;
-
-        if (vendor == PCI_VENDOR_ID_PLX && device == PCI_DEVICE_ID_PLX_9080) {
-                printk (KERN_INFO
-                        "PCI: PLX Technology PCI9080 HOST/PCI bridge\n");
-
-                MB_A_PCI_PCICR = 0x147;
-
-                MB_A_PCI_PCIBAR0 = 0x007FFF00;
-                MB_A_PCI_PCIBAR1 = 0x0000FF00;
-                MB_A_PCI_PCIBAR2 = 0x00800000;
-
-                MB_A_PCI_PCILTR = 0x20;
-
-                MB_A_PCI_PCIPBAM |= 0x3;
-
-                MB_A_PCI_PCISR =  ~0; /* Clear errors.  */
-
-                /* Reprogram the motherboard's IO/config address space,
-                   as we don't support the GCS7 address space that the
-                   default uses.  */
-
-                /* Significant address bits used for decoding PCI GCS5 space
-                   accesses.  */
-                MB_A_PCI_DMRR = ~(MB_A_PCI_MEM_SIZE - 1);
-
-                /* I don't understand this, but the SolutionGear example code
-                   uses such an offset, and it doesn't work without it.  XXX */
-#if GCS5_SIZE == 0x00800000
-#define GCS5_CFG_OFFS 0x00800000
-#else
-#define GCS5_CFG_OFFS 0
-#endif
-
-                /* Address bit values for matching.  Note that we have to give
-                   the address from the motherboard's point of view, which is
-                   different than the CPU's.  */
-                /* PCI memory space.  */
-                MB_A_PCI_DMLBAM = GCS5_CFG_OFFS + 0x0;
-                /* PCI I/O space.  */
-                MB_A_PCI_DMLBAI =
-                        GCS5_CFG_OFFS + (MB_A_PCI_IO_ADDR - GCS5_ADDR);
-
-                mb_pci_bus = pci_scan_bus (0, &mb_pci_config_ops, 0);
-
-                pcibios_assign_resources ();
-        } else
-                printk (KERN_ERR "PCI: HOST/PCI bridge not found\n");
-
-        return 0;
-}
-
-subsys_initcall (pcibios_init);
-
-char __devinit *pcibios_setup (char *option)
-{
-        /* Don't handle any options. */
-        return option;
-}
-
-
-int __nomods_init pcibios_enable_device (struct pci_dev *dev, int mask)
-{
-        u16 cmd, old_cmd;
-        int idx;
-        struct resource *r;
-
-        pci_read_config_word(dev, PCI_COMMAND, &cmd);
-        old_cmd = cmd;
-        for (idx = 0; idx < 6; idx++) {
-                r = &dev->resource[idx];
-                if (!r->start && r->end) {
-                        printk(KERN_ERR "PCI: Device %s not available because "
-                               "of resource collisions\n", pci_name(dev));
-                        return -EINVAL;
-                }
-                if (r->flags & IORESOURCE_IO)
-                        cmd |= PCI_COMMAND_IO;
-                if (r->flags & IORESOURCE_MEM)
-                        cmd |= PCI_COMMAND_MEMORY;
-        }
-        if (cmd != old_cmd) {
-                printk("PCI: Enabling device %s (%04x -> %04x)\n",
-                       pci_name(dev), old_cmd, cmd);
-                pci_write_config_word(dev, PCI_COMMAND, cmd);
-        }
-        return 0;
-}
-
-
-/* Resource allocation.  */
-static void __devinit pcibios_assign_resources (void)
-{
-        struct pci_dev *dev = NULL;
-        struct resource *r;
-
-        for_each_pci_dev(dev) {
-                unsigned di_num;
-                unsigned class = dev->class >> 8;
-
-                if (class && class != PCI_CLASS_BRIDGE_HOST) {
-                        unsigned r_num;
-                        for(r_num = 0; r_num < 6; r_num++) {
-                                r = &dev->resource[r_num];
-                                if (!r->start && r->end)
-                                        pci_assign_resource (dev, r_num);
-                        }
-                }
-
-                /* Assign interrupts.  */
-                for (di_num = 0; di_num < NUM_MB_PCI_DEV_IRQS; di_num++) {
-                        struct mb_pci_dev_irq *di = &mb_pci_dev_irqs[di_num];
-
-                        if (di->dev == PCI_SLOT (dev->devfn)) {
-                                unsigned irq = di->irq_base;
-
-                                if (di->query_pin) {
-                                        /* Find out which interrupt pin
-                                           this device uses (each PCI
-                                           slot has 4).  */
-                                        u8 irq_pin;
-
-                                        pci_read_config_byte (dev,
-                                                             PCI_INTERRUPT_PIN,
-                                                              &irq_pin);
-
-                                        if (irq_pin == 0)
-                                                /* Doesn't use interrupts.  */ 
-                                                continue;
-                                        else
-                                                irq += irq_pin - 1;
-                                }
-
-                                pcibios_update_irq (dev, irq);
-                        }
-                }
-        }
-}
-
-void __devinit pcibios_update_irq (struct pci_dev *dev, int irq)
-{
-        dev->irq = irq;
-        pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
-}
-
-void __devinit
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-                        struct resource *res)
-{
-        unsigned long offset = 0;
-
-        if (res->flags & IORESOURCE_IO) {
-                offset = MB_A_PCI_IO_ADDR;
-        } else if (res->flags & IORESOURCE_MEM) {
-                offset = MB_A_PCI_MEM_ADDR;
-        }
-
-        region->start = res->start - offset;
-        region->end = res->end - offset;
-}
-
-
-/* Stubs for things we don't use.  */
-
-/* Called after each bus is probed, but before its children are examined. */
-void pcibios_fixup_bus(struct pci_bus *b)
-{
-}
-
-void
-pcibios_align_resource (void *data, struct resource *res,
-                        resource_size_t size, resource_size_t align)
-{
-}
-
-void pcibios_set_master (struct pci_dev *dev)
-{
-}
-
-
-/* Mother-A SRAM memory allocation.  This is a simple first-fit allocator.  */
-
-/* A memory free-list node.  */
-struct mb_sram_free_area {
-        void *mem;
-        unsigned long size;
-        struct mb_sram_free_area *next;
-};
-
-/* The tail of the free-list, which starts out containing all the SRAM.  */
-static struct mb_sram_free_area mb_sram_free_tail = {
-        (void *)MB_A_SRAM_ADDR, MB_A_SRAM_SIZE, 0
-};
-
-/* The free-list.  */
-static struct mb_sram_free_area *mb_sram_free_areas = &mb_sram_free_tail;
-
-/* The free-list of free free-list nodes. (:-)  */
-static struct mb_sram_free_area *mb_sram_free_free_areas = 0;
-
-/* Spinlock protecting the above globals.  */
-static DEFINE_SPINLOCK(mb_sram_lock);
-
-/* Allocate a memory block at least SIZE bytes long in the Mother-A SRAM
-   space.  */
-static void *alloc_mb_sram (size_t size)
-{
-        struct mb_sram_free_area *prev, *fa;
-        unsigned long flags;
-        void *mem = 0;
-
-        spin_lock_irqsave (mb_sram_lock, flags);
-
-        /* Look for a free area that can contain SIZE bytes.  */
-        for (prev = 0, fa = mb_sram_free_areas; fa; prev = fa, fa = fa->next)
-                if (fa->size >= size) {
-                        /* Found one!  */
-                        mem = fa->mem;
-
-                        if (fa->size == size) {
-                                /* In fact, it fits exactly, so remove
-                                   this node from the free-list.  */
-                                if (prev)
-                                        prev->next = fa->next;
-                                else
-                                        mb_sram_free_areas = fa->next;
-                                /* Put it on the free-list-entry-free-list. */
-                                fa->next = mb_sram_free_free_areas;
-                                mb_sram_free_free_areas = fa;
-                        } else {
-                                /* FA is bigger than SIZE, so just
-                                   reduce its size to account for this
-                                   allocation.  */
-                                fa->mem += size;
-                                fa->size -= size;
-                        }
-
-                        break;
-                }
-
-        spin_unlock_irqrestore (mb_sram_lock, flags);
-
-        return mem;
-}
-
-/* Return the memory area MEM of size SIZE to the MB SRAM free pool.  */
-static void free_mb_sram (void *mem, size_t size)
-{
-        struct mb_sram_free_area *prev, *fa, *new_fa;
-        unsigned long flags;
-        void *end = mem + size;
-
-        spin_lock_irqsave (mb_sram_lock, flags);
-
- retry:
-        /* Find an adjacent free-list entry.  */
-        for (prev = 0, fa = mb_sram_free_areas; fa; prev = fa, fa = fa->next)
-                if (fa->mem == end) {
-                        /* FA is just after MEM, grow down to encompass it. */
-                        fa->mem = mem;
-                        fa->size += size;
-                        goto done;
-                } else if (fa->mem + fa->size == mem) {
-                        struct mb_sram_free_area *next_fa = fa->next;
-
-                        /* FA is just before MEM, expand to encompass it. */
-                        fa->size += size;
-
-                        /* See if FA can now be merged with its successor. */
-                        if (next_fa && fa->mem + fa->size == next_fa->mem) {
-                                /* Yup; merge NEXT_FA's info into FA.  */
-                                fa->size += next_fa->size;
-                                fa->next = next_fa->next;
-                                /* Free NEXT_FA.  */
-                                next_fa->next = mb_sram_free_free_areas;
-                                mb_sram_free_free_areas = next_fa;
-                        }
-                        goto done;
-                } else if (fa->mem > mem)
-                        /* We've reached the right spot in the free-list
-                           without finding an adjacent free-area, so add
-                           a new free area to hold mem. */
-                        break;
-
-        /* Make a new free-list entry.  */
-
-        /* First, get a free-list entry.  */
-        if (! mb_sram_free_free_areas) {
-                /* There are none, so make some.  */
-                void *block;
-                size_t block_size = sizeof (struct mb_sram_free_area) * 8;
-
-                /* Don't hold the lock while calling kmalloc (I'm not
-                   sure whether it would be a problem, since we use
-                   GFP_ATOMIC, but it makes me nervous).  */
-                spin_unlock_irqrestore (mb_sram_lock, flags);
-
-                block = kmalloc (block_size, GFP_ATOMIC);
-                if (! block)
-                        panic ("free_mb_sram: can't allocate free-list entry");
-
-                /* Now get the lock back.  */
-                spin_lock_irqsave (mb_sram_lock, flags);
-
-                /* Add the new free free-list entries.  */
-                while (block_size > 0) {
-                        struct mb_sram_free_area *nfa = block;
-                        nfa->next = mb_sram_free_free_areas;
-                        mb_sram_free_free_areas = nfa;
-                        block += sizeof *nfa;
-                        block_size -= sizeof *nfa;
-                }
-
-                /* Since we dropped the lock to call kmalloc, the
-                   free-list could have changed, so retry from the
-                   beginning.  */
-                goto retry;
-        }
-
-        /* Remove NEW_FA from the free-list of free-list entries.  */
-        new_fa = mb_sram_free_free_areas;
-        mb_sram_free_free_areas = new_fa->next;
-
-        /* NEW_FA initially holds only MEM.  */
-        new_fa->mem = mem;
-        new_fa->size = size;
-
-        /* Insert NEW_FA in the free-list between PREV and FA. */
-        new_fa->next = fa;
-        if (prev)
-                prev->next = new_fa;
-        else
-                mb_sram_free_areas = new_fa;
-
- done:
-        spin_unlock_irqrestore (mb_sram_lock, flags);
-}
-
-
-/* Maintainence of CPU -> Mother-A DMA mappings.  */
-
-struct dma_mapping {
-        void *cpu_addr;
-        void *mb_sram_addr;
-        size_t size;
-        struct dma_mapping *next;
-};
-
-/* A list of mappings from CPU addresses to MB SRAM addresses for active
-   DMA blocks (that have been `granted' to the PCI device).  */
-static struct dma_mapping *active_dma_mappings = 0;
-
-/* A list of free mapping objects.  */
-static struct dma_mapping *free_dma_mappings = 0;
-
-/* Spinlock protecting the above globals.  */
-static DEFINE_SPINLOCK(dma_mappings_lock);
-
-static struct dma_mapping *new_dma_mapping (size_t size)
-{
-        unsigned long flags;
-        struct dma_mapping *mapping;
-        void *mb_sram_block = alloc_mb_sram (size);
-
-        if (! mb_sram_block)
-                return 0;
-
-        spin_lock_irqsave (dma_mappings_lock, flags);
-
-        if (! free_dma_mappings) {
-                /* We're out of mapping structures, make more.  */
-                void *mblock;
-                size_t mblock_size = sizeof (struct dma_mapping) * 8;
-
-                /* Don't hold the lock while calling kmalloc (I'm not
-                   sure whether it would be a problem, since we use
-                   GFP_ATOMIC, but it makes me nervous).  */
-                spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-                mblock = kmalloc (mblock_size, GFP_ATOMIC);
-                if (! mblock) {
-                        free_mb_sram (mb_sram_block, size);
-                        return 0;
-                }
-
-                /* Get the lock back.  */
-                spin_lock_irqsave (dma_mappings_lock, flags);
-
-                /* Add the new mapping structures to the free-list.  */
-                while (mblock_size > 0) {
-                        struct dma_mapping *fm = mblock;
-                        fm->next = free_dma_mappings;
-                        free_dma_mappings = fm;
-                        mblock += sizeof *fm;
-                        mblock_size -= sizeof *fm;
-                }
-        }
-
-        /* Get a mapping struct from the freelist.  */
-        mapping = free_dma_mappings;
-        free_dma_mappings = mapping->next;
-
-        /* Initialize the mapping.  Other fields should be filled in by
-           caller.  */
-        mapping->mb_sram_addr = mb_sram_block;
-        mapping->size = size;
-
-        /* Add it to the list of active mappings.  */
-        mapping->next = active_dma_mappings;
-        active_dma_mappings = mapping;
-
-        spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-        return mapping;
-}
-
-static struct dma_mapping *find_dma_mapping (void *mb_sram_addr)
-{
-        unsigned long flags;
-        struct dma_mapping *mapping;
-
-        spin_lock_irqsave (dma_mappings_lock, flags);
-
-        for (mapping = active_dma_mappings; mapping; mapping = mapping->next)
-                if (mapping->mb_sram_addr == mb_sram_addr) {
-                        spin_unlock_irqrestore (dma_mappings_lock, flags);
-                        return mapping;
-                }
-
-        panic ("find_dma_mapping: unmapped PCI DMA addr 0x%x",
-               MB_SRAM_TO_PCI (mb_sram_addr));
-}
-
-static struct dma_mapping *deactivate_dma_mapping (void *mb_sram_addr)
-{
-        unsigned long flags;
-        struct dma_mapping *mapping, *prev;
-
-        spin_lock_irqsave (dma_mappings_lock, flags);
-
-        for (prev = 0, mapping = active_dma_mappings;
-             mapping;
-             prev = mapping, mapping = mapping->next)
-        {
-                if (mapping->mb_sram_addr == mb_sram_addr) {
-                        /* This is the MAPPING; deactivate it.  */
-                        if (prev)
-                                prev->next = mapping->next;
-                        else
-                                active_dma_mappings = mapping->next;
-
-                        spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-                        return mapping;
-                }
-        }
-
-        panic ("deactivate_dma_mapping: unmapped PCI DMA addr 0x%x",
-               MB_SRAM_TO_PCI (mb_sram_addr));
-}
-
-/* Return MAPPING to the freelist.  */
-static inline void
-free_dma_mapping (struct dma_mapping *mapping)
-{
-        unsigned long flags;
-
-        free_mb_sram (mapping->mb_sram_addr, mapping->size);
-
-        spin_lock_irqsave (dma_mappings_lock, flags);
-
-        mapping->next = free_dma_mappings;
-        free_dma_mappings = mapping;
-
-        spin_unlock_irqrestore (dma_mappings_lock, flags);
-}
-
-
-/* Single PCI DMA mappings.  */
-
-/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA.  The
-   32-bit PCI bus mastering address to use is returned.  the device owns
-   this memory until either pci_unmap_single or pci_dma_sync_single is
-   performed.  */
-dma_addr_t
-pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir)
-{
-        struct dma_mapping *mapping = new_dma_mapping (size);
-
-        if (! mapping)
-                return 0;
-
-        mapping->cpu_addr = cpu_addr;
-
-        if (dir == PCI_DMA_BIDIRECTIONAL || dir == PCI_DMA_TODEVICE)
-                memcpy (mapping->mb_sram_addr, cpu_addr, size);
-
-        return MB_SRAM_TO_PCI (mapping->mb_sram_addr);
-}
-
-/* Return to the CPU the PCI DMA memory block previously `granted' to
-   PDEV, at DMA_ADDR.  */
-void pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-                       int dir)
-{
-        void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-        struct dma_mapping *mapping = deactivate_dma_mapping (mb_sram_addr);
-
-        if (size != mapping->size)
-                panic ("pci_unmap_single: size (%d) doesn't match"
-                       " size of mapping at PCI DMA addr 0x%x (%d)\n",
-                       size, dma_addr, mapping->size);
-
-        /* Copy back the DMA'd contents if necessary.  */
-        if (dir == PCI_DMA_BIDIRECTIONAL || dir == PCI_DMA_FROMDEVICE)
-                memcpy (mapping->cpu_addr, mb_sram_addr, size);
-
-        /* Return mapping to the freelist.  */
-        free_dma_mapping (mapping);
-}
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-void
-pci_dma_sync_single_for_cpu (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-                     int dir)
-{
-        void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-        struct dma_mapping *mapping = find_dma_mapping (mb_sram_addr);
-
-        /* Synchronize the DMA buffer with the CPU buffer if necessary.  */
-        if (dir == PCI_DMA_FROMDEVICE)
-                memcpy (mapping->cpu_addr, mb_sram_addr, size);
-        else if (dir == PCI_DMA_TODEVICE)
-                ; /* nothing to do */
-        else
-                panic("pci_dma_sync_single: unsupported sync dir: %d", dir);
-}
-
-void
-pci_dma_sync_single_for_device (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-                                int dir)
-{
-        void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-        struct dma_mapping *mapping = find_dma_mapping (mb_sram_addr);
-
-        /* Synchronize the DMA buffer with the CPU buffer if necessary.  */
-        if (dir == PCI_DMA_FROMDEVICE)
-                ; /* nothing to do */
-        else if (dir == PCI_DMA_TODEVICE)
-                memcpy (mb_sram_addr, mapping->cpu_addr, size);
-        else
-                panic("pci_dma_sync_single: unsupported sync dir: %d", dir);
-}
-
-
-/* Scatter-gather PCI DMA mappings.  */
-
-/* Do multiple DMA mappings at once.  */
-int
-pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir)
-{
-        BUG ();
-        return 0;
-}
-
-/* Unmap multiple DMA mappings at once.  */
-void
-pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,int dir)
-{
-        BUG ();
-}
-
-/* Make physical memory consistent for a set of streaming mode DMA
-   translations after a transfer.  The same as pci_dma_sync_single_* but
-   for a scatter-gather list, same rules and usage.  */
-
-void
-pci_dma_sync_sg_for_cpu (struct pci_dev *dev,
-                         struct scatterlist *sg, int sg_len,
-                         int dir)
-{
-        BUG ();
-}
-
-void
-pci_dma_sync_sg_for_device (struct pci_dev *dev,
-                            struct scatterlist *sg, int sg_len,
-                            int dir)
-{
-        BUG ();
-}
-
-
-/* PCI mem mapping.  */
-
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDR to the pci side dma address as well,
-   else DMA_ADDR is undefined.  */
-void *
-pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr)
-{
-        void *mb_sram_mem = alloc_mb_sram (size);
-        if (mb_sram_mem)
-                *dma_addr = MB_SRAM_TO_PCI (mb_sram_mem);
-        return mb_sram_mem;
-}
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must be
-   the same as what as passed into pci_alloc_consistent.  References to
-   the memory and mappings associated with CPU_ADDR or DMA_ADDR past
-   this call are illegal.  */
-void
-pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
-                     dma_addr_t dma_addr)
-{
-        void *mb_sram_mem = PCI_TO_MB_SRAM (dma_addr);
-        free_mb_sram (mb_sram_mem, size);
-}
-
-
-/* iomap/iomap */
-
-void __iomem *pci_iomap (struct pci_dev *dev, int bar, unsigned long max)
-{
-        resource_size_t start = pci_resource_start (dev, bar);
-        resource_size_t len = pci_resource_len (dev, bar);
-
-        if (!start || len == 0)
-                return 0;
-
-        /* None of the ioremap functions actually do anything, other than
-           re-casting their argument, so don't bother differentiating them.  */
-        return ioremap (start, len);
-}
-
-void pci_iounmap (struct pci_dev *dev, void __iomem *addr)
-{
-        /* nothing */
-}
-
-
-/* symbol exports (for modules) */
-
-EXPORT_SYMBOL (pci_map_single);
-EXPORT_SYMBOL (pci_unmap_single);
-EXPORT_SYMBOL (pci_alloc_consistent);
-EXPORT_SYMBOL (pci_free_consistent);
-EXPORT_SYMBOL (pci_dma_sync_single_for_cpu);
-EXPORT_SYMBOL (pci_dma_sync_single_for_device);
-EXPORT_SYMBOL (pci_iomap);
-EXPORT_SYMBOL (pci_iounmap);
diff --git a/arch/v850/kernel/rte_me2_cb.c b/arch/v850/kernel/rte_me2_cb.c
deleted file mode 100644
index 46803d48dffe..000000000000
--- a/arch/v850/kernel/rte_me2_cb.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * arch/v850/kernel/rte_me2_cb.c -- Midas labs RTE-V850E/ME2-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/me2.h>
-#include <asm/rte_me2_cb.h>
-#include <asm/machdep.h>
-#include <asm/v850e_intc.h>
-#include <asm/v850e_cache.h>
-#include <asm/irq.h>
-
-#include "mach.h"
-
-extern unsigned long *_intv_start;
-extern unsigned long *_intv_end;
-
-/* LED access routines.  */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-
-/* SDRAM are almost contiguous (with a small hole in between;
-   see mach_reserve_bootmem for details), so just use both as one big area.  */
-#define RAM_START       SDRAM_ADDR
-#define RAM_END         (SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-                                   unsigned long *ram_len)
-{
-        *ram_start = RAM_START;
-        *ram_len = RAM_END - RAM_START;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-        tv->tv_sec = 0;
-        tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_me2_cb_uart_pre_configure (unsigned chan,
-                                    unsigned cflags, unsigned baud)
-{
-        /* The RTE-V850E/ME2-CB connects some general-purpose I/O
-           pins on the CPU to the RTS/CTS lines of UARTB channel 0's
-           serial connection.
-           I/O pins P21 and P22 are RTS and CTS respectively.  */
-        if (chan == 0) {
-                /* Put P21 & P22 in I/O port mode.  */
-                ME2_PORT2_PMC &= ~0x6;
-                /* Make P21 and output, and P22 an input.  */
-                ME2_PORT2_PM = (ME2_PORT2_PM & ~0xC) | 0x4;
-        }
-
-        me2_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-        /* Initialize interrupts.  */
-        me2_init_irqs ();
-        rte_me2_cb_init_irqs ();
-}
-
-#ifdef CONFIG_ROM_KERNEL
-/* Initialization for kernel in ROM.  */
-static inline rom_kernel_init (void)
-{
-        /* If the kernel is in ROM, we have to copy any initialized data
-           from ROM into RAM.  */
-        extern unsigned long _data_load_start, _sdata, _edata;
-        register unsigned long *src = &_data_load_start;
-        register unsigned long *dst = &_sdata, *end = &_edata;
-
-        while (dst != end)
-                *dst++ = *src++;
-}
-#endif /* CONFIG_ROM_KERNEL */
-
-static void install_interrupt_vectors (void)
-{
-        unsigned long *p1, *p2;
-
-        ME2_IRAMM = 0x03; /* V850E/ME2 iRAM write mode */
-
-        /* vector copy to iRAM */
-        p1 = (unsigned long *)0; /* v85x vector start */
-        p2 = (unsigned long *)&_intv_start;
-        while (p2 < (unsigned long *)&_intv_end)
-                *p1++ = *p2++;
-
-        ME2_IRAMM = 0x00; /* V850E/ME2 iRAM read mode */
-}
-
-/* CompactFlash */
-
-static void cf_power_on (void)
-{
-        /* CF card detected? */
-        if (CB_CF_STS0 & 0x0030)
-                return;
-
-        CB_CF_REG0 = 0x0002; /* reest on */
-        mdelay (10);
-        CB_CF_REG0 = 0x0003; /* power on */
-        mdelay (10);
-        CB_CF_REG0 = 0x0001; /* reset off */
-        mdelay (10);
-}
-
-static void cf_power_off (void)
-{
-        CB_CF_REG0 = 0x0003; /* power on */
-        mdelay (10);
-        CB_CF_REG0 = 0x0002; /* reest on */
-        mdelay (10);
-}
-
-void __init mach_early_init (void)
-{
-        install_interrupt_vectors ();
-
-        /* CS1 SDRAM instruction cache enable */
-        v850e_cache_enable (0x04, 0x03, 0);
-
-        rte_cb_early_init ();
-
-        /* CompactFlash power on */
-        cf_power_on ();
-
-#if defined (CONFIG_ROM_KERNEL)
-        rom_kernel_init ();
-#endif
-}
-
-
-/* RTE-V850E/ME2-CB Programmable Interrupt Controller.  */
-
-static struct cb_pic_irq_init cb_pic_irq_inits[] = {
-        { "CB_EXTTM0",       IRQ_CB_EXTTM0,       1, 1, 6 },
-        { "CB_EXTSIO",       IRQ_CB_EXTSIO,       1, 1, 6 },
-        { "CB_TOVER",        IRQ_CB_TOVER,        1, 1, 6 },
-        { "CB_GINT0",        IRQ_CB_GINT0,        1, 1, 6 },
-        { "CB_USB",          IRQ_CB_USB,          1, 1, 6 },
-        { "CB_LANC",         IRQ_CB_LANC,         1, 1, 6 },
-        { "CB_USB_VBUS_ON",  IRQ_CB_USB_VBUS_ON,  1, 1, 6 },
-        { "CB_USB_VBUS_OFF", IRQ_CB_USB_VBUS_OFF, 1, 1, 6 },
-        { "CB_EXTTM1",       IRQ_CB_EXTTM1,       1, 1, 6 },
-        { "CB_EXTTM2",       IRQ_CB_EXTTM2,       1, 1, 6 },
-        { 0 }
-};
-#define NUM_CB_PIC_IRQ_INITS (ARRAY_SIZE(cb_pic_irq_inits) - 1)
-
-static struct hw_interrupt_type cb_pic_hw_itypes[NUM_CB_PIC_IRQ_INITS];
-static unsigned char cb_pic_active_irqs = 0;
-
-void __init rte_me2_cb_init_irqs (void)
-{
-        cb_pic_init_irq_types (cb_pic_irq_inits, cb_pic_hw_itypes);
-
-        /* Initalize on board PIC1 (not PIC0) enable */
-        CB_PIC_INT0M  = 0x0000;
-        CB_PIC_INT1M  = 0x0000;
-        CB_PIC_INTR   = 0x0000;
-        CB_PIC_INTEN |= CB_PIC_INT1EN;
-
-        ME2_PORT2_PMC    |= 0x08;       /* INTP23/SCK1 mode */
-        ME2_PORT2_PFC    &= ~0x08;      /* INTP23 mode */
-        ME2_INTR(2)      &= ~0x08;      /* INTP23 falling-edge detect */
-        ME2_INTF(2)      &= ~0x08;      /*   " */
-
-        rte_cb_init_irqs ();    /* gbus &c */
-}
-
-
-/* Enable interrupt handling for interrupt IRQ.  */
-void cb_pic_enable_irq (unsigned irq)
-{
-        CB_PIC_INT1M |= 1 << (irq - CB_PIC_BASE_IRQ);
-}
-
-void cb_pic_disable_irq (unsigned irq)
-{
-        CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-void cb_pic_shutdown_irq (unsigned irq)
-{
-        cb_pic_disable_irq (irq);
-
-        if (--cb_pic_active_irqs == 0)
-                free_irq (IRQ_CB_PIC, 0);
-
-        CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-static irqreturn_t cb_pic_handle_irq (int irq, void *dev_id,
-                                      struct pt_regs *regs)
-{
-        irqreturn_t rval = IRQ_NONE;
-        unsigned status = CB_PIC_INTR;
-        unsigned enable = CB_PIC_INT1M;
-
-        /* Only pay attention to enabled interrupts.  */
-        status &= enable;
-
-        CB_PIC_INTEN &= ~CB_PIC_INT1EN;
-
-        if (status) {
-                unsigned mask = 1;
-
-                irq = CB_PIC_BASE_IRQ;
-                do {
-                        /* There's an active interrupt, find out which one,
-                           and call its handler.  */
-                        while (! (status & mask)) {
-                                irq++;
-                                mask <<= 1;
-                        }
-                        status &= ~mask;
-
-                        CB_PIC_INTR = mask;
-
-                        /* Recursively call handle_irq to handle it. */
-                        handle_irq (irq, regs);
-                        rval = IRQ_HANDLED;
-                } while (status);
-        }
-
-        CB_PIC_INTEN |= CB_PIC_INT1EN;
-
-        return rval;
-}
-
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned cb_pic_startup_irq (unsigned irq)
-{
-        int rval;
-
-        if (cb_pic_active_irqs == 0) {
-                rval = request_irq (IRQ_CB_PIC, cb_pic_handle_irq,
-                                    IRQF_DISABLED, "cb_pic_handler", 0);
-                if (rval != 0)
-                        return rval;
-        }
-
-        cb_pic_active_irqs++;
-
-        cb_pic_enable_irq (irq);
-
-        return 0;
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
-                                   struct hw_interrupt_type *hw_irq_types)
-{
-        struct cb_pic_irq_init *init;
-        for (init = inits; init->name; init++) {
-                struct hw_interrupt_type *hwit = hw_irq_types++;
-
-                hwit->typename = init->name;
-
-                hwit->startup  = cb_pic_startup_irq;
-                hwit->shutdown = cb_pic_shutdown_irq;
-                hwit->enable   = cb_pic_enable_irq;
-                hwit->disable  = cb_pic_disable_irq;
-                hwit->ack      = irq_nop;
-                hwit->end      = irq_nop;
-
-                /* Initialize kernel IRQ infrastructure for this interrupt.  */
-                init_irq_handlers(init->base, init->num, init->interval, hwit);
-        }
-}
diff --git a/arch/v850/kernel/rte_me2_cb.ld b/arch/v850/kernel/rte_me2_cb.ld
deleted file mode 100644
index cf0766065ec6..000000000000
--- a/arch/v850/kernel/rte_me2_cb.ld
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/ME2-CB evaluation board
-   (CONFIG_RTE_CB_ME2), with kernel in SDRAM.  */
-
-MEMORY {
-        /* 128Kbyte of IRAM */
-        IRAM : ORIGIN = 0x00000000, LENGTH = 0x00020000
-
-        /* 32MB of SDRAM.  */
-        SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#define KRAM SDRAM
-
-SECTIONS {
-        .text : {
-                __kram_start = . ;
-                TEXT_CONTENTS
-                INTV_CONTENTS   /* copy to iRAM (0x0-0x620) */
-        } > KRAM
-
-        .data : {
-                DATA_CONTENTS
-                BSS_CONTENTS
-                RAMK_INIT_CONTENTS
-                __kram_end = . ;
-                BOOTMAP_CONTENTS
-        } > KRAM
-        
-        .root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb-multi.ld b/arch/v850/kernel/rte_nb85e_cb-multi.ld
deleted file mode 100644
index de347b4fffac..000000000000
--- a/arch/v850/kernel/rte_nb85e_cb-multi.ld
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Linker script for the Midas labs RTE-NB85E-CB evaluation board
-   (CONFIG_RTE_CB_NB85E), with the Multi debugger ROM monitor .  */
-
-MEMORY {
-        /* 1MB of SRAM; we can't use the last 96KB, because it's used by
-           the monitor scratch-RAM.  This memory is mirrored 4 times.  */
-        SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = (SRAM_SIZE - MON_SCRATCH_SIZE)
-        /* Monitor scratch RAM; only the interrupt vectors should go here.  */
-        MRAM  : ORIGIN = MON_SCRATCH_ADDR,  LENGTH = MON_SCRATCH_SIZE
-        /* 16MB of SDRAM.  */
-        SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_NB85E_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-        /* We can't use RAMK_KRAM_CONTENTS because that puts the whole
-           kernel in a single ELF segment, and the Multi debugger (which
-           we use to load the kernel) appears to have bizarre problems
-           dealing with it.  */
-
-        .text : {
-                __kram_start = . ;
-                TEXT_CONTENTS
-        } > KRAM
-
-        .data : {
-                DATA_CONTENTS
-                BSS_CONTENTS
-                RAMK_INIT_CONTENTS
-                __kram_end = . ;
-                BOOTMAP_CONTENTS
-
-                /* The address at which the interrupt vectors are initially
-                   loaded by the loader.  We can't load the interrupt vectors
-                   directly into their target location, because the monitor
-                   ROM for the GHS Multi debugger barfs if we try.
-                   Unfortunately, Multi also doesn't deal correctly with ELF
-                   sections where the LMA and VMA differ (it just ignores the
-                   LMA), so we can't use that feature to work around the
-                   problem!  What we do instead is just put the interrupt
-                   vectors into a normal section, and have the
-                   `mach_early_init' function for Midas boards do the
-                   necessary copying and relocation at runtime (this section
-                   basically only contains `jr' instructions, so it's not
-                   that hard).  */
-                . = ALIGN (0x10) ;
-                __intv_load_start = . ;
-                INTV_CONTENTS
-        } > KRAM
-
-        .root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb.c b/arch/v850/kernel/rte_nb85e_cb.c
deleted file mode 100644
index b4a045da5d70..000000000000
--- a/arch/v850/kernel/rte_nb85e_cb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/v850/kernel/rte_nb85e_cb.c -- Midas labs RTE-V850E/NB85E-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e.h>
-#include <asm/rte_nb85e_cb.h>
-
-#include "mach.h"
-
-void __init mach_early_init (void)
-{
-        /* Configure caching; some possible settings:
-
-             BHC = 0x0000, DCC = 0x0000  -- all caching disabled
-             BHC = 0x0040, DCC = 0x0000  -- SDRAM: icache only
-             BHC = 0x0080, DCC = 0x0C00  -- SDRAM: write-back dcache only
-             BHC = 0x00C0, DCC = 0x0C00  -- SDRAM: icache + write-back dcache
-             BHC = 0x00C0, DCC = 0x0800  -- SDRAM: icache + write-thru dcache
-
-           We can only cache SDRAM (we can't use cache SRAM because it's in
-           the same memory region as the on-chip RAM and I/O space).
-
-           Unfortunately, the dcache seems to be buggy, so we only use the
-           icache for now.  */
-        v850e_cache_enable (0x0040 /*BHC*/, 0x0003 /*ICC*/, 0x0000 /*DCC*/);
-
-        rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-                                   unsigned long *ram_len)
-{
-        /* We just use SDRAM here.  */
-        *ram_start = SDRAM_ADDR;
-        *ram_len = SDRAM_SIZE;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-        tv->tv_sec = 0;
-        tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_nb85e_cb_uart_pre_configure (unsigned chan,
-                                    unsigned cflags, unsigned baud)
-{
-        /* The RTE-NB85E-CB connects some general-purpose I/O pins on the
-           CPU to the RTS/CTS lines the UART's serial connection, as follows:
-           P00 = CTS (in), P01 = DSR (in), P02 = RTS (out), P03 = DTR (out). */
-
-        TEG_PORT0_PM = 0x03;    /* P00 and P01 inputs, P02 and P03 outputs */
-        TEG_PORT0_IO = 0x03;    /* Accept input */
-
-        /* Do pre-configuration for the actual UART.  */
-        teg_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-        teg_init_irqs ();
-        rte_cb_init_irqs ();
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb.ld b/arch/v850/kernel/rte_nb85e_cb.ld
deleted file mode 100644
index b672f484f085..000000000000
--- a/arch/v850/kernel/rte_nb85e_cb.ld
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Linker script for the Midas labs RTE-NB85E-CB evaluation board
-   (CONFIG_RTE_CB_NB85E).  */
-
-MEMORY {
-        LOW   : ORIGIN = 0x0,        LENGTH = 0x00100000
-        /* 1MB of SRAM  This memory is mirrored 4 times.  */
-        SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-        /* 16MB of SDRAM.  */
-        SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_NB85E_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-        .intv : { INTV_CONTENTS } > LOW
-        .sram : { RAMK_KRAM_CONTENTS } > KRAM
-        .root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/setup.c b/arch/v850/kernel/setup.c
deleted file mode 100644
index a0a8456a8430..000000000000
--- a/arch/v850/kernel/setup.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * arch/v850/kernel/setup.c -- Arch-dependent initialization functions
- *
- *  Copyright (C) 2001,02,03,05,06  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05,06  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/swap.h>         /* we don't have swap, but for nr_free_pages */
-#include <linux/irq.h>
-#include <linux/reboot.h>
-#include <linux/personality.h>
-#include <linux/major.h>
-#include <linux/root_dev.h>
-#include <linux/mtd/mtd.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include "mach.h"
-
-/* These symbols are all defined in the linker map to delineate various
-   statically allocated regions of memory.  */
-
-extern char _intv_start, _intv_end;
-/* `kram' is only used if the kernel uses part of normal user RAM.  */
-extern char _kram_start __attribute__ ((__weak__));
-extern char _kram_end __attribute__ ((__weak__));
-extern char _init_start, _init_end;
-extern char _bootmap;
-extern char _stext, _etext, _sdata, _edata, _sbss, _ebss;
-/* Many platforms use an embedded root image.  */
-extern char _root_fs_image_start __attribute__ ((__weak__));
-extern char _root_fs_image_end __attribute__ ((__weak__));
-
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-/* Memory not used by the kernel.  */
-static unsigned long total_ram_pages;
-
-/* System RAM.  */
-static unsigned long ram_start = 0, ram_len = 0;
-
-
-#define ADDR_TO_PAGE_UP(x)   ((((unsigned long)x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define ADDR_TO_PAGE(x)      (((unsigned long)x) >> PAGE_SHIFT)
-#define PAGE_TO_ADDR(x)      (((unsigned long)x) << PAGE_SHIFT)
-
-static void init_mem_alloc (unsigned long ram_start, unsigned long ram_len);
-
-void set_mem_root (void *addr, size_t len, char *cmd_line);
-
-
-void __init setup_arch (char **cmdline)
-{
-        /* Keep a copy of command line */
-        *cmdline = command_line;
-        memcpy (boot_command_line, command_line, COMMAND_LINE_SIZE);
-        boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
-        console_verbose ();
-
-        init_mm.start_code = (unsigned long) &_stext;
-        init_mm.end_code = (unsigned long) &_etext;
-        init_mm.end_data = (unsigned long) &_edata;
-        init_mm.brk = (unsigned long) &_kram_end;
-
-        /* Find out what mem this machine has.  */
-        mach_get_physical_ram (&ram_start, &ram_len);
-        /* ... and tell the kernel about it.  */
-        init_mem_alloc (ram_start, ram_len);
-
-        printk (KERN_INFO "CPU: %s\nPlatform: %s\n",
-                CPU_MODEL_LONG, PLATFORM_LONG);
-
-        /* do machine-specific setups.  */
-        mach_setup (cmdline);
-
-#ifdef CONFIG_MTD
-        if (!ROOT_DEV && &_root_fs_image_end > &_root_fs_image_start)
-                set_mem_root (&_root_fs_image_start,
-                              &_root_fs_image_end - &_root_fs_image_start,
-                              *cmdline);
-#endif
-}
-
-void __init trap_init (void)
-{
-}
-
-#ifdef CONFIG_MTD
-
-/* From drivers/mtd/devices/slram.c */
-#define SLRAM_BLK_SZ 0x4000
-
-/* Set the root filesystem to be the given memory region.
-   Some parameter may be appended to CMD_LINE.  */
-void set_mem_root (void *addr, size_t len, char *cmd_line)
-{
-        /* Some sort of idiocy in MTD means we must supply a length that's
-           a multiple of SLRAM_BLK_SZ.  We just round up the real length,
-           as the file system shouldn't attempt to access anything beyond
-           the end of the image anyway.  */
-        len = (((len - 1) + SLRAM_BLK_SZ) / SLRAM_BLK_SZ) * SLRAM_BLK_SZ;
-
-        /* The only way to pass info to the MTD slram driver is via
-           the command line.  */
-        if (*cmd_line) {
-                cmd_line += strlen (cmd_line);
-                *cmd_line++ = ' ';
-        }
-        sprintf (cmd_line, "slram=root,0x%x,+0x%x", (u32)addr, (u32)len);
-
-        ROOT_DEV = MKDEV (MTD_BLOCK_MAJOR, 0);
-}
-#endif
-
-
-static void irq_nop (unsigned irq) { }
-static unsigned irq_zero (unsigned irq) { return 0; }
-
-static void nmi_end (unsigned irq)
-{
-        if (irq != IRQ_NMI (0)) {
-                printk (KERN_CRIT "NMI %d is unrecoverable; restarting...",
-                        irq - IRQ_NMI (0));
-                machine_restart (0);
-        }
-}
-
-static struct hw_interrupt_type nmi_irq_type = {
-        .typename = "NMI",
-        .startup = irq_zero,            /* startup */
-        .shutdown = irq_nop,            /* shutdown */
-        .enable = irq_nop,              /* enable */
-        .disable = irq_nop,             /* disable */
-        .ack = irq_nop,         /* ack */
-        .end = nmi_end,         /* end */
-};
-
-void __init init_IRQ (void)
-{
-        init_irq_handlers (0, NUM_MACH_IRQS, 1, 0);
-        init_irq_handlers (IRQ_NMI (0), NUM_NMIS, 1, &nmi_irq_type);
-        mach_init_irqs ();
-}
-
-
-void __init mem_init (void)
-{
-        max_mapnr = MAP_NR (ram_start + ram_len);
-
-        num_physpages = ADDR_TO_PAGE (ram_len);
-
-        total_ram_pages = free_all_bootmem ();
-
-        printk (KERN_INFO
-                "Memory: %luK/%luK available"
-                " (%luK kernel code, %luK data)\n",
-                PAGE_TO_ADDR (nr_free_pages()) / 1024,
-                ram_len / 1024,
-                ((unsigned long)&_etext - (unsigned long)&_stext) / 1024,
-                ((unsigned long)&_ebss - (unsigned long)&_sdata) / 1024);
-}
-
-void free_initmem (void)
-{
-        unsigned long ram_end = ram_start + ram_len;
-        unsigned long start = PAGE_ALIGN ((unsigned long)(&_init_start));
-
-        if (start >= ram_start && start < ram_end) {
-                unsigned long addr;
-                unsigned long end = PAGE_ALIGN ((unsigned long)(&_init_end));
-
-                if (end > ram_end)
-                        end = ram_end;
-
-                printk("Freeing unused kernel memory: %ldK freed\n",
-                       (end - start) / 1024);
-
-                for (addr = start; addr < end; addr += PAGE_SIZE) {
-                        struct page *page = virt_to_page (addr);
-                        ClearPageReserved (page);
-                        init_page_count (page);
-                        __free_page (page);
-                        total_ram_pages++;
-                }
-        }
-}
-
-
-/* Initialize the `bootmem allocator'.  RAM_START and RAM_LEN identify
-   what RAM may be used.  */
-static void __init
-init_bootmem_alloc (unsigned long ram_start, unsigned long ram_len)
-{
-        /* The part of the kernel that's in the same managed RAM space
-           used for general allocation.  */
-        unsigned long kram_start = (unsigned long)&_kram_start;
-        unsigned long kram_end = (unsigned long)&_kram_end;
-        /* End of the managed RAM space.  */
-        unsigned long ram_end = ram_start + ram_len;
-        /* Address range of the interrupt vector table.  */
-        unsigned long intv_start = (unsigned long)&_intv_start;
-        unsigned long intv_end = (unsigned long)&_intv_end;
-        /* True if the interrupt vectors are in the managed RAM area.  */
-        int intv_in_ram = (intv_end > ram_start && intv_start < ram_end);
-        /* True if the interrupt vectors are inside the kernel's RAM.  */
-        int intv_in_kram = (intv_end > kram_start && intv_start < kram_end);
-        /* A pointer to an optional function that reserves platform-specific
-           memory regions.  We declare the pointer `volatile' to avoid gcc
-           turning the call into a static call (the problem is that since
-           it's a weak symbol, a static call may end up trying to reference
-           the location 0x0, which is not always reachable).  */
-        void (*volatile mrb) (void) = mach_reserve_bootmem;
-        /* The bootmem allocator's allocation bitmap.  */
-        unsigned long bootmap = (unsigned long)&_bootmap;
-        unsigned long bootmap_len;
-
-        /* Round bootmap location up to next page.  */
-        bootmap = PAGE_TO_ADDR (ADDR_TO_PAGE_UP (bootmap));
-
-        /* Initialize bootmem allocator.  */
-        bootmap_len = init_bootmem_node (NODE_DATA (0),
-                                         ADDR_TO_PAGE (bootmap),
-                                         ADDR_TO_PAGE (PAGE_OFFSET),
-                                         ADDR_TO_PAGE (ram_end));
-
-        /* Now make the RAM actually allocatable (it starts out `reserved'). */
-        free_bootmem (ram_start, ram_len);
-
-        if (kram_end > kram_start)
-                /* Reserve the RAM part of the kernel's address space, so it
-                   doesn't get allocated.  */
-                reserve_bootmem(kram_start, kram_end - kram_start,
-                                BOOTMEM_DEFAULT);
-        
-        if (intv_in_ram && !intv_in_kram)
-                /* Reserve the interrupt vector space.  */
-                reserve_bootmem(intv_start, intv_end - intv_start,
-                                BOOTMEM_DEFAULT);
-
-        if (bootmap >= ram_start && bootmap < ram_end)
-                /* Reserve the bootmap space.  */
-                reserve_bootmem(bootmap, bootmap_len,
-                                BOOTMEM_DEFAULT);
-
-        /* Reserve the memory used by the root filesystem image if it's
-           in RAM.  */
-        if (&_root_fs_image_end > &_root_fs_image_start
-            && (unsigned long)&_root_fs_image_start >= ram_start
-            && (unsigned long)&_root_fs_image_start < ram_end)
-                reserve_bootmem ((unsigned long)&_root_fs_image_start,
-                                 &_root_fs_image_end - &_root_fs_image_start,
-                                 BOOTMEM_DEFAULT);
-
-        /* Let the platform-dependent code reserve some too.  */
-        if (mrb)
-                (*mrb) ();
-}
-
-/* Tell the kernel about what RAM it may use for memory allocation.  */
-static void __init
-init_mem_alloc (unsigned long ram_start, unsigned long ram_len)
-{
-        unsigned i;
-        unsigned long zones_size[MAX_NR_ZONES];
-
-        init_bootmem_alloc (ram_start, ram_len);
-
-        for (i = 0; i < MAX_NR_ZONES; i++)
-                zones_size[i] = 0;
-
-        /* We stuff all the memory into one area, which includes the
-           initial gap from PAGE_OFFSET to ram_start.  */
-        zones_size[ZONE_DMA]
-                = ADDR_TO_PAGE (ram_len + (ram_start - PAGE_OFFSET));
-
-        /* The allocator is very picky about the address of the first
-           allocatable page -- it must be at least as aligned as the
-           maximum allocation -- so try to detect cases where it will get
-           confused and signal them at compile time (this is a common
-           problem when porting to a new platform with ).  There is a
-           similar runtime check in free_area_init_core.  */
-#if ((PAGE_OFFSET >> PAGE_SHIFT) & ((1UL << (MAX_ORDER - 1)) - 1))
-#error MAX_ORDER is too large for given PAGE_OFFSET (use CONFIG_FORCE_MAX_ZONEORDER to change it)
-#endif
-        NODE_DATA(0)->node_mem_map = NULL;
-        free_area_init_node (0, NODE_DATA(0), zones_size,
-                             ADDR_TO_PAGE (PAGE_OFFSET), 0);
-}
-
-
-
-/* Taken from m68knommu */
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-        total++;
-        if (PageReserved(mem_map+i))
-            reserved++;
-        else if (PageSwapCache(mem_map+i))
-            cached++;
-        else if (!page_count(mem_map+i))
-            free++;
-        else
-            shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
diff --git a/arch/v850/kernel/signal.c b/arch/v850/kernel/signal.c
deleted file mode 100644
index bf166e7e762c..000000000000
--- a/arch/v850/kernel/signal.c
+++ /dev/null
@@ -1,523 +0,0 @@
-/*
- * arch/v850/kernel/signal.c -- Signal handling
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1999,2000,2002  Niibe Yutaka & Kaz Kojima
- *  Copyright (C) 1991,1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * 1997-11-28  Modified for POSIX.1b signals by Richard Henderson
- *
- * This file was derived from the sh version, arch/sh/kernel/signal.c
- */
-
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/tty.h>
-
-#include <asm/ucontext.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/thread_info.h>
-#include <asm/cacheflush.h>
-
-#define DEBUG_SIG 0
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
-        sigset_t saveset;
-
-        mask &= _BLOCKABLE;
-        spin_lock_irq(&current->sighand->siglock);
-        saveset = current->blocked;
-        siginitset(&current->blocked, mask);
-        recalc_sigpending();
-        spin_unlock_irq(&current->sighand->siglock);
-
-        regs->gpr[GPR_RVAL] = -EINTR;
-        while (1) {
-                current->state = TASK_INTERRUPTIBLE;
-                schedule();
-                if (do_signal(regs, &saveset))
-                        return -EINTR;
-        }
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
-                  struct pt_regs *regs)
-{
-        sigset_t saveset, newset;
-
-        /* XXX: Don't preclude handling different sized sigset_t's.  */
-        if (sigsetsize != sizeof(sigset_t))
-                return -EINVAL;
-
-        if (copy_from_user(&newset, unewset, sizeof(newset)))
-                return -EFAULT;
-        sigdelsetmask(&newset, ~_BLOCKABLE);
-        spin_lock_irq(&current->sighand->siglock);
-        saveset = current->blocked;
-        current->blocked = newset;
-        recalc_sigpending();
-        spin_unlock_irq(&current->sighand->siglock);
-
-        regs->gpr[GPR_RVAL] = -EINTR;
-        while (1) {
-                current->state = TASK_INTERRUPTIBLE;
-                schedule();
-                if (do_signal(regs, &saveset))
-                        return -EINTR;
-        }
-}
-
-asmlinkage int 
-sys_sigaction(int sig, const struct old_sigaction *act,
-              struct old_sigaction *oact)
-{
-        struct k_sigaction new_ka, old_ka;
-        int ret;
-
-        if (act) {
-                old_sigset_t mask;
-                if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-                    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-                    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-                        return -EFAULT;
-                __get_user(new_ka.sa.sa_flags, &act->sa_flags);
-                __get_user(mask, &act->sa_mask);
-                siginitset(&new_ka.sa.sa_mask, mask);
-        }
-
-        ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-        if (!ret && oact) {
-                if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-                    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-                    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-                        return -EFAULT;
-                __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-                __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-        }
-
-        return ret;
-}
-
-asmlinkage int
-sys_sigaltstack(const stack_t *uss, stack_t *uoss,
-                struct pt_regs *regs)
-{
-        return do_sigaltstack(uss, uoss, regs->gpr[GPR_SP]);
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-struct sigframe
-{
-        struct sigcontext sc;
-        unsigned long extramask[_NSIG_WORDS-1];
-        unsigned long tramp[2]; /* signal trampoline */
-};
-
-struct rt_sigframe
-{
-        struct siginfo info;
-        struct ucontext uc;
-        unsigned long tramp[2]; /* signal trampoline */
-};
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
-{
-        unsigned int err = 0;
-
-#define COPY(x)         err |= __get_user(regs->x, &sc->regs.x)
-        COPY(gpr[0]);   COPY(gpr[1]);   COPY(gpr[2]);   COPY(gpr[3]);
-        COPY(gpr[4]);   COPY(gpr[5]);   COPY(gpr[6]);   COPY(gpr[7]);
-        COPY(gpr[8]);   COPY(gpr[9]);   COPY(gpr[10]);  COPY(gpr[11]);
-        COPY(gpr[12]);  COPY(gpr[13]);  COPY(gpr[14]);  COPY(gpr[15]);
-        COPY(gpr[16]);  COPY(gpr[17]);  COPY(gpr[18]);  COPY(gpr[19]);
-        COPY(gpr[20]);  COPY(gpr[21]);  COPY(gpr[22]);  COPY(gpr[23]);
-        COPY(gpr[24]);  COPY(gpr[25]);  COPY(gpr[26]);  COPY(gpr[27]);
-        COPY(gpr[28]);  COPY(gpr[29]);  COPY(gpr[30]);  COPY(gpr[31]);
-        COPY(pc);       COPY(psw);
-        COPY(ctpc);     COPY(ctpsw);    COPY(ctbp);
-#undef COPY
-
-        return err;
-}
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
-        struct sigframe *frame = (struct sigframe *)regs->gpr[GPR_SP];
-        sigset_t set;
-        int rval;
-
-        if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-                goto badframe;
-
-        if (__get_user(set.sig[0], &frame->sc.oldmask)
-            || (_NSIG_WORDS > 1
-                && __copy_from_user(&set.sig[1], &frame->extramask,
-                                    sizeof(frame->extramask))))
-                goto badframe;
-
-        sigdelsetmask(&set, ~_BLOCKABLE);
-        spin_lock_irq(&current->sighand->siglock);
-        current->blocked = set;
-        recalc_sigpending();
-        spin_unlock_irq(&current->sighand->siglock);
-
-        if (restore_sigcontext(regs, &frame->sc, &rval))
-                goto badframe;
-        return rval;
-
-badframe:
-        force_sig(SIGSEGV, current);
-        return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
-{
-        struct rt_sigframe *frame = (struct rt_sigframe *)regs->gpr[GPR_SP];
-        sigset_t set;
-        stack_t st;
-        int rval;
-
-        if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-                goto badframe;
-
-        if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-                goto badframe;
-
-        sigdelsetmask(&set, ~_BLOCKABLE);
-        spin_lock_irq(&current->sighand->siglock);
-        current->blocked = set;
-        recalc_sigpending();
-        spin_unlock_irq(&current->sighand->siglock);
-
-        if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
-                goto badframe;
-
-        if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
-                goto badframe;
-        /* It is more difficult to avoid calling this function than to
-           call it and ignore errors.  */
-        do_sigaltstack(&st, NULL, regs->gpr[GPR_SP]);
-
-        return rval;
-
-badframe:
-        force_sig(SIGSEGV, current);
-        return 0;
-}       
-
-/*
- * Set up a signal frame.
- */
-
-static int
-setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
-                 unsigned long mask)
-{
-        int err = 0;
-
-#define COPY(x)         err |= __put_user(regs->x, &sc->regs.x)
-        COPY(gpr[0]);   COPY(gpr[1]);   COPY(gpr[2]);   COPY(gpr[3]);
-        COPY(gpr[4]);   COPY(gpr[5]);   COPY(gpr[6]);   COPY(gpr[7]);
-        COPY(gpr[8]);   COPY(gpr[9]);   COPY(gpr[10]);  COPY(gpr[11]);
-        COPY(gpr[12]);  COPY(gpr[13]);  COPY(gpr[14]);  COPY(gpr[15]);
-        COPY(gpr[16]);  COPY(gpr[17]);  COPY(gpr[18]);  COPY(gpr[19]);
-        COPY(gpr[20]);  COPY(gpr[21]);  COPY(gpr[22]);  COPY(gpr[23]);
-        COPY(gpr[24]);  COPY(gpr[25]);  COPY(gpr[26]);  COPY(gpr[27]);
-        COPY(gpr[28]);  COPY(gpr[29]);  COPY(gpr[30]);  COPY(gpr[31]);
-        COPY(pc);       COPY(psw);
-        COPY(ctpc);     COPY(ctpsw);    COPY(ctbp);
-#undef COPY
-
-        err |= __put_user(mask, &sc->oldmask);
-
-        return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
-        /* Default to using normal stack */
-        unsigned long sp = regs->gpr[GPR_SP];
-
-        if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
-                sp = current->sas_ss_sp + current->sas_ss_size;
-
-        return (void *)((sp - frame_size) & -8UL);
-}
-
-static void setup_frame(int sig, struct k_sigaction *ka,
-                        sigset_t *set, struct pt_regs *regs)
-{
-        struct sigframe *frame;
-        int err = 0;
-        int signal;
-
-        frame = get_sigframe(ka, regs, sizeof(*frame));
-
-        if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-                goto give_sigsegv;
-
-        signal = current_thread_info()->exec_domain
-                && current_thread_info()->exec_domain->signal_invmap
-                && sig < 32
-                ? current_thread_info()->exec_domain->signal_invmap[sig]
-                : sig;
-
-        err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
-        if (_NSIG_WORDS > 1) {
-                err |= __copy_to_user(frame->extramask, &set->sig[1],
-                                      sizeof(frame->extramask));
-        }
-
-        /* Set up to return from userspace.  If provided, use a stub
-           already in userspace.  */
-        if (ka->sa.sa_flags & SA_RESTORER) {
-                regs->gpr[GPR_LP] = (unsigned long) ka->sa.sa_restorer;
-        } else {
-                /* Note, these encodings are _little endian_!  */
-
-                /* addi  __NR_sigreturn, r0, r12  */
-                err |= __put_user(0x6600 | (__NR_sigreturn << 16),
-                                  frame->tramp + 0);
-                /* trap 0 */
-                err |= __put_user(0x010007e0,
-                                  frame->tramp + 1);
-
-                regs->gpr[GPR_LP] = (unsigned long)frame->tramp;
-
-                flush_cache_sigtramp (regs->gpr[GPR_LP]);
-        }
-
-        if (err)
-                goto give_sigsegv;
-
-        /* Set up registers for signal handler.  */
-        regs->pc = (v850_reg_t) ka->sa.sa_handler;
-        regs->gpr[GPR_SP] = (v850_reg_t)frame;
-        /* Signal handler args:  */
-        regs->gpr[GPR_ARG0] = signal; /* arg 0: signum */
-        regs->gpr[GPR_ARG1] = (v850_reg_t)&frame->sc;/* arg 1: sigcontext */
-
-        set_fs(USER_DS);
-
-#if DEBUG_SIG
-        printk("SIG deliver (%s:%d): sp=%p pc=%08lx ra=%08lx\n",
-                current->comm, current->pid, frame, regs->pc, );
-#endif
-
-        return;
-
-give_sigsegv:
-        force_sigsegv(sig, current);
-}
-
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-                           sigset_t *set, struct pt_regs *regs)
-{
-        struct rt_sigframe *frame;
-        int err = 0;
-        int signal;
-
-        frame = get_sigframe(ka, regs, sizeof(*frame));
-
-        if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-                goto give_sigsegv;
-
-        signal = current_thread_info()->exec_domain
-                && current_thread_info()->exec_domain->signal_invmap
-                && sig < 32
-                ? current_thread_info()->exec_domain->signal_invmap[sig]
-                : sig;
-
-        err |= copy_siginfo_to_user(&frame->info, info);
-
-        /* Create the ucontext.  */
-        err |= __put_user(0, &frame->uc.uc_flags);
-        err |= __put_user(0, &frame->uc.uc_link);
-        err |= __put_user((void *)current->sas_ss_sp,
-                          &frame->uc.uc_stack.ss_sp);
-        err |= __put_user(sas_ss_flags(regs->gpr[GPR_SP]),
-                          &frame->uc.uc_stack.ss_flags);
-        err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-        err |= setup_sigcontext(&frame->uc.uc_mcontext,
-                                regs, set->sig[0]);
-        err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-        /* Set up to return from userspace.  If provided, use a stub
-           already in userspace.  */
-        if (ka->sa.sa_flags & SA_RESTORER) {
-                regs->gpr[GPR_LP] = (unsigned long) ka->sa.sa_restorer;
-        } else {
-                /* Note, these encodings are _little endian_!  */
-
-                /* addi  __NR_sigreturn, r0, r12  */
-                err |= __put_user(0x6600 | (__NR_sigreturn << 16),
-                                  frame->tramp + 0);
-                /* trap 0 */
-                err |= __put_user(0x010007e0,
-                                  frame->tramp + 1);
-
-                regs->gpr[GPR_LP] = (unsigned long)frame->tramp;
-
-                flush_cache_sigtramp (regs->gpr[GPR_LP]);
-        }
-
-        if (err)
-                goto give_sigsegv;
-
-        /* Set up registers for signal handler.  */
-        regs->pc = (v850_reg_t) ka->sa.sa_handler;
-        regs->gpr[GPR_SP] = (v850_reg_t)frame;
-        /* Signal handler args:  */
-        regs->gpr[GPR_ARG0] = signal; /* arg 0: signum */
-        regs->gpr[GPR_ARG1] = (v850_reg_t)&frame->info; /* arg 1: siginfo */
-        regs->gpr[GPR_ARG2] = (v850_reg_t)&frame->uc; /* arg 2: ucontext */
-
-        set_fs(USER_DS);
-
-#if DEBUG_SIG
-        printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
-                current->comm, current->pid, frame, regs->pc, regs->pr);
-#endif
-
-        return;
-
-give_sigsegv:
-        force_sigsegv(sig, current);
-}
-
-/*
- * OK, we're invoking a handler
- */     
-
-static void
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
-              sigset_t *oldset, struct pt_regs * regs)
-{
-        /* Are we from a system call? */
-        if (PT_REGS_SYSCALL (regs)) {
-                /* If so, check system call restarting.. */
-                switch (regs->gpr[GPR_RVAL]) {
-                case -ERESTART_RESTARTBLOCK:
-                        current_thread_info()->restart_block.fn =
-                                do_no_restart_syscall;
-                        /* fall through */
-                case -ERESTARTNOHAND:
-                        regs->gpr[GPR_RVAL] = -EINTR;
-                        break;
-
-                case -ERESTARTSYS:
-                        if (!(ka->sa.sa_flags & SA_RESTART)) {
-                                regs->gpr[GPR_RVAL] = -EINTR;
-                                break;
-                        }
-                        /* fallthrough */
-                case -ERESTARTNOINTR:
-                        regs->gpr[12] = PT_REGS_SYSCALL (regs);
-                        regs->pc -= 4; /* Size of `trap 0' insn.  */
-                }
-
-                PT_REGS_SET_SYSCALL (regs, 0);
-        }
-
-        /* Set up the stack frame */
-        if (ka->sa.sa_flags & SA_SIGINFO)
-                setup_rt_frame(sig, ka, info, oldset, regs);
-        else
-                setup_frame(sig, ka, oldset, regs);
-
-        spin_lock_irq(&current->sighand->siglock);
-        sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-        if (!(ka->sa.sa_flags & SA_NODEFER))
-                sigaddset(&current->blocked,sig);
-        recalc_sigpending();
-        spin_unlock_irq(&current->sighand->siglock);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
-{
-        siginfo_t info;
-        int signr;
-        struct k_sigaction ka;
-
-        /*
-         * We want the common case to go fast, which
-         * is why we may in certain cases get here from
-         * kernel mode. Just return without doing anything
-         * if so.
-         */
-        if (!user_mode(regs))
-                return 1;
-
-        if (!oldset)
-                oldset = &current->blocked;
-
-        signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-        if (signr > 0) {
-                /* Whee!  Actually deliver the signal.  */
-                handle_signal(signr, &info, &ka, oldset, regs);
-                return 1;
-        }
-
-        /* Did we come from a system call? */
-        if (PT_REGS_SYSCALL (regs)) {
-                int rval = (int)regs->gpr[GPR_RVAL];
-                /* Restart the system call - no handlers present */
-                if (rval == -ERESTARTNOHAND
-                    || rval == -ERESTARTSYS
-                    || rval == -ERESTARTNOINTR)
-                {
-                        regs->gpr[12] = PT_REGS_SYSCALL (regs);
-                        regs->pc -= 4; /* Size of `trap 0' insn.  */
-                }
-                else if (rval == -ERESTART_RESTARTBLOCK) {
-                        regs->gpr[12] = __NR_restart_syscall;
-                        regs->pc -= 4; /* Size of `trap 0' insn.  */
-                }
-        }
-        return 0;
-}
diff --git a/arch/v850/kernel/sim.c b/arch/v850/kernel/sim.c
deleted file mode 100644
index 467b4aa0acdd..000000000000
--- a/arch/v850/kernel/sim.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/v850/kernel/sim.c -- Machine-specific stuff for GDB v850e simulator
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/simsyscall.h>
-
-#include "mach.h"
-
-/* The name of a file containing the root filesystem.  */
-#define ROOT_FS "rootfs.image"
-
-extern void simcons_setup (void);
-extern void simcons_poll_ttys (void);
-extern void set_mem_root (void *addr, size_t len, char *cmd_line);
-
-static int read_file (const char *name,
-                      unsigned long *addr, unsigned long *len,
-                      const char **err);
-
-void __init mach_setup (char **cmdline)
-{
-        const char *err;
-        unsigned long root_dev_addr, root_dev_len;
-
-        simcons_setup ();
-
-        printk (KERN_INFO "Reading root filesystem: %s", ROOT_FS);
-
-        if (read_file (ROOT_FS, &root_dev_addr, &root_dev_len, &err)) {
-                printk (" (size %luK)\n", root_dev_len / 1024);
-                set_mem_root ((void *)root_dev_addr, (size_t)root_dev_len,
-                              *cmdline);
-        } else
-                printk ("...%s failed!\n", err);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-        *ram_start = RAM_ADDR;
-        *ram_len = RAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-        /* ...do magic timer initialization?...  */
-        mach_tick = simcons_poll_ttys;
-        setup_irq (0, timer_action);
-}
-
-
-static void irq_nop (unsigned irq) { }
-static unsigned irq_zero (unsigned irq) { return 0; }
-
-static struct hw_interrupt_type sim_irq_type = {
-        .typename = "IRQ",
-        .startup = irq_zero,            /* startup */
-        .shutdown = irq_nop,            /* shutdown */
-        .enable = irq_nop,              /* enable */
-        .disable = irq_nop,             /* disable */
-        .ack = irq_nop,         /* ack */
-        .end = irq_nop,         /* end */
-};
-
-void __init mach_init_irqs (void)
-{
-        init_irq_handlers (0, NUM_MACH_IRQS, 1, &sim_irq_type);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
-        long timeval[2], timezone[2];
-        int rval = V850_SIM_SYSCALL (gettimeofday, timeval, timezone);
-        if (rval == 0) {
-                tv->tv_sec = timeval[0];
-                tv->tv_nsec = timeval[1] * 1000;
-        }
-}
-
-void machine_restart (char *__unused)
-{
-        V850_SIM_SYSCALL (write, 1, "RESTART\n", 8);
-        V850_SIM_SYSCALL (exit, 0);
-}
-
-void machine_halt (void)
-{
-        V850_SIM_SYSCALL (write, 1, "HALT\n", 5);
-        V850_SIM_SYSCALL (exit, 0);
-}
-
-void machine_power_off (void)
-{
-        V850_SIM_SYSCALL (write, 1, "POWER OFF\n", 10);
-        V850_SIM_SYSCALL (exit, 0);
-}
-
-
-/* Load data from a file called NAME into ram.  The address and length
-   of the data image are returned in ADDR and LEN.  */
-static int __init
-read_file (const char *name,
-           unsigned long *addr, unsigned long *len,
-           const char **err)
-{
-        int rval, fd;
-        unsigned long cur, left;
-        /* Note this is not a normal stat buffer, it's an ad-hoc
-           structure defined by the simulator.  */
-        unsigned long stat_buf[10];
-
-        /* Stat the file to find out the length.  */
-        rval = V850_SIM_SYSCALL (stat, name, stat_buf);
-        if (rval < 0) {
-                if (err) *err = "stat";
-                return 0;
-        }
-        *len = stat_buf[4];
-
-        /* Open the file; `0' is O_RDONLY.  */
-        fd = V850_SIM_SYSCALL (open, name, 0);
-        if (fd < 0) {
-                if (err) *err = "open";
-                return 0;
-        }
-
-        *addr = (unsigned long)alloc_bootmem(*len);
-        if (! *addr) {
-                V850_SIM_SYSCALL (close, fd);
-                if (err) *err = "alloc_bootmem";
-                return 0;
-        }
-
-        cur = *addr;
-        left = *len;
-        while (left > 0) {
-                int chunk = V850_SIM_SYSCALL (read, fd, cur, left);
-                if (chunk <= 0)
-                        break;
-                cur += chunk;
-                left -= chunk;
-        }
-        V850_SIM_SYSCALL (close, fd);
-        if (left > 0) {
-                /* Some read failed.  */
-                free_bootmem (*addr, *len);
-                if (err) *err = "read";
-                return 0;
-        }
-
-        return 1;
-}
diff --git a/arch/v850/kernel/sim.ld b/arch/v850/kernel/sim.ld
deleted file mode 100644
index 101885f3c9f0..000000000000
--- a/arch/v850/kernel/sim.ld
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Linker script for the gdb v850e simulator (CONFIG_V850E_SIM).  */
-
-MEMORY {
-        /* Interrupt vectors.  */
-        INTV  : ORIGIN = 0x0, LENGTH = 0xe0
-        /* Main RAM.  */
-        RAM   : ORIGIN = RAM_ADDR, LENGTH = RAM_SIZE
-}
-
-SECTIONS {
-        .intv : { INTV_CONTENTS } > INTV
-        .ram : { RAMK_KRAM_CONTENTS } > RAM
-}
diff --git a/arch/v850/kernel/sim85e2.c b/arch/v850/kernel/sim85e2.c
deleted file mode 100644
index 566dde5e6070..000000000000
--- a/arch/v850/kernel/sim85e2.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/v850/kernel/sim85e2.c -- Machine-specific stuff for
- *      V850E2 RTL simulator
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-
-/* There are 4 possible areas we can use:
-
-     IRAM (1MB) is fast for instruction fetches, but slow for data
-     DRAM (1020KB) is fast for data, but slow for instructions
-     ERAM is cached, so should be fast for both insns and data
-     SDRAM is external DRAM, similar to ERAM
-*/
-
-#define INIT_MEMC_FOR_SDRAM
-#define USE_SDRAM_AREA
-#define KERNEL_IN_SDRAM_AREA
-
-#define DCACHE_MODE     V850E2_CACHE_BTSC_DCM_WT
-/*#define DCACHE_MODE   V850E2_CACHE_BTSC_DCM_WB_ALLOC*/
-
-#ifdef USE_SDRAM_AREA
-#define RAM_START       SDRAM_ADDR
-#define RAM_END         (SDRAM_ADDR + SDRAM_SIZE)
-#else
-/* When we use DRAM, we need to account for the fact that the end of it is
-   used for R0_RAM.  */
-#define RAM_START       DRAM_ADDR
-#define RAM_END         R0_RAM_ADDR
-#endif
-
-
-extern void memcons_setup (void);
-
-
-#ifdef KERNEL_IN_SDRAM_AREA
-#define EARLY_INIT_SECTION_ATTR __attribute__ ((section (".early.text")))
-#else
-#define EARLY_INIT_SECTION_ATTR __init
-#endif
-
-void EARLY_INIT_SECTION_ATTR mach_early_init (void)
-{
-        /* The sim85e2 simulator tracks `undefined' values, so to make
-           debugging easier, we begin by zeroing out all otherwise
-           undefined registers.  This is not strictly necessary.
-
-           The registers we zero are:
-               Every GPR except:
-                   stack-pointer (r3)
-                   task-pointer (r16)
-                   our return addr (r31)
-               Every system register (SPR) that we know about except for
-               the PSW (SPR 5), which we zero except for the
-               disable-interrupts bit.
-        */
-
-        /* GPRs */
-        asm volatile ("             mov r0, r1 ; mov r0, r2              ");
-        asm volatile ("mov r0, r4 ; mov r0, r5 ; mov r0, r6 ; mov r0, r7 ");
-        asm volatile ("mov r0, r8 ; mov r0, r9 ; mov r0, r10; mov r0, r11");
-        asm volatile ("mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15");
-        asm volatile ("             mov r0, r17; mov r0, r18; mov r0, r19");
-        asm volatile ("mov r0, r20; mov r0, r21; mov r0, r22; mov r0, r23");
-        asm volatile ("mov r0, r24; mov r0, r25; mov r0, r26; mov r0, r27");
-        asm volatile ("mov r0, r28; mov r0, r29; mov r0, r30");
-
-        /* SPRs */
-        asm volatile ("ldsr r0, 0;  ldsr r0, 1;  ldsr r0, 2;  ldsr r0, 3");
-        asm volatile ("ldsr r0, 4");
-        asm volatile ("addi 0x20, r0, r1; ldsr r1, 5"); /* PSW */
-        asm volatile ("ldsr r0, 16; ldsr r0, 17; ldsr r0, 18; ldsr r0, 19");
-        asm volatile ("ldsr r0, 20");
-
-
-#ifdef INIT_MEMC_FOR_SDRAM
-        /* Settings for SDRAM controller.  */
-        V850E2_VSWC   = 0x0042;
-        V850E2_BSC    = 0x9286;
-        V850E2_BCT(0) = 0xb000; /* was: 0 */
-        V850E2_BCT(1) = 0x000b;
-        V850E2_ASC    = 0;
-        V850E2_LBS    = 0xa9aa; /* was: 0xaaaa */
-        V850E2_LBC(0) = 0;
-        V850E2_LBC(1) = 0;      /* was: 0x3 */
-        V850E2_BCC    = 0;
-        V850E2_RFS(4) = 0x800a; /* was: 0xf109 */
-        V850E2_SCR(4) = 0x2091; /* was: 0x20a1 */
-        V850E2_RFS(3) = 0x800c;
-        V850E2_SCR(3) = 0x20a1;
-        V850E2_DWC(0) = 0;
-        V850E2_DWC(1) = 0;
-#endif
-
-#if 0
-#ifdef CONFIG_V850E2_SIM85E2S
-        /* Turn on the caches.  */
-        V850E2_CACHE_BTSC = V850E2_CACHE_BTSC_ICM | DCACHE_MODE;
-        V850E2_BHC  = 0x1010;
-#elif CONFIG_V850E2_SIM85E2C
-        V850E2_CACHE_BTSC |= (V850E2_CACHE_BTSC_ICM | V850E2_CACHE_BTSC_DCM0);
-        V850E2_BUSM_BHC = 0xFFFF;
-#endif
-#else
-        V850E2_BHC  = 0;
-#endif
-
-        /* Don't stop the simulator at `halt' instructions.  */
-        SIM85E2_NOTHAL = 1;
-
-        /* Ensure that the simulator halts on a panic, instead of going
-           into an infinite loop inside the panic function.  */
-        panic_timeout = -1;
-}
-
-void __init mach_setup (char **cmdline)
-{
-        memcons_setup ();
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-        *ram_start = RAM_START;
-        *ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-        /* The simulator actually cycles through all interrupts
-           periodically.  We just pay attention to IRQ0, which gives us
-           1/64 the rate of the periodic interrupts.  */
-        setup_irq (0, timer_action);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-        tv->tv_sec = 0;
-        tv->tv_nsec = 0;
-}
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
-        { "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
-        { 0 }
-};
-struct hw_interrupt_type hw_itypes[1];
-
-/* Initialize interrupts.  */
-void __init mach_init_irqs (void)
-{
-        v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
-        SIM85E2_SIMFIN = 0;     /* Halt immediately.  */
-        for (;;) {}
-}
-
-void machine_restart (char *__unused)
-{
-        machine_halt ();
-}
-
-void machine_power_off (void)
-{
-        machine_halt ();
-}
-
diff --git a/arch/v850/kernel/sim85e2.ld b/arch/v850/kernel/sim85e2.ld
deleted file mode 100644
index 7470fd2ffb5b..000000000000
--- a/arch/v850/kernel/sim85e2.ld
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Linker script for the sim85e2c simulator, which is a verilog simulation of
-   the V850E2 NA85E2C cpu core (CONFIG_V850E2_SIM85E2C).  */
-
-MEMORY {
-        /* 1MB of `instruction RAM', starting at 0.
-           Instruction fetches are much faster from IRAM than from DRAM.  */
-        IRAM : ORIGIN = IRAM_ADDR, LENGTH = IRAM_SIZE
-
-        /* 1MB of `data RAM', below and contiguous with the I/O space.
-           Data fetches are much faster from DRAM than from IRAM.  */
-        DRAM : ORIGIN = DRAM_ADDR, LENGTH = DRAM_SIZE
-
-        /* `external ram' (CS1 area), comes after IRAM.  */
-        ERAM : ORIGIN = ERAM_ADDR, LENGTH = ERAM_SIZE
-
-        /* Dynamic RAM; uses memory controller.  */
-        SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-        .iram : {
-                INTV_CONTENTS
-                *arch/v850/kernel/head.o
-                *(.early.text)
-        } > IRAM
-        .dram : {
-                _memcons_output = . ;
-                . = . + 0x8000 ;
-                _memcons_output_end = . ;
-        } > DRAM
-        .sdram : {
-                /* We stick console output into a buffer here.  */
-                RAMK_KRAM_CONTENTS
-                ROOT_FS_CONTENTS
-        } > SDRAM
-}
diff --git a/arch/v850/kernel/simcons.c b/arch/v850/kernel/simcons.c
deleted file mode 100644
index 9973596ae304..000000000000
--- a/arch/v850/kernel/simcons.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/v850/kernel/simcons.c -- Console I/O for GDB v850e simulator
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/tty_driver.h>
-#include <linux/init.h>
-
-#include <asm/poll.h>
-#include <asm/string.h>
-#include <asm/simsyscall.h>
-
-
-/*  Low-level console. */
-
-static void simcons_write (struct console *co, const char *buf, unsigned len)
-{
-        V850_SIM_SYSCALL (write, 1, buf, len);
-}
-
-static int simcons_read (struct console *co, char *buf, unsigned len)
-{
-        return V850_SIM_SYSCALL (read, 0, buf, len);
-}
-
-static struct tty_driver *tty_driver;
-static struct tty_driver *simcons_device (struct console *c, int *index)
-{
-        *index = c->index;
-        return tty_driver;
-}
-
-static struct console simcons =
-{
-    .name       = "simcons",
-    .write      = simcons_write,
-    .read       = simcons_read,
-    .device     = simcons_device,
-    .flags      = CON_PRINTBUFFER,
-    .index      = -1,
-};
-
-/* Higher level TTY interface.  */
-
-int simcons_tty_open (struct tty_struct *tty, struct file *filp)
-{
-        return 0;
-}
-
-int simcons_tty_write (struct tty_struct *tty,
-                       const unsigned char *buf, int count)
-{
-        return V850_SIM_SYSCALL (write, 1, buf, count);
-}
-
-int simcons_tty_write_room (struct tty_struct *tty)
-{
-        /* Completely arbitrary.  */
-        return 0x100000;
-}
-
-int simcons_tty_chars_in_buffer (struct tty_struct *tty)
-{
-        /* We have no buffer.  */
-        return 0;
-}
-
-static const struct tty_operations ops = {
-        .open = simcons_tty_open,
-        .write = simcons_tty_write,
-        .write_room = simcons_tty_write_room,
-        .chars_in_buffer = simcons_tty_chars_in_buffer,
-};
-
-int __init simcons_tty_init (void)
-{
-        struct tty_driver *driver = alloc_tty_driver(1);
-        int err;
-        if (!driver)
-                return -ENOMEM;
-        driver->name = "simcons";
-        driver->major = TTY_MAJOR;
-        driver->minor_start = 64;
-        driver->type = TTY_DRIVER_TYPE_SYSCONS;
-        driver->init_termios = tty_std_termios;
-        tty_set_operations(driver, &ops);
-        err = tty_register_driver(driver);
-        if (err) {
-                put_tty_driver(driver);
-                return err;
-        }
-        tty_driver = driver;
-        return 0;
-}
-/* We use `late_initcall' instead of just `__initcall' as a workaround for
-   the fact that (1) simcons_tty_init can't be called before tty_init,
-   (2) tty_init is called via `module_init', (3) if statically linked,
-   module_init == device_init, and (4) there's no ordering of init lists.
-   We can do this easily because simcons is always statically linked, but
-   other tty drivers that depend on tty_init and which must use
-   `module_init' to declare their init routines are likely to be broken.  */
-late_initcall(simcons_tty_init);
-
-/* Poll for input on the console, and if there's any, deliver it to the
-   tty driver.  */
-void simcons_poll_tty (struct tty_struct *tty)
-{
-        char buf[32];   /* Not the nicest way to do it but I need it correct first */
-        int flip = 0, send_break = 0;
-        struct pollfd pfd;
-        pfd.fd = 0;
-        pfd.events = POLLIN;
-
-        if (V850_SIM_SYSCALL (poll, &pfd, 1, 0) > 0) {
-                if (pfd.revents & POLLIN) {
-                        /* Real block hardware knows the transfer size before
-                           transfer so the new tty buffering doesn't try to handle
-                           this rather weird simulator specific case well */
-                        int rd = V850_SIM_SYSCALL (read, 0, buf, 32);
-                        if (rd > 0) {
-                                tty_insert_flip_string(tty, buf, rd);
-                                flip = 1;
-                        } else
-                                send_break = 1;
-                } else if (pfd.revents & POLLERR)
-                        send_break = 1;
-        }
-
-        if (send_break) {
-                tty_insert_flip_char (tty, 0, TTY_BREAK);               
-                flip = 1;
-        }
-
-        if (flip)
-                tty_schedule_flip (tty);
-}
-
-void simcons_poll_ttys (void)
-{
-        if (tty_driver && tty_driver->ttys[0])
-                simcons_poll_tty (tty_driver->ttys[0]);
-}
-
-void simcons_setup (void)
-{
-        V850_SIM_SYSCALL (make_raw, 0);
-        register_console (&simcons);
-        printk (KERN_INFO "Console: GDB V850E simulator stdio\n");
-}
diff --git a/arch/v850/kernel/syscalls.c b/arch/v850/kernel/syscalls.c
deleted file mode 100644
index 1a83daf8e24f..000000000000
--- a/arch/v850/kernel/syscalls.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * arch/v850/kernel/syscalls.c -- Various system-call definitions not
- *      defined in machine-independent code
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was derived the ppc version, arch/ppc/kernel/syscalls.c
- * ... which was derived from "arch/i386/kernel/sys_i386.c" by Gary Thomas;
- *     modified by Cort Dougan (cort@cs.nmt.edu)
- *     and Paul Mackerras (paulus@cs.anu.edu.au).
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/syscalls.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/mman.h>
-#include <linux/sys.h>
-#include <linux/ipc.h>
-#include <linux/utsname.h>
-#include <linux/file.h>
-
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-int
-sys_ipc (uint call, int first, int second, int third, void *ptr, long fifth)
-{
-        int version, ret;
-
-        version = call >> 16; /* hack for backward compatibility */
-        call &= 0xffff;
-
-        ret = -EINVAL;
-        switch (call) {
-        case SEMOP:
-                ret = sys_semop (first, (struct sembuf *)ptr, second);
-                break;
-        case SEMGET:
-                ret = sys_semget (first, second, third);
-                break;
-        case SEMCTL:
-        {
-                union semun fourth;
-
-                if (!ptr)
-                        break;
-                if ((ret = access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
-                    || (ret = get_user(fourth.__pad, (void **)ptr)))
-                        break;
-                ret = sys_semctl (first, second, third, fourth);
-                break;
-        }
-        case MSGSND:
-                ret = sys_msgsnd (first, (struct msgbuf *) ptr, second, third);
-                break;
-        case MSGRCV:
-                switch (version) {
-                case 0: {
-                        struct ipc_kludge tmp;
-
-                        if (!ptr)
-                                break;
-                        if ((ret = access_ok(VERIFY_READ, ptr, sizeof(tmp)) ? 0 : -EFAULT)
-                            || (ret = copy_from_user(&tmp,
-                                                (struct ipc_kludge *) ptr,
-                                                sizeof (tmp))))
-                                break;
-                        ret = sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp,
-                                          third);
-                        break;
-                        }
-                default:
-                        ret = sys_msgrcv (first, (struct msgbuf *) ptr,
-                                          second, fifth, third);
-                        break;
-                }
-                break;
-        case MSGGET:
-                ret = sys_msgget ((key_t) first, second);
-                break;
-        case MSGCTL:
-                ret = sys_msgctl (first, second, (struct msqid_ds *) ptr);
-                break;
-        case SHMAT:
-                switch (version) {
-                default: {
-                        ulong raddr;
-
-                        if ((ret = access_ok(VERIFY_WRITE, (ulong*) third,
-                                               sizeof(ulong)) ? 0 : -EFAULT))
-                                break;
-                        ret = do_shmat (first, (char *) ptr, second, &raddr);
-                        if (ret)
-                                break;
-                        ret = put_user (raddr, (ulong *) third);
-                        break;
-                        }
-                case 1: /* iBCS2 emulator entry point */
-                        if (!segment_eq(get_fs(), get_ds()))
-                                break;
-                        ret = do_shmat (first, (char *) ptr, second,
-                                         (ulong *) third);
-                        break;
-                }
-                break;
-        case SHMDT: 
-                ret = sys_shmdt ((char *)ptr);
-                break;
-        case SHMGET:
-                ret = sys_shmget (first, second, third);
-                break;
-        case SHMCTL:
-                ret = sys_shmctl (first, second, (struct shmid_ds *) ptr);
-                break;
-        }
-
-        return ret;
-}
-
-static inline unsigned long
-do_mmap2 (unsigned long addr, size_t len,
-         unsigned long prot, unsigned long flags,
-         unsigned long fd, unsigned long pgoff)
-{
-        struct file * file = NULL;
-        int ret = -EBADF;
-
-        flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-        if (! (flags & MAP_ANONYMOUS)) {
-                if (!(file = fget (fd)))
-                        goto out;
-        }
-        
-        down_write (&current->mm->mmap_sem);
-        ret = do_mmap_pgoff (file, addr, len, prot, flags, pgoff);
-        up_write (&current->mm->mmap_sem);
-        if (file)
-                fput (file);
-out:
-        return ret;
-}
-
-unsigned long sys_mmap2 (unsigned long addr, size_t len,
-                        unsigned long prot, unsigned long flags,
-                        unsigned long fd, unsigned long pgoff)
-{
-        return do_mmap2 (addr, len, prot, flags, fd, pgoff);
-}
-
-unsigned long sys_mmap (unsigned long addr, size_t len,
-                       unsigned long prot, unsigned long flags,
-                       unsigned long fd, off_t offset)
-{
-        int err = -EINVAL;
-
-        if (offset & ~PAGE_MASK)
-                goto out;
-
-        err = do_mmap2 (addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
-out:
-        return err;
-}
-
-/*
- * Do a system call from kernel instead of calling sys_execve so we
- * end up with proper pt_regs.
- */
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
-{
-        register char *__a __asm__ ("r6") = filename;
-        register void *__b __asm__ ("r7") = argv;
-        register void *__c __asm__ ("r8") = envp;
-        register unsigned long __syscall __asm__ ("r12") = __NR_execve;
-        register unsigned long __ret __asm__ ("r10");
-        __asm__ __volatile__ ("trap 0"
-                        : "=r" (__ret), "=r" (__syscall)
-                        : "1" (__syscall), "r" (__a), "r" (__b), "r" (__c)
-                        : "r1", "r5", "r11", "r13", "r14",
-                          "r15", "r16", "r17", "r18", "r19");
-        return __ret;
-}
diff --git a/arch/v850/kernel/teg.c b/arch/v850/kernel/teg.c
deleted file mode 100644
index 699248f92aae..000000000000
--- a/arch/v850/kernel/teg.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/v850/kernel/teg.c -- NB85E-TEG cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-        /* Select timer interrupt instead of external pin.  */
-        TEG_ISS |= 0x1;
-        /* Start hardware timer.  */
-        v850e_timer_d_configure (0, HZ);
-        /* Install timer interrupt handler.  */
-        setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-        { "IRQ", 0,             NUM_CPU_IRQS,   1, 7 },
-        { "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM, 1, 5 },
-        { "SER", IRQ_INTSER(0), IRQ_INTSER_NUM, 1, 3 },
-        { "SR",  IRQ_INTSR(0),  IRQ_INTSR_NUM,  1, 4 },
-        { "ST",  IRQ_INTST(0),  IRQ_INTST_NUM,  1, 5 },
-        { 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init teg_init_irqs (void)
-{
-        v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void teg_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-        /* Enable UART I/O pins instead of external interrupt pins, and
-           UART interrupts instead of external pin interrupts.  */
-        TEG_ISS |= 0x4E;
-}
diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c
deleted file mode 100644
index d810c93fe665..000000000000
--- a/arch/v850/kernel/time.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/arch/v850/kernel/time.c -- Arch-dependent timer functions
- *
- *  Copyright (C) 1991, 1992, 1995, 2001, 2002  Linus Torvalds
- *
- * This file contains the v850-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10   Updated NTP code according to technical memorandum Jan '96
- *              "A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-
-#include "mach.h"
-
-#define TICK_SIZE       (tick_nsec / 1000)
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static irqreturn_t timer_interrupt (int irq, void *dummy, struct pt_regs *regs)
-{
-#if 0
-        /* last time the cmos clock got updated */
-        static long last_rtc_update=0;
-#endif
-
-        /* may need to kick the hardware timer */
-        if (mach_tick)
-          mach_tick ();
-
-        do_timer (1);
-#ifndef CONFIG_SMP
-        update_process_times(user_mode(regs));
-#endif
-        profile_tick(CPU_PROFILING, regs);
-#if 0
-        /*
-         * If we have an externally synchronized Linux clock, then update
-         * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-         * called as close as possible to 500 ms before the new second starts.
-         */
-        if (ntp_synced() &&
-            xtime.tv_sec > last_rtc_update + 660 &&
-            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-            (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-          if (set_rtc_mmss (xtime.tv_sec) == 0)
-            last_rtc_update = xtime.tv_sec;
-          else
-            last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-        }
-#ifdef CONFIG_HEARTBEAT
-        /* use power LED as a heartbeat instead -- much more useful
-           for debugging -- based on the version for PReP by Cort */
-        /* acts like an actual heart beat -- ie thump-thump-pause... */
-        if (mach_heartbeat) {
-            static unsigned cnt = 0, period = 0, dist = 0;
-
-            if (cnt == 0 || cnt == dist)
-                mach_heartbeat ( 1 );
-            else if (cnt == 7 || cnt == dist+7)
-                mach_heartbeat ( 0 );
-
-            if (++cnt > period) {
-                cnt = 0;
-                /* The hyperbolic function below modifies the heartbeat period
-                 * length in dependency of the current (5min) load. It goes
-                 * through the points f(0)=126, f(1)=86, f(5)=51,
-                 * f(inf)->30. */
-                period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-                dist = period / 4;
-            }
-        }
-#endif /* CONFIG_HEARTBEAT */
-#endif /* 0 */
-
-        return IRQ_HANDLED;
-}
-
-static int timer_dev_id;
-static struct irqaction timer_irqaction = {
-        .handler = timer_interrupt,
-        .flags = IRQF_DISABLED,
-        .mask = CPU_MASK_NONE,
-        .name = "timer",
-        .dev_id = &timer_dev_id,
-};
-
-void time_init (void)
-{
-        mach_gettimeofday (&xtime);
-        mach_sched_init (&timer_irqaction);
-}
diff --git a/arch/v850/kernel/v850_ksyms.c b/arch/v850/kernel/v850_ksyms.c
deleted file mode 100644
index 8d386a5dbc4a..000000000000
--- a/arch/v850/kernel/v850_ksyms.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <linux/module.h>
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-
-#include <asm/pgalloc.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/checksum.h>
-#include <asm/current.h>
-
-
-extern void *trap_table;
-EXPORT_SYMBOL (trap_table);
-
-/* platform dependent support */
-EXPORT_SYMBOL (kernel_thread);
-EXPORT_SYMBOL (__bug);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL (csum_partial_copy_nocheck);
-EXPORT_SYMBOL (csum_partial_copy_from_user);
-EXPORT_SYMBOL (ip_compute_csum);
-EXPORT_SYMBOL (ip_fast_csum);
-
-/* string / mem functions */
-EXPORT_SYMBOL (memset);
-EXPORT_SYMBOL (memcpy);
-EXPORT_SYMBOL (memmove);
-
-/*
- * libgcc functions - functions that are used internally by the
- * compiler...  (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3 (void);
-extern void __ashrdi3 (void);
-extern void __lshrdi3 (void);
-extern void __muldi3 (void);
-extern void __negdi2 (void);
-
-EXPORT_SYMBOL (__ashldi3);
-EXPORT_SYMBOL (__ashrdi3);
-EXPORT_SYMBOL (__lshrdi3);
-EXPORT_SYMBOL (__muldi3);
-EXPORT_SYMBOL (__negdi2);
diff --git a/arch/v850/kernel/v850e2_cache.c b/arch/v850/kernel/v850e2_cache.c
deleted file mode 100644
index 4570312c689c..000000000000
--- a/arch/v850/kernel/v850e2_cache.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * arch/v850/kernel/v850e2_cache.c -- Cache control for V850E2 cache
- *      memories
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/mm.h>
-
-#include <asm/v850e2_cache.h>
-
-/* Cache operations we can do.  The encoding corresponds directly to the
-   value we need to write into the COPR register.  */
-enum cache_op {
-        OP_SYNC_IF_DIRTY           = V850E2_CACHE_COPR_CFC(0), /* 000 */
-        OP_SYNC_IF_VALID           = V850E2_CACHE_COPR_CFC(1), /* 001 */
-        OP_SYNC_IF_VALID_AND_CLEAR = V850E2_CACHE_COPR_CFC(3), /* 011 */
-        OP_WAY_CLEAR               = V850E2_CACHE_COPR_CFC(4), /* 100 */
-        OP_FILL                    = V850E2_CACHE_COPR_CFC(5), /* 101 */
-        OP_CLEAR                   = V850E2_CACHE_COPR_CFC(6), /* 110 */
-        OP_CREATE_DIRTY            = V850E2_CACHE_COPR_CFC(7)  /* 111 */
-};
-
-/* Which cache to use.  This encoding also corresponds directly to the
-   value we need to write into the COPR register. */
-enum cache {
-        ICACHE = 0,
-        DCACHE = V850E2_CACHE_COPR_LBSL
-};
-
-/* Returns ADDR rounded down to the beginning of its cache-line.  */
-#define CACHE_LINE_ADDR(addr)  \
-   ((addr) & ~(V850E2_CACHE_LINE_SIZE - 1))
-/* Returns END_ADDR rounded up to the `limit' of its cache-line.  */
-#define CACHE_LINE_END_ADDR(end_addr)  \
-   CACHE_LINE_ADDR(end_addr + (V850E2_CACHE_LINE_SIZE - 1))
-
-
-/* Low-level cache ops.  */
-
-/* Apply cache-op OP to all entries in CACHE.  */
-static inline void cache_op_all (enum cache_op op, enum cache cache)
-{
-        int cmd = op | cache | V850E2_CACHE_COPR_WSLE | V850E2_CACHE_COPR_STRT;
-
-        if (op != OP_WAY_CLEAR) {
-                /* The WAY_CLEAR operation does the whole way, but other
-                   ops take begin-index and count params; we just indicate
-                   the entire cache.  */
-                V850E2_CACHE_CADL = 0;
-                V850E2_CACHE_CADH = 0;
-                V850E2_CACHE_CCNT = V850E2_CACHE_WAY_SIZE - 1;
-        }
-
-        V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(0); /* way 0 */
-        V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(1); /* way 1 */
-        V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(2); /* way 2 */
-        V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(3); /* way 3 */
-}
-
-/* Apply cache-op OP to all entries in CACHE covering addresses ADDR
-   through ADDR+LEN.  */
-static inline void cache_op_range (enum cache_op op, u32 addr, u32 len,
-                                   enum cache cache)
-{
-        u32 start = CACHE_LINE_ADDR (addr);
-        u32 end = CACHE_LINE_END_ADDR (addr + len);
-        u32 num_lines = (end - start) >> V850E2_CACHE_LINE_SIZE_BITS;
-
-        V850E2_CACHE_CADL = start & 0xFFFF;
-        V850E2_CACHE_CADH = start >> 16;
-        V850E2_CACHE_CCNT = num_lines - 1;
-
-        V850E2_CACHE_COPR = op | cache | V850E2_CACHE_COPR_STRT;
-}
-
-
-/* High-level ops.  */
-
-static void cache_exec_after_store_all (void)
-{
-        cache_op_all (OP_SYNC_IF_DIRTY, DCACHE);
-        cache_op_all (OP_WAY_CLEAR, ICACHE);
-}
-
-static void cache_exec_after_store_range (u32 start, u32 len)
-{
-        cache_op_range (OP_SYNC_IF_DIRTY, start, len, DCACHE);
-        cache_op_range (OP_CLEAR, start, len, ICACHE);
-}
-
-
-/* Exported functions.  */
-
-void flush_icache (void)
-{
-        cache_exec_after_store_all ();
-}
-
-void flush_icache_range (unsigned long start, unsigned long end)
-{
-        cache_exec_after_store_range (start, end - start);
-}
-
-void flush_icache_page (struct vm_area_struct *vma, struct page *page)
-{
-        cache_exec_after_store_range (page_to_virt (page), PAGE_SIZE);
-}
-
-void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
-                              unsigned long addr, int len)
-{
-        cache_exec_after_store_range (addr, len);
-}
-
-void flush_cache_sigtramp (unsigned long addr)
-{
-        /* For the exact size, see signal.c, but 16 bytes should be enough.  */
-        cache_exec_after_store_range (addr, 16);
-}
diff --git a/arch/v850/kernel/v850e_cache.c b/arch/v850/kernel/v850e_cache.c
deleted file mode 100644
index ea3e51cfb259..000000000000
--- a/arch/v850/kernel/v850e_cache.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * arch/v850/kernel/v850e_cache.c -- Cache control for V850E cache memories
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This file implements cache control for the rather simple cache used on
-   some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2
-   CPU.  V850E2 processors have their own (better) cache
-   implementation.  */
-
-#include <asm/entry.h>
-#include <asm/cacheflush.h>
-#include <asm/v850e_cache.h>
-
-#define WAIT_UNTIL_CLEAR(value) while (value) {}
-
-/* Set caching params via the BHC and DCC registers.  */
-void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc)
-{
-        unsigned long *r0_ram = (unsigned long *)R0_RAM_ADDR;
-        register u16 bhc_val asm ("r6") = bhc;
-
-        /* Read the instruction cache control register (ICC) and confirm
-           that bits 0 and 1 (TCLR0, TCLR1) are all cleared.  */
-        WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-        V850E_CACHE_ICC = icc;
-
-#ifdef V850E_CACHE_DCC
-        /* Configure data-cache.  */
-        V850E_CACHE_DCC = dcc;
-#endif /* V850E_CACHE_DCC */
-
-        /* Configure caching for various memory regions by writing the BHC
-           register.  The documentation says that an instruction _cannot_
-           enable/disable caching for the memory region in which the
-           instruction itself exists; to work around this, we store
-           appropriate instructions into the on-chip RAM area (which is never
-           cached), and briefly jump there to do the work.  */
-#ifdef V850E_CACHE_WRITE_IBS
-        *r0_ram++       = 0xf0720760;   /* st.h r0, 0xfffff072[r0] */
-#endif
-        *r0_ram++       = 0xf06a3760;   /* st.h r6, 0xfffff06a[r0] */
-        *r0_ram         = 0x5640006b;   /* jmp [r11] */
-
-        asm ("mov hilo(1f), r11; jmp [%1]; 1:;"
-             :: "r" (bhc_val), "r" (R0_RAM_ADDR) : "r11");
-}
-
-static void clear_icache (void)
-{
-        /* 1. Read the instruction cache control register (ICC) and confirm
-              that bits 0 and 1 (TCLR0, TCLR1) are all cleared.  */
-        WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-
-        /* 2. Read the ICC register and confirm that bit 12 (LOCK0) is
-              cleared.  Bit 13 of the ICC register is always cleared.  */
-        WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x1000);
-
-        /* 3. Set the TCLR0 and TCLR1 bits of the ICC register as follows,
-              when clearing way 0 and way 1 at the same time:
-                (a) Set the TCLR0 and TCLR1 bits.
-                (b) Read the TCLR0 and TCLR1 bits to confirm that these bits
-                    are cleared.
-                (c) Perform (a) and (b) above again.  */
-        V850E_CACHE_ICC |= 0x3;
-        WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-
-#ifdef V850E_CACHE_REPEAT_ICC_WRITE
-        /* Do it again.  */
-        V850E_CACHE_ICC |= 0x3;
-        WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-#endif
-}
-
-#ifdef V850E_CACHE_DCC
-/* Flush or clear (or both) the data cache, depending on the value of FLAGS;
-   the procedure is the same for both, just the control bits used differ (and
-   both may be performed simultaneously).  */
-static void dcache_op (unsigned short flags)
-{
-        /* 1. Read the data cache control register (DCC) and confirm that bits
-              0, 1, 4, and 5 (DC00, DC01, DC04, DC05) are all cleared.  */
-        WAIT_UNTIL_CLEAR (V850E_CACHE_DCC & 0x33);
-
-        /* 2. Clear DCC register bit 12 (DC12), bit 13 (DC13), or both
-              depending on the way for which tags are to be cleared.  */
-        V850E_CACHE_DCC &= ~0xC000;
-
-        /* 3. Set DCC register bit 0 (DC00), bit 1 (DC01) or both depending on
-              the way for which tags are to be cleared.
-              ...
-              Set DCC register bit 4 (DC04), bit 5 (DC05), or both depending
-              on the way to be data flushed.  */
-        V850E_CACHE_DCC |= flags;
-
-        /* 4. Read DCC register bit DC00, DC01 [DC04, DC05], or both depending
-              on the way for which tags were cleared [flushed] and confirm
-              that that bit is cleared.  */
-        WAIT_UNTIL_CLEAR (V850E_CACHE_DCC & flags);
-}
-#endif /* V850E_CACHE_DCC */
-
-/* Flushes the contents of the dcache to memory.  */
-static inline void flush_dcache (void)
-{
-#ifdef V850E_CACHE_DCC
-        /* We only need to do something if in write-back mode.  */
-        if (V850E_CACHE_DCC & 0x0400)
-                dcache_op (0x30);
-#endif /* V850E_CACHE_DCC */
-}
-
-/* Flushes the contents of the dcache to memory, and then clears it.  */
-static inline void clear_dcache (void)
-{
-#ifdef V850E_CACHE_DCC
-        /* We only need to do something if the dcache is enabled.  */
-        if (V850E_CACHE_DCC & 0x0C00)
-                dcache_op (0x33);
-#endif /* V850E_CACHE_DCC */
-}
-
-/* Clears the dcache without flushing to memory first.  */
-static inline void clear_dcache_no_flush (void)
-{
-#ifdef V850E_CACHE_DCC
-        /* We only need to do something if the dcache is enabled.  */
-        if (V850E_CACHE_DCC & 0x0C00)
-                dcache_op (0x3);
-#endif /* V850E_CACHE_DCC */
-}
-
-static inline void cache_exec_after_store (void)
-{
-        flush_dcache ();
-        clear_icache ();
-}
-
-
-/* Exported functions.  */
-
-void flush_icache (void)
-{
-        cache_exec_after_store ();
-}
-
-void flush_icache_range (unsigned long start, unsigned long end)
-{
-        cache_exec_after_store ();
-}
-
-void flush_icache_page (struct vm_area_struct *vma, struct page *page)
-{
-        cache_exec_after_store ();
-}
-
-void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
-                              unsigned long adr, int len)
-{
-        cache_exec_after_store ();
-}
-
-void flush_cache_sigtramp (unsigned long addr)
-{
-        cache_exec_after_store ();
-}
diff --git a/arch/v850/kernel/v850e_intc.c b/arch/v850/kernel/v850e_intc.c
deleted file mode 100644
index 8d39a52ee6d1..000000000000
--- a/arch/v850/kernel/v850e_intc.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/v850/kernel/v850e_intc.c -- V850E interrupt controller (INTC)
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/v850e_intc.h>
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned v850e_intc_irq_startup (unsigned irq)
-{
-        v850e_intc_clear_pending_irq (irq);
-        v850e_intc_enable_irq (irq);
-        return 0;
-}
-
-static void v850e_intc_end_irq (unsigned irq)
-{
-        unsigned long psw, temp;
-
-        /* Clear the highest-level bit in the In-service priority register
-           (ISPR), to allow this interrupt (or another of the same or
-           lesser priority) to happen again.
-
-           The `reti' instruction normally does this automatically when the
-           PSW bits EP and NP are zero, but we can't always rely on reti
-           being used consistently to return after an interrupt (another
-           process can be scheduled, for instance, which can delay the
-           associated reti for a long time, or this process may be being
-           single-stepped, which uses the `dbret' instruction to return
-           from the kernel).
-
-           We also set the PSW EP bit, which prevents reti from also
-           trying to modify the ISPR itself.  */
-
-        /* Get PSW and disable interrupts.  */
-        asm volatile ("stsr psw, %0; di" : "=r" (psw));
-        /* We don't want to do anything for NMIs (they don't use the ISPR).  */
-        if (! (psw & 0xC0)) {
-                /* Transition to `trap' state, so that an eventual real
-                   reti instruction won't modify the ISPR.  */
-                psw |= 0x40;
-                /* Fake an interrupt return, which automatically clears the
-                   appropriate bit in the ISPR.  */
-                asm volatile ("mov hilo(1f), %0;"
-                              "ldsr %0, eipc; ldsr %1, eipsw;"
-                              "reti;"
-                              "1:"
-                              : "=&r" (temp) : "r" (psw));
-        }
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
-                                       struct hw_interrupt_type *hw_irq_types)
-{
-        struct v850e_intc_irq_init *init;
-        for (init = inits; init->name; init++) {
-                unsigned i;
-                struct hw_interrupt_type *hwit = hw_irq_types++;
-
-                hwit->typename = init->name;
-
-                hwit->startup  = v850e_intc_irq_startup;
-                hwit->shutdown = v850e_intc_disable_irq;
-                hwit->enable   = v850e_intc_enable_irq;
-                hwit->disable  = v850e_intc_disable_irq;
-                hwit->ack      = irq_nop;
-                hwit->end      = v850e_intc_end_irq;
-                
-                /* Initialize kernel IRQ infrastructure for this interrupt.  */
-                init_irq_handlers(init->base, init->num, init->interval, hwit);
-
-                /* Set the interrupt priorities.  */
-                for (i = 0; i < init->num; i++) {
-                        unsigned irq = init->base + i * init->interval;
-
-                        /* If the interrupt is currently enabled (all
-                           interrupts are initially disabled), then
-                           assume whoever enabled it has set things up
-                           properly, and avoid messing with it.  */
-                        if (! v850e_intc_irq_enabled (irq))
-                                /* This write also (1) disables the
-                                   interrupt, and (2) clears any pending
-                                   interrupts.  */
-                                V850E_INTC_IC (irq)
-                                        = (V850E_INTC_IC_PR (init->priority)
-                                           | V850E_INTC_IC_MK);
-                }
-        }
-}
diff --git a/arch/v850/kernel/v850e_timer_d.c b/arch/v850/kernel/v850e_timer_d.c
deleted file mode 100644
index d2a4ece2574c..000000000000
--- a/arch/v850/kernel/v850e_timer_d.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_d.c -- `Timer D' component often used
- *      with V850E CPUs
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-
-#include <asm/v850e_utils.h>
-#include <asm/v850e_timer_d.h>
-
-/* Start interval timer TIMER (0-3).  The timer will issue the
-   corresponding INTCMD interrupt RATE times per second.
-   This function does not enable the interrupt.  */
-void v850e_timer_d_configure (unsigned timer, unsigned rate)
-{
-        unsigned divlog2, count;
-
-        /* Calculate params for timer.  */
-        if (! calc_counter_params (
-                    V850E_TIMER_D_BASE_FREQ, rate,
-                    V850E_TIMER_D_TMCD_CS_MIN, V850E_TIMER_D_TMCD_CS_MAX, 16,
-                    &divlog2, &count))
-                printk (KERN_WARNING
-                        "Cannot find interval timer %d setting suitable"
-                        " for rate of %dHz.\n"
-                        "Using rate of %dHz instead.\n",
-                        timer, rate,
-                        (V850E_TIMER_D_BASE_FREQ >> divlog2) >> 16);
-
-        /* Do the actual hardware timer initialization:  */
-
-        /* Enable timer.  */
-        V850E_TIMER_D_TMCD(timer) = V850E_TIMER_D_TMCD_CAE;
-        /* Set clock divider.  */
-        V850E_TIMER_D_TMCD(timer)
-                = V850E_TIMER_D_TMCD_CAE
-                | V850E_TIMER_D_TMCD_CS(divlog2);
-        /* Set timer compare register.  */
-        V850E_TIMER_D_CMD(timer) = count;
-        /* Start counting.  */
-        V850E_TIMER_D_TMCD(timer)
-                = V850E_TIMER_D_TMCD_CAE
-                | V850E_TIMER_D_TMCD_CS(divlog2)
-                | V850E_TIMER_D_TMCD_CE;
-}
diff --git a/arch/v850/kernel/v850e_utils.c b/arch/v850/kernel/v850e_utils.c
deleted file mode 100644
index e6807ef8dee6..000000000000
--- a/arch/v850/kernel/v850e_utils.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/v850e_utils.h -- Utility functions associated with
- *      V850E CPUs
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/v850e_utils.h>
-
-/* Calculate counter clock-divider and count values to attain the
-   desired frequency RATE from the base frequency BASE_FREQ.  The
-   counter is expected to have a clock-divider, which can divide the
-   system cpu clock by a power of two value from MIN_DIVLOG2 to
-   MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter
-   counts up and resets whenever it's equal to the compare register,
-   generating an interrupt or whatever when it does so).  The returned
-   values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT
-   -- the counter compare value to use.  Returns true if it was possible
-   to find a reasonable value, otherwise false (and the other return
-   values will be set to be as good as possible).  */
-int calc_counter_params (unsigned long base_freq,
-                         unsigned long rate,
-                         unsigned min_divlog2, unsigned max_divlog2,
-                         unsigned counter_size,
-                         unsigned *divlog2, unsigned *count)
-{
-        unsigned _divlog2;
-        int ok = 0;
-
-        /* Find the lowest clock divider setting that can represent RATE.  */
-        for (_divlog2 = min_divlog2; _divlog2 <= max_divlog2; _divlog2++) {
-                /* Minimum interrupt rate possible using this divider.  */
-                unsigned min_int_rate
-                        = (base_freq >> _divlog2) >> counter_size;
-
-                if (min_int_rate <= rate) {
-                        /* This setting is the highest resolution
-                           setting that's slow enough enough to attain
-                           RATE interrupts per second, so use it.  */
-                        ok = 1;
-                        break;
-                }
-        }
-
-        if (_divlog2 > max_divlog2)
-                /* Can't find correct setting.  */
-                _divlog2 = max_divlog2;
-
-        if (divlog2)
-                *divlog2 = _divlog2;
-        if (count)
-                *count = ((base_freq >> _divlog2) + rate/2) / rate;
-
-        return ok;
-}
diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S
deleted file mode 100644
index d08cd1d27f27..000000000000
--- a/arch/v850/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * arch/v850/vmlinux.lds.S -- kernel linker script for v850 platforms
- *
- *  Copyright (C) 2002,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2002,03,04,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-
-#define VMLINUX_SYMBOL(_sym_) _##_sym_
-#include <asm-generic/vmlinux.lds.h>
-
-/* For most platforms, this will define useful things like RAM addr/size.  */
-#include <asm/machdep.h>
-
-
-/* The following macros contain the usual definitions for various data areas.
-   The prefix `RAMK_' is used to indicate macros suitable for kernels loaded
-   into RAM, and similarly `ROMK_' for ROM-resident kernels.  Note that all
-   symbols are prefixed with an extra `_' for compatibility with the v850
-   toolchain.  */
-
-        
-/* Interrupt vectors.  */
-#define INTV_CONTENTS                                                         \
-                . = ALIGN (0x10) ;                                            \
-                __intv_start = . ;                                            \
-                        *(.intv.reset)  /* Reset vector */                    \
-                . = __intv_start + 0x10 ;                                     \
-                        *(.intv.common) /* Vectors common to all v850e proc */\
-                . = __intv_start + 0x80 ;                                     \
-                        *(.intv.mach)   /* Machine-specific int. vectors.  */ \
-                __intv_end = . ;
-
-#define RODATA_CONTENTS                                                       \
-                . = ALIGN (16) ;                                              \
-                        *(.rodata) *(.rodata.*)                               \
-                        *(__vermagic)           /* Kernel version magic */    \
-                        *(.rodata1)                                           \
-                /* PCI quirks */                                              \
-                ___start_pci_fixups_early = . ;                               \
-                        *(.pci_fixup_early)                                   \
-                ___end_pci_fixups_early = . ;                                 \
-                ___start_pci_fixups_header = . ;                              \
-                        *(.pci_fixup_header)                                  \
-                ___end_pci_fixups_header = . ;                                \
-                ___start_pci_fixups_final = . ;                               \
-                        *(.pci_fixup_final)                                   \
-                ___end_pci_fixups_final = . ;                                 \
-                ___start_pci_fixups_enable = . ;                              \
-                        *(.pci_fixup_enable)                                  \
-                ___end_pci_fixups_enable = . ;                                \
-                /* Kernel symbol table: Normal symbols */                     \
-                ___start___ksymtab = .;                                       \
-                        *(__ksymtab)                                          \
-                ___stop___ksymtab = .;                                        \
-                /* Kernel symbol table: GPL-only symbols */                   \
-                ___start___ksymtab_gpl = .;                                   \
-                        *(__ksymtab_gpl)                                      \
-                ___stop___ksymtab_gpl = .;                                    \
-                /* Kernel symbol table: GPL-future symbols */                 \
-                ___start___ksymtab_gpl_future = .;                            \
-                        *(__ksymtab_gpl_future)                               \
-                ___stop___ksymtab_gpl_future = .;                             \
-                /* Kernel symbol table: strings */                            \
-                        *(__ksymtab_strings)                                  \
-                /* Kernel symbol table: Normal symbols */                     \
-                ___start___kcrctab = .;                                       \
-                        *(__kcrctab)                                          \
-                ___stop___kcrctab = .;                                        \
-                /* Kernel symbol table: GPL-only symbols */                   \
-                ___start___kcrctab_gpl = .;                                   \
-                        *(__kcrctab_gpl)                                      \
-                ___stop___kcrctab_gpl = .;                                    \
-                /* Kernel symbol table: GPL-future symbols */                 \
-                ___start___kcrctab_gpl_future = .;                            \
-                        *(__kcrctab_gpl_future)                               \
-                ___stop___kcrctab_gpl_future = .;                             \
-                /* Built-in module parameters */                              \
-                . = ALIGN (4) ;                                               \
-                ___start___param = .;                                         \
-                *(__param)                                                    \
-                ___stop___param = .;
-
-
-/* Kernel text segment, and some constant data areas.  */
-#define TEXT_CONTENTS                                                         \
-                _text = .;                                                    \
-                __stext = . ;                                                 \
-                TEXT_TEXT                                                     \
-                SCHED_TEXT                                                    \
-                        *(.exit.text)   /* 2.5 convention */                  \
-                        *(.text.exit)   /* 2.4 convention */                  \
-                        *(.text.lock)                                         \
-                        *(.exitcall.exit)                                     \
-                __real_etext = . ;      /* There may be data after here.  */  \
-                RODATA_CONTENTS                                               \
-                . = ALIGN (4) ;                                               \
-                        *(.call_table_data)                                   \
-                        *(.call_table_text)                                   \
-                . = ALIGN (16) ;        /* Exception table.  */               \
-                ___start___ex_table = . ;                                     \
-                        *(__ex_table)                                         \
-                ___stop___ex_table = . ;                                      \
-                . = ALIGN (4) ;                                               \
-                __etext = . ;
-
-/* Kernel data segment.  */
-#define DATA_CONTENTS                                                         \
-                __sdata = . ;                                                 \
-                DATA_DATA                                                     \
-                        EXIT_DATA       /* 2.5 convention */                  \
-                        *(.data.exit)   /* 2.4 convention */                  \
-                . = ALIGN (16) ;                                              \
-                *(.data.cacheline_aligned)                                    \
-                . = ALIGN (0x2000) ;                                          \
-                *(.data.init_task)                                            \
-                . = ALIGN (0x2000) ;                                          \
-                __edata = . ;
-
-/* Kernel BSS segment.  */
-#define BSS_CONTENTS                                                          \
-                __sbss = . ;                                                  \
-                        *(.bss)                                               \
-                        *(COMMON)                                             \
-                . = ALIGN (4) ;                                               \
-                __init_stack_end = . ;                                        \
-                __ebss = . ;
-
-/* `initcall' tables.  */
-#define INITCALL_CONTENTS                                                     \
-                . = ALIGN (16) ;                                              \
-                ___setup_start = . ;                                          \
-                        *(.init.setup)  /* 2.5 convention */                  \
-                        *(.setup.init)  /* 2.4 convention */                  \
-                ___setup_end = . ;                                            \
-                ___initcall_start = . ;                                       \
-                        *(.initcall.init)                                     \
-                        INITCALLS                                             \
-                . = ALIGN (4) ;                                               \
-                ___initcall_end = . ;                                         \
-                ___con_initcall_start = .;                                    \
-                        *(.con_initcall.init)                                 \
-                ___con_initcall_end = .;
-
-/* Contents of `init' section for a kernel that's loaded into RAM.  */
-#define RAMK_INIT_CONTENTS                                                    \
-                RAMK_INIT_CONTENTS_NO_END                                     \
-                __init_end = . ;
-/* Same as RAMK_INIT_CONTENTS, but doesn't define the `__init_end' symbol.  */
-#define RAMK_INIT_CONTENTS_NO_END                                             \
-                . = ALIGN (4096) ;                                            \
-                __init_start = . ;                                            \
-                        __sinittext = .;                                      \
-                        INIT_TEXT       /* 2.5 convention */                  \
-                        __einittext = .;                                      \
-                        INIT_DATA                                             \
-                        *(.text.init)   /* 2.4 convention */                  \
-                        *(.data.init)                                         \
-                INITCALL_CONTENTS                                             \
-                INITRAMFS_CONTENTS
-
-/* The contents of `init' section for a ROM-resident kernel which
-   should go into RAM.  */      
-#define ROMK_INIT_RAM_CONTENTS                                                \
-                . = ALIGN (4096) ;                                            \
-                __init_start = . ;                                            \
-                        INIT_DATA       /* 2.5 convention */                  \
-                        *(.data.init)   /* 2.4 convention */                  \
-                __init_end = . ;                                              \
-                . = ALIGN (4096) ;
-
-/* The contents of `init' section for a ROM-resident kernel which
-   should go into ROM.  */      
-#define ROMK_INIT_ROM_CONTENTS                                                \
-                        _sinittext = .;                                       \
-                        INIT_TEXT       /* 2.5 convention */                  \
-                        _einittext = .;                                       \
-                        *(.text.init)   /* 2.4 convention */                  \
-                INITCALL_CONTENTS                                             \
-                INITRAMFS_CONTENTS
-
-/* A root filesystem image, for kernels with an embedded root filesystem.  */
-#define ROOT_FS_CONTENTS                                                      \
-                __root_fs_image_start = . ;                                   \
-                *(.root)                                                      \
-                __root_fs_image_end = . ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-/* The initramfs archive.  */
-#define INITRAMFS_CONTENTS                                                    \
-                . = ALIGN (4) ;                                               \
-                ___initramfs_start = . ;                                      \
-                        *(.init.ramfs)                                        \
-                ___initramfs_end = . ;
-#endif
-
-/* Where the initial bootmap (bitmap for the boot-time memory allocator) 
-   should be place.  */
-#define BOOTMAP_CONTENTS                                                      \
-                . = ALIGN (4096) ;                                            \
-                __bootmap = . ;                                               \
-                . = . + 4096 ;          /* enough for 128MB.   */
-
-/* The contents of a `typical' kram area for a kernel in RAM.  */
-#define RAMK_KRAM_CONTENTS                                                    \
-                __kram_start = . ;                                            \
-                TEXT_CONTENTS                                                 \
-                DATA_CONTENTS                                                 \
-                BSS_CONTENTS                                                  \
-                RAMK_INIT_CONTENTS                                            \
-                __kram_end = . ;                                              \
-                BOOTMAP_CONTENTS
-
-
-/* Define output sections normally used for a ROM-resident kernel.  
-   ROM and RAM should be appropriate memory areas to use for kernel
-   ROM and RAM data.  This assumes that ROM starts at 0 (and thus can
-   hold the interrupt vectors).  */
-#define ROMK_SECTIONS(ROM, RAM)                                               \
-        .rom : {                                                              \
-                INTV_CONTENTS                                                 \
-                TEXT_CONTENTS                                                 \
-                ROMK_INIT_ROM_CONTENTS                                        \
-                ROOT_FS_CONTENTS                                              \
-        } > ROM                                                               \
-                                                                              \
-        __rom_copy_src_start = . ;                                            \
-                                                                              \
-        .data : {                                                             \
-                __kram_start = . ;                                            \
-                __rom_copy_dst_start = . ;                                    \
-                DATA_CONTENTS                                                 \
-                ROMK_INIT_RAM_CONTENTS                                        \
-                __rom_copy_dst_end = . ;                                      \
-        } > RAM  AT> ROM                                                      \
-                                                                              \
-        .bss ALIGN (4) : {                                                    \
-                BSS_CONTENTS                                                  \
-                __kram_end = . ;                                              \
-                BOOTMAP_CONTENTS                                              \
-        } > RAM
-
-
-/* The 32-bit variable `jiffies' is just the lower 32-bits of `jiffies_64'.  */
-_jiffies = _jiffies_64 ;
-
-
-/* Include an appropriate platform-dependent linker-script (which
-   usually should use the above macros to do most of the work).  */
-
-#ifdef CONFIG_V850E_SIM
-# include "sim.ld"
-#endif
-
-#ifdef CONFIG_V850E2_SIM85E2
-# include "sim85e2.ld"
-#endif
-
-#ifdef CONFIG_V850E2_FPGA85E2C
-# include "fpga85e2c.ld"
-#endif
-
-#ifdef CONFIG_V850E2_ANNA
-# ifdef CONFIG_ROM_KERNEL
-#  include "anna-rom.ld"
-# else
-#  include "anna.ld"
-# endif
-#endif
-
-#ifdef CONFIG_V850E_AS85EP1
-# ifdef CONFIG_ROM_KERNEL
-#  include "as85ep1-rom.ld"
-# else
-#  include "as85ep1.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_MA1
-# ifdef CONFIG_ROM_KERNEL
-#  include "rte_ma1_cb-rom.ld"
-# else
-#  include "rte_ma1_cb.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_NB85E
-# ifdef CONFIG_ROM_KERNEL
-#  include "rte_nb85e_cb-rom.ld"
-# elif defined(CONFIG_RTE_CB_MULTI)
-#  include "rte_nb85e_cb-multi.ld"
-# else
-#  include "rte_nb85e_cb.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_ME2
-#  include "rte_me2_cb.ld"
-#endif
-
diff --git a/arch/v850/lib/Makefile b/arch/v850/lib/Makefile
deleted file mode 100644
index 1c78b728a117..000000000000
--- a/arch/v850/lib/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# arch/v850/lib/Makefile
-#
-
-lib-y  = ashrdi3.o ashldi3.o lshrdi3.o muldi3.o negdi2.o \
-         checksum.o memcpy.o memset.o
diff --git a/arch/v850/lib/ashldi3.c b/arch/v850/lib/ashldi3.c
deleted file mode 100644
index 9e792d53f0e4..000000000000
--- a/arch/v850/lib/ashldi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* ashldi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef          int SItype     __attribute__ ((mode (SI)));
-typedef unsigned int USItype    __attribute__ ((mode (SI)));
-typedef          int DItype     __attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashldi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.low = 0;
-      w.s.high = (USItype)uu.s.low << -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.low >> bm;
-      w.s.low = (USItype)uu.s.low << b;
-      w.s.high = ((USItype)uu.s.high << b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/ashrdi3.c b/arch/v850/lib/ashrdi3.c
deleted file mode 100644
index 78efb65e315a..000000000000
--- a/arch/v850/lib/ashrdi3.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef          int SItype     __attribute__ ((mode (SI)));
-typedef unsigned int USItype    __attribute__ ((mode (SI)));
-typedef          int DItype     __attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      /* w.s.high = 1..1 or 0..0 */
-      w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
-      w.s.low = uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/checksum.c b/arch/v850/lib/checksum.c
deleted file mode 100644
index 042158dfe17a..000000000000
--- a/arch/v850/lib/checksum.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * INET         An implementation of the TCP/IP protocol suite for the LINUX
- *              operating system.  INET is implemented using the  BSD Socket
- *              interface as the means of communication with the user level.
- *
- *              MIPS specific IP/TCP/UDP checksumming routines
- *
- * Authors:     Ralf Baechle, <ralf@waldorf-gmbh.de>
- *              Lots of code moved from tcp.c and ip.c; see those files
- *              for more names.
- *
- *              This program is free software; you can redistribute it and/or
- *              modify it under the terms of the GNU General Public License
- *              as published by the Free Software Foundation; either version
- *              2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.1 2002/09/28 14:58:40 gerg Exp $
- */
-#include <net/checksum.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-static inline unsigned short from32to16 (unsigned long sum)
-{
-        unsigned int result;
-        /*
-                                %0              %1
-              hsw %1, %0        H     L         L     H
-              add %1, %0        H     L         H+L+C H+L
-        */
-        asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum));
-        return result >> 16;
-}
-
-static inline unsigned int do_csum(const unsigned char * buff, int len)
-{
-        int odd, count;
-        unsigned int result = 0;
-
-        if (len <= 0)
-                goto out;
-        odd = 1 & (unsigned long) buff;
-        if (odd) {
-                result = be16_to_cpu(*buff);
-                len--;
-                buff++;
-        }
-        count = len >> 1;               /* nr of 16-bit words.. */
-        if (count) {
-                if (2 & (unsigned long) buff) {
-                        result += *(unsigned short *) buff;
-                        count--;
-                        len -= 2;
-                        buff += 2;
-                }
-                count >>= 1;            /* nr of 32-bit words.. */
-                if (count) {
-                        unsigned int carry = 0;
-                        do {
-                                unsigned int w = *(unsigned int *) buff;
-                                count--;
-                                buff += 4;
-                                result += carry;
-                                result += w;
-                                carry = (w > result);
-                        } while (count);
-                        result += carry;
-                        result = (result & 0xffff) + (result >> 16);
-                }
-                if (len & 2) {
-                        result += *(unsigned short *) buff;
-                        buff += 2;
-                }
-        }
-        if (len & 1)
-                result += le16_to_cpu(*buff);
-        result = from32to16(result);
-        if (odd)
-                result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-        return result;
-}
-
-/*
- *      This is a version of ip_compute_csum() optimized for IP headers,
- *      which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-        return (__force __sum16)~do_csum(iph,ihl*4);
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-        return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-        unsigned int result = do_csum(buff, len);
-
-        /* add in old sum, and carry.. */
-        result += (__force u32)sum;
-        if ((__force u32)sum > result)
-                result += 1;
-        return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * copy while checksumming, otherwise like csum_partial
- */
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-                               int len, __wsum sum)
-{
-        /*
-         * It's 2:30 am and I don't feel like doing it real ...
-         * This is lots slower than the real thing (tm)
-         */
-        sum = csum_partial(src, len, sum);
-        memcpy(dst, src, len);
-
-        return sum;
-}
-
-/*
- * Copy from userspace and compute checksum.  If we catch an exception
- * then zero the rest of the buffer.
- */
-__wsum csum_partial_copy_from_user (const void *src,
-                                          void *dst,
-                                          int len, __wsum sum,
-                                          int *err_ptr)
-{
-        int missing;
-
-        missing = copy_from_user(dst, src, len);
-        if (missing) {
-                memset(dst + len - missing, 0, missing);
-                *err_ptr = -EFAULT;
-        }
-                
-        return csum_partial(dst, len, sum);
-}
diff --git a/arch/v850/lib/lshrdi3.c b/arch/v850/lib/lshrdi3.c
deleted file mode 100644
index 93b1cb6fdee8..000000000000
--- a/arch/v850/lib/lshrdi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef          int SItype     __attribute__ ((mode (SI)));
-typedef unsigned int USItype    __attribute__ ((mode (SI)));
-typedef          int DItype     __attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__lshrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.high = 0;
-      w.s.low = (USItype)uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = (USItype)uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/memcpy.c b/arch/v850/lib/memcpy.c
deleted file mode 100644
index 492847b3e612..000000000000
--- a/arch/v850/lib/memcpy.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/v850/lib/memcpy.c -- Memory copying
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-#include <asm/string.h>
-
-#define CHUNK_SIZE              32 /* bytes */
-#define CHUNK_ALIGNED(addr)     (((unsigned long)addr & 0x3) == 0)
-
-/* Note that this macro uses 8 call-clobbered registers (not including
-   R1), which are few enough so that the following functions don't need
-   to spill anything to memory.  It also uses R1, which is nominally
-   reserved for the assembler, but here it should be OK.  */
-#define COPY_CHUNK(src, dst)                    \
-   asm ("mov %0, ep;"                           \
-        "sld.w 0[ep], r1; sld.w 4[ep], r12;"    \
-        "sld.w 8[ep], r13; sld.w 12[ep], r14;"  \
-        "sld.w 16[ep], r15; sld.w 20[ep], r17;" \
-        "sld.w 24[ep], r18; sld.w 28[ep], r19;" \
-        "mov %1, ep;"                           \
-        "sst.w r1, 0[ep]; sst.w r12, 4[ep];"    \
-        "sst.w r13, 8[ep]; sst.w r14, 12[ep];"  \
-        "sst.w r15, 16[ep]; sst.w r17, 20[ep];" \
-        "sst.w r18, 24[ep]; sst.w r19, 28[ep]"  \
-        :: "r" (src), "r" (dst)                 \
-        : "r1", "r12", "r13", "r14", "r15",     \
-          "r17", "r18", "r19", "ep", "memory");
-
-void *memcpy (void *dst, const void *src, __kernel_size_t size)
-{
-        char *_dst = dst;
-        const char *_src = src;
-
-        if (size >= CHUNK_SIZE && CHUNK_ALIGNED(_src) && CHUNK_ALIGNED(_dst)) {
-                /* Copy large blocks efficiently.  */
-                unsigned count;
-                for (count = size / CHUNK_SIZE; count; count--) {
-                        COPY_CHUNK (_src, _dst);
-                        _src += CHUNK_SIZE;
-                        _dst += CHUNK_SIZE;
-                }
-                size %= CHUNK_SIZE;
-        }
-
-        if (size > 0)
-                do
-                        *_dst++ = *_src++;
-                while (--size);
-
-        return dst;
-}
-
-void *memmove (void *dst, const void *src, __kernel_size_t size)
-{
-        if ((unsigned long)dst < (unsigned long)src
-            || (unsigned long)src + size < (unsigned long)dst)
-                return memcpy (dst, src, size);
-        else {
-                char *_dst = dst + size;
-                const char *_src = src + size;
-
-                if (size >= CHUNK_SIZE
-                    && CHUNK_ALIGNED (_src) && CHUNK_ALIGNED (_dst))
-                {
-                        /* Copy large blocks efficiently.  */
-                        unsigned count;
-                        for (count = size / CHUNK_SIZE; count; count--) {
-                                _src -= CHUNK_SIZE;
-                                _dst -= CHUNK_SIZE;
-                                COPY_CHUNK (_src, _dst);
-                        }
-                        size %= CHUNK_SIZE;
-                }
-
-                if (size > 0)
-                        do
-                                *--_dst = *--_src;
-                        while (--size);
-
-                return _dst;
-        }
-}
diff --git a/arch/v850/lib/memset.c b/arch/v850/lib/memset.c
deleted file mode 100644
index d1b2ad821b15..000000000000
--- a/arch/v850/lib/memset.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/v850/lib/memset.c -- Memory initialization
- *
- *  Copyright (C) 2001,02,04  NEC Corporation
- *  Copyright (C) 2001,02,04  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-
-void *memset (void *dst, int val, __kernel_size_t count)
-{
-        if (count) {
-                register unsigned loop;
-                register void *ptr asm ("ep") = dst;
-
-                /* replicate VAL into a long.  */
-                val &= 0xff;
-                val |= val << 8;
-                val |= val << 16;
-
-                /* copy initial unaligned bytes.  */
-                if ((long)ptr & 1) {
-                        *(char *)ptr = val;
-                        ptr = (void *)((char *)ptr + 1);
-                        count--;
-                }
-                if (count > 2 && ((long)ptr & 2)) {
-                        *(short *)ptr = val;
-                        ptr = (void *)((short *)ptr + 1);
-                        count -= 2;
-                }
-
-                /* 32-byte copying loop.  */
-                for (loop = count / 32; loop; loop--) {
-                        asm ("sst.w %0, 0[ep]; sst.w %0, 4[ep];"
-                             "sst.w %0, 8[ep]; sst.w %0, 12[ep];"
-                             "sst.w %0, 16[ep]; sst.w %0, 20[ep];"
-                             "sst.w %0, 24[ep]; sst.w %0, 28[ep]"
-                             :: "r" (val) : "memory");
-                        ptr += 32;
-                }
-                count %= 32;
-
-                /* long copying loop.  */
-                for (loop = count / 4; loop; loop--) {
-                        *(long *)ptr = val;
-                        ptr = (void *)((long *)ptr + 1);
-                }
-                count %= 4;
-
-                /* finish up with any trailing bytes.  */
-                if (count & 2) {
-                        *(short *)ptr = val;
-                        ptr = (void *)((short *)ptr + 1);
-                }
-                if (count & 1) {
-                        *(char *)ptr = val;
-                }
-        }
-
-        return dst;
-}
diff --git a/arch/v850/lib/muldi3.c b/arch/v850/lib/muldi3.c
deleted file mode 100644
index 277ca25c82c8..000000000000
--- a/arch/v850/lib/muldi3.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and 
-                           gcc-2.7.2.3/longlong.h which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 2001 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define umul_ppmm(w1, w0, u, v) \
-  __asm__ ("mulu %3, %0, %1"                                            \
-           : "=r" ((USItype)(w0)),                                      \
-             "=r" ((USItype)(w1))                                       \
-           : "%0" ((USItype)(u)),                                       \
-             "r" ((USItype)(v)))
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;                                                        \
-    umul_ppmm (__w.s.high, __w.s.low, u, v);                            \
-    __w.ll; })
-
-typedef          int SItype     __attribute__ ((mode (SI)));
-typedef unsigned int USItype    __attribute__ ((mode (SI)));
-typedef          int DItype     __attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__muldi3 (DItype u, DItype v)
-{
-  DIunion w;
-  DIunion uu, vv;
-
-  uu.ll = u,
-  vv.ll = v;
-
-  w.ll = __umulsidi3 (uu.s.low, vv.s.low);
-  w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-               + (USItype) uu.s.high * (USItype) vv.s.low);
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/negdi2.c b/arch/v850/lib/negdi2.c
deleted file mode 100644
index 571e04fc619a..000000000000
--- a/arch/v850/lib/negdi2.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/v850/lib/negdi2.c -- 64-bit negation
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-typedef          int DItype     __attribute__ ((mode (DI)));
-
-DItype __negdi2 (DItype x)
-{
-        __asm__ __volatile__
-                ("not   r6, r10;"
-                 "add   1, r10;"
-                 "setf  c, r6;"
-                 "not   r7, r11;"
-                 "add   r6, r11"
-                 ::: "r6", "r7", "r10", "r11");
-}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 18a58ecfe684..3d0f2b6a5a16 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -21,13 +21,17 @@ config X86
         select HAVE_UNSTABLE_SCHED_CLOCK
         select HAVE_IDE
         select HAVE_OPROFILE
+        select HAVE_IOREMAP_PROT
+        select HAVE_GET_USER_PAGES_FAST
         select HAVE_KPROBES
+        select ARCH_WANT_OPTIONAL_GPIOLIB
         select HAVE_KRETPROBES
         select HAVE_DYNAMIC_FTRACE
         select HAVE_FTRACE
         select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
         select HAVE_ARCH_KGDB if !X86_VOYAGER
         select HAVE_GENERIC_DMA_COHERENT if X86_32
+        select HAVE_EFFICIENT_UNALIGNED_ACCESS
 
 config ARCH_DEFCONFIG
         string
@@ -330,20 +334,6 @@ config X86_BIGSMP
 
 endif
 
-config X86_RDC321X
-        bool "RDC R-321x SoC"
-        depends on X86_32
-        select M486
-        select X86_REBOOTFIXUPS
-        select GENERIC_GPIO
-        select LEDS_CLASS
-        select LEDS_GPIO
-        select NEW_LEDS
-        help
-          This option is needed for RDC R-321x system-on-chip, also known
-          as R-8610-(G).
-          If you don't have one of these chips, you should say N here.
-
 config X86_VSMP
         bool "Support for ScaleMP vSMP"
         select PARAVIRT
@@ -367,6 +357,16 @@ config X86_VISWS
           A kernel compiled for the Visual Workstation will run on general
           PCs as well. See <file:Documentation/sgi-visws.txt> for details.
 
+config X86_RDC321X
+        bool "RDC R-321x SoC"
+        depends on X86_32
+        select M486
+        select X86_REBOOTFIXUPS
+        help
+          This option is needed for RDC R-321x system-on-chip, also known
+          as R-8610-(G).
+          If you don't have one of these chips, you should say N here.
+
 config SCHED_NO_NO_OMIT_FRAME_POINTER
         def_bool y
         prompt "Single-depth WCHAN output"
@@ -448,7 +448,6 @@ config PARAVIRT_DEBUG
 
 config MEMTEST
         bool "Memtest"
-        depends on X86_64
         help
           This option adds a kernel parameter 'memtest', which allows memtest
           to be set.
@@ -1278,6 +1277,14 @@ config CRASH_DUMP
           (CONFIG_RELOCATABLE=y).
           For more details see Documentation/kdump/kdump.txt
 
+config KEXEC_JUMP
+        bool "kexec jump (EXPERIMENTAL)"
+        depends on EXPERIMENTAL
+        depends on KEXEC && HIBERNATION && X86_32
+        help
+          Jump between original kernel and kexeced kernel and invoke
+          code in physical address mode via KEXEC
+
 config PHYSICAL_START
         hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
         default "0x1000000" if X86_NUMAQ
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index abff1b84ed5b..2c518fbc52ec 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -362,10 +362,6 @@ config X86_ALIGNMENT_16
         def_bool y
         depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
 
-config X86_GOOD_APIC
-        def_bool y
-        depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
-
 config X86_INTEL_USERCOPY
         def_bool y
         depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
@@ -418,4 +414,4 @@ config X86_MINIMUM_CPU_FAMILY
 
 config X86_DEBUGCTLMSR
         def_bool y
-        depends on !(M586MMX || M586TSC || M586 || M486 || M386)
+        depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index ae36bfa814e5..092f019e033a 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -5,13 +5,15 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
-config NONPROMISC_DEVMEM
+config STRICT_DEVMEM
         bool "Filter access to /dev/mem"
         help
-          If this option is left off, you allow userspace access to all
+          If this option is disabled, you allow userspace (root) access to all
           of memory, including kernel and userspace memory. Accidental
           access to this is obviously disastrous, but specific access can
-          be used by people debugging the kernel.
+          be used by people debugging the kernel. Note that with PAT support
+          enabled, even in this case there are restrictions on /dev/mem
+          use due to the cache aliasing requirements.
 
           If this option is switched on, the /dev/mem file only allows
           userspace access to PCI space and the BIOS code and data regions.
@@ -287,7 +289,6 @@ config CPA_DEBUG
 
 config OPTIMIZE_INLINING
         bool "Allow gcc to uninline functions marked 'inline'"
-        depends on BROKEN
         help
           This option determines if the kernel forces gcc to inline the functions
           developers have marked 'inline'. Doing so takes away freedom from gcc to
@@ -298,5 +299,7 @@ config OPTIMIZE_INLINING
           become the default in the future, until then this option is there to
           test gcc for this.
 
+          If unsure, say N.
+
 endmenu
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 919ce21ea654..f5631da585b6 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -118,11 +118,6 @@ mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
 fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
 mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default/
 
-# RDC R-321x subarch support
-mflags-$(CONFIG_X86_RDC321X)    := -Iinclude/asm-x86/mach-rdc321x
-mcore-$(CONFIG_X86_RDC321X)     := arch/x86/mach-default/
-core-$(CONFIG_X86_RDC321X)      += arch/x86/mach-rdc321x/
-
 # default subarch .h files
 mflags-y += -Iinclude/asm-x86/mach-default
 
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index bc5553b496f7..9fea73706479 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -182,8 +182,6 @@ static unsigned		outcnt;
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 /*
  * This is set up by the setup-routine at boot-time
@@ -196,9 +194,6 @@ extern int input_len;
 
 static long bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
-
 static void *memset(void *s, int c, unsigned n);
 static void *memcpy(void *dest, const void *src, unsigned n);
 
@@ -220,40 +215,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-        void *p;
-
-        if (size < 0)
-                error("Malloc error");
-        if (free_mem_ptr <= 0)
-                error("Memory error");
-
-        free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
-        p = (void *)free_mem_ptr;
-        free_mem_ptr += size;
-
-        if (free_mem_ptr >= free_mem_end_ptr)
-                error("Out of memory");
-
-        return p;
-}
-
-static void free(void *where)
-{       /* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-        *ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-        free_mem_ptr = (memptr) *ptr;
-}
-
 static void scroll(void)
 {
         int i;
diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c
index 03399d64013b..d93cbc6464d0 100644
--- a/arch/x86/boot/edd.c
+++ b/arch/x86/boot/edd.c
@@ -167,9 +167,8 @@ void query_edd(void)
                  * Scan the BIOS-supported hard disks and query EDD
                  * information...
                  */
-                get_edd_info(devno, &ei);
-
-                if (boot_params.eddbuf_entries < EDDMAXNR) {
+                if (!get_edd_info(devno, &ei)
+                    && boot_params.eddbuf_entries < EDDMAXNR) {
                         memcpy(edp, &ei, sizeof ei);
                         edp++;
                         boot_params.eddbuf_entries++;
diff --git a/arch/x86/boot/pm.c b/arch/x86/boot/pm.c
index 328956fdb59e..85a1cd8a8ff8 100644
--- a/arch/x86/boot/pm.c
+++ b/arch/x86/boot/pm.c
@@ -98,12 +98,6 @@ static void reset_coprocessor(void)
 /*
  * Set up the GDT
  */
-#define GDT_ENTRY(flags, base, limit)           \
-        (((u64)(base & 0xff000000) << 32) |     \
-         ((u64)flags << 40) |                   \
-         ((u64)(limit & 0x00ff0000) << 32) |    \
-         ((u64)(base & 0x00ffffff) << 16) |     \
-         ((u64)(limit & 0x0000ffff)))
 
 struct gdt_ptr {
         u16 len;
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 9bc34e2033ec..4d73f53287b6 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -2047,7 +2047,7 @@ CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
 # CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_NONPROMISC_DEVMEM is not set
+# CONFIG_STRICT_DEVMEM is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index ae5124e064d4..a40452429625 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -2012,7 +2012,7 @@ CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
 # CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_NONPROMISC_DEVMEM is not set
+# CONFIG_STRICT_DEVMEM is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index 58cccb6483b0..a0e1dbe67dc1 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -441,12 +441,6 @@ beyond_if:
         regs->r8 = regs->r9 = regs->r10 = regs->r11 =
         regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0;
         set_fs(USER_DS);
-        if (unlikely(current->ptrace & PT_PTRACED)) {
-                if (current->ptrace & PT_TRACE_EXEC)
-                        ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-                else
-                        send_sig(SIGTRAP, current, 0);
-        }
         return 0;
 }
 
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index cb3856a18c85..20af4c79579a 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -36,6 +36,11 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+#define FIX_EFLAGS      (X86_EFLAGS_AC | X86_EFLAGS_OF | \
+                         X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
+                         X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
+                         X86_EFLAGS_CF)
+
 asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
 
@@ -248,7 +253,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
         regs->ss |= 3;
 
         err |= __get_user(tmpflags, &sc->flags);
-        regs->flags = (regs->flags & ~0x40DD5) | (tmpflags & 0x40DD5);
+        regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
         /* disable syscall checks */
         regs->orig_ax = -1;
 
@@ -515,7 +520,6 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
                         compat_sigset_t *set, struct pt_regs *regs)
 {
         struct rt_sigframe __user *frame;
-        struct exec_domain *ed = current_thread_info()->exec_domain;
         void __user *restorer;
         int err = 0;
 
@@ -538,8 +542,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
         if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
                 goto give_sigsegv;
 
-        err |= __put_user((ed && ed->signal_invmap && sig < 32
-                           ? ed->signal_invmap[sig] : sig), &frame->sig);
+        err |= __put_user(sig, &frame->sig);
         err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo);
         err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc);
         err |= copy_siginfo_to_user32(&frame->info, info);
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 20371d0635e4..ffc1bb4fed7d 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -15,6 +15,16 @@
 #include <asm/irqflags.h>
 #include <linux/linkage.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386         (EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE    0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysexit_audit int_ret_from_sys_call
+#define sysretl_audit int_ret_from_sys_call
+#endif
+
 #define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8)
 
         .macro IA32_ARG_FIXUP noebp=0
@@ -37,6 +47,11 @@
         movq    %rax,R8(%rsp)
         .endm
 
+        /*
+         * Reload arg registers from stack in case ptrace changed them.
+         * We don't reload %eax because syscall_trace_enter() returned
+         * the value it wants us to use in the table lookup.
+         */
         .macro LOAD_ARGS32 offset
         movl \offset(%rsp),%r11d
         movl \offset+8(%rsp),%r10d
@@ -46,7 +61,6 @@
         movl \offset+48(%rsp),%edx
         movl \offset+56(%rsp),%esi
         movl \offset+64(%rsp),%edi
-        movl \offset+72(%rsp),%eax
         .endm
         
         .macro CFI_STARTPROC32 simple
@@ -137,21 +151,22 @@ ENTRY(ia32_sysenter_target)
         .previous       
         GET_THREAD_INFO(%r10)
         orl    $TS_COMPAT,TI_status(%r10)
-        testl  $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-                 TI_flags(%r10)
+        testl  $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
         CFI_REMEMBER_STATE
         jnz  sysenter_tracesys
-sysenter_do_call:       
         cmpl    $(IA32_NR_syscalls-1),%eax
         ja      ia32_badsys
+sysenter_do_call:
         IA32_ARG_FIXUP 1
+sysenter_dispatch:
         call    *ia32_sys_call_table(,%rax,8)
         movq    %rax,RAX-ARGOFFSET(%rsp)
         GET_THREAD_INFO(%r10)
         DISABLE_INTERRUPTS(CLBR_NONE)
         TRACE_IRQS_OFF
         testl   $_TIF_ALLWORK_MASK,TI_flags(%r10)
-        jnz     int_ret_from_sys_call
+        jnz     sysexit_audit
+sysexit_from_sys_call:
         andl    $~TS_COMPAT,TI_status(%r10)
         /* clear IF, that popfq doesn't enable interrupts early */
         andl  $~0x200,EFLAGS-R11(%rsp) 
@@ -167,9 +182,63 @@ sysenter_do_call:
         TRACE_IRQS_ON
         ENABLE_INTERRUPTS_SYSEXIT32
 
-sysenter_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+        .macro auditsys_entry_common
+        movl %esi,%r9d                  /* 6th arg: 4th syscall arg */
+        movl %edx,%r8d                  /* 5th arg: 3rd syscall arg */
+        /* (already in %ecx)               4th arg: 2nd syscall arg */
+        movl %ebx,%edx                  /* 3rd arg: 1st syscall arg */
+        movl %eax,%esi                  /* 2nd arg: syscall number */
+        movl $AUDIT_ARCH_I386,%edi      /* 1st arg: audit arch */
+        call audit_syscall_entry
+        movl RAX-ARGOFFSET(%rsp),%eax   /* reload syscall number */
+        cmpl $(IA32_NR_syscalls-1),%eax
+        ja ia32_badsys
+        movl %ebx,%edi                  /* reload 1st syscall arg */
+        movl RCX-ARGOFFSET(%rsp),%esi   /* reload 2nd syscall arg */
+        movl RDX-ARGOFFSET(%rsp),%edx   /* reload 3rd syscall arg */
+        movl RSI-ARGOFFSET(%rsp),%ecx   /* reload 4th syscall arg */
+        movl RDI-ARGOFFSET(%rsp),%r8d   /* reload 5th syscall arg */
+        .endm
+
+        .macro auditsys_exit exit,ebpsave=RBP
+        testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+        jnz int_ret_from_sys_call
+        TRACE_IRQS_ON
+        sti
+        movl %eax,%esi          /* second arg, syscall return value */
+        cmpl $0,%eax            /* is it < 0? */
+        setl %al                /* 1 if so, 0 if not */
+        movzbl %al,%edi         /* zero-extend that into %edi */
+        inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+        call audit_syscall_exit
+        GET_THREAD_INFO(%r10)
+        movl RAX-ARGOFFSET(%rsp),%eax   /* reload syscall return value */
+        movl \ebpsave-ARGOFFSET(%rsp),%ebp /* reload user register value */
+        movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+        cli
+        TRACE_IRQS_OFF
+        testl %edi,TI_flags(%r10)
+        jnz int_with_check
+        jmp \exit
+        .endm
+
+sysenter_auditsys:
         CFI_RESTORE_STATE
+        auditsys_entry_common
+        movl %ebp,%r9d                  /* reload 6th syscall arg */
+        jmp sysenter_dispatch
+
+sysexit_audit:
+        auditsys_exit sysexit_from_sys_call
+#endif
+
+sysenter_tracesys:
         xchgl   %r9d,%ebp
+#ifdef CONFIG_AUDITSYSCALL
+        testl   $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+        jz      sysenter_auditsys
+#endif
         SAVE_REST
         CLEAR_RREGS
         movq    %r9,R9(%rsp)
@@ -242,21 +311,22 @@ ENTRY(ia32_cstar_target)
         .previous       
         GET_THREAD_INFO(%r10)
         orl   $TS_COMPAT,TI_status(%r10)
-        testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-                TI_flags(%r10)
+        testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
         CFI_REMEMBER_STATE
         jnz   cstar_tracesys
 cstar_do_call:  
         cmpl $IA32_NR_syscalls-1,%eax
         ja  ia32_badsys
         IA32_ARG_FIXUP 1
+cstar_dispatch:
         call *ia32_sys_call_table(,%rax,8)
         movq %rax,RAX-ARGOFFSET(%rsp)
         GET_THREAD_INFO(%r10)
         DISABLE_INTERRUPTS(CLBR_NONE)
         TRACE_IRQS_OFF
         testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
-        jnz  int_ret_from_sys_call
+        jnz sysretl_audit
+sysretl_from_sys_call:
         andl $~TS_COMPAT,TI_status(%r10)
         RESTORE_ARGS 1,-ARG_SKIP,1,1,1
         movl RIP-ARGOFFSET(%rsp),%ecx
@@ -268,8 +338,23 @@ cstar_do_call:
         CFI_RESTORE rsp
         USERGS_SYSRET32
         
-cstar_tracesys: 
+#ifdef CONFIG_AUDITSYSCALL
+cstar_auditsys:
         CFI_RESTORE_STATE
+        movl %r9d,R9-ARGOFFSET(%rsp)    /* register to be clobbered by call */
+        auditsys_entry_common
+        movl R9-ARGOFFSET(%rsp),%r9d    /* reload 6th syscall arg */
+        jmp cstar_dispatch
+
+sysretl_audit:
+        auditsys_exit sysretl_from_sys_call, RCX /* user %ebp in RCX slot */
+#endif
+
+cstar_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+        testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+        jz cstar_auditsys
+#endif
         xchgl %r9d,%ebp
         SAVE_REST
         CLEAR_RREGS
@@ -321,6 +406,7 @@ ENTRY(ia32_syscall)
         /*CFI_REL_OFFSET        rflags,EFLAGS-RIP*/
         /*CFI_REL_OFFSET        cs,CS-RIP*/
         CFI_REL_OFFSET  rip,RIP-RIP
+        PARAVIRT_ADJUST_EXCEPTION_FRAME
         SWAPGS
         /*
          * No need to follow this irqs on/off section: the syscall
@@ -336,8 +422,7 @@ ENTRY(ia32_syscall)
         SAVE_ARGS 0,0,1
         GET_THREAD_INFO(%r10)
         orl   $TS_COMPAT,TI_status(%r10)
-        testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-                TI_flags(%r10)
+        testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
         jnz ia32_tracesys
 ia32_do_syscall:        
         cmpl $(IA32_NR_syscalls-1),%eax
@@ -741,4 +826,10 @@ ia32_sys_call_table:
         .quad sys32_fallocate
         .quad compat_sys_timerfd_settime        /* 325 */
         .quad compat_sys_timerfd_gettime
+        .quad compat_sys_signalfd4
+        .quad sys_eventfd2
+        .quad sys_epoll_create1
+        .quad sys_dup3                  /* 330 */
+        .quad sys_pipe2
+        .quad sys_inotify_init1
 ia32_syscall_end:
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index f00afdf61e67..d3c64088b981 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -238,7 +238,7 @@ asmlinkage long sys32_pipe(int __user *fd)
         int retval;
         int fds[2];
 
-        retval = do_pipe(fds);
+        retval = do_pipe_flags(fds, 0);
         if (retval)
                 goto out;
         if (copy_to_user(fd, fds, sizeof(fds)))
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index da140611bb57..3db651fc8ec5 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -7,9 +7,10 @@ extra-y                := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinu
 CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 
 ifdef CONFIG_FTRACE
-# Do not profile debug utilities
+# Do not profile debug and lowlevel utilities
 CFLAGS_REMOVE_tsc.o = -pg
 CFLAGS_REMOVE_rtc.o = -pg
+CFLAGS_REMOVE_paravirt.o = -pg
 endif
 
 #
@@ -102,6 +103,7 @@ obj-$(CONFIG_OLPC)		+= olpc.o
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
         obj-y                           += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
+        obj-y                           += bios_uv.o
         obj-$(CONFIG_X86_PM_TIMER)      += pmtimer_64.o
         obj-$(CONFIG_AUDIT)             += audit_64.o
 
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index f489d7a9be92..fa88a1d71290 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1021,7 +1021,7 @@ void __init mp_config_acpi_legacy_irqs(void)
         mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
 #endif
         set_bit(MP_ISA_BUS, mp_bus_not_pci);
-        Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+        pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
 
 #ifdef CONFIG_X86_ES7000
         /*
@@ -1127,8 +1127,8 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
                 return gsi;
         }
         if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-                Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
-                        mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+                pr_debug(KERN_DEBUG "Pin %d-%d already programmed\n",
+                         mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
 #ifdef CONFIG_X86_32
                 return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
 #else
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index c2502eb9aa83..9220cf46aa10 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -73,6 +73,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
         struct cpuinfo_x86 *c = &cpu_data(cpu);
 
         cpumask_t saved_mask;
+        cpumask_of_cpu_ptr(new_mask, cpu);
         int retval;
         unsigned int eax, ebx, ecx, edx;
         unsigned int edx_part;
@@ -91,7 +92,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 
         /* Make sure we are running on right CPU */
         saved_mask = current->cpus_allowed;
-        retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+        retval = set_cpus_allowed_ptr(current, new_mask);
         if (retval)
                 return -1;
 
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 868de3d5c39d..fa2161d5003b 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -9,6 +9,7 @@
 #include <linux/bootmem.h>
 #include <linux/dmi.h>
 #include <linux/cpumask.h>
+#include <asm/segment.h>
 
 #include "realmode/wakeup.h"
 #include "sleep.h"
@@ -23,15 +24,6 @@ static unsigned long acpi_realmode;
 static char temp_stack[10240];
 #endif
 
-/* XXX: this macro should move to asm-x86/segment.h and be shared with the
-   boot code... */
-#define GDT_ENTRY(flags, base, limit)           \
-        (((u64)(base & 0xff000000) << 32) |     \
-         ((u64)flags << 40) |                   \
-         ((u64)(limit & 0x00ff0000) << 32) |    \
-         ((u64)(base & 0x00ffffff) << 16) |     \
-         ((u64)(limit & 0x0000ffff)))
-
 /**
  * acpi_save_state_mem - save kernel state
  *
@@ -158,6 +150,10 @@ static int __init acpi_sleep_setup(char *str)
                         acpi_realmode_flags |= 2;
                 if (strncmp(str, "s3_beep", 7) == 0)
                         acpi_realmode_flags |= 4;
+#ifdef CONFIG_HIBERNATION
+                if (strncmp(str, "s4_nohwsig", 10) == 0)
+                        acpi_no_s4_hw_signature();
+#endif
                 if (strncmp(str, "old_ordering", 12) == 0)
                         acpi_old_suspend_ordering();
                 str = strchr(str, ',');
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index f2766d84c7a0..74697408576f 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -23,7 +23,7 @@
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
 #include <asm/proto.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
 
@@ -32,21 +32,37 @@
 #define to_pages(addr, size) \
          (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
 
+#define EXIT_LOOP_COUNT 10000000
+
 static DEFINE_RWLOCK(amd_iommu_devtable_lock);
 
-struct command {
+/*
+ * general struct to manage commands send to an IOMMU
+ */
+struct iommu_cmd {
         u32 data[4];
 };
 
 static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
                              struct unity_map_entry *e);
 
+/* returns !0 if the IOMMU is caching non-present entries in its TLB */
 static int iommu_has_npcache(struct amd_iommu *iommu)
 {
         return iommu->cap & IOMMU_CAP_NPCACHE;
 }
 
-static int __iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
+/****************************************************************************
+ *
+ * IOMMU command queuing functions
+ *
+ ****************************************************************************/
+
+/*
+ * Writes the command to the IOMMUs command buffer and informs the
+ * hardware about the new command. Must be called with iommu->lock held.
+ */
+static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 {
         u32 tail, head;
         u8 *target;
@@ -63,7 +79,11 @@ static int __iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
         return 0;
 }
 
-static int iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
+/*
+ * General queuing function for commands. Takes iommu->lock and calls
+ * __iommu_queue_command().
+ */
+static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 {
         unsigned long flags;
         int ret;
@@ -75,16 +95,24 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
         return ret;
 }
 
+/*
+ * This function is called whenever we need to ensure that the IOMMU has
+ * completed execution of all commands we sent. It sends a
+ * COMPLETION_WAIT command and waits for it to finish. The IOMMU informs
+ * us about that by writing a value to a physical address we pass with
+ * the command.
+ */
 static int iommu_completion_wait(struct amd_iommu *iommu)
 {
         int ret;
-        struct command cmd;
+        struct iommu_cmd cmd;
         volatile u64 ready = 0;
         unsigned long ready_phys = virt_to_phys(&ready);
+        unsigned long i = 0;
 
         memset(&cmd, 0, sizeof(cmd));
         cmd.data[0] = LOW_U32(ready_phys) | CMD_COMPL_WAIT_STORE_MASK;
-        cmd.data[1] = HIGH_U32(ready_phys);
+        cmd.data[1] = upper_32_bits(ready_phys);
         cmd.data[2] = 1; /* value written to 'ready' */
         CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
 
@@ -95,15 +123,23 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
         if (ret)
                 return ret;
 
-        while (!ready)
+        while (!ready && (i < EXIT_LOOP_COUNT)) {
+                ++i;
                 cpu_relax();
+        }
+
+        if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
+                printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
 
         return 0;
 }
 
+/*
+ * Command send function for invalidating a device table entry
+ */
 static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
 {
-        struct command cmd;
+        struct iommu_cmd cmd;
 
         BUG_ON(iommu == NULL);
 
@@ -116,20 +152,23 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
         return iommu_queue_command(iommu, &cmd);
 }
 
+/*
+ * Generic command send function for invalidaing TLB entries
+ */
 static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
                 u64 address, u16 domid, int pde, int s)
 {
-        struct command cmd;
+        struct iommu_cmd cmd;
 
         memset(&cmd, 0, sizeof(cmd));
         address &= PAGE_MASK;
         CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES);
         cmd.data[1] |= domid;
         cmd.data[2] = LOW_U32(address);
-        cmd.data[3] = HIGH_U32(address);
-        if (s)
+        cmd.data[3] = upper_32_bits(address);
+        if (s) /* size bit - we flush more than one 4kb page */
                 cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
-        if (pde)
+        if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
                 cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
 
         iommu->need_sync = 1;
@@ -137,6 +176,11 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
         return iommu_queue_command(iommu, &cmd);
 }
 
+/*
+ * TLB invalidation function which is called from the mapping functions.
+ * It invalidates a single PTE if the range to flush is within a single
+ * page. Otherwise it flushes the whole TLB of the IOMMU.
+ */
 static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
                 u64 address, size_t size)
 {
@@ -159,6 +203,20 @@ static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
         return 0;
 }
 
+/****************************************************************************
+ *
+ * The functions below are used the create the page table mappings for
+ * unity mapped regions.
+ *
+ ****************************************************************************/
+
+/*
+ * Generic mapping functions. It maps a physical address into a DMA
+ * address space. It allocates the page table pages if necessary.
+ * In the future it can be extended to a generic mapping function
+ * supporting all features of AMD IOMMU page tables like level skipping
+ * and full 64 bit address spaces.
+ */
 static int iommu_map(struct protection_domain *dom,
                      unsigned long bus_addr,
                      unsigned long phys_addr,
@@ -209,6 +267,10 @@ static int iommu_map(struct protection_domain *dom,
         return 0;
 }
 
+/*
+ * This function checks if a specific unity mapping entry is needed for
+ * this specific IOMMU.
+ */
 static int iommu_for_unity_map(struct amd_iommu *iommu,
                                struct unity_map_entry *entry)
 {
@@ -223,6 +285,12 @@ static int iommu_for_unity_map(struct amd_iommu *iommu,
         return 0;
 }
 
+/*
+ * Init the unity mappings for a specific IOMMU in the system
+ *
+ * Basically iterates over all unity mapping entries and applies them to
+ * the default domain DMA of that IOMMU if necessary.
+ */
 static int iommu_init_unity_mappings(struct amd_iommu *iommu)
 {
         struct unity_map_entry *entry;
@@ -239,6 +307,10 @@ static int iommu_init_unity_mappings(struct amd_iommu *iommu)
         return 0;
 }
 
+/*
+ * This function actually applies the mapping to the page table of the
+ * dma_ops domain.
+ */
 static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
                              struct unity_map_entry *e)
 {
@@ -261,6 +333,9 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
         return 0;
 }
 
+/*
+ * Inits the unity mappings required for a specific device
+ */
 static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
                                           u16 devid)
 {
@@ -278,12 +353,26 @@ static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
         return 0;
 }
 
+/****************************************************************************
+ *
+ * The next functions belong to the address allocator for the dma_ops
+ * interface functions. They work like the allocators in the other IOMMU
+ * drivers. Its basically a bitmap which marks the allocated pages in
+ * the aperture. Maybe it could be enhanced in the future to a more
+ * efficient allocator.
+ *
+ ****************************************************************************/
 static unsigned long dma_mask_to_pages(unsigned long mask)
 {
         return (mask >> PAGE_SHIFT) +
                 (PAGE_ALIGN(mask & ~PAGE_MASK) >> PAGE_SHIFT);
 }
 
+/*
+ * The address allocator core function.
+ *
+ * called with domain->lock held
+ */
 static unsigned long dma_ops_alloc_addresses(struct device *dev,
                                              struct dma_ops_domain *dom,
                                              unsigned int pages)
@@ -317,6 +406,11 @@ static unsigned long dma_ops_alloc_addresses(struct device *dev,
         return address;
 }
 
+/*
+ * The address free function.
+ *
+ * called with domain->lock held
+ */
 static void dma_ops_free_addresses(struct dma_ops_domain *dom,
                                    unsigned long address,
                                    unsigned int pages)
@@ -325,6 +419,16 @@ static void dma_ops_free_addresses(struct dma_ops_domain *dom,
         iommu_area_free(dom->bitmap, address, pages);
 }
 
+/****************************************************************************
+ *
+ * The next functions belong to the domain allocation. A domain is
+ * allocated for every IOMMU as the default domain. If device isolation
+ * is enabled, every device get its own domain. The most important thing
+ * about domains is the page table mapping the DMA address space they
+ * contain.
+ *
+ ****************************************************************************/
+
 static u16 domain_id_alloc(void)
 {
         unsigned long flags;
@@ -342,6 +446,10 @@ static u16 domain_id_alloc(void)
         return id;
 }
 
+/*
+ * Used to reserve address ranges in the aperture (e.g. for exclusion
+ * ranges.
+ */
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
                                       unsigned long start_page,
                                       unsigned int pages)
@@ -382,6 +490,10 @@ static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom)
         free_page((unsigned long)p1);
 }
 
+/*
+ * Free a domain, only used if something went wrong in the
+ * allocation path and we need to free an already allocated page table
+ */
 static void dma_ops_domain_free(struct dma_ops_domain *dom)
 {
         if (!dom)
@@ -396,6 +508,11 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom)
         kfree(dom);
 }
 
+/*
+ * Allocates a new protection domain usable for the dma_ops functions.
+ * It also intializes the page table and the address allocator data
+ * structures required for the dma_ops interface
+ */
 static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
                                                    unsigned order)
 {
@@ -436,6 +553,7 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
         dma_dom->bitmap[0] = 1;
         dma_dom->next_bit = 0;
 
+        /* Intialize the exclusion range if necessary */
         if (iommu->exclusion_start &&
             iommu->exclusion_start < dma_dom->aperture_size) {
                 unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
@@ -444,6 +562,11 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
                 dma_ops_reserve_addresses(dma_dom, startpage, pages);
         }
 
+        /*
+         * At the last step, build the page tables so we don't need to
+         * allocate page table pages in the dma_ops mapping/unmapping
+         * path.
+         */
         num_pte_pages = dma_dom->aperture_size / (PAGE_SIZE * 512);
         dma_dom->pte_pages = kzalloc(num_pte_pages * sizeof(void *),
                         GFP_KERNEL);
@@ -472,6 +595,10 @@ free_dma_dom:
         return NULL;
 }
 
+/*
+ * Find out the protection domain structure for a given PCI device. This
+ * will give us the pointer to the page table root for example.
+ */
 static struct protection_domain *domain_for_device(u16 devid)
 {
         struct protection_domain *dom;
@@ -484,6 +611,10 @@ static struct protection_domain *domain_for_device(u16 devid)
         return dom;
 }
 
+/*
+ * If a device is not yet associated with a domain, this function does
+ * assigns it visible for the hardware
+ */
 static void set_device_domain(struct amd_iommu *iommu,
                               struct protection_domain *domain,
                               u16 devid)
@@ -508,6 +639,19 @@ static void set_device_domain(struct amd_iommu *iommu,
         iommu->need_sync = 1;
 }
 
+/*****************************************************************************
+ *
+ * The next functions belong to the dma_ops mapping/unmapping code.
+ *
+ *****************************************************************************/
+
+/*
+ * In the dma_ops path we only have the struct device. This function
+ * finds the corresponding IOMMU, the protection domain and the
+ * requestor id for a given device.
+ * If the device is not yet associated with a domain this is also done
+ * in this function.
+ */
 static int get_device_resources(struct device *dev,
                                 struct amd_iommu **iommu,
                                 struct protection_domain **domain,
@@ -520,9 +664,10 @@ static int get_device_resources(struct device *dev,
         BUG_ON(!dev || dev->bus != &pci_bus_type || !dev->dma_mask);
 
         pcidev = to_pci_dev(dev);
-        _bdf = (pcidev->bus->number << 8) | pcidev->devfn;
+        _bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
 
-        if (_bdf >= amd_iommu_last_bdf) {
+        /* device not translated by any IOMMU in the system? */
+        if (_bdf > amd_iommu_last_bdf) {
                 *iommu = NULL;
                 *domain = NULL;
                 *bdf = 0xffff;
@@ -547,6 +692,10 @@ static int get_device_resources(struct device *dev,
         return 1;
 }
 
+/*
+ * This is the generic map function. It maps one 4kb page at paddr to
+ * the given address in the DMA address space for the domain.
+ */
 static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
                                      struct dma_ops_domain *dom,
                                      unsigned long address,
@@ -578,6 +727,9 @@ static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
         return (dma_addr_t)address;
 }
 
+/*
+ * The generic unmapping function for on page in the DMA address space.
+ */
 static void dma_ops_domain_unmap(struct amd_iommu *iommu,
                                  struct dma_ops_domain *dom,
                                  unsigned long address)
@@ -597,6 +749,12 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
         *pte = 0ULL;
 }
 
+/*
+ * This function contains common code for mapping of a physically
+ * contiguous memory region into DMA address space. It is uses by all
+ * mapping functions provided by this IOMMU driver.
+ * Must be called with the domain lock held.
+ */
 static dma_addr_t __map_single(struct device *dev,
                                struct amd_iommu *iommu,
                                struct dma_ops_domain *dma_dom,
@@ -628,6 +786,10 @@ out:
         return address;
 }
 
+/*
+ * Does the reverse of the __map_single function. Must be called with
+ * the domain lock held too
+ */
 static void __unmap_single(struct amd_iommu *iommu,
                            struct dma_ops_domain *dma_dom,
                            dma_addr_t dma_addr,
@@ -652,6 +814,9 @@ static void __unmap_single(struct amd_iommu *iommu,
         dma_ops_free_addresses(dma_dom, dma_addr, pages);
 }
 
+/*
+ * The exported map_single function for dma_ops.
+ */
 static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
                              size_t size, int dir)
 {
@@ -664,6 +829,7 @@ static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
         get_device_resources(dev, &iommu, &domain, &devid);
 
         if (iommu == NULL || domain == NULL)
+                /* device not handled by any AMD IOMMU */
                 return (dma_addr_t)paddr;
 
         spin_lock_irqsave(&domain->lock, flags);
@@ -683,6 +849,9 @@ out:
         return addr;
 }
 
+/*
+ * The exported unmap_single function for dma_ops.
+ */
 static void unmap_single(struct device *dev, dma_addr_t dma_addr,
                          size_t size, int dir)
 {
@@ -692,6 +861,7 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
         u16 devid;
 
         if (!get_device_resources(dev, &iommu, &domain, &devid))
+                /* device not handled by any AMD IOMMU */
                 return;
 
         spin_lock_irqsave(&domain->lock, flags);
@@ -706,6 +876,10 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
         spin_unlock_irqrestore(&domain->lock, flags);
 }
 
+/*
+ * This is a special map_sg function which is used if we should map a
+ * device which is not handled by an AMD IOMMU in the system.
+ */
 static int map_sg_no_iommu(struct device *dev, struct scatterlist *sglist,
                            int nelems, int dir)
 {
@@ -720,6 +894,10 @@ static int map_sg_no_iommu(struct device *dev, struct scatterlist *sglist,
         return nelems;
 }
 
+/*
+ * The exported map_sg function for dma_ops (handles scatter-gather
+ * lists).
+ */
 static int map_sg(struct device *dev, struct scatterlist *sglist,
                   int nelems, int dir)
 {
@@ -775,6 +953,10 @@ unmap:
         goto out;
 }
 
+/*
+ * The exported map_sg function for dma_ops (handles scatter-gather
+ * lists).
+ */
 static void unmap_sg(struct device *dev, struct scatterlist *sglist,
                      int nelems, int dir)
 {
@@ -804,6 +986,9 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist,
         spin_unlock_irqrestore(&domain->lock, flags);
 }
 
+/*
+ * The exported alloc_coherent function for dma_ops.
+ */
 static void *alloc_coherent(struct device *dev, size_t size,
                             dma_addr_t *dma_addr, gfp_t flag)
 {
@@ -851,6 +1036,11 @@ out:
         return virt_addr;
 }
 
+/*
+ * The exported free_coherent function for dma_ops.
+ * FIXME: fix the generic x86 DMA layer so that it actually calls that
+ *        function.
+ */
 static void free_coherent(struct device *dev, size_t size,
                           void *virt_addr, dma_addr_t dma_addr)
 {
@@ -879,6 +1069,8 @@ free_mem:
 }
 
 /*
+ * The function for pre-allocating protection domains.
+ *
  * If the driver core informs the DMA layer if a driver grabs a device
  * we don't need to preallocate the protection domains anymore.
  * For now we have to.
@@ -893,7 +1085,7 @@ void prealloc_protection_domains(void)
 
         while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
                 devid = (dev->bus->number << 8) | dev->devfn;
-                if (devid >= amd_iommu_last_bdf)
+                if (devid > amd_iommu_last_bdf)
                         continue;
                 devid = amd_iommu_alias_table[devid];
                 if (domain_for_device(devid))
@@ -921,12 +1113,20 @@ static struct dma_mapping_ops amd_iommu_dma_ops = {
         .unmap_sg = unmap_sg,
 };
 
+/*
+ * The function which clues the AMD IOMMU driver into dma_ops.
+ */
 int __init amd_iommu_init_dma_ops(void)
 {
         struct amd_iommu *iommu;
         int order = amd_iommu_aperture_order;
         int ret;
 
+        /*
+         * first allocate a default protection domain for every IOMMU we
+         * found in the system. Devices not assigned to any other
+         * protection domain will be assigned to the default one.
+         */
         list_for_each_entry(iommu, &amd_iommu_list, list) {
                 iommu->default_dom = dma_ops_domain_alloc(iommu, order);
                 if (iommu->default_dom == NULL)
@@ -936,6 +1136,10 @@ int __init amd_iommu_init_dma_ops(void)
                         goto free_domains;
         }
 
+        /*
+         * If device isolation is enabled, pre-allocate the protection
+         * domains for each device.
+         */
         if (amd_iommu_isolate)
                 prealloc_protection_domains();
 
@@ -947,6 +1151,7 @@ int __init amd_iommu_init_dma_ops(void)
         gart_iommu_aperture = 0;
 #endif
 
+        /* Make the driver finally visible to the drivers */
         dma_ops = &amd_iommu_dma_ops;
 
         return 0;
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 2a13e430437d..d9a9da597e79 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -25,20 +25,13 @@
 #include <asm/pci-direct.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 
 /*
  * definitions for the ACPI scanning code
  */
-#define UPDATE_LAST_BDF(x) do {\
-        if ((x) > amd_iommu_last_bdf) \
-                amd_iommu_last_bdf = (x); \
-        } while (0);
-
-#define DEVID(bus, devfn) (((bus) << 8) | (devfn))
 #define PCI_BUS(x) (((x) >> 8) & 0xff)
 #define IVRS_HEADER_LENGTH 48
-#define TBL_SIZE(x) (1 << (PAGE_SHIFT + get_order(amd_iommu_last_bdf * (x))))
 
 #define ACPI_IVHD_TYPE                  0x10
 #define ACPI_IVMD_TYPE_ALL              0x20
@@ -71,6 +64,17 @@
 #define ACPI_DEVFLAG_LINT1              0x80
 #define ACPI_DEVFLAG_ATSDIS             0x10000000
 
+/*
+ * ACPI table definitions
+ *
+ * These data structures are laid over the table to parse the important values
+ * out of it.
+ */
+
+/*
+ * structure describing one IOMMU in the ACPI table. Typically followed by one
+ * or more ivhd_entrys.
+ */
 struct ivhd_header {
         u8 type;
         u8 flags;
@@ -83,6 +87,10 @@ struct ivhd_header {
         u32 reserved;
 } __attribute__((packed));
 
+/*
+ * A device entry describing which devices a specific IOMMU translates and
+ * which requestor ids they use.
+ */
 struct ivhd_entry {
         u8 type;
         u16 devid;
@@ -90,6 +98,10 @@ struct ivhd_entry {
         u32 ext;
 } __attribute__((packed));
 
+/*
+ * An AMD IOMMU memory definition structure. It defines things like exclusion
+ * ranges for devices and regions that should be unity mapped.
+ */
 struct ivmd_header {
         u8 type;
         u8 flags;
@@ -103,22 +115,80 @@ struct ivmd_header {
 
 static int __initdata amd_iommu_detected;
 
-u16 amd_iommu_last_bdf;
-struct list_head amd_iommu_unity_map;
-unsigned amd_iommu_aperture_order = 26;
-int amd_iommu_isolate;
+u16 amd_iommu_last_bdf;                 /* largest PCI device id we have
+                                           to handle */
+LIST_HEAD(amd_iommu_unity_map);         /* a list of required unity mappings
+                                           we find in ACPI */
+unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */
+int amd_iommu_isolate;                  /* if 1, device isolation is enabled */
+
+LIST_HEAD(amd_iommu_list);              /* list of all AMD IOMMUs in the
+                                           system */
 
-struct list_head amd_iommu_list;
+/*
+ * Pointer to the device table which is shared by all AMD IOMMUs
+ * it is indexed by the PCI device id or the HT unit id and contains
+ * information about the domain the device belongs to as well as the
+ * page table root pointer.
+ */
 struct dev_table_entry *amd_iommu_dev_table;
+
+/*
+ * The alias table is a driver specific data structure which contains the
+ * mappings of the PCI device ids to the actual requestor ids on the IOMMU.
+ * More than one device can share the same requestor id.
+ */
 u16 *amd_iommu_alias_table;
+
+/*
+ * The rlookup table is used to find the IOMMU which is responsible
+ * for a specific device. It is also indexed by the PCI device id.
+ */
 struct amd_iommu **amd_iommu_rlookup_table;
+
+/*
+ * The pd table (protection domain table) is used to find the protection domain
+ * data structure a device belongs to. Indexed with the PCI device id too.
+ */
 struct protection_domain **amd_iommu_pd_table;
+
+/*
+ * AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap
+ * to know which ones are already in use.
+ */
 unsigned long *amd_iommu_pd_alloc_bitmap;
 
-static u32 dev_table_size;
-static u32 alias_table_size;
-static u32 rlookup_table_size;
+static u32 dev_table_size;      /* size of the device table */
+static u32 alias_table_size;    /* size of the alias table */
+static u32 rlookup_table_size;  /* size if the rlookup table */
 
+static inline void update_last_devid(u16 devid)
+{
+        if (devid > amd_iommu_last_bdf)
+                amd_iommu_last_bdf = devid;
+}
+
+static inline unsigned long tbl_size(int entry_size)
+{
+        unsigned shift = PAGE_SHIFT +
+                         get_order(amd_iommu_last_bdf * entry_size);
+
+        return 1UL << shift;
+}
+
+/****************************************************************************
+ *
+ * AMD IOMMU MMIO register space handling functions
+ *
+ * These functions are used to program the IOMMU device registers in
+ * MMIO space required for that driver.
+ *
+ ****************************************************************************/
+
+/*
+ * This function set the exclusion range in the IOMMU. DMA accesses to the
+ * exclusion range are passed through untranslated
+ */
 static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
 {
         u64 start = iommu->exclusion_start & PAGE_MASK;
@@ -137,6 +207,7 @@ static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
                         &entry, sizeof(entry));
 }
 
+/* Programs the physical address of the device table into the IOMMU hardware */
 static void __init iommu_set_device_table(struct amd_iommu *iommu)
 {
         u32 entry;
@@ -149,6 +220,7 @@ static void __init iommu_set_device_table(struct amd_iommu *iommu)
                         &entry, sizeof(entry));
 }
 
+/* Generic functions to enable/disable certain features of the IOMMU. */
 static void __init iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
 {
         u32 ctrl;
@@ -167,6 +239,7 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
         writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
 }
 
+/* Function to enable the hardware */
 void __init iommu_enable(struct amd_iommu *iommu)
 {
         printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at ");
@@ -176,6 +249,10 @@ void __init iommu_enable(struct amd_iommu *iommu)
         iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
 }
 
+/*
+ * mapping and unmapping functions for the IOMMU MMIO space. Each AMD IOMMU in
+ * the system has one.
+ */
 static u8 * __init iommu_map_mmio_space(u64 address)
 {
         u8 *ret;
@@ -199,16 +276,33 @@ static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu)
         release_mem_region(iommu->mmio_phys, MMIO_REGION_LENGTH);
 }
 
+/****************************************************************************
+ *
+ * The functions below belong to the first pass of AMD IOMMU ACPI table
+ * parsing. In this pass we try to find out the highest device id this
+ * code has to handle. Upon this information the size of the shared data
+ * structures is determined later.
+ *
+ ****************************************************************************/
+
+/*
+ * This function reads the last device id the IOMMU has to handle from the PCI
+ * capability header for this IOMMU
+ */
 static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr)
 {
         u32 cap;
 
         cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
-        UPDATE_LAST_BDF(DEVID(MMIO_GET_BUS(cap), MMIO_GET_LD(cap)));
+        update_last_devid(calc_devid(MMIO_GET_BUS(cap), MMIO_GET_LD(cap)));
 
         return 0;
 }
 
+/*
+ * After reading the highest device id from the IOMMU PCI capability header
+ * this function looks if there is a higher device id defined in the ACPI table
+ */
 static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
 {
         u8 *p = (void *)h, *end = (void *)h;
@@ -229,7 +323,8 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
                 case IVHD_DEV_RANGE_END:
                 case IVHD_DEV_ALIAS:
                 case IVHD_DEV_EXT_SELECT:
-                        UPDATE_LAST_BDF(dev->devid);
+                        /* all the above subfield types refer to device ids */
+                        update_last_devid(dev->devid);
                         break;
                 default:
                         break;
@@ -242,6 +337,11 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
         return 0;
 }
 
+/*
+ * Iterate over all IVHD entries in the ACPI table and find the highest device
+ * id which we need to handle. This is the first of three functions which parse
+ * the ACPI table. So we check the checksum here.
+ */
 static int __init find_last_devid_acpi(struct acpi_table_header *table)
 {
         int i;
@@ -277,19 +377,31 @@ static int __init find_last_devid_acpi(struct acpi_table_header *table)
         return 0;
 }
 
+/****************************************************************************
+ *
+ * The following functions belong the the code path which parses the ACPI table
+ * the second time. In this ACPI parsing iteration we allocate IOMMU specific
+ * data structures, initialize the device/alias/rlookup table and also
+ * basically initialize the hardware.
+ *
+ ****************************************************************************/
+
+/*
+ * Allocates the command buffer. This buffer is per AMD IOMMU. We can
+ * write commands to that buffer later and the IOMMU will execute them
+ * asynchronously
+ */
 static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 {
-        u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL,
+        u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
                         get_order(CMD_BUFFER_SIZE));
-        u64 entry = 0;
+        u64 entry;
 
         if (cmd_buf == NULL)
                 return NULL;
 
         iommu->cmd_buf_size = CMD_BUFFER_SIZE;
 
-        memset(cmd_buf, 0, CMD_BUFFER_SIZE);
-
         entry = (u64)virt_to_phys(cmd_buf);
         entry |= MMIO_CMD_SIZE_512;
         memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
@@ -302,11 +414,10 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 
 static void __init free_command_buffer(struct amd_iommu *iommu)
 {
-        if (iommu->cmd_buf)
-                free_pages((unsigned long)iommu->cmd_buf,
-                                get_order(CMD_BUFFER_SIZE));
+        free_pages((unsigned long)iommu->cmd_buf, get_order(CMD_BUFFER_SIZE));
 }
 
+/* sets a specific bit in the device table entry. */
 static void set_dev_entry_bit(u16 devid, u8 bit)
 {
         int i = (bit >> 5) & 0x07;
@@ -315,7 +426,18 @@ static void set_dev_entry_bit(u16 devid, u8 bit)
         amd_iommu_dev_table[devid].data[i] |= (1 << _bit);
 }
 
-static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags)
+/* Writes the specific IOMMU for a device into the rlookup table */
+static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
+{
+        amd_iommu_rlookup_table[devid] = iommu;
+}
+
+/*
+ * This function takes the device specific flags read from the ACPI
+ * table and sets up the device table entry with that information
+ */
+static void __init set_dev_entry_from_acpi(struct amd_iommu *iommu,
+                                           u16 devid, u32 flags, u32 ext_flags)
 {
         if (flags & ACPI_DEVFLAG_INITPASS)
                 set_dev_entry_bit(devid, DEV_ENTRY_INIT_PASS);
@@ -331,13 +453,14 @@ static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags)
                 set_dev_entry_bit(devid, DEV_ENTRY_LINT0_PASS);
         if (flags & ACPI_DEVFLAG_LINT1)
                 set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS);
-}
 
-static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
-{
-        amd_iommu_rlookup_table[devid] = iommu;
+        set_iommu_for_device(iommu, devid);
 }
 
+/*
+ * Reads the device exclusion range from ACPI and initialize IOMMU with
+ * it
+ */
 static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
 {
         struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
@@ -346,12 +469,22 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
                 return;
 
         if (iommu) {
+                /*
+                 * We only can configure exclusion ranges per IOMMU, not
+                 * per device. But we can enable the exclusion range per
+                 * device. This is done here
+                 */
                 set_dev_entry_bit(m->devid, DEV_ENTRY_EX);
                 iommu->exclusion_start = m->range_start;
                 iommu->exclusion_length = m->range_length;
         }
 }
 
+/*
+ * This function reads some important data from the IOMMU PCI space and
+ * initializes the driver data structure with it. It reads the hardware
+ * capabilities and the first/last device entries
+ */
 static void __init init_iommu_from_pci(struct amd_iommu *iommu)
 {
         int bus = PCI_BUS(iommu->devid);
@@ -363,10 +496,16 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu)
         iommu->cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_CAP_HDR_OFFSET);
 
         range = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
-        iommu->first_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_FD(range));
-        iommu->last_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_LD(range));
+        iommu->first_device = calc_devid(MMIO_GET_BUS(range),
+                                         MMIO_GET_FD(range));
+        iommu->last_device = calc_devid(MMIO_GET_BUS(range),
+                                        MMIO_GET_LD(range));
 }
 
+/*
+ * Takes a pointer to an AMD IOMMU entry in the ACPI table and
+ * initializes the hardware and our data structures with it.
+ */
 static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
                                         struct ivhd_header *h)
 {
@@ -374,7 +513,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
         u8 *end = p, flags = 0;
         u16 dev_i, devid = 0, devid_start = 0, devid_to = 0;
         u32 ext_flags = 0;
-        bool alias = 0;
+        bool alias = false;
         struct ivhd_entry *e;
 
         /*
@@ -414,22 +553,23 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
                 case IVHD_DEV_ALL:
                         for (dev_i = iommu->first_device;
                                         dev_i <= iommu->last_device; ++dev_i)
-                                set_dev_entry_from_acpi(dev_i, e->flags, 0);
+                                set_dev_entry_from_acpi(iommu, dev_i,
+                                                        e->flags, 0);
                         break;
                 case IVHD_DEV_SELECT:
                         devid = e->devid;
-                        set_dev_entry_from_acpi(devid, e->flags, 0);
+                        set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
                         break;
                 case IVHD_DEV_SELECT_RANGE_START:
                         devid_start = e->devid;
                         flags = e->flags;
                         ext_flags = 0;
-                        alias = 0;
+                        alias = false;
                         break;
                 case IVHD_DEV_ALIAS:
                         devid = e->devid;
                         devid_to = e->ext >> 8;
-                        set_dev_entry_from_acpi(devid, e->flags, 0);
+                        set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
                         amd_iommu_alias_table[devid] = devid_to;
                         break;
                 case IVHD_DEV_ALIAS_RANGE:
@@ -437,24 +577,25 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
                         flags = e->flags;
                         devid_to = e->ext >> 8;
                         ext_flags = 0;
-                        alias = 1;
+                        alias = true;
                         break;
                 case IVHD_DEV_EXT_SELECT:
                         devid = e->devid;
-                        set_dev_entry_from_acpi(devid, e->flags, e->ext);
+                        set_dev_entry_from_acpi(iommu, devid, e->flags,
+                                                e->ext);
                         break;
                 case IVHD_DEV_EXT_SELECT_RANGE:
                         devid_start = e->devid;
                         flags = e->flags;
                         ext_flags = e->ext;
-                        alias = 0;
+                        alias = false;
                         break;
                 case IVHD_DEV_RANGE_END:
                         devid = e->devid;
                         for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
                                 if (alias)
                                         amd_iommu_alias_table[dev_i] = devid_to;
-                                set_dev_entry_from_acpi(
+                                set_dev_entry_from_acpi(iommu,
                                                 amd_iommu_alias_table[dev_i],
                                                 flags, ext_flags);
                         }
@@ -467,6 +608,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
         }
 }
 
+/* Initializes the device->iommu mapping for the driver */
 static int __init init_iommu_devices(struct amd_iommu *iommu)
 {
         u16 i;
@@ -494,6 +636,11 @@ static void __init free_iommu_all(void)
         }
 }
 
+/*
+ * This function clues the initialization function for one IOMMU
+ * together and also allocates the command buffer and programs the
+ * hardware. It does NOT enable the IOMMU. This is done afterwards.
+ */
 static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 {
         spin_lock_init(&iommu->lock);
@@ -521,6 +668,10 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
         return 0;
 }
 
+/*
+ * Iterates over all IOMMU entries in the ACPI table, allocates the
+ * IOMMU structure and initializes it with init_iommu_one()
+ */
 static int __init init_iommu_all(struct acpi_table_header *table)
 {
         u8 *p = (u8 *)table, *end = (u8 *)table;
@@ -528,8 +679,6 @@ static int __init init_iommu_all(struct acpi_table_header *table)
         struct amd_iommu *iommu;
         int ret;
 
-        INIT_LIST_HEAD(&amd_iommu_list);
-
         end += table->length;
         p += IVRS_HEADER_LENGTH;
 
@@ -555,6 +704,14 @@ static int __init init_iommu_all(struct acpi_table_header *table)
         return 0;
 }
 
+/****************************************************************************
+ *
+ * The next functions belong to the third pass of parsing the ACPI
+ * table. In this last pass the memory mapping requirements are
+ * gathered (like exclusion and unity mapping reanges).
+ *
+ ****************************************************************************/
+
 static void __init free_unity_maps(void)
 {
         struct unity_map_entry *entry, *next;
@@ -565,6 +722,7 @@ static void __init free_unity_maps(void)
         }
 }
 
+/* called when we find an exclusion range definition in ACPI */
 static int __init init_exclusion_range(struct ivmd_header *m)
 {
         int i;
@@ -574,7 +732,7 @@ static int __init init_exclusion_range(struct ivmd_header *m)
                 set_device_exclusion_range(m->devid, m);
                 break;
         case ACPI_IVMD_TYPE_ALL:
-                for (i = 0; i < amd_iommu_last_bdf; ++i)
+                for (i = 0; i <= amd_iommu_last_bdf; ++i)
                         set_device_exclusion_range(i, m);
                 break;
         case ACPI_IVMD_TYPE_RANGE:
@@ -588,6 +746,7 @@ static int __init init_exclusion_range(struct ivmd_header *m)
         return 0;
 }
 
+/* called for unity map ACPI definition */
 static int __init init_unity_map_range(struct ivmd_header *m)
 {
         struct unity_map_entry *e = 0;
@@ -619,13 +778,12 @@ static int __init init_unity_map_range(struct ivmd_header *m)
         return 0;
 }
 
+/* iterates over all memory definitions we find in the ACPI table */
 static int __init init_memory_definitions(struct acpi_table_header *table)
 {
         u8 *p = (u8 *)table, *end = (u8 *)table;
         struct ivmd_header *m;
 
-        INIT_LIST_HEAD(&amd_iommu_unity_map);
-
         end += table->length;
         p += IVRS_HEADER_LENGTH;
 
@@ -642,6 +800,10 @@ static int __init init_memory_definitions(struct acpi_table_header *table)
         return 0;
 }
 
+/*
+ * This function finally enables all IOMMUs found in the system after
+ * they have been initialized
+ */
 static void __init enable_iommus(void)
 {
         struct amd_iommu *iommu;
@@ -678,6 +840,34 @@ static struct sys_device device_amd_iommu = {
         .cls = &amd_iommu_sysdev_class,
 };
 
+/*
+ * This is the core init function for AMD IOMMU hardware in the system.
+ * This function is called from the generic x86 DMA layer initialization
+ * code.
+ *
+ * This function basically parses the ACPI table for AMD IOMMU (IVRS)
+ * three times:
+ *
+ *      1 pass) Find the highest PCI device id the driver has to handle.
+ *              Upon this information the size of the data structures is
+ *              determined that needs to be allocated.
+ *
+ *      2 pass) Initialize the data structures just allocated with the
+ *              information in the ACPI table about available AMD IOMMUs
+ *              in the system. It also maps the PCI devices in the
+ *              system to specific IOMMUs
+ *
+ *      3 pass) After the basic data structures are allocated and
+ *              initialized we update them with information about memory
+ *              remapping requirements parsed out of the ACPI table in
+ *              this last pass.
+ *
+ * After that the hardware is initialized and ready to go. In the last
+ * step we do some Linux specific things like registering the driver in
+ * the dma_ops interface and initializing the suspend/resume support
+ * functions. Finally it prints some information about AMD IOMMUs and
+ * the driver state and enables the hardware.
+ */
 int __init amd_iommu_init(void)
 {
         int i, ret = 0;
@@ -699,14 +889,14 @@ int __init amd_iommu_init(void)
         if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0)
                 return -ENODEV;
 
-        dev_table_size     = TBL_SIZE(DEV_TABLE_ENTRY_SIZE);
-        alias_table_size   = TBL_SIZE(ALIAS_TABLE_ENTRY_SIZE);
-        rlookup_table_size = TBL_SIZE(RLOOKUP_TABLE_ENTRY_SIZE);
+        dev_table_size     = tbl_size(DEV_TABLE_ENTRY_SIZE);
+        alias_table_size   = tbl_size(ALIAS_TABLE_ENTRY_SIZE);
+        rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE);
 
         ret = -ENOMEM;
 
         /* Device table - directly used by all IOMMUs */
-        amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL,
+        amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
                                       get_order(dev_table_size));
         if (amd_iommu_dev_table == NULL)
                 goto out;
@@ -730,27 +920,23 @@ int __init amd_iommu_init(void)
          * Protection Domain table - maps devices to protection domains
          * This table has the same size as the rlookup_table
          */
-        amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL,
+        amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
                                      get_order(rlookup_table_size));
         if (amd_iommu_pd_table == NULL)
                 goto free;
 
-        amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(GFP_KERNEL,
+        amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(
+                                            GFP_KERNEL | __GFP_ZERO,
                                             get_order(MAX_DOMAIN_ID/8));
         if (amd_iommu_pd_alloc_bitmap == NULL)
                 goto free;
 
         /*
-         * memory is allocated now; initialize the device table with all zeroes
-         * and let all alias entries point to itself
+         * let all alias entries point to itself
          */
-        memset(amd_iommu_dev_table, 0, dev_table_size);
-        for (i = 0; i < amd_iommu_last_bdf; ++i)
+        for (i = 0; i <= amd_iommu_last_bdf; ++i)
                 amd_iommu_alias_table[i] = i;
 
-        memset(amd_iommu_pd_table, 0, rlookup_table_size);
-        memset(amd_iommu_pd_alloc_bitmap, 0, MAX_DOMAIN_ID / 8);
-
         /*
          * never allocate domain 0 because its used as the non-allocated and
          * error value placeholder
@@ -795,24 +981,19 @@ out:
         return ret;
 
 free:
-        if (amd_iommu_pd_alloc_bitmap)
-                free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1);
+        free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1);
 
-        if (amd_iommu_pd_table)
-                free_pages((unsigned long)amd_iommu_pd_table,
-                                get_order(rlookup_table_size));
+        free_pages((unsigned long)amd_iommu_pd_table,
+                   get_order(rlookup_table_size));
 
-        if (amd_iommu_rlookup_table)
-                free_pages((unsigned long)amd_iommu_rlookup_table,
-                                get_order(rlookup_table_size));
+        free_pages((unsigned long)amd_iommu_rlookup_table,
+                   get_order(rlookup_table_size));
 
-        if (amd_iommu_alias_table)
-                free_pages((unsigned long)amd_iommu_alias_table,
-                                get_order(alias_table_size));
+        free_pages((unsigned long)amd_iommu_alias_table,
+                   get_order(alias_table_size));
 
-        if (amd_iommu_dev_table)
-                free_pages((unsigned long)amd_iommu_dev_table,
-                                get_order(dev_table_size));
+        free_pages((unsigned long)amd_iommu_dev_table,
+                   get_order(dev_table_size));
 
         free_iommu_all();
 
@@ -821,6 +1002,13 @@ free:
         goto out;
 }
 
+/****************************************************************************
+ *
+ * Early detect code. This code runs at IOMMU detection time in the DMA
+ * layer. It just looks if there is an IVRS ACPI table to detect AMD
+ * IOMMUs
+ *
+ ****************************************************************************/
 static int __init early_amd_iommu_detect(struct acpi_table_header *table)
 {
         return 0;
@@ -828,7 +1016,7 @@ static int __init early_amd_iommu_detect(struct acpi_table_header *table)
 
 void __init amd_iommu_detect(void)
 {
-        if (swiotlb || no_iommu || iommu_detected)
+        if (swiotlb || no_iommu || (iommu_detected && !gart_iommu_aperture))
                 return;
 
         if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) {
@@ -841,6 +1029,13 @@ void __init amd_iommu_detect(void)
         }
 }
 
+/****************************************************************************
+ *
+ * Parsing functions for the AMD IOMMU specific kernel command line
+ * options.
+ *
+ ****************************************************************************/
+
 static int __init parse_amd_iommu_options(char *str)
 {
         for (; *str; ++str) {
@@ -853,20 +1048,10 @@ static int __init parse_amd_iommu_options(char *str)
 
 static int __init parse_amd_iommu_size_options(char *str)
 {
-        for (; *str; ++str) {
-                if (strcmp(str, "32M") == 0)
-                        amd_iommu_aperture_order = 25;
-                if (strcmp(str, "64M") == 0)
-                        amd_iommu_aperture_order = 26;
-                if (strcmp(str, "128M") == 0)
-                        amd_iommu_aperture_order = 27;
-                if (strcmp(str, "256M") == 0)
-                        amd_iommu_aperture_order = 28;
-                if (strcmp(str, "512M") == 0)
-                        amd_iommu_aperture_order = 29;
-                if (strcmp(str, "1G") == 0)
-                        amd_iommu_aperture_order = 30;
-        }
+        unsigned order = PAGE_SHIFT + get_order(memparse(str, &str));
+
+        if ((order > 24) && (order < 31))
+                amd_iommu_aperture_order = order;
 
         return 1;
 }
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 9f907806c1a5..44e21826db11 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -21,6 +21,7 @@
 #include <linux/suspend.h>
 #include <asm/e820.h>
 #include <asm/io.h>
+#include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/pci-direct.h>
 #include <asm/dma.h>
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index a437d027f20b..d6c898358371 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -75,7 +75,7 @@ char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
 /*
  * Debug level, exported for io_apic.c
  */
-int apic_verbosity;
+unsigned int apic_verbosity;
 
 int pic_mode;
 
@@ -177,7 +177,7 @@ void __cpuinit enable_NMI_through_LVT0(void)
         /* Level triggered for 82489DX */
         if (!lapic_is_integrated())
                 v |= APIC_LVT_LEVEL_TRIGGER;
-        apic_write_around(APIC_LVT0, v);
+        apic_write(APIC_LVT0, v);
 }
 
 /**
@@ -212,9 +212,6 @@ int lapic_get_maxlvt(void)
  * this function twice on the boot CPU, once with a bogus timeout
  * value, second time for real. The other (noncalibrating) CPUs
  * call this function only once, with the real, calibrated value.
- *
- * We do reads before writes even if unnecessary, to get around the
- * P5 APIC double write bug.
  */
 static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 {
@@ -229,18 +226,18 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
         if (!irqen)
                 lvtt_value |= APIC_LVT_MASKED;
 
-        apic_write_around(APIC_LVTT, lvtt_value);
+        apic_write(APIC_LVTT, lvtt_value);
 
         /*
          * Divide PICLK by 16
          */
         tmp_value = apic_read(APIC_TDCR);
-        apic_write_around(APIC_TDCR, (tmp_value
-                                & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
-                                | APIC_TDR_DIV_16);
+        apic_write(APIC_TDCR,
+                   (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+                   APIC_TDR_DIV_16);
 
         if (!oneshot)
-                apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
+                apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
 }
 
 /*
@@ -249,7 +246,7 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 static int lapic_next_event(unsigned long delta,
                             struct clock_event_device *evt)
 {
-        apic_write_around(APIC_TMICT, delta);
+        apic_write(APIC_TMICT, delta);
         return 0;
 }
 
@@ -278,7 +275,7 @@ static void lapic_timer_setup(enum clock_event_mode mode,
         case CLOCK_EVT_MODE_SHUTDOWN:
                 v = apic_read(APIC_LVTT);
                 v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-                apic_write_around(APIC_LVTT, v);
+                apic_write(APIC_LVTT, v);
                 break;
         case CLOCK_EVT_MODE_RESUME:
                 /* Nothing to do here */
@@ -372,12 +369,7 @@ static void __init lapic_cal_handler(struct clock_event_device *dev)
         }
 }
 
-/*
- * Setup the boot APIC
- *
- * Calibrate and verify the result.
- */
-void __init setup_boot_APIC_clock(void)
+static int __init calibrate_APIC_clock(void)
 {
         struct clock_event_device *levt = &__get_cpu_var(lapic_events);
         const long pm_100ms = PMTMR_TICKS_PER_SEC/10;
@@ -387,24 +379,6 @@ void __init setup_boot_APIC_clock(void)
         long delta, deltapm;
         int pm_referenced = 0;
 
-        /*
-         * The local apic timer can be disabled via the kernel
-         * commandline or from the CPU detection code. Register the lapic
-         * timer as a dummy clock event source on SMP systems, so the
-         * broadcast mechanism is used. On UP systems simply ignore it.
-         */
-        if (local_apic_timer_disabled) {
-                /* No broadcast on UP ! */
-                if (num_possible_cpus() > 1) {
-                        lapic_clockevent.mult = 1;
-                        setup_APIC_timer();
-                }
-                return;
-        }
-
-        apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
-                    "calibrating APIC timer ...\n");
-
         local_irq_disable();
 
         /* Replace the global interrupt handler */
@@ -489,8 +463,6 @@ void __init setup_boot_APIC_clock(void)
                     calibration_result / (1000000 / HZ),
                     calibration_result % (1000000 / HZ));
 
-        local_apic_timer_verify_ok = 1;
-
         /*
          * Do a sanity check on the APIC calibration result
          */
@@ -498,12 +470,11 @@ void __init setup_boot_APIC_clock(void)
                 local_irq_enable();
                 printk(KERN_WARNING
                        "APIC frequency too slow, disabling apic timer\n");
-                /* No broadcast on UP ! */
-                if (num_possible_cpus() > 1)
-                        setup_APIC_timer();
-                return;
+                return -1;
         }
 
+        local_apic_timer_verify_ok = 1;
+
         /* We trust the pm timer based calibration */
         if (!pm_referenced) {
                 apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
@@ -543,22 +514,55 @@ void __init setup_boot_APIC_clock(void)
         if (!local_apic_timer_verify_ok) {
                 printk(KERN_WARNING
                        "APIC timer disabled due to verification failure.\n");
+                        return -1;
+        }
+
+        return 0;
+}
+
+/*
+ * Setup the boot APIC
+ *
+ * Calibrate and verify the result.
+ */
+void __init setup_boot_APIC_clock(void)
+{
+        /*
+         * The local apic timer can be disabled via the kernel
+         * commandline or from the CPU detection code. Register the lapic
+         * timer as a dummy clock event source on SMP systems, so the
+         * broadcast mechanism is used. On UP systems simply ignore it.
+         */
+        if (local_apic_timer_disabled) {
                 /* No broadcast on UP ! */
-                if (num_possible_cpus() == 1)
-                        return;
-        } else {
-                /*
-                 * If nmi_watchdog is set to IO_APIC, we need the
-                 * PIT/HPET going.  Otherwise register lapic as a dummy
-                 * device.
-                 */
-                if (nmi_watchdog != NMI_IO_APIC)
-                        lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-                else
-                        printk(KERN_WARNING "APIC timer registered as dummy,"
-                                " due to nmi_watchdog=%d!\n", nmi_watchdog);
+                if (num_possible_cpus() > 1) {
+                        lapic_clockevent.mult = 1;
+                        setup_APIC_timer();
+                }
+                return;
         }
 
+        apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
+                    "calibrating APIC timer ...\n");
+
+        if (calibrate_APIC_clock()) {
+                /* No broadcast on UP ! */
+                if (num_possible_cpus() > 1)
+                        setup_APIC_timer();
+                return;
+        }
+
+        /*
+         * If nmi_watchdog is set to IO_APIC, we need the
+         * PIT/HPET going.  Otherwise register lapic as a dummy
+         * device.
+         */
+        if (nmi_watchdog != NMI_IO_APIC)
+                lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+        else
+                printk(KERN_WARNING "APIC timer registered as dummy,"
+                        " due to nmi_watchdog=%d!\n", nmi_watchdog);
+
         /* Setup the lapic or request the broadcast */
         setup_APIC_timer();
 }
@@ -693,44 +697,44 @@ void clear_local_APIC(void)
          */
         if (maxlvt >= 3) {
                 v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
-                apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
+                apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
         }
         /*
          * Careful: we have to set masks only first to deassert
          * any level-triggered sources.
          */
         v = apic_read(APIC_LVTT);
-        apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+        apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
         v = apic_read(APIC_LVT0);
-        apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+        apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
         v = apic_read(APIC_LVT1);
-        apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
+        apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
         if (maxlvt >= 4) {
                 v = apic_read(APIC_LVTPC);
-                apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
+                apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
         }
 
         /* lets not touch this if we didn't frob it */
 #ifdef CONFIG_X86_MCE_P4THERMAL
         if (maxlvt >= 5) {
                 v = apic_read(APIC_LVTTHMR);
-                apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+                apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
         }
 #endif
         /*
          * Clean APIC state for other OSs:
          */
-        apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
-        apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
-        apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
+        apic_write(APIC_LVTT, APIC_LVT_MASKED);
+        apic_write(APIC_LVT0, APIC_LVT_MASKED);
+        apic_write(APIC_LVT1, APIC_LVT_MASKED);
         if (maxlvt >= 3)
-                apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
+                apic_write(APIC_LVTERR, APIC_LVT_MASKED);
         if (maxlvt >= 4)
-                apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
+                apic_write(APIC_LVTPC, APIC_LVT_MASKED);
 
 #ifdef CONFIG_X86_MCE_P4THERMAL
         if (maxlvt >= 5)
-                apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
+                apic_write(APIC_LVTTHMR, APIC_LVT_MASKED);
 #endif
         /* Integrated APIC (!82489DX) ? */
         if (lapic_is_integrated()) {
@@ -756,7 +760,7 @@ void disable_local_APIC(void)
          */
         value = apic_read(APIC_SPIV);
         value &= ~APIC_SPIV_APIC_ENABLED;
-        apic_write_around(APIC_SPIV, value);
+        apic_write(APIC_SPIV, value);
 
         /*
          * When LAPIC was disabled by the BIOS and enabled by the kernel,
@@ -865,8 +869,8 @@ void __init sync_Arb_IDs(void)
         apic_wait_icr_idle();
 
         apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
-        apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
-                                | APIC_DM_INIT);
+        apic_write(APIC_ICR,
+                   APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
 }
 
 /*
@@ -902,16 +906,16 @@ void __init init_bsp_APIC(void)
         else
                 value |= APIC_SPIV_FOCUS_DISABLED;
         value |= SPURIOUS_APIC_VECTOR;
-        apic_write_around(APIC_SPIV, value);
+        apic_write(APIC_SPIV, value);
 
         /*
          * Set up the virtual wire mode.
          */
-        apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+        apic_write(APIC_LVT0, APIC_DM_EXTINT);
         value = APIC_DM_NMI;
         if (!lapic_is_integrated())             /* 82489DX */
                 value |= APIC_LVT_LEVEL_TRIGGER;
-        apic_write_around(APIC_LVT1, value);
+        apic_write(APIC_LVT1, value);
 }
 
 static void __cpuinit lapic_setup_esr(void)
@@ -926,7 +930,7 @@ static void __cpuinit lapic_setup_esr(void)
 
                 /* enables sending errors */
                 value = ERROR_APIC_VECTOR;
-                apic_write_around(APIC_LVTERR, value);
+                apic_write(APIC_LVTERR, value);
                 /*
                  * spec says clear errors after enabling vector.
                  */
@@ -989,7 +993,7 @@ void __cpuinit setup_local_APIC(void)
          */
         value = apic_read(APIC_TASKPRI);
         value &= ~APIC_TPRI_MASK;
-        apic_write_around(APIC_TASKPRI, value);
+        apic_write(APIC_TASKPRI, value);
 
         /*
          * After a crash, we no longer service the interrupts and a pending
@@ -1047,7 +1051,7 @@ void __cpuinit setup_local_APIC(void)
          * Set spurious IRQ vector
          */
         value |= SPURIOUS_APIC_VECTOR;
-        apic_write_around(APIC_SPIV, value);
+        apic_write(APIC_SPIV, value);
 
         /*
          * Set up LVT0, LVT1:
@@ -1069,7 +1073,7 @@ void __cpuinit setup_local_APIC(void)
                 apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
                                 smp_processor_id());
         }
-        apic_write_around(APIC_LVT0, value);
+        apic_write(APIC_LVT0, value);
 
         /*
          * only the BP should see the LINT1 NMI signal, obviously.
@@ -1080,7 +1084,7 @@ void __cpuinit setup_local_APIC(void)
                 value = APIC_DM_NMI | APIC_LVT_MASKED;
         if (!integrated)                /* 82489DX */
                 value |= APIC_LVT_LEVEL_TRIGGER;
-        apic_write_around(APIC_LVT1, value);
+        apic_write(APIC_LVT1, value);
 }
 
 void __cpuinit end_local_APIC_setup(void)
@@ -1091,7 +1095,7 @@ void __cpuinit end_local_APIC_setup(void)
         /* Disable the local apic timer */
         value = apic_read(APIC_LVTT);
         value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-        apic_write_around(APIC_LVTT, value);
+        apic_write(APIC_LVTT, value);
 
         setup_apic_nmi_watchdog(NULL);
         apic_pm_activate();
@@ -1214,9 +1218,6 @@ int apic_version[MAX_APICS];
 
 int __init APIC_init_uniprocessor(void)
 {
-        if (disable_apic)
-                clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
-
         if (!smp_found_config && !cpu_has_apic)
                 return -1;
 
@@ -1419,7 +1420,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
                 value &= ~APIC_VECTOR_MASK;
                 value |= APIC_SPIV_APIC_ENABLED;
                 value |= 0xf;
-                apic_write_around(APIC_SPIV, value);
+                apic_write(APIC_SPIV, value);
 
                 if (!virt_wire_setup) {
                         /*
@@ -1432,10 +1433,10 @@ void disconnect_bsp_APIC(int virt_wire_setup)
                                 APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
                         value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
                         value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
-                        apic_write_around(APIC_LVT0, value);
+                        apic_write(APIC_LVT0, value);
                 } else {
                         /* Disable LVT0 */
-                        apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
+                        apic_write(APIC_LVT0, APIC_LVT_MASKED);
                 }
 
                 /*
@@ -1449,7 +1450,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
                         APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
                 value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
                 value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
-                apic_write_around(APIC_LVT1, value);
+                apic_write(APIC_LVT1, value);
         }
 }
 
@@ -1700,7 +1701,7 @@ early_param("lapic", parse_lapic);
 static int __init parse_nolapic(char *arg)
 {
         disable_apic = 1;
-        clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+        setup_clear_cpu_cap(X86_FEATURE_APIC);
         return 0;
 }
 early_param("nolapic", parse_nolapic);
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 1e3d32e27c14..7f1f030da7ee 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -54,7 +54,7 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
 /*
  * Debug level, exported for io_apic.c
  */
-int apic_verbosity;
+unsigned int apic_verbosity;
 
 /* Have we found an MP table */
 int smp_found_config;
@@ -314,7 +314,7 @@ static void setup_APIC_timer(void)
 
 #define TICK_COUNT 100000000
 
-static void __init calibrate_APIC_clock(void)
+static int __init calibrate_APIC_clock(void)
 {
         unsigned apic, apic_start;
         unsigned long tsc, tsc_start;
@@ -368,6 +368,17 @@ static void __init calibrate_APIC_clock(void)
                 clockevent_delta2ns(0xF, &lapic_clockevent);
 
         calibration_result = result / HZ;
+
+        /*
+         * Do a sanity check on the APIC calibration result
+         */
+        if (calibration_result < (1000000 / HZ)) {
+                printk(KERN_WARNING
+                        "APIC frequency too slow, disabling apic timer\n");
+                return -1;
+        }
+
+        return 0;
 }
 
 /*
@@ -394,14 +405,7 @@ void __init setup_boot_APIC_clock(void)
         }
 
         printk(KERN_INFO "Using local APIC timer interrupts.\n");
-        calibrate_APIC_clock();
-
-        /*
-         * Do a sanity check on the APIC calibration result
-         */
-        if (calibration_result < (1000000 / HZ)) {
-                printk(KERN_WARNING
-                       "APIC frequency too slow, disabling apic timer\n");
+        if (calibrate_APIC_clock()) {
                 /* No broadcast on UP ! */
                 if (num_possible_cpus() > 1)
                         setup_APIC_timer();
@@ -1337,7 +1341,7 @@ early_param("apic", apic_set_verbosity);
 static __init int setup_disableapic(char *str)
 {
         disable_apic = 1;
-        clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+        setup_clear_cpu_cap(X86_FEATURE_APIC);
         return 0;
 }
 early_param("disableapic", setup_disableapic);
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index bf9b441331e9..9ee24e6bc4b0 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -219,7 +219,6 @@
 #include <linux/time.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/capability.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index bacf5deeec2d..aa89387006fe 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -18,6 +18,8 @@
 #include <asm/ia32.h>
 #include <asm/bootparam.h>
 
+#include <xen/interface/xen.h>
+
 #define __NO_STUBS 1
 #undef __SYSCALL
 #undef _ASM_X86_64_UNISTD_H_
@@ -131,5 +133,14 @@ int main(void)
         OFFSET(BP_loadflags, boot_params, hdr.loadflags);
         OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
         OFFSET(BP_version, boot_params, hdr.version);
+
+        BLANK();
+        DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
+#ifdef CONFIG_XEN
+        BLANK();
+        OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask);
+        OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
+#undef ENTRY
+#endif
         return 0;
 }
diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c
new file mode 100644
index 000000000000..c639bd55391c
--- /dev/null
+++ b/arch/x86/kernel/bios_uv.c
@@ -0,0 +1,48 @@
+/*
+ * BIOS run time interface routines.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <asm/uv/bios.h>
+
+const char *
+x86_bios_strerror(long status)
+{
+        const char *str;
+        switch (status) {
+        case  0: str = "Call completed without error"; break;
+        case -1: str = "Not implemented"; break;
+        case -2: str = "Invalid argument"; break;
+        case -3: str = "Call completed with error"; break;
+        default: str = "Unknown BIOS status code"; break;
+        }
+        return str;
+}
+
+long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+                   unsigned long *drift_info)
+{
+        struct uv_bios_retval isrv;
+
+        BIOS_CALL(isrv, BIOS_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
+        *ticks_per_second = isrv.v0;
+        *drift_info = isrv.v1;
+        return isrv.status;
+}
+EXPORT_SYMBOL_GPL(x86_bios_freq_base);
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 81a07ca65d44..cae9cabc3031 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -24,8 +24,6 @@
 extern void vide(void);
 __asm__(".align 4\nvide: ret");
 
-int force_mwait __cpuinitdata;
-
 static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 {
         if (cpuid_eax(0x80000000) >= 0x80000007) {
diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c
index 7c36fb8a28d4..d1692b2a41ff 100644
--- a/arch/x86/kernel/cpu/amd_64.c
+++ b/arch/x86/kernel/cpu/amd_64.c
@@ -115,6 +115,8 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
         /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
         if (c->x86_power & (1<<8))
                 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+        set_cpu_cap(c, X86_FEATURE_SYSCALL32);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 1b1c56bb338f..c9b58a806e85 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -131,13 +131,7 @@ static void __init check_popad(void)
  *   (for due to lack of "invlpg" and working WP on a i386)
  * - In order to run on anything without a TSC, we need to be
  *   compiled for a i486.
- * - In order to support the local APIC on a buggy Pentium machine,
- *   we need to be compiled with CONFIG_X86_GOOD_APIC disabled,
- *   which happens implicitly if compiled for a Pentium or lower
- *   (unless an advanced selection of CPU features is used) as an
- *   otherwise config implies a properly working local APIC without
- *   the need to do extra reads from the APIC.
-*/
+ */
 
 static void __init check_config(void)
 {
@@ -151,21 +145,6 @@ static void __init check_config(void)
         if (boot_cpu_data.x86 == 3)
                 panic("Kernel requires i486+ for 'invlpg' and other features");
 #endif
-
-/*
- * If we were told we had a good local APIC, check for buggy Pentia,
- * i.e. all B steppings and the C2 stepping of P54C when using their
- * integrated APIC (see 11AP erratum in "Pentium Processor
- * Specification Update").
- */
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC)
-        if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL
-            && cpu_has_apic
-            && boot_cpu_data.x86 == 5
-            && boot_cpu_data.x86_model == 2
-            && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11))
-                panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!");
-#endif
 }
 
 
diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
index 7b8cc72feb40..dd6e3f15017e 100644
--- a/arch/x86/kernel/cpu/common_64.c
+++ b/arch/x86/kernel/cpu/common_64.c
@@ -7,15 +7,13 @@
 #include <linux/module.h>
 #include <linux/kgdb.h>
 #include <linux/topology.h>
-#include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/smp.h>
-#include <linux/module.h>
 #include <linux/percpu.h>
-#include <asm/processor.h>
 #include <asm/i387.h>
 #include <asm/msr.h>
 #include <asm/io.h>
+#include <asm/linkage.h>
 #include <asm/mmu_context.h>
 #include <asm/mtrr.h>
 #include <asm/mce.h>
@@ -305,7 +303,6 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
                         c->x86_capability[2] = cpuid_edx(0x80860001);
         }
 
-        c->extended_cpuid_level = cpuid_eax(0x80000000);
         if (c->extended_cpuid_level >= 0x80000007)
                 c->x86_power = cpuid_edx(0x80000007);
 
@@ -316,18 +313,11 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
                 c->x86_phys_bits = eax & 0xff;
         }
 
-        /* Assume all 64-bit CPUs support 32-bit syscall */
-        set_cpu_cap(c, X86_FEATURE_SYSCALL32);
-
         if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
             cpu_devs[c->x86_vendor]->c_early_init)
                 cpu_devs[c->x86_vendor]->c_early_init(c);
 
         validate_pat_support(c);
-
-        /* early_param could clear that, but recall get it set again */
-        if (disable_apic)
-                clear_cpu_cap(c, X86_FEATURE_APIC);
 }
 
 /*
@@ -517,8 +507,7 @@ void pda_init(int cpu)
 }
 
 char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
-                           DEBUG_STKSZ]
-__attribute__((section(".bss.page_aligned")));
+                           DEBUG_STKSZ] __page_aligned_bss;
 
 extern asmlinkage void ignore_sysret(void);
 
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index b0c8208df9fa..ff2fff56f0a8 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -200,10 +200,12 @@ static void drv_read(struct drv_cmd *cmd)
 static void drv_write(struct drv_cmd *cmd)
 {
         cpumask_t saved_mask = current->cpus_allowed;
+        cpumask_of_cpu_ptr_declare(cpu_mask);
         unsigned int i;
 
-        for_each_cpu_mask(i, cmd->mask) {
-                set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
+        for_each_cpu_mask_nr(i, cmd->mask) {
+                cpumask_of_cpu_ptr_next(cpu_mask, i);
+                set_cpus_allowed_ptr(current, cpu_mask);
                 do_drv_write(cmd);
         }
 
@@ -267,11 +269,12 @@ static unsigned int get_measured_perf(unsigned int cpu)
         } aperf_cur, mperf_cur;
 
         cpumask_t saved_mask;
+        cpumask_of_cpu_ptr(cpu_mask, cpu);
         unsigned int perf_percent;
         unsigned int retval;
 
         saved_mask = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+        set_cpus_allowed_ptr(current, cpu_mask);
         if (get_cpu() != cpu) {
                 /* We were not able to run on requested processor */
                 put_cpu();
@@ -337,6 +340,7 @@ static unsigned int get_measured_perf(unsigned int cpu)
 
 static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 {
+        cpumask_of_cpu_ptr(cpu_mask, cpu);
         struct acpi_cpufreq_data *data = per_cpu(drv_data, cpu);
         unsigned int freq;
         unsigned int cached_freq;
@@ -349,7 +353,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
         }
 
         cached_freq = data->freq_table[data->acpi_data->state].frequency;
-        freq = extract_freq(get_cur_val(&cpumask_of_cpu(cpu)), data);
+        freq = extract_freq(get_cur_val(cpu_mask), data);
         if (freq != cached_freq) {
                 /*
                  * The dreaded BIOS frequency change behind our back.
@@ -451,7 +455,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
         freqs.old = perf->states[perf->state].core_frequency * 1000;
         freqs.new = data->freq_table[next_state].frequency;
-        for_each_cpu_mask(i, cmd.mask) {
+        for_each_cpu_mask_nr(i, cmd.mask) {
                 freqs.cpu = i;
                 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
         }
@@ -466,7 +470,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
                 }
         }
 
-        for_each_cpu_mask(i, cmd.mask) {
+        for_each_cpu_mask_nr(i, cmd.mask) {
                 freqs.cpu = i;
                 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
         }
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 199e4e05e5dc..f1685fb91fbd 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -122,7 +122,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
                 return 0;
 
         /* notifiers */
-        for_each_cpu_mask(i, policy->cpus) {
+        for_each_cpu_mask_nr(i, policy->cpus) {
                 freqs.cpu = i;
                 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
         }
@@ -130,11 +130,11 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
         /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
          * Developer's Manual, Volume 3
          */
-        for_each_cpu_mask(i, policy->cpus)
+        for_each_cpu_mask_nr(i, policy->cpus)
                 cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
 
         /* notifiers */
-        for_each_cpu_mask(i, policy->cpus) {
+        for_each_cpu_mask_nr(i, policy->cpus) {
                 freqs.cpu = i;
                 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
         }
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
index f8a63b3664e3..35fb4eaf6e1c 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
@@ -1,5 +1,4 @@
 /*
- *  $Id: powernow-k7.h,v 1.2 2003/02/10 18:26:01 davej Exp $
  *  (C) 2003 Dave Jones.
  *
  *  Licensed under the terms of the GNU GPL License version 2.
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 206791eb46e3..53c7b6936973 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -479,11 +479,12 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 static int check_supported_cpu(unsigned int cpu)
 {
         cpumask_t oldmask;
+        cpumask_of_cpu_ptr(cpu_mask, cpu);
         u32 eax, ebx, ecx, edx;
         unsigned int rc = 0;
 
         oldmask = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+        set_cpus_allowed_ptr(current, cpu_mask);
 
         if (smp_processor_id() != cpu) {
                 printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
@@ -966,7 +967,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
         freqs.old = find_khz_freq_from_fid(data->currfid);
         freqs.new = find_khz_freq_from_fid(fid);
 
-        for_each_cpu_mask(i, *(data->available_cores)) {
+        for_each_cpu_mask_nr(i, *(data->available_cores)) {
                 freqs.cpu = i;
                 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
         }
@@ -974,7 +975,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
         res = transition_fid_vid(data, fid, vid);
         freqs.new = find_khz_freq_from_fid(data->currfid);
 
-        for_each_cpu_mask(i, *(data->available_cores)) {
+        for_each_cpu_mask_nr(i, *(data->available_cores)) {
                 freqs.cpu = i;
                 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
         }
@@ -997,7 +998,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
         freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
         freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
-        for_each_cpu_mask(i, *(data->available_cores)) {
+        for_each_cpu_mask_nr(i, *(data->available_cores)) {
                 freqs.cpu = i;
                 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
         }
@@ -1005,7 +1006,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
         res = transition_pstate(data, pstate);
         freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
-        for_each_cpu_mask(i, *(data->available_cores)) {
+        for_each_cpu_mask_nr(i, *(data->available_cores)) {
                 freqs.cpu = i;
                 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
         }
@@ -1016,6 +1017,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
 {
         cpumask_t oldmask;
+        cpumask_of_cpu_ptr(cpu_mask, pol->cpu);
         struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
         u32 checkfid;
         u32 checkvid;
@@ -1030,7 +1032,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 
         /* only run on specific CPU from here on */
         oldmask = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
+        set_cpus_allowed_ptr(current, cpu_mask);
 
         if (smp_processor_id() != pol->cpu) {
                 printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1105,6 +1107,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
         struct powernow_k8_data *data;
         cpumask_t oldmask;
+        cpumask_of_cpu_ptr_declare(newmask);
         int rc;
 
         if (!cpu_online(pol->cpu))
@@ -1156,7 +1159,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
         /* only run on specific CPU from here on */
         oldmask = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
+        cpumask_of_cpu_ptr_next(newmask, pol->cpu);
+        set_cpus_allowed_ptr(current, newmask);
 
         if (smp_processor_id() != pol->cpu) {
                 printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1178,7 +1182,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
         set_cpus_allowed_ptr(current, &oldmask);
 
         if (cpu_family == CPU_HW_PSTATE)
-                pol->cpus = cpumask_of_cpu(pol->cpu);
+                pol->cpus = *newmask;
         else
                 pol->cpus = per_cpu(cpu_core_map, pol->cpu);
         data->available_cores = &(pol->cpus);
@@ -1244,6 +1248,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
 {
         struct powernow_k8_data *data;
         cpumask_t oldmask = current->cpus_allowed;
+        cpumask_of_cpu_ptr(newmask, cpu);
         unsigned int khz = 0;
         unsigned int first;
 
@@ -1253,7 +1258,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
         if (!data)
                 return -EINVAL;
 
-        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+        set_cpus_allowed_ptr(current, newmask);
         if (smp_processor_id() != cpu) {
                 printk(KERN_ERR PFX
                         "limiting to CPU %d failed in powernowk8_get\n", cpu);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 908dd347c67e..ca2ac13b7af2 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -28,7 +28,8 @@
 #define PFX             "speedstep-centrino: "
 #define MAINTAINER      "cpufreq@lists.linux.org.uk"
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+#define dprintk(msg...) \
+        cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
 
 #define INTEL_MSR_RANGE (0xffff)
 
@@ -66,11 +67,12 @@ struct cpu_model
 
         struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
 };
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x);
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+                                  const struct cpu_id *x);
 
 /* Operating points for current CPU */
-static struct cpu_model *centrino_model[NR_CPUS];
-static const struct cpu_id *centrino_cpu[NR_CPUS];
+static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
+static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
 
 static struct cpufreq_driver centrino_driver;
 
@@ -255,7 +257,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
                 return -ENOENT;
         }
 
-        centrino_model[policy->cpu] = model;
+        per_cpu(centrino_model, policy->cpu) = model;
 
         dprintk("found \"%s\": max frequency: %dkHz\n",
                model->model_name, model->max_freq);
@@ -264,10 +266,14 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 }
 
 #else
-static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; }
+static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+        return -ENODEV;
+}
 #endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
 
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x)
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+                                  const struct cpu_id *x)
 {
         if ((c->x86 == x->x86) &&
             (c->x86_model == x->x86_model) &&
@@ -286,23 +292,28 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
          * for centrino, as some DSDTs are buggy.
          * Ideally, this can be done using the acpi_data structure.
          */
-        if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) ||
-            (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) ||
-            (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) {
+        if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
+            (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
+            (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
                 msr = (msr >> 8) & 0xff;
                 return msr * 100000;
         }
 
-        if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points))
+        if ((!per_cpu(centrino_model, cpu)) ||
+            (!per_cpu(centrino_model, cpu)->op_points))
                 return 0;
 
         msr &= 0xffff;
-        for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) {
-                if (msr == centrino_model[cpu]->op_points[i].index)
-                        return centrino_model[cpu]->op_points[i].frequency;
+        for (i = 0;
+                per_cpu(centrino_model, cpu)->op_points[i].frequency
+                                                        != CPUFREQ_TABLE_END;
+             i++) {
+                if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
+                        return per_cpu(centrino_model, cpu)->
+                                                        op_points[i].frequency;
         }
         if (failsafe)
-                return centrino_model[cpu]->op_points[i-1].frequency;
+                return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
         else
                 return 0;
 }
@@ -313,9 +324,10 @@ static unsigned int get_cur_freq(unsigned int cpu)
         unsigned l, h;
         unsigned clock_freq;
         cpumask_t saved_mask;
+        cpumask_of_cpu_ptr(new_mask, cpu);
 
         saved_mask = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+        set_cpus_allowed_ptr(current, new_mask);
         if (smp_processor_id() != cpu)
                 return 0;
 
@@ -347,7 +359,8 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
         int i;
 
         /* Only Intel makes Enhanced Speedstep-capable CPUs */
-        if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST))
+        if (cpu->x86_vendor != X86_VENDOR_INTEL ||
+            !cpu_has(cpu, X86_FEATURE_EST))
                 return -ENODEV;
 
         if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
@@ -361,9 +374,9 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
                         break;
 
         if (i != N_IDS)
-                centrino_cpu[policy->cpu] = &cpu_ids[i];
+                per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
 
-        if (!centrino_cpu[policy->cpu]) {
+        if (!per_cpu(centrino_cpu, policy->cpu)) {
                 dprintk("found unsupported CPU with "
                 "Enhanced SpeedStep: send /proc/cpuinfo to "
                 MAINTAINER "\n");
@@ -386,23 +399,26 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
                 /* check to see if it stuck */
                 rdmsr(MSR_IA32_MISC_ENABLE, l, h);
                 if (!(l & (1<<16))) {
-                        printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n");
+                        printk(KERN_INFO PFX
+                                "couldn't enable Enhanced SpeedStep\n");
                         return -ENODEV;
                 }
         }
 
         freq = get_cur_freq(policy->cpu);
-
-        policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */
+        policy->cpuinfo.transition_latency = 10000;
+                                                /* 10uS transition latency */
         policy->cur = freq;
 
         dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
 
-        ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points);
+        ret = cpufreq_frequency_table_cpuinfo(policy,
+                per_cpu(centrino_model, policy->cpu)->op_points);
         if (ret)
                 return (ret);
 
-        cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu);
+        cpufreq_frequency_table_get_attr(
+                per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu);
 
         return 0;
 }
@@ -411,12 +427,12 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
 {
         unsigned int cpu = policy->cpu;
 
-        if (!centrino_model[cpu])
+        if (!per_cpu(centrino_model, cpu))
                 return -ENODEV;
 
         cpufreq_frequency_table_put_attr(cpu);
 
-        centrino_model[cpu] = NULL;
+        per_cpu(centrino_model, cpu) = NULL;
 
         return 0;
 }
@@ -430,17 +446,26 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
  */
 static int centrino_verify (struct cpufreq_policy *policy)
 {
-        return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points);
+        return cpufreq_frequency_table_verify(policy,
+                        per_cpu(centrino_model, policy->cpu)->op_points);
 }
 
 /**
  * centrino_setpolicy - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *      (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * Sets a new CPUFreq policy.
  */
+struct allmasks {
+        cpumask_t               online_policy_cpus;
+        cpumask_t               saved_mask;
+        cpumask_t               set_mask;
+        cpumask_t               covered_cpus;
+};
+
 static int centrino_target (struct cpufreq_policy *policy,
                             unsigned int target_freq,
                             unsigned int relation)
@@ -448,48 +473,55 @@ static int centrino_target (struct cpufreq_policy *policy,
         unsigned int    newstate = 0;
         unsigned int    msr, oldmsr = 0, h = 0, cpu = policy->cpu;
         struct cpufreq_freqs    freqs;
-        cpumask_t               online_policy_cpus;
-        cpumask_t               saved_mask;
-        cpumask_t               set_mask;
-        cpumask_t               covered_cpus;
         int                     retval = 0;
         unsigned int            j, k, first_cpu, tmp;
-
-        if (unlikely(centrino_model[cpu] == NULL))
-                return -ENODEV;
+        CPUMASK_ALLOC(allmasks);
+        CPUMASK_PTR(online_policy_cpus, allmasks);
+        CPUMASK_PTR(saved_mask, allmasks);
+        CPUMASK_PTR(set_mask, allmasks);
+        CPUMASK_PTR(covered_cpus, allmasks);
+
+        if (unlikely(allmasks == NULL))
+                return -ENOMEM;
+
+        if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
+                retval = -ENODEV;
+                goto out;
+        }
 
         if (unlikely(cpufreq_frequency_table_target(policy,
-                        centrino_model[cpu]->op_points,
+                        per_cpu(centrino_model, cpu)->op_points,
                         target_freq,
                         relation,
                         &newstate))) {
-                return -EINVAL;
+                retval = -EINVAL;
+                goto out;
         }
 
 #ifdef CONFIG_HOTPLUG_CPU
         /* cpufreq holds the hotplug lock, so we are safe from here on */
-        cpus_and(online_policy_cpus, cpu_online_map, policy->cpus);
+        cpus_and(*online_policy_cpus, cpu_online_map, policy->cpus);
 #else
-        online_policy_cpus = policy->cpus;
+        *online_policy_cpus = policy->cpus;
 #endif
 
-        saved_mask = current->cpus_allowed;
+        *saved_mask = current->cpus_allowed;
         first_cpu = 1;
-        cpus_clear(covered_cpus);
-        for_each_cpu_mask(j, online_policy_cpus) {
+        cpus_clear(*covered_cpus);
+        for_each_cpu_mask_nr(j, *online_policy_cpus) {
                 /*
                  * Support for SMP systems.
                  * Make sure we are running on CPU that wants to change freq
                  */
-                cpus_clear(set_mask);
+                cpus_clear(*set_mask);
                 if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-                        cpus_or(set_mask, set_mask, online_policy_cpus);
+                        cpus_or(*set_mask, *set_mask, *online_policy_cpus);
                 else
-                        cpu_set(j, set_mask);
+                        cpu_set(j, *set_mask);
 
-                set_cpus_allowed_ptr(current, &set_mask);
+                set_cpus_allowed_ptr(current, set_mask);
                 preempt_disable();
-                if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
+                if (unlikely(!cpu_isset(smp_processor_id(), *set_mask))) {
                         dprintk("couldn't limit to CPUs in this domain\n");
                         retval = -EAGAIN;
                         if (first_cpu) {
@@ -500,7 +532,7 @@ static int centrino_target (struct cpufreq_policy *policy,
                         break;
                 }
 
-                msr = centrino_model[cpu]->op_points[newstate].index;
+                msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
 
                 if (first_cpu) {
                         rdmsr(MSR_IA32_PERF_CTL, oldmsr, h);
@@ -517,7 +549,7 @@ static int centrino_target (struct cpufreq_policy *policy,
                         dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
                                 target_freq, freqs.old, freqs.new, msr);
 
-                        for_each_cpu_mask(k, online_policy_cpus) {
+                        for_each_cpu_mask_nr(k, *online_policy_cpus) {
                                 freqs.cpu = k;
                                 cpufreq_notify_transition(&freqs,
                                         CPUFREQ_PRECHANGE);
@@ -536,11 +568,11 @@ static int centrino_target (struct cpufreq_policy *policy,
                         break;
                 }
 
-                cpu_set(j, covered_cpus);
+                cpu_set(j, *covered_cpus);
                 preempt_enable();
         }
 
-        for_each_cpu_mask(k, online_policy_cpus) {
+        for_each_cpu_mask_nr(k, *online_policy_cpus) {
                 freqs.cpu = k;
                 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
         }
@@ -553,10 +585,12 @@ static int centrino_target (struct cpufreq_policy *policy,
                  * Best effort undo..
                  */
 
-                if (!cpus_empty(covered_cpus)) {
-                        for_each_cpu_mask(j, covered_cpus) {
-                                set_cpus_allowed_ptr(current,
-                                                     &cpumask_of_cpu(j));
+                if (!cpus_empty(*covered_cpus)) {
+                        cpumask_of_cpu_ptr_declare(new_mask);
+
+                        for_each_cpu_mask_nr(j, *covered_cpus) {
+                                cpumask_of_cpu_ptr_next(new_mask, j);
+                                set_cpus_allowed_ptr(current, new_mask);
                                 wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
                         }
                 }
@@ -564,19 +598,22 @@ static int centrino_target (struct cpufreq_policy *policy,
                 tmp = freqs.new;
                 freqs.new = freqs.old;
                 freqs.old = tmp;
-                for_each_cpu_mask(j, online_policy_cpus) {
+                for_each_cpu_mask_nr(j, *online_policy_cpus) {
                         freqs.cpu = j;
                         cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
                         cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
                 }
         }
-        set_cpus_allowed_ptr(current, &saved_mask);
-        return 0;
+        set_cpus_allowed_ptr(current, saved_mask);
+        retval = 0;
+        goto out;
 
 migrate_end:
         preempt_enable();
-        set_cpus_allowed_ptr(current, &saved_mask);
-        return 0;
+        set_cpus_allowed_ptr(current, saved_mask);
+out:
+        CPUMASK_FREE(allmasks);
+        return retval;
 }
 
 static struct freq_attr* centrino_attr[] = {
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 1b50244b1fdf..2f3728dc24f6 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -244,7 +244,8 @@ static unsigned int _speedstep_get(const cpumask_t *cpus)
 
 static unsigned int speedstep_get(unsigned int cpu)
 {
-        return _speedstep_get(&cpumask_of_cpu(cpu));
+        cpumask_of_cpu_ptr(newmask, cpu);
+        return _speedstep_get(newmask);
 }
 
 /**
@@ -279,7 +280,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
 
         cpus_allowed = current->cpus_allowed;
 
-        for_each_cpu_mask(i, policy->cpus) {
+        for_each_cpu_mask_nr(i, policy->cpus) {
                 freqs.cpu = i;
                 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
         }
@@ -292,7 +293,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
         /* allow to be run on all CPUs */
         set_cpus_allowed_ptr(current, &cpus_allowed);
 
-        for_each_cpu_mask(i, policy->cpus) {
+        for_each_cpu_mask_nr(i, policy->cpus) {
                 freqs.cpu = i;
                 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
         }
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 70609efdf1da..b75f2569b8f8 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -227,6 +227,16 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
         if (cpu_has_bts)
                 ds_init_intel(c);
 
+        /*
+         * See if we have a good local APIC by checking for buggy Pentia,
+         * i.e. all B steppings and the C2 stepping of P54C when using their
+         * integrated APIC (see 11AP erratum in "Pentium Processor
+         * Specification Update").
+         */
+        if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
+            (c->x86_mask < 0x6 || c->x86_mask == 0xb))
+                set_cpu_cap(c, X86_FEATURE_11AP);
+
 #ifdef CONFIG_X86_NUMAQ
         numaq_tsc_disable();
 #endif
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 2c8afafa18e8..650d40f7912b 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -489,7 +489,7 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
         int sibling;
 
         this_leaf = CPUID4_INFO_IDX(cpu, index);
-        for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) {
+        for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) {
                 sibling_leaf = CPUID4_INFO_IDX(sibling, index); 
                 cpu_clear(cpu, sibling_leaf->shared_cpu_map);
         }
@@ -516,6 +516,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
         unsigned long           j;
         int                     retval;
         cpumask_t               oldmask;
+        cpumask_of_cpu_ptr(newmask, cpu);
 
         if (num_cache_leaves == 0)
                 return -ENOENT;
@@ -526,7 +527,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
                 return -ENOMEM;
 
         oldmask = current->cpus_allowed;
-        retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+        retval = set_cpus_allowed_ptr(current, newmask);
         if (retval)
                 goto out;
 
@@ -780,15 +781,14 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
                         }
                         kobject_put(per_cpu(cache_kobject, cpu));
                         cpuid4_cache_sysfs_exit(cpu);
-                        break;
+                        return retval;
                 }
                 kobject_uevent(&(this_object->kobj), KOBJ_ADD);
         }
-        if (!retval)
-                cpu_set(cpu, cache_dev_map);
+        cpu_set(cpu, cache_dev_map);
 
         kobject_uevent(per_cpu(cache_kobject, cpu), KOBJ_ADD);
-        return retval;
+        return 0;
 }
 
 static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index c4a7ec31394c..65a339678ece 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -580,7 +580,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
         char __user *buf = ubuf;
         int i, err;
 
-        cpu_tsc = kmalloc(NR_CPUS * sizeof(long), GFP_KERNEL);
+        cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
         if (!cpu_tsc)
                 return -ENOMEM;
 
@@ -762,10 +762,14 @@ DEFINE_PER_CPU(struct sys_device, device_mce);
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
-        static ssize_t show_ ## name(struct sys_device *s, char *buf) { \
+        static ssize_t show_ ## name(struct sys_device *s,              \
+                                     struct sysdev_attribute *attr,     \
+                                     char *buf) {                       \
                 return sprintf(buf, "%lx\n", (unsigned long)var);       \
         }                                                               \
-        static ssize_t set_ ## name(struct sys_device *s,const char *buf,size_t siz) { \
+        static ssize_t set_ ## name(struct sys_device *s,               \
+                                    struct sysdev_attribute *attr,      \
+                                    const char *buf, size_t siz) {      \
                 char *end;                                              \
                 unsigned long new = simple_strtoul(buf, &end, 0);       \
                 if (end == buf) return -EINVAL;                         \
@@ -786,14 +790,16 @@ ACCESSOR(bank3ctl,bank[3],mce_restart())
 ACCESSOR(bank4ctl,bank[4],mce_restart())
 ACCESSOR(bank5ctl,bank[5],mce_restart())
 
-static ssize_t show_trigger(struct sys_device *s, char *buf)
+static ssize_t show_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+                                char *buf)
 {
         strcpy(buf, trigger);
         strcat(buf, "\n");
         return strlen(trigger) + 1;
 }
 
-static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz)
+static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+                                const char *buf,size_t siz)
 {
         char *p;
         int len;
@@ -806,12 +812,12 @@ static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz)
 }
 
 static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-ACCESSOR(tolerant,tolerant,)
+static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
 ACCESSOR(check_interval,check_interval,mce_restart())
 static struct sysdev_attribute *mce_attributes[] = {
         &attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl,
         &attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl,
-        &attr_tolerant, &attr_check_interval, &attr_trigger,
+        &attr_tolerant.attr, &attr_check_interval, &attr_trigger,
         NULL
 };
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 7c9a813e1193..88736cadbaa6 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -527,7 +527,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
         if (err)
                 goto out_free;
 
-        for_each_cpu_mask(i, b->cpus) {
+        for_each_cpu_mask_nr(i, b->cpus) {
                 if (i == cpu)
                         continue;
 
@@ -617,7 +617,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 #endif
 
         /* remove all sibling symlinks before unregistering */
-        for_each_cpu_mask(i, b->cpus) {
+        for_each_cpu_mask_nr(i, b->cpus) {
                 if (i == cpu)
                         continue;
 
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index eef001ad3bde..9b60fce09f75 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -102,7 +102,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
         /* The temperature transition interrupt handler setup */
         h = THERMAL_APIC_VECTOR;                /* our delivery vector */
         h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */
-        apic_write_around(APIC_LVTTHMR, h);
+        apic_write(APIC_LVTTHMR, h);
 
         rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
         wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
@@ -114,7 +114,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
         wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h);
 
         l = apic_read(APIC_LVTTHMR);
-        apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+        apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
         printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
 
         /* enable thermal throttle processing */
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 1f4cc48c14c6..d5ae2243f0b9 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -35,6 +35,7 @@ atomic_t therm_throt_en = ATOMIC_INIT(0);
 
 #define define_therm_throt_sysdev_show_func(name)                            \
 static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,        \
+                                        struct sysdev_attribute *attr,       \
                                               char *buf)                     \
 {                                                                            \
         unsigned int cpu = dev->id;                                          \
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 6d4bdc02388a..de7439f82b92 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -250,7 +250,7 @@ static void write_watchdog_counter(unsigned int perfctr_msr,
 
         do_div(count, nmi_hz);
         if(descr)
-                Dprintk("setting %s to -0x%08Lx\n", descr, count);
+                pr_debug("setting %s to -0x%08Lx\n", descr, count);
         wrmsrl(perfctr_msr, 0 - count);
 }
 
@@ -261,7 +261,7 @@ static void write_watchdog_counter32(unsigned int perfctr_msr,
 
         do_div(count, nmi_hz);
         if(descr)
-                Dprintk("setting %s to -0x%08Lx\n", descr, count);
+                pr_debug("setting %s to -0x%08Lx\n", descr, count);
         wrmsr(perfctr_msr, (u32)(-count), 0);
 }
 
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 0d0d9057e7c0..a26c480b9491 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -160,7 +160,7 @@ static void *c_start(struct seq_file *m, loff_t *pos)
 {
         if (*pos == 0)  /* just in case, cpu 0 is not the first */
                 *pos = first_cpu(cpu_online_map);
-        if ((*pos) < NR_CPUS && cpu_online(*pos))
+        if ((*pos) < nr_cpu_ids && cpu_online(*pos))
                 return &cpu_data(*pos);
         return NULL;
 }
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 2de5fa2bbf77..14b11b3be31c 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -141,8 +141,8 @@ static __cpuinit int cpuid_device_create(int cpu)
 {
         struct device *dev;
 
-        dev = device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
-                            "cpu%d", cpu);
+        dev = device_create_drvdata(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
+                                    NULL, "cpu%d", cpu);
         return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 28c29180b380..9af89078f7bb 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -877,7 +877,8 @@ void __init early_res_to_bootmem(u64 start, u64 end)
         for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++)
                 count++;
 
-        printk(KERN_INFO "(%d early reservations) ==> bootmem\n", count);
+        printk(KERN_INFO "(%d early reservations) ==> bootmem [%010llx - %010llx]\n",
+                         count, start, end);
         for (i = 0; i < count; i++) {
                 struct early_res *r = &early_res[i];
                 printk(KERN_INFO "  #%d [%010llx - %010llx] %16s", i,
@@ -1298,11 +1299,6 @@ void __init e820_reserve_resources(void)
         }
 }
 
-/*
- * Non-standard memory setup can be specified via this quirk:
- */
-char * (*arch_memory_setup_quirk)(void);
-
 char *__init default_machine_specific_memory_setup(void)
 {
         char *who = "BIOS-e820";
@@ -1343,8 +1339,8 @@ char *__init default_machine_specific_memory_setup(void)
 
 char *__init __attribute__((weak)) machine_specific_memory_setup(void)
 {
-        if (arch_memory_setup_quirk) {
-                char *who = arch_memory_setup_quirk();
+        if (x86_quirks->arch_memory_setup) {
+                char *who = x86_quirks->arch_memory_setup();
 
                 if (who)
                         return who;
@@ -1367,24 +1363,3 @@ void __init setup_memory_map(void)
         printk(KERN_INFO "BIOS-provided physical RAM map:\n");
         e820_print_map(who);
 }
-
-#ifdef CONFIG_X86_64
-int __init arch_get_ram_range(int slot, u64 *addr, u64 *size)
-{
-        int i;
-
-        if (slot < 0 || slot >= e820.nr_map)
-                return -1;
-        for (i = slot; i < e820.nr_map; i++) {
-                if (e820.map[i].type != E820_RAM)
-                        continue;
-                break;
-        }
-        if (i == e820.nr_map || e820.map[i].addr > (max_pfn << PAGE_SHIFT))
-                return -1;
-        *addr = e820.map[i].addr;
-        *size = min_t(u64, e820.map[i].size + e820.map[i].addr,
-                max_pfn << PAGE_SHIFT) - *addr;
-        return i + 1;
-}
-#endif
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index a0e11c0cc872..4353cf5e6fac 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -16,10 +16,7 @@
 #include <asm/dma.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
-
-#ifdef CONFIG_GART_IOMMU
-#include <asm/gart.h>
-#endif
+#include <asm/iommu.h>
 
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 6bc07f0f1202..109792bc7cfa 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -54,6 +54,16 @@
 #include <asm/ftrace.h>
 #include <asm/irq_vectors.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386         (EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE    0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysenter_audit  syscall_trace_entry
+#define sysexit_audit   syscall_exit_work
+#endif
+
 /*
  * We use macros for low-level operations which need to be overridden
  * for paravirtualization.  The following will never clobber any registers:
@@ -332,8 +342,9 @@ sysenter_past_esp:
         GET_THREAD_INFO(%ebp)
 
         /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-        testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
-        jnz syscall_trace_entry
+        testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
+        jnz sysenter_audit
+sysenter_do_call:
         cmpl $(nr_syscalls), %eax
         jae syscall_badsys
         call *sys_call_table(,%eax,4)
@@ -343,7 +354,8 @@ sysenter_past_esp:
         TRACE_IRQS_OFF
         movl TI_flags(%ebp), %ecx
         testw $_TIF_ALLWORK_MASK, %cx
-        jne syscall_exit_work
+        jne sysexit_audit
+sysenter_exit:
 /* if something modifies registers it must also disable sysexit */
         movl PT_EIP(%esp), %edx
         movl PT_OLDESP(%esp), %ecx
@@ -351,6 +363,45 @@ sysenter_past_esp:
         TRACE_IRQS_ON
 1:      mov  PT_FS(%esp), %fs
         ENABLE_INTERRUPTS_SYSEXIT
+
+#ifdef CONFIG_AUDITSYSCALL
+sysenter_audit:
+        testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+        jnz syscall_trace_entry
+        addl $4,%esp
+        CFI_ADJUST_CFA_OFFSET -4
+        /* %esi already in 8(%esp)         6th arg: 4th syscall arg */
+        /* %edx already in 4(%esp)         5th arg: 3rd syscall arg */
+        /* %ecx already in 0(%esp)         4th arg: 2nd syscall arg */
+        movl %ebx,%ecx                  /* 3rd arg: 1st syscall arg */
+        movl %eax,%edx                  /* 2nd arg: syscall number */
+        movl $AUDIT_ARCH_I386,%eax      /* 1st arg: audit arch */
+        call audit_syscall_entry
+        pushl %ebx
+        CFI_ADJUST_CFA_OFFSET 4
+        movl PT_EAX(%esp),%eax          /* reload syscall number */
+        jmp sysenter_do_call
+
+sysexit_audit:
+        testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+        jne syscall_exit_work
+        TRACE_IRQS_ON
+        ENABLE_INTERRUPTS(CLBR_ANY)
+        movl %eax,%edx          /* second arg, syscall return value */
+        cmpl $0,%eax            /* is it < 0? */
+        setl %al                /* 1 if so, 0 if not */
+        movzbl %al,%eax         /* zero-extend that */
+        inc %eax /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+        call audit_syscall_exit
+        DISABLE_INTERRUPTS(CLBR_ANY)
+        TRACE_IRQS_OFF
+        movl TI_flags(%ebp), %ecx
+        testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+        jne syscall_exit_work
+        movl PT_EAX(%esp),%eax  /* reload syscall return value */
+        jmp sysenter_exit
+#endif
+
         CFI_ENDPROC
 .pushsection .fixup,"ax"
 2:      movl $0,PT_FS(%esp)
@@ -370,7 +421,7 @@ ENTRY(system_call)
         GET_THREAD_INFO(%ebp)
                                         # system call tracing in operation / emulation
         /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-        testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+        testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
         jnz syscall_trace_entry
         cmpl $(nr_syscalls), %eax
         jae syscall_badsys
@@ -383,10 +434,6 @@ syscall_exit:
                                         # setting need_resched or sigpending
                                         # between sampling and the iret
         TRACE_IRQS_OFF
-        testl $X86_EFLAGS_TF,PT_EFLAGS(%esp)    # If tracing set singlestep flag on exit
-        jz no_singlestep
-        orl $_TIF_SINGLESTEP,TI_flags(%ebp)
-no_singlestep:
         movl TI_flags(%ebp), %ecx
         testw $_TIF_ALLWORK_MASK, %cx   # current->work
         jne syscall_exit_work
@@ -514,12 +561,8 @@ END(work_pending)
 syscall_trace_entry:
         movl $-ENOSYS,PT_EAX(%esp)
         movl %esp, %eax
-        xorl %edx,%edx
-        call do_syscall_trace
-        cmpl $0, %eax
-        jne resume_userspace            # ret != 0 -> running under PTRACE_SYSEMU,
-                                        # so must skip actual syscall
-        movl PT_ORIG_EAX(%esp), %eax
+        call syscall_trace_enter
+        /* What it returned is what we'll actually use.  */
         cmpl $(nr_syscalls), %eax
         jnae syscall_call
         jmp syscall_exit
@@ -528,14 +571,13 @@ END(syscall_trace_entry)
         # perform syscall exit tracing
         ALIGN
 syscall_exit_work:
-        testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
+        testb $_TIF_WORK_SYSCALL_EXIT, %cl
         jz work_pending
         TRACE_IRQS_ON
-        ENABLE_INTERRUPTS(CLBR_ANY)     # could let do_syscall_trace() call
+        ENABLE_INTERRUPTS(CLBR_ANY)     # could let syscall_trace_leave() call
                                         # schedule() instead
         movl %esp, %eax
-        movl $1, %edx
-        call do_syscall_trace
+        call syscall_trace_leave
         jmp resume_userspace
 END(syscall_exit_work)
         CFI_ENDPROC
@@ -1024,6 +1066,7 @@ ENDPROC(kernel_thread_helper)
 ENTRY(xen_sysenter_target)
         RING0_INT_FRAME
         addl $5*4, %esp         /* remove xen-provided frame */
+        CFI_ADJUST_CFA_OFFSET -5*4
         jmp sysenter_past_esp
         CFI_ENDPROC
 
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index ae63e584c340..89434d439605 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -53,6 +53,12 @@
 #include <asm/paravirt.h>
 #include <asm/ftrace.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_X86_64       (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE    0x40000000
+
         .code64
 
 #ifdef CONFIG_FTRACE
@@ -349,9 +355,9 @@ ENTRY(system_call_after_swapgs)
         movq  %rcx,RIP-ARGOFFSET(%rsp)
         CFI_REL_OFFSET rip,RIP-ARGOFFSET
         GET_THREAD_INFO(%rcx)
-        testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-                TI_flags(%rcx)
+        testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
         jnz tracesys
+system_call_fastpath:
         cmpq $__NR_syscall_max,%rax
         ja badsys
         movq %r10,%rcx
@@ -403,16 +409,16 @@ sysret_careful:
 sysret_signal:
         TRACE_IRQS_ON
         ENABLE_INTERRUPTS(CLBR_NONE)
-        testl $_TIF_DO_NOTIFY_MASK,%edx
-        jz    1f
-
-        /* Really a signal */
+#ifdef CONFIG_AUDITSYSCALL
+        bt $TIF_SYSCALL_AUDIT,%edx
+        jc sysret_audit
+#endif
         /* edx: work flags (arg3) */
         leaq do_notify_resume(%rip),%rax
         leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
         xorl %esi,%esi # oldset -> arg2
         call ptregscall_common
-1:      movl $_TIF_WORK_MASK,%edi
+        movl $_TIF_WORK_MASK,%edi
         /* Use IRET because user could have changed frame. This
            works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
         DISABLE_INTERRUPTS(CLBR_NONE)
@@ -423,14 +429,56 @@ badsys:
         movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
         jmp ret_from_sys_call
 
+#ifdef CONFIG_AUDITSYSCALL
+        /*
+         * Fast path for syscall audit without full syscall trace.
+         * We just call audit_syscall_entry() directly, and then
+         * jump back to the normal fast path.
+         */
+auditsys:
+        movq %r10,%r9                   /* 6th arg: 4th syscall arg */
+        movq %rdx,%r8                   /* 5th arg: 3rd syscall arg */
+        movq %rsi,%rcx                  /* 4th arg: 2nd syscall arg */
+        movq %rdi,%rdx                  /* 3rd arg: 1st syscall arg */
+        movq %rax,%rsi                  /* 2nd arg: syscall number */
+        movl $AUDIT_ARCH_X86_64,%edi    /* 1st arg: audit arch */
+        call audit_syscall_entry
+        LOAD_ARGS 0             /* reload call-clobbered registers */
+        jmp system_call_fastpath
+
+        /*
+         * Return fast path for syscall audit.  Call audit_syscall_exit()
+         * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
+         * masked off.
+         */
+sysret_audit:
+        movq %rax,%rsi          /* second arg, syscall return value */
+        cmpq $0,%rax            /* is it < 0? */
+        setl %al                /* 1 if so, 0 if not */
+        movzbl %al,%edi         /* zero-extend that into %edi */
+        inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+        call audit_syscall_exit
+        movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+        jmp sysret_check
+#endif  /* CONFIG_AUDITSYSCALL */
+
         /* Do syscall tracing */
 tracesys:                        
+#ifdef CONFIG_AUDITSYSCALL
+        testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
+        jz auditsys
+#endif
         SAVE_REST
         movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
         FIXUP_TOP_OF_STACK %rdi
         movq %rsp,%rdi
         call syscall_trace_enter
-        LOAD_ARGS ARGOFFSET  /* reload args from stack in case ptrace changed it */
+        /*
+         * Reload arg registers from stack in case ptrace changed them.
+         * We don't reload %rax because syscall_trace_enter() returned
+         * the value it wants us to use in the table lookup.
+         */
+        LOAD_ARGS ARGOFFSET, 1
         RESTORE_REST
         cmpq $__NR_syscall_max,%rax
         ja   int_ret_from_sys_call      /* RAX(%rsp) set to -ENOSYS above */
@@ -444,6 +492,7 @@ tracesys:
  * Has correct top of stack, but partial stack frame.
  */
         .globl int_ret_from_sys_call
+        .globl int_with_check
 int_ret_from_sys_call:
         DISABLE_INTERRUPTS(CLBR_NONE)
         TRACE_IRQS_OFF
@@ -483,7 +532,7 @@ int_very_careful:
         ENABLE_INTERRUPTS(CLBR_NONE)
         SAVE_REST
         /* Check for syscall exit trace */      
-        testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
+        testl $_TIF_WORK_SYSCALL_EXIT,%edx
         jz int_signal
         pushq %rdi
         CFI_ADJUST_CFA_OFFSET 8
@@ -491,7 +540,7 @@ int_very_careful:
         call syscall_trace_leave
         popq %rdi
         CFI_ADJUST_CFA_OFFSET -8
-        andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi
+        andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
         jmp int_restore_rest
         
 int_signal:
@@ -1189,6 +1238,7 @@ END(device_not_available)
         /* runs on exception stack */
 KPROBE_ENTRY(debug)
         INTR_FRAME
+        PARAVIRT_ADJUST_EXCEPTION_FRAME
         pushq $0
         CFI_ADJUST_CFA_OFFSET 8         
         paranoidentry do_debug, DEBUG_STACK
@@ -1198,6 +1248,7 @@ KPROBE_END(debug)
         /* runs on exception stack */   
 KPROBE_ENTRY(nmi)
         INTR_FRAME
+        PARAVIRT_ADJUST_EXCEPTION_FRAME
         pushq $-1
         CFI_ADJUST_CFA_OFFSET 8
         paranoidentry do_nmi, 0, 0
@@ -1211,6 +1262,7 @@ KPROBE_END(nmi)
 
 KPROBE_ENTRY(int3)
         INTR_FRAME
+        PARAVIRT_ADJUST_EXCEPTION_FRAME
         pushq $0
         CFI_ADJUST_CFA_OFFSET 8
         paranoidentry do_int3, DEBUG_STACK
@@ -1237,6 +1289,7 @@ END(coprocessor_segment_overrun)
         /* runs on exception stack */
 ENTRY(double_fault)
         XCPT_FRAME
+        PARAVIRT_ADJUST_EXCEPTION_FRAME
         paranoidentry do_double_fault
         jmp paranoid_exit1
         CFI_ENDPROC
@@ -1253,6 +1306,7 @@ END(segment_not_present)
         /* runs on exception stack */
 ENTRY(stack_segment)
         XCPT_FRAME
+        PARAVIRT_ADJUST_EXCEPTION_FRAME
         paranoidentry do_stack_segment
         jmp paranoid_exit1
         CFI_ENDPROC
@@ -1278,6 +1332,7 @@ END(spurious_interrupt_bug)
         /* runs on exception stack */
 ENTRY(machine_check)
         INTR_FRAME
+        PARAVIRT_ADJUST_EXCEPTION_FRAME
         pushq $0
         CFI_ADJUST_CFA_OFFSET 8 
         paranoidentry do_machine_check
@@ -1312,3 +1367,103 @@ KPROBE_ENTRY(ignore_sysret)
         sysret
         CFI_ENDPROC
 ENDPROC(ignore_sysret)
+
+#ifdef CONFIG_XEN
+ENTRY(xen_hypervisor_callback)
+        zeroentry xen_do_hypervisor_callback
+END(xen_hypervisor_callback)
+
+/*
+# A note on the "critical region" in our callback handler.
+# We want to avoid stacking callback handlers due to events occurring
+# during handling of the last event. To do this, we keep events disabled
+# until we've done all processing. HOWEVER, we must enable events before
+# popping the stack frame (can't be done atomically) and so it would still
+# be possible to get enough handler activations to overflow the stack.
+# Although unlikely, bugs of that kind are hard to track down, so we'd
+# like to avoid the possibility.
+# So, on entry to the handler we detect whether we interrupted an
+# existing activation in its critical region -- if so, we pop the current
+# activation and restart the handler using the previous one.
+*/
+ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
+        CFI_STARTPROC
+/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
+   see the correct pointer to the pt_regs */
+        movq %rdi, %rsp            # we don't return, adjust the stack frame
+        CFI_ENDPROC
+        CFI_DEFAULT_STACK
+11:     incl %gs:pda_irqcount
+        movq %rsp,%rbp
+        CFI_DEF_CFA_REGISTER rbp
+        cmovzq %gs:pda_irqstackptr,%rsp
+        pushq %rbp                      # backlink for old unwinder
+        call xen_evtchn_do_upcall
+        popq %rsp
+        CFI_DEF_CFA_REGISTER rsp
+        decl %gs:pda_irqcount
+        jmp  error_exit
+        CFI_ENDPROC
+END(do_hypervisor_callback)
+
+/*
+# Hypervisor uses this for application faults while it executes.
+# We get here for two reasons:
+#  1. Fault while reloading DS, ES, FS or GS
+#  2. Fault while executing IRET
+# Category 1 we do not need to fix up as Xen has already reloaded all segment
+# registers that could be reloaded and zeroed the others.
+# Category 2 we fix up by killing the current process. We cannot use the
+# normal Linux return path in this case because if we use the IRET hypercall
+# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+# We distinguish between categories by comparing each saved segment register
+# with its current contents: any discrepancy means we in category 1.
+*/
+ENTRY(xen_failsafe_callback)
+        framesz = (RIP-0x30)    /* workaround buggy gas */
+        _frame framesz
+        CFI_REL_OFFSET rcx, 0
+        CFI_REL_OFFSET r11, 8
+        movw %ds,%cx
+        cmpw %cx,0x10(%rsp)
+        CFI_REMEMBER_STATE
+        jne 1f
+        movw %es,%cx
+        cmpw %cx,0x18(%rsp)
+        jne 1f
+        movw %fs,%cx
+        cmpw %cx,0x20(%rsp)
+        jne 1f
+        movw %gs,%cx
+        cmpw %cx,0x28(%rsp)
+        jne 1f
+        /* All segments match their saved values => Category 2 (Bad IRET). */
+        movq (%rsp),%rcx
+        CFI_RESTORE rcx
+        movq 8(%rsp),%r11
+        CFI_RESTORE r11
+        addq $0x30,%rsp
+        CFI_ADJUST_CFA_OFFSET -0x30
+        pushq $0
+        CFI_ADJUST_CFA_OFFSET 8
+        pushq %r11
+        CFI_ADJUST_CFA_OFFSET 8
+        pushq %rcx
+        CFI_ADJUST_CFA_OFFSET 8
+        jmp general_protection
+        CFI_RESTORE_STATE
+1:      /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
+        movq (%rsp),%rcx
+        CFI_RESTORE rcx
+        movq 8(%rsp),%r11
+        CFI_RESTORE r11
+        addq $0x30,%rsp
+        CFI_ADJUST_CFA_OFFSET -0x30
+        pushq $0
+        CFI_ADJUST_CFA_OFFSET 8
+        SAVE_ALL
+        jmp error_exit
+        CFI_ENDPROC
+END(xen_failsafe_callback)
+
+#endif /* CONFIG_XEN */
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 1a9c68845ee8..786548a62d38 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -168,7 +168,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
          * May as well be the first.
          */
         cpu = first_cpu(cpumask);
-        if ((unsigned)cpu < NR_CPUS)
+        if ((unsigned)cpu < nr_cpu_ids)
                 return per_cpu(x86_cpu_to_apicid, cpu);
         else
                 return BAD_APICID;
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 711f11c30b06..2cfcbded888a 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -24,6 +24,7 @@
 #include <asm/pgtable.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
 
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
@@ -40,6 +41,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
 short uv_possible_blades;
 EXPORT_SYMBOL_GPL(uv_possible_blades);
 
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
 /* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
 
 static cpumask_t uv_target_cpus(void)
@@ -94,7 +98,7 @@ static void uv_send_IPI_mask(cpumask_t mask, int vector)
 {
         unsigned int cpu;
 
-        for (cpu = 0; cpu < NR_CPUS; ++cpu)
+        for_each_possible_cpu(cpu)
                 if (cpu_isset(cpu, mask))
                         uv_send_IPI_one(cpu, vector);
 }
@@ -128,7 +132,7 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
          * May as well be the first.
          */
         cpu = first_cpu(cpumask);
-        if ((unsigned)cpu < NR_CPUS)
+        if ((unsigned)cpu < nr_cpu_ids)
                 return per_cpu(x86_cpu_to_apicid, cpu);
         else
                 return BAD_APICID;
@@ -272,6 +276,23 @@ static __init void map_mmioh_high(int max_pnode)
                 map_high("MMIOH", mmioh.s.base, shift, map_uc);
 }
 
+static __init void uv_rtc_init(void)
+{
+        long status, ticks_per_sec, drift;
+
+        status =
+            x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
+                                        &drift);
+        if (status != 0 || ticks_per_sec < 100000) {
+                printk(KERN_WARNING
+                        "unable to determine platform RTC clock frequency, "
+                        "guessing.\n");
+                /* BIOS gives wrong value for clock freq. so guess */
+                sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+        } else
+                sn_rtc_cycles_per_second = ticks_per_sec;
+}
+
 static __init void uv_system_init(void)
 {
         union uvh_si_addr_map_config_u m_n_config;
@@ -326,6 +347,8 @@ static __init void uv_system_init(void)
         gnode_upper = (((unsigned long)node_id.s.node_id) &
                        ~((1 << n_val) - 1)) << m_val;
 
+        uv_rtc_init();
+
         for_each_present_cpu(cpu) {
                 nid = cpu_to_node(cpu);
                 pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu));
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index c97819829146..1b318e903bf6 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -39,6 +39,13 @@ static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata;
 static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly;
 #endif
 
+void __init x86_64_init_pda(void)
+{
+        _cpu_pda = __cpu_pda;
+        cpu_pda(0) = &_boot_cpu_pda;
+        pda_init(0);
+}
+
 static void __init zap_identity_mappings(void)
 {
         pgd_t *pgd = pgd_offset_k(0UL);
@@ -102,9 +109,7 @@ void __init x86_64_start_kernel(char * real_mode_data)
 
         early_printk("Kernel alive\n");
 
-        _cpu_pda = __cpu_pda;
-        cpu_pda(0) = &_boot_cpu_pda;
-        pda_init(0);
+        x86_64_init_pda();
 
         early_printk("Kernel really alive\n");
 
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index f67e93441caf..a7010c3a377a 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -456,9 +456,6 @@ is386:	movl $2,%ecx		# set MP
 1:
 #endif /* CONFIG_SMP */
         jmp *(initial_code)
-.align 4
-ENTRY(initial_code)
-        .long i386_start_kernel
 
 /*
  * We depend on ET to be correct. This checks for 287/387.
@@ -601,6 +598,11 @@ ignore_int:
 #endif
         iret
 
+.section .cpuinit.data,"wa"
+.align 4
+ENTRY(initial_code)
+        .long i386_start_kernel
+
 .section .text
 /*
  * Real beginning of normal "text" segment
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index b07ac7b217cb..db3280afe886 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -407,6 +407,7 @@ ENTRY(phys_base)
         /* This must match the first entry in level2_kernel_pgt */
         .quad   0x0000000000000000
 
+#include "../../x86/xen/xen-head.S"
         
         .section .bss, "aw", @nobits
         .align L1_CACHE_BYTES
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 0ea6a19bfdfe..ad2b15a1334d 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -468,7 +468,7 @@ void hpet_disable(void)
 #define RTC_NUM_INTS            1
 
 static unsigned long hpet_rtc_flags;
-static unsigned long hpet_prev_update_sec;
+static int hpet_prev_update_sec;
 static struct rtc_time hpet_alarm_time;
 static unsigned long hpet_pie_count;
 static unsigned long hpet_t1_cmp;
@@ -575,6 +575,9 @@ int hpet_set_rtc_irq_bit(unsigned long bit_mask)
 
         hpet_rtc_flags |= bit_mask;
 
+        if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE))
+                hpet_prev_update_sec = -1;
+
         if (!oldbits)
                 hpet_rtc_timer_init();
 
@@ -652,7 +655,7 @@ static void hpet_rtc_timer_reinit(void)
                 if (hpet_rtc_flags & RTC_PIE)
                         hpet_pie_count += lost_ints;
                 if (printk_ratelimit())
-                        printk(KERN_WARNING "rtc: lost %d interrupts\n",
+                        printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n",
                                 lost_ints);
         }
 }
@@ -670,7 +673,8 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 
         if (hpet_rtc_flags & RTC_UIE &&
             curr_time.tm_sec != hpet_prev_update_sec) {
-                rtc_int_flag = RTC_UF;
+                if (hpet_prev_update_sec >= 0)
+                        rtc_int_flag = RTC_UF;
                 hpet_prev_update_sec = curr_time.tm_sec;
         }
 
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 558abf4c796a..de9aa0e3a9c5 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -756,7 +756,7 @@ void send_IPI_self(int vector)
         /*
          * Send the IPI. The write to APIC_ICR fires this off.
          */
-        apic_write_around(APIC_ICR, cfg);
+        apic_write(APIC_ICR, cfg);
 }
 #endif /* !CONFIG_SMP */
 
@@ -2030,7 +2030,7 @@ static void mask_lapic_irq(unsigned int irq)
         unsigned long v;
 
         v = apic_read(APIC_LVT0);
-        apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+        apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
 }
 
 static void unmask_lapic_irq(unsigned int irq)
@@ -2038,7 +2038,7 @@ static void unmask_lapic_irq(unsigned int irq)
         unsigned long v;
 
         v = apic_read(APIC_LVT0);
-        apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+        apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
 }
 
 static struct irq_chip lapic_chip __read_mostly = {
@@ -2168,7 +2168,7 @@ static inline void __init check_timer(void)
          * The AEOI mode will finish them in the 8259A
          * automatically.
          */
-        apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+        apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
         init_8259A(1);
         timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
 
@@ -2177,8 +2177,9 @@ static inline void __init check_timer(void)
         pin2  = ioapic_i8259.pin;
         apic2 = ioapic_i8259.apic;
 
-        printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-                vector, apic1, pin1, apic2, pin2);
+        apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+                    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+                    vector, apic1, pin1, apic2, pin2);
 
         /*
          * Some BIOS writers are clueless and report the ExtINTA
@@ -2216,12 +2217,13 @@ static inline void __init check_timer(void)
                 }
                 clear_IO_APIC_pin(apic1, pin1);
                 if (!no_pin1)
-                        printk(KERN_ERR "..MP-BIOS bug: "
-                               "8254 timer not connected to IO-APIC\n");
+                        apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
+                                    "8254 timer not connected to IO-APIC\n");
 
-                printk(KERN_INFO "...trying to set up timer (IRQ0) "
-                       "through the 8259A ... ");
-                printk("\n..... (found pin %d) ...", pin2);
+                apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+                            "(IRQ0) through the 8259A ...\n");
+                apic_printk(APIC_QUIET, KERN_INFO
+                            "..... (found apic %d pin %d) ...\n", apic2, pin2);
                 /*
                  * legacy devices should be connected to IO APIC #0
                  */
@@ -2230,7 +2232,7 @@ static inline void __init check_timer(void)
                 unmask_IO_APIC_irq(0);
                 enable_8259A_irq(0);
                 if (timer_irq_works()) {
-                        printk("works.\n");
+                        apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
                         timer_through_8259 = 1;
                         if (nmi_watchdog == NMI_IO_APIC) {
                                 disable_8259A_irq(0);
@@ -2244,44 +2246,47 @@ static inline void __init check_timer(void)
                  */
                 disable_8259A_irq(0);
                 clear_IO_APIC_pin(apic2, pin2);
-                printk(" failed.\n");
+                apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
         }
 
         if (nmi_watchdog == NMI_IO_APIC) {
-                printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+                apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+                            "through the IO-APIC - disabling NMI Watchdog!\n");
                 nmi_watchdog = NMI_NONE;
         }
         timer_ack = 0;
 
-        printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+        apic_printk(APIC_QUIET, KERN_INFO
+                    "...trying to set up timer as Virtual Wire IRQ...\n");
 
         lapic_register_intr(0, vector);
-        apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector);   /* Fixed mode */
+        apic_write(APIC_LVT0, APIC_DM_FIXED | vector);  /* Fixed mode */
         enable_8259A_irq(0);
 
         if (timer_irq_works()) {
-                printk(" works.\n");
+                apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
                 goto out;
         }
         disable_8259A_irq(0);
-        apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
-        printk(" failed.\n");
+        apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+        apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
 
-        printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+        apic_printk(APIC_QUIET, KERN_INFO
+                    "...trying to set up timer as ExtINT IRQ...\n");
 
         init_8259A(0);
         make_8259A_irq(0);
-        apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+        apic_write(APIC_LVT0, APIC_DM_EXTINT);
 
         unlock_ExtINT_logic();
 
         if (timer_irq_works()) {
-                printk(" works.\n");
+                apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
                 goto out;
         }
-        printk(" failed :(.\n");
+        apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
         panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
-                "report.  Then try booting with the 'noapic' option");
+                "report.  Then try booting with the 'noapic' option.\n");
 out:
         local_irq_restore(flags);
 }
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index 6510cde36b35..8269434d1707 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -45,6 +45,7 @@
 #include <asm/proto.h>
 #include <asm/acpi.h>
 #include <asm/dma.h>
+#include <asm/i8259.h>
 #include <asm/nmi.h>
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
@@ -731,7 +732,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask)
                         return 0;
         }
 
-        for_each_cpu_mask(cpu, mask) {
+        for_each_cpu_mask_nr(cpu, mask) {
                 cpumask_t domain, new_mask;
                 int new_cpu;
                 int vector, offset;
@@ -752,7 +753,7 @@ next:
                         continue;
                 if (vector == IA32_SYSCALL_VECTOR)
                         goto next;
-                for_each_cpu_mask(new_cpu, new_mask)
+                for_each_cpu_mask_nr(new_cpu, new_mask)
                         if (per_cpu(vector_irq, new_cpu)[vector] != -1)
                                 goto next;
                 /* Found one! */
@@ -762,7 +763,7 @@ next:
                         cfg->move_in_progress = 1;
                         cfg->old_domain = cfg->domain;
                 }
-                for_each_cpu_mask(new_cpu, new_mask)
+                for_each_cpu_mask_nr(new_cpu, new_mask)
                         per_cpu(vector_irq, new_cpu)[vector] = irq;
                 cfg->vector = vector;
                 cfg->domain = domain;
@@ -794,7 +795,7 @@ static void __clear_irq_vector(int irq)
 
         vector = cfg->vector;
         cpus_and(mask, cfg->domain, cpu_online_map);
-        for_each_cpu_mask(cpu, mask)
+        for_each_cpu_mask_nr(cpu, mask)
                 per_cpu(vector_irq, cpu)[vector] = -1;
 
         cfg->vector = 0;
@@ -1372,12 +1373,10 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
 static int ioapic_retrigger_irq(unsigned int irq)
 {
         struct irq_cfg *cfg = &irq_cfg[irq];
-        cpumask_t mask;
         unsigned long flags;
 
         spin_lock_irqsave(&vector_lock, flags);
-        mask = cpumask_of_cpu(first_cpu(cfg->domain));
-        send_IPI_mask(mask, cfg->vector);
+        send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector);
         spin_unlock_irqrestore(&vector_lock, flags);
 
         return 1;
@@ -1696,8 +1695,9 @@ static inline void __init check_timer(void)
         pin2  = ioapic_i8259.pin;
         apic2 = ioapic_i8259.apic;
 
-        apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-                cfg->vector, apic1, pin1, apic2, pin2);
+        apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+                    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+                    cfg->vector, apic1, pin1, apic2, pin2);
 
         /*
          * Some BIOS writers are clueless and report the ExtINTA
@@ -1735,14 +1735,13 @@ static inline void __init check_timer(void)
                 }
                 clear_IO_APIC_pin(apic1, pin1);
                 if (!no_pin1)
-                        apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: "
+                        apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
                                     "8254 timer not connected to IO-APIC\n");
 
-                apic_printk(APIC_VERBOSE,KERN_INFO
-                        "...trying to set up timer (IRQ0) "
-                        "through the 8259A ... ");
-                apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
-                        apic2, pin2);
+                apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+                            "(IRQ0) through the 8259A ...\n");
+                apic_printk(APIC_QUIET, KERN_INFO
+                            "..... (found apic %d pin %d) ...\n", apic2, pin2);
                 /*
                  * legacy devices should be connected to IO APIC #0
                  */
@@ -1751,7 +1750,7 @@ static inline void __init check_timer(void)
                 unmask_IO_APIC_irq(0);
                 enable_8259A_irq(0);
                 if (timer_irq_works()) {
-                        apic_printk(APIC_VERBOSE," works.\n");
+                        apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
                         timer_through_8259 = 1;
                         if (nmi_watchdog == NMI_IO_APIC) {
                                 disable_8259A_irq(0);
@@ -1765,29 +1764,32 @@ static inline void __init check_timer(void)
                  */
                 disable_8259A_irq(0);
                 clear_IO_APIC_pin(apic2, pin2);
-                apic_printk(APIC_VERBOSE," failed.\n");
+                apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
         }
 
         if (nmi_watchdog == NMI_IO_APIC) {
-                printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+                apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+                            "through the IO-APIC - disabling NMI Watchdog!\n");
                 nmi_watchdog = NMI_NONE;
         }
 
-        apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+        apic_printk(APIC_QUIET, KERN_INFO
+                    "...trying to set up timer as Virtual Wire IRQ...\n");
 
         lapic_register_intr(0);
         apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);     /* Fixed mode */
         enable_8259A_irq(0);
 
         if (timer_irq_works()) {
-                apic_printk(APIC_VERBOSE," works.\n");
+                apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
                 goto out;
         }
         disable_8259A_irq(0);
         apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
-        apic_printk(APIC_VERBOSE," failed.\n");
+        apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
 
-        apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+        apic_printk(APIC_QUIET, KERN_INFO
+                    "...trying to set up timer as ExtINT IRQ...\n");
 
         init_8259A(0);
         make_8259A_irq(0);
@@ -1796,11 +1798,12 @@ static inline void __init check_timer(void)
         unlock_ExtINT_logic();
 
         if (timer_irq_works()) {
-                apic_printk(APIC_VERBOSE," works.\n");
+                apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
                 goto out;
         }
-        apic_printk(APIC_VERBOSE," failed :(.\n");
-        panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
+        apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
+        panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
+                "report.  Then try booting with the 'noapic' option.\n");
 out:
         local_irq_restore(flags);
 }
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index 5921e5f0a640..1c3a66a67f83 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -103,6 +103,9 @@ void __init io_delay_init(void)
 
 static int __init io_delay_param(char *s)
 {
+        if (!s)
+                return -EINVAL;
+
         if (!strcmp(s, "0x80"))
                 io_delay_type = CONFIG_IO_DELAY_TYPE_0X80;
         else if (!strcmp(s, "0xed"))
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 9d98cda39ad9..3f7537b669d3 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -70,7 +70,7 @@ void __send_IPI_shortcut(unsigned int shortcut, int vector)
         /*
          * Send the IPI. The write to APIC_ICR fires this off.
          */
-        apic_write_around(APIC_ICR, cfg);
+        apic_write(APIC_ICR, cfg);
 }
 
 void send_IPI_self(int vector)
@@ -98,7 +98,7 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector)
          * prepare target chip field
          */
         cfg = __prepare_ICR2(mask);
-        apic_write_around(APIC_ICR2, cfg);
+        apic_write(APIC_ICR2, cfg);
 
         /*
          * program the ICR
@@ -108,7 +108,7 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector)
         /*
          * Send the IPI. The write to APIC_ICR fires this off.
          */
-        apic_write_around(APIC_ICR, cfg);
+        apic_write(APIC_ICR, cfg);
 }
 
 /*
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 47a6f6f12478..1cf8c1fcc088 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -83,11 +83,8 @@ union irq_ctx {
 static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
 static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
 
-static char softirq_stack[NR_CPUS * THREAD_SIZE]
-                __attribute__((__section__(".bss.page_aligned")));
-
-static char hardirq_stack[NR_CPUS * THREAD_SIZE]
-                __attribute__((__section__(".bss.page_aligned")));
+static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
+static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
 
 static void call_on_stack(void *func, void *stack)
 {
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index 0373e88de95a..1f26fd9ec4f4 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -43,10 +43,11 @@
 
 #define BUILD_IRQ(nr)                           \
         asmlinkage void IRQ_NAME(nr);           \
-        asm("\n.p2align\n"                      \
+        asm("\n.text\n.p2align\n"               \
             "IRQ" #nr "_interrupt:\n\t"         \
             "push $~(" #nr ") ; "               \
-            "jmp common_interrupt");
+            "jmp common_interrupt\n"            \
+            ".previous");
 
 #define BI(x,y) \
         BUILD_IRQ(x##y)
diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c
index c03205991718..f2d43bc75514 100644
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -12,9 +12,13 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 
+struct dentry *arch_debugfs_dir;
+EXPORT_SYMBOL(arch_debugfs_dir);
+
 #ifdef CONFIG_DEBUG_BOOT_PARAMS
 struct setup_data_node {
         u64 paddr;
@@ -209,6 +213,10 @@ static int __init arch_kdebugfs_init(void)
 {
         int error = 0;
 
+        arch_debugfs_dir = debugfs_create_dir("x86", NULL);
+        if (!arch_debugfs_dir)
+                return -ENOMEM;
+
 #ifdef CONFIG_DEBUG_BOOT_PARAMS
         error = boot_params_kdebugfs_init();
 #endif
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index b8c6743a13da..6c27679ec6aa 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -431,7 +431,6 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
                 regs->ip = (unsigned long)p->ainsn.insn;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
                                       struct pt_regs *regs)
 {
@@ -682,8 +681,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
         unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
         INIT_HLIST_HEAD(&empty_rp);
-        spin_lock_irqsave(&kretprobe_lock, flags);
-        head = kretprobe_inst_table_head(current);
+        kretprobe_hash_lock(current, &head, &flags);
         /* fixup registers */
 #ifdef CONFIG_X86_64
         regs->cs = __KERNEL_CS;
@@ -732,7 +730,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 
         kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
-        spin_unlock_irqrestore(&kretprobe_lock, flags);
+        kretprobe_hash_unlock(current, &flags);
 
         hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
                 hlist_del(&ri->hlist);
@@ -860,7 +858,6 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 
         resume_execution(cur, regs, kcb);
         regs->flags |= kcb->kprobe_saved_flags;
-        trace_hardirqs_fixup_flags(regs->flags);
 
         if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
                 kcb->kprobe_status = KPROBE_HIT_SSDONE;
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 87edf1ceb1df..d02def06ca91 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -113,7 +113,7 @@ static void kvm_setup_secondary_clock(void)
 #endif
 
 #ifdef CONFIG_SMP
-void __init kvm_smp_prepare_boot_cpu(void)
+static void __init kvm_smp_prepare_boot_cpu(void)
 {
         WARN_ON(kvm_register_clock("primary cpu clock"));
         native_smp_prepare_boot_cpu();
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index a8449571858a..3fee2aa50f3f 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -62,12 +62,12 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 
         if (reload) {
 #ifdef CONFIG_SMP
-                cpumask_t mask;
+                cpumask_of_cpu_ptr_declare(mask);
 
                 preempt_disable();
                 load_LDT(pc);
-                mask = cpumask_of_cpu(smp_processor_id());
-                if (!cpus_equal(current->mm->cpu_vm_mask, mask))
+                cpumask_of_cpu_ptr_next(mask, smp_processor_id());
+                if (!cpus_equal(current->mm->cpu_vm_mask, *mask))
                         smp_call_function(flush_ldt, current->mm, 1);
                 preempt_enable();
 #else
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 8864230d55af..9fe478d98406 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -22,6 +22,7 @@
 #include <asm/cpufeature.h>
 #include <asm/desc.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 
 #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
 static u32 kexec_pgd[1024] PAGE_ALIGNED;
@@ -85,10 +86,12 @@ static void load_segments(void)
  * reboot code buffer to allow us to avoid allocations
  * later.
  *
- * Currently nothing.
+ * Make control page executable.
  */
 int machine_kexec_prepare(struct kimage *image)
 {
+        if (nx_enabled)
+                set_pages_x(image->control_code_page, 1);
         return 0;
 }
 
@@ -98,27 +101,48 @@ int machine_kexec_prepare(struct kimage *image)
  */
 void machine_kexec_cleanup(struct kimage *image)
 {
+        if (nx_enabled)
+                set_pages_nx(image->control_code_page, 1);
 }
 
 /*
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
         unsigned long page_list[PAGES_NR];
         void *control_page;
+        asmlinkage unsigned long
+                (*relocate_kernel_ptr)(unsigned long indirection_page,
+                                       unsigned long control_page,
+                                       unsigned long start_address,
+                                       unsigned int has_pae,
+                                       unsigned int preserve_context);
 
         tracer_disable();
 
         /* Interrupts aren't acceptable while we reboot */
         local_irq_disable();
 
+        if (image->preserve_context) {
+#ifdef CONFIG_X86_IO_APIC
+                /* We need to put APICs in legacy mode so that we can
+                 * get timer interrupts in second kernel. kexec/kdump
+                 * paths already have calls to disable_IO_APIC() in
+                 * one form or other. kexec jump path also need
+                 * one.
+                 */
+                disable_IO_APIC();
+#endif
+        }
+
         control_page = page_address(image->control_code_page);
-        memcpy(control_page, relocate_kernel, PAGE_SIZE);
+        memcpy(control_page, relocate_kernel, PAGE_SIZE/2);
 
+        relocate_kernel_ptr = control_page;
         page_list[PA_CONTROL_PAGE] = __pa(control_page);
-        page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
+        page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
         page_list[PA_PGD] = __pa(kexec_pgd);
         page_list[VA_PGD] = (unsigned long)kexec_pgd;
 #ifdef CONFIG_X86_PAE
@@ -131,6 +155,7 @@ NORET_TYPE void machine_kexec(struct kimage *image)
         page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
         page_list[PA_PTE_1] = __pa(kexec_pte1);
         page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
+        page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT);
 
         /* The segment registers are funny things, they have both a
          * visible and an invisible part.  Whenever the visible part is
@@ -149,8 +174,10 @@ NORET_TYPE void machine_kexec(struct kimage *image)
         set_idt(phys_to_virt(0),0);
 
         /* now call it */
-        relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
-                        image->start, cpu_has_pae);
+        image->start = relocate_kernel_ptr((unsigned long)image->head,
+                                           (unsigned long)page_list,
+                                           image->start, cpu_has_pae,
+                                           image->preserve_context);
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 9dd9262693a3..c43caa3a91f3 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -181,7 +181,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
         unsigned long page_list[PAGES_NR];
         void *control_page;
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 56b933119a04..6994c751590e 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -388,6 +388,7 @@ static int do_microcode_update (void)
         void *new_mc = NULL;
         int cpu;
         cpumask_t old;
+        cpumask_of_cpu_ptr_declare(newmask);
 
         old = current->cpus_allowed;
 
@@ -404,7 +405,8 @@ static int do_microcode_update (void)
 
                         if (!uci->valid)
                                 continue;
-                        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+                        cpumask_of_cpu_ptr_next(newmask, cpu);
+                        set_cpus_allowed_ptr(current, newmask);
                         error = get_maching_microcode(new_mc, cpu);
                         if (error < 0)
                                 goto out;
@@ -574,6 +576,7 @@ static int apply_microcode_check_cpu(int cpu)
         struct cpuinfo_x86 *c = &cpu_data(cpu);
         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
         cpumask_t old;
+        cpumask_of_cpu_ptr(newmask, cpu);
         unsigned int val[2];
         int err = 0;
 
@@ -582,7 +585,7 @@ static int apply_microcode_check_cpu(int cpu)
                 return 0;
 
         old = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+        set_cpus_allowed_ptr(current, newmask);
 
         /* Check if the microcode we have in memory matches the CPU */
         if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
@@ -620,11 +623,12 @@ static int apply_microcode_check_cpu(int cpu)
 static void microcode_init_cpu(int cpu, int resume)
 {
         cpumask_t old;
+        cpumask_of_cpu_ptr(newmask, cpu);
         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
         old = current->cpus_allowed;
 
-        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+        set_cpus_allowed_ptr(current, newmask);
         mutex_lock(&microcode_mutex);
         collect_cpu_info(cpu);
         if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
@@ -644,7 +648,9 @@ static void microcode_fini_cpu(int cpu)
         mutex_unlock(&microcode_mutex);
 }
 
-static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
+static ssize_t reload_store(struct sys_device *dev,
+                            struct sysdev_attribute *attr,
+                            const char *buf, size_t sz)
 {
         struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
         char *end;
@@ -656,11 +662,12 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
                 return -EINVAL;
         if (val == 1) {
                 cpumask_t old;
+                cpumask_of_cpu_ptr(newmask, cpu);
 
                 old = current->cpus_allowed;
 
                 get_online_cpus();
-                set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+                set_cpus_allowed_ptr(current, newmask);
 
                 mutex_lock(&microcode_mutex);
                 if (uci->valid)
@@ -674,14 +681,16 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
         return sz;
 }
 
-static ssize_t version_show(struct sys_device *dev, char *buf)
+static ssize_t version_show(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
         return sprintf(buf, "0x%x\n", uci->rev);
 }
 
-static ssize_t pf_show(struct sys_device *dev, char *buf)
+static ssize_t pf_show(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module_64.c
index a888e67f5874..6ba87830d4b1 100644
--- a/arch/x86/kernel/module_64.c
+++ b/arch/x86/kernel/module_64.c
@@ -22,6 +22,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/bug.h>
 
@@ -150,7 +151,8 @@ int module_finalize(const Elf_Ehdr *hdr,
                     const Elf_Shdr *sechdrs,
                     struct module *me)
 {
-        const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL;
+        const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL,
+                *para = NULL;
         char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
 
         for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
@@ -160,6 +162,8 @@ int module_finalize(const Elf_Ehdr *hdr,
                         alt = s;
                 if (!strcmp(".smp_locks", secstrings + s->sh_name))
                         locks= s;
+                if (!strcmp(".parainstructions", secstrings + s->sh_name))
+                        para = s;
         }
 
         if (alt) {
@@ -175,6 +179,11 @@ int module_finalize(const Elf_Ehdr *hdr,
                                             tseg, tseg + text->sh_size);
         }
 
+        if (para) {
+                void *pseg = (void *)para->sh_addr;
+                apply_paravirt(pseg, pseg + para->sh_size);
+        }
+
         return module_bug_finalize(hdr, sechdrs, me);
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 3b25e49380c6..6ae005ccaed8 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -27,6 +27,7 @@
 #include <asm/bios_ebda.h>
 #include <asm/e820.h>
 #include <asm/trampoline.h>
+#include <asm/setup.h>
 
 #include <mach_apic.h>
 #ifdef CONFIG_X86_32
@@ -48,76 +49,6 @@ static int __init mpf_checksum(unsigned char *mp, int len)
         return sum & 0xFF;
 }
 
-#ifdef CONFIG_X86_NUMAQ
-int found_numaq;
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-struct mpc_config_translation {
-        unsigned char mpc_type;
-        unsigned char trans_len;
-        unsigned char trans_type;
-        unsigned char trans_quad;
-        unsigned char trans_global;
-        unsigned char trans_local;
-        unsigned short trans_reserved;
-};
-
-
-static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
-    __cpuinitdata;
-
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-        return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
-
-static inline int mpc_apic_id(struct mpc_config_processor *m,
-                        struct mpc_config_translation *translation_record)
-{
-        int quad = translation_record->trans_quad;
-        int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
-        printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-               m->mpc_apicid,
-               (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-               (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-               m->mpc_apicver, quad, logical_apicid);
-        return logical_apicid;
-}
-
-int mp_bus_id_to_node[MAX_MP_BUSSES];
-
-int mp_bus_id_to_local[MAX_MP_BUSSES];
-
-static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-        struct mpc_config_translation *translation)
-{
-        int quad = translation->trans_quad;
-        int local = translation->trans_local;
-
-        mp_bus_id_to_node[m->mpc_busid] = quad;
-        mp_bus_id_to_local[m->mpc_busid] = local;
-        printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-               m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-static void mpc_oem_pci_bus(struct mpc_config_bus *m,
-        struct mpc_config_translation *translation)
-{
-        int quad = translation->trans_quad;
-        int local = translation->trans_local;
-
-        quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
-
-#endif
-
 static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 {
         int apicid;
@@ -127,14 +58,12 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
                 disabled_cpus++;
                 return;
         }
-#ifdef CONFIG_X86_NUMAQ
-        if (found_numaq)
-                apicid = mpc_apic_id(m, translation_table[mpc_record]);
+
+        if (x86_quirks->mpc_apic_id)
+                apicid = x86_quirks->mpc_apic_id(m);
         else
                 apicid = m->mpc_apicid;
-#else
-        apicid = m->mpc_apicid;
-#endif
+
         if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
                 bootup_cpu = " (Bootup-CPU)";
                 boot_cpu_physical_apicid = m->mpc_apicid;
@@ -151,12 +80,10 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
         memcpy(str, m->mpc_bustype, 6);
         str[6] = 0;
 
-#ifdef CONFIG_X86_NUMAQ
-        if (found_numaq)
-                mpc_oem_bus_info(m, str, translation_table[mpc_record]);
-#else
-        printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
-#endif
+        if (x86_quirks->mpc_oem_bus_info)
+                x86_quirks->mpc_oem_bus_info(m, str);
+        else
+                printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
 
 #if MAX_MP_BUSSES < 256
         if (m->mpc_busid >= MAX_MP_BUSSES) {
@@ -173,10 +100,9 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
                 mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
 #endif
         } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
-#ifdef CONFIG_X86_NUMAQ
-                if (found_numaq)
-                        mpc_oem_pci_bus(m, translation_table[mpc_record]);
-#endif
+                if (x86_quirks->mpc_oem_pci_bus)
+                        x86_quirks->mpc_oem_pci_bus(m);
+
                 clear_bit(m->mpc_busid, mp_bus_not_pci);
 #if defined(CONFIG_EISA) || defined (CONFIG_MCA)
                 mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
@@ -316,83 +242,6 @@ static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
                 m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
 }
 
-#ifdef CONFIG_X86_NUMAQ
-static void __init MP_translation_info(struct mpc_config_translation *m)
-{
-        printk(KERN_INFO
-               "Translation: record %d, type %d, quad %d, global %d, local %d\n",
-               mpc_record, m->trans_type, m->trans_quad, m->trans_global,
-               m->trans_local);
-
-        if (mpc_record >= MAX_MPC_ENTRY)
-                printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
-        else
-                translation_table[mpc_record] = m;      /* stash this for later */
-        if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
-                node_set_online(m->trans_quad);
-}
-
-/*
- * Read/parse the MPC oem tables
- */
-
-static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
-                                    unsigned short oemsize)
-{
-        int count = sizeof(*oemtable);  /* the header size */
-        unsigned char *oemptr = ((unsigned char *)oemtable) + count;
-
-        mpc_record = 0;
-        printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
-               oemtable);
-        if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
-                printk(KERN_WARNING
-                       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
-                       oemtable->oem_signature[0], oemtable->oem_signature[1],
-                       oemtable->oem_signature[2], oemtable->oem_signature[3]);
-                return;
-        }
-        if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
-                printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
-                return;
-        }
-        while (count < oemtable->oem_length) {
-                switch (*oemptr) {
-                case MP_TRANSLATION:
-                        {
-                                struct mpc_config_translation *m =
-                                    (struct mpc_config_translation *)oemptr;
-                                MP_translation_info(m);
-                                oemptr += sizeof(*m);
-                                count += sizeof(*m);
-                                ++mpc_record;
-                                break;
-                        }
-                default:
-                        {
-                                printk(KERN_WARNING
-                                       "Unrecognised OEM table entry type! - %d\n",
-                                       (int)*oemptr);
-                                return;
-                        }
-                }
-        }
-}
-
-void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
-                                 char *productid)
-{
-        if (strncmp(oem, "IBM NUMA", 8))
-                printk("Warning!  Not a NUMA-Q system!\n");
-        else
-                found_numaq = 1;
-
-        if (mpc->mpc_oemptr)
-                smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
-                                 mpc->mpc_oemsize);
-}
-#endif /* CONFIG_X86_NUMAQ */
-
 /*
  * Read/parse the MPC
  */
@@ -457,7 +306,6 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
         } else
                 mps_oem_check(mpc, oem, str);
 #endif
-
         /* save the local APIC address, it might be non-default */
         if (!acpi_lapic)
                 mp_lapic_addr = mpc->mpc_lapic;
@@ -465,12 +313,17 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
         if (early)
                 return 1;
 
+        if (mpc->mpc_oemptr && x86_quirks->smp_read_mpc_oem) {
+                struct mp_config_oemtable *oem_table = (struct mp_config_oemtable *)(unsigned long)mpc->mpc_oemptr;
+                x86_quirks->smp_read_mpc_oem(oem_table, mpc->mpc_oemsize);
+        }
+
         /*
          *      Now process the configuration blocks.
          */
-#ifdef CONFIG_X86_NUMAQ
-        mpc_record = 0;
-#endif
+        if (x86_quirks->mpc_record)
+                *x86_quirks->mpc_record = 0;
+
         while (count < mpc->mpc_length) {
                 switch (*mpt) {
                 case MP_PROCESSOR:
@@ -536,9 +389,8 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
                         count = mpc->mpc_length;
                         break;
                 }
-#ifdef CONFIG_X86_NUMAQ
-                ++mpc_record;
-#endif
+                if (x86_quirks->mpc_record)
+                        (*x86_quirks->mpc_record)++;
         }
 
 #ifdef CONFIG_X86_GENERICARCH
@@ -726,20 +578,14 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 static struct intel_mp_floating *mpf_found;
 
 /*
- * Machine specific quirk for finding the SMP config before other setup
- * activities destroy the table:
- */
-int (*mach_get_smp_config_quirk)(unsigned int early);
-
-/*
  * Scan the memory blocks for an SMP configuration block.
  */
 static void __init __get_smp_config(unsigned int early)
 {
         struct intel_mp_floating *mpf = mpf_found;
 
-        if (mach_get_smp_config_quirk) {
-                if (mach_get_smp_config_quirk(early))
+        if (x86_quirks->mach_get_smp_config) {
+                if (x86_quirks->mach_get_smp_config(early))
                         return;
         }
         if (acpi_lapic && early)
@@ -899,14 +745,12 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
         return 0;
 }
 
-int (*mach_find_smp_config_quirk)(unsigned int reserve);
-
 static void __init __find_smp_config(unsigned int reserve)
 {
         unsigned int address;
 
-        if (mach_find_smp_config_quirk) {
-                if (mach_find_smp_config_quirk(reserve))
+        if (x86_quirks->mach_find_smp_config) {
+                if (x86_quirks->mach_find_smp_config(reserve))
                         return;
         }
         /*
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index a153b3905f60..9fd809552447 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -149,8 +149,8 @@ static int __cpuinit msr_device_create(int cpu)
 {
         struct device *dev;
 
-        dev = device_create(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
-                            "msr%d", cpu);
+        dev = device_create_drvdata(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
+                                    NULL, "msr%d", cpu);
         return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index ec024b3baad0..ac6d51222e7d 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -263,7 +263,7 @@ late_initcall(init_lapic_nmi_sysfs);
 
 static void __acpi_nmi_enable(void *__unused)
 {
-        apic_write_around(APIC_LVT0, APIC_DM_NMI);
+        apic_write(APIC_LVT0, APIC_DM_NMI);
 }
 
 /*
@@ -277,7 +277,7 @@ void acpi_nmi_enable(void)
 
 static void __acpi_nmi_disable(void *__unused)
 {
-        apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
+        apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
 }
 
 /*
@@ -448,6 +448,13 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 
 #ifdef CONFIG_SYSCTL
 
+static int __init setup_unknown_nmi_panic(char *str)
+{
+        unknown_nmi_panic = 1;
+        return 1;
+}
+__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
+
 static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
 {
         unsigned char reason = get_nmi_reason();
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index a23e8233b9ac..b8c45610b20a 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -33,6 +33,7 @@
 #include <asm/processor.h>
 #include <asm/mpspec.h>
 #include <asm/e820.h>
+#include <asm/setup.h>
 
 #define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
@@ -71,6 +72,188 @@ static void __init smp_dump_qct(void)
         }
 }
 
+
+void __init numaq_tsc_disable(void)
+{
+        if (!found_numaq)
+                return;
+
+        if (num_online_nodes() > 1) {
+                printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
+                setup_clear_cpu_cap(X86_FEATURE_TSC);
+        }
+}
+
+static int __init numaq_pre_time_init(void)
+{
+        numaq_tsc_disable();
+        return 0;
+}
+
+int found_numaq;
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+struct mpc_config_translation {
+        unsigned char mpc_type;
+        unsigned char trans_len;
+        unsigned char trans_type;
+        unsigned char trans_quad;
+        unsigned char trans_global;
+        unsigned char trans_local;
+        unsigned short trans_reserved;
+};
+
+/* x86_quirks member */
+static int mpc_record;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
+    __cpuinitdata;
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+        return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+/* x86_quirks member */
+static int mpc_apic_id(struct mpc_config_processor *m)
+{
+        int quad = translation_table[mpc_record]->trans_quad;
+        int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+        printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+               m->mpc_apicid,
+               (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+               (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+               m->mpc_apicver, quad, logical_apicid);
+        return logical_apicid;
+}
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+
+/* x86_quirks member */
+static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name)
+{
+        int quad = translation_table[mpc_record]->trans_quad;
+        int local = translation_table[mpc_record]->trans_local;
+
+        mp_bus_id_to_node[m->mpc_busid] = quad;
+        mp_bus_id_to_local[m->mpc_busid] = local;
+        printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+               m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+
+/* x86_quirks member */
+static void mpc_oem_pci_bus(struct mpc_config_bus *m)
+{
+        int quad = translation_table[mpc_record]->trans_quad;
+        int local = translation_table[mpc_record]->trans_local;
+
+        quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
+static void __init MP_translation_info(struct mpc_config_translation *m)
+{
+        printk(KERN_INFO
+               "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+               mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+               m->trans_local);
+
+        if (mpc_record >= MAX_MPC_ENTRY)
+                printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+        else
+                translation_table[mpc_record] = m;      /* stash this for later */
+        if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+                node_set_online(m->trans_quad);
+}
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+        int sum = 0;
+
+        while (len--)
+                sum += *mp++;
+
+        return sum & 0xFF;
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
+                                    unsigned short oemsize)
+{
+        int count = sizeof(*oemtable);  /* the header size */
+        unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
+        mpc_record = 0;
+        printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
+               oemtable);
+        if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
+                printk(KERN_WARNING
+                       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+                       oemtable->oem_signature[0], oemtable->oem_signature[1],
+                       oemtable->oem_signature[2], oemtable->oem_signature[3]);
+                return;
+        }
+        if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
+                printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+                return;
+        }
+        while (count < oemtable->oem_length) {
+                switch (*oemptr) {
+                case MP_TRANSLATION:
+                        {
+                                struct mpc_config_translation *m =
+                                    (struct mpc_config_translation *)oemptr;
+                                MP_translation_info(m);
+                                oemptr += sizeof(*m);
+                                count += sizeof(*m);
+                                ++mpc_record;
+                                break;
+                        }
+                default:
+                        {
+                                printk(KERN_WARNING
+                                       "Unrecognised OEM table entry type! - %d\n",
+                                       (int)*oemptr);
+                                return;
+                        }
+                }
+        }
+}
+
+static struct x86_quirks numaq_x86_quirks __initdata = {
+        .arch_pre_time_init     = numaq_pre_time_init,
+        .arch_time_init         = NULL,
+        .arch_pre_intr_init     = NULL,
+        .arch_memory_setup      = NULL,
+        .arch_intr_init         = NULL,
+        .arch_trap_init         = NULL,
+        .mach_get_smp_config    = NULL,
+        .mach_find_smp_config   = NULL,
+        .mpc_record             = &mpc_record,
+        .mpc_apic_id            = mpc_apic_id,
+        .mpc_oem_bus_info       = mpc_oem_bus_info,
+        .mpc_oem_pci_bus        = mpc_oem_pci_bus,
+        .smp_read_mpc_oem       = smp_read_mpc_oem,
+};
+
+void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+                                 char *productid)
+{
+        if (strncmp(oem, "IBM NUMA", 8))
+                printk("Warning!  Not a NUMA-Q system!\n");
+        else
+                found_numaq = 1;
+}
+
 static __init void early_check_numaq(void)
 {
         /*
@@ -82,6 +265,9 @@ static __init void early_check_numaq(void)
          */
         if (smp_found_config)
                 early_get_smp_config();
+
+        if (found_numaq)
+                x86_quirks = &numaq_x86_quirks;
 }
 
 int __init get_memcfg_numaq(void)
@@ -92,14 +278,3 @@ int __init get_memcfg_numaq(void)
         smp_dump_qct();
         return 1;
 }
-
-void __init numaq_tsc_disable(void)
-{
-        if (!found_numaq)
-                return;
-
-        if (num_online_nodes() > 1) {
-                printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
-                setup_clear_cpu_cap(X86_FEATURE_TSC);
-        }
-}
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index e0f571d58c19..94da4d52d798 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -29,6 +29,7 @@
 #include <asm/desc.h>
 #include <asm/setup.h>
 #include <asm/arch_hooks.h>
+#include <asm/pgtable.h>
 #include <asm/time.h>
 #include <asm/pgalloc.h>
 #include <asm/irq.h>
@@ -123,6 +124,7 @@ static void *get_call_destination(u8 type)
                 .pv_irq_ops = pv_irq_ops,
                 .pv_apic_ops = pv_apic_ops,
                 .pv_mmu_ops = pv_mmu_ops,
+                .pv_lock_ops = pv_lock_ops,
         };
         return *((void **)&tmpl + type);
 }
@@ -266,6 +268,17 @@ enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
         return __get_cpu_var(paravirt_lazy_mode);
 }
 
+void __init paravirt_use_bytelocks(void)
+{
+#ifdef CONFIG_SMP
+        pv_lock_ops.spin_is_locked = __byte_spin_is_locked;
+        pv_lock_ops.spin_is_contended = __byte_spin_is_contended;
+        pv_lock_ops.spin_lock = __byte_spin_lock;
+        pv_lock_ops.spin_trylock = __byte_spin_trylock;
+        pv_lock_ops.spin_unlock = __byte_spin_unlock;
+#endif
+}
+
 struct pv_info pv_info = {
         .name = "bare hardware",
         .paravirt_enabled = 0,
@@ -361,7 +374,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 struct pv_apic_ops pv_apic_ops = {
 #ifdef CONFIG_X86_LOCAL_APIC
         .apic_write = native_apic_write,
-        .apic_write_atomic = native_apic_write_atomic,
         .apic_read = native_apic_read,
         .setup_boot_clock = setup_boot_APIC_clock,
         .setup_secondary_clock = setup_secondary_APIC_clock,
@@ -373,6 +385,9 @@ struct pv_mmu_ops pv_mmu_ops = {
 #ifndef CONFIG_X86_64
         .pagetable_setup_start = native_pagetable_setup_start,
         .pagetable_setup_done = native_pagetable_setup_done,
+#else
+        .pagetable_setup_start = paravirt_nop,
+        .pagetable_setup_done = paravirt_nop,
 #endif
 
         .read_cr2 = native_read_cr2,
@@ -428,7 +443,7 @@ struct pv_mmu_ops pv_mmu_ops = {
 #endif /* PAGETABLE_LEVELS >= 3 */
 
         .pte_val = native_pte_val,
-        .pte_flags = native_pte_val,
+        .pte_flags = native_pte_flags,
         .pgd_val = native_pgd_val,
 
         .make_pte = native_make_pte,
@@ -446,6 +461,18 @@ struct pv_mmu_ops pv_mmu_ops = {
         .set_fixmap = native_set_fixmap,
 };
 
+struct pv_lock_ops pv_lock_ops = {
+#ifdef CONFIG_SMP
+        .spin_is_locked = __ticket_spin_is_locked,
+        .spin_is_contended = __ticket_spin_is_contended,
+
+        .spin_lock = __ticket_spin_lock,
+        .spin_trylock = __ticket_spin_trylock,
+        .spin_unlock = __ticket_spin_unlock,
+#endif
+};
+EXPORT_SYMBOL_GPL(pv_lock_ops);
+
 EXPORT_SYMBOL_GPL(pv_time_ops);
 EXPORT_SYMBOL    (pv_cpu_ops);
 EXPORT_SYMBOL    (pv_mmu_ops);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 6959b5c45df4..b67a4b1d4eae 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -29,6 +29,7 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/crash_dump.h>
 #include <linux/dma-mapping.h>
 #include <linux/bitops.h>
 #include <linux/pci_ids.h>
@@ -36,7 +37,8 @@
 #include <linux/delay.h>
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
-#include <asm/gart.h>
+
+#include <asm/iommu.h>
 #include <asm/calgary.h>
 #include <asm/tce.h>
 #include <asm/pci-direct.h>
@@ -167,6 +169,8 @@ static void calgary_dump_error_regs(struct iommu_table *tbl);
 static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
 static void calioc2_tce_cache_blast(struct iommu_table *tbl);
 static void calioc2_dump_error_regs(struct iommu_table *tbl);
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl);
+static void get_tce_space_from_tar(void);
 
 static struct cal_chipset_ops calgary_chip_ops = {
         .handle_quirks = calgary_handle_quirks,
@@ -410,22 +414,6 @@ static void calgary_unmap_sg(struct device *dev,
         }
 }
 
-static int calgary_nontranslate_map_sg(struct device* dev,
-        struct scatterlist *sg, int nelems, int direction)
-{
-        struct scatterlist *s;
-        int i;
-
-        for_each_sg(sg, s, nelems, i) {
-                struct page *p = sg_page(s);
-
-                BUG_ON(!p);
-                s->dma_address = virt_to_bus(sg_virt(s));
-                s->dma_length = s->length;
-        }
-        return nelems;
-}
-
 static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
         int nelems, int direction)
 {
@@ -436,9 +424,6 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
         unsigned long entry;
         int i;
 
-        if (!translation_enabled(tbl))
-                return calgary_nontranslate_map_sg(dev, sg, nelems, direction);
-
         for_each_sg(sg, s, nelems, i) {
                 BUG_ON(!sg_page(s));
 
@@ -474,7 +459,6 @@ error:
 static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
         size_t size, int direction)
 {
-        dma_addr_t dma_handle = bad_dma_address;
         void *vaddr = phys_to_virt(paddr);
         unsigned long uaddr;
         unsigned int npages;
@@ -483,12 +467,7 @@ static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
         uaddr = (unsigned long)vaddr;
         npages = num_dma_pages(uaddr, size);
 
-        if (translation_enabled(tbl))
-                dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction);
-        else
-                dma_handle = virt_to_bus(vaddr);
-
-        return dma_handle;
+        return iommu_alloc(dev, tbl, vaddr, npages, direction);
 }
 
 static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
@@ -497,9 +476,6 @@ static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
         struct iommu_table *tbl = find_iommu_table(dev);
         unsigned int npages;
 
-        if (!translation_enabled(tbl))
-                return;
-
         npages = num_dma_pages(dma_handle, size);
         iommu_free(tbl, dma_handle, npages);
 }
@@ -522,18 +498,12 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size,
                 goto error;
         memset(ret, 0, size);
 
-        if (translation_enabled(tbl)) {
-                /* set up tces to cover the allocated range */
-                mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
-                if (mapping == bad_dma_address)
-                        goto free;
-
-                *dma_handle = mapping;
-        } else /* non translated slot */
-                *dma_handle = virt_to_bus(ret);
-
+        /* set up tces to cover the allocated range */
+        mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
+        if (mapping == bad_dma_address)
+                goto free;
+        *dma_handle = mapping;
         return ret;
-
 free:
         free_pages((unsigned long)ret, get_order(size));
         ret = NULL;
@@ -541,7 +511,7 @@ error:
         return ret;
 }
 
-static const struct dma_mapping_ops calgary_dma_ops = {
+static struct dma_mapping_ops calgary_dma_ops = {
         .alloc_coherent = calgary_alloc_coherent,
         .map_single = calgary_map_single,
         .unmap_single = calgary_unmap_single,
@@ -830,7 +800,11 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar)
 
         tbl = pci_iommu(dev->bus);
         tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
-        tce_free(tbl, 0, tbl->it_size);
+
+        if (is_kdump_kernel())
+                calgary_init_bitmap_from_tce_table(tbl);
+        else
+                tce_free(tbl, 0, tbl->it_size);
 
         if (is_calgary(dev->device))
                 tbl->chip_ops = &calgary_chip_ops;
@@ -1209,6 +1183,10 @@ static int __init calgary_init(void)
         if (ret)
                 return ret;
 
+        /* Purely for kdump kernel case */
+        if (is_kdump_kernel())
+                get_tce_space_from_tar();
+
         do {
                 dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev);
                 if (!dev)
@@ -1230,6 +1208,16 @@ static int __init calgary_init(void)
                         goto error;
         } while (1);
 
+        dev = NULL;
+        for_each_pci_dev(dev) {
+                struct iommu_table *tbl;
+
+                tbl = find_iommu_table(&dev->dev);
+
+                if (translation_enabled(tbl))
+                        dev->dev.archdata.dma_ops = &calgary_dma_ops;
+        }
+
         return ret;
 
 error:
@@ -1251,6 +1239,7 @@ error:
                 calgary_disable_translation(dev);
                 calgary_free_bus(dev);
                 pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */
+                dev->dev.archdata.dma_ops = NULL;
         } while (1);
 
         return ret;
@@ -1339,6 +1328,61 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev)
         return (val != 0xffffffff);
 }
 
+/*
+ * calgary_init_bitmap_from_tce_table():
+ * Funtion for kdump case. In the second/kdump kernel initialize
+ * the bitmap based on the tce table entries obtained from first kernel
+ */
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
+{
+        u64 *tp;
+        unsigned int index;
+        tp = ((u64 *)tbl->it_base);
+        for (index = 0 ; index < tbl->it_size; index++) {
+                if (*tp != 0x0)
+                        set_bit(index, tbl->it_map);
+                tp++;
+        }
+}
+
+/*
+ * get_tce_space_from_tar():
+ * Function for kdump case. Get the tce tables from first kernel
+ * by reading the contents of the base adress register of calgary iommu
+ */
+static void get_tce_space_from_tar()
+{
+        int bus;
+        void __iomem *target;
+        unsigned long tce_space;
+
+        for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
+                struct calgary_bus_info *info = &bus_info[bus];
+                unsigned short pci_device;
+                u32 val;
+
+                val = read_pci_config(bus, 0, 0, 0);
+                pci_device = (val & 0xFFFF0000) >> 16;
+
+                if (!is_cal_pci_dev(pci_device))
+                        continue;
+                if (info->translation_disabled)
+                        continue;
+
+                if (calgary_bus_has_devices(bus, pci_device) ||
+                                                translate_empty_slots) {
+                        target = calgary_reg(bus_info[bus].bbar,
+                                                tar_offset(bus));
+                        tce_space = be64_to_cpu(readq(target));
+                        tce_space = tce_space & TAR_SW_BITS;
+
+                        tce_space = tce_space & (~specified_table_size);
+                        info->tce_space = (u64 *)__va(tce_space);
+                }
+        }
+        return;
+}
+
 void __init detect_calgary(void)
 {
         int bus;
@@ -1394,7 +1438,8 @@ void __init detect_calgary(void)
                 return;
         }
 
-        specified_table_size = determine_tce_table_size(max_pfn * PAGE_SIZE);
+        specified_table_size = determine_tce_table_size((is_kdump_kernel() ?
+                                        saved_max_pfn : max_pfn) * PAGE_SIZE);
 
         for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
                 struct calgary_bus_info *info = &bus_info[bus];
@@ -1412,10 +1457,16 @@ void __init detect_calgary(void)
 
                 if (calgary_bus_has_devices(bus, pci_device) ||
                     translate_empty_slots) {
-                        tbl = alloc_tce_table();
-                        if (!tbl)
-                                goto cleanup;
-                        info->tce_space = tbl;
+                        /*
+                         * If it is kdump kernel, find and use tce tables
+                         * from first kernel, else allocate tce tables here
+                         */
+                        if (!is_kdump_kernel()) {
+                                tbl = alloc_tce_table();
+                                if (!tbl)
+                                        goto cleanup;
+                                info->tce_space = tbl;
+                        }
                         calgary_found = 1;
                 }
         }
@@ -1430,6 +1481,10 @@ void __init detect_calgary(void)
                 printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
                        "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
                        debugging ? "enabled" : "disabled");
+
+                /* swiotlb for devices that aren't behind the Calgary. */
+                if (max_pfn > MAX_DMA32_PFN)
+                        swiotlb = 1;
         }
         return;
 
@@ -1446,7 +1501,7 @@ int __init calgary_iommu_init(void)
 {
         int ret;
 
-        if (no_iommu || swiotlb)
+        if (no_iommu || (swiotlb && !calgary_detected))
                 return -ENODEV;
 
         if (!calgary_detected)
@@ -1459,15 +1514,14 @@ int __init calgary_iommu_init(void)
         if (ret) {
                 printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
                        "falling back to no_iommu\n", ret);
-                if (max_pfn > MAX_DMA32_PFN)
-                        printk(KERN_ERR "WARNING more than 4GB of memory, "
-                                        "32bit PCI may malfunction.\n");
                 return ret;
         }
 
         force_iommu = 1;
         bad_dma_address = 0x0;
-        dma_ops = &calgary_dma_ops;
+        /* dma_ops is set to swiotlb or nommu */
+        if (!dma_ops)
+                dma_ops = &nommu_dma_ops;
 
         return 0;
 }
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index b7dd70fda031..8dbffb846de9 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -5,14 +5,13 @@
 
 #include <asm/proto.h>
 #include <asm/dma.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/calgary.h>
 #include <asm/amd_iommu.h>
 
-int forbid_dac __read_mostly;
-EXPORT_SYMBOL(forbid_dac);
+static int forbid_dac __read_mostly;
 
-const struct dma_mapping_ops *dma_ops;
+struct dma_mapping_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 static int iommu_sac_force __read_mostly;
@@ -114,21 +113,15 @@ void __init pci_iommu_alloc(void)
          * The order of these functions is important for
          * fall-back/fail-over reasons
          */
-#ifdef CONFIG_GART_IOMMU
         gart_iommu_hole_init();
-#endif
 
-#ifdef CONFIG_CALGARY_IOMMU
         detect_calgary();
-#endif
 
         detect_intel_iommu();
 
         amd_iommu_detect();
 
-#ifdef CONFIG_SWIOTLB
         pci_swiotlb_init();
-#endif
 }
 #endif
 
@@ -184,9 +177,7 @@ static __init int iommu_setup(char *p)
                         swiotlb = 1;
 #endif
 
-#ifdef CONFIG_GART_IOMMU
                 gart_parse_options(p);
-#endif
 
 #ifdef CONFIG_CALGARY_IOMMU
                 if (!strncmp(p, "calgary", 7))
@@ -203,16 +194,17 @@ early_param("iommu", iommu_setup);
 
 int dma_supported(struct device *dev, u64 mask)
 {
+        struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 #ifdef CONFIG_PCI
         if (mask > 0xffffffff && forbid_dac > 0) {
-                printk(KERN_INFO "PCI: Disallowing DAC for device %s\n",
-                                 dev->bus_id);
+                dev_info(dev, "PCI: Disallowing DAC for device\n");
                 return 0;
         }
 #endif
 
-        if (dma_ops->dma_supported)
-                return dma_ops->dma_supported(dev, mask);
+        if (ops->dma_supported)
+                return ops->dma_supported(dev, mask);
 
         /* Copied from i386. Doesn't make much sense, because it will
            only work for pci_alloc_coherent.
@@ -233,8 +225,7 @@ int dma_supported(struct device *dev, u64 mask)
            type. Normally this doesn't make any difference, but gives
            more gentle handling of IOMMU overflow. */
         if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
-                printk(KERN_INFO "%s: Force SAC with mask %Lx\n",
-                                 dev->bus_id, mask);
+                dev_info(dev, "Force SAC with mask %Lx\n", mask);
                 return 0;
         }
 
@@ -260,6 +251,7 @@ void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
                    gfp_t gfp)
 {
+        struct dma_mapping_ops *ops = get_dma_ops(dev);
         void *memory = NULL;
         struct page *page;
         unsigned long dma_mask = 0;
@@ -328,8 +320,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
                         /* Let low level make its own zone decisions */
                         gfp &= ~(GFP_DMA32|GFP_DMA);
 
-                        if (dma_ops->alloc_coherent)
-                                return dma_ops->alloc_coherent(dev, size,
+                        if (ops->alloc_coherent)
+                                return ops->alloc_coherent(dev, size,
                                                            dma_handle, gfp);
                         return NULL;
                 }
@@ -341,14 +333,14 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
                 }
         }
 
-        if (dma_ops->alloc_coherent) {
+        if (ops->alloc_coherent) {
                 free_pages((unsigned long)memory, get_order(size));
                 gfp &= ~(GFP_DMA|GFP_DMA32);
-                return dma_ops->alloc_coherent(dev, size, dma_handle, gfp);
+                return ops->alloc_coherent(dev, size, dma_handle, gfp);
         }
 
-        if (dma_ops->map_simple) {
-                *dma_handle = dma_ops->map_simple(dev, virt_to_phys(memory),
+        if (ops->map_simple) {
+                *dma_handle = ops->map_simple(dev, virt_to_phys(memory),
                                               size,
                                               PCI_DMA_BIDIRECTIONAL);
                 if (*dma_handle != bad_dma_address)
@@ -370,29 +362,27 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_coherent(struct device *dev, size_t size,
                          void *vaddr, dma_addr_t bus)
 {
+        struct dma_mapping_ops *ops = get_dma_ops(dev);
+
         int order = get_order(size);
         WARN_ON(irqs_disabled());       /* for portability */
         if (dma_release_from_coherent(dev, order, vaddr))
                 return;
-        if (dma_ops->unmap_single)
-                dma_ops->unmap_single(dev, bus, size, 0);
+        if (ops->unmap_single)
+                ops->unmap_single(dev, bus, size, 0);
         free_pages((unsigned long)vaddr, order);
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
 static int __init pci_iommu_init(void)
 {
-#ifdef CONFIG_CALGARY_IOMMU
         calgary_iommu_init();
-#endif
 
         intel_iommu_init();
 
         amd_iommu_init();
 
-#ifdef CONFIG_GART_IOMMU
         gart_iommu_init();
-#endif
 
         no_iommu_init();
         return 0;
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index c3fe78406d18..744126e64950 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -32,6 +32,7 @@
 #include <asm/mtrr.h>
 #include <asm/pgtable.h>
 #include <asm/proto.h>
+#include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/cacheflush.h>
 #include <asm/swiotlb.h>
@@ -197,9 +198,7 @@ static void iommu_full(struct device *dev, size_t size, int dir)
          * out. Hopefully no network devices use single mappings that big.
          */
 
-        printk(KERN_ERR
-                "PCI-DMA: Out of IOMMU space for %lu bytes at device %s\n",
-                size, dev->bus_id);
+        dev_err(dev, "PCI-DMA: Out of IOMMU space for %lu bytes\n", size);
 
         if (size > PAGE_SIZE*EMERGENCY_PAGES) {
                 if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL)
@@ -693,8 +692,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 extern int agp_amd64_init(void);
 
-static const struct dma_mapping_ops gart_dma_ops = {
-        .mapping_error                  = NULL,
+static struct dma_mapping_ops gart_dma_ops = {
         .map_single                     = gart_map_single,
         .map_simple                     = gart_map_simple,
         .unmap_single                   = gart_unmap_single,
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index aec43d56f49c..3f91f71cdc3e 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -7,7 +7,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/processor.h>
 #include <asm/dma.h>
 
@@ -72,21 +72,9 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
         return nents;
 }
 
-/* Make sure we keep the same behaviour */
-static int nommu_mapping_error(dma_addr_t dma_addr)
-{
-#ifdef CONFIG_X86_32
-        return 0;
-#else
-        return (dma_addr == bad_dma_address);
-#endif
-}
-
-
-const struct dma_mapping_ops nommu_dma_ops = {
+struct dma_mapping_ops nommu_dma_ops = {
         .map_single = nommu_map_single,
         .map_sg = nommu_map_sg,
-        .mapping_error = nommu_mapping_error,
         .is_phys = 1,
 };
 
diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c
index 82299cd1d04d..c4ce0332759e 100644
--- a/arch/x86/kernel/pci-swiotlb_64.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
@@ -5,7 +5,7 @@
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/swiotlb.h>
 #include <asm/dma.h>
 
@@ -18,7 +18,7 @@ swiotlb_map_single_phys(struct device *hwdev, phys_addr_t paddr, size_t size,
         return swiotlb_map_single(hwdev, phys_to_virt(paddr), size, direction);
 }
 
-const struct dma_mapping_ops swiotlb_dma_ops = {
+struct dma_mapping_ops swiotlb_dma_ops = {
         .mapping_error = swiotlb_dma_mapping_error,
         .alloc_coherent = swiotlb_alloc_coherent,
         .free_coherent = swiotlb_free_coherent,
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 4d629c62f4f8..7fc4d5b0a6a0 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -15,6 +15,7 @@ unsigned long idle_nomwait;
 EXPORT_SYMBOL(idle_nomwait);
 
 struct kmem_cache *task_xstate_cachep;
+static int force_mwait __cpuinitdata;
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
@@ -199,6 +200,7 @@ static void poll_idle(void)
  *
  * idle=mwait overrides this decision and forces the usage of mwait.
  */
+static int __cpuinitdata force_mwait;
 
 #define MWAIT_INFO                      0x05
 #define MWAIT_ECX_EXTENDED_INFO         0x01
@@ -326,6 +328,9 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 
 static int __init idle_setup(char *str)
 {
+        if (!str)
+                return -EINVAL;
+
         if (!strcmp(str, "poll")) {
                 printk("using polling idle threads.\n");
                 pm_idle = poll_idle;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 0c3927accb00..53bc653ed5ca 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -128,7 +128,7 @@ void cpu_idle(void)
 
         /* endless idle loop with no priority at all */
         while (1) {
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 while (!need_resched()) {
 
                         check_pgt_cache();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index a8e53626ac9a..3fb62a7d9a16 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -120,7 +120,7 @@ void cpu_idle(void)
         current_thread_info()->status |= TS_POLLING;
         /* endless idle loop with no priority at all */
         while (1) {
-                tick_nohz_stop_sched_tick();
+                tick_nohz_stop_sched_tick(1);
                 while (!need_resched()) {
 
                         rmb();
@@ -537,8 +537,8 @@ static inline void __switch_to_xtra(struct task_struct *prev_p,
 struct task_struct *
 __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 {
-        struct thread_struct *prev = &prev_p->thread,
-                                 *next = &next_p->thread;
+        struct thread_struct *prev = &prev_p->thread;
+        struct thread_struct *next = &next_p->thread;
         int cpu = smp_processor_id();
         struct tss_struct *tss = &per_cpu(init_tss, cpu);
         unsigned fsindex, gsindex;
@@ -586,35 +586,34 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
         /* 
          * Switch FS and GS.
+         *
+         * Segment register != 0 always requires a reload.  Also
+         * reload when it has changed.  When prev process used 64bit
+         * base always reload to avoid an information leak.
          */
-        { 
-                /* segment register != 0 always requires a reload. 
-                   also reload when it has changed. 
-                   when prev process used 64bit base always reload
-                   to avoid an information leak. */
-                if (unlikely(fsindex | next->fsindex | prev->fs)) {
-                        loadsegment(fs, next->fsindex);
-                        /* check if the user used a selector != 0
-                         * if yes clear 64bit base, since overloaded base
-                         * is always mapped to the Null selector
-                         */
-                        if (fsindex)
+        if (unlikely(fsindex | next->fsindex | prev->fs)) {
+                loadsegment(fs, next->fsindex);
+                /* 
+                 * Check if the user used a selector != 0; if yes
+                 *  clear 64bit base, since overloaded base is always
+                 *  mapped to the Null selector
+                 */
+                if (fsindex)
                         prev->fs = 0;                           
-                }
-                /* when next process has a 64bit base use it */
-                if (next->fs) 
-                        wrmsrl(MSR_FS_BASE, next->fs); 
-                prev->fsindex = fsindex;
-
-                if (unlikely(gsindex | next->gsindex | prev->gs)) {
-                        load_gs_index(next->gsindex);
-                        if (gsindex)
+        }
+        /* when next process has a 64bit base use it */
+        if (next->fs)
+                wrmsrl(MSR_FS_BASE, next->fs);
+        prev->fsindex = fsindex;
+
+        if (unlikely(gsindex | next->gsindex | prev->gs)) {
+                load_gs_index(next->gsindex);
+                if (gsindex)
                         prev->gs = 0;                           
-                }
-                if (next->gs)
-                        wrmsrl(MSR_KERNEL_GS_BASE, next->gs); 
-                prev->gsindex = gsindex;
         }
+        if (next->gs)
+                wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
+        prev->gsindex = gsindex;
 
         /* Must be after DS reload */
         unlazy_fpu(prev_p);
@@ -627,7 +626,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
         write_pda(pcurrent, next_p); 
 
         write_pda(kernelstack,
-        (unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET);
+                  (unsigned long)task_stack_page(next_p) +
+                  THREAD_SIZE - PDA_STACKOFFSET);
 #ifdef CONFIG_CC_STACKPROTECTOR
         write_pda(stack_canary, next_p->stack_canary);
         /*
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 77040b6070e1..e37dccce85db 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1357,8 +1357,6 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 #endif
 }
 
-#ifdef CONFIG_X86_32
-
 void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 {
         struct siginfo info;
@@ -1377,89 +1375,10 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
         force_sig_info(SIGTRAP, &info, tsk);
 }
 
-/* notification of system call entry/exit
- * - triggered by current->work.syscall_trace
- */
-int do_syscall_trace(struct pt_regs *regs, int entryexit)
-{
-        int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU);
-        /*
-         * With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall
-         * interception
-         */
-        int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP);
-        int ret = 0;
-
-        /* do the secure computing check first */
-        if (!entryexit)
-                secure_computing(regs->orig_ax);
-
-        if (unlikely(current->audit_context)) {
-                if (entryexit)
-                        audit_syscall_exit(AUDITSC_RESULT(regs->ax),
-                                                regs->ax);
-                /* Debug traps, when using PTRACE_SINGLESTEP, must be sent only
-                 * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is
-                 * not used, entry.S will call us only on syscall exit, not
-                 * entry; so when TIF_SYSCALL_AUDIT is used we must avoid
-                 * calling send_sigtrap() on syscall entry.
-                 *
-                 * Note that when PTRACE_SYSEMU_SINGLESTEP is used,
-                 * is_singlestep is false, despite his name, so we will still do
-                 * the correct thing.
-                 */
-                else if (is_singlestep)
-                        goto out;
-        }
-
-        if (!(current->ptrace & PT_PTRACED))
-                goto out;
-
-        /* If a process stops on the 1st tracepoint with SYSCALL_TRACE
-         * and then is resumed with SYSEMU_SINGLESTEP, it will come in
-         * here. We have to check this and return */
-        if (is_sysemu && entryexit)
-                return 0;
-
-        /* Fake a debug trap */
-        if (is_singlestep)
-                send_sigtrap(current, regs, 0);
-
-        if (!test_thread_flag(TIF_SYSCALL_TRACE) && !is_sysemu)
-                goto out;
-
-        /* the 0x80 provides a way for the tracing parent to distinguish
-           between a syscall stop and SIGTRAP delivery */
-        /* Note that the debugger could change the result of test_thread_flag!*/
-        ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80:0));
-
-        /*
-         * this isn't the same as continuing with a signal, but it will do
-         * for normal use.  strace only continues with a signal if the
-         * stopping signal is not SIGTRAP.  -brl
-         */
-        if (current->exit_code) {
-                send_sig(current->exit_code, current, 1);
-                current->exit_code = 0;
-        }
-        ret = is_sysemu;
-out:
-        if (unlikely(current->audit_context) && !entryexit)
-                audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_ax,
-                                    regs->bx, regs->cx, regs->dx, regs->si);
-        if (ret == 0)
-                return 0;
-
-        regs->orig_ax = -1; /* force skip of syscall restarting */
-        if (unlikely(current->audit_context))
-                audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
-        return 1;
-}
-
-#else  /* CONFIG_X86_64 */
-
 static void syscall_trace(struct pt_regs *regs)
 {
+        if (!(current->ptrace & PT_PTRACED))
+                return;
 
 #if 0
         printk("trace %s ip %lx sp %lx ax %d origrax %d caller %lx tiflags %x ptrace %x\n",
@@ -1481,39 +1400,81 @@ static void syscall_trace(struct pt_regs *regs)
         }
 }
 
-asmlinkage void syscall_trace_enter(struct pt_regs *regs)
+#ifdef CONFIG_X86_32
+# define IS_IA32        1
+#elif defined CONFIG_IA32_EMULATION
+# define IS_IA32        test_thread_flag(TIF_IA32)
+#else
+# define IS_IA32        0
+#endif
+
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+asmregparm long syscall_trace_enter(struct pt_regs *regs)
 {
+        long ret = 0;
+
+        /*
+         * If we stepped into a sysenter/syscall insn, it trapped in
+         * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
+         * If user-mode had set TF itself, then it's still clear from
+         * do_debug() and we need to set it again to restore the user
+         * state.  If we entered on the slow path, TF was already set.
+         */
+        if (test_thread_flag(TIF_SINGLESTEP))
+                regs->flags |= X86_EFLAGS_TF;
+
         /* do the secure computing check first */
         secure_computing(regs->orig_ax);
 
-        if (test_thread_flag(TIF_SYSCALL_TRACE)
-            && (current->ptrace & PT_PTRACED))
+        if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
+                ret = -1L;
+
+        if (ret || test_thread_flag(TIF_SYSCALL_TRACE))
                 syscall_trace(regs);
 
         if (unlikely(current->audit_context)) {
-                if (test_thread_flag(TIF_IA32)) {
+                if (IS_IA32)
                         audit_syscall_entry(AUDIT_ARCH_I386,
                                             regs->orig_ax,
                                             regs->bx, regs->cx,
                                             regs->dx, regs->si);
-                } else {
+#ifdef CONFIG_X86_64
+                else
                         audit_syscall_entry(AUDIT_ARCH_X86_64,
                                             regs->orig_ax,
                                             regs->di, regs->si,
                                             regs->dx, regs->r10);
-                }
+#endif
         }
+
+        return ret ?: regs->orig_ax;
 }
 
-asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+asmregparm void syscall_trace_leave(struct pt_regs *regs)
 {
         if (unlikely(current->audit_context))
                 audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
 
-        if ((test_thread_flag(TIF_SYSCALL_TRACE)
-             || test_thread_flag(TIF_SINGLESTEP))
-            && (current->ptrace & PT_PTRACED))
+        if (test_thread_flag(TIF_SYSCALL_TRACE))
                 syscall_trace(regs);
-}
 
-#endif  /* CONFIG_X86_32 */
+        /*
+         * If TIF_SYSCALL_EMU is set, we only get here because of
+         * TIF_SINGLESTEP (i.e. this is PTRACE_SYSEMU_SINGLESTEP).
+         * We already reported this syscall instruction in
+         * syscall_trace_enter(), so don't do any more now.
+         */
+        if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
+                return;
+
+        /*
+         * If we are single-stepping, synthesize a trap to follow the
+         * system call instruction.
+         */
+        if (test_thread_flag(TIF_SINGLESTEP) &&
+            (current->ptrace & PT_PTRACED))
+                send_sigtrap(current, regs, 0);
+}
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f8a62160e151..06a9f643817e 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -177,6 +177,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
                         DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
                 },
         },
+        {       /* Handle problems with rebooting on Dell T5400's */
+                .callback = set_bios_reboot,
+                .ident = "Dell Precision T5400",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
+                },
+        },
         {       /* Handle problems with rebooting on HP laptops */
                 .callback = set_bios_reboot,
                 .ident = "HP Compaq Laptop",
@@ -403,24 +411,28 @@ void native_machine_shutdown(void)
 {
         /* Stop the cpus and apics */
 #ifdef CONFIG_SMP
-        int reboot_cpu_id;
 
         /* The boot cpu is always logical cpu 0 */
-        reboot_cpu_id = 0;
+        int reboot_cpu_id = 0;
+        cpumask_of_cpu_ptr(newmask, reboot_cpu_id);
 
 #ifdef CONFIG_X86_32
         /* See if there has been given a command line override */
         if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) &&
-                cpu_online(reboot_cpu))
+                cpu_online(reboot_cpu)) {
                 reboot_cpu_id = reboot_cpu;
+                cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
+        }
 #endif
 
         /* Make certain the cpu I'm about to reboot on is online */
-        if (!cpu_online(reboot_cpu_id))
+        if (!cpu_online(reboot_cpu_id)) {
                 reboot_cpu_id = smp_processor_id();
+                cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
+        }
 
         /* Make certain I only run on the appropriate processor */
-        set_cpus_allowed_ptr(current, &cpumask_of_cpu(reboot_cpu_id));
+        set_cpus_allowed_ptr(current, newmask);
 
         /* O.K Now that I'm on the appropriate processor,
          * stop all of the others.
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index c30fe25d470d..703310a99023 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -20,11 +20,44 @@
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define PAE_PGD_ATTR (_PAGE_PRESENT)
 
+/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are
+ * used to save some data for jumping back
+ */
+#define DATA(offset)            (PAGE_SIZE/2+(offset))
+
+/* Minimal CPU state */
+#define ESP                     DATA(0x0)
+#define CR0                     DATA(0x4)
+#define CR3                     DATA(0x8)
+#define CR4                     DATA(0xc)
+
+/* other data */
+#define CP_VA_CONTROL_PAGE      DATA(0x10)
+#define CP_PA_PGD               DATA(0x14)
+#define CP_PA_SWAP_PAGE         DATA(0x18)
+#define CP_PA_BACKUP_PAGES_MAP  DATA(0x1c)
+
         .text
         .align PAGE_SIZE
         .globl relocate_kernel
 relocate_kernel:
-        movl    8(%esp), %ebp /* list of pages */
+        /* Save the CPU context, used for jumping back */
+
+        pushl   %ebx
+        pushl   %esi
+        pushl   %edi
+        pushl   %ebp
+        pushf
+
+        movl    20+8(%esp), %ebp /* list of pages */
+        movl    PTR(VA_CONTROL_PAGE)(%ebp), %edi
+        movl    %esp, ESP(%edi)
+        movl    %cr0, %eax
+        movl    %eax, CR0(%edi)
+        movl    %cr3, %eax
+        movl    %eax, CR3(%edi)
+        movl    %cr4, %eax
+        movl    %eax, CR4(%edi)
 
 #ifdef CONFIG_X86_PAE
         /* map the control page at its virtual address */
@@ -138,15 +171,25 @@ relocate_kernel:
 
 relocate_new_kernel:
         /* read the arguments and say goodbye to the stack */
-        movl  4(%esp), %ebx /* page_list */
-        movl  8(%esp), %ebp /* list of pages */
-        movl  12(%esp), %edx /* start address */
-        movl  16(%esp), %ecx /* cpu_has_pae */
+        movl  20+4(%esp), %ebx /* page_list */
+        movl  20+8(%esp), %ebp /* list of pages */
+        movl  20+12(%esp), %edx /* start address */
+        movl  20+16(%esp), %ecx /* cpu_has_pae */
+        movl  20+20(%esp), %esi /* preserve_context */
 
         /* zero out flags, and disable interrupts */
         pushl $0
         popfl
 
+        /* save some information for jumping back */
+        movl    PTR(VA_CONTROL_PAGE)(%ebp), %edi
+        movl    %edi, CP_VA_CONTROL_PAGE(%edi)
+        movl    PTR(PA_PGD)(%ebp), %eax
+        movl    %eax, CP_PA_PGD(%edi)
+        movl    PTR(PA_SWAP_PAGE)(%ebp), %eax
+        movl    %eax, CP_PA_SWAP_PAGE(%edi)
+        movl    %ebx, CP_PA_BACKUP_PAGES_MAP(%edi)
+
         /* get physical address of control page now */
         /* this is impossible after page table switch */
         movl    PTR(PA_CONTROL_PAGE)(%ebp), %edi
@@ -197,8 +240,90 @@ identity_mapped:
         xorl    %eax, %eax
         movl    %eax, %cr3
 
+        movl    CP_PA_SWAP_PAGE(%edi), %eax
+        pushl   %eax
+        pushl   %ebx
+        call    swap_pages
+        addl    $8, %esp
+
+        /* To be certain of avoiding problems with self-modifying code
+         * I need to execute a serializing instruction here.
+         * So I flush the TLB, it's handy, and not processor dependent.
+         */
+        xorl    %eax, %eax
+        movl    %eax, %cr3
+
+        /* set all of the registers to known values */
+        /* leave %esp alone */
+
+        testl   %esi, %esi
+        jnz 1f
+        xorl    %edi, %edi
+        xorl    %eax, %eax
+        xorl    %ebx, %ebx
+        xorl    %ecx, %ecx
+        xorl    %edx, %edx
+        xorl    %esi, %esi
+        xorl    %ebp, %ebp
+        ret
+1:
+        popl    %edx
+        movl    CP_PA_SWAP_PAGE(%edi), %esp
+        addl    $PAGE_SIZE, %esp
+2:
+        call    *%edx
+
+        /* get the re-entry point of the peer system */
+        movl    0(%esp), %ebp
+        call    1f
+1:
+        popl    %ebx
+        subl    $(1b - relocate_kernel), %ebx
+        movl    CP_VA_CONTROL_PAGE(%ebx), %edi
+        lea     PAGE_SIZE(%ebx), %esp
+        movl    CP_PA_SWAP_PAGE(%ebx), %eax
+        movl    CP_PA_BACKUP_PAGES_MAP(%ebx), %edx
+        pushl   %eax
+        pushl   %edx
+        call    swap_pages
+        addl    $8, %esp
+        movl    CP_PA_PGD(%ebx), %eax
+        movl    %eax, %cr3
+        movl    %cr0, %eax
+        orl     $(1<<31), %eax
+        movl    %eax, %cr0
+        lea     PAGE_SIZE(%edi), %esp
+        movl    %edi, %eax
+        addl    $(virtual_mapped - relocate_kernel), %eax
+        pushl   %eax
+        ret
+
+virtual_mapped:
+        movl    CR4(%edi), %eax
+        movl    %eax, %cr4
+        movl    CR3(%edi), %eax
+        movl    %eax, %cr3
+        movl    CR0(%edi), %eax
+        movl    %eax, %cr0
+        movl    ESP(%edi), %esp
+        movl    %ebp, %eax
+
+        popf
+        popl    %ebp
+        popl    %edi
+        popl    %esi
+        popl    %ebx
+        ret
+
         /* Do the copies */
-        movl    %ebx, %ecx
+swap_pages:
+        movl    8(%esp), %edx
+        movl    4(%esp), %ecx
+        pushl   %ebp
+        pushl   %ebx
+        pushl   %edi
+        pushl   %esi
+        movl    %ecx, %ebx
         jmp     1f
 
 0:      /* top, read another word from the indirection page */
@@ -226,27 +351,28 @@ identity_mapped:
         movl    %ecx,   %esi /* For every source page do a copy */
         andl    $0xfffff000, %esi
 
+        movl    %edi, %eax
+        movl    %esi, %ebp
+
+        movl    %edx, %edi
         movl    $1024, %ecx
         rep ; movsl
-        jmp     0b
 
-3:
-
-        /* To be certain of avoiding problems with self-modifying code
-         * I need to execute a serializing instruction here.
-         * So I flush the TLB, it's handy, and not processor dependent.
-         */
-        xorl    %eax, %eax
-        movl    %eax, %cr3
+        movl    %ebp, %edi
+        movl    %eax, %esi
+        movl    $1024, %ecx
+        rep ; movsl
 
-        /* set all of the registers to known values */
-        /* leave %esp alone */
+        movl    %eax, %edi
+        movl    %edx, %esi
+        movl    $1024, %ecx
+        rep ; movsl
 
-        xorl    %eax, %eax
-        xorl    %ebx, %ebx
-        xorl    %ecx, %ecx
-        xorl    %edx, %edx
-        xorl    %esi, %esi
-        xorl    %edi, %edi
-        xorl    %ebp, %ebp
+        lea     PAGE_SIZE(%ebp), %esi
+        jmp     0b
+3:
+        popl    %esi
+        popl    %edi
+        popl    %ebx
+        popl    %ebp
         ret
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 531b55b8e81a..b520dae02bf4 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -57,12 +57,8 @@
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/delay.h>
-#include <linux/highmem.h>
 
 #include <linux/kallsyms.h>
-#include <linux/edd.h>
-#include <linux/iscsi_ibft.h>
-#include <linux/kexec.h>
 #include <linux/cpufreq.h>
 #include <linux/dma-mapping.h>
 #include <linux/ctype.h>
@@ -96,7 +92,7 @@
 #include <asm/smp.h>
 #include <asm/desc.h>
 #include <asm/dma.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
 
@@ -104,7 +100,6 @@
 #include <asm/paravirt.h>
 
 #include <asm/percpu.h>
-#include <asm/sections.h>
 #include <asm/topology.h>
 #include <asm/apicdef.h>
 #ifdef CONFIG_X86_64
@@ -579,6 +574,10 @@ static int __init setup_elfcorehdr(char *arg)
 early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
+static struct x86_quirks default_x86_quirks __initdata;
+
+struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -598,11 +597,11 @@ void __init setup_arch(char **cmdline_p)
         memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
         visws_early_detect();
         pre_setup_arch_hook();
-        early_cpu_init();
 #else
         printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
+        early_cpu_init();
         early_ioremap_init();
 
         ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
@@ -666,9 +665,6 @@ void __init setup_arch(char **cmdline_p)
         bss_resource.start = virt_to_phys(&__bss_start);
         bss_resource.end = virt_to_phys(&__bss_stop)-1;
 
-#ifdef CONFIG_X86_64
-        early_cpu_init();
-#endif
         strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
         *cmdline_p = command_line;
 
@@ -681,7 +677,7 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_X86_LOCAL_APIC
                 disable_apic = 1;
 #endif
-                clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+                setup_clear_cpu_cap(X86_FEATURE_APIC);
         }
 
 #ifdef CONFIG_PCI
@@ -824,7 +820,10 @@ void __init setup_arch(char **cmdline_p)
         vmi_init();
 #endif
 
+        paravirt_pagetable_setup_start(swapper_pg_dir);
         paging_init();
+        paravirt_pagetable_setup_done(swapper_pg_dir);
+        paravirt_post_allocator_init();
 
 #ifdef CONFIG_X86_64
         map_vsyscall();
@@ -854,14 +853,6 @@ void __init setup_arch(char **cmdline_p)
         init_cpu_to_node();
 #endif
 
-#ifdef CONFIG_X86_NUMAQ
-        /*
-         * need to check online nodes num, call it
-         * here before time_init/tsc_init
-         */
-        numaq_tsc_disable();
-#endif
-
         init_apic_mappings();
         ioapic_init_mappings();
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index cac68430d31f..f7745f94c006 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -227,8 +227,8 @@ static void __init setup_node_to_cpumask_map(void)
         /* allocate the map */
         map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
 
-        Dprintk(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
-                map, nr_node_ids);
+        pr_debug(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
+                 map, nr_node_ids);
 
         /* node_to_cpumask() will now work */
         node_to_cpumask_map = map;
@@ -248,7 +248,7 @@ void __cpuinit numa_set_node(int cpu, int node)
                 per_cpu(x86_cpu_to_node_map, cpu) = node;
 
         else
-                Dprintk(KERN_INFO "Setting node for non-present cpu %d\n", cpu);
+                pr_debug("Setting node for non-present cpu %d\n", cpu);
 }
 
 void __cpuinit numa_clear_node(int cpu)
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index d92373630963..6fb5bcdd8933 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -212,7 +212,7 @@ asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
 
 badframe:
         if (show_unhandled_signals && printk_ratelimit()) {
-                printk(KERN_INFO "%s%s[%d] bad frame in sigreturn frame:"
+                printk("%s%s[%d] bad frame in sigreturn frame:"
                         "%p ip:%lx sp:%lx oeax:%lx",
                     task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
                     current->comm, task_pid_nr(current), frame, regs->ip,
@@ -657,18 +657,9 @@ static void do_signal(struct pt_regs *regs)
 void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
-        /* Pending single-step? */
-        if (thread_info_flags & _TIF_SINGLESTEP) {
-                regs->flags |= X86_EFLAGS_TF;
-                clear_thread_flag(TIF_SINGLESTEP);
-        }
-
         /* deal with pending signal delivery */
         if (thread_info_flags & _TIF_SIGPENDING)
                 do_signal(regs);
 
-        if (thread_info_flags & _TIF_HRTICK_RESCHED)
-                hrtick_resched();
-
         clear_thread_flag(TIF_IRET);
 }
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index e53b267662e7..b45ef8ddd651 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -53,6 +53,59 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
         return do_sigaltstack(uss, uoss, regs->sp);
 }
 
+/*
+ * Signal frame handlers.
+ */
+
+static inline int save_i387(struct _fpstate __user *buf)
+{
+        struct task_struct *tsk = current;
+        int err = 0;
+
+        BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
+                        sizeof(tsk->thread.xstate->fxsave));
+
+        if ((unsigned long)buf % 16)
+                printk("save_i387: bad fpstate %p\n", buf);
+
+        if (!used_math())
+                return 0;
+        clear_used_math(); /* trigger finit */
+        if (task_thread_info(tsk)->status & TS_USEDFPU) {
+                err = save_i387_checking((struct i387_fxsave_struct __user *)
+                                         buf);
+                if (err)
+                        return err;
+                task_thread_info(tsk)->status &= ~TS_USEDFPU;
+                stts();
+        } else {
+                if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
+                                   sizeof(struct i387_fxsave_struct)))
+                        return -1;
+        }
+        return 1;
+}
+
+/*
+ * This restores directly out of user space. Exceptions are handled.
+ */
+static inline int restore_i387(struct _fpstate __user *buf)
+{
+        struct task_struct *tsk = current;
+        int err;
+
+        if (!used_math()) {
+                err = init_fpu(tsk);
+                if (err)
+                        return err;
+        }
+
+        if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+                clts();
+                task_thread_info(current)->status |= TS_USEDFPU;
+        }
+        return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+}
 
 /*
  * Do a signal return; undo the signal stack.
@@ -487,12 +540,6 @@ static void do_signal(struct pt_regs *regs)
 void do_notify_resume(struct pt_regs *regs, void *unused,
                       __u32 thread_info_flags)
 {
-        /* Pending single-step? */
-        if (thread_info_flags & _TIF_SINGLESTEP) {
-                regs->flags |= X86_EFLAGS_TF;
-                clear_thread_flag(TIF_SINGLESTEP);
-        }
-
 #ifdef CONFIG_X86_MCE
         /* notify userspace of pending MCEs */
         if (thread_info_flags & _TIF_MCE_NOTIFY)
@@ -502,9 +549,6 @@ void do_notify_resume(struct pt_regs *regs, void *unused,
         /* deal with pending signal delivery */
         if (thread_info_flags & _TIF_SIGPENDING)
                 do_signal(regs);
-
-        if (thread_info_flags & _TIF_HRTICK_RESCHED)
-                hrtick_resched();
 }
 
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 687376ab07e8..332512767f4f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -216,7 +216,7 @@ static void __cpuinit smp_callin(void)
                 panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
                                         phys_id, cpuid);
         }
-        Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
+        pr_debug("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
 
         /*
          * STARTUP IPIs are fragile beasts as they might sometimes
@@ -251,7 +251,7 @@ static void __cpuinit smp_callin(void)
          * boards)
          */
 
-        Dprintk("CALLIN, before setup_local_APIC().\n");
+        pr_debug("CALLIN, before setup_local_APIC().\n");
         smp_callin_clear_local_apic();
         setup_local_APIC();
         end_local_APIC_setup();
@@ -266,7 +266,7 @@ static void __cpuinit smp_callin(void)
         local_irq_enable();
         calibrate_delay();
         local_irq_disable();
-        Dprintk("Stack at about %p\n", &cpuid);
+        pr_debug("Stack at about %p\n", &cpuid);
 
         /*
          * Save our processor parameters
@@ -438,7 +438,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
         cpu_set(cpu, cpu_sibling_setup_map);
 
         if (smp_num_siblings > 1) {
-                for_each_cpu_mask(i, cpu_sibling_setup_map) {
+                for_each_cpu_mask_nr(i, cpu_sibling_setup_map) {
                         if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
                             c->cpu_core_id == cpu_data(i).cpu_core_id) {
                                 cpu_set(i, per_cpu(cpu_sibling_map, cpu));
@@ -461,7 +461,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
                 return;
         }
 
-        for_each_cpu_mask(i, cpu_sibling_setup_map) {
+        for_each_cpu_mask_nr(i, cpu_sibling_setup_map) {
                 if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
                     per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
                         cpu_set(i, c->llc_shared_map);
@@ -513,7 +513,7 @@ static void impress_friends(void)
         /*
          * Allow the user to impress friends.
          */
-        Dprintk("Before bogomips.\n");
+        pr_debug("Before bogomips.\n");
         for_each_possible_cpu(cpu)
                 if (cpu_isset(cpu, cpu_callout_map))
                         bogosum += cpu_data(cpu).loops_per_jiffy;
@@ -523,7 +523,7 @@ static void impress_friends(void)
                 bogosum/(500000/HZ),
                 (bogosum/(5000/HZ))%100);
 
-        Dprintk("Before bogocount - setting activated=1.\n");
+        pr_debug("Before bogocount - setting activated=1.\n");
 }
 
 static inline void __inquire_remote_apic(int apicid)
@@ -546,8 +546,8 @@ static inline void __inquire_remote_apic(int apicid)
                         printk(KERN_CONT
                                "a previous APIC delivery may have failed\n");
 
-                apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-                apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
+                apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
+                apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
 
                 timeout = 0;
                 do {
@@ -579,29 +579,24 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
         int maxlvt;
 
         /* Target chip */
-        apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
+        apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
 
         /* Boot on the stack */
         /* Kick the second */
-        apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
+        apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
 
-        Dprintk("Waiting for send to finish...\n");
+        pr_debug("Waiting for send to finish...\n");
         send_status = safe_apic_wait_icr_idle();
 
         /*
          * Give the other CPU some time to accept the IPI.
          */
         udelay(200);
-        /*
-         * Due to the Pentium erratum 3AP.
-         */
         maxlvt = lapic_get_maxlvt();
-        if (maxlvt > 3) {
-                apic_read_around(APIC_SPIV);
+        if (maxlvt > 3)                 /* Due to the Pentium erratum 3AP.  */
                 apic_write(APIC_ESR, 0);
-        }
         accept_status = (apic_read(APIC_ESR) & 0xEF);
-        Dprintk("NMI sent.\n");
+        pr_debug("NMI sent.\n");
 
         if (send_status)
                 printk(KERN_ERR "APIC never delivered???\n");
@@ -625,42 +620,44 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
                 return send_status;
         }
 
+        maxlvt = lapic_get_maxlvt();
+
         /*
          * Be paranoid about clearing APIC errors.
          */
         if (APIC_INTEGRATED(apic_version[phys_apicid])) {
-                apic_read_around(APIC_SPIV);
-                apic_write(APIC_ESR, 0);
+                if (maxlvt > 3)         /* Due to the Pentium erratum 3AP.  */
+                        apic_write(APIC_ESR, 0);
                 apic_read(APIC_ESR);
         }
 
-        Dprintk("Asserting INIT.\n");
+        pr_debug("Asserting INIT.\n");
 
         /*
          * Turn INIT on target chip
          */
-        apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+        apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
         /*
          * Send IPI
          */
-        apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
-                                | APIC_DM_INIT);
+        apic_write(APIC_ICR,
+                   APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
 
-        Dprintk("Waiting for send to finish...\n");
+        pr_debug("Waiting for send to finish...\n");
         send_status = safe_apic_wait_icr_idle();
 
         mdelay(10);
 
-        Dprintk("Deasserting INIT.\n");
+        pr_debug("Deasserting INIT.\n");
 
         /* Target chip */
-        apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+        apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
         /* Send IPI */
-        apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+        apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
 
-        Dprintk("Waiting for send to finish...\n");
+        pr_debug("Waiting for send to finish...\n");
         send_status = safe_apic_wait_icr_idle();
 
         mb();
@@ -687,55 +684,47 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
         /*
          * Run STARTUP IPI loop.
          */
-        Dprintk("#startup loops: %d.\n", num_starts);
-
-        maxlvt = lapic_get_maxlvt();
+        pr_debug("#startup loops: %d.\n", num_starts);
 
         for (j = 1; j <= num_starts; j++) {
-                Dprintk("Sending STARTUP #%d.\n", j);
-                apic_read_around(APIC_SPIV);
-                apic_write(APIC_ESR, 0);
+                pr_debug("Sending STARTUP #%d.\n", j);
+                if (maxlvt > 3)         /* Due to the Pentium erratum 3AP.  */
+                        apic_write(APIC_ESR, 0);
                 apic_read(APIC_ESR);
-                Dprintk("After apic_write.\n");
+                pr_debug("After apic_write.\n");
 
                 /*
                  * STARTUP IPI
                  */
 
                 /* Target chip */
-                apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+                apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
                 /* Boot on the stack */
                 /* Kick the second */
-                apic_write_around(APIC_ICR, APIC_DM_STARTUP
-                                        | (start_eip >> 12));
+                apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12));
 
                 /*
                  * Give the other CPU some time to accept the IPI.
                  */
                 udelay(300);
 
-                Dprintk("Startup point 1.\n");
+                pr_debug("Startup point 1.\n");
 
-                Dprintk("Waiting for send to finish...\n");
+                pr_debug("Waiting for send to finish...\n");
                 send_status = safe_apic_wait_icr_idle();
 
                 /*
                  * Give the other CPU some time to accept the IPI.
                  */
                 udelay(200);
-                /*
-                 * Due to the Pentium erratum 3AP.
-                 */
-                if (maxlvt > 3) {
-                        apic_read_around(APIC_SPIV);
+                if (maxlvt > 3)         /* Due to the Pentium erratum 3AP.  */
                         apic_write(APIC_ESR, 0);
-                }
                 accept_status = (apic_read(APIC_ESR) & 0xEF);
                 if (send_status || accept_status)
                         break;
         }
-        Dprintk("After Startup.\n");
+        pr_debug("After Startup.\n");
 
         if (send_status)
                 printk(KERN_ERR "APIC never delivered???\n");
@@ -768,7 +757,7 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
  *
  * Must be called after the _cpu_pda pointer table is initialized.
  */
-static int __cpuinit get_local_pda(int cpu)
+int __cpuinit get_local_pda(int cpu)
 {
         struct x8664_pda *oldpda, *newpda;
         unsigned long size = sizeof(struct x8664_pda);
@@ -886,7 +875,7 @@ do_rest:
 
         if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
 
-                Dprintk("Setting warm reset code and vector.\n");
+                pr_debug("Setting warm reset code and vector.\n");
 
                 store_NMI_vector(&nmi_high, &nmi_low);
 
@@ -907,9 +896,9 @@ do_rest:
                 /*
                  * allow APs to start initializing.
                  */
-                Dprintk("Before Callout %d.\n", cpu);
+                pr_debug("Before Callout %d.\n", cpu);
                 cpu_set(cpu, cpu_callout_map);
-                Dprintk("After Callout %d.\n", cpu);
+                pr_debug("After Callout %d.\n", cpu);
 
                 /*
                  * Wait 5s total for a response
@@ -922,10 +911,10 @@ do_rest:
 
                 if (cpu_isset(cpu, cpu_callin_map)) {
                         /* number CPUs logically, starting from 1 (BSP is 0) */
-                        Dprintk("OK.\n");
+                        pr_debug("OK.\n");
                         printk(KERN_INFO "CPU%d: ", cpu);
                         print_cpu_info(&cpu_data(cpu));
-                        Dprintk("CPU has booted.\n");
+                        pr_debug("CPU has booted.\n");
                 } else {
                         boot_error = 1;
                         if (*((volatile unsigned char *)trampoline_base)
@@ -970,7 +959,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 
         WARN_ON(irqs_disabled());
 
-        Dprintk("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
+        pr_debug("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
 
         if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
             !physid_isset(apicid, phys_cpu_present_map)) {
@@ -982,7 +971,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
          * Already booted CPU?
          */
         if (cpu_isset(cpu, cpu_callin_map)) {
-                Dprintk("do_boot_cpu %d Already started\n", cpu);
+                pr_debug("do_boot_cpu %d Already started\n", cpu);
                 return -ENOSYS;
         }
 
@@ -1009,7 +998,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
         err = do_boot_cpu(apicid, cpu);
 #endif
         if (err) {
-                Dprintk("do_boot_cpu failed %d\n", err);
+                pr_debug("do_boot_cpu failed %d\n", err);
                 return -EIO;
         }
 
@@ -1213,7 +1202,7 @@ void __init native_smp_prepare_boot_cpu(void)
 
 void __init native_smp_cpus_done(unsigned int max_cpus)
 {
-        Dprintk("Boot done.\n");
+        pr_debug("Boot done.\n");
 
         impress_friends();
         smp_checks();
@@ -1230,7 +1219,7 @@ static void remove_siblinginfo(int cpu)
         int sibling;
         struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-        for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
+        for_each_cpu_mask_nr(sibling, per_cpu(cpu_core_map, cpu)) {
                 cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
                 /*/
                  * last thread sibling in this cpu core going down
@@ -1239,7 +1228,7 @@ static void remove_siblinginfo(int cpu)
                         cpu_data(sibling).booted_cores--;
         }
 
-        for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
+        for_each_cpu_mask_nr(sibling, per_cpu(cpu_sibling_map, cpu))
                 cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
         cpus_clear(per_cpu(cpu_sibling_map, cpu));
         cpus_clear(per_cpu(cpu_core_map, cpu));
@@ -1311,7 +1300,7 @@ static void __ref remove_cpu_from_maps(int cpu)
         cpu_clear(cpu, cpu_callout_map);
         cpu_clear(cpu, cpu_callin_map);
         /* was set by cpu_init() */
-        clear_bit(cpu, (unsigned long *)&cpu_initialized);
+        cpu_clear(cpu, cpu_initialized);
         numa_remove_cpu(cpu);
 }
 
@@ -1390,7 +1379,8 @@ static int __init parse_maxcpus(char *arg)
 {
         extern unsigned int maxcpus;
 
-        maxcpus = simple_strtoul(arg, NULL, 0);
+        if (arg)
+                maxcpus = simple_strtoul(arg, NULL, 0);
         return 0;
 }
 early_param("maxcpus", parse_maxcpus);
diff --git a/arch/x86/kernel/smpcommon_32.c b/arch/x86/kernel/smpcommon_32.c
deleted file mode 100644
index 8b137891791f..000000000000
--- a/arch/x86/kernel/smpcommon_32.c
+++ /dev/null
@@ -1 +0,0 @@
-
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 92c20fee6781..e8b9863ef8c4 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -105,6 +105,20 @@ static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs)
 static int enable_single_step(struct task_struct *child)
 {
         struct pt_regs *regs = task_pt_regs(child);
+        unsigned long oflags;
+
+        /*
+         * If we stepped into a sysenter/syscall insn, it trapped in
+         * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
+         * If user-mode had set TF itself, then it's still clear from
+         * do_debug() and we need to set it again to restore the user
+         * state so we don't wrongly set TIF_FORCED_TF below.
+         * If enable_single_step() was used last and that is what
+         * set TIF_SINGLESTEP, then both TF and TIF_FORCED_TF are
+         * already set and our bookkeeping is fine.
+         */
+        if (unlikely(test_tsk_thread_flag(child, TIF_SINGLESTEP)))
+                regs->flags |= X86_EFLAGS_TF;
 
         /*
          * Always set TIF_SINGLESTEP - this guarantees that
@@ -113,11 +127,7 @@ static int enable_single_step(struct task_struct *child)
          */
         set_tsk_thread_flag(child, TIF_SINGLESTEP);
 
-        /*
-         * If TF was already set, don't do anything else
-         */
-        if (regs->flags & X86_EFLAGS_TF)
-                return 0;
+        oflags = regs->flags;
 
         /* Set TF on the kernel stack.. */
         regs->flags |= X86_EFLAGS_TF;
@@ -126,9 +136,22 @@ static int enable_single_step(struct task_struct *child)
          * ..but if TF is changed by the instruction we will trace,
          * don't mark it as being "us" that set it, so that we
          * won't clear it by hand later.
+         *
+         * Note that if we don't actually execute the popf because
+         * of a signal arriving right now or suchlike, we will lose
+         * track of the fact that it really was "us" that set it.
          */
-        if (is_setting_trap_flag(child, regs))
+        if (is_setting_trap_flag(child, regs)) {
+                clear_tsk_thread_flag(child, TIF_FORCED_TF);
                 return 0;
+        }
+
+        /*
+         * If TF was already set, check whether it was us who set it.
+         * If not, we should never attempt a block step.
+         */
+        if (oflags & X86_EFLAGS_TF)
+                return test_tsk_thread_flag(child, TIF_FORCED_TF);
 
         set_tsk_thread_flag(child, TIF_FORCED_TF);
 
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index adff5562f5fd..d44395ff34c3 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -326,3 +326,9 @@ ENTRY(sys_call_table)
         .long sys_fallocate
         .long sys_timerfd_settime       /* 325 */
         .long sys_timerfd_gettime
+        .long sys_signalfd4
+        .long sys_eventfd2
+        .long sys_epoll_create1
+        .long sys_dup3                  /* 330 */
+        .long sys_pipe2
+        .long sys_inotify_init1
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 059ca6ee59b4..ffe3c664afc0 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -129,6 +129,7 @@ void __init hpet_time_init(void)
  */
 void __init time_init(void)
 {
+        pre_time_init_hook();
         tsc_init();
         late_time_init = choose_time_init();
 }
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index 8a768973c4f0..03df8e45e5a1 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -58,6 +58,7 @@
 #include <asm/nmi.h>
 #include <asm/smp.h>
 #include <asm/io.h>
+#include <asm/traps.h>
 
 #include "mach_traps.h"
 
@@ -77,26 +78,6 @@ char ignore_fpu_irq;
 gate_desc idt_table[256]
         __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
 
-asmlinkage void divide_error(void);
-asmlinkage void debug(void);
-asmlinkage void nmi(void);
-asmlinkage void int3(void);
-asmlinkage void overflow(void);
-asmlinkage void bounds(void);
-asmlinkage void invalid_op(void);
-asmlinkage void device_not_available(void);
-asmlinkage void coprocessor_segment_overrun(void);
-asmlinkage void invalid_TSS(void);
-asmlinkage void segment_not_present(void);
-asmlinkage void stack_segment(void);
-asmlinkage void general_protection(void);
-asmlinkage void page_fault(void);
-asmlinkage void coprocessor_error(void);
-asmlinkage void simd_coprocessor_error(void);
-asmlinkage void alignment_check(void);
-asmlinkage void spurious_interrupt_bug(void);
-asmlinkage void machine_check(void);
-
 int panic_on_unrecovered_nmi;
 int kstack_depth_to_print = 24;
 static unsigned int code_bytes = 64;
@@ -256,7 +237,7 @@ static const struct stacktrace_ops print_trace_ops = {
 
 static void
 show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-                   unsigned long *stack, unsigned long bp, char *log_lvl)
+                unsigned long *stack, unsigned long bp, char *log_lvl)
 {
         dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
         printk("%s =======================\n", log_lvl);
@@ -383,6 +364,54 @@ int is_valid_bugaddr(unsigned long ip)
         return ud2 == 0x0b0f;
 }
 
+static raw_spinlock_t die_lock = __RAW_SPIN_LOCK_UNLOCKED;
+static int die_owner = -1;
+static unsigned int die_nest_count;
+
+unsigned __kprobes long oops_begin(void)
+{
+        unsigned long flags;
+
+        oops_enter();
+
+        if (die_owner != raw_smp_processor_id()) {
+                console_verbose();
+                raw_local_irq_save(flags);
+                __raw_spin_lock(&die_lock);
+                die_owner = smp_processor_id();
+                die_nest_count = 0;
+                bust_spinlocks(1);
+        } else {
+                raw_local_irq_save(flags);
+        }
+        die_nest_count++;
+        return flags;
+}
+
+void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
+{
+        bust_spinlocks(0);
+        die_owner = -1;
+        add_taint(TAINT_DIE);
+        __raw_spin_unlock(&die_lock);
+        raw_local_irq_restore(flags);
+
+        if (!regs)
+                return;
+
+        if (kexec_should_crash(current))
+                crash_kexec(regs);
+
+        if (in_interrupt())
+                panic("Fatal exception in interrupt");
+
+        if (panic_on_oops)
+                panic("Fatal exception");
+
+        oops_exit();
+        do_exit(signr);
+}
+
 int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 {
         unsigned short ss;
@@ -423,31 +452,9 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
  */
 void die(const char *str, struct pt_regs *regs, long err)
 {
-        static struct {
-                raw_spinlock_t lock;
-                u32 lock_owner;
-                int lock_owner_depth;
-        } die = {
-                .lock =                 __RAW_SPIN_LOCK_UNLOCKED,
-                .lock_owner =           -1,
-                .lock_owner_depth =     0
-        };
-        unsigned long flags;
-
-        oops_enter();
-
-        if (die.lock_owner != raw_smp_processor_id()) {
-                console_verbose();
-                raw_local_irq_save(flags);
-                __raw_spin_lock(&die.lock);
-                die.lock_owner = smp_processor_id();
-                die.lock_owner_depth = 0;
-                bust_spinlocks(1);
-        } else {
-                raw_local_irq_save(flags);
-        }
+        unsigned long flags = oops_begin();
 
-        if (++die.lock_owner_depth < 3) {
+        if (die_nest_count < 3) {
                 report_bug(regs->ip, regs);
 
                 if (__die(str, regs, err))
@@ -456,26 +463,7 @@ void die(const char *str, struct pt_regs *regs, long err)
                 printk(KERN_EMERG "Recursive die() failure, output suppressed\n");
         }
 
-        bust_spinlocks(0);
-        die.lock_owner = -1;
-        add_taint(TAINT_DIE);
-        __raw_spin_unlock(&die.lock);
-        raw_local_irq_restore(flags);
-
-        if (!regs)
-                return;
-
-        if (kexec_should_crash(current))
-                crash_kexec(regs);
-
-        if (in_interrupt())
-                panic("Fatal exception in interrupt");
-
-        if (panic_on_oops)
-                panic("Fatal exception");
-
-        oops_exit();
-        do_exit(SIGSEGV);
+        oops_end(flags, regs, SIGSEGV);
 }
 
 static inline void
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index 2696a6837782..3f18d73f420c 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -51,30 +51,10 @@
 #include <asm/pgalloc.h>
 #include <asm/proto.h>
 #include <asm/pda.h>
+#include <asm/traps.h>
 
 #include <mach_traps.h>
 
-asmlinkage void divide_error(void);
-asmlinkage void debug(void);
-asmlinkage void nmi(void);
-asmlinkage void int3(void);
-asmlinkage void overflow(void);
-asmlinkage void bounds(void);
-asmlinkage void invalid_op(void);
-asmlinkage void device_not_available(void);
-asmlinkage void double_fault(void);
-asmlinkage void coprocessor_segment_overrun(void);
-asmlinkage void invalid_TSS(void);
-asmlinkage void segment_not_present(void);
-asmlinkage void stack_segment(void);
-asmlinkage void general_protection(void);
-asmlinkage void page_fault(void);
-asmlinkage void coprocessor_error(void);
-asmlinkage void simd_coprocessor_error(void);
-asmlinkage void alignment_check(void);
-asmlinkage void spurious_interrupt_bug(void);
-asmlinkage void machine_check(void);
-
 int panic_on_unrecovered_nmi;
 int kstack_depth_to_print = 12;
 static unsigned int code_bytes = 64;
@@ -355,17 +335,24 @@ static const struct stacktrace_ops print_trace_ops = {
         .address = print_trace_address,
 };
 
-void show_trace(struct task_struct *task, struct pt_regs *regs,
-                unsigned long *stack, unsigned long bp)
+static void
+show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
+                unsigned long *stack, unsigned long bp, char *log_lvl)
 {
         printk("\nCall Trace:\n");
-        dump_trace(task, regs, stack, bp, &print_trace_ops, NULL);
+        dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
         printk("\n");
 }
 
+void show_trace(struct task_struct *task, struct pt_regs *regs,
+                unsigned long *stack, unsigned long bp)
+{
+        show_trace_log_lvl(task, regs, stack, bp, "");
+}
+
 static void
-_show_stack(struct task_struct *task, struct pt_regs *regs,
-                unsigned long *sp, unsigned long bp)
+show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+                unsigned long *sp, unsigned long bp, char *log_lvl)
 {
         unsigned long *stack;
         int i;
@@ -399,12 +386,12 @@ _show_stack(struct task_struct *task, struct pt_regs *regs,
                 printk(" %016lx", *stack++);
                 touch_nmi_watchdog();
         }
-        show_trace(task, regs, sp, bp);
+        show_trace_log_lvl(task, regs, sp, bp, log_lvl);
 }
 
 void show_stack(struct task_struct *task, unsigned long *sp)
 {
-        _show_stack(task, NULL, sp, 0);
+        show_stack_log_lvl(task, NULL, sp, 0, "");
 }
 
 /*
@@ -454,7 +441,8 @@ void show_registers(struct pt_regs *regs)
                 u8 *ip;
 
                 printk("Stack: ");
-                _show_stack(NULL, regs, (unsigned long *)sp, regs->bp);
+                show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
+                                regs->bp, "");
                 printk("\n");
 
                 printk(KERN_EMERG "Code: ");
@@ -518,7 +506,7 @@ unsigned __kprobes long oops_begin(void)
 }
 
 void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
-{ 
+{
         die_owner = -1;
         bust_spinlocks(0);
         die_nest_count--;
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index e94bdb6add1d..41e01b145c48 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -73,7 +73,7 @@ int is_visws_box(void)
         return visws_board_type >= 0;
 }
 
-static int __init visws_time_init_quirk(void)
+static int __init visws_time_init(void)
 {
         printk(KERN_INFO "Starting Cobalt Timer system clock\n");
 
@@ -93,7 +93,7 @@ static int __init visws_time_init_quirk(void)
         return 0;
 }
 
-static int __init visws_pre_intr_init_quirk(void)
+static int __init visws_pre_intr_init(void)
 {
         init_VISWS_APIC_irqs();
 
@@ -114,7 +114,7 @@ EXPORT_SYMBOL(sgivwfb_mem_size);
 
 long long mem_size __initdata = 0;
 
-static char * __init visws_memory_setup_quirk(void)
+static char * __init visws_memory_setup(void)
 {
         long long gfx_mem_size = 8 * MB;
 
@@ -176,7 +176,7 @@ static void visws_machine_power_off(void)
         outl(PIIX_SPECIAL_STOP, 0xCFC);
 }
 
-static int __init visws_get_smp_config_quirk(unsigned int early)
+static int __init visws_get_smp_config(unsigned int early)
 {
         /*
          * Prevent MP-table parsing by the generic code:
@@ -192,7 +192,7 @@ extern unsigned int __cpuinitdata maxcpus;
  * No problem for Linux.
  */
 
-static void __init MP_processor_info (struct mpc_config_processor *m)
+static void __init MP_processor_info(struct mpc_config_processor *m)
 {
         int ver, logical_apicid;
         physid_mask_t apic_cpus;
@@ -232,7 +232,7 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
         apic_version[m->mpc_apicid] = ver;
 }
 
-int __init visws_find_smp_config_quirk(unsigned int reserve)
+static int __init visws_find_smp_config(unsigned int reserve)
 {
         struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
         unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
@@ -258,7 +258,17 @@ int __init visws_find_smp_config_quirk(unsigned int reserve)
         return 1;
 }
 
-extern int visws_trap_init_quirk(void);
+static int visws_trap_init(void);
+
+static struct x86_quirks visws_x86_quirks __initdata = {
+        .arch_time_init         = visws_time_init,
+        .arch_pre_intr_init     = visws_pre_intr_init,
+        .arch_memory_setup      = visws_memory_setup,
+        .arch_intr_init         = NULL,
+        .arch_trap_init         = visws_trap_init,
+        .mach_get_smp_config    = visws_get_smp_config,
+        .mach_find_smp_config   = visws_find_smp_config,
+};
 
 void __init visws_early_detect(void)
 {
@@ -272,16 +282,10 @@ void __init visws_early_detect(void)
 
         /*
          * Install special quirks for timer, interrupt and memory setup:
-         */
-        arch_time_init_quirk            = visws_time_init_quirk;
-        arch_pre_intr_init_quirk        = visws_pre_intr_init_quirk;
-        arch_memory_setup_quirk         = visws_memory_setup_quirk;
-
-        /*
          * Fall back to generic behavior for traps:
+         * Override generic MP-table parsing:
          */
-        arch_intr_init_quirk            = NULL;
-        arch_trap_init_quirk            = visws_trap_init_quirk;
+        x86_quirks = &visws_x86_quirks;
 
         /*
          * Install reboot quirks:
@@ -294,12 +298,6 @@ void __init visws_early_detect(void)
          */
         no_broadcast = 0;
 
-        /*
-         * Override generic MP-table parsing:
-         */
-        mach_get_smp_config_quirk       = visws_get_smp_config_quirk;
-        mach_find_smp_config_quirk      = visws_find_smp_config_quirk;
-
 #ifdef CONFIG_X86_IO_APIC
         /*
          * Turn off IO-APIC detection and initialization:
@@ -426,7 +424,7 @@ static __init void cobalt_init(void)
                 co_apic_read(CO_APIC_ID));
 }
 
-int __init visws_trap_init_quirk(void)
+static int __init visws_trap_init(void)
 {
         lithium_init();
         cobalt_init();
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index b15346092b7b..0a1b1a9d922d 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -906,7 +906,6 @@ static inline int __init activate_vmi(void)
 #ifdef CONFIG_X86_LOCAL_APIC
         para_fill(pv_apic_ops.apic_read, APICRead);
         para_fill(pv_apic_ops.apic_write, APICWrite);
-        para_fill(pv_apic_ops.apic_write_atomic, APICWrite);
 #endif
 
         /*
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index c97d35c218db..d0e940bb6f40 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -2,7 +2,8 @@
 # Makefile for Kernel-based Virtual Machine module
 #
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+                coalesced_mmio.o)
 ifeq ($(CONFIG_KVM_TRACE),y)
 common-objs += $(addprefix ../../../virt/kvm/, kvm_trace.o)
 endif
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 3829aa7b663f..c0f7872a9124 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -91,7 +91,7 @@ static void pit_set_gate(struct kvm *kvm, int channel, u32 val)
         c->gate = val;
 }
 
-int pit_get_gate(struct kvm *kvm, int channel)
+static int pit_get_gate(struct kvm *kvm, int channel)
 {
         WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
 
@@ -193,19 +193,16 @@ static void pit_latch_status(struct kvm *kvm, int channel)
         }
 }
 
-int __pit_timer_fn(struct kvm_kpit_state *ps)
+static int __pit_timer_fn(struct kvm_kpit_state *ps)
 {
         struct kvm_vcpu *vcpu0 = ps->pit->kvm->vcpus[0];
         struct kvm_kpit_timer *pt = &ps->pit_timer;
 
-        atomic_inc(&pt->pending);
-        smp_mb__after_atomic_inc();
-        if (vcpu0) {
+        if (!atomic_inc_and_test(&pt->pending))
                 set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
-                if (waitqueue_active(&vcpu0->wq)) {
-                        vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
-                        wake_up_interruptible(&vcpu0->wq);
-                }
+        if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
+                vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+                wake_up_interruptible(&vcpu0->wq);
         }
 
         pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
@@ -308,6 +305,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
                 create_pit_timer(&ps->pit_timer, val, 0);
                 break;
         case 2:
+        case 3:
                 create_pit_timer(&ps->pit_timer, val, 1);
                 break;
         default:
@@ -459,7 +457,8 @@ static void pit_ioport_read(struct kvm_io_device *this,
         mutex_unlock(&pit_state->lock);
 }
 
-static int pit_in_range(struct kvm_io_device *this, gpa_t addr)
+static int pit_in_range(struct kvm_io_device *this, gpa_t addr,
+                        int len, int is_write)
 {
         return ((addr >= KVM_PIT_BASE_ADDRESS) &&
                 (addr < KVM_PIT_BASE_ADDRESS + KVM_PIT_MEM_LENGTH));
@@ -500,7 +499,8 @@ static void speaker_ioport_read(struct kvm_io_device *this,
         mutex_unlock(&pit_state->lock);
 }
 
-static int speaker_in_range(struct kvm_io_device *this, gpa_t addr)
+static int speaker_in_range(struct kvm_io_device *this, gpa_t addr,
+                            int len, int is_write)
 {
         return (addr == KVM_SPEAKER_BASE_ADDRESS);
 }
@@ -575,7 +575,7 @@ void kvm_free_pit(struct kvm *kvm)
         }
 }
 
-void __inject_pit_timer_intr(struct kvm *kvm)
+static void __inject_pit_timer_intr(struct kvm *kvm)
 {
         mutex_lock(&kvm->lock);
         kvm_ioapic_set_irq(kvm->arch.vioapic, 0, 1);
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index ab29cf2def47..c31164e8aa46 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -130,8 +130,10 @@ void kvm_pic_set_irq(void *opaque, int irq, int level)
 {
         struct kvm_pic *s = opaque;
 
-        pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
-        pic_update_irq(s);
+        if (irq >= 0 && irq < PIC_NUM_PINS) {
+                pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
+                pic_update_irq(s);
+        }
 }
 
 /*
@@ -346,7 +348,8 @@ static u32 elcr_ioport_read(void *opaque, u32 addr1)
         return s->elcr;
 }
 
-static int picdev_in_range(struct kvm_io_device *this, gpa_t addr)
+static int picdev_in_range(struct kvm_io_device *this, gpa_t addr,
+                           int len, int is_write)
 {
         switch (addr) {
         case 0x20:
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 2a15be2275c0..7ca47cbb48bb 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -30,6 +30,8 @@
 #include "ioapic.h"
 #include "lapic.h"
 
+#define PIC_NUM_PINS 16
+
 struct kvm;
 struct kvm_vcpu;
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ebc03f5ae162..73f43de69f67 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -356,8 +356,9 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
         case APIC_DM_SMI:
                 printk(KERN_DEBUG "Ignoring guest SMI\n");
                 break;
+
         case APIC_DM_NMI:
-                printk(KERN_DEBUG "Ignoring guest NMI\n");
+                kvm_inject_nmi(vcpu);
                 break;
 
         case APIC_DM_INIT:
@@ -572,6 +573,8 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 {
         u32 val = 0;
 
+        KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
+
         if (offset >= LAPIC_MMIO_LENGTH)
                 return 0;
 
@@ -695,6 +698,8 @@ static void apic_mmio_write(struct kvm_io_device *this,
 
         offset &= 0xff0;
 
+        KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
+
         switch (offset) {
         case APIC_ID:           /* Local APIC ID */
                 apic_set_reg(apic, APIC_ID, val);
@@ -780,7 +785,8 @@ static void apic_mmio_write(struct kvm_io_device *this,
 
 }
 
-static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr)
+static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr,
+                           int len, int size)
 {
         struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
         int ret = 0;
@@ -939,8 +945,8 @@ static int __apic_timer_fn(struct kvm_lapic *apic)
         int result = 0;
         wait_queue_head_t *q = &apic->vcpu->wq;
 
-        atomic_inc(&apic->timer.pending);
-        set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
+        if(!atomic_inc_and_test(&apic->timer.pending))
+                set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
         if (waitqueue_active(q)) {
                 apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
                 wake_up_interruptible(q);
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 676c396c9cee..81858881287e 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -31,6 +31,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu);
 u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
 void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
 void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value);
+u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 7e7c3969f7a2..2fa231923cf7 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -66,7 +66,8 @@ static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg) {}
 #endif
 
 #if defined(MMU_DEBUG) || defined(AUDIT)
-static int dbg = 1;
+static int dbg = 0;
+module_param(dbg, bool, 0644);
 #endif
 
 #ifndef MMU_DEBUG
@@ -776,6 +777,15 @@ static void mmu_page_remove_parent_pte(struct kvm_mmu_page *sp,
         BUG();
 }
 
+static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
+                                    struct kvm_mmu_page *sp)
+{
+        int i;
+
+        for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
+                sp->spt[i] = shadow_trap_nonpresent_pte;
+}
+
 static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm *kvm, gfn_t gfn)
 {
         unsigned index;
@@ -841,7 +851,10 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
         hlist_add_head(&sp->hash_link, bucket);
         if (!metaphysical)
                 rmap_write_protect(vcpu->kvm, gfn);
-        vcpu->arch.mmu.prefetch_page(vcpu, sp);
+        if (shadow_trap_nonpresent_pte != shadow_notrap_nonpresent_pte)
+                vcpu->arch.mmu.prefetch_page(vcpu, sp);
+        else
+                nonpaging_prefetch_page(vcpu, sp);
         return sp;
 }
 
@@ -917,14 +930,17 @@ static void kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
         }
         kvm_mmu_page_unlink_children(kvm, sp);
         if (!sp->root_count) {
-                if (!sp->role.metaphysical)
+                if (!sp->role.metaphysical && !sp->role.invalid)
                         unaccount_shadowed(kvm, sp->gfn);
                 hlist_del(&sp->hash_link);
                 kvm_mmu_free_page(kvm, sp);
         } else {
+                int invalid = sp->role.invalid;
                 list_move(&sp->link, &kvm->arch.active_mmu_pages);
                 sp->role.invalid = 1;
                 kvm_reload_remote_mmus(kvm);
+                if (!sp->role.metaphysical && !invalid)
+                        unaccount_shadowed(kvm, sp->gfn);
         }
         kvm_mmu_reset_last_pte_updated(kvm);
 }
@@ -1103,7 +1119,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
                 mark_page_dirty(vcpu->kvm, gfn);
 
         pgprintk("%s: setting spte %llx\n", __func__, spte);
-        pgprintk("instantiating %s PTE (%s) at %d (%llx) addr %llx\n",
+        pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
                  (spte&PT_PAGE_SIZE_MASK)? "2MB" : "4kB",
                  (spte&PT_WRITABLE_MASK)?"RW":"R", gfn, spte, shadow_pte);
         set_shadow_pte(shadow_pte, spte);
@@ -1122,8 +1138,10 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
                 else
                         kvm_release_pfn_clean(pfn);
         }
-        if (!ptwrite || !*ptwrite)
+        if (speculative) {
                 vcpu->arch.last_pte_updated = shadow_pte;
+                vcpu->arch.last_pte_gfn = gfn;
+        }
 }
 
 static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
@@ -1171,9 +1189,10 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
                                 return -ENOMEM;
                         }
 
-                        table[index] = __pa(new_table->spt)
-                                | PT_PRESENT_MASK | PT_WRITABLE_MASK
-                                | shadow_user_mask | shadow_x_mask;
+                        set_shadow_pte(&table[index],
+                                       __pa(new_table->spt)
+                                       | PT_PRESENT_MASK | PT_WRITABLE_MASK
+                                       | shadow_user_mask | shadow_x_mask);
                 }
                 table_addr = table[index] & PT64_BASE_ADDR_MASK;
         }
@@ -1211,15 +1230,6 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 }
 
 
-static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
-                                    struct kvm_mmu_page *sp)
-{
-        int i;
-
-        for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
-                sp->spt[i] = shadow_trap_nonpresent_pte;
-}
-
 static void mmu_free_roots(struct kvm_vcpu *vcpu)
 {
         int i;
@@ -1671,6 +1681,18 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
         vcpu->arch.update_pte.pfn = pfn;
 }
 
+static void kvm_mmu_access_page(struct kvm_vcpu *vcpu, gfn_t gfn)
+{
+        u64 *spte = vcpu->arch.last_pte_updated;
+
+        if (spte
+            && vcpu->arch.last_pte_gfn == gfn
+            && shadow_accessed_mask
+            && !(*spte & shadow_accessed_mask)
+            && is_shadow_present_pte(*spte))
+                set_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte);
+}
+
 void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
                        const u8 *new, int bytes)
 {
@@ -1694,6 +1716,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
         pgprintk("%s: gpa %llx bytes %d\n", __func__, gpa, bytes);
         mmu_guess_page_from_pte_write(vcpu, gpa, new, bytes);
         spin_lock(&vcpu->kvm->mmu_lock);
+        kvm_mmu_access_page(vcpu, gfn);
         kvm_mmu_free_some_pages(vcpu);
         ++vcpu->kvm->stat.mmu_pte_write;
         kvm_mmu_audit(vcpu, "pre pte write");
@@ -1791,6 +1814,7 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
         spin_unlock(&vcpu->kvm->mmu_lock);
         return r;
 }
+EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);
 
 void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
@@ -1847,6 +1871,12 @@ void kvm_enable_tdp(void)
 }
 EXPORT_SYMBOL_GPL(kvm_enable_tdp);
 
+void kvm_disable_tdp(void)
+{
+        tdp_enabled = false;
+}
+EXPORT_SYMBOL_GPL(kvm_disable_tdp);
+
 static void free_mmu_pages(struct kvm_vcpu *vcpu)
 {
         struct kvm_mmu_page *sp;
@@ -1948,7 +1978,7 @@ void kvm_mmu_zap_all(struct kvm *kvm)
         kvm_flush_remote_tlbs(kvm);
 }
 
-void kvm_mmu_remove_one_alloc_mmu_page(struct kvm *kvm)
+static void kvm_mmu_remove_one_alloc_mmu_page(struct kvm *kvm)
 {
         struct kvm_mmu_page *page;
 
@@ -1968,6 +1998,8 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
         list_for_each_entry(kvm, &vm_list, vm_list) {
                 int npages;
 
+                if (!down_read_trylock(&kvm->slots_lock))
+                        continue;
                 spin_lock(&kvm->mmu_lock);
                 npages = kvm->arch.n_alloc_mmu_pages -
                          kvm->arch.n_free_mmu_pages;
@@ -1980,6 +2012,7 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
                 nr_to_scan--;
 
                 spin_unlock(&kvm->mmu_lock);
+                up_read(&kvm->slots_lock);
         }
         if (kvm_freed)
                 list_move_tail(&kvm_freed->vm_list, &vm_list);
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 1730757bbc7a..258e5d56298e 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -15,7 +15,8 @@
 #define PT_USER_MASK (1ULL << 2)
 #define PT_PWT_MASK (1ULL << 3)
 #define PT_PCD_MASK (1ULL << 4)
-#define PT_ACCESSED_MASK (1ULL << 5)
+#define PT_ACCESSED_SHIFT 5
+#define PT_ACCESSED_MASK (1ULL << PT_ACCESSED_SHIFT)
 #define PT_DIRTY_MASK (1ULL << 6)
 #define PT_PAGE_SIZE_MASK (1ULL << 7)
 #define PT_PAT_MASK (1ULL << 7)
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 934c7b619396..4d918220baeb 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -460,8 +460,9 @@ static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
 static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
                                  struct kvm_mmu_page *sp)
 {
-        int i, offset = 0, r = 0;
-        pt_element_t pt;
+        int i, j, offset, r;
+        pt_element_t pt[256 / sizeof(pt_element_t)];
+        gpa_t pte_gpa;
 
         if (sp->role.metaphysical
             || (PTTYPE == 32 && sp->role.level > PT_PAGE_TABLE_LEVEL)) {
@@ -469,19 +470,20 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
                 return;
         }
 
-        if (PTTYPE == 32)
+        pte_gpa = gfn_to_gpa(sp->gfn);
+        if (PTTYPE == 32) {
                 offset = sp->role.quadrant << PT64_LEVEL_BITS;
+                pte_gpa += offset * sizeof(pt_element_t);
+        }
 
-        for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
-                gpa_t pte_gpa = gfn_to_gpa(sp->gfn);
-                pte_gpa += (i+offset) * sizeof(pt_element_t);
-
-                r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &pt,
-                                          sizeof(pt_element_t));
-                if (r || is_present_pte(pt))
-                        sp->spt[i] = shadow_trap_nonpresent_pte;
-                else
-                        sp->spt[i] = shadow_notrap_nonpresent_pte;
+        for (i = 0; i < PT64_ENT_PER_PAGE; i += ARRAY_SIZE(pt)) {
+                r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, pt, sizeof pt);
+                pte_gpa += ARRAY_SIZE(pt) * sizeof(pt_element_t);
+                for (j = 0; j < ARRAY_SIZE(pt); ++j)
+                        if (r || is_present_pte(pt[j]))
+                                sp->spt[i+j] = shadow_trap_nonpresent_pte;
+                        else
+                                sp->spt[i+j] = shadow_notrap_nonpresent_pte;
         }
 }
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 6b0d5fa5bab3..e2ee264740c7 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -27,6 +27,8 @@
 
 #include <asm/desc.h>
 
+#define __ex(x) __kvm_handle_fault_on_reboot(x)
+
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
@@ -129,17 +131,17 @@ static inline void push_irq(struct kvm_vcpu *vcpu, u8 irq)
 
 static inline void clgi(void)
 {
-        asm volatile (SVM_CLGI);
+        asm volatile (__ex(SVM_CLGI));
 }
 
 static inline void stgi(void)
 {
-        asm volatile (SVM_STGI);
+        asm volatile (__ex(SVM_STGI));
 }
 
 static inline void invlpga(unsigned long addr, u32 asid)
 {
-        asm volatile (SVM_INVLPGA :: "a"(addr), "c"(asid));
+        asm volatile (__ex(SVM_INVLPGA) :: "a"(addr), "c"(asid));
 }
 
 static inline unsigned long kvm_read_cr2(void)
@@ -270,19 +272,11 @@ static int has_svm(void)
 
 static void svm_hardware_disable(void *garbage)
 {
-        struct svm_cpu_data *svm_data
-                = per_cpu(svm_data, raw_smp_processor_id());
-
-        if (svm_data) {
-                uint64_t efer;
+        uint64_t efer;
 
-                wrmsrl(MSR_VM_HSAVE_PA, 0);
-                rdmsrl(MSR_EFER, efer);
-                wrmsrl(MSR_EFER, efer & ~MSR_EFER_SVME_MASK);
-                per_cpu(svm_data, raw_smp_processor_id()) = NULL;
-                __free_page(svm_data->save_area);
-                kfree(svm_data);
-        }
+        wrmsrl(MSR_VM_HSAVE_PA, 0);
+        rdmsrl(MSR_EFER, efer);
+        wrmsrl(MSR_EFER, efer & ~MSR_EFER_SVME_MASK);
 }
 
 static void svm_hardware_enable(void *garbage)
@@ -321,6 +315,19 @@ static void svm_hardware_enable(void *garbage)
                page_to_pfn(svm_data->save_area) << PAGE_SHIFT);
 }
 
+static void svm_cpu_uninit(int cpu)
+{
+        struct svm_cpu_data *svm_data
+                = per_cpu(svm_data, raw_smp_processor_id());
+
+        if (!svm_data)
+                return;
+
+        per_cpu(svm_data, raw_smp_processor_id()) = NULL;
+        __free_page(svm_data->save_area);
+        kfree(svm_data);
+}
+
 static int svm_cpu_init(int cpu)
 {
         struct svm_cpu_data *svm_data;
@@ -446,7 +453,8 @@ static __init int svm_hardware_setup(void)
         if (npt_enabled) {
                 printk(KERN_INFO "kvm: Nested Paging enabled\n");
                 kvm_enable_tdp();
-        }
+        } else
+                kvm_disable_tdp();
 
         return 0;
 
@@ -458,6 +466,11 @@ err:
 
 static __exit void svm_hardware_unsetup(void)
 {
+        int cpu;
+
+        for_each_online_cpu(cpu)
+                svm_cpu_uninit(cpu);
+
         __free_pages(pfn_to_page(iopm_base >> PAGE_SHIFT), IOPM_ALLOC_ORDER);
         iopm_base = 0;
 }
@@ -707,10 +720,6 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu)
         rdtscll(vcpu->arch.host_tsc);
 }
 
-static void svm_vcpu_decache(struct kvm_vcpu *vcpu)
-{
-}
-
 static void svm_cache_regs(struct kvm_vcpu *vcpu)
 {
         struct vcpu_svm *svm = to_svm(vcpu);
@@ -949,7 +958,9 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *svm_data)
 
 static unsigned long svm_get_dr(struct kvm_vcpu *vcpu, int dr)
 {
-        return to_svm(vcpu)->db_regs[dr];
+        unsigned long val = to_svm(vcpu)->db_regs[dr];
+        KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
+        return val;
 }
 
 static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
@@ -997,13 +1008,28 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
         struct kvm *kvm = svm->vcpu.kvm;
         u64 fault_address;
         u32 error_code;
+        bool event_injection = false;
 
         if (!irqchip_in_kernel(kvm) &&
-                is_external_interrupt(exit_int_info))
+            is_external_interrupt(exit_int_info)) {
+                event_injection = true;
                 push_irq(&svm->vcpu, exit_int_info & SVM_EVTINJ_VEC_MASK);
+        }
 
         fault_address  = svm->vmcb->control.exit_info_2;
         error_code = svm->vmcb->control.exit_info_1;
+
+        if (!npt_enabled)
+                KVMTRACE_3D(PAGE_FAULT, &svm->vcpu, error_code,
+                            (u32)fault_address, (u32)(fault_address >> 32),
+                            handler);
+        else
+                KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
+                            (u32)fault_address, (u32)(fault_address >> 32),
+                            handler);
+
+        if (event_injection)
+                kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
         return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
@@ -1081,6 +1107,19 @@ static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
         return kvm_emulate_pio(&svm->vcpu, kvm_run, in, size, port);
 }
 
+static int nmi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+        KVMTRACE_0D(NMI, &svm->vcpu, handler);
+        return 1;
+}
+
+static int intr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+        ++svm->vcpu.stat.irq_exits;
+        KVMTRACE_0D(INTR, &svm->vcpu, handler);
+        return 1;
+}
+
 static int nop_on_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
         return 1;
@@ -1219,6 +1258,9 @@ static int rdmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
         if (svm_get_msr(&svm->vcpu, ecx, &data))
                 kvm_inject_gp(&svm->vcpu, 0);
         else {
+                KVMTRACE_3D(MSR_READ, &svm->vcpu, ecx, (u32)data,
+                            (u32)(data >> 32), handler);
+
                 svm->vmcb->save.rax = data & 0xffffffff;
                 svm->vcpu.arch.regs[VCPU_REGS_RDX] = data >> 32;
                 svm->next_rip = svm->vmcb->save.rip + 2;
@@ -1284,16 +1326,19 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
         case MSR_K7_EVNTSEL1:
         case MSR_K7_EVNTSEL2:
         case MSR_K7_EVNTSEL3:
+        case MSR_K7_PERFCTR0:
+        case MSR_K7_PERFCTR1:
+        case MSR_K7_PERFCTR2:
+        case MSR_K7_PERFCTR3:
                 /*
-                 * only support writing 0 to the performance counters for now
-                 * to make Windows happy. Should be replaced by a real
-                 * performance counter emulation later.
+                 * Just discard all writes to the performance counters; this
+                 * should keep both older linux and windows 64-bit guests
+                 * happy
                  */
-                if (data != 0)
-                        goto unhandled;
+                pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", ecx, data);
+
                 break;
         default:
-        unhandled:
                 return kvm_set_msr_common(vcpu, ecx, data);
         }
         return 0;
@@ -1304,6 +1349,10 @@ static int wrmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
         u32 ecx = svm->vcpu.arch.regs[VCPU_REGS_RCX];
         u64 data = (svm->vmcb->save.rax & -1u)
                 | ((u64)(svm->vcpu.arch.regs[VCPU_REGS_RDX] & -1u) << 32);
+
+        KVMTRACE_3D(MSR_WRITE, &svm->vcpu, ecx, (u32)data, (u32)(data >> 32),
+                    handler);
+
         svm->next_rip = svm->vmcb->save.rip + 2;
         if (svm_set_msr(&svm->vcpu, ecx, data))
                 kvm_inject_gp(&svm->vcpu, 0);
@@ -1323,6 +1372,8 @@ static int msr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 static int interrupt_window_interception(struct vcpu_svm *svm,
                                    struct kvm_run *kvm_run)
 {
+        KVMTRACE_0D(PEND_INTR, &svm->vcpu, handler);
+
         svm->vmcb->control.intercept &= ~(1ULL << INTERCEPT_VINTR);
         svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
         /*
@@ -1364,8 +1415,8 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
         [SVM_EXIT_EXCP_BASE + PF_VECTOR]        = pf_interception,
         [SVM_EXIT_EXCP_BASE + NM_VECTOR]        = nm_interception,
         [SVM_EXIT_EXCP_BASE + MC_VECTOR]        = mc_interception,
-        [SVM_EXIT_INTR]                         = nop_on_interception,
-        [SVM_EXIT_NMI]                          = nop_on_interception,
+        [SVM_EXIT_INTR]                         = intr_interception,
+        [SVM_EXIT_NMI]                          = nmi_interception,
         [SVM_EXIT_SMI]                          = nop_on_interception,
         [SVM_EXIT_INIT]                         = nop_on_interception,
         [SVM_EXIT_VINTR]                        = interrupt_window_interception,
@@ -1397,6 +1448,9 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
         struct vcpu_svm *svm = to_svm(vcpu);
         u32 exit_code = svm->vmcb->control.exit_code;
 
+        KVMTRACE_3D(VMEXIT, vcpu, exit_code, (u32)svm->vmcb->save.rip,
+                    (u32)((u64)svm->vmcb->save.rip >> 32), entryexit);
+
         if (npt_enabled) {
                 int mmu_reload = 0;
                 if ((vcpu->arch.cr0 ^ svm->vmcb->save.cr0) & X86_CR0_PG) {
@@ -1470,6 +1524,8 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 {
         struct vmcb_control_area *control;
 
+        KVMTRACE_1D(INJ_VIRQ, &svm->vcpu, (u32)irq, handler);
+
         control = &svm->vmcb->control;
         control->int_vector = irq;
         control->int_ctl &= ~V_INTR_PRIO_MASK;
@@ -1660,9 +1716,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
         sync_lapic_to_cr8(vcpu);
 
         save_host_msrs(vcpu);
-        fs_selector = read_fs();
-        gs_selector = read_gs();
-        ldt_selector = read_ldt();
+        fs_selector = kvm_read_fs();
+        gs_selector = kvm_read_gs();
+        ldt_selector = kvm_read_ldt();
         svm->host_cr2 = kvm_read_cr2();
         svm->host_dr6 = read_dr6();
         svm->host_dr7 = read_dr7();
@@ -1716,17 +1772,17 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
                 /* Enter guest mode */
                 "push %%rax \n\t"
                 "mov %c[vmcb](%[svm]), %%rax \n\t"
-                SVM_VMLOAD "\n\t"
-                SVM_VMRUN "\n\t"
-                SVM_VMSAVE "\n\t"
+                __ex(SVM_VMLOAD) "\n\t"
+                __ex(SVM_VMRUN) "\n\t"
+                __ex(SVM_VMSAVE) "\n\t"
                 "pop %%rax \n\t"
 #else
                 /* Enter guest mode */
                 "push %%eax \n\t"
                 "mov %c[vmcb](%[svm]), %%eax \n\t"
-                SVM_VMLOAD "\n\t"
-                SVM_VMRUN "\n\t"
-                SVM_VMSAVE "\n\t"
+                __ex(SVM_VMLOAD) "\n\t"
+                __ex(SVM_VMRUN) "\n\t"
+                __ex(SVM_VMSAVE) "\n\t"
                 "pop %%eax \n\t"
 #endif
 
@@ -1795,9 +1851,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
         write_dr7(svm->host_dr7);
         kvm_write_cr2(svm->host_cr2);
 
-        load_fs(fs_selector);
-        load_gs(gs_selector);
-        load_ldt(ldt_selector);
+        kvm_load_fs(fs_selector);
+        kvm_load_gs(gs_selector);
+        kvm_load_ldt(ldt_selector);
         load_host_msrs(vcpu);
 
         reload_tss(vcpu);
@@ -1889,7 +1945,6 @@ static struct kvm_x86_ops svm_x86_ops = {
         .prepare_guest_switch = svm_prepare_guest_switch,
         .vcpu_load = svm_vcpu_load,
         .vcpu_put = svm_vcpu_put,
-        .vcpu_decache = svm_vcpu_decache,
 
         .set_guest_debug = svm_guest_debug,
         .get_msr = svm_get_msr,
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 10ce6ee4c491..2a69773e3b26 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -30,6 +30,8 @@
 #include <asm/io.h>
 #include <asm/desc.h>
 
+#define __ex(x) __kvm_handle_fault_on_reboot(x)
+
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
@@ -53,6 +55,7 @@ struct vmcs {
 
 struct vcpu_vmx {
         struct kvm_vcpu       vcpu;
+        struct list_head      local_vcpus_link;
         int                   launched;
         u8                    fail;
         u32                   idt_vectoring_info;
@@ -88,9 +91,11 @@ static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu)
 }
 
 static int init_rmode(struct kvm *kvm);
+static u64 construct_eptp(unsigned long root_hpa);
 
 static DEFINE_PER_CPU(struct vmcs *, vmxarea);
 static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
+static DEFINE_PER_CPU(struct list_head, vcpus_on_cpu);
 
 static struct page *vmx_io_bitmap_a;
 static struct page *vmx_io_bitmap_b;
@@ -260,6 +265,11 @@ static inline int cpu_has_vmx_vpid(void)
                 SECONDARY_EXEC_ENABLE_VPID);
 }
 
+static inline int cpu_has_virtual_nmis(void)
+{
+        return vmcs_config.pin_based_exec_ctrl & PIN_BASED_VIRTUAL_NMIS;
+}
+
 static int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
 {
         int i;
@@ -278,7 +288,7 @@ static inline void __invvpid(int ext, u16 vpid, gva_t gva)
         u64 gva;
     } operand = { vpid, 0, gva };
 
-    asm volatile (ASM_VMX_INVVPID
+    asm volatile (__ex(ASM_VMX_INVVPID)
                   /* CF==1 or ZF==1 --> rc = -1 */
                   "; ja 1f ; ud2 ; 1:"
                   : : "a"(&operand), "c"(ext) : "cc", "memory");
@@ -290,7 +300,7 @@ static inline void __invept(int ext, u64 eptp, gpa_t gpa)
                 u64 eptp, gpa;
         } operand = {eptp, gpa};
 
-        asm volatile (ASM_VMX_INVEPT
+        asm volatile (__ex(ASM_VMX_INVEPT)
                         /* CF==1 or ZF==1 --> rc = -1 */
                         "; ja 1f ; ud2 ; 1:\n"
                         : : "a" (&operand), "c" (ext) : "cc", "memory");
@@ -311,7 +321,7 @@ static void vmcs_clear(struct vmcs *vmcs)
         u64 phys_addr = __pa(vmcs);
         u8 error;
 
-        asm volatile (ASM_VMX_VMCLEAR_RAX "; setna %0"
+        asm volatile (__ex(ASM_VMX_VMCLEAR_RAX) "; setna %0"
                       : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
                       : "cc", "memory");
         if (error)
@@ -329,6 +339,9 @@ static void __vcpu_clear(void *arg)
         if (per_cpu(current_vmcs, cpu) == vmx->vmcs)
                 per_cpu(current_vmcs, cpu) = NULL;
         rdtscll(vmx->vcpu.arch.host_tsc);
+        list_del(&vmx->local_vcpus_link);
+        vmx->vcpu.cpu = -1;
+        vmx->launched = 0;
 }
 
 static void vcpu_clear(struct vcpu_vmx *vmx)
@@ -336,7 +349,6 @@ static void vcpu_clear(struct vcpu_vmx *vmx)
         if (vmx->vcpu.cpu == -1)
                 return;
         smp_call_function_single(vmx->vcpu.cpu, __vcpu_clear, vmx, 1);
-        vmx->launched = 0;
 }
 
 static inline void vpid_sync_vcpu_all(struct vcpu_vmx *vmx)
@@ -378,7 +390,7 @@ static unsigned long vmcs_readl(unsigned long field)
 {
         unsigned long value;
 
-        asm volatile (ASM_VMX_VMREAD_RDX_RAX
+        asm volatile (__ex(ASM_VMX_VMREAD_RDX_RAX)
                       : "=a"(value) : "d"(field) : "cc");
         return value;
 }
@@ -413,7 +425,7 @@ static void vmcs_writel(unsigned long field, unsigned long value)
 {
         u8 error;
 
-        asm volatile (ASM_VMX_VMWRITE_RAX_RDX "; setna %0"
+        asm volatile (__ex(ASM_VMX_VMWRITE_RAX_RDX) "; setna %0"
                        : "=q"(error) : "a"(value), "d"(field) : "cc");
         if (unlikely(error))
                 vmwrite_error(field, value);
@@ -431,10 +443,8 @@ static void vmcs_write32(unsigned long field, u32 value)
 
 static void vmcs_write64(unsigned long field, u64 value)
 {
-#ifdef CONFIG_X86_64
-        vmcs_writel(field, value);
-#else
         vmcs_writel(field, value);
+#ifndef CONFIG_X86_64
         asm volatile ("");
         vmcs_writel(field+1, value >> 32);
 #endif
@@ -474,7 +484,7 @@ static void reload_tss(void)
         struct descriptor_table gdt;
         struct desc_struct *descs;
 
-        get_gdt(&gdt);
+        kvm_get_gdt(&gdt);
         descs = (void *)gdt.base;
         descs[GDT_ENTRY_TSS].type = 9; /* available TSS */
         load_TR_desc();
@@ -530,9 +540,9 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
          * Set host fs and gs selectors.  Unfortunately, 22.2.3 does not
          * allow segment selectors with cpl > 0 or ti == 1.
          */
-        vmx->host_state.ldt_sel = read_ldt();
+        vmx->host_state.ldt_sel = kvm_read_ldt();
         vmx->host_state.gs_ldt_reload_needed = vmx->host_state.ldt_sel;
-        vmx->host_state.fs_sel = read_fs();
+        vmx->host_state.fs_sel = kvm_read_fs();
         if (!(vmx->host_state.fs_sel & 7)) {
                 vmcs_write16(HOST_FS_SELECTOR, vmx->host_state.fs_sel);
                 vmx->host_state.fs_reload_needed = 0;
@@ -540,7 +550,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
                 vmcs_write16(HOST_FS_SELECTOR, 0);
                 vmx->host_state.fs_reload_needed = 1;
         }
-        vmx->host_state.gs_sel = read_gs();
+        vmx->host_state.gs_sel = kvm_read_gs();
         if (!(vmx->host_state.gs_sel & 7))
                 vmcs_write16(HOST_GS_SELECTOR, vmx->host_state.gs_sel);
         else {
@@ -576,15 +586,15 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
         ++vmx->vcpu.stat.host_state_reload;
         vmx->host_state.loaded = 0;
         if (vmx->host_state.fs_reload_needed)
-                load_fs(vmx->host_state.fs_sel);
+                kvm_load_fs(vmx->host_state.fs_sel);
         if (vmx->host_state.gs_ldt_reload_needed) {
-                load_ldt(vmx->host_state.ldt_sel);
+                kvm_load_ldt(vmx->host_state.ldt_sel);
                 /*
                  * If we have to reload gs, we must take care to
                  * preserve our gs base.
                  */
                 local_irq_save(flags);
-                load_gs(vmx->host_state.gs_sel);
+                kvm_load_gs(vmx->host_state.gs_sel);
 #ifdef CONFIG_X86_64
                 wrmsrl(MSR_GS_BASE, vmcs_readl(HOST_GS_BASE));
 #endif
@@ -617,13 +627,17 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
                 vcpu_clear(vmx);
                 kvm_migrate_timers(vcpu);
                 vpid_sync_vcpu_all(vmx);
+                local_irq_disable();
+                list_add(&vmx->local_vcpus_link,
+                         &per_cpu(vcpus_on_cpu, cpu));
+                local_irq_enable();
         }
 
         if (per_cpu(current_vmcs, cpu) != vmx->vmcs) {
                 u8 error;
 
                 per_cpu(current_vmcs, cpu) = vmx->vmcs;
-                asm volatile (ASM_VMX_VMPTRLD_RAX "; setna %0"
+                asm volatile (__ex(ASM_VMX_VMPTRLD_RAX) "; setna %0"
                               : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
                               : "cc");
                 if (error)
@@ -640,8 +654,8 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
                  * Linux uses per-cpu TSS and GDT, so set these when switching
                  * processors.
                  */
-                vmcs_writel(HOST_TR_BASE, read_tr_base()); /* 22.2.4 */
-                get_gdt(&dt);
+                vmcs_writel(HOST_TR_BASE, kvm_read_tr_base()); /* 22.2.4 */
+                kvm_get_gdt(&dt);
                 vmcs_writel(HOST_GDTR_BASE, dt.base);   /* 22.2.4 */
 
                 rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp);
@@ -684,11 +698,6 @@ static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
         update_exception_bitmap(vcpu);
 }
 
-static void vmx_vcpu_decache(struct kvm_vcpu *vcpu)
-{
-        vcpu_clear(to_vmx(vcpu));
-}
-
 static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 {
         return vmcs_readl(GUEST_RFLAGS);
@@ -913,6 +922,18 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
         case MSR_IA32_TIME_STAMP_COUNTER:
                 guest_write_tsc(data);
                 break;
+        case MSR_P6_PERFCTR0:
+        case MSR_P6_PERFCTR1:
+        case MSR_P6_EVNTSEL0:
+        case MSR_P6_EVNTSEL1:
+                /*
+                 * Just discard all writes to the performance counters; this
+                 * should keep both older linux and windows 64-bit guests
+                 * happy
+                 */
+                pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", msr_index, data);
+
+                break;
         default:
                 vmx_load_host_state(vmx);
                 msr = find_msr_entry(vmx, msr_index);
@@ -1022,6 +1043,7 @@ static void hardware_enable(void *garbage)
         u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
         u64 old;
 
+        INIT_LIST_HEAD(&per_cpu(vcpus_on_cpu, cpu));
         rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
         if ((old & (MSR_IA32_FEATURE_CONTROL_LOCKED |
                     MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED))
@@ -1032,13 +1054,25 @@ static void hardware_enable(void *garbage)
                        MSR_IA32_FEATURE_CONTROL_LOCKED |
                        MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED);
         write_cr4(read_cr4() | X86_CR4_VMXE); /* FIXME: not cpu hotplug safe */
-        asm volatile (ASM_VMX_VMXON_RAX : : "a"(&phys_addr), "m"(phys_addr)
+        asm volatile (ASM_VMX_VMXON_RAX
+                      : : "a"(&phys_addr), "m"(phys_addr)
                       : "memory", "cc");
 }
 
+static void vmclear_local_vcpus(void)
+{
+        int cpu = raw_smp_processor_id();
+        struct vcpu_vmx *vmx, *n;
+
+        list_for_each_entry_safe(vmx, n, &per_cpu(vcpus_on_cpu, cpu),
+                                 local_vcpus_link)
+                __vcpu_clear(vmx);
+}
+
 static void hardware_disable(void *garbage)
 {
-        asm volatile (ASM_VMX_VMXOFF : : : "cc");
+        vmclear_local_vcpus();
+        asm volatile (__ex(ASM_VMX_VMXOFF) : : : "cc");
         write_cr4(read_cr4() & ~X86_CR4_VMXE);
 }
 
@@ -1072,7 +1106,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
         u32 _vmentry_control = 0;
 
         min = PIN_BASED_EXT_INTR_MASK | PIN_BASED_NMI_EXITING;
-        opt = 0;
+        opt = PIN_BASED_VIRTUAL_NMIS;
         if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PINBASED_CTLS,
                                 &_pin_based_exec_control) < 0)
                 return -EIO;
@@ -1389,6 +1423,8 @@ static void exit_lmode(struct kvm_vcpu *vcpu)
 static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
 {
         vpid_sync_vcpu_all(to_vmx(vcpu));
+        if (vm_need_ept())
+                ept_sync_context(construct_eptp(vcpu->arch.mmu.root_hpa));
 }
 
 static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
@@ -1420,7 +1456,7 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
         if (!(cr0 & X86_CR0_PG)) {
                 /* From paging/starting to nonpaging */
                 vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
-                             vmcs_config.cpu_based_exec_ctrl |
+                             vmcs_read32(CPU_BASED_VM_EXEC_CONTROL) |
                              (CPU_BASED_CR3_LOAD_EXITING |
                               CPU_BASED_CR3_STORE_EXITING));
                 vcpu->arch.cr0 = cr0;
@@ -1430,7 +1466,7 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
         } else if (!is_paging(vcpu)) {
                 /* From nonpaging to paging */
                 vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
-                             vmcs_config.cpu_based_exec_ctrl &
+                             vmcs_read32(CPU_BASED_VM_EXEC_CONTROL) &
                              ~(CPU_BASED_CR3_LOAD_EXITING |
                                CPU_BASED_CR3_STORE_EXITING));
                 vcpu->arch.cr0 = cr0;
@@ -1821,7 +1857,7 @@ static void allocate_vpid(struct vcpu_vmx *vmx)
         spin_unlock(&vmx_vpid_lock);
 }
 
-void vmx_disable_intercept_for_msr(struct page *msr_bitmap, u32 msr)
+static void vmx_disable_intercept_for_msr(struct page *msr_bitmap, u32 msr)
 {
         void *va;
 
@@ -1907,8 +1943,8 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
         vmcs_write16(HOST_CS_SELECTOR, __KERNEL_CS);  /* 22.2.4 */
         vmcs_write16(HOST_DS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
         vmcs_write16(HOST_ES_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
-        vmcs_write16(HOST_FS_SELECTOR, read_fs());    /* 22.2.4 */
-        vmcs_write16(HOST_GS_SELECTOR, read_gs());    /* 22.2.4 */
+        vmcs_write16(HOST_FS_SELECTOR, kvm_read_fs());    /* 22.2.4 */
+        vmcs_write16(HOST_GS_SELECTOR, kvm_read_gs());    /* 22.2.4 */
         vmcs_write16(HOST_SS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
 #ifdef CONFIG_X86_64
         rdmsrl(MSR_FS_BASE, a);
@@ -1922,7 +1958,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 
         vmcs_write16(HOST_TR_SELECTOR, GDT_ENTRY_TSS*8);  /* 22.2.4 */
 
-        get_idt(&dt);
+        kvm_get_idt(&dt);
         vmcs_writel(HOST_IDTR_BASE, dt.base);   /* 22.2.4 */
 
         asm("mov $.Lkvm_vmx_return, %0" : "=r"(kvm_vmx_return));
@@ -2114,6 +2150,13 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu, int irq)
                         irq | INTR_TYPE_EXT_INTR | INTR_INFO_VALID_MASK);
 }
 
+static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
+{
+        vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+                        INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK | NMI_VECTOR);
+        vcpu->arch.nmi_pending = 0;
+}
+
 static void kvm_do_inject_irq(struct kvm_vcpu *vcpu)
 {
         int word_index = __ffs(vcpu->arch.irq_summary);
@@ -2255,6 +2298,8 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
                 cr2 = vmcs_readl(EXIT_QUALIFICATION);
                 KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
                             (u32)((u64)cr2 >> 32), handler);
+                if (vect_info & VECTORING_INFO_VALID_MASK)
+                        kvm_mmu_unprotect_page_virt(vcpu, cr2);
                 return kvm_mmu_page_fault(vcpu, cr2, error_code);
         }
 
@@ -2554,8 +2599,6 @@ static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
         exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
         offset = exit_qualification & 0xffful;
 
-        KVMTRACE_1D(APIC_ACCESS, vcpu, (u32)offset, handler);
-
         er = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
 
         if (er !=  EMULATE_DONE) {
@@ -2639,6 +2682,19 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
         return 1;
 }
 
+static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+        u32 cpu_based_vm_exec_control;
+
+        /* clear pending NMI */
+        cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
+        cpu_based_vm_exec_control &= ~CPU_BASED_VIRTUAL_NMI_PENDING;
+        vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
+        ++vcpu->stat.nmi_window_exits;
+
+        return 1;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -2649,6 +2705,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
         [EXIT_REASON_EXCEPTION_NMI]           = handle_exception,
         [EXIT_REASON_EXTERNAL_INTERRUPT]      = handle_external_interrupt,
         [EXIT_REASON_TRIPLE_FAULT]            = handle_triple_fault,
+        [EXIT_REASON_NMI_WINDOW]              = handle_nmi_window,
         [EXIT_REASON_IO_INSTRUCTION]          = handle_io,
         [EXIT_REASON_CR_ACCESS]               = handle_cr,
         [EXIT_REASON_DR_ACCESS]               = handle_dr,
@@ -2736,17 +2793,52 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
         vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
 }
 
+static void enable_nmi_window(struct kvm_vcpu *vcpu)
+{
+        u32 cpu_based_vm_exec_control;
+
+        if (!cpu_has_virtual_nmis())
+                return;
+
+        cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
+        cpu_based_vm_exec_control |= CPU_BASED_VIRTUAL_NMI_PENDING;
+        vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
+}
+
+static int vmx_nmi_enabled(struct kvm_vcpu *vcpu)
+{
+        u32 guest_intr = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+        return !(guest_intr & (GUEST_INTR_STATE_NMI |
+                               GUEST_INTR_STATE_MOV_SS |
+                               GUEST_INTR_STATE_STI));
+}
+
+static int vmx_irq_enabled(struct kvm_vcpu *vcpu)
+{
+        u32 guest_intr = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+        return (!(guest_intr & (GUEST_INTR_STATE_MOV_SS |
+                               GUEST_INTR_STATE_STI)) &&
+                (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF));
+}
+
+static void enable_intr_window(struct kvm_vcpu *vcpu)
+{
+        if (vcpu->arch.nmi_pending)
+                enable_nmi_window(vcpu);
+        else if (kvm_cpu_has_interrupt(vcpu))
+                enable_irq_window(vcpu);
+}
+
 static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 {
         struct vcpu_vmx *vmx = to_vmx(vcpu);
-        u32 idtv_info_field, intr_info_field;
-        int has_ext_irq, interrupt_window_open;
+        u32 idtv_info_field, intr_info_field, exit_intr_info_field;
         int vector;
 
         update_tpr_threshold(vcpu);
 
-        has_ext_irq = kvm_cpu_has_interrupt(vcpu);
         intr_info_field = vmcs_read32(VM_ENTRY_INTR_INFO_FIELD);
+        exit_intr_info_field = vmcs_read32(VM_EXIT_INTR_INFO);
         idtv_info_field = vmx->idt_vectoring_info;
         if (intr_info_field & INTR_INFO_VALID_MASK) {
                 if (idtv_info_field & INTR_INFO_VALID_MASK) {
@@ -2754,8 +2846,7 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
                         if (printk_ratelimit())
                                 printk(KERN_ERR "Fault when IDT_Vectoring\n");
                 }
-                if (has_ext_irq)
-                        enable_irq_window(vcpu);
+                enable_intr_window(vcpu);
                 return;
         }
         if (unlikely(idtv_info_field & INTR_INFO_VALID_MASK)) {
@@ -2765,30 +2856,56 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
                         u8 vect = idtv_info_field & VECTORING_INFO_VECTOR_MASK;
 
                         vmx_inject_irq(vcpu, vect);
-                        if (unlikely(has_ext_irq))
-                                enable_irq_window(vcpu);
+                        enable_intr_window(vcpu);
                         return;
                 }
 
                 KVMTRACE_1D(REDELIVER_EVT, vcpu, idtv_info_field, handler);
 
-                vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, idtv_info_field);
+                /*
+                 * SDM 3: 25.7.1.2
+                 * Clear bit "block by NMI" before VM entry if a NMI delivery
+                 * faulted.
+                 */
+                if ((idtv_info_field & VECTORING_INFO_TYPE_MASK)
+                    == INTR_TYPE_NMI_INTR && cpu_has_virtual_nmis())
+                        vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
+                                vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+                                ~GUEST_INTR_STATE_NMI);
+
+                vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, idtv_info_field
+                                & ~INTR_INFO_RESVD_BITS_MASK);
                 vmcs_write32(VM_ENTRY_INSTRUCTION_LEN,
                                 vmcs_read32(VM_EXIT_INSTRUCTION_LEN));
 
                 if (unlikely(idtv_info_field & INTR_INFO_DELIVER_CODE_MASK))
                         vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE,
                                 vmcs_read32(IDT_VECTORING_ERROR_CODE));
-                if (unlikely(has_ext_irq))
-                        enable_irq_window(vcpu);
+                enable_intr_window(vcpu);
                 return;
         }
-        if (!has_ext_irq)
+        if (cpu_has_virtual_nmis()) {
+                /*
+                 * SDM 3: 25.7.1.2
+                 * Re-set bit "block by NMI" before VM entry if vmexit caused by
+                 * a guest IRET fault.
+                 */
+                if ((exit_intr_info_field & INTR_INFO_UNBLOCK_NMI) &&
+                    (exit_intr_info_field & INTR_INFO_VECTOR_MASK) != 8)
+                        vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
+                                vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) |
+                                GUEST_INTR_STATE_NMI);
+                else if (vcpu->arch.nmi_pending) {
+                        if (vmx_nmi_enabled(vcpu))
+                                vmx_inject_nmi(vcpu);
+                        enable_intr_window(vcpu);
+                        return;
+                }
+
+        }
+        if (!kvm_cpu_has_interrupt(vcpu))
                 return;
-        interrupt_window_open =
-                ((vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
-                 (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0);
-        if (interrupt_window_open) {
+        if (vmx_irq_enabled(vcpu)) {
                 vector = kvm_cpu_get_interrupt(vcpu);
                 vmx_inject_irq(vcpu, vector);
                 kvm_timer_intr_post(vcpu, vector);
@@ -2838,7 +2955,7 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
                 "push %%edx; push %%ebp;"
                 "push %%ecx \n\t"
 #endif
-                ASM_VMX_VMWRITE_RSP_RDX "\n\t"
+                __ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
                 /* Check if vmlaunch of vmresume is needed */
                 "cmpl $0, %c[launched](%0) \n\t"
                 /* Load guest registers.  Don't clobber flags. */
@@ -2873,9 +2990,9 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 #endif
                 /* Enter guest mode */
                 "jne .Llaunched \n\t"
-                ASM_VMX_VMLAUNCH "\n\t"
+                __ex(ASM_VMX_VMLAUNCH) "\n\t"
                 "jmp .Lkvm_vmx_return \n\t"
-                ".Llaunched: " ASM_VMX_VMRESUME "\n\t"
+                ".Llaunched: " __ex(ASM_VMX_VMRESUME) "\n\t"
                 ".Lkvm_vmx_return: "
                 /* Save guest registers, load host registers, keep flags */
 #ifdef CONFIG_X86_64
@@ -2949,7 +3066,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
                 fixup_rmode_irq(vmx);
 
         vcpu->arch.interrupt_window_open =
-                (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0;
+                (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+                 (GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS)) == 0;
 
         asm("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
         vmx->launched = 1;
@@ -2957,7 +3075,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
         intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
 
         /* We need to handle NMIs before interrupts are enabled */
-        if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == 0x200) { /* nmi */
+        if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == 0x200 &&
+            (intr_info & INTR_INFO_VALID_MASK)) {
                 KVMTRACE_0D(NMI, vcpu, handler);
                 asm("int $2");
         }
@@ -2968,7 +3087,7 @@ static void vmx_free_vmcs(struct kvm_vcpu *vcpu)
         struct vcpu_vmx *vmx = to_vmx(vcpu);
 
         if (vmx->vmcs) {
-                on_each_cpu(__vcpu_clear, vmx, 1);
+                vcpu_clear(vmx);
                 free_vmcs(vmx->vmcs);
                 vmx->vmcs = NULL;
         }
@@ -2999,15 +3118,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
                 return ERR_PTR(-ENOMEM);
 
         allocate_vpid(vmx);
-        if (id == 0 && vm_need_ept()) {
-                kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
-                        VMX_EPT_WRITABLE_MASK |
-                        VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
-                kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
-                                VMX_EPT_FAKE_DIRTY_MASK, 0ull,
-                                VMX_EPT_EXECUTABLE_MASK);
-                kvm_enable_tdp();
-        }
 
         err = kvm_vcpu_init(&vmx->vcpu, kvm, id);
         if (err)
@@ -3095,7 +3205,6 @@ static struct kvm_x86_ops vmx_x86_ops = {
         .prepare_guest_switch = vmx_save_host_state,
         .vcpu_load = vmx_vcpu_load,
         .vcpu_put = vmx_vcpu_put,
-        .vcpu_decache = vmx_vcpu_decache,
 
         .set_guest_debug = set_guest_debug,
         .guest_debug_pre = kvm_guest_debug_pre,
@@ -3187,8 +3296,17 @@ static int __init vmx_init(void)
         vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP);
         vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP);
 
-        if (cpu_has_vmx_ept())
+        if (vm_need_ept()) {
                 bypass_guest_pf = 0;
+                kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
+                        VMX_EPT_WRITABLE_MASK |
+                        VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
+                kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
+                                VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+                                VMX_EPT_EXECUTABLE_MASK);
+                kvm_enable_tdp();
+        } else
+                kvm_disable_tdp();
 
         if (bypass_guest_pf)
                 kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull);
diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h
index 79d94c610dfe..425a13436b3f 100644
--- a/arch/x86/kvm/vmx.h
+++ b/arch/x86/kvm/vmx.h
@@ -40,6 +40,7 @@
 #define CPU_BASED_CR8_LOAD_EXITING              0x00080000
 #define CPU_BASED_CR8_STORE_EXITING             0x00100000
 #define CPU_BASED_TPR_SHADOW                    0x00200000
+#define CPU_BASED_VIRTUAL_NMI_PENDING           0x00400000
 #define CPU_BASED_MOV_DR_EXITING                0x00800000
 #define CPU_BASED_UNCOND_IO_EXITING             0x01000000
 #define CPU_BASED_USE_IO_BITMAPS                0x02000000
@@ -216,7 +217,7 @@ enum vmcs_field {
 #define EXIT_REASON_TRIPLE_FAULT        2
 
 #define EXIT_REASON_PENDING_INTERRUPT   7
-
+#define EXIT_REASON_NMI_WINDOW          8
 #define EXIT_REASON_TASK_SWITCH         9
 #define EXIT_REASON_CPUID               10
 #define EXIT_REASON_HLT                 12
@@ -251,7 +252,9 @@ enum vmcs_field {
 #define INTR_INFO_VECTOR_MASK           0xff            /* 7:0 */
 #define INTR_INFO_INTR_TYPE_MASK        0x700           /* 10:8 */
 #define INTR_INFO_DELIVER_CODE_MASK     0x800           /* 11 */
+#define INTR_INFO_UNBLOCK_NMI           0x1000          /* 12 */
 #define INTR_INFO_VALID_MASK            0x80000000      /* 31 */
+#define INTR_INFO_RESVD_BITS_MASK       0x7ffff000
 
 #define VECTORING_INFO_VECTOR_MASK              INTR_INFO_VECTOR_MASK
 #define VECTORING_INFO_TYPE_MASK                INTR_INFO_INTR_TYPE_MASK
@@ -259,9 +262,16 @@ enum vmcs_field {
 #define VECTORING_INFO_VALID_MASK               INTR_INFO_VALID_MASK
 
 #define INTR_TYPE_EXT_INTR              (0 << 8) /* external interrupt */
+#define INTR_TYPE_NMI_INTR              (2 << 8) /* NMI */
 #define INTR_TYPE_EXCEPTION             (3 << 8) /* processor exception */
 #define INTR_TYPE_SOFT_INTR             (4 << 8) /* software interrupt */
 
+/* GUEST_INTERRUPTIBILITY_INFO flags. */
+#define GUEST_INTR_STATE_STI            0x00000001
+#define GUEST_INTR_STATE_MOV_SS         0x00000002
+#define GUEST_INTR_STATE_SMI            0x00000004
+#define GUEST_INTR_STATE_NMI            0x00000008
+
 /*
  * Exit Qualifications for MOV for Control Register Access
  */
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0faa2546b1cd..5916191420c7 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -72,6 +72,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
         { "mmio_exits", VCPU_STAT(mmio_exits) },
         { "signal_exits", VCPU_STAT(signal_exits) },
         { "irq_window", VCPU_STAT(irq_window_exits) },
+        { "nmi_window", VCPU_STAT(nmi_window_exits) },
         { "halt_exits", VCPU_STAT(halt_exits) },
         { "halt_wakeup", VCPU_STAT(halt_wakeup) },
         { "hypercalls", VCPU_STAT(hypercalls) },
@@ -173,6 +174,12 @@ void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long addr,
         kvm_queue_exception_e(vcpu, PF_VECTOR, error_code);
 }
 
+void kvm_inject_nmi(struct kvm_vcpu *vcpu)
+{
+        vcpu->arch.nmi_pending = 1;
+}
+EXPORT_SYMBOL_GPL(kvm_inject_nmi);
+
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code)
 {
         WARN_ON(vcpu->arch.exception.pending);
@@ -604,6 +611,38 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
         mark_page_dirty(v->kvm, vcpu->time >> PAGE_SHIFT);
 }
 
+static bool msr_mtrr_valid(unsigned msr)
+{
+        switch (msr) {
+        case 0x200 ... 0x200 + 2 * KVM_NR_VAR_MTRR - 1:
+        case MSR_MTRRfix64K_00000:
+        case MSR_MTRRfix16K_80000:
+        case MSR_MTRRfix16K_A0000:
+        case MSR_MTRRfix4K_C0000:
+        case MSR_MTRRfix4K_C8000:
+        case MSR_MTRRfix4K_D0000:
+        case MSR_MTRRfix4K_D8000:
+        case MSR_MTRRfix4K_E0000:
+        case MSR_MTRRfix4K_E8000:
+        case MSR_MTRRfix4K_F0000:
+        case MSR_MTRRfix4K_F8000:
+        case MSR_MTRRdefType:
+        case MSR_IA32_CR_PAT:
+                return true;
+        case 0x2f8:
+                return true;
+        }
+        return false;
+}
+
+static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+        if (!msr_mtrr_valid(msr))
+                return 1;
+
+        vcpu->arch.mtrr[msr - 0x200] = data;
+        return 0;
+}
 
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
@@ -625,8 +664,9 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
                 break;
         case MSR_IA32_UCODE_REV:
         case MSR_IA32_UCODE_WRITE:
-        case 0x200 ... 0x2ff: /* MTRRs */
                 break;
+        case 0x200 ... 0x2ff:
+                return set_msr_mtrr(vcpu, msr, data);
         case MSR_IA32_APICBASE:
                 kvm_set_apic_base(vcpu, data);
                 break;
@@ -684,6 +724,15 @@ int kvm_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
         return kvm_x86_ops->get_msr(vcpu, msr_index, pdata);
 }
 
+static int get_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+{
+        if (!msr_mtrr_valid(msr))
+                return 1;
+
+        *pdata = vcpu->arch.mtrr[msr - 0x200];
+        return 0;
+}
+
 int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 {
         u64 data;
@@ -705,11 +754,13 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
         case MSR_IA32_MC0_MISC+16:
         case MSR_IA32_UCODE_REV:
         case MSR_IA32_EBL_CR_POWERON:
-                /* MTRR registers */
-        case 0xfe:
-        case 0x200 ... 0x2ff:
                 data = 0;
                 break;
+        case MSR_MTRRcap:
+                data = 0x500 | KVM_NR_VAR_MTRR;
+                break;
+        case 0x200 ... 0x2ff:
+                return get_msr_mtrr(vcpu, msr, pdata);
         case 0xcd: /* fsb frequency */
                 data = 3;
                 break;
@@ -817,41 +868,6 @@ out:
         return r;
 }
 
-/*
- * Make sure that a cpu that is being hot-unplugged does not have any vcpus
- * cached on it.
- */
-void decache_vcpus_on_cpu(int cpu)
-{
-        struct kvm *vm;
-        struct kvm_vcpu *vcpu;
-        int i;
-
-        spin_lock(&kvm_lock);
-        list_for_each_entry(vm, &vm_list, vm_list)
-                for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-                        vcpu = vm->vcpus[i];
-                        if (!vcpu)
-                                continue;
-                        /*
-                         * If the vcpu is locked, then it is running on some
-                         * other cpu and therefore it is not cached on the
-                         * cpu in question.
-                         *
-                         * If it's not locked, check the last cpu it executed
-                         * on.
-                         */
-                        if (mutex_trylock(&vcpu->mutex)) {
-                                if (vcpu->cpu == cpu) {
-                                        kvm_x86_ops->vcpu_decache(vcpu);
-                                        vcpu->cpu = -1;
-                                }
-                                mutex_unlock(&vcpu->mutex);
-                        }
-                }
-        spin_unlock(&kvm_lock);
-}
-
 int kvm_dev_ioctl_check_extension(long ext)
 {
         int r;
@@ -869,6 +885,9 @@ int kvm_dev_ioctl_check_extension(long ext)
         case KVM_CAP_MP_STATE:
                 r = 1;
                 break;
+        case KVM_CAP_COALESCED_MMIO:
+                r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+                break;
         case KVM_CAP_VAPIC:
                 r = !kvm_x86_ops->cpu_has_accelerated_tpr();
                 break;
@@ -1781,13 +1800,14 @@ static void kvm_init_msr_list(void)
  * Only apic need an MMIO device hook, so shortcut now..
  */
 static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
-                                                gpa_t addr)
+                                                gpa_t addr, int len,
+                                                int is_write)
 {
         struct kvm_io_device *dev;
 
         if (vcpu->arch.apic) {
                 dev = &vcpu->arch.apic->dev;
-                if (dev->in_range(dev, addr))
+                if (dev->in_range(dev, addr, len, is_write))
                         return dev;
         }
         return NULL;
@@ -1795,13 +1815,15 @@ static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
 
 
 static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-                                                gpa_t addr)
+                                                gpa_t addr, int len,
+                                                int is_write)
 {
         struct kvm_io_device *dev;
 
-        dev = vcpu_find_pervcpu_dev(vcpu, addr);
+        dev = vcpu_find_pervcpu_dev(vcpu, addr, len, is_write);
         if (dev == NULL)
-                dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr);
+                dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len,
+                                          is_write);
         return dev;
 }
 
@@ -1869,7 +1891,7 @@ mmio:
          * Is this MMIO handled locally?
          */
         mutex_lock(&vcpu->kvm->lock);
-        mmio_dev = vcpu_find_mmio_dev(vcpu, gpa);
+        mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 0);
         if (mmio_dev) {
                 kvm_iodevice_read(mmio_dev, gpa, bytes, val);
                 mutex_unlock(&vcpu->kvm->lock);
@@ -1924,7 +1946,7 @@ mmio:
          * Is this MMIO handled locally?
          */
         mutex_lock(&vcpu->kvm->lock);
-        mmio_dev = vcpu_find_mmio_dev(vcpu, gpa);
+        mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 1);
         if (mmio_dev) {
                 kvm_iodevice_write(mmio_dev, gpa, bytes, val);
                 mutex_unlock(&vcpu->kvm->lock);
@@ -2020,6 +2042,7 @@ int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
 
 int emulate_clts(struct kvm_vcpu *vcpu)
 {
+        KVMTRACE_0D(CLTS, vcpu, handler);
         kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 & ~X86_CR0_TS);
         return X86EMUL_CONTINUE;
 }
@@ -2053,21 +2076,19 @@ int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr, unsigned long value)
 
 void kvm_report_emulation_failure(struct kvm_vcpu *vcpu, const char *context)
 {
-        static int reported;
         u8 opcodes[4];
         unsigned long rip = vcpu->arch.rip;
         unsigned long rip_linear;
 
-        rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
-
-        if (reported)
+        if (!printk_ratelimit())
                 return;
 
+        rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
+
         emulator_read_std(rip_linear, (void *)opcodes, 4, vcpu);
 
         printk(KERN_ERR "emulation failed (%s) rip %lx %02x %02x %02x %02x\n",
                context, rip, opcodes[0], opcodes[1], opcodes[2], opcodes[3]);
-        reported = 1;
 }
 EXPORT_SYMBOL_GPL(kvm_report_emulation_failure);
 
@@ -2105,27 +2126,6 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
                         ? X86EMUL_MODE_PROT64 : cs_db
                         ? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
 
-                if (vcpu->arch.emulate_ctxt.mode == X86EMUL_MODE_PROT64) {
-                        vcpu->arch.emulate_ctxt.cs_base = 0;
-                        vcpu->arch.emulate_ctxt.ds_base = 0;
-                        vcpu->arch.emulate_ctxt.es_base = 0;
-                        vcpu->arch.emulate_ctxt.ss_base = 0;
-                } else {
-                        vcpu->arch.emulate_ctxt.cs_base =
-                                        get_segment_base(vcpu, VCPU_SREG_CS);
-                        vcpu->arch.emulate_ctxt.ds_base =
-                                        get_segment_base(vcpu, VCPU_SREG_DS);
-                        vcpu->arch.emulate_ctxt.es_base =
-                                        get_segment_base(vcpu, VCPU_SREG_ES);
-                        vcpu->arch.emulate_ctxt.ss_base =
-                                        get_segment_base(vcpu, VCPU_SREG_SS);
-                }
-
-                vcpu->arch.emulate_ctxt.gs_base =
-                                        get_segment_base(vcpu, VCPU_SREG_GS);
-                vcpu->arch.emulate_ctxt.fs_base =
-                                        get_segment_base(vcpu, VCPU_SREG_FS);
-
                 r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
 
                 /* Reject the instructions other than VMCALL/VMMCALL when
@@ -2300,9 +2300,10 @@ static void pio_string_write(struct kvm_io_device *pio_dev,
 }
 
 static struct kvm_io_device *vcpu_find_pio_dev(struct kvm_vcpu *vcpu,
-                                               gpa_t addr)
+                                               gpa_t addr, int len,
+                                               int is_write)
 {
-        return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr);
+        return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr, len, is_write);
 }
 
 int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
@@ -2331,11 +2332,10 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 
         kvm_x86_ops->cache_regs(vcpu);
         memcpy(vcpu->arch.pio_data, &vcpu->arch.regs[VCPU_REGS_RAX], 4);
-        kvm_x86_ops->decache_regs(vcpu);
 
         kvm_x86_ops->skip_emulated_instruction(vcpu);
 
-        pio_dev = vcpu_find_pio_dev(vcpu, port);
+        pio_dev = vcpu_find_pio_dev(vcpu, port, size, !in);
         if (pio_dev) {
                 kernel_pio(pio_dev, vcpu, vcpu->arch.pio_data);
                 complete_pio(vcpu);
@@ -2417,7 +2417,9 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
                 }
         }
 
-        pio_dev = vcpu_find_pio_dev(vcpu, port);
+        pio_dev = vcpu_find_pio_dev(vcpu, port,
+                                    vcpu->arch.pio.cur_count,
+                                    !vcpu->arch.pio.in);
         if (!vcpu->arch.pio.in) {
                 /* string PIO write */
                 ret = pio_copy_data(vcpu);
@@ -2600,27 +2602,41 @@ void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
 
 unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
 {
+        unsigned long value;
+
         kvm_x86_ops->decache_cr4_guest_bits(vcpu);
         switch (cr) {
         case 0:
-                return vcpu->arch.cr0;
+                value = vcpu->arch.cr0;
+                break;
         case 2:
-                return vcpu->arch.cr2;
+                value = vcpu->arch.cr2;
+                break;
         case 3:
-                return vcpu->arch.cr3;
+                value = vcpu->arch.cr3;
+                break;
         case 4:
-                return vcpu->arch.cr4;
+                value = vcpu->arch.cr4;
+                break;
         case 8:
-                return kvm_get_cr8(vcpu);
+                value = kvm_get_cr8(vcpu);
+                break;
         default:
                 vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
                 return 0;
         }
+        KVMTRACE_3D(CR_READ, vcpu, (u32)cr, (u32)value,
+                    (u32)((u64)value >> 32), handler);
+
+        return value;
 }
 
 void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long val,
                      unsigned long *rflags)
 {
+        KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr, (u32)val,
+                    (u32)((u64)val >> 32), handler);
+
         switch (cr) {
         case 0:
                 kvm_set_cr0(vcpu, mk_cr_64(vcpu->arch.cr0, val));
@@ -2771,8 +2787,10 @@ static void vapic_exit(struct kvm_vcpu *vcpu)
         if (!apic || !apic->vapic_addr)
                 return;
 
+        down_read(&vcpu->kvm->slots_lock);
         kvm_release_page_dirty(apic->vapic_page);
         mark_page_dirty(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
+        up_read(&vcpu->kvm->slots_lock);
 }
 
 static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
@@ -2928,9 +2946,7 @@ out:
 
         post_kvm_run_save(vcpu, kvm_run);
 
-        down_read(&vcpu->kvm->slots_lock);
         vapic_exit(vcpu);
-        up_read(&vcpu->kvm->slots_lock);
 
         return r;
 }
@@ -2942,15 +2958,15 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
         vcpu_load(vcpu);
 
+        if (vcpu->sigset_active)
+                sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
+
         if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) {
                 kvm_vcpu_block(vcpu);
-                vcpu_put(vcpu);
-                return -EAGAIN;
+                r = -EAGAIN;
+                goto out;
         }
 
-        if (vcpu->sigset_active)
-                sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
-
         /* re-sync apic's tpr */
         if (!irqchip_in_kernel(vcpu->kvm))
                 kvm_set_cr8(vcpu, kvm_run->cr8);
@@ -3070,8 +3086,8 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
         return 0;
 }
 
-static void get_segment(struct kvm_vcpu *vcpu,
-                        struct kvm_segment *var, int seg)
+void kvm_get_segment(struct kvm_vcpu *vcpu,
+                     struct kvm_segment *var, int seg)
 {
         kvm_x86_ops->get_segment(vcpu, var, seg);
 }
@@ -3080,7 +3096,7 @@ void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l)
 {
         struct kvm_segment cs;
 
-        get_segment(vcpu, &cs, VCPU_SREG_CS);
+        kvm_get_segment(vcpu, &cs, VCPU_SREG_CS);
         *db = cs.db;
         *l = cs.l;
 }
@@ -3094,15 +3110,15 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 
         vcpu_load(vcpu);
 
-        get_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
-        get_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
-        get_segment(vcpu, &sregs->es, VCPU_SREG_ES);
-        get_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
-        get_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
-        get_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
+        kvm_get_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
+        kvm_get_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
+        kvm_get_segment(vcpu, &sregs->es, VCPU_SREG_ES);
+        kvm_get_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
+        kvm_get_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
+        kvm_get_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
 
-        get_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
-        get_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+        kvm_get_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
+        kvm_get_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
         kvm_x86_ops->get_idt(vcpu, &dt);
         sregs->idt.limit = dt.limit;
@@ -3154,7 +3170,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
         return 0;
 }
 
-static void set_segment(struct kvm_vcpu *vcpu,
+static void kvm_set_segment(struct kvm_vcpu *vcpu,
                         struct kvm_segment *var, int seg)
 {
         kvm_x86_ops->set_segment(vcpu, var, seg);
@@ -3168,6 +3184,10 @@ static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector,
         kvm_desct->base |= seg_desc->base2 << 24;
         kvm_desct->limit = seg_desc->limit0;
         kvm_desct->limit |= seg_desc->limit << 16;
+        if (seg_desc->g) {
+                kvm_desct->limit <<= 12;
+                kvm_desct->limit |= 0xfff;
+        }
         kvm_desct->selector = selector;
         kvm_desct->type = seg_desc->type;
         kvm_desct->present = seg_desc->p;
@@ -3191,7 +3211,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu,
         if (selector & 1 << 2) {
                 struct kvm_segment kvm_seg;
 
-                get_segment(vcpu, &kvm_seg, VCPU_SREG_LDTR);
+                kvm_get_segment(vcpu, &kvm_seg, VCPU_SREG_LDTR);
 
                 if (kvm_seg.unusable)
                         dtable->limit = 0;
@@ -3207,6 +3227,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu,
 static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
                                          struct desc_struct *seg_desc)
 {
+        gpa_t gpa;
         struct descriptor_table dtable;
         u16 index = selector >> 3;
 
@@ -3216,13 +3237,16 @@ static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
                 kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc);
                 return 1;
         }
-        return kvm_read_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8);
+        gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
+        gpa += index * 8;
+        return kvm_read_guest(vcpu->kvm, gpa, seg_desc, 8);
 }
 
 /* allowed just for 8 bytes segments */
 static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
                                          struct desc_struct *seg_desc)
 {
+        gpa_t gpa;
         struct descriptor_table dtable;
         u16 index = selector >> 3;
 
@@ -3230,7 +3254,9 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 
         if (dtable.limit < index * 8 + 7)
                 return 1;
-        return kvm_write_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8);
+        gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
+        gpa += index * 8;
+        return kvm_write_guest(vcpu->kvm, gpa, seg_desc, 8);
 }
 
 static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
@@ -3242,62 +3268,14 @@ static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
         base_addr |= (seg_desc->base1 << 16);
         base_addr |= (seg_desc->base2 << 24);
 
-        return base_addr;
-}
-
-static int load_tss_segment32(struct kvm_vcpu *vcpu,
-                              struct desc_struct *seg_desc,
-                              struct tss_segment_32 *tss)
-{
-        u32 base_addr;
-
-        base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-        return kvm_read_guest(vcpu->kvm, base_addr, tss,
-                              sizeof(struct tss_segment_32));
-}
-
-static int save_tss_segment32(struct kvm_vcpu *vcpu,
-                              struct desc_struct *seg_desc,
-                              struct tss_segment_32 *tss)
-{
-        u32 base_addr;
-
-        base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-        return kvm_write_guest(vcpu->kvm, base_addr, tss,
-                               sizeof(struct tss_segment_32));
-}
-
-static int load_tss_segment16(struct kvm_vcpu *vcpu,
-                              struct desc_struct *seg_desc,
-                              struct tss_segment_16 *tss)
-{
-        u32 base_addr;
-
-        base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-        return kvm_read_guest(vcpu->kvm, base_addr, tss,
-                              sizeof(struct tss_segment_16));
-}
-
-static int save_tss_segment16(struct kvm_vcpu *vcpu,
-                              struct desc_struct *seg_desc,
-                              struct tss_segment_16 *tss)
-{
-        u32 base_addr;
-
-        base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-        return kvm_write_guest(vcpu->kvm, base_addr, tss,
-                               sizeof(struct tss_segment_16));
+        return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr);
 }
 
 static u16 get_segment_selector(struct kvm_vcpu *vcpu, int seg)
 {
         struct kvm_segment kvm_seg;
 
-        get_segment(vcpu, &kvm_seg, seg);
+        kvm_get_segment(vcpu, &kvm_seg, seg);
         return kvm_seg.selector;
 }
 
@@ -3313,8 +3291,8 @@ static int load_segment_descriptor_to_kvm_desct(struct kvm_vcpu *vcpu,
         return 0;
 }
 
-static int load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
-                                   int type_bits, int seg)
+int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
+                                int type_bits, int seg)
 {
         struct kvm_segment kvm_seg;
 
@@ -3327,7 +3305,7 @@ static int load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
                 if (!kvm_seg.s)
                         kvm_seg.unusable = 1;
 
-        set_segment(vcpu, &kvm_seg, seg);
+        kvm_set_segment(vcpu, &kvm_seg, seg);
         return 0;
 }
 
@@ -3373,25 +3351,25 @@ static int load_state_from_tss32(struct kvm_vcpu *vcpu,
         vcpu->arch.regs[VCPU_REGS_RSI] = tss->esi;
         vcpu->arch.regs[VCPU_REGS_RDI] = tss->edi;
 
-        if (load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
+        if (kvm_load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
                 return 1;
 
-        if (load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
+        if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
                 return 1;
 
-        if (load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
+        if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
                 return 1;
 
-        if (load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
+        if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
                 return 1;
 
-        if (load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
+        if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
                 return 1;
 
-        if (load_segment_descriptor(vcpu, tss->fs, 1, VCPU_SREG_FS))
+        if (kvm_load_segment_descriptor(vcpu, tss->fs, 1, VCPU_SREG_FS))
                 return 1;
 
-        if (load_segment_descriptor(vcpu, tss->gs, 1, VCPU_SREG_GS))
+        if (kvm_load_segment_descriptor(vcpu, tss->gs, 1, VCPU_SREG_GS))
                 return 1;
         return 0;
 }
@@ -3432,38 +3410,44 @@ static int load_state_from_tss16(struct kvm_vcpu *vcpu,
         vcpu->arch.regs[VCPU_REGS_RSI] = tss->si;
         vcpu->arch.regs[VCPU_REGS_RDI] = tss->di;
 
-        if (load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
+        if (kvm_load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
                 return 1;
 
-        if (load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
+        if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
                 return 1;
 
-        if (load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
+        if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
                 return 1;
 
-        if (load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
+        if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
                 return 1;
 
-        if (load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
+        if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
                 return 1;
         return 0;
 }
 
-int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
-                       struct desc_struct *cseg_desc,
+static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
+                       u32 old_tss_base,
                        struct desc_struct *nseg_desc)
 {
         struct tss_segment_16 tss_segment_16;
         int ret = 0;
 
-        if (load_tss_segment16(vcpu, cseg_desc, &tss_segment_16))
+        if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
+                           sizeof tss_segment_16))
                 goto out;
 
         save_state_to_tss16(vcpu, &tss_segment_16);
-        save_tss_segment16(vcpu, cseg_desc, &tss_segment_16);
 
-        if (load_tss_segment16(vcpu, nseg_desc, &tss_segment_16))
+        if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
+                            sizeof tss_segment_16))
                 goto out;
+
+        if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
+                           &tss_segment_16, sizeof tss_segment_16))
+                goto out;
+
         if (load_state_from_tss16(vcpu, &tss_segment_16))
                 goto out;
 
@@ -3472,21 +3456,27 @@ out:
         return ret;
 }
 
-int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
-                       struct desc_struct *cseg_desc,
+static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
+                       u32 old_tss_base,
                        struct desc_struct *nseg_desc)
 {
         struct tss_segment_32 tss_segment_32;
         int ret = 0;
 
-        if (load_tss_segment32(vcpu, cseg_desc, &tss_segment_32))
+        if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
+                           sizeof tss_segment_32))
                 goto out;
 
         save_state_to_tss32(vcpu, &tss_segment_32);
-        save_tss_segment32(vcpu, cseg_desc, &tss_segment_32);
 
-        if (load_tss_segment32(vcpu, nseg_desc, &tss_segment_32))
+        if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
+                            sizeof tss_segment_32))
                 goto out;
+
+        if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
+                           &tss_segment_32, sizeof tss_segment_32))
+                goto out;
+
         if (load_state_from_tss32(vcpu, &tss_segment_32))
                 goto out;
 
@@ -3501,16 +3491,20 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
         struct desc_struct cseg_desc;
         struct desc_struct nseg_desc;
         int ret = 0;
+        u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR);
+        u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR);
 
-        get_segment(vcpu, &tr_seg, VCPU_SREG_TR);
+        old_tss_base = vcpu->arch.mmu.gva_to_gpa(vcpu, old_tss_base);
 
+        /* FIXME: Handle errors. Failure to read either TSS or their
+         * descriptors should generate a pagefault.
+         */
         if (load_guest_segment_descriptor(vcpu, tss_selector, &nseg_desc))
                 goto out;
 
-        if (load_guest_segment_descriptor(vcpu, tr_seg.selector, &cseg_desc))
+        if (load_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc))
                 goto out;
 
-
         if (reason != TASK_SWITCH_IRET) {
                 int cpl;
 
@@ -3528,8 +3522,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 
         if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) {
                 cseg_desc.type &= ~(1 << 1); //clear the B flag
-                save_guest_segment_descriptor(vcpu, tr_seg.selector,
-                                              &cseg_desc);
+                save_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc);
         }
 
         if (reason == TASK_SWITCH_IRET) {
@@ -3541,10 +3534,10 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
         kvm_x86_ops->cache_regs(vcpu);
 
         if (nseg_desc.type & 8)
-                ret = kvm_task_switch_32(vcpu, tss_selector, &cseg_desc,
+                ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_base,
                                          &nseg_desc);
         else
-                ret = kvm_task_switch_16(vcpu, tss_selector, &cseg_desc,
+                ret = kvm_task_switch_16(vcpu, tss_selector, old_tss_base,
                                          &nseg_desc);
 
         if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) {
@@ -3561,7 +3554,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
         kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 | X86_CR0_TS);
         seg_desct_to_kvm_desct(&nseg_desc, tss_selector, &tr_seg);
         tr_seg.type = 11;
-        set_segment(vcpu, &tr_seg, VCPU_SREG_TR);
+        kvm_set_segment(vcpu, &tr_seg, VCPU_SREG_TR);
 out:
         kvm_x86_ops->decache_regs(vcpu);
         return ret;
@@ -3628,15 +3621,15 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
                 }
         }
 
-        set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
-        set_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
-        set_segment(vcpu, &sregs->es, VCPU_SREG_ES);
-        set_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
-        set_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
-        set_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
+        kvm_set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
+        kvm_set_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
+        kvm_set_segment(vcpu, &sregs->es, VCPU_SREG_ES);
+        kvm_set_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
+        kvm_set_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
+        kvm_set_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
 
-        set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
-        set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+        kvm_set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
+        kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
         vcpu_put(vcpu);
 
@@ -3751,14 +3744,14 @@ void fx_init(struct kvm_vcpu *vcpu)
          * allocate ram with GFP_KERNEL.
          */
         if (!used_math())
-                fx_save(&vcpu->arch.host_fx_image);
+                kvm_fx_save(&vcpu->arch.host_fx_image);
 
         /* Initialize guest FPU by resetting ours and saving into guest's */
         preempt_disable();
-        fx_save(&vcpu->arch.host_fx_image);
-        fx_finit();
-        fx_save(&vcpu->arch.guest_fx_image);
-        fx_restore(&vcpu->arch.host_fx_image);
+        kvm_fx_save(&vcpu->arch.host_fx_image);
+        kvm_fx_finit();
+        kvm_fx_save(&vcpu->arch.guest_fx_image);
+        kvm_fx_restore(&vcpu->arch.host_fx_image);
         preempt_enable();
 
         vcpu->arch.cr0 |= X86_CR0_ET;
@@ -3775,8 +3768,8 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
                 return;
 
         vcpu->guest_fpu_loaded = 1;
-        fx_save(&vcpu->arch.host_fx_image);
-        fx_restore(&vcpu->arch.guest_fx_image);
+        kvm_fx_save(&vcpu->arch.host_fx_image);
+        kvm_fx_restore(&vcpu->arch.guest_fx_image);
 }
 EXPORT_SYMBOL_GPL(kvm_load_guest_fpu);
 
@@ -3786,8 +3779,8 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
                 return;
 
         vcpu->guest_fpu_loaded = 0;
-        fx_save(&vcpu->arch.guest_fx_image);
-        fx_restore(&vcpu->arch.host_fx_image);
+        kvm_fx_save(&vcpu->arch.guest_fx_image);
+        kvm_fx_restore(&vcpu->arch.host_fx_image);
         ++vcpu->stat.fpu_reload;
 }
 EXPORT_SYMBOL_GPL(kvm_put_guest_fpu);
@@ -4016,6 +4009,11 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
         return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+        kvm_mmu_zap_all(kvm);
+}
+
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
         return vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 932f216d890c..f2f90468f8b1 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -121,7 +121,7 @@ static u16 opcode_table[256] = {
         0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
         0, 0, 0, 0,
         /* 0x68 - 0x6F */
-        0, 0, ImplicitOps | Mov | Stack, 0,
+        SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
         SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* insb, insw/insd */
         SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* outsb, outsw/outsd */
         /* 0x70 - 0x77 */
@@ -138,9 +138,11 @@ static u16 opcode_table[256] = {
         /* 0x88 - 0x8F */
         ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
         ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-        0, ModRM | DstReg, 0, Group | Group1A,
-        /* 0x90 - 0x9F */
-        0, 0, 0, 0, 0, 0, 0, 0,
+        DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
+        DstReg | SrcMem | ModRM | Mov, Group | Group1A,
+        /* 0x90 - 0x97 */
+        DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
+        /* 0x98 - 0x9F */
         0, 0, 0, 0, ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
         /* 0xA0 - 0xA7 */
         ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
@@ -152,7 +154,8 @@ static u16 opcode_table[256] = {
         ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
         ByteOp | ImplicitOps | String, ImplicitOps | String,
         /* 0xB0 - 0xBF */
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+        0, 0, 0, 0, 0, 0, 0, 0,
+        DstReg | SrcImm | Mov, 0, 0, 0, 0, 0, 0, 0,
         /* 0xC0 - 0xC7 */
         ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
         0, ImplicitOps | Stack, 0, 0,
@@ -168,7 +171,8 @@ static u16 opcode_table[256] = {
         /* 0xE0 - 0xE7 */
         0, 0, 0, 0, 0, 0, 0, 0,
         /* 0xE8 - 0xEF */
-        ImplicitOps | Stack, SrcImm|ImplicitOps, 0, SrcImmByte|ImplicitOps,
+        ImplicitOps | Stack, SrcImm | ImplicitOps,
+        ImplicitOps, SrcImmByte | ImplicitOps,
         0, 0, 0, 0,
         /* 0xF0 - 0xF7 */
         0, 0, 0, 0,
@@ -215,7 +219,7 @@ static u16 twobyte_table[256] = {
         /* 0xA0 - 0xA7 */
         0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
         /* 0xA8 - 0xAF */
-        0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
+        0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, ModRM, 0,
         /* 0xB0 - 0xB7 */
         ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
             DstMem | SrcReg | ModRM | BitOp,
@@ -518,6 +522,39 @@ static inline void jmp_rel(struct decode_cache *c, int rel)
         register_address_increment(c, &c->eip, rel);
 }
 
+static void set_seg_override(struct decode_cache *c, int seg)
+{
+        c->has_seg_override = true;
+        c->seg_override = seg;
+}
+
+static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
+{
+        if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
+                return 0;
+
+        return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
+}
+
+static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
+                                       struct decode_cache *c)
+{
+        if (!c->has_seg_override)
+                return 0;
+
+        return seg_base(ctxt, c->seg_override);
+}
+
+static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
+{
+        return seg_base(ctxt, VCPU_SREG_ES);
+}
+
+static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
+{
+        return seg_base(ctxt, VCPU_SREG_SS);
+}
+
 static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
                               struct x86_emulate_ops *ops,
                               unsigned long linear, u8 *dest)
@@ -660,7 +697,7 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 {
         struct decode_cache *c = &ctxt->decode;
         u8 sib;
-        int index_reg = 0, base_reg = 0, scale, rip_relative = 0;
+        int index_reg = 0, base_reg = 0, scale;
         int rc = 0;
 
         if (c->rex_prefix) {
@@ -731,47 +768,28 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
                 }
                 if (c->modrm_rm == 2 || c->modrm_rm == 3 ||
                     (c->modrm_rm == 6 && c->modrm_mod != 0))
-                        if (!c->override_base)
-                                c->override_base = &ctxt->ss_base;
+                        if (!c->has_seg_override)
+                                set_seg_override(c, VCPU_SREG_SS);
                 c->modrm_ea = (u16)c->modrm_ea;
         } else {
                 /* 32/64-bit ModR/M decode. */
-                switch (c->modrm_rm) {
-                case 4:
-                case 12:
+                if ((c->modrm_rm & 7) == 4) {
                         sib = insn_fetch(u8, 1, c->eip);
                         index_reg |= (sib >> 3) & 7;
                         base_reg |= sib & 7;
                         scale = sib >> 6;
 
-                        switch (base_reg) {
-                        case 5:
-                                if (c->modrm_mod != 0)
-                                        c->modrm_ea += c->regs[base_reg];
-                                else
-                                        c->modrm_ea +=
-                                                insn_fetch(s32, 4, c->eip);
-                                break;
-                        default:
+                        if ((base_reg & 7) == 5 && c->modrm_mod == 0)
+                                c->modrm_ea += insn_fetch(s32, 4, c->eip);
+                        else
                                 c->modrm_ea += c->regs[base_reg];
-                        }
-                        switch (index_reg) {
-                        case 4:
-                                break;
-                        default:
+                        if (index_reg != 4)
                                 c->modrm_ea += c->regs[index_reg] << scale;
-                        }
-                        break;
-                case 5:
-                        if (c->modrm_mod != 0)
-                                c->modrm_ea += c->regs[c->modrm_rm];
-                        else if (ctxt->mode == X86EMUL_MODE_PROT64)
-                                rip_relative = 1;
-                        break;
-                default:
+                } else if ((c->modrm_rm & 7) == 5 && c->modrm_mod == 0) {
+                        if (ctxt->mode == X86EMUL_MODE_PROT64)
+                                c->rip_relative = 1;
+                } else
                         c->modrm_ea += c->regs[c->modrm_rm];
-                        break;
-                }
                 switch (c->modrm_mod) {
                 case 0:
                         if (c->modrm_rm == 5)
@@ -785,22 +803,6 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
                         break;
                 }
         }
-        if (rip_relative) {
-                c->modrm_ea += c->eip;
-                switch (c->d & SrcMask) {
-                case SrcImmByte:
-                        c->modrm_ea += 1;
-                        break;
-                case SrcImm:
-                        if (c->d & ByteOp)
-                                c->modrm_ea += 1;
-                        else
-                                if (c->op_bytes == 8)
-                                        c->modrm_ea += 4;
-                                else
-                                        c->modrm_ea += c->op_bytes;
-                }
-        }
 done:
         return rc;
 }
@@ -838,6 +840,7 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 
         memset(c, 0, sizeof(struct decode_cache));
         c->eip = ctxt->vcpu->arch.rip;
+        ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
         memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
 
         switch (mode) {
@@ -876,23 +879,15 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
                                 /* switch between 2/4 bytes */
                                 c->ad_bytes = def_ad_bytes ^ 6;
                         break;
+                case 0x26:      /* ES override */
                 case 0x2e:      /* CS override */
-                        c->override_base = &ctxt->cs_base;
-                        break;
+                case 0x36:      /* SS override */
                 case 0x3e:      /* DS override */
-                        c->override_base = &ctxt->ds_base;
-                        break;
-                case 0x26:      /* ES override */
-                        c->override_base = &ctxt->es_base;
+                        set_seg_override(c, (c->b >> 3) & 3);
                         break;
                 case 0x64:      /* FS override */
-                        c->override_base = &ctxt->fs_base;
-                        break;
                 case 0x65:      /* GS override */
-                        c->override_base = &ctxt->gs_base;
-                        break;
-                case 0x36:      /* SS override */
-                        c->override_base = &ctxt->ss_base;
+                        set_seg_override(c, c->b & 7);
                         break;
                 case 0x40 ... 0x4f: /* REX */
                         if (mode != X86EMUL_MODE_PROT64)
@@ -964,15 +959,11 @@ done_prefixes:
         if (rc)
                 goto done;
 
-        if (!c->override_base)
-                c->override_base = &ctxt->ds_base;
-        if (mode == X86EMUL_MODE_PROT64 &&
-            c->override_base != &ctxt->fs_base &&
-            c->override_base != &ctxt->gs_base)
-                c->override_base = NULL;
+        if (!c->has_seg_override)
+                set_seg_override(c, VCPU_SREG_DS);
 
-        if (c->override_base)
-                c->modrm_ea += *c->override_base;
+        if (!(!c->twobyte && c->b == 0x8d))
+                c->modrm_ea += seg_override_base(ctxt, c);
 
         if (c->ad_bytes != 8)
                 c->modrm_ea = (u32)c->modrm_ea;
@@ -1049,6 +1040,7 @@ done_prefixes:
                 break;
         case DstMem:
                 if ((c->d & ModRM) && c->modrm_mod == 3) {
+                        c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
                         c->dst.type = OP_REG;
                         c->dst.val = c->dst.orig_val = c->modrm_val;
                         c->dst.ptr = c->modrm_ptr;
@@ -1058,6 +1050,9 @@ done_prefixes:
                 break;
         }
 
+        if (c->rip_relative)
+                c->modrm_ea += c->eip;
+
 done:
         return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
 }
@@ -1070,7 +1065,7 @@ static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
         c->dst.bytes = c->op_bytes;
         c->dst.val = c->src.val;
         register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
-        c->dst.ptr = (void *) register_address(c, ctxt->ss_base,
+        c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
                                                c->regs[VCPU_REGS_RSP]);
 }
 
@@ -1080,7 +1075,7 @@ static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
         struct decode_cache *c = &ctxt->decode;
         int rc;
 
-        rc = ops->read_std(register_address(c, ctxt->ss_base,
+        rc = ops->read_std(register_address(c, ss_base(ctxt),
                                             c->regs[VCPU_REGS_RSP]),
                            &c->dst.val, c->dst.bytes, ctxt->vcpu);
         if (rc != 0)
@@ -1402,11 +1397,11 @@ special_insn:
                 register_address_increment(c, &c->regs[VCPU_REGS_RSP],
                                            -c->op_bytes);
                 c->dst.ptr = (void *) register_address(
-                        c, ctxt->ss_base, c->regs[VCPU_REGS_RSP]);
+                        c, ss_base(ctxt), c->regs[VCPU_REGS_RSP]);
                 break;
         case 0x58 ... 0x5f: /* pop reg */
         pop_instruction:
-                if ((rc = ops->read_std(register_address(c, ctxt->ss_base,
+                if ((rc = ops->read_std(register_address(c, ss_base(ctxt),
                         c->regs[VCPU_REGS_RSP]), c->dst.ptr,
                         c->op_bytes, ctxt->vcpu)) != 0)
                         goto done;
@@ -1420,9 +1415,8 @@ special_insn:
                         goto cannot_emulate;
                 c->dst.val = (s32) c->src.val;
                 break;
+        case 0x68: /* push imm */
         case 0x6a: /* push imm8 */
-                c->src.val = 0L;
-                c->src.val = insn_fetch(s8, 1, c->eip);
                 emulate_push(ctxt);
                 break;
         case 0x6c:              /* insb */
@@ -1433,7 +1427,7 @@ special_insn:
                                 c->rep_prefix ?
                                 address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
                                 (ctxt->eflags & EFLG_DF),
-                                register_address(c, ctxt->es_base,
+                                register_address(c, es_base(ctxt),
                                                  c->regs[VCPU_REGS_RDI]),
                                 c->rep_prefix,
                                 c->regs[VCPU_REGS_RDX]) == 0) {
@@ -1449,9 +1443,8 @@ special_insn:
                                 c->rep_prefix ?
                                 address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
                                 (ctxt->eflags & EFLG_DF),
-                                register_address(c, c->override_base ?
-                                                        *c->override_base :
-                                                        ctxt->ds_base,
+                                         register_address(c,
+                                          seg_override_base(ctxt, c),
                                                  c->regs[VCPU_REGS_RSI]),
                                 c->rep_prefix,
                                 c->regs[VCPU_REGS_RDX]) == 0) {
@@ -1490,6 +1483,7 @@ special_insn:
                 emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
                 break;
         case 0x86 ... 0x87:     /* xchg */
+        xchg:
                 /* Write back the register source. */
                 switch (c->dst.bytes) {
                 case 1:
@@ -1514,14 +1508,60 @@ special_insn:
                 break;
         case 0x88 ... 0x8b:     /* mov */
                 goto mov;
+        case 0x8c: { /* mov r/m, sreg */
+                struct kvm_segment segreg;
+
+                if (c->modrm_reg <= 5)
+                        kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
+                else {
+                        printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
+                               c->modrm);
+                        goto cannot_emulate;
+                }
+                c->dst.val = segreg.selector;
+                break;
+        }
         case 0x8d: /* lea r16/r32, m */
                 c->dst.val = c->modrm_ea;
                 break;
+        case 0x8e: { /* mov seg, r/m16 */
+                uint16_t sel;
+                int type_bits;
+                int err;
+
+                sel = c->src.val;
+                if (c->modrm_reg <= 5) {
+                        type_bits = (c->modrm_reg == 1) ? 9 : 1;
+                        err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
+                                                          type_bits, c->modrm_reg);
+                } else {
+                        printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
+                                        c->modrm);
+                        goto cannot_emulate;
+                }
+
+                if (err < 0)
+                        goto cannot_emulate;
+
+                c->dst.type = OP_NONE;  /* Disable writeback. */
+                break;
+        }
         case 0x8f:              /* pop (sole member of Grp1a) */
                 rc = emulate_grp1a(ctxt, ops);
                 if (rc != 0)
                         goto done;
                 break;
+        case 0x90: /* nop / xchg r8,rax */
+                if (!(c->rex_prefix & 1)) { /* nop */
+                        c->dst.type = OP_NONE;
+                        break;
+                }
+        case 0x91 ... 0x97: /* xchg reg,rax */
+                c->src.type = c->dst.type = OP_REG;
+                c->src.bytes = c->dst.bytes = c->op_bytes;
+                c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
+                c->src.val = *(c->src.ptr);
+                goto xchg;
         case 0x9c: /* pushf */
                 c->src.val =  (unsigned long) ctxt->eflags;
                 emulate_push(ctxt);
@@ -1540,11 +1580,10 @@ special_insn:
                 c->dst.type = OP_MEM;
                 c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
                 c->dst.ptr = (unsigned long *)register_address(c,
-                                                   ctxt->es_base,
+                                                   es_base(ctxt),
                                                    c->regs[VCPU_REGS_RDI]);
                 if ((rc = ops->read_emulated(register_address(c,
-                      c->override_base ? *c->override_base :
-                                        ctxt->ds_base,
+                                           seg_override_base(ctxt, c),
                                         c->regs[VCPU_REGS_RSI]),
                                         &c->dst.val,
                                         c->dst.bytes, ctxt->vcpu)) != 0)
@@ -1560,8 +1599,7 @@ special_insn:
                 c->src.type = OP_NONE; /* Disable writeback. */
                 c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
                 c->src.ptr = (unsigned long *)register_address(c,
-                                c->override_base ? *c->override_base :
-                                                   ctxt->ds_base,
+                                       seg_override_base(ctxt, c),
                                                    c->regs[VCPU_REGS_RSI]);
                 if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
                                                 &c->src.val,
@@ -1572,7 +1610,7 @@ special_insn:
                 c->dst.type = OP_NONE; /* Disable writeback. */
                 c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
                 c->dst.ptr = (unsigned long *)register_address(c,
-                                                   ctxt->es_base,
+                                                   es_base(ctxt),
                                                    c->regs[VCPU_REGS_RDI]);
                 if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
                                                 &c->dst.val,
@@ -1596,7 +1634,7 @@ special_insn:
                 c->dst.type = OP_MEM;
                 c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
                 c->dst.ptr = (unsigned long *)register_address(c,
-                                                   ctxt->es_base,
+                                                   es_base(ctxt),
                                                    c->regs[VCPU_REGS_RDI]);
                 c->dst.val = c->regs[VCPU_REGS_RAX];
                 register_address_increment(c, &c->regs[VCPU_REGS_RDI],
@@ -1608,8 +1646,7 @@ special_insn:
                 c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
                 c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
                 if ((rc = ops->read_emulated(register_address(c,
-                                c->override_base ? *c->override_base :
-                                                   ctxt->ds_base,
+                                                 seg_override_base(ctxt, c),
                                                  c->regs[VCPU_REGS_RSI]),
                                                  &c->dst.val,
                                                  c->dst.bytes,
@@ -1622,6 +1659,8 @@ special_insn:
         case 0xae ... 0xaf:     /* scas */
                 DPRINTF("Urk! I don't handle SCAS.\n");
                 goto cannot_emulate;
+        case 0xb8: /* mov r, imm */
+                goto mov;
         case 0xc0 ... 0xc1:
                 emulate_grp2(ctxt);
                 break;
@@ -1660,13 +1699,39 @@ special_insn:
                 break;
         }
         case 0xe9: /* jmp rel */
-        case 0xeb: /* jmp rel short */
+                goto jmp;
+        case 0xea: /* jmp far */ {
+                uint32_t eip;
+                uint16_t sel;
+
+                switch (c->op_bytes) {
+                case 2:
+                        eip = insn_fetch(u16, 2, c->eip);
+                        break;
+                case 4:
+                        eip = insn_fetch(u32, 4, c->eip);
+                        break;
+                default:
+                        DPRINTF("jmp far: Invalid op_bytes\n");
+                        goto cannot_emulate;
+                }
+                sel = insn_fetch(u16, 2, c->eip);
+                if (kvm_load_segment_descriptor(ctxt->vcpu, sel, 9, VCPU_SREG_CS) < 0) {
+                        DPRINTF("jmp far: Failed to load CS descriptor\n");
+                        goto cannot_emulate;
+                }
+
+                c->eip = eip;
+                break;
+        }
+        case 0xeb:
+              jmp:              /* jmp rel short */
                 jmp_rel(c, c->src.val);
                 c->dst.type = OP_NONE; /* Disable writeback. */
                 break;
         case 0xf4:              /* hlt */
                 ctxt->vcpu->arch.halt_request = 1;
-                goto done;
+                break;
         case 0xf5:      /* cmc */
                 /* complement carry flag from eflags reg */
                 ctxt->eflags ^= EFLG_CF;
@@ -1882,6 +1947,8 @@ twobyte_insn:
                 c->src.val &= (c->dst.bytes << 3) - 1;
                 emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
                 break;
+        case 0xae:              /* clflush */
+                break;
         case 0xb0 ... 0xb1:     /* cmpxchg */
                 /*
                  * Save real source value, then compare EAX against
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 50dad44fb542..0313a5eec412 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -991,7 +991,6 @@ __init void lguest_init(void)
 #ifdef CONFIG_X86_LOCAL_APIC
         /* apic read/write intercepts */
         pv_apic_ops.apic_write = lguest_apic_write;
-        pv_apic_ops.apic_write_atomic = lguest_apic_write;
         pv_apic_ops.apic_read = lguest_apic_read;
 #endif
 
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index 48278fa7d3de..3d317836be9e 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -10,14 +10,6 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
-/*
- * Any quirks to be performed to initialize timers/irqs/etc?
- */
-int (*arch_time_init_quirk)(void);
-int (*arch_pre_intr_init_quirk)(void);
-int (*arch_intr_init_quirk)(void);
-int (*arch_trap_init_quirk)(void);
-
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI        (1)
 #else
@@ -37,8 +29,8 @@ int no_broadcast=DEFAULT_SEND_IPI;
  **/
 void __init pre_intr_init_hook(void)
 {
-        if (arch_pre_intr_init_quirk) {
-                if (arch_pre_intr_init_quirk())
+        if (x86_quirks->arch_pre_intr_init) {
+                if (x86_quirks->arch_pre_intr_init())
                         return;
         }
         init_ISA_irqs();
@@ -64,8 +56,8 @@ static struct irqaction irq2 = {
  **/
 void __init intr_init_hook(void)
 {
-        if (arch_intr_init_quirk) {
-                if (arch_intr_init_quirk())
+        if (x86_quirks->arch_intr_init) {
+                if (x86_quirks->arch_intr_init())
                         return;
         }
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -97,8 +89,8 @@ void __init pre_setup_arch_hook(void)
  **/
 void __init trap_init_hook(void)
 {
-        if (arch_trap_init_quirk) {
-                if (arch_trap_init_quirk())
+        if (x86_quirks->arch_trap_init) {
+                if (x86_quirks->arch_trap_init())
                         return;
         }
 }
@@ -111,6 +103,16 @@ static struct irqaction irq0  = {
 };
 
 /**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+        if (x86_quirks->arch_pre_time_init)
+                x86_quirks->arch_pre_time_init();
+}
+
+/**
  * time_init_hook - do any specific initialisations for the system timer.
  *
  * Description:
@@ -119,13 +121,13 @@ static struct irqaction irq0  = {
  **/
 void __init time_init_hook(void)
 {
-        if (arch_time_init_quirk) {
+        if (x86_quirks->arch_time_init) {
                 /*
                  * A nonzero return code does not mean failure, it means
                  * that the architecture quirk does not want any
                  * generic (timer) setup to be performed after this:
                  */
-                if (arch_time_init_quirk())
+                if (x86_quirks->arch_time_init())
                         return;
         }
 
diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c
index 4354ce804889..50189af14b85 100644
--- a/arch/x86/mach-es7000/es7000plat.c
+++ b/arch/x86/mach-es7000/es7000plat.c
@@ -130,10 +130,10 @@ parse_unisys_oem (char *oemptr)
                         mip_addr = val;
                         mip = (struct mip_reg *)val;
                         mip_reg = __va(mip);
-                        Dprintk("es7000_mipcfg: host_reg = 0x%lx \n",
-                                (unsigned long)host_reg);
-                        Dprintk("es7000_mipcfg: mip_reg = 0x%lx \n",
-                                (unsigned long)mip_reg);
+                        pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+                                 (unsigned long)host_reg);
+                        pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+                                 (unsigned long)mip_reg);
                         success++;
                         break;
                 case MIP_PSAI_REG:
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 9873716e9f76..2977ea37791f 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,6 +1,7 @@
 obj-y   :=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
             pat.o pgtable.o
 
+obj-$(CONFIG_HAVE_GET_USER_PAGES_FAST) += gup.o
 obj-$(CONFIG_X86_32)            += pgtable_32.o
 
 obj-$(CONFIG_HUGETLB_PAGE)      += hugetlbpage.o
@@ -21,3 +22,4 @@ obj-$(CONFIG_K8_NUMA)		+= k8topology_64.o
 endif
 obj-$(CONFIG_ACPI_NUMA)         += srat_$(BITS).o
 
+obj-$(CONFIG_MEMTEST)           += memtest.o
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index 5dfef9fa061a..62fa440678d8 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -42,7 +42,6 @@
 
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
-static bootmem_data_t node0_bdata;
 
 /*
  * numa interface - we expect the numa architecture specific code to have
@@ -385,7 +384,7 @@ void __init initmem_init(unsigned long start_pfn,
         for_each_online_node(nid)
                 memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-        NODE_DATA(0)->bdata = &node0_bdata;
+        NODE_DATA(0)->bdata = &bootmem_node_data[0];
         setup_bootmem_allocator();
 }
 
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index 0bb0caed8971..a20d1fa64b4e 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -148,8 +148,8 @@ static void note_page(struct seq_file *m, struct pg_state *st,
          * we have now. "break" is either changing perms, levels or
          * address space marker.
          */
-        prot = pgprot_val(new_prot) & ~(PTE_MASK);
-        cur = pgprot_val(st->current_prot) & ~(PTE_MASK);
+        prot = pgprot_val(new_prot) & ~(PTE_PFN_MASK);
+        cur = pgprot_val(st->current_prot) & ~(PTE_PFN_MASK);
 
         if (!st->level) {
                 /* First entry */
@@ -221,7 +221,7 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
         for (i = 0; i < PTRS_PER_PMD; i++) {
                 st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
                 if (!pmd_none(*start)) {
-                        pgprotval_t prot = pmd_val(*start) & ~PTE_MASK;
+                        pgprotval_t prot = pmd_val(*start) & PTE_FLAGS_MASK;
 
                         if (pmd_large(*start) || !pmd_present(*start))
                                 note_page(m, st, __pgprot(prot), 3);
@@ -253,7 +253,7 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
         for (i = 0; i < PTRS_PER_PUD; i++) {
                 st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
                 if (!pud_none(*start)) {
-                        pgprotval_t prot = pud_val(*start) & ~PTE_MASK;
+                        pgprotval_t prot = pud_val(*start) & PTE_FLAGS_MASK;
 
                         if (pud_large(*start) || !pud_present(*start))
                                 note_page(m, st, __pgprot(prot), 2);
@@ -288,7 +288,7 @@ static void walk_pgd_level(struct seq_file *m)
         for (i = 0; i < PTRS_PER_PGD; i++) {
                 st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
                 if (!pgd_none(*start)) {
-                        pgprotval_t prot = pgd_val(*start) & ~PTE_MASK;
+                        pgprotval_t prot = pgd_val(*start) & PTE_FLAGS_MASK;
 
                         if (pgd_large(*start) || !pgd_present(*start))
                                 note_page(m, &st, __pgprot(prot), 1);
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
new file mode 100644
index 000000000000..3085f25b4355
--- /dev/null
+++ b/arch/x86/mm/gup.c
@@ -0,0 +1,295 @@
+/*
+ * Lockless get_user_pages_fast for x86
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/vmstat.h>
+#include <linux/highmem.h>
+
+#include <asm/pgtable.h>
+
+static inline pte_t gup_get_pte(pte_t *ptep)
+{
+#ifndef CONFIG_X86_PAE
+        return *ptep;
+#else
+        /*
+         * With get_user_pages_fast, we walk down the pagetables without taking
+         * any locks.  For this we would like to load the pointers atoimcally,
+         * but that is not possible (without expensive cmpxchg8b) on PAE.  What
+         * we do have is the guarantee that a pte will only either go from not
+         * present to present, or present to not present or both -- it will not
+         * switch to a completely different present page without a TLB flush in
+         * between; something that we are blocking by holding interrupts off.
+         *
+         * Setting ptes from not present to present goes:
+         * ptep->pte_high = h;
+         * smp_wmb();
+         * ptep->pte_low = l;
+         *
+         * And present to not present goes:
+         * ptep->pte_low = 0;
+         * smp_wmb();
+         * ptep->pte_high = 0;
+         *
+         * We must ensure here that the load of pte_low sees l iff pte_high
+         * sees h. We load pte_high *after* loading pte_low, which ensures we
+         * don't see an older value of pte_high.  *Then* we recheck pte_low,
+         * which ensures that we haven't picked up a changed pte high. We might
+         * have got rubbish values from pte_low and pte_high, but we are
+         * guaranteed that pte_low will not have the present bit set *unless*
+         * it is 'l'. And get_user_pages_fast only operates on present ptes, so
+         * we're safe.
+         *
+         * gup_get_pte should not be used or copied outside gup.c without being
+         * very careful -- it does not atomically load the pte or anything that
+         * is likely to be useful for you.
+         */
+        pte_t pte;
+
+retry:
+        pte.pte_low = ptep->pte_low;
+        smp_rmb();
+        pte.pte_high = ptep->pte_high;
+        smp_rmb();
+        if (unlikely(pte.pte_low != ptep->pte_low))
+                goto retry;
+
+        return pte;
+#endif
+}
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+                unsigned long end, int write, struct page **pages, int *nr)
+{
+        unsigned long mask;
+        pte_t *ptep;
+
+        mask = _PAGE_PRESENT|_PAGE_USER;
+        if (write)
+                mask |= _PAGE_RW;
+
+        ptep = pte_offset_map(&pmd, addr);
+        do {
+                pte_t pte = gup_get_pte(ptep);
+                struct page *page;
+
+                if ((pte_val(pte) & (mask | _PAGE_SPECIAL)) != mask) {
+                        pte_unmap(ptep);
+                        return 0;
+                }
+                VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+                page = pte_page(pte);
+                get_page(page);
+                pages[*nr] = page;
+                (*nr)++;
+
+        } while (ptep++, addr += PAGE_SIZE, addr != end);
+        pte_unmap(ptep - 1);
+
+        return 1;
+}
+
+static inline void get_head_page_multiple(struct page *page, int nr)
+{
+        VM_BUG_ON(page != compound_head(page));
+        VM_BUG_ON(page_count(page) == 0);
+        atomic_add(nr, &page->_count);
+}
+
+static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
+                unsigned long end, int write, struct page **pages, int *nr)
+{
+        unsigned long mask;
+        pte_t pte = *(pte_t *)&pmd;
+        struct page *head, *page;
+        int refs;
+
+        mask = _PAGE_PRESENT|_PAGE_USER;
+        if (write)
+                mask |= _PAGE_RW;
+        if ((pte_val(pte) & mask) != mask)
+                return 0;
+        /* hugepages are never "special" */
+        VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+        VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+        refs = 0;
+        head = pte_page(pte);
+        page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+        do {
+                VM_BUG_ON(compound_head(page) != head);
+                pages[*nr] = page;
+                (*nr)++;
+                page++;
+                refs++;
+        } while (addr += PAGE_SIZE, addr != end);
+        get_head_page_multiple(head, refs);
+
+        return 1;
+}
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+                int write, struct page **pages, int *nr)
+{
+        unsigned long next;
+        pmd_t *pmdp;
+
+        pmdp = pmd_offset(&pud, addr);
+        do {
+                pmd_t pmd = *pmdp;
+
+                next = pmd_addr_end(addr, end);
+                if (pmd_none(pmd))
+                        return 0;
+                if (unlikely(pmd_large(pmd))) {
+                        if (!gup_huge_pmd(pmd, addr, next, write, pages, nr))
+                                return 0;
+                } else {
+                        if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+                                return 0;
+                }
+        } while (pmdp++, addr = next, addr != end);
+
+        return 1;
+}
+
+static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
+                unsigned long end, int write, struct page **pages, int *nr)
+{
+        unsigned long mask;
+        pte_t pte = *(pte_t *)&pud;
+        struct page *head, *page;
+        int refs;
+
+        mask = _PAGE_PRESENT|_PAGE_USER;
+        if (write)
+                mask |= _PAGE_RW;
+        if ((pte_val(pte) & mask) != mask)
+                return 0;
+        /* hugepages are never "special" */
+        VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+        VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+        refs = 0;
+        head = pte_page(pte);
+        page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
+        do {
+                VM_BUG_ON(compound_head(page) != head);
+                pages[*nr] = page;
+                (*nr)++;
+                page++;
+                refs++;
+        } while (addr += PAGE_SIZE, addr != end);
+        get_head_page_multiple(head, refs);
+
+        return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+                        int write, struct page **pages, int *nr)
+{
+        unsigned long next;
+        pud_t *pudp;
+
+        pudp = pud_offset(&pgd, addr);
+        do {
+                pud_t pud = *pudp;
+
+                next = pud_addr_end(addr, end);
+                if (pud_none(pud))
+                        return 0;
+                if (unlikely(pud_large(pud))) {
+                        if (!gup_huge_pud(pud, addr, next, write, pages, nr))
+                                return 0;
+                } else {
+                        if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+                                return 0;
+                }
+        } while (pudp++, addr = next, addr != end);
+
+        return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+                        struct page **pages)
+{
+        struct mm_struct *mm = current->mm;
+        unsigned long end = start + (nr_pages << PAGE_SHIFT);
+        unsigned long addr = start;
+        unsigned long next;
+        pgd_t *pgdp;
+        int nr = 0;
+
+        if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+                                        start, nr_pages*PAGE_SIZE)))
+                goto slow_irqon;
+
+        /*
+         * XXX: batch / limit 'nr', to avoid large irq off latency
+         * needs some instrumenting to determine the common sizes used by
+         * important workloads (eg. DB2), and whether limiting the batch size
+         * will decrease performance.
+         *
+         * It seems like we're in the clear for the moment. Direct-IO is
+         * the main guy that batches up lots of get_user_pages, and even
+         * they are limited to 64-at-a-time which is not so many.
+         */
+        /*
+         * This doesn't prevent pagetable teardown, but does prevent
+         * the pagetables and pages from being freed on x86.
+         *
+         * So long as we atomically load page table pointers versus teardown
+         * (which we do on x86, with the above PAE exception), we can follow the
+         * address down to the the page and take a ref on it.
+         */
+        local_irq_disable();
+        pgdp = pgd_offset(mm, addr);
+        do {
+                pgd_t pgd = *pgdp;
+
+                next = pgd_addr_end(addr, end);
+                if (pgd_none(pgd))
+                        goto slow;
+                if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+                        goto slow;
+        } while (pgdp++, addr = next, addr != end);
+        local_irq_enable();
+
+        VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+        return nr;
+
+        {
+                int ret;
+
+slow:
+                local_irq_enable();
+slow_irqon:
+                /* Try to get the remaining pages with get_user_pages */
+                start += nr << PAGE_SHIFT;
+                pages += nr;
+
+                down_read(&mm->mmap_sem);
+                ret = get_user_pages(current, mm, start,
+                        (end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+                up_read(&mm->mmap_sem);
+
+                /* Have to be a bit careful with return values */
+                if (nr > 0) {
+                        if (ret < 0)
+                                ret = nr;
+                        else
+                                ret += nr;
+                }
+
+                return ret;
+        }
+}
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 0b3d567e686d..8f307d914c2e 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -124,7 +124,8 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
         return 1;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+                        unsigned long addr, unsigned long sz)
 {
         pgd_t *pgd;
         pud_t *pud;
@@ -133,9 +134,14 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
         pgd = pgd_offset(mm, addr);
         pud = pud_alloc(mm, pgd, addr);
         if (pud) {
-                if (pud_none(*pud))
-                        huge_pmd_share(mm, addr, pud);
-                pte = (pte_t *) pmd_alloc(mm, pud, addr);
+                if (sz == PUD_SIZE) {
+                        pte = (pte_t *)pud;
+                } else {
+                        BUG_ON(sz != PMD_SIZE);
+                        if (pud_none(*pud))
+                                huge_pmd_share(mm, addr, pud);
+                        pte = (pte_t *) pmd_alloc(mm, pud, addr);
+                }
         }
         BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
 
@@ -151,8 +157,11 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
         pgd = pgd_offset(mm, addr);
         if (pgd_present(*pgd)) {
                 pud = pud_offset(pgd, addr);
-                if (pud_present(*pud))
+                if (pud_present(*pud)) {
+                        if (pud_large(*pud))
+                                return (pte_t *)pud;
                         pmd = pmd_offset(pud, addr);
+                }
         }
         return (pte_t *) pmd;
 }
@@ -188,6 +197,11 @@ int pmd_huge(pmd_t pmd)
         return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+        return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
                 pmd_t *pmd, int write)
@@ -208,6 +222,11 @@ int pmd_huge(pmd_t pmd)
         return !!(pmd_val(pmd) & _PAGE_PSE);
 }
 
+int pud_huge(pud_t pud)
+{
+        return !!(pud_val(pud) & _PAGE_PSE);
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
                 pmd_t *pmd, int write)
@@ -216,9 +235,22 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 
         page = pte_page(*(pte_t *)pmd);
         if (page)
-                page += ((address & ~HPAGE_MASK) >> PAGE_SHIFT);
+                page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
+        return page;
+}
+
+struct page *
+follow_huge_pud(struct mm_struct *mm, unsigned long address,
+                pud_t *pud, int write)
+{
+        struct page *page;
+
+        page = pte_page(*(pte_t *)pud);
+        if (page)
+                page += ((address & ~PUD_MASK) >> PAGE_SHIFT);
         return page;
 }
+
 #endif
 
 /* x86_64 also uses this file */
@@ -228,6 +260,7 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
                 unsigned long addr, unsigned long len,
                 unsigned long pgoff, unsigned long flags)
 {
+        struct hstate *h = hstate_file(file);
         struct mm_struct *mm = current->mm;
         struct vm_area_struct *vma;
         unsigned long start_addr;
@@ -240,7 +273,7 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
         }
 
 full_search:
-        addr = ALIGN(start_addr, HPAGE_SIZE);
+        addr = ALIGN(start_addr, huge_page_size(h));
 
         for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
                 /* At this point:  (!vma || addr < vma->vm_end). */
@@ -262,7 +295,7 @@ full_search:
                 }
                 if (addr + mm->cached_hole_size < vma->vm_start)
                         mm->cached_hole_size = vma->vm_start - addr;
-                addr = ALIGN(vma->vm_end, HPAGE_SIZE);
+                addr = ALIGN(vma->vm_end, huge_page_size(h));
         }
 }
 
@@ -270,6 +303,7 @@ static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
                 unsigned long addr0, unsigned long len,
                 unsigned long pgoff, unsigned long flags)
 {
+        struct hstate *h = hstate_file(file);
         struct mm_struct *mm = current->mm;
         struct vm_area_struct *vma, *prev_vma;
         unsigned long base = mm->mmap_base, addr = addr0;
@@ -290,7 +324,7 @@ try_again:
                 goto fail;
 
         /* either no address requested or cant fit in requested address hole */
-        addr = (mm->free_area_cache - len) & HPAGE_MASK;
+        addr = (mm->free_area_cache - len) & huge_page_mask(h);
         do {
                 /*
                  * Lookup failure means no vma is above this address,
@@ -321,7 +355,7 @@ try_again:
                         largest_hole = vma->vm_start - addr;
 
                 /* try just below the current vma->vm_start */
-                addr = (vma->vm_start - len) & HPAGE_MASK;
+                addr = (vma->vm_start - len) & huge_page_mask(h);
         } while (len <= vma->vm_start);
 
 fail:
@@ -359,22 +393,23 @@ unsigned long
 hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
                 unsigned long len, unsigned long pgoff, unsigned long flags)
 {
+        struct hstate *h = hstate_file(file);
         struct mm_struct *mm = current->mm;
         struct vm_area_struct *vma;
 
-        if (len & ~HPAGE_MASK)
+        if (len & ~huge_page_mask(h))
                 return -EINVAL;
         if (len > TASK_SIZE)
                 return -ENOMEM;
 
         if (flags & MAP_FIXED) {
-                if (prepare_hugepage_range(addr, len))
+                if (prepare_hugepage_range(file, addr, len))
                         return -EINVAL;
                 return addr;
         }
 
         if (addr) {
-                addr = ALIGN(addr, HPAGE_SIZE);
+                addr = ALIGN(addr, huge_page_size(h));
                 vma = find_vma(mm, addr);
                 if (TASK_SIZE - len >= addr &&
                     (!vma || addr + len <= vma->vm_start))
@@ -390,3 +425,20 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 
 #endif /*HAVE_ARCH_HUGETLB_UNMAPPED_AREA*/
 
+#ifdef CONFIG_X86_64
+static __init int setup_hugepagesz(char *opt)
+{
+        unsigned long ps = memparse(opt, &opt);
+        if (ps == PMD_SIZE) {
+                hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
+        } else if (ps == PUD_SIZE && cpu_has_gbpages) {
+                hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
+        } else {
+                printk(KERN_ERR "hugepagesz: Unsupported page size %lu M\n",
+                        ps >> 20);
+                return 0;
+        }
+        return 1;
+}
+__setup("hugepagesz=", setup_hugepagesz);
+#endif
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 9689a5138e64..d37f29376b0c 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -844,6 +844,9 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
                 reserve_early(table_start << PAGE_SHIFT,
                                  table_end << PAGE_SHIFT, "PGTABLE");
 
+        if (!after_init_bootmem)
+                early_memtest(start, end);
+
         return end >> PAGE_SHIFT;
 }
 
@@ -868,8 +871,6 @@ void __init paging_init(void)
          */
         sparse_init();
         zone_sizes_init();
-
-        paravirt_post_allocator_init();
 }
 
 /*
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 306049edd553..129618ca0ea2 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -86,43 +86,6 @@ early_param("gbpages", parse_direct_gbpages_on);
  * around without checking the pgd every time.
  */
 
-void show_mem(void)
-{
-        long i, total = 0, reserved = 0;
-        long shared = 0, cached = 0;
-        struct page *page;
-        pg_data_t *pgdat;
-
-        printk(KERN_INFO "Mem-info:\n");
-        show_free_areas();
-        for_each_online_pgdat(pgdat) {
-                for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-                        /*
-                         * This loop can take a while with 256 GB and
-                         * 4k pages so defer the NMI watchdog:
-                         */
-                        if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-                                touch_nmi_watchdog();
-
-                        if (!pfn_valid(pgdat->node_start_pfn + i))
-                                continue;
-
-                        page = pfn_to_page(pgdat->node_start_pfn + i);
-                        total++;
-                        if (PageReserved(page))
-                                reserved++;
-                        else if (PageSwapCache(page))
-                                cached++;
-                        else if (page_count(page))
-                                shared += page_count(page) - 1;
-                }
-        }
-        printk(KERN_INFO "%lu pages of RAM\n",          total);
-        printk(KERN_INFO "%lu reserved pages\n",        reserved);
-        printk(KERN_INFO "%lu pages shared\n",          shared);
-        printk(KERN_INFO "%lu pages swap cached\n",     cached);
-}
-
 int after_bootmem;
 
 static __init void *spp_getpage(void)
@@ -517,118 +480,6 @@ static void __init init_gbpages(void)
                 direct_gbpages = 0;
 }
 
-#ifdef CONFIG_MEMTEST
-
-static void __init memtest(unsigned long start_phys, unsigned long size,
-                                 unsigned pattern)
-{
-        unsigned long i;
-        unsigned long *start;
-        unsigned long start_bad;
-        unsigned long last_bad;
-        unsigned long val;
-        unsigned long start_phys_aligned;
-        unsigned long count;
-        unsigned long incr;
-
-        switch (pattern) {
-        case 0:
-                val = 0UL;
-                break;
-        case 1:
-                val = -1UL;
-                break;
-        case 2:
-                val = 0x5555555555555555UL;
-                break;
-        case 3:
-                val = 0xaaaaaaaaaaaaaaaaUL;
-                break;
-        default:
-                return;
-        }
-
-        incr = sizeof(unsigned long);
-        start_phys_aligned = ALIGN(start_phys, incr);
-        count = (size - (start_phys_aligned - start_phys))/incr;
-        start = __va(start_phys_aligned);
-        start_bad = 0;
-        last_bad = 0;
-
-        for (i = 0; i < count; i++)
-                start[i] = val;
-        for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
-                if (*start != val) {
-                        if (start_phys_aligned == last_bad + incr) {
-                                last_bad += incr;
-                        } else {
-                                if (start_bad) {
-                                        printk(KERN_CONT "\n  %016lx bad mem addr %016lx - %016lx reserved",
-                                                val, start_bad, last_bad + incr);
-                                        reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
-                                }
-                                start_bad = last_bad = start_phys_aligned;
-                        }
-                }
-        }
-        if (start_bad) {
-                printk(KERN_CONT "\n  %016lx bad mem addr %016lx - %016lx reserved",
-                        val, start_bad, last_bad + incr);
-                reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
-        }
-
-}
-
-/* default is disabled */
-static int memtest_pattern __initdata;
-
-static int __init parse_memtest(char *arg)
-{
-        if (arg)
-                memtest_pattern = simple_strtoul(arg, NULL, 0);
-        return 0;
-}
-
-early_param("memtest", parse_memtest);
-
-static void __init early_memtest(unsigned long start, unsigned long end)
-{
-        u64 t_start, t_size;
-        unsigned pattern;
-
-        if (!memtest_pattern)
-                return;
-
-        printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
-        for (pattern = 0; pattern < memtest_pattern; pattern++) {
-                t_start = start;
-                t_size = 0;
-                while (t_start < end) {
-                        t_start = find_e820_area_size(t_start, &t_size, 1);
-
-                        /* done ? */
-                        if (t_start >= end)
-                                break;
-                        if (t_start + t_size > end)
-                                t_size = end - t_start;
-
-                        printk(KERN_CONT "\n  %016llx - %016llx pattern %d",
-                                (unsigned long long)t_start,
-                                (unsigned long long)t_start + t_size, pattern);
-
-                        memtest(t_start, t_size, pattern);
-
-                        t_start += t_size;
-                }
-        }
-        printk(KERN_CONT "\n");
-}
-#else
-static void __init early_memtest(unsigned long start, unsigned long end)
-{
-}
-#endif
-
 static unsigned long __init kernel_physical_mapping_init(unsigned long start,
                                                 unsigned long end,
                                                 unsigned long page_size_mask)
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 24c1d3c30186..016f335bbeea 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -330,6 +330,14 @@ static void __iomem *ioremap_default(resource_size_t phys_addr,
         return (void __iomem *)ret;
 }
 
+void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
+                                unsigned long prot_val)
+{
+        return __ioremap_caller(phys_addr, size, (prot_val & _PAGE_CACHE_MASK),
+                                __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_prot);
+
 /**
  * iounmap - Free a IO remapping
  * @addr: virtual address from ioremap_*
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
new file mode 100644
index 000000000000..672e17f8262a
--- /dev/null
+++ b/arch/x86/mm/memtest.c
@@ -0,0 +1,123 @@
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/pfn.h>
+
+#include <asm/e820.h>
+
+static void __init memtest(unsigned long start_phys, unsigned long size,
+                                 unsigned pattern)
+{
+        unsigned long i;
+        unsigned long *start;
+        unsigned long start_bad;
+        unsigned long last_bad;
+        unsigned long val;
+        unsigned long start_phys_aligned;
+        unsigned long count;
+        unsigned long incr;
+
+        switch (pattern) {
+        case 0:
+                val = 0UL;
+                break;
+        case 1:
+                val = -1UL;
+                break;
+        case 2:
+#ifdef CONFIG_X86_64
+                val = 0x5555555555555555UL;
+#else
+                val = 0x55555555UL;
+#endif
+                break;
+        case 3:
+#ifdef CONFIG_X86_64
+                val = 0xaaaaaaaaaaaaaaaaUL;
+#else
+                val = 0xaaaaaaaaUL;
+#endif
+                break;
+        default:
+                return;
+        }
+
+        incr = sizeof(unsigned long);
+        start_phys_aligned = ALIGN(start_phys, incr);
+        count = (size - (start_phys_aligned - start_phys))/incr;
+        start = __va(start_phys_aligned);
+        start_bad = 0;
+        last_bad = 0;
+
+        for (i = 0; i < count; i++)
+                start[i] = val;
+        for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
+                if (*start != val) {
+                        if (start_phys_aligned == last_bad + incr) {
+                                last_bad += incr;
+                        } else {
+                                if (start_bad) {
+                                        printk(KERN_CONT "\n  %010lx bad mem addr %010lx - %010lx reserved",
+                                                val, start_bad, last_bad + incr);
+                                        reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+                                }
+                                start_bad = last_bad = start_phys_aligned;
+                        }
+                }
+        }
+        if (start_bad) {
+                printk(KERN_CONT "\n  %016lx bad mem addr %010lx - %010lx reserved",
+                        val, start_bad, last_bad + incr);
+                reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+        }
+
+}
+
+/* default is disabled */
+static int memtest_pattern __initdata;
+
+static int __init parse_memtest(char *arg)
+{
+        if (arg)
+                memtest_pattern = simple_strtoul(arg, NULL, 0);
+        return 0;
+}
+
+early_param("memtest", parse_memtest);
+
+void __init early_memtest(unsigned long start, unsigned long end)
+{
+        u64 t_start, t_size;
+        unsigned pattern;
+
+        if (!memtest_pattern)
+                return;
+
+        printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
+        for (pattern = 0; pattern < memtest_pattern; pattern++) {
+                t_start = start;
+                t_size = 0;
+                while (t_start < end) {
+                        t_start = find_e820_area_size(t_start, &t_size, 1);
+
+                        /* done ? */
+                        if (t_start >= end)
+                                break;
+                        if (t_start + t_size > end)
+                                t_size = end - t_start;
+
+                        printk(KERN_CONT "\n  %010llx - %010llx pattern %d",
+                                (unsigned long long)t_start,
+                                (unsigned long long)t_start + t_size, pattern);
+
+                        memtest(t_start, t_size, pattern);
+
+                        t_start += t_size;
+                }
+        }
+        printk(KERN_CONT "\n");
+}
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index b432d5781773..a4dd793d6003 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -20,15 +20,9 @@
 #include <asm/acpi.h>
 #include <asm/k8.h>
 
-#ifndef Dprintk
-#define Dprintk(x...)
-#endif
-
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
-
 struct memnode memnode;
 
 s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
@@ -202,7 +196,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
                 nodedata_phys + pgdat_size - 1);
 
         memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
-        NODE_DATA(nodeid)->bdata = &plat_node_bdata[nodeid];
+        NODE_DATA(nodeid)->bdata = &bootmem_node_data[nodeid];
         NODE_DATA(nodeid)->node_start_pfn = start_pfn;
         NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn;
 
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index d4585077977a..2fe30916d4b6 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -12,6 +12,8 @@
 #include <linux/gfp.h>
 #include <linux/fs.h>
 #include <linux/bootmem.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 
 #include <asm/msr.h>
 #include <asm/tlbflush.h>
@@ -373,8 +375,8 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
         return vma_prot;
 }
 
-#ifdef CONFIG_NONPROMISC_DEVMEM
-/* This check is done in drivers/char/mem.c in case of NONPROMISC_DEVMEM*/
+#ifdef CONFIG_STRICT_DEVMEM
+/* This check is done in drivers/char/mem.c in case of STRICT_DEVMEM*/
 static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 {
         return 1;
@@ -398,7 +400,7 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
         }
         return 1;
 }
-#endif /* CONFIG_NONPROMISC_DEVMEM */
+#endif /* CONFIG_STRICT_DEVMEM */
 
 int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
                                 unsigned long size, pgprot_t *vma_prot)
@@ -489,3 +491,89 @@ void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
 
         free_memtype(addr, addr + size);
 }
+
+#if defined(CONFIG_DEBUG_FS)
+
+/* get Nth element of the linked list */
+static struct memtype *memtype_get_idx(loff_t pos)
+{
+        struct memtype *list_node, *print_entry;
+        int i = 1;
+
+        print_entry  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+        if (!print_entry)
+                return NULL;
+
+        spin_lock(&memtype_lock);
+        list_for_each_entry(list_node, &memtype_list, nd) {
+                if (pos == i) {
+                        *print_entry = *list_node;
+                        spin_unlock(&memtype_lock);
+                        return print_entry;
+                }
+                ++i;
+        }
+        spin_unlock(&memtype_lock);
+        kfree(print_entry);
+        return NULL;
+}
+
+static void *memtype_seq_start(struct seq_file *seq, loff_t *pos)
+{
+        if (*pos == 0) {
+                ++*pos;
+                seq_printf(seq, "PAT memtype list:\n");
+        }
+
+        return memtype_get_idx(*pos);
+}
+
+static void *memtype_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+        ++*pos;
+        return memtype_get_idx(*pos);
+}
+
+static void memtype_seq_stop(struct seq_file *seq, void *v)
+{
+}
+
+static int memtype_seq_show(struct seq_file *seq, void *v)
+{
+        struct memtype *print_entry = (struct memtype *)v;
+
+        seq_printf(seq, "%s @ 0x%Lx-0x%Lx\n", cattr_name(print_entry->type),
+                        print_entry->start, print_entry->end);
+        kfree(print_entry);
+        return 0;
+}
+
+static struct seq_operations memtype_seq_ops = {
+        .start = memtype_seq_start,
+        .next  = memtype_seq_next,
+        .stop  = memtype_seq_stop,
+        .show  = memtype_seq_show,
+};
+
+static int memtype_seq_open(struct inode *inode, struct file *file)
+{
+        return seq_open(file, &memtype_seq_ops);
+}
+
+static const struct file_operations memtype_fops = {
+        .open    = memtype_seq_open,
+        .read    = seq_read,
+        .llseek  = seq_lseek,
+        .release = seq_release,
+};
+
+static int __init pat_memtype_list_init(void)
+{
+        debugfs_create_file("pat_memtype_list", S_IRUSR, arch_debugfs_dir,
+                                NULL, &memtype_fops);
+        return 0;
+}
+
+late_initcall(pat_memtype_list_init);
+
+#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index b4becbf8c570..cab0abbd1ebe 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -20,53 +20,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-        int total = 0, reserved = 0;
-        int shared = 0, cached = 0;
-        int highmem = 0;
-        struct page *page;
-        pg_data_t *pgdat;
-        unsigned long i;
-        unsigned long flags;
-
-        printk(KERN_INFO "Mem-info:\n");
-        show_free_areas();
-        for_each_online_pgdat(pgdat) {
-                pgdat_resize_lock(pgdat, &flags);
-                for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-                        if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-                                touch_nmi_watchdog();
-                        page = pgdat_page_nr(pgdat, i);
-                        total++;
-                        if (PageHighMem(page))
-                                highmem++;
-                        if (PageReserved(page))
-                                reserved++;
-                        else if (PageSwapCache(page))
-                                cached++;
-                        else if (page_count(page))
-                                shared += page_count(page) - 1;
-                }
-                pgdat_resize_unlock(pgdat, &flags);
-        }
-        printk(KERN_INFO "%d pages of RAM\n", total);
-        printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
-        printk(KERN_INFO "%d reserved pages\n", reserved);
-        printk(KERN_INFO "%d pages shared\n", shared);
-        printk(KERN_INFO "%d pages swap cached\n", cached);
-
-        printk(KERN_INFO "%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
-        printk(KERN_INFO "%lu pages writeback\n",
-                                        global_page_state(NR_WRITEBACK));
-        printk(KERN_INFO "%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
-        printk(KERN_INFO "%lu pages slab\n",
-                global_page_state(NR_SLAB_RECLAIMABLE) +
-                global_page_state(NR_SLAB_UNRECLAIMABLE));
-        printk(KERN_INFO "%lu pages pagetables\n",
-                                        global_page_state(NR_PAGETABLE));
-}
-
 /*
  * Associate a virtual page frame with a given physical page frame 
  * and protection flags for that frame.
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 7f3329b55d2e..3f90289410e6 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -369,20 +369,34 @@ static int __init ppro_init(char **cpu_type)
 {
         __u8 cpu_model = boot_cpu_data.x86_model;
 
-        if (cpu_model == 14)
+        switch (cpu_model) {
+        case 0 ... 2:
+                *cpu_type = "i386/ppro";
+                break;
+        case 3 ... 5:
+                *cpu_type = "i386/pii";
+                break;
+        case 6 ... 8:
+                *cpu_type = "i386/piii";
+                break;
+        case 9:
+                *cpu_type = "i386/p6_mobile";
+                break;
+        case 10 ... 13:
+                *cpu_type = "i386/p6";
+                break;
+        case 14:
                 *cpu_type = "i386/core";
-        else if (cpu_model == 15 || cpu_model == 23)
+                break;
+        case 15: case 23:
+                *cpu_type = "i386/core_2";
+                break;
+        case 26:
                 *cpu_type = "i386/core_2";
-        else if (cpu_model > 0xd)
+                break;
+        default:
+                /* Unknown */
                 return 0;
-        else if (cpu_model == 9) {
-                *cpu_type = "i386/p6_mobile";
-        } else if (cpu_model > 5) {
-                *cpu_type = "i386/piii";
-        } else if (cpu_model > 2) {
-                *cpu_type = "i386/pii";
-        } else {
-                *cpu_type = "i386/ppro";
         }
 
         model = &op_ppro_spec;
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index e515e8db842a..d49202e740ea 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -5,13 +5,13 @@ obj-$(CONFIG_PCI_MMCONFIG)	+= mmconfig_$(BITS).o direct.o mmconfig-shared.o
 obj-$(CONFIG_PCI_DIRECT)        += direct.o
 obj-$(CONFIG_PCI_OLPC)          += olpc.o
 
-pci-y                           := fixup.o
-pci-$(CONFIG_ACPI)              += acpi.o
-pci-y                           += legacy.o irq.o
+obj-y                           += fixup.o
+obj-$(CONFIG_ACPI)              += acpi.o
+obj-y                           += legacy.o irq.o
 
-pci-$(CONFIG_X86_VISWS)         += visws.o
+obj-$(CONFIG_X86_VISWS)         += visws.o
 
-pci-$(CONFIG_X86_NUMAQ)         += numa.o
+obj-$(CONFIG_X86_NUMAQ)         += numaq_32.o
 
-obj-y                           += $(pci-y) common.o early.o
+obj-y                           += common.o early.o
 obj-y                           += amd_bus.o
diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
index 858dbe3399f9..86631ccbc25a 100644
--- a/arch/x86/pci/early.c
+++ b/arch/x86/pci/early.c
@@ -7,15 +7,13 @@
 /* Direct PCI access. This is used for PCI accesses in early boot before
    the PCI subsystem works. */
 
-#define PDprintk(x...)
-
 u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
 {
         u32 v;
         outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
         v = inl(0xcfc);
         if (v != 0xffffffff)
-                PDprintk("%x reading 4 from %x: %x\n", slot, offset, v);
+                pr_debug("%x reading 4 from %x: %x\n", slot, offset, v);
         return v;
 }
 
@@ -24,7 +22,7 @@ u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
         u8 v;
         outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
         v = inb(0xcfc + (offset&3));
-        PDprintk("%x reading 1 from %x: %x\n", slot, offset, v);
+        pr_debug("%x reading 1 from %x: %x\n", slot, offset, v);
         return v;
 }
 
@@ -33,28 +31,28 @@ u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
         u16 v;
         outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
         v = inw(0xcfc + (offset&2));
-        PDprintk("%x reading 2 from %x: %x\n", slot, offset, v);
+        pr_debug("%x reading 2 from %x: %x\n", slot, offset, v);
         return v;
 }
 
 void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
                                     u32 val)
 {
-        PDprintk("%x writing to %x: %x\n", slot, offset, val);
+        pr_debug("%x writing to %x: %x\n", slot, offset, val);
         outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
         outl(val, 0xcfc);
 }
 
 void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val)
 {
-        PDprintk("%x writing to %x: %x\n", slot, offset, val);
+        pr_debug("%x writing to %x: %x\n", slot, offset, val);
         outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
         outb(val, 0xcfc + (offset&3));
 }
 
 void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val)
 {
-        PDprintk("%x writing to %x: %x\n", slot, offset, val);
+        pr_debug("%x writing to %x: %x\n", slot, offset, val);
         outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
         outw(val, 0xcfc + (offset&2));
 }
@@ -71,7 +69,7 @@ void early_dump_pci_device(u8 bus, u8 slot, u8 func)
         int j;
         u32 val;
 
-        printk("PCI: %02x:%02x:%02x", bus, slot, func);
+        printk(KERN_INFO "PCI: %02x:%02x:%02x", bus, slot, func);
 
         for (i = 0; i < 256; i += 4) {
                 if (!(i & 0x0f))
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 2aafb67dc5f1..a09505806b82 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -280,6 +280,7 @@ static void pci_track_mmap_page_range(struct vm_area_struct *vma)
 static struct vm_operations_struct pci_mmap_ops = {
         .open  = pci_track_mmap_page_range,
         .close = pci_unmap_page_range,
+        .access = generic_access_phys,
 };
 
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index 132876cc6fca..ec9ce35e44d6 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -57,14 +57,17 @@ static int __init pci_legacy_init(void)
 
 int __init pci_subsys_init(void)
 {
+#ifdef CONFIG_X86_NUMAQ
+        pci_numaq_init();
+#endif
 #ifdef CONFIG_ACPI
         pci_acpi_init();
 #endif
+#ifdef CONFIG_X86_VISWS
+        pci_visws_init();
+#endif
         pci_legacy_init();
         pcibios_irq_init();
-#ifdef CONFIG_X86_NUMAQ
-        pci_numa_init();
-#endif
         pcibios_init();
 
         return 0;
diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numaq_32.c
index 8b5ca1966731..f4b16dc11dad 100644
--- a/arch/x86/pci/numa.c
+++ b/arch/x86/pci/numaq_32.c
@@ -1,5 +1,5 @@
 /*
- * numa.c - Low-level PCI access for NUMA-Q machines
+ * numaq_32.c - Low-level PCI access for NUMA-Q machines
  */
 
 #include <linux/pci.h>
@@ -151,7 +151,7 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
 
-int __init pci_numa_init(void)
+int __init pci_numaq_init(void)
 {
         int quad;
 
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index 3e25deb821ac..15b9cf6be729 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -108,7 +108,8 @@ extern void __init dmi_check_skip_isa_align(void);
 /* some common used subsys_initcalls */
 extern int __init pci_acpi_init(void);
 extern int __init pcibios_irq_init(void);
-extern int __init pci_numa_init(void);
+extern int __init pci_visws_init(void);
+extern int __init pci_numaq_init(void);
 extern int __init pcibios_init(void);
 
 /* pci-mmconfig.c */
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index 1a7bed492bb1..42f4cb19faca 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -86,8 +86,14 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
         pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
 }
 
-static int __init pci_visws_init(void)
+int __init pci_visws_init(void)
 {
+        if (!is_visws_box())
+                return -1;
+
+        pcibios_enable_irq = &pci_visws_enable_irq;
+        pcibios_disable_irq = &pci_visws_disable_irq;
+
         /* The VISWS supports configuration access type 1 only */
         pci_probe = (pci_probe | PCI_PROBE_CONF1) &
                     ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
@@ -105,18 +111,3 @@ static int __init pci_visws_init(void)
         pcibios_resource_survey();
         return 0;
 }
-
-static __init int pci_subsys_init(void)
-{
-        if (!is_visws_box())
-                return -1;
-
-        pcibios_enable_irq = &pci_visws_enable_irq;
-        pcibios_disable_irq = &pci_visws_disable_irq;
-
-        pci_visws_init();
-        pcibios_init();
-
-        return 0;
-}
-subsys_initcall(pci_subsys_init);
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index b7ad9f89d21f..4d6ef0a336d6 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -62,7 +62,7 @@ $(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE
 # Build multiple 32-bit vDSO images to choose from at boot time.
 #
 obj-$(VDSO32-y)                 += vdso32-syms.lds
-vdso32.so-$(CONFIG_X86_32)      += int80
+vdso32.so-$(VDSO32-y)           += int80
 vdso32.so-$(CONFIG_COMPAT)      += syscall
 vdso32.so-$(VDSO32-y)           += sysenter
 
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 0bce5429a515..513f330c5832 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -193,17 +193,12 @@ static __init void relocate_vdso(Elf32_Ehdr *ehdr)
         }
 }
 
-/*
- * These symbols are defined by vdso32.S to mark the bounds
- * of the ELF DSO images included therein.
- */
-extern const char vdso32_default_start, vdso32_default_end;
-extern const char vdso32_sysenter_start, vdso32_sysenter_end;
 static struct page *vdso32_pages[1];
 
 #ifdef CONFIG_X86_64
 
 #define vdso32_sysenter()       (boot_cpu_has(X86_FEATURE_SYSENTER32))
+#define vdso32_syscall()        (boot_cpu_has(X86_FEATURE_SYSCALL32))
 
 /* May not be __init: called during resume */
 void syscall32_cpu_init(void)
@@ -226,6 +221,7 @@ static inline void map_compat_vdso(int map)
 #else  /* CONFIG_X86_32 */
 
 #define vdso32_sysenter()       (boot_cpu_has(X86_FEATURE_SEP))
+#define vdso32_syscall()        (0)
 
 void enable_sep_cpu(void)
 {
@@ -296,12 +292,15 @@ int __init sysenter_setup(void)
         gate_vma_init();
 #endif
 
-        if (!vdso32_sysenter()) {
-                vsyscall = &vdso32_default_start;
-                vsyscall_len = &vdso32_default_end - &vdso32_default_start;
-        } else {
+        if (vdso32_syscall()) {
+                vsyscall = &vdso32_syscall_start;
+                vsyscall_len = &vdso32_syscall_end - &vdso32_syscall_start;
+        } else if (vdso32_sysenter()){
                 vsyscall = &vdso32_sysenter_start;
                 vsyscall_len = &vdso32_sysenter_end - &vdso32_sysenter_start;
+        } else {
+                vsyscall = &vdso32_int80_start;
+                vsyscall_len = &vdso32_int80_end - &vdso32_int80_start;
         }
 
         memcpy(syscall_page, vsyscall, vsyscall_len);
diff --git a/arch/x86/vdso/vdso32.S b/arch/x86/vdso/vdso32.S
index 1e36f72cab86..2ce5f82c333b 100644
--- a/arch/x86/vdso/vdso32.S
+++ b/arch/x86/vdso/vdso32.S
@@ -2,14 +2,17 @@
 
 __INITDATA
 
-        .globl vdso32_default_start, vdso32_default_end
-vdso32_default_start:
-#ifdef CONFIG_X86_32
+        .globl vdso32_int80_start, vdso32_int80_end
+vdso32_int80_start:
         .incbin "arch/x86/vdso/vdso32-int80.so"
-#else
+vdso32_int80_end:
+
+        .globl vdso32_syscall_start, vdso32_syscall_end
+vdso32_syscall_start:
+#ifdef CONFIG_COMPAT
         .incbin "arch/x86/vdso/vdso32-syscall.so"
 #endif
-vdso32_default_end:
+vdso32_syscall_end:
 
         .globl vdso32_sysenter_start, vdso32_sysenter_end
 vdso32_sysenter_start:
diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c
index 19a6cfaf5db9..257ba4a10abf 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
@@ -21,7 +21,8 @@ unsigned int __read_mostly vdso_enabled = 1;
 extern char vdso_start[], vdso_end[];
 extern unsigned short vdso_sync_cpuid;
 
-struct page **vdso_pages;
+static struct page **vdso_pages;
+static unsigned vdso_size;
 
 static inline void *var_ref(void *p, char *name)
 {
@@ -38,6 +39,7 @@ static int __init init_vdso_vars(void)
         int i;
         char *vbase;
 
+        vdso_size = npages << PAGE_SHIFT;
         vdso_pages = kmalloc(sizeof(struct page *) * npages, GFP_KERNEL);
         if (!vdso_pages)
                 goto oom;
@@ -101,20 +103,19 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int exstack)
         struct mm_struct *mm = current->mm;
         unsigned long addr;
         int ret;
-        unsigned len = round_up(vdso_end - vdso_start, PAGE_SIZE);
 
         if (!vdso_enabled)
                 return 0;
 
         down_write(&mm->mmap_sem);
-        addr = vdso_addr(mm->start_stack, len);
-        addr = get_unmapped_area(NULL, addr, len, 0, 0);
+        addr = vdso_addr(mm->start_stack, vdso_size);
+        addr = get_unmapped_area(NULL, addr, vdso_size, 0, 0);
         if (IS_ERR_VALUE(addr)) {
                 ret = addr;
                 goto up_fail;
         }
 
-        ret = install_special_mapping(mm, addr, len,
+        ret = install_special_mapping(mm, addr, vdso_size,
                                       VM_READ|VM_EXEC|
                                       VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
                                       VM_ALWAYSDUMP,
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index c2cc99580871..3815e425f470 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -6,8 +6,8 @@ config XEN
         bool "Xen guest support"
         select PARAVIRT
         select PARAVIRT_CLOCK
-        depends on X86_32
-        depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER)
+        depends on X86_64 || (X86_32 && X86_PAE && !(X86_VISWS || X86_VOYAGER))
+        depends on X86_CMPXCHG && X86_TSC
         help
           This is the Linux Xen port.  Enabling this will allow the
           kernel to boot in a paravirtualized environment under the
@@ -15,10 +15,16 @@ config XEN
 
 config XEN_MAX_DOMAIN_MEMORY
        int "Maximum allowed size of a domain in gigabytes"
-       default 8
+       default 8 if X86_32
+       default 32 if X86_64
        depends on XEN
        help
          The pseudo-physical to machine address array is sized
          according to the maximum possible memory size of a Xen
          domain.  This array uses 1 page per gigabyte, so there's no
-         need to be too stingy here.
\ No newline at end of file
+         need to be too stingy here.
+
+config XEN_SAVE_RESTORE
+       bool
+       depends on PM
+       default y
\ No newline at end of file
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 2ba2d1649131..59c1e539aed2 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -1,4 +1,4 @@
 obj-y           := enlighten.o setup.o multicalls.o mmu.o \
-                        time.o xen-asm.o grant-table.o suspend.o
+                        time.o xen-asm_$(BITS).o grant-table.o suspend.o
 
 obj-$(CONFIG_SMP)       += smp.o
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bb508456ef52..9ff6e3cbf08f 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -33,6 +33,7 @@
 #include <xen/interface/sched.h>
 #include <xen/features.h>
 #include <xen/page.h>
+#include <xen/hvc-console.h>
 
 #include <asm/paravirt.h>
 #include <asm/page.h>
@@ -40,12 +41,12 @@
 #include <asm/xen/hypervisor.h>
 #include <asm/fixmap.h>
 #include <asm/processor.h>
+#include <asm/msr-index.h>
 #include <asm/setup.h>
 #include <asm/desc.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/reboot.h>
-#include <asm/pgalloc.h>
 
 #include "xen-ops.h"
 #include "mmu.h"
@@ -57,6 +58,18 @@ DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
 DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 
 /*
+ * Identity map, in addition to plain kernel map.  This needs to be
+ * large enough to allocate page table pages to allocate the rest.
+ * Each page can map 2MB.
+ */
+static pte_t level1_ident_pgt[PTRS_PER_PTE * 4] __page_aligned_bss;
+
+#ifdef CONFIG_X86_64
+/* l3 pud for userspace vsyscall mapping */
+static pud_t level3_user_vsyscall[PTRS_PER_PUD] __page_aligned_bss;
+#endif /* CONFIG_X86_64 */
+
+/*
  * Note about cr3 (pagetable base) values:
  *
  * xen_cr3 contains the current logical cr3 value; it contains the
@@ -167,10 +180,14 @@ void xen_vcpu_restore(void)
 
 static void __init xen_banner(void)
 {
+        unsigned version = HYPERVISOR_xen_version(XENVER_version, NULL);
+        struct xen_extraversion extra;
+        HYPERVISOR_xen_version(XENVER_extraversion, &extra);
+
         printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
                pv_info.name);
-        printk(KERN_INFO "Hypervisor signature: %s%s\n",
-               xen_start_info->magic,
+        printk(KERN_INFO "Xen version: %d.%d%s%s\n",
+               version >> 16, version & 0xffff, extra.extraversion,
                xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
@@ -363,14 +380,6 @@ static void load_TLS_descriptor(struct thread_struct *t,
 
 static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 {
-        xen_mc_batch();
-
-        load_TLS_descriptor(t, cpu, 0);
-        load_TLS_descriptor(t, cpu, 1);
-        load_TLS_descriptor(t, cpu, 2);
-
-        xen_mc_issue(PARAVIRT_LAZY_CPU);
-
         /*
          * XXX sleazy hack: If we're being called in a lazy-cpu zone,
          * it means we're in a context switch, and %gs has just been
@@ -379,10 +388,39 @@ static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
          * Either way, it has been saved, and the new value will get
          * loaded properly.  This will go away as soon as Xen has been
          * modified to not save/restore %gs for normal hypercalls.
+         *
+         * On x86_64, this hack is not used for %gs, because gs points
+         * to KERNEL_GS_BASE (and uses it for PDA references), so we
+         * must not zero %gs on x86_64
+         *
+         * For x86_64, we need to zero %fs, otherwise we may get an
+         * exception between the new %fs descriptor being loaded and
+         * %fs being effectively cleared at __switch_to().
          */
-        if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)
+        if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
+#ifdef CONFIG_X86_32
                 loadsegment(gs, 0);
+#else
+                loadsegment(fs, 0);
+#endif
+        }
+
+        xen_mc_batch();
+
+        load_TLS_descriptor(t, cpu, 0);
+        load_TLS_descriptor(t, cpu, 1);
+        load_TLS_descriptor(t, cpu, 2);
+
+        xen_mc_issue(PARAVIRT_LAZY_CPU);
+}
+
+#ifdef CONFIG_X86_64
+static void xen_load_gs_index(unsigned int idx)
+{
+        if (HYPERVISOR_set_segment_base(SEGBASE_GS_USER_SEL, idx))
+                BUG();
 }
+#endif
 
 static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
                                 const void *ptr)
@@ -400,23 +438,18 @@ static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
         preempt_enable();
 }
 
-static int cvt_gate_to_trap(int vector, u32 low, u32 high,
+static int cvt_gate_to_trap(int vector, const gate_desc *val,
                             struct trap_info *info)
 {
-        u8 type, dpl;
-
-        type = (high >> 8) & 0x1f;
-        dpl = (high >> 13) & 3;
-
-        if (type != 0xf && type != 0xe)
+        if (val->type != 0xf && val->type != 0xe)
                 return 0;
 
         info->vector = vector;
-        info->address = (high & 0xffff0000) | (low & 0x0000ffff);
-        info->cs = low >> 16;
-        info->flags = dpl;
+        info->address = gate_offset(*val);
+        info->cs = gate_segment(*val);
+        info->flags = val->dpl;
         /* interrupt gates clear IF */
-        if (type == 0xe)
+        if (val->type == 0xe)
                 info->flags |= 4;
 
         return 1;
@@ -443,11 +476,10 @@ static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g)
 
         if (p >= start && (p + 8) <= end) {
                 struct trap_info info[2];
-                u32 *desc = (u32 *)g;
 
                 info[1].address = 0;
 
-                if (cvt_gate_to_trap(entrynum, desc[0], desc[1], &info[0]))
+                if (cvt_gate_to_trap(entrynum, g, &info[0]))
                         if (HYPERVISOR_set_trap_table(info))
                                 BUG();
         }
@@ -460,13 +492,13 @@ static void xen_convert_trap_info(const struct desc_ptr *desc,
 {
         unsigned in, out, count;
 
-        count = (desc->size+1) / 8;
+        count = (desc->size+1) / sizeof(gate_desc);
         BUG_ON(count > 256);
 
         for (in = out = 0; in < count; in++) {
-                const u32 *entry = (u32 *)(desc->address + in * 8);
+                gate_desc *entry = (gate_desc*)(desc->address) + in;
 
-                if (cvt_gate_to_trap(in, entry[0], entry[1], &traps[out]))
+                if (cvt_gate_to_trap(in, entry, &traps[out]))
                         out++;
         }
         traps[out].address = 0;
@@ -695,33 +727,89 @@ static void set_current_cr3(void *v)
         x86_write_percpu(xen_current_cr3, (unsigned long)v);
 }
 
-static void xen_write_cr3(unsigned long cr3)
+static void __xen_write_cr3(bool kernel, unsigned long cr3)
 {
         struct mmuext_op *op;
         struct multicall_space mcs;
-        unsigned long mfn = pfn_to_mfn(PFN_DOWN(cr3));
+        unsigned long mfn;
 
-        BUG_ON(preemptible());
+        if (cr3)
+                mfn = pfn_to_mfn(PFN_DOWN(cr3));
+        else
+                mfn = 0;
 
-        mcs = xen_mc_entry(sizeof(*op));  /* disables interrupts */
+        WARN_ON(mfn == 0 && kernel);
 
-        /* Update while interrupts are disabled, so its atomic with
-           respect to ipis */
-        x86_write_percpu(xen_cr3, cr3);
+        mcs = __xen_mc_entry(sizeof(*op));
 
         op = mcs.args;
-        op->cmd = MMUEXT_NEW_BASEPTR;
+        op->cmd = kernel ? MMUEXT_NEW_BASEPTR : MMUEXT_NEW_USER_BASEPTR;
         op->arg1.mfn = mfn;
 
         MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
 
-        /* Update xen_update_cr3 once the batch has actually
-           been submitted. */
-        xen_mc_callback(set_current_cr3, (void *)cr3);
+        if (kernel) {
+                x86_write_percpu(xen_cr3, cr3);
+
+                /* Update xen_current_cr3 once the batch has actually
+                   been submitted. */
+                xen_mc_callback(set_current_cr3, (void *)cr3);
+        }
+}
+
+static void xen_write_cr3(unsigned long cr3)
+{
+        BUG_ON(preemptible());
+
+        xen_mc_batch();  /* disables interrupts */
+
+        /* Update while interrupts are disabled, so its atomic with
+           respect to ipis */
+        x86_write_percpu(xen_cr3, cr3);
+
+        __xen_write_cr3(true, cr3);
+
+#ifdef CONFIG_X86_64
+        {
+                pgd_t *user_pgd = xen_get_user_pgd(__va(cr3));
+                if (user_pgd)
+                        __xen_write_cr3(false, __pa(user_pgd));
+                else
+                        __xen_write_cr3(false, 0);
+        }
+#endif
 
         xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
 }
 
+static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
+{
+        int ret;
+
+        ret = 0;
+
+        switch(msr) {
+#ifdef CONFIG_X86_64
+                unsigned which;
+                u64 base;
+
+        case MSR_FS_BASE:               which = SEGBASE_FS; goto set;
+        case MSR_KERNEL_GS_BASE:        which = SEGBASE_GS_USER; goto set;
+        case MSR_GS_BASE:               which = SEGBASE_GS_KERNEL; goto set;
+
+        set:
+                base = ((u64)high << 32) | low;
+                if (HYPERVISOR_set_segment_base(which, base) != 0)
+                        ret = -EFAULT;
+                break;
+#endif
+        default:
+                ret = native_write_msr_safe(msr, low, high);
+        }
+
+        return ret;
+}
+
 /* Early in boot, while setting up the initial pagetable, assume
    everything is pinned. */
 static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn)
@@ -778,6 +866,48 @@ static void xen_alloc_pmd(struct mm_struct *mm, u32 pfn)
         xen_alloc_ptpage(mm, pfn, PT_PMD);
 }
 
+static int xen_pgd_alloc(struct mm_struct *mm)
+{
+        pgd_t *pgd = mm->pgd;
+        int ret = 0;
+
+        BUG_ON(PagePinned(virt_to_page(pgd)));
+
+#ifdef CONFIG_X86_64
+        {
+                struct page *page = virt_to_page(pgd);
+                pgd_t *user_pgd;
+
+                BUG_ON(page->private != 0);
+
+                ret = -ENOMEM;
+
+                user_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+                page->private = (unsigned long)user_pgd;
+
+                if (user_pgd != NULL) {
+                        user_pgd[pgd_index(VSYSCALL_START)] =
+                                __pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE);
+                        ret = 0;
+                }
+
+                BUG_ON(PagePinned(virt_to_page(xen_get_user_pgd(pgd))));
+        }
+#endif
+
+        return ret;
+}
+
+static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+#ifdef CONFIG_X86_64
+        pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+        if (user_pgd)
+                free_page((unsigned long)user_pgd);
+#endif
+}
+
 /* This should never happen until we're OK to use struct page */
 static void xen_release_ptpage(u32 pfn, unsigned level)
 {
@@ -803,6 +933,18 @@ static void xen_release_pmd(u32 pfn)
         xen_release_ptpage(pfn, PT_PMD);
 }
 
+#if PAGETABLE_LEVELS == 4
+static void xen_alloc_pud(struct mm_struct *mm, u32 pfn)
+{
+        xen_alloc_ptpage(mm, pfn, PT_PUD);
+}
+
+static void xen_release_pud(u32 pfn)
+{
+        xen_release_ptpage(pfn, PT_PUD);
+}
+#endif
+
 #ifdef CONFIG_HIGHPTE
 static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
 {
@@ -841,68 +983,16 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
 
 static __init void xen_pagetable_setup_start(pgd_t *base)
 {
-        pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base;
-        int i;
-
-        /* special set_pte for pagetable initialization */
-        pv_mmu_ops.set_pte = xen_set_pte_init;
-
-        init_mm.pgd = base;
-        /*
-         * copy top-level of Xen-supplied pagetable into place.  This
-         * is a stand-in while we copy the pmd pages.
-         */
-        memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t));
-
-        /*
-         * For PAE, need to allocate new pmds, rather than
-         * share Xen's, since Xen doesn't like pmd's being
-         * shared between address spaces.
-         */
-        for (i = 0; i < PTRS_PER_PGD; i++) {
-                if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
-                        pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
-
-                        memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
-                               PAGE_SIZE);
-
-                        make_lowmem_page_readonly(pmd);
-
-                        set_pgd(&base[i], __pgd(1 + __pa(pmd)));
-                } else
-                        pgd_clear(&base[i]);
-        }
-
-        /* make sure zero_page is mapped RO so we can use it in pagetables */
-        make_lowmem_page_readonly(empty_zero_page);
-        make_lowmem_page_readonly(base);
-        /*
-         * Switch to new pagetable.  This is done before
-         * pagetable_init has done anything so that the new pages
-         * added to the table can be prepared properly for Xen.
-         */
-        xen_write_cr3(__pa(base));
-
-        /* Unpin initial Xen pagetable */
-        pin_pagetable_pfn(MMUEXT_UNPIN_TABLE,
-                          PFN_DOWN(__pa(xen_start_info->pt_base)));
 }
 
 void xen_setup_shared_info(void)
 {
         if (!xen_feature(XENFEAT_auto_translated_physmap)) {
-                unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
-                /*
-                 * Create a mapping for the shared info page.
-                 * Should be set_fixmap(), but shared_info is a machine
-                 * address with no corresponding pseudo-phys address.
-                 */
-                set_pte_mfn(addr,
-                            PFN_DOWN(xen_start_info->shared_info),
-                            PAGE_KERNEL);
-
-                HYPERVISOR_shared_info = (struct shared_info *)addr;
+                set_fixmap(FIX_PARAVIRT_BOOTMAP,
+                           xen_start_info->shared_info);
+
+                HYPERVISOR_shared_info =
+                        (struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
         } else
                 HYPERVISOR_shared_info =
                         (struct shared_info *)__va(xen_start_info->shared_info);
@@ -917,26 +1007,32 @@ void xen_setup_shared_info(void)
 
 static __init void xen_pagetable_setup_done(pgd_t *base)
 {
-        /* This will work as long as patching hasn't happened yet
-           (which it hasn't) */
-        pv_mmu_ops.alloc_pte = xen_alloc_pte;
-        pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
-        pv_mmu_ops.release_pte = xen_release_pte;
-        pv_mmu_ops.release_pmd = xen_release_pmd;
-        pv_mmu_ops.set_pte = xen_set_pte;
-
         xen_setup_shared_info();
-
-        /* Actually pin the pagetable down, but we can't set PG_pinned
-           yet because the page structures don't exist yet. */
-        pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base)));
 }
 
 static __init void xen_post_allocator_init(void)
 {
+        pv_mmu_ops.set_pte = xen_set_pte;
         pv_mmu_ops.set_pmd = xen_set_pmd;
         pv_mmu_ops.set_pud = xen_set_pud;
+#if PAGETABLE_LEVELS == 4
+        pv_mmu_ops.set_pgd = xen_set_pgd;
+#endif
+
+        /* This will work as long as patching hasn't happened yet
+           (which it hasn't) */
+        pv_mmu_ops.alloc_pte = xen_alloc_pte;
+        pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
+        pv_mmu_ops.release_pte = xen_release_pte;
+        pv_mmu_ops.release_pmd = xen_release_pmd;
+#if PAGETABLE_LEVELS == 4
+        pv_mmu_ops.alloc_pud = xen_alloc_pud;
+        pv_mmu_ops.release_pud = xen_release_pud;
+#endif
 
+#ifdef CONFIG_X86_64
+        SetPagePinned(virt_to_page(level3_user_vsyscall));
+#endif
         xen_mark_init_mm_pinned();
 }
 
@@ -950,6 +1046,7 @@ void xen_setup_vcpu_info_placement(void)
 
         /* xen_vcpu_setup managed to place the vcpu_info within the
            percpu area for all cpus, so make use of it */
+#ifdef CONFIG_X86_32
         if (have_vcpu_info_placement) {
                 printk(KERN_INFO "Xen: using vcpu_info placement\n");
 
@@ -959,6 +1056,7 @@ void xen_setup_vcpu_info_placement(void)
                 pv_irq_ops.irq_enable = xen_irq_enable_direct;
                 pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
         }
+#endif
 }
 
 static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
@@ -979,10 +1077,12 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
         goto patch_site
 
         switch (type) {
+#ifdef CONFIG_X86_32
                 SITE(pv_irq_ops, irq_enable);
                 SITE(pv_irq_ops, irq_disable);
                 SITE(pv_irq_ops, save_fl);
                 SITE(pv_irq_ops, restore_fl);
+#endif /* CONFIG_X86_32 */
 #undef SITE
 
         patch_site:
@@ -1025,8 +1125,15 @@ static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
 #ifdef CONFIG_X86_F00F_BUG
         case FIX_F00F_IDT:
 #endif
+#ifdef CONFIG_X86_32
         case FIX_WP_TEST:
         case FIX_VDSO:
+# ifdef CONFIG_HIGHMEM
+        case FIX_KMAP_BEGIN ... FIX_KMAP_END:
+# endif
+#else
+        case VSYSCALL_LAST_PAGE ... VSYSCALL_FIRST_PAGE:
+#endif
 #ifdef CONFIG_X86_LOCAL_APIC
         case FIX_APIC_BASE:     /* maps dummy local APIC */
 #endif
@@ -1039,6 +1146,15 @@ static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
         }
 
         __native_set_fixmap(idx, pte);
+
+#ifdef CONFIG_X86_64
+        /* Replicate changes to map the vsyscall page into the user
+           pagetable vsyscall mapping. */
+        if (idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) {
+                unsigned long vaddr = __fix_to_virt(idx);
+                set_pte_vaddr_pud(level3_user_vsyscall, vaddr, pte);
+        }
+#endif
 }
 
 static const struct pv_info xen_info __initdata = {
@@ -1084,18 +1200,25 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
         .wbinvd = native_wbinvd,
 
         .read_msr = native_read_msr_safe,
-        .write_msr = native_write_msr_safe,
+        .write_msr = xen_write_msr_safe,
         .read_tsc = native_read_tsc,
         .read_pmc = native_read_pmc,
 
         .iret = xen_iret,
         .irq_enable_sysexit = xen_sysexit,
+#ifdef CONFIG_X86_64
+        .usergs_sysret32 = xen_sysret32,
+        .usergs_sysret64 = xen_sysret64,
+#endif
 
         .load_tr_desc = paravirt_nop,
         .set_ldt = xen_set_ldt,
         .load_gdt = xen_load_gdt,
         .load_idt = xen_load_idt,
         .load_tls = xen_load_tls,
+#ifdef CONFIG_X86_64
+        .load_gs_index = xen_load_gs_index,
+#endif
 
         .store_gdt = native_store_gdt,
         .store_idt = native_store_idt,
@@ -1109,14 +1232,34 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
         .set_iopl_mask = xen_set_iopl_mask,
         .io_delay = xen_io_delay,
 
+        /* Xen takes care of %gs when switching to usermode for us */
+        .swapgs = paravirt_nop,
+
         .lazy_mode = {
                 .enter = paravirt_enter_lazy_cpu,
                 .leave = xen_leave_lazy,
         },
 };
 
+static void __init __xen_init_IRQ(void)
+{
+#ifdef CONFIG_X86_64
+        int i;
+
+        /* Create identity vector->irq map */
+        for(i = 0; i < NR_VECTORS; i++) {
+                int cpu;
+
+                for_each_possible_cpu(cpu)
+                        per_cpu(vector_irq, cpu)[i] = i;
+        }
+#endif  /* CONFIG_X86_64 */
+
+        xen_init_IRQ();
+}
+
 static const struct pv_irq_ops xen_irq_ops __initdata = {
-        .init_IRQ = xen_init_IRQ,
+        .init_IRQ = __xen_init_IRQ,
         .save_fl = xen_save_fl,
         .restore_fl = xen_restore_fl,
         .irq_disable = xen_irq_disable,
@@ -1124,14 +1267,13 @@ static const struct pv_irq_ops xen_irq_ops __initdata = {
         .safe_halt = xen_safe_halt,
         .halt = xen_halt,
 #ifdef CONFIG_X86_64
-        .adjust_exception_frame = paravirt_nop,
+        .adjust_exception_frame = xen_adjust_exception_frame,
 #endif
 };
 
 static const struct pv_apic_ops xen_apic_ops __initdata = {
 #ifdef CONFIG_X86_LOCAL_APIC
         .apic_write = xen_apic_write,
-        .apic_write_atomic = xen_apic_write,
         .apic_read = xen_apic_read,
         .setup_boot_clock = paravirt_nop,
         .setup_secondary_clock = paravirt_nop,
@@ -1157,8 +1299,8 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
         .pte_update = paravirt_nop,
         .pte_update_defer = paravirt_nop,
 
-        .pgd_alloc = __paravirt_pgd_alloc,
-        .pgd_free = paravirt_nop,
+        .pgd_alloc = xen_pgd_alloc,
+        .pgd_free = xen_pgd_free,
 
         .alloc_pte = xen_alloc_pte_init,
         .release_pte = xen_release_pte_init,
@@ -1170,7 +1312,11 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
         .kmap_atomic_pte = xen_kmap_atomic_pte,
 #endif
 
-        .set_pte = NULL,        /* see xen_pagetable_setup_* */
+#ifdef CONFIG_X86_64
+        .set_pte = xen_set_pte,
+#else
+        .set_pte = xen_set_pte_init,
+#endif
         .set_pte_at = xen_set_pte_at,
         .set_pmd = xen_set_pmd_hyper,
 
@@ -1184,15 +1330,26 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
         .make_pte = xen_make_pte,
         .make_pgd = xen_make_pgd,
 
+#ifdef CONFIG_X86_PAE
         .set_pte_atomic = xen_set_pte_atomic,
         .set_pte_present = xen_set_pte_at,
-        .set_pud = xen_set_pud_hyper,
         .pte_clear = xen_pte_clear,
         .pmd_clear = xen_pmd_clear,
+#endif  /* CONFIG_X86_PAE */
+        .set_pud = xen_set_pud_hyper,
 
         .make_pmd = xen_make_pmd,
         .pmd_val = xen_pmd_val,
 
+#if PAGETABLE_LEVELS == 4
+        .pud_val = xen_pud_val,
+        .make_pud = xen_make_pud,
+        .set_pgd = xen_set_pgd_hyper,
+
+        .alloc_pud = xen_alloc_pte_init,
+        .release_pud = xen_release_pte_init,
+#endif  /* PAGETABLE_LEVELS == 4 */
+
         .activate_mm = xen_activate_mm,
         .dup_mmap = xen_dup_mmap,
         .exit_mmap = xen_exit_mmap,
@@ -1205,21 +1362,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
         .set_fixmap = xen_set_fixmap,
 };
 
-#ifdef CONFIG_SMP
-static const struct smp_ops xen_smp_ops __initdata = {
-        .smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
-        .smp_prepare_cpus = xen_smp_prepare_cpus,
-        .cpu_up = xen_cpu_up,
-        .smp_cpus_done = xen_smp_cpus_done,
-
-        .smp_send_stop = xen_smp_send_stop,
-        .smp_send_reschedule = xen_smp_send_reschedule,
-
-        .send_call_func_ipi = xen_smp_send_call_function_ipi,
-        .send_call_func_single_ipi = xen_smp_send_call_function_single_ipi,
-};
-#endif  /* CONFIG_SMP */
-
 static void xen_reboot(int reason)
 {
         struct sched_shutdown r = { .reason = reason };
@@ -1264,6 +1406,7 @@ static const struct machine_ops __initdata xen_machine_ops = {
 
 static void __init xen_reserve_top(void)
 {
+#ifdef CONFIG_X86_32
         unsigned long top = HYPERVISOR_VIRT_START;
         struct xen_platform_parameters pp;
 
@@ -1271,8 +1414,248 @@ static void __init xen_reserve_top(void)
                 top = pp.virt_start;
 
         reserve_top_address(-top + 2 * PAGE_SIZE);
+#endif  /* CONFIG_X86_32 */
+}
+
+/*
+ * Like __va(), but returns address in the kernel mapping (which is
+ * all we have until the physical memory mapping has been set up.
+ */
+static void *__ka(phys_addr_t paddr)
+{
+#ifdef CONFIG_X86_64
+        return (void *)(paddr + __START_KERNEL_map);
+#else
+        return __va(paddr);
+#endif
 }
 
+/* Convert a machine address to physical address */
+static unsigned long m2p(phys_addr_t maddr)
+{
+        phys_addr_t paddr;
+
+        maddr &= PTE_PFN_MASK;
+        paddr = mfn_to_pfn(maddr >> PAGE_SHIFT) << PAGE_SHIFT;
+
+        return paddr;
+}
+
+/* Convert a machine address to kernel virtual */
+static void *m2v(phys_addr_t maddr)
+{
+        return __ka(m2p(maddr));
+}
+
+#ifdef CONFIG_X86_64
+static void walk(pgd_t *pgd, unsigned long addr)
+{
+        unsigned l4idx = pgd_index(addr);
+        unsigned l3idx = pud_index(addr);
+        unsigned l2idx = pmd_index(addr);
+        unsigned l1idx = pte_index(addr);
+        pgd_t l4;
+        pud_t l3;
+        pmd_t l2;
+        pte_t l1;
+
+        xen_raw_printk("walk %p, %lx -> %d %d %d %d\n",
+                       pgd, addr, l4idx, l3idx, l2idx, l1idx);
+
+        l4 = pgd[l4idx];
+        xen_raw_printk("  l4: %016lx\n", l4.pgd);
+        xen_raw_printk("      %016lx\n", pgd_val(l4));
+
+        l3 = ((pud_t *)(m2v(l4.pgd)))[l3idx];
+        xen_raw_printk("  l3: %016lx\n", l3.pud);
+        xen_raw_printk("      %016lx\n", pud_val(l3));
+
+        l2 = ((pmd_t *)(m2v(l3.pud)))[l2idx];
+        xen_raw_printk("  l2: %016lx\n", l2.pmd);
+        xen_raw_printk("      %016lx\n", pmd_val(l2));
+
+        l1 = ((pte_t *)(m2v(l2.pmd)))[l1idx];
+        xen_raw_printk("  l1: %016lx\n", l1.pte);
+        xen_raw_printk("      %016lx\n", pte_val(l1));
+}
+#endif
+
+static void set_page_prot(void *addr, pgprot_t prot)
+{
+        unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
+        pte_t pte = pfn_pte(pfn, prot);
+
+        xen_raw_printk("addr=%p pfn=%lx mfn=%lx prot=%016llx pte=%016llx\n",
+                       addr, pfn, get_phys_to_machine(pfn),
+                       pgprot_val(prot), pte.pte);
+
+        if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
+                BUG();
+}
+
+static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
+{
+        unsigned pmdidx, pteidx;
+        unsigned ident_pte;
+        unsigned long pfn;
+
+        ident_pte = 0;
+        pfn = 0;
+        for(pmdidx = 0; pmdidx < PTRS_PER_PMD && pfn < max_pfn; pmdidx++) {
+                pte_t *pte_page;
+
+                /* Reuse or allocate a page of ptes */
+                if (pmd_present(pmd[pmdidx]))
+                        pte_page = m2v(pmd[pmdidx].pmd);
+                else {
+                        /* Check for free pte pages */
+                        if (ident_pte == ARRAY_SIZE(level1_ident_pgt))
+                                break;
+
+                        pte_page = &level1_ident_pgt[ident_pte];
+                        ident_pte += PTRS_PER_PTE;
+
+                        pmd[pmdidx] = __pmd(__pa(pte_page) | _PAGE_TABLE);
+                }
+
+                /* Install mappings */
+                for(pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
+                        pte_t pte;
+
+                        if (pfn > max_pfn_mapped)
+                                max_pfn_mapped = pfn;
+
+                        if (!pte_none(pte_page[pteidx]))
+                                continue;
+
+                        pte = pfn_pte(pfn, PAGE_KERNEL_EXEC);
+                        pte_page[pteidx] = pte;
+                }
+        }
+
+        for(pteidx = 0; pteidx < ident_pte; pteidx += PTRS_PER_PTE)
+                set_page_prot(&level1_ident_pgt[pteidx], PAGE_KERNEL_RO);
+
+        set_page_prot(pmd, PAGE_KERNEL_RO);
+}
+
+#ifdef CONFIG_X86_64
+static void convert_pfn_mfn(void *v)
+{
+        pte_t *pte = v;
+        int i;
+
+        /* All levels are converted the same way, so just treat them
+           as ptes. */
+        for(i = 0; i < PTRS_PER_PTE; i++)
+                pte[i] = xen_make_pte(pte[i].pte);
+}
+
+/*
+ * Set up the inital kernel pagetable.
+ *
+ * We can construct this by grafting the Xen provided pagetable into
+ * head_64.S's preconstructed pagetables.  We copy the Xen L2's into
+ * level2_ident_pgt, level2_kernel_pgt and level2_fixmap_pgt.  This
+ * means that only the kernel has a physical mapping to start with -
+ * but that's enough to get __va working.  We need to fill in the rest
+ * of the physical mapping once some sort of allocator has been set
+ * up.
+ */
+static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
+{
+        pud_t *l3;
+        pmd_t *l2;
+
+        /* Zap identity mapping */
+        init_level4_pgt[0] = __pgd(0);
+
+        /* Pre-constructed entries are in pfn, so convert to mfn */
+        convert_pfn_mfn(init_level4_pgt);
+        convert_pfn_mfn(level3_ident_pgt);
+        convert_pfn_mfn(level3_kernel_pgt);
+
+        l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
+        l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
+
+        memcpy(level2_ident_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+        memcpy(level2_kernel_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+        l3 = m2v(pgd[pgd_index(__START_KERNEL_map + PMD_SIZE)].pgd);
+        l2 = m2v(l3[pud_index(__START_KERNEL_map + PMD_SIZE)].pud);
+        memcpy(level2_fixmap_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+        /* Set up identity map */
+        xen_map_identity_early(level2_ident_pgt, max_pfn);
+
+        /* Make pagetable pieces RO */
+        set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
+        set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
+        set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
+        set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
+        set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+        set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
+
+        /* Pin down new L4 */
+        pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
+                          PFN_DOWN(__pa_symbol(init_level4_pgt)));
+
+        /* Unpin Xen-provided one */
+        pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+        /* Switch over */
+        pgd = init_level4_pgt;
+
+        /*
+         * At this stage there can be no user pgd, and no page
+         * structure to attach it to, so make sure we just set kernel
+         * pgd.
+         */
+        xen_mc_batch();
+        __xen_write_cr3(true, __pa(pgd));
+        xen_mc_issue(PARAVIRT_LAZY_CPU);
+
+        reserve_early(__pa(xen_start_info->pt_base),
+                      __pa(xen_start_info->pt_base +
+                           xen_start_info->nr_pt_frames * PAGE_SIZE),
+                      "XEN PAGETABLES");
+
+        return pgd;
+}
+#else   /* !CONFIG_X86_64 */
+static pmd_t level2_kernel_pgt[PTRS_PER_PMD] __page_aligned_bss;
+
+static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
+{
+        pmd_t *kernel_pmd;
+
+        init_pg_tables_start = __pa(pgd);
+        init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
+        max_pfn_mapped = PFN_DOWN(init_pg_tables_end + 512*1024);
+
+        kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
+        memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+
+        xen_map_identity_early(level2_kernel_pgt, max_pfn);
+
+        memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+        set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
+                        __pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+
+        set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+        set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+        set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
+
+        pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+        xen_write_cr3(__pa(swapper_pg_dir));
+
+        pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+
+        return swapper_pg_dir;
+}
+#endif  /* CONFIG_X86_64 */
+
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
@@ -1301,53 +1684,56 @@ asmlinkage void __init xen_start_kernel(void)
 
         machine_ops = xen_machine_ops;
 
-#ifdef CONFIG_SMP
-        smp_ops = xen_smp_ops;
+#ifdef CONFIG_X86_64
+        /* Disable until direct per-cpu data access. */
+        have_vcpu_info_placement = 0;
+        x86_64_init_pda();
 #endif
 
+        xen_smp_init();
+
         /* Get mfn list */
         if (!xen_feature(XENFEAT_auto_translated_physmap))
                 xen_build_dynamic_phys_to_machine();
 
         pgd = (pgd_t *)xen_start_info->pt_base;
 
-        init_pg_tables_start = __pa(pgd);
-        init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
-        max_pfn_mapped = (init_pg_tables_end + 512*1024) >> PAGE_SHIFT;
-
-        init_mm.pgd = pgd; /* use the Xen pagetables to start */
-
-        /* keep using Xen gdt for now; no urgent need to change it */
-
-        x86_write_percpu(xen_cr3, __pa(pgd));
-        x86_write_percpu(xen_current_cr3, __pa(pgd));
+        /* Prevent unwanted bits from being set in PTEs. */
+        __supported_pte_mask &= ~_PAGE_GLOBAL;
+        if (!is_initial_xendomain())
+                __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
 
         /* Don't do the full vcpu_info placement stuff until we have a
            possible map and a non-dummy shared_info. */
         per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
 
+        xen_raw_console_write("mapping kernel into physical memory\n");
+        pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
+
+        init_mm.pgd = pgd;
+
+        /* keep using Xen gdt for now; no urgent need to change it */
+
         pv_info.kernel_rpl = 1;
         if (xen_feature(XENFEAT_supervisor_mode_kernel))
                 pv_info.kernel_rpl = 0;
 
-        /* Prevent unwanted bits from being set in PTEs. */
-        __supported_pte_mask &= ~_PAGE_GLOBAL;
-        if (!is_initial_xendomain())
-                __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
         /* set the limit of our address space */
         xen_reserve_top();
 
+#ifdef CONFIG_X86_32
         /* set up basic CPUID stuff */
         cpu_detect(&new_cpu_data);
         new_cpu_data.hard_math = 1;
         new_cpu_data.x86_capability[0] = cpuid_edx(1);
+#endif
 
         /* Poke various useful things into boot_params */
         boot_params.hdr.type_of_loader = (9 << 4) | 0;
         boot_params.hdr.ramdisk_image = xen_start_info->mod_start
                 ? __pa(xen_start_info->mod_start) : 0;
         boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
+        boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
 
         if (!is_initial_xendomain()) {
                 add_preferred_console("xenboot", 0, NULL);
@@ -1355,6 +1741,21 @@ asmlinkage void __init xen_start_kernel(void)
                 add_preferred_console("hvc", 0, NULL);
         }
 
+        xen_raw_console_write("about to get started...\n");
+
+#if 0
+        xen_raw_printk("&boot_params=%p __pa(&boot_params)=%lx __va(__pa(&boot_params))=%lx\n",
+                       &boot_params, __pa_symbol(&boot_params),
+                       __va(__pa_symbol(&boot_params)));
+
+        walk(pgd, &boot_params);
+        walk(pgd, __va(__pa(&boot_params)));
+#endif
+
         /* Start the world */
+#ifdef CONFIG_X86_32
         i386_start_kernel();
+#else
+        x86_64_start_reservations((char *)__pa_symbol(&boot_params));
+#endif
 }
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index ff0aa74afaa1..aa37469da696 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -44,8 +44,10 @@
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
+#include <asm/fixmap.h>
 #include <asm/mmu_context.h>
 #include <asm/paravirt.h>
+#include <asm/linkage.h>
 
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
@@ -56,26 +58,29 @@
 #include "multicalls.h"
 #include "mmu.h"
 
+/*
+ * Just beyond the highest usermode address.  STACK_TOP_MAX has a
+ * redzone above it, so round it up to a PGD boundary.
+ */
+#define USER_LIMIT      ((STACK_TOP_MAX + PGDIR_SIZE - 1) & PGDIR_MASK)
+
+
 #define P2M_ENTRIES_PER_PAGE    (PAGE_SIZE / sizeof(unsigned long))
 #define TOP_ENTRIES             (MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE)
 
 /* Placeholder for holes in the address space */
-static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE]
-        __attribute__((section(".data.page_aligned"))) =
+static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE] __page_aligned_data =
                 { [ 0 ... P2M_ENTRIES_PER_PAGE-1 ] = ~0UL };
 
  /* Array of pointers to pages containing p2m entries */
-static unsigned long *p2m_top[TOP_ENTRIES]
-        __attribute__((section(".data.page_aligned"))) =
+static unsigned long *p2m_top[TOP_ENTRIES] __page_aligned_data =
                 { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] };
 
 /* Arrays of p2m arrays expressed in mfns used for save/restore */
-static unsigned long p2m_top_mfn[TOP_ENTRIES]
-        __attribute__((section(".bss.page_aligned")));
+static unsigned long p2m_top_mfn[TOP_ENTRIES] __page_aligned_bss;
 
-static unsigned long p2m_top_mfn_list[
-                        PAGE_ALIGN(TOP_ENTRIES / P2M_ENTRIES_PER_PAGE)]
-        __attribute__((section(".bss.page_aligned")));
+static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE]
+        __page_aligned_bss;
 
 static inline unsigned p2m_top_index(unsigned long pfn)
 {
@@ -181,15 +186,16 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
         p2m_top[topidx][idx] = mfn;
 }
 
-xmaddr_t arbitrary_virt_to_machine(unsigned long address)
+xmaddr_t arbitrary_virt_to_machine(void *vaddr)
 {
+        unsigned long address = (unsigned long)vaddr;
         unsigned int level;
         pte_t *pte = lookup_address(address, &level);
         unsigned offset = address & ~PAGE_MASK;
 
         BUG_ON(pte == NULL);
 
-        return XMADDR((pte_mfn(*pte) << PAGE_SHIFT) + offset);
+        return XMADDR(((phys_addr_t)pte_mfn(*pte) << PAGE_SHIFT) + offset);
 }
 
 void make_lowmem_page_readonly(void *vaddr)
@@ -256,7 +262,8 @@ void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val)
 
         xen_mc_batch();
 
-        u.ptr = virt_to_machine(ptr).maddr;
+        /* ptr may be ioremapped for 64-bit pagetable setup */
+        u.ptr = arbitrary_virt_to_machine(ptr).maddr;
         u.val = pmd_val_ma(val);
         extend_mmu_update(&u);
 
@@ -283,35 +290,7 @@ void xen_set_pmd(pmd_t *ptr, pmd_t val)
  */
 void set_pte_mfn(unsigned long vaddr, unsigned long mfn, pgprot_t flags)
 {
-        pgd_t *pgd;
-        pud_t *pud;
-        pmd_t *pmd;
-        pte_t *pte;
-
-        pgd = swapper_pg_dir + pgd_index(vaddr);
-        if (pgd_none(*pgd)) {
-                BUG();
-                return;
-        }
-        pud = pud_offset(pgd, vaddr);
-        if (pud_none(*pud)) {
-                BUG();
-                return;
-        }
-        pmd = pmd_offset(pud, vaddr);
-        if (pmd_none(*pmd)) {
-                BUG();
-                return;
-        }
-        pte = pte_offset_kernel(pmd, vaddr);
-        /* <mfn,flags> stored as-is, to permit clearing entries */
-        xen_set_pte(pte, mfn_pte(mfn, flags));
-
-        /*
-         * It's enough to flush this one mapping.
-         * (PGE mappings get flushed as well)
-         */
-        __flush_tlb_one(vaddr);
+        set_pte_vaddr(vaddr, mfn_pte(mfn, flags));
 }
 
 void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
@@ -364,8 +343,8 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 static pteval_t pte_mfn_to_pfn(pteval_t val)
 {
         if (val & _PAGE_PRESENT) {
-                unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT;
-                pteval_t flags = val & ~PTE_MASK;
+                unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+                pteval_t flags = val & PTE_FLAGS_MASK;
                 val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
         }
 
@@ -375,8 +354,8 @@ static pteval_t pte_mfn_to_pfn(pteval_t val)
 static pteval_t pte_pfn_to_mfn(pteval_t val)
 {
         if (val & _PAGE_PRESENT) {
-                unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT;
-                pteval_t flags = val & ~PTE_MASK;
+                unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+                pteval_t flags = val & PTE_FLAGS_MASK;
                 val = ((pteval_t)pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
         }
 
@@ -418,7 +397,8 @@ void xen_set_pud_hyper(pud_t *ptr, pud_t val)
 
         xen_mc_batch();
 
-        u.ptr = virt_to_machine(ptr).maddr;
+        /* ptr may be ioremapped for 64-bit pagetable setup */
+        u.ptr = arbitrary_virt_to_machine(ptr).maddr;
         u.val = pud_val_ma(val);
         extend_mmu_update(&u);
 
@@ -441,14 +421,19 @@ void xen_set_pud(pud_t *ptr, pud_t val)
 
 void xen_set_pte(pte_t *ptep, pte_t pte)
 {
+#ifdef CONFIG_X86_PAE
         ptep->pte_high = pte.pte_high;
         smp_wmb();
         ptep->pte_low = pte.pte_low;
+#else
+        *ptep = pte;
+#endif
 }
 
+#ifdef CONFIG_X86_PAE
 void xen_set_pte_atomic(pte_t *ptep, pte_t pte)
 {
-        set_64bit((u64 *)ptep, pte_val_ma(pte));
+        set_64bit((u64 *)ptep, native_pte_val(pte));
 }
 
 void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
@@ -462,6 +447,7 @@ void xen_pmd_clear(pmd_t *pmdp)
 {
         set_pmd(pmdp, __pmd(0));
 }
+#endif  /* CONFIG_X86_PAE */
 
 pmd_t xen_make_pmd(pmdval_t pmd)
 {
@@ -469,78 +455,189 @@ pmd_t xen_make_pmd(pmdval_t pmd)
         return native_make_pmd(pmd);
 }
 
+#if PAGETABLE_LEVELS == 4
+pudval_t xen_pud_val(pud_t pud)
+{
+        return pte_mfn_to_pfn(pud.pud);
+}
+
+pud_t xen_make_pud(pudval_t pud)
+{
+        pud = pte_pfn_to_mfn(pud);
+
+        return native_make_pud(pud);
+}
+
+pgd_t *xen_get_user_pgd(pgd_t *pgd)
+{
+        pgd_t *pgd_page = (pgd_t *)(((unsigned long)pgd) & PAGE_MASK);
+        unsigned offset = pgd - pgd_page;
+        pgd_t *user_ptr = NULL;
+
+        if (offset < pgd_index(USER_LIMIT)) {
+                struct page *page = virt_to_page(pgd_page);
+                user_ptr = (pgd_t *)page->private;
+                if (user_ptr)
+                        user_ptr += offset;
+        }
+
+        return user_ptr;
+}
+
+static void __xen_set_pgd_hyper(pgd_t *ptr, pgd_t val)
+{
+        struct mmu_update u;
+
+        u.ptr = virt_to_machine(ptr).maddr;
+        u.val = pgd_val_ma(val);
+        extend_mmu_update(&u);
+}
+
+/*
+ * Raw hypercall-based set_pgd, intended for in early boot before
+ * there's a page structure.  This implies:
+ *  1. The only existing pagetable is the kernel's
+ *  2. It is always pinned
+ *  3. It has no user pagetable attached to it
+ */
+void __init xen_set_pgd_hyper(pgd_t *ptr, pgd_t val)
+{
+        preempt_disable();
+
+        xen_mc_batch();
+
+        __xen_set_pgd_hyper(ptr, val);
+
+        xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+        preempt_enable();
+}
+
+void xen_set_pgd(pgd_t *ptr, pgd_t val)
+{
+        pgd_t *user_ptr = xen_get_user_pgd(ptr);
+
+        /* If page is not pinned, we can just update the entry
+           directly */
+        if (!page_pinned(ptr)) {
+                *ptr = val;
+                if (user_ptr) {
+                        WARN_ON(page_pinned(user_ptr));
+                        *user_ptr = val;
+                }
+                return;
+        }
+
+        /* If it's pinned, then we can at least batch the kernel and
+           user updates together. */
+        xen_mc_batch();
+
+        __xen_set_pgd_hyper(ptr, val);
+        if (user_ptr)
+                __xen_set_pgd_hyper(user_ptr, val);
+
+        xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+#endif  /* PAGETABLE_LEVELS == 4 */
+
 /*
-  (Yet another) pagetable walker.  This one is intended for pinning a
-  pagetable.  This means that it walks a pagetable and calls the
-  callback function on each page it finds making up the page table,
-  at every level.  It walks the entire pagetable, but it only bothers
-  pinning pte pages which are below pte_limit.  In the normal case
-  this will be TASK_SIZE, but at boot we need to pin up to
-  FIXADDR_TOP.  But the important bit is that we don't pin beyond
-  there, because then we start getting into Xen's ptes.
-*/
-static int pgd_walk(pgd_t *pgd_base, int (*func)(struct page *, enum pt_level),
+ * (Yet another) pagetable walker.  This one is intended for pinning a
+ * pagetable.  This means that it walks a pagetable and calls the
+ * callback function on each page it finds making up the page table,
+ * at every level.  It walks the entire pagetable, but it only bothers
+ * pinning pte pages which are below limit.  In the normal case this
+ * will be STACK_TOP_MAX, but at boot we need to pin up to
+ * FIXADDR_TOP.
+ *
+ * For 32-bit the important bit is that we don't pin beyond there,
+ * because then we start getting into Xen's ptes.
+ *
+ * For 64-bit, we must skip the Xen hole in the middle of the address
+ * space, just after the big x86-64 virtual hole.
+ */
+static int pgd_walk(pgd_t *pgd, int (*func)(struct page *, enum pt_level),
                     unsigned long limit)
 {
-        pgd_t *pgd = pgd_base;
         int flush = 0;
-        unsigned long addr = 0;
-        unsigned long pgd_next;
+        unsigned hole_low, hole_high;
+        unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
+        unsigned pgdidx, pudidx, pmdidx;
 
-        BUG_ON(limit > FIXADDR_TOP);
+        /* The limit is the last byte to be touched */
+        limit--;
+        BUG_ON(limit >= FIXADDR_TOP);
 
         if (xen_feature(XENFEAT_auto_translated_physmap))
                 return 0;
 
-        for (; addr != FIXADDR_TOP; pgd++, addr = pgd_next) {
+        /*
+         * 64-bit has a great big hole in the middle of the address
+         * space, which contains the Xen mappings.  On 32-bit these
+         * will end up making a zero-sized hole and so is a no-op.
+         */
+        hole_low = pgd_index(USER_LIMIT);
+        hole_high = pgd_index(PAGE_OFFSET);
+
+        pgdidx_limit = pgd_index(limit);
+#if PTRS_PER_PUD > 1
+        pudidx_limit = pud_index(limit);
+#else
+        pudidx_limit = 0;
+#endif
+#if PTRS_PER_PMD > 1
+        pmdidx_limit = pmd_index(limit);
+#else
+        pmdidx_limit = 0;
+#endif
+
+        flush |= (*func)(virt_to_page(pgd), PT_PGD);
+
+        for (pgdidx = 0; pgdidx <= pgdidx_limit; pgdidx++) {
                 pud_t *pud;
-                unsigned long pud_limit, pud_next;
 
-                pgd_next = pud_limit = pgd_addr_end(addr, FIXADDR_TOP);
+                if (pgdidx >= hole_low && pgdidx < hole_high)
+                        continue;
 
-                if (!pgd_val(*pgd))
+                if (!pgd_val(pgd[pgdidx]))
                         continue;
 
-                pud = pud_offset(pgd, 0);
+                pud = pud_offset(&pgd[pgdidx], 0);
 
                 if (PTRS_PER_PUD > 1) /* not folded */
                         flush |= (*func)(virt_to_page(pud), PT_PUD);
 
-                for (; addr != pud_limit; pud++, addr = pud_next) {
+                for (pudidx = 0; pudidx < PTRS_PER_PUD; pudidx++) {
                         pmd_t *pmd;
-                        unsigned long pmd_limit;
 
-                        pud_next = pud_addr_end(addr, pud_limit);
-
-                        if (pud_next < limit)
-                                pmd_limit = pud_next;
-                        else
-                                pmd_limit = limit;
+                        if (pgdidx == pgdidx_limit &&
+                            pudidx > pudidx_limit)
+                                goto out;
 
-                        if (pud_none(*pud))
+                        if (pud_none(pud[pudidx]))
                                 continue;
 
-                        pmd = pmd_offset(pud, 0);
+                        pmd = pmd_offset(&pud[pudidx], 0);
 
                         if (PTRS_PER_PMD > 1) /* not folded */
                                 flush |= (*func)(virt_to_page(pmd), PT_PMD);
 
-                        for (; addr != pmd_limit; pmd++) {
-                                addr += (PAGE_SIZE * PTRS_PER_PTE);
-                                if ((pmd_limit-1) < (addr-1)) {
-                                        addr = pmd_limit;
-                                        break;
-                                }
+                        for (pmdidx = 0; pmdidx < PTRS_PER_PMD; pmdidx++) {
+                                struct page *pte;
+
+                                if (pgdidx == pgdidx_limit &&
+                                    pudidx == pudidx_limit &&
+                                    pmdidx > pmdidx_limit)
+                                        goto out;
 
-                                if (pmd_none(*pmd))
+                                if (pmd_none(pmd[pmdidx]))
                                         continue;
 
-                                flush |= (*func)(pmd_page(*pmd), PT_PTE);
+                                pte = pmd_page(pmd[pmdidx]);
+                                flush |= (*func)(pte, PT_PTE);
                         }
                 }
         }
-
-        flush |= (*func)(virt_to_page(pgd_base), PT_PGD);
+out:
 
         return flush;
 }
@@ -622,14 +719,31 @@ void xen_pgd_pin(pgd_t *pgd)
 {
         xen_mc_batch();
 
-        if (pgd_walk(pgd, pin_page, TASK_SIZE)) {
+        if (pgd_walk(pgd, pin_page, USER_LIMIT)) {
                 /* re-enable interrupts for kmap_flush_unused */
                 xen_mc_issue(0);
                 kmap_flush_unused();
                 xen_mc_batch();
         }
 
+#ifdef CONFIG_X86_64
+        {
+                pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+                xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(pgd)));
+
+                if (user_pgd) {
+                        pin_page(virt_to_page(user_pgd), PT_PGD);
+                        xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(user_pgd)));
+                }
+        }
+#else /* CONFIG_X86_32 */
+#ifdef CONFIG_X86_PAE
+        /* Need to make sure unshared kernel PMD is pinnable */
+        pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+#endif
         xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd)));
+#endif /* CONFIG_X86_64 */
         xen_mc_issue(0);
 }
 
@@ -656,9 +770,11 @@ void xen_mm_pin_all(void)
         spin_unlock_irqrestore(&pgd_lock, flags);
 }
 
-/* The init_mm pagetable is really pinned as soon as its created, but
-   that's before we have page structures to store the bits.  So do all
-   the book-keeping now. */
+/*
+ * The init_mm pagetable is really pinned as soon as its created, but
+ * that's before we have page structures to store the bits.  So do all
+ * the book-keeping now.
+ */
 static __init int mark_pinned(struct page *page, enum pt_level level)
 {
         SetPagePinned(page);
@@ -708,7 +824,23 @@ static void xen_pgd_unpin(pgd_t *pgd)
 
         xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
 
-        pgd_walk(pgd, unpin_page, TASK_SIZE);
+#ifdef CONFIG_X86_64
+        {
+                pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+                if (user_pgd) {
+                        xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(user_pgd)));
+                        unpin_page(virt_to_page(user_pgd), PT_PGD);
+                }
+        }
+#endif
+
+#ifdef CONFIG_X86_PAE
+        /* Need to make sure unshared kernel PMD is unpinned */
+        pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+#endif
+
+        pgd_walk(pgd, unpin_page, USER_LIMIT);
 
         xen_mc_issue(0);
 }
@@ -727,7 +859,6 @@ void xen_mm_unpin_all(void)
         list_for_each_entry(page, &pgd_list, lru) {
                 if (PageSavePinned(page)) {
                         BUG_ON(!PagePinned(page));
-                        printk("unpinning pinned %p\n", page_address(page));
                         xen_pgd_unpin((pgd_t *)page_address(page));
                         ClearPageSavePinned(page);
                 }
@@ -757,8 +888,15 @@ void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm)
 static void drop_other_mm_ref(void *info)
 {
         struct mm_struct *mm = info;
+        struct mm_struct *active_mm;
+
+#ifdef CONFIG_X86_64
+        active_mm = read_pda(active_mm);
+#else
+        active_mm = __get_cpu_var(cpu_tlbstate).active_mm;
+#endif
 
-        if (__get_cpu_var(cpu_tlbstate).active_mm == mm)
+        if (active_mm == mm)
                 leave_mm(smp_processor_id());
 
         /* If this cpu still has a stale cr3 reference, then make sure
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index 297bf9f5b8bc..0f59bd03f9e3 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -10,18 +10,6 @@ enum pt_level {
         PT_PTE
 };
 
-/*
- * Page-directory addresses above 4GB do not fit into architectural %cr3.
- * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
- * must use the following accessor macros to pack/unpack valid MFNs.
- *
- * Note that Xen is using the fact that the pagetable base is always
- * page-aligned, and putting the 12 MSB of the address into the 12 LSB
- * of cr3.
- */
-#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
-#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
-
 
 void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
 
@@ -44,13 +32,26 @@ pgd_t xen_make_pgd(pgdval_t);
 void xen_set_pte(pte_t *ptep, pte_t pteval);
 void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
                     pte_t *ptep, pte_t pteval);
+
+#ifdef CONFIG_X86_PAE
 void xen_set_pte_atomic(pte_t *ptep, pte_t pte);
+void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+void xen_pmd_clear(pmd_t *pmdp);
+#endif  /* CONFIG_X86_PAE */
+
 void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval);
 void xen_set_pud(pud_t *ptr, pud_t val);
 void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval);
 void xen_set_pud_hyper(pud_t *ptr, pud_t val);
-void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
-void xen_pmd_clear(pmd_t *pmdp);
+
+#if PAGETABLE_LEVELS == 4
+pudval_t xen_pud_val(pud_t pud);
+pud_t xen_make_pud(pudval_t pudval);
+void xen_set_pgd(pgd_t *pgdp, pgd_t pgd);
+void xen_set_pgd_hyper(pgd_t *pgdp, pgd_t pgd);
+#endif
+
+pgd_t *xen_get_user_pgd(pgd_t *pgd);
 
 pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
 void  xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 3c63c4da7ed1..9efd1c6c9776 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -76,6 +76,7 @@ void xen_mc_flush(void)
                 if (ret) {
                         printk(KERN_ERR "%d multicall(s) failed: cpu %d\n",
                                ret, smp_processor_id());
+                        dump_stack();
                         for (i = 0; i < b->mcidx; i++) {
                                 printk("  call %2d/%d: op=%lu arg=[%lx] result=%ld\n",
                                        i+1, b->mcidx,
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index e0a39595bde3..b6acc3a0af46 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -83,30 +83,72 @@ static void xen_idle(void)
 
 /*
  * Set the bit indicating "nosegneg" library variants should be used.
+ * We only need to bother in pure 32-bit mode; compat 32-bit processes
+ * can have un-truncated segments, so wrapping around is allowed.
  */
 static void __init fiddle_vdso(void)
 {
-        extern const char vdso32_default_start;
-        u32 *mask = VDSO32_SYMBOL(&vdso32_default_start, NOTE_MASK);
+#ifdef CONFIG_X86_32
+        u32 *mask;
+        mask = VDSO32_SYMBOL(&vdso32_int80_start, NOTE_MASK);
         *mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
+        mask = VDSO32_SYMBOL(&vdso32_sysenter_start, NOTE_MASK);
+        *mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
+#endif
 }
 
-void xen_enable_sysenter(void)
+static __cpuinit int register_callback(unsigned type, const void *func)
 {
-        int cpu = smp_processor_id();
-        extern void xen_sysenter_target(void);
-        /* Mask events on entry, even though they get enabled immediately */
-        static struct callback_register sysenter = {
-                .type = CALLBACKTYPE_sysenter,
-                .address = { __KERNEL_CS, (unsigned long)xen_sysenter_target },
+        struct callback_register callback = {
+                .type = type,
+                .address = XEN_CALLBACK(__KERNEL_CS, func),
                 .flags = CALLBACKF_mask_events,
         };
 
-        if (!boot_cpu_has(X86_FEATURE_SEP) ||
-            HYPERVISOR_callback_op(CALLBACKOP_register, &sysenter) != 0) {
-                clear_cpu_cap(&cpu_data(cpu), X86_FEATURE_SEP);
-                clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SEP);
+        return HYPERVISOR_callback_op(CALLBACKOP_register, &callback);
+}
+
+void __cpuinit xen_enable_sysenter(void)
+{
+        extern void xen_sysenter_target(void);
+        int ret;
+        unsigned sysenter_feature;
+
+#ifdef CONFIG_X86_32
+        sysenter_feature = X86_FEATURE_SEP;
+#else
+        sysenter_feature = X86_FEATURE_SYSENTER32;
+#endif
+
+        if (!boot_cpu_has(sysenter_feature))
+                return;
+
+        ret = register_callback(CALLBACKTYPE_sysenter, xen_sysenter_target);
+        if(ret != 0)
+                setup_clear_cpu_cap(sysenter_feature);
+}
+
+void __cpuinit xen_enable_syscall(void)
+{
+#ifdef CONFIG_X86_64
+        int ret;
+        extern void xen_syscall_target(void);
+        extern void xen_syscall32_target(void);
+
+        ret = register_callback(CALLBACKTYPE_syscall, xen_syscall_target);
+        if (ret != 0) {
+                printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
+                /* Pretty fatal; 64-bit userspace has no other
+                   mechanism for syscalls. */
         }
+
+        if (boot_cpu_has(X86_FEATURE_SYSCALL32)) {
+                ret = register_callback(CALLBACKTYPE_syscall32,
+                                        xen_syscall32_target);
+                if (ret != 0)
+                        setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
+        }
+#endif /* CONFIG_X86_64 */
 }
 
 void __init xen_arch_setup(void)
@@ -120,10 +162,12 @@ void __init xen_arch_setup(void)
         if (!xen_feature(XENFEAT_auto_translated_physmap))
                 HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_pae_extended_cr3);
 
-        HYPERVISOR_set_callbacks(__KERNEL_CS, (unsigned long)xen_hypervisor_callback,
-                                 __KERNEL_CS, (unsigned long)xen_failsafe_callback);
+        if (register_callback(CALLBACKTYPE_event, xen_hypervisor_callback) ||
+            register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
+                BUG();
 
         xen_enable_sysenter();
+        xen_enable_syscall();
 
         set_iopl.iopl = 1;
         rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
@@ -143,11 +187,6 @@ void __init xen_arch_setup(void)
 
         pm_idle = xen_idle;
 
-#ifdef CONFIG_SMP
-        /* fill cpus_possible with all available cpus */
-        xen_fill_possible_map();
-#endif
-
         paravirt_disable_iospace();
 
         fiddle_vdso();
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 233156f39b7f..d8faf79a0a1d 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -15,6 +15,7 @@
  * This does not handle HOTPLUG_CPU yet.
  */
 #include <linux/sched.h>
+#include <linux/kernel_stat.h>
 #include <linux/err.h>
 #include <linux/smp.h>
 
@@ -35,6 +36,8 @@
 #include "xen-ops.h"
 #include "mmu.h"
 
+static void __cpuinit xen_init_lock_cpu(int cpu);
+
 cpumask_t xen_cpu_initialized_map;
 
 static DEFINE_PER_CPU(int, resched_irq);
@@ -66,13 +69,22 @@ static __cpuinit void cpu_bringup_and_idle(void)
         int cpu = smp_processor_id();
 
         cpu_init();
+        preempt_disable();
+
         xen_enable_sysenter();
+        xen_enable_syscall();
 
-        preempt_disable();
-        per_cpu(cpu_state, cpu) = CPU_ONLINE;
+        cpu = smp_processor_id();
+        smp_store_cpu_info(cpu);
+        cpu_data(cpu).x86_max_cores = 1;
+        set_cpu_sibling_map(cpu);
 
         xen_setup_cpu_clockevents();
 
+        cpu_set(cpu, cpu_online_map);
+        x86_write_percpu(cpu_state, CPU_ONLINE);
+        wmb();
+
         /* We can take interrupts now: we're officially "up". */
         local_irq_enable();
 
@@ -141,56 +153,39 @@ static int xen_smp_intr_init(unsigned int cpu)
         return rc;
 }
 
-void __init xen_fill_possible_map(void)
+static void __init xen_fill_possible_map(void)
 {
         int i, rc;
 
         for (i = 0; i < NR_CPUS; i++) {
                 rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
-                if (rc >= 0)
+                if (rc >= 0) {
+                        num_processors++;
                         cpu_set(i, cpu_possible_map);
+                }
         }
 }
 
-void __init xen_smp_prepare_boot_cpu(void)
+static void __init xen_smp_prepare_boot_cpu(void)
 {
-        int cpu;
-
         BUG_ON(smp_processor_id() != 0);
         native_smp_prepare_boot_cpu();
 
         /* We've switched to the "real" per-cpu gdt, so make sure the
            old memory can be recycled */
-        make_lowmem_page_readwrite(&per_cpu__gdt_page);
-
-        for_each_possible_cpu(cpu) {
-                cpus_clear(per_cpu(cpu_sibling_map, cpu));
-                /*
-                 * cpu_core_map lives in a per cpu area that is cleared
-                 * when the per cpu array is allocated.
-                 *
-                 * cpus_clear(per_cpu(cpu_core_map, cpu));
-                 */
-        }
+        make_lowmem_page_readwrite(&per_cpu_var(gdt_page));
 
         xen_setup_vcpu_info_placement();
 }
 
-void __init xen_smp_prepare_cpus(unsigned int max_cpus)
+static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
 {
         unsigned cpu;
 
-        for_each_possible_cpu(cpu) {
-                cpus_clear(per_cpu(cpu_sibling_map, cpu));
-                /*
-                 * cpu_core_ map will be zeroed when the per
-                 * cpu area is allocated.
-                 *
-                 * cpus_clear(per_cpu(cpu_core_map, cpu));
-                 */
-        }
+        xen_init_lock_cpu(0);
 
         smp_store_cpu_info(0);
+        cpu_data(0).x86_max_cores = 1;
         set_cpu_sibling_map(0);
 
         if (xen_smp_intr_init(0))
@@ -225,7 +220,7 @@ static __cpuinit int
 cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 {
         struct vcpu_guest_context *ctxt;
-        struct gdt_page *gdt = &per_cpu(gdt_page, cpu);
+        struct desc_struct *gdt;
 
         if (cpu_test_and_set(cpu, xen_cpu_initialized_map))
                 return 0;
@@ -234,12 +229,15 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
         if (ctxt == NULL)
                 return -ENOMEM;
 
+        gdt = get_cpu_gdt_table(cpu);
+
         ctxt->flags = VGCF_IN_KERNEL;
         ctxt->user_regs.ds = __USER_DS;
         ctxt->user_regs.es = __USER_DS;
-        ctxt->user_regs.fs = __KERNEL_PERCPU;
-        ctxt->user_regs.gs = 0;
         ctxt->user_regs.ss = __KERNEL_DS;
+#ifdef CONFIG_X86_32
+        ctxt->user_regs.fs = __KERNEL_PERCPU;
+#endif
         ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
         ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
 
@@ -249,11 +247,11 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 
         ctxt->ldt_ents = 0;
 
-        BUG_ON((unsigned long)gdt->gdt & ~PAGE_MASK);
-        make_lowmem_page_readonly(gdt->gdt);
+        BUG_ON((unsigned long)gdt & ~PAGE_MASK);
+        make_lowmem_page_readonly(gdt);
 
-        ctxt->gdt_frames[0] = virt_to_mfn(gdt->gdt);
-        ctxt->gdt_ents      = ARRAY_SIZE(gdt->gdt);
+        ctxt->gdt_frames[0] = virt_to_mfn(gdt);
+        ctxt->gdt_ents      = GDT_ENTRIES;
 
         ctxt->user_regs.cs = __KERNEL_CS;
         ctxt->user_regs.esp = idle->thread.sp0 - sizeof(struct pt_regs);
@@ -261,9 +259,11 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
         ctxt->kernel_ss = __KERNEL_DS;
         ctxt->kernel_sp = idle->thread.sp0;
 
+#ifdef CONFIG_X86_32
         ctxt->event_callback_cs     = __KERNEL_CS;
-        ctxt->event_callback_eip    = (unsigned long)xen_hypervisor_callback;
         ctxt->failsafe_callback_cs  = __KERNEL_CS;
+#endif
+        ctxt->event_callback_eip    = (unsigned long)xen_hypervisor_callback;
         ctxt->failsafe_callback_eip = (unsigned long)xen_failsafe_callback;
 
         per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
@@ -276,7 +276,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
         return 0;
 }
 
-int __cpuinit xen_cpu_up(unsigned int cpu)
+static int __cpuinit xen_cpu_up(unsigned int cpu)
 {
         struct task_struct *idle = idle_task(cpu);
         int rc;
@@ -287,10 +287,28 @@ int __cpuinit xen_cpu_up(unsigned int cpu)
                 return rc;
 #endif
 
+#ifdef CONFIG_X86_64
+        /* Allocate node local memory for AP pdas */
+        WARN_ON(cpu == 0);
+        if (cpu > 0) {
+                rc = get_local_pda(cpu);
+                if (rc)
+                        return rc;
+        }
+#endif
+
+#ifdef CONFIG_X86_32
         init_gdt(cpu);
         per_cpu(current_task, cpu) = idle;
         irq_ctx_init(cpu);
+#else
+        cpu_pda(cpu)->pcurrent = idle;
+        clear_tsk_thread_flag(idle, TIF_FORK);
+#endif
         xen_setup_timer(cpu);
+        xen_init_lock_cpu(cpu);
+
+        per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 
         /* make sure interrupts start blocked */
         per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1;
@@ -306,20 +324,18 @@ int __cpuinit xen_cpu_up(unsigned int cpu)
         if (rc)
                 return rc;
 
-        smp_store_cpu_info(cpu);
-        set_cpu_sibling_map(cpu);
-        /* This must be done before setting cpu_online_map */
-        wmb();
-
-        cpu_set(cpu, cpu_online_map);
-
         rc = HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL);
         BUG_ON(rc);
 
+        while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
+                HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+                barrier();
+        }
+
         return 0;
 }
 
-void xen_smp_cpus_done(unsigned int max_cpus)
+static void xen_smp_cpus_done(unsigned int max_cpus)
 {
 }
 
@@ -335,12 +351,12 @@ static void stop_self(void *v)
         BUG();
 }
 
-void xen_smp_send_stop(void)
+static void xen_smp_send_stop(void)
 {
         smp_call_function(stop_self, NULL, 0);
 }
 
-void xen_smp_send_reschedule(int cpu)
+static void xen_smp_send_reschedule(int cpu)
 {
         xen_send_IPI_one(cpu, XEN_RESCHEDULE_VECTOR);
 }
@@ -351,18 +367,18 @@ static void xen_send_IPI_mask(cpumask_t mask, enum ipi_vector vector)
 
         cpus_and(mask, mask, cpu_online_map);
 
-        for_each_cpu_mask(cpu, mask)
+        for_each_cpu_mask_nr(cpu, mask)
                 xen_send_IPI_one(cpu, vector);
 }
 
-void xen_smp_send_call_function_ipi(cpumask_t mask)
+static void xen_smp_send_call_function_ipi(cpumask_t mask)
 {
         int cpu;
 
         xen_send_IPI_mask(mask, XEN_CALL_FUNCTION_VECTOR);
 
         /* Make sure other vcpus get a chance to run if they need to. */
-        for_each_cpu_mask(cpu, mask) {
+        for_each_cpu_mask_nr(cpu, mask) {
                 if (xen_vcpu_stolen(cpu)) {
                         HYPERVISOR_sched_op(SCHEDOP_yield, 0);
                         break;
@@ -370,7 +386,7 @@ void xen_smp_send_call_function_ipi(cpumask_t mask)
         }
 }
 
-void xen_smp_send_call_function_single_ipi(int cpu)
+static void xen_smp_send_call_function_single_ipi(int cpu)
 {
         xen_send_IPI_mask(cpumask_of_cpu(cpu), XEN_CALL_FUNCTION_SINGLE_VECTOR);
 }
@@ -379,7 +395,11 @@ static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id)
 {
         irq_enter();
         generic_smp_call_function_interrupt();
+#ifdef CONFIG_X86_32
         __get_cpu_var(irq_stat).irq_call_count++;
+#else
+        add_pda(irq_call_count, 1);
+#endif
         irq_exit();
 
         return IRQ_HANDLED;
@@ -389,8 +409,196 @@ static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id)
 {
         irq_enter();
         generic_smp_call_function_single_interrupt();
+#ifdef CONFIG_X86_32
         __get_cpu_var(irq_stat).irq_call_count++;
+#else
+        add_pda(irq_call_count, 1);
+#endif
         irq_exit();
 
         return IRQ_HANDLED;
 }
+
+struct xen_spinlock {
+        unsigned char lock;             /* 0 -> free; 1 -> locked */
+        unsigned short spinners;        /* count of waiting cpus */
+};
+
+static int xen_spin_is_locked(struct raw_spinlock *lock)
+{
+        struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+        return xl->lock != 0;
+}
+
+static int xen_spin_is_contended(struct raw_spinlock *lock)
+{
+        struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+        /* Not strictly true; this is only the count of contended
+           lock-takers entering the slow path. */
+        return xl->spinners != 0;
+}
+
+static int xen_spin_trylock(struct raw_spinlock *lock)
+{
+        struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+        u8 old = 1;
+
+        asm("xchgb %b0,%1"
+            : "+q" (old), "+m" (xl->lock) : : "memory");
+
+        return old == 0;
+}
+
+static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
+static DEFINE_PER_CPU(struct xen_spinlock *, lock_spinners);
+
+static inline void spinning_lock(struct xen_spinlock *xl)
+{
+        __get_cpu_var(lock_spinners) = xl;
+        wmb();                  /* set lock of interest before count */
+        asm(LOCK_PREFIX " incw %0"
+            : "+m" (xl->spinners) : : "memory");
+}
+
+static inline void unspinning_lock(struct xen_spinlock *xl)
+{
+        asm(LOCK_PREFIX " decw %0"
+            : "+m" (xl->spinners) : : "memory");
+        wmb();                  /* decrement count before clearing lock */
+        __get_cpu_var(lock_spinners) = NULL;
+}
+
+static noinline int xen_spin_lock_slow(struct raw_spinlock *lock)
+{
+        struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+        int irq = __get_cpu_var(lock_kicker_irq);
+        int ret;
+
+        /* If kicker interrupts not initialized yet, just spin */
+        if (irq == -1)
+                return 0;
+
+        /* announce we're spinning */
+        spinning_lock(xl);
+
+        /* clear pending */
+        xen_clear_irq_pending(irq);
+
+        /* check again make sure it didn't become free while
+           we weren't looking  */
+        ret = xen_spin_trylock(lock);
+        if (ret)
+                goto out;
+
+        /* block until irq becomes pending */
+        xen_poll_irq(irq);
+        kstat_this_cpu.irqs[irq]++;
+
+out:
+        unspinning_lock(xl);
+        return ret;
+}
+
+static void xen_spin_lock(struct raw_spinlock *lock)
+{
+        struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+        int timeout;
+        u8 oldval;
+
+        do {
+                timeout = 1 << 10;
+
+                asm("1: xchgb %1,%0\n"
+                    "   testb %1,%1\n"
+                    "   jz 3f\n"
+                    "2: rep;nop\n"
+                    "   cmpb $0,%0\n"
+                    "   je 1b\n"
+                    "   dec %2\n"
+                    "   jnz 2b\n"
+                    "3:\n"
+                    : "+m" (xl->lock), "=q" (oldval), "+r" (timeout)
+                    : "1" (1)
+                    : "memory");
+
+        } while (unlikely(oldval != 0 && !xen_spin_lock_slow(lock)));
+}
+
+static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
+{
+        int cpu;
+
+        for_each_online_cpu(cpu) {
+                /* XXX should mix up next cpu selection */
+                if (per_cpu(lock_spinners, cpu) == xl) {
+                        xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
+                        break;
+                }
+        }
+}
+
+static void xen_spin_unlock(struct raw_spinlock *lock)
+{
+        struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+        smp_wmb();              /* make sure no writes get moved after unlock */
+        xl->lock = 0;           /* release lock */
+
+        /* make sure unlock happens before kick */
+        barrier();
+
+        if (unlikely(xl->spinners))
+                xen_spin_unlock_slow(xl);
+}
+
+static __cpuinit void xen_init_lock_cpu(int cpu)
+{
+        int irq;
+        const char *name;
+
+        name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
+        irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
+                                     cpu,
+                                     xen_reschedule_interrupt,
+                                     IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+                                     name,
+                                     NULL);
+
+        if (irq >= 0) {
+                disable_irq(irq); /* make sure it's never delivered */
+                per_cpu(lock_kicker_irq, cpu) = irq;
+        }
+
+        printk("cpu %d spinlock event irq %d\n", cpu, irq);
+}
+
+static void __init xen_init_spinlocks(void)
+{
+        pv_lock_ops.spin_is_locked = xen_spin_is_locked;
+        pv_lock_ops.spin_is_contended = xen_spin_is_contended;
+        pv_lock_ops.spin_lock = xen_spin_lock;
+        pv_lock_ops.spin_trylock = xen_spin_trylock;
+        pv_lock_ops.spin_unlock = xen_spin_unlock;
+}
+
+static const struct smp_ops xen_smp_ops __initdata = {
+        .smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
+        .smp_prepare_cpus = xen_smp_prepare_cpus,
+        .cpu_up = xen_cpu_up,
+        .smp_cpus_done = xen_smp_cpus_done,
+
+        .smp_send_stop = xen_smp_send_stop,
+        .smp_send_reschedule = xen_smp_send_reschedule,
+
+        .send_call_func_ipi = xen_smp_send_call_function_ipi,
+        .send_call_func_single_ipi = xen_smp_send_call_function_single_ipi,
+};
+
+void __init xen_smp_init(void)
+{
+        smp_ops = xen_smp_ops;
+        xen_fill_possible_map();
+        xen_init_spinlocks();
+}
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 251669a932d4..2a234db5949b 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -38,8 +38,11 @@ void xen_post_suspend(int suspend_cancelled)
                 xen_cpu_initialized_map = cpu_online_map;
 #endif
                 xen_vcpu_restore();
-                xen_timer_resume();
         }
 
 }
 
+void xen_arch_resume(void)
+{
+        /* nothing */
+}
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm_32.S
index 2497a30f41de..2497a30f41de 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm_32.S
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
new file mode 100644
index 000000000000..7f58304fafb3
--- /dev/null
+++ b/arch/x86/xen/xen-asm_64.S
@@ -0,0 +1,271 @@
+/*
+        Asm versions of Xen pv-ops, suitable for either direct use or inlining.
+        The inline versions are the same as the direct-use versions, with the
+        pre- and post-amble chopped off.
+
+        This code is encoded for size rather than absolute efficiency,
+        with a view to being able to inline as much as possible.
+
+        We only bother with direct forms (ie, vcpu in pda) of the operations
+        here; the indirect forms are better handled in C, since they're
+        generally too large to inline anyway.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/processor-flags.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+
+#include <xen/interface/xen.h>
+
+#define RELOC(x, v)     .globl x##_reloc; x##_reloc=v
+#define ENDPATCH(x)     .globl x##_end; x##_end=.
+
+/* Pseudo-flag used for virtual NMI, which we don't implement yet */
+#define XEN_EFLAGS_NMI  0x80000000
+
+#if 0
+#include <asm/percpu.h>
+
+/*
+        Enable events.  This clears the event mask and tests the pending
+        event status with one and operation.  If there are pending
+        events, then enter the hypervisor to get them handled.
+ */
+ENTRY(xen_irq_enable_direct)
+        /* Unmask events */
+        movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+
+        /* Preempt here doesn't matter because that will deal with
+           any pending interrupts.  The pending check may end up being
+           run on the wrong CPU, but that doesn't hurt. */
+
+        /* Test for pending */
+        testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+        jz 1f
+
+2:      call check_events
+1:
+ENDPATCH(xen_irq_enable_direct)
+        ret
+        ENDPROC(xen_irq_enable_direct)
+        RELOC(xen_irq_enable_direct, 2b+1)
+
+/*
+        Disabling events is simply a matter of making the event mask
+        non-zero.
+ */
+ENTRY(xen_irq_disable_direct)
+        movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+ENDPATCH(xen_irq_disable_direct)
+        ret
+        ENDPROC(xen_irq_disable_direct)
+        RELOC(xen_irq_disable_direct, 0)
+
+/*
+        (xen_)save_fl is used to get the current interrupt enable status.
+        Callers expect the status to be in X86_EFLAGS_IF, and other bits
+        may be set in the return value.  We take advantage of this by
+        making sure that X86_EFLAGS_IF has the right value (and other bits
+        in that byte are 0), but other bits in the return value are
+        undefined.  We need to toggle the state of the bit, because
+        Xen and x86 use opposite senses (mask vs enable).
+ */
+ENTRY(xen_save_fl_direct)
+        testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+        setz %ah
+        addb %ah,%ah
+ENDPATCH(xen_save_fl_direct)
+        ret
+        ENDPROC(xen_save_fl_direct)
+        RELOC(xen_save_fl_direct, 0)
+
+/*
+        In principle the caller should be passing us a value return
+        from xen_save_fl_direct, but for robustness sake we test only
+        the X86_EFLAGS_IF flag rather than the whole byte. After
+        setting the interrupt mask state, it checks for unmasked
+        pending events and enters the hypervisor to get them delivered
+        if so.
+ */
+ENTRY(xen_restore_fl_direct)
+        testb $X86_EFLAGS_IF>>8, %ah
+        setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+        /* Preempt here doesn't matter because that will deal with
+           any pending interrupts.  The pending check may end up being
+           run on the wrong CPU, but that doesn't hurt. */
+
+        /* check for unmasked and pending */
+        cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+        jz 1f
+2:      call check_events
+1:
+ENDPATCH(xen_restore_fl_direct)
+        ret
+        ENDPROC(xen_restore_fl_direct)
+        RELOC(xen_restore_fl_direct, 2b+1)
+
+
+/*
+        Force an event check by making a hypercall,
+        but preserve regs before making the call.
+ */
+check_events:
+        push %rax
+        push %rcx
+        push %rdx
+        push %rsi
+        push %rdi
+        push %r8
+        push %r9
+        push %r10
+        push %r11
+        call force_evtchn_callback
+        pop %r11
+        pop %r10
+        pop %r9
+        pop %r8
+        pop %rdi
+        pop %rsi
+        pop %rdx
+        pop %rcx
+        pop %rax
+        ret
+#endif
+
+ENTRY(xen_adjust_exception_frame)
+        mov 8+0(%rsp),%rcx
+        mov 8+8(%rsp),%r11
+        ret $16
+
+hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
+/*
+        Xen64 iret frame:
+
+        ss
+        rsp
+        rflags
+        cs
+        rip             <-- standard iret frame
+
+        flags
+
+        rcx             }
+        r11             }<-- pushed by hypercall page
+rsp ->  rax             }
+ */
+ENTRY(xen_iret)
+        pushq $0
+1:      jmp hypercall_iret
+ENDPATCH(xen_iret)
+RELOC(xen_iret, 1b+1)
+
+/*
+        sysexit is not used for 64-bit processes, so it's
+        only ever used to return to 32-bit compat userspace.
+ */
+ENTRY(xen_sysexit)
+        pushq $__USER32_DS
+        pushq %rcx
+        pushq $X86_EFLAGS_IF
+        pushq $__USER32_CS
+        pushq %rdx
+
+        pushq $0
+1:      jmp hypercall_iret
+ENDPATCH(xen_sysexit)
+RELOC(xen_sysexit, 1b+1)
+
+ENTRY(xen_sysret64)
+        /* We're already on the usermode stack at this point, but still
+           with the kernel gs, so we can easily switch back */
+        movq %rsp, %gs:pda_oldrsp
+        movq %gs:pda_kernelstack,%rsp
+
+        pushq $__USER_DS
+        pushq %gs:pda_oldrsp
+        pushq %r11
+        pushq $__USER_CS
+        pushq %rcx
+
+        pushq $VGCF_in_syscall
+1:      jmp hypercall_iret
+ENDPATCH(xen_sysret64)
+RELOC(xen_sysret64, 1b+1)
+
+ENTRY(xen_sysret32)
+        /* We're already on the usermode stack at this point, but still
+           with the kernel gs, so we can easily switch back */
+        movq %rsp, %gs:pda_oldrsp
+        movq %gs:pda_kernelstack, %rsp
+
+        pushq $__USER32_DS
+        pushq %gs:pda_oldrsp
+        pushq %r11
+        pushq $__USER32_CS
+        pushq %rcx
+
+        pushq $VGCF_in_syscall
+1:      jmp hypercall_iret
+ENDPATCH(xen_sysret32)
+RELOC(xen_sysret32, 1b+1)
+
+/*
+        Xen handles syscall callbacks much like ordinary exceptions,
+        which means we have:
+         - kernel gs
+         - kernel rsp
+         - an iret-like stack frame on the stack (including rcx and r11):
+                ss
+                rsp
+                rflags
+                cs
+                rip
+                r11
+        rsp->   rcx
+
+        In all the entrypoints, we undo all that to make it look
+        like a CPU-generated syscall/sysenter and jump to the normal
+        entrypoint.
+ */
+
+.macro undo_xen_syscall
+        mov 0*8(%rsp),%rcx
+        mov 1*8(%rsp),%r11
+        mov 5*8(%rsp),%rsp
+.endm
+
+/* Normal 64-bit system call target */
+ENTRY(xen_syscall_target)
+        undo_xen_syscall
+        jmp system_call_after_swapgs
+ENDPROC(xen_syscall_target)
+
+#ifdef CONFIG_IA32_EMULATION
+
+/* 32-bit compat syscall target */
+ENTRY(xen_syscall32_target)
+        undo_xen_syscall
+        jmp ia32_cstar_target
+ENDPROC(xen_syscall32_target)
+
+/* 32-bit compat sysenter target */
+ENTRY(xen_sysenter_target)
+        undo_xen_syscall
+        jmp ia32_sysenter_target
+ENDPROC(xen_sysenter_target)
+
+#else /* !CONFIG_IA32_EMULATION */
+
+ENTRY(xen_syscall32_target)
+ENTRY(xen_sysenter_target)
+        lea 16(%rsp), %rsp      /* strip %rcx,%r11 */
+        mov $-ENOSYS, %rax
+        pushq $VGCF_in_syscall
+        jmp hypercall_iret
+ENDPROC(xen_syscall32_target)
+ENDPROC(xen_sysenter_target)
+
+#endif  /* CONFIG_IA32_EMULATION */
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 7c0cf6320a0a..63d49a523ed3 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -5,15 +5,24 @@
 
 #include <linux/elfnote.h>
 #include <linux/init.h>
+
 #include <asm/boot.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
 #include <xen/interface/elfnote.h>
 #include <asm/xen/interface.h>
 
         __INIT
 ENTRY(startup_xen)
-        movl %esi,xen_start_info
         cld
-        movl $(init_thread_union+THREAD_SIZE),%esp
+#ifdef CONFIG_X86_32
+        mov %esi,xen_start_info
+        mov $init_thread_union+THREAD_SIZE,%esp
+#else
+        mov %rsi,xen_start_info
+        mov $init_thread_union+THREAD_SIZE,%rsp
+#endif
         jmp xen_start_kernel
 
         __FINIT
@@ -21,21 +30,26 @@ ENTRY(startup_xen)
 .pushsection .text
         .align PAGE_SIZE_asm
 ENTRY(hypercall_page)
-        .skip 0x1000
+        .skip PAGE_SIZE_asm
 .popsection
 
         ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
         ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION,  .asciz "2.6")
         ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,    .asciz "xen-3.0")
-        ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      .long  __PAGE_OFFSET)
-        ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,          .long  startup_xen)
-        ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long  hypercall_page)
+#ifdef CONFIG_X86_32
+        ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      _ASM_PTR __PAGE_OFFSET)
+#else
+        ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      _ASM_PTR __START_KERNEL_map)
+#endif
+        ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,          _ASM_PTR startup_xen)
+        ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, _ASM_PTR hypercall_page)
         ELFNOTE(Xen, XEN_ELFNOTE_FEATURES,       .asciz "!writable_page_tables|pae_pgdir_above_4gb")
         ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE,       .asciz "yes")
         ELFNOTE(Xen, XEN_ELFNOTE_LOADER,         .asciz "generic")
         ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID,
                 .quad _PAGE_PRESENT; .quad _PAGE_PRESENT)
         ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long 1)
-        ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW,   .long __HYPERVISOR_VIRT_START)
+        ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW,   _ASM_PTR __HYPERVISOR_VIRT_START)
+        ELFNOTE(Xen, XEN_ELFNOTE_PADDR_OFFSET,   _ASM_PTR 0)
 
 #endif /*CONFIG_XEN */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 6f4b1045c1c2..dd3c23152a2e 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -26,6 +26,7 @@ char * __init xen_memory_setup(void);
 void __init xen_arch_setup(void);
 void __init xen_init_IRQ(void);
 void xen_enable_sysenter(void);
+void xen_enable_syscall(void);
 void xen_vcpu_restore(void);
 
 void __init xen_build_dynamic_phys_to_machine(void);
@@ -37,7 +38,6 @@ void __init xen_time_init(void);
 unsigned long xen_get_wallclock(void);
 int xen_set_wallclock(unsigned long time);
 unsigned long long xen_sched_clock(void);
-void xen_timer_resume(void);
 
 irqreturn_t xen_debug_interrupt(int irq, void *dev_id);
 
@@ -45,20 +45,15 @@ bool xen_vcpu_stolen(int vcpu);
 
 void xen_mark_init_mm_pinned(void);
 
-void __init xen_fill_possible_map(void);
-
 void __init xen_setup_vcpu_info_placement(void);
-void xen_smp_prepare_boot_cpu(void);
-void xen_smp_prepare_cpus(unsigned int max_cpus);
-int xen_cpu_up(unsigned int cpu);
-void xen_smp_cpus_done(unsigned int max_cpus);
 
-void xen_smp_send_stop(void);
-void xen_smp_send_reschedule(int cpu);
-void xen_smp_send_call_function_ipi(cpumask_t mask);
-void xen_smp_send_call_function_single_ipi(int cpu);
+#ifdef CONFIG_SMP
+void xen_smp_init(void);
 
 extern cpumask_t xen_cpu_initialized_map;
+#else
+static inline void xen_smp_init(void) {}
+#endif
 
 
 /* Declare an asm function, along with symbols needed to make it
@@ -73,7 +68,11 @@ DECL_ASM(void, xen_irq_disable_direct, void);
 DECL_ASM(unsigned long, xen_save_fl_direct, void);
 DECL_ASM(void, xen_restore_fl_direct, unsigned long);
 
+/* These are not functions, and cannot be called normally */
 void xen_iret(void);
 void xen_sysexit(void);
+void xen_sysret32(void);
+void xen_sysret64(void);
+void xen_adjust_exception_frame(void);
 
 #endif /* XEN_OPS_H */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 9fc8551a1cf6..02e417d3d8e9 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -194,8 +194,8 @@ config HOTPLUG
         plugged into slots found on all modern laptop computers.  Another
         example, used on modern desktops as well as laptops, is USB.
 
-        Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-        software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+        Enable HOTPLUG and build a modular kernel.  Get agent software
+        (from <http://linux-hotplug.sourceforge.net/>) and install it.
         Then your kernel will automatically call out to a user mode "policy
         agent" (/sbin/hotplug) to load modules and set up software needed
         to use devices as you hotplug them.
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 5e6d75c9f92b..a00359e8f7a8 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -16,6 +16,7 @@
 
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/proc_fs.h>
 #include <linux/screen_info.h>
 #include <linux/bootmem.h>
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index f3e16efcd47a..ac15ecbdf919 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -49,7 +49,7 @@ asmlinkage long xtensa_pipe(int __user *userfds)
         int fd[2];
         int error;
 
-        error = do_pipe(fd);
+        error = do_pipe_flags(fd, 0);
         if (!error) {
                 if (copy_to_user(userfds, fd, 2 * sizeof(int)))
                         error = -EFAULT;
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 81d0560eaea2..34163cfaaffc 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -280,36 +280,9 @@ void free_initmem(void)
                (&__init_end - &__init_begin) >> 10);
 }
 
-void show_mem(void)
-{
-        int i, free = 0, total = 0, reserved = 0;
-        int shared = 0, cached = 0;
-
-        printk("Mem-info:\n");
-        show_free_areas();
-        printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-        i = max_mapnr;
-        while (i-- > 0) {
-                total++;
-                if (PageReserved(mem_map+i))
-                        reserved++;
-                else if (PageSwapCache(mem_map+i))
-                        cached++;
-                else if (!page_count(mem_map + i))
-                        free++;
-                else
-                        shared += page_count(mem_map + i) - 1;
-        }
-        printk("%d pages of RAM\n", total);
-        printk("%d reserved pages\n", reserved);
-        printk("%d pages shared\n", shared);
-        printk("%d pages swap cached\n",cached);
-        printk("%d free pages\n", free);
-}
-
 struct kmem_cache *pgtable_cache __read_mostly;
 
-static void pgd_ctor(struct kmem_cache *cache, void* addr)
+static void pgd_ctor(void* addr)
 {
         pte_t* ptep = (pte_t*)addr;
         int i;