MN10300: Fix up the IRQ names for the on-chip serial ports

Fix up the IRQ names for the MN10300 on-chip serial ports in the driver as
request_interrupt() no longer allows names containing slashes, giving a warning
like the following if one is encountered:

	------------[ cut here ]------------
	WARNING: at fs/proc/generic.c:323 __xlate_proc_name+0x62/0x7c()
	name 'ttySM0/Rx'

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 11 insertions, 11 deletions

diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 9d49073e827a..db509dd80565 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -156,17 +156,17 @@ struct mn10300_serial_port mn10300_serial_port_sif0 = {
         ._intr          = &SC0ICR,
         ._rxb           = &SC0RXB,
         ._txb           = &SC0TXB,
-        .rx_name        = "ttySM0/Rx",
-        .tx_name        = "ttySM0/Tx",
+        .rx_name        = "ttySM0:Rx",
+        .tx_name        = "ttySM0:Tx",
 #ifdef CONFIG_MN10300_TTYSM0_TIMER8
-        .tm_name        = "ttySM0/Timer8",
+        .tm_name        = "ttySM0:Timer8",
         ._tmxmd         = &TM8MD,
         ._tmxbr         = &TM8BR,
         ._tmicr         = &TM8ICR,
         .tm_irq         = TM8IRQ,
         .div_timer      = MNSCx_DIV_TIMER_16BIT,
 #else /* CONFIG_MN10300_TTYSM0_TIMER2 */
-        .tm_name        = "ttySM0/Timer2",
+        .tm_name        = "ttySM0:Timer2",
         ._tmxmd         = &TM2MD,
         ._tmxbr         = (volatile u16 *) &TM2BR,
         ._tmicr         = &TM2ICR,
@@ -209,17 +209,17 @@ struct mn10300_serial_port mn10300_serial_port_sif1 = {
         ._intr          = &SC1ICR,
         ._rxb           = &SC1RXB,
         ._txb           = &SC1TXB,
-        .rx_name        = "ttySM1/Rx",
-        .tx_name        = "ttySM1/Tx",
+        .rx_name        = "ttySM1:Rx",
+        .tx_name        = "ttySM1:Tx",
 #ifdef CONFIG_MN10300_TTYSM1_TIMER9
-        .tm_name        = "ttySM1/Timer9",
+        .tm_name        = "ttySM1:Timer9",
         ._tmxmd         = &TM9MD,
         ._tmxbr         = &TM9BR,
         ._tmicr         = &TM9ICR,
         .tm_irq         = TM9IRQ,
         .div_timer      = MNSCx_DIV_TIMER_16BIT,
 #else /* CONFIG_MN10300_TTYSM1_TIMER3 */
-        .tm_name        = "ttySM1/Timer3",
+        .tm_name        = "ttySM1:Timer3",
         ._tmxmd         = &TM3MD,
         ._tmxbr         = (volatile u16 *) &TM3BR,
         ._tmicr         = &TM3ICR,
@@ -260,9 +260,9 @@ struct mn10300_serial_port mn10300_serial_port_sif2 = {
         .uart.lock      =
         __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock),
         .name           = "ttySM2",
-        .rx_name        = "ttySM2/Rx",
-        .tx_name        = "ttySM2/Tx",
-        .tm_name        = "ttySM2/Timer10",
+        .rx_name        = "ttySM2:Rx",
+        .tx_name        = "ttySM2:Tx",
+        .tm_name        = "ttySM2:Timer10",
         ._iobase        = &SC2CTR,
         ._control       = &SC2CTR,
         ._status        = &SC2STR,