[ARM] colibri: fix support for DM9000 ethernet device

Two changes are necessary to enable proper operation of the DM9000 device with
the Colibri PXA 270 board: firstly, the IRQ type needs to be configured for
rising edge interrupts, and secondly this configuration needs to be
communicated through to the DM9000.

[akpm@linux-foundation.org: remove set_irq_type() call as per ben-linux request]
Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk>
Cc: Daniel Mack <daniel@caiaq.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 1 insertions, 2 deletions

diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 43bf5a183e90..574839d7c132 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -98,7 +98,7 @@ static struct resource dm9000_resources[] = {
         [2] = {
                 .start  = COLIBRI_ETH_IRQ,
                 .end    = COLIBRI_ETH_IRQ,
-                .flags  = IORESOURCE_IRQ,
+                .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
         },
 };
 
@@ -119,7 +119,6 @@ static void __init colibri_init(void)
         /* DM9000 LAN */
         pxa_gpio_mode(GPIO78_nCS_2_MD);
         pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-        set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
 
         platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }