[MIPS] XXS1500 code style cleanup

Fix several errors and warnings given by checkpatch.pl:

- use of C99 // comments;

- using simple_strtol() where strict_strtol() could be used.

In addition to these changes, also do the following:

- remove needless parentheses;

- remove unneeded numeric literal type cast;

- insert spaces between operator and its operands;

- remove excess new lines;

- remove space after the type cast's closing parenthesis;

- insert missing space before closing brace in the structure initializer;

- fix typos, capitalize acronyms, etc. in the comments;

- update MontaVista copyright;

- remove Pete Popov's old email address...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

4 files changed, 26 insertions, 29 deletions

diff --git a/arch/mips/au1000/xxs1500/Makefile b/arch/mips/au1000/xxs1500/Makefile
index 44d7f7056ae7..db3c526f64d8 100644
--- a/arch/mips/au1000/xxs1500/Makefile
+++ b/arch/mips/au1000/xxs1500/Makefile
@@ -1,7 +1,6 @@
 #
 #  Copyright 2003 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#       ppopov@mvista.com or source@mvista.com
+#  Author: MontaVista Software, Inc. <source@mvista.com>
 #
 # Makefile for MyCable XXS1500 board.
 #
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index 79d1798621bf..4c587acac5c3 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -1,7 +1,6 @@
 /*
- * Copyright 2000-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -39,40 +38,40 @@ void __init board_setup(void)
 {
         u32 pin_func;
 
-        // set multiple use pins (UART3/GPIO) to UART (it's used as UART too)
-        pin_func = au_readl(SYS_PINFUNC) & (u32)(~SYS_PF_UR3);
+        /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
+        pin_func  = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
         pin_func |= SYS_PF_UR3;
         au_writel(pin_func, SYS_PINFUNC);
 
-        // enable UART
-        au_writel(0x01, UART3_ADDR+UART_MOD_CNTRL); // clock enable (CE)
+        /* Enable UART */
+        au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
         mdelay(10);
-        au_writel(0x03, UART3_ADDR+UART_MOD_CNTRL); // CE and "enable"
+        au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
         mdelay(10);
 
-        // enable DTR = USB power up
-        au_writel(0x01, UART3_ADDR+UART_MCR); //? UART_MCR_DTR is 0x01???
+        /* Enable DTR = USB power up */
+        au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
 
 #ifdef CONFIG_PCMCIA_XXS1500
-        /* setup pcmcia signals */
+        /* Setup PCMCIA signals */
         au_writel(0, SYS_PININPUTEN);
 
-        /* gpio 0, 1, and 4 are inputs */
-        au_writel(1 | (1<<1) | (1<<4), SYS_TRIOUTCLR);
+        /* GPIO 0, 1, and 4 are inputs */
+        au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR);
 
-        /* enable GPIO2 if not already enabled */
+        /* Enable GPIO2 if not already enabled */
         au_writel(1, GPIO2_ENABLE);
-        /* gpio2 208/9/10/11 are inputs */
-        au_writel((1<<8) | (1<<9) | (1<<10) | (1<<11), GPIO2_DIR);
+        /* GPIO2 208/9/10/11 are inputs */
+        au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR);
 
-        /* turn off power */
-        au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), GPIO2_OUTPUT);
+        /* Turn off power */
+        au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30),
+                  GPIO2_OUTPUT);
 #endif
 
-
 #ifdef CONFIG_PCI
 #if defined(__MIPSEB__)
-        au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+        au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
 #else
         au_writel(0xf, Au1500_PCI_CFG);
 #endif
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index 24fc6e132dc0..b849bf501c04 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -2,9 +2,8 @@
  * BRIEF MODULE DESCRIPTION
  *      XXS1500 board setup
  *
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -45,8 +44,8 @@ void __init prom_init(void)
         unsigned long memsize;
 
         prom_argc = fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg2;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg2;
 
         prom_init_cmdline();
 
@@ -54,6 +53,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = simple_strtol(memsize_str, NULL, 0);
+                memsize = strict_strtol(memsize_str, 0, NULL);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index dd6e3d1eb4d4..edf06ed11870 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -31,7 +31,7 @@
 #include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-        { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+        { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
         { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
         { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
         { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },