Merge branch 'features/imx3' of git://git.pengutronix.de/git/imx/linux-2.6 into next/soc

* 'features/imx3' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM: mx3: Setup AIPS registers
  ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI

Conflicts:
	arch/arm/mach-imx/mm-imx3.c

6 files changed, 78 insertions, 2 deletions

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 55db9c488f2b..f4b6fb0730cb 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -8,8 +8,8 @@ obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-imx3.o
 
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
 
diff --git a/arch/arm/mach-imx/crmregs-imx31.h b/arch/arm/mach-imx/crmregs-imx31.h
index 37a8a07beda3..9a34d393b813 100644
--- a/arch/arm/mach-imx/crmregs-imx31.h
+++ b/arch/arm/mach-imx/crmregs-imx31.h
@@ -64,6 +64,7 @@
 #define MXC_CCM_CCMR_SSI2S_MASK                 (0x3 << 21)
 #define MXC_CCM_CCMR_LPM_OFFSET                 14
 #define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
+#define MXC_CCM_CCMR_LPM_WAIT_MX35              (0x1 << 14)
 #define MXC_CCM_CCMR_FIRS_OFFSET                11
 #define MXC_CCM_CCMR_FIRS_MASK                  (0x3 << 11)
 #define MXC_CCM_CCMR_UPE                        (1 << 9)
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 8404ee72555a..b23bd3f09a60 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -34,6 +34,8 @@ static void imx3_idle(void)
 {
         unsigned long reg = 0;
 
+        mx3_cpu_lp_set(MX3_WAIT);
+
         __asm__ __volatile__(
                 /* disable I and D cache */
                 "mrc p15, 0, %0, c1, c0, 0\n"
@@ -173,6 +175,9 @@ void __init imx31_soc_init(void)
         }
 
         imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
+
+        imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
+        imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));
 }
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c
new file mode 100644
index 000000000000..b3752439632e
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx3.c
@@ -0,0 +1,37 @@
+/*
+ *  Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/io.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+#include "crmregs-imx3.h"
+
+/*
+ * Set cpu low power mode before WFI instruction. This function is called
+ * mx3 because it can be used for mx31 and mx35.
+ * Currently only WAIT_MODE is supported.
+ */
+void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
+{
+        int reg = __raw_readl(MXC_CCM_CCMR);
+        reg &= ~MXC_CCM_CCMR_LPM_MASK;
+
+        switch (mode) {
+        case MX3_WAIT:
+                if (cpu_is_mx35())
+                        reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
+                __raw_writel(reg, MXC_CCM_CCMR);
+                break;
+        default:
+                pr_err("Unknown cpu power mode: %d\n", mode);
+                return;
+        }
+}
diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c
index f5b7e0fa237f..220dd6f93126 100644
--- a/arch/arm/plat-mxc/cpu.c
+++ b/arch/arm/plat-mxc/cpu.c
@@ -1,5 +1,6 @@
 
 #include <linux/module.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 
 unsigned int __mxc_cpu_type;
@@ -18,3 +19,26 @@ void imx_print_silicon_rev(const char *cpu, int srev)
                 pr_info("CPU identified as %s, silicon rev %d.%d\n",
                                 cpu, (srev >> 4) & 0xf, srev & 0xf);
 }
+
+void __init imx_set_aips(void __iomem *base)
+{
+        unsigned int reg;
+/*
+ * Set all MPROTx to be non-bufferable, trusted for R/W,
+ * not forced to user-mode.
+ */
+        __raw_writel(0x77777777, base + 0x0);
+        __raw_writel(0x77777777, base + 0x4);
+
+/*
+ * Set all OPACRx to be non-bufferable, to not require
+ * supervisor privilege level for access, allow for
+ * write access and untrusted master access.
+ */
+        __raw_writel(0x0, base + 0x40);
+        __raw_writel(0x0, base + 0x44);
+        __raw_writel(0x0, base + 0x48);
+        __raw_writel(0x0, base + 0x4C);
+        reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+        __raw_writel(reg, base + 0x50);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 1bf0df81bdc6..7c24e5ab7d50 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -75,6 +75,7 @@ extern void mxc_restart(char, const char *);
 extern void mxc_arch_reset_init(void __iomem *);
 extern int mx53_revision(void);
 extern int mx53_display_revision(void);
+extern void imx_set_aips(void __iomem *);
 
 enum mxc_cpu_pwr_mode {
         WAIT_CLOCKED,           /* wfi only */
@@ -84,6 +85,14 @@ enum mxc_cpu_pwr_mode {
         STOP_POWER_OFF,         /* STOP + SRPG */
 };
 
+enum mx3_cpu_pwr_mode {
+        MX3_RUN,
+        MX3_WAIT,
+        MX3_DOZE,
+        MX3_SLEEP,
+};
+
+extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
 extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
 extern void imx_print_silicon_rev(const char *cpu, int srev);