[ARM] 4603/1: KS8695: debugfs interface to view pin state

This patch adds a debug interface (if CONFIG_DEBUG_FS is selected) to
display the basic configuration and current state of the GPIO pins on
the Kendin/Micrel KS8695 processor.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 83 insertions, 0 deletions

diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index b1aa3cb3d4a3..5e46191c0af9 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -20,6 +20,8 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 #include <linux/module.h>
 
 #include <asm/io.h>
@@ -216,3 +218,84 @@ int irq_to_gpio(unsigned int irq)
         return (irq - KS8695_IRQ_EXTERN0);
 }
 EXPORT_SYMBOL(irq_to_gpio);
+
+
+/* .... Debug interface ..................................................... */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int ks8695_gpio_show(struct seq_file *s, void *unused)
+{
+        unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+        unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
+        unsigned long mode, ctrl, data;
+        int i;
+
+        mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+        ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+        data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+
+        seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
+
+        for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
+                seq_printf(s, "%i:\t", i);
+
+                seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input");
+
+                if (i <= KS8695_GPIO_3) {
+                        if (ctrl & enable[i]) {
+                                seq_printf(s, "EXT%i ", i);
+
+                                switch ((ctrl & intmask[i]) >> (4 * i)) {
+                                        case IOPC_TM_LOW:
+                                                seq_printf(s, "(Low)");         break;
+                                        case IOPC_TM_HIGH:
+                                                seq_printf(s, "(High)");        break;
+                                        case IOPC_TM_RISING:
+                                                seq_printf(s, "(Rising)");      break;
+                                        case IOPC_TM_FALLING:
+                                                seq_printf(s, "(Falling)");     break;
+                                        case IOPC_TM_EDGE:
+                                                seq_printf(s, "(Edges)");       break;
+                                }
+                        }
+                        else
+                                seq_printf(s, "GPIO\t");
+                }
+                else if (i <= KS8695_GPIO_5) {
+                        if (ctrl & enable[i])
+                                seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
+                        else
+                                seq_printf(s, "GPIO\t");
+                }
+                else
+                        seq_printf(s, "GPIO\t");
+
+                seq_printf(s, "\t");
+
+                seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0);
+        }
+        return 0;
+}
+
+static int ks8695_gpio_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, ks8695_gpio_show, NULL);
+}
+
+static const struct file_operations ks8695_gpio_operations = {
+        .open           = ks8695_gpio_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+};
+
+static int __init ks8695_gpio_debugfs_init(void)
+{
+        /* /sys/kernel/debug/ks8695_gpio */
+        (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
+        return 0;
+}
+postcore_initcall(ks8695_gpio_debugfs_init);
+
+#endif