Merge branch 'linus' into x86/threadinfo

605 files changed, 14708 insertions, 8214 deletions

diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index 4e1a8e2c4541..4759fe751aa1 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -13,6 +13,7 @@ NM := $(NM) -B
 LDFLAGS_vmlinux := -static -N #-relax
 CHECKFLAGS      += -D__alpha__ -m64
 cflags-y        := -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y        += $(call cc-option, -fno-jump-tables)
 
 cpuflags-$(CONFIG_ALPHA_EV4)            := -mcpu=ev4
 cpuflags-$(CONFIG_ALPHA_EV5)            := -mcpu=ev5
diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
index c0750291b44a..d9980d47ab81 100644
--- a/arch/alpha/kernel/core_t2.c
+++ b/arch/alpha/kernel/core_t2.c
@@ -74,6 +74,8 @@
 # define DBG(args)
 #endif
 
+DEFINE_SPINLOCK(t2_hae_lock);
+
 static volatile unsigned int t2_mcheck_any_expected;
 static volatile unsigned int t2_mcheck_last_taken;
 
diff --git a/arch/alpha/kernel/init_task.c b/arch/alpha/kernel/init_task.c
index 835d09a7b332..1f762189fa64 100644
--- a/arch/alpha/kernel/init_task.c
+++ b/arch/alpha/kernel/init_task.c
@@ -9,7 +9,6 @@
 
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 36ab22a7ea12..5cf45fc51343 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -71,6 +71,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i
 static void __init
 quirk_cypress(struct pci_dev *dev)
 {
+        /* The Notorious Cy82C693 chip.  */
+
+        /* The generic legacy mode IDE fixup in drivers/pci/probe.c
+           doesn't work correctly with the Cypress IDE controller as
+           it has non-standard register layout.  Fix that.  */
+        if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
+                dev->resource[2].start = dev->resource[3].start = 0;
+                dev->resource[2].end = dev->resource[3].end = 0;
+                dev->resource[2].flags = dev->resource[3].flags = 0;
+                if (PCI_FUNC(dev->devfn) == 2) {
+                        dev->resource[0].start = 0x170;
+                        dev->resource[0].end = 0x177;
+                        dev->resource[1].start = 0x376;
+                        dev->resource[1].end = 0x376;
+                }
+        }
+
         /* The Cypress bridge responds on the PCI bus in the address range
            0xffff0000-0xffffffff (conventional x86 BIOS ROM).  There is no
            way to turn this off.  The bridge also supports several extended
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index dc57790250d2..c778779007fc 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -447,7 +447,7 @@ struct unaligned_stat {
 
 
 /* Macro for exception fixup code to access integer registers.  */
-#define una_reg(r)  (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
+#define una_reg(r)  (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
 
 
 asmlinkage void
@@ -456,6 +456,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 {
         long error, tmp1, tmp2, tmp3, tmp4;
         unsigned long pc = regs->pc - 4;
+        unsigned long *_regs = regs->regs;
         const struct exception_table_entry *fixup;
 
         unaligned[0].count++;
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 67ea99ef6521..dd3fbd6766e1 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -33,10 +33,6 @@ __XScale_start:
                 bic     r0, r0, #0x1000         @ clear Icache
                 mcr     p15, 0, r0, c1, c0, 0
 
-#ifdef CONFIG_ARCH_COTULLA_IDP
-                mov     r7, #MACH_TYPE_COTULLA_IDP
-#endif
-
 #ifdef CONFIG_ARCH_IXP2000
                 mov     r1, #-1
                 mov     r0, #0xd6000000
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index ae21755872ed..d973c986f721 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -321,11 +321,42 @@ static void locomo_gpio_unmask_irq(unsigned int irq)
         locomo_writel(r, mapbase + LOCOMO_GIE);
 }
 
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+
+static int locomo_gpio_type(unsigned int irq, unsigned int type)
+{
+        unsigned int mask;
+        void __iomem *mapbase = get_irq_chip_data(irq);
+
+        mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
+
+        if (type == IRQT_PROBE) {
+                if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+                        return 0;
+                type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+        }
+
+        if (type & __IRQT_RISEDGE)
+                GPIO_IRQ_rising_edge |= mask;
+        else
+                GPIO_IRQ_rising_edge &= ~mask;
+        if (type & __IRQT_FALEDGE)
+                GPIO_IRQ_falling_edge |= mask;
+        else
+                GPIO_IRQ_falling_edge &= ~mask;
+        locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
+        locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
+
+        return 0;
+}
+
 static struct irq_chip locomo_gpio_chip = {
-        .name   = "LOCOMO-gpio",
-        .ack    = locomo_gpio_ack_irq,
-        .mask   = locomo_gpio_mask_irq,
-        .unmask = locomo_gpio_unmask_irq,
+        .name     = "LOCOMO-gpio",
+        .ack      = locomo_gpio_ack_irq,
+        .mask     = locomo_gpio_mask_irq,
+        .unmask   = locomo_gpio_unmask_irq,
+        .set_type = locomo_gpio_type,
 };
 
 static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
@@ -450,22 +481,18 @@ static void locomo_setup_irq(struct locomo *lchip)
         set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
         set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
         set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
-        set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE);
 
         set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
         set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
         set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
-        set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE);
 
         set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
         set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
         set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
-        set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE);
 
         set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
         set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
         set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
-        set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE);
 
         /* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
         set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
@@ -488,7 +515,7 @@ static void locomo_setup_irq(struct locomo *lchip)
         set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
 
         /* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
-        for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) {
+        for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
                 set_irq_chip(irq, &locomo_spi_chip);
                 set_irq_chip_data(irq, irqbase);
                 set_irq_handler(irq, handle_edge_irq);
@@ -574,20 +601,20 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state)
 
         save->LCM_GPO     = locomo_readl(lchip->base + LOCOMO_GPO);     /* GPIO */
         locomo_writel(0x00, lchip->base + LOCOMO_GPO);
-        save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPICT);   /* SPI */
+        save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT);      /* SPI */
         locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
         save->LCM_GPE     = locomo_readl(lchip->base + LOCOMO_GPE);     /* GPIO */
         locomo_writel(0x00, lchip->base + LOCOMO_GPE);
         save->LCM_ASD     = locomo_readl(lchip->base + LOCOMO_ASD);     /* ADSTART */
         locomo_writel(0x00, lchip->base + LOCOMO_ASD);
-        save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPIMD);   /* SPI */
-        locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD);
+        save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);      /* SPI */
+        locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
 
         locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
         locomo_writel(0x00, lchip->base + LOCOMO_DAC);
         locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
 
-        if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) )
+        if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
                 locomo_writel(0x00, lchip->base + LOCOMO_C32K);         /* CLK32 off */
         else
                 /* 18MHz already enabled, so no wait */
@@ -616,10 +643,10 @@ static int locomo_resume(struct platform_device *dev)
         spin_lock_irqsave(&lchip->lock, flags);
 
         locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
-        locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT);
+        locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
         locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
         locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
-        locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD);
+        locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
 
         locomo_writel(0x00, lchip->base + LOCOMO_C32K);
         locomo_writel(0x90, lchip->base + LOCOMO_TADC);
@@ -688,9 +715,9 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 
         /* GPIO */
         locomo_writel(0, lchip->base + LOCOMO_GPO);
-        locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+        locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
                         , lchip->base + LOCOMO_GPE);
-        locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+        locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
                         , lchip->base + LOCOMO_GPD);
         locomo_writel(0, lchip->base + LOCOMO_GIE);
 
@@ -833,7 +860,10 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir
         spin_lock_irqsave(&lchip->lock, flags);
 
         r = locomo_readl(lchip->base + LOCOMO_GPD);
-        r &= ~bits;
+        if (dir)
+                r |= bits;
+        else
+                r &= ~bits;
         locomo_writel(r, lchip->base + LOCOMO_GPD);
 
         r = locomo_readl(lchip->base + LOCOMO_GPE);
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index f73d62e8ab60..688b7b1ee416 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -179,3 +179,5 @@ EXPORT_SYMBOL(_find_next_zero_bit_be);
 EXPORT_SYMBOL(_find_first_bit_be);
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
+
+EXPORT_SYMBOL(copy_page);
diff --git a/arch/arm/kernel/arthur.c b/arch/arm/kernel/arthur.c
index 0ee2e9819631..321c5291d05f 100644
--- a/arch/arm/kernel/arthur.c
+++ b/arch/arm/kernel/arthur.c
@@ -90,3 +90,5 @@ static void __exit arthur_exit(void)
 
 module_init(arthur_init);
 module_exit(arthur_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
index bd4ef53bc6b9..8b8c9d38a761 100644
--- a/arch/arm/kernel/init_task.c
+++ b/arch/arm/kernel/init_task.c
@@ -13,7 +13,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 728bb8f39441..0babb645b83c 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -544,10 +544,10 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
                 struct resource *fb_res = &lcdc_resources[2];
                 size_t fb_len = fb_res->end - fb_res->start + 1;
 
-                fb = ioremap_writecombine(fb_res->start, fb_len);
+                fb = ioremap(fb_res->start, fb_len);
                 if (fb) {
                         memset(fb, 0, fb_len);
-                        iounmap(fb, fb_len);
+                        iounmap(fb);
                 }
         }
         lcdc_data = *data;
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 054689804e77..450db304936f 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -332,13 +332,6 @@ static struct resource lcdc_resources[] = {
                 .end    = AT91SAM9RL_ID_LCDC,
                 .flags  = IORESOURCE_IRQ,
         },
-#if defined(CONFIG_FB_INTSRAM)
-        [2] = {
-                .start  = AT91SAM9RL_SRAM_BASE,
-                .end    = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-#endif
 };
 
 static struct platform_device at91_lcdc_device = {
@@ -381,20 +374,6 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
         at91_set_B_periph(AT91_PIN_PC24, 0);    /* LCDD22 */
         at91_set_B_periph(AT91_PIN_PC25, 0);    /* LCDD23 */
 
-#ifdef CONFIG_FB_INTSRAM
-        {
-                void __iomem *fb;
-                struct resource *fb_res = &lcdc_resources[2];
-                size_t fb_len = fb_res->end - fb_res->start + 1;
-
-                fb = ioremap_writecombine(fb_res->start, fb_len);
-                if (fb) {
-                        memset(fb, 0, fb_len);
-                        iounmap(fb, fb_len);
-                }
-        }
-#endif
-
         lcdc_data = *data;
         platform_device_register(&at91_lcdc_device);
 }
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 1de121fc55f4..f44647738ee4 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -16,16 +16,32 @@
 #include <asm/mach/arch.h>
 #include <asm/arch/at91x40.h>
 #include <asm/arch/at91_st.h>
+#include <asm/arch/timex.h>
 #include "generic.h"
 
 /*
- * This is used in the gpio code, stub locally.
+ * Export the clock functions for the AT91X40. Some external code common
+ * to all AT91 family parts relys on this, like the gpio and serial support.
  */
 int clk_enable(struct clk *clk)
 {
         return 0;
 }
 
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+        return AT91X40_MASTER_CLOCK;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+        return NULL;
+}
+
 void __init at91x40_initialize(unsigned long main_clock)
 {
         at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 92d79fb39311..62e653a3ea1a 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -369,7 +369,8 @@ static int impd1_probe(struct lm_device *dev)
 
         lm_set_drvdata(dev, impd1);
 
-        printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
+        printk("IM-PD1 found at 0x%08lx\n",
+                (unsigned long)dev->resource.start);
 
         for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
                 impd1->vcos[i].owner = THIS_MODULE,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index d55fa4e9bb43..c07f497000ca 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -405,7 +405,6 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
                 addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
                 v3_readb(V3_LB_ISTAT));
         printk(KERN_DEBUG "%s", buf);
-        printascii(buf);
 #endif
 
         v3_writeb(V3_LB_ISTAT, 0);
@@ -447,6 +446,7 @@ static irqreturn_t v3_irq(int dummy, void *devid)
         unsigned long pc = instruction_pointer(regs);
         unsigned long instr = *(unsigned long *)pc;
         char buf[128];
+        extern void printascii(const char *);
 
         sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
                 "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ca1a4bf78a10..a4d20127a60e 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -24,7 +24,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/tsc2102.h>
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
@@ -63,7 +62,7 @@ static const int palmte_keymap[] = {
         KEY(1, 1, KEY_DOWN),
         KEY(1, 2, KEY_UP),
         KEY(1, 3, KEY_RIGHT),
-        KEY(1, 4, KEY_CENTER),
+        KEY(1, 4, KEY_ENTER),
         0,
 };
 
@@ -315,14 +314,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 #define palmte_get_power_status NULL
 #endif
 
-static struct tsc2102_config palmte_tsc2102_config = {
-        .use_internal   = 0,
-        .monitor        = TSC_BAT1 | TSC_AUX | TSC_TEMP,
-        .temp_at25c     = { 2200, 2615 },
-        .apm_report     = palmte_get_power_status,
-        .alsa_config    = &palmte_alsa_config,
-};
-
 static struct omap_board_config_kernel palmte_config[] __initdata = {
         { OMAP_TAG_USB,         &palmte_usb_config },
         { OMAP_TAG_MMC,         &palmte_mmc_config },
@@ -336,7 +327,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
                 .bus_num        = 2,    /* uWire (officially) */
                 .chip_select    = 0,    /* As opposed to 3 */
                 .irq            = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
-                .platform_data  = &palmte_tsc2102_config,
                 .max_speed_hz   = 8000000,
         },
 };
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 156510777ffe..e020c2774606 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -65,7 +65,7 @@ static int palmz71_keymap[] = {
         KEY(1, 1, KEY_DOWN),
         KEY(1, 2, KEY_UP),
         KEY(1, 3, KEY_RIGHT),
-        KEY(1, 4, KEY_CENTER),
+        KEY(1, 4, KEY_ENTER),
         KEY(2, 0, KEY_CAMERA),
         0,
 };
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1c12d7c6c7fc..1682eb77c46d 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -208,6 +208,7 @@ static void __init omap_2430sdp_init(void)
 
 static void __init omap_2430sdp_map_io(void)
 {
+        omap2_set_globals_243x();
         omap2_map_common_io();
 }
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index a1e1e6765b5b..620fa0f120ee 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -394,6 +394,7 @@ static void __init omap_apollon_init(void)
 
 static void __init omap_apollon_map_io(void)
 {
+        omap2_set_globals_242x();
         omap2_map_common_io();
 }
 
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 90938151bcf1..df8be081e159 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -65,6 +65,7 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
+        omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
         omap2_map_common_io();
 }
 
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index d1915f99a5fa..0d28f6897c8e 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -420,6 +420,7 @@ static void __init omap_h4_init(void)
 
 static void __init omap_h4_map_io(void)
 {
+        omap2_set_globals_242x();
         omap2_map_common_io();
 }
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index b57ffb5a22a5..ab9fc57d25f1 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -205,7 +205,9 @@ static void omap2_clk_wait_ready(struct clk *clk)
         /* REVISIT: What are the appropriate exclusions for 34XX? */
         /* OMAP3: ignore DSS-mod clocks */
         if (cpu_is_omap34xx() &&
-            (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+            (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
+             ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
+             clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
                 return;
 
         /* Check if both functional and interface clocks
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index cf4644a94b9b..c9c5972a2e25 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -836,7 +836,8 @@ static struct clk dpll5_m2_ck = {
         .clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
         .clksel_mask    = OMAP3430ES2_DIV_120M_MASK,
         .clksel         = div16_dpll5_clksel,
-        .flags          = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+        .flags          = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+                                PARENT_CONTROLS_CLOCK,
         .recalc         = &omap2_clksel_recalc,
 };
 
@@ -1046,12 +1047,13 @@ static struct clk iva2_ck = {
         .name           = "iva2_ck",
         .parent         = &dpll2_m2_ck,
         .init           = &omap2_init_clksel_parent,
+        .enable_reg     = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
+        .enable_bit     = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
         .clksel_reg     = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
                                           OMAP3430_CM_IDLEST_PLL),
         .clksel_mask    = OMAP3430_ST_IVA2_CLK_MASK,
         .clksel         = iva2_clksel,
-        .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-                                PARENT_CONTROLS_CLOCK,
+        .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
         .recalc         = &omap2_clksel_recalc,
 };
 
@@ -1836,7 +1838,8 @@ static struct clk omapctrl_ick = {
 static struct clk ssi_l4_ick = {
         .name           = "ssi_l4_ick",
         .parent         = &l4_ick,
-        .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+        .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+                                PARENT_CONTROLS_CLOCK,
         .recalc         = &followparent_recalc,
 };
 
@@ -2344,7 +2347,7 @@ static struct clk gpio6_fck = {
         .name           = "gpio6_fck",
         .parent         = &per_32k_alwon_fck,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-        .enable_bit     = OMAP3430_EN_GPT6_SHIFT,
+        .enable_bit     = OMAP3430_EN_GPIO6_SHIFT,
         .flags          = CLOCK_IN_OMAP343X,
         .recalc         = &followparent_recalc,
 };
@@ -2353,7 +2356,7 @@ static struct clk gpio5_fck = {
         .name           = "gpio5_fck",
         .parent         = &per_32k_alwon_fck,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-        .enable_bit     = OMAP3430_EN_GPT5_SHIFT,
+        .enable_bit     = OMAP3430_EN_GPIO5_SHIFT,
         .flags          = CLOCK_IN_OMAP343X,
         .recalc         = &followparent_recalc,
 };
@@ -2362,7 +2365,7 @@ static struct clk gpio4_fck = {
         .name           = "gpio4_fck",
         .parent         = &per_32k_alwon_fck,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-        .enable_bit     = OMAP3430_EN_GPT4_SHIFT,
+        .enable_bit     = OMAP3430_EN_GPIO4_SHIFT,
         .flags          = CLOCK_IN_OMAP343X,
         .recalc         = &followparent_recalc,
 };
@@ -2371,7 +2374,7 @@ static struct clk gpio3_fck = {
         .name           = "gpio3_fck",
         .parent         = &per_32k_alwon_fck,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-        .enable_bit     = OMAP3430_EN_GPT3_SHIFT,
+        .enable_bit     = OMAP3430_EN_GPIO3_SHIFT,
         .flags          = CLOCK_IN_OMAP343X,
         .recalc         = &followparent_recalc,
 };
@@ -2380,7 +2383,7 @@ static struct clk gpio2_fck = {
         .name           = "gpio2_fck",
         .parent         = &per_32k_alwon_fck,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-        .enable_bit     = OMAP3430_EN_GPT2_SHIFT,
+        .enable_bit     = OMAP3430_EN_GPIO2_SHIFT,
         .flags          = CLOCK_IN_OMAP343X,
         .recalc         = &followparent_recalc,
 };
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 9249129a5f46..3c38395f6442 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -56,6 +56,7 @@
 
 /* CM_FCLKEN_IVA2 */
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2                 (1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT           0
 
 /* CM_CLKEN_PLL_IVA2 */
 #define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT               8
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index b03cd06e055b..4799561c5a9e 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -70,6 +70,9 @@ struct omap_mbox2_priv {
 
 static struct clk *mbox_ick_handle;
 
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+                                  omap_mbox_type_t irq);
+
 static inline unsigned int mbox_read_reg(unsigned int reg)
 {
         return __raw_readl(mbox_base + reg);
@@ -81,7 +84,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg)
 }
 
 /* Mailbox H/W preparations */
-static inline int omap2_mbox_startup(struct omap_mbox *mbox)
+static int omap2_mbox_startup(struct omap_mbox *mbox)
 {
         unsigned int l;
 
@@ -97,38 +100,40 @@ static inline int omap2_mbox_startup(struct omap_mbox *mbox)
         l |= 0x00000011;
         mbox_write_reg(l, MAILBOX_SYSCONFIG);
 
+        omap2_mbox_enable_irq(mbox, IRQ_RX);
+
         return 0;
 }
 
-static inline void omap2_mbox_shutdown(struct omap_mbox *mbox)
+static void omap2_mbox_shutdown(struct omap_mbox *mbox)
 {
         clk_disable(mbox_ick_handle);
         clk_put(mbox_ick_handle);
 }
 
 /* Mailbox FIFO handle functions */
-static inline mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
+static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
 {
         struct omap_mbox2_fifo *fifo =
                 &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
         return (mbox_msg_t) mbox_read_reg(fifo->msg);
 }
 
-static inline void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
 {
         struct omap_mbox2_fifo *fifo =
                 &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
         mbox_write_reg(msg, fifo->msg);
 }
 
-static inline int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
 {
         struct omap_mbox2_fifo *fifo =
                 &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
         return (mbox_read_reg(fifo->msg_stat) == 0);
 }
 
-static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 {
         struct omap_mbox2_fifo *fifo =
                 &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
@@ -136,7 +141,7 @@ static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 }
 
 /* Mailbox IRQ handle functions */
-static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
                 omap_mbox_type_t irq)
 {
         struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -147,7 +152,7 @@ static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
         mbox_write_reg(l, p->irqenable);
 }
 
-static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
                 omap_mbox_type_t irq)
 {
         struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -158,7 +163,7 @@ static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
         mbox_write_reg(l, p->irqenable);
 }
 
-static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
+static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
                 omap_mbox_type_t irq)
 {
         struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -167,7 +172,7 @@ static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
         mbox_write_reg(bit, p->irqstatus);
 }
 
-static inline int omap2_mbox_is_irq(struct omap_mbox *mbox,
+static int omap2_mbox_is_irq(struct omap_mbox *mbox,
                 omap_mbox_type_t irq)
 {
         struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ab7649afd891..618f8111658a 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -30,7 +30,7 @@
 
 /*
  * Architecture-specific global PRM registers
- * Use prm_{read,write}_reg() with these registers.
+ * Use __raw_{read,write}l() with these registers.
  *
  * With a few exceptions, these are the register names beginning with
  * PRCM_* on 24xx, and PRM_* on 34xx.  (The exceptions are the
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index f9430f5ca9a8..27ce967ab9e5 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -58,7 +58,7 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci dns323_pci __initdata = {
-        .nr_controllers = 1,
+        .nr_controllers = 2,
         .swizzle        = pci_std_swizzle,
         .setup          = orion5x_pci_sys_setup,
         .scan           = orion5x_pci_sys_scan_bus,
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 88410862feef..f5074b877b7f 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -138,7 +138,7 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci kurobox_pro_pci __initdata = {
-        .nr_controllers = 1,
+        .nr_controllers = 2,
         .swizzle        = pci_std_swizzle,
         .setup          = orion5x_pci_sys_setup,
         .scan           = orion5x_pci_sys_scan_bus,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 6d4416a4f378..f5851d1adc25 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -59,7 +59,7 @@ static struct resource cmx270_dm9k_resource[] = {
         [2] = {
                 .start = CMX270_ETHIRQ,
                 .end   = CMX270_ETHIRQ,
-                .flags = IORESOURCE_IRQ,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
         }
 };
 
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 43bf5a183e90..574839d7c132 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -98,7 +98,7 @@ static struct resource dm9000_resources[] = {
         [2] = {
                 .start  = COLIBRI_ETH_IRQ,
                 .end    = COLIBRI_ETH_IRQ,
-                .flags  = IORESOURCE_IRQ,
+                .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
         },
 };
 
@@ -119,7 +119,6 @@ static void __init colibri_init(void)
         /* DM9000 LAN */
         pxa_gpio_mode(GPIO78_nCS_2_MD);
         pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-        set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
 
         platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index edc4f07a230d..9c57700ee5c2 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -50,7 +50,7 @@ static struct resource em_x270_dm9k_resource[] = {
         [2] = {
                 .start = EM_X270_ETHIRQ,
                 .end   = EM_X270_ETHIRQ,
-                .flags = IORESOURCE_IRQ,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
         }
 };
 
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 00af7f2fed66..0bb31982fb6f 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -330,7 +330,7 @@ struct ssp_device *ssp_request(int port, const char *label)
 
         mutex_unlock(&ssp_lock);
 
-        if (ssp->port_id != port)
+        if (&ssp->node == &ssp_list)
                 return NULL;
 
         return ssp;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c2cbd66db814..ab4a9f579913 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -467,8 +467,8 @@ static struct platform_device *devices[] __initdata = {
 
 static void tosa_poweroff(void)
 {
-        pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
-        GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
+        gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
+        gpio_set_value(TOSA_GPIO_ON_RESET, 1);
 
         mdelay(1000);
         arm_machine_restart('h');
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 661a2358ac22..27f63d5d3a7b 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -374,7 +374,7 @@ static struct resource bast_dm9k_resource[] = {
         [2] = {
                 .start = IRQ_DM9000,
                 .end   = IRQ_DM9000,
-                .flags = IORESOURCE_IRQ,
+                .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
         }
 
 };
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index c56423373ff3..4c4b5c4207c4 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -263,7 +263,7 @@ static struct resource vr1000_dm9k0_resource[] = {
         [2] = {
                 .start = IRQ_VR1000_DM9000A,
                 .end   = IRQ_VR1000_DM9000A,
-                .flags = IORESOURCE_IRQ
+                .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
         }
 
 };
@@ -282,7 +282,7 @@ static struct resource vr1000_dm9k1_resource[] = {
         [2] = {
                 .start = IRQ_VR1000_DM9000N,
                 .end   = IRQ_VR1000_DM9000N,
-                .flags = IORESOURCE_IRQ
+                .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
         }
 };
 
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 6496eb645cee..2f772a3965c4 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -225,26 +225,28 @@ static void __init collie_init(void)
         int ret = 0;
 
         /* cpu initialize */
-        GAFR = ( GPIO_SSP_TXD | \
-                 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
-                 GPIO_32_768kHz );
-
-        GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
-                 GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
-                 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
-                 GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
-        GPLR = GPIO_GPIO18;
-
-        // PPC pin setting
-        PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
-                 PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
-                 PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
-
-        PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
-
-        GAFR |= GPIO_32_768kHz;
-        GPDR |= GPIO_32_768kHz;
-        TUCR  = TUCR_32_768kHz;
+        GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+                GPIO_MCP_CLK | GPIO_32_768kHz;
+
+        GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+                GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+                GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+                COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
+                COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+
+        PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+                PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+                PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+
+        PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
+                COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+
+        PGSR = COLLIE_GPIO_nREMOCON_ON;
+
+        PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+
+        PCFR = PCFR_OPDE;
+
 
         platform_scoop_config = &collie_pcmcia_config;
 
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 065087afb772..d045812f3399 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -332,7 +332,7 @@ ENTRY(arm925_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
         mcr     p15, 0, r0, c7, c14, 1          @ clean+invalidate D entry
 #else
-        mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
+        mcr     p15, 0, r0, c7, c6, 1           @ invalidate D entry
 #endif
         add     r0, r0, #CACHE_DLINESIZE
         cmp     r0, r1
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 997db8472b5c..4cd33169a7c9 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -295,7 +295,7 @@ ENTRY(arm926_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
         mcr     p15, 0, r0, c7, c14, 1          @ clean+invalidate D entry
 #else
-        mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
+        mcr     p15, 0, r0, c7, c6, 1           @ invalidate D entry
 #endif
         add     r0, r0, #CACHE_DLINESIZE
         cmp     r0, r1
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 44ead902bd54..1a3d63df8e90 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -222,7 +222,7 @@ ENTRY(arm940_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
         mcr     p15, 0, r3, c7, c14, 2          @ clean/flush D entry
 #else
-        mcr     p15, 0, r3, c7, c10, 2          @ clean D entry
+        mcr     p15, 0, r3, c7, c6, 2           @ invalidate D entry
 #endif
         subs    r3, r3, #1 << 26
         bcs     2b                              @ entries 63 to 0
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 2218b0c01330..82d579ac9b98 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -265,7 +265,7 @@ ENTRY(arm946_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
         mcr     p15, 0, r0, c7, c14, 1          @ clean+invalidate D entry
 #else
-        mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
+        mcr     p15, 0, r0, c7, c6, 1           @ invalidate D entry
 #endif
         add     r0, r0, #CACHE_DLINESIZE
         cmp     r0, r1
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 72d34a23a2ec..2db5580048d8 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/cpufreq.h>
 
 #include <asm/io.h>
 
@@ -134,9 +135,17 @@ void clk_disable(struct clk *clk)
                 return;
 
         spin_lock_irqsave(&clockfw_lock, flags);
-        BUG_ON(clk->usecount == 0);
+        if (clk->usecount == 0) {
+                printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+                       clk->name);
+                WARN_ON(1);
+                goto out;
+        }
+
         if (arch_clock->clk_disable)
                 arch_clock->clk_disable(clk);
+
+out:
         spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 793740686be2..c00eda588cd8 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -604,6 +604,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
         chan->data = data;
 #ifndef CONFIG_ARCH_OMAP1
         chan->chain_id = -1;
+        chan->next_linked_ch = -1;
 #endif
         chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
@@ -1087,7 +1088,6 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
                         printk(KERN_ERR "omap_dma: Request failed %d\n", err);
                         return err;
                 }
-                dma_chan[channels[i]].next_linked_ch = -1;
                 dma_chan[channels[i]].prev_linked_ch = -1;
                 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
 
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 1945ddfec18d..6f33f58bca45 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -355,7 +355,6 @@ static int omap_mbox_init(struct omap_mbox *mbox)
                         "failed to register mailbox interrupt:%d\n", ret);
                 goto fail_request_irq;
         }
-        enable_mbox_irq(mbox, IRQ_RX);
 
         mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
         if (!mq) {
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index f197bb3a2366..2f01af5f64c4 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -65,6 +65,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
 
         /* rename any peripherals used differing from the s3c2410 */
 
+        s3c_device_sdi.name  = "s3c2440-sdi";
         s3c_device_i2c.name  = "s3c2440-i2c";
         s3c_device_nand.name = "s3c2440-nand";
         s3c_device_usbgadget.name = "s3c2440-usbgadget";
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 06046074d68b..119edb839ac3 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 23:20:41 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:59 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -37,17 +37,15 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -61,11 +59,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -73,11 +73,21 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -101,10 +111,15 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -141,16 +156,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -164,9 +182,10 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -202,6 +221,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -255,87 +275,40 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_ADVANCED is not set
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_GRE=m
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
 CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -343,54 +316,25 @@ CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
@@ -407,7 +351,6 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -415,6 +358,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -450,6 +394,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -531,11 +476,18 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -568,11 +520,13 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -586,6 +540,7 @@ CONFIG_MACB=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -599,7 +554,6 @@ CONFIG_PPPOE=m
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -621,6 +575,7 @@ CONFIG_SLHC=m
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -633,6 +588,7 @@ CONFIG_SLHC=m
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -640,21 +596,13 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -665,27 +613,23 @@ CONFIG_I2C_GPIO=m
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -702,9 +646,27 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -724,12 +686,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -753,14 +725,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -772,6 +742,7 @@ CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -787,6 +758,7 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -797,11 +769,13 @@ CONFIG_MMC=m
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
 CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -816,6 +790,8 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -844,19 +820,22 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -865,10 +844,6 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -885,14 +860,11 @@ CONFIG_JBD=m
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -948,8 +920,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -957,12 +931,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1030,11 +1002,6 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1042,6 +1009,7 @@ CONFIG_KPROBES=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1052,7 +1020,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,12 +1036,14 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1083,52 +1055,90 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_ITU_T=m
@@ -1137,10 +1147,6 @@ CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index 2fb2ede5f2b4..c6d02eac8791 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 23:07:43 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:20 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -36,15 +36,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -58,11 +58,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -70,11 +72,21 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -98,10 +110,15 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -147,16 +164,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -170,9 +190,10 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -208,6 +229,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -252,8 +274,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -279,6 +303,7 @@ CONFIG_LLC=m
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -314,6 +339,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -368,6 +394,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_MTD_DATAFLASH=m
 CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -395,13 +422,18 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -444,6 +476,9 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
@@ -469,11 +504,13 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -487,6 +524,7 @@ CONFIG_MACB=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -500,7 +538,6 @@ CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -556,6 +593,7 @@ CONFIG_MOUSE_GPIO=m
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -568,6 +606,7 @@ CONFIG_MOUSE_GPIO=m
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -575,21 +614,13 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -600,27 +631,23 @@ CONFIG_I2C_GPIO=m
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -637,9 +664,27 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -659,12 +704,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -682,8 +737,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -749,7 +804,11 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -761,14 +820,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -781,6 +838,7 @@ CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -796,6 +854,7 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -806,17 +865,20 @@ CONFIG_MMC=m
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
 CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 
 #
 # LED drivers
 #
+CONFIG_LEDS_ATMEL_PWM=m
 CONFIG_LEDS_GPIO=m
 
 #
@@ -825,6 +887,8 @@ CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -853,19 +917,22 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -874,10 +941,6 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -895,14 +958,11 @@ CONFIG_JBD=m
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -957,8 +1017,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -966,7 +1028,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1028,11 +1089,6 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1040,6 +1096,7 @@ CONFIG_KPROBES=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,7 +1107,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1064,12 +1123,14 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1081,52 +1142,90 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_ITU_T=m
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 45e23e03f074..5a4ae6b5d28f 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 22:54:34 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:33:05 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -39,17 +39,15 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 # CONFIG_TASK_XACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -63,11 +61,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +75,20 @@ CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -103,10 +112,15 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -152,16 +166,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -175,9 +192,10 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -234,8 +252,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -260,6 +276,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -295,6 +312,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -349,6 +367,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_MTD_DATAFLASH=m
 CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -376,13 +395,18 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -427,6 +451,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
@@ -447,6 +474,7 @@ CONFIG_NETDEVICES=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -460,7 +488,6 @@ CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -516,6 +543,7 @@ CONFIG_MOUSE_GPIO=m
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -528,6 +556,7 @@ CONFIG_MOUSE_GPIO=m
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -535,21 +564,13 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -560,27 +581,23 @@ CONFIG_I2C_GPIO=m
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -597,9 +614,27 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -619,12 +654,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -682,7 +727,11 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -694,14 +743,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -714,6 +761,7 @@ CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -729,6 +777,7 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -739,17 +788,20 @@ CONFIG_MMC=m
 CONFIG_MMC_BLOCK=m
 # CONFIG_MMC_BLOCK_BOUNCE is not set
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
 CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+CONFIG_LEDS_ATMEL_PWM=m
 CONFIG_LEDS_GPIO=y
 
 #
@@ -758,6 +810,8 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -786,19 +840,22 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -807,11 +864,8 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 CONFIG_UIO=m
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems
@@ -828,14 +882,11 @@ CONFIG_JBD=m
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -891,8 +942,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
@@ -943,11 +996,6 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -955,6 +1003,7 @@ CONFIG_KPROBES=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -965,6 +1014,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -978,12 +1028,14 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1000,6 +1052,8 @@ CONFIG_FORCED_INLINING=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_ITU_T=m
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 634c52760349..a0912fb7c92e 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 23:04:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:34:57 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -34,15 +34,15 @@ CONFIG_LOCALVERSION=""
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -54,24 +54,38 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 # CONFIG_BLOCK is not set
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -115,16 +129,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -134,20 +151,7 @@ CONFIG_CMDLINE=""
 #
 # CPU Frequency scaling
 #
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_AT32AP=y
+# CONFIG_CPU_FREQ is not set
 
 #
 # Bus options
@@ -197,8 +201,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -222,6 +224,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -255,6 +258,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -321,6 +325,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 # CONFIG_MISC_DEVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -346,6 +351,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -358,6 +364,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_PDC is not set
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -365,15 +372,9 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -389,9 +390,24 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -411,12 +427,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -434,8 +460,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -467,14 +493,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
@@ -485,6 +509,7 @@ CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -499,8 +524,11 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -519,15 +547,17 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -536,18 +566,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
 # File systems
 #
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -580,7 +606,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -588,6 +613,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -608,6 +634,8 @@ CONFIG_MAGIC_SYSRQ=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c
index 80f55f8dbf1c..84a7d44edc67 100644
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -29,7 +29,9 @@ EXPORT_SYMBOL(__avr32_asr64);
  */
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memcpy);
+
 EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
 
 /*
  * Userspace access stuff.
@@ -41,6 +43,8 @@ EXPORT_SYMBOL(strncpy_from_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(clear_user);
 EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(strnlen_user);
+
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
 
diff --git a/arch/avr32/kernel/init_task.c b/arch/avr32/kernel/init_task.c
index effcacf9d1a2..44058469c6ec 100644
--- a/arch/avr32/kernel/init_task.c
+++ b/arch/avr32/kernel/init_task.c
@@ -14,7 +14,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
index 235524b79193..5dd8d25428bf 100644
--- a/arch/avr32/mach-at32ap/cpufreq.c
+++ b/arch/avr32/mach-at32ap/cpufreq.c
@@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void)
 {
         return cpufreq_register_driver(&at32_driver);
 }
-
-arch_initcall(at32_cpufreq_init);
+late_initcall(at32_cpufreq_init);
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index fd5708523f2e..b87634e75f20 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -479,16 +479,6 @@ comment "Memory Setup"
 
 comment "Misc"
 
-config ENET_FLASH_PIN
-        int "PF port/pin used for flash and ethernet sharing"
-        depends on (BFIN533_STAMP)
-        default  0
-        help
-          PF port/pin used for flash and ethernet sharing to allow other PF
-          pins to be used on other platforms without having to touch common
-          code.
-          For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc.
-
 choice
         prompt "Blackfin Exception Scratch Register"
         default BFIN_SCRATCH_REG_RETN
@@ -695,6 +685,8 @@ choice
         prompt "Uncached SDRAM region"
         default DMA_UNCACHED_1M
         depends on BFIN_DMA_5XX
+config DMA_UNCACHED_4M
+        bool "Enable 4M DMA region"
 config DMA_UNCACHED_2M
         bool "Enable 2M DMA region"
 config DMA_UNCACHED_1M
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 64876dfc2e55..5e6fb9d8e50f 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
+# Fri May 16 10:02:29 2008
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +14,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +64,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,7 +133,6 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF52x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC32M16A2TG_75=y
 CONFIG_BFIN527_EZKIT=y
 
@@ -227,12 +218,14 @@ CONFIG_IRQ_USB_DMA=11
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -246,13 +239,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -288,12 +285,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -338,10 +337,6 @@ CONFIG_BANK_3=0xFFC0
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -357,9 +352,15 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -395,6 +396,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -421,10 +423,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -444,6 +442,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -452,14 +451,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -479,6 +475,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -542,39 +539,27 @@ CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -582,22 +567,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -611,21 +592,24 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -635,6 +619,15 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -642,15 +635,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -665,7 +650,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -697,7 +681,6 @@ CONFIG_INPUT_MISC=y
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
@@ -706,7 +689,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_AD5304 is not set
+# CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -735,27 +718,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
@@ -777,21 +744,24 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -814,14 +784,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -829,12 +796,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -849,13 +816,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -865,6 +835,25 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -881,72 +870,133 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
 
 #
-# Enable Host or Gadget support to see Inventra options
+# Blackfin high speed USB support
 #
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# LED devices
+# USB Imaging devices
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
 
 #
-# LED drivers
+# USB port drivers
 #
 
 #
-# LED Triggers
+# USB Serial Converter support
 #
+# CONFIG_USB_SERIAL is not set
 
 #
-# InfiniBand support
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB DSL modem support
 #
 
 #
-# Real Time Clock
+# USB Gadget Support
 #
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -966,6 +1016,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -973,6 +1024,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -984,8 +1036,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -994,22 +1048,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
+# Userspace I/O
 #
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1054,7 +1095,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1080,10 +1120,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1092,10 +1134,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1115,17 +1154,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1166,21 +1200,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1188,6 +1217,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1207,11 +1237,8 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1222,6 +1249,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 5bfdfb287d13..1ff2ff4b49aa 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,7 +132,6 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF54x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
 CONFIG_IRQ_SPORT0_RX=9
@@ -169,6 +159,7 @@ CONFIG_IRQ_TIMER8=11
 CONFIG_IRQ_TIMER9=11
 CONFIG_IRQ_TIMER10=11
 CONFIG_BFIN548_EZKIT=y
+# CONFIG_BFIN548_BLUETECHNIX_CM is not set
 
 #
 # BF548 Specific Configuration
@@ -262,12 +253,14 @@ CONFIG_PINT3_ASSIGN=0x02020303
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -281,14 +274,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-# CONFIG_MEM_MT46V32M16_6T is not set
-CONFIG_MEM_MT46V32M16_5B=y
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -324,12 +320,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 CONFIG_DMA_UNCACHED_2M=y
 # CONFIG_DMA_UNCACHED_1M is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -377,10 +375,6 @@ CONFIG_EBIU_FCTLVAL=0x6
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -396,6 +390,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
@@ -439,6 +434,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -465,10 +461,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -488,6 +480,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -496,14 +489,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -523,6 +513,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -587,39 +578,27 @@ CONFIG_MTD_NAND_BF5XX_HWECC=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -627,6 +606,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -657,43 +637,35 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_PATA_PLATFORM is not set
 CONFIG_PATA_BF54X=y
-CONFIG_PATA_BF54X_DMA=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_SMC91X is not set
 CONFIG_SMSC911X=y
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -703,6 +675,15 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -710,15 +691,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -733,9 +706,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
 
@@ -758,6 +728,7 @@ CONFIG_KEYBOARD_BFIN=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -787,7 +758,6 @@ CONFIG_INPUT_MISC=y
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
@@ -796,7 +766,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_AD5304 is not set
+# CONFIG_SIMPLE_GPIO is not set
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
@@ -830,27 +800,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
@@ -872,21 +826,24 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -909,14 +866,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -924,12 +878,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -944,13 +898,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -960,6 +917,25 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -972,23 +948,20 @@ CONFIG_HWMON=y
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -1003,18 +976,24 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-# CONFIG_FB_BFIN_7171 is not set
-# CONFIG_FB_BFIN_7393 is not set
 CONFIG_FB_BF54X_LQ043=y
 # CONFIG_FB_BFIN_T350MCQB is not set
+# CONFIG_FB_BFIN_7393 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 # CONFIG_FONT_8x8 is not set
@@ -1065,10 +1044,21 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
+# SPI devices
+#
+
+#
 # ALSA Blackfin devices
 #
 # CONFIG_SND_BLACKFIN_AD1836 is not set
 # CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
 
 #
 # System on Chip audio support
@@ -1084,6 +1074,10 @@ CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 CONFIG_SND_BF5XX_SPORT_NUM=0
 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
 CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
+
+#
+# SoC Audio support for SuperH
+#
 CONFIG_SND_SOC_AD1980=y
 
 #
@@ -1091,72 +1085,152 @@ CONFIG_SND_SOC_AD1980=y
 #
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
 
 #
-# Enable Host or Gadget support to see Inventra options
+# USB Host Controller Drivers
 #
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+# CONFIG_USB_INVENTRA_DMA is not set
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# MMC/SD Card Drivers
+# USB Imaging devices
 #
-CONFIG_MMC_BLOCK=m
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
 
 #
-# MMC/SD Host Controller Drivers
+# USB port drivers
 #
-CONFIG_SDH_BFIN=m
-# CONFIG_SPI_MMC is not set
 
 #
-# LED devices
+# USB Serial Converter support
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USB_SERIAL is not set
 
 #
-# LED drivers
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 
 #
-# LED Triggers
+# USB DSL modem support
 #
 
 #
-# InfiniBand support
+# USB Gadget Support
 #
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# MMC/SD Card Drivers
 #
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
 
 #
-# Real Time Clock
+# MMC/SD Host Controller Drivers
 #
+CONFIG_SDH_BFIN=m
+# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_SPI_MMC is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1176,6 +1250,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1183,6 +1258,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1194,8 +1270,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1204,22 +1282,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
+# Userspace I/O
 #
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1280,7 +1345,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1306,10 +1370,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1318,10 +1384,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1352,7 +1415,6 @@ CONFIG_CIFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1375,10 +1437,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1419,21 +1477,16 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1441,6 +1494,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1460,11 +1514,8 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1475,6 +1526,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 5f6ff04a86c3..4384a670a8b8 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -212,7 +212,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=64
+CONFIG_MAX_MEM_SIZE=64
 CONFIG_MEM_ADD_WIDTH=10
 
 #
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index fd5448d6107c..d54f19085f37 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -90,6 +90,17 @@ int request_dma(unsigned int channel, char *device_id)
 {
 
         pr_debug("request_dma() : BEGIN \n");
+
+#if defined(CONFIG_BF561) && ANOMALY_05000182
+        if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) {
+                if (get_cclk() > 500000000) {
+                        printk(KERN_WARNING
+                               "Request IMDMA failed due to ANOMALY 05000182\n");
+                        return -EFAULT;
+                }
+        }
+#endif
+
         mutex_lock(&(dma_ch[channel].dmalock));
 
         if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED)
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 7e8eaf4a31bb..b6d89d1644cc 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -1130,6 +1130,25 @@ void bfin_gpio_irq_prepare(unsigned gpio)
 
 #else
 
+int gpio_get_value(unsigned gpio)
+{
+        unsigned long flags;
+        int ret;
+
+        if (unlikely(get_gpio_edge(gpio))) {
+                local_irq_save(flags);
+                set_gpio_edge(gpio, 0);
+                ret = get_gpio_data(gpio);
+                set_gpio_edge(gpio, 1);
+                local_irq_restore(flags);
+
+                return ret;
+        } else
+                return get_gpio_data(gpio);
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+
 int gpio_direction_input(unsigned gpio)
 {
         unsigned long flags;
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index 053edff6c0d8..4367330909b2 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -90,7 +90,9 @@ EXPORT_SYMBOL(__umodsi3);
 EXPORT_SYMBOL(outsb);
 EXPORT_SYMBOL(insb);
 EXPORT_SYMBOL(outsw);
+EXPORT_SYMBOL(outsw_8);
 EXPORT_SYMBOL(insw);
+EXPORT_SYMBOL(insw_8);
 EXPORT_SYMBOL(outsl);
 EXPORT_SYMBOL(insl);
 EXPORT_SYMBOL(insl_16);
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index e698554895a7..3a3e9615b002 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -10,8 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/blackfin.h>
 #include <asm/gptimers.h>
 
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index c640154030e2..6bdba7b21109 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -34,7 +34,6 @@
 #include <linux/fs.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 5b847070dae5..f061f5181623 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -67,7 +67,7 @@ void __init trap_init(void)
         CSYNC();
 }
 
-void *saved_icplb_fault_addr, *saved_dcplb_fault_addr;
+unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
 
 int kstack_depth_to_print = 48;
 
@@ -364,13 +364,13 @@ asmlinkage void trap_c(struct pt_regs *fp)
         /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
         case VEC_CPLB_MHIT:
                 info.si_code = ILL_CPLB_MULHIT;
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
                 sig = SIGSEGV;
-                printk(KERN_NOTICE "NULL pointer access (probably)\n");
-#else
-                sig = SIGILL;
-                printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+                if (saved_dcplb_fault_addr < FIXED_CODE_START)
+                        printk(KERN_NOTICE "NULL pointer access\n");
+                else
 #endif
+                        printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
                 CHK_DEBUGGER_TRAP();
                 break;
         /* 0x28 - Emulation Watchpoint, handled here */
@@ -419,13 +419,13 @@ asmlinkage void trap_c(struct pt_regs *fp)
         /* 0x2D - Instruction CPLB Multiple Hits, handled here */
         case VEC_CPLB_I_MHIT:
                 info.si_code = ILL_CPLB_MULHIT;
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
                 sig = SIGSEGV;
-                printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n");
-#else
-                sig = SIGILL;
-                printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+                if (saved_icplb_fault_addr < FIXED_CODE_START)
+                        printk(KERN_NOTICE "Jump to NULL address\n");
+                else
 #endif
+                        printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
                 CHK_DEBUGGER_TRAP();
                 break;
         /* 0x2E - Illegal use of Supervisor Resource, handled here */
@@ -939,8 +939,6 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
 
         oops_in_progress = 1;
 
-        printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr);
-        printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr);
         dump_bfin_process(fp);
         dump_bfin_mem(fp);
         show_regs(fp);
diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c
index 42768e0c80ca..5c87505165d3 100644
--- a/arch/blackfin/lib/checksum.c
+++ b/arch/blackfin/lib/checksum.c
@@ -72,9 +72,9 @@ static unsigned short do_csum(const unsigned char *buff, int len)
  *      This is a version of ip_compute_csum() optimized for IP headers,
  *      which always checksum on 4 octet boundaries.
  */
-unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
+__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl)
 {
-        return ~do_csum(iph, ihl * 4);
+        return (__force __sum16)~do_csum(iph, ihl * 4);
 }
 
 /*
@@ -89,7 +89,7 @@ unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
  *
  * it's best to have buff aligned on a 32-bit boundary
  */
-unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
+__wsum csum_partial(const void *buff, int len, __wsum sum)
 {
         /*
          * Just in case we get nasty checksum data...
@@ -109,22 +109,22 @@ unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c
  */
-unsigned short ip_compute_csum(const unsigned char *buff, int len)
+__sum16 ip_compute_csum(const void *buff, int len)
 {
-        return ~do_csum(buff, len);
+        return (__force __sum16)~do_csum(buff, len);
 }
 
 /*
  * copy from fs while checksumming, otherwise like csum_partial
  */
 
-unsigned int
-csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
-                            int len, int sum, int *csum_err)
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst,
+                            int len, __wsum sum, int *csum_err)
 {
         if (csum_err)
                 *csum_err = 0;
-        memcpy(dst, src, len);
+        memcpy(dst, (__force void *)src, len);
         return csum_partial(dst, len, sum);
 }
 
@@ -132,8 +132,7 @@ csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
  * copy from ds while checksumming, otherwise like csum_partial
  */
 
-unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst,
-                               int len, int sum)
+__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
 {
         memcpy(dst, src, len);
         return csum_partial(dst, len, sum);
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
index df7b8833a0c5..eba2343b1b59 100644
--- a/arch/blackfin/lib/ins.S
+++ b/arch/blackfin/lib/ins.S
@@ -7,7 +7,7 @@
  * Description:  Implementation of ins{bwl} for BlackFin processors using zero overhead loops.
  *
  * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *               Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
@@ -63,6 +63,23 @@ ENTRY(_insw)
         RTS;
 ENDPROC(_insw)
 
+ENTRY(_insw_8)
+        P0 = R0;        /* P0 = port */
+        cli R3;
+        P1 = R1;        /* P1 = address */
+        P2 = R2;        /* P2 = count */
+        SSYNC;
+        LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s:  R0 = W[P0];
+                B[P1++] = R0;
+                R0 = R0 >> 8;
+                B[P1++] = R0;
+                NOP;
+.Lword8_loop_e: NOP;
+        sti R3;
+        RTS;
+ENDPROC(_insw_8)
+
 ENTRY(_insb)
         P0 = R0;        /* P0 = port */
         cli R3;
@@ -78,8 +95,6 @@ ENTRY(_insb)
         RTS;
 ENDPROC(_insb)
 
-
-
 ENTRY(_insl_16)
         P0 = R0;        /* P0 = port */
         cli R3;
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
index 4c3da8ae094e..4685b7aa0080 100644
--- a/arch/blackfin/lib/outs.S
+++ b/arch/blackfin/lib/outs.S
@@ -7,7 +7,7 @@
  * Description:  Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
  *
  * Modified:     Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -63,3 +63,17 @@ ENTRY(_outsb)
 .Lbyte_loop_e: B[P0] = R0;
         RTS;
 ENDPROC(_outsb)
+
+ENTRY(_outsw_8)
+        P0 = R0;        /* P0 = port */
+        P1 = R1;        /* P1 = address */
+        P2 = R2;        /* P2 = count */
+
+        LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s: R1 = B[P1++];
+                R0 = B[P1++];
+                R0 = R0 << 8;
+                R0 = R0 + R1;
+.Lword8_loop_e: W[P0] = R0;
+        RTS;
+ENDPROC(_outsw_8)
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 8aa49f804228..5958eecefcf1 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -451,9 +451,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) \
         || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -647,10 +644,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias               = "ad7877",
                 .platform_data          = &bfin_ad7877_ts_info,
-                .irq                    = IRQ_PF6,
+                .irq                    = IRQ_PF8,
                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num        = 0,
-                .chip_select  = 1,
+                .chip_select  = 2,
                 .controller_data = &spi_ad7877_chip_info,
         },
 #endif
@@ -676,6 +673,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
         .num_chipselect = 8,
@@ -799,13 +797,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
         {
                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-                .type = "pcf8574_lcd",
         },
 #endif
 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
         {
                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-                .type = "pcf8574_keypad",
                 .irq = IRQ_PF8,
         },
 #endif
@@ -1020,10 +1016,7 @@ static int __init stamp_init(void)
 #endif
 
         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        spi_register_board_info(bfin_spi_board_info,
-                                ARRAY_SIZE(bfin_spi_board_info));
-#endif
+        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
         irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 9d28415163ea..079389cbd859 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -87,9 +87,6 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
         {
@@ -189,6 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
         [0] = {
@@ -425,9 +423,7 @@ static int __init ezkit_init(void)
 {
         printk(KERN_INFO "%s(): registering device resources\n", __func__);
         platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
         irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 7fd35fb32fd5..13ae49515f73 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -111,7 +111,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE)
+#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
 static struct mtd_partition stamp_partitions[] = {
         {
                 .name   = "Bootloader",
@@ -141,13 +141,17 @@ static struct resource stamp_flash_resource[] = {
                 .end   = 0x203fffff,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = CONFIG_ENET_FLASH_PIN,
+                .start = 0x7BB07BB0,    /* AMBCTL0 setting when accessing flash */
+                .end   = 0x7BB07BB0,    /* AMBCTL1 setting when accessing flash */
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = GPIO_PF0,
                 .flags = IORESOURCE_IRQ,
         }
 };
 
 static struct platform_device stamp_flash_device = {
-        .name          = "BF5xx-Flash",
+        .name          = "bfin-async-flash",
         .id            = 0,
         .dev = {
                 .platform_data = &stamp_flash_data,
@@ -157,9 +161,6 @@ static struct platform_device stamp_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
         {
@@ -316,6 +317,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
         [0] = {
@@ -595,7 +597,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 
         &bfin_gpios_device,
 
-#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE)
+#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
         &stamp_flash_device,
 #endif
 };
@@ -617,15 +619,13 @@ static int __init stamp_init(void)
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
         /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
-        bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN));
-        bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN);
+        bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+        bfin_write_FIO_FLAG_S(PF0);
         SSYNC();
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        spi_register_board_info(bfin_spi_board_info,
-                                ARRAY_SIZE(bfin_spi_board_info));
-#endif
+        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
         irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 #endif
@@ -636,8 +636,8 @@ arch_initcall(stamp_init);
 
 void native_machine_restart(char *cmd)
 {
-#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
-        bfin_write_FIO_INEN(~BIT_TO_SET);
-        bfin_write_FIO_DIR(BIT_TO_SET);
-        bfin_write_FIO_FLAG_C(BIT_TO_SET);
+        /* workaround pull up on cpld / flash pin not being strong enough */
+        bfin_write_FIO_INEN(~PF0);
+        bfin_write_FIO_DIR(PF0);
+        bfin_write_FIO_FLAG_C(PF0);
 }
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 87e450f29e37..c94f7a5b8211 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -3,7 +3,7 @@
 #
 
 obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
-obj-$(CONFIG_BFIN537_STAMP)            += stamp.o led.o
+obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o
 obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/led.S b/arch/blackfin/mach-bf537/boards/led.S
deleted file mode 100644
index 4e9ea4283e5f..000000000000
--- a/arch/blackfin/mach-bf537/boards/led.S
+++ /dev/null
@@ -1,183 +0,0 @@
-/****************************************************
- * LED1 ---- PF6        LED2 ---- PF7               *
- * LED3 ---- PF8        LED4 ---- PF9               *
- * LED5 ---- PF10       LED6 ---- PF11              *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
-   So there is no need to save any registers before calling them.  */
-
-        .text;
-
-/* Initialize LEDs.  */
-
-ENTRY(_led_init)
-        LINK 12;
-        [--SP] = P0;
-        [--SP] = R0;
-        [--SP] = R1;
-        [--SP] = R2;
-        R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
-        R2 = ~R1;
-
-        P0.H = hi(PORTF_FER);
-        P0.L = lo(PORTF_FER);
-        R0 = W[P0](Z);
-        SSYNC;
-        R0 = R0 & R2;
-        W[P0] = R0.L;
-        SSYNC;
-
-        P0.H = hi(PORTFIO_DIR);
-        P0.L = lo(PORTFIO_DIR);
-        R0 = W[P0](Z);
-        SSYNC;
-        R0 = R0 | R1;
-        W[P0] = R0.L;
-        SSYNC;
-
-        P0.H = hi(PORTFIO_INEN);
-        P0.L = lo(PORTFIO_INEN);
-        R0 = W[P0](Z);
-        SSYNC;
-        R0 = R0 & R2;
-        W[P0] = R0.L;
-        SSYNC;
-
-        R2 = [SP++];
-        R1 = [SP++];
-        R0 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
-   It expects the LED number passed through R0.  */
-
-ENTRY(_led_on)
-        LINK 12;
-        [--SP] = P0;
-        [--SP] = R1;
-        CALL _led_init;
-        R1 = 1;
-        R0 += 5;
-        R1 <<= R0;
-        P0.H = hi(PORTFIO);
-        P0.L = lo(PORTFIO);
-        R0 = W[P0](Z);
-        SSYNC;
-        R0 = R0 | R1;
-        W[P0] = R0.L;
-        SSYNC;
-        R1 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged.  */
-
-ENTRY(_led_off)
-        LINK 12;
-        [--SP] = P0;
-        [--SP] = R1;
-        CALL _led_init;
-        R1 = 1;
-        R0 += 5;
-        R1 <<= R0;
-        R1 = ~R1;
-        P0.H = hi(PORTFIO);
-        P0.L = lo(PORTFIO);
-        R0 = W[P0](Z);
-        SSYNC;
-        R0 = R0 & R1;
-        W[P0] = R0.L;
-        SSYNC;
-        R1 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged.  */
-
-ENTRY(_led_toggle)
-        LINK 12;
-        [--SP] = P0;
-        [--SP] = R1;
-        CALL _led_init;
-        R1 = 1;
-        R0 += 5;
-        R1 <<= R0;
-        P0.H = hi(PORTFIO);
-        P0.L = lo(PORTFIO);
-        R0 = W[P0](Z);
-        SSYNC;
-        R0 = R0 ^ R1;
-        W[P0] = R0.L;
-        SSYNC;
-        R1 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format.  */
-
-ENTRY(_led_disp_num)
-        LINK 12;
-        [--SP] = P0;
-        [--SP] = R1;
-        [--SP] = R2;
-        CALL _led_init;
-        R1 = 0x3f(X);
-        R0 = R0 & R1;
-        R2 = 6(X);
-        R0 <<= R2;
-        R1 <<= R2;
-        P0.H = hi(PORTFIO);
-        P0.L = lo(PORTFIO);
-        R2 = W[P0](Z);
-        SSYNC;
-        R1 = ~R1;
-        R2 = R2 & R1;
-        R2 = R2 | R0;
-        W[P0] = R2.L;
-        SSYNC;
-        R2 = [SP++];
-        R1 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format.  */
-
-ENTRY(_led_toggle_num)
-        LINK 12;
-        [--SP] = P0;
-        [--SP] = R1;
-        [--SP] = R2;
-        CALL _led_init;
-        R1 = 0x3f(X);
-        R0 = R0 & R1;
-        R1 = 6(X);
-        R0 <<= R1;
-        P0.H = hi(PORTFIO);
-        P0.L = lo(PORTFIO);
-        R1 = W[P0](Z);
-        SSYNC;
-        R1 = R1 ^ R0;
-        W[P0] = R1.L;
-        SSYNC;
-        R2 = [SP++];
-        R1 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_toggle_num, .-_led_toggle_num
-
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9a756d1f3d73..671f9d67f23a 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -400,9 +400,6 @@ static struct platform_device stamp_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) \
         || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -629,6 +626,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
         .num_chipselect = 8,
@@ -939,10 +937,7 @@ static int __init stamp_init(void)
 #endif
 
         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        spi_register_board_info(bfin_spi_board_info,
-                                ARRAY_SIZE(bfin_spi_board_info));
-#endif
+        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
         irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile
index eed161dd7845..319ef54c4221 100644
--- a/arch/blackfin/mach-bf548/boards/Makefile
+++ b/arch/blackfin/mach-bf548/boards/Makefile
@@ -2,5 +2,5 @@
 # arch/blackfin/mach-bf548/boards/Makefile
 #
 
-obj-$(CONFIG_BFIN548_EZKIT)            += ezkit.o led.o
+obj-$(CONFIG_BFIN548_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN548_BLUETECHNIX_CM)   += cm_bf548.o
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 3b74f96d3590..4f4ae8787edf 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -684,7 +684,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 
 static int __init cm_bf548_init(void)
 {
-        printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+        printk(KERN_INFO "%s(): registering device resources\n", __func__);
         platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index d1682bb37509..af7c211a580e 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -412,8 +412,6 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
 #if defined(CONFIG_MTD_M25P80) \
         || defined(CONFIG_MTD_M25P80_MODULE)
 /* SPI flash chip (m25p16) */
@@ -481,7 +479,7 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
-static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
         || defined(CONFIG_MTD_M25P80_MODULE)
         {
@@ -527,6 +525,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
         [0] = {
@@ -800,10 +799,7 @@ static int __init ezkit_init(void)
 
         platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        spi_register_board_info(bf54x_spi_board_info,
-                        ARRAY_SIZE(bf54x_spi_board_info));
-#endif
+        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
         return 0;
 }
diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S
deleted file mode 100644
index f47daf3770d0..000000000000
--- a/arch/blackfin/mach-bf548/boards/led.S
+++ /dev/null
@@ -1,172 +0,0 @@
-/****************************************************
- * LED1 ---- PG6        LED2 ---- PG7               *
- * LED3 ---- PG8        LED4 ---- PG9               *
- * LED5 ---- PG10       LED6 ---- PG11              *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
-   So there is no need to save any registers before calling them.  */
-
-        .text;
-
-/* Initialize LEDs.  */
-
-ENTRY(_led_init)
-        LINK 0;
-        [--SP] = P0;
-        [--SP] = R0;
-        [--SP] = R1;
-        [--SP] = R2;
-        R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
-        R2 = ~R1;
-
-        P0.H = hi(PORTG_FER);
-        P0.L = lo(PORTG_FER);
-        R0 = W[P0](Z);
-        SSYNC;
-        R0 = R0 & R2;
-        W[P0] = R0.L;
-        SSYNC;
-
-        P0.H = hi(PORTG_DIR_SET);
-        P0.L = lo(PORTG_DIR_SET);
-        W[P0] = R1.L;
-        SSYNC;
-
-        P0.H = hi(PORTG_INEN);
-        P0.L = lo(PORTG_INEN);
-        R0 = W[P0](Z);
-        SSYNC;
-        R0 = R0 & R2;
-        W[P0] = R0.L;
-        SSYNC;
-
-        R2 = [SP++];
-        R1 = [SP++];
-        R0 = [SP++];
-        P0 = [SP++];
-        RTS;
-        .size   _led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
-   It expects the LED number passed through R0.  */
-
-ENTRY(_led_on)
-        LINK 0;
-        [--SP] = P0;
-        [--SP] = R1;
-        CALL _led_init;
-        R1 = 1;
-        R0 += 5;
-        R1 <<= R0;
-        P0.H = hi(PORTG_SET);
-        P0.L = lo(PORTG_SET);
-        W[P0] = R1.L;
-        SSYNC;
-        R1 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged.  */
-
-ENTRY(_led_off)
-        LINK 0;
-        [--SP] = P0;
-        [--SP] = R1;
-        CALL _led_init;
-        R1 = 1;
-        R0 += 5;
-        R1 <<= R0;
-        P0.H = hi(PORTG_CLEAR);
-        P0.L = lo(PORTG_CLEAR);
-        W[P0] = R1.L;
-        SSYNC;
-        R1 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged.  */
-
-ENTRY(_led_toggle)
-        LINK 0;
-        [--SP] = P0;
-        [--SP] = R1;
-        CALL _led_init;
-        R1 = 1;
-        R0 += 5;
-        R1 <<= R0;
-        P0.H = hi(PORTG);
-        P0.L = lo(PORTG);
-        R0 = W[P0](Z);
-        SSYNC;
-        R0 = R0 ^ R1;
-        W[P0] = R0.L;
-        SSYNC;
-        R1 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format.  */
-
-ENTRY(_led_disp_num)
-        LINK 0;
-        [--SP] = P0;
-        [--SP] = R1;
-        [--SP] = R2;
-        CALL _led_init;
-        R1 = 0x3f(X);
-        R0 = R0 & R1;
-        R2 = 6(X);
-        R0 <<= R2;
-        R1 <<= R2;
-        P0.H = hi(PORTG);
-        P0.L = lo(PORTG);
-        R2 = W[P0](Z);
-        SSYNC;
-        R1 = ~R1;
-        R2 = R2 & R1;
-        R2 = R2 | R0;
-        W[P0] = R2.L;
-        SSYNC;
-        R2 = [SP++];
-        R1 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format.  */
-
-ENTRY(_led_toggle_num)
-        LINK 0;
-        [--SP] = P0;
-        [--SP] = R1;
-        [--SP] = R2;
-        CALL _led_init;
-        R1 = 0x3f(X);
-        R0 = R0 & R1;
-        R1 = 6(X);
-        R0 <<= R1;
-        P0.H = hi(PORTG);
-        P0.L = lo(PORTG);
-        R1 = W[P0](Z);
-        SSYNC;
-        R1 = R1 ^ R0;
-        W[P0] = R1.L;
-        SSYNC;
-        R2 = [SP++];
-        R1 = [SP++];
-        P0 = [SP++];
-        UNLINK;
-        RTS;
-        .size   _led_toggle_num, .-_led_toggle_num
-
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 61d8f7648b24..bc6feded8569 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -280,7 +280,6 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#ifdef CONFIG_SPI_BFIN
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@@ -295,8 +294,8 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
         .bits_per_word = 8,
 };
 #endif
-#endif
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
         [0] = {
@@ -327,6 +326,7 @@ static struct platform_device bfin_spi0_device = {
                 .platform_data = &bfin_spi0_info, /* Passed to driver */
         },
 };
+#endif
 
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
@@ -537,10 +537,7 @@ static int __init ezkit_init(void)
         SSYNC();
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        spi_register_board_info(bfin_spi_board_info,
-                                ARRAY_SIZE(bfin_spi_board_info));
-#endif
+        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
         irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index ef2db8fd102a..5933656db5a2 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -38,7 +38,6 @@
  */
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S
index 81ba28ad2207..53deeb5d7e87 100644
--- a/arch/frv/kernel/cmode.S
+++ b/arch/frv/kernel/cmode.S
@@ -1,7 +1,7 @@
 /* cmode.S: clock mode management
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/frv/kernel/init_task.c b/arch/frv/kernel/init_task.c
index 22993932b3fc..e2198815b630 100644
--- a/arch/frv/kernel/init_task.c
+++ b/arch/frv/kernel/init_task.c
@@ -11,7 +11,6 @@
 
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S
index c9b2d51ab9ad..f67bf73cd2cc 100644
--- a/arch/frv/kernel/sleep.S
+++ b/arch/frv/kernel/sleep.S
@@ -1,7 +1,7 @@
 /* sleep.S: power saving mode entry
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 4985466b1a7c..64ee58d748be 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -1,7 +1,7 @@
 /* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index b841ecfd5d5a..9af7740f32fb 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <linux/bootmem.h>
 #include <linux/highmem.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 #include <asm/segment.h>
@@ -56,7 +57,9 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
  */
 static unsigned long empty_bad_page_table;
 static unsigned long empty_bad_page;
+
 unsigned long empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
 
 /*****************************************************************************/
 /*
diff --git a/arch/h8300/kernel/init_task.c b/arch/h8300/kernel/init_task.c
index 19272c2ac56a..93a4899e46c2 100644
--- a/arch/h8300/kernel/init_task.c
+++ b/arch/h8300/kernel/init_task.c
@@ -13,7 +13,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 0df5f6f75edf..16be41446b5b 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -135,6 +135,7 @@ config IA64_GENERIC
           HP-zx1/sx1000         For HP systems
           HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
           SGI-SN2               For SGI Altix systems
+          SGI-UV                For SGI UV systems
           Ski-simulator         For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
 
           If you don't know what to do, choose "generic".
@@ -170,6 +171,18 @@ config IA64_SGI_SN2
           to select this option.  If in doubt, select ia64 generic support
           instead.
 
+config IA64_SGI_UV`
+        bool "SGI-UV`"
+        select NUMA
+        select ACPI_NUMA
+        select SWIOTLB
+        help
+          Selecting this option will optimize the kernel for use on UV based
+          systems, but the resulting kernel binary will not run on other
+          types of ia64 systems.  If you have an SGI UV system, it's safe
+          to select this option.  If in doubt, select ia64 generic support
+          instead.
+
 config IA64_HP_SIM
         bool "Ski-simulator"
         select SWIOTLB
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index ec4cca477f49..e67ee3f27698 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -57,13 +57,14 @@ core-$(CONFIG_IA64_GENERIC) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1)      += arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
 core-$(CONFIG_IA64_SGI_SN2)     += arch/ia64/sn/
+core-$(CONFIG_IA64_SGI_UV)      += arch/ia64/uv/
 core-$(CONFIG_KVM)              += arch/ia64/kvm/
 
 drivers-$(CONFIG_PCI)           += arch/ia64/pci/
 drivers-$(CONFIG_IA64_HP_SIM)   += arch/ia64/hp/sim/
 drivers-$(CONFIG_IA64_HP_ZX1)   += arch/ia64/hp/common/ arch/ia64/hp/zx1/
 drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
-drivers-$(CONFIG_IA64_GENERIC)  += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/
+drivers-$(CONFIG_IA64_GENERIC)  += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/ arch/ia64/uv/
 drivers-$(CONFIG_OPROFILE)      += arch/ia64/oprofile/
 
 boot := arch/ia64/hp/sim/boot
diff --git a/arch/ia64/ia32/ia32_support.c b/arch/ia64/ia32/ia32_support.c
index 896b1ebbfb26..a6965ddafc46 100644
--- a/arch/ia64/ia32/ia32_support.c
+++ b/arch/ia64/ia32/ia32_support.c
@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <linux/personality.h>
 #include <linux/sched.h>
 
 #include <asm/intrinsics.h>
@@ -29,7 +28,6 @@
 
 extern int die_if_kernel (char *str, struct pt_regs *regs, long err);
 
-struct exec_domain ia32_exec_domain;
 struct page *ia32_shared_page[NR_CPUS];
 unsigned long *ia32_boot_gdt;
 unsigned long *cpu_gdt_table[NR_CPUS];
@@ -240,14 +238,6 @@ ia32_cpu_init (void)
 static int __init
 ia32_init (void)
 {
-        ia32_exec_domain.name = "Linux/x86";
-        ia32_exec_domain.handler = NULL;
-        ia32_exec_domain.pers_low = PER_LINUX32;
-        ia32_exec_domain.pers_high = PER_LINUX32;
-        ia32_exec_domain.signal_map = default_exec_domain.signal_map;
-        ia32_exec_domain.signal_invmap = default_exec_domain.signal_invmap;
-        register_exec_domain(&ia32_exec_domain);
-
 #if PAGE_SHIFT > IA32_PAGE_SHIFT
         {
                 extern struct kmem_cache *ia64_partial_page_cachep;
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 19709a079635..43687cc60dfb 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -117,7 +117,10 @@ acpi_get_sysname(void)
         if (!strcmp(hdr->oem_id, "HP")) {
                 return "hpzx1";
         } else if (!strcmp(hdr->oem_id, "SGI")) {
-                return "sn2";
+                if (!strcmp(hdr->oem_table_id + 4, "UV"))
+                        return "uv";
+                else
+                        return "sn2";
         }
 
         return "dig";
@@ -130,6 +133,8 @@ acpi_get_sysname(void)
         return "hpzx1_swiotlb";
 # elif defined (CONFIG_IA64_SGI_SN2)
         return "sn2";
+# elif defined (CONFIG_IA64_SGI_UV)
+        return "uv";
 # elif defined (CONFIG_IA64_DIG)
         return "dig";
 # else
@@ -460,7 +465,6 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
                 printk(KERN_ERR
                        "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
                        len, slit->header.length);
-                memset(numa_slit, 10, sizeof(numa_slit));
                 return;
         }
         slit_table = slit;
@@ -569,8 +573,14 @@ void __init acpi_numa_arch_fixup(void)
         printk(KERN_INFO "Number of memory chunks in system = %d\n",
                num_node_memblks);
 
-        if (!slit_table)
+        if (!slit_table) {
+                for (i = 0; i < MAX_NUMNODES; i++)
+                        for (j = 0; j < MAX_NUMNODES; j++)
+                                node_distance(i, j) = i == j ? LOCAL_DISTANCE :
+                                                        REMOTE_DISTANCE;
                 return;
+        }
+
         memset(numa_slit, -1, sizeof(numa_slit));
         for (i = 0; i < slit_table->locality_count; i++) {
                 if (!pxm_bit_test(i))
@@ -622,6 +632,9 @@ void acpi_unregister_gsi(u32 gsi)
         if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
                 return;
 
+        if (has_8259 && gsi < 16)
+                return;
+
         iosapic_unregister_intr(gsi);
 }
 
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index e49ad8c5dc69..ca2bb95726de 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1156,6 +1156,9 @@ skip_rbs_switch:
          *      r31 = current->thread_info->flags
          * On exit:
          *      p6 = TRUE if work-pending-check needs to be redone
+         *
+         * Interrupts are disabled on entry, reenabled depend on work, and
+         * disabled on exit.
          */
 .work_pending_syscall:
         add r2=-8,r2
@@ -1164,16 +1167,16 @@ skip_rbs_switch:
         st8 [r2]=r8
         st8 [r3]=r10
 .work_pending:
-        tbit.z p6,p0=r31,TIF_NEED_RESCHED               // current_thread_info()->need_resched==0?
+        tbit.z p6,p0=r31,TIF_NEED_RESCHED       // is resched not needed?
 (p6)    br.cond.sptk.few .notify
 #ifdef CONFIG_PREEMPT
 (pKStk) dep r21=-1,r0,PREEMPT_ACTIVE_BIT,1
         ;;
 (pKStk) st4 [r20]=r21
-        ssm psr.i               // enable interrupts
 #endif
+        ssm psr.i               // enable interrupts
         br.call.spnt.many rp=schedule
-.ret9:  cmp.eq p6,p0=r0,r0                              // p6 <- 1
+.ret9:  cmp.eq p6,p0=r0,r0      // p6 <- 1 (re-check)
         rsm psr.i               // disable interrupts
         ;;
 #ifdef CONFIG_PREEMPT
@@ -1182,13 +1185,13 @@ skip_rbs_switch:
 (pKStk) st4 [r20]=r0            // preempt_count() <- 0
 #endif
 (pLvSys)br.cond.sptk.few  .work_pending_syscall_end
-        br.cond.sptk.many .work_processed_kernel        // re-check
+        br.cond.sptk.many .work_processed_kernel
 
 .notify:
 (pUStk) br.call.spnt.many rp=notify_resume_user
-.ret10: cmp.ne p6,p0=r0,r0                              // p6 <- 0
+.ret10: cmp.ne p6,p0=r0,r0      // p6 <- 0 (don't re-check)
 (pLvSys)br.cond.sptk.few  .work_pending_syscall_end
-        br.cond.sptk.many .work_processed_kernel        // don't re-check
+        br.cond.sptk.many .work_processed_kernel
 
 .work_pending_syscall_end:
         adds r2=PT(R8)+16,r12
@@ -1196,7 +1199,7 @@ skip_rbs_switch:
         ;;
         ld8 r8=[r2]
         ld8 r10=[r3]
-        br.cond.sptk.many .work_processed_syscall       // re-check
+        br.cond.sptk.many .work_processed_syscall
 
 END(ia64_leave_kernel)
 
@@ -1234,9 +1237,12 @@ GLOBAL_ENTRY(ia64_invoke_schedule_tail)
 END(ia64_invoke_schedule_tail)
 
         /*
-         * Setup stack and call do_notify_resume_user().  Note that pSys and pNonSys need to
-         * be set up by the caller.  We declare 8 input registers so the system call
-         * args get preserved, in case we need to restart a system call.
+         * Setup stack and call do_notify_resume_user(), keeping interrupts
+         * disabled.
+         *
+         * Note that pSys and pNonSys need to be set up by the caller.
+         * We declare 8 input registers so the system call args get preserved,
+         * in case we need to restart a system call.
          */
 ENTRY(notify_resume_user)
         .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
diff --git a/arch/ia64/kernel/init_task.c b/arch/ia64/kernel/init_task.c
index bc8efcad28b8..9d7e1c66faf4 100644
--- a/arch/ia64/kernel/init_task.c
+++ b/arch/ia64/kernel/init_task.c
@@ -18,7 +18,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 6678c49daba3..80b44ea052d7 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -1076,48 +1076,6 @@ END(ia64_syscall_setup)
         DBG_FAULT(15)
         FAULT(15)
 
-        /*
-         * Squatting in this space ...
-         *
-         * This special case dispatcher for illegal operation faults allows preserved
-         * registers to be modified through a callback function (asm only) that is handed
-         * back from the fault handler in r8. Up to three arguments can be passed to the
-         * callback function by returning an aggregate with the callback as its first
-         * element, followed by the arguments.
-         */
-ENTRY(dispatch_illegal_op_fault)
-        .prologue
-        .body
-        SAVE_MIN_WITH_COVER
-        ssm psr.ic | PSR_DEFAULT_BITS
-        ;;
-        srlz.i          // guarantee that interruption collection is on
-        ;;
-(p15)   ssm psr.i       // restore psr.i
-        adds r3=8,r2    // set up second base pointer for SAVE_REST
-        ;;
-        alloc r14=ar.pfs,0,0,1,0        // must be first in insn group
-        mov out0=ar.ec
-        ;;
-        SAVE_REST
-        PT_REGS_UNWIND_INFO(0)
-        ;;
-        br.call.sptk.many rp=ia64_illegal_op_fault
-.ret0:  ;;
-        alloc r14=ar.pfs,0,0,3,0        // must be first in insn group
-        mov out0=r9
-        mov out1=r10
-        mov out2=r11
-        movl r15=ia64_leave_kernel
-        ;;
-        mov rp=r15
-        mov b6=r8
-        ;;
-        cmp.ne p6,p0=0,r8
-(p6)    br.call.dpnt.many b6=b6         // call returns to ia64_leave_kernel
-        br.sptk.many ia64_leave_kernel
-END(dispatch_illegal_op_fault)
-
         .org ia64_ivt+0x4000
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4000 Entry 16 (size 64 bundles) Reserved
@@ -1715,6 +1673,48 @@ END(ia32_interrupt)
         DBG_FAULT(67)
         FAULT(67)
 
+        /*
+         * Squatting in this space ...
+         *
+         * This special case dispatcher for illegal operation faults allows preserved
+         * registers to be modified through a callback function (asm only) that is handed
+         * back from the fault handler in r8. Up to three arguments can be passed to the
+         * callback function by returning an aggregate with the callback as its first
+         * element, followed by the arguments.
+         */
+ENTRY(dispatch_illegal_op_fault)
+        .prologue
+        .body
+        SAVE_MIN_WITH_COVER
+        ssm psr.ic | PSR_DEFAULT_BITS
+        ;;
+        srlz.i          // guarantee that interruption collection is on
+        ;;
+(p15)   ssm psr.i       // restore psr.i
+        adds r3=8,r2    // set up second base pointer for SAVE_REST
+        ;;
+        alloc r14=ar.pfs,0,0,1,0        // must be first in insn group
+        mov out0=ar.ec
+        ;;
+        SAVE_REST
+        PT_REGS_UNWIND_INFO(0)
+        ;;
+        br.call.sptk.many rp=ia64_illegal_op_fault
+.ret0:  ;;
+        alloc r14=ar.pfs,0,0,3,0        // must be first in insn group
+        mov out0=r9
+        mov out1=r10
+        mov out2=r11
+        movl r15=ia64_leave_kernel
+        ;;
+        mov rp=r15
+        mov b6=r8
+        ;;
+        cmp.ne p6,p0=0,r8
+(p6)    br.call.dpnt.many b6=b6         // call returns to ia64_leave_kernel
+        br.sptk.many ia64_leave_kernel
+END(dispatch_illegal_op_fault)
+
 #ifdef CONFIG_IA32_SUPPORT
 
         /*
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 7c548ac52bbc..74b6d670aaef 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -15,6 +15,9 @@
 #define ACCOUNT_SYS_ENTER
 #endif
 
+.section ".data.patch.rse", "a"
+.previous
+
 /*
  * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
  * the minimum state necessary that allows us to turn psr.ic back
@@ -40,7 +43,7 @@
  * Note that psr.ic is NOT turned on by this macro.  This is so that
  * we can pass interruption state as arguments to a handler.
  */
-#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA)                                                       \
+#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND)                                            \
         mov r16=IA64_KR(CURRENT);       /* M */                                                 \
         mov r27=ar.rsc;                 /* M */                                                 \
         mov r20=r1;                     /* A */                                                 \
@@ -87,6 +90,7 @@
         tbit.nz p15,p0=r29,IA64_PSR_I_BIT;                                                      \
         mov r29=b0                                                                              \
         ;;                                                                                      \
+        WORKAROUND;                                                                             \
         adds r16=PT(R8),r1;     /* initialize first base pointer */                             \
         adds r17=PT(R9),r1;     /* initialize second base pointer */                            \
 (pKStk) mov r18=r0;             /* make sure r18 isn't NaT */                                   \
@@ -206,6 +210,40 @@
         st8 [r25]=r10;          /* ar.ssd */    \
         ;;
 
-#define SAVE_MIN_WITH_COVER     DO_SAVE_MIN(cover, mov r30=cr.ifs,)
-#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19)
-#define SAVE_MIN                DO_SAVE_MIN(     , mov r30=r0, )
+#define RSE_WORKAROUND                          \
+(pUStk) extr.u r17=r18,3,6;                     \
+(pUStk) sub r16=r18,r22;                        \
+[1:](pKStk)     br.cond.sptk.many 1f;           \
+        .xdata4 ".data.patch.rse",1b-.          \
+        ;;                                      \
+        cmp.ge p6,p7 = 33,r17;                  \
+        ;;                                      \
+(p6)    mov r17=0x310;                          \
+(p7)    mov r17=0x308;                          \
+        ;;                                      \
+        cmp.leu p1,p0=r16,r17;                  \
+(p1)    br.cond.sptk.many 1f;                   \
+        dep.z r17=r26,0,62;                     \
+        movl r16=2f;                            \
+        ;;                                      \
+        mov ar.pfs=r17;                         \
+        dep r27=r0,r27,16,14;                   \
+        mov b0=r16;                             \
+        ;;                                      \
+        br.ret.sptk b0;                         \
+        ;;                                      \
+2:                                              \
+        mov ar.rsc=r0                           \
+        ;;                                      \
+        flushrs;                                \
+        ;;                                      \
+        mov ar.bspstore=r22                     \
+        ;;                                      \
+        mov r18=ar.bsp;                         \
+        ;;                                      \
+1:                                              \
+        .pred.rel "mutex", pKStk, pUStk
+
+#define SAVE_MIN_WITH_COVER     DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
+#define SAVE_MIN                        DO_SAVE_MIN(     , mov r30=r0, , )
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 4547a2092af9..9dc00f7fe10e 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -900,12 +900,6 @@ static void
 palinfo_smp_call(void *info)
 {
         palinfo_smp_data_t *data = (palinfo_smp_data_t *)info;
-        if (data == NULL) {
-                printk(KERN_ERR "palinfo: data pointer is NULL\n");
-                data->ret = 0; /* no output */
-                return;
-        }
-        /* does this actual call */
         data->ret = (*data->func)(data->page);
 }
 
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index e0dca8743dbb..b83b2c516008 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -115,6 +115,29 @@ ia64_patch_vtop (unsigned long start, unsigned long end)
         ia64_srlz_i();
 }
 
+/*
+ * Disable the RSE workaround by turning the conditional branch
+ * that we tagged in each place the workaround was used into an
+ * unconditional branch.
+ */
+void __init
+ia64_patch_rse (unsigned long start, unsigned long end)
+{
+        s32 *offp = (s32 *) start;
+        u64 ip, *b;
+
+        while (offp < (s32 *) end) {
+                ip = (u64) offp + *offp;
+
+                b = (u64 *)(ip & -16);
+                b[1] &= ~0xf800000L;
+                ia64_fc((void *) ip);
+                ++offp;
+        }
+        ia64_sync_i();
+        ia64_srlz_i();
+}
+
 void __init
 ia64_patch_mckinley_e9 (unsigned long start, unsigned long end)
 {
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index c1ad27de2dd2..7714a97b0104 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -1864,11 +1864,6 @@ pfm_flush(struct file *filp, fl_owner_t id)
          * invoked after, it will find an empty queue and no
          * signal will be sent. In both case, we are safe
          */
-        if (filp->f_flags & FASYNC) {
-                DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
-                pfm_do_fasync (-1, filp, ctx, 0);
-        }
-
         PROTECT_CTX(ctx, flags);
 
         state     = ctx->ctx_state;
@@ -1999,6 +1994,11 @@ pfm_close(struct inode *inode, struct file *filp)
                 return -EBADF;
         }
 
+        if (filp->f_flags & FASYNC) {
+                DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
+                pfm_do_fasync(-1, filp, ctx, 0);
+        }
+
         PROTECT_CTX(ctx, flags);
 
         state     = ctx->ctx_state;
@@ -5013,12 +5013,13 @@ pfm_context_force_terminate(pfm_context_t *ctx, struct pt_regs *regs)
 }
 
 static int pfm_ovfl_notify_user(pfm_context_t *ctx, unsigned long ovfl_pmds);
+
  /*
   * pfm_handle_work() can be called with interrupts enabled
   * (TIF_NEED_RESCHED) or disabled. The down_interruptible
   * call may sleep, therefore we must re-enable interrupts
   * to avoid deadlocks. It is safe to do so because this function
-  * is called ONLY when returning to user level (PUStk=1), in which case
+  * is called ONLY when returning to user level (pUStk=1), in which case
   * there is no risk of kernel stack overflow due to deep
   * interrupt nesting.
   */
@@ -5034,7 +5035,8 @@ pfm_handle_work(void)
 
         ctx = PFM_GET_CTX(current);
         if (ctx == NULL) {
-                printk(KERN_ERR "perfmon: [%d] has no PFM context\n", task_pid_nr(current));
+                printk(KERN_ERR "perfmon: [%d] has no PFM context\n",
+                        task_pid_nr(current));
                 return;
         }
 
@@ -5058,11 +5060,12 @@ pfm_handle_work(void)
         /*
          * must be done before we check for simple-reset mode
          */
-        if (ctx->ctx_fl_going_zombie || ctx->ctx_state == PFM_CTX_ZOMBIE) goto do_zombie;
-
+        if (ctx->ctx_fl_going_zombie || ctx->ctx_state == PFM_CTX_ZOMBIE)
+                goto do_zombie;
 
         //if (CTX_OVFL_NOBLOCK(ctx)) goto skip_blocking;
-        if (reason == PFM_TRAP_REASON_RESET) goto skip_blocking;
+        if (reason == PFM_TRAP_REASON_RESET)
+                goto skip_blocking;
 
         /*
          * restore interrupt mask to what it was on entry.
@@ -5110,7 +5113,8 @@ do_zombie:
         /*
          * in case of interruption of down() we don't restart anything
          */
-        if (ret < 0) goto nothing_to_do;
+        if (ret < 0)
+                goto nothing_to_do;
 
 skip_blocking:
         pfm_resume_after_ovfl(ctx, ovfl_regs, regs);
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 58dcfac5ea88..a3a34b4eb038 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -167,11 +167,18 @@ void tsk_clear_notify_resume(struct task_struct *tsk)
         clear_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME);
 }
 
+/*
+ * do_notify_resume_user():
+ *      Called from notify_resume_user at entry.S, with interrupts disabled.
+ */
 void
-do_notify_resume_user (sigset_t *unused, struct sigscratch *scr, long in_syscall)
+do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
 {
         if (fsys_mode(current, &scr->pt)) {
-                /* defer signal-handling etc. until we return to privilege-level 0.  */
+                /*
+                 * defer signal-handling etc. until we return to
+                 * privilege-level 0.
+                 */
                 if (!ia64_psr(&scr->pt)->lp)
                         ia64_psr(&scr->pt)->lp = 1;
                 return;
@@ -179,16 +186,26 @@ do_notify_resume_user (sigset_t *unused, struct sigscratch *scr, long in_syscall
 
 #ifdef CONFIG_PERFMON
         if (current->thread.pfm_needs_checking)
+                /*
+                 * Note: pfm_handle_work() allow us to call it with interrupts
+                 * disabled, and may enable interrupts within the function.
+                 */
                 pfm_handle_work();
 #endif
 
         /* deal with pending signal delivery */
-        if (test_thread_flag(TIF_SIGPENDING))
+        if (test_thread_flag(TIF_SIGPENDING)) {
+                local_irq_enable();     /* force interrupt enable */
                 ia64_do_signal(scr, in_syscall);
+        }
 
         /* copy user rbs to kernel rbs */
-        if (unlikely(test_thread_flag(TIF_RESTORE_RSE)))
+        if (unlikely(test_thread_flag(TIF_RESTORE_RSE))) {
+                local_irq_enable();     /* force interrupt enable */
                 ia64_sync_krbs();
+        }
+
+        local_irq_disable();    /* force interrupt disable */
 }
 
 static int pal_halt        = 1;
diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c
index a3022dc48ef8..0464173ea568 100644
--- a/arch/ia64/kernel/sal.c
+++ b/arch/ia64/kernel/sal.c
@@ -229,6 +229,14 @@ static void __init sal_desc_ap_wakeup(void *p) { }
  */
 static int sal_cache_flush_drops_interrupts;
 
+static int __init
+force_pal_cache_flush(char *str)
+{
+        sal_cache_flush_drops_interrupts = 1;
+        return 0;
+}
+early_param("force_pal_cache_flush", force_pal_cache_flush);
+
 void __init
 check_sal_cache_flush (void)
 {
@@ -237,15 +245,17 @@ check_sal_cache_flush (void)
         u64 vector, cache_type = 3;
         struct ia64_sal_retval isrv;
 
+        if (sal_cache_flush_drops_interrupts)
+                return;
+
         cpu = get_cpu();
         local_irq_save(flags);
 
         /*
-         * Schedule a timer interrupt, wait until it's reported, and see if
-         * SAL_CACHE_FLUSH drops it.
+         * Send ourselves a timer interrupt, wait until it's reported, and see
+         * if SAL_CACHE_FLUSH drops it.
          */
-        ia64_set_itv(IA64_TIMER_VECTOR);
-        ia64_set_itm(ia64_get_itc() + 1000);
+        platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
 
         while (!ia64_get_irr(IA64_TIMER_VECTOR))
                 cpu_relax();
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 5015ca1275ca..f48a809c686d 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -239,6 +239,25 @@ __initcall(register_memory);
 
 
 #ifdef CONFIG_KEXEC
+
+/*
+ * This function checks if the reserved crashkernel is allowed on the specific
+ * IA64 machine flavour. Machines without an IO TLB use swiotlb and require
+ * some memory below 4 GB (i.e. in 32 bit area), see the implementation of
+ * lib/swiotlb.c. The hpzx1 architecture has an IO TLB but cannot use that
+ * in kdump case. See the comment in sba_init() in sba_iommu.c.
+ *
+ * So, the only machvec that really supports loading the kdump kernel
+ * over 4 GB is "sn2".
+ */
+static int __init check_crashkernel_memory(unsigned long pbase, size_t size)
+{
+        if (ia64_platform_is("sn2") || ia64_platform_is("uv"))
+                return 1;
+        else
+                return pbase < (1UL << 32);
+}
+
 static void __init setup_crashkernel(unsigned long total, int *n)
 {
         unsigned long long base = 0, size = 0;
@@ -252,6 +271,16 @@ static void __init setup_crashkernel(unsigned long total, int *n)
                         base = kdump_find_rsvd_region(size,
                                         rsvd_region, *n);
                 }
+
+                if (!check_crashkernel_memory(base, size)) {
+                        pr_warning("crashkernel: There would be kdump memory "
+                                "at %ld GB but this is unusable because it "
+                                "must\nbe below 4 GB. Change the memory "
+                                "configuration of the machine.\n",
+                                (unsigned long)(base >> 30));
+                        return;
+                }
+
                 if (base != ~0UL) {
                         printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
                                         "for crashkernel (System RAM: %ldMB)\n",
@@ -531,6 +560,17 @@ setup_arch (char **cmdline_p)
         /* process SAL system table: */
         ia64_sal_init(__va(efi.sal_systab));
 
+#ifdef CONFIG_ITANIUM
+        ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+#else
+        {
+                u64 num_phys_stacked;
+
+                if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96)
+                        ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+        }
+#endif
+
 #ifdef CONFIG_SMP
         cpu_physical_id(0) = hard_smp_processor_id();
 #endif
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 80622acc95de..5929ab10a289 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -156,6 +156,13 @@ SECTIONS
           __end___vtop_patchlist = .;
         }
 
+  .data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
+        {
+          __start___rse_patchlist = .;
+          *(.data.patch.rse)
+          __end___rse_patchlist = .;
+        }
+
   .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
         {
           __start___mckinley_e9_bundles = .;
diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile
index 52353397a1a4..112791dd2542 100644
--- a/arch/ia64/kvm/Makefile
+++ b/arch/ia64/kvm/Makefile
@@ -7,7 +7,6 @@ offsets-file := asm-offsets.h
 always  := $(offsets-file)
 targets := $(offsets-file)
 targets += arch/ia64/kvm/asm-offsets.s
-clean-files := $(addprefix $(objtree)/,$(targets) $(obj)/memcpy.S $(obj)/memset.S)
 
 # Default sed regexp - multiline due to syntax constraints
 define sed-y
@@ -54,5 +53,5 @@ EXTRA_CFLAGS_vcpu.o += -mfixed-range=f2-f5,f12-f127
 kvm-intel-objs = vmm.o vmm_ivt.o trampoline.o vcpu.o optvfault.o mmio.o \
         vtlb.o process.o
 #Add link memcpy and memset to avoid possible structure assignment error
-kvm-intel-objs += ../lib/memset.o ../lib/memcpy.o
+kvm-intel-objs += memcpy.o memset.o
 obj-$(CONFIG_KVM_INTEL) += kvm-intel.o
diff --git a/arch/ia64/kvm/memcpy.S b/arch/ia64/kvm/memcpy.S
new file mode 100644
index 000000000000..c04cdbe9f80f
--- /dev/null
+++ b/arch/ia64/kvm/memcpy.S
@@ -0,0 +1 @@
+#include "../lib/memcpy.S"
diff --git a/arch/ia64/kvm/memset.S b/arch/ia64/kvm/memset.S
new file mode 100644
index 000000000000..83c3066d844a
--- /dev/null
+++ b/arch/ia64/kvm/memset.S
@@ -0,0 +1 @@
+#include "../lib/memset.S"
diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c
index 351bf70da463..7f1a858bc69f 100644
--- a/arch/ia64/kvm/mmio.c
+++ b/arch/ia64/kvm/mmio.c
@@ -159,7 +159,8 @@ static void mmio_access(struct kvm_vcpu *vcpu, u64 src_pa, u64 *dest,
 
         if (p->u.ioreq.state == STATE_IORESP_READY) {
                 if (dir == IOREQ_READ)
-                        *dest = p->u.ioreq.data;
+                        /* it's necessary to ensure zero extending */
+                        *dest = p->u.ioreq.data & (~0UL >> (64-(s*8)));
         } else
                 panic_vm(vcpu);
 out:
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index fc6c6636ffda..200100ea7610 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -719,3 +719,28 @@ out:
 EXPORT_SYMBOL_GPL(remove_memory);
 #endif /* CONFIG_MEMORY_HOTREMOVE */
 #endif
+
+/*
+ * Even when CONFIG_IA32_SUPPORT is not enabled it is
+ * useful to have the Linux/x86 domain registered to
+ * avoid an attempted module load when emulators call
+ * personality(PER_LINUX32). This saves several milliseconds
+ * on each such call.
+ */
+static struct exec_domain ia32_exec_domain;
+
+static int __init
+per_linux32_init(void)
+{
+        ia32_exec_domain.name = "Linux/x86";
+        ia32_exec_domain.handler = NULL;
+        ia32_exec_domain.pers_low = PER_LINUX32;
+        ia32_exec_domain.pers_high = PER_LINUX32;
+        ia32_exec_domain.signal_map = default_exec_domain.signal_map;
+        ia32_exec_domain.signal_invmap = default_exec_domain.signal_invmap;
+        register_exec_domain(&ia32_exec_domain);
+
+        return 0;
+}
+
+__initcall(per_linux32_init);
diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
index 49d3120415eb..6dd886c5d860 100644
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c
@@ -512,6 +512,8 @@ static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, si
         int cpu;
         char optstr[64];
 
+        if (count > sizeof(optstr))
+                return -EINVAL;
         if (copy_from_user(optstr, user, count))
                 return -EFAULT;
         optstr[count - 1] = '\0';
diff --git a/arch/ia64/uv/Makefile b/arch/ia64/uv/Makefile
new file mode 100644
index 000000000000..aa9f91947c49
--- /dev/null
+++ b/arch/ia64/uv/Makefile
@@ -0,0 +1,12 @@
+# arch/ia64/uv/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+#
+# Makefile for the sn uv subplatform
+#
+
+obj-y += kernel/
diff --git a/arch/ia64/uv/kernel/Makefile b/arch/ia64/uv/kernel/Makefile
new file mode 100644
index 000000000000..8d92b4684d8e
--- /dev/null
+++ b/arch/ia64/uv/kernel/Makefile
@@ -0,0 +1,13 @@
+# arch/ia64/uv/kernel/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+EXTRA_CFLAGS += -Iarch/ia64/sn/include
+
+obj-y                           += setup.o
+obj-$(CONFIG_IA64_GENERIC)      += machvec.o
diff --git a/arch/ia64/uv/kernel/machvec.c b/arch/ia64/uv/kernel/machvec.c
new file mode 100644
index 000000000000..50737a9dca74
--- /dev/null
+++ b/arch/ia64/uv/kernel/machvec.c
@@ -0,0 +1,11 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#define MACHVEC_PLATFORM_NAME   uv
+#define MACHVEC_PLATFORM_HEADER <asm/machvec_uv.h>
+#include <asm/machvec_init.h>
diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c
new file mode 100644
index 000000000000..cf5f28ae96c4
--- /dev/null
+++ b/arch/ia64/uv/kernel/setup.c
@@ -0,0 +1,110 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV Core Functions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <asm/sn/simulator.h>
+#include <asm/uv/uv_mmrs.h>
+#include <asm/uv/uv_hub.h>
+
+DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+
+#ifdef CONFIG_IA64_SGI_UV
+int sn_prom_type;
+#endif
+
+struct redir_addr {
+        unsigned long redirect;
+        unsigned long alias;
+};
+
+#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
+
+static __initdata struct redir_addr redir_addrs[] = {
+        {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
+        {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
+        {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+};
+
+static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
+{
+        union uvh_si_alias0_overlay_config_u alias;
+        union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
+                alias.v = uv_read_local_mmr(redir_addrs[i].alias);
+                if (alias.s.base == 0) {
+                        *size = (1UL << alias.s.m_alias);
+                        redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
+                        *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
+                        return;
+                }
+        }
+        BUG();
+}
+
+void __init uv_setup(char **cmdline_p)
+{
+        union uvh_si_addr_map_config_u m_n_config;
+        union uvh_node_id_u node_id;
+        unsigned long gnode_upper;
+        int nid, cpu, m_val, n_val;
+        unsigned long mmr_base, lowmem_redir_base, lowmem_redir_size;
+
+        if (IS_MEDUSA()) {
+                lowmem_redir_base = 0;
+                lowmem_redir_size = 0;
+                node_id.v = 0;
+                m_n_config.s.m_skt = 37;
+                m_n_config.s.n_skt = 0;
+                mmr_base = 0;
+#if 0
+                /* Need BIOS calls - TDB */
+                if (!ia64_sn_is_fake_prom())
+                        sn_prom_type = 1;
+                else
+#endif
+                        sn_prom_type = 2;
+                printk(KERN_INFO "Running on medusa with %s PROM\n",
+                                        (sn_prom_type == 1) ? "real" : "fake");
+        } else {
+                get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
+                node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+                m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+                mmr_base =
+                        uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
+                                ~UV_MMR_ENABLE;
+        }
+
+        m_val = m_n_config.s.m_skt;
+        n_val = m_n_config.s.n_skt;
+        printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
+
+        gnode_upper = (((unsigned long)node_id.s.node_id) &
+                       ~((1 << n_val) - 1)) << m_val;
+
+        for_each_present_cpu(cpu) {
+                nid = cpu_to_node(cpu);
+                uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
+                uv_cpu_hub_info(cpu)->lowmem_remap_top =
+                        lowmem_redir_base + lowmem_redir_size;
+                uv_cpu_hub_info(cpu)->m_val = m_val;
+                uv_cpu_hub_info(cpu)->n_val = m_val;
+                uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) -1;
+                uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+                uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
+                uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
+                uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */
+                printk(KERN_DEBUG "UV cpu %d, nid %d\n", cpu, nid);
+        }
+}
+
diff --git a/arch/m32r/kernel/init_task.c b/arch/m32r/kernel/init_task.c
index 9e508fd9d970..0d658dbb6766 100644
--- a/arch/m32r/kernel/init_task.c
+++ b/arch/m32r/kernel/init_task.c
@@ -12,7 +12,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 65db2261b9ea..55ea52fe6aca 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -44,7 +44,7 @@ config GENERIC_IOMAP
 
 config ARCH_MAY_HAVE_PC_FDC
         bool
-        depends on Q40 || (BROKEN && SUN3X)
+        depends on BROKEN && (Q40 || SUN3X)
         default y
 
 config NO_IOPORT
@@ -539,13 +539,6 @@ config AMIGA_BUILTIN_SERIAL
 
           To compile this driver as a module, choose M here.
 
-config WHIPPET_SERIAL
-        tristate "Hisoft Whippet PCMCIA serial support"
-        depends on AMIGA_PCMCIA
-        help
-          HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
-          is no listing for the Whippet in their Amiga section.
-
 config MULTIFACE_III_TTY
         tristate "Multiface Card III serial support"
         depends on AMIGA
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index e41958371367..8e2a0f5faf53 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:06 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -141,6 +144,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -222,8 +226,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -239,6 +245,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -317,6 +324,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -410,8 +419,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -477,27 +484,12 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -626,6 +618,7 @@ CONFIG_APNE=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -707,6 +700,7 @@ CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_SPACEBALL is not set
 # CONFIG_JOYSTICK_STINGER is not set
 # CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
 # CONFIG_JOYSTICK_DB9 is not set
 # CONFIG_JOYSTICK_GAMECON is not set
 # CONFIG_JOYSTICK_TURBOGRAFX is not set
@@ -731,6 +725,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 CONFIG_A2232=m
 
@@ -757,12 +752,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -779,12 +769,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -802,8 +802,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -859,19 +859,15 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
 # Character devices
 #
 CONFIG_AMIGA_BUILTIN_SERIAL=y
-# CONFIG_WHIPPET_SERIAL is not set
 CONFIG_MULTIFACE_III_TTY=m
 # CONFIG_SERIAL_CONSOLE is not set
 
@@ -894,16 +890,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -975,12 +970,10 @@ CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1054,6 +1047,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1073,53 +1067,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -1127,9 +1150,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index e61196cd7fa5..e2d511e2a1d1 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:07 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -141,6 +144,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -220,8 +224,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -237,6 +243,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -315,6 +322,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -408,8 +417,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -539,6 +546,7 @@ CONFIG_APOLLO_ELPLUS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -622,6 +630,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -643,12 +652,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -665,12 +669,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -688,8 +702,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -737,11 +751,8 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -769,16 +780,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -850,12 +860,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -929,6 +937,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -948,53 +957,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -1002,9 +1040,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index ba7f971bb026..6e20d656adaf 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:09 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -141,6 +144,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -218,8 +222,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -235,6 +241,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -313,6 +320,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -406,8 +415,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -469,11 +476,10 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_FALCON_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -572,6 +578,7 @@ CONFIG_ATARILANCE=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -662,6 +669,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -687,12 +695,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -709,12 +712,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -732,8 +745,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -784,12 +797,9 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -821,16 +831,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -902,12 +911,10 @@ CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -980,6 +987,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -999,53 +1007,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -1053,9 +1090,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index ed98eff708c4..a0a9b30bb502 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:10 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -144,6 +147,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -222,8 +226,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -239,6 +245,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -317,6 +324,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -410,8 +419,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -543,6 +550,7 @@ CONFIG_BVME6000_NET=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -626,6 +634,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -647,12 +656,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -669,12 +673,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -707,11 +721,8 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -739,16 +750,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -820,12 +830,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -900,6 +908,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -919,53 +928,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -973,9 +1011,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=m
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=m
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 38b68c70e567..6778041de262 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:12 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -142,6 +145,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -221,8 +225,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -238,6 +244,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -316,6 +323,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -409,8 +418,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -540,6 +547,7 @@ CONFIG_HPLANCE=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -631,6 +639,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -652,12 +661,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -674,12 +678,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -690,15 +704,15 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -746,11 +760,8 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -776,16 +787,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -857,12 +867,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -936,6 +944,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -955,53 +964,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -1009,9 +1047,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 738bca695a88..7cd375740348 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:14 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -143,6 +146,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -219,8 +223,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -236,6 +242,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -314,6 +321,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -410,8 +419,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -467,11 +474,10 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_MAC_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -520,6 +526,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MAC_SCSI=y
+CONFIG_SCSI_MAC_ESP=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -580,6 +587,7 @@ CONFIG_MACMACE=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -665,6 +673,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -686,12 +695,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -708,12 +712,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -731,8 +745,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 # CONFIG_FB_BACKLIGHT is not set
@@ -783,11 +797,8 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -816,16 +827,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -897,12 +907,10 @@ CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -976,6 +984,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -995,53 +1004,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -1049,9 +1087,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
new file mode 100644
index 000000000000..0747fa3984df
--- /dev/null
+++ b/arch/m68k/configs/multi_defconfig
@@ -0,0 +1,1269 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-multi"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform dependent setup
+#
+# CONFIG_SUN3 is not set
+CONFIG_AMIGA=y
+CONFIG_ATARI=y
+CONFIG_MAC=y
+CONFIG_NUBUS=y
+CONFIG_M68K_L2_CACHE=y
+CONFIG_APOLLO=y
+CONFIG_VME=y
+CONFIG_MVME147=y
+CONFIG_MVME16x=y
+CONFIG_BVME6000=y
+CONFIG_HP300=y
+CONFIG_DIO=y
+CONFIG_SUN3X=y
+CONFIG_Q40=y
+
+#
+# Processor type
+#
+CONFIG_M68020=y
+CONFIG_M68030=y
+CONFIG_M68040=y
+CONFIG_M68060=y
+CONFIG_MMU_MOTOROLA=y
+# CONFIG_M68KFPU_EMU is not set
+# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_ZORRO=y
+CONFIG_AMIGA_PCMCIA=y
+CONFIG_STRAM_PROC=y
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
+CONFIG_ISA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ZORRO_NAMES=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+# CONFIG_COPS is not set
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+CONFIG_PARPORT=m
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_AMIGA=m
+CONFIG_PARPORT_MFC3=m
+CONFIG_PARPORT_ATARI=m
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+CONFIG_AMIGA_FLOPPY=y
+CONFIG_ATARI_FLOPPY=y
+CONFIG_AMIGA_Z2RAM=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_GAYLE=y
+CONFIG_BLK_DEV_IDEDOUBLER=y
+CONFIG_BLK_DEV_BUDDHA=y
+CONFIG_BLK_DEV_FALCON_IDE=y
+CONFIG_BLK_DEV_MAC_IDE=y
+CONFIG_BLK_DEV_Q40IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_A3000_SCSI=y
+CONFIG_A2091_SCSI=y
+CONFIG_GVP11_SCSI=y
+CONFIG_SCSI_A4000T=y
+CONFIG_SCSI_ZORRO7XX=y
+CONFIG_ATARI_SCSI=y
+# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
+# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+CONFIG_MAC_SCSI=y
+CONFIG_SCSI_MAC_ESP=y
+CONFIG_MVME147_SCSI=y
+CONFIG_MVME16x_SCSI=y
+CONFIG_BVME6000_SCSI=y
+CONFIG_SUN3X_ESP=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_MACII=y
+CONFIG_ADB_MACIISI=y
+CONFIG_ADB_IOP=y
+CONFIG_ADB_PMU68K=y
+CONFIG_ADB_CUDA=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_ARIADNE=m
+CONFIG_A2065=m
+CONFIG_HYDRA=m
+CONFIG_ZORRO8390=m
+CONFIG_APNE=m
+CONFIG_APOLLO_ELPLUS=y
+CONFIG_MAC8390=y
+CONFIG_MAC89x0=m
+CONFIG_MACSONIC=m
+CONFIG_MACMACE=y
+CONFIG_MVME147_NET=y
+CONFIG_MVME16x_NET=y
+CONFIG_BVME6000_NET=y
+CONFIG_ATARILANCE=m
+CONFIG_SUN3LANCE=y
+CONFIG_HPLANCE=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NE2000=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SUNKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_AMIGA=y
+CONFIG_ATARI_KBD_CORE=y
+CONFIG_KEYBOARD_ATARI=y
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_AMIGA=m
+CONFIG_MOUSE_ATARI=m
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_HIL=m
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+CONFIG_JOYSTICK_AMIGA=m
+# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_Q40KBD=m
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_A2232=m
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=y
+CONFIG_FB_APOLLO=y
+CONFIG_FB_Q40=y
+CONFIG_FB_AMIGA=y
+CONFIG_FB_AMIGA_OCS=y
+CONFIG_FB_AMIGA_ECS=y
+CONFIG_FB_AMIGA_AGA=y
+CONFIG_FB_FM2=y
+CONFIG_FB_ATARI=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_MAC=y
+CONFIG_FB_HP300=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_PEARL_8x8=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_MAC_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_ATARI=m
+CONFIG_DMASOUND_PAULA=m
+CONFIG_DMASOUND_Q40=m
+CONFIG_DMASOUND=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# Character devices
+#
+CONFIG_ATARI_MFPSER=m
+CONFIG_ATARI_SCC=y
+CONFIG_ATARI_SCC_DMA=y
+CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_DSP56K=m
+CONFIG_AMIGA_BUILTIN_SERIAL=y
+CONFIG_MULTIFACE_III_TTY=m
+CONFIG_MAC_SCC=y
+CONFIG_MAC_HID=y
+CONFIG_MVME147_SCC=y
+CONFIG_SERIAL167=y
+CONFIG_MVME162_SCC=y
+CONFIG_BVME6000_SCC=y
+CONFIG_DN_SERIAL=y
+CONFIG_SERIAL_CONSOLE=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=y
+CONFIG_HFSPLUS_FS=y
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_SYSV68_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index f40b1724254b..e7a8246840b5 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:17 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -144,6 +147,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -222,8 +226,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -239,6 +245,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -317,6 +324,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -410,8 +419,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -542,6 +549,7 @@ CONFIG_MVME147_NET=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -625,6 +633,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -646,12 +655,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -668,12 +672,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -706,11 +720,8 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -738,16 +749,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -819,12 +829,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -899,6 +907,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -918,53 +927,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -972,9 +1010,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index e9ccc774334e..ab536eb172bb 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:19 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -144,6 +147,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -222,8 +226,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -239,6 +245,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -317,6 +324,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -410,8 +419,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -543,6 +550,7 @@ CONFIG_MVME16x_NET=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -626,6 +634,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -647,12 +656,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -669,12 +673,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -707,11 +721,8 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -740,16 +751,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -821,12 +831,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -901,6 +909,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -920,53 +929,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -974,9 +1012,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 165658fe73eb..e05be687b500 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:20 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -12,7 +12,6 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
 CONFIG_ARCH_SUPPORTS_AOUT=y
@@ -53,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -77,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -142,6 +144,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -220,8 +223,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -237,6 +242,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -315,6 +321,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -408,8 +416,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -430,7 +436,6 @@ CONFIG_CONNECTOR=m
 # CONFIG_PARPORT is not set
 # CONFIG_PNP is not set
 CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -467,25 +472,10 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_Q40IDE=y
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -603,6 +593,7 @@ CONFIG_NE2000=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -692,6 +683,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -714,12 +706,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -736,12 +723,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -759,8 +756,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -810,11 +807,8 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -840,16 +834,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -921,12 +914,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -999,6 +990,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1018,53 +1010,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -1072,9 +1093,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index bd2b9c4927c4..296340d2b315 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:22 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -130,6 +133,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -208,8 +212,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -225,6 +231,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -303,6 +310,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -396,8 +405,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -529,6 +536,7 @@ CONFIG_SUN3_82586=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -612,6 +620,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -633,12 +642,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -655,12 +659,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -678,8 +692,8 @@ CONFIG_FB=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -726,11 +740,8 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -756,16 +767,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -837,12 +847,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -917,6 +925,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -936,53 +945,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -990,9 +1028,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index f18154f1ef1f..8d3a416c92bf 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr  2 20:46:23 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,13 +52,14 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@ CONFIG_SLAB=y
 # CONFIG_HAVE_OPROFILE is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -141,6 +144,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -219,8 +223,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -236,6 +242,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -314,6 +321,8 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -407,8 +416,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -539,6 +546,7 @@ CONFIG_SUN3LANCE=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -622,6 +630,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -643,12 +652,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -665,12 +669,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -688,8 +702,8 @@ CONFIG_FB=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -736,11 +750,8 @@ CONFIG_HIDRAW=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -766,16 +777,15 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -847,12 +857,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -927,6 +935,7 @@ CONFIG_DLM=m
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -946,53 +955,82 @@ CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 
@@ -1000,9 +1038,11 @@ CONFIG_CRYPTO_LZO=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index faa6764f1d13..f513f530de91 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -1434,7 +1434,7 @@ L(mmu_fixup_done):
 #endif
 
 #ifdef CONFIG_HP300
-        is_not_hp300(1f)
+        is_not_hp300(2f)
         /*
          * Fix up the iobase register to point to the new location of the LEDs.
          */
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 5de4e4ed76ab..7888cdf91f5d 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -41,7 +41,6 @@
  * setup.
  */
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index bba650312fd9..a9fb83a8c180 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -41,11 +41,12 @@
 #endif
 
 unsigned long m68k_machtype;
-unsigned long m68k_cputype;
 EXPORT_SYMBOL(m68k_machtype);
+unsigned long m68k_cputype;
 EXPORT_SYMBOL(m68k_cputype);
 unsigned long m68k_fputype;
 unsigned long m68k_mmutype;
+EXPORT_SYMBOL(m68k_mmutype);
 #ifdef CONFIG_VME
 unsigned long vme_brdtype;
 EXPORT_SYMBOL(vme_brdtype);
@@ -345,19 +346,19 @@ void __init setup_arch(char **cmdline_p)
 
 /* set ISA defs early as possible */
 #if defined(CONFIG_ISA) && defined(MULTI_ISA)
-#if defined(CONFIG_Q40)
         if (MACH_IS_Q40) {
-                isa_type = Q40_ISA;
+                isa_type = ISA_TYPE_Q40;
                 isa_sex = 0;
         }
-#elif defined(CONFIG_GG2)
+#ifdef CONFIG_GG2
         if (MACH_IS_AMIGA && AMIGAHW_PRESENT(GG2_ISA)) {
-                isa_type = GG2_ISA;
+                isa_type = ISA_TYPE_GG2;
                 isa_sex = 0;
         }
-#elif defined(CONFIG_AMIGA_PCMCIA)
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
         if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)) {
-                isa_type = AG_ISA;
+                isa_type = ISA_TYPE_AG;
                 isa_sex = 1;
         }
 #endif
diff --git a/arch/m68k/lib/string.c b/arch/m68k/lib/string.c
index 891e1347bc4e..4253f870e54f 100644
--- a/arch/m68k/lib/string.c
+++ b/arch/m68k/lib/string.c
@@ -15,6 +15,12 @@ char *strcpy(char *dest, const char *src)
 }
 EXPORT_SYMBOL(strcpy);
 
+char *strcat(char *dest, const char *src)
+{
+        return __kernel_strcpy(dest + __kernel_strlen(dest), src);
+}
+EXPORT_SYMBOL(strcat);
+
 void *memset(void *s, int c, size_t count)
 {
         void *xs = s;
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 07eb4c4bab82..8e8441587c22 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -671,6 +671,9 @@ config ROMKERNEL
 
 endchoice
 
+if COLDFIRE
+source "kernel/Kconfig.preempt"
+endif
 source "mm/Kconfig"
 
 endmenu
diff --git a/arch/m68knommu/kernel/init_task.c b/arch/m68knommu/kernel/init_task.c
index 3897043a126a..344c01aede08 100644
--- a/arch/m68knommu/kernel/init_task.c
+++ b/arch/m68knommu/kernel/init_task.c
@@ -13,7 +13,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 5592e0bf951f..93e69236ed6f 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -114,6 +114,16 @@ SECTIONS {
                 *(__kcrctab_gpl)
                 __stop___kcrctab_gpl = .;
 
+                /* Kernel symbol table: Normal unused symbols */
+                __start___kcrctab_unused = .;
+                *(__kcrctab_unused)
+                __stop___kcrctab_unused = .;
+
+                /* Kernel symbol table: GPL-only unused symbols */
+                __start___kcrctab_unused_gpl = .;
+                *(__kcrctab_unused_gpl)
+                __stop___kcrctab_unused_gpl = .;
+
                 /* Kernel symbol table: GPL-future symbols */
                 __start___kcrctab_gpl_future = .;
                 *(__kcrctab_gpl_future)
diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
index ba5a9f32ebd4..454f25493491 100644
--- a/arch/m68knommu/platform/coldfire/timers.c
+++ b/arch/m68knommu/platform/coldfire/timers.c
@@ -111,7 +111,13 @@ void hw_timer_init(void)
 
         __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
         mcftmr_cycles_per_jiffy = FREQ / HZ;
-        __raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR));
+        /*
+         *      The coldfire timer runs from 0 to TRR included, then 0
+         *      again and so on.  It counts thus actually TRR + 1 steps
+         *      for 1 tick, not TRR.  So if you want n cycles,
+         *      initialize TRR with n - 1.
+         */
+        __raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR));
         __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
                 MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 69648d01acc0..ad36c946ff96 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -538,19 +538,19 @@ cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -Iinclude/asm-mips/mach-sibyte \
 # Sibyte SWARM board
 # Sibyte BCM91x80 (BigSur) board
 #
-libs-$(CONFIG_SIBYTE_CARMEL)    += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CARMEL)    += arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CARMEL)    := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHINE)    += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHINE)    += arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CRHINE)    := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHONE)    += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHONE)    += arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CRHONE)    := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_RHONE)     += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_RHONE)     += arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_RHONE)     := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SENTOSA)   += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SENTOSA)   += arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SENTOSA)   := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SWARM)     += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SWARM)     += arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SWARM)     := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_BIGSUR)    += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_BIGSUR)    += arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_BIGSUR)    := 0xffffffff80100000
 
 #
@@ -565,7 +565,11 @@ load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
 #
 core-$(CONFIG_SNI_RM)           += arch/mips/sni/
 cflags-$(CONFIG_SNI_RM)         += -Iinclude/asm-mips/mach-rm
+ifdef CONFIG_CPU_LITTLE_ENDIAN
 load-$(CONFIG_SNI_RM)           += 0xffffffff80600000
+else
+load-$(CONFIG_SNI_RM)           += 0xffffffff80030000
+endif
 all-$(CONFIG_SNI_RM)            := vmlinux.ecoff
 
 #
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index 90e2d7a46e8e..dd0e19dacfcf 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -1,9 +1,8 @@
 #
-#  Copyright 2000 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#       ppopov@mvista.com or source@mvista.com
+#  Copyright 2000, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
 #
-# Makefile for the Alchemy Au1000 CPU, generic files.
+# Makefile for the Alchemy Au1xx0 CPUs, generic files.
 #
 
 obj-y += prom.o irq.o puts.o time.o reset.o \
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c
index 37a10a01de9d..c7ca1596394c 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/au1000/common/au1xxx_irqmap.c
@@ -40,20 +40,20 @@
 struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
 
 #if defined(CONFIG_SOC_AU1000)
-        { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+        { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -62,32 +62,32 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
         { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-        { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
         { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-        { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
 
 #elif defined(CONFIG_SOC_AU1500)
 
-        { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
         { AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
-        { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
         { AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
-        { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+        { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -100,26 +100,26 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
         { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
         { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-        { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
 
 #elif defined(CONFIG_SOC_AU1100)
 
-        { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+        { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -128,33 +128,33 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
         { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-        { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
         { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-        { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
-        /*{ AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0},*/
-        { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+        /* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */
+        { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
 
 #elif defined(CONFIG_SOC_AU1550)
 
-        { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
         { AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
-        { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
         { AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
         { AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
-        { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -163,26 +163,26 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
         { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-        { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
+        { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
-        { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
 
 #elif defined(CONFIG_SOC_AU1200)
 
-        { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 },
-        { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 },
-        { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 },
-        { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 },
         { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -191,10 +191,10 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
         { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-        { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
+        { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 },
         { AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
-        { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
-        { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0},
+        { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
+        { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 },
 
 #else
 #error "Error: Unknown Alchemy SOC"
@@ -203,4 +203,3 @@ struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
 };
 
 int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
-
diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c
index 3ce6cace0eb0..043429d17c5f 100644
--- a/arch/mips/au1000/common/clocks.c
+++ b/arch/mips/au1000/common/clocks.c
@@ -1,10 +1,9 @@
 /*
  * BRIEF MODULE DESCRIPTION
- *      Simple Au1000 clocks routines.
+ *      Simple Au1xx0 clocks routines.
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -30,8 +29,8 @@
 #include <linux/module.h>
 #include <asm/mach-au1x00/au1000.h>
 
-static unsigned int au1x00_clock; // Hz
-static unsigned int lcd_clock;    // KHz
+static unsigned int au1x00_clock; /*  Hz */
+static unsigned int lcd_clock;    /* KHz */
 static unsigned long uart_baud_base;
 
 /*
@@ -46,8 +45,7 @@ unsigned int get_au1x00_speed(void)
 {
         return au1x00_clock;
 }
-
-
+EXPORT_SYMBOL(get_au1x00_speed);
 
 /*
  * The UART baud base is not known at compile time ... if
@@ -73,24 +71,23 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
 void set_au1x00_lcd_clock(void)
 {
         unsigned int static_cfg0;
-        unsigned int sys_busclk =
-                (get_au1x00_speed()/1000) /
-                ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2);
+        unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
+                                  ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
 
         static_cfg0 = au_readl(MEM_STCFG0);
 
-        if (static_cfg0 & (1<<11))
+        if (static_cfg0 & (1 << 11))
                 lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
         else
                 lcd_clock = sys_busclk / 4;
 
         if (lcd_clock > 50000) /* Epson MAX */
-                printk("warning: LCD clock too high (%d KHz)\n", lcd_clock);
+                printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
+                                    lcd_clock);
 }
 
 unsigned int get_au1x00_lcd_clock(void)
 {
         return lcd_clock;
 }
-
 EXPORT_SYMBOL(get_au1x00_lcd_clock);
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index 8c93a05d7382..ba6430bc2d03 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -14,7 +14,7 @@
 
 #include <asm/mach-au1x00/au1000.h>
 
-struct cpu_spec* cur_cpu_spec[NR_CPUS];
+struct cpu_spec *cur_cpu_spec[NR_CPUS];
 
 /* With some thought, we can probably use the mask to reduce the
  * size of the table.
@@ -39,8 +39,7 @@ struct cpu_spec cpu_specs[] = {
         { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
 };
 
-void
-set_cpuspec(void)
+void set_cpuspec(void)
 {
         struct  cpu_spec *sp;
         u32     prid;
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 53377dfc0640..601ee9180ee4 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -53,12 +53,11 @@
  */
 static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
 
-/* I couldn't find a macro that did this......
-*/
+/* I couldn't find a macro that did this... */
 #define ALIGN_ADDR(x, a)        ((((u32)(x)) + (a-1)) & ~(a-1))
 
 static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized=0;
+static int dbdma_initialized;
 static void au1xxx_dbdma_init(void);
 
 static dbdev_tab_t dbdev_tab[] = {
@@ -149,7 +148,7 @@ static dbdev_tab_t dbdev_tab[] = {
 
         { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
 
-#endif // CONFIG_SOC_AU1200
+#endif /* CONFIG_SOC_AU1200 */
 
         { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
         { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
@@ -177,8 +176,7 @@ static dbdev_tab_t dbdev_tab[] = {
 
 static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
 
-static dbdev_tab_t *
-find_dbdev_id(u32 id)
+static dbdev_tab_t *find_dbdev_id(u32 id)
 {
         int i;
         dbdev_tab_t *p;
@@ -190,29 +188,27 @@ find_dbdev_id(u32 id)
         return NULL;
 }
 
-void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
 {
-        return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+        return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 }
 EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
 
-u32
-au1xxx_ddma_add_device(dbdev_tab_t *dev)
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
 {
         u32 ret = 0;
-        dbdev_tab_t *p=NULL;
-        static u16 new_id=0x1000;
+        dbdev_tab_t *p;
+        static u16 new_id = 0x1000;
 
         p = find_dbdev_id(~0);
-        if ( NULL != p )
-        {
+        if (NULL != p) {
                 memcpy(p, dev, sizeof(dbdev_tab_t));
                 p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
                 ret = p->dev_id;
                 new_id++;
 #if 0
-                printk("add_device: id:%x flags:%x padd:%x\n",
-                                p->dev_id, p->dev_flags, p->dev_physaddr );
+                printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
+                                  p->dev_id, p->dev_flags, p->dev_physaddr);
 #endif
         }
 
@@ -220,10 +216,19 @@ au1xxx_ddma_add_device(dbdev_tab_t *dev)
 }
 EXPORT_SYMBOL(au1xxx_ddma_add_device);
 
-/* Allocate a channel and return a non-zero descriptor if successful.
-*/
-u32
-au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+void au1xxx_ddma_del_device(u32 devid)
+{
+        dbdev_tab_t *p = find_dbdev_id(devid);
+
+        if (p != NULL) {
+                memset(p, 0, sizeof(dbdev_tab_t));
+                p->dev_id = ~0;
+        }
+}
+EXPORT_SYMBOL(au1xxx_ddma_del_device);
+
+/* Allocate a channel and return a non-zero descriptor if successful. */
+u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
        void (*callback)(int, void *), void *callparam)
 {
         unsigned long   flags;
@@ -234,7 +239,8 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
         chan_tab_t      *ctp;
         au1x_dma_chan_t *cp;
 
-        /* We do the intialization on the first channel allocation.
+        /*
+         * We do the intialization on the first channel allocation.
          * We have to wait because of the interrupt handler initialization
          * which can't be done successfully during board set up.
          */
@@ -242,16 +248,17 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
                 au1xxx_dbdma_init();
         dbdma_initialized = 1;
 
-        if ((stp = find_dbdev_id(srcid)) == NULL)
+        stp = find_dbdev_id(srcid);
+        if (stp == NULL)
                 return 0;
-        if ((dtp = find_dbdev_id(destid)) == NULL)
+        dtp = find_dbdev_id(destid);
+        if (dtp == NULL)
                 return 0;
 
         used = 0;
         rv = 0;
 
-        /* Check to see if we can get both channels.
-        */
+        /* Check to see if we can get both channels. */
         spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
         if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
              (stp->dev_flags & DEV_FLAGS_ANYUSE)) {
@@ -261,35 +268,30 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
                      (dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
                         /* Got destination */
                         dtp->dev_flags |= DEV_FLAGS_INUSE;
-                }
-                else {
-                        /* Can't get dest.  Release src.
-                        */
+                } else {
+                        /* Can't get dest.  Release src. */
                         stp->dev_flags &= ~DEV_FLAGS_INUSE;
                         used++;
                 }
-        }
-        else {
+        } else
                 used++;
-        }
         spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
 
         if (!used) {
-                /* Let's see if we can allocate a channel for it.
-                */
+                /* Let's see if we can allocate a channel for it. */
                 ctp = NULL;
                 chan = 0;
                 spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
-                for (i=0; i<NUM_DBDMA_CHANS; i++) {
+                for (i = 0; i < NUM_DBDMA_CHANS; i++)
                         if (chan_tab_ptr[i] == NULL) {
-                                /* If kmalloc fails, it is caught below same
+                                /*
+                                 * If kmalloc fails, it is caught below same
                                  * as a channel not available.
                                  */
                                 ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
                                 chan_tab_ptr[i] = ctp;
                                 break;
                         }
-                }
                 spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
 
                 if (ctp != NULL) {
@@ -304,8 +306,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
                         ctp->chan_callback = callback;
                         ctp->chan_callparam = callparam;
 
-                        /* Initialize channel configuration.
-                        */
+                        /* Initialize channel configuration. */
                         i = 0;
                         if (stp->dev_intlevel)
                                 i |= DDMA_CFG_SED;
@@ -326,8 +327,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
                          * operations.
                          */
                         rv = (u32)(&chan_tab_ptr[chan]);
-                }
-                else {
+                } else {
                         /* Release devices */
                         stp->dev_flags &= ~DEV_FLAGS_INUSE;
                         dtp->dev_flags &= ~DEV_FLAGS_INUSE;
@@ -337,11 +337,11 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 }
 EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
 
-/* Set the device width if source or destination is a FIFO.
+/*
+ * Set the device width if source or destination is a FIFO.
  * Should be 8, 16, or 32 bits.
  */
-u32
-au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
 {
         u32             rv;
         chan_tab_t      *ctp;
@@ -365,10 +365,8 @@ au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
 }
 EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
 
-/* Allocate a descriptor ring, initializing as much as possible.
-*/
-u32
-au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
+/* Allocate a descriptor ring, initializing as much as possible. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 {
         int                     i;
         u32                     desc_base, srcid, destid;
@@ -378,43 +376,45 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
         dbdev_tab_t             *stp, *dtp;
         au1x_ddma_desc_t        *dp;
 
-        /* I guess we could check this to be within the
+        /*
+         * I guess we could check this to be within the
          * range of the table......
          */
         ctp = *((chan_tab_t **)chanid);
         stp = ctp->chan_src;
         dtp = ctp->chan_dest;
 
-        /* The descriptors must be 32-byte aligned.  There is a
+        /*
+         * The descriptors must be 32-byte aligned.  There is a
          * possibility the allocation will give us such an address,
          * and if we try that first we are likely to not waste larger
          * slabs of memory.
          */
         desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
-                        GFP_KERNEL|GFP_DMA);
+                                 GFP_KERNEL|GFP_DMA);
         if (desc_base == 0)
                 return 0;
 
         if (desc_base & 0x1f) {
-                /* Lost....do it again, allocate extra, and round
+                /*
+                 * Lost....do it again, allocate extra, and round
                  * the address base.
                  */
                 kfree((const void *)desc_base);
                 i = entries * sizeof(au1x_ddma_desc_t);
                 i += (sizeof(au1x_ddma_desc_t) - 1);
-                if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
+                desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
+                if (desc_base == 0)
                         return 0;
 
                 desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
         }
         dp = (au1x_ddma_desc_t *)desc_base;
 
-        /* Keep track of the base descriptor.
-        */
+        /* Keep track of the base descriptor. */
         ctp->chan_desc_base = dp;
 
-        /* Initialize the rings with as much information as we know.
-         */
+        /* Initialize the rings with as much information as we know. */
         srcid = stp->dev_id;
         destid = dtp->dev_id;
 
@@ -426,11 +426,12 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
         cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
         cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
 
-        /* is it mem to mem transfer? */
-        if(((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
-           ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) {
-               cmd0 |= DSCR_CMD0_MEM;
-        }
+        /* Is it mem to mem transfer? */
+        if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
+             (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+            ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
+             (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
+                cmd0 |= DSCR_CMD0_MEM;
 
         switch (stp->dev_devwidth) {
         case 8:
@@ -458,15 +459,17 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
                 break;
         }
 
-        /* If the device is marked as an in/out FIFO, ensure it is
+        /*
+         * If the device is marked as an in/out FIFO, ensure it is
          * set non-coherent.
          */
         if (stp->dev_flags & DEV_FLAGS_IN)
-                cmd0 |= DSCR_CMD0_SN;           /* Source in fifo */
+                cmd0 |= DSCR_CMD0_SN;           /* Source in FIFO */
         if (dtp->dev_flags & DEV_FLAGS_OUT)
-                cmd0 |= DSCR_CMD0_DN;           /* Destination out fifo */
+                cmd0 |= DSCR_CMD0_DN;           /* Destination out FIFO */
 
-        /* Set up source1.  For now, assume no stride and increment.
+        /*
+         * Set up source1.  For now, assume no stride and increment.
          * A channel attribute update can change this later.
          */
         switch (stp->dev_tsize) {
@@ -485,19 +488,19 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
                 break;
         }
 
-        /* If source input is fifo, set static address.
-        */
+        /* If source input is FIFO, set static address. */
         if (stp->dev_flags & DEV_FLAGS_IN) {
-                if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+                if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
                         src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
                 else
-                src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
-
+                        src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
         }
+
         if (stp->dev_physaddr)
                 src0 = stp->dev_physaddr;
 
-        /* Set up dest1.  For now, assume no stride and increment.
+        /*
+         * Set up dest1.  For now, assume no stride and increment.
          * A channel attribute update can change this later.
          */
         switch (dtp->dev_tsize) {
@@ -516,22 +519,24 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
                 break;
         }
 
-        /* If destination output is fifo, set static address.
-        */
+        /* If destination output is FIFO, set static address. */
         if (dtp->dev_flags & DEV_FLAGS_OUT) {
-                if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
-                        dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
-                                else
-                dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
+                if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
+                        dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+                else
+                        dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
         }
+
         if (dtp->dev_physaddr)
                 dest0 = dtp->dev_physaddr;
 
 #if 0
-                printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
-                        dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+                printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
+                                  "source1:%x dest0:%x dest1:%x\n",
+                                  dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
+                                  src1, dest0, dest1);
 #endif
-        for (i=0; i<entries; i++) {
+        for (i = 0; i < entries; i++) {
                 dp->dscr_cmd0 = cmd0;
                 dp->dscr_cmd1 = cmd1;
                 dp->dscr_source0 = src0;
@@ -545,49 +550,49 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
                 dp++;
         }
 
-        /* Make last descrptor point to the first.
-        */
+        /* Make last descrptor point to the first. */
         dp--;
         dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
         ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
 
-        return (u32)(ctp->chan_desc_base);
+        return (u32)ctp->chan_desc_base;
 }
 EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
 
-/* Put a source buffer into the DMA ring.
+/*
+ * Put a source buffer into the DMA ring.
  * This updates the source pointer and byte count.  Normally used
  * for memory to fifo transfers.
  */
-u32
-_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
 {
         chan_tab_t              *ctp;
         au1x_ddma_desc_t        *dp;
 
-        /* I guess we could check this to be within the
+        /*
+         * I guess we could check this to be within the
          * range of the table......
          */
-        ctp = *((chan_tab_t **)chanid);
+        ctp = *(chan_tab_t **)chanid;
 
-        /* We should have multiple callers for a particular channel,
+        /*
+         * We should have multiple callers for a particular channel,
          * an interrupt doesn't affect this pointer nor the descriptor,
          * so no locking should be needed.
          */
         dp = ctp->put_ptr;
 
-        /* If the descriptor is valid, we are way ahead of the DMA
+        /*
+         * If the descriptor is valid, we are way ahead of the DMA
          * engine, so just return an error condition.
          */
-        if (dp->dscr_cmd0 & DSCR_CMD0_V) {
+        if (dp->dscr_cmd0 & DSCR_CMD0_V)
                 return 0;
-        }
 
-        /* Load up buffer address and byte count.
-        */
+        /* Load up buffer address and byte count. */
         dp->dscr_source0 = virt_to_phys(buf);
         dp->dscr_cmd1 = nbytes;
-        /* Check flags  */
+        /* Check flags */
         if (flags & DDMA_FLAGS_IE)
                 dp->dscr_cmd0 |= DSCR_CMD0_IE;
         if (flags & DDMA_FLAGS_NOIE)
@@ -595,23 +600,21 @@ _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
 
         /*
          * There is an errata on the Au1200/Au1550 parts that could result
-         * in "stale" data being DMA'd. It has to do with the snoop logic on
-         * the dache eviction buffer.  NONCOHERENT_IO is on by default for
-         * these parts. If it is fixedin the future, these dma_cache_inv will
+         * in "stale" data being DMA'ed. It has to do with the snoop logic on
+         * the cache eviction buffer.  DMA_NONCOHERENT is on by default for
+         * these parts. If it is fixed in the future, these dma_cache_inv will
          * just be nothing more than empty macros. See io.h.
-         * */
+         */
         dma_cache_wback_inv((unsigned long)buf, nbytes);
-        dp->dscr_cmd0 |= DSCR_CMD0_V;        /* Let it rip */
+        dp->dscr_cmd0 |= DSCR_CMD0_V;   /* Let it rip */
         au_sync();
         dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
-        ctp->chan_ptr->ddma_dbell = 0;
+        ctp->chan_ptr->ddma_dbell = 0;
 
-        /* Get next descriptor pointer.
-        */
+        /* Get next descriptor pointer. */
         ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
-        /* return something not zero.
-        */
+        /* Return something non-zero. */
         return nbytes;
 }
 EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
@@ -654,81 +657,77 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
         dp->dscr_dest0 = virt_to_phys(buf);
         dp->dscr_cmd1 = nbytes;
 #if 0
-        printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
-                        dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
-                        dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+        printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+                          dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+                          dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
 #endif
         /*
          * There is an errata on the Au1200/Au1550 parts that could result in
-         * "stale" data being DMA'd. It has to do with the snoop logic on the
-         * dache eviction buffer. NONCOHERENT_IO is on by default for these
-         * parts. If it is fixedin the future, these dma_cache_inv will just
+         * "stale" data being DMA'ed. It has to do with the snoop logic on the
+         * cache eviction buffer.  DMA_NONCOHERENT is on by default for these
+         * parts. If it is fixed in the future, these dma_cache_inv will just
          * be nothing more than empty macros. See io.h.
-         * */
+         */
         dma_cache_inv((unsigned long)buf, nbytes);
         dp->dscr_cmd0 |= DSCR_CMD0_V;   /* Let it rip */
         au_sync();
         dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
-        ctp->chan_ptr->ddma_dbell = 0;
+        ctp->chan_ptr->ddma_dbell = 0;
 
-        /* Get next descriptor pointer.
-        */
+        /* Get next descriptor pointer. */
         ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
-        /* return something not zero.
-        */
+        /* Return something non-zero. */
         return nbytes;
 }
 EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
 
-/* Get a destination buffer into the DMA ring.
+/*
+ * Get a destination buffer into the DMA ring.
  * Normally used to get a full buffer from the ring during fifo
  * to memory transfers.  This does not set the valid bit, you will
  * have to put another destination buffer to keep the DMA going.
  */
-u32
-au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
 {
         chan_tab_t              *ctp;
         au1x_ddma_desc_t        *dp;
         u32                     rv;
 
-        /* I guess we could check this to be within the
+        /*
+         * I guess we could check this to be within the
          * range of the table......
          */
         ctp = *((chan_tab_t **)chanid);
 
-        /* We should have multiple callers for a particular channel,
+        /*
+         * We should have multiple callers for a particular channel,
          * an interrupt doesn't affect this pointer nor the descriptor,
          * so no locking should be needed.
          */
         dp = ctp->get_ptr;
 
-        /* If the descriptor is valid, we are way ahead of the DMA
+        /*
+         * If the descriptor is valid, we are way ahead of the DMA
          * engine, so just return an error condition.
          */
         if (dp->dscr_cmd0 & DSCR_CMD0_V)
                 return 0;
 
-        /* Return buffer address and byte count.
-        */
+        /* Return buffer address and byte count. */
         *buf = (void *)(phys_to_virt(dp->dscr_dest0));
         *nbytes = dp->dscr_cmd1;
         rv = dp->dscr_stat;
 
-        /* Get next descriptor pointer.
-        */
+        /* Get next descriptor pointer. */
         ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
-        /* return something not zero.
-        */
+        /* Return something non-zero. */
         return rv;
 }
-
 EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
 
-void
-au1xxx_dbdma_stop(u32 chanid)
+void au1xxx_dbdma_stop(u32 chanid)
 {
         chan_tab_t      *ctp;
         au1x_dma_chan_t *cp;
@@ -743,7 +742,7 @@ au1xxx_dbdma_stop(u32 chanid)
                 udelay(1);
                 halt_timeout++;
                 if (halt_timeout > 100) {
-                        printk("warning: DMA channel won't halt\n");
+                        printk(KERN_WARNING "warning: DMA channel won't halt\n");
                         break;
                 }
         }
@@ -753,12 +752,12 @@ au1xxx_dbdma_stop(u32 chanid)
 }
 EXPORT_SYMBOL(au1xxx_dbdma_stop);
 
-/* Start using the current descriptor pointer.  If the dbdma encounters
- * a not valid descriptor, it will stop.  In this case, we can just
+/*
+ * Start using the current descriptor pointer.  If the DBDMA encounters
+ * a non-valid descriptor, it will stop.  In this case, we can just
  * continue by adding a buffer to the list and starting again.
  */
-void
-au1xxx_dbdma_start(u32 chanid)
+void au1xxx_dbdma_start(u32 chanid)
 {
         chan_tab_t      *ctp;
         au1x_dma_chan_t *cp;
@@ -773,8 +772,7 @@ au1xxx_dbdma_start(u32 chanid)
 }
 EXPORT_SYMBOL(au1xxx_dbdma_start);
 
-void
-au1xxx_dbdma_reset(u32 chanid)
+void au1xxx_dbdma_reset(u32 chanid)
 {
         chan_tab_t              *ctp;
         au1x_ddma_desc_t        *dp;
@@ -784,14 +782,14 @@ au1xxx_dbdma_reset(u32 chanid)
         ctp = *((chan_tab_t **)chanid);
         ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
 
-        /* Run through the descriptors and reset the valid indicator.
-        */
+        /* Run through the descriptors and reset the valid indicator. */
         dp = ctp->chan_desc_base;
 
         do {
                 dp->dscr_cmd0 &= ~DSCR_CMD0_V;
-                /* reset our SW status -- this is used to determine
-                 * if a descriptor is in use by upper level SW. Since
+                /*
+                 * Reset our software status -- this is used to determine
+                 * if a descriptor is in use by upper level software. Since
                  * posting can reset 'V' bit.
                  */
                 dp->sw_status = 0;
@@ -800,8 +798,7 @@ au1xxx_dbdma_reset(u32 chanid)
 }
 EXPORT_SYMBOL(au1xxx_dbdma_reset);
 
-u32
-au1xxx_get_dma_residue(u32 chanid)
+u32 au1xxx_get_dma_residue(u32 chanid)
 {
         chan_tab_t      *ctp;
         au1x_dma_chan_t *cp;
@@ -810,18 +807,15 @@ au1xxx_get_dma_residue(u32 chanid)
         ctp = *((chan_tab_t **)chanid);
         cp = ctp->chan_ptr;
 
-        /* This is only valid if the channel is stopped.
-        */
+        /* This is only valid if the channel is stopped. */
         rv = cp->ddma_bytecnt;
         au_sync();
 
         return rv;
 }
-
 EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
 
-void
-au1xxx_dbdma_chan_free(u32 chanid)
+void au1xxx_dbdma_chan_free(u32 chanid)
 {
         chan_tab_t      *ctp;
         dbdev_tab_t     *stp, *dtp;
@@ -842,8 +836,7 @@ au1xxx_dbdma_chan_free(u32 chanid)
 }
 EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
 
-static irqreturn_t
-dbdma_interrupt(int irq, void *dev_id)
+static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
 {
         u32 intstat;
         u32 chan_index;
@@ -859,13 +852,12 @@ dbdma_interrupt(int irq, void *dev_id)
         cp = ctp->chan_ptr;
         dp = ctp->cur_ptr;
 
-        /* Reset interrupt.
-        */
+        /* Reset interrupt. */
         cp->ddma_irq = 0;
         au_sync();
 
         if (ctp->chan_callback)
-                (ctp->chan_callback)(irq, ctp->chan_callparam);
+                ctp->chan_callback(irq, ctp->chan_callparam);
 
         ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
         return IRQ_RETVAL(1);
@@ -890,47 +882,47 @@ static void au1xxx_dbdma_init(void)
 
         if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
                         "Au1xxx dbdma", (void *)dbdma_gptr))
-                printk("Can't get 1550 dbdma irq");
+                printk(KERN_ERR "Can't get 1550 dbdma irq");
 }
 
-void
-au1xxx_dbdma_dump(u32 chanid)
+void au1xxx_dbdma_dump(u32 chanid)
 {
-        chan_tab_t              *ctp;
-        au1x_ddma_desc_t        *dp;
-        dbdev_tab_t             *stp, *dtp;
-        au1x_dma_chan_t *cp;
-                u32                     i = 0;
+        chan_tab_t       *ctp;
+        au1x_ddma_desc_t *dp;
+        dbdev_tab_t      *stp, *dtp;
+        au1x_dma_chan_t  *cp;
+        u32 i            = 0;
 
         ctp = *((chan_tab_t **)chanid);
         stp = ctp->chan_src;
         dtp = ctp->chan_dest;
         cp = ctp->chan_ptr;
 
-        printk("Chan %x, stp %x (dev %d)  dtp %x (dev %d) \n",
-                (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, dtp - dbdev_tab);
-        printk("desc base %x, get %x, put %x, cur %x\n",
-                (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
-                (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
-
-        printk("dbdma chan %x\n", (u32)cp);
-        printk("cfg %08x, desptr %08x, statptr %08x\n",
-                cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
-        printk("dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
-                cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, cp->ddma_bytecnt);
-
-
-        /* Run through the descriptors
-        */
+        printk(KERN_DEBUG "Chan %x, stp %x (dev %d)  dtp %x (dev %d) \n",
+                          (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
+                          dtp - dbdev_tab);
+        printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
+                          (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
+                          (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
+
+        printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
+        printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
+                          cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
+        printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
+                          cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
+                          cp->ddma_bytecnt);
+
+        /* Run through the descriptors */
         dp = ctp->chan_desc_base;
 
         do {
-                printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
-                        i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
-                printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
-                        dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
-                printk("stat %08x, nxtptr %08x\n",
-                        dp->dscr_stat, dp->dscr_nxtptr);
+                printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+                                  i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+                printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+                                  dp->dscr_source0, dp->dscr_source1,
+                                  dp->dscr_dest0, dp->dscr_dest1);
+                printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
+                                  dp->dscr_stat, dp->dscr_nxtptr);
                 dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
         } while (dp != ctp->chan_desc_base);
 }
@@ -938,32 +930,33 @@ au1xxx_dbdma_dump(u32 chanid)
 /* Put a descriptor into the DMA ring.
  * This updates the source/destination pointers and byte count.
  */
-u32
-au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 {
         chan_tab_t *ctp;
         au1x_ddma_desc_t *dp;
-        u32 nbytes=0;
+        u32 nbytes = 0;
 
-        /* I guess we could check this to be within the
-        * range of the table......
-        */
+        /*
+         * I guess we could check this to be within the
+         * range of the table......
+         */
         ctp = *((chan_tab_t **)chanid);
 
-        /* We should have multiple callers for a particular channel,
-        * an interrupt doesn't affect this pointer nor the descriptor,
-        * so no locking should be needed.
-        */
+        /*
+         * We should have multiple callers for a particular channel,
+         * an interrupt doesn't affect this pointer nor the descriptor,
+         * so no locking should be needed.
+         */
         dp = ctp->put_ptr;
 
-        /* If the descriptor is valid, we are way ahead of the DMA
-        * engine, so just return an error condition.
-        */
+        /*
+         * If the descriptor is valid, we are way ahead of the DMA
+         * engine, so just return an error condition.
+         */
         if (dp->dscr_cmd0 & DSCR_CMD0_V)
                 return 0;
 
-        /* Load up buffer addresses and byte count.
-        */
+        /* Load up buffer addresses and byte count. */
         dp->dscr_dest0 = dscr->dscr_dest0;
         dp->dscr_source0 = dscr->dscr_source0;
         dp->dscr_dest1 = dscr->dscr_dest1;
@@ -975,14 +968,11 @@ au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
         dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
         ctp->chan_ptr->ddma_dbell = 0;
 
-        /* Get next descriptor pointer.
-        */
+        /* Get next descriptor pointer. */
         ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
-        /* return something not zero.
-        */
+        /* Return something non-zero. */
         return nbytes;
 }
 
 #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
-
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
index eae1bb2ca26e..af5be7df2f2a 100644
--- a/arch/mips/au1000/common/dbg_io.c
+++ b/arch/mips/au1000/common/dbg_io.c
@@ -1,3 +1,4 @@
+#include <linux/types.h>
 
 #include <asm/mach-au1x00/au1000.h>
 
@@ -8,12 +9,6 @@
  * uart to be used for debugging.
  */
 #define DEBUG_BASE  UART_DEBUG_BASE
-/**/
-
-/* we need uint32 uint8 */
-/* #include "types.h" */
-typedef         unsigned char uint8;
-typedef         unsigned int  uint32;
 
 #define         UART16550_BAUD_2400             2400
 #define         UART16550_BAUD_4800             4800
@@ -51,17 +46,15 @@ typedef         unsigned int  uint32;
 #define UART_MOD_CNTRL  0x100   /* Module Control */
 
 /* memory-mapped read/write of the port */
-#define UART16550_READ(y)    (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y))
+#define UART16550_READ(y)     (au_readl(DEBUG_BASE + y) & 0xff)
+#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
 
 extern unsigned long calc_clock(void);
 
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
 {
-
-        if (UART16550_READ(UART_MOD_CNTRL) != 0x3) {
+        if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
                 UART16550_WRITE(UART_MOD_CNTRL, 3);
-        }
         calc_clock();
 
         /* disable interrupts */
@@ -69,7 +62,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 
         /* set up baud rate */
         {
-                uint32 divisor;
+                u32 divisor;
 
                 /* set divisor */
                 divisor = get_au1x00_uart_baud_base() / baud;
@@ -80,9 +73,9 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
         UART16550_WRITE(UART_LCR, (data | parity | stop));
 }
 
-static int remoteDebugInitialized = 0;
+static int remoteDebugInitialized;
 
-uint8 getDebugChar(void)
+u8 getDebugChar(void)
 {
         if (!remoteDebugInitialized) {
                 remoteDebugInitialized = 1;
@@ -92,15 +85,13 @@ uint8 getDebugChar(void)
                           UART16550_STOP_1BIT);
         }
 
-        while((UART16550_READ(UART_LSR) & 0x1) == 0);
+        while ((UART16550_READ(UART_LSR) & 0x1) == 0);
         return UART16550_READ(UART_RX);
 }
 
 
-int putDebugChar(uint8 byte)
+int putDebugChar(u8 byte)
 {
-//      int i;
-
         if (!remoteDebugInitialized) {
                 remoteDebugInitialized = 1;
                 debugInit(UART16550_BAUD_115200,
@@ -109,9 +100,8 @@ int putDebugChar(uint8 byte)
                           UART16550_STOP_1BIT);
         }
 
-        while ((UART16550_READ(UART_LSR)&0x40) == 0);
+        while ((UART16550_READ(UART_LSR) & 0x40) == 0);
         UART16550_WRITE(UART_TX, byte);
-        //for (i=0;i<0xfff;i++);
 
         return 1;
 }
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c
index 95f69ea146e9..d6fbda232e6a 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/au1000/common/dma.c
@@ -1,12 +1,11 @@
 /*
  *
  * BRIEF MODULE DESCRIPTION
- *      A DMA channel allocator for Au1000. API is modeled loosely off of
+ *      A DMA channel allocator for Au1x00. API is modeled loosely off of
  *      linux/kernel/dma.c.
  *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              stevel@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -39,7 +38,8 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
 
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+    defined(CONFIG_SOC_AU1100)
 /*
  * A note on resource allocation:
  *
@@ -56,7 +56,6 @@
  * returned from request_dma.
  */
 
-
 DEFINE_SPINLOCK(au1000_dma_spin_lock);
 
 struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
@@ -71,7 +70,7 @@ struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
 };
 EXPORT_SYMBOL(au1000_dma_table);
 
-// Device FIFO addresses and default DMA modes
+/* Device FIFO addresses and default DMA modes */
 static const struct dma_dev {
         unsigned int fifo_addr;
         unsigned int dma_mode;
@@ -80,8 +79,8 @@ static const struct dma_dev {
         {UART0_ADDR + UART_RX, 0},
         {0, 0},
         {0, 0},
-        {AC97C_DATA, DMA_DW16 },          // coherent
-        {AC97C_DATA, DMA_DR | DMA_DW16 }, // coherent
+        {AC97C_DATA, DMA_DW16 },          /* coherent */
+        {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */
         {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
         {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
         {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
@@ -101,10 +100,10 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
         struct dma_chan *chan;
 
         for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
-                if ((chan = get_dma_chan(i)) != NULL) {
+                chan = get_dma_chan(i);
+                if (chan != NULL)
                         len += sprintf(buf + len, "%2d: %s\n",
                                        i, chan->dev_str);
-                }
         }
 
         if (fpos >= len) {
@@ -113,18 +112,19 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
                 return 0;
         }
         *start = buf + fpos;
-        if ((len -= fpos) > length)
+        len -= fpos;
+        if (len > length)
                 return length;
         *eof = 1;
         return len;
 }
 
-// Device FIFO addresses and default DMA modes - 2nd bank
+/* Device FIFO addresses and default DMA modes - 2nd bank */
 static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
-        {SD0_XMIT_FIFO, DMA_DS | DMA_DW8},              // coherent
-        {SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8},     // coherent
-        {SD1_XMIT_FIFO, DMA_DS | DMA_DW8},              // coherent
-        {SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8}      // coherent
+        { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 },            /* coherent */
+        { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 },   /* coherent */
+        { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 },            /* coherent */
+        { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }    /* coherent */
 };
 
 void dump_au1000_dma_channel(unsigned int dmanr)
@@ -150,7 +150,6 @@ void dump_au1000_dma_channel(unsigned int dmanr)
                au_readl(chan->io + DMA_BUFFER1_COUNT));
 }
 
-
 /*
  * Finds a free channel, and binds the requested device to it.
  * Returns the allocated channel number, or negative on error.
@@ -169,14 +168,14 @@ int request_au1000_dma(int dev_id, const char *dev_str,
         if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
                 return -EINVAL;
 #else
-        if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+        if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
                 return -EINVAL;
 #endif
 
-        for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
+        for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
                 if (au1000_dma_table[i].dev_id < 0)
                         break;
-        }
+
         if (i == NUM_AU1000_DMA_CHANNELS)
                 return -ENODEV;
 
@@ -185,15 +184,15 @@ int request_au1000_dma(int dev_id, const char *dev_str,
         if (dev_id >= DMA_NUM_DEV) {
                 dev_id -= DMA_NUM_DEV;
                 dev = &dma_dev_table_bank2[dev_id];
-        } else {
+        } else
                 dev = &dma_dev_table[dev_id];
-        }
 
         if (irqhandler) {
                 chan->irq = AU1000_DMA_INT_BASE + i;
                 chan->irq_dev = irq_dev_id;
-                if ((ret = request_irq(chan->irq, irqhandler, irqflags,
-                                       dev_str, chan->irq_dev))) {
+                ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
+                                  chan->irq_dev);
+                if (ret) {
                         chan->irq = 0;
                         chan->irq_dev = NULL;
                         return ret;
@@ -203,7 +202,7 @@ int request_au1000_dma(int dev_id, const char *dev_str,
                 chan->irq_dev = NULL;
         }
 
-        // fill it in
+        /* fill it in */
         chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
         chan->dev_id = dev_id;
         chan->dev_str = dev_str;
@@ -220,8 +219,9 @@ EXPORT_SYMBOL(request_au1000_dma);
 void free_au1000_dma(unsigned int dmanr)
 {
         struct dma_chan *chan = get_dma_chan(dmanr);
+
         if (!chan) {
-                printk("Trying to free DMA%d\n", dmanr);
+                printk(KERN_ERR "Error trying to free DMA%d\n", dmanr);
                 return;
         }
 
@@ -235,4 +235,4 @@ void free_au1000_dma(unsigned int dmanr)
 }
 EXPORT_SYMBOL(free_au1000_dma);
 
-#endif // AU1000 AU1500 AU1100
+#endif /* AU1000 AU1500 AU1100 */
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
index 525452589971..b485d94ce8a5 100644
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/au1000/common/gpio.c
@@ -69,7 +69,7 @@ static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
 
 static int au1xxx_gpio1_read(unsigned gpio)
 {
-        return ((gpio1->pinstaterd >> gpio) & 0x01);
+        return (gpio1->pinstaterd >> gpio) & 0x01;
 }
 
 static void au1xxx_gpio1_write(unsigned gpio, int value)
@@ -104,7 +104,6 @@ int au1xxx_gpio_get_value(unsigned gpio)
         else
                 return au1xxx_gpio1_read(gpio);
 }
-
 EXPORT_SYMBOL(au1xxx_gpio_get_value);
 
 void au1xxx_gpio_set_value(unsigned gpio, int value)
@@ -118,7 +117,6 @@ void au1xxx_gpio_set_value(unsigned gpio, int value)
         else
                 au1xxx_gpio1_write(gpio, value);
 }
-
 EXPORT_SYMBOL(au1xxx_gpio_set_value);
 
 int au1xxx_gpio_direction_input(unsigned gpio)
@@ -132,7 +130,6 @@ int au1xxx_gpio_direction_input(unsigned gpio)
 
         return au1xxx_gpio1_direction_input(gpio);
 }
-
 EXPORT_SYMBOL(au1xxx_gpio_direction_input);
 
 int au1xxx_gpio_direction_output(unsigned gpio, int value)
@@ -146,5 +143,4 @@ int au1xxx_gpio_direction_output(unsigned gpio, int value)
 
         return au1xxx_gpio1_direction_output(gpio, value);
 }
-
 EXPORT_SYMBOL(au1xxx_gpio_direction_output);
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index f0626992fd75..40c6ceceb5f9 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -210,10 +210,8 @@ static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr)
         au_sync();
 }
 
-
 static inline void mask_and_ack_level_irq(unsigned int irq_nr)
 {
-
         local_disable_irq(irq_nr);
         au_sync();
 #if defined(CONFIG_MIPS_PB1000)
@@ -263,14 +261,14 @@ void restore_local_and_enable(int controller, unsigned long mask)
         unsigned long flags, new_mask;
 
         spin_lock_irqsave(&irq_lock, flags);
-        for (i = 0; i < 32; i++) {
+        for (i = 0; i < 32; i++)
                 if (mask & (1 << i)) {
                         if (controller)
                                 local_enable_irq(i + 32);
                         else
                                 local_enable_irq(i);
                 }
-        }
+
         if (controller)
                 new_mask = au_readl(IC1_MASKSET);
         else
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c
index 7e966b31e3e1..7866cf50cf99 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/au1000/common/pci.c
@@ -2,9 +2,8 @@
  * BRIEF MODULE DESCRIPTION
  *      Alchemy/AMD Au1x00 PCI support.
  *
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
@@ -86,9 +85,9 @@ static int __init au1x_pci_setup(void)
                 u32 prid = read_c0_prid();
 
                 if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
-                       au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
-                                 Au1500_PCI_CFG);
-                       printk("Non-coherent PCI accesses enabled\n");
+                        au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
+                                  Au1500_PCI_CFG);
+                        printk(KERN_INFO "Non-coherent PCI accesses enabled\n");
                 }
         }
 #endif
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 31d2a2270878..74d6d4a593be 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -165,12 +165,12 @@ static struct resource au1xxx_usb_gdt_resources[] = {
 static struct resource au1xxx_mmc_resources[] = {
         [0] = {
                 .start          = SD0_PHYS_ADDR,
-                .end            = SD0_PHYS_ADDR + 0x40,
+                .end            = SD0_PHYS_ADDR + 0x7ffff,
                 .flags          = IORESOURCE_MEM,
         },
         [1] = {
                 .start          = SD1_PHYS_ADDR,
-                .end            = SD1_PHYS_ADDR + 0x40,
+                .end            = SD1_PHYS_ADDR + 0x7ffff,
                 .flags          = IORESOURCE_MEM,
         },
         [2] = {
@@ -269,8 +269,8 @@ static struct platform_device au1x00_pcmcia_device = {
 #ifdef SMBUS_PSC_BASE
 static struct resource pbdb_smbus_resources[] = {
         {
-                .start  = SMBUS_PSC_BASE,
-                .end    = SMBUS_PSC_BASE + 0x24 - 1,
+                .start  = CPHYSADDR(SMBUS_PSC_BASE),
+                .end    = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
                 .flags  = IORESOURCE_MEM,
         },
 };
@@ -302,16 +302,17 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 #endif
 };
 
-int __init au1xxx_platform_init(void)
+static int __init au1xxx_platform_init(void)
 {
         unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
         int i;
 
         /* Fill up uartclk. */
-        for (i = 0; au1x00_uart_data[i].flags ; i++)
+        for (i = 0; au1x00_uart_data[i].flags; i++)
                 au1x00_uart_data[i].uartclk = uartclk;
 
-        return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
+        return platform_add_devices(au1xxx_platform_devices,
+                                    ARRAY_SIZE(au1xxx_platform_devices));
 }
 
 arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index a8cd2c1b9e1b..2166b9e1e80c 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -1,10 +1,9 @@
 /*
  * BRIEF MODULE DESCRIPTION
- *      Au1000 Power Management routines.
+ *      Au1xx0 Power Management routines.
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  Some of the routines are right out of init/main.c, whose
  *  copyrights apply here.
@@ -43,10 +42,10 @@
 #ifdef CONFIG_PM
 
 #define DEBUG 1
-#ifdef DEBUG
-#  define DPRINTK(fmt, args...) printk("%s: " fmt, __func__, ## args)
+#ifdef  DEBUG
+#define DPRINTK(fmt, args...)   printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
 #else
-#  define DPRINTK(fmt, args...)
+#define DPRINTK(fmt, args...)
 #endif
 
 static void au1000_calibrate_delay(void);
@@ -57,7 +56,8 @@ extern void local_enable_irq(unsigned int irq_nr);
 
 static DEFINE_SPINLOCK(pm_lock);
 
-/* We need to save/restore a bunch of core registers that are
+/*
+ * We need to save/restore a bunch of core registers that are
  * either volatile or reset to some state across a processor sleep.
  * If reading a register doesn't provide a proper result for a
  * later restore, we have to provide a function for loading that
@@ -78,24 +78,25 @@ static unsigned int	sleep_usbhost_enable;
 static unsigned int     sleep_usbdev_enable;
 static unsigned int     sleep_static_memctlr[4][3];
 
-/* Define this to cause the value you write to /proc/sys/pm/sleep to
+/*
+ * Define this to cause the value you write to /proc/sys/pm/sleep to
  * set the TOY timer for the amount of time you want to sleep.
  * This is done mainly for testing, but may be useful in other cases.
  * The value is number of 32KHz ticks to sleep.
  */
 #define SLEEP_TEST_TIMEOUT 1
-#ifdef SLEEP_TEST_TIMEOUT
-static  int     sleep_ticks;
+#ifdef  SLEEP_TEST_TIMEOUT
+static int sleep_ticks;
 void wakeup_counter0_set(int ticks);
 #endif
 
-static void
-save_core_regs(void)
+static void save_core_regs(void)
 {
         extern void save_au1xxx_intctl(void);
         extern void pm_eth0_shutdown(void);
 
-        /* Do the serial ports.....these really should be a pm_*
+        /*
+         * Do the serial ports.....these really should be a pm_*
          * registered function by the driver......but of course the
          * standard serial driver doesn't understand our Au1xxx
          * unique registers.
@@ -106,27 +107,24 @@ save_core_regs(void)
         sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
         sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
 
-        /* Shutdown USB host/device.
-        */
+        /* Shutdown USB host/device. */
         sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
 
-        /* There appears to be some undocumented reset register....
-        */
+        /* There appears to be some undocumented reset register.... */
         au_writel(0, 0xb0100004); au_sync();
         au_writel(0, USB_HOST_CONFIG); au_sync();
 
         sleep_usbdev_enable = au_readl(USBD_ENABLE);
         au_writel(0, USBD_ENABLE); au_sync();
 
-        /* Save interrupt controller state.
-        */
+        /* Save interrupt controller state. */
         save_au1xxx_intctl();
 
-        /* Clocks and PLLs.
-        */
+        /* Clocks and PLLs. */
         sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
 
-        /* We don't really need to do this one, but unless we
+        /*
+         * We don't really need to do this one, but unless we
          * write it again it won't have a valid value if we
          * happen to read it.
          */
@@ -134,8 +132,7 @@ save_core_regs(void)
 
         sleep_pin_function = au_readl(SYS_PINFUNC);
 
-        /* Save the static memory controller configuration.
-        */
+        /* Save the static memory controller configuration. */
         sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
         sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0);
         sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0);
@@ -150,8 +147,7 @@ save_core_regs(void)
         sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
 }
 
-static void
-restore_core_regs(void)
+static void restore_core_regs(void)
 {
         extern void restore_au1xxx_intctl(void);
         extern void wakeup_counter0_adjust(void);
@@ -160,8 +156,7 @@ restore_core_regs(void)
         au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
         au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
 
-        /* Restore the static memory controller configuration.
-        */
+        /* Restore the static memory controller configuration. */
         au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
         au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
         au_writel(sleep_static_memctlr[0][2], MEM_STADDR0);
@@ -175,7 +170,8 @@ restore_core_regs(void)
         au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
         au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
 
-        /* Enable the UART if it was enabled before sleep.
+        /*
+         * Enable the UART if it was enabled before sleep.
          * I guess I should define module control bits........
          */
         if (sleep_uart0_enable & 0x02) {
@@ -202,7 +198,7 @@ void wakeup_from_suspend(void)
 int au_sleep(void)
 {
         unsigned long wakeup, flags;
-        extern  void    save_and_sleep(void);
+        extern void save_and_sleep(void);
 
         spin_lock_irqsave(&pm_lock, flags);
 
@@ -210,23 +206,22 @@ int au_sleep(void)
 
         flush_cache_all();
 
-        /** The code below is all system dependent and we should probably
+        /**
+         ** The code below is all system dependent and we should probably
          ** have a function call out of here to set this up.  You need
          ** to configure the GPIO or timer interrupts that will bring
          ** you out of sleep.
          ** For testing, the TOY counter wakeup is useful.
          **/
-
 #if 0
         au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
 
-        /* gpio 6 can cause a wake up event */
+        /* GPIO 6 can cause a wake up event */
         wakeup = au_readl(SYS_WAKEMSK);
         wakeup &= ~(1 << 8);    /* turn off match20 wakeup */
-        wakeup |= 1 << 6;       /* turn on gpio 6 wakeup   */
+        wakeup |= 1 << 6;       /* turn on  GPIO  6 wakeup */
 #else
-        /* For testing, allow match20 to wake us up.
-        */
+        /* For testing, allow match20 to wake us up. */
 #ifdef SLEEP_TEST_TIMEOUT
         wakeup_counter0_set(sleep_ticks);
 #endif
@@ -240,7 +235,8 @@ int au_sleep(void)
 
         save_and_sleep();
 
-        /* after a wakeup, the cpu vectors back to 0x1fc00000 so
+        /*
+         * After a wakeup, the cpu vectors back to 0x1fc00000, so
          * it's up to the boot code to get us back here.
          */
         restore_core_regs();
@@ -248,24 +244,22 @@ int au_sleep(void)
         return 0;
 }
 
-static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
-                       void __user *buffer, size_t * len, loff_t *ppos)
+static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
+                       void __user *buffer, size_t *len, loff_t *ppos)
 {
 #ifdef SLEEP_TEST_TIMEOUT
 #define TMPBUFLEN2 16
         char buf[TMPBUFLEN2], *p;
 #endif
 
-        if (!write) {
+        if (!write)
                 *len = 0;
-        } else {
+        else {
 #ifdef SLEEP_TEST_TIMEOUT
-                if (*len > TMPBUFLEN2 - 1) {
+                if (*len > TMPBUFLEN2 - 1)
                         return -EFAULT;
-                }
-                if (copy_from_user(buf, buffer, *len)) {
+                if (copy_from_user(buf, buffer, *len))
                         return -EFAULT;
-                }
                 buf[*len] = 0;
                 p = buf;
                 sleep_ticks = simple_strtoul(p, &p, 0);
@@ -276,8 +270,8 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
         return 0;
 }
 
-static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
-                      void __user *buffer, size_t * len, loff_t *ppos)
+static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
+                      void __user *buffer, size_t *len, loff_t *ppos)
 {
         int retval = 0, i;
         unsigned long val, pll;
@@ -285,14 +279,14 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
 #define MAX_CPU_FREQ 396
         char buf[TMPBUFLEN], *p;
         unsigned long flags, intc0_mask, intc1_mask;
-        unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
-            old_refresh;
+        unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh;
         unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
+        unsigned long baud_rate;
 
         spin_lock_irqsave(&pm_lock, flags);
-        if (!write) {
+        if (!write)
                 *len = 0;
-        } else {
+        else {
                 /* Parse the new frequency */
                 if (*len > TMPBUFLEN - 1) {
                         spin_unlock_irqrestore(&pm_lock, flags);
@@ -312,7 +306,7 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
 
                 pll = val / 12;
                 if ((pll > 33) || (pll < 7)) {  /* 396 MHz max, 84 MHz min */
-                        /* revisit this for higher speed cpus */
+                        /* Revisit this for higher speed CPUs */
                         spin_unlock_irqrestore(&pm_lock, flags);
                         return -EFAULT;
                 }
@@ -321,30 +315,28 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
                 old_cpu_freq = get_au1x00_speed();
 
                 new_cpu_freq = pll * 12 * 1000000;
-                new_baud_base =  (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+                new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)
+                                                            & 0x03) + 2) * 16));
                 set_au1x00_speed(new_cpu_freq);
                 set_au1x00_uart_baud_base(new_baud_base);
 
                 old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
-                new_refresh =
-                    ((old_refresh * new_cpu_freq) /
-                     old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
+                new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) |
+                              (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
 
                 au_writel(pll, SYS_CPUPLL);
                 au_sync_delay(1);
                 au_writel(new_refresh, MEM_SDREFCFG);
                 au_sync_delay(1);
 
-                for (i = 0; i < 4; i++) {
-                        if (au_readl
-                            (UART_BASE + UART_MOD_CNTRL +
-                             i * 0x00100000) == 3) {
-                                old_clk =
-                                    au_readl(UART_BASE + UART_CLK +
-                                          i * 0x00100000);
-                                // baud_rate = baud_base/clk
+                for (i = 0; i < 4; i++)
+                        if (au_readl(UART_BASE + UART_MOD_CNTRL +
+                                     i * 0x00100000) == 3) {
+                                old_clk = au_readl(UART_BASE + UART_CLK +
+                                                   i * 0x00100000);
                                 baud_rate = old_baud_base / old_clk;
-                                /* we won't get an exact baud rate and the error
+                                /*
+                                 * We won't get an exact baud rate and the error
                                  * could be significant enough that our new
                                  * calculation will result in a clock that will
                                  * give us a baud rate that's too far off from
@@ -359,18 +351,14 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
                                 else if (baud_rate > 17000)
                                         baud_rate = 19200;
                                 else
-                                        (baud_rate = 9600);
-                                // new_clk = new_baud_base/baud_rate
+                                        baud_rate = 9600;
                                 new_clk = new_baud_base / baud_rate;
-                                au_writel(new_clk,
-                                       UART_BASE + UART_CLK +
-                                       i * 0x00100000);
+                                au_writel(new_clk, UART_BASE + UART_CLK +
+                                          i * 0x00100000);
                                 au_sync_delay(10);
                         }
-                }
         }
 
-
         /*
          * We don't want _any_ interrupts other than match20. Otherwise our
          * au1000_calibrate_delay() calculation will be off, potentially a lot.
@@ -428,14 +416,15 @@ static int __init pm_init(void)
 
 __initcall(pm_init);
 
-
 /*
  * This is right out of init/main.c
  */
 
-/* This is the number of bits of precision for the loops_per_jiffy.  Each
-   bit takes on average 1.5/HZ seconds.  This (like the original) is a little
-   better than 1% */
+/*
+ * This is the number of bits of precision for the loops_per_jiffy.
+ * Each bit takes on average 1.5/HZ seconds.  This (like the original)
+ * is a little better than 1%.
+ */
 #define LPS_PREC 8
 
 static void au1000_calibrate_delay(void)
@@ -443,14 +432,14 @@ static void au1000_calibrate_delay(void)
         unsigned long ticks, loopbit;
         int lps_precision = LPS_PREC;
 
-        loops_per_jiffy = (1 << 12);
+        loops_per_jiffy = 1 << 12;
 
         while (loops_per_jiffy <<= 1) {
-                /* wait for "start of" clock tick */
+                /* Wait for "start of" clock tick */
                 ticks = jiffies;
                 while (ticks == jiffies)
                         /* nothing */ ;
-                /* Go .. */
+                /* Go ... */
                 ticks = jiffies;
                 __delay(loops_per_jiffy);
                 ticks = jiffies - ticks;
@@ -458,8 +447,10 @@ static void au1000_calibrate_delay(void)
                         break;
         }
 
-/* Do a binary approximation to get loops_per_jiffy set to equal one clock
-   (up to lps_precision bits) */
+        /*
+         * Do a binary approximation to get loops_per_jiffy set to be equal
+         * one clock (up to lps_precision bits)
+         */
         loops_per_jiffy >>= 1;
         loopbit = loops_per_jiffy;
         while (lps_precision-- && (loopbit >>= 1)) {
@@ -472,4 +463,4 @@ static void au1000_calibrate_delay(void)
                         loops_per_jiffy &= ~loopbit;
         }
 }
-#endif                          /* CONFIG_PM */
+#endif  /* CONFIG_PM */
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c
index f10af829e4ec..18b310b475ca 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *    PROM library initialisation code, supports YAMON and U-Boot.
  *
- * Copyright 2000, 2001, 2006 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  * This file was derived from Carsten Langgaard's
  * arch/mips/mips-boards/xx files.
@@ -57,7 +56,7 @@ void prom_init_cmdline(void)
         actr = 1; /* Always ignore argv[0] */
 
         cp = &(arcs_cmdline[0]);
-        while(actr < prom_argc) {
+        while (actr < prom_argc) {
                 strcpy(cp, prom_argv[actr]);
                 cp += strlen(prom_argv[actr]);
                 *cp++ = ' ';
@@ -84,10 +83,8 @@ char *prom_getenv(char *envname)
                 if (yamon) {
                         if (strcmp(envname, *env++) == 0)
                                 return *env;
-                } else {
-                        if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
-                                return *env + i + 1;
-                }
+                } else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
+                        return *env + i + 1;
                 env++;
         }
 
@@ -110,13 +107,13 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
 {
         int i;
 
-        for(i = 0; i < 6; i++) {
+        for (i = 0; i < 6; i++) {
                 unsigned char num;
 
-                if((*str == '.') || (*str == ':'))
+                if ((*str == '.') || (*str == ':'))
                         str++;
-                num = str2hexnum(*str++) << 4;
-                num |= (str2hexnum(*str++));
+                num  = str2hexnum(*str++) << 4;
+                num |= str2hexnum(*str++);
                 ea[i] = num;
         }
 }
diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c
index e34c67e89293..55bbe24d45b6 100644
--- a/arch/mips/au1000/common/puts.c
+++ b/arch/mips/au1000/common/puts.c
@@ -1,11 +1,10 @@
 /*
  *
  * BRIEF MODULE DESCRIPTION
- *      Low level uart routines to directly access a 16550 uart.
+ *      Low level UART routines to directly access Alchemy UART.
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -40,12 +39,12 @@
 
 static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
 
-
 #ifdef SLOW_DOWN
 static inline void slow_down(void)
 {
-    int k;
-    for (k=0; k<10000; k++);
+        int k;
+
+        for (k = 0; k < 10000; k++);
 }
 #else
 #define slow_down()
@@ -54,16 +53,16 @@ static inline void slow_down(void)
 void
 prom_putchar(const unsigned char c)
 {
-    unsigned char ch;
-    int i = 0;
+        unsigned char ch;
+        int i = 0;
+
+        do {
+                ch = com1[SER_CMD];
+                slow_down();
+                i++;
+                if (i > TIMEOUT)
+                        break;
+        } while (0 == (ch & TX_BUSY));
 
-    do {
-        ch = com1[SER_CMD];
-        slow_down();
-        i++;
-        if (i>TIMEOUT) {
-            break;
-        }
-    } while (0 == (ch & TX_BUSY));
-    com1[SER_DATA] = c;
+        com1[SER_DATA] = c;
 }
diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c
index 60cec537c745..d555429c8d6f 100644
--- a/arch/mips/au1000/common/reset.c
+++ b/arch/mips/au1000/common/reset.c
@@ -1,11 +1,10 @@
 /*
  *
  * BRIEF MODULE DESCRIPTION
- *      Au1000 reset routines.
+ *      Au1xx0 reset routines.
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -28,10 +27,11 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <asm/cacheflush.h>
+
 #include <asm/mach-au1x00/au1000.h>
 
 extern int au_sleep(void);
-extern void (*flush_cache_all)(void);
 
 void au1000_restart(char *command)
 {
@@ -40,8 +40,8 @@ void au1000_restart(char *command)
         u32 prid = read_c0_prid();
 
         printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
-        switch (prid & 0xFF000000)
-        {
+
+        switch (prid & 0xFF000000) {
         case 0x00000000: /* Au1000 */
                 au_writel(0x02, 0xb0000010); /* ac97_enable */
                 au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
@@ -138,9 +138,6 @@ void au1000_restart(char *command)
                 au_writel(0x00, 0xb1900064); /* sys_auxpll */
                 au_writel(0x00, 0xb1900100); /* sys_pininputen */
                 break;
-
-        default:
-                break;
         }
 
         set_c0_status(ST0_BEV | ST0_ERL);
@@ -158,25 +155,25 @@ void au1000_restart(char *command)
 void au1000_halt(void)
 {
 #if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
-        /* power off system */
-        printk("\n** Powering off...\n");
-        au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
+        /* Power off system */
+        printk(KERN_NOTICE "\n** Powering off...\n");
+        au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
         au_sync();
-        while(1); /* should not get here */
+        while (1); /* should not get here */
 #else
         printk(KERN_NOTICE "\n** You can safely turn off the power\n");
 #ifdef CONFIG_MIPS_MIRAGE
         au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
 #endif
 #ifdef CONFIG_MIPS_DB1200
-        au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
+        au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
 #endif
 #ifdef CONFIG_PM
         au_sleep();
 
-        /* should not get here */
-        printk(KERN_ERR "Unable to put cpu in sleep mode\n");
-        while(1);
+        /* Should not get here */
+        printk(KERN_ERR "Unable to put CPU in sleep mode\n");
+        while (1);
 #else
         while (1)
                 __asm__(".set\tmips3\n\t"
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index 0e86f7a6b4a7..1ac6b06f42a3 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -1,7 +1,6 @@
 /*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com
  *
  * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
  *
@@ -48,7 +47,7 @@ void __init plat_mem_setup(void)
 {
         struct  cpu_spec *sp;
         char *argptr;
-        unsigned long prid, cpufreq, bclk = 1;
+        unsigned long prid, cpufreq, bclk;
 
         set_cpuspec();
         sp = cur_cpu_spec[0];
@@ -66,42 +65,39 @@ void __init plat_mem_setup(void)
                 cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
         printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
 
-        bclk = sp->cpu_bclk;
-        if (bclk)
-        {
+        if (sp->cpu_bclk) {
                 /* Enable BCLK switching */
-                bclk = au_readl(0xB190003C);
-                au_writel(bclk | 0x60, 0xB190003C);
-                printk("BCLK switching enabled!\n");
+                bclk = au_readl(SYS_POWERCTRL);
+                au_writel(bclk | 0x60, SYS_POWERCTRL);
+                printk(KERN_INFO "BCLK switching enabled!\n");
         }
 
-        if (sp->cpu_od) {
-                /* Various early Au1000 Errata corrected by this */
-                set_c0_config(1<<19); /* Set Config[OD] */
-        }
-        else {
+        if (sp->cpu_od)
+                /* Various early Au1xx0 errata corrected by this */
+                set_c0_config(1 << 19); /* Set Config[OD] */
+        else
                 /* Clear to obtain best system bus performance */
-                clear_c0_config(1<<19); /* Clear Config[OD] */
-        }
+                clear_c0_config(1 << 19); /* Clear Config[OD] */
 
         argptr = prom_getcmdline();
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
-        if ((argptr = strstr(argptr, "console=")) == NULL) {
+        argptr = strstr(argptr, "console=");
+        if (argptr == NULL) {
                 argptr = prom_getcmdline();
                 strcat(argptr, " console=ttyS0,115200");
         }
 #endif
 
 #ifdef CONFIG_FB_AU1100
-    if ((argptr = strstr(argptr, "video=")) == NULL) {
-        argptr = prom_getcmdline();
-        /* default panel */
-        /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
-    }
+        argptr = strstr(argptr, "video=");
+        if (argptr == NULL) {
+                argptr = prom_getcmdline();
+                /* default panel */
+                /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+        }
 #endif
 
-
 #if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
         /* au1000 does not support vra, au1500 and au1100 do */
         strcat(argptr, " au1000_audio=vra");
@@ -129,7 +125,7 @@ void __init plat_mem_setup(void)
 /* This routine should be valid for all Au1x based boards */
 phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 {
-        /* Don't fixup 36 bit addresses */
+        /* Don't fixup 36-bit addresses */
         if ((phys_addr >> 32) != 0)
                 return phys_addr;
 
@@ -145,17 +141,17 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
         }
 #endif
 
-        /* All Au1x SOCs have a pcmcia controller */
-        /* We setup our 32 bit pseudo addresses to be equal to the
-         * 36 bit addr >> 4, to make it easier to check the address
+        /*
+         * All Au1xx0 SOCs have a PCMCIA controller.
+         * We setup our 32-bit pseudo addresses to be equal to the
+         * 36-bit addr >> 4, to make it easier to check the address
          * and fix it.
-         * The Au1x socket 0 phys attribute address is 0xF 4000 0000.
+         * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
          * The pseudo address we use is 0xF400 0000. Any address over
-         * 0xF400 0000 is a pcmcia pseudo address.
+         * 0xF400 0000 is a PCMCIA pseudo address.
          */
-        if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) {
+        if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
                 return (phys_t)(phys_addr << 4);
-        }
 
         /* default nop */
         return phys_addr;
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index bdb6d73b26fb..563d9390a872 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -25,11 +25,9 @@
  *
  * Setting up the clock on the MIPS boards.
  *
- * Update.  Always configure the kernel with CONFIG_NEW_TIME_C.  This
- * will use the user interface gettimeofday() functions from the
- * arch/mips/kernel/time.c, and we provide the clock interrupt processing
- * and the timer offset compute functions.  If CONFIG_PM is selected,
- * we also ensure the 32KHz timer is available.   -- Dan
+ * We provide the clock interrupt processing and the timer offset compute
+ * functions.  If CONFIG_PM is selected, we also ensure the 32KHz timer is
+ * available.  -- Dan
  */
 
 #include <linux/types.h>
@@ -47,8 +45,7 @@ extern int allow_au1k_wait; /* default off for CP0 Counter */
 #if HZ < 100 || HZ > 1000
 #error "unsupported HZ value! Must be in [100,1000]"
 #endif
-#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */
-extern void startup_match20_interrupt(irq_handler_t handler);
+#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */
 static unsigned long last_pc0, last_match20;
 #endif
 
@@ -61,7 +58,7 @@ static irqreturn_t counter0_irq(int irq, void *dev_id)
 {
         unsigned long pc0;
         int time_elapsed;
-        static int jiffie_drift = 0;
+        static int jiffie_drift;
 
         if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
                 /* should never happen! */
@@ -70,13 +67,11 @@ static irqreturn_t counter0_irq(int irq, void *dev_id)
         }
 
         pc0 = au_readl(SYS_TOYREAD);
-        if (pc0 < last_match20) {
+        if (pc0 < last_match20)
                 /* counter overflowed */
                 time_elapsed = (0xffffffff - last_match20) + pc0;
-        }
-        else {
+        else
                 time_elapsed = pc0 - last_match20;
-        }
 
         while (time_elapsed > 0) {
                 do_timer(1);
@@ -92,8 +87,9 @@ static irqreturn_t counter0_irq(int irq, void *dev_id)
         au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
         au_sync();
 
-        /* our counter ticks at 10.009765625 ms/tick, we we're running
-         * almost 10uS too slow per tick.
+        /*
+         * Our counter ticks at 10.009765625 ms/tick, we we're running
+         * almost 10 uS too slow per tick.
          */
 
         if (jiffie_drift >= 999) {
@@ -117,20 +113,17 @@ struct irqaction counter0_action = {
 /* When we wakeup from sleep, we have to "catch up" on all of the
  * timer ticks we have missed.
  */
-void
-wakeup_counter0_adjust(void)
+void wakeup_counter0_adjust(void)
 {
         unsigned long pc0;
         int time_elapsed;
 
         pc0 = au_readl(SYS_TOYREAD);
-        if (pc0 < last_match20) {
+        if (pc0 < last_match20)
                 /* counter overflowed */
                 time_elapsed = (0xffffffff - last_match20) + pc0;
-        }
-        else {
+        else
                 time_elapsed = pc0 - last_match20;
-        }
 
         while (time_elapsed > 0) {
                 time_elapsed -= MATCH20_INC;
@@ -143,10 +136,8 @@ wakeup_counter0_adjust(void)
 
 }
 
-/* This is just for debugging to set the timer for a sleep delay.
-*/
-void
-wakeup_counter0_set(int ticks)
+/* This is just for debugging to set the timer for a sleep delay. */
+void wakeup_counter0_set(int ticks)
 {
         unsigned long pc0;
 
@@ -157,21 +148,22 @@ wakeup_counter0_set(int ticks)
 }
 #endif
 
-/* I haven't found anyone that doesn't use a 12 MHz source clock,
+/*
+ * I haven't found anyone that doesn't use a 12 MHz source clock,
  * but just in case.....
  */
 #define AU1000_SRC_CLK  12000000
 
 /*
  * We read the real processor speed from the PLL.  This is important
- * because it is more accurate than computing it from the 32KHz
+ * because it is more accurate than computing it from the 32 KHz
  * counter, if it exists.  If we don't have an accurate processor
  * speed, all of the peripherals that derive their clocks based on
  * this advertised speed will introduce error and sometimes not work
  * properly.  This function is futher convoluted to still allow configurations
  * to do that in case they have really, really old silicon with a
- * write-only PLL register, that we need the 32KHz when power management
- * "wait" is enabled, and we need to detect if the 32KHz isn't present
+ * write-only PLL register, that we need the 32 KHz when power management
+ * "wait" is enabled, and we need to detect if the 32 KHz isn't present
  * but requested......got it? :-)               -- Dan
  */
 unsigned long calc_clock(void)
@@ -182,8 +174,7 @@ unsigned long calc_clock(void)
 
         spin_lock_irqsave(&time_lock, flags);
 
-        /* Power management cares if we don't have a 32KHz counter.
-        */
+        /* Power management cares if we don't have a 32 KHz counter. */
         no_au1xxx_32khz = 0;
         counter = au_readl(SYS_COUNTER_CNTRL);
         if (counter & SYS_CNTRL_E0) {
@@ -193,7 +184,7 @@ unsigned long calc_clock(void)
 
                 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
                 /* RTC now ticks at 32.768/16 kHz */
-                au_writel(trim_divide-1, SYS_RTCTRIM);
+                au_writel(trim_divide - 1, SYS_RTCTRIM);
                 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
 
                 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
@@ -215,9 +206,11 @@ unsigned long calc_clock(void)
 #endif
         else
                 cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
+        /* On Alchemy CPU:counter ratio is 1:1 */
         mips_hpt_frequency = cpu_speed;
-        // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
-        set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+        /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
+        set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
+                                                          & 0x03) + 2) * 16));
         spin_unlock_irqrestore(&time_lock, flags);
         return cpu_speed;
 }
@@ -228,10 +221,10 @@ void __init plat_time_init(void)
 
         est_freq += 5000;    /* round */
         est_freq -= est_freq%10000;
-        printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
-               (est_freq%1000000)*100/1000000);
-        set_au1x00_speed(est_freq);
-        set_au1x00_lcd_clock(); // program the LCD clock
+        printk(KERN_INFO "CPU frequency %u.%02u MHz\n",
+               est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
+        set_au1x00_speed(est_freq);
+        set_au1x00_lcd_clock(); /* program the LCD clock */
 
 #ifdef CONFIG_PM
         /*
@@ -243,30 +236,29 @@ void __init plat_time_init(void)
          * counter 0 interrupt as a special irq and it doesn't show
          * up under /proc/interrupts.
          *
-         * Check to ensure we really have a 32KHz oscillator before
+         * Check to ensure we really have a 32 KHz oscillator before
          * we do this.
          */
         if (no_au1xxx_32khz)
-                printk("WARNING: no 32KHz clock found.\n");
+                printk(KERN_WARNING "WARNING: no 32KHz clock found.\n");
         else {
                 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
                 au_writel(0, SYS_TOYWRITE);
                 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
 
-                au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK);
+                au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK);
                 au_writel(~0, SYS_WAKESRC);
                 au_sync();
                 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
 
-                /* setup match20 to interrupt once every HZ */
+                /* Setup match20 to interrupt once every HZ */
                 last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
                 au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
                 au_sync();
                 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
                 setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action);
 
-                /* We can use the real 'wait' instruction.
-                */
+                /* We can use the real 'wait' instruction. */
                 allow_au1k_wait = 1;
         }
 
diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile
index 51d62bd5d900..274db3b55d82 100644
--- a/arch/mips/au1000/db1x00/Makefile
+++ b/arch/mips/au1000/db1x00/Makefile
@@ -1,8 +1,8 @@
 #
-#  Copyright 2000 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#       ppopov@mvista.com or source@mvista.com
+#  Copyright 2000, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
+#
+# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
 #
-# Makefile for the Alchemy Semiconductor Db1x00 board.
 
 lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c
index b7dcbad5c586..9e5ccbbfcedd 100644
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ b/arch/mips/au1000/db1x00/board_setup.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *      Alchemy Db1x00 board setup.
  *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -37,49 +36,49 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 
 void board_reset(void)
 {
-        /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
+        /* Hit BCSR.SW_RESET[RESET] */
         bcsr->swreset = 0x0000;
 }
 
 void __init board_setup(void)
 {
-        u32 pin_func;
+        u32 pin_func = 0;
 
-        pin_func = 0;
-        /* not valid for 1550 */
-
-#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
-        /* set IRFIRSEL instead of GPIO15 */
-        pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
+        /* Not valid for Au1550 */
+#if defined(CONFIG_IRDA) && \
+   (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+        /* Set IRFIRSEL instead of GPIO15 */
+        pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
         au_writel(pin_func, SYS_PINFUNC);
-        /* power off until the driver is in use */
+        /* Power off until the driver is in use */
         bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
-        bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
+        bcsr->resets |=  BCSR_RESETS_IRDA_MODE_OFF;
         au_sync();
 #endif
         bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
 
 #ifdef CONFIG_MIPS_MIRAGE
-        /* enable GPIO[31:0] inputs */
+        /* Enable GPIO[31:0] inputs */
         au_writel(0, SYS_PININPUTEN);
 
-        /* GPIO[20] is output, tristate the other input primary GPIO's */
-        au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR);
+        /* GPIO[20] is output, tristate the other input primary GPIOs */
+        au_writel(~(1 << 20), SYS_TRIOUTCLR);
 
-        /* set GPIO[210:208] instead of SSI_0 */
-        pin_func = au_readl(SYS_PINFUNC) | (u32)(1);
+        /* Set GPIO[210:208] instead of SSI_0 */
+        pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
 
-        /* set GPIO[215:211] for LED's */
-        pin_func |= (u32)((5<<2));
+        /* Set GPIO[215:211] for LEDs */
+        pin_func |= 5 << 2;
 
-        /* set GPIO[214:213] for more LED's */
-        pin_func |= (u32)((5<<12));
+        /* Set GPIO[214:213] for more LEDs */
+        pin_func |= 5 << 12;
 
-        /* set GPIO[207:200] instead of PCMCIA/LCD */
-        pin_func |= (u32)((3<<17));
+        /* Set GPIO[207:200] instead of PCMCIA/LCD */
+        pin_func |= SYS_PF_LCD | SYS_PF_PC;
         au_writel(pin_func, SYS_PINFUNC);
 
-        /* Enable speaker amplifier.  This should
+        /*
+         * Enable speaker amplifier.  This should
          * be part of the audio driver.
          */
         au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
@@ -89,21 +88,21 @@ void __init board_setup(void)
         au_sync();
 
 #ifdef CONFIG_MIPS_DB1000
-    printk("AMD Alchemy Au1000/Db1000 Board\n");
+        printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
 #endif
 #ifdef CONFIG_MIPS_DB1500
-    printk("AMD Alchemy Au1500/Db1500 Board\n");
+        printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
 #endif
 #ifdef CONFIG_MIPS_DB1100
-    printk("AMD Alchemy Au1100/Db1100 Board\n");
+        printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
 #endif
 #ifdef CONFIG_MIPS_BOSPORUS
-    printk("AMD Alchemy Bosporus Board\n");
+        printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
 #endif
 #ifdef CONFIG_MIPS_MIRAGE
-    printk("AMD Alchemy Mirage Board\n");
+        printk(KERN_INFO "AMD Alchemy Mirage Board\n");
 #endif
 #ifdef CONFIG_MIPS_DB1550
-    printk("AMD Alchemy Au1550/Db1550 Board\n");
+        printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
 #endif
 }
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index d3b967caf70c..5ebe0de5e459 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -2,9 +2,8 @@
  * BRIEF MODULE DESCRIPTION
  *      PB1000 board setup
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -49,8 +48,8 @@ void __init prom_init(void)
         unsigned long memsize;
 
         prom_argc = fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg2;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg2;
 
         prom_init_cmdline();
 
@@ -58,6 +57,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = simple_strtol(memsize_str, NULL, 0);
+                memsize = strict_strtol(memsize_str, 0, NULL);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
index eaa50c7b6341..94c090e8bf7a 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -32,32 +32,32 @@
 
 #ifdef CONFIG_MIPS_DB1500
 char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT371   */
- [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+        [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371   */
+        [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
 };
 #endif
 
 #ifdef CONFIG_MIPS_BOSPORUS
 char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 11 - miniPCI  */
- [12] = { -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - SN1741   */
- [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+        [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI  */
+        [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741   */
+        [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
 };
 #endif
 
 #ifdef CONFIG_MIPS_MIRAGE
 char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTD, INTX, INTX, INTX},   /* IDSEL 11 - SMI VGX */
- [12] = { -1, INTX, INTX, INTC, INTX},   /* IDSEL 12 - PNX1300 */
- [13] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 13 - miniPCI */
+        [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
+        [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
+        [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
 };
 #endif
 
 #ifdef CONFIG_MIPS_DB1550
 char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTC, INTX, INTX, INTX},   /* IDSEL 11 - on-board HPT371    */
- [12] = { -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
- [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
+        [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
+        [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+        [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
 };
 #endif
 
diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile
index 85a90941de4f..7c67b3d33bec 100644
--- a/arch/mips/au1000/mtx-1/Makefile
+++ b/arch/mips/au1000/mtx-1/Makefile
@@ -1,7 +1,6 @@
 #
 #  Copyright 2003 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#       ppopov@mvista.com or source@mvista.com
+#  Author: MontaVista Software, Inc. <source@mvista.com>
 #       Bruno Randolf <bruno.randolf@4g-systems.biz>
 #
 # Makefile for 4G Systems MTX-1 board.
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index 5736354829c6..3f8079186cf2 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *      4G Systems MTX-1 board setup.
  *
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *         Bruno Randolf <bruno.randolf@4g-systems.biz>
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -34,7 +33,7 @@
 #include <asm/mach-au1x00/au1000.h>
 
 extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int    mtx1_pci_idsel(unsigned int devsel, int assert);
+int mtx1_pci_idsel(unsigned int devsel, int assert);
 
 void board_reset(void)
 {
@@ -45,36 +44,36 @@ void board_reset(void)
 void __init board_setup(void)
 {
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-        // enable USB power switch
-        au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
-        au_writel( 0x100000, GPIO2_OUTPUT );
+        /* Enable USB power switch */
+        au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
+        au_writel(0x100000, GPIO2_OUTPUT);
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
 #ifdef CONFIG_PCI
 #if defined(__MIPSEB__)
-        au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+        au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
 #else
         au_writel(0xf, Au1500_PCI_CFG);
 #endif
 #endif
 
-        // initialize sys_pinfunc:
-        au_writel( SYS_PF_NI2, SYS_PINFUNC );
+        /* Initialize sys_pinfunc */
+        au_writel(SYS_PF_NI2, SYS_PINFUNC);
 
-        // initialize GPIO
-        au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
-        au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF
-        au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF
-        au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
-        au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF
+        /* Initialize GPIO */
+        au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+        au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
+        au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
+        au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+        au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
 
-        // enable LED and set it to green
-        au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR );
-        au_writel( 0x18000800, GPIO2_OUTPUT );
+        /* Enable LED and set it to green */
+        au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
+        au_writel(0x18000800, GPIO2_OUTPUT);
 
         board_pci_idsel = mtx1_pci_idsel;
 
-        printk("4G Systems MTX-1 Board\n");
+        printk(KERN_INFO "4G Systems MTX-1 Board\n");
 }
 
 int
@@ -82,20 +81,18 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
 {
 #define MTX_IDSEL_ONLY_0_AND_3 0
 #if MTX_IDSEL_ONLY_0_AND_3
-       if (devsel != 0 && devsel != 3) {
-               printk("*** not 0 or 3\n");
-               return 0;
-       }
+        if (devsel != 0 && devsel != 3) {
+                printk(KERN_ERR "*** not 0 or 3\n");
+                return 0;
+        }
 #endif
 
-       if (assert && devsel != 0) {
-               // suppress signal to cardbus
-               au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
-       }
-       else {
-               au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
-       }
-       au_sync_udelay(1);
-       return 1;
+        if (assert && devsel != 0)
+                /* Suppress signal to Cardbus */
+                au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
+        else
+                au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+        au_sync_udelay(1);
+        return 1;
 }
 
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index c015cbce1cca..33a4aebe0cba 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *      4G Systems MTX-1 board setup
  *
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *         Bruno Randolf <bruno.randolf@4g-systems.biz>
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -47,8 +46,8 @@ void __init prom_init(void)
         unsigned long memsize;
 
         prom_argc = fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg2;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg2;
 
         prom_init_cmdline();
 
@@ -56,6 +55,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = simple_strtol(memsize_str, NULL, 0);
+                memsize = strict_strtol(memsize_str, 0, NULL);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index 78d70c42c9db..f2bf02951e9c 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -31,18 +31,18 @@
 #include <asm/mach-au1x00/au1000.h>
 
 char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTA, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
- [1] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 02 - AdapterB-Slot0 (top)    */
- [3] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 04 - AdapterC-Slot0 (top)    */
- [5] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 06 - AdapterD-Slot0 (top)    */
- [7] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+        [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+        [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+        [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+        [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+        [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+        [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+        [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+        [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-       { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+       { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
        { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
        { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
        { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
index a7edbf0829ac..9807be37c32f 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -21,11 +21,10 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/gpio.h>
-
 static struct gpio_keys_button mtx1_gpio_button[] = {
         {
                 .gpio = 207,
diff --git a/arch/mips/au1000/pb1000/Makefile b/arch/mips/au1000/pb1000/Makefile
index daa1a507e72f..99bbec0ca41b 100644
--- a/arch/mips/au1000/pb1000/Makefile
+++ b/arch/mips/au1000/pb1000/Makefile
@@ -1,8 +1,8 @@
 #
-#  Copyright 2000 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#       ppopov@mvista.com or source@mvista.com
+#  Copyright 2000, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
+#
+# Makefile for the Alchemy Semiconductor Pb1000 board.
 #
-# Makefile for the Alchemy Semiconductor PB1000 board.
 
 lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c
index 33f15acc1b17..25df167a95b3 100644
--- a/arch/mips/au1000/pb1000/board_setup.c
+++ b/arch/mips/au1000/pb1000/board_setup.c
@@ -1,7 +1,6 @@
 /*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -40,128 +39,126 @@ void __init board_setup(void)
         u32 sys_freqctrl, sys_clksrc;
         u32 prid = read_c0_prid();
 
-        // set AUX clock to 12MHz * 8 = 96 MHz
+        /* Set AUX clock to 12 MHz * 8 = 96 MHz */
         au_writel(8, SYS_AUXPLL);
         au_writel(0, SYS_PINSTATERD);
         udelay(100);
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-        /* zero and disable FREQ2 */
+        /* Zero and disable FREQ2 */
         sys_freqctrl = au_readl(SYS_FREQCTRL0);
         sys_freqctrl &= ~0xFFF00000;
         au_writel(sys_freqctrl, SYS_FREQCTRL0);
 
-        /* zero and disable USBH/USBD clocks */
+        /* Zero and disable USBH/USBD clocks */
         sys_clksrc = au_readl(SYS_CLKSRC);
-        sys_clksrc &= ~0x00007FE0;
+        sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+                        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
         au_writel(sys_clksrc, SYS_CLKSRC);
 
         sys_freqctrl = au_readl(SYS_FREQCTRL0);
         sys_freqctrl &= ~0xFFF00000;
 
         sys_clksrc = au_readl(SYS_CLKSRC);
-        sys_clksrc &= ~0x00007FE0;
+        sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+                        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
 
-        switch (prid & 0x000000FF)
-        {
+        switch (prid & 0x000000FF) {
         case 0x00: /* DA */
         case 0x01: /* HA */
         case 0x02: /* HB */
-        /* CPU core freq to 48MHz to slow it way down... */
-        au_writel(4, SYS_CPUPLL);
+                /* CPU core freq to 48 MHz to slow it way down... */
+                au_writel(4, SYS_CPUPLL);
 
-        /*
-         * Setup 48MHz FREQ2 from CPUPLL for USB Host
-         */
-        /* FRDIV2=3 -> div by 8 of 384MHz -> 48MHz */
-        sys_freqctrl |= ((3<<22) | (1<<21) | (0<<20));
-        au_writel(sys_freqctrl, SYS_FREQCTRL0);
+                /*
+                 * Setup 48 MHz FREQ2 from CPUPLL for USB Host
+                 * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
+                 */
+                sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
+                au_writel(sys_freqctrl, SYS_FREQCTRL0);
 
-        /* CPU core freq to 384MHz */
-        au_writel(0x20, SYS_CPUPLL);
+                /* CPU core freq to 384 MHz */
+                au_writel(0x20, SYS_CPUPLL);
 
-        printk("Au1000: 48MHz OHCI workaround enabled\n");
+                printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
                 break;
 
-        default:  /* HC and newer */
-        // FREQ2 = aux/2 = 48 MHz
-        sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
-        au_writel(sys_freqctrl, SYS_FREQCTRL0);
+        default: /* HC and newer */
+                /* FREQ2 = aux / 2 = 48 MHz */
+                sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+                                 SYS_FC_FE2 | SYS_FC_FS2;
+                au_writel(sys_freqctrl, SYS_FREQCTRL0);
                 break;
         }
 
         /*
-         * Route 48MHz FREQ2 into USB Host and/or Device
+         * Route 48 MHz FREQ2 into USB Host and/or Device
          */
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-        sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
+        sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
         au_writel(sys_clksrc, SYS_CLKSRC);
 
-        // configure pins GPIO[14:9] as GPIO
-        pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080);
+        /* Configure pins GPIO[14:9] as GPIO */
+        pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
 
-        // 2nd USB port is USB host
-        pin_func |= 0x8000;
+        /* 2nd USB port is USB host */
+        pin_func |= SYS_PF_USB;
 
         au_writel(pin_func, SYS_PINFUNC);
         au_writel(0x2800, SYS_TRIOUTCLR);
         au_writel(0x0030, SYS_OUTPUTCLR);
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
-        // make gpio 15 an input (for interrupt line)
-        pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);
-        // we don't need I2S, so make it available for GPIO[31:29]
-        pin_func |= (1<<5);
+        /* Make GPIO 15 an input (for interrupt line) */
+        pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
+        /* We don't need I2S, so make it available for GPIO[31:29] */
+        pin_func |= SYS_PF_I2S;
         au_writel(pin_func, SYS_PINFUNC);
 
         au_writel(0x8000, SYS_TRIOUTCLR);
 
-        static_cfg0 = au_readl(MEM_STCFG0) & (u32)(~0xc00);
+        static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
         au_writel(static_cfg0, MEM_STCFG0);
 
-        // configure RCE2* for LCD
+        /* configure RCE2* for LCD */
         au_writel(0x00000004, MEM_STCFG2);
 
-        // MEM_STTIME2
+        /* MEM_STTIME2 */
         au_writel(0x09000000, MEM_STTIME2);
 
-        // Set 32-bit base address decoding for RCE2*
+        /* Set 32-bit base address decoding for RCE2* */
         au_writel(0x10003ff0, MEM_STADDR2);
 
-        // PCI CPLD setup
-        // expand CE0 to cover PCI
+        /*
+         * PCI CPLD setup
+         * Expand CE0 to cover PCI
+         */
         au_writel(0x11803e40, MEM_STADDR1);
 
-        // burst visibility on
+        /* Burst visibility on */
         au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
 
-        au_writel(0x83, MEM_STCFG1);         // ewait enabled, flash timing
-        au_writel(0x33030a10, MEM_STTIME1);   // slower timing for FPGA
+        au_writel(0x83, MEM_STCFG1);         /* ewait enabled, flash timing */
+        au_writel(0x33030a10, MEM_STTIME1);  /* slower timing for FPGA */
 
-        /* setup the static bus controller */
+        /* Setup the static bus controller */
         au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
         au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
         au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
 
-#ifdef CONFIG_PCI
-        au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
-        au_writel(0, SDRAM_MBAR);        // set mbar to 0
-        au_writel(0x2, SDRAM_CMD);       // enable memory accesses
-        au_sync_delay(1);
-#endif
-
-        /* Enable Au1000 BCLK switching - note: sed1356 must not use
-         * its BCLK (Au1000 LCLK) for any timings */
-        switch (prid & 0x000000FF)
-        {
+        /*
+         * Enable Au1000 BCLK switching - note: sed1356 must not use
+         * its BCLK (Au1000 LCLK) for any timings
+         */
+        switch (prid & 0x000000FF) {
         case 0x00: /* DA */
         case 0x01: /* HA */
         case 0x02: /* HB */
                 break;
         default:  /* HC and newer */
-                /* Enable sys bus clock divider when IDLE state or no bus
-                   activity. */
+                /*
+                 * Enable sys bus clock divider when IDLE state or no bus
+                 * activity.
+                 */
                 au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
                 break;
         }
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 549447df71d6..3837365d613d 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -1,10 +1,9 @@
 /*
  * BRIEF MODULE DESCRIPTION
- *      PB1000 board setup
+ *      Pb1000 board setup
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -44,16 +43,15 @@ void __init prom_init(void)
         unsigned char *memsize_str;
         unsigned long memsize;
 
-        prom_argc = (int) fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg2;
+        prom_argc = (int)fw_arg0;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg2;
 
         prom_init_cmdline();
         memsize_str = prom_getenv("memsize");
-        if (!memsize_str) {
+        if (!memsize_str)
                 memsize = 0x04000000;
-        } else {
-                memsize = simple_strtol(memsize_str, NULL, 0);
-        }
+        else
+                memsize = strict_strtol(memsize_str, 0, NULL);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1100/Makefile b/arch/mips/au1000/pb1100/Makefile
index 996236df6375..793e97c49e46 100644
--- a/arch/mips/au1000/pb1100/Makefile
+++ b/arch/mips/au1000/pb1100/Makefile
@@ -1,8 +1,8 @@
 #
-#  Copyright 2000,2001 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#       ppopov@mvista.com or source@mvista.com
+#  Copyright 2000, 2001, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
 #
 # Makefile for the Alchemy Semiconductor Pb1100 board.
+#
 
 lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c
index 656164c8e9ca..c0bfd59a7a36 100644
--- a/arch/mips/au1000/pb1100/board_setup.c
+++ b/arch/mips/au1000/pb1100/board_setup.c
@@ -1,7 +1,6 @@
 /*
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -32,15 +31,15 @@
 
 void board_reset(void)
 {
-    /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
-    au_writel(0x00000000, 0xAE00001C);
+        /* Hit BCSR.RST_VDDI[SOFT_RESET] */
+        au_writel(0x00000000, PB1100_RST_VDDI);
 }
 
 void __init board_setup(void)
 {
-        volatile void __iomem * base = (volatile void __iomem *) 0xac000000UL;
+        volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
 
-        // set AUX clock to 12MHz * 8 = 96 MHz
+        /* Set AUX clock to 12 MHz * 8 = 96 MHz */
         au_writel(8, SYS_AUXPLL);
         au_writel(0, SYS_PININPUTEN);
         udelay(100);
@@ -49,44 +48,47 @@ void __init board_setup(void)
         {
                 u32 pin_func, sys_freqctrl, sys_clksrc;
 
-                // configure pins GPIO[14:9] as GPIO
-                pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
+                /* Configure pins GPIO[14:9] as GPIO */
+                pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
 
-                /* zero and disable FREQ2 */
+                /* Zero and disable FREQ2 */
                 sys_freqctrl = au_readl(SYS_FREQCTRL0);
                 sys_freqctrl &= ~0xFFF00000;
                 au_writel(sys_freqctrl, SYS_FREQCTRL0);
 
-                /* zero and disable USBH/USBD/IrDA clock */
+                /* Zero and disable USBH/USBD/IrDA clock */
                 sys_clksrc = au_readl(SYS_CLKSRC);
-                sys_clksrc &= ~0x0000001F;
+                sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
                 au_writel(sys_clksrc, SYS_CLKSRC);
 
                 sys_freqctrl = au_readl(SYS_FREQCTRL0);
                 sys_freqctrl &= ~0xFFF00000;
 
                 sys_clksrc = au_readl(SYS_CLKSRC);
-                sys_clksrc &= ~0x0000001F;
+                sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
 
-                // FREQ2 = aux/2 = 48 MHz
-                sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+                /* FREQ2 = aux / 2 = 48 MHz */
+                sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+                                SYS_FC_FE2 | SYS_FC_FS2;
                 au_writel(sys_freqctrl, SYS_FREQCTRL0);
 
                 /*
-                 * Route 48MHz FREQ2 into USBH/USBD/IrDA
+                 * Route 48 MHz FREQ2 into USBH/USBD/IrDA
                  */
-                sys_clksrc |= ((4<<2) | (0<<1) | 0 );
+                sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT;
                 au_writel(sys_clksrc, SYS_CLKSRC);
 
-                /* setup the static bus controller */
+                /* Setup the static bus controller */
                 au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
                 au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
                 au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
 
-                // get USB Functionality pin state (device vs host drive pins)
-                pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-                // 2nd USB port is USB host
-                pin_func |= 0x8000;
+                /*
+                 * Get USB Functionality pin state (device vs host drive pins).
+                 */
+                pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+                /* 2nd USB port is USB host. */
+                pin_func |= SYS_PF_USB;
                 au_writel(pin_func, SYS_PINFUNC);
         }
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
@@ -94,12 +96,12 @@ void __init board_setup(void)
         /* Enable sys bus clock divider when IDLE state or no bus activity. */
         au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
 
-        // Enable the RTC if not already enabled
+        /* Enable the RTC if not already enabled. */
         if (!(readb(base + 0x28) & 0x20)) {
                 writeb(readb(base + 0x28) | 0x20, base + 0x28);
                 au_sync();
         }
-        // Put the clock in BCD mode
+        /* Put the clock in BCD mode. */
         if (readb(base + 0x2C) & 0x4) { /* reg B */
                 writeb(readb(base + 0x2c) & ~0x4, base + 0x2c);
                 au_sync();
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index c91344648ed3..8355483f3de2 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *      Pb1100 board setup
  *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -46,8 +45,8 @@ void __init prom_init(void)
         unsigned long memsize;
 
         prom_argc = fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg3;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg3;
 
         prom_init_cmdline();
 
@@ -55,7 +54,7 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = simple_strtol(memsize_str, NULL, 0);
+                memsize = strict_strtol(memsize_str, 0, NULL);
 
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/au1000/pb1100/irqmap.c
index b5021e3d477f..9b7dd8b41283 100644
--- a/arch/mips/au1000/pb1100/irqmap.c
+++ b/arch/mips/au1000/pb1100/irqmap.c
@@ -1,6 +1,6 @@
 /*
  * BRIEF MODULE DESCRIPTION
- *      Au1xxx irq map table
+ *      Au1xx0 IRQ map table
  *
  * Copyright 2003 Embedded Edge, LLC
  *              dan@embeddededge.com
@@ -31,10 +31,10 @@
 #include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-        { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
-        { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
-        { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
-        { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ#
+        { AU1000_GPIO_9,  INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
+        { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
+        { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
+        { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
 };
 
 int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
index 4fe02ea65a60..d678adf7ce85 100644
--- a/arch/mips/au1000/pb1200/Makefile
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -1,5 +1,5 @@
 #
-# Makefile for the Alchemy Semiconductor PB1200 board.
+# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
 #
 
 lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
index 4493a792cc4c..6cb2115059ad 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -27,16 +27,8 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 
-#include <au1000.h>
 #include <prom.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#endif
+#include <au1xxx.h>
 
 extern void _board_init_irq(void);
 extern void (*board_init_irq)(void);
@@ -53,56 +45,57 @@ void __init board_setup(void)
 
 #if 0
         {
-        u32 pin_func;
-
-        /* Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
-         * but it is board specific code, so put it here.
-         */
-        pin_func = au_readl(SYS_PINFUNC);
-        au_sync();
-        pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
-        au_writel(pin_func, SYS_PINFUNC);
-
-        au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
-        au_sync();
+                u32 pin_func;
+
+                /*
+                 * Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
+                 * but it is board specific code, so put it here.
+                 */
+                pin_func = au_readl(SYS_PINFUNC);
+                au_sync();
+                pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+                au_writel(pin_func, SYS_PINFUNC);
+
+                au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
+                au_sync();
         }
 #endif
 
 #if defined(CONFIG_I2C_AU1550)
         {
-        u32 freq0, clksrc;
-        u32 pin_func;
-
-        /* Select SMBUS in CPLD */
-        bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
-
-        pin_func = au_readl(SYS_PINFUNC);
-        au_sync();
-        pin_func &= ~(3<<17 | 1<<4);
-        /* Set GPIOs correctly */
-        pin_func |= 2<<17;
-        au_writel(pin_func, SYS_PINFUNC);
-        au_sync();
-
-        /* The i2c driver depends on 50Mhz clock */
-        freq0 = au_readl(SYS_FREQCTRL0);
-        au_sync();
-        freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
-        freq0 |= (3<<SYS_FC_FRDIV1_BIT);
-        /* 396Mhz / (3+1)*2 == 49.5Mhz */
-        au_writel(freq0, SYS_FREQCTRL0);
-        au_sync();
-        freq0 |= SYS_FC_FE1;
-        au_writel(freq0, SYS_FREQCTRL0);
-        au_sync();
-
-        clksrc = au_readl(SYS_CLKSRC);
-        au_sync();
-        clksrc &= ~0x01f00000;
-        /* bit 22 is EXTCLK0 for PSC0 */
-        clksrc |= (0x3 << 22);
-        au_writel(clksrc, SYS_CLKSRC);
-        au_sync();
+                u32 freq0, clksrc;
+                u32 pin_func;
+
+                /* Select SMBus in CPLD */
+                bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+
+                pin_func = au_readl(SYS_PINFUNC);
+                au_sync();
+                pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+                /* Set GPIOs correctly */
+                pin_func |= 2 << 17;
+                au_writel(pin_func, SYS_PINFUNC);
+                au_sync();
+
+                /* The I2C driver depends on 50 MHz clock */
+                freq0 = au_readl(SYS_FREQCTRL0);
+                au_sync();
+                freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+                freq0 |= 3 << SYS_FC_FRDIV1_BIT;
+                /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
+                au_writel(freq0, SYS_FREQCTRL0);
+                au_sync();
+                freq0 |= SYS_FC_FE1;
+                au_writel(freq0, SYS_FREQCTRL0);
+                au_sync();
+
+                clksrc = au_readl(SYS_CLKSRC);
+                au_sync();
+                clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
+                /* Bit 22 is EXTCLK0 for PSC0 */
+                clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
+                au_writel(clksrc, SYS_CLKSRC);
+                au_sync();
         }
 #endif
 
@@ -116,27 +109,27 @@ void __init board_setup(void)
 #endif
 #endif
 
-        /* The Pb1200 development board uses external MUX for PSC0 to
-        support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
-        */
+        /*
+         * The Pb1200 development board uses external MUX for PSC0 to
+         * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+         */
 #ifdef CONFIG_I2C_AU1550
-        bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+        bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
 #endif
         au_sync();
 
 #ifdef CONFIG_MIPS_PB1200
-        printk("AMD Alchemy Pb1200 Board\n");
+        printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
 #endif
 #ifdef CONFIG_MIPS_DB1200
-        printk("AMD Alchemy Db1200 Board\n");
+        printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
 #endif
 
         /* Setup Pb1200 External Interrupt Controller */
         board_init_irq = _board_init_irq;
 }
 
-int
-board_au1200fb_panel(void)
+int board_au1200fb_panel(void)
 {
         BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
         int p;
@@ -147,23 +140,23 @@ board_au1200fb_panel(void)
         return p;
 }
 
-int
-board_au1200fb_panel_init(void)
+int board_au1200fb_panel_init(void)
 {
         /* Apply power */
-    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-        bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
-        /*printk("board_au1200fb_panel_init()\n"); */
+        BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+        bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+        /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
         return 0;
 }
 
-int
-board_au1200fb_panel_shutdown(void)
+int board_au1200fb_panel_shutdown(void)
 {
         /* Remove power */
-    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-        bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
-        /*printk("board_au1200fb_panel_shutdown()\n"); */
+        BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+        bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+                         BCSR_BOARD_LCDBL);
+        /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
         return 0;
 }
-
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 72af5500660b..09fd63b86062 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *      PB1200 board setup
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -45,16 +44,15 @@ void __init prom_init(void)
         unsigned char *memsize_str;
         unsigned long memsize;
 
-        prom_argc = (int) fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg2;
+        prom_argc = (int)fw_arg0;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg2;
 
         prom_init_cmdline();
         memsize_str = prom_getenv("memsize");
-        if (!memsize_str) {
+        if (!memsize_str)
                 memsize = 0x08000000;
-        } else {
-                memsize = simple_strtol(memsize_str, NULL, 0);
-        }
+        else
+                memsize = strict_strtol(memsize_str, 0, NULL);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
index e61eb8e0b76b..2a505ad8715b 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -39,25 +39,25 @@
 #endif
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-        { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+        /* This is external interrupt cascade */
+        { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
 };
 
 int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
 
 /*
- *      Support for External interrupts on the PbAu1200 Development platform.
+ * Support for External interrupts on the Pb1200 Development platform.
  */
-static volatile int pb1200_cascade_en=0;
+static volatile int pb1200_cascade_en;
 
-irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
+irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
 {
         unsigned short bisr = bcsr->int_status;
         int extirq_nr = 0;
 
-        /* Clear all the edge interrupts. This has no effect on level */
+        /* Clear all the edge interrupts. This has no effect on level. */
         bcsr->int_status = bisr;
-        for( ; bisr; bisr &= (bisr-1) )
-        {
+        for ( ; bisr; bisr &= bisr - 1) {
                 extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
                 /* Ack and dispatch IRQ */
                 do_IRQ(extirq_nr);
@@ -68,26 +68,20 @@ irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
 
 inline void pb1200_enable_irq(unsigned int irq_nr)
 {
-        bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
-        bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+        bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+        bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
 }
 
 inline void pb1200_disable_irq(unsigned int irq_nr)
 {
-        bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
-        bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+        bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+        bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
 }
 
 static unsigned int pb1200_setup_cascade(void)
 {
-        int err;
-
-        err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
-                          0, "Pb1200 Cascade", &pb1200_cascade_handler);
-        if (err)
-                return err;
-
-        return 0;
+        return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+                           0, "Pb1200 Cascade", &pb1200_cascade_handler);
 }
 
 static unsigned int pb1200_startup_irq(unsigned int irq)
@@ -132,23 +126,23 @@ void _board_init_irq(void)
         unsigned int irq;
 
 #ifdef CONFIG_MIPS_PB1200
-        /* We have a problem with CPLD rev3. Enable a workaround */
+        /* We have a problem with CPLD rev 3. */
         if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
-                printk("updated to latest revision. This software will not\n");
-                printk("work on anything less than CPLD rev4\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+                printk(KERN_ERR "updated to latest revision. This software will\n");
+                printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
                 panic("Game over.  Your score is 0.");
         }
 #endif
@@ -161,6 +155,6 @@ void _board_init_irq(void)
 
         /*
          * GPIO_7 can not be hooked here, so it is hooked upon first
-         * request of any source attached to the cascade
+         * request of any source attached to the cascade.
          */
 }
diff --git a/arch/mips/au1000/pb1500/Makefile b/arch/mips/au1000/pb1500/Makefile
index 97a730813cd3..602f38df20bb 100644
--- a/arch/mips/au1000/pb1500/Makefile
+++ b/arch/mips/au1000/pb1500/Makefile
@@ -1,8 +1,8 @@
 #
-#  Copyright 2000,2001 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#       ppopov@mvista.com or source@mvista.com
+#  Copyright 2000, 2001, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
 #
 # Makefile for the Alchemy Semiconductor Pb1500 board.
+#
 
 lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/au1000/pb1500/board_setup.c
index 24c652e8ec4b..035771c6e5b8 100644
--- a/arch/mips/au1000/pb1500/board_setup.c
+++ b/arch/mips/au1000/pb1500/board_setup.c
@@ -1,7 +1,6 @@
 /*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -32,8 +31,8 @@
 
 void board_reset(void)
 {
-    /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
-    au_writel(0x00000000, 0xAE00001C);
+        /* Hit BCSR.RST_VDDI[SOFT_RESET] */
+        au_writel(0x00000000, PB1500_RST_VDDI);
 }
 
 void __init board_setup(void)
@@ -42,7 +41,7 @@ void __init board_setup(void)
         u32 sys_freqctrl, sys_clksrc;
 
         sys_clksrc = sys_freqctrl = pin_func = 0;
-        // set AUX clock to 12MHz * 8 = 96 MHz
+        /* Set AUX clock to 12 MHz * 8 = 96 MHz */
         au_writel(8, SYS_AUXPLL);
         au_writel(0, SYS_PINSTATERD);
         udelay(100);
@@ -51,51 +50,48 @@ void __init board_setup(void)
 
         /* GPIO201 is input for PCMCIA card detect */
         /* GPIO203 is input for PCMCIA interrupt request */
-        au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
+        au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR);
 
-        /* zero and disable FREQ2 */
+        /* Zero and disable FREQ2 */
         sys_freqctrl = au_readl(SYS_FREQCTRL0);
         sys_freqctrl &= ~0xFFF00000;
         au_writel(sys_freqctrl, SYS_FREQCTRL0);
 
         /* zero and disable USBH/USBD clocks */
         sys_clksrc = au_readl(SYS_CLKSRC);
-        sys_clksrc &= ~0x00007FE0;
+        sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+                        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
         au_writel(sys_clksrc, SYS_CLKSRC);
 
         sys_freqctrl = au_readl(SYS_FREQCTRL0);
         sys_freqctrl &= ~0xFFF00000;
 
         sys_clksrc = au_readl(SYS_CLKSRC);
-        sys_clksrc &= ~0x00007FE0;
+        sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+                        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
 
-        // FREQ2 = aux/2 = 48 MHz
-        sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+        /* FREQ2 = aux/2 = 48 MHz */
+        sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2;
         au_writel(sys_freqctrl, SYS_FREQCTRL0);
 
         /*
          * Route 48MHz FREQ2 into USB Host and/or Device
          */
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-        sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
+        sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
         au_writel(sys_clksrc, SYS_CLKSRC);
 
-
-        pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-        // 2nd USB port is USB host
-        pin_func |= 0x8000;
+        pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+        /* 2nd USB port is USB host */
+        pin_func |= SYS_PF_USB;
         au_writel(pin_func, SYS_PINFUNC);
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
-
-
 #ifdef CONFIG_PCI
-        // Setup PCI bus controller
+        /* Setup PCI bus controller */
         au_writel(0, Au1500_PCI_CMEM);
         au_writel(0x00003fff, Au1500_CFG_BASE);
 #if defined(__MIPSEB__)
-        au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+        au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
 #else
         au_writel(0xf, Au1500_PCI_CFG);
 #endif
@@ -112,11 +108,11 @@ void __init board_setup(void)
 
         /* Enable the RTC if not already enabled */
         if (!(au_readl(0xac000028) & 0x20)) {
-                printk("enabling clock ...\n");
+                printk(KERN_INFO "enabling clock ...\n");
                 au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
         }
         /* Put the clock in BCD mode */
-        if (au_readl(0xac00002C) & 0x4) { /* reg B */
+        if (au_readl(0xac00002c) & 0x4) { /* reg B */
                 au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
                 au_sync();
         }
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 488507c07db9..49f51e165863 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -1,11 +1,10 @@
 /*
  *
  * BRIEF MODULE DESCRIPTION
- *      PB1500 board setup
+ *      Pb1500 board setup
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -45,16 +44,15 @@ void __init prom_init(void)
         unsigned char *memsize_str;
         unsigned long memsize;
 
-        prom_argc = (int) fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg2;
+        prom_argc = (int)fw_arg0;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg2;
 
         prom_init_cmdline();
         memsize_str = prom_getenv("memsize");
-        if (!memsize_str) {
+        if (!memsize_str)
                 memsize = 0x04000000;
-        } else {
-                memsize = simple_strtol(memsize_str, NULL, 0);
-        }
+        else
+                memsize = strict_strtol(memsize_str, 0, NULL);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c
index 4817ab44d07f..39c4682766a8 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/au1000/pb1500/irqmap.c
@@ -31,12 +31,12 @@
 #include <asm/mach-au1x00/au1000.h>
 
 char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT370   */
- [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+        [12] = { -1, INTA, INTX, INTX, INTX },   /* IDSEL 12 - HPT370   */
+        [13] = { -1, INTA, INTB, INTC, INTD },   /* IDSEL 13 - PCI slot */
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-        { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+        { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
         { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
         { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
         { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1550/Makefile b/arch/mips/au1000/pb1550/Makefile
index aa35bc6cb8cf..7d8beca87fa5 100644
--- a/arch/mips/au1000/pb1550/Makefile
+++ b/arch/mips/au1000/pb1550/Makefile
@@ -1,9 +1,8 @@
 #
-#  Copyright 2000 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#       ppopov@mvista.com or source@mvista.com
+#  Copyright 2000, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
 #
-# Makefile for the Alchemy Semiconductor PB1000 board.
+# Makefile for the Alchemy Semiconductor Pb1550 board.
 #
 
 lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/au1000/pb1550/board_setup.c
index 45d60872b565..0ed76b64b6ab 100644
--- a/arch/mips/au1000/pb1550/board_setup.c
+++ b/arch/mips/au1000/pb1550/board_setup.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *      Alchemy Pb1550 board setup.
  *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -35,15 +34,16 @@
 
 void board_reset(void)
 {
-    /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
-        au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
+        /* Hit BCSR.SYSTEM[RESET] */
+        au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
 }
 
 void __init board_setup(void)
 {
         u32 pin_func;
 
-        /* Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
+        /*
+         * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
          * but it is board specific code, so put it here.
          */
         pin_func = au_readl(SYS_PINFUNC);
@@ -51,8 +51,8 @@ void __init board_setup(void)
         pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
         au_writel(pin_func, SYS_PINFUNC);
 
-        au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+        au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
         au_sync();
 
-        printk("AMD Alchemy Pb1550 Board\n");
+        printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
 }
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index f6b2fc587980..1b5f58434bb7 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -1,11 +1,10 @@
 /*
  *
  * BRIEF MODULE DESCRIPTION
- *      PB1550 board setup
+ *      Pb1550 board setup
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -45,16 +44,15 @@ void __init prom_init(void)
         unsigned char *memsize_str;
         unsigned long memsize;
 
-        prom_argc = (int) fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg2;
+        prom_argc = (int)fw_arg0;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg2;
 
         prom_init_cmdline();
         memsize_str = prom_getenv("memsize");
-        if (!memsize_str) {
+        if (!memsize_str)
                 memsize = 0x08000000;
-        } else {
-                memsize = simple_strtol(memsize_str, NULL, 0);
-        }
+        else
+                memsize = strict_strtol(memsize_str, 0, NULL);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c
index e1dac37af08a..a02a4d1fa899 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/au1000/pb1550/irqmap.c
@@ -1,6 +1,6 @@
 /*
  * BRIEF MODULE DESCRIPTION
- *      Au1xxx irq map table
+ *      Au1xx0 IRQ map table
  *
  * Copyright 2003 Embedded Edge, LLC
  *              dan@embeddededge.com
@@ -31,8 +31,8 @@
 #include <asm/mach-au1x00/au1000.h>
 
 char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
- [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
+        [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
+        [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
diff --git a/arch/mips/au1000/xxs1500/Makefile b/arch/mips/au1000/xxs1500/Makefile
index 44d7f7056ae7..db3c526f64d8 100644
--- a/arch/mips/au1000/xxs1500/Makefile
+++ b/arch/mips/au1000/xxs1500/Makefile
@@ -1,7 +1,6 @@
 #
 #  Copyright 2003 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#       ppopov@mvista.com or source@mvista.com
+#  Author: MontaVista Software, Inc. <source@mvista.com>
 #
 # Makefile for MyCable XXS1500 board.
 #
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index 79d1798621bf..4c587acac5c3 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -1,7 +1,6 @@
 /*
- * Copyright 2000-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -39,40 +38,40 @@ void __init board_setup(void)
 {
         u32 pin_func;
 
-        // set multiple use pins (UART3/GPIO) to UART (it's used as UART too)
-        pin_func = au_readl(SYS_PINFUNC) & (u32)(~SYS_PF_UR3);
+        /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
+        pin_func  = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
         pin_func |= SYS_PF_UR3;
         au_writel(pin_func, SYS_PINFUNC);
 
-        // enable UART
-        au_writel(0x01, UART3_ADDR+UART_MOD_CNTRL); // clock enable (CE)
+        /* Enable UART */
+        au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
         mdelay(10);
-        au_writel(0x03, UART3_ADDR+UART_MOD_CNTRL); // CE and "enable"
+        au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
         mdelay(10);
 
-        // enable DTR = USB power up
-        au_writel(0x01, UART3_ADDR+UART_MCR); //? UART_MCR_DTR is 0x01???
+        /* Enable DTR = USB power up */
+        au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
 
 #ifdef CONFIG_PCMCIA_XXS1500
-        /* setup pcmcia signals */
+        /* Setup PCMCIA signals */
         au_writel(0, SYS_PININPUTEN);
 
-        /* gpio 0, 1, and 4 are inputs */
-        au_writel(1 | (1<<1) | (1<<4), SYS_TRIOUTCLR);
+        /* GPIO 0, 1, and 4 are inputs */
+        au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR);
 
-        /* enable GPIO2 if not already enabled */
+        /* Enable GPIO2 if not already enabled */
         au_writel(1, GPIO2_ENABLE);
-        /* gpio2 208/9/10/11 are inputs */
-        au_writel((1<<8) | (1<<9) | (1<<10) | (1<<11), GPIO2_DIR);
+        /* GPIO2 208/9/10/11 are inputs */
+        au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR);
 
-        /* turn off power */
-        au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), GPIO2_OUTPUT);
+        /* Turn off power */
+        au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30),
+                  GPIO2_OUTPUT);
 #endif
 
-
 #ifdef CONFIG_PCI
 #if defined(__MIPSEB__)
-        au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+        au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
 #else
         au_writel(0xf, Au1500_PCI_CFG);
 #endif
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index 24fc6e132dc0..b849bf501c04 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -2,9 +2,8 @@
  * BRIEF MODULE DESCRIPTION
  *      XXS1500 board setup
  *
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -45,8 +44,8 @@ void __init prom_init(void)
         unsigned long memsize;
 
         prom_argc = fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg2;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg2;
 
         prom_init_cmdline();
 
@@ -54,6 +53,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = simple_strtol(memsize_str, NULL, 0);
+                memsize = strict_strtol(memsize_str, 0, NULL);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index dd6e3d1eb4d4..edf06ed11870 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -31,7 +31,7 @@
 #include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-        { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+        { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
         { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
         { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
         { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 117470b60e34..4b8799802788 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -1,67 +1,58 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:40 2007
+# Linux kernel version: 2.6.25
+# Sat May  3 00:38:11 2008
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-CONFIG_SIBYTE_SWARM=y
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+CONFIG_SIBYTE_SWARM=y
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_SIBYTE_SB1250=y
 CONFIG_SIBYTE_SB1xxx_SOC=y
-CONFIG_CPU_SB1_PASS_1=y
+# CONFIG_CPU_SB1_PASS_1 is not set
 # CONFIG_CPU_SB1_PASS_2_1250 is not set
-# CONFIG_CPU_SB1_PASS_2_2 is not set
+CONFIG_CPU_SB1_PASS_2_2=y
 # CONFIG_CPU_SB1_PASS_4 is not set
 # CONFIG_CPU_SB1_PASS_2_112x is not set
 # CONFIG_CPU_SB1_PASS_3 is not set
 CONFIG_SIBYTE_HAS_LDT=y
+CONFIG_SIBYTE_ENABLE_LDT_IF_PCI=y
 # CONFIG_SIMULATION is not set
 # CONFIG_SB1_CEX_ALWAYS_FATAL is not set
 # CONFIG_SB1_CERR_STALL is not set
@@ -69,20 +60,32 @@ CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
 # CONFIG_SIBYTE_TBPROF is not set
+CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_CEVT_SB1250=y
+CONFIG_CSRC_SB1250=y
+CONFIG_CFE=y
 CONFIG_DMA_COHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -90,6 +93,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -130,8 +134,7 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_SB1_PASS_1_WORKAROUNDS=y
+CONFIG_SB1_PASS_2_WORKAROUNDS=y
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -140,6 +143,7 @@ CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_SYS_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -147,13 +151,19 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_2=y
 CONFIG_NR_CPUS=2
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -166,38 +176,49 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=15
 CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
 CONFIG_CPUSETS=y
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_PROC_PID_CPUSET is not set
 CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -209,20 +230,29 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -230,12 +260,10 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -249,22 +277,19 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_ZONE_DMA32=y
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -272,7 +297,6 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
@@ -286,7 +310,6 @@ CONFIG_BINFMT_ELF32=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
 
 #
 # Networking
@@ -296,7 +319,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -304,6 +326,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -326,6 +349,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -333,24 +357,15 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -363,26 +378,52 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_RFKILL=m
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -391,34 +432,15 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -427,49 +449,77 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=9220
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_SGI_IOC4=m
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=y
 CONFIG_BLK_DEV_IDEFLOPPY=y
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDE_SWARM=y
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -477,89 +527,68 @@ CONFIG_BLK_DEV_IDE_SWARM=y
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -568,53 +597,70 @@ CONFIG_SB1250_MAC=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
+# CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -637,24 +683,8 @@ CONFIG_SERIO_RAW=m
 # Character devices
 #
 # CONFIG_VT is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -664,37 +694,22 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -702,109 +717,139 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Sound
 #
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
-# USB Gadget Support
+# Miscellaneous USB options
 #
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
 
 #
-# MMC/SD Card support
+# USB Host Controller Drivers
 #
-# CONFIG_MMC is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
-# LED devices
+# USB Device Class drivers
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
-# LED drivers
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# LED Triggers
+# may also be needed; see USB_STORAGE Help for more information
 #
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# InfiniBand support
+# USB Imaging devices
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB port drivers
 #
+# CONFIG_USB_SERIAL is not set
 
 #
-# Real Time Clock
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -823,15 +868,14 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -853,9 +897,9 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
 
 #
@@ -871,14 +915,13 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -890,6 +933,7 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -897,45 +941,29 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
 # CONFIG_DLM_DEBUG is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_SB1XXX_CORELIS is not set
@@ -946,13 +974,12 @@ CONFIG_SYS_SUPPORTS_KGDB=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -970,6 +997,11 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
@@ -983,15 +1015,16 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
@@ -999,10 +1032,15 @@ CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index af82e1a1823c..8dd3ae39bcad 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Wed Aug  8 16:11:47 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:54:51 2008
 #
 CONFIG_MIPS=y
 
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
@@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_HOTPLUG_CPU is not set
@@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 
 #
@@ -278,6 +308,7 @@ CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -285,15 +316,10 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -306,10 +332,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -317,6 +339,7 @@ CONFIG_NETWORK_SECMARK=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -339,6 +362,7 @@ CONFIG_FIB_RULES=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -360,10 +384,11 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -375,10 +400,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
@@ -394,6 +415,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=m
 
@@ -409,7 +431,8 @@ CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
@@ -420,6 +443,10 @@ CONFIG_MII=y
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -427,7 +454,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -439,6 +465,7 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -451,6 +478,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -472,6 +503,7 @@ CONFIG_VIA_VELOCITY=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -480,14 +512,12 @@ CONFIG_VIA_VELOCITY=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -506,7 +536,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -533,7 +562,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -552,52 +583,62 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 CONFIG_GPIO_TB0219=y
-# CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
@@ -616,6 +657,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -624,15 +666,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -665,10 +710,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -694,17 +735,11 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -729,9 +764,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -740,23 +776,6 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -771,20 +790,16 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -813,7 +828,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -828,24 +842,21 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -866,47 +877,38 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index a95385b24546..2ba240e897c6 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Thu Aug  9 11:16:55 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:53:54 2008
 #
 CONFIG_MIPS=y
 
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
@@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_HOTPLUG_CPU is not set
@@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 
 #
@@ -277,6 +307,7 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -284,15 +315,10 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -305,10 +331,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -316,6 +338,7 @@ CONFIG_NETWORK_SECMARK=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -338,6 +361,7 @@ CONFIG_FIB_RULES=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -359,10 +383,11 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -402,18 +427,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -428,6 +448,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -440,6 +461,10 @@ CONFIG_MII=y
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -447,7 +472,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
@@ -455,6 +479,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -470,6 +495,7 @@ CONFIG_E100=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -478,7 +504,6 @@ CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -486,7 +511,6 @@ CONFIG_USB_RTL8150=m
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -505,7 +529,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -532,7 +555,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -551,52 +576,62 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_GPIO_TB0219 is not set
-# CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
@@ -615,6 +650,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -623,15 +659,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -657,13 +696,16 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -676,10 +718,6 @@ CONFIG_USB_STORAGE=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -705,17 +743,11 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -740,9 +772,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -751,23 +784,6 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -782,14 +798,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -818,7 +831,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -833,24 +845,21 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -871,47 +880,38 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=m
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 40d4a40a970e..a5d0f3c55ed1 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Thu Aug  9 14:03:54 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:55:55 2008
 #
 CONFIG_MIPS=y
 
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
@@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_HOTPLUG_CPU is not set
@@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -156,12 +171,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -173,6 +191,8 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -185,10 +205,19 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -212,18 +241,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -237,6 +265,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 
 #
@@ -278,6 +307,7 @@ CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_ADVANCED=y
@@ -302,8 +332,6 @@ CONFIG_DEFAULT_BIC=y
 CONFIG_DEFAULT_TCP_CONG="bic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -320,10 +348,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -331,6 +355,7 @@ CONFIG_NETWORK_SECMARK=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -353,6 +378,7 @@ CONFIG_FIB_RULES=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -374,10 +400,11 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -416,10 +443,14 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -429,7 +460,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -458,7 +488,9 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
@@ -472,15 +504,9 @@ CONFIG_PATA_SIL680=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -520,6 +546,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -532,6 +559,10 @@ CONFIG_MII=y
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -539,7 +570,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -551,6 +581,7 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -563,6 +594,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -584,6 +619,7 @@ CONFIG_VIA_VELOCITY=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -592,7 +628,6 @@ CONFIG_VIA_VELOCITY=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -600,7 +635,6 @@ CONFIG_VIA_VELOCITY=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -622,7 +656,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -649,7 +682,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -668,49 +703,53 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_GPIO_TB0219 is not set
-# CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
@@ -719,9 +758,11 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
 CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
@@ -757,7 +798,14 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
 CONFIG_FB_SM501=y
+# CONFIG_FB_COBALT is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -787,6 +835,7 @@ CONFIG_FONT_8x16=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -807,6 +856,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -815,15 +865,18 @@ CONFIG_USB=m
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -849,13 +902,16 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -868,10 +924,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -896,36 +948,14 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -940,25 +970,21 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -987,7 +1013,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1002,24 +1027,21 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1040,47 +1062,38 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 82f9e9013e70..62bfb455d1b1 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -76,7 +76,9 @@ static void markeins_machine_power_off(void)
         while (1) ;
 }
 
-static unsigned long clock[4] = { 166500000, 187312500, 199800000, 210600000 };
+static unsigned long __initdata emma2rh_clock[4] = {
+        166500000, 187312500, 199800000, 210600000
+};
 
 static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
 {
@@ -85,7 +87,8 @@ static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
         /* detect from boot strap */
         reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0);
         reg = (reg >> 4) & 0x3;
-        return clock[reg];
+
+        return emma2rh_clock[reg];
 }
 
 void __init plat_time_init(void)
diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c
index 28dfd2e2989a..23066985a734 100644
--- a/arch/mips/fw/arc/identify.c
+++ b/arch/mips/fw/arc/identify.c
@@ -67,6 +67,11 @@ static struct smatch mach_table[] = {
                 .liname         = "SNI RM200_PCI",
                 .type           = MACH_SNI_RM200_PCI,
                 .flags          = PROM_FLAG_DONT_FREE_TEMP,
+        }, {
+                .arcname        = "RM200PCI-R5K",
+                .liname         = "SNI RM200_PCI-R5K",
+                .type           = MACH_SNI_RM200_PCI,
+                .flags          = PROM_FLAG_DONT_FREE_TEMP,
         }
 };
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 45545be3eb86..65e46a6d4178 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_CPU_LOONGSON2)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_MIPS32)        += r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_MIPS64)        += r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R3000)         += r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_R4000)         += r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R4300)         += r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R4X00)         += r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R5000)         += r4k_fpu.o r4k_switch.o
@@ -56,9 +55,9 @@ obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 obj-$(CONFIG_MIPS_CMP)          += smp-cmp.o
 obj-$(CONFIG_CPU_MIPSR2)        += spram.o
 
-obj-$(CONFIG_MIPS_APSP_KSPD)    += kspd.o
 obj-$(CONFIG_MIPS_VPE_LOADER)   += vpe.o
 obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
+obj-$(CONFIG_MIPS_APSP_KSPD)    += kspd.o
 
 obj-$(CONFIG_I8259)             += i8259.o
 obj-$(CONFIG_IRQ_CPU)           += irq_cpu.o
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index a1b48af0992f..02b7713cf71c 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -38,7 +38,7 @@ static inline void align_mod(const int align, const int mod)
                 ".endr\n\t"
                 ".set   pop"
                 :
-                : GCC_IMM_ASM(align), GCC_IMM_ASM(mod));
+                : GCC_IMM_ASM() (align), GCC_IMM_ASM() (mod));
 }
 
 static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
diff --git a/arch/mips/kernel/init_task.c b/arch/mips/kernel/init_task.c
index aeda7f58391b..d72487ad7c15 100644
--- a/arch/mips/kernel/init_task.c
+++ b/arch/mips/kernel/init_task.c
@@ -10,7 +10,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
index 290d8e3a664d..469c7237e5ba 100644
--- a/arch/mips/kernel/irixelf.c
+++ b/arch/mips/kernel/irixelf.c
@@ -578,7 +578,7 @@ static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp,
  * process and the system, here we map the page and fill the
  * structure
  */
-static void irix_map_prda_page(void)
+static int irix_map_prda_page(void)
 {
         unsigned long v;
         struct prda *pp;
@@ -587,8 +587,8 @@ static void irix_map_prda_page(void)
         v =  do_brk(PRDA_ADDRESS, PAGE_SIZE);
         up_write(&current->mm->mmap_sem);
 
-        if (v < 0)
-                return;
+        if (v != PRDA_ADDRESS)
+                return v;               /* v must be an error code */
 
         pp = (struct prda *) v;
         pp->prda_sys.t_pid  = task_pid_vnr(current);
@@ -596,6 +596,8 @@ static void irix_map_prda_page(void)
         pp->prda_sys.t_rpid = task_pid_vnr(current);
 
         /* We leave the rest set to zero */
+
+        return 0;
 }
 
 
@@ -781,7 +783,8 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
          * IRIX maps a page at 0x200000 which holds some system
          * information.  Programs depend on this.
          */
-        irix_map_prda_page();
+        if (irix_map_prda_page())
+                goto out_free_dentry;
 
         padzero(elf_bss);
 
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index ceb62dce1c9c..b0591ae0ce56 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -257,7 +257,7 @@ void sp_work_handle_request(void)
 
                 vcwd = vpe_getcwd(tclimit);
 
-                /* change to the cwd of the process that loaded the SP program */
+                /* change to cwd of the process that loaded the SP program */
                 old_fs = get_fs();
                 set_fs(KERNEL_DS);
                 sys_chdir(vcwd);
@@ -323,6 +323,9 @@ static void sp_cleanup(void)
                         set >>= 1;
                 }
         }
+
+        /* Put daemon cwd back to root to avoid umount problems */
+        sys_chdir("/");
 }
 
 static int channel_open = 0;
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 0233798f7155..b88f1c18ff4d 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -72,6 +72,15 @@ static void rtlx_dispatch(void)
 static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
 {
         int i;
+        unsigned int flags, vpeflags;
+
+        /* Ought not to be strictly necessary for SMTC builds */
+        local_irq_save(flags);
+        vpeflags = dvpe();
+        set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ);
+        irq_enable_hazard();
+        evpe(vpeflags);
+        local_irq_restore(flags);
 
         for (i = 0; i < RTLX_CHANNELS; i++) {
                         wake_up(&channel_wqs[i].lx_queue);
@@ -108,7 +117,8 @@ static void __used dump_rtlx(void)
 static int rtlx_init(struct rtlx_info *rtlxi)
 {
         if (rtlxi->id != RTLX_ID) {
-                printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id);
+                printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n",
+                        rtlxi, rtlxi->id);
                 return -ENOEXEC;
         }
 
@@ -162,18 +172,17 @@ int rtlx_open(int index, int can_sleep)
 
         if (rtlx == NULL) {
                 if( (p = vpe_get_shared(tclimit)) == NULL) {
-                        if (can_sleep) {
-                                __wait_event_interruptible(channel_wqs[index].lx_queue,
-                                                           (p = vpe_get_shared(tclimit)),
-                                                           ret);
-                                if (ret)
-                                        goto out_fail;
-                        } else {
-                                printk(KERN_DEBUG "No SP program loaded, and device "
-                                        "opened with O_NONBLOCK\n");
-                                ret = -ENOSYS;
+                    if (can_sleep) {
+                        __wait_event_interruptible(channel_wqs[index].lx_queue,
+                                (p = vpe_get_shared(tclimit)), ret);
+                        if (ret)
                                 goto out_fail;
-                        }
+                    } else {
+                        printk(KERN_DEBUG "No SP program loaded, and device "
+                                        "opened with O_NONBLOCK\n");
+                        ret = -ENOSYS;
+                        goto out_fail;
+                    }
                 }
 
                 smp_rmb();
@@ -182,7 +191,9 @@ int rtlx_open(int index, int can_sleep)
                                 DEFINE_WAIT(wait);
 
                                 for (;;) {
-                                        prepare_to_wait(&channel_wqs[index].lx_queue, &wait, TASK_INTERRUPTIBLE);
+                                        prepare_to_wait(
+                                                &channel_wqs[index].lx_queue,
+                                                &wait, TASK_INTERRUPTIBLE);
                                         smp_rmb();
                                         if (*p != NULL)
                                                 break;
@@ -195,7 +206,7 @@ int rtlx_open(int index, int can_sleep)
                                 }
                                 finish_wait(&channel_wqs[index].lx_queue, &wait);
                         } else {
-                                printk(" *vpe_get_shared is NULL. "
+                                pr_err(" *vpe_get_shared is NULL. "
                                        "Has an SP program been loaded?\n");
                                 ret = -ENOSYS;
                                 goto out_fail;
@@ -203,8 +214,9 @@ int rtlx_open(int index, int can_sleep)
                 }
 
                 if ((unsigned int)*p < KSEG0) {
-                        printk(KERN_WARNING "vpe_get_shared returned an invalid pointer "
-                               "maybe an error code %d\n", (int)*p);
+                        printk(KERN_WARNING "vpe_get_shared returned an "
+                               "invalid pointer maybe an error code %d\n",
+                               (int)*p);
                         ret = -ENOSYS;
                         goto out_fail;
                 }
@@ -232,6 +244,10 @@ out_ret:
 
 int rtlx_release(int index)
 {
+        if (rtlx == NULL) {
+                pr_err("rtlx_release() with null rtlx\n");
+                return 0;
+        }
         rtlx->channel[index].lx_state = RTLX_STATE_UNUSED;
         return 0;
 }
@@ -251,8 +267,8 @@ unsigned int rtlx_read_poll(int index, int can_sleep)
                         int ret = 0;
 
                         __wait_event_interruptible(channel_wqs[index].lx_queue,
-                                                   chan->lx_read != chan->lx_write || sp_stopping,
-                                                   ret);
+                                (chan->lx_read != chan->lx_write) ||
+                                sp_stopping, ret);
                         if (ret)
                                 return ret;
 
@@ -282,7 +298,9 @@ static inline int write_spacefree(int read, int write, int size)
 unsigned int rtlx_write_poll(int index)
 {
         struct rtlx_channel *chan = &rtlx->channel[index];
-        return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size);
+
+        return write_spacefree(chan->rt_read, chan->rt_write,
+                                chan->buffer_size);
 }
 
 ssize_t rtlx_read(int index, void __user *buff, size_t count)
@@ -344,8 +362,8 @@ ssize_t rtlx_write(int index, const void __user *buffer, size_t count)
         rt_read = rt->rt_read;
 
         /* total number of bytes to copy */
-        count = min(count,
-                    (size_t)write_spacefree(rt_read, rt->rt_write, rt->buffer_size));
+        count = min(count, (size_t)write_spacefree(rt_read, rt->rt_write,
+                                                        rt->buffer_size));
 
         /* first bit from write pointer to the end of the buffer, or count */
         fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
@@ -514,6 +532,11 @@ static int __init rtlx_module_init(void)
 
         if (cpu_has_vint)
                 set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+        else {
+                pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
+                err = -ENODEV;
+                goto out_chrdev;
+        }
 
         rtlx_irq.dev_id = rtlx;
         setup_irq(rtlx_irq_num, &rtlx_irq);
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 39f3dfe134fb..c6a063b2a0d9 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -331,6 +331,7 @@ static void __init bootmem_init(void)
         /*
          * Determine low and high memory ranges
          */
+        max_pfn = max_low_pfn;
         if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) {
 #ifdef CONFIG_HIGHMEM
                 highstart_pfn = PFN_DOWN(HIGHMEM_START);
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 33780cc61ce9..cdf87a9dd4ba 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -87,8 +87,8 @@ struct plat_smp_ops *mp_ops;
 
 __cpuinit void register_smp_ops(struct plat_smp_ops *ops)
 {
-        if (ops)
-                printk(KERN_WARNING "Overriding previous set SMP ops\n");
+        if (mp_ops)
+                printk(KERN_WARNING "Overriding previously set SMP ops\n");
 
         mp_ops = ops;
 }
@@ -216,6 +216,7 @@ int smp_call_function(void (*func) (void *info), void *info, int retry,
 {
         return smp_call_function_mask(cpu_online_map, func, info, retry, wait);
 }
+EXPORT_SYMBOL(smp_call_function);
 
 void smp_call_function_interrupt(void)
 {
@@ -271,6 +272,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
         put_cpu();
         return 0;
 }
+EXPORT_SYMBOL(smp_call_function_single);
 
 static void stop_this_cpu(void *dummy)
 {
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cb8b0e2c7954..f9165d1a17bf 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -88,15 +88,17 @@ static void show_raw_backtrace(unsigned long reg29)
 #ifdef CONFIG_KALLSYMS
         printk("\n");
 #endif
-#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000)
-        if (IS_KVA01(sp)) {
-                while (!kstack_end(sp)) {
-                        addr = *sp++;
-                        if (__kernel_text_address(addr))
-                                print_ip_sym(addr);
+        while (!kstack_end(sp)) {
+                unsigned long __user *p =
+                        (unsigned long __user *)(unsigned long)sp++;
+                if (__get_user(addr, p)) {
+                        printk(" (Bad stack address)");
+                        break;
                 }
-                printk("\n");
+                if (__kernel_text_address(addr))
+                        print_ip_sym(addr);
         }
+        printk("\n");
 }
 
 #ifdef CONFIG_KALLSYMS
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 39804c584edd..2794501ff302 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -269,7 +269,7 @@ static void *alloc_progmem(unsigned long len)
          * This means you must tell Linux to use less memory than you
          * physically have, for example by passing a mem= boot argument.
          */
-        addr = pfn_to_kaddr(max_pfn);
+        addr = pfn_to_kaddr(max_low_pfn);
         memset(addr, 0, len);
 #else
         /* simple grab some mem for now */
@@ -781,10 +781,15 @@ static int vpe_run(struct vpe * v)
         /* take system out of configuration state */
         clear_c0_mvpcontrol(MVPCONTROL_VPC);
 
+        /*
+         * SMTC/SMVP kernels manage VPE enable independently,
+         * but uniprocessor kernels need to turn it on, even
+         * if that wasn't the pre-dvpe() state.
+         */
 #ifdef CONFIG_SMP
-        evpe(EVPE_ENABLE);
-#else
         evpe(vpeflags);
+#else
+        evpe(EVPE_ENABLE);
 #endif
         emt(dmt_flag);
         local_irq_restore(flags);
@@ -840,7 +845,7 @@ static int vpe_elfload(struct vpe * v)
 
         /* Sanity checks against insmoding binaries or wrong arch,
            weird elf version */
-        if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+        if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
             || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
             || !elf_check_arch(hdr)
             || hdr->e_shentsize != sizeof(*sechdrs)) {
@@ -947,12 +952,14 @@ static int vpe_elfload(struct vpe * v)
                 struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
 
                 for (i = 0; i < hdr->e_phnum; i++) {
-                        if (phdr->p_type != PT_LOAD)
-                                continue;
-
-                        memcpy((void *)phdr->p_paddr, (char *)hdr + phdr->p_offset, phdr->p_filesz);
-                        memset((void *)phdr->p_paddr + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz);
-                        phdr++;
+                        if (phdr->p_type == PT_LOAD) {
+                                memcpy((void *)phdr->p_paddr,
+                                       (char *)hdr + phdr->p_offset,
+                                       phdr->p_filesz);
+                                memset((void *)phdr->p_paddr + phdr->p_filesz,
+                                       0, phdr->p_memsz - phdr->p_filesz);
+                    }
+                    phdr++;
                 }
 
                 for (i = 0; i < hdr->e_shnum; i++) {
@@ -1107,7 +1114,7 @@ static int vpe_release(struct inode *inode, struct file *filp)
                 return -ENODEV;
 
         hdr = (Elf_Ehdr *) v->pbuffer;
-        if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
+        if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
                 if (vpe_elfload(v) >= 0) {
                         vpe_run(v);
                 } else {
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index cfeab669782f..a56c15026965 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -34,11 +34,13 @@ static volatile int lasat_int_mask_shift;
 
 void disable_lasat_irq(unsigned int irq_nr)
 {
+        irq_nr -= LASAT_IRQ_BASE;
         *lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
 }
 
 void enable_lasat_irq(unsigned int irq_nr)
 {
+        irq_nr -= LASAT_IRQ_BASE;
         *lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
 }
 
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
index ec2f658c3709..31e328b3814d 100644
--- a/arch/mips/lasat/lasat_board.c
+++ b/arch/mips/lasat/lasat_board.c
@@ -23,18 +23,19 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/ctype.h>
+#include <linux/mutex.h>
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 #include "at93c.h"
 /* New model description table */
 #include "lasat_models.h"
 
+static DEFINE_MUTEX(lasat_eeprom_mutex);
+
 #define EEPROM_CRC(data, len) (~crc32(~0, data, len))
 
 struct lasat_info lasat_board_info;
 
-void update_bcastaddr(void);
-
 int EEPROMRead(unsigned int pos, unsigned char *data, int len)
 {
         int i;
@@ -258,10 +259,6 @@ int lasat_init_board_info(void)
                         sprintf(lasat_board_info.li_typestr, "%d", 10 * c);
         }
 
-#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL)
-        update_bcastaddr();
-#endif
-
         return 0;
 }
 
@@ -269,6 +266,8 @@ void lasat_write_eeprom_info(void)
 {
         unsigned long crc;
 
+        mutex_lock(&lasat_eeprom_mutex);
+
         /* Generate the CRC */
         crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
                     sizeof(struct lasat_eeprom_struct) - 4);
@@ -277,4 +276,6 @@ void lasat_write_eeprom_info(void)
         /* Write the EEPROM info */
         EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
                     sizeof(struct lasat_eeprom_struct));
+
+        mutex_unlock(&lasat_eeprom_mutex);
 }
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index 389336c4ecc5..866881ec0cf8 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -29,15 +29,13 @@
 #include <linux/string.h>
 #include <linux/net.h>
 #include <linux/inet.h>
-#include <linux/mutex.h>
 #include <linux/uaccess.h>
 
 #include <asm/time.h>
 
-#include "sysctl.h"
+#ifdef CONFIG_DS1603
 #include "ds1603.h"
-
-static DEFINE_MUTEX(lasat_info_mutex);
+#endif
 
 /* Strategy function to write EEPROM after changing string entry */
 int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
@@ -46,18 +44,15 @@ int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
 {
         int r;
 
-        mutex_lock(&lasat_info_mutex);
         r = sysctl_string(table, name,
                           nlen, oldval, oldlenp, newval, newlen);
-        if (r < 0) {
-                mutex_unlock(&lasat_info_mutex);
+        if (r < 0)
                 return r;
-        }
+
         if (newval && newlen)
                 lasat_write_eeprom_info();
-        mutex_unlock(&lasat_info_mutex);
 
-        return 1;
+        return 0;
 }
 
 
@@ -67,14 +62,11 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp,
 {
         int r;
 
-        mutex_lock(&lasat_info_mutex);
         r = proc_dostring(table, write, filp, buffer, lenp, ppos);
-        if ((!write) || r) {
-                mutex_unlock(&lasat_info_mutex);
+        if ((!write) || r)
                 return r;
-        }
+
         lasat_write_eeprom_info();
-        mutex_unlock(&lasat_info_mutex);
 
         return 0;
 }
@@ -85,28 +77,24 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp,
 {
         int r;
 
-        mutex_lock(&lasat_info_mutex);
         r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
-        if ((!write) || r) {
-                mutex_unlock(&lasat_info_mutex);
+        if ((!write) || r)
                 return r;
-        }
+
         lasat_write_eeprom_info();
-        mutex_unlock(&lasat_info_mutex);
 
         return 0;
 }
 
+#ifdef CONFIG_DS1603
 static int rtctmp;
 
-#ifdef CONFIG_DS1603
 /* proc function to read/write RealTime Clock */
 int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
                        void *buffer, size_t *lenp, loff_t *ppos)
 {
         int r;
 
-        mutex_lock(&lasat_info_mutex);
         if (!write) {
                 rtctmp = read_persistent_clock();
                 /* check for time < 0 and set to 0 */
@@ -114,12 +102,11 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
                         rtctmp = 0;
         }
         r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
-        if ((!write) || r) {
-                mutex_unlock(&lasat_info_mutex);
+        if (r)
                 return r;
-        }
-        rtc_mips_set_mmss(rtctmp);
-        mutex_unlock(&lasat_info_mutex);
+
+        if (write)
+                rtc_mips_set_mmss(rtctmp);
 
         return 0;
 }
@@ -132,17 +119,14 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen,
 {
         int r;
 
-        mutex_lock(&lasat_info_mutex);
         r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
-        if (r < 0) {
-                mutex_unlock(&lasat_info_mutex);
+        if (r < 0)
                 return r;
-        }
+
         if (newval && newlen)
                 lasat_write_eeprom_info();
-        mutex_unlock(&lasat_info_mutex);
 
-        return 1;
+        return 0;
 }
 
 #ifdef CONFIG_DS1603
@@ -153,50 +137,27 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
 {
         int r;
 
-        mutex_lock(&lasat_info_mutex);
         rtctmp = read_persistent_clock();
         if (rtctmp < 0)
                 rtctmp = 0;
         r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
-        if (r < 0) {
-                mutex_unlock(&lasat_info_mutex);
+        if (r < 0)
                 return r;
-        }
         if (newval && newlen)
                 rtc_mips_set_mmss(rtctmp);
-        mutex_unlock(&lasat_info_mutex);
 
-        return 1;
+        return r;
 }
 #endif
 
 #ifdef CONFIG_INET
-static char lasat_bcastaddr[16];
-
-void update_bcastaddr(void)
-{
-        unsigned int ip;
-
-        ip = (lasat_board_info.li_eeprom_info.ipaddr &
-                lasat_board_info.li_eeprom_info.netmask) |
-                ~lasat_board_info.li_eeprom_info.netmask;
-
-        sprintf(lasat_bcastaddr, "%d.%d.%d.%d",
-                        (ip)       & 0xff,
-                        (ip >>  8) & 0xff,
-                        (ip >> 16) & 0xff,
-                        (ip >> 24) & 0xff);
-}
-
-static char proc_lasat_ipbuf[32];
-
-/* Parsing of IP address */
 int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
                        void *buffer, size_t *lenp, loff_t *ppos)
 {
         unsigned int ip;
         char *p, c;
         int len;
+        char ipbuf[32];
 
         if (!table->data || !table->maxlen || !*lenp ||
             (*ppos && !write)) {
@@ -204,117 +165,88 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
                 return 0;
         }
 
-        mutex_lock(&lasat_info_mutex);
         if (write) {
                 len = 0;
                 p = buffer;
                 while (len < *lenp) {
-                        if (get_user(c, p++)) {
-                                mutex_unlock(&lasat_info_mutex);
+                        if (get_user(c, p++))
                                 return -EFAULT;
-                        }
                         if (c == 0 || c == '\n')
                                 break;
                         len++;
                 }
-                if (len >= sizeof(proc_lasat_ipbuf)-1)
-                        len = sizeof(proc_lasat_ipbuf) - 1;
-                if (copy_from_user(proc_lasat_ipbuf, buffer, len)) {
-                        mutex_unlock(&lasat_info_mutex);
+                if (len >= sizeof(ipbuf)-1)
+                        len = sizeof(ipbuf) - 1;
+                if (copy_from_user(ipbuf, buffer, len))
                         return -EFAULT;
-                }
-                proc_lasat_ipbuf[len] = 0;
+                ipbuf[len] = 0;
                 *ppos += *lenp;
                 /* Now see if we can convert it to a valid IP */
-                ip = in_aton(proc_lasat_ipbuf);
+                ip = in_aton(ipbuf);
                 *(unsigned int *)(table->data) = ip;
                 lasat_write_eeprom_info();
         } else {
                 ip = *(unsigned int *)(table->data);
-                sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d",
+                sprintf(ipbuf, "%d.%d.%d.%d",
                         (ip)       & 0xff,
                         (ip >>  8) & 0xff,
                         (ip >> 16) & 0xff,
                         (ip >> 24) & 0xff);
-                len = strlen(proc_lasat_ipbuf);
+                len = strlen(ipbuf);
                 if (len > *lenp)
                         len = *lenp;
                 if (len)
-                        if (copy_to_user(buffer, proc_lasat_ipbuf, len)) {
-                                mutex_unlock(&lasat_info_mutex);
+                        if (copy_to_user(buffer, ipbuf, len))
                                 return -EFAULT;
-                        }
                 if (len < *lenp) {
-                        if (put_user('\n', ((char *) buffer) + len)) {
-                                mutex_unlock(&lasat_info_mutex);
+                        if (put_user('\n', ((char *) buffer) + len))
                                 return -EFAULT;
-                        }
                         len++;
                 }
                 *lenp = len;
                 *ppos += len;
         }
-        update_bcastaddr();
-        mutex_unlock(&lasat_info_mutex);
 
         return 0;
 }
-#endif /* defined(CONFIG_INET) */
+#endif
 
-static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen,
+static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen,
                                      void *oldval, size_t *oldlenp,
                                      void *newval, size_t newlen)
 {
         int r;
 
-        mutex_lock(&lasat_info_mutex);
         r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
-        if (r < 0) {
-                mutex_unlock(&lasat_info_mutex);
+        if (r < 0)
                 return r;
-        }
-
         if (newval && newlen) {
-                if (name && *name == LASAT_PRID)
-                        lasat_board_info.li_eeprom_info.prid = *(int *)newval;
-
+                lasat_board_info.li_eeprom_info.prid = *(int *)newval;
                 lasat_write_eeprom_info();
                 lasat_init_board_info();
         }
-        mutex_unlock(&lasat_info_mutex);
-
         return 0;
 }
 
-int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp,
+int proc_lasat_prid(ctl_table *table, int write, struct file *filp,
                        void *buffer, size_t *lenp, loff_t *ppos)
 {
         int r;
 
-        mutex_lock(&lasat_info_mutex);
         r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
-        if ((!write) || r) {
-                mutex_unlock(&lasat_info_mutex);
+        if (r < 0)
                 return r;
+        if (write) {
+                lasat_board_info.li_eeprom_info.prid =
+                        lasat_board_info.li_prid;
+                lasat_write_eeprom_info();
+                lasat_init_board_info();
         }
-        if (filp && filp->f_path.dentry) {
-                if (!strcmp(filp->f_path.dentry->d_name.name, "prid"))
-                        lasat_board_info.li_eeprom_info.prid =
-                                lasat_board_info.li_prid;
-                if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess"))
-                        lasat_board_info.li_eeprom_info.debugaccess =
-                                lasat_board_info.li_debugaccess;
-        }
-        lasat_write_eeprom_info();
-        mutex_unlock(&lasat_info_mutex);
-
         return 0;
 }
 
 extern int lasat_boot_to_service;
 
-#ifdef CONFIG_SYSCTL
-
 static ctl_table lasat_table[] = {
         {
                 .ctl_name       = CTL_UNNUMBERED,
@@ -349,8 +281,8 @@ static ctl_table lasat_table[] = {
                 .data           = &lasat_board_info.li_prid,
                 .maxlen         = sizeof(int),
                 .mode           = 0644,
-                .proc_handler   = &proc_lasat_eeprom_value,
-                .strategy       = &sysctl_lasat_eeprom_value
+                .proc_handler   = &proc_lasat_prid,
+                .strategy       = &sysctl_lasat_prid
         },
 #ifdef CONFIG_INET
         {
@@ -363,7 +295,7 @@ static ctl_table lasat_table[] = {
                 .strategy       = &sysctl_lasat_intvec
         },
         {
-                .ctl_name       = LASAT_NETMASK,
+                .ctl_name       = CTL_UNNUMBERED,
                 .procname       = "netmask",
                 .data           = &lasat_board_info.li_eeprom_info.netmask,
                 .maxlen         = sizeof(int),
@@ -371,15 +303,6 @@ static ctl_table lasat_table[] = {
                 .proc_handler   = &proc_lasat_ip,
                 .strategy       = &sysctl_lasat_intvec
         },
-        {
-                .ctl_name       = CTL_UNNUMBERED,
-                .procname       = "bcastaddr",
-                .data           = &lasat_bcastaddr,
-                .maxlen         = sizeof(lasat_bcastaddr),
-                .mode           = 0600,
-                .proc_handler   = &proc_dostring,
-                .strategy       = &sysctl_string
-        },
 #endif
         {
                 .ctl_name       = CTL_UNNUMBERED,
@@ -417,7 +340,7 @@ static ctl_table lasat_table[] = {
                 .data           = &lasat_board_info.li_namestr,
                 .maxlen         = sizeof(lasat_board_info.li_namestr),
                 .mode           = 0444,
-                .proc_handler   =  &proc_dostring,
+                .proc_handler   = &proc_dostring,
                 .strategy       = &sysctl_string
         },
         {
@@ -448,9 +371,12 @@ static int __init lasat_register_sysctl(void)
 
         lasat_table_header =
                 register_sysctl_table(lasat_root_table);
+        if (!lasat_table_header) {
+                printk(KERN_ERR "Unable to register LASAT sysctl\n");
+                return -ENOMEM;
+        }
 
         return 0;
 }
 
 __initcall(lasat_register_sysctl);
-#endif /* CONFIG_SYSCTL */
diff --git a/arch/mips/lasat/sysctl.h b/arch/mips/lasat/sysctl.h
deleted file mode 100644
index 341b97933423..000000000000
--- a/arch/mips/lasat/sysctl.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * LASAT sysctl values
- */
-
-#ifndef _LASAT_SYSCTL_H
-#define _LASAT_SYSCTL_H
-
-/* /proc/sys/lasat */
-enum {
-        LASAT_CPU_HZ = 1,
-        LASAT_BUS_HZ,
-        LASAT_MODEL,
-        LASAT_PRID,
-        LASAT_IPADDR,
-        LASAT_NETMASK,
-        LASAT_BCAST,
-        LASAT_PASSWORD,
-        LASAT_SBOOT,
-        LASAT_RTC,
-        LASAT_NAMESTR,
-        LASAT_TYPESTR,
-};
-
-#endif /* _LASAT_SYSCTL_H */
diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c
index b7633fda4180..96236bf33838 100644
--- a/arch/mips/mips-boards/generic/amon.c
+++ b/arch/mips/mips-boards/generic/amon.c
@@ -28,7 +28,7 @@
 
 int amon_cpu_avail(int cpu)
 {
-        struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH);
+        struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
 
         if (cpu < 0 || cpu >= NCPULAUNCH) {
                 pr_debug("avail: cpu%d is out of range\n", cpu);
@@ -53,7 +53,7 @@ void amon_cpu_start(int cpu,
                     unsigned long gp, unsigned long a0)
 {
         volatile struct cpulaunch *launch =
-                (struct cpulaunch  *)KSEG0ADDR(CPULAUNCH);
+                (struct cpulaunch  *)CKSEG0ADDR(CPULAUNCH);
 
         if (!amon_cpu_avail(cpu))
                 return;
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 008fd82b5840..fe2cac1b4514 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -58,27 +58,8 @@ static int mips_cpu_timer_irq;
 static int mips_cpu_perf_irq;
 extern int cp0_perfcount_irq;
 
-DEFINE_PER_CPU(unsigned int, tickcount);
-#define tickcount_this_cpu __get_cpu_var(tickcount)
-static unsigned long ledbitmask;
-
 static void mips_timer_dispatch(void)
 {
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS)
-        /*
-         * Yes, this is very tacky, won't work as expected with SMTC and
-         * dyntick will break it,
-         * but it gives me a nice warm feeling during debug
-         */
-#define LEDBAR 0xbf000408
-        if (tickcount_this_cpu++ >= HZ) {
-                tickcount_this_cpu = 0;
-                change_bit(smp_processor_id(), &ledbitmask);
-                smp_wmb(); /* Make sure every one else sees the change */
-                /* This will pick up any recent changes made by other CPU's */
-                *(unsigned int *)LEDBAR = ledbitmask;
-        }
-#endif
         do_IRQ(mips_cpu_timer_irq);
 }
 
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
index 8dc6e2ac4c03..db4ad654a6d3 100644
--- a/arch/mips/mips-boards/malta/Makefile
+++ b/arch/mips/mips-boards/malta/Makefile
@@ -19,9 +19,8 @@
 # under Linux.
 #
 
-obj-y := malta_int.o malta_platform.o malta_setup.o
+obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o
 
-obj-$(CONFIG_MTD) += malta_mtd.o
 # FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
 
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 643c8bcffff3..27096751ddce 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -446,6 +446,7 @@ static inline void local_r4k_flush_cache_page(void *args)
         struct page *page = pfn_to_page(fcp_args->pfn);
         int exec = vma->vm_flags & VM_EXEC;
         struct mm_struct *mm = vma->vm_mm;
+        int map_coherent = 0;
         pgd_t *pgdp;
         pud_t *pudp;
         pmd_t *pmdp;
@@ -479,7 +480,9 @@ static inline void local_r4k_flush_cache_page(void *args)
                  * Use kmap_coherent or kmap_atomic to do flushes for
                  * another ASID than the current one.
                  */
-                if (cpu_has_dc_aliases)
+                map_coherent = (cpu_has_dc_aliases &&
+                                page_mapped(page) && !Page_dcache_dirty(page));
+                if (map_coherent)
                         vaddr = kmap_coherent(page, addr);
                 else
                         vaddr = kmap_atomic(page, KM_USER0);
@@ -502,7 +505,7 @@ static inline void local_r4k_flush_cache_page(void *args)
         }
 
         if (vaddr) {
-                if (cpu_has_dc_aliases)
+                if (map_coherent)
                         kunmap_coherent();
                 else
                         kunmap_atomic(vaddr, KM_USER0);
@@ -1226,6 +1229,28 @@ void au1x00_fixup_config_od(void)
         }
 }
 
+/* CP0 hazard avoidance. */
+#define NXP_BARRIER()                                                   \
+         __asm__ __volatile__(                                          \
+        ".set noreorder\n\t"                                            \
+        "nop; nop; nop; nop; nop; nop;\n\t"                             \
+        ".set reorder\n\t")
+
+static void nxp_pr4450_fixup_config(void)
+{
+        unsigned long config0;
+
+        config0 = read_c0_config();
+
+        /* clear all three cache coherency fields */
+        config0 &= ~(0x7 | (7 << 25) | (7 << 28));
+        config0 |= (((_page_cachable_default >> _CACHE_SHIFT) <<  0) |
+                    ((_page_cachable_default >> _CACHE_SHIFT) << 25) |
+                    ((_page_cachable_default >> _CACHE_SHIFT) << 28));
+        write_c0_config(config0);
+        NXP_BARRIER();
+}
+
 static int __cpuinitdata cca = -1;
 
 static int __init cca_setup(char *str)
@@ -1271,6 +1296,10 @@ static void __cpuinit coherency_setup(void)
         case CPU_AU1500: /* rev. AB */
                 au1x00_fixup_config_od();
                 break;
+
+        case PRID_IMP_PR4450:
+                nxp_pr4450_fixup_config();
+                break;
         }
 }
 
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 10dd2af2343b..8f2cd8eda741 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -116,4 +116,3 @@ EXPORT_SYMBOL(__kmap);
 EXPORT_SYMBOL(__kunmap);
 EXPORT_SYMBOL(__kmap_atomic);
 EXPORT_SYMBOL(__kunmap_atomic);
-EXPORT_SYMBOL(__kmap_atomic_to_page);
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index ecd562d2c348..137c14bafd6b 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -71,6 +71,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
  * don't have to care about aliases on other CPUs.
  */
 unsigned long empty_zero_page, zero_page_mask;
+EXPORT_SYMBOL_GPL(empty_zero_page);
 
 /*
  * Not static inline because used by IP27 special magic initialization code
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index d827d6144369..1edf0cbbeede 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -310,8 +310,8 @@ void __cpuinit build_clear_page(void)
         if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
                 uasm_i_lui(&buf, AT, 0xa000);
 
-        off = min(8, pref_bias_clear_store / cache_line_size) *
-              cache_line_size;
+        off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size)
+                                * cache_line_size : 0;
         while (off) {
                 build_clear_pref(&buf, -off);
                 off -= cache_line_size;
@@ -454,12 +454,14 @@ void __cpuinit build_copy_page(void)
         if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
                 uasm_i_lui(&buf, AT, 0xa000);
 
-        off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size;
+        off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+                                cache_line_size : 0;
         while (off) {
                 build_copy_load_pref(&buf, -off);
                 off -= cache_line_size;
         }
-        off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size;
+        off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) *
+                                cache_line_size : 0;
         while (off) {
                 build_copy_store_pref(&buf, -off);
                 off -= cache_line_size;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 382738ca8a0b..76da73a5ab3c 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -224,8 +224,9 @@ static u32 final_handler[64] __cpuinitdata;
 static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)
 {
         switch (current_cpu_type()) {
-        /* Found by experiment: R4600 v2.0 needs this, too.  */
+        /* Found by experiment: R4600 v2.0/R4700 needs this, too.  */
         case CPU_R4600:
+        case CPU_R4700:
         case CPU_R5000:
         case CPU_R5000A:
         case CPU_NEVADA:
diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/nxp/pnx8550/jbs/board_setup.c
index f92826e0096d..57dd903ca408 100644
--- a/arch/mips/nxp/pnx8550/jbs/board_setup.c
+++ b/arch/mips/nxp/pnx8550/jbs/board_setup.c
@@ -47,16 +47,7 @@
 
 void __init board_setup(void)
 {
-        unsigned long config0, configpr;
-
-        config0 = read_c0_config();
-
-        /* clear all three cache coherency fields */
-        config0 &= ~(0x7 | (7<<25) | (7<<28));
-        config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
-                        (CONF_CM_DEFAULT<<28));
-        write_c0_config(config0);
-        BARRIER;
+        unsigned long configpr;
 
         configpr = read_c0_config7();
         configpr |= (1<<19); /* enable tlb */
diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/nxp/pnx8550/stb810/board_setup.c
index 1282c27cfcb7..af2a55e0b4e9 100644
--- a/arch/mips/nxp/pnx8550/stb810/board_setup.c
+++ b/arch/mips/nxp/pnx8550/stb810/board_setup.c
@@ -33,15 +33,7 @@
 
 void __init board_setup(void)
 {
-        unsigned long config0, configpr;
-
-        config0 = read_c0_config();
-
-        /* clear all three cache coherency fields */
-        config0 &= ~(0x7 | (7<<25) | (7<<28));
-        config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
-                        (CONF_CM_DEFAULT<<28));
-        write_c0_config(config0);
+        unsigned long configpr;
 
         configpr = read_c0_config7();
         configpr |= (1<<19); /* enable tlb */
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index da8cbb6899dc..b40df7d2cf44 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -281,7 +281,7 @@ static inline int n_counters(void)
 
 static void reset_counters(void *arg)
 {
-        int counters = (int)arg;
+        int counters = (int)(long)arg;
         switch (counters) {
         case 4:
                 w_c0_perfctrl3(0);
@@ -313,7 +313,7 @@ static int __init mipsxx_init(void)
         if (!cpu_has_mipsmt_pertccounters)
                 counters = counters_total_to_per_cpu(counters);
 #endif
-        on_each_cpu(reset_counters, (void *)counters, 0, 1);
+        on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
 
         op_model_mipsxx_ops.num_counters = counters;
         switch (current_cpu_type()) {
@@ -382,7 +382,7 @@ static void mipsxx_exit(void)
         int counters = op_model_mipsxx_ops.num_counters;
 
         counters = counters_per_cpu_to_total(counters);
-        on_each_cpu(reset_counters, (void *)counters, 0, 1);
+        on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
 
         perf_irq = save_perf_irq;
 }
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
index 00c36c9dbe0e..e2ddfc49237c 100644
--- a/arch/mips/pci/fixup-au1000.c
+++ b/arch/mips/pci/fixup-au1000.c
@@ -1,10 +1,9 @@
 /*
  * BRIEF MODULE DESCRIPTION
- *      Board specific pci fixups.
+ *      Board specific PCI fixups.
  *
- * Copyright 2001-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index 1314bd58f036..9a57c5ab91dd 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -1,10 +1,9 @@
 /*
  * BRIEF MODULE DESCRIPTION
- *      Alchemy/AMD Au1x00 PCI support.
+ *      Alchemy/AMD Au1xx0 PCI support.
  *
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  Support for all devices (greater than 16) added by David Gathright.
  *
@@ -28,6 +27,7 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
@@ -36,9 +36,9 @@
 
 #include <asm/mach-au1x00/au1000.h>
 
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
+#undef  DEBUG
+#ifdef  DEBUG
+#define DBG(x...) printk(KERN_DEBUG x)
 #else
 #define DBG(x...)
 #endif
@@ -46,7 +46,6 @@
 #define PCI_ACCESS_READ  0
 #define PCI_ACCESS_WRITE 1
 
-
 int (*board_pci_idsel)(unsigned int devsel, int assert);
 
 void mod_wired_entry(int entry, unsigned long entrylo0,
@@ -92,10 +91,9 @@ void __init au1x_pci_cfg_init(void)
 }
 
 static int config_access(unsigned char access_type, struct pci_bus *bus,
-                         unsigned int dev_fn, unsigned char where,
-                         u32 * data)
+                         unsigned int dev_fn, unsigned char where, u32 *data)
 {
-#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
+#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
         unsigned int device = PCI_SLOT(dev_fn);
         unsigned int function = PCI_FUNC(dev_fn);
         unsigned long offset, status;
@@ -114,38 +112,36 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
                         Au1500_PCI_STATCMD);
         au_sync_udelay(1);
 
-        /* Allow board vendors to implement their own off-chip idsel.
+        /*
+         * Allow board vendors to implement their own off-chip IDSEL.
          * If it doesn't succeed, may as well bail out at this point.
          */
-        if (board_pci_idsel) {
-                if (board_pci_idsel(device, 1) == 0) {
-                        *data = 0xffffffff;
-                        local_irq_restore(flags);
-                        return -1;
-                }
+        if (board_pci_idsel && board_pci_idsel(device, 1) == 0) {
+                *data = 0xffffffff;
+                local_irq_restore(flags);
+                return -1;
         }
 
-        /* setup the config window */
-        if (bus->number == 0) {
-                cfg_base = ((1<<device)<<11);
-        } else {
-                cfg_base = 0x80000000 | (bus->number<<16) | (device<<11);
-        }
+        /* Setup the config window */
+        if (bus->number == 0)
+                cfg_base = (1 << device) << 11;
+        else
+                cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
 
-        /* setup the lower bits of the 36 bit address */
-        offset = (function << 8) | (where & ~0x3);
-        /* pick up any address that falls below the page mask */
+        /* Setup the lower bits of the 36-bit address */
+        offset = (function << 8) | (where & ~0x3);
+        /* Pick up any address that falls below the page mask */
         offset |= cfg_base & ~PAGE_MASK;
 
-        /* page boundary */
+        /* Page boundary */
         cfg_base = cfg_base & PAGE_MASK;
 
         /*
          * To improve performance, if the current device is the same as
          * the last device accessed, we don't touch the TLB.
          */
-        entryLo0 = (6 << 26)  | (cfg_base >> 6) | (2 << 3) | 7;
-        entryLo1 = (6 << 26)  | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
+        entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
+        entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
         if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
                 mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
                                 (unsigned long)pci_cfg_vm->addr, PM_4K);
@@ -153,38 +149,37 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
                 last_entryLo1 = entryLo1;
         }
 
-        if (access_type == PCI_ACCESS_WRITE) {
+        if (access_type == PCI_ACCESS_WRITE)
                 au_writel(*data, (int)(pci_cfg_vm->addr + offset));
-        } else {
+        else
                 *data = au_readl((int)(pci_cfg_vm->addr + offset));
-        }
+
         au_sync_udelay(2);
 
-        DBG("cfg_access %d bus->number %d dev %d at %x *data %x conf %x\n",
-                        access_type, bus->number, device, where, *data, offset);
+        DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n",
+            access_type, bus->number, device, where, *data, offset);
 
-        /* check master abort */
+        /* Check master abort */
         status = au_readl(Au1500_PCI_STATCMD);
 
-        if (status & (1<<29)) {
+        if (status & (1 << 29)) {
                 *data = 0xffffffff;
                 error = -1;
                 DBG("Au1x Master Abort\n");
         } else if ((status >> 28) & 0xf) {
-                DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf));
+                DBG("PCI ERR detected: device %u, status %lx\n",
+                    device, (status >> 28) & 0xf);
 
-                /* clear errors */
+                /* Clear errors */
                 au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
 
                 *data = 0xffffffff;
                 error = -1;
         }
 
-        /* Take away the idsel.
-        */
-        if (board_pci_idsel) {
+        /* Take away the IDSEL. */
+        if (board_pci_idsel)
                 (void)board_pci_idsel(device, 0);
-        }
 
         local_irq_restore(flags);
         return error;
@@ -192,7 +187,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
 }
 
 static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
-                            int where, u8 * val)
+                            int where,  u8 *val)
 {
         u32 data;
         int ret;
@@ -206,9 +201,8 @@ static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
         return ret;
 }
 
-
 static int read_config_word(struct pci_bus *bus, unsigned int devfn,
-                            int where, u16 * val)
+                            int where, u16 *val)
 {
         u32 data;
         int ret;
@@ -221,7 +215,7 @@ static int read_config_word(struct pci_bus *bus, unsigned int devfn,
 }
 
 static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
-                             int where, u32 * val)
+                             int where, u32 *val)
 {
         int ret;
 
@@ -229,9 +223,8 @@ static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
         return ret;
 }
 
-static int
-write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
-                  u8 val)
+static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
+                             int where, u8 val)
 {
         u32 data = 0;
 
@@ -239,7 +232,7 @@ write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
                 return -1;
 
         data = (data & ~(0xff << ((where & 3) << 3))) |
-            (val << ((where & 3) << 3));
+               (val << ((where & 3) << 3));
 
         if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
                 return -1;
@@ -247,9 +240,8 @@ write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
         return PCIBIOS_SUCCESSFUL;
 }
 
-static int
-write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
-                  u16 val)
+static int write_config_word(struct pci_bus *bus, unsigned int devfn,
+                             int where, u16 val)
 {
         u32 data = 0;
 
@@ -257,18 +249,16 @@ write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
                 return -1;
 
         data = (data & ~(0xffff << ((where & 3) << 3))) |
-            (val << ((where & 3) << 3));
+               (val << ((where & 3) << 3));
 
         if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
                 return -1;
 
-
         return PCIBIOS_SUCCESSFUL;
 }
 
-static int
-write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
-                   u32 val)
+static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
+                              int where, u32 val)
 {
         if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
                 return -1;
@@ -277,18 +267,20 @@ write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
 }
 
 static int config_read(struct pci_bus *bus, unsigned int devfn,
-                       int where, int size, u32 * val)
+                       int where, int size, u32 *val)
 {
         switch (size) {
         case 1: {
                         u8 _val;
                         int rc = read_config_byte(bus, devfn, where, &_val);
+
                         *val = _val;
                         return rc;
                 }
-       case 2: {
+        case 2: {
                         u16 _val;
                         int rc = read_config_word(bus, devfn, where, &_val);
+
                         *val = _val;
                         return rc;
                 }
@@ -310,7 +302,6 @@ static int config_write(struct pci_bus *bus, unsigned int devfn,
         }
 }
 
-
 struct pci_ops au1x_pci_ops = {
         config_read,
         config_write
diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c
index 1fa09929cd7a..b46b3e211775 100644
--- a/arch/mips/pci/ops-bridge.c
+++ b/arch/mips/pci/ops-bridge.c
@@ -14,6 +14,22 @@
 #include <asm/sn/sn0/hub.h>
 
 /*
+ * Most of the IOC3 PCI config register aren't present
+ * we emulate what is needed for a normal PCI enumeration
+ */
+static u32 emulate_ioc3_cfg(int where, int size)
+{
+        if (size == 1 && where == 0x3d)
+                return 0x01;
+        else if (size == 2 && where == 0x3c)
+                return 0x0100;
+        else if (size == 4 && where == 0x3c)
+                return 0x00000100;
+
+        return 0;
+}
+
+/*
  * The Bridge ASIC supports both type 0 and type 1 access.  Type 1 is
  * not really documented, so right now I can't write code which uses it.
  * Therefore we use type 0 accesses for now even though they won't work
@@ -64,7 +80,7 @@ oh_my_gawd:
          * generic PCI code a chance to look at the wrong register.
          */
         if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
-                *value = 0;
+                *value = emulate_ioc3_cfg(where, size);
                 return PCIBIOS_SUCCESSFUL;
         }
 
@@ -127,7 +143,7 @@ oh_my_gawd:
          * generic PCI code a chance to look at the wrong register.
          */
         if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
-                *value = 0;
+                *value = emulate_ioc3_cfg(where, size);
                 return PCIBIOS_SUCCESSFUL;
         }
 
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index bb64828a92fe..a18516925cdd 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -47,6 +47,9 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
         static int num_bridges = 0;
         bridge_t *bridge;
         int slot;
+        extern int pci_probe_only;
+
+        pci_probe_only = 1;
 
         printk("a bridge\n");
 
@@ -100,6 +103,11 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
          */
         bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
                                  BRIDGE_CTRL_MEM_SWAP;
+#ifdef CONFIG_PAGE_SIZE_4KB
+        bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE;
+#else /* 16kB or larger */
+        bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE;
+#endif
 
         /*
          * Hmm...  IRIX sets additional bits in the address which
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index 42e4d2c800fa..2a09ad91ec8c 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -207,6 +207,7 @@ struct pci_controller sb1250_controller = {
 
 static int __init sb1250_pcibios_init(void)
 {
+        void __iomem *io_map_base;
         uint32_t cmdreg;
         uint64_t reg;
         extern int pci_probe_only;
@@ -253,12 +254,13 @@ static int __init sb1250_pcibios_init(void)
          * works correctly with most of Linux's drivers.
          * XXX ehs: Should this happen in PCI Device mode?
          */
-
-        set_io_port_base((unsigned long)
-                         ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536));
         isa_slot_offset = (unsigned long)
             ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024);
 
+        io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
+        sb1250_controller.io_map_base = io_map_base;
+        set_io_port_base((unsigned long)io_map_base);
+
 #ifdef CONFIG_SIBYTE_HAS_LDT
         /*
          * Also check the LDT bridge's enable, just in case we didn't
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index 33c4f683d067..d1e049b55f34 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2001-2003 MontaVista Software Inc.
  *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
  *  Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -300,6 +300,18 @@ static int __init vr41xx_pciu_init(void)
                 ioport_resource.end = IO_PORT_RESOURCE_END;
         }
 
+        if (setup->master_io) {
+                void __iomem *io_map_base;
+                struct resource *res = vr41xx_pci_controller.io_resource;
+                master = setup->master_io;
+                io_map_base = ioremap(master->bus_base_address,
+                                      res->end - res->start + 1);
+                if (!io_map_base)
+                        return -EBUSY;
+
+                vr41xx_pci_controller.io_map_base = (unsigned long)io_map_base;
+        }
+
         register_pci_controller(&vr41xx_pci_controller);
 
         return 0;
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
index ab96a2d7f4c4..11769b55438c 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
@@ -126,9 +126,6 @@ static irqreturn_t hwbutton_handler(int irq, void *data)
         struct hwbutton_interrupt *hirq = data;
         unsigned long cic_ext = *CIC_EXT_CFG_REG;
 
-        if (irq != hirq->irq)
-                return IRQ_NONE;
-
         if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
                 /* Interrupt: pin is now HI */
                 CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
@@ -164,7 +161,7 @@ static int msp_hwbutton_register(struct hwbutton_interrupt *hirq)
         *CIC_EXT_CFG_REG = cic_ext;
 
         return request_irq(hirq->irq, hwbutton_handler, IRQF_DISABLED,
-                                hirq->name, (void *)hirq);
+                           hirq->name, hirq);
 }
 
 static int __init msp_hwbutton_setup(void)
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 7093e7c573a4..4a500e8cd3cc 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -161,27 +161,6 @@ cnodeid_t get_compact_nodeid(void)
         return NASID_TO_COMPACT_NODEID(get_nasid());
 }
 
-/* Extracted from the IOC3 meta driver.  FIXME.  */
-static inline void ioc3_sio_init(void)
-{
-        struct ioc3 *ioc3;
-        nasid_t nid;
-        long loops;
-
-        nid = get_nasid();
-        ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
-
-        ioc3->sscr_a = 0;                       /* PIO mode for uarta.  */
-        ioc3->sscr_b = 0;                       /* PIO mode for uartb.  */
-        ioc3->sio_iec = ~0;
-        ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT);
-
-        loops=1000000; while(loops--);
-        ioc3->sregs.uarta.iu_fcr = 0;
-        ioc3->sregs.uartb.iu_fcr = 0;
-        loops=1000000; while(loops--);
-}
-
 static inline void ioc3_eth_init(void)
 {
         struct ioc3 *ioc3;
@@ -234,7 +213,6 @@ void __init plat_mem_setup(void)
                 panic("Kernel compiled for N mode.");
 #endif
 
-        ioc3_sio_init();
         ioc3_eth_init();
         per_cpu_init();
 
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index bf438d02366e..42cd10956306 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -33,10 +33,6 @@
 #define SLOT_PFNSHIFT           (SLOT_SHIFT - PAGE_SHIFT)
 #define PFN_NASIDSHFT           (NASID_SHFT - PAGE_SHIFT)
 
-#define SLOT_IGNORED            0xffff
-
-static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES];
-static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS];
 static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
 
 struct node_data *__node_data[MAX_COMPACT_NODES];
@@ -267,51 +263,6 @@ static pfn_t __init slot_getbasepfn(cnodeid_t cnode, int slot)
         return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT);
 }
 
-/*
- * Return the number of pages of memory provided by the given slot
- * on the specified node.
- */
-static pfn_t __init slot_getsize(cnodeid_t node, int slot)
-{
-        return (pfn_t) slot_psize_cache[node][slot];
-}
-
-/*
- * Return highest slot filled
- */
-static int __init node_getlastslot(cnodeid_t node)
-{
-        return (int) slot_lastfilled_cache[node];
-}
-
-/*
- * Return the pfn of the last free page of memory on a node.
- */
-static pfn_t __init node_getmaxclick(cnodeid_t node)
-{
-        pfn_t   slot_psize;
-        int     slot;
-
-        /*
-         * Start at the top slot. When we find a slot with memory in it,
-         * that's the winner.
-         */
-        for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) {
-                if ((slot_psize = slot_getsize(node, slot))) {
-                        if (slot_psize == SLOT_IGNORED)
-                                continue;
-                        /* Return the basepfn + the slot size, minus 1. */
-                        return slot_getbasepfn(node, slot) + slot_psize - 1;
-                }
-        }
-
-        /*
-         * If there's no memory on the node, return 0. This is likely
-         * to cause problems.
-         */
-        return 0;
-}
-
 static pfn_t __init slot_psize_compute(cnodeid_t node, int slot)
 {
         nasid_t nasid;
@@ -404,13 +355,13 @@ static void __init mlreset(void)
 static void __init szmem(void)
 {
         pfn_t slot_psize, slot0sz = 0, nodebytes;       /* Hack to detect problem configs */
-        int slot, ignore;
+        int slot;
         cnodeid_t node;
 
         num_physpages = 0;
 
         for_each_online_node(node) {
-                ignore = nodebytes = 0;
+                nodebytes = 0;
                 for (slot = 0; slot < MAX_MEM_SLOTS; slot++) {
                         slot_psize = slot_psize_compute(node, slot);
                         if (slot == 0)
@@ -420,21 +371,20 @@ static void __init szmem(void)
                          * kernel text.
                          */
                         nodebytes += (1LL << SLOT_SHIFT);
+
+                        if (!slot_psize)
+                                continue;
+
                         if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) >
-                                                (slot0sz << PAGE_SHIFT))
-                                ignore = 1;
-                        if (ignore && slot_psize) {
+                                                (slot0sz << PAGE_SHIFT)) {
                                 printk("Ignoring slot %d onwards on node %d\n",
                                                                 slot, node);
-                                slot_psize_cache[node][slot] = SLOT_IGNORED;
                                 slot = MAX_MEM_SLOTS;
                                 continue;
                         }
                         num_physpages += slot_psize;
-                        slot_psize_cache[node][slot] =
-                                        (unsigned short) slot_psize;
-                        if (slot_psize)
-                                slot_lastfilled_cache[node] = slot;
+                        add_active_range(node, slot_getbasepfn(node, slot),
+                                         slot_getbasepfn(node, slot) + slot_psize);
                 }
         }
 }
@@ -442,18 +392,20 @@ static void __init szmem(void)
 static void __init node_mem_init(cnodeid_t node)
 {
         pfn_t slot_firstpfn = slot_getbasepfn(node, 0);
-        pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0);
         pfn_t slot_freepfn = node_getfirstfree(node);
-        struct pglist_data *pd;
         unsigned long bootmap_size;
+        pfn_t start_pfn, end_pfn;
+
+        get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
 
         /*
          * Allocate the node data structures on the node first.
          */
         __node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
 
-        pd = NODE_DATA(node);
-        pd->bdata = &plat_node_bdata[node];
+        NODE_DATA(node)->bdata = &plat_node_bdata[node];
+        NODE_DATA(node)->node_start_pfn = start_pfn;
+        NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
 
         cpus_clear(hub_data(node)->h_cpus);
 
@@ -461,12 +413,12 @@ static void __init node_mem_init(cnodeid_t node)
                                sizeof(struct hub_data));
 
         bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn,
-                                        slot_firstpfn, slot_lastpfn);
-        free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
-                        (slot_lastpfn - slot_firstpfn) << PAGE_SHIFT);
+                                        start_pfn, end_pfn);
+        free_bootmem_with_active_regions(node, end_pfn);
         reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
                 ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size,
                 BOOTMEM_DEFAULT);
+        sparse_memory_present_with_active_regions(node);
 }
 
 /*
@@ -515,16 +467,15 @@ void __init paging_init(void)
         pagetable_init();
 
         for_each_online_node(node) {
-                pfn_t start_pfn = slot_getbasepfn(node, 0);
-                pfn_t end_pfn = node_getmaxclick(node) + 1;
+                pfn_t start_pfn, end_pfn;
 
-                zones_size[ZONE_NORMAL] = end_pfn - start_pfn;
-                free_area_init_node(node, NODE_DATA(node),
-                                zones_size, start_pfn, NULL);
+                get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
 
                 if (end_pfn > max_low_pfn)
                         max_low_pfn = end_pfn;
         }
+        zones_size[ZONE_NORMAL] = max_low_pfn;
+        free_area_init_nodes(zones_size);
 }
 
 void __init mem_init(void)
@@ -535,34 +486,10 @@ void __init mem_init(void)
         high_memory = (void *) __va(num_physpages << PAGE_SHIFT);
 
         for_each_online_node(node) {
-                unsigned slot, numslots;
-                struct page *end, *p;
-
                 /*
                  * This will free up the bootmem, ie, slot 0 memory.
                  */
                 totalram_pages += free_all_bootmem_node(NODE_DATA(node));
-
-                /*
-                 * We need to manually do the other slots.
-                 */
-                numslots = node_getlastslot(node);
-                for (slot = 1; slot <= numslots; slot++) {
-                        p = nid_page_nr(node, slot_getbasepfn(node, slot) -
-                                              slot_getbasepfn(node, 0));
-
-                        /*
-                         * Free valid memory in current slot.
-                         */
-                        for (end = p + slot_getsize(node, slot); p < end; p++) {
-                                /* if (!page_is_ram(pgnr)) continue; */
-                                /* commented out until page_is_ram works */
-                                ClearPageReserved(p);
-                                init_page_count(p);
-                                __free_page(p);
-                                totalram_pages++;
-                        }
-                }
         }
 
         totalram_pages -= setup_zero_pages();   /* This comes from node 0 */
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index f15fc93d6b35..ba5cdebeaf0d 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -176,11 +176,14 @@ static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action)
 static void __cpuinit ip27_init_secondary(void)
 {
         per_cpu_init();
-        local_irq_enable();
 }
 
 static void __cpuinit ip27_smp_finish(void)
 {
+        extern void hub_rt_clock_event_init(void);
+
+        hub_rt_clock_event_init();
+        local_irq_enable();
 }
 
 static void __init ip27_cpus_done(void)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 25d3baf0ebc4..8b4e854af925 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -158,12 +158,15 @@ static void rt_set_mode(enum clock_event_mode mode,
         }
 }
 
-unsigned int rt_timer_irq;
+int rt_timer_irq;
+
+static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
+static DEFINE_PER_CPU(char [11], hub_rt_name);
 
 static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
 {
-        struct clock_event_device *cd = dev_id;
         unsigned int cpu = smp_processor_id();
+        struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
         int slice = cputoslice(cpu);
 
         /*
@@ -192,10 +195,7 @@ struct irqaction hub_rt_irqaction = {
 #define NSEC_PER_CYCLE          800
 #define CYCLES_PER_SEC          (NSEC_PER_SEC / NSEC_PER_CYCLE)
 
-static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
-static DEFINE_PER_CPU(char [11], hub_rt_name);
-
-static void __cpuinit hub_rt_clock_event_init(void)
+void __cpuinit hub_rt_clock_event_init(void)
 {
         unsigned int cpu = smp_processor_id();
         struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
@@ -203,23 +203,22 @@ static void __cpuinit hub_rt_clock_event_init(void)
         int irq = rt_timer_irq;
 
         sprintf(name, "hub-rt %d", cpu);
-        cd->name                = "HUB-RT",
-        cd->features            = CLOCK_EVT_FEAT_ONESHOT,
+        cd->name                = name;
+        cd->features            = CLOCK_EVT_FEAT_ONESHOT;
         clockevent_set_clock(cd, CYCLES_PER_SEC);
         cd->max_delta_ns        = clockevent_delta2ns(0xfffffffffffff, cd);
         cd->min_delta_ns        = clockevent_delta2ns(0x300, cd);
-        cd->rating              = 200,
-        cd->irq                 = irq,
-        cd->cpumask             = cpumask_of_cpu(cpu),
-        cd->rating              = 300,
-        cd->set_next_event      = rt_next_event,
-        cd->set_mode            = rt_set_mode,
+        cd->rating              = 200;
+        cd->irq                 = irq;
+        cd->cpumask             = cpumask_of_cpu(cpu);
+        cd->set_next_event      = rt_next_event;
+        cd->set_mode            = rt_set_mode;
         clockevents_register_device(cd);
 }
 
 static void __init hub_rt_clock_event_global_init(void)
 {
-        unsigned int irq;
+        int irq;
 
         do {
                 smp_wmb();
@@ -261,6 +260,7 @@ void __init plat_time_init(void)
 {
         hub_rt_clocksource_init();
         hub_rt_clock_event_global_init();
+        hub_rt_clock_event_init();
 }
 
 void __cpuinit cpu_time_init(void)
@@ -281,7 +281,6 @@ void __cpuinit cpu_time_init(void)
 
         printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed);
 
-        hub_rt_clock_event_init();
         set_c0_status(SRB_TIMOCLK);
 }
 
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 2d626039195c..1775755a2619 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,3 +1,3 @@
-lib-y                           = setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y                           := setup.o rtc_xicor1241.o rtc_m41t81.o
 
-lib-$(CONFIG_KGDB)              += dbg_io.o
+obj-$(CONFIG_KGDB)              += dbg_io.o
diff --git a/arch/mn10300/boot/install.sh b/arch/mn10300/boot/install.sh
index 072951c83976..abba30971191 100644
--- a/arch/mn10300/boot/install.sh
+++ b/arch/mn10300/boot/install.sh
@@ -26,42 +26,42 @@ rm -fr $4/../usr/include/linux $4/../usr/include/asm
 install -c -m 0755 $2 $4/vmlinuz
 install -c -m 0755 $5 $4/boot.rom
 install -c -m 0755 -d $4/../usr/include/linux
-cd $TOPDIR/include/linux
+cd ${srctree}/include/linux
 for i in `find . -maxdepth 1 -name '*.h' -print`; do
   install -c -m 0644 $i $4/../usr/include/linux
 done
 install -c -m 0755 -d $4/../usr/include/linux/byteorder
-cd $TOPDIR/include/linux/byteorder
+cd ${srctree}/include/linux/byteorder
 for i in `find . -name '*.h' -print`; do
   install -c -m 0644 $i $4/../usr/include/linux/byteorder
 done
 install -c -m 0755 -d $4/../usr/include/linux/lockd
-cd $TOPDIR/include/linux/lockd
+cd ${srctree}/include/linux/lockd
 for i in `find . -name '*.h' -print`; do
   install -c -m 0644 $i $4/../usr/include/linux/lockd
 done
 install -c -m 0755 -d $4/../usr/include/linux/netfilter_ipv4
-cd $TOPDIR/include/linux/netfilter_ipv4
+cd ${srctree}/include/linux/netfilter_ipv4
 for i in `find . -name '*.h' -print`; do
   install -c -m 0644 $i $4/../usr/include/linux/netfilter_ipv4
 done
 install -c -m 0755 -d $4/../usr/include/linux/nfsd
-cd $TOPDIR/include/linux/nfsd
+cd ${srctree}/include/linux/nfsd
 for i in `find . -name '*.h' -print`; do
   install -c -m 0644 $i $4/../usr/include/linux/nfsd/$i
 done
 install -c -m 0755 -d $4/../usr/include/linux/raid
-cd $TOPDIR/include/linux/raid
+cd ${srctree}/include/linux/raid
 for i in `find . -name '*.h' -print`; do
   install -c -m 0644 $i $4/../usr/include/linux/raid
 done
 install -c -m 0755 -d $4/../usr/include/linux/sunrpc
-cd $TOPDIR/include/linux/sunrpc
+cd ${srctree}/include/linux/sunrpc
 for i in `find . -name '*.h' -print`; do
   install -c -m 0644 $i $4/../usr/include/linux/sunrpc
 done
 install -c -m 0755 -d $4/../usr/include/asm
-cd $TOPDIR/include/asm
+cd ${srctree}/include/asm
 for i in `find . -name '*.h' -print`; do
   install -c -m 0644 $i $4/../usr/include/asm
 done
diff --git a/arch/mn10300/kernel/init_task.c b/arch/mn10300/kernel/init_task.c
index 39fe6882dd1d..af16f6e5c918 100644
--- a/arch/mn10300/kernel/init_task.c
+++ b/arch/mn10300/kernel/init_task.c
@@ -19,7 +19,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 3b0d579fc15d..9c623c88387b 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -20,7 +20,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 6b7ce2636851..017121ce896f 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -17,7 +17,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 1f6585a56f97..016d3fc4111c 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -4,9 +4,6 @@
 
 extra-y                 := init_task.o head.o vmlinux.lds
 
-AFLAGS_entry.o  := -traditional
-AFLAGS_pacache.o := -traditional
-
 obj-y           := cache.o pacache.o setup.o traps.o time.o irq.o \
                    pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \
                    ptrace.o hardware.o inventory.o drivers.o \
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 111d47284eac..d1fa4edd2d80 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -40,16 +40,8 @@
 #include <linux/linkage.h>
 
 #ifdef CONFIG_64BIT
-#define CMPIB           cmpib,*
-#define CMPB            cmpb,*
-#define COND(x)         *x
-
         .level 2.0w
 #else
-#define CMPIB           cmpib,
-#define CMPB            cmpb,
-#define COND(x)         x
-
         .level 2.0
 #endif
 
@@ -957,9 +949,9 @@ intr_check_sig:
          * Only do signals if we are returning to user space
          */
         LDREG   PT_IASQ0(%r16), %r20
-        CMPIB=,n 0,%r20,intr_restore /* backward */
+        cmpib,COND(=),n 0,%r20,intr_restore /* backward */
         LDREG   PT_IASQ1(%r16), %r20
-        CMPIB=,n 0,%r20,intr_restore /* backward */
+        cmpib,COND(=),n 0,%r20,intr_restore /* backward */
 
         copy    %r0, %r25                       /* long in_syscall = 0 */
 #ifdef CONFIG_64BIT
@@ -1013,10 +1005,10 @@ intr_do_resched:
          * we jump back to intr_restore.
          */
         LDREG   PT_IASQ0(%r16), %r20
-        CMPIB=  0, %r20, intr_do_preempt
+        cmpib,COND(=)   0, %r20, intr_do_preempt
         nop
         LDREG   PT_IASQ1(%r16), %r20
-        CMPIB=  0, %r20, intr_do_preempt
+        cmpib,COND(=)   0, %r20, intr_do_preempt
         nop
 
 #ifdef CONFIG_64BIT
@@ -1045,7 +1037,7 @@ intr_do_preempt:
         /* current_thread_info()->preempt_count */
         mfctl   %cr30, %r1
         LDREG   TI_PRE_COUNT(%r1), %r19
-        CMPIB<> 0, %r19, intr_restore   /* if preempt_count > 0 */
+        cmpib,COND(<>)  0, %r19, intr_restore   /* if preempt_count > 0 */
         nop                             /* prev insn branched backwards */
 
         /* check if we interrupted a critical path */
@@ -1064,7 +1056,7 @@ intr_do_preempt:
          */
 
 intr_extint:
-        CMPIB=,n 0,%r16,1f
+        cmpib,COND(=),n 0,%r16,1f
 
         get_stack_use_cr30
         b,n 2f
@@ -1099,7 +1091,7 @@ ENDPROC(syscall_exit_rfi)
 
 ENTRY(intr_save)                /* for os_hpmc */
         mfsp    %sr7,%r16
-        CMPIB=,n 0,%r16,1f
+        cmpib,COND(=),n 0,%r16,1f
         get_stack_use_cr30
         b       2f
         copy    %r8,%r26
@@ -1121,7 +1113,7 @@ ENTRY(intr_save)		/* for os_hpmc */
          *           adjust isr/ior below.
          */
 
-        CMPIB=,n        6,%r26,skip_save_ior
+        cmpib,COND(=),n        6,%r26,skip_save_ior
 
 
         mfctl           %cr20, %r16 /* isr */
@@ -1450,11 +1442,11 @@ nadtlb_emulate:
         bb,>=,n         %r9,26,nadtlb_nullify  /* m bit not set, just nullify */
         BL              get_register,%r25
         extrw,u         %r9,15,5,%r8           /* Get index register # */
-        CMPIB=,n        -1,%r1,nadtlb_fault    /* have to use slow path */
+        cmpib,COND(=),n        -1,%r1,nadtlb_fault    /* have to use slow path */
         copy            %r1,%r24
         BL              get_register,%r25
         extrw,u         %r9,10,5,%r8           /* Get base register # */
-        CMPIB=,n        -1,%r1,nadtlb_fault    /* have to use slow path */
+        cmpib,COND(=),n        -1,%r1,nadtlb_fault    /* have to use slow path */
         BL              set_register,%r25
         add,l           %r1,%r24,%r1           /* doesn't affect c/b bits */
 
@@ -1486,7 +1478,7 @@ nadtlb_probe_check:
         cmpb,<>,n       %r16,%r17,nadtlb_fault /* Must be probe,[rw]*/
         BL              get_register,%r25      /* Find the target register */
         extrw,u         %r9,31,5,%r8           /* Get target register */
-        CMPIB=,n        -1,%r1,nadtlb_fault    /* have to use slow path */
+        cmpib,COND(=),n        -1,%r1,nadtlb_fault    /* have to use slow path */
         BL              set_register,%r25
         copy            %r0,%r1                /* Write zero to target register */
         b nadtlb_nullify                       /* Nullify return insn */
@@ -1570,12 +1562,12 @@ dbit_trap_20w:
         L3_ptep         ptp,pte,t0,va,dbit_fault
 
 #ifdef CONFIG_SMP
-        CMPIB=,n        0,spc,dbit_nolock_20w
+        cmpib,COND(=),n        0,spc,dbit_nolock_20w
         load32          PA(pa_dbit_lock),t0
 
 dbit_spin_20w:
         LDCW            0(t0),t1
-        cmpib,=         0,t1,dbit_spin_20w
+        cmpib,COND(=)         0,t1,dbit_spin_20w
         nop
 
 dbit_nolock_20w:
@@ -1586,7 +1578,7 @@ dbit_nolock_20w:
                 
         idtlbt          pte,prot
 #ifdef CONFIG_SMP
-        CMPIB=,n        0,spc,dbit_nounlock_20w
+        cmpib,COND(=),n        0,spc,dbit_nounlock_20w
         ldi             1,t1
         stw             t1,0(t0)
 
@@ -1606,7 +1598,7 @@ dbit_trap_11:
         L2_ptep         ptp,pte,t0,va,dbit_fault
 
 #ifdef CONFIG_SMP
-        CMPIB=,n        0,spc,dbit_nolock_11
+        cmpib,COND(=),n        0,spc,dbit_nolock_11
         load32          PA(pa_dbit_lock),t0
 
 dbit_spin_11:
@@ -1628,7 +1620,7 @@ dbit_nolock_11:
 
         mtsp            t1, %sr1     /* Restore sr1 */
 #ifdef CONFIG_SMP
-        CMPIB=,n        0,spc,dbit_nounlock_11
+        cmpib,COND(=),n        0,spc,dbit_nounlock_11
         ldi             1,t1
         stw             t1,0(t0)
 
@@ -1646,7 +1638,7 @@ dbit_trap_20:
         L2_ptep         ptp,pte,t0,va,dbit_fault
 
 #ifdef CONFIG_SMP
-        CMPIB=,n        0,spc,dbit_nolock_20
+        cmpib,COND(=),n        0,spc,dbit_nolock_20
         load32          PA(pa_dbit_lock),t0
 
 dbit_spin_20:
@@ -1665,7 +1657,7 @@ dbit_nolock_20:
         idtlbt          pte,prot
 
 #ifdef CONFIG_SMP
-        CMPIB=,n        0,spc,dbit_nounlock_20
+        cmpib,COND(=),n        0,spc,dbit_nounlock_20
         ldi             1,t1
         stw             t1,0(t0)
 
@@ -1994,7 +1986,7 @@ ENTRY(syscall_exit)
 
         /* We can't use "CMPIB<> PER_HPUX" since "im5" field is sign extended */
         ldo       -PER_HPUX(%r19), %r19
-        CMPIB<>,n 0,%r19,1f
+        cmpib,COND(<>),n 0,%r19,1f
 
         /* Save other hpux returns if personality is PER_HPUX */
         STREG     %r22,TASK_PT_GR22(%r1)
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index ec2482dc1beb..a84e31e82876 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -32,7 +32,8 @@ ENTRY(boot_args)
         .word 0 /* arg3 */
 END(boot_args)
 
-        .section .text.head
+        __HEAD
+
         .align  4
         .import init_thread_union,data
         .import fault_vector_20,code    /* IVA parisc 2.0 32 bit */
diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c
index 26198a074d67..f5941c086551 100644
--- a/arch/parisc/kernel/init_task.c
+++ b/arch/parisc/kernel/init_task.c
@@ -35,7 +35,6 @@
 #include <asm/pgalloc.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index 4845a6444633..bd1f7f1ff74e 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -499,7 +499,7 @@ add_system_map_addresses(struct parisc_device *dev, int num_addrs,
         dev->addr = kmalloc(num_addrs * sizeof(unsigned long), GFP_KERNEL);
         if(!dev->addr) {
                 printk(KERN_ERR "%s %s(): memory allocation failure\n",
-                       __FILE__, __FUNCTION__);
+                       __FILE__, __func__);
                 return;
         }
 
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 5901092e0196..09b77b2553c6 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -85,7 +85,7 @@ ENTRY(flush_tlb_all_local)
         LDREG           ITLB_OFF_COUNT(%r1), %arg2
         LDREG           ITLB_LOOP(%r1), %arg3
 
-        ADDIB=          -1, %arg3, fitoneloop   /* Preadjust and test */
+        addib,COND(=)           -1, %arg3, fitoneloop   /* Preadjust and test */
         movb,<,n        %arg3, %r31, fitdone    /* If loop < 0, skip */
         copy            %arg0, %r28             /* Init base addr */
 
@@ -95,14 +95,14 @@ fitmanyloop:					/* Loop if LOOP >= 2 */
         copy            %arg2, %r29             /* Init middle loop count */
 
 fitmanymiddle:                                  /* Loop if LOOP >= 2 */
-        ADDIB>          -1, %r31, fitmanymiddle /* Adjusted inner loop decr */
+        addib,COND(>)           -1, %r31, fitmanymiddle /* Adjusted inner loop decr */
         pitlbe          0(%sr1, %r28)
         pitlbe,m        %arg1(%sr1, %r28)       /* Last pitlbe and addr adjust */
-        ADDIB>          -1, %r29, fitmanymiddle /* Middle loop decr */
+        addib,COND(>)           -1, %r29, fitmanymiddle /* Middle loop decr */
         copy            %arg3, %r31             /* Re-init inner loop count */
 
         movb,tr         %arg0, %r28, fitmanyloop /* Re-init base addr */
-        ADDIB<=,n       -1, %r22, fitdone       /* Outer loop count decr */
+        addib,COND(<=),n        -1, %r22, fitdone       /* Outer loop count decr */
 
 fitoneloop:                                     /* Loop if LOOP = 1 */
         mtsp            %r20, %sr1
@@ -110,10 +110,10 @@ fitoneloop:					/* Loop if LOOP = 1 */
         copy            %arg2, %r29             /* init middle loop count */
 
 fitonemiddle:                                   /* Loop if LOOP = 1 */
-        ADDIB>          -1, %r29, fitonemiddle  /* Middle loop count decr */
+        addib,COND(>)           -1, %r29, fitonemiddle  /* Middle loop count decr */
         pitlbe,m        %arg1(%sr1, %r28)       /* pitlbe for one loop */
 
-        ADDIB>          -1, %r22, fitoneloop    /* Outer loop count decr */
+        addib,COND(>)           -1, %r22, fitoneloop    /* Outer loop count decr */
         add             %r21, %r20, %r20                /* increment space */
 
 fitdone:
@@ -128,7 +128,7 @@ fitdone:
         LDREG           DTLB_OFF_COUNT(%r1), %arg2
         LDREG           DTLB_LOOP(%r1), %arg3
 
-        ADDIB=          -1, %arg3, fdtoneloop   /* Preadjust and test */
+        addib,COND(=)           -1, %arg3, fdtoneloop   /* Preadjust and test */
         movb,<,n        %arg3, %r31, fdtdone    /* If loop < 0, skip */
         copy            %arg0, %r28             /* Init base addr */
 
@@ -138,14 +138,14 @@ fdtmanyloop:					/* Loop if LOOP >= 2 */
         copy            %arg2, %r29             /* Init middle loop count */
 
 fdtmanymiddle:                                  /* Loop if LOOP >= 2 */
-        ADDIB>          -1, %r31, fdtmanymiddle /* Adjusted inner loop decr */
+        addib,COND(>)           -1, %r31, fdtmanymiddle /* Adjusted inner loop decr */
         pdtlbe          0(%sr1, %r28)
         pdtlbe,m        %arg1(%sr1, %r28)       /* Last pdtlbe and addr adjust */
-        ADDIB>          -1, %r29, fdtmanymiddle /* Middle loop decr */
+        addib,COND(>)           -1, %r29, fdtmanymiddle /* Middle loop decr */
         copy            %arg3, %r31             /* Re-init inner loop count */
 
         movb,tr         %arg0, %r28, fdtmanyloop /* Re-init base addr */
-        ADDIB<=,n       -1, %r22,fdtdone        /* Outer loop count decr */
+        addib,COND(<=),n        -1, %r22,fdtdone        /* Outer loop count decr */
 
 fdtoneloop:                                     /* Loop if LOOP = 1 */
         mtsp            %r20, %sr1
@@ -153,10 +153,10 @@ fdtoneloop:					/* Loop if LOOP = 1 */
         copy            %arg2, %r29             /* init middle loop count */
 
 fdtonemiddle:                                   /* Loop if LOOP = 1 */
-        ADDIB>          -1, %r29, fdtonemiddle  /* Middle loop count decr */
+        addib,COND(>)           -1, %r29, fdtonemiddle  /* Middle loop count decr */
         pdtlbe,m        %arg1(%sr1, %r28)       /* pdtlbe for one loop */
 
-        ADDIB>          -1, %r22, fdtoneloop    /* Outer loop count decr */
+        addib,COND(>)           -1, %r22, fdtoneloop    /* Outer loop count decr */
         add             %r21, %r20, %r20        /* increment space */
 
 
@@ -209,18 +209,18 @@ ENTRY(flush_instruction_cache_local)
         LDREG           ICACHE_COUNT(%r1), %arg2
         LDREG           ICACHE_LOOP(%r1), %arg3
         rsm             PSW_SM_I, %r22          /* No mmgt ops during loop*/
-        ADDIB=          -1, %arg3, fioneloop    /* Preadjust and test */
+        addib,COND(=)           -1, %arg3, fioneloop    /* Preadjust and test */
         movb,<,n        %arg3, %r31, fisync     /* If loop < 0, do sync */
 
 fimanyloop:                                     /* Loop if LOOP >= 2 */
-        ADDIB>          -1, %r31, fimanyloop    /* Adjusted inner loop decr */
+        addib,COND(>)           -1, %r31, fimanyloop    /* Adjusted inner loop decr */
         fice            %r0(%sr1, %arg0)
         fice,m          %arg1(%sr1, %arg0)      /* Last fice and addr adjust */
         movb,tr         %arg3, %r31, fimanyloop /* Re-init inner loop count */
-        ADDIB<=,n       -1, %arg2, fisync       /* Outer loop decr */
+        addib,COND(<=),n        -1, %arg2, fisync       /* Outer loop decr */
 
 fioneloop:                                      /* Loop if LOOP = 1 */
-        ADDIB>          -1, %arg2, fioneloop    /* Outer loop count decr */
+        addib,COND(>)           -1, %arg2, fioneloop    /* Outer loop count decr */
         fice,m          %arg1(%sr1, %arg0)      /* Fice for one loop */
 
 fisync:
@@ -250,18 +250,18 @@ ENTRY(flush_data_cache_local)
         LDREG           DCACHE_COUNT(%r1), %arg2
         LDREG           DCACHE_LOOP(%r1), %arg3
         rsm             PSW_SM_I, %r22
-        ADDIB=          -1, %arg3, fdoneloop    /* Preadjust and test */
+        addib,COND(=)           -1, %arg3, fdoneloop    /* Preadjust and test */
         movb,<,n        %arg3, %r31, fdsync     /* If loop < 0, do sync */
 
 fdmanyloop:                                     /* Loop if LOOP >= 2 */
-        ADDIB>          -1, %r31, fdmanyloop    /* Adjusted inner loop decr */
+        addib,COND(>)           -1, %r31, fdmanyloop    /* Adjusted inner loop decr */
         fdce            %r0(%sr1, %arg0)
         fdce,m          %arg1(%sr1, %arg0)      /* Last fdce and addr adjust */
         movb,tr         %arg3, %r31, fdmanyloop /* Re-init inner loop count */
-        ADDIB<=,n       -1, %arg2, fdsync       /* Outer loop decr */
+        addib,COND(<=),n        -1, %arg2, fdsync       /* Outer loop decr */
 
 fdoneloop:                                      /* Loop if LOOP = 1 */
-        ADDIB>          -1, %arg2, fdoneloop    /* Outer loop count decr */
+        addib,COND(>)           -1, %arg2, fdoneloop    /* Outer loop count decr */
         fdce,m          %arg1(%sr1, %arg0)      /* Fdce for one loop */
 
 fdsync:
@@ -342,7 +342,7 @@ ENTRY(copy_user_page_asm)
          * non-taken backward branch. Note that .+4 is a backwards branch.
          * The ldd should only get executed if the branch is taken.
          */
-        ADDIB>,n        -1, %r1, 1b             /* bundle 10 */
+        addib,COND(>),n -1, %r1, 1b             /* bundle 10 */
         ldd             0(%r25), %r19           /* start next loads */
 
 #else
@@ -391,7 +391,7 @@ ENTRY(copy_user_page_asm)
         stw             %r21, 56(%r26)
         stw             %r22, 60(%r26)
         ldo             64(%r26), %r26
-        ADDIB>,n        -1, %r1, 1b
+        addib,COND(>),n -1, %r1, 1b
         ldw             0(%r25), %r19
 #endif
         bv              %r0(%r2)
@@ -515,7 +515,7 @@ ENTRY(copy_user_page_asm)
         stw             %r21, 56(%r28)
         stw             %r22, 60(%r28)
         ldo             64(%r28), %r28
-        ADDIB>          -1, %r1,1b
+        addib,COND(>)           -1, %r1,1b
         ldo             64(%r29), %r29
 
         bv              %r0(%r2)
@@ -574,7 +574,7 @@ ENTRY(__clear_user_page_asm)
         std             %r0, 104(%r28)
         std             %r0, 112(%r28)
         std             %r0, 120(%r28)
-        ADDIB>          -1, %r1, 1b
+        addib,COND(>)           -1, %r1, 1b
         ldo             128(%r28), %r28
 
 #else   /* ! CONFIG_64BIT */
@@ -597,7 +597,7 @@ ENTRY(__clear_user_page_asm)
         stw             %r0, 52(%r28)
         stw             %r0, 56(%r28)
         stw             %r0, 60(%r28)
-        ADDIB>          -1, %r1, 1b
+        addib,COND(>)           -1, %r1, 1b
         ldo             64(%r28), %r28
 #endif  /* CONFIG_64BIT */
 
@@ -640,7 +640,7 @@ ENTRY(flush_kernel_dcache_page_asm)
         fdc,m           %r23(%r26)
         fdc,m           %r23(%r26)
         fdc,m           %r23(%r26)
-        CMPB<<          %r26, %r25,1b
+        cmpb,COND(<<)           %r26, %r25,1b
         fdc,m           %r23(%r26)
 
         sync
@@ -683,7 +683,7 @@ ENTRY(flush_user_dcache_page)
         fdc,m           %r23(%sr3, %r26)
         fdc,m           %r23(%sr3, %r26)
         fdc,m           %r23(%sr3, %r26)
-        CMPB<<          %r26, %r25,1b
+        cmpb,COND(<<)           %r26, %r25,1b
         fdc,m           %r23(%sr3, %r26)
 
         sync
@@ -726,7 +726,7 @@ ENTRY(flush_user_icache_page)
         fic,m           %r23(%sr3, %r26)
         fic,m           %r23(%sr3, %r26)
         fic,m           %r23(%sr3, %r26)
-        CMPB<<          %r26, %r25,1b
+        cmpb,COND(<<)           %r26, %r25,1b
         fic,m           %r23(%sr3, %r26)
 
         sync
@@ -769,7 +769,7 @@ ENTRY(purge_kernel_dcache_page)
         pdc,m           %r23(%r26)
         pdc,m           %r23(%r26)
         pdc,m           %r23(%r26)
-        CMPB<<          %r26, %r25, 1b
+        cmpb,COND(<<)           %r26, %r25, 1b
         pdc,m           %r23(%r26)
 
         sync
@@ -833,7 +833,7 @@ ENTRY(flush_alias_page)
         fdc,m           %r23(%r28)
         fdc,m           %r23(%r28)
         fdc,m           %r23(%r28)
-        CMPB<<          %r28, %r29, 1b
+        cmpb,COND(<<)           %r28, %r29, 1b
         fdc,m           %r23(%r28)
 
         sync
@@ -856,7 +856,7 @@ flush_user_dcache_range_asm:
         ldo             -1(%r23), %r21
         ANDCM           %r26, %r21, %r26
 
-1:      CMPB<<,n        %r26, %r25, 1b
+1:      cmpb,COND(<<),n %r26, %r25, 1b
         fdc,m           %r23(%sr3, %r26)
 
         sync
@@ -877,7 +877,7 @@ ENTRY(flush_kernel_dcache_range_asm)
         ldo             -1(%r23), %r21
         ANDCM           %r26, %r21, %r26
 
-1:      CMPB<<,n        %r26, %r25,1b
+1:      cmpb,COND(<<),n %r26, %r25,1b
         fdc,m           %r23(%r26)
 
         sync
@@ -899,7 +899,7 @@ ENTRY(flush_user_icache_range_asm)
         ldo             -1(%r23), %r21
         ANDCM           %r26, %r21, %r26
 
-1:      CMPB<<,n        %r26, %r25,1b
+1:      cmpb,COND(<<),n %r26, %r25,1b
         fic,m           %r23(%sr3, %r26)
 
         sync
@@ -942,7 +942,7 @@ ENTRY(flush_kernel_icache_page)
         fic,m           %r23(%sr4, %r26)
         fic,m           %r23(%sr4, %r26)
         fic,m           %r23(%sr4, %r26)
-        CMPB<<          %r26, %r25, 1b
+        cmpb,COND(<<)           %r26, %r25, 1b
         fic,m           %r23(%sr4, %r26)
 
         sync
@@ -963,7 +963,7 @@ ENTRY(flush_kernel_icache_range_asm)
         ldo             -1(%r23), %r21
         ANDCM           %r26, %r21, %r26
 
-1:      CMPB<<,n        %r26, %r25, 1b
+1:      cmpb,COND(<<),n %r26, %r25, 1b
         fic,m           %r23(%sr4, %r26)
 
         sync
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index 5b7fc4aa044d..0eecfbbc59cd 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -152,3 +152,6 @@ EXPORT_SYMBOL($$dyncall);
 EXPORT_SYMBOL(node_data);
 EXPORT_SYMBOL(pfnnid_map);
 #endif
+
+/* from pacache.S -- needed for copy_page */
+EXPORT_SYMBOL(copy_user_page_asm);
diff --git a/arch/parisc/kernel/perf_asm.S b/arch/parisc/kernel/perf_asm.S
index 43874ca3ed67..fa6ea99bb324 100644
--- a/arch/parisc/kernel/perf_asm.S
+++ b/arch/parisc/kernel/perf_asm.S
@@ -20,6 +20,8 @@
  */
 
 #include <asm/assembly.h>
+
+#include <linux/init.h>
 #include <linux/linkage.h>
 
 #ifdef CONFIG_64BIT
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index db94affe5c71..fb59852006de 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -289,7 +289,7 @@ setup_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __
                                 &sc->sc_iaoq[0], compat_reg);
                 
                 /* Store upper half */
-                compat_reg = (compat_uint_t)(regs->gr[32] >> 32);
+                compat_reg = (compat_uint_t)(regs->gr[31] >> 32);
                 err |= __put_user(compat_reg, &rf->rf_iaoq[0]);
                 DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg);
                 
@@ -299,7 +299,7 @@ setup_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __
                 DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n",
                                 &sc->sc_iaoq[1], compat_reg);
                 /* Store upper half */
-                compat_reg = (compat_uint_t)((regs->gr[32]+4) >> 32);
+                compat_reg = (compat_uint_t)((regs->gr[31]+4) >> 32);
                 err |= __put_user(compat_reg, &rf->rf_iaoq[1]);
                 DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg);
                 
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 9dc6dc42f9cf..675f1d098f05 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -275,7 +275,7 @@ KERN_CRIT "                     ||     ||\n");
 
         /* Wot's wrong wif bein' racy? */
         if (current->thread.flags & PARISC_KERNEL_DEATH) {
-                printk(KERN_CRIT "%s() recursion detected.\n", __FUNCTION__);
+                printk(KERN_CRIT "%s() recursion detected.\n", __func__);
                 local_irq_enable();
                 while (1);
         }
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index aebf3c168871..e6f4b7a4b7e3 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -30,7 +30,7 @@
 /* #define DEBUG_UNALIGNED 1 */
 
 #ifdef DEBUG_UNALIGNED
-#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __FUNCTION__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
+#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __func__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
 #else
 #define DPRINTF(fmt, args...)
 #endif
@@ -460,7 +460,8 @@ void handle_unaligned(struct pt_regs *regs)
                         goto force_sigbus;
                 }
 
-                if (unaligned_count > 5 && jiffies - last_time > 5*HZ) {
+                if (unaligned_count > 5 &&
+                                time_after(jiffies, last_time + 5 * HZ)) {
                         unaligned_count = 0;
                         last_time = jiffies;
                 }
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 50b4a3a25d0a..2e516b871752 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -50,6 +50,7 @@ SECTIONS
 
         _text = .;              /* Text and read-only data */
         .text ALIGN(16) : {
+                HEAD_TEXT
                 TEXT_TEXT
                 SCHED_TEXT
                 LOCK_TEXT
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index d22042d33100..2d68431fc22e 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -91,7 +91,7 @@ DECLARE_PER_CPU(struct exception_data, exception_data);
 #define THRESHOLD       16
 
 #ifdef DEBUG_MEMCPY
-#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __FUNCTION__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
+#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __func__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
 #else
 #define DPRINTF(fmt, args...)
 #endif
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 1f012843150f..ce0da689a89d 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -547,6 +547,7 @@ void __init mem_init(void)
 }
 
 unsigned long *empty_zero_page __read_mostly;
+EXPORT_SYMBOL(empty_zero_page);
 
 void show_mem(void)
 {
@@ -555,8 +556,6 @@ void show_mem(void)
 
         printk(KERN_INFO "Mem-info:\n");
         show_free_areas();
-        printk(KERN_INFO "Free swap:     %6ldkB\n",
-                                nr_swap_pages<<(PAGE_SHIFT-10));
 #ifndef CONFIG_DISCONTIGMEM
         i = max_mapnr;
         while (i-- > 0) {
@@ -606,7 +605,7 @@ void show_mem(void)
                 int i, j;
 
                 for (i = 0; i < npmem_ranges; i++) {
-                        zl = node_zonelist(i);
+                        zl = node_zonelist(i, 0);
                         for (j = 0; j < MAX_NR_ZONES; j++) {
                                 struct zoneref *z;
                                 struct zone *zone;
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 9dcdc036cdf7..b7d4c4ce2fe6 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -96,6 +96,8 @@ endif
 else
         KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
 endif
+else
+LDFLAGS_MODULE  += arch/powerpc/lib/crtsavres.o
 endif
 
 ifeq ($(CONFIG_TUNE_CELL),y)
@@ -154,7 +156,7 @@ all: zImage
 
 CPPFLAGS_vmlinux.lds    := -Upowerpc
 
-BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.%
+BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
 
 PHONY += $(BOOT_TARGETS)
 
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2347294ff35b..2f50acd11a60 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -20,21 +20,19 @@ kernel-vmlinux.strip.gz
 mktree
 uImage
 cuImage.*
+dtbImage.*
 treeImage.*
 zImage
+zImage.initrd
 zImage.bin.*
 zImage.chrp
 zImage.coff
-zImage.coff.lds
-zImage.ep*
+zImage.holly
 zImage.iseries
 zImage.*lds
 zImage.miboot
 zImage.pmac
 zImage.pseries
-zImage.redboot*
-zImage.sandpoint
-zImage.vmode
 zconf.h
 zlib.h
 zutil.h
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 758edf1c5815..5c878436f348 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -21,6 +21,25 @@
 #include "reg.h"
 #include "dcr.h"
 
+static unsigned long chip_11_errata(unsigned long memsize)
+{
+        unsigned long pvr;
+
+        pvr = mfpvr();
+
+        switch (pvr & 0xf0000ff0) {
+                case 0x40000850:
+                case 0x400008d0:
+                case 0x200008d0:
+                        memsize -= 4096;
+                        break;
+                default:
+                        break;
+        }
+
+        return memsize;
+}
+
 /* Read the 4xx SDRAM controller to get size of system memory. */
 void ibm4xx_sdram_fixup_memsize(void)
 {
@@ -34,6 +53,7 @@ void ibm4xx_sdram_fixup_memsize(void)
                         memsize += SDRAM_CONFIG_BANK_SIZE(bank_config);
         }
 
+        memsize = chip_11_errata(memsize);
         dt_fixup_memory(0, memsize);
 }
 
@@ -199,6 +219,7 @@ void ibm4xx_denali_fixup_memsize(void)
                 bank = 4; /* 4 banks */
 
         memsize = cs * (1 << (col+row)) * bank * dpath;
+        memsize = chip_11_errata(memsize);
         dt_fixup_memory(0, memsize);
 }
 
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 7822d25c9d31..1cee2f9fdf06 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -51,7 +51,7 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
         $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
 
 src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
-src-wlib := string.S crt0.S stdio.c main.c \
+src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
                 $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
                 ns16550.c serial.c simple_alloc.c div64.S util.S \
                 gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
@@ -99,7 +99,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srct
         @cp $< $@
 
 clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
-                empty.c zImage zImage.coff.lds zImage.ps3.lds zImage.lds
+                empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
 
 quiet_cmd_bootcc = BOOTCC  $@
       cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
@@ -221,8 +221,8 @@ image-$(CONFIG_WARP)			+= cuImage.warp
 image-$(CONFIG_YOSEMITE)                += cuImage.yosemite
 
 # Board ports in arch/powerpc/platform/8xx/Kconfig
-image-$(CONFIG_PPC_MPC86XADS)           += cuImage.mpc866ads
-image-$(CONFIG_PPC_MPC885ADS)           += cuImage.mpc885ads
+image-$(CONFIG_MPC86XADS)               += cuImage.mpc866ads
+image-$(CONFIG_MPC885ADS)               += cuImage.mpc885ads
 image-$(CONFIG_PPC_EP88XC)              += dtbImage.ep88xc
 image-$(CONFIG_PPC_ADDER875)            += cuImage.adder875-uboot \
                                            dtbImage.adder875-redboot
@@ -339,7 +339,9 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
         sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
 
 # anything not in $(targets)
-clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
+clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
+        zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
+        zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
         otheros.bld *.dtb
 
 # clean up files cached by wrapper
diff --git a/arch/powerpc/boot/crtsavres.S b/arch/powerpc/boot/crtsavres.S
new file mode 100644
index 000000000000..f3d9b35c07d4
--- /dev/null
+++ b/arch/powerpc/boot/crtsavres.S
@@ -0,0 +1,233 @@
+/*
+ * Special support for eabi and SVR4
+ *
+ *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+ *   Copyright 2008 Freescale Semiconductor, Inc.
+ *   Written By Michael Meissner
+ *
+ * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * In addition to the permissions in the GNU General Public License, the
+ * Free Software Foundation gives you unlimited permission to link the
+ * compiled version of this file with other programs, and to distribute
+ * those programs without any restriction coming from the use of this
+ * file.  (The General Public License restrictions do apply in other
+ * respects; for example, they cover modification of the file, and
+ * distribution when not linked into another program.)
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ *    As a special exception, if you link this library with files
+ *    compiled with GCC to produce an executable, this does not cause
+ *    the resulting executable to be covered by the GNU General Public License.
+ *    This exception does not however invalidate any other reasons why
+ *    the executable file might be covered by the GNU General Public License.
+ */
+
+        .file   "crtsavres.S"
+        .section ".text"
+
+/* On PowerPC64 Linux, these functions are provided by the linker.  */
+#ifndef __powerpc64__
+
+#define _GLOBAL(name) \
+        .type name,@function; \
+        .globl name; \
+name:
+
+/* Routines for saving integer registers, called by the compiler.  */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer save area.  */
+
+_GLOBAL(_savegpr_14)
+_GLOBAL(_save32gpr_14)
+        stw     14,-72(11)      /* save gp registers */
+_GLOBAL(_savegpr_15)
+_GLOBAL(_save32gpr_15)
+        stw     15,-68(11)
+_GLOBAL(_savegpr_16)
+_GLOBAL(_save32gpr_16)
+        stw     16,-64(11)
+_GLOBAL(_savegpr_17)
+_GLOBAL(_save32gpr_17)
+        stw     17,-60(11)
+_GLOBAL(_savegpr_18)
+_GLOBAL(_save32gpr_18)
+        stw     18,-56(11)
+_GLOBAL(_savegpr_19)
+_GLOBAL(_save32gpr_19)
+        stw     19,-52(11)
+_GLOBAL(_savegpr_20)
+_GLOBAL(_save32gpr_20)
+        stw     20,-48(11)
+_GLOBAL(_savegpr_21)
+_GLOBAL(_save32gpr_21)
+        stw     21,-44(11)
+_GLOBAL(_savegpr_22)
+_GLOBAL(_save32gpr_22)
+        stw     22,-40(11)
+_GLOBAL(_savegpr_23)
+_GLOBAL(_save32gpr_23)
+        stw     23,-36(11)
+_GLOBAL(_savegpr_24)
+_GLOBAL(_save32gpr_24)
+        stw     24,-32(11)
+_GLOBAL(_savegpr_25)
+_GLOBAL(_save32gpr_25)
+        stw     25,-28(11)
+_GLOBAL(_savegpr_26)
+_GLOBAL(_save32gpr_26)
+        stw     26,-24(11)
+_GLOBAL(_savegpr_27)
+_GLOBAL(_save32gpr_27)
+        stw     27,-20(11)
+_GLOBAL(_savegpr_28)
+_GLOBAL(_save32gpr_28)
+        stw     28,-16(11)
+_GLOBAL(_savegpr_29)
+_GLOBAL(_save32gpr_29)
+        stw     29,-12(11)
+_GLOBAL(_savegpr_30)
+_GLOBAL(_save32gpr_30)
+        stw     30,-8(11)
+_GLOBAL(_savegpr_31)
+_GLOBAL(_save32gpr_31)
+        stw     31,-4(11)
+        blr
+
+/* Routines for restoring integer registers, called by the compiler.  */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area.  */
+
+_GLOBAL(_restgpr_14)
+_GLOBAL(_rest32gpr_14)
+        lwz     14,-72(11)      /* restore gp registers */
+_GLOBAL(_restgpr_15)
+_GLOBAL(_rest32gpr_15)
+        lwz     15,-68(11)
+_GLOBAL(_restgpr_16)
+_GLOBAL(_rest32gpr_16)
+        lwz     16,-64(11)
+_GLOBAL(_restgpr_17)
+_GLOBAL(_rest32gpr_17)
+        lwz     17,-60(11)
+_GLOBAL(_restgpr_18)
+_GLOBAL(_rest32gpr_18)
+        lwz     18,-56(11)
+_GLOBAL(_restgpr_19)
+_GLOBAL(_rest32gpr_19)
+        lwz     19,-52(11)
+_GLOBAL(_restgpr_20)
+_GLOBAL(_rest32gpr_20)
+        lwz     20,-48(11)
+_GLOBAL(_restgpr_21)
+_GLOBAL(_rest32gpr_21)
+        lwz     21,-44(11)
+_GLOBAL(_restgpr_22)
+_GLOBAL(_rest32gpr_22)
+        lwz     22,-40(11)
+_GLOBAL(_restgpr_23)
+_GLOBAL(_rest32gpr_23)
+        lwz     23,-36(11)
+_GLOBAL(_restgpr_24)
+_GLOBAL(_rest32gpr_24)
+        lwz     24,-32(11)
+_GLOBAL(_restgpr_25)
+_GLOBAL(_rest32gpr_25)
+        lwz     25,-28(11)
+_GLOBAL(_restgpr_26)
+_GLOBAL(_rest32gpr_26)
+        lwz     26,-24(11)
+_GLOBAL(_restgpr_27)
+_GLOBAL(_rest32gpr_27)
+        lwz     27,-20(11)
+_GLOBAL(_restgpr_28)
+_GLOBAL(_rest32gpr_28)
+        lwz     28,-16(11)
+_GLOBAL(_restgpr_29)
+_GLOBAL(_rest32gpr_29)
+        lwz     29,-12(11)
+_GLOBAL(_restgpr_30)
+_GLOBAL(_rest32gpr_30)
+        lwz     30,-8(11)
+_GLOBAL(_restgpr_31)
+_GLOBAL(_rest32gpr_31)
+        lwz     31,-4(11)
+        blr
+
+/* Routines for restoring integer registers, called by the compiler.  */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area.  */
+
+_GLOBAL(_restgpr_14_x)
+_GLOBAL(_rest32gpr_14_x)
+        lwz     14,-72(11)      /* restore gp registers */
+_GLOBAL(_restgpr_15_x)
+_GLOBAL(_rest32gpr_15_x)
+        lwz     15,-68(11)
+_GLOBAL(_restgpr_16_x)
+_GLOBAL(_rest32gpr_16_x)
+        lwz     16,-64(11)
+_GLOBAL(_restgpr_17_x)
+_GLOBAL(_rest32gpr_17_x)
+        lwz     17,-60(11)
+_GLOBAL(_restgpr_18_x)
+_GLOBAL(_rest32gpr_18_x)
+        lwz     18,-56(11)
+_GLOBAL(_restgpr_19_x)
+_GLOBAL(_rest32gpr_19_x)
+        lwz     19,-52(11)
+_GLOBAL(_restgpr_20_x)
+_GLOBAL(_rest32gpr_20_x)
+        lwz     20,-48(11)
+_GLOBAL(_restgpr_21_x)
+_GLOBAL(_rest32gpr_21_x)
+        lwz     21,-44(11)
+_GLOBAL(_restgpr_22_x)
+_GLOBAL(_rest32gpr_22_x)
+        lwz     22,-40(11)
+_GLOBAL(_restgpr_23_x)
+_GLOBAL(_rest32gpr_23_x)
+        lwz     23,-36(11)
+_GLOBAL(_restgpr_24_x)
+_GLOBAL(_rest32gpr_24_x)
+        lwz     24,-32(11)
+_GLOBAL(_restgpr_25_x)
+_GLOBAL(_rest32gpr_25_x)
+        lwz     25,-28(11)
+_GLOBAL(_restgpr_26_x)
+_GLOBAL(_rest32gpr_26_x)
+        lwz     26,-24(11)
+_GLOBAL(_restgpr_27_x)
+_GLOBAL(_rest32gpr_27_x)
+        lwz     27,-20(11)
+_GLOBAL(_restgpr_28_x)
+_GLOBAL(_rest32gpr_28_x)
+        lwz     28,-16(11)
+_GLOBAL(_restgpr_29_x)
+_GLOBAL(_rest32gpr_29_x)
+        lwz     29,-12(11)
+_GLOBAL(_restgpr_30_x)
+_GLOBAL(_rest32gpr_30_x)
+        lwz     30,-8(11)
+_GLOBAL(_restgpr_31_x)
+_GLOBAL(_rest32gpr_31_x)
+        lwz     0,4(11)
+        lwz     31,-4(11)
+        mtlr    0
+        mr      1,11
+        blr
+#endif
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index eac8e1b59496..fea592574004 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -268,6 +268,41 @@
                         interrupt-parent = <&ipic>;
                 };
 
+                dma@82a8 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+                        reg = <0x82a8 4>;
+                        ranges = <0 0x8100 0x1a8>;
+                        interrupt-parent = <&ipic>;
+                        interrupts = <0x47 8>;
+                        cell-index = <0>;
+                        dma-channel@0 {
+                                compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+                                reg = <0 0x80>;
+                                interrupt-parent = <&ipic>;
+                                interrupts = <0x47 8>;
+                        };
+                        dma-channel@80 {
+                                compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+                                reg = <0x80 0x80>;
+                                interrupt-parent = <&ipic>;
+                                interrupts = <0x47 8>;
+                        };
+                        dma-channel@100 {
+                                compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+                                reg = <0x100 0x80>;
+                                interrupt-parent = <&ipic>;
+                                interrupts = <0x47 8>;
+                        };
+                        dma-channel@180 {
+                                compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+                                reg = <0x180 0x28>;
+                                interrupt-parent = <&ipic>;
+                                interrupts = <0x47 8>;
+                        };
+                };
+
                 /* IPIC
                  * interrupts cell = <intr #, sense>
                  * sense values match linux IORESOURCE_IRQ_* defines:
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 5bc09ad016f5..f3083c779b66 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -164,12 +164,6 @@
                                 reg = <0x2>;
                                 device_type = "ethernet-phy";
                         };
-                        phy3: ethernet-phy@3 {
-                                interrupt-parent = <&ipic>;
-                                interrupts = <18 0x8>;
-                                reg = <0x3>;
-                                device_type = "ethernet-phy";
-                        };
                 };
 
                 enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
                         interrupts = <35 0x8 36 0x8 37 0x8>;
                         phy-connection-type = "mii";
                         interrupt-parent = <&ipic>;
-                        phy-handle = <&phy3>;
+                        fixed-link = <1 1 1000 0 0>;
                 };
 
                 serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 711f9a30f9ab..0e872a60e091 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -164,12 +164,6 @@
                                 reg = <0x2>;
                                 device_type = "ethernet-phy";
                         };
-                        phy3: ethernet-phy@3 {
-                                interrupt-parent = <&ipic>;
-                                interrupts = <18 0x8>;
-                                reg = <0x3>;
-                                device_type = "ethernet-phy";
-                        };
                 };
 
                 enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
                         interrupts = <35 0x8 36 0x8 37 0x8>;
                         phy-connection-type = "mii";
                         interrupt-parent = <&ipic>;
-                        phy-handle = <&phy3>;
+                        fixed-link = <1 1 1000 0 0>;
                 };
 
                 serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index c11ceb7d3299..1eb8defaff6f 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -164,12 +164,6 @@
                                 reg = <0x2>;
                                 device_type = "ethernet-phy";
                         };
-                        phy3: ethernet-phy@3 {
-                                interrupt-parent = <&ipic>;
-                                interrupts = <18 0x8>;
-                                reg = <0x3>;
-                                device_type = "ethernet-phy";
-                        };
                 };
 
                 enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
                         interrupts = <35 0x8 36 0x8 37 0x8>;
                         phy-connection-type = "mii";
                         interrupt-parent = <&ipic>;
-                        phy-handle = <&phy3>;
+                        fixed-link = <1 1 1000 0 0>;
                 };
 
                 serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index fa298a8c81cc..4811b8107415 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -409,7 +409,7 @@
                 interrupts = <26 2>;
                 bus-range = <0 255>;
                 ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-                          0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+                          0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
                 clock-frequency = <33333333>;
                 #interrupt-cells = <1>;
                 #size-cells = <2>;
@@ -428,7 +428,7 @@
 
                                   0x1000000 0x0 0x0
                                   0x1000000 0x0 0x0
-                                  0x0 0x8000000>;
+                                  0x0 0x100000>;
                 };
         };
 };
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index bba234eb14a9..fa9b6bbeb5af 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -46,9 +46,63 @@
                 reg = <0x00000000 0x20000000>;  // 512M at 0x0
         };
 
-        board-control@e8000000 {
-                compatible = "fsl,fpga-pixis";
-                reg = <0xe8000000 32>;          // pixis at 0xe8000000
+        localbus@e0005000 {
+                #address-cells = <2>;
+                #size-cells = <1>;
+                compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus";
+                reg = <0xe0005000 0x1000>;
+                interrupts = <19 2>;
+                interrupt-parent = <&mpic>;
+                ranges = <0 0 0xf8000000 0x08000000
+                          1 0 0xf0000000 0x08000000
+                          2 0 0xe8400000 0x00008000
+                          4 0 0xe8440000 0x00008000
+                          5 0 0xe8480000 0x00008000
+                          6 0 0xe84c0000 0x00008000
+                          3 0 0xe8000000 0x00000020>;
+
+                flash@0,0 {
+                        compatible = "cfi-flash";
+                        reg = <0 0 0x8000000>;
+                        bank-width = <2>;
+                        device-width = <1>;
+                };
+
+                flash@1,0 {
+                        compatible = "cfi-flash";
+                        reg = <1 0 0x8000000>;
+                        bank-width = <2>;
+                        device-width = <1>;
+                };
+
+                flash@2,0 {
+                        compatible = "fsl,mpc8610-fcm-nand",
+                                     "fsl,elbc-fcm-nand";
+                        reg = <2 0 0x8000>;
+                };
+
+                flash@4,0 {
+                        compatible = "fsl,mpc8610-fcm-nand",
+                                     "fsl,elbc-fcm-nand";
+                        reg = <4 0 0x8000>;
+                };
+
+                flash@5,0 {
+                        compatible = "fsl,mpc8610-fcm-nand",
+                                     "fsl,elbc-fcm-nand";
+                        reg = <5 0 0x8000>;
+                };
+
+                flash@6,0 {
+                        compatible = "fsl,mpc8610-fcm-nand",
+                                     "fsl,elbc-fcm-nand";
+                        reg = <6 0 0x8000>;
+                };
+
+                board-control@3,0 {
+                        compatible = "fsl,fpga-pixis";
+                        reg = <3 0 0x20>;
+                };
         };
 
         soc@e0000000 {
@@ -197,14 +251,14 @@
                 dma@c300 {
                         #address-cells = <1>;
                         #size-cells = <1>;
-                        compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
+                        compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
                         cell-index = <1>;
                         reg = <0xc300 0x4>; /* DMA general status register */
                         ranges = <0x0 0xc100 0x200>;
 
                         dma-channel@0 {
                                 compatible = "fsl,mpc8610-dma-channel",
-                                        "fsl,mpc8540-dma-channel";
+                                        "fsl,eloplus-dma-channel";
                                 cell-index = <0>;
                                 reg = <0x0 0x80>;
                                 interrupt-parent = <&mpic>;
@@ -212,7 +266,7 @@
                         };
                         dma-channel@1 {
                                 compatible = "fsl,mpc8610-dma-channel",
-                                        "fsl,mpc8540-dma-channel";
+                                        "fsl,eloplus-dma-channel";
                                 cell-index = <1>;
                                 reg = <0x80 0x80>;
                                 interrupt-parent = <&mpic>;
@@ -220,7 +274,7 @@
                         };
                         dma-channel@2 {
                                 compatible = "fsl,mpc8610-dma-channel",
-                                        "fsl,mpc8540-dma-channel";
+                                        "fsl,eloplus-dma-channel";
                                 cell-index = <2>;
                                 reg = <0x100 0x80>;
                                 interrupt-parent = <&mpic>;
@@ -228,7 +282,7 @@
                         };
                         dma-channel@3 {
                                 compatible = "fsl,mpc8610-dma-channel",
-                                        "fsl,mpc8540-dma-channel";
+                                        "fsl,eloplus-dma-channel";
                                 cell-index = <3>;
                                 reg = <0x180 0x80>;
                                 interrupt-parent = <&mpic>;
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index b86e65d926c1..22d967178fe9 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -52,6 +52,99 @@
                 reg = <0x00000000 0x10000000>;
         };
 
+        localbus@e0000000 {
+                #address-cells = <2>;
+                #size-cells = <1>;
+                compatible = "simple-bus";
+                reg = <0xe0000000 0x5000>;
+                interrupt-parent = <&mpic>;
+
+                ranges = <0x0 0x0 0xff800000 0x00800000         /*8MB Flash*/
+                          0x3 0x0 0xf0000000 0x04000000         /*64MB SDRAM*/
+                          0x4 0x0 0xf4000000 0x04000000         /*64MB SDRAM*/
+                          0x5 0x0 0xf8000000 0x00b10000         /* EPLD */
+                          0x6 0x0 0xfb800000 0x04000000>;       /*64MB Flash*/
+
+
+                flash@0,0 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "cfi-flash";
+                        reg = <0x0 0x0 0x800000>;
+                        bank-width = <1>;
+                        device-width = <1>;
+                        partition@0x0 {
+                                label = "space";
+                                reg = <0x00000000 0x00100000>;
+                        };
+                        partition@0x100000 {
+                                label = "bootloader";
+                                reg = <0x00100000 0x00700000>;
+                                read-only;
+                        };
+                };
+
+                epld@5,0 {
+                        compatible = "wrs,epld-localbus";
+                        #address-cells = <2>;
+                        #size-cells = <1>;
+                        reg = <0x5 0x0 0x00b10000>;
+                        ranges = <
+                                0x0 0x0 0x5 0x000000 0x1fff     /* LED */
+                                0x1 0x0 0x5 0x100000 0x1fff     /* Switches */
+                                0x3 0x0 0x5 0x300000 0x1fff     /* HW Rev. */
+                                0xb 0x0 0x5 0xb00000 0x1fff     /* EEPROM */
+                        >;
+
+                        led@0,0 {
+                                compatible = "led";
+                                reg = <0x0 0x0 0x1fff>;
+                        };
+
+                        switches@1,0 {
+                                compatible = "switches";
+                                reg = <0x1 0x0 0x1fff>;
+                        };
+
+                        hw-rev@3,0 {
+                                compatible = "hw-rev";
+                                reg = <0x3 0x0 0x1fff>;
+                        };
+
+                        eeprom@b,0 {
+                                compatible = "eeprom";
+                                reg = <0xb 0 0x1fff>;
+                        };
+
+                };
+
+                alt-flash@6,0 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0x6 0x0 0x04000000>;
+                        compatible = "cfi-flash";
+                        bank-width = <4>;
+                        device-width = <1>;
+                        partition@0x0 {
+                                label = "bootloader";
+                                reg = <0x00000000 0x00100000>;
+                                read-only;
+                        };
+                        partition@0x00100000 {
+                                label = "file-system";
+                                reg = <0x00100000 0x01f00000>;
+                        };
+                        partition@0x02000000 {
+                                label = "boot-config";
+                                reg = <0x02000000 0x00100000>;
+                        };
+                        partition@0x02100000 {
+                                label = "space";
+                                reg = <0x02100000 0x01f00000>;
+                        };
+                };
+        };
+
         soc8548@e0000000 {
                 #address-cells = <1>;
                 #size-cells = <1>;
@@ -59,6 +152,7 @@
                 ranges = <0x00000000 0xe0000000 0x00100000>;
                 reg = <0xe0000000 0x00001000>;  // CCSRBAR
                 bus-frequency = <0>;
+                compatible = "simple-bus";
 
                 memory-controller@2000 {
                         compatible = "fsl,8548-memory-controller";
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 7d18440e398f..5428f9f5ed85 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Fri Apr 11 11:10:09 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -196,7 +201,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -211,11 +215,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -239,6 +245,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -248,11 +255,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -300,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -362,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -445,6 +451,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -641,7 +648,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -661,6 +667,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -668,6 +675,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -724,6 +732,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -751,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -762,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -795,6 +796,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -804,17 +806,12 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -919,12 +916,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -977,16 +984,20 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1004,6 +1015,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1023,7 +1035,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1061,6 +1075,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1072,6 +1087,7 @@ CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -1090,6 +1106,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -1144,11 +1161,8 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1168,7 +1182,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1237,7 +1250,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1282,6 +1294,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1302,6 +1315,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1312,6 +1326,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1324,6 +1339,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1335,6 +1351,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1345,51 +1362,81 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 1f57456dd81e..9bc3a03ae264 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:15 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -238,6 +245,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -247,11 +255,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -299,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -361,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -444,6 +451,7 @@ CONFIG_MTD_NAND_IDS=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -549,7 +557,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -559,13 +571,11 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_FSL=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -605,6 +615,7 @@ CONFIG_SATA_FSL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
@@ -698,7 +709,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -718,6 +728,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -725,6 +736,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -781,6 +793,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -808,7 +821,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -819,13 +831,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -852,6 +857,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -861,17 +867,12 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -976,12 +977,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1034,16 +1045,20 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1061,6 +1076,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1080,7 +1096,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1118,6 +1136,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1129,6 +1148,7 @@ CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -1147,6 +1167,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -1201,11 +1222,8 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1225,7 +1243,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1294,7 +1311,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1339,6 +1355,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1351,6 +1368,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1358,6 +1376,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1368,6 +1387,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1380,6 +1400,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1391,6 +1412,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1401,51 +1423,81 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 50cceda8994f..1eca26f3659a 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:51 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:22 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -212,11 +217,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -239,6 +246,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -248,11 +256,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -300,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -355,6 +361,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -522,7 +529,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -546,6 +552,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -553,6 +560,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -600,6 +608,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -628,7 +637,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -639,13 +647,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -671,6 +672,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -680,19 +682,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -775,12 +771,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -811,6 +817,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -819,6 +827,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -870,11 +879,8 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -894,7 +900,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -952,7 +957,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -995,6 +999,7 @@ CONFIG_UCC=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1005,6 +1010,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1012,6 +1018,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1021,6 +1028,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1030,52 +1038,82 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index ac913025713e..de95d327463c 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:16 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:24 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -212,11 +217,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -239,6 +246,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -248,11 +256,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -300,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -355,6 +361,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -526,7 +533,6 @@ CONFIG_E1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -550,6 +556,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -557,6 +564,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -613,6 +621,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -653,13 +662,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -686,6 +688,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -695,17 +698,12 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -809,12 +807,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -867,16 +875,20 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -894,6 +906,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -913,7 +926,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -951,6 +966,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -962,6 +978,7 @@ CONFIG_MMC=y
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
@@ -972,14 +989,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -999,7 +1013,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1060,7 +1073,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1147,6 +1159,7 @@ CONFIG_UCC=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_ITU_T=y
@@ -1157,6 +1170,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1164,6 +1178,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1173,6 +1188,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1182,52 +1198,82 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index e1de399a7bdd..b47fc9185708 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:17 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:25 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -432,6 +438,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -541,7 +548,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -551,13 +562,11 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -598,6 +607,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
@@ -659,7 +669,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -679,6 +688,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -686,6 +696,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -722,6 +733,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -749,7 +761,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -760,13 +771,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -793,6 +797,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -802,17 +807,12 @@ CONFIG_I2C_MPC=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -862,12 +862,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -905,16 +915,20 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
@@ -925,6 +939,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -945,6 +960,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -982,10 +998,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -1040,11 +1058,8 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1064,7 +1079,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1126,7 +1140,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1210,6 +1223,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1220,6 +1234,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1227,6 +1242,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1236,6 +1252,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1245,51 +1262,81 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index b4e39cf82a8c..fdac4845bad9 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:18 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:26 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -432,6 +438,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -587,7 +594,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -607,6 +613,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -614,6 +621,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -650,6 +658,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -677,7 +686,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -688,13 +696,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -721,6 +722,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -730,17 +732,12 @@ CONFIG_I2C_MPC=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -790,12 +787,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -833,16 +840,20 @@ CONFIG_USB=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
@@ -853,6 +864,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -873,6 +885,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -909,10 +922,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -967,11 +982,8 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -991,7 +1003,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1053,7 +1064,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1137,6 +1147,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1147,6 +1158,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1154,6 +1166,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1163,6 +1176,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1172,51 +1186,81 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index b4e82c0e2be7..c82e96e984fc 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:56 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:26 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -353,6 +359,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -471,7 +478,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -491,6 +497,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -498,6 +505,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -544,6 +552,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -571,7 +580,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -582,13 +590,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -614,6 +615,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -623,19 +625,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -718,12 +714,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -754,6 +760,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -762,6 +770,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -813,11 +822,8 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -837,7 +843,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -895,7 +900,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -936,6 +940,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -946,6 +951,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -953,6 +959,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -962,6 +969,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -971,51 +979,81 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index d50a96eddcdc..20fd9f58cf42 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:57 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:27 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -353,6 +359,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,7 +527,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -544,6 +550,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -551,6 +558,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -598,6 +606,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -626,7 +635,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -637,13 +645,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -669,6 +670,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -678,19 +680,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -773,12 +769,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -809,6 +815,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -817,6 +825,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -868,11 +877,8 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -892,7 +898,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -950,7 +955,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -993,6 +997,7 @@ CONFIG_UCC=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1003,6 +1008,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1010,6 +1016,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1019,6 +1026,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1028,52 +1036,82 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index f377cde785b0..0f94d9f56beb 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:23 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:28 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -211,11 +216,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -234,6 +241,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -243,11 +251,11 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -295,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -350,6 +356,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -411,8 +418,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
 CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
@@ -459,6 +468,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -503,6 +513,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -537,13 +548,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 CONFIG_I2C_MPC=y
@@ -552,6 +556,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -561,19 +566,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -646,12 +645,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -680,6 +689,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -688,13 +699,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -714,7 +722,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -772,7 +779,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -817,6 +823,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -827,6 +834,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -834,6 +842,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -841,6 +850,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -850,50 +860,80 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index a6331769d88f..0d448556f53a 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:24 2008
+# Linux kernel version: 2.6.26-rc5
+# Tue Jun 10 09:17:12 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -211,11 +216,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -234,6 +241,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -243,11 +251,11 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -290,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -345,6 +351,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -352,6 +359,7 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
@@ -406,8 +414,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
 CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 # CONFIG_PATA_PLATFORM is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -444,7 +454,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -464,6 +474,16 @@ CONFIG_GFAR_NAPI=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -508,6 +528,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -542,13 +563,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 CONFIG_I2C_MPC=y
@@ -557,6 +571,8 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -566,19 +582,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -642,6 +652,11 @@ CONFIG_WATCHDOG=y
 CONFIG_83xx_WDT=y
 
 #
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
 # Sonics Silicon Backplane
 #
 CONFIG_SSB_POSSIBLE=y
@@ -651,13 +666,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -680,6 +706,14 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -695,33 +729,83 @@ CONFIG_USB=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
 #
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -741,7 +825,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -799,7 +882,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -844,6 +926,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -854,6 +937,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -861,6 +945,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -868,6 +953,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -881,50 +967,80 @@ CONFIG_ASYNC_CORE=y
 CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 1f1518229f6d..1752918be2c1 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:38 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:30 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -109,12 +112,14 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -209,11 +214,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -232,6 +239,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -241,11 +249,11 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -293,8 +301,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -348,6 +354,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -420,6 +427,7 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -464,6 +472,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -498,13 +507,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 CONFIG_I2C_MPC=y
@@ -513,6 +515,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -522,19 +525,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -607,12 +604,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -640,13 +647,10 @@ CONFIG_HID=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -659,7 +663,6 @@ CONFIG_HID=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -717,7 +720,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -746,6 +748,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -756,6 +759,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -763,6 +767,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -770,6 +775,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -779,50 +785,80 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 2d0debcefdbf..b82bb042308a 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Mon Feb 11 16:25:19 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:30 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -68,23 +70,22 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -92,6 +93,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -109,6 +111,8 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,7 +138,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # Platform support
@@ -191,12 +194,13 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -207,16 +211,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
 CONFIG_ISA_DMA_API=y
 
 #
@@ -229,6 +234,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -238,11 +244,12 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -290,8 +297,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -351,6 +356,8 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -430,17 +437,19 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 # CONFIG_BLK_DEV_IDEDISK is not set
@@ -457,7 +466,7 @@ CONFIG_IDE_PROC_FS=y
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -517,6 +526,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -561,6 +571,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -594,12 +605,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -615,6 +621,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -627,12 +634,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -660,19 +677,20 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -693,14 +711,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -743,15 +758,16 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -790,6 +806,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -800,6 +817,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -807,6 +825,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -817,7 +836,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -829,9 +850,9 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
@@ -841,6 +862,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -852,48 +874,78 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index b998539da86e..f33fd516fd54 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:25 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:31 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,6 +116,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -153,6 +157,7 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -208,11 +213,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -229,6 +236,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -238,11 +246,12 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -290,8 +299,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -419,6 +426,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -463,6 +471,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -494,12 +503,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -528,12 +532,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -561,6 +575,8 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -569,13 +585,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -595,7 +608,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -652,7 +664,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -691,6 +702,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -701,6 +713,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -708,6 +721,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -718,6 +732,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -730,6 +745,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -740,6 +756,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -750,47 +767,77 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index a9f113b243ae..042a85ea7b72 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:03 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:32 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -203,7 +208,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -219,11 +223,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -248,6 +254,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -257,11 +264,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -332,8 +340,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -395,6 +405,7 @@ CONFIG_FW_LOADER=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -501,7 +512,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -511,13 +526,11 @@ CONFIG_SATA_AHCI=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
 CONFIG_PATA_ALI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -557,6 +570,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -622,7 +636,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -642,6 +655,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -649,6 +663,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -713,6 +728,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -744,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -755,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -788,6 +796,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -797,19 +806,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -826,13 +829,33 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -875,14 +898,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # DVB-S (satellite) frontends
 #
-# CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_CX24110 is not set
 # CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
 
 #
 # DVB-T (terrestrial) frontends
@@ -900,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_DIB3000MC is not set
 # CONFIG_DVB_DIB7000M is not set
 # CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
 
 #
 # DVB-C (cable) frontends
@@ -918,27 +945,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
 # CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
 
 #
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
 # CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
 
 #
-# Miscellaneous devices
+# SEC control devices for DVB-S
 #
 # CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
 # CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1005,6 +1026,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1079,11 +1101,11 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
 #
 
 #
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -1118,16 +1140,20 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1145,6 +1171,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1164,7 +1191,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1202,10 +1231,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -1257,23 +1288,19 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 CONFIG_DMADEVICES=y
 
 #
 # DMA Devices
 #
 CONFIG_FSL_DMA=y
-# CONFIG_FSL_DMA_SELFTEST is not set
 CONFIG_DMA_ENGINE=y
 
 #
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1293,7 +1320,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1363,10 +1389,9 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1450,9 +1475,10 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1469,6 +1495,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1479,6 +1506,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1492,6 +1520,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1503,6 +1532,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1513,52 +1543,82 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 851ac9115617..e19592b42043 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:27 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:33 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,6 +116,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -153,6 +157,7 @@ CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -238,6 +245,7 @@ CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -247,11 +255,12 @@ CONFIG_PCI_DEBUG=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -299,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -462,7 +469,6 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -482,6 +488,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -489,6 +496,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -535,6 +543,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -572,12 +581,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -610,12 +614,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -646,6 +660,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -654,14 +670,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -681,7 +694,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -738,7 +750,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -777,6 +788,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -787,6 +799,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -794,6 +807,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -804,6 +818,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -816,6 +831,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -827,6 +843,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -837,49 +854,79 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 2b866b385607..28004e93aeee 100644
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:05 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:34 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -111,12 +114,14 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -156,6 +161,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 CONFIG_MPC85xx_MDS=y
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -212,11 +218,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -240,6 +248,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -249,11 +258,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -301,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -358,6 +366,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -525,7 +534,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -546,6 +554,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -553,6 +562,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -600,6 +610,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -629,7 +640,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -640,13 +650,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -672,6 +675,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -681,19 +685,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -776,12 +774,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -812,6 +820,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -820,6 +830,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -871,11 +882,8 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -895,7 +903,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -953,7 +960,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -994,6 +1000,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1004,6 +1011,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1011,6 +1019,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1021,6 +1030,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1033,6 +1043,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1045,6 +1056,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_DEBUGGER=y
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_PPC_EARLY_DEBUG_LPAR is not set
@@ -1066,52 +1078,82 @@ CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 53aa6f3173a5..03627cfebcb4 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:06 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -162,6 +167,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 CONFIG_MPC85xx_DS=y
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -217,11 +223,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -246,6 +254,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -255,11 +264,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -330,8 +340,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -393,6 +405,7 @@ CONFIG_FW_LOADER=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -499,7 +512,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -509,13 +526,11 @@ CONFIG_SATA_AHCI=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
 CONFIG_PATA_ALI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -555,6 +570,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -620,7 +636,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -640,6 +655,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -647,6 +663,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -711,6 +728,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -742,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -753,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -786,6 +796,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -795,19 +806,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -824,13 +829,33 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -873,14 +898,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # DVB-S (satellite) frontends
 #
-# CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_CX24110 is not set
 # CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
 
 #
 # DVB-T (terrestrial) frontends
@@ -898,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_DIB3000MC is not set
 # CONFIG_DVB_DIB7000M is not set
 # CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
 
 #
 # DVB-C (cable) frontends
@@ -916,27 +945,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
 # CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
 
 #
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
 # CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
 
 #
-# Miscellaneous devices
+# SEC control devices for DVB-S
 #
 # CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
 # CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1003,6 +1026,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1077,11 +1101,11 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
 #
 
 #
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -1116,16 +1140,20 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1143,6 +1171,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1162,7 +1191,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1200,10 +1231,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -1255,11 +1288,8 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1279,7 +1309,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1349,10 +1378,9 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1436,9 +1464,10 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1447,6 +1476,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1454,6 +1484,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1464,6 +1495,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1477,6 +1509,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1488,6 +1521,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1498,52 +1532,82 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index a469fe918816..b09f0032a10b 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:30 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:36 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,6 +116,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -153,6 +157,7 @@ CONFIG_MPC85xx=y
 CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -208,11 +213,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -236,6 +243,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -245,11 +253,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -297,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -437,7 +444,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -515,7 +522,6 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -535,6 +541,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -542,6 +549,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -588,6 +596,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -624,12 +633,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -662,12 +666,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -698,6 +712,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -706,14 +722,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -733,7 +746,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -790,7 +802,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -829,6 +840,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -839,6 +851,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -846,6 +859,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -856,6 +870,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -868,6 +883,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -878,6 +894,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -888,48 +905,78 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 67f67978c742..24f7f44b4821 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:39 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -111,6 +114,7 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -206,11 +211,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -233,6 +240,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -242,11 +250,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -294,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -449,7 +456,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -469,6 +475,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -476,6 +483,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -522,6 +530,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -558,12 +567,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -596,12 +600,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -628,14 +642,11 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -648,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -705,7 +715,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -732,6 +741,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -742,6 +752,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -749,6 +760,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -756,6 +768,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -765,48 +778,78 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index fef605579e29..655518dcd73f 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:39 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:38 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -112,6 +115,7 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -152,6 +156,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -207,11 +212,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -228,6 +235,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -237,11 +245,12 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -289,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -418,6 +425,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -462,6 +470,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -487,17 +496,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -526,12 +529,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -559,6 +572,8 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -567,6 +582,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -602,11 +618,8 @@ CONFIG_RTC_DRV_M48T59=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -619,7 +632,6 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -676,7 +688,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -715,6 +726,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -725,6 +737,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -732,6 +745,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -742,6 +756,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -753,6 +768,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -763,6 +779,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_PPC_EARLY_DEBUG_LPAR is not set
@@ -784,47 +801,77 @@ CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 1d303c49bb0c..7804ca1ecc94 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:42 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:38 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,12 +117,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -158,6 +163,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -215,11 +221,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -243,6 +251,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -252,11 +261,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -304,8 +314,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -418,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
@@ -505,7 +514,7 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -653,7 +662,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -673,6 +681,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -680,6 +689,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -753,6 +763,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -796,13 +807,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
 
 #
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -829,6 +833,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -838,19 +843,13 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -920,12 +919,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -973,6 +982,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -981,15 +992,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1009,7 +1017,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1073,7 +1080,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1141,9 +1147,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
@@ -1152,6 +1159,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1159,6 +1167,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1169,6 +1178,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1182,6 +1192,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1194,6 +1205,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1204,50 +1216,80 @@ CONFIG_BDI_SWITCH=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index d39ee3b35bfc..e0b5559e84aa 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:43 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -111,6 +114,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 # CONFIG_TQM8541 is not set
@@ -171,7 +176,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_CPM2 is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -208,11 +212,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -233,6 +239,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -242,11 +249,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -294,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -352,6 +358,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -423,6 +430,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -506,7 +514,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -600,7 +608,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -620,6 +627,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -627,6 +635,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -673,6 +682,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -713,13 +723,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -744,6 +747,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -753,19 +757,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -835,12 +833,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -871,6 +879,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -879,14 +889,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -906,7 +913,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -974,7 +980,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1013,6 +1018,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1025,6 +1031,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1032,6 +1039,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1041,6 +1049,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1050,48 +1059,78 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index cbf6ad2d71da..6f9067b49e07 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:44 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:40 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -111,6 +114,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 CONFIG_TQM8541=y
@@ -209,11 +214,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -675,6 +685,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1035,6 +1042,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index bbff962c8472..03120b5b52fa 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:44 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:41 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -111,6 +114,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -209,11 +214,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -675,6 +685,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1035,6 +1042,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 63c5ec8b6515..3113257edf5a 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:45 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:42 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -111,6 +114,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -209,11 +214,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -675,6 +685,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1035,6 +1042,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index a3cc94a2ff06..6740f2a3aa3d 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Wed Feb 20 12:26:07 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:08 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +77,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -107,6 +110,8 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
@@ -131,7 +136,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # Platform support
@@ -194,7 +198,6 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -213,11 +216,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -235,6 +240,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_QSPAN is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,13 +250,13 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
 
 #
 # Networking
@@ -293,8 +299,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -482,6 +486,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -548,6 +553,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -580,12 +586,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -602,12 +603,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -632,12 +643,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -650,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
@@ -708,7 +716,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -751,6 +758,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Library routines
 #
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -761,6 +769,7 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -768,6 +777,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -778,6 +788,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -788,6 +799,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -798,6 +810,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -811,3 +824,4 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index d7fd298bd234..05360d4ef1b1 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:37 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:00:44 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -88,6 +90,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -95,6 +98,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -115,12 +119,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -217,11 +223,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -245,6 +253,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -254,11 +263,11 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -299,8 +308,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -398,6 +405,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 # CONFIG_PNP is not set
 CONFIG_BLK_DEV=y
@@ -484,22 +492,8 @@ CONFIG_BLK_DEV_SL82C105=y
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -641,7 +635,6 @@ CONFIG_DE4X5=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_AC3200 is not set
@@ -684,7 +677,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -703,6 +695,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -710,6 +703,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -813,6 +807,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -853,13 +848,7 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -890,6 +879,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -899,19 +889,13 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -928,12 +912,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -953,8 +947,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 CONFIG_FB_BACKLIGHT=y
@@ -1072,11 +1066,13 @@ CONFIG_USB_DEVICE_CLASS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1112,6 +1108,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1153,14 +1150,11 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1180,7 +1174,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1314,6 +1307,7 @@ CONFIG_NLS_ISO8859_1=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1334,6 +1328,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1344,6 +1339,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1357,6 +1353,7 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1371,6 +1368,7 @@ CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1382,50 +1380,80 @@ CONFIG_XMON_DISASSEMBLY=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 2b1504e0a111..ba2a463b9305 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:09 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:09 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -70,18 +72,16 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -107,6 +107,7 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -194,11 +195,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -215,6 +218,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -224,11 +228,11 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
 
 #
 # Networking
@@ -283,6 +287,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -498,6 +503,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -521,6 +527,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -552,12 +559,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -574,12 +576,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -603,12 +615,9 @@ CONFIG_DAB=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -675,7 +684,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -752,6 +760,7 @@ CONFIG_NLS_UTF8=y
 #
 # Library routines
 #
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -763,6 +772,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -770,6 +780,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -780,6 +791,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -791,6 +803,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -802,6 +815,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -811,45 +825,75 @@ CONFIG_BDI_SWITCH=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 125b4764aadd..ac72b48542dc 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:10 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:09 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -108,6 +110,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
@@ -212,11 +215,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -234,6 +239,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_QSPAN is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -243,13 +249,13 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
 
 #
 # Networking
@@ -292,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -481,6 +485,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -505,6 +510,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -537,12 +543,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -559,12 +560,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -588,13 +599,10 @@ CONFIG_DAB=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -607,7 +615,6 @@ CONFIG_DAB=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
@@ -665,7 +672,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -708,6 +714,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Library routines
 #
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -718,6 +725,7 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -725,6 +733,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -735,6 +744,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -745,6 +755,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -755,6 +766,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -767,3 +779,4 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 88338a9f5e95..0ccc6e493dcb 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:43 2008
+# Linux kernel version: 2.6.26-rc6
+# Mon Jun 16 21:08:31 2008
 #
 CONFIG_PPC64=y
 
@@ -29,6 +29,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -91,6 +94,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,12 +123,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -165,11 +171,11 @@ CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_IPIC is not set
@@ -190,6 +196,7 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -224,7 +231,6 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
 CONFIG_IOMMU_HELPER=y
@@ -248,12 +254,14 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 # CONFIG_PPC_HAS_HASH_64K is not set
 # CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -278,7 +286,10 @@ CONFIG_PCI_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
 
 #
 # Networking
@@ -325,8 +336,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -342,6 +351,7 @@ CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CT_ACCT is not set
 CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
 # CONFIG_NF_CT_PROTO_SCTP is not set
 # CONFIG_NF_CT_PROTO_UDPLITE is not set
 # CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -418,6 +428,7 @@ CONFIG_FW_LOADER=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -465,7 +476,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -506,7 +516,7 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -584,7 +594,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 CONFIG_SATA_SVW=y
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -594,7 +607,6 @@ CONFIG_SATA_SVW=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -639,6 +651,7 @@ CONFIG_SATA_SVW=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
@@ -740,7 +753,6 @@ CONFIG_E1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -755,10 +767,10 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 CONFIG_TR=y
 CONFIG_IBMOL=y
 # CONFIG_3C359 is not set
@@ -769,6 +781,7 @@ CONFIG_IBMOL=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -865,6 +878,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -895,13 +909,7 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -930,6 +938,7 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -939,19 +948,13 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -968,12 +971,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -995,8 +1008,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 CONFIG_FB_BACKLIGHT=y
@@ -1112,6 +1125,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1198,11 +1212,11 @@ CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
 #
 
 #
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -1222,6 +1236,7 @@ CONFIG_USB_HID=y
 CONFIG_HID_FF=y
 CONFIG_HID_PID=y
 CONFIG_LOGITECH_FF=y
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_THRUSTMASTER_FF=y
 # CONFIG_ZEROPLUS_FF is not set
@@ -1245,11 +1260,13 @@ CONFIG_USB_DEVICE_CLASS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1267,6 +1284,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1288,6 +1306,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1342,9 +1361,11 @@ CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
@@ -1379,18 +1400,16 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1420,9 +1439,9 @@ CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1488,13 +1507,11 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
@@ -1583,9 +1600,10 @@ CONFIG_NLS_UTF8=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1603,6 +1621,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1613,18 +1632,23 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1648,53 +1672,83 @@ CONFIG_BOOTX_TEXT=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index b3128fb7ce7e..63f0bdb6340d 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:45 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:01:36 2008
 #
 CONFIG_PPC64=y
 
@@ -30,6 +30,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -91,6 +94,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -118,12 +122,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -172,11 +178,11 @@ CONFIG_VIOPATH=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -212,7 +218,6 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -234,12 +239,14 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 # CONFIG_PPC_HAS_HASH_64K is not set
 # CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -263,7 +270,10 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
 
 #
 # Networking
@@ -310,8 +320,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -327,6 +335,7 @@ CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CT_ACCT is not set
 CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
 # CONFIG_NF_CT_PROTO_SCTP is not set
 # CONFIG_NF_CT_PROTO_UDPLITE is not set
 # CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -631,7 +640,6 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-CONFIG_PCNET32_NAPI=y
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -667,7 +675,6 @@ CONFIG_E1000=m
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -682,10 +689,10 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 CONFIG_TR=y
 CONFIG_IBMOL=y
 # CONFIG_3C359 is not set
@@ -696,6 +703,7 @@ CONFIG_IBMOL=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_ISERIES_VETH=y
 # CONFIG_FDDI is not set
@@ -762,6 +770,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -793,12 +802,7 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -815,12 +819,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -854,14 +868,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -895,9 +906,9 @@ CONFIG_JFS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 CONFIG_GFS2_FS=m
 CONFIG_GFS2_FS_LOCKING_NOLOCK=m
 CONFIG_GFS2_FS_LOCKING_DLM=m
@@ -966,13 +977,11 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1047,9 +1056,10 @@ CONFIG_DLM=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1071,6 +1081,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1081,18 +1092,23 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1116,53 +1132,83 @@ CONFIG_IRQSTACKS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 # CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 22a943afc3c0..48434c2c7628 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:10 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:10 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -91,6 +93,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -118,12 +121,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -223,11 +228,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -251,6 +258,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -260,11 +268,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -313,8 +321,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -329,6 +335,7 @@ CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CT_ACCT is not set
 # CONFIG_NF_CONNTRACK_MARK is not set
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 # CONFIG_NF_CT_PROTO_UDPLITE is not set
@@ -407,6 +414,7 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 # CONFIG_IP_NF_TARGET_NETMAP is not set
 # CONFIG_NF_NAT_SNMP_BASIC is not set
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -459,8 +467,6 @@ CONFIG_IEEE80211_DEBUG=y
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -486,6 +492,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -565,6 +572,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -670,7 +678,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -680,13 +692,11 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -726,6 +736,7 @@ CONFIG_PATA_SIL680=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -785,7 +796,6 @@ CONFIG_R8169=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -805,6 +815,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -812,6 +823,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -886,6 +898,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -913,7 +926,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -924,13 +936,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -957,6 +962,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -966,19 +972,13 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -1048,12 +1048,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -1115,12 +1125,14 @@ CONFIG_USB_DEVICE_CLASS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1138,6 +1150,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1159,6 +1172,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1202,9 +1216,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1238,10 +1254,12 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -1293,11 +1311,8 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1318,10 +1333,9 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1388,12 +1402,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1467,9 +1479,10 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1481,6 +1494,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1488,6 +1502,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1498,6 +1513,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1510,6 +1526,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1521,6 +1538,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1532,52 +1550,82 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index a3d52e3f2ded..066c583c1f8a 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:11 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -111,6 +114,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -209,11 +213,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -235,6 +241,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,11 +251,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -296,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -454,7 +459,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
@@ -464,7 +472,6 @@ CONFIG_SATA_MV=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -509,6 +516,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -596,7 +604,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -616,6 +623,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -623,6 +631,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -670,6 +679,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -705,12 +715,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -743,12 +748,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -779,6 +794,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -787,14 +804,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -814,7 +828,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -871,7 +884,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -914,6 +926,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -924,6 +937,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -931,6 +945,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -940,6 +955,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -950,48 +966,78 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 0264c5757f78..30d7834b7db1 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:13 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:12 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -70,18 +72,16 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -108,6 +108,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -196,11 +197,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -224,6 +227,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -233,11 +237,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
 
 #
 # Networking
@@ -292,6 +296,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -536,7 +541,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -554,6 +558,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -561,6 +566,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 CONFIG_PPP=y
@@ -634,6 +640,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -668,12 +675,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -690,12 +692,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -722,13 +734,10 @@ CONFIG_DAB=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -798,7 +807,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -877,6 +885,7 @@ CONFIG_NLS_UTF8=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -889,6 +898,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -896,6 +906,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -906,6 +917,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -918,6 +930,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -929,6 +942,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -938,45 +952,75 @@ CONFIG_BDI_SWITCH=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 9e0dd8201691..4293c8be06e1 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc9
-# Tue Apr 15 18:07:36 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -201,7 +206,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -217,11 +221,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -240,6 +246,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -249,11 +256,11 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -301,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -361,6 +366,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -439,6 +445,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -501,8 +508,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
 CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
@@ -554,6 +563,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -607,6 +617,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -642,13 +653,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 CONFIG_I2C_MPC=y
@@ -658,6 +662,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -667,19 +672,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -757,12 +756,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -810,16 +819,20 @@ CONFIG_USB=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
@@ -828,6 +841,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -873,17 +887,15 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -903,7 +915,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -962,7 +973,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1009,6 +1019,7 @@ CONFIG_UCC=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1027,6 +1038,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1034,6 +1046,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1043,51 +1056,81 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 2075722911bb..3efab71a603b 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:08 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 09:03:46 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -162,6 +167,7 @@ CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
 CONFIG_MPC85xx_MDS=y
 CONFIG_MPC85xx_DS=y
+CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
@@ -221,11 +227,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -250,6 +258,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -259,11 +268,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -334,8 +344,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -397,6 +409,7 @@ CONFIG_FW_LOADER=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -503,7 +516,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -513,13 +530,11 @@ CONFIG_SATA_AHCI=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
 CONFIG_PATA_ALI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -559,6 +574,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -625,7 +641,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -646,6 +661,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -653,6 +669,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -717,6 +734,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -750,7 +768,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -761,13 +778,6 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -794,6 +804,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -803,19 +814,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -832,13 +837,33 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -881,14 +906,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # DVB-S (satellite) frontends
 #
-# CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_CX24110 is not set
 # CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
 
 #
 # DVB-T (terrestrial) frontends
@@ -906,6 +934,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_DIB3000MC is not set
 # CONFIG_DVB_DIB7000M is not set
 # CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
 
 #
 # DVB-C (cable) frontends
@@ -924,27 +953,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
 # CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
 
 #
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
 # CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
 
 #
-# Miscellaneous devices
+# SEC control devices for DVB-S
 #
 # CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
 # CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1011,6 +1034,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1085,11 +1109,11 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
 #
 
 #
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -1124,16 +1148,20 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1151,6 +1179,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1170,7 +1199,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1208,12 +1239,21 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1263,11 +1303,19 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_DMADEVICES is not set
+# CONFIG_RTC_DRV_PPC is not set
+CONFIG_DMADEVICES=y
 
 #
-# Userspace I/O
+# DMA Devices
 #
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
 # CONFIG_UIO is not set
 
 #
@@ -1287,7 +1335,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1357,10 +1404,9 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1444,9 +1490,10 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1455,6 +1502,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1462,6 +1510,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1472,6 +1521,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1485,6 +1535,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1497,6 +1548,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1507,53 +1559,83 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 9270afe7594d..5612d40d0463 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:33 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:50:24 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -60,9 +62,10 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -86,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -110,14 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
@@ -151,6 +163,7 @@ CONFIG_PPC_86xx=y
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_MPC8641_HPCN is not set
+# CONFIG_SBC8641D is not set
 CONFIG_MPC8610_HPCD=y
 CONFIG_MPC8610=y
 # CONFIG_IPIC is not set
@@ -199,11 +212,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -223,12 +238,14 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -238,11 +255,11 @@ CONFIG_PCI_DEBUG=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -303,8 +320,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -358,8 +377,95 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -418,6 +524,7 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -467,7 +574,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -477,13 +588,11 @@ CONFIG_SATA_AHCI=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
 CONFIG_PATA_ALI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -523,6 +632,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -542,102 +652,29 @@ CONFIG_DUMMY=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
+# CONFIG_TULIP is not set
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
+CONFIG_ULI526X=y
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_GIANFAR is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
@@ -645,6 +682,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -700,6 +738,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -741,13 +780,6 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -769,9 +801,11 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
 # CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -781,19 +815,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -810,12 +838,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -825,7 +863,56 @@ CONFIG_DAB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_FSL_DIU=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -839,6 +926,8 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 
 #
 # Sound
@@ -855,7 +944,7 @@ CONFIG_SND_PCM=y
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -882,6 +971,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -948,14 +1038,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_SOC=y
 
 #
-# SoC Audio support for SuperH
-#
-
-#
 # ALSA SoC audio for Freescale SOCs
 #
 CONFIG_SND_SOC_MPC8610=y
 CONFIG_SND_SOC_MPC8610_HPCD=y
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
 CONFIG_SND_SOC_CS4270=y
 CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
 
@@ -972,6 +1062,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -980,14 +1072,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1007,7 +1096,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
@@ -1051,6 +1139,7 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1064,10 +1153,9 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1151,6 +1239,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1161,6 +1250,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1168,6 +1258,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1178,6 +1269,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1191,9 +1283,11 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1201,6 +1295,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1211,48 +1306,80 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index d01dcdb70bd7..4a8171507391 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:11 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:15 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -162,6 +167,7 @@ CONFIG_PPC_86xx=y
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_MPC8641_HPCN=y
+# CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
 CONFIG_MPC8641=y
 # CONFIG_IPIC is not set
@@ -211,11 +217,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -240,6 +248,8 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -249,11 +259,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -324,8 +334,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -387,6 +399,7 @@ CONFIG_FW_LOADER=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -493,7 +506,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -503,13 +520,11 @@ CONFIG_SATA_AHCI=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
 CONFIG_PATA_ALI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -549,6 +564,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -614,7 +630,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -634,6 +649,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -641,6 +657,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -705,6 +722,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -736,7 +754,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -747,13 +764,6 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -780,6 +790,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -789,19 +800,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -818,13 +823,33 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -867,14 +892,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # DVB-S (satellite) frontends
 #
-# CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_CX24110 is not set
 # CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
 
 #
 # DVB-T (terrestrial) frontends
@@ -892,6 +920,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_DIB3000MC is not set
 # CONFIG_DVB_DIB7000M is not set
 # CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
 
 #
 # DVB-C (cable) frontends
@@ -910,27 +939,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
 # CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
 
 #
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
 # CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
 
 #
-# Miscellaneous devices
+# SEC control devices for DVB-S
 #
 # CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
 # CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -997,6 +1020,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1071,11 +1095,11 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
 #
 
 #
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -1110,16 +1134,20 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1137,6 +1165,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1156,7 +1185,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1194,10 +1225,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -1249,11 +1282,8 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1273,7 +1303,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1343,10 +1372,9 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1430,9 +1458,10 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1441,6 +1470,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1448,6 +1478,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1458,6 +1489,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1471,6 +1503,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1482,6 +1515,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1492,52 +1526,82 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 2d831db9ae5b..46fffbcd3f99 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:35 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -106,6 +108,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -210,11 +213,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -231,6 +236,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_PCI_QSPAN is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -240,13 +246,13 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
 
 #
 # Networking
@@ -294,8 +300,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -419,6 +423,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -485,6 +490,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -517,12 +523,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -551,12 +552,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -584,6 +595,8 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -592,13 +605,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -620,7 +630,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -678,7 +687,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -722,6 +730,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -733,6 +742,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -740,6 +750,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -748,6 +759,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -757,48 +769,78 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 82151b9bba26..9df78973005e 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:35 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:17 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -108,6 +110,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
@@ -219,11 +222,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -241,6 +246,7 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_QSPAN is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -250,13 +256,13 @@ CONFIG_FSL_SOC=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
 
 #
 # Networking
@@ -299,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -492,6 +496,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -516,6 +521,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -548,12 +554,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -570,12 +571,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -599,13 +610,10 @@ CONFIG_DAB=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -618,7 +626,6 @@ CONFIG_DAB=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
@@ -676,7 +683,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -719,6 +725,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Library routines
 #
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -729,6 +736,7 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -736,6 +744,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -746,6 +755,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -756,6 +766,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -766,6 +777,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -778,3 +790,4 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 09f306248f2e..199e5f59d7a6 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Tue Mar 25 10:25:48 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 27 16:08:06 2008
 #
 CONFIG_PPC64=y
 
@@ -29,6 +29,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -87,6 +90,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -115,12 +119,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -167,11 +173,11 @@ CONFIG_PPC_PASEMI=y
 CONFIG_PPC_PASEMI_IOMMU=y
 # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
 CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_IPIC is not set
@@ -192,6 +198,7 @@ CONFIG_CPU_FREQ_DEBUG=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -226,7 +233,6 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=9
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
 CONFIG_IOMMU_HELPER=y
@@ -249,12 +255,14 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_64K_PAGES=y
+CONFIG_FORCE_MAX_ZONEORDER=9
 # CONFIG_PPC_SUBPAGE_PROT is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -290,9 +298,12 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_ELECTRA_CF is not set
+CONFIG_ELECTRA_CF=y
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
 
 #
 # Networking
@@ -341,8 +352,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -473,6 +482,7 @@ CONFIG_MTD_NAND_PASEMI=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,7 +530,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 
 #
@@ -554,7 +563,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -632,7 +641,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
@@ -642,7 +654,6 @@ CONFIG_SATA_MV=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-CONFIG_SATA_SIL24=y
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -689,6 +700,7 @@ CONFIG_PATA_PCMCIA=y
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
@@ -791,7 +803,6 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -810,6 +821,7 @@ CONFIG_PASEMI_MAC=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -817,6 +829,7 @@ CONFIG_PASEMI_MAC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -890,6 +903,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -917,7 +931,6 @@ CONFIG_LEGACY_PTY_COUNT=4
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_PASEMI=y
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 
@@ -936,13 +949,7 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=y
-CONFIG_I2C_ALGOPCA=y
 
 #
 # I2C Hardware Bus support
@@ -971,6 +978,7 @@ CONFIG_I2C_PASEMI=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -980,19 +988,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -1062,12 +1064,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1094,8 +1106,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 CONFIG_FB_BACKLIGHT=y
@@ -1213,6 +1225,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1292,11 +1305,11 @@ CONFIG_SND_USB_USX2Y=y
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
 #
 
 #
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -1334,11 +1347,13 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1354,6 +1369,7 @@ CONFIG_USB_SL811_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1375,6 +1391,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1416,6 +1433,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
 
@@ -1475,10 +1493,6 @@ CONFIG_RTC_DRV_DS1307=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1576,12 +1590,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1665,9 +1677,10 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1677,6 +1690,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1684,6 +1698,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1694,18 +1709,23 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1735,53 +1755,83 @@ CONFIG_ASYNC_CORE=y
 CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index fca114252ac7..3688e4bb6fc2 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:21 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:02:24 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -91,6 +93,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,12 +122,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -185,6 +190,7 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -236,16 +242,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 CONFIG_PM_DEBUG=y
 # CONFIG_PM_VERBOSE is not set
 CONFIG_CAN_PM_TRACE=y
@@ -292,6 +299,7 @@ CONFIG_YENTA_TOSHIBA=y
 # CONFIG_I82092 is not set
 CONFIG_PCCARD_NONSTATIC=m
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -301,11 +309,11 @@ CONFIG_PCCARD_NONSTATIC=m
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -352,8 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -369,6 +375,7 @@ CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CT_ACCT is not set
 # CONFIG_NF_CONNTRACK_MARK is not set
 # CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_DCCP=m
 # CONFIG_NF_CT_PROTO_SCTP is not set
 # CONFIG_NF_CT_PROTO_UDPLITE is not set
 # CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -445,6 +452,7 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 # CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_PROTO_DCCP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -586,7 +594,6 @@ CONFIG_MAC80211=m
 # Rate control algorithm selection
 #
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
 # CONFIG_MAC80211_RC_DEFAULT_NONE is not set
 
 #
@@ -598,7 +605,7 @@ CONFIG_MAC80211_RC_DEFAULT_PID=y
 #
 CONFIG_MAC80211_RC_DEFAULT="pid"
 CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_SIMPLE is not set
+# CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
 # CONFIG_MAC80211_DEBUG is not set
@@ -607,7 +614,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -629,6 +635,7 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -720,7 +727,7 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -906,7 +913,6 @@ CONFIG_SUNGEM=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -940,7 +946,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -959,6 +964,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -992,6 +998,8 @@ CONFIG_P54_COMMON=m
 # CONFIG_P54_USB is not set
 # CONFIG_P54_PCI is not set
 # CONFIG_ATH5K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_IWL4965 is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
@@ -1110,6 +1118,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -1156,13 +1165,7 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -1192,6 +1195,7 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -1201,19 +1205,13 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1230,6 +1228,7 @@ CONFIG_BATTERY_PMU=y
 #
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
 CONFIG_SSB_B43_PCI_BRIDGE=y
@@ -1243,12 +1242,22 @@ CONFIG_SSB_DRIVER_PCICORE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -1276,8 +1285,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 CONFIG_FB_BACKLIGHT=y
@@ -1413,6 +1422,7 @@ CONFIG_SND_DUMMY=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1505,11 +1515,11 @@ CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
 #
 
 #
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -1543,17 +1553,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
 # CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1587,7 +1598,9 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1642,9 +1655,11 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1695,14 +1710,12 @@ CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_IDE_DISK=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1786,13 +1799,11 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1877,9 +1888,10 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1901,6 +1913,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1911,6 +1924,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1923,6 +1937,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1936,6 +1951,7 @@ CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1947,54 +1963,84 @@ CONFIG_BOOTX_TEXT=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 970282b1a004..ce250bc98584 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:24 2008
+# Linux kernel version: 2.6.26-rc6
+# Mon Jun 16 21:11:19 2008
 #
 CONFIG_PPC64=y
 
@@ -30,6 +30,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -82,6 +85,7 @@ CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 # CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
@@ -101,6 +105,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -108,6 +113,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -129,12 +135,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -194,11 +202,11 @@ CONFIG_PPC_PASEMI=y
 CONFIG_PPC_PASEMI_IOMMU=y
 # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
 CONFIG_PPC_PASEMI_MDIO=y
-CONFIG_PPC_CELLEB=y
 # CONFIG_PPC_PS3 is not set
 CONFIG_PPC_CELL=y
 CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
+CONFIG_PPC_CELLEB=y
 
 #
 # Cell Broadband Engine options
@@ -241,6 +249,7 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -277,7 +286,6 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
 CONFIG_IOMMU_HELPER=y
@@ -307,6 +315,7 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
@@ -314,6 +323,7 @@ CONFIG_BOUNCE=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -356,7 +366,10 @@ CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
 
 #
 # Networking
@@ -406,8 +419,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -423,6 +434,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 # CONFIG_NF_CT_PROTO_UDPLITE is not set
@@ -501,6 +513,7 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -571,6 +584,7 @@ CONFIG_FW_LOADER=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_FD=y
@@ -618,7 +632,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -661,7 +674,7 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -747,17 +760,19 @@ CONFIG_SCSI_DEBUG=m
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 CONFIG_ATA=y
 CONFIG_ATA_NONSTANDARD=y
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
 CONFIG_SATA_SVW=y
 # CONFIG_ATA_PIIX is not set
-CONFIG_SATA_MV=y
+# CONFIG_SATA_MV is not set
 # CONFIG_SATA_NV is not set
 # CONFIG_PDC_ADMA is not set
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-CONFIG_SATA_SIL24=y
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -791,7 +806,7 @@ CONFIG_SATA_SIL24=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
-CONFIG_PATA_PCMCIA=y
+# CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
@@ -801,10 +816,10 @@ CONFIG_PATA_PCMCIA=y
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
-CONFIG_PATA_WINBOND=y
-CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_OF_PLATFORM is not set
-CONFIG_PATA_SCC=y
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCC is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
@@ -866,6 +881,7 @@ CONFIG_WINDFARM=y
 CONFIG_WINDFARM_PM81=y
 CONFIG_WINDFARM_PM91=y
 CONFIG_WINDFARM_PM112=y
+CONFIG_WINDFARM_PM121=y
 # CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEVICES_MULTIQUEUE is not set
@@ -911,7 +927,6 @@ CONFIG_IBM_NEW_EMAC_TAH=y
 CONFIG_IBM_NEW_EMAC_EMAC4=y
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -947,7 +962,6 @@ CONFIG_E1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -969,6 +983,7 @@ CONFIG_PASEMI_MAC=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 CONFIG_TR=y
 CONFIG_IBMOL=y
 # CONFIG_3C359 is not set
@@ -979,6 +994,7 @@ CONFIG_IBMOL=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -1083,6 +1099,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -1121,8 +1138,6 @@ CONFIG_HVC_BEAT=y
 CONFIG_HVCS=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 
@@ -1141,13 +1156,7 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -1177,6 +1186,7 @@ CONFIG_I2C_PASEMI=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -1186,19 +1196,13 @@ CONFIG_I2C_PASEMI=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1215,12 +1219,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -1240,8 +1254,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 CONFIG_FB_BACKLIGHT=y
@@ -1363,6 +1377,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1455,11 +1470,11 @@ CONFIG_SND_AOA_SOUNDBUS_I2S=m
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
 #
 
 #
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -1497,12 +1512,14 @@ CONFIG_USB_DEVICE_CLASS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1517,6 +1534,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1538,6 +1556,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1575,10 +1594,12 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
 # CONFIG_INFINIBAND_USER_MAD is not set
 # CONFIG_INFINIBAND_USER_ACCESS is not set
@@ -1607,10 +1628,6 @@ CONFIG_EDAC_PASEMI=y
 # CONFIG_EDAC_CELL is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
@@ -1638,6 +1655,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1658,11 +1676,8 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_PPC=y
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1696,9 +1711,9 @@ CONFIG_JFS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1764,13 +1779,11 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1862,9 +1875,10 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1888,6 +1902,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1898,18 +1913,23 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1941,53 +1961,83 @@ CONFIG_ASYNC_CORE=y
 CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 1383eb696a20..bc3bf62ddc2f 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:36 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -70,19 +72,17 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -109,6 +109,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -196,11 +197,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -225,6 +228,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -234,11 +238,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
 
 #
 # Networking
@@ -293,6 +297,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -513,7 +518,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -593,7 +598,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -611,6 +615,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -618,6 +623,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 CONFIG_PPP=y
@@ -692,6 +698,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -726,12 +733,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -748,12 +750,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -781,11 +793,14 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -795,6 +810,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_PXA2XX is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -804,6 +820,7 @@ CONFIG_USB_M66592=y
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
@@ -812,13 +829,10 @@ CONFIG_USB_ETH=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -888,7 +902,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -967,6 +980,7 @@ CONFIG_NLS_UTF8=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -979,6 +993,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -986,6 +1001,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -996,6 +1012,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1008,6 +1025,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1019,6 +1037,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1028,46 +1047,76 @@ CONFIG_BDI_SWITCH=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index f9121685f11a..c6b83577c055 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:15 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -92,6 +94,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -117,6 +120,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -215,11 +219,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -241,6 +247,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -250,13 +257,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -304,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -364,6 +369,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -435,6 +441,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -519,7 +526,7 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -598,7 +605,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
@@ -608,7 +618,6 @@ CONFIG_SATA_MV=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -653,6 +662,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -744,7 +754,6 @@ CONFIG_E1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -763,6 +772,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -770,6 +780,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -832,6 +843,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -855,7 +867,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -866,13 +877,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -898,6 +902,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 CONFIG_I2C_MV64XXX=y
 
 #
@@ -908,19 +913,13 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -990,12 +989,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -1055,11 +1064,13 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1074,6 +1085,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1120,10 +1132,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -1175,11 +1189,8 @@ CONFIG_RTC_DRV_MAX6900=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1199,7 +1210,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1257,7 +1267,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1300,6 +1309,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1310,6 +1320,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1317,6 +1328,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1326,6 +1338,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1336,48 +1349,78 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 3e2593c60b12..adaa05fb0478 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:28 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:03:28 2008
 #
 CONFIG_PPC64=y
 
@@ -30,6 +30,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -81,6 +84,7 @@ CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
@@ -100,6 +104,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -107,6 +112,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -129,12 +135,14 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -178,11 +186,11 @@ CONFIG_LPARCFG=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
@@ -225,7 +233,6 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
 CONFIG_IOMMU_HELPER=y
@@ -255,6 +262,7 @@ CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 # CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
@@ -263,6 +271,7 @@ CONFIG_BOUNCE=y
 CONFIG_NODES_SPAN_OTHER_NODES=y
 # CONFIG_PPC_HAS_HASH_64K is not set
 # CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -291,7 +300,10 @@ CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
 
 #
 # Networking
@@ -338,8 +350,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -355,6 +365,7 @@ CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
 # CONFIG_NF_CT_PROTO_SCTP is not set
 CONFIG_NF_CT_PROTO_UDPLITE=m
 # CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -426,6 +437,7 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -492,6 +504,7 @@ CONFIG_FW_LOADER=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_SERIAL is not set
@@ -545,7 +558,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -584,7 +596,7 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -671,61 +683,10 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
 # CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-CONFIG_PATA_WINBOND=y
-# CONFIG_PATA_PLATFORM is not set
+# CONFIG_ATA_SFF is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
@@ -783,7 +744,6 @@ CONFIG_IBMVETH=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -820,7 +780,6 @@ CONFIG_E1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -829,7 +788,6 @@ CONFIG_TIGON3=y
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
-CONFIG_EHEA=m
 # CONFIG_IXGBE is not set
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
@@ -838,10 +796,10 @@ CONFIG_S2IO=m
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 CONFIG_TR=y
 CONFIG_IBMOL=y
 # CONFIG_3C359 is not set
@@ -852,6 +810,7 @@ CONFIG_IBMOL=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -956,6 +915,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -1000,13 +960,7 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -1035,6 +989,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -1044,19 +999,13 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1073,12 +1022,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -1098,8 +1057,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 CONFIG_FB_BACKLIGHT=y
@@ -1209,11 +1168,13 @@ CONFIG_USB_DEVICE_CLASS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1247,7 +1208,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1290,6 +1253,7 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
@@ -1312,10 +1276,6 @@ CONFIG_INFINIBAND_SRP=m
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1349,11 +1309,12 @@ CONFIG_JFS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1419,13 +1380,11 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
@@ -1500,9 +1459,10 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
@@ -1526,6 +1486,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1536,18 +1497,23 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1577,53 +1543,83 @@ CONFIG_VIRQ_DEBUG=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
index 3180125aa6c4..8227510b41a9 100644
--- a/arch/powerpc/configs/sbc8641d_defconfig
+++ b/arch/powerpc/configs/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Apr 10 18:03:25 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:19 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -116,12 +119,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -197,7 +202,6 @@ CONFIG_PREEMPT=y
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -213,11 +217,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -237,12 +243,14 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -252,11 +260,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -328,8 +336,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -534,6 +544,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -610,6 +621,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -727,7 +739,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -743,6 +754,7 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_ATM_DRIVERS=y
 # CONFIG_ATM_DUMMY is not set
@@ -825,6 +837,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -863,13 +876,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -895,6 +901,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -904,19 +911,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -998,12 +999,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -1041,6 +1052,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1049,14 +1062,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1084,8 +1094,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1145,7 +1155,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1221,6 +1230,7 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1241,6 +1251,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1251,6 +1262,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1262,6 +1274,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1274,6 +1287,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_DEBUGGER=y
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1289,54 +1303,84 @@ CONFIG_SECURITY_CAPABILITIES=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index fdbfd39a3aca..88f6aa8273be 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:19 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:20 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -85,6 +87,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -109,12 +112,14 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -214,11 +219,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
@@ -242,6 +249,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -251,11 +259,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -358,6 +364,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -433,6 +440,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -513,7 +521,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -638,7 +646,6 @@ CONFIG_R8169=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -654,6 +661,7 @@ CONFIG_R8169=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,6 +698,7 @@ CONFIG_R8169=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -717,7 +726,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -728,13 +736,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -761,6 +762,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -770,19 +772,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -799,12 +795,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -841,16 +847,20 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -865,6 +875,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -885,6 +896,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -922,10 +934,12 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -977,11 +991,8 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1002,10 +1013,9 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1138,6 +1148,7 @@ CONFIG_NLS_UTF8=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -1150,6 +1161,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1157,6 +1169,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1166,6 +1179,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1181,3 +1195,4 @@ CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index d14cebf62bb0..2346d271fbfd 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -105,6 +105,9 @@ PHONY += systbl_chk
 systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
         $(call cmd,systbl_chk)
 
+
+ifeq ($(CONFIG_PPC_MERGE),y)
+
 $(obj)/built-in.o:              prom_init_check
 
 quiet_cmd_prom_init_check = CALL    $<
@@ -114,4 +117,7 @@ PHONY += prom_init_check
 prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
         $(call cmd,prom_init_check)
 
+endif
+
+
 clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 81738a4b3c3a..e44d5530f0a6 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1484,6 +1484,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
                 .dcache_bsize           = 32,
                 .machine_check          = machine_check_e200,
                 .platform               = "ppc5554",
+        }
 #endif /* CONFIG_E200 */
 #ifdef CONFIG_E500
         {       /* e500 */
@@ -1533,6 +1534,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
                 .dcache_bsize           = 32,
                 .machine_check          = machine_check_e500,
                 .platform               = "powerpc",
+        }
 #endif /* CONFIG_E500 */
 #endif /* CONFIG_PPC32 */
 };
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index c2b9dc4fce5d..22b5d2c459a3 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -368,7 +368,12 @@ interrupt_base:
 
         rlwimi  r11,r13,0,26,31         /* Insert static perms */
 
-        rlwinm  r11,r11,0,20,15         /* Clear U0-U3 */
+        /*
+         * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
+         * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
+         * include/asm-powerpc/pgtable-ppc32.h for details).
+         */
+        rlwinm  r11,r11,0,20,10
 
         /* find the TLB index that caused the fault.  It has to be here. */
         tlbsx   r10, 0, r10
diff --git a/arch/powerpc/kernel/init_task.c b/arch/powerpc/kernel/init_task.c
index 941043ae040f..4c85b8d56478 100644
--- a/arch/powerpc/kernel/init_task.c
+++ b/arch/powerpc/kernel/init_task.c
@@ -8,7 +8,6 @@
 #include <asm/uaccess.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 2f73f705d564..bcc249d90c4d 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -1073,7 +1073,7 @@ static const struct file_operations virq_debug_fops = {
 static int __init irq_debugfs_init(void)
 {
         if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root,
-                                 NULL, &virq_debug_fops))
+                                 NULL, &virq_debug_fops) == NULL)
                 return -ENOMEM;
 
         return 0;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 52750745edfd..30eedfc5a566 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -189,7 +189,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 
         dev->cfg_size = pci_cfg_space_size(dev);
 
-        sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+        dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
                 dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
         dev->class = get_int_prop(node, "class-code", 0);
         dev->revision = get_int_prop(node, "revision-id", 0);
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index cf6b5a7d8b3f..d3ac631cbd26 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -8,7 +8,6 @@
 #include <linux/screen_info.h>
 #include <linux/vt_kern.h>
 #include <linux/nvram.h>
-#include <linux/console.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
@@ -160,7 +159,6 @@ EXPORT_SYMBOL(screen_info);
 EXPORT_SYMBOL(timer_interrupt);
 EXPORT_SYMBOL(irq_desc);
 EXPORT_SYMBOL(tb_ticks_per_jiffy);
-EXPORT_SYMBOL(console_drivers);
 EXPORT_SYMBOL(cacheable_memcpy);
 #endif
 
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 8e24fc1821e8..2c7e8e87f770 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,7 @@ WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush
 _end enter_prom memcpy memset reloc_offset __secondary_hold
 __secondary_hold_acknowledge __secondary_hold_spinloop __start
 strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2"
+reloc_got2 kernstart_addr"
 
 NM="$1"
 OBJ="$2"
@@ -48,6 +48,20 @@ do
                 fi
         done
 
+        # ignore register save/restore funcitons
+        if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+                OK=1
+        fi
+        if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
+                OK=1
+        fi
+        if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+                OK=1
+        fi
+        if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
+                OK=1
+        fi
+
         if [ $OK -eq 0 ]; then
                 ERROR=1
                 echo "Error: External symbol '$UNDEF' referenced" \
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index faeb8f207ea4..da7c058e3731 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -87,6 +87,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 #ifdef CONFIG_ALTIVEC
         elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful);
 #endif
+        unsigned long msr = regs->msr;
         long err = 0;
 
         flush_fp_to_thread(current);
@@ -102,7 +103,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
                 /* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
                  * contains valid data.
                  */
-                regs->msr |= MSR_VEC;
+                msr |= MSR_VEC;
         }
         /* We always copy to/from vrsave, it's 0 if we don't have or don't
          * use altivec.
@@ -114,6 +115,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
         err |= __put_user(&sc->gp_regs, &sc->regs);
         WARN_ON(!FULL_REGS(regs));
         err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
+        err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
         err |= __copy_to_user(&sc->fp_regs, &current->thread.fpr, FP_REGS_SIZE);
         err |= __put_user(signr, &sc->signal);
         err |= __put_user(handler, &sc->handler);
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index c21a626af676..ce245a850db2 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -142,7 +142,7 @@ static void dump_one_vdso_page(struct page *pg, struct page *upg)
         printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT),
                page_count(pg),
                pg->flags);
-        if (upg/* && pg != upg*/) {
+        if (upg && !IS_ERR(upg) /* && pg != upg*/) {
                 printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg)
                                                        << PAGE_SHIFT),
                        page_count(upg),
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index f5d7a5eab96e..75dff7cfa814 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -116,8 +116,6 @@ static void kvmppc_44x_shadow_release(struct kvm_vcpu *vcpu,
         struct tlbe *stlbe = &vcpu->arch.shadow_tlb[index];
         struct page *page = vcpu->arch.shadow_pages[index];
 
-        kunmap(vcpu->arch.shadow_pages[index]);
-
         if (get_tlb_v(stlbe)) {
                 if (kvmppc_44x_tlbe_is_writable(stlbe))
                         kvm_release_page_dirty(page);
@@ -144,18 +142,19 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid,
         stlbe = &vcpu->arch.shadow_tlb[victim];
 
         /* Get reference to new page. */
-        down_write(&current->mm->mmap_sem);
+        down_read(&current->mm->mmap_sem);
         new_page = gfn_to_page(vcpu->kvm, gfn);
         if (is_error_page(new_page)) {
-                printk(KERN_ERR "Couldn't get guest page!\n");
+                printk(KERN_ERR "Couldn't get guest page for gfn %lx!\n", gfn);
                 kvm_release_page_clean(new_page);
+                up_read(&current->mm->mmap_sem);
                 return;
         }
         hpaddr = page_to_phys(new_page);
 
         /* Drop reference to old page. */
         kvmppc_44x_shadow_release(vcpu, victim);
-        up_write(&current->mm->mmap_sem);
+        up_read(&current->mm->mmap_sem);
 
         vcpu->arch.shadow_pages[victim] = new_page;
 
diff --git a/arch/powerpc/kvm/booke_guest.c b/arch/powerpc/kvm/booke_guest.c
index 712d89a28c46..9c8ad850c6e3 100644
--- a/arch/powerpc/kvm/booke_guest.c
+++ b/arch/powerpc/kvm/booke_guest.c
@@ -227,39 +227,6 @@ void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu)
         }
 }
 
-static int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu)
-{
-        enum emulation_result er;
-        int r;
-
-        er = kvmppc_emulate_instruction(run, vcpu);
-        switch (er) {
-        case EMULATE_DONE:
-                /* Future optimization: only reload non-volatiles if they were
-                 * actually modified. */
-                r = RESUME_GUEST_NV;
-                break;
-        case EMULATE_DO_MMIO:
-                run->exit_reason = KVM_EXIT_MMIO;
-                /* We must reload nonvolatiles because "update" load/store
-                 * instructions modify register state. */
-                /* Future optimization: only reload non-volatiles if they were
-                 * actually modified. */
-                r = RESUME_HOST_NV;
-                break;
-        case EMULATE_FAIL:
-                /* XXX Deliver Program interrupt to guest. */
-                printk(KERN_EMERG "%s: emulation failed (%08x)\n", __func__,
-                       vcpu->arch.last_inst);
-                r = RESUME_HOST;
-                break;
-        default:
-                BUG();
-        }
-
-        return r;
-}
-
 /**
  * kvmppc_handle_exit
  *
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index a03fe0c80698..000097461283 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -246,6 +246,11 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
         case 31:
                 switch (get_xop(inst)) {
 
+                case 23:                                        /* lwzx */
+                        rt = get_rt(inst);
+                        emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
+                        break;
+
                 case 83:                                        /* mfmsr */
                         rt = get_rt(inst);
                         vcpu->arch.gpr[rt] = vcpu->arch.msr;
@@ -267,6 +272,13 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
                         kvmppc_set_msr(vcpu, vcpu->arch.gpr[rs]);
                         break;
 
+                case 151:                                       /* stwx */
+                        rs = get_rs(inst);
+                        emulated = kvmppc_handle_store(run, vcpu,
+                                                       vcpu->arch.gpr[rs],
+                                                       4, 1);
+                        break;
+
                 case 163:                                       /* wrteei */
                         vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE)
                                          | (inst & MSR_EE);
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index f1d2cdc5331b..e522b06cc42f 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -9,7 +9,8 @@ endif
 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y                   := string.o alloc.o \
                            checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC32)     += div64.o copy_32.o
+obj-$(CONFIG_PPC32)     += div64.o copy_32.o crtsavres.o
+obj-$(CONFIG_HAS_IOMEM) += devres.o
 endif
 
 obj-$(CONFIG_PPC64)     += copypage_64.o copyuser_64.o \
@@ -23,4 +24,3 @@ obj-$(CONFIG_SMP)	+= locks.o
 endif
 
 obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
-obj-$(CONFIG_HAS_IOMEM) += devres.o
diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S
new file mode 100644
index 000000000000..70a9cd8a3008
--- /dev/null
+++ b/arch/powerpc/lib/crtsavres.S
@@ -0,0 +1,229 @@
+/*
+ * Special support for eabi and SVR4
+ *
+ *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+ *   Copyright 2008 Freescale Semiconductor, Inc.
+ *   Written By Michael Meissner
+ *
+ * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * In addition to the permissions in the GNU General Public License, the
+ * Free Software Foundation gives you unlimited permission to link the
+ * compiled version of this file with other programs, and to distribute
+ * those programs without any restriction coming from the use of this
+ * file.  (The General Public License restrictions do apply in other
+ * respects; for example, they cover modification of the file, and
+ * distribution when not linked into another program.)
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ *    As a special exception, if you link this library with files
+ *    compiled with GCC to produce an executable, this does not cause
+ *    the resulting executable to be covered by the GNU General Public License.
+ *    This exception does not however invalidate any other reasons why
+ *    the executable file might be covered by the GNU General Public License.
+ */
+
+#include <asm/ppc_asm.h>
+
+        .file   "crtsavres.S"
+        .section ".text"
+
+#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+
+/* Routines for saving integer registers, called by the compiler.  */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer save area.  */
+
+_GLOBAL(_savegpr_14)
+_GLOBAL(_save32gpr_14)
+        stw     14,-72(11)      /* save gp registers */
+_GLOBAL(_savegpr_15)
+_GLOBAL(_save32gpr_15)
+        stw     15,-68(11)
+_GLOBAL(_savegpr_16)
+_GLOBAL(_save32gpr_16)
+        stw     16,-64(11)
+_GLOBAL(_savegpr_17)
+_GLOBAL(_save32gpr_17)
+        stw     17,-60(11)
+_GLOBAL(_savegpr_18)
+_GLOBAL(_save32gpr_18)
+        stw     18,-56(11)
+_GLOBAL(_savegpr_19)
+_GLOBAL(_save32gpr_19)
+        stw     19,-52(11)
+_GLOBAL(_savegpr_20)
+_GLOBAL(_save32gpr_20)
+        stw     20,-48(11)
+_GLOBAL(_savegpr_21)
+_GLOBAL(_save32gpr_21)
+        stw     21,-44(11)
+_GLOBAL(_savegpr_22)
+_GLOBAL(_save32gpr_22)
+        stw     22,-40(11)
+_GLOBAL(_savegpr_23)
+_GLOBAL(_save32gpr_23)
+        stw     23,-36(11)
+_GLOBAL(_savegpr_24)
+_GLOBAL(_save32gpr_24)
+        stw     24,-32(11)
+_GLOBAL(_savegpr_25)
+_GLOBAL(_save32gpr_25)
+        stw     25,-28(11)
+_GLOBAL(_savegpr_26)
+_GLOBAL(_save32gpr_26)
+        stw     26,-24(11)
+_GLOBAL(_savegpr_27)
+_GLOBAL(_save32gpr_27)
+        stw     27,-20(11)
+_GLOBAL(_savegpr_28)
+_GLOBAL(_save32gpr_28)
+        stw     28,-16(11)
+_GLOBAL(_savegpr_29)
+_GLOBAL(_save32gpr_29)
+        stw     29,-12(11)
+_GLOBAL(_savegpr_30)
+_GLOBAL(_save32gpr_30)
+        stw     30,-8(11)
+_GLOBAL(_savegpr_31)
+_GLOBAL(_save32gpr_31)
+        stw     31,-4(11)
+        blr
+
+/* Routines for restoring integer registers, called by the compiler.  */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area.  */
+
+_GLOBAL(_restgpr_14)
+_GLOBAL(_rest32gpr_14)
+        lwz     14,-72(11)      /* restore gp registers */
+_GLOBAL(_restgpr_15)
+_GLOBAL(_rest32gpr_15)
+        lwz     15,-68(11)
+_GLOBAL(_restgpr_16)
+_GLOBAL(_rest32gpr_16)
+        lwz     16,-64(11)
+_GLOBAL(_restgpr_17)
+_GLOBAL(_rest32gpr_17)
+        lwz     17,-60(11)
+_GLOBAL(_restgpr_18)
+_GLOBAL(_rest32gpr_18)
+        lwz     18,-56(11)
+_GLOBAL(_restgpr_19)
+_GLOBAL(_rest32gpr_19)
+        lwz     19,-52(11)
+_GLOBAL(_restgpr_20)
+_GLOBAL(_rest32gpr_20)
+        lwz     20,-48(11)
+_GLOBAL(_restgpr_21)
+_GLOBAL(_rest32gpr_21)
+        lwz     21,-44(11)
+_GLOBAL(_restgpr_22)
+_GLOBAL(_rest32gpr_22)
+        lwz     22,-40(11)
+_GLOBAL(_restgpr_23)
+_GLOBAL(_rest32gpr_23)
+        lwz     23,-36(11)
+_GLOBAL(_restgpr_24)
+_GLOBAL(_rest32gpr_24)
+        lwz     24,-32(11)
+_GLOBAL(_restgpr_25)
+_GLOBAL(_rest32gpr_25)
+        lwz     25,-28(11)
+_GLOBAL(_restgpr_26)
+_GLOBAL(_rest32gpr_26)
+        lwz     26,-24(11)
+_GLOBAL(_restgpr_27)
+_GLOBAL(_rest32gpr_27)
+        lwz     27,-20(11)
+_GLOBAL(_restgpr_28)
+_GLOBAL(_rest32gpr_28)
+        lwz     28,-16(11)
+_GLOBAL(_restgpr_29)
+_GLOBAL(_rest32gpr_29)
+        lwz     29,-12(11)
+_GLOBAL(_restgpr_30)
+_GLOBAL(_rest32gpr_30)
+        lwz     30,-8(11)
+_GLOBAL(_restgpr_31)
+_GLOBAL(_rest32gpr_31)
+        lwz     31,-4(11)
+        blr
+
+/* Routines for restoring integer registers, called by the compiler.  */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area.  */
+
+_GLOBAL(_restgpr_14_x)
+_GLOBAL(_rest32gpr_14_x)
+        lwz     14,-72(11)      /* restore gp registers */
+_GLOBAL(_restgpr_15_x)
+_GLOBAL(_rest32gpr_15_x)
+        lwz     15,-68(11)
+_GLOBAL(_restgpr_16_x)
+_GLOBAL(_rest32gpr_16_x)
+        lwz     16,-64(11)
+_GLOBAL(_restgpr_17_x)
+_GLOBAL(_rest32gpr_17_x)
+        lwz     17,-60(11)
+_GLOBAL(_restgpr_18_x)
+_GLOBAL(_rest32gpr_18_x)
+        lwz     18,-56(11)
+_GLOBAL(_restgpr_19_x)
+_GLOBAL(_rest32gpr_19_x)
+        lwz     19,-52(11)
+_GLOBAL(_restgpr_20_x)
+_GLOBAL(_rest32gpr_20_x)
+        lwz     20,-48(11)
+_GLOBAL(_restgpr_21_x)
+_GLOBAL(_rest32gpr_21_x)
+        lwz     21,-44(11)
+_GLOBAL(_restgpr_22_x)
+_GLOBAL(_rest32gpr_22_x)
+        lwz     22,-40(11)
+_GLOBAL(_restgpr_23_x)
+_GLOBAL(_rest32gpr_23_x)
+        lwz     23,-36(11)
+_GLOBAL(_restgpr_24_x)
+_GLOBAL(_rest32gpr_24_x)
+        lwz     24,-32(11)
+_GLOBAL(_restgpr_25_x)
+_GLOBAL(_rest32gpr_25_x)
+        lwz     25,-28(11)
+_GLOBAL(_restgpr_26_x)
+_GLOBAL(_rest32gpr_26_x)
+        lwz     26,-24(11)
+_GLOBAL(_restgpr_27_x)
+_GLOBAL(_rest32gpr_27_x)
+        lwz     27,-20(11)
+_GLOBAL(_restgpr_28_x)
+_GLOBAL(_rest32gpr_28_x)
+        lwz     28,-16(11)
+_GLOBAL(_restgpr_29_x)
+_GLOBAL(_rest32gpr_29_x)
+        lwz     29,-12(11)
+_GLOBAL(_restgpr_30_x)
+_GLOBAL(_rest32gpr_30_x)
+        lwz     30,-8(11)
+_GLOBAL(_restgpr_31_x)
+_GLOBAL(_rest32gpr_31_x)
+        lwz     0,4(11)
+        lwz     31,-4(11)
+        mtlr    0
+        mr      1,11
+        blr
+#endif
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index ddeaf9e38ad5..b9ba7d930801 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -1,6 +1,4 @@
 /*
- *  $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
- *
  *  PowerPC version
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
  *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 21d248486479..70f4c833fa32 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -568,6 +568,10 @@ htab_inval_old_hpte:
         ld      r7,STK_PARM(r9)(r1)     /* ssize */
         ld      r8,STK_PARM(r8)(r1)     /* local */
         bl      .flush_hash_page
+        /* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
+        lis     r0,_PAGE_HPTE_SUB@h
+        ori     r0,r0,_PAGE_HPTE_SUB@l
+        andc    r30,r30,r0
         b       htab_insert_pte
         
 htab_bail_ok:
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 2b5a399f6fa6..0f2d239d94c4 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -94,6 +94,9 @@ unsigned long htab_hash_mask;
 int mmu_linear_psize = MMU_PAGE_4K;
 int mmu_virtual_psize = MMU_PAGE_4K;
 int mmu_vmalloc_psize = MMU_PAGE_4K;
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+int mmu_vmemmap_psize = MMU_PAGE_4K;
+#endif
 int mmu_io_psize = MMU_PAGE_4K;
 int mmu_kernel_ssize = MMU_SEGSIZE_256M;
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
@@ -387,11 +390,32 @@ static void __init htab_init_page_sizes(void)
         }
 #endif /* CONFIG_PPC_64K_PAGES */
 
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+        /* We try to use 16M pages for vmemmap if that is supported
+         * and we have at least 1G of RAM at boot
+         */
+        if (mmu_psize_defs[MMU_PAGE_16M].shift &&
+            lmb_phys_mem_size() >= 0x40000000)
+                mmu_vmemmap_psize = MMU_PAGE_16M;
+        else if (mmu_psize_defs[MMU_PAGE_64K].shift)
+                mmu_vmemmap_psize = MMU_PAGE_64K;
+        else
+                mmu_vmemmap_psize = MMU_PAGE_4K;
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
         printk(KERN_DEBUG "Page orders: linear mapping = %d, "
-               "virtual = %d, io = %d\n",
+               "virtual = %d, io = %d"
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+               ", vmemmap = %d"
+#endif
+               "\n",
                mmu_psize_defs[mmu_linear_psize].shift,
                mmu_psize_defs[mmu_virtual_psize].shift,
-               mmu_psize_defs[mmu_io_psize].shift);
+               mmu_psize_defs[mmu_io_psize].shift
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+               ,mmu_psize_defs[mmu_vmemmap_psize].shift
+#endif
+               );
 
 #ifdef CONFIG_HUGETLB_PAGE
         /* Init large page size. Currently, we pick 16M or 1M depending
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index c5ac532a0161..6aa65375abf5 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -19,6 +19,8 @@
  *
  */
 
+#undef DEBUG
+
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -208,12 +210,12 @@ int __meminit vmemmap_populated(unsigned long start, int page_size)
 }
 
 int __meminit vmemmap_populate(struct page *start_page,
-                                        unsigned long nr_pages, int node)
+                               unsigned long nr_pages, int node)
 {
         unsigned long mode_rw;
         unsigned long start = (unsigned long)start_page;
         unsigned long end = (unsigned long)(start_page + nr_pages);
-        unsigned long page_size = 1 << mmu_psize_defs[mmu_linear_psize].shift;
+        unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
 
         mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
 
@@ -235,11 +237,11 @@ int __meminit vmemmap_populate(struct page *start_page,
                         start, p, __pa(p));
 
                 mapped = htab_bolt_mapping(start, start + page_size,
-                                        __pa(p), mode_rw, mmu_linear_psize,
+                                        __pa(p), mode_rw, mmu_vmemmap_psize,
                                         mmu_kernel_ssize);
                 BUG_ON(mapped < 0);
         }
 
         return 0;
 }
-#endif
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f67e118116fa..51f82d83bf14 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -151,6 +151,7 @@ out:
         return ret;
 }
 #endif /* CONFIG_MEMORY_HOTREMOVE */
+#endif /* CONFIG_MEMORY_HOTPLUG */
 
 /*
  * walk_memory_resource() needs to make sure there is no holes in a given
@@ -184,8 +185,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg,
 }
 EXPORT_SYMBOL_GPL(walk_memory_resource);
 
-#endif /* CONFIG_MEMORY_HOTPLUG */
-
 void show_mem(void)
 {
         unsigned long total = 0, reserved = 0;
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 80d1babb230d..e0ff59f21135 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -402,7 +402,7 @@ void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
                 return;
         }
 
-        map_page(address, phys, flags);
+        map_page(address, phys, pgprot_val(flags));
         fixmaps++;
 }
 
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index cf8705e32d60..89497fb04280 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -28,7 +28,7 @@
 #include <asm/udbg.h>
 
 #ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
+#define DBG(fmt...) printk(fmt)
 #else
 #define DBG pr_debug
 #endif
@@ -263,13 +263,19 @@ void slb_initialize(void)
         extern unsigned int *slb_miss_kernel_load_linear;
         extern unsigned int *slb_miss_kernel_load_io;
         extern unsigned int *slb_compare_rr_to_size;
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+        extern unsigned int *slb_miss_kernel_load_vmemmap;
+        unsigned long vmemmap_llp;
+#endif
 
         /* Prepare our SLB miss handler based on our page size */
         linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
         io_llp = mmu_psize_defs[mmu_io_psize].sllp;
         vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
         get_paca()->vmalloc_sllp = SLB_VSID_KERNEL | vmalloc_llp;
-
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+        vmemmap_llp = mmu_psize_defs[mmu_vmemmap_psize].sllp;
+#endif
         if (!slb_encoding_inited) {
                 slb_encoding_inited = 1;
                 patch_slb_encoding(slb_miss_kernel_load_linear,
@@ -281,6 +287,12 @@ void slb_initialize(void)
 
                 DBG("SLB: linear  LLP = %04lx\n", linear_llp);
                 DBG("SLB: io      LLP = %04lx\n", io_llp);
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+                patch_slb_encoding(slb_miss_kernel_load_vmemmap,
+                                   SLB_VSID_KERNEL | vmemmap_llp);
+                DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+#endif
         }
 
         get_paca()->stab_rr = SLB_NUM_BOLTED;
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 657f6b37e9df..bc44dc4b5c67 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -47,8 +47,7 @@ _GLOBAL(slb_allocate_realmode)
          * it to VSID 0, which is reserved as a bad VSID - one which
          * will never have any pages in it.  */
 
-        /* Check if hitting the linear mapping of the vmalloc/ioremap
-         * kernel space
+        /* Check if hitting the linear mapping or some other kernel space
         */
         bne     cr7,1f
 
@@ -62,7 +61,18 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
         b       slb_finish_load_1T
 
-1:      /* vmalloc/ioremap mapping encoding bits, the "li" instructions below
+1:
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+        /* Check virtual memmap region. To be patches at kernel boot */
+        cmpldi  cr0,r9,0xf
+        bne     1f
+_GLOBAL(slb_miss_kernel_load_vmemmap)
+        li      r11,0
+        b       6f
+1:
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
+        /* vmalloc/ioremap mapping encoding bits, the "li" instructions below
          * will be patched by the kernel at boot
          */
 BEGIN_FTR_SECTION
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index 48da5dfe4856..8a455ebce98d 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -100,7 +100,7 @@ static int mpc52xx_wkup_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
         struct mpc52xx_gpiochip *chip = container_of(mm_gc,
                         struct mpc52xx_gpiochip, mmchip);
-        struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+        struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
         unsigned long flags;
 
         spin_lock_irqsave(&gpio_lock, flags);
@@ -122,7 +122,7 @@ static int
 mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-        struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+        struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
         struct mpc52xx_gpiochip *chip = container_of(mm_gc,
                         struct mpc52xx_gpiochip, mmchip);
         unsigned long flags;
@@ -150,7 +150,7 @@ static int __devinit mpc52xx_wkup_gpiochip_probe(struct of_device *ofdev,
                                         const struct of_device_id *match)
 {
         struct mpc52xx_gpiochip *chip;
-        struct mpc52xx_gpio_wkup *regs;
+        struct mpc52xx_gpio_wkup __iomem *regs;
         struct of_gpio_chip *ofchip;
         int ret;
 
@@ -260,7 +260,7 @@ static int mpc52xx_simple_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
         struct mpc52xx_gpiochip *chip = container_of(mm_gc,
                         struct mpc52xx_gpiochip, mmchip);
-        struct mpc52xx_gpio *regs = mm_gc->regs;
+        struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
         unsigned long flags;
 
         spin_lock_irqsave(&gpio_lock, flags);
@@ -284,7 +284,7 @@ mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
         struct mpc52xx_gpiochip *chip = container_of(mm_gc,
                         struct mpc52xx_gpiochip, mmchip);
-        struct mpc52xx_gpio *regs = mm_gc->regs;
+        struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
         unsigned long flags;
 
         spin_lock_irqsave(&gpio_lock, flags);
@@ -312,7 +312,7 @@ static int __devinit mpc52xx_simple_gpiochip_probe(struct of_device *ofdev,
 {
         struct mpc52xx_gpiochip *chip;
         struct of_gpio_chip *ofchip;
-        struct mpc52xx_gpio *regs;
+        struct mpc52xx_gpio __iomem *regs;
         int ret;
 
         chip = kzalloc(sizeof(*chip), GFP_KERNEL);
@@ -387,7 +387,7 @@ mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
         struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-        struct mpc52xx_gpt *regs = mm_gc->regs;
+        struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
 
         out_be32(&regs->mode, 0x04);
 
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7ff29d53dc2d..ecbe580c3f32 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -34,6 +34,7 @@ config MPC85xx_MDS
         bool "Freescale MPC85xx MDS"
         select DEFAULT_UIMAGE
         select QUICC_ENGINE
+        select PHYLIB
         help
           This option enables support for the MPC85xx MDS board
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 25f8bc75e838..43a459f63e31 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -32,6 +32,7 @@
 #include <linux/fsl_devices.h>
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
+#include <linux/phy.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -56,6 +57,95 @@
 #define DBG(fmt...)
 #endif
 
+#define MV88E1111_SCR   0x10
+#define MV88E1111_SCR_125CLK    0x0010
+static int mpc8568_fixup_125_clock(struct phy_device *phydev)
+{
+        int scr;
+        int err;
+
+        /* Workaround for the 125 CLK Toggle */
+        scr = phy_read(phydev, MV88E1111_SCR);
+
+        if (scr < 0)
+                return scr;
+
+        err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
+
+        if (err)
+                return err;
+
+        err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+        if (err)
+                return err;
+
+        scr = phy_read(phydev, MV88E1111_SCR);
+
+        if (scr < 0)
+                return err;
+
+        err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
+
+        return err;
+}
+
+static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
+{
+        int temp;
+        int err;
+
+        /* Errata */
+        err = phy_write(phydev,29, 0x0006);
+
+        if (err)
+                return err;
+
+        temp = phy_read(phydev, 30);
+
+        if (temp < 0)
+                return temp;
+
+        temp = (temp & (~0x8000)) | 0x4000;
+        err = phy_write(phydev,30, temp);
+
+        if (err)
+                return err;
+
+        err = phy_write(phydev,29, 0x000a);
+
+        if (err)
+                return err;
+
+        temp = phy_read(phydev, 30);
+
+        if (temp < 0)
+                return temp;
+
+        temp = phy_read(phydev, 30);
+
+        if (temp < 0)
+                return temp;
+
+        temp &= ~0x0020;
+
+        err = phy_write(phydev,30,temp);
+
+        if (err)
+                return err;
+
+        /* Disable automatic MDI/MDIX selection */
+        temp = phy_read(phydev, 16);
+
+        if (temp < 0)
+                return temp;
+
+        temp &= ~0x0060;
+        err = phy_write(phydev,16,temp);
+
+        return err;
+}
+
 /* ************************************************************************
  *
  * Setup the architecture
@@ -64,7 +154,7 @@
 static void __init mpc85xx_mds_setup_arch(void)
 {
         struct device_node *np;
-        static u8 *bcsr_regs = NULL;
+        static u8 __iomem *bcsr_regs = NULL;
 
         if (ppc_md.progress)
                 ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
@@ -138,6 +228,35 @@ static void __init mpc85xx_mds_setup_arch(void)
 #endif  /* CONFIG_QUICC_ENGINE */
 }
 
+
+static int __init board_fixups(void)
+{
+        char phy_id[BUS_ID_SIZE];
+        char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
+        struct device_node *mdio;
+        struct resource res;
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
+                mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
+
+                of_address_to_resource(mdio, 0, &res);
+                snprintf(phy_id, BUS_ID_SIZE, "%x:%02x", res.start, 1);
+
+                phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
+                phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
+
+                /* Register a workaround for errata */
+                snprintf(phy_id, BUS_ID_SIZE, "%x:%02x", res.start, 7);
+                phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
+
+                of_node_put(mdio);
+        }
+
+        return 0;
+}
+machine_arch_initcall(mpc85xx_mds, board_fixups);
+
 static struct of_device_id mpc85xx_ids[] = {
         { .type = "soc", },
         { .compatible = "soc", },
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index 488facb99fe8..b9246ea0928a 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -49,6 +49,8 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+static int sbc_rev;
+
 static void __init sbc8548_pic_init(void)
 {
         struct mpic *mpic;
@@ -79,6 +81,30 @@ static void __init sbc8548_pic_init(void)
         mpic_init(mpic);
 }
 
+/* Extract the HW Rev from the EPLD on the board */
+static int __init sbc8548_hw_rev(void)
+{
+        struct device_node *np;
+        struct resource res;
+        unsigned int *rev;
+        int board_rev = 0;
+
+        np = of_find_compatible_node(NULL, NULL, "hw-rev");
+        if (np == NULL) {
+                printk("No HW-REV found in DTB.\n");
+                return -ENODEV;
+        }
+
+        of_address_to_resource(np, 0, &res);
+        of_node_put(np);
+
+        rev = ioremap(res.start,sizeof(unsigned int));
+        board_rev = (*rev) >> 28;
+        iounmap(rev);
+
+        return board_rev;
+}
+
 /*
  * Setup the architecture
  */
@@ -104,6 +130,7 @@ static void __init sbc8548_setup_arch(void)
                 }
         }
 #endif
+        sbc_rev = sbc8548_hw_rev();
 }
 
 static void sbc8548_show_cpuinfo(struct seq_file *m)
@@ -115,7 +142,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
         svid = mfspr(SPRN_SVR);
 
         seq_printf(m, "Vendor\t\t: Wind River\n");
-        seq_printf(m, "Machine\t\t: SBC8548\n");
+        seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev);
         seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
         seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 
@@ -130,6 +157,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
 static struct of_device_id __initdata of_bus_ids[] = {
         { .name = "soc", },
         { .type = "soc", },
+        { .compatible = "simple-bus", },
         {},
 };
 
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 5e1e8cf14e75..dea13208bf64 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -43,6 +43,7 @@ static unsigned char *pixis_bdcfg0, *pixis_arch;
 
 static struct of_device_id __initdata mpc8610_ids[] = {
         { .compatible = "fsl,mpc8610-immr", },
+        { .compatible = "simple-bus", },
         {}
 };
 
@@ -216,11 +217,21 @@ void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
         }
 }
 
+#define PX_BRDCFG0_DVISEL       (1 << 3)
+#define PX_BRDCFG0_DLINK        (1 << 4)
+#define PX_BRDCFG0_DIU_MASK     (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
+
 void mpc8610hpcd_set_monitor_port(int monitor_port)
 {
-        static const u8 bdcfg[] = {0xBD, 0xB5, 0xA5};
+        static const u8 bdcfg[] = {
+                PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
+                PX_BRDCFG0_DLINK,
+                0,
+        };
+
         if (monitor_port < 3)
-                *pixis_bdcfg0 = bdcfg[monitor_port];
+                clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+                             bdcfg[monitor_port]);
 }
 
 void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 31da84c458d2..0e04f8fb152a 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -217,7 +217,7 @@ static u##size scc_pciex_in##name(unsigned long port)			\
 static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \
 {                                                                       \
         struct iowa_bus *bus = iowa_pio_find_bus(p);                    \
-        u##size *dst = b;                                               \
+        __le##size *dst = b;                                            \
         for (; c != 0; c--, dst++)                                      \
                 *dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \
         scc_pciex_io_flush(bus);                                        \
@@ -231,10 +231,11 @@ static void scc_pciex_outs##name(unsigned long p, const void *b,	\
                                  unsigned long c)                       \
 {                                                                       \
         struct iowa_bus *bus = iowa_pio_find_bus(p);                    \
-        const u##size *src = b;                                         \
+        const __le##size *src = b;                                      \
         for (; c != 0; c--, src++)                                      \
                 __scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \
 }
+#define __le8 u8
 #define cpu_to_le8(x) (x)
 #define le8_to_cpu(x) (x)
 PCIEX_PIO_FUNC(8, b)
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c
index 3b84e8be314c..b5f84e8f0899 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/platforms/cell/io-workarounds.c
@@ -118,7 +118,7 @@ static void iowa_##name at					\
 #undef DEF_PCI_AC_RET
 #undef DEF_PCI_AC_NORET
 
-static struct ppc_pci_io __initdata iowa_pci_io = {
+static const struct ppc_pci_io __devinitconst iowa_pci_io = {
 
 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)    .name = iowa_##name,
 #define DEF_PCI_AC_NORET(name, at, al, space, aa)       .name = iowa_##name,
@@ -146,7 +146,7 @@ static void __iomem *iowa_ioremap(unsigned long addr, unsigned long size,
 }
 
 /* Regist new bus to support workaround */
-void __init iowa_register_bus(struct pci_controller *phb,
+void __devinit iowa_register_bus(struct pci_controller *phb,
                         struct ppc_pci_io *ops,
                         int (*initfunc)(struct iowa_bus *, void *), void *data)
 {
@@ -173,7 +173,7 @@ void __init iowa_register_bus(struct pci_controller *phb,
 }
 
 /* enable IO workaround */
-void __init io_workaround_init(void)
+void __devinit io_workaround_init(void)
 {
         static int io_workaround_inited;
 
diff --git a/arch/powerpc/platforms/cell/io-workarounds.h b/arch/powerpc/platforms/cell/io-workarounds.h
index 79d8ed3d510f..6efc7782ebf2 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.h
+++ b/arch/powerpc/platforms/cell/io-workarounds.h
@@ -31,9 +31,9 @@ struct iowa_bus {
         void   *private;
 };
 
-void __init io_workaround_init(void);
-void __init iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
-                              int (*)(struct iowa_bus *, void *), void *);
+void __devinit io_workaround_init(void);
+void __devinit iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
+                                 int (*)(struct iowa_bus *, void *), void *);
 struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR);
 struct iowa_bus *iowa_pio_find_bus(unsigned long);
 
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 70c660121ec4..78f905bc6a42 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -219,15 +219,25 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
 extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
 static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
 {
+        int ret;
+
         pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
 
-        /* Handle kernel space hash faults immediately.
-           User hash faults need to be deferred to process context. */
-        if ((dsisr & MFC_DSISR_PTE_NOT_FOUND)
-            && REGION_ID(ea) != USER_REGION_ID
-            && hash_page(ea, _PAGE_PRESENT, 0x300) == 0) {
-                spu_restart_dma(spu);
-                return 0;
+        /*
+         * Handle kernel space hash faults immediately. User hash
+         * faults need to be deferred to process context.
+         */
+        if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) &&
+            (REGION_ID(ea) != USER_REGION_ID)) {
+
+                spin_unlock(&spu->register_lock);
+                ret = hash_page(ea, _PAGE_PRESENT, 0x300);
+                spin_lock(&spu->register_lock);
+
+                if (!ret) {
+                        spu_restart_dma(spu);
+                        return 0;
+                }
         }
 
         spu->class_1_dar = ea;
@@ -324,17 +334,13 @@ spu_irq_class_0(int irq, void *data)
         stat = spu_int_stat_get(spu, 0) & mask;
 
         spu->class_0_pending |= stat;
-        spu->class_0_dsisr = spu_mfc_dsisr_get(spu);
         spu->class_0_dar = spu_mfc_dar_get(spu);
-        spin_unlock(&spu->register_lock);
-
         spu->stop_callback(spu, 0);
-
         spu->class_0_pending = 0;
-        spu->class_0_dsisr = 0;
         spu->class_0_dar = 0;
 
         spu_int_stat_clear(spu, 0, stat);
+        spin_unlock(&spu->register_lock);
 
         return IRQ_HANDLED;
 }
@@ -357,13 +363,12 @@ spu_irq_class_1(int irq, void *data)
                 spu_mfc_dsisr_set(spu, 0ul);
         spu_int_stat_clear(spu, 1, stat);
 
-        if (stat & CLASS1_SEGMENT_FAULT_INTR)
-                __spu_trap_data_seg(spu, dar);
-
-        spin_unlock(&spu->register_lock);
         pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat,
                         dar, dsisr);
 
+        if (stat & CLASS1_SEGMENT_FAULT_INTR)
+                __spu_trap_data_seg(spu, dar);
+
         if (stat & CLASS1_STORAGE_FAULT_INTR)
                 __spu_trap_data_map(spu, dar, dsisr);
 
@@ -376,6 +381,8 @@ spu_irq_class_1(int irq, void *data)
         spu->class_1_dsisr = 0;
         spu->class_1_dar = 0;
 
+        spin_unlock(&spu->register_lock);
+
         return stat ? IRQ_HANDLED : IRQ_NONE;
 }
 
@@ -394,14 +401,12 @@ spu_irq_class_2(int irq, void *data)
         mask = spu_int_mask_get(spu, 2);
         /* ignore interrupts we're not waiting for */
         stat &= mask;
-
         /* mailbox interrupts are level triggered. mask them now before
          * acknowledging */
         if (stat & mailbox_intrs)
                 spu_int_mask_and(spu, 2, ~(stat & mailbox_intrs));
         /* acknowledge all interrupts before the callbacks */
         spu_int_stat_clear(spu, 2, stat);
-        spin_unlock(&spu->register_lock);
 
         pr_debug("class 2 interrupt %d, %lx, %lx\n", irq, stat, mask);
 
@@ -421,6 +426,9 @@ spu_irq_class_2(int irq, void *data)
                 spu->wbox_callback(spu);
 
         spu->stats.class2_intr++;
+
+        spin_unlock(&spu->register_lock);
+
         return stat ? IRQ_HANDLED : IRQ_NONE;
 }
 
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 80911a373400..c81341ff75b5 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -32,6 +32,7 @@
 #include <linux/marker.h>
 
 #include <asm/io.h>
+#include <asm/time.h>
 #include <asm/spu.h>
 #include <asm/spu_info.h>
 #include <asm/uaccess.h>
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index b7493b865812..f7edba6cb795 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -27,7 +27,6 @@ void spufs_stop_callback(struct spu *spu, int irq)
                 switch(irq) {
                 case 0 :
                         ctx->csa.class_0_pending = spu->class_0_pending;
-                        ctx->csa.class_0_dsisr = spu->class_0_dsisr;
                         ctx->csa.class_0_dar = spu->class_0_dar;
                         break;
                 case 1 :
@@ -51,18 +50,22 @@ int spu_stopped(struct spu_context *ctx, u32 *stat)
         u64 dsisr;
         u32 stopped;
 
-        *stat = ctx->ops->status_read(ctx);
-
-        if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
-                return 1;
-
         stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP |
                 SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
-        if (!(*stat & SPU_STATUS_RUNNING) && (*stat & stopped))
+
+top:
+        *stat = ctx->ops->status_read(ctx);
+        if (*stat & stopped) {
+                /*
+                 * If the spu hasn't finished stopping, we need to
+                 * re-read the register to get the stopped value.
+                 */
+                if (*stat & SPU_STATUS_RUNNING)
+                        goto top;
                 return 1;
+        }
 
-        dsisr = ctx->csa.class_0_dsisr;
-        if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED))
+        if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
                 return 1;
 
         dsisr = ctx->csa.class_1_dsisr;
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 2e411f23462b..e929e70a84e3 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -230,19 +230,23 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
         ctx->stats.slb_flt_base = spu->stats.slb_flt;
         ctx->stats.class2_intr_base = spu->stats.class2_intr;
 
+        spu_associate_mm(spu, ctx->owner);
+
+        spin_lock_irq(&spu->register_lock);
         spu->ctx = ctx;
         spu->flags = 0;
         ctx->spu = spu;
         ctx->ops = &spu_hw_ops;
         spu->pid = current->pid;
         spu->tgid = current->tgid;
-        spu_associate_mm(spu, ctx->owner);
         spu->ibox_callback = spufs_ibox_callback;
         spu->wbox_callback = spufs_wbox_callback;
         spu->stop_callback = spufs_stop_callback;
         spu->mfc_callback = spufs_mfc_callback;
-        mb();
+        spin_unlock_irq(&spu->register_lock);
+
         spu_unmap_mappings(ctx);
+
         spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0);
         spu_restore(&ctx->csa, spu);
         spu->timestamp = jiffies;
@@ -403,6 +407,8 @@ static int has_affinity(struct spu_context *ctx)
  */
 static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
 {
+        u32 status;
+
         spu_context_trace(spu_unbind_context__enter, ctx, spu);
 
         spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
@@ -423,18 +429,22 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
         spu_unmap_mappings(ctx);
         spu_save(&ctx->csa, spu);
         spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0);
+
+        spin_lock_irq(&spu->register_lock);
         spu->timestamp = jiffies;
         ctx->state = SPU_STATE_SAVED;
         spu->ibox_callback = NULL;
         spu->wbox_callback = NULL;
         spu->stop_callback = NULL;
         spu->mfc_callback = NULL;
-        spu_associate_mm(spu, NULL);
         spu->pid = 0;
         spu->tgid = 0;
         ctx->ops = &spu_backing_ops;
         spu->flags = 0;
         spu->ctx = NULL;
+        spin_unlock_irq(&spu->register_lock);
+
+        spu_associate_mm(spu, NULL);
 
         ctx->stats.slb_flt +=
                 (spu->stats.slb_flt - ctx->stats.slb_flt_base);
@@ -444,6 +454,9 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
         /* This maps the underlying spu state to idle */
         spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
         ctx->spu = NULL;
+
+        if (spu_stopped(ctx, &status))
+                wake_up_all(&ctx->stop_wq);
 }
 
 /**
@@ -659,7 +672,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 
                         victim->stats.invol_ctx_switch++;
                         spu->stats.invol_ctx_switch++;
-                        if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
+                        if (test_bit(SPU_SCHED_SPU_RUN, &victim->sched_flags))
                                 spu_add_to_rq(victim);
 
                         mutex_unlock(&victim->state_mutex);
diff --git a/arch/powerpc/platforms/pasemi/misc.c b/arch/powerpc/platforms/pasemi/misc.c
index ded7d152d00c..e0ab299763c1 100644
--- a/arch/powerpc/platforms/pasemi/misc.c
+++ b/arch/powerpc/platforms/pasemi/misc.c
@@ -24,12 +24,11 @@
  */
 struct i2c_driver_device {
         char    *of_device;
-        char    *i2c_driver;
         char    *i2c_type;
 };
 
 static struct i2c_driver_device i2c_devices[] __initdata = {
-        {"dallas,ds1338",  "rtc-ds1307",  "ds1338"},
+        {"dallas,ds1338",  "ds1338"},
 };
 
 static int __init find_i2c_driver(struct device_node *node,
@@ -40,9 +39,7 @@ static int __init find_i2c_driver(struct device_node *node,
         for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
                 if (!of_device_is_compatible(node, i2c_devices[i].of_device))
                         continue;
-                if (strlcpy(info->driver_name, i2c_devices[i].i2c_driver,
-                            KOBJ_NAME_LEN) >= KOBJ_NAME_LEN ||
-                    strlcpy(info->type, i2c_devices[i].i2c_type,
+                if (strlcpy(info->type, i2c_devices[i].i2c_type,
                             I2C_NAME_SIZE) >= I2C_NAME_SIZE)
                         return -ENOMEM;
                 return 0;
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 5b3fb2b321ab..3a58ffabccd9 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -317,6 +317,9 @@ static int __init ps3_mm_add_memory(void)
                 return result;
         }
 
+        lmb_add(start_addr, map.r1.size);
+        lmb_analyze();
+
         result = online_pages(start_pfn, nr_pages);
 
         if (result)
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 68ea5eee39a8..8c1ca477c52c 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -42,17 +42,20 @@ static inline const char * pcid_name (struct pci_dev *pdev)
 }
 
 #ifdef DEBUG
-static void print_device_node_tree (struct pci_dn *pdn, int dent)
+static void print_device_node_tree(struct pci_dn *pdn, int dent)
 {
         int i;
-        if (!pdn) return;
-        for (i=0;i<dent; i++)
+        struct device_node *pc;
+
+        if (!pdn)
+                return;
+        for (i = 0; i < dent; i++)
                 printk(" ");
         printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
                 pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
                 pdn->eeh_pe_config_addr, pdn->node->full_name);
         dent += 3;
-        struct device_node *pc = pdn->node->child;
+        pc = pdn->node->child;
         while (pc) {
                 print_device_node_tree(PCI_DN(pc), dent);
                 pc = pc->sibling;
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index f68903e15bd5..42f7e384e6c4 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -131,8 +131,10 @@ int __init pSeries_nvram_init(void)
                 return -ENODEV;
 
         nbytes_p = of_get_property(nvram, "#bytes", &proplen);
-        if (nbytes_p == NULL || proplen != sizeof(unsigned int))
+        if (nbytes_p == NULL || proplen != sizeof(unsigned int)) {
+                of_node_put(nvram);
                 return -EIO;
+        }
 
         nvram_size = *nbytes_p;
 
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3a7054e2bb75..019657c110b6 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -432,7 +432,7 @@ static struct i2c_driver_device i2c_devices[] __initdata = {
         {"dallas,ds1339",  "ds1339"},
         {"dallas,ds1340",  "ds1340"},
         {"stm,m41t00",     "m41t00"},
-        {"dallas,ds1374",  "rtc-ds1374"},
+        {"dallas,ds1374",  "ds1374"},
 };
 
 static int __init of_find_i2c_driver(struct device_node *node,
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 8619f2a3f1f6..7680001676a6 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1331,6 +1331,9 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
         unsigned long flags;
         u32 reg;
 
+        if (!mpic)
+                return;
+
         spin_lock_irqsave(&mpic_lock, flags);
         if (is_ipi) {
                 reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
@@ -1346,23 +1349,6 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
         spin_unlock_irqrestore(&mpic_lock, flags);
 }
 
-unsigned int mpic_irq_get_priority(unsigned int irq)
-{
-        unsigned int is_ipi;
-        struct mpic *mpic = mpic_find(irq, &is_ipi);
-        unsigned int src = mpic_irq_to_hw(irq);
-        unsigned long flags;
-        u32 reg;
-
-        spin_lock_irqsave(&mpic_lock, flags);
-        if (is_ipi)
-                reg = mpic_ipi_read(src = mpic->ipi_vecs[0]);
-        else
-                reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
-        spin_unlock_irqrestore(&mpic_lock, flags);
-        return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT;
-}
-
 void mpic_setup_this_cpu(void)
 {
 #ifdef CONFIG_SMP
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 1702de9395ee..bfcf70ee8959 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2844,7 +2844,6 @@ static void dump_spu_fields(struct spu *spu)
         DUMP_FIELD(spu, "0x%lx", flags);
         DUMP_FIELD(spu, "%d", class_0_pending);
         DUMP_FIELD(spu, "0x%lx", class_0_dar);
-        DUMP_FIELD(spu, "0x%lx", class_0_dsisr);
         DUMP_FIELD(spu, "0x%lx", class_1_dar);
         DUMP_FIELD(spu, "0x%lx", class_1_dsisr);
         DUMP_FIELD(spu, "0x%lx", irqs[0]);
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index 8df7f0e4c3a6..2352d139b262 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -43,7 +43,7 @@ KBUILD_AFLAGS += $(cpu-as-y)
 KBUILD_CFLAGS += $(cpu-as-y)
 
 # Default to the common case.
-KBUILD_DEFCONFIG := common_defconfig
+KBUILD_DEFCONFIG := ebony_defconfig
 
 head-y                          := arch/ppc/kernel/head.o
 head-$(CONFIG_8xx)              := arch/ppc/kernel/head_8xx.o
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 16ac11ca7ba0..5d529bcbeee9 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -24,6 +24,7 @@
 #include <asm/checksum.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
 #include <linux/adb.h>
 #include <linux/cuda.h>
 #include <linux/pmu.h>
@@ -59,8 +60,10 @@ long long __ashrdi3(long long, int);
 long long __ashldi3(long long, int);
 long long __lshrdi3(long long, int);
 
+EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(clear_pages);
 EXPORT_SYMBOL(clear_user_page);
+EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(transfer_to_handler);
 EXPORT_SYMBOL(do_IRQ);
 EXPORT_SYMBOL(machine_check_exception);
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index bfddfdee0b65..51e8094f52d6 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/nvram.h>
 #include <asm/xmon.h>
 #include <asm/ocp.h>
+#include <asm/irq.h>
 
 #define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
                       defined(CONFIG_PPC_MPC52xx))
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
index 18495e754e30..d687b0f8763b 100644
--- a/arch/ppc/platforms/residual.c
+++ b/arch/ppc/platforms/residual.c
@@ -38,6 +38,7 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
+#include <linux/proc_fs.h>
 
 #include <asm/sections.h>
 #include <asm/mmu.h>
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 1d035082e78e..107e492cb47e 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -304,10 +304,14 @@ config ARCH_SPARSEMEM_ENABLE
         def_bool y
         select SPARSEMEM_VMEMMAP_ENABLE
         select SPARSEMEM_VMEMMAP
+        select SPARSEMEM_STATIC if !64BIT
 
 config ARCH_SPARSEMEM_DEFAULT
         def_bool y
 
+config ARCH_SELECT_MEMORY_MODEL
+       def_bool y
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 655d52543e2d..ad40729bec3d 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -130,6 +130,7 @@ static void appldata_work_fn(struct work_struct *work)
 
         P_DEBUG("  -= Work Queue =-\n");
         i = 0;
+        get_online_cpus();
         spin_lock(&appldata_ops_lock);
         list_for_each(lh, &appldata_ops_list) {
                 ops = list_entry(lh, struct appldata_ops, list);
@@ -140,6 +141,7 @@ static void appldata_work_fn(struct work_struct *work)
                 }
         }
         spin_unlock(&appldata_ops_lock);
+        put_online_cpus();
 }
 
 /*
@@ -266,12 +268,14 @@ appldata_timer_handler(ctl_table *ctl, int write, struct file *filp,
         len = *lenp;
         if (copy_from_user(buf, buffer, len > sizeof(buf) ? sizeof(buf) : len))
                 return -EFAULT;
+        get_online_cpus();
         spin_lock(&appldata_timer_lock);
         if (buf[0] == '1')
                 __appldata_vtimer_setup(APPLDATA_ADD_TIMER);
         else if (buf[0] == '0')
                 __appldata_vtimer_setup(APPLDATA_DEL_TIMER);
         spin_unlock(&appldata_timer_lock);
+        put_online_cpus();
 out:
         *lenp = len;
         *ppos += len;
@@ -314,10 +318,12 @@ appldata_interval_handler(ctl_table *ctl, int write, struct file *filp,
                 return -EINVAL;
         }
 
+        get_online_cpus();
         spin_lock(&appldata_timer_lock);
         appldata_interval = interval;
         __appldata_vtimer_setup(APPLDATA_MOD_TIMER);
         spin_unlock(&appldata_timer_lock);
+        put_online_cpus();
 
         P_INFO("Monitoring CPU interval set to %u milliseconds.\n",
                  interval);
@@ -556,8 +562,10 @@ static int __init appldata_init(void)
                 return -ENOMEM;
         }
 
+        get_online_cpus();
         for_each_online_cpu(i)
                 appldata_online_cpu(i);
+        put_online_cpus();
 
         /* Register cpu hotplug notifier */
         register_hotcpu_notifier(&appldata_nb);
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index aa341d0ea1e6..c5cdb975d590 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Wed Apr 30 11:07:45 2008
+# Linux kernel version: 2.6.26-rc4
+# Fri May 30 09:49:33 2008
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -103,6 +103,7 @@ CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -173,6 +174,7 @@ CONFIG_PREEMPT=y
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -210,6 +212,7 @@ CONFIG_FORCE_MAX_ZONEORDER=9
 CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
 # CONFIG_CMM is not set
+# CONFIG_PAGE_STATES is not set
 CONFIG_VIRT_TIMER=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 # CONFIG_APPLDATA_BASE is not set
@@ -620,6 +623,7 @@ CONFIG_S390_VMUR=m
 #
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+CONFIG_ACCESSIBILITY=y
 
 #
 # File systems
@@ -754,11 +758,12 @@ CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-CONFIG_HEADERS_CHECK=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index dff0568e67ec..c93d1296cc0a 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -71,7 +71,7 @@ static ssize_t debug_input(struct file *file, const char __user *user_buf,
                         size_t user_len, loff_t * offset);
 static int debug_open(struct inode *inode, struct file *file);
 static int debug_close(struct inode *inode, struct file *file);
-static debug_info_t*  debug_info_create(char *name, int pages_per_area,
+static debug_info_t *debug_info_create(const char *name, int pages_per_area,
                         int nr_areas, int buf_size, mode_t mode);
 static void debug_info_get(debug_info_t *);
 static void debug_info_put(debug_info_t *);
@@ -234,8 +234,8 @@ fail_malloc_areas:
  */
 
 static debug_info_t*
-debug_info_alloc(char *name, int pages_per_area, int nr_areas, int buf_size,
-                int level, int mode)
+debug_info_alloc(const char *name, int pages_per_area, int nr_areas,
+                 int buf_size, int level, int mode)
 {
         debug_info_t* rc;
 
@@ -326,8 +326,8 @@ debug_info_free(debug_info_t* db_info){
  */
 
 static debug_info_t*
-debug_info_create(char *name, int pages_per_area, int nr_areas, int buf_size,
-                  mode_t mode)
+debug_info_create(const char *name, int pages_per_area, int nr_areas,
+                  int buf_size, mode_t mode)
 {
         debug_info_t* rc;
 
@@ -684,9 +684,9 @@ debug_close(struct inode *inode, struct file *file)
  * - Returns handle for debug area
  */
 
-debug_info_t *debug_register_mode(char *name, int pages_per_area, int nr_areas,
-                                  int buf_size, mode_t mode, uid_t uid,
-                                  gid_t gid)
+debug_info_t *debug_register_mode(const char *name, int pages_per_area,
+                                  int nr_areas, int buf_size, mode_t mode,
+                                  uid_t uid, gid_t gid)
 {
         debug_info_t *rc = NULL;
 
@@ -722,8 +722,8 @@ EXPORT_SYMBOL(debug_register_mode);
  * - returns handle for debug area
  */
 
-debug_info_t *debug_register(char *name, int pages_per_area, int nr_areas,
-                             int buf_size)
+debug_info_t *debug_register(const char *name, int pages_per_area,
+                             int nr_areas, int buf_size)
 {
         return debug_register_mode(name, pages_per_area, nr_areas, buf_size,
                                    S_IRUSR | S_IWUSR, 0, 0);
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index c14a336f6300..d2f270c995d9 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -208,7 +208,7 @@ static const unsigned char formats[][7] = {
         [INSTR_RRF_F0FF]  = { 0xff, F_16,F_24,F_28,0,0,0 },    /* e.g. madbr */
         [INSTR_RRF_FUFF]  = { 0xff, F_24,F_16,F_28,U4_20,0,0 },/* e.g. didbr */
         [INSTR_RRF_RURR]  = { 0xff, R_24,R_28,R_16,U4_20,0,0 },/* e.g. .insn */
-        [INSTR_RRF_R0RR]  = { 0xff, R_24,R_28,R_16,0,0,0 },    /* e.g. idte  */
+        [INSTR_RRF_R0RR]  = { 0xff, R_24,R_16,R_28,0,0,0 },    /* e.g. idte  */
         [INSTR_RRF_U0FF]  = { 0xff, F_24,U4_16,F_28,0,0,0 },   /* e.g. fixr  */
         [INSTR_RRF_U0RF]  = { 0xff, R_24,U4_16,F_28,0,0,0 },   /* e.g. cfebr */
         [INSTR_RRF_M0RR]  = { 0xff, R_24,R_28,M_16,0,0,0 },    /* e.g. sske  */
diff --git a/arch/s390/kernel/init_task.c b/arch/s390/kernel/init_task.c
index d494161b05b4..7ad003969251 100644
--- a/arch/s390/kernel/init_task.c
+++ b/arch/s390/kernel/init_task.c
@@ -17,7 +17,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index c59a86dca584..e7c5bfb7c755 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -25,6 +25,7 @@ int show_interrupts(struct seq_file *p, void *v)
         static const char *intrclass_names[] = { "EXT", "I/O", };
         int i = *(loff_t *) v, j;
 
+        get_online_cpus();
         if (i == 0) {
                 seq_puts(p, "           ");
                 for_each_online_cpu(j)
@@ -43,7 +44,7 @@ int show_interrupts(struct seq_file *p, void *v)
                 seq_putc(p, '\n');
 
         }
-
+        put_online_cpus();
         return 0;
 }
 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 0aeb290060d9..5d4fa4b1c74c 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -139,7 +139,6 @@ static void __smp_call_function_map(void (*func) (void *info), void *info,
         if (wait)
                 data.finished = CPU_MASK_NONE;
 
-        spin_lock(&call_lock);
         call_data = &data;
 
         for_each_cpu_mask(cpu, map)
@@ -151,7 +150,6 @@ static void __smp_call_function_map(void (*func) (void *info), void *info,
         if (wait)
                 while (!cpus_equal(map, data.finished))
                         cpu_relax();
-        spin_unlock(&call_lock);
 out:
         if (local) {
                 local_irq_disable();
@@ -177,11 +175,11 @@ int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
 {
         cpumask_t map;
 
-        preempt_disable();
+        spin_lock(&call_lock);
         map = cpu_online_map;
         cpu_clear(smp_processor_id(), map);
         __smp_call_function_map(func, info, nonatomic, wait, map);
-        preempt_enable();
+        spin_unlock(&call_lock);
         return 0;
 }
 EXPORT_SYMBOL(smp_call_function);
@@ -202,10 +200,10 @@ EXPORT_SYMBOL(smp_call_function);
 int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
                              int nonatomic, int wait)
 {
-        preempt_disable();
+        spin_lock(&call_lock);
         __smp_call_function_map(func, info, nonatomic, wait,
                                 cpumask_of_cpu(cpu));
-        preempt_enable();
+        spin_unlock(&call_lock);
         return 0;
 }
 EXPORT_SYMBOL(smp_call_function_single);
@@ -228,10 +226,10 @@ EXPORT_SYMBOL(smp_call_function_single);
 int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
                            int wait)
 {
-        preempt_disable();
+        spin_lock(&call_lock);
         cpu_clear(smp_processor_id(), mask);
         __smp_call_function_map(func, info, 0, wait, mask);
-        preempt_enable();
+        spin_unlock(&call_lock);
         return 0;
 }
 EXPORT_SYMBOL(smp_call_function_mask);
@@ -592,7 +590,9 @@ int __cpuinit start_secondary(void *cpuvoid)
         pfault_init();
 
         /* Mark this cpu as online */
+        spin_lock(&call_lock);
         cpu_set(smp_processor_id(), cpu_online_map);
+        spin_unlock(&call_lock);
         /* Switch on interrupts */
         local_irq_enable();
         /* Print info about this processor */
@@ -711,7 +711,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
         memset(sf, 0, sizeof(struct stack_frame));
         sf->gprs[9] = (unsigned long) sf;
         cpu_lowcore->save_area[15] = (unsigned long) sf;
-        __ctl_store(cpu_lowcore->cregs_save_area[0], 0, 15);
+        __ctl_store(cpu_lowcore->cregs_save_area, 0, 15);
         asm volatile(
                 "       stam    0,15,0(%0)"
                 : : "a" (&cpu_lowcore->access_regs_save_area) : "memory");
@@ -1089,7 +1089,7 @@ out:
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-int smp_rescan_cpus(void)
+int __ref smp_rescan_cpus(void)
 {
         cpumask_t newcpus;
         int cpu;
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index f639a152869f..a0775e1f08df 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -20,7 +20,7 @@ static int __diag_time_slice_end(struct kvm_vcpu *vcpu)
         VCPU_EVENT(vcpu, 5, "%s", "diag time slice end");
         vcpu->stat.diagnose_44++;
         vcpu_put(vcpu);
-        schedule();
+        yield();
         vcpu_load(vcpu);
         return 0;
 }
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index fcd1ed8015c1..84a7fed4cd4e 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -339,6 +339,11 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
         if (kvm_cpu_has_interrupt(vcpu))
                 return 0;
 
+        __set_cpu_idle(vcpu);
+        spin_lock_bh(&vcpu->arch.local_int.lock);
+        vcpu->arch.local_int.timer_due = 0;
+        spin_unlock_bh(&vcpu->arch.local_int.lock);
+
         if (psw_interrupts_disabled(vcpu)) {
                 VCPU_EVENT(vcpu, 3, "%s", "disabled wait");
                 __unset_cpu_idle(vcpu);
@@ -366,8 +371,6 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
 no_timer:
         spin_lock_bh(&vcpu->arch.local_int.float_int->lock);
         spin_lock_bh(&vcpu->arch.local_int.lock);
-        __set_cpu_idle(vcpu);
-        vcpu->arch.local_int.timer_due = 0;
         add_wait_queue(&vcpu->arch.local_int.wq, &wait);
         while (list_empty(&vcpu->arch.local_int.list) &&
                 list_empty(&vcpu->arch.local_int.float_int->list) &&
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 0ac36a649eba..6558b09ff579 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -423,6 +423,8 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
         return -EINVAL; /* not implemented yet */
 }
 
+extern void s390_handle_mcck(void);
+
 static void __vcpu_run(struct kvm_vcpu *vcpu)
 {
         memcpy(&vcpu->arch.sie_block->gg14, &vcpu->arch.guest_gprs[14], 16);
@@ -430,13 +432,21 @@ static void __vcpu_run(struct kvm_vcpu *vcpu)
         if (need_resched())
                 schedule();
 
+        if (test_thread_flag(TIF_MCCK_PENDING))
+                s390_handle_mcck();
+
+        kvm_s390_deliver_pending_interrupts(vcpu);
+
         vcpu->arch.sie_block->icptcode = 0;
         local_irq_disable();
         kvm_guest_enter();
         local_irq_enable();
         VCPU_EVENT(vcpu, 6, "entering sie flags %x",
                    atomic_read(&vcpu->arch.sie_block->cpuflags));
-        sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs);
+        if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
+                VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction");
+                kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
+        }
         VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
                    vcpu->arch.sie_block->icptcode);
         local_irq_disable();
@@ -475,7 +485,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
         might_sleep();
 
         do {
-                kvm_s390_deliver_pending_interrupts(vcpu);
                 __vcpu_run(vcpu);
                 rc = kvm_handle_sie_intercept(vcpu);
         } while (!signal_pending(current) && !rc);
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 29f3a63806b9..05598649b326 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -44,37 +44,34 @@ char  empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 
 void show_mem(void)
 {
-        int i, total = 0, reserved = 0;
-        int shared = 0, cached = 0;
+        unsigned long i, total = 0, reserved = 0;
+        unsigned long shared = 0, cached = 0;
+        unsigned long flags;
         struct page *page;
+        pg_data_t *pgdat;
 
         printk("Mem-info:\n");
         show_free_areas();
-        i = max_mapnr;
-        while (i-- > 0) {
-                if (!pfn_valid(i))
-                        continue;
-                page = pfn_to_page(i);
-                total++;
-                if (PageReserved(page))
-                        reserved++;
-                else if (PageSwapCache(page))
-                        cached++;
-                else if (page_count(page))
-                        shared += page_count(page) - 1;
+        for_each_online_pgdat(pgdat) {
+                pgdat_resize_lock(pgdat, &flags);
+                for (i = 0; i < pgdat->node_spanned_pages; i++) {
+                        if (!pfn_valid(pgdat->node_start_pfn + i))
+                                continue;
+                        page = pfn_to_page(pgdat->node_start_pfn + i);
+                        total++;
+                        if (PageReserved(page))
+                                reserved++;
+                        else if (PageSwapCache(page))
+                                cached++;
+                        else if (page_count(page))
+                                shared += page_count(page) - 1;
+                }
+                pgdat_resize_unlock(pgdat, &flags);
         }
-        printk("%d pages of RAM\n", total);
-        printk("%d reserved pages\n", reserved);
-        printk("%d pages shared\n", shared);
-        printk("%d pages swap cached\n", cached);
-
-        printk("%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
-        printk("%lu pages writeback\n", global_page_state(NR_WRITEBACK));
-        printk("%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
-        printk("%lu pages slab\n",
-               global_page_state(NR_SLAB_RECLAIMABLE) +
-               global_page_state(NR_SLAB_UNRECLAIMABLE));
-        printk("%lu pages pagetables\n", global_page_state(NR_PAGETABLE));
+        printk("%ld pages of RAM\n", total);
+        printk("%ld reserved pages\n", reserved);
+        printk("%ld pages shared\n", shared);
+        printk("%ld pages swap cached\n", cached);
 }
 
 /*
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 5c1aea97cd12..3d98ba82ea67 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -254,36 +254,46 @@ void disable_noexec(struct mm_struct *mm, struct task_struct *tsk)
 int s390_enable_sie(void)
 {
         struct task_struct *tsk = current;
-        struct mm_struct *mm;
-        int rc;
+        struct mm_struct *mm, *old_mm;
 
-        task_lock(tsk);
-
-        rc = 0;
+        /* Do we have pgstes? if yes, we are done */
         if (tsk->mm->context.pgstes)
-                goto unlock;
+                return 0;
 
-        rc = -EINVAL;
+        /* lets check if we are allowed to replace the mm */
+        task_lock(tsk);
         if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
-            tsk->mm != tsk->active_mm || tsk->mm->ioctx_list)
-                goto unlock;
+            tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) {
+                task_unlock(tsk);
+                return -EINVAL;
+        }
+        task_unlock(tsk);
 
-        tsk->mm->context.pgstes = 1;    /* dirty little tricks .. */
+        /* we copy the mm with pgstes enabled */
+        tsk->mm->context.pgstes = 1;
         mm = dup_mm(tsk);
         tsk->mm->context.pgstes = 0;
-
-        rc = -ENOMEM;
         if (!mm)
-                goto unlock;
-        mmput(tsk->mm);
+                return -ENOMEM;
+
+        /* Now lets check again if somebody attached ptrace etc */
+        task_lock(tsk);
+        if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
+            tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) {
+                mmput(mm);
+                task_unlock(tsk);
+                return -EINVAL;
+        }
+
+        /* ok, we are alone. No ptrace, no threads, etc. */
+        old_mm = tsk->mm;
         tsk->mm = tsk->active_mm = mm;
         preempt_disable();
         update_mm(mm, tsk);
         cpu_set(smp_processor_id(), mm->cpu_vm_mask);
         preempt_enable();
-        rc = 0;
-unlock:
         task_unlock(tsk);
-        return rc;
+        mmput(old_mm);
+        return 0;
 }
 EXPORT_SYMBOL_GPL(s390_enable_sie);
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index beccacf907f3..e4868bfc672f 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -60,7 +60,7 @@ static inline pmd_t *vmem_pmd_alloc(void)
         return pmd;
 }
 
-static pte_t __init_refok *vmem_pte_alloc(void)
+static pte_t __ref *vmem_pte_alloc(void)
 {
         pte_t *pte;
 
@@ -221,6 +221,7 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node)
                         *pt_dir = pte;
                 }
         }
+        memset(start, 0, nr * sizeof(struct page));
         ret = 0;
 out:
         flush_tlb_kernel_range(start_addr, end_addr);
@@ -235,7 +236,7 @@ static int insert_memory_segment(struct memory_segment *seg)
 {
         struct memory_segment *tmp;
 
-        if (seg->start + seg->size >= VMEM_MAX_PHYS ||
+        if (seg->start + seg->size > VMEM_MAX_PHYS ||
             seg->start + seg->size < seg->start)
                 return -ERANGE;
 
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8a68160079a9..9a854c8e5274 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -281,7 +281,6 @@ config CPU_SUBTYPE_SH7723
         select CPU_SH4A
         select CPU_SHX2
         select ARCH_SPARSEMEM_ENABLE
-        select SYS_SUPPORTS_NUMA
         help
           Select SH7723 if you have an SH-MobileR2 CPU.
 
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0d2ef1e9a6fd..0f4549860226 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -81,7 +81,7 @@ config DEBUG_STACK_USAGE
 
 config 4KSTACKS
         bool "Use 4Kb for kernel stacks instead of 8Kb"
-        depends on DEBUG_KERNEL
+        depends on DEBUG_KERNEL && (MMU || BROKEN)
         help
           If you say Y here the kernel will use a 4Kb stacksize for the
           kernel stack attached to each process/thread. This facilitates
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 8050b03d51fc..fb7b1b15e392 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -41,6 +41,8 @@ cflags-$(CONFIG_CPU_SH5)		:= $(call cc-option,-m5-32media-nofpu,)
 cflags-$(CONFIG_CPU_BIG_ENDIAN)         += -mb
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)      += -ml
 
+cflags-y        += $(call cc-option,-mno-fdpic)
+
 #
 # -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
 # support it, while -Wa,-dsp by itself limits the range of usable opcodes
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 452d0d6459a4..2308e8753bcd 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
-#include <linux/serial_8250.h>
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
 #include <linux/pm.h>
@@ -109,27 +108,6 @@ static struct platform_device heartbeat_device = {
         .resource       = heartbeat_resources,
 };
 
-static struct plat_serial8250_port uart_platform_data[] = {
-        {
-                .membase        = (void __iomem *)0xb3e30000,
-                .mapbase        = 0xb3e30000,
-                .iotype         = UPIO_MEM,
-                .irq            = IRQ_VOYAGER,
-                .flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
-                .regshift       = 2,
-                .uartclk        = (9600 * 16),
-        },
-        { 0 },
-};
-
-static struct platform_device uart_device = {
-        .name           = "serial8250",
-        .id             = PLAT8250_DEV_PLATFORM,
-        .dev            = {
-                .platform_data  = uart_platform_data,
-        },
-};
-
 static struct resource sm501_resources[] = {
         [0]     = {
                 .start  = 0x10000000,
@@ -185,11 +163,7 @@ static struct sm501_platdata_fb sm501_fb_pdata = {
 };
 
 static struct sm501_initdata sm501_initdata = {
-        .gpio_high      = {
-                .set    = 0x00001fe0,
-                .mask   = 0x0,
-        },
-        .devices        = SM501_USE_USB_HOST,
+        .devices        = SM501_USE_USB_HOST | SM501_USE_UART0,
 };
 
 static struct sm501_platdata sm501_platform_data = {
@@ -208,7 +182,6 @@ static struct platform_device sm501_device = {
 };
 
 static struct platform_device *rts7751r2d_devices[] __initdata = {
-        &uart_device,
         &sm501_device,
         &heartbeat_device,
         &spi_sh_sci_device,
@@ -272,16 +245,6 @@ static void __init rts7751r2d_setup(char **cmdline_p)
 
         sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
         writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
-
-        /*
-         * Power Mode Gate - Enable UART0
-         */
-
-        sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE;
-        writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
-
-        sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE;
-        writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
 }
 
 /*
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index ee5900817f8f..287408b2ace6 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Wed Feb  6 21:52:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Thu May 22 14:30:07 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,18 +37,16 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -61,11 +60,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -77,11 +78,15 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -105,7 +110,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -118,6 +122,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -135,6 +140,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -142,6 +148,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 CONFIG_CPU_SUBTYPE_SH7722=y
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -255,7 +262,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -323,8 +329,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -376,7 +380,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -385,11 +472,13 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -461,6 +550,7 @@ CONFIG_SMC91X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -482,13 +572,20 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -508,6 +605,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -531,16 +629,40 @@ CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_SH_MOBILE=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -553,12 +675,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -592,6 +724,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -608,6 +742,7 @@ CONFIG_USB_GADGET_SELECTED=y
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -623,7 +758,9 @@ CONFIG_USB_G_SERIAL=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -640,15 +777,31 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
 # SPI RTC drivers
 #
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -657,10 +810,6 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -673,13 +822,10 @@ CONFIG_RTC_DRV_SH=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -720,10 +866,13 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
@@ -743,6 +892,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -763,48 +913,77 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 
@@ -812,6 +991,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
new file mode 100644
index 000000000000..a0ebd439cbd2
--- /dev/null
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -0,0 +1,841 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun  3 13:02:42 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH2=y
+CONFIG_CPU_SH2A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+CONFIG_CPU_SUBTYPE_SH7203=y
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_FPU=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_CMT=y
+# CONFIG_SH_MTU2 is not set
+CONFIG_SH_TIMER_IRQ=142
+CONFIG_SH_PCLK_FREQ=16670800
+CONFIG_SH_CLK_MD=0
+# CONFIG_TICK_ONESHOT is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_BOOTMEM=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_IRQSTACKS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 0d0cda908270..6b34baa26eae 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,9 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Sep 13 16:40:16 2007
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun  3 20:27:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +19,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -25,47 +27,82 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MM_OWNER=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 
@@ -81,6 +118,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_CLASSIC_RCU is not set
 
 #
 # System type
@@ -88,7 +126,10 @@ CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SH2A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 CONFIG_CPU_SUBTYPE_SH7206=y
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -97,6 +138,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -105,14 +147,17 @@ CONFIG_CPU_SUBTYPE_SH7206=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -121,23 +166,25 @@ CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -183,13 +230,16 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_SH_CPU_FREQ is not set
+CONFIG_SH_CPU_FREQ=y
 
 #
 # DMA support
@@ -213,11 +263,15 @@ CONFIG_HEARTBEAT=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_KEXEC is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
 
 #
 # Boot options
@@ -225,25 +279,25 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
 
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_BINFMT_MISC=y
 
 #
 # Networking
@@ -253,14 +307,24 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -273,14 +337,13 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -297,10 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -308,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -329,8 +389,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -339,11 +401,9 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -356,6 +416,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -390,7 +451,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x20000000
 CONFIG_MTD_PHYSMAP_LEN=0x01000000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_SOLUTIONENGINE is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -418,13 +478,19 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -443,23 +509,30 @@ CONFIG_NETDEVICES=y
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -469,28 +542,7 @@ CONFIG_NETDEV_10000=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -502,6 +554,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -520,106 +573,119 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_SH=y
 # CONFIG_UIO is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -642,10 +708,11 @@ CONFIG_ROMFS_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -658,18 +725,28 @@ CONFIG_RAMFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -681,30 +758,20 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -712,7 +779,10 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -722,38 +792,123 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800
-CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index ab77b0e0fa0e..938817e34e2b 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -154,4 +154,4 @@ module_exit(heartbeat_exit);
 
 MODULE_VERSION(DRV_VERSION);
 MODULE_AUTHOR("Paul Mundt");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index de45c6a3e33b..79baa47af977 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -242,6 +242,7 @@ void __init plat_irq_setup(void)
                                 reg += 8;
                         }
                 }
+        }
 #endif
 
         /*
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index ebceb0dadff5..be4926969181 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -132,6 +132,7 @@ int __init detect_cpu_and_cache_system(void)
 
                 switch (prr) {
                 case 0x50:
+                case 0x51:
                         boot_cpu_data.type = CPU_SH7723;
                         boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
                         break;
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index 805535aa505e..27fa81bef6a0 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -26,7 +26,7 @@ static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18,
 
 static void master_clk_init(struct clk *clk)
 {
-        clk->rate *= 36;
+        clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f];
 }
 
 static struct clk_ops sh7785_master_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 069314037049..62ebccf18b3c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -16,7 +16,7 @@
 
 static struct resource usbf_resources[] = {
         [0] = {
-                .name   = "USBF",
+                .name   = "m66592_udc",
                 .start  = 0x04480000,
                 .end    = 0x044800FF,
                 .flags  = IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 16925cf28db8..a0470f2f5479 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -16,6 +16,21 @@
 
 static struct plat_sci_port sci_platform_data[] = {
         {
+                .mapbase        = 0xffe00000,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .type           = PORT_SCIF,
+                .irqs           = { 80, 80, 80, 80 },
+        },{
+                .mapbase        = 0xffe10000,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .type           = PORT_SCIF,
+                .irqs           = { 81, 81, 81, 81 },
+        },{
+                .mapbase        = 0xffe20000,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .type           = PORT_SCIF,
+                .irqs           = { 82, 82, 82, 82 },
+        },{
                 .mapbase        = 0xa4e30000,
                 .flags          = UPF_BOOT_AUTOCONF,
                 .type           = PORT_SCI,
@@ -73,9 +88,35 @@ static struct platform_device rtc_device = {
         .resource       = rtc_resources,
 };
 
+static struct resource sh7723_usb_host_resources[] = {
+        [0] = {
+                .name   = "r8a66597_hcd",
+                .start  = 0xa4d80000,
+                .end    = 0xa4d800ff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 65,
+                .end    = 65,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device sh7723_usb_host_device = {
+        .name           = "r8a66597_hcd",
+        .id             = 0,
+        .dev = {
+                .dma_mask               = NULL,         /*  not use dma */
+                .coherent_dma_mask      = 0xffffffff,
+        },
+        .num_resources  = ARRAY_SIZE(sh7723_usb_host_resources),
+        .resource       = sh7723_usb_host_resources,
+};
+
 static struct platform_device *sh7723_devices[] __initdata = {
         &sci_device,
         &rtc_device,
+        &sh7723_usb_host_device,
 };
 
 static int __init sh7723_devices_setup(void)
@@ -153,7 +194,7 @@ static struct intc_vect vectors[] __initdata = {
         INTC_VECT(VIO_VOUI,0x8E0),
 
         INTC_VECT(SCIFA_SCIFA0,0x900),
-        INTC_VECT(VPU_VPUI,0x920),
+        INTC_VECT(VPU_VPUI,0x980),
         INTC_VECT(TPU_TPUI,0x9A0),
         INTC_VECT(ADC_ADI,0x9E0),
         INTC_VECT(USB_USI0,0xA20),
@@ -292,9 +333,3 @@ void __init plat_irq_setup(void)
 {
         register_intc_controller(&intc_desc);
 }
-
-void __init plat_mem_setup(void)
-{
-        /* Register the URAM space as Node 1 */
-        setup_bootmem_node(1, 0x055f0000, 0x05610000);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index ae2b22219f02..f189a559462b 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -291,8 +291,9 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
 };
 
 static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
-                         NULL, NULL, irq_mask_registers, irq_prio_registers,
-                         irq_sense_registers);
+                        NULL, irq_mask_registers, irq_prio_registers,
+                        irq_sense_registers);
+
 
 /* External interrupt pins in IRL mode */
 static struct intc_vect irl_vectors[] __initdata = {
@@ -324,10 +325,10 @@ static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
 };
 
 static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
-                         NULL, NULL, irl7654_mask_registers, NULL, NULL);
+                        NULL, irl7654_mask_registers, NULL, NULL);
 
 static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
-                         NULL, NULL, irl3210_mask_registers, NULL, NULL);
+                        NULL, irl3210_mask_registers, NULL, NULL);
 
 #define INTC_ICR0       0xffd00000
 #define INTC_INTMSK0    0xffd00044
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 926b2e7b11c1..718bd2356b34 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -1,9 +1,6 @@
-/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $
- *
- *  linux/arch/sh/entry.S
- *
+/* 
  *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- *  Copyright (C) 2003  Paul Mundt
+ *  Copyright (C) 2003 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -262,6 +259,7 @@ __restore_all:
 
         .align  2
 syscall_badsys:                 ! Bad syscall number
+        get_current_thread_info r8, r0
         mov     #-ENOSYS, r0
         bra     resume_userspace
          mov.l  r0, @(OFF_R0,r15)       ! Return value
@@ -281,7 +279,9 @@ debug_trap:
         mov.l   1f, r8
         add     r0, r8
         mov.l   @r8, r8
-        jmp     @r8
+        jsr     @r8
+         nop
+        bra     __restore_all
          nop
 
         .align  2
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index d67d7ed09f22..ae0a382a82eb 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -30,8 +30,8 @@ ENTRY(empty_zero_page)
         .long   0               /* RAMDISK_FLAGS */
         .long   0x0200          /* ORIG_ROOT_DEV */
         .long   1               /* LOADER_TYPE */
-        .long   0x00360000      /* INITRD_START */
-        .long   0x000a0000      /* INITRD_SIZE */
+        .long   0x00000000      /* INITRD_START */
+        .long   0x00000000      /* INITRD_SIZE */
 #ifdef CONFIG_32BIT
         .long   0x53453f00 + 32 /* "SE?" = 32 bit */
 #else
diff --git a/arch/sh/kernel/init_task.c b/arch/sh/kernel/init_task.c
index f9bcc606127e..b151a25cb14d 100644
--- a/arch/sh/kernel/init_task.c
+++ b/arch/sh/kernel/init_task.c
@@ -8,7 +8,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct pt_regs fake_swapper_regs;
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index d453c3a1c79f..bf8ac4c71640 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -274,8 +274,7 @@ static char *mem_to_hex(const char *mem, char *buf, const int count)
         }
         for (i = 0; i < count; i++) {
                 ch = *mem++;
-                *buf++ = highhex(ch);
-                *buf++ = lowhex(ch);
+                buf = pack_hex_byte(buf, ch);
         }
         *buf = 0;
         return (buf);
@@ -330,14 +329,6 @@ static char *ebin_to_mem(const char *buf, char *mem, int count)
         return mem;
 }
 
-/* Pack a hex byte */
-static char *pack_hex_byte(char *pkt, int byte)
-{
-        *pkt++ = hexchars[(byte >> 4) & 0xf];
-        *pkt++ = hexchars[(byte & 0xf)];
-        return pkt;
-}
-
 /* Scan for the start char '$', read the packet and check the checksum */
 static void get_packet(char *buffer, int buflen)
 {
@@ -435,8 +426,8 @@ static void put_packet(char *buffer)
 
                 /* '#' Separator, put high and low components of checksum */
                 put_debug_char('#');
-                put_debug_char(highhex(checksum));
-                put_debug_char(lowhex(checksum));
+                put_debug_char(hex_asc_hi(checksum));
+                put_debug_char(hex_asc_lo(checksum));
         }
         while ((get_debug_char()) != '+');      /* While no ack */
 }
@@ -658,8 +649,8 @@ static void undo_single_step(void)
 static void send_signal_msg(const int signum)
 {
         out_buffer[0] = 'S';
-        out_buffer[1] = highhex(signum);
-        out_buffer[2] = lowhex(signum);
+        out_buffer[1] = hex_asc_hi(signum);
+        out_buffer[2] = hex_asc_lo(signum);
         out_buffer[3] = 0;
         put_packet(out_buffer);
 }
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index b3d0a03b4c76..5482e65375a9 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -30,6 +30,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <asm/unaligned.h>
 
 void *module_alloc(unsigned long size)
 {
@@ -56,34 +57,6 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
         return 0;
 }
 
-#ifdef CONFIG_SUPERH32
-#define COPY_UNALIGNED_WORD(sw, tw, align) \
-{ \
-        void *__s = &(sw), *__t = &(tw); \
-        unsigned short *__s2 = __s, *__t2 = __t; \
-        unsigned char *__s1 = __s, *__t1 = __t; \
-        switch ((align)) \
-        { \
-        case 0: \
-                *(unsigned long *) __t = *(unsigned long *) __s; \
-                break; \
-        case 2: \
-                *__t2++ = *__s2++; \
-                *__t2 = *__s2; \
-                break; \
-        default: \
-                *__t1++ = *__s1++; \
-                *__t1++ = *__s1++; \
-                *__t1++ = *__s1++; \
-                *__t1 = *__s1; \
-                break; \
-        } \
-}
-#else
-/* One thing SHmedia doesn't screw up! */
-#define COPY_UNALIGNED_WORD(sw, tw, align)      { (tw) = (sw); }
-#endif
-
 int apply_relocate_add(Elf32_Shdr *sechdrs,
                    const char *strtab,
                    unsigned int symindex,
@@ -96,7 +69,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
         Elf32_Addr relocation;
         uint32_t *location;
         uint32_t value;
-        int align;
 
         pr_debug("Applying relocate section %u to %u\n", relsec,
                  sechdrs[relsec].sh_info);
@@ -109,7 +81,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
                 sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
                         + ELF32_R_SYM(rel[i].r_info);
                 relocation = sym->st_value + rel[i].r_addend;
-                align = (int)location & 3;
 
 #ifdef CONFIG_SUPERH64
                 /* For text addresses, bit2 of the st_other field indicates
@@ -122,15 +93,15 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 
                 switch (ELF32_R_TYPE(rel[i].r_info)) {
                 case R_SH_DIR32:
-                        COPY_UNALIGNED_WORD (*location, value, align);
+                        value = get_unaligned(location);
                         value += relocation;
-                        COPY_UNALIGNED_WORD (value, *location, align);
+                        put_unaligned(value, location);
                         break;
                 case R_SH_REL32:
                         relocation = (relocation - (Elf32_Addr) location);
-                        COPY_UNALIGNED_WORD (*location, value, align);
+                        value = get_unaligned(location);
                         value += relocation;
-                        COPY_UNALIGNED_WORD (value, *location, align);
+                        put_unaligned(value, location);
                         break;
                 case R_SH_IMM_LOW16:
                         *location = (*location & ~0x3fffc00) |
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 516bde9c50fa..bca2bbc575db 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -292,6 +292,17 @@ void __init setup_arch(char **cmdline_p)
 
         ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
 
+        printk(KERN_NOTICE "Boot params:\n"
+                           "... MOUNT_ROOT_RDONLY - %08lx\n"
+                           "... RAMDISK_FLAGS     - %08lx\n"
+                           "... ORIG_ROOT_DEV     - %08lx\n"
+                           "... LOADER_TYPE       - %08lx\n"
+                           "... INITRD_START      - %08lx\n"
+                           "... INITRD_SIZE       - %08lx\n",
+                           MOUNT_ROOT_RDONLY, RAMDISK_FLAGS,
+                           ORIG_ROOT_DEV, LOADER_TYPE,
+                           INITRD_START, INITRD_SIZE);
+
 #ifdef CONFIG_BLK_DEV_RAM
         rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
         rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index a3bdc68ef02c..438f1ebcc453 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -4,6 +4,7 @@
 #include <linux/kdebug.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
+#include <linux/uaccess.h>
 #include <asm/system.h>
 
 #ifdef CONFIG_BUG
@@ -21,7 +22,14 @@ static void handle_BUG(struct pt_regs *regs)
 
 int is_valid_bugaddr(unsigned long addr)
 {
-        return addr >= PAGE_OFFSET;
+        unsigned short opcode;
+
+        if (addr < PAGE_OFFSET)
+                return 0;
+        if (probe_kernel_address((u16 *)addr, opcode))
+                return 0;
+
+        return opcode == TRAPA_BUG_OPCODE;
 }
 #endif
 
diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S
index 560bc17eebdd..459fa92a7c53 100644
--- a/arch/sh/lib/memcpy-sh4.S
+++ b/arch/sh/lib/memcpy-sh4.S
@@ -126,10 +126,10 @@
 
          mov.l  r3,@-r0         !  30 LS
 #else
-3:      mov     r1,r3           ! OPQR
+3:      mov     r7,r3           ! OPQR
         shlr8   r3              ! xOPQ
-        mov.l   @(r0,r5),r1     ! KLMN
-        mov     r1,r6
+        mov.l   @(r0,r5),r7     ! KLMN
+        mov     r7,r6
         shll16  r6
         shll8   r6              ! Nxxx
         or      r6,r3           ! NOPQ
@@ -733,24 +733,24 @@ ENTRY(memcpy)
         movca.l r0,@r1          !  40 LS (latency=3-7)
         add     #-0x1c, r1      !  50 EX
 
-        mov.l   r3, @(0x1c,r1)  !  33 LS
+        mov.l   r3, @(0x18,r1)  !  33 LS
         xtrct   r11, r10        !  48 EX
 
-        mov.l   r6, @(0x18,r1)  !  33 LS
+        mov.l   r6, @(0x14,r1)  !  33 LS
         xtrct   r12, r11        !  48 EX
 
-        mov.l   r7, @(0x14,r1)  !  33 LS
+        mov.l   r7, @(0x10,r1)  !  33 LS
 
-        mov.l   r8, @(0x10,r1)  !  33 LS
-        add     #-0x3e, r5      !  50 EX
+        mov.l   r8, @(0x0c,r1)  !  33 LS
+        add     #-0x1e, r5      !  50 EX
 
-        mov.l   r9, @(0x0c,r1)  !  33 LS
+        mov.l   r9, @(0x08,r1)  !  33 LS
         cmp/eq  r2,r1           !  54 MT
 
-        mov.l   r10, @(0x08,r1) !  33 LS
+        mov.l   r10, @(0x04,r1) !  33 LS
         bf/s    2b              ! 109 BR
 
-         mov.l  r11, @(0x04,r1) !  33 LS
+         mov.l  r11, @(0x00,r1) !  33 LS
 #endif
 
         mov.l   @r15+, r12
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index d211fdb24584..789724e61e83 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -1,4 +1,3 @@
-# $Id: config.in,v 1.113 2002/01/24 22:14:44 davem Exp $
 # For a description of the syntax of this configuration file,
 # see Documentation/kbuild/kconfig-language.txt.
 #
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index b365084316ac..22d331e1e941 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.10 2000/02/23 08:17:46 jj Exp $
 # Makefile for the Sparc boot stuff.
 #
 # Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c
index dc7b0546e3bb..52a4208fe4f0 100644
--- a/arch/sparc/boot/btfixupprep.c
+++ b/arch/sparc/boot/btfixupprep.c
@@ -1,4 +1,4 @@
-/* $Id: btfixupprep.c,v 1.6 2001/08/22 15:27:47 davem Exp $
+/*
    Simple utility to prepare vmlinux image for sparc.
    Resolves all BTFIXUP uses and settings and creates
    a special .s object to link to the image.
diff --git a/arch/sparc/boot/piggyback.c b/arch/sparc/boot/piggyback.c
index 6962cc68ed5b..c9f500c1a8b2 100644
--- a/arch/sparc/boot/piggyback.c
+++ b/arch/sparc/boot/piggyback.c
@@ -1,4 +1,4 @@
-/* $Id: piggyback.c,v 1.4 2000/12/05 00:48:57 anton Exp $
+/*
    Simple utility to make a single-image install kernel with initial ramdisk
    for Sparc tftpbooting without need to set up nfs.
 
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
index 96344ff2bbe1..92c6fc07e59c 100644
--- a/arch/sparc/kernel/ebus.c
+++ b/arch/sparc/kernel/ebus.c
@@ -1,4 +1,4 @@
-/* $Id: ebus.c,v 1.20 2002/01/05 01:13:43 davem Exp $
+/*
  * ebus.c: PCI to EBus bridge device.
  *
  * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
diff --git a/arch/sparc/kernel/etrap.S b/arch/sparc/kernel/etrap.S
index a8b35bed12a2..f37d961d67a6 100644
--- a/arch/sparc/kernel/etrap.S
+++ b/arch/sparc/kernel/etrap.S
@@ -1,4 +1,4 @@
-/* $Id: etrap.S,v 1.31 2000/01/08 16:38:18 anton Exp $
+/*
  * etrap.S: Sparc trap window preparation for entry into the
  *          Linux kernel.
  *
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 8bec05fa5795..3bfd6085a91d 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -1,4 +1,4 @@
-/* $Id: head.S,v 1.105 2001/08/12 09:08:56 davem Exp $
+/*
  * head.S: The initial boot code for the Sparc port of Linux.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 3a5bad525394..7220562cdb34 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -1,4 +1,4 @@
-/* $Id: idprom.c,v 1.24 1999/08/31 06:54:20 davem Exp $
+/*
  * idprom.c: Routines to load the idprom into kernel addresses and
  *           interpret the data contained within.
  *
diff --git a/arch/sparc/kernel/init_task.c b/arch/sparc/kernel/init_task.c
index d9d4f96360c7..8e64ebc445ef 100644
--- a/arch/sparc/kernel/init_task.c
+++ b/arch/sparc/kernel/init_task.c
@@ -9,7 +9,6 @@
 #include <asm/uaccess.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index ad0ede24ca1d..7b17522f59bf 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -1,4 +1,4 @@
-/* $Id: ioport.c,v 1.45 2001/10/30 04:54:21 davem Exp $
+/*
  * ioport.c:  Simple io mapping allocator.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index 01a6756ba371..087390b092b0 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -1,4 +1,4 @@
-/*  $Id: irq.c,v 1.114 2001/12/11 04:55:51 davem Exp $
+/*
  *  arch/sparc/kernel/irq.c:  Interrupt request handling routines. On the
  *                            Sparc the IRQs are basically 'cast in stone'
  *                            and you are supposed to probe the prom's device
diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
index 59e9344e7a0d..adaaed4ea2fb 100644
--- a/arch/sparc/kernel/led.c
+++ b/arch/sparc/kernel/led.c
@@ -2,6 +2,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/string.h>
 #include <linux/jiffies.h>
 #include <linux/timer.h>
@@ -45,21 +46,22 @@ static void led_blink(unsigned long timeout)
         add_timer(&led_blink_timer);
 }
 
-static int led_read_proc(char *buf, char **start, off_t offset, int count,
-                         int *eof, void *data)
+static int led_proc_show(struct seq_file *m, void *v)
 {
-        int len = 0;
-
         if (get_auxio() & AUXIO_LED)
-                len = sprintf(buf, "on\n");
+                seq_puts(m, "on\n");
         else
-                len = sprintf(buf, "off\n");
+                seq_puts(m, "off\n");
+        return 0;
+}
 
-        return len;
+static int led_proc_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, led_proc_show, NULL);
 }
 
-static int led_write_proc(struct file *file, const char __user *buffer,
-                          unsigned long count, void *data)
+static ssize_t led_proc_write(struct file *file, const char __user *buffer,
+                              size_t count, loff_t *ppos)
 {
         char *buf = NULL;
 
@@ -103,6 +105,15 @@ static int led_write_proc(struct file *file, const char __user *buffer,
         return count;
 }
 
+static const struct file_operations led_proc_fops = {
+        .owner          = THIS_MODULE,
+        .open           = led_proc_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+        .write          = led_proc_write,
+};
+
 static struct proc_dir_entry *led;
 
 #define LED_VERSION     "0.1"
@@ -112,12 +123,9 @@ static int __init led_init(void)
         init_timer(&led_blink_timer);
         led_blink_timer.function = led_blink;
 
-        led = create_proc_entry("led", 0, NULL);
+        led = proc_create("led", 0, NULL, &led_proc_fops);
         if (!led)
                 return -ENOMEM;
-
-        led->read_proc = led_read_proc; /* reader function */
-        led->write_proc = led_write_proc; /* writer function */
         led->owner = THIS_MODULE;
 
         printk(KERN_INFO
diff --git a/arch/sparc/kernel/muldiv.c b/arch/sparc/kernel/muldiv.c
index 37b9a4942232..e352239e72c8 100644
--- a/arch/sparc/kernel/muldiv.c
+++ b/arch/sparc/kernel/muldiv.c
@@ -1,4 +1,4 @@
-/* $Id: muldiv.c,v 1.5 1997/12/15 20:07:20 ecd Exp $
+/*
  * muldiv.c: Hardware multiply/division illegal instruction trap
  *              for sun4c/sun4 (which do not have those instructions)
  *
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index b27b5b56f77a..ce30082ab266 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -1,4 +1,4 @@
-/* $Id: rtrap.S,v 1.58 2002/01/31 03:30:05 davem Exp $
+/*
  * rtrap.S: Return from Sparc trap low-level code.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
@@ -139,7 +139,7 @@ ret_trap_userwins_ok:
         LOAD_PT_PRIV(sp, t_psr, t_pc, t_npc)
         or      %t_pc, %t_npc, %g2
         andcc   %g2, 0x3, %g0
-        sethi   %hi(PSR_SYCALL), %g2
+        sethi   %hi(PSR_SYSCALL), %g2
         be      1f
          andn   %t_psr, %g2, %t_psr
 
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index 8a55c4f0df84..a0ea0bc6f471 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -1,4 +1,4 @@
-/*  $Id: setup.c,v 1.126 2001/11/13 00:49:27 davem Exp $
+/*
  *  linux/arch/sparc/kernel/setup.c
  *
  *  Copyright (C) 1995  David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index aa8ee06cf488..b23cea5ca5d1 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -1,4 +1,4 @@
-/* $Id: sparc_ksyms.c,v 1.107 2001/07/17 16:17:33 anton Exp $
+/*
  * arch/sparc/kernel/ksyms.c: Sparc specific ksyms support.
  *
  * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index e0efab2a6bef..8ac5661cafff 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -1,4 +1,4 @@
-/*  $Id: sun4d_irq.c,v 1.29 2001/12/11 04:55:51 davem Exp $
+/*
  *  arch/sparc/kernel/sun4d_irq.c:
  *                      SS1000/SC2000 interrupt handling.
  *
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index e995491c4436..3c6b49a53ae8 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -219,7 +219,7 @@ out:
         return err;
 }
 
-int sparc_mmap_check(unsigned long addr, unsigned long len, unsigned long flags)
+int sparc_mmap_check(unsigned long addr, unsigned long len)
 {
         if (ARCH_SUN4C_SUN4 &&
             (len > 0x20000000 ||
@@ -295,52 +295,14 @@ asmlinkage unsigned long sparc_mremap(unsigned long addr,
         unsigned long old_len, unsigned long new_len,
         unsigned long flags, unsigned long new_addr)
 {
-        struct vm_area_struct *vma;
         unsigned long ret = -EINVAL;
-        if (ARCH_SUN4C_SUN4) {
-                if (old_len > 0x20000000 || new_len > 0x20000000)
-                        goto out;
-                if (addr < 0xe0000000 && addr + old_len > 0x20000000)
-                        goto out;
-        }
-        if (old_len > TASK_SIZE - PAGE_SIZE ||
-            new_len > TASK_SIZE - PAGE_SIZE)
+
+        if (unlikely(sparc_mmap_check(addr, old_len)))
+                goto out;
+        if (unlikely(sparc_mmap_check(new_addr, new_len)))
                 goto out;
         down_write(&current->mm->mmap_sem);
-        if (flags & MREMAP_FIXED) {
-                if (ARCH_SUN4C_SUN4 &&
-                    new_addr < 0xe0000000 &&
-                    new_addr + new_len > 0x20000000)
-                        goto out_sem;
-                if (new_addr + new_len > TASK_SIZE - PAGE_SIZE)
-                        goto out_sem;
-        } else if ((ARCH_SUN4C_SUN4 && addr < 0xe0000000 &&
-                    addr + new_len > 0x20000000) ||
-                   addr + new_len > TASK_SIZE - PAGE_SIZE) {
-                unsigned long map_flags = 0;
-                struct file *file = NULL;
-
-                ret = -ENOMEM;
-                if (!(flags & MREMAP_MAYMOVE))
-                        goto out_sem;
-
-                vma = find_vma(current->mm, addr);
-                if (vma) {
-                        if (vma->vm_flags & VM_SHARED)
-                                map_flags |= MAP_SHARED;
-                        file = vma->vm_file;
-                }
-
-                new_addr = get_unmapped_area(file, addr, new_len,
-                                     vma ? vma->vm_pgoff : 0,
-                                     map_flags);
-                ret = new_addr;
-                if (new_addr & ~PAGE_MASK)
-                        goto out_sem;
-                flags |= MREMAP_FIXED;
-        }
         ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-out_sem:
         up_write(&current->mm->mmap_sem);
 out:
         return ret;       
diff --git a/arch/sparc/kernel/trampoline.S b/arch/sparc/kernel/trampoline.S
index 2dcdaa1fd8cd..356c56aebc62 100644
--- a/arch/sparc/kernel/trampoline.S
+++ b/arch/sparc/kernel/trampoline.S
@@ -1,4 +1,4 @@
-/* $Id: trampoline.S,v 1.14 2002/01/11 08:45:38 davem Exp $
+/*
  * trampoline.S: SMP cpu boot-up trampoline code.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c
index d404e7994527..978e9d85949e 100644
--- a/arch/sparc/kernel/traps.c
+++ b/arch/sparc/kernel/traps.c
@@ -1,4 +1,4 @@
-/* $Id: traps.c,v 1.64 2000/09/03 15:00:49 anton Exp $
+/*
  * arch/sparc/kernel/traps.c
  *
  * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/unaligned.c b/arch/sparc/kernel/unaligned.c
index 33857be16661..c2a28c5ad650 100644
--- a/arch/sparc/kernel/unaligned.c
+++ b/arch/sparc/kernel/unaligned.c
@@ -1,4 +1,4 @@
-/* $Id: unaligned.c,v 1.23 2001/12/21 00:54:31 davem Exp $
+/*
  * unaligned.c: Unaligned load/store trap handling with special
  *              cases for the kernel to do them more quickly.
  *
diff --git a/arch/sparc/kernel/wof.S b/arch/sparc/kernel/wof.S
index 083b1215d515..4bce38dfe3c5 100644
--- a/arch/sparc/kernel/wof.S
+++ b/arch/sparc/kernel/wof.S
@@ -1,4 +1,4 @@
-/* $Id: wof.S,v 1.40 2000/01/08 16:38:18 anton Exp $
+/*
  * wof.S: Sparc window overflow handler.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/wuf.S b/arch/sparc/kernel/wuf.S
index d1a266bf103a..82e5145b0f77 100644
--- a/arch/sparc/kernel/wuf.S
+++ b/arch/sparc/kernel/wuf.S
@@ -1,4 +1,4 @@
-/* $Id: wuf.S,v 1.39 2000/01/08 16:38:18 anton Exp $
+/*
  * wuf.S: Window underflow trap handler for the Sparc.
  *
  * Copyright (C) 1995 David S. Miller
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index 76effdbea075..6e303e10c3b9 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.35 2000/12/15 00:41:18 davem Exp $
 # Makefile for Sparc library files..
 #
 
diff --git a/arch/sparc/lib/ashldi3.S b/arch/sparc/lib/ashldi3.S
index 52418a0cb3dd..17912e608716 100644
--- a/arch/sparc/lib/ashldi3.S
+++ b/arch/sparc/lib/ashldi3.S
@@ -1,4 +1,4 @@
-/* $Id: ashldi3.S,v 1.2 1999/11/19 04:11:46 davem Exp $
+/*
  * ashldi3.S:   GCC emits these for certain drivers playing
  *              with long longs.
  *
diff --git a/arch/sparc/lib/ashrdi3.S b/arch/sparc/lib/ashrdi3.S
index 2848237598a4..85398fd6dcc9 100644
--- a/arch/sparc/lib/ashrdi3.S
+++ b/arch/sparc/lib/ashrdi3.S
@@ -1,4 +1,4 @@
-/* $Id: ashrdi3.S,v 1.4 1999/11/19 04:11:49 davem Exp $
+/*
  * ashrdi3.S:   The filesystem code creates all kinds of references to
  *              this little routine on the sparc with gcc.
  *
diff --git a/arch/sparc/lib/blockops.S b/arch/sparc/lib/blockops.S
index a7c7ffaa4a94..804be87f9a42 100644
--- a/arch/sparc/lib/blockops.S
+++ b/arch/sparc/lib/blockops.S
@@ -1,4 +1,4 @@
-/* $Id: blockops.S,v 1.8 1998/01/30 10:58:44 jj Exp $
+/*
  * blockops.S: Common block zero optimized routines.
  *
  * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/lib/locks.S b/arch/sparc/lib/locks.S
index b1df55cb2215..64f53f2b673d 100644
--- a/arch/sparc/lib/locks.S
+++ b/arch/sparc/lib/locks.S
@@ -1,4 +1,4 @@
-/* $Id: locks.S,v 1.16 2000/02/26 11:02:47 anton Exp $
+/*
  * locks.S: SMP low-level lock primitives on Sparc.
  *
  * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/lib/lshrdi3.S b/arch/sparc/lib/lshrdi3.S
index 35abf5b2bd15..47a1354c1602 100644
--- a/arch/sparc/lib/lshrdi3.S
+++ b/arch/sparc/lib/lshrdi3.S
@@ -1,4 +1,3 @@
-/* $Id: lshrdi3.S,v 1.1 1999/03/21 06:37:45 davem Exp $ */
 
         .globl  __lshrdi3
 __lshrdi3:
diff --git a/arch/sparc/lib/memscan.S b/arch/sparc/lib/memscan.S
index 28e78ff090ac..4ff1657dfc24 100644
--- a/arch/sparc/lib/memscan.S
+++ b/arch/sparc/lib/memscan.S
@@ -1,4 +1,4 @@
-/* $Id: memscan.S,v 1.4 1996/09/08 02:01:20 davem Exp $
+/*
  * memscan.S: Optimized memscan for the Sparc.
  *
  * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/lib/mul.S b/arch/sparc/lib/mul.S
index da693560d878..c45470d0b0ce 100644
--- a/arch/sparc/lib/mul.S
+++ b/arch/sparc/lib/mul.S
@@ -1,4 +1,4 @@
-/* $Id: mul.S,v 1.4 1996/09/30 02:22:32 davem Exp $
+/*
  * mul.S:       This routine was taken from glibc-1.09 and is covered
  *              by the GNU Library General Public License Version 2.
  */
diff --git a/arch/sparc/lib/rem.S b/arch/sparc/lib/rem.S
index bf015a90d07e..42fb86252815 100644
--- a/arch/sparc/lib/rem.S
+++ b/arch/sparc/lib/rem.S
@@ -1,4 +1,4 @@
-/* $Id: rem.S,v 1.7 1996/09/30 02:22:34 davem Exp $
+/*
  * rem.S:       This routine was taken from glibc-1.09 and is covered
  *              by the GNU Library General Public License Version 2.
  */
diff --git a/arch/sparc/lib/rwsem.S b/arch/sparc/lib/rwsem.S
index f406b1f22791..9675268e7fde 100644
--- a/arch/sparc/lib/rwsem.S
+++ b/arch/sparc/lib/rwsem.S
@@ -1,4 +1,4 @@
-/* $Id: rwsem.S,v 1.5 2000/05/09 17:40:13 davem Exp $
+/*
  * Assembly part of rw semaphores.
  *
  * Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
diff --git a/arch/sparc/lib/sdiv.S b/arch/sparc/lib/sdiv.S
index af9451629d0b..f0a0d4e4db78 100644
--- a/arch/sparc/lib/sdiv.S
+++ b/arch/sparc/lib/sdiv.S
@@ -1,4 +1,4 @@
-/* $Id: sdiv.S,v 1.6 1996/10/02 17:37:00 davem Exp $
+/*
  * sdiv.S:      This routine was taken from glibc-1.09 and is covered
  *              by the GNU Library General Public License Version 2.
  */
diff --git a/arch/sparc/lib/strncmp.S b/arch/sparc/lib/strncmp.S
index 615626805d4b..494ec664537a 100644
--- a/arch/sparc/lib/strncmp.S
+++ b/arch/sparc/lib/strncmp.S
@@ -1,4 +1,4 @@
-/* $Id: strncmp.S,v 1.2 1996/09/09 02:47:20 davem Exp $
+/*
  * strncmp.S: Hand optimized Sparc assembly of GCC output from GNU libc
  *            generic strncmp routine.
  */
diff --git a/arch/sparc/lib/udiv.S b/arch/sparc/lib/udiv.S
index 169e01da6715..2101405bdfcb 100644
--- a/arch/sparc/lib/udiv.S
+++ b/arch/sparc/lib/udiv.S
@@ -1,4 +1,4 @@
-/* $Id: udiv.S,v 1.4 1996/09/30 02:22:38 davem Exp $
+/*
  * udiv.S:      This routine was taken from glibc-1.09 and is covered
  *              by the GNU Library General Public License Version 2.
  */
diff --git a/arch/sparc/lib/umul.S b/arch/sparc/lib/umul.S
index f0e5b20a2536..1f36ae682529 100644
--- a/arch/sparc/lib/umul.S
+++ b/arch/sparc/lib/umul.S
@@ -1,4 +1,4 @@
-/* $Id: umul.S,v 1.4 1996/09/30 02:22:39 davem Exp $
+/*
  * umul.S:      This routine was taken from glibc-1.09 and is covered
  *              by the GNU Library General Public License Version 2.
  */
diff --git a/arch/sparc/lib/urem.S b/arch/sparc/lib/urem.S
index 6b92bdc8b04c..77123eb83c44 100644
--- a/arch/sparc/lib/urem.S
+++ b/arch/sparc/lib/urem.S
@@ -1,4 +1,4 @@
-/* $Id: urem.S,v 1.4 1996/09/30 02:22:42 davem Exp $
+/*
  * urem.S:      This routine was taken from glibc-1.09 and is covered
  *              by the GNU Library General Public License Version 2.
  */
diff --git a/arch/sparc/math-emu/ashldi3.S b/arch/sparc/math-emu/ashldi3.S
index eab1d097296a..7230ff5c7aa1 100644
--- a/arch/sparc/math-emu/ashldi3.S
+++ b/arch/sparc/math-emu/ashldi3.S
@@ -1,4 +1,4 @@
-/* $Id: ashldi3.S,v 1.1 1998/04/06 16:09:28 jj Exp $
+/*
  * ashldi3.S:   Math-emu code creates all kinds of references to
  *              this little routine on the sparc with gcc.
  *
diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile
index 16eeba4b991a..109c8b22cb38 100644
--- a/arch/sparc/mm/Makefile
+++ b/arch/sparc/mm/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.38 2000/12/15 00:41:22 davem Exp $
 # Makefile for the linux Sparc-specific parts of the memory manager.
 #
 
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index abd50795a7b6..0a3cd8f6cfe4 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -1,4 +1,4 @@
-/* $Id: fault.c,v 1.122 2001/11/17 07:19:26 davem Exp $
+/*
  * fault.c:  Page fault handlers for the Sparc.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/mm/generic.c b/arch/sparc/mm/generic.c
index 1ef7fa03fefe..a289261da9fd 100644
--- a/arch/sparc/mm/generic.c
+++ b/arch/sparc/mm/generic.c
@@ -1,4 +1,4 @@
-/* $Id: generic.c,v 1.14 2001/12/21 04:56:15 davem Exp $
+/*
  * generic.c: Generic Sparc mm routines that are not dependent upon
  *            MMU type but are Sparc specific.
  *
diff --git a/arch/sparc/mm/hypersparc.S b/arch/sparc/mm/hypersparc.S
index d29cc24c5bba..44aad32eeb4e 100644
--- a/arch/sparc/mm/hypersparc.S
+++ b/arch/sparc/mm/hypersparc.S
@@ -1,4 +1,4 @@
-/* $Id: hypersparc.S,v 1.18 2001/12/21 04:56:15 davem Exp $
+/*
  * hypersparc.S: High speed Hypersparc mmu/cache operations.
  *
  * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c
index b89837accc88..7794ecb896e3 100644
--- a/arch/sparc/mm/init.c
+++ b/arch/sparc/mm/init.c
@@ -1,4 +1,4 @@
-/*  $Id: init.c,v 1.103 2001/11/19 19:03:08 davem Exp $
+/*
  *  linux/arch/sparc/mm/init.c
  *
  *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c
index b86dfce8eee4..f167835db3df 100644
--- a/arch/sparc/mm/io-unit.c
+++ b/arch/sparc/mm/io-unit.c
@@ -1,4 +1,4 @@
-/* $Id: io-unit.c,v 1.24 2001/12/17 07:05:09 davem Exp $
+/*
  * io-unit.c:  IO-UNIT specific routines for memory management.
  *
  * Copyright (C) 1997,1998 Jakub Jelinek    (jj@sunsite.mff.cuni.cz)
diff --git a/arch/sparc/mm/loadmmu.c b/arch/sparc/mm/loadmmu.c
index 2d9cd65160a4..652be05acbea 100644
--- a/arch/sparc/mm/loadmmu.c
+++ b/arch/sparc/mm/loadmmu.c
@@ -1,4 +1,4 @@
-/* $Id: loadmmu.c,v 1.56 2000/02/08 20:24:21 davem Exp $
+/*
  * loadmmu.c:  This code loads up all the mm function pointers once the
  *             machine type has been determined.  It also sets the static
  *             mmu values such as PAGE_NONE, etc.
diff --git a/arch/sparc/mm/nosrmmu.c b/arch/sparc/mm/nosrmmu.c
index 9e215659697e..3701f70fc30a 100644
--- a/arch/sparc/mm/nosrmmu.c
+++ b/arch/sparc/mm/nosrmmu.c
@@ -1,4 +1,4 @@
-/* $Id: nosrmmu.c,v 1.5 1999/11/19 04:11:54 davem Exp $
+/*
  * nosrmmu.c: This file is a bunch of dummies for sun4 compiles, 
  *         so that it does not need srmmu and avoid ifdefs.
  *
diff --git a/arch/sparc/mm/nosun4c.c b/arch/sparc/mm/nosun4c.c
index ea2e2105341d..196263f895b7 100644
--- a/arch/sparc/mm/nosun4c.c
+++ b/arch/sparc/mm/nosun4c.c
@@ -1,4 +1,4 @@
-/* $Id: nosun4c.c,v 1.3 2000/02/14 04:52:36 jj Exp $
+/*
  * nosun4c.c: This file is a bunch of dummies for SMP compiles, 
  *         so that it does not need sun4c and avoid ifdefs.
  *
diff --git a/arch/sparc/mm/swift.S b/arch/sparc/mm/swift.S
index 9f4cd396a0fa..c801c3953a00 100644
--- a/arch/sparc/mm/swift.S
+++ b/arch/sparc/mm/swift.S
@@ -1,4 +1,4 @@
-/* $Id: swift.S,v 1.9 2002/01/08 11:11:59 davem Exp $
+/*
  * swift.S: MicroSparc-II mmu/cache operations.
  *
  * Copyright (C) 1999 David S. Miller (davem@redhat.com)
diff --git a/arch/sparc/mm/tsunami.S b/arch/sparc/mm/tsunami.S
index 4988e6a310bb..db0d6de33a87 100644
--- a/arch/sparc/mm/tsunami.S
+++ b/arch/sparc/mm/tsunami.S
@@ -1,4 +1,4 @@
-/* $Id: tsunami.S,v 1.7 2001/12/21 04:56:15 davem Exp $
+/*
  * tsunami.S: High speed MicroSparc-I mmu/cache operations.
  *
  * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/mm/viking.S b/arch/sparc/mm/viking.S
index 754c622548a5..6dfcc13d3100 100644
--- a/arch/sparc/mm/viking.S
+++ b/arch/sparc/mm/viking.S
@@ -1,4 +1,4 @@
-/* $Id: viking.S,v 1.19 2001/12/21 04:56:15 davem Exp $
+/*
  * viking.S: High speed Viking cache/mmu operations
  *
  * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile
index 2b217ee40703..7f5eacfcfbcf 100644
--- a/arch/sparc/prom/Makefile
+++ b/arch/sparc/prom/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.8 2000/12/15 00:41:22 davem Exp $
 # Makefile for the Sun Boot PROM interface library under
 # Linux.
 #
diff --git a/arch/sparc/prom/bootstr.c b/arch/sparc/prom/bootstr.c
index cfdeac2788d1..5a35c768ff7c 100644
--- a/arch/sparc/prom/bootstr.c
+++ b/arch/sparc/prom/bootstr.c
@@ -1,4 +1,4 @@
-/* $Id: bootstr.c,v 1.20 2000/02/08 20:24:23 davem Exp $
+/*
  * bootstr.c:  Boot string/argument acquisition from the PROM.
  *
  * Copyright(C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/prom/console.c b/arch/sparc/prom/console.c
index 2a007a784415..790057a34616 100644
--- a/arch/sparc/prom/console.c
+++ b/arch/sparc/prom/console.c
@@ -1,4 +1,4 @@
-/* $Id: console.c,v 1.25 2001/10/30 04:54:22 davem Exp $
+/*
  * console.c: Routines that deal with sending and receiving IO
  *            to/from the current console device using the PROM.
  *
diff --git a/arch/sparc/prom/devmap.c b/arch/sparc/prom/devmap.c
index eb12073578ad..1e517915b0df 100644
--- a/arch/sparc/prom/devmap.c
+++ b/arch/sparc/prom/devmap.c
@@ -1,4 +1,4 @@
-/* $Id: devmap.c,v 1.7 2000/08/26 02:38:03 anton Exp $
+/*
  * promdevmap.c:  Map device/IO areas to virtual addresses.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/prom/devops.c b/arch/sparc/prom/devops.c
index 61919b54f6cc..9f1a95c91ad1 100644
--- a/arch/sparc/prom/devops.c
+++ b/arch/sparc/prom/devops.c
@@ -1,4 +1,4 @@
-/* $Id: devops.c,v 1.13 2000/08/26 02:38:03 anton Exp $
+/*
  * devops.c:  Device operations using the PROM.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/prom/init.c b/arch/sparc/prom/init.c
index 2fa3a474e3a2..729f87066945 100644
--- a/arch/sparc/prom/init.c
+++ b/arch/sparc/prom/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.14 2000/01/29 01:09:12 anton Exp $
+/*
  * init.c:  Initialize internal variables used by the PROM
  *          library functions.
  *
diff --git a/arch/sparc/prom/misc.c b/arch/sparc/prom/misc.c
index d9fb3af41c1f..49b5057b9601 100644
--- a/arch/sparc/prom/misc.c
+++ b/arch/sparc/prom/misc.c
@@ -1,4 +1,4 @@
-/* $Id: misc.c,v 1.18 2000/08/26 02:38:03 anton Exp $
+/*
  * misc.c:  Miscellaneous prom functions that don't belong
  *          anywhere else.
  *
diff --git a/arch/sparc/prom/mp.c b/arch/sparc/prom/mp.c
index 92fe3739fdb8..4c4dc79f65af 100644
--- a/arch/sparc/prom/mp.c
+++ b/arch/sparc/prom/mp.c
@@ -1,4 +1,4 @@
-/* $Id: mp.c,v 1.12 2000/08/26 02:38:03 anton Exp $
+/*
  * mp.c:  OpenBoot Prom Multiprocessor support routines.  Don't call
  *        these on a UP or else you will halt and catch fire. ;)
  *
diff --git a/arch/sparc/prom/palloc.c b/arch/sparc/prom/palloc.c
index 84ce8bc54473..20be339cc2ce 100644
--- a/arch/sparc/prom/palloc.c
+++ b/arch/sparc/prom/palloc.c
@@ -1,4 +1,4 @@
-/* $Id: palloc.c,v 1.4 1996/04/25 06:09:48 davem Exp $
+/*
  * palloc.c:  Memory allocation from the Sun PROM.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/prom/ranges.c b/arch/sparc/prom/ranges.c
index a2920323c900..f9b7def35f6e 100644
--- a/arch/sparc/prom/ranges.c
+++ b/arch/sparc/prom/ranges.c
@@ -1,4 +1,4 @@
-/* $Id: ranges.c,v 1.15 2001/12/19 00:29:51 davem Exp $
+/*
  * ranges.c: Handle ranges in newer proms for obio/sbus.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/prom/segment.c b/arch/sparc/prom/segment.c
index 09d6460165ab..04fd03a7f926 100644
--- a/arch/sparc/prom/segment.c
+++ b/arch/sparc/prom/segment.c
@@ -1,4 +1,4 @@
-/* $Id: segment.c,v 1.7 2000/08/26 02:38:03 anton Exp $
+/*
  * segment.c:  Prom routine to map segments in other contexts before
  *             a standalone is completely mapped.  This is for sun4 and
  *             sun4c architectures only.
diff --git a/arch/sparc/prom/tree.c b/arch/sparc/prom/tree.c
index 5ec246573a98..f228fe057b24 100644
--- a/arch/sparc/prom/tree.c
+++ b/arch/sparc/prom/tree.c
@@ -1,4 +1,4 @@
-/* $Id: tree.c,v 1.26 2000/08/26 02:38:03 anton Exp $
+/*
  * tree.c: Basic device tree traversal/scanning for the Linux
  *         prom library.
  *
diff --git a/arch/sparc64/Makefile b/arch/sparc64/Makefile
index 9cb75c852b45..4b8f2b084c21 100644
--- a/arch/sparc64/Makefile
+++ b/arch/sparc64/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.52 2002/02/09 19:49:31 davem Exp $
 # sparc64/Makefile
 #
 # Makefile for the architecture dependent flags and dependencies on the
diff --git a/arch/sparc64/boot/Makefile b/arch/sparc64/boot/Makefile
index 6968a6da57da..0458b5244f09 100644
--- a/arch/sparc64/boot/Makefile
+++ b/arch/sparc64/boot/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.4 1997/12/15 20:08:56 ecd Exp $
 # Makefile for the Sparc64 boot stuff.
 #
 # Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/boot/piggyback.c b/arch/sparc64/boot/piggyback.c
index 36f907408c60..de364bfed0bb 100644
--- a/arch/sparc64/boot/piggyback.c
+++ b/arch/sparc64/boot/piggyback.c
@@ -1,4 +1,4 @@
-/* $Id: piggyback.c,v 1.2 2000/09/19 14:34:39 anton Exp $
+/*
    Simple utility to make a single-image install kernel with initial ramdisk
    for Sparc64 tftpbooting without need to set up nfs.
    
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index aff93c9d13f4..76eb832527f2 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sat Apr 26 03:11:06 2008
+# Linux kernel version: 2.6.26-rc2
+# Fri May 16 13:36:07 2008
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -74,6 +74,7 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -103,12 +104,14 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -170,6 +173,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
@@ -402,7 +406,6 @@ CONFIG_IDEPCI_PCIBUS_ORDER=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AEC62XX is not set
 CONFIG_BLK_DEV_ALI15X3=y
-# CONFIG_WDC_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
@@ -609,6 +612,7 @@ CONFIG_NIU=m
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -717,6 +721,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -793,12 +798,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -873,8 +873,17 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -893,8 +902,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1100,6 +1109,10 @@ CONFIG_SND_SUN_CS4231=m
 #
 
 #
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1135,10 +1148,12 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1173,6 +1188,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1214,6 +1230,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_UIO is not set
@@ -1367,6 +1384,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1377,6 +1395,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1402,6 +1421,8 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_DCFLUSH is not set
 # CONFIG_STACK_DEBUG is not set
@@ -1503,6 +1524,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/sparc64/kernel/dtlb_prot.S b/arch/sparc64/kernel/dtlb_prot.S
index e0a920162604..b2c2c5be281c 100644
--- a/arch/sparc64/kernel/dtlb_prot.S
+++ b/arch/sparc64/kernel/dtlb_prot.S
@@ -1,4 +1,4 @@
-/* $Id: dtlb_prot.S,v 1.22 2001/04/11 23:40:32 davem Exp $
+/*
  * dtlb_prot.S: DTLB protection trap strategy.
  *              This is included directly into the trap table.
  *
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index bc2632274840..c49d0388b793 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -1,4 +1,4 @@
-/* $Id: ebus.c,v 1.64 2001/11/08 04:41:33 davem Exp $
+/*
  * ebus.c: PCI to EBus bridge device.
  *
  * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S
index f25e1da3fd03..29ce489bc188 100644
--- a/arch/sparc64/kernel/etrap.S
+++ b/arch/sparc64/kernel/etrap.S
@@ -1,4 +1,4 @@
-/* $Id: etrap.S,v 1.46 2002/02/09 19:49:30 davem Exp $
+/*
  * etrap.S: Preparing for entry into the kernel on Sparc V9.
  *
  * Copyright (C) 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/kernel/idprom.c b/arch/sparc64/kernel/idprom.c
index 3b6789e09a72..5b45a808c621 100644
--- a/arch/sparc64/kernel/idprom.c
+++ b/arch/sparc64/kernel/idprom.c
@@ -1,4 +1,4 @@
-/* $Id: idprom.c,v 1.3 1999/08/31 06:54:53 davem Exp $
+/*
  * idprom.c: Routines to load the idprom into kernel addresses and
  *           interpret the data contained within.
  *
diff --git a/arch/sparc64/kernel/init_task.c b/arch/sparc64/kernel/init_task.c
index 90007cf88bac..d2b312381c19 100644
--- a/arch/sparc64/kernel/init_task.c
+++ b/arch/sparc64/kernel/init_task.c
@@ -10,7 +10,6 @@
 #include <asm/processor.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 4129c0449856..2084f81a76e1 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -1,6 +1,6 @@
 /*  arch/sparc64/kernel/process.c
  *
- *  Copyright (C) 1995, 1996 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1995, 1996, 2008 David S. Miller (davem@davemloft.net)
  *  Copyright (C) 1996       Eddie C. Dost   (ecd@skynet.be)
  *  Copyright (C) 1997, 1998 Jakub Jelinek   (jj@sunsite.mff.cuni.cz)
  */
@@ -30,6 +30,7 @@
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/elfcore.h>
+#include <linux/sysrq.h>
 
 #include <asm/oplib.h>
 #include <asm/uaccess.h>
@@ -49,6 +50,8 @@
 #include <asm/sstate.h>
 #include <asm/reboot.h>
 #include <asm/syscalls.h>
+#include <asm/irq_regs.h>
+#include <asm/smp.h>
 
 /* #define VERBOSE_SHOWREGS */
 
@@ -298,6 +301,118 @@ void show_regs(struct pt_regs *regs)
 #endif
 }
 
+#ifdef CONFIG_MAGIC_SYSRQ
+struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
+static DEFINE_SPINLOCK(global_reg_snapshot_lock);
+
+static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs,
+                              int this_cpu)
+{
+        flushw_all();
+
+        global_reg_snapshot[this_cpu].tstate = regs->tstate;
+        global_reg_snapshot[this_cpu].tpc = regs->tpc;
+        global_reg_snapshot[this_cpu].tnpc = regs->tnpc;
+        global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7];
+
+        if (regs->tstate & TSTATE_PRIV) {
+                struct reg_window *rw;
+
+                rw = (struct reg_window *)
+                        (regs->u_regs[UREG_FP] + STACK_BIAS);
+                global_reg_snapshot[this_cpu].i7 = rw->ins[6];
+        } else
+                global_reg_snapshot[this_cpu].i7 = 0;
+
+        global_reg_snapshot[this_cpu].thread = tp;
+}
+
+/* In order to avoid hangs we do not try to synchronize with the
+ * global register dump client cpus.  The last store they make is to
+ * the thread pointer, so do a short poll waiting for that to become
+ * non-NULL.
+ */
+static void __global_reg_poll(struct global_reg_snapshot *gp)
+{
+        int limit = 0;
+
+        while (!gp->thread && ++limit < 100) {
+                barrier();
+                udelay(1);
+        }
+}
+
+static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+{
+        struct thread_info *tp = current_thread_info();
+        struct pt_regs *regs = get_irq_regs();
+#ifdef CONFIG_KALLSYMS
+        char buffer[KSYM_SYMBOL_LEN];
+#endif
+        unsigned long flags;
+        int this_cpu, cpu;
+
+        if (!regs)
+                regs = tp->kregs;
+
+        spin_lock_irqsave(&global_reg_snapshot_lock, flags);
+
+        memset(global_reg_snapshot, 0, sizeof(global_reg_snapshot));
+
+        this_cpu = raw_smp_processor_id();
+
+        __global_reg_self(tp, regs, this_cpu);
+
+        smp_fetch_global_regs();
+
+        for_each_online_cpu(cpu) {
+                struct global_reg_snapshot *gp = &global_reg_snapshot[cpu];
+                struct thread_info *tp;
+
+                __global_reg_poll(gp);
+
+                tp = gp->thread;
+                printk("%c CPU[%3d]: TSTATE[%016lx] TPC[%016lx] TNPC[%016lx] TASK[%s:%d]\n",
+                       (cpu == this_cpu ? '*' : ' '), cpu,
+                       gp->tstate, gp->tpc, gp->tnpc,
+                       ((tp && tp->task) ? tp->task->comm : "NULL"),
+                       ((tp && tp->task) ? tp->task->pid : -1));
+#ifdef CONFIG_KALLSYMS
+                if (gp->tstate & TSTATE_PRIV) {
+                        sprint_symbol(buffer, gp->tpc);
+                        printk("             TPC[%s] ", buffer);
+                        sprint_symbol(buffer, gp->o7);
+                        printk("O7[%s] ", buffer);
+                        sprint_symbol(buffer, gp->i7);
+                        printk("I7[%s]\n", buffer);
+                } else
+#endif
+                {
+                        printk("             TPC[%lx] O7[%lx] I7[%lx]\n",
+                               gp->tpc, gp->o7, gp->i7);
+                }
+        }
+
+        memset(global_reg_snapshot, 0, sizeof(global_reg_snapshot));
+
+        spin_unlock_irqrestore(&global_reg_snapshot_lock, flags);
+}
+
+static struct sysrq_key_op sparc_globalreg_op = {
+        .handler        = sysrq_handle_globreg,
+        .help_msg       = "Globalregs",
+        .action_msg     = "Show Global CPU Regs",
+};
+
+static int __init sparc_globreg_init(void)
+{
+        return register_sysrq_key('y', &sparc_globalreg_op);
+}
+
+core_initcall(sparc_globreg_init);
+
+#endif
+
 unsigned long thread_saved_pc(struct task_struct *tsk)
 {
         struct thread_info *ti = task_thread_info(tsk);
@@ -542,20 +657,39 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
                 struct task_struct *p, struct pt_regs *regs)
 {
         struct thread_info *t = task_thread_info(p);
+        struct sparc_stackf *parent_sf;
+        unsigned long child_stack_sz;
         char *child_trap_frame;
+        int kernel_thread;
 
-        /* Calculate offset to stack_frame & pt_regs */
-        child_trap_frame = task_stack_page(p) + (THREAD_SIZE - (TRACEREG_SZ+STACKFRAME_SZ));
-        memcpy(child_trap_frame, (((struct sparc_stackf *)regs)-1), (TRACEREG_SZ+STACKFRAME_SZ));
+        kernel_thread = (regs->tstate & TSTATE_PRIV) ? 1 : 0;
+        parent_sf = ((struct sparc_stackf *) regs) - 1;
 
-        t->flags = (t->flags & ~((0xffUL << TI_FLAG_CWP_SHIFT) | (0xffUL << TI_FLAG_CURRENT_DS_SHIFT))) |
+        /* Calculate offset to stack_frame & pt_regs */
+        child_stack_sz = ((STACKFRAME_SZ + TRACEREG_SZ) +
+                          (kernel_thread ? STACKFRAME_SZ : 0));
+        child_trap_frame = (task_stack_page(p) +
+                            (THREAD_SIZE - child_stack_sz));
+        memcpy(child_trap_frame, parent_sf, child_stack_sz);
+
+        t->flags = (t->flags & ~((0xffUL << TI_FLAG_CWP_SHIFT) |
+                                 (0xffUL << TI_FLAG_CURRENT_DS_SHIFT))) |
                 (((regs->tstate + 1) & TSTATE_CWP) << TI_FLAG_CWP_SHIFT);
         t->new_child = 1;
         t->ksp = ((unsigned long) child_trap_frame) - STACK_BIAS;
-        t->kregs = (struct pt_regs *)(child_trap_frame+sizeof(struct sparc_stackf));
+        t->kregs = (struct pt_regs *) (child_trap_frame +
+                                       sizeof(struct sparc_stackf));
         t->fpsaved[0] = 0;
 
-        if (regs->tstate & TSTATE_PRIV) {
+        if (kernel_thread) {
+                struct sparc_stackf *child_sf = (struct sparc_stackf *)
+                        (child_trap_frame + (STACKFRAME_SZ + TRACEREG_SZ));
+
+                /* Zero terminate the stack backtrace.  */
+                child_sf->fp = NULL;
+                t->kregs->u_regs[UREG_FP] =
+                  ((unsigned long) child_sf) - STACK_BIAS;
+
                 /* Special case, if we are spawning a kernel thread from
                  * a userspace task (via KMOD, NFS, or similar) we must
                  * disable performance counters in the child because the
@@ -566,12 +700,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
                         t->pcr_reg = 0;
                         t->flags &= ~_TIF_PERFCTR;
                 }
-                t->kregs->u_regs[UREG_FP] = t->ksp;
                 t->flags |= ((long)ASI_P << TI_FLAG_CURRENT_DS_SHIFT);
-                flush_register_windows();
-                memcpy((void *)(t->ksp + STACK_BIAS),
-                       (void *)(regs->u_regs[UREG_FP] + STACK_BIAS),
-                       sizeof(struct sparc_stackf));
                 t->kregs->u_regs[UREG_G6] = (unsigned long) t;
                 t->kregs->u_regs[UREG_G4] = (unsigned long) t->task;
         } else {
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index b9b785fd8b46..c6fc695fe1fe 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -1,4 +1,4 @@
-/* $Id: rtrap.S,v 1.61 2002/02/09 19:49:31 davem Exp $
+/*
  * rtrap.S: Preparing for return from trap on Sparc V9.
  *
  * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
@@ -46,7 +46,7 @@ __handle_user_windows:
                 wrpr                    %g0, RTRAP_PSTATE_IRQOFF, %pstate
                 ldx                     [%g6 + TI_FLAGS], %l0
 
-1:              andcc                   %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
+1:              andcc                   %l0, _TIF_SIGPENDING, %g0
                 be,pt                   %xcc, __handle_user_windows_continue
                  nop
                 mov                     %l5, %o1
@@ -86,7 +86,7 @@ __handle_perfctrs:
                  wrpr                   %g0, RTRAP_PSTATE, %pstate
                 wrpr                    %g0, RTRAP_PSTATE_IRQOFF, %pstate
                 ldx                     [%g6 + TI_FLAGS], %l0
-1:              andcc                   %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
+1:              andcc                   %l0, _TIF_SIGPENDING, %g0
 
                 be,pt                   %xcc, __handle_perfctrs_continue
                  sethi                  %hi(TSTATE_PEF), %o0
@@ -195,7 +195,7 @@ __handle_preemption_continue:
                  andcc                  %l1, %o0, %g0
                 andcc                   %l0, _TIF_NEED_RESCHED, %g0
                 bne,pn                  %xcc, __handle_preemption
-                 andcc                  %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
+                 andcc                  %l0, _TIF_SIGPENDING, %g0
                 bne,pn                  %xcc, __handle_signal
 __handle_signal_continue:
                  ldub                   [%g6 + TI_WSAVED], %o2
@@ -363,6 +363,7 @@ kern_rtt:	rdpr			%canrestore, %g1
                 brz,pn                  %g1, kern_rtt_fill
                  nop
 kern_rtt_restore:
+                stw                     %g0, [%sp + PTREGS_OFF + PT_V9_MAGIC]
                 restore
                 retry
 
diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c
index fa2827c4a3ad..e33a8a660e9e 100644
--- a/arch/sparc64/kernel/sbus.c
+++ b/arch/sparc64/kernel/sbus.c
@@ -1,4 +1,4 @@
-/* $Id: sbus.c,v 1.19 2002/01/23 11:27:32 davem Exp $
+/*
  * sbus.c: UltraSparc SBUS controller support.
  *
  * Copyright (C) 1999 David S. Miller (davem@redhat.com)
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index da5e6ee0c661..c8b03a4f68bf 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -1,4 +1,4 @@
-/*  $Id: setup.c,v 1.72 2002/02/09 19:49:30 davem Exp $
+/*
  *  linux/arch/sparc64/kernel/setup.c
  *
  *  Copyright (C) 1995,1996  David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index 2378482c2aab..9667e96fd513 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -1,4 +1,4 @@
-/*  $Id: signal.c,v 1.60 2002/02/09 19:49:31 davem Exp $
+/*
  *  arch/sparc64/kernel/signal.c
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
@@ -247,7 +247,9 @@ static long _sigpause_common(old_sigset_t set)
 
         current->state = TASK_INTERRUPTIBLE;
         schedule();
-        set_thread_flag(TIF_RESTORE_SIGMASK);
+
+        set_restore_sigmask();
+
         return -ERESTARTNOHAND;
 }
 
@@ -537,7 +539,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
         } else
                 restart_syscall = 0;
 
-        if (test_thread_flag(TIF_RESTORE_SIGMASK))
+        if (current_thread_info()->status & TS_RESTORE_SIGMASK)
                 oldset = &current->saved_sigmask;
         else
                 oldset = &current->blocked;
@@ -566,13 +568,12 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
                         syscall_restart(orig_i0, regs, &ka.sa);
                 handle_signal(signr, &ka, &info, oldset, regs);
 
-                /* a signal was successfully delivered; the saved
+                /* A signal was successfully delivered; the saved
                  * sigmask will have been stored in the signal frame,
                  * and will be restored by sigreturn, so we can simply
-                 * clear the TIF_RESTORE_SIGMASK flag.
+                 * clear the TS_RESTORE_SIGMASK flag.
                  */
-                if (test_thread_flag(TIF_RESTORE_SIGMASK))
-                        clear_thread_flag(TIF_RESTORE_SIGMASK);
+                current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
                 return;
         }
         if (restart_syscall &&
@@ -591,17 +592,17 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
                 regs->tnpc -= 4;
         }
 
-        /* if there's no signal to deliver, we just put the saved sigmask
+        /* If there's no signal to deliver, we just put the saved sigmask
          * back
          */
-        if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-                clear_thread_flag(TIF_RESTORE_SIGMASK);
+        if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+                current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
                 sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
         }
 }
 
 void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long thread_info_flags)
 {
-        if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+        if (thread_info_flags & _TIF_SIGPENDING)
                 do_signal(regs, orig_i0);
 }
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 3f19e9af3d1b..97cdd1bf4a10 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -788,13 +788,12 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
                         syscall_restart32(orig_i0, regs, &ka.sa);
                 handle_signal32(signr, &ka, &info, oldset, regs);
 
-                /* a signal was successfully delivered; the saved
+                /* A signal was successfully delivered; the saved
                  * sigmask will have been stored in the signal frame,
                  * and will be restored by sigreturn, so we can simply
-                 * clear the TIF_RESTORE_SIGMASK flag.
+                 * clear the TS_RESTORE_SIGMASK flag.
                  */
-                if (test_thread_flag(TIF_RESTORE_SIGMASK))
-                        clear_thread_flag(TIF_RESTORE_SIGMASK);
+                current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
                 return;
         }
         if (restart_syscall &&
@@ -813,11 +812,11 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
                 regs->tnpc -= 4;
         }
 
-        /* if there's no signal to deliver, we just put the saved sigmask
+        /* If there's no signal to deliver, we just put the saved sigmask
          * back
          */
-        if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-                clear_thread_flag(TIF_RESTORE_SIGMASK);
+        if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+                current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
                 sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
         }
 }
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 0d6403a630ac..fa63c68a1819 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -900,6 +900,9 @@ extern unsigned long xcall_flush_tlb_mm;
 extern unsigned long xcall_flush_tlb_pending;
 extern unsigned long xcall_flush_tlb_kernel_range;
 extern unsigned long xcall_report_regs;
+#ifdef CONFIG_MAGIC_SYSRQ
+extern unsigned long xcall_fetch_glob_regs;
+#endif
 extern unsigned long xcall_receive_signal;
 extern unsigned long xcall_new_mmu_context_version;
 #ifdef CONFIG_KGDB
@@ -1080,6 +1083,13 @@ void smp_report_regs(void)
         smp_cross_call(&xcall_report_regs, 0, 0, 0);
 }
 
+#ifdef CONFIG_MAGIC_SYSRQ
+void smp_fetch_global_regs(void)
+{
+        smp_cross_call(&xcall_fetch_glob_regs, 0, 0, 0);
+}
+#endif
+
 /* We know that the window frames of the user have been flushed
  * to the stack before we get here because all callers of us
  * are flush_tlb_*() routines, and these run after flush_cache_*()
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index 01b52f561af4..c73ce3f4197e 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -19,7 +19,7 @@ void save_stack_trace(struct stack_trace *trace)
         fp = ksp + STACK_BIAS;
         thread_base = (unsigned long) tp;
         do {
-                struct reg_window *rw;
+                struct sparc_stackf *sf;
                 struct pt_regs *regs;
                 unsigned long pc;
 
@@ -28,15 +28,17 @@ void save_stack_trace(struct stack_trace *trace)
                     fp >= (thread_base + THREAD_SIZE))
                         break;
 
-                rw = (struct reg_window *) fp;
-                regs = (struct pt_regs *) (rw + 1);
+                sf = (struct sparc_stackf *) fp;
+                regs = (struct pt_regs *) (sf + 1);
 
                 if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+                        if (!(regs->tstate & TSTATE_PRIV))
+                                break;
                         pc = regs->tpc;
                         fp = regs->u_regs[UREG_I6] + STACK_BIAS;
                 } else {
-                        pc = rw->ins[7];
-                        fp = rw->ins[6] + STACK_BIAS;
+                        pc = sf->callers_pc;
+                        fp = (unsigned long)sf->fp + STACK_BIAS;
                 }
 
                 if (trace->skip > 0)
diff --git a/arch/sparc64/kernel/starfire.c b/arch/sparc64/kernel/starfire.c
index b930fee7708a..7461581b3bb9 100644
--- a/arch/sparc64/kernel/starfire.c
+++ b/arch/sparc64/kernel/starfire.c
@@ -1,4 +1,4 @@
-/* $Id: starfire.c,v 1.10 2001/04/14 21:13:45 davem Exp $
+/*
  * starfire.c: Starfire/E10000 support.
  *
  * Copyright (C) 1998 David S. Miller (davem@redhat.com)
diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S
index 010a737908ee..ade18ba0c686 100644
--- a/arch/sparc64/kernel/sys32.S
+++ b/arch/sparc64/kernel/sys32.S
@@ -1,4 +1,4 @@
-/* $Id: sys32.S,v 1.12 2000/03/24 04:17:37 davem Exp $
+/*
  * sys32.S: I-cache tricks for 32-bit compatibility layer simple
  *          conversions.
  *
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index 0dbc941f130e..ac1bff58c1ac 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -542,8 +542,7 @@ asmlinkage long sparc64_personality(unsigned long personality)
         return ret;
 }
 
-int sparc64_mmap_check(unsigned long addr, unsigned long len,
-                unsigned long flags)
+int sparc64_mmap_check(unsigned long addr, unsigned long len)
 {
         if (test_thread_flag(TIF_32BIT)) {
                 if (len >= STACK_TOP32)
@@ -609,46 +608,19 @@ asmlinkage unsigned long sys64_mremap(unsigned long addr,
         unsigned long old_len, unsigned long new_len,
         unsigned long flags, unsigned long new_addr)
 {
-        struct vm_area_struct *vma;
         unsigned long ret = -EINVAL;
 
         if (test_thread_flag(TIF_32BIT))
                 goto out;
         if (unlikely(new_len >= VA_EXCLUDE_START))
                 goto out;
-        if (unlikely(invalid_64bit_range(addr, old_len)))
+        if (unlikely(sparc64_mmap_check(addr, old_len)))
+                goto out;
+        if (unlikely(sparc64_mmap_check(new_addr, new_len)))
                 goto out;
 
         down_write(&current->mm->mmap_sem);
-        if (flags & MREMAP_FIXED) {
-                if (invalid_64bit_range(new_addr, new_len))
-                        goto out_sem;
-        } else if (invalid_64bit_range(addr, new_len)) {
-                unsigned long map_flags = 0;
-                struct file *file = NULL;
-
-                ret = -ENOMEM;
-                if (!(flags & MREMAP_MAYMOVE))
-                        goto out_sem;
-
-                vma = find_vma(current->mm, addr);
-                if (vma) {
-                        if (vma->vm_flags & VM_SHARED)
-                                map_flags |= MAP_SHARED;
-                        file = vma->vm_file;
-                }
-
-                /* MREMAP_FIXED checked above. */
-                new_addr = get_unmapped_area(file, addr, new_len,
-                                    vma ? vma->vm_pgoff : 0,
-                                    map_flags);
-                ret = new_addr;
-                if (new_addr & ~PAGE_MASK)
-                        goto out_sem;
-                flags |= MREMAP_FIXED;
-        }
         ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-out_sem:
         up_write(&current->mm->mmap_sem);
 out:
         return ret;       
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 1aa4288125f2..ba5bd626b39e 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -867,44 +867,15 @@ asmlinkage unsigned long sys32_mremap(unsigned long addr,
         unsigned long old_len, unsigned long new_len,
         unsigned long flags, u32 __new_addr)
 {
-        struct vm_area_struct *vma;
         unsigned long ret = -EINVAL;
         unsigned long new_addr = __new_addr;
 
-        if (old_len > STACK_TOP32 || new_len > STACK_TOP32)
+        if (unlikely(sparc64_mmap_check(addr, old_len)))
                 goto out;
-        if (addr > STACK_TOP32 - old_len)
+        if (unlikely(sparc64_mmap_check(new_addr, new_len)))
                 goto out;
         down_write(&current->mm->mmap_sem);
-        if (flags & MREMAP_FIXED) {
-                if (new_addr > STACK_TOP32 - new_len)
-                        goto out_sem;
-        } else if (addr > STACK_TOP32 - new_len) {
-                unsigned long map_flags = 0;
-                struct file *file = NULL;
-
-                ret = -ENOMEM;
-                if (!(flags & MREMAP_MAYMOVE))
-                        goto out_sem;
-
-                vma = find_vma(current->mm, addr);
-                if (vma) {
-                        if (vma->vm_flags & VM_SHARED)
-                                map_flags |= MAP_SHARED;
-                        file = vma->vm_file;
-                }
-
-                /* MREMAP_FIXED checked above. */
-                new_addr = get_unmapped_area(file, addr, new_len,
-                                    vma ? vma->vm_pgoff : 0,
-                                    map_flags);
-                ret = new_addr;
-                if (new_addr & ~PAGE_MASK)
-                        goto out_sem;
-                flags |= MREMAP_FIXED;
-        }
         ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-out_sem:
         up_write(&current->mm->mmap_sem);
 out:
         return ret;       
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 56ff55211341..704a3afcfd06 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -1,4 +1,4 @@
-/* $Id: trampoline.S,v 1.26 2002/02/09 19:49:30 davem Exp $
+/*
  * trampoline.S: Jump start slave processors on sparc64.
  *
  * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index d9b8d46707d1..369749262653 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -2116,7 +2116,7 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
         printk("\n");
 #endif
         do {
-                struct reg_window *rw;
+                struct sparc_stackf *sf;
                 struct pt_regs *regs;
                 unsigned long pc;
 
@@ -2124,15 +2124,17 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
                 if (fp < (thread_base + sizeof(struct thread_info)) ||
                     fp >= (thread_base + THREAD_SIZE))
                         break;
-                rw = (struct reg_window *)fp;
-                regs = (struct pt_regs *) (rw + 1);
+                sf = (struct sparc_stackf *) fp;
+                regs = (struct pt_regs *) (sf + 1);
 
                 if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+                        if (!(regs->tstate & TSTATE_PRIV))
+                                break;
                         pc = regs->tpc;
                         fp = regs->u_regs[UREG_I6] + STACK_BIAS;
                 } else {
-                        pc = rw->ins[7];
-                        fp = rw->ins[6] + STACK_BIAS;
+                        pc = sf->callers_pc;
+                        fp = (unsigned long)sf->fp + STACK_BIAS;
                 }
 
                 printk(" [%016lx] ", pc);
diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c
index 1a511e9f0d3e..afa7fc4f5193 100644
--- a/arch/sparc64/kernel/unaligned.c
+++ b/arch/sparc64/kernel/unaligned.c
@@ -1,4 +1,4 @@
-/* $Id: unaligned.c,v 1.24 2002/02/09 19:49:31 davem Exp $
+/*
  * unaligned.c: Unaligned load/store trap handling with special
  *              cases for the kernel to do them more quickly.
  *
diff --git a/arch/sparc64/lib/PeeCeeI.c b/arch/sparc64/lib/PeeCeeI.c
index 3c6cfbb20360..8b313f11bc8d 100644
--- a/arch/sparc64/lib/PeeCeeI.c
+++ b/arch/sparc64/lib/PeeCeeI.c
@@ -1,4 +1,4 @@
-/* $Id: PeeCeeI.c,v 1.4 1999/09/06 01:17:35 davem Exp $
+/*
  * PeeCeeI.c: The emerging standard...
  *
  * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/lib/VISsave.S b/arch/sparc64/lib/VISsave.S
index a0ded5c5aa5c..b320ae9e2e2e 100644
--- a/arch/sparc64/lib/VISsave.S
+++ b/arch/sparc64/lib/VISsave.S
@@ -1,4 +1,4 @@
-/* $Id: VISsave.S,v 1.6 2002/02/09 19:49:30 davem Exp $
+/*
  * VISsave.S: Code for saving FPU register state for
  *            VIS routines. One should not call this directly,
  *            but use macros provided in <asm/visasm.h>.
diff --git a/arch/sparc64/lib/memcmp.S b/arch/sparc64/lib/memcmp.S
index c90ad96c51b9..d3fdaa898566 100644
--- a/arch/sparc64/lib/memcmp.S
+++ b/arch/sparc64/lib/memcmp.S
@@ -1,4 +1,4 @@
-/* $Id: memcmp.S,v 1.3 2000/03/23 07:51:08 davem Exp $
+/*
  * Sparc64 optimized memcmp code.
  *
  * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
diff --git a/arch/sparc64/lib/memscan.S b/arch/sparc64/lib/memscan.S
index 5e72d4911417..5686dfa5dc15 100644
--- a/arch/sparc64/lib/memscan.S
+++ b/arch/sparc64/lib/memscan.S
@@ -1,4 +1,4 @@
-/* $Id: memscan.S,v 1.3 2000/01/31 04:59:10 davem Exp $
+/*
  * memscan.S: Optimized memscan for Sparc64.
  *
  * Copyright (C) 1997,1998 Jakub Jelinek (jj@ultra.linux.cz)
diff --git a/arch/sparc64/lib/strncmp.S b/arch/sparc64/lib/strncmp.S
index 6f14f53dbabe..980e83751556 100644
--- a/arch/sparc64/lib/strncmp.S
+++ b/arch/sparc64/lib/strncmp.S
@@ -1,4 +1,4 @@
-/* $Id: strncmp.S,v 1.2 1997/03/11 17:51:44 jj Exp $
+/*
  * Sparc64 optimized strncmp code.
  *
  * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
diff --git a/arch/sparc64/lib/strncpy_from_user.S b/arch/sparc64/lib/strncpy_from_user.S
index b2f499f79427..511c8f136f95 100644
--- a/arch/sparc64/lib/strncpy_from_user.S
+++ b/arch/sparc64/lib/strncpy_from_user.S
@@ -1,4 +1,4 @@
-/* $Id: strncpy_from_user.S,v 1.6 1999/05/25 16:53:05 jj Exp $
+/*
  * strncpy_from_user.S: Sparc64 strncpy from userspace.
  *
  *  Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
diff --git a/arch/sparc64/math-emu/math.c b/arch/sparc64/math-emu/math.c
index 6ee496c2864a..add053e0f3b3 100644
--- a/arch/sparc64/math-emu/math.c
+++ b/arch/sparc64/math-emu/math.c
@@ -1,4 +1,4 @@
-/* $Id: math.c,v 1.11 1999/12/20 05:02:25 davem Exp $
+/*
  * arch/sparc64/math-emu/math.c
  *
  * Copyright (C) 1997,1999 Jakub Jelinek (jj@ultra.linux.cz)
diff --git a/arch/sparc64/math-emu/sfp-util.h b/arch/sparc64/math-emu/sfp-util.h
index 31e474738cf6..425d3cf01af4 100644
--- a/arch/sparc64/math-emu/sfp-util.h
+++ b/arch/sparc64/math-emu/sfp-util.h
@@ -1,4 +1,4 @@
-/* $Id: sfp-util.h,v 1.5 2001/06/10 06:48:46 davem Exp $
+/*
  * arch/sparc64/math-emu/sfp-util.h
  *
  * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
diff --git a/arch/sparc64/mm/Makefile b/arch/sparc64/mm/Makefile
index e415bf942bcd..68d04c0370f4 100644
--- a/arch/sparc64/mm/Makefile
+++ b/arch/sparc64/mm/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.8 2000/12/14 22:57:25 davem Exp $
 # Makefile for the linux Sparc64-specific parts of the memory manager.
 #
 
diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c
index 2650d0d33ac2..236f4d228d2b 100644
--- a/arch/sparc64/mm/fault.c
+++ b/arch/sparc64/mm/fault.c
@@ -1,4 +1,4 @@
-/* $Id: fault.c,v 1.59 2002/02/09 19:49:31 davem Exp $
+/*
  * arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc.
  *
  * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c
index af9d81db0b38..f362c2037013 100644
--- a/arch/sparc64/mm/generic.c
+++ b/arch/sparc64/mm/generic.c
@@ -1,4 +1,4 @@
-/* $Id: generic.c,v 1.18 2001/12/21 04:56:15 davem Exp $
+/*
  * generic.c: Generic Sparc mm routines that are not dependent upon
  *            MMU type but are Sparc specific.
  *
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index ec3e2c72302a..84898c44dd4d 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -1,4 +1,4 @@
-/*  $Id: init.c,v 1.209 2002/02/09 19:49:31 davem Exp $
+/*
  *  arch/sparc64/mm/init.c
  *
  *  Copyright (C) 1996-1999 David S. Miller (davem@caip.rutgers.edu)
@@ -610,8 +610,6 @@ static void __init remap_kernel(void)
 
 static void __init inherit_prom_mappings(void)
 {
-        read_obp_translations();
-
         /* Now fixup OBP's idea about where we really are mapped. */
         printk("Remapping the kernel... ");
         remap_kernel();
@@ -770,7 +768,7 @@ static void __init find_ramdisk(unsigned long phys_base)
                 initrd_start = ramdisk_image;
                 initrd_end = ramdisk_image + sparc_ramdisk_size;
 
-                lmb_reserve(initrd_start, initrd_end);
+                lmb_reserve(initrd_start, sparc_ramdisk_size);
 
                 initrd_start += PAGE_OFFSET;
                 initrd_end += PAGE_OFFSET;
@@ -1747,7 +1745,17 @@ void __init paging_init(void)
 
         lmb_init();
 
-        /* Find available physical memory... */
+        /* Find available physical memory...
+         *
+         * Read it twice in order to work around a bug in openfirmware.
+         * The call to grab this table itself can cause openfirmware to
+         * allocate memory, which in turn can take away some space from
+         * the list of available memory.  Reading it twice makes sure
+         * we really do get the final value.
+         */
+        read_obp_translations();
+        read_obp_memory("reg", &pall[0], &pall_ents);
+        read_obp_memory("available", &pavail[0], &pavail_ents);
         read_obp_memory("available", &pavail[0], &pavail_ents);
 
         phys_base = 0xffffffffffffffffUL;
@@ -1788,8 +1796,6 @@ void __init paging_init(void)
         
         inherit_prom_mappings();
         
-        read_obp_memory("reg", &pall[0], &pall_ents);
-
         init_kpte_bitmap();
 
         /* Ok, we can use our TLB miss and window trap handlers safely.  */
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 796e005dad8b..9bb2d90a9df6 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -1,7 +1,7 @@
-/* $Id: ultra.S,v 1.72 2002/02/09 19:49:31 davem Exp $
+/*
  * ultra.S: Don't expand these all over the place...
  *
- * Copyright (C) 1997, 2000 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1997, 2000, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <asm/asi.h>
@@ -15,6 +15,7 @@
 #include <asm/thread_info.h>
 #include <asm/cacheflush.h>
 #include <asm/hypervisor.h>
+#include <asm/cpudata.h>
 
         /* Basically, most of the Spitfire vs. Cheetah madness
          * has to do with the fact that Cheetah does not support
@@ -514,6 +515,32 @@ xcall_report_regs:
         b               rtrap_xcall
          ldx            [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
 
+#ifdef CONFIG_MAGIC_SYSRQ
+        .globl          xcall_fetch_glob_regs
+xcall_fetch_glob_regs:
+        sethi           %hi(global_reg_snapshot), %g1
+        or              %g1, %lo(global_reg_snapshot), %g1
+        __GET_CPUID(%g2)
+        sllx            %g2, 6, %g3
+        add             %g1, %g3, %g1
+        rdpr            %tstate, %g7
+        stx             %g7, [%g1 + GR_SNAP_TSTATE]
+        rdpr            %tpc, %g7
+        stx             %g7, [%g1 + GR_SNAP_TPC]
+        rdpr            %tnpc, %g7
+        stx             %g7, [%g1 + GR_SNAP_TNPC]
+        stx             %o7, [%g1 + GR_SNAP_O7]
+        stx             %i7, [%g1 + GR_SNAP_I7]
+        sethi           %hi(trap_block), %g7
+        or              %g7, %lo(trap_block), %g7
+        sllx            %g2, TRAP_BLOCK_SZ_SHIFT, %g2
+        add             %g7, %g2, %g7
+        ldx             [%g7 + TRAP_PER_CPU_THREAD], %g3
+        membar          #StoreStore
+        stx             %g3, [%g1 + GR_SNAP_THREAD]
+        retry
+#endif /* CONFIG_MAGIC_SYSRQ */
+
 #ifdef DCACHE_ALIASING_POSSIBLE
         .align          32
         .globl          xcall_flush_dcache_page_cheetah
diff --git a/arch/sparc64/prom/Makefile b/arch/sparc64/prom/Makefile
index 3d33ed27bc27..8c94483ca54d 100644
--- a/arch/sparc64/prom/Makefile
+++ b/arch/sparc64/prom/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.7 2000/12/14 22:57:25 davem Exp $
 # Makefile for the Sun Boot PROM interface library under
 # Linux.
 #
diff --git a/arch/sparc64/prom/bootstr.c b/arch/sparc64/prom/bootstr.c
index a7278614e99d..ab9ccc63b388 100644
--- a/arch/sparc64/prom/bootstr.c
+++ b/arch/sparc64/prom/bootstr.c
@@ -1,4 +1,4 @@
-/* $Id: bootstr.c,v 1.6 1999/08/31 06:55:01 davem Exp $
+/*
  * bootstr.c:  Boot string/argument acquisition from the PROM.
  *
  * Copyright(C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/prom/devops.c b/arch/sparc64/prom/devops.c
index 4641839eb39a..9dbd803e46e1 100644
--- a/arch/sparc64/prom/devops.c
+++ b/arch/sparc64/prom/devops.c
@@ -1,4 +1,4 @@
-/* $Id: devops.c,v 1.3 1997/10/29 07:43:28 ecd Exp $
+/*
  * devops.c:  Device operations using the PROM.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/prom/init.c b/arch/sparc64/prom/init.c
index 87e7c7ea0ee6..7b00f89490a4 100644
--- a/arch/sparc64/prom/init.c
+++ b/arch/sparc64/prom/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.10 1999/09/21 14:35:59 davem Exp $
+/*
  * init.c:  Initialize internal variables used by the PROM
  *          library functions.
  *
diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c
index 47a877a15abd..9b0c0760901e 100644
--- a/arch/sparc64/prom/misc.c
+++ b/arch/sparc64/prom/misc.c
@@ -1,4 +1,4 @@
-/* $Id: misc.c,v 1.20 2001/09/21 03:17:07 kanoj Exp $
+/*
  * misc.c:  Miscellaneous prom functions that don't belong
  *          anywhere else.
  *
diff --git a/arch/sparc64/prom/p1275.c b/arch/sparc64/prom/p1275.c
index 7fcccc0e19cf..4b7c937bba61 100644
--- a/arch/sparc64/prom/p1275.c
+++ b/arch/sparc64/prom/p1275.c
@@ -1,4 +1,4 @@
-/* $Id: p1275.c,v 1.22 2001/10/18 09:40:00 davem Exp $
+/*
  * p1275.c: Sun IEEE 1275 PROM low level interface routines
  *
  * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
diff --git a/arch/sparc64/prom/tree.c b/arch/sparc64/prom/tree.c
index a99ccd7fb1b0..281aea44790b 100644
--- a/arch/sparc64/prom/tree.c
+++ b/arch/sparc64/prom/tree.c
@@ -1,4 +1,4 @@
-/* $Id: tree.c,v 1.10 1998/01/10 22:39:00 ecd Exp $
+/*
  * tree.c: Basic device tree traversal/scanning for the Linux
  *         prom library.
  *
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index dba8e05f0287..6976812cfb18 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -259,6 +259,8 @@ if BROKEN
         source "drivers/mtd/Kconfig"
 endif
 
+source "drivers/leds/Kconfig"
+
 #This is just to shut up some Kconfig warnings, so no prompt.
 config INPUT
         bool
diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char
index 3a4b396d7979..1b238ebae6b3 100644
--- a/arch/um/Kconfig.char
+++ b/arch/um/Kconfig.char
@@ -145,14 +145,14 @@ config LEGACY_PTYS
           systems, it is safe to say N.
 
 config RAW_DRIVER
-        tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+        tristate "RAW driver (/dev/raw/rawN)"
+        depends on BLOCK
         help
           The raw driver permits block devices to be bound to /dev/raw/rawN.
           Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
           See the raw(8) manpage for more details.
 
-          The raw driver is deprecated and will be removed soon.
-          Applications should simply open the device (eg /dev/hda1)
+          Applications should preferably open the device (eg /dev/hda1)
           with the O_DIRECT flag.
 
 config MAX_RAW_DEVS
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index 025764089ac8..cfeb3f4a44af 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -11,6 +11,7 @@
 #include <termios.h>
 #include <sys/ioctl.h>
 #include "chan_user.h"
+#include "kern_constants.h"
 #include "os.h"
 #include "um_malloc.h"
 #include "user.h"
diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h
index ca8c9e11a39b..f5701fd2ef90 100644
--- a/arch/um/drivers/cow_sys.h
+++ b/arch/um/drivers/cow_sys.h
@@ -8,7 +8,7 @@
 
 static inline void *cow_malloc(int size)
 {
-        return kmalloc(size, UM_GFP_KERNEL);
+        return uml_kmalloc(size, UM_GFP_KERNEL);
 }
 
 static inline void cow_free(void *ptr)
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index f23c109a055c..f8e85e0bdace 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -34,7 +34,7 @@ static struct sockaddr_un *new_addr(void *name, int len)
 {
         struct sockaddr_un *sun;
 
-        sun = kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
+        sun = uml_kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
         if (sun == NULL) {
                 printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un "
                        "failed\n");
@@ -83,7 +83,7 @@ static int connect_to_switch(struct daemon_data *pri)
                 goto out_close;
         }
 
-        sun = kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
+        sun = uml_kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
         if (sun == NULL) {
                 printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un "
                        "failed\n");
diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c
index 0a2bb5b64b82..f5a981a16240 100644
--- a/arch/um/drivers/fd.c
+++ b/arch/um/drivers/fd.c
@@ -40,7 +40,7 @@ static void *fd_init(char *str, int device, const struct chan_opts *opts)
                 return NULL;
         }
 
-        data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+        data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
         if (data == NULL)
                 return NULL;
 
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index ff1b22b69e9c..368219cc2366 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -154,7 +154,7 @@ static int hostaudio_ioctl(struct inode *inode, struct file *file,
         case SNDCTL_DSP_SUBDIVIDE:
         case SNDCTL_DSP_SETFRAGMENT:
                 if (get_user(data, (int __user *) arg))
-                        return EFAULT;
+                        return -EFAULT;
                 break;
         default:
                 break;
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index 5f647d7a7292..ee19e91568a2 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -15,6 +15,7 @@
 #include <unistd.h>
 #include <errno.h>
 #include <netinet/in.h>
+#include "kern_constants.h"
 #include "mcast.h"
 #include "net_user.h"
 #include "um_malloc.h"
@@ -24,7 +25,7 @@ static struct sockaddr_in *new_addr(char *addr, unsigned short port)
 {
         struct sockaddr_in *sin;
 
-        sin = kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL);
+        sin = uml_kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL);
         if (sin == NULL) {
                 printk(UM_KERN_ERR "new_addr: allocation of sockaddr_in "
                        "failed\n");
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index abf2653f5517..9415dd9e63ef 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -222,7 +222,7 @@ static void change(char *dev, char *what, unsigned char *addr,
                 netmask[2], netmask[3]);
 
         output_len = UM_KERN_PAGE_SIZE;
-        output = kmalloc(output_len, UM_GFP_KERNEL);
+        output = uml_kmalloc(output_len, UM_GFP_KERNEL);
         if (output == NULL)
                 printk(UM_KERN_ERR "change : failed to allocate output "
                        "buffer\n");
diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c
index e9809356c530..5f903587d69e 100644
--- a/arch/um/drivers/pcap_user.c
+++ b/arch/um/drivers/pcap_user.c
@@ -50,7 +50,7 @@ static int pcap_open(void *data)
                         return -EIO;
                 }
 
-                pri->compiled = kmalloc(sizeof(struct bpf_program),
+                pri->compiled = uml_kmalloc(sizeof(struct bpf_program),
                                         UM_GFP_KERNEL);
                 if (pri->compiled == NULL) {
                         printk(UM_KERN_ERR "pcap_open : kmalloc failed\n");
diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c
index d269ca387f10..b49bf56a56aa 100644
--- a/arch/um/drivers/port_user.c
+++ b/arch/um/drivers/port_user.c
@@ -47,7 +47,7 @@ static void *port_init(char *str, int device, const struct chan_opts *opts)
         if (kern_data == NULL)
                 return NULL;
 
-        data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+        data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
         if (data == NULL)
                 goto err;
 
diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c
index 49c79dda6046..1113911dcb2b 100644
--- a/arch/um/drivers/pty.c
+++ b/arch/um/drivers/pty.c
@@ -29,7 +29,7 @@ static void *pty_chan_init(char *str, int device, const struct chan_opts *opts)
 {
         struct pty_chan *data;
 
-        data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+        data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
         if (data == NULL)
                 return NULL;
 
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index 71f0959c1535..4949044773ba 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -1,4 +1,5 @@
-/* Copyright (C) 2005 Jeff Dike <jdike@addtoit.com> */
+/* Copyright (C) 2005 - 2008 Jeff Dike <jdike@{linux.intel,addtoit}.com> */
+
 /* Much of this ripped from drivers/char/hw_random.c, see there for other
  * copyright.
  *
@@ -8,16 +9,18 @@
 #include <linux/sched.h>
 #include <linux/module.h>
 #include <linux/fs.h>
+#include <linux/interrupt.h>
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
 #include <asm/uaccess.h>
+#include "irq_kern.h"
 #include "os.h"
 
 /*
  * core module and version information
  */
 #define RNG_VERSION "1.0.0"
-#define RNG_MODULE_NAME "random"
+#define RNG_MODULE_NAME "hw_random"
 
 #define RNG_MISCDEV_MINOR               183 /* official */
 
@@ -26,47 +29,67 @@
  * protects against a module being loaded twice at the same time.
  */
 static int random_fd = -1;
+static DECLARE_WAIT_QUEUE_HEAD(host_read_wait);
 
 static int rng_dev_open (struct inode *inode, struct file *filp)
 {
         /* enforce read-only access to this chrdev */
         if ((filp->f_mode & FMODE_READ) == 0)
                 return -EINVAL;
-        if (filp->f_mode & FMODE_WRITE)
+        if ((filp->f_mode & FMODE_WRITE) != 0)
                 return -EINVAL;
 
         return 0;
 }
 
+static atomic_t host_sleep_count = ATOMIC_INIT(0);
+
 static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size,
-                             loff_t * offp)
+                             loff_t *offp)
 {
-        u32 data;
-        int n, ret = 0, have_data;
-
-        while(size){
-                n = os_read_file(random_fd, &data, sizeof(data));
-                if(n > 0){
-                        have_data = n;
-                        while (have_data && size) {
-                                if (put_user((u8)data, buf++)) {
-                                        ret = ret ? : -EFAULT;
-                                        break;
-                                }
-                                size--;
-                                ret++;
-                                have_data--;
-                                data>>=8;
-                        }
-                }
-                else if(n == -EAGAIN){
-                        if (filp->f_flags & O_NONBLOCK)
-                                return ret ? : -EAGAIN;
-
-                        if(need_resched())
-                                schedule_timeout_interruptible(1);
-                }
-                else return n;
+        u32 data;
+        int n, ret = 0, have_data;
+
+        while (size) {
+                n = os_read_file(random_fd, &data, sizeof(data));
+                if (n > 0) {
+                        have_data = n;
+                        while (have_data && size) {
+                                if (put_user((u8) data, buf++)) {
+                                        ret = ret ? : -EFAULT;
+                                        break;
+                                }
+                                size--;
+                                ret++;
+                                have_data--;
+                                data >>= 8;
+                        }
+                }
+                else if (n == -EAGAIN) {
+                        DECLARE_WAITQUEUE(wait, current);
+
+                        if (filp->f_flags & O_NONBLOCK)
+                                return ret ? : -EAGAIN;
+
+                        atomic_inc(&host_sleep_count);
+                        reactivate_fd(random_fd, RANDOM_IRQ);
+                        add_sigio_fd(random_fd);
+
+                        add_wait_queue(&host_read_wait, &wait);
+                        set_task_state(current, TASK_INTERRUPTIBLE);
+
+                        schedule();
+                        set_task_state(current, TASK_RUNNING);
+                        remove_wait_queue(&host_read_wait, &wait);
+
+                        if (atomic_dec_and_test(&host_sleep_count)) {
+                                ignore_sigio_fd(random_fd);
+                                deactivate_fd(random_fd, RANDOM_IRQ);
+                        }
+                }
+                else
+                        return n;
+
                 if (signal_pending (current))
                         return ret ? : -ERESTARTSYS;
         }
@@ -86,6 +109,13 @@ static struct miscdevice rng_miscdev = {
         &rng_chrdev_ops,
 };
 
+static irqreturn_t random_interrupt(int irq, void *data)
+{
+        wake_up(&host_read_wait);
+
+        return IRQ_HANDLED;
+}
+
 /*
  * rng_init - initialize RNG module
  */
@@ -93,28 +123,33 @@ static int __init rng_init (void)
 {
         int err;
 
-        err = os_open_file("/dev/random", of_read(OPENFLAGS()), 0);
-        if(err < 0)
-                goto out;
+        err = os_open_file("/dev/random", of_read(OPENFLAGS()), 0);
+        if (err < 0)
+                goto out;
 
-        random_fd = err;
+        random_fd = err;
 
-        err = os_set_fd_block(random_fd, 0);
-        if(err)
+        err = um_request_irq(RANDOM_IRQ, random_fd, IRQ_READ, random_interrupt,
+                             IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "random",
+                             NULL);
+        if (err)
                 goto err_out_cleanup_hw;
 
+        sigio_broken(random_fd, 1);
+
         err = misc_register (&rng_miscdev);
         if (err) {
-                printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n");
+                printk (KERN_ERR RNG_MODULE_NAME ": misc device register "
+                        "failed\n");
                 goto err_out_cleanup_hw;
         }
+out:
+        return err;
 
- out:
-        return err;
-
- err_out_cleanup_hw:
-        random_fd = -1;
-        goto out;
+err_out_cleanup_hw:
+        os_close_file(random_fd);
+        random_fd = -1;
+        goto out;
 }
 
 /*
@@ -122,6 +157,7 @@ static int __init rng_init (void)
  */
 static void __exit rng_cleanup (void)
 {
+        os_close_file(random_fd);
         misc_deregister (&rng_miscdev);
 }
 
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index 8b80505a3fb0..a1c2d2c98a94 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -96,7 +96,7 @@ static int slip_tramp(char **argv, int fd)
         pid = err;
 
         output_len = UM_KERN_PAGE_SIZE;
-        output = kmalloc(output_len, UM_GFP_KERNEL);
+        output = uml_kmalloc(output_len, UM_GFP_KERNEL);
         if (output == NULL) {
                 printk(UM_KERN_ERR "slip_tramp : failed to allocate output "
                        "buffer\n");
diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c
index c930fedc5172..495858a090e4 100644
--- a/arch/um/drivers/tty.c
+++ b/arch/um/drivers/tty.c
@@ -29,7 +29,7 @@ static void *tty_chan_init(char *str, int device, const struct chan_opts *opts)
         }
         str++;
 
-        data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+        data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
         if (data == NULL)
                 return NULL;
         *data = ((struct tty_chan) { .dev       = str,
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 5e45e39a8a8d..b58fb8941d8d 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -49,7 +49,6 @@
 #include "irq_user.h"
 #include "irq_kern.h"
 #include "ubd_user.h"
-#include "kern_util.h"
 #include "os.h"
 #include "mem.h"
 #include "mem_kern.h"
@@ -1178,8 +1177,8 @@ static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask,
          * by one word.  Thanks to Lynn Kerby for the fix and James McMechan
          * for the original diagnosis.
          */
-        if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) /
-                           sizeof(unsigned long) - 1))
+        if (*cow_offset == (DIV_ROUND_UP(bitmap_len,
+                                         sizeof(unsigned long)) - 1))
                 (*cow_offset)--;
 
         bitmap_words[0] = bitmap[*cow_offset];
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 8a1c18a9b240..da2caa5a21ef 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -30,7 +30,7 @@ static void *xterm_init(char *str, int device, const struct chan_opts *opts)
 {
         struct xterm_chan *data;
 
-        data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+        data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
         if (data == NULL)
                 return NULL;
         *data = ((struct xterm_chan) { .pid             = -1,
diff --git a/arch/um/include/as-layout.h b/arch/um/include/as-layout.h
index cac542d8ff70..58e852dfb0ce 100644
--- a/arch/um/include/as-layout.h
+++ b/arch/um/include/as-layout.h
@@ -23,16 +23,16 @@
  */
 
 #ifdef __ASSEMBLY__
-#define _AC(X, Y)       (Y)
+#define _UML_AC(X, Y)   (Y)
 #else
-#define __AC(X, Y)      (X (Y))
-#define _AC(X, Y)       __AC(X, Y)
+#define __UML_AC(X, Y)  (X(Y))
+#define _UML_AC(X, Y)   __UML_AC(X, Y)
 #endif
 
-#define STUB_START _AC(, 0x100000)
-#define STUB_CODE _AC((unsigned long), STUB_START)
-#define STUB_DATA _AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
-#define STUB_END _AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
+#define STUB_START _UML_AC(, 0x100000)
+#define STUB_CODE _UML_AC((unsigned long), STUB_START)
+#define STUB_DATA _UML_AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
+#define STUB_END _UML_AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/um/include/line.h b/arch/um/include/line.h
index 979b73e6352d..311a0d3d93af 100644
--- a/arch/um/include/line.h
+++ b/arch/um/include/line.h
@@ -58,11 +58,11 @@ struct line {
 };
 
 #define LINE_INIT(str, d) \
-        { .count_lock = SPIN_LOCK_UNLOCKED, \
+        { .count_lock = __SPIN_LOCK_UNLOCKED((str).count_lock), \
           .init_str =   str,    \
           .init_pri =   INIT_STATIC, \
           .valid =      1, \
-          .lock =       SPIN_LOCK_UNLOCKED, \
+          .lock =       __SPIN_LOCK_UNLOCKED((str).lock), \
           .driver =     d }
 
 extern void line_close(struct tty_struct *tty, struct file * filp);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 32c799e3a495..db5be46e3e18 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -290,6 +290,7 @@ extern void os_set_ioignore(void);
 extern int add_sigio_fd(int fd);
 extern int ignore_sigio_fd(int fd);
 extern void maybe_sigio_broken(int fd, int read);
+extern void sigio_broken(int fd, int read);
 
 /* sys-x86_64/prctl.c */
 extern int os_arch_prctl(int pid, int code, unsigned long *addr);
@@ -298,6 +299,6 @@ extern int os_arch_prctl(int pid, int code, unsigned long *addr);
 extern int get_pty(void);
 
 /* sys-$ARCH/task_size.c */
-extern unsigned long os_get_task_size(void);
+extern unsigned long os_get_top_address(void);
 
 #endif
diff --git a/arch/um/include/process.h b/arch/um/include/process.h
index 5af9157ff54f..bb873a51262e 100644
--- a/arch/um/include/process.h
+++ b/arch/um/include/process.h
@@ -1,5 +1,5 @@
 /* 
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
 
@@ -8,18 +8,10 @@
 
 #include <signal.h>
 
-extern void sig_handler(int sig, struct sigcontext sc);
-extern void alarm_handler(int sig, struct sigcontext sc);
+/* Copied from linux/compiler-gcc.h since we can't include it directly */
+#define barrier() __asm__ __volatile__("": : :"memory")
 
-#endif
+extern void sig_handler(int sig, struct sigcontext *sc);
+extern void alarm_handler(int sig, struct sigcontext *sc);
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#endif
diff --git a/arch/um/include/skas_ptrace.h b/arch/um/include/skas_ptrace.h
index cd2327d09c8d..3d31bbacd016 100644
--- a/arch/um/include/skas_ptrace.h
+++ b/arch/um/include/skas_ptrace.h
@@ -1,5 +1,5 @@
 /* 
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
 
@@ -12,14 +12,3 @@
 #include "sysdep/skas_ptrace.h"
 
 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysdep-i386/ptrace_user.h b/arch/um/include/sysdep-i386/ptrace_user.h
index 75650723c38f..ef56247e4143 100644
--- a/arch/um/include/sysdep-i386/ptrace_user.h
+++ b/arch/um/include/sysdep-i386/ptrace_user.h
@@ -41,38 +41,10 @@
 #define PT_SP_OFFSET PT_OFFSET(UESP)
 #define PT_SP(regs) ((regs)[UESP])
 
-#define FP_SIZE ((HOST_XFP_SIZE > HOST_FP_SIZE) ? HOST_XFP_SIZE : HOST_FP_SIZE)
+#define FP_SIZE ((HOST_FPX_SIZE > HOST_FP_SIZE) ? HOST_FPX_SIZE : HOST_FP_SIZE)
 
 #ifndef FRAME_SIZE
 #define FRAME_SIZE (17)
 #endif
-#define FRAME_SIZE_OFFSET (FRAME_SIZE * sizeof(unsigned long))
-
-#define FP_FRAME_SIZE (27)
-#define FPX_FRAME_SIZE (128)
-
-#ifdef PTRACE_GETREGS
-#define UM_HAVE_GETREGS
-#endif
-
-#ifdef PTRACE_SETREGS
-#define UM_HAVE_SETREGS
-#endif
-
-#ifdef PTRACE_GETFPREGS
-#define UM_HAVE_GETFPREGS
-#endif
-
-#ifdef PTRACE_SETFPREGS
-#define UM_HAVE_SETFPREGS
-#endif
-
-#ifdef PTRACE_GETFPXREGS
-#define UM_HAVE_GETFPXREGS
-#endif
-
-#ifdef PTRACE_SETFPXREGS
-#define UM_HAVE_SETFPXREGS
-#endif
 
 #endif
diff --git a/arch/um/include/sysdep-i386/sigcontext.h b/arch/um/include/sysdep-i386/sigcontext.h
index 67e77122aa45..f583c87111a0 100644
--- a/arch/um/include/sysdep-i386/sigcontext.h
+++ b/arch/um/include/sysdep-i386/sigcontext.h
@@ -10,7 +10,7 @@
 
 #define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
 
-#define GET_FAULTINFO_FROM_SC(fi,sc) \
+#define GET_FAULTINFO_FROM_SC(fi, sc) \
         { \
                 (fi).cr2 = SC_CR2(sc); \
                 (fi).error_code = SC_ERR(sc); \
diff --git a/arch/um/include/sysdep-x86_64/ptrace_user.h b/arch/um/include/sysdep-x86_64/ptrace_user.h
index 45c0bd881cb3..4dbccdb58f48 100644
--- a/arch/um/include/sysdep-x86_64/ptrace_user.h
+++ b/arch/um/include/sysdep-x86_64/ptrace_user.h
@@ -48,7 +48,8 @@
 #define PT_ORIG_RAX_OFFSET (ORIG_RAX)
 #define PT_ORIG_RAX(regs) ((regs)[PT_INDEX(ORIG_RAX)])
 
-/* x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
+/*
+ * x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
  * it's defined in the kernel's include/linux/ptrace.h. Additionally, use the
  * 2.4 name and value for 2.4 host compatibility.
  */
@@ -56,7 +57,8 @@
 #define PTRACE_OLDSETOPTIONS 21
 #endif
 
-/* These are before the system call, so the system call number is RAX
+/*
+ * These are before the system call, so the system call number is RAX
  * rather than ORIG_RAX, and arg4 is R10 rather than RCX
  */
 #define REGS_SYSCALL_NR PT_INDEX(RAX)
@@ -73,14 +75,3 @@
 #define FP_SIZE (HOST_FP_SIZE)
 
 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/um_malloc.h b/arch/um/include/um_malloc.h
index 0ad17cb83d96..c554d706d106 100644
--- a/arch/um/include/um_malloc.h
+++ b/arch/um/include/um_malloc.h
@@ -8,15 +8,12 @@
 
 #include "kern_constants.h"
 
-extern void *__kmalloc(int size, int flags);
-static inline void *kmalloc(int size, int flags)
-{
-        return __kmalloc(size, flags);
-}
-
+extern void *uml_kmalloc(int size, int flags);
 extern void kfree(const void *ptr);
 
 extern void *vmalloc(unsigned long size);
 extern void vfree(void *ptr);
 
 #endif /* __UM_MALLOC_H__ */
+
+
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 26090b7f323e..9975e1ab44fb 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -1,4 +1,5 @@
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT(ELF_FORMAT)
 OUTPUT_ARCH(ELF_ARCH)
@@ -21,7 +22,7 @@ SECTIONS
         _einittext = .;
   }
 
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
 
   /* Read-only sections, merged into text segment: */
   .hash           : { *(.hash) }
@@ -68,9 +69,9 @@ SECTIONS
     /* .gnu.warning sections are handled specially by elf32.em.  */
     *(.gnu.warning)
 
-    . = ALIGN(4096);
+    . = ALIGN(PAGE_SIZE);
   } =0x90909090
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   .syscall_stub : {
         __syscall_stub_start = .;
         *(.__syscall_stub*)
diff --git a/arch/um/kernel/init_task.c b/arch/um/kernel/init_task.c
index dcfceca95052..910eda8fca18 100644
--- a/arch/um/kernel/init_task.c
+++ b/arch/um/kernel/init_task.c
@@ -12,7 +12,6 @@
 
 static struct fs_struct init_fs = INIT_FS;
 struct mm_struct init_mm = INIT_MM(init_mm);
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 EXPORT_SYMBOL(init_mm);
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index 66e2a305a8d6..ccc02a616c22 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -60,6 +60,11 @@ EXPORT_SYMBOL(os_rcv_fd);
 EXPORT_SYMBOL(run_helper);
 EXPORT_SYMBOL(start_thread);
 
+EXPORT_SYMBOL(add_sigio_fd);
+EXPORT_SYMBOL(ignore_sigio_fd);
+EXPORT_SYMBOL(deactivate_fd);
+EXPORT_SYMBOL(sigio_broken);
+
 #ifdef CONFIG_SMP
 
 /* required for SMP */
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 2eea1ff235e6..b0ee64622ff7 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -375,3 +375,8 @@ pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
         return pmd;
 }
 #endif
+
+void *uml_kmalloc(int size, int flags)
+{
+        return kmalloc(size, flags);
+}
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 0d0cea2ac98d..c3e2f369c33c 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -75,7 +75,7 @@ static irqreturn_t um_timer(int irq, void *dev)
 
 static cycle_t itimer_read(void)
 {
-        return os_nsecs();
+        return os_nsecs() / 1000;
 }
 
 static struct clocksource itimer_clocksource = {
@@ -83,7 +83,7 @@ static struct clocksource itimer_clocksource = {
         .rating         = 300,
         .read           = itimer_read,
         .mask           = CLOCKSOURCE_MASK(64),
-        .mult           = 1,
+        .mult           = 1000,
         .shift          = 0,
         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 56deed623446..8d84250324b3 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -150,7 +150,7 @@ __uml_setup("root=", uml_root_setup,
 static int __init no_skas_debug_setup(char *line, int *add)
 {
         printf("'debug' is not necessary to gdb UML in skas mode - run \n");
-        printf("'gdb linux'");
+        printf("'gdb linux'\n");
 
         return 0;
 }
@@ -258,6 +258,7 @@ int __init linux_main(int argc, char **argv)
 {
         unsigned long avail, diff;
         unsigned long virtmem_size, max_physmem;
+        unsigned long stack;
         unsigned int i;
         int add;
         char * mode;
@@ -273,7 +274,7 @@ int __init linux_main(int argc, char **argv)
         if (have_root == 0)
                 add_arg(DEFAULT_COMMAND_LINE);
 
-        host_task_size = os_get_task_size();
+        host_task_size = os_get_top_address();
         /*
          * TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps
          * out
@@ -348,7 +349,9 @@ int __init linux_main(int argc, char **argv)
         }
 
         virtmem_size = physmem_size;
-        avail = TASK_SIZE - start_vm;
+        stack = (unsigned long) argv;
+        stack &= ~(1024 * 1024 - 1);
+        avail = stack - start_vm;
         if (physmem_size > avail)
                 virtmem_size = avail;
         end_vm = start_vm + virtmem_size;
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 5828c1d54505..11b835248b86 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -1,4 +1,5 @@
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT(ELF_FORMAT)
 OUTPUT_ARCH(ELF_ARCH)
@@ -26,7 +27,7 @@ SECTIONS
         INIT_TEXT
         _einittext = .;
   }
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
 
   .text      :
   {
@@ -39,7 +40,7 @@ SECTIONS
     *(.gnu.linkonce.t*)
   }
 
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   .syscall_stub : {
         __syscall_stub_start = .;
         *(.__syscall_stub*)
@@ -79,7 +80,7 @@ SECTIONS
   .sdata     : { *(.sdata) }
   _edata  =  .;
   PROVIDE (edata = .);
-  . = ALIGN(0x1000);
+  . = ALIGN(PAGE_SIZE);
   .sbss      :
   {
    __bss_start = .;
diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c
index 6fb0b174f538..cc72cb2c1af6 100644
--- a/arch/um/os-Linux/drivers/ethertap_user.c
+++ b/arch/um/os-Linux/drivers/ethertap_user.c
@@ -52,7 +52,7 @@ static void etap_change(int op, unsigned char *addr, unsigned char *netmask,
                 return;
         }
 
-        output = kmalloc(UM_KERN_PAGE_SIZE, UM_GFP_KERNEL);
+        output = uml_kmalloc(UM_KERN_PAGE_SIZE, UM_GFP_KERNEL);
         if (output == NULL)
                 printk(UM_KERN_ERR "etap_change : Failed to allocate output "
                        "buffer\n");
@@ -165,7 +165,7 @@ static int etap_open(void *data)
         err = etap_tramp(pri->dev_name, pri->gate_addr, control_fds[0],
                          control_fds[1], data_fds[0], data_fds[1]);
         output_len = UM_KERN_PAGE_SIZE;
-        output = kmalloc(output_len, UM_GFP_KERNEL);
+        output = uml_kmalloc(output_len, UM_GFP_KERNEL);
         read_output(control_fds[0], output, output_len);
 
         if (output == NULL)
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index f25c29a12d00..30860b89ec58 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -7,6 +7,7 @@
 #include <unistd.h>
 #include <errno.h>
 #include <sched.h>
+#include <linux/limits.h>
 #include <sys/socket.h>
 #include <sys/wait.h>
 #include "kern_constants.h"
@@ -71,8 +72,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv)
         data.pre_data = pre_data;
         data.argv = argv;
         data.fd = fds[1];
-        data.buf = __cant_sleep() ? kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
-                                        kmalloc(PATH_MAX, UM_GFP_KERNEL);
+        data.buf = __cant_sleep() ? uml_kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
+                                        uml_kmalloc(PATH_MAX, UM_GFP_KERNEL);
         pid = clone(helper_child, (void *) sp, CLONE_VM, &data);
         if (pid < 0) {
                 ret = -errno;
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index abb9b0ffd960..eee69b9f52c9 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -199,7 +199,7 @@ void *__wrap_malloc(int size)
                 return __real_malloc(size);
         else if (size <= UM_KERN_PAGE_SIZE)
                 /* finding contiguous pages can be hard*/
-                ret = kmalloc(size, UM_GFP_KERNEL);
+                ret = uml_kmalloc(size, UM_GFP_KERNEL);
         else ret = vmalloc(size);
 
         /*
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index abf47a7c4abd..eb8f2e4be192 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Copyright (C) 2002 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
 
@@ -15,6 +15,7 @@
 #include "kern_util.h"
 #include "init.h"
 #include "os.h"
+#include "process.h"
 #include "sigio.h"
 #include "um_malloc.h"
 #include "user.h"
@@ -109,7 +110,7 @@ static int need_poll(struct pollfds *polls, int n)
         if (n <= polls->size)
                 return 0;
 
-        new = kmalloc(n * sizeof(struct pollfd), UM_GFP_ATOMIC);
+        new = uml_kmalloc(n * sizeof(struct pollfd), UM_GFP_ATOMIC);
         if (new == NULL) {
                 printk(UM_KERN_ERR "need_poll : failed to allocate new "
                        "pollfds\n");
@@ -243,7 +244,7 @@ static struct pollfd *setup_initial_poll(int fd)
 {
         struct pollfd *p;
 
-        p = kmalloc(sizeof(struct pollfd), UM_GFP_KERNEL);
+        p = uml_kmalloc(sizeof(struct pollfd), UM_GFP_KERNEL);
         if (p == NULL) {
                 printk(UM_KERN_ERR "setup_initial_poll : failed to allocate "
                        "poll\n");
@@ -338,20 +339,10 @@ out_close1:
         close(l_write_sigio_fds[1]);
 }
 
-/* Changed during early boot */
-static int pty_output_sigio = 0;
-static int pty_close_sigio = 0;
-
-void maybe_sigio_broken(int fd, int read)
+void sigio_broken(int fd, int read)
 {
         int err;
 
-        if (!isatty(fd))
-                return;
-
-        if ((read || pty_output_sigio) && (!read || pty_close_sigio))
-                return;
-
         write_sigio_workaround();
 
         sigio_lock();
@@ -370,6 +361,21 @@ out:
         sigio_unlock();
 }
 
+/* Changed during early boot */
+static int pty_output_sigio;
+static int pty_close_sigio;
+
+void maybe_sigio_broken(int fd, int read)
+{
+        if (!isatty(fd))
+                return;
+
+        if ((read || pty_output_sigio) && (!read || pty_close_sigio))
+                return;
+
+        sigio_broken(fd, read);
+}
+
 static void sigio_cleanup(void)
 {
         if (write_sigio_pid == -1)
@@ -383,7 +389,7 @@ static void sigio_cleanup(void)
 __uml_exitcall(sigio_cleanup);
 
 /* Used as a flag during SIGIO testing early in boot */
-static volatile int got_sigio = 0;
+static int got_sigio;
 
 static void __init handler(int sig)
 {
@@ -498,7 +504,8 @@ static void tty_output(int master, int slave)
         if (errno != EAGAIN)
                 printk(UM_KERN_ERR "tty_output : write failed, errno = %d\n",
                        errno);
-        while (((n = read(slave, buf, sizeof(buf))) > 0) && !got_sigio)
+        while (((n = read(slave, buf, sizeof(buf))) > 0) &&
+               !({ barrier(); got_sigio; }))
                 ;
 
         if (got_sigio) {
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 3f1694b134cb..5aade6027e40 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -12,6 +12,7 @@
 #include "as-layout.h"
 #include "kern_util.h"
 #include "os.h"
+#include "process.h"
 #include "sysdep/barrier.h"
 #include "sysdep/sigcontext.h"
 #include "user.h"
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 1e8cba6550a9..172ad8f72e12 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -55,7 +55,7 @@ static int ptrace_dump_regs(int pid)
  * Signals that are OK to receive in the stub - we'll just continue it.
  * SIGWINCH will happen when UML is inside a detached screen.
  */
-#define STUB_SIG_MASK (1 << SIGVTALRM)
+#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH))
 
 /* Signals that the stub will finish with - anything else is an error */
 #define STUB_DONE_MASK (1 << SIGTRAP)
@@ -442,7 +442,7 @@ void userspace(struct uml_pt_regs *regs)
                                 unblock_signals();
                                 break;
                         default:
-                                printk(UM_KERN_ERR "userspace - child stopped "
+                                printk(UM_KERN_ERR "userspace - child stopped "
                                        "with signal %d\n", sig);
                                 fatal_sigsegv();
                         }
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 997d01944f91..183db26d01bf 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -23,6 +23,7 @@
 #include "mem_user.h"
 #include "ptrace_user.h"
 #include "registers.h"
+#include "skas.h"
 #include "skas_ptrace.h"
 
 static void ptrace_child(void)
@@ -120,8 +121,10 @@ static int stop_ptraced_child(int pid, int exitcode, int mustexit)
 {
         int status, n, ret = 0;
 
-        if (ptrace(PTRACE_CONT, pid, 0, 0) < 0)
-                fatal_perror("stop_ptraced_child : ptrace failed");
+        if (ptrace(PTRACE_CONT, pid, 0, 0) < 0) {
+                perror("stop_ptraced_child : ptrace failed");
+                return -1;
+        }
         CATCH_EINTR(n = waitpid(pid, &status, 0));
         if (!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
                 int exit_with = WEXITSTATUS(status);
@@ -140,14 +143,27 @@ static int stop_ptraced_child(int pid, int exitcode, int mustexit)
 }
 
 /* Changed only during early boot */
-int ptrace_faultinfo = 1;
-int ptrace_ldt = 1;
-int proc_mm = 1;
-int skas_needs_stub = 0;
+int ptrace_faultinfo;
+static int disable_ptrace_faultinfo;
+
+int ptrace_ldt;
+static int disable_ptrace_ldt;
+
+int proc_mm;
+static int disable_proc_mm;
+
+int have_switch_mm;
+static int disable_switch_mm;
+
+int skas_needs_stub;
 
 static int __init skas0_cmd_param(char *str, int* add)
 {
-        ptrace_faultinfo = proc_mm = 0;
+        disable_ptrace_faultinfo = 1;
+        disable_ptrace_ldt = 1;
+        disable_proc_mm = 1;
+        disable_switch_mm = 1;
+
         return 0;
 }
 
@@ -157,15 +173,12 @@ static int __init mode_skas0_cmd_param(char *str, int* add)
         __attribute__((alias("skas0_cmd_param")));
 
 __uml_setup("skas0", skas0_cmd_param,
-                "skas0\n"
-                "    Disables SKAS3 usage, so that SKAS0 is used, unless \n"
-                "    you specify mode=tt.\n\n");
+"skas0\n"
+"    Disables SKAS3 and SKAS4 usage, so that SKAS0 is used\n\n");
 
 __uml_setup("mode=skas0", mode_skas0_cmd_param,
-                "mode=skas0\n"
-                "    Disables SKAS3 usage, so that SKAS0 is used, unless you \n"
-                "    specify mode=tt. Note that this was recently added - on \n"
-                "    older kernels you must use simply \"skas0\".\n\n");
+"mode=skas0\n"
+"    Disables SKAS3 and SKAS4 usage, so that SKAS0 is used.\n\n");
 
 /* Changed only during early boot */
 static int force_sysemu_disabled = 0;
@@ -201,7 +214,7 @@ static void __init check_sysemu(void)
         if (n < 0)
                 fatal_perror("check_sysemu : wait failed");
         if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP))
-                fatal("check_sysemu : expected SIGTRAP, got status = %d",
+                fatal("check_sysemu : expected SIGTRAP, got status = %d\n",
                       status);
 
         if (ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
@@ -243,9 +256,11 @@ static void __init check_sysemu(void)
 
                 if (WIFSTOPPED(status) &&
                     (WSTOPSIG(status) == (SIGTRAP|0x80))) {
-                        if (!count)
-                                fatal("check_ptrace : SYSEMU_SINGLESTEP "
-                                      "doesn't singlestep");
+                        if (!count) {
+                                non_fatal("check_ptrace : SYSEMU_SINGLESTEP "
+                                          "doesn't singlestep");
+                                goto fail;
+                        }
                         n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET,
                                    os_getpid());
                         if (n < 0)
@@ -255,9 +270,12 @@ static void __init check_sysemu(void)
                 }
                 else if (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGTRAP))
                         count++;
-                else
-                        fatal("check_ptrace : expected SIGTRAP or "
-                              "(SIGTRAP | 0x80), got status = %d", status);
+                else {
+                        non_fatal("check_ptrace : expected SIGTRAP or "
+                                  "(SIGTRAP | 0x80), got status = %d\n",
+                                  status);
+                        goto fail;
+                }
         }
         if (stop_ptraced_child(pid, 0, 0) < 0)
                 goto fail_stopped;
@@ -360,7 +378,7 @@ void __init os_early_checks(void)
 
 static int __init noprocmm_cmd_param(char *str, int* add)
 {
-        proc_mm = 0;
+        disable_proc_mm = 1;
         return 0;
 }
 
@@ -372,7 +390,7 @@ __uml_setup("noprocmm", noprocmm_cmd_param,
 
 static int __init noptracefaultinfo_cmd_param(char *str, int* add)
 {
-        ptrace_faultinfo = 0;
+        disable_ptrace_faultinfo = 1;
         return 0;
 }
 
@@ -384,7 +402,7 @@ __uml_setup("noptracefaultinfo", noptracefaultinfo_cmd_param,
 
 static int __init noptraceldt_cmd_param(char *str, int* add)
 {
-        ptrace_ldt = 0;
+        disable_ptrace_ldt = 1;
         return 0;
 }
 
@@ -404,17 +422,15 @@ static inline void check_skas3_ptrace_faultinfo(void)
 
         n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
         if (n < 0) {
-                ptrace_faultinfo = 0;
                 if (errno == EIO)
                         non_fatal("not found\n");
                 else
                         perror("not found");
-        }
+        } else if (disable_ptrace_faultinfo)
+                non_fatal("found but disabled on command line\n");
         else {
-                if (!ptrace_faultinfo)
-                        non_fatal("found but disabled on command line\n");
-                else
-                        non_fatal("found\n");
+                ptrace_faultinfo = 1;
+                non_fatal("found\n");
         }
 
         stop_ptraced_child(pid, 1, 1);
@@ -437,38 +453,30 @@ static inline void check_skas3_ptrace_ldt(void)
         if (n < 0) {
                 if (errno == EIO)
                         non_fatal("not found\n");
-                else {
+                else
                         perror("not found");
-                }
-                ptrace_ldt = 0;
-        }
+        } else if (disable_ptrace_ldt)
+                non_fatal("found, but use is disabled\n");
         else {
-                if (ptrace_ldt)
-                        non_fatal("found\n");
-                else
-                        non_fatal("found, but use is disabled\n");
+                ptrace_ldt = 1;
+                non_fatal("found\n");
         }
 
         stop_ptraced_child(pid, 1, 1);
-#else
-        /* PTRACE_LDT might be disabled via cmdline option.
-         * We want to override this, else we might use the stub
-         * without real need
-         */
-        ptrace_ldt = 1;
 #endif
 }
 
 static inline void check_skas3_proc_mm(void)
 {
         non_fatal("  - /proc/mm...");
-        if (access("/proc/mm", W_OK) < 0) {
-                proc_mm = 0;
+        if (access("/proc/mm", W_OK) < 0)
                 perror("not found");
-        }
-        else if (!proc_mm)
+        else if (disable_proc_mm)
                 non_fatal("found but disabled on command line\n");
-        else non_fatal("found\n");
+        else {
+                proc_mm = 1;
+                non_fatal("found\n");
+        }
 }
 
 void can_do_skas(void)
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index b613473b3ec1..229f7a53d8da 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -5,6 +5,8 @@
  */
 
 #include <errno.h>
+#include <sys/ptrace.h>
+#include <sys/user.h>
 #include "kern_constants.h"
 #include "longjmp.h"
 #include "user.h"
@@ -74,10 +76,10 @@ int put_fp_registers(int pid, unsigned long *regs)
 
 void arch_init_registers(int pid)
 {
-        unsigned long fpx_regs[HOST_XFP_SIZE];
+        struct user_fpxregs_struct fpx_regs;
         int err;
 
-        err = ptrace(PTRACE_GETFPXREGS, pid, 0, fpx_regs);
+        err = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpx_regs);
         if (!err)
                 return;
 
diff --git a/arch/um/os-Linux/sys-i386/task_size.c b/arch/um/os-Linux/sys-i386/task_size.c
index ccb49b0aff59..be04c1e183bf 100644
--- a/arch/um/os-Linux/sys-i386/task_size.c
+++ b/arch/um/os-Linux/sys-i386/task_size.c
@@ -63,7 +63,7 @@ static int page_ok(unsigned long page)
         return ok;
 }
 
-unsigned long os_get_task_size(void)
+unsigned long os_get_top_address(void)
 {
         struct sigaction sa, old;
         unsigned long bottom = 0;
@@ -76,9 +76,9 @@ unsigned long os_get_task_size(void)
          * hosts, but shouldn't hurt otherwise.
          */
         unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT;
-        unsigned long test;
+        unsigned long test, original;
 
-        printf("Locating the top of the address space ... ");
+        printf("Locating the bottom of the address space ... ");
         fflush(stdout);
 
         /*
@@ -89,16 +89,31 @@ unsigned long os_get_task_size(void)
         sigemptyset(&sa.sa_mask);
         sa.sa_flags = SA_NODEFER;
         if (sigaction(SIGSEGV, &sa, &old)) {
-                perror("os_get_task_size");
+                perror("os_get_top_address");
                 exit(1);
         }
 
-        if (!page_ok(bottom)) {
-                fprintf(stderr, "Address 0x%x no good?\n",
-                        bottom << UM_KERN_PAGE_SHIFT);
+        /* Manually scan the address space, bottom-up, until we find
+         * the first valid page (or run out of them).
+         */
+        for (bottom = 0; bottom < top; bottom++) {
+                if (page_ok(bottom))
+                        break;
+        }
+
+        /* If we've got this far, we ran out of pages. */
+        if (bottom == top) {
+                fprintf(stderr, "Unable to determine bottom of address "
+                        "space.\n");
                 exit(1);
         }
 
+        printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT);
+        printf("Locating the top of the address space ... ");
+        fflush(stdout);
+
+        original = bottom;
+
         /* This could happen with a 4G/4G split */
         if (page_ok(top))
                 goto out;
@@ -114,7 +129,7 @@ unsigned long os_get_task_size(void)
 out:
         /* Restore the old SIGSEGV handling */
         if (sigaction(SIGSEGV, &old, NULL)) {
-                perror("os_get_task_size");
+                perror("os_get_top_address");
                 exit(1);
         }
         top <<= UM_KERN_PAGE_SHIFT;
diff --git a/arch/um/os-Linux/sys-x86_64/task_size.c b/arch/um/os-Linux/sys-x86_64/task_size.c
index fad6f57f8ee3..26a0dd1f349c 100644
--- a/arch/um/os-Linux/sys-x86_64/task_size.c
+++ b/arch/um/os-Linux/sys-x86_64/task_size.c
@@ -1,4 +1,4 @@
-unsigned long os_get_task_size(unsigned long shift)
+unsigned long os_get_top_address(unsigned long shift)
 {
         /* The old value of CONFIG_TOP_ADDR */
         return 0x7fc0000000;
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index e49280599465..dec5678fc17f 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -9,7 +9,9 @@
 #include <time.h>
 #include <sys/time.h>
 #include "kern_constants.h"
+#include "kern_util.h"
 #include "os.h"
+#include "process.h"
 #include "user.h"
 
 int set_interval(void)
@@ -58,12 +60,17 @@ static inline long long timeval_to_ns(const struct timeval *tv)
 long long disable_timer(void)
 {
         struct itimerval time = ((struct itimerval) { { 0, 0 }, { 0, 0 } });
+        int remain, max = UM_NSEC_PER_SEC / UM_HZ;
 
         if (setitimer(ITIMER_VIRTUAL, &time, &time) < 0)
                 printk(UM_KERN_ERR "disable_timer - setitimer failed, "
                        "errno = %d\n", errno);
 
-        return timeval_to_ns(&time.it_value);
+        remain = timeval_to_ns(&time.it_value);
+        if (remain > max)
+                remain = max;
+
+        return remain;
 }
 
 long long os_nsecs(void)
@@ -79,7 +86,48 @@ static int after_sleep_interval(struct timespec *ts)
 {
         return 0;
 }
+
+static void deliver_alarm(void)
+{
+        alarm_handler(SIGVTALRM, NULL);
+}
+
+static unsigned long long sleep_time(unsigned long long nsecs)
+{
+        return nsecs;
+}
+
 #else
+unsigned long long last_tick;
+unsigned long long skew;
+
+static void deliver_alarm(void)
+{
+        unsigned long long this_tick = os_nsecs();
+        int one_tick = UM_NSEC_PER_SEC / UM_HZ;
+
+        /* Protection against the host's time going backwards */
+        if ((last_tick != 0) && (this_tick < last_tick))
+                this_tick = last_tick;
+
+        if (last_tick == 0)
+                last_tick = this_tick - one_tick;
+
+        skew += this_tick - last_tick;
+
+        while (skew >= one_tick) {
+                alarm_handler(SIGVTALRM, NULL);
+                skew -= one_tick;
+        }
+
+        last_tick = this_tick;
+}
+
+static unsigned long long sleep_time(unsigned long long nsecs)
+{
+        return nsecs > skew ? nsecs - skew : 0;
+}
+
 static inline long long timespec_to_us(const struct timespec *ts)
 {
         return ((long long) ts->tv_sec * UM_USEC_PER_SEC) +
@@ -102,6 +150,11 @@ static int after_sleep_interval(struct timespec *ts)
          */
         if (start_usecs > usec)
                 start_usecs = usec;
+
+        start_usecs -= skew / UM_NSEC_PER_USEC;
+        if (start_usecs < 0)
+                start_usecs = 0;
+
         tv = ((struct timeval) { .tv_sec  = start_usecs / UM_USEC_PER_SEC,
                                  .tv_usec = start_usecs % UM_USEC_PER_SEC });
         interval = ((struct itimerval) { { 0, usec }, tv });
@@ -113,8 +166,6 @@ static int after_sleep_interval(struct timespec *ts)
 }
 #endif
 
-extern void alarm_handler(int sig, struct sigcontext *sc);
-
 void idle_sleep(unsigned long long nsecs)
 {
         struct timespec ts;
@@ -126,10 +177,12 @@ void idle_sleep(unsigned long long nsecs)
          */
         if (nsecs == 0)
                 nsecs = UM_NSEC_PER_SEC / UM_HZ;
+
+        nsecs = sleep_time(nsecs);
         ts = ((struct timespec) { .tv_sec       = nsecs / UM_NSEC_PER_SEC,
                                   .tv_nsec      = nsecs % UM_NSEC_PER_SEC });
 
         if (nanosleep(&ts, &ts) == 0)
-                alarm_handler(SIGVTALRM, NULL);
+                deliver_alarm();
         after_sleep_interval(&ts);
 }
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index 6b4499906a6c..c9b176534d65 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -148,14 +148,13 @@ int peek_user(struct task_struct *child, long addr, long data)
 int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
         int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
-        long fpregs[HOST_FP_SIZE];
+        struct user_i387_struct fpregs;
 
-        BUG_ON(sizeof(*buf) != sizeof(fpregs));
-        err = save_fp_registers(userspace_pid[cpu], fpregs);
+        err = save_fp_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
         if (err)
                 return err;
 
-        n = copy_to_user(buf, fpregs, sizeof(fpregs));
+        n = copy_to_user(buf, &fpregs, sizeof(fpregs));
         if(n > 0)
                 return -EFAULT;
 
@@ -165,27 +164,26 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
         int n, cpu = ((struct thread_info *) child->stack)->cpu;
-        long fpregs[HOST_FP_SIZE];
+        struct user_i387_struct fpregs;
 
-        BUG_ON(sizeof(*buf) != sizeof(fpregs));
-        n = copy_from_user(fpregs, buf, sizeof(fpregs));
+        n = copy_from_user(&fpregs, buf, sizeof(fpregs));
         if (n > 0)
                 return -EFAULT;
 
-        return restore_fp_registers(userspace_pid[cpu], fpregs);
+        return restore_fp_registers(userspace_pid[cpu],
+                                    (unsigned long *) &fpregs);
 }
 
 int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 {
         int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
-        long fpregs[HOST_XFP_SIZE];
+        struct user_fxsr_struct fpregs;
 
-        BUG_ON(sizeof(*buf) != sizeof(fpregs));
-        err = save_fpx_registers(userspace_pid[cpu], fpregs);
+        err = save_fpx_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
         if (err)
                 return err;
 
-        n = copy_to_user(buf, fpregs, sizeof(fpregs));
+        n = copy_to_user(buf, &fpregs, sizeof(fpregs));
         if(n > 0)
                 return -EFAULT;
 
@@ -195,14 +193,14 @@ int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 {
         int n, cpu = ((struct thread_info *) child->stack)->cpu;
-        long fpregs[HOST_XFP_SIZE];
+        struct user_fxsr_struct fpregs;
 
-        BUG_ON(sizeof(*buf) != sizeof(fpregs));
-        n = copy_from_user(fpregs, buf, sizeof(fpregs));
+        n = copy_from_user(&fpregs, buf, sizeof(fpregs));
         if (n > 0)
                 return -EFAULT;
 
-        return restore_fpx_registers(userspace_pid[cpu], fpregs);
+        return restore_fpx_registers(userspace_pid[cpu],
+                                     (unsigned long *) &fpregs);
 }
 
 long subarch_ptrace(struct task_struct *child, long request, long addr,
diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c
index 39bd32bf84f0..5f883bfe773f 100644
--- a/arch/um/sys-i386/user-offsets.c
+++ b/arch/um/sys-i386/user-offsets.c
@@ -22,7 +22,7 @@ void foo(void)
         OFFSET(HOST_SC_CR2, sigcontext, cr2);
 
         DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_fpregs_struct));
-        DEFINE_LONGS(HOST_XFP_SIZE, sizeof(struct user_fpxregs_struct));
+        DEFINE_LONGS(HOST_FPX_SIZE, sizeof(struct user_fpxregs_struct));
 
         DEFINE(HOST_IP, EIP);
         DEFINE(HOST_SP, UESP);
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c
index 4d7d1a812d8f..1db2fce00948 100644
--- a/arch/um/sys-x86_64/ksyms.c
+++ b/arch/um/sys-x86_64/ksyms.c
@@ -1,5 +1,11 @@
-#include "linux/module.h"
-#include "asm/string.h"
+#include <linux/module.h>
+#include <asm/string.h>
+#include <asm/checksum.h>
 
 /*XXX: we need them because they would be exported by x86_64 */
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
+EXPORT_SYMBOL(memcpy);
+#else
 EXPORT_SYMBOL(__memcpy);
+#endif
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
index 2f3443c6e859..973585414a66 100644
--- a/arch/um/sys-x86_64/user-offsets.c
+++ b/arch/um/sys-x86_64/user-offsets.c
@@ -24,7 +24,6 @@ void foo(void)
         OFFSET(HOST_SC_TRAPNO, sigcontext, trapno);
 
         DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
-        DEFINE(HOST_XFP_SIZE, 0);
         DEFINE_LONGS(HOST_RBX, RBX);
         DEFINE_LONGS(HOST_RCX, RCX);
         DEFINE_LONGS(HOST_RDI, RDI);
diff --git a/arch/v850/kernel/init_task.c b/arch/v850/kernel/init_task.c
index ed2f93cf7c66..44b274dff33f 100644
--- a/arch/v850/kernel/init_task.c
+++ b/arch/v850/kernel/init_task.c
@@ -21,7 +21,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS (init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM (init_mm);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fe361ae7ef2f..52e18e6d2ba0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -26,17 +26,10 @@ config X86
         select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
         select HAVE_ARCH_KGDB if !X86_VOYAGER
 
-config DEFCONFIG_LIST
+config ARCH_DEFCONFIG
         string
-        depends on X86_32
-        option defconfig_list
-        default "arch/x86/configs/i386_defconfig"
-
-config DEFCONFIG_LIST
-        string
-        depends on X86_64
-        option defconfig_list
-        default "arch/x86/configs/x86_64_defconfig"
+        default "arch/x86/configs/i386_defconfig" if X86_32
+        default "arch/x86/configs/x86_64_defconfig" if X86_64
 
 
 config GENERIC_LOCKBREAK
@@ -1515,13 +1508,13 @@ config PCI_GOMMCONFIG
 config PCI_GODIRECT
         bool "Direct"
 
-config PCI_GOANY
-        bool "Any"
-
 config PCI_GOOLPC
         bool "OLPC"
         depends on OLPC
 
+config PCI_GOANY
+        bool "Any"
+
 endchoice
 
 config PCI_BIOS
@@ -1538,9 +1531,8 @@ config PCI_MMCONFIG
         depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
 
 config PCI_OLPC
-        bool
-        depends on PCI && PCI_GOOLPC
-        default y
+        def_bool y
+        depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
 
 config PCI_DOMAINS
         def_bool y
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index ac1e31ba4795..18363374d51a 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -6,15 +6,19 @@ config TRACE_IRQFLAGS_SUPPORT
 source "lib/Kconfig.debug"
 
 config NONPROMISC_DEVMEM
-        bool "Disable promiscuous /dev/mem"
+        bool "Filter access to /dev/mem"
         help
-          The /dev/mem file by default only allows userspace access to PCI
-          space and the BIOS code and data regions. This is sufficient for
-          dosemu and X and all common users of /dev/mem. With this config
-          option, you allow userspace access to all of memory, including
-          kernel and userspace memory. Accidental access to this is
-          obviously disasterous, but specific access can be used by people
-          debugging the kernel.
+          If this option is left off, you allow userspace access to all
+          of memory, including kernel and userspace memory. Accidental
+          access to this is obviously disastrous, but specific access can
+          be used by people debugging the kernel.
+
+          If this option is switched on, the /dev/mem file only allows
+          userspace access to PCI space and the BIOS code and data regions.
+          This is sufficient for dosemu and X and all common users of
+          /dev/mem.
+
+          If in doubt, say Y.
 
 config EARLY_PRINTK
         bool "Early printk" if EMBEDDED
diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c
index 90943f83e84d..e01aafd03bde 100644
--- a/arch/x86/boot/a20.c
+++ b/arch/x86/boot/a20.c
@@ -115,8 +115,6 @@ static void enable_a20_fast(void)
 
 int enable_a20(void)
 {
-        int loops = A20_ENABLE_LOOPS;
-
 #if defined(CONFIG_X86_ELAN)
         /* Elan croaks if we try to touch the KBC */
         enable_a20_fast();
@@ -128,6 +126,7 @@ int enable_a20(void)
         enable_a20_kbc();
         return 0;
 #else
+       int loops = A20_ENABLE_LOOPS;
         while (loops--) {
                 /* First, check to see if A20 is already enabled
                    (legacy free, etc.) */
diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c
index c1d00c0274c4..50e47cdbdddd 100644
--- a/arch/x86/boot/printf.c
+++ b/arch/x86/boot/printf.c
@@ -56,7 +56,7 @@ static char *number(char *str, long num, int base, int size, int precision,
         if (type & LEFT)
                 type &= ~ZEROPAD;
         if (base < 2 || base > 36)
-                return 0;
+                return NULL;
         c = (type & ZEROPAD) ? '0' : ' ';
         sign = 0;
         if (type & SIGN) {
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index c49ebcc6c41e..33c5216fd3e1 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -242,12 +242,19 @@ static int __init acpi_parse_madt(struct acpi_table_header *table)
 
 static void __cpuinit acpi_register_lapic(int id, u8 enabled)
 {
+        unsigned int ver = 0;
+
         if (!enabled) {
                 ++disabled_cpus;
                 return;
         }
 
-        generic_processor_info(id, 0);
+#ifdef CONFIG_X86_32
+        if (boot_cpu_physical_apicid != -1U)
+                ver = apic_version[boot_cpu_physical_apicid];
+#endif
+
+        generic_processor_info(id, ver);
 }
 
 static int __init
@@ -767,8 +774,13 @@ static void __init acpi_register_lapic_address(unsigned long address)
         mp_lapic_addr = address;
 
         set_fixmap_nocache(FIX_APIC_BASE, address);
-        if (boot_cpu_physical_apicid == -1U)
+        if (boot_cpu_physical_apicid == -1U) {
                 boot_cpu_physical_apicid  = GET_APIC_ID(read_apic_id());
+#ifdef CONFIG_X86_32
+                apic_version[boot_cpu_physical_apicid] =
+                         GET_APIC_VERSION(apic_read(APIC_LVR));
+#endif
+        }
 }
 
 static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
index 22fab6c4be15..7da00b799cda 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
@@ -12,11 +12,6 @@ ENTRY(_start)
 
 SECTIONS
 {
-        . = HEADER_OFFSET;
-        .header : {
-                 *(.header)
-        }
-
         . = 0;
         .text : {
                  *(.text*)
@@ -50,6 +45,11 @@ SECTIONS
                 __bss_end = .;
         }
 
+        . = HEADER_OFFSET;
+        .header : {
+                *(.header)
+        }
+
         . = ALIGN(16);
         _end = .;
 
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 5910020c3f24..0633cfd0dc29 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -534,7 +534,7 @@ int setup_profiling_timer(unsigned int multiplier)
  */
 void clear_local_APIC(void)
 {
-        int maxlvt = lapic_get_maxlvt();
+        int maxlvt;
         u32 v;
 
         /* APIC hasn't been mapped yet */
diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c
index af4a867a097c..777a7ff075de 100644
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ b/arch/x86/kernel/cpu/cpufreq/longrun.c
@@ -245,7 +245,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
         if ((ecx > 95) || (ecx == 0) || (eax < ebx))
                 return -EIO;
 
-        edx = (eax - ebx) / (100 - ecx);
+        edx = ((eax - ebx) * 100) / (100 - ecx);
         *low_freq = edx * 1000; /* back to kHz */
 
         dprintk("low frequency is %u kHz\n", *low_freq);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 46d4034d9f37..206791eb46e3 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1127,12 +1127,23 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
                  * an UP version, and is deprecated by AMD.
                  */
                 if (num_online_cpus() != 1) {
-                        printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
+#ifndef CONFIG_ACPI_PROCESSOR
+                        printk(KERN_ERR PFX "ACPI Processor support is required "
+                               "for SMP systems but is absent. Please load the "
+                               "ACPI Processor module before starting this "
+                               "driver.\n");
+#else
+                        printk(KERN_ERR PFX "Your BIOS does not provide ACPI "
+                               "_PSS objects in a way that Linux understands. "
+                               "Please report this to the Linux ACPI maintainers"
+                               " and complain to your BIOS vendor.\n");
+#endif
                         kfree(data);
                         return -ENODEV;
                 }
                 if (pol->cpu != 0) {
-                        printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n");
+                        printk(KERN_ERR PFX "No ACPI _PSS objects for CPU other than "
+                               "CPU0. Complain to your BIOS vendor.\n");
                         kfree(data);
                         return -ENODEV;
                 }
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 2a609dc3271c..c778e4fa55a2 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -248,6 +248,7 @@ ENTRY(resume_userspace)
         DISABLE_INTERRUPTS(CLBR_ANY)    # make sure we don't miss an interrupt
                                         # setting need_resched or sigpending
                                         # between sampling and the iret
+        TRACE_IRQS_OFF
         movl TI_flags(%ebp), %ecx
         andl $_TIF_WORK_MASK, %ecx      # is there any work to be done on
                                         # int/exception return?
diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c
index e8edd63ab000..9b08e852fd1a 100644
--- a/arch/x86/kernel/geode_32.c
+++ b/arch/x86/kernel/geode_32.c
@@ -166,6 +166,8 @@ int geode_has_vsa2(void)
         static int has_vsa2 = -1;
 
         if (has_vsa2 == -1) {
+                u16 val;
+
                 /*
                  * The VSA has virtual registers that we can query for a
                  * signature.
@@ -173,7 +175,8 @@ int geode_has_vsa2(void)
                 outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
                 outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);
 
-                has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG);
+                val = inw(VSA_VRC_DATA);
+                has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG);
         }
 
         return has_vsa2;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index b2cc73768a9d..f7357cc0162c 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -189,7 +189,7 @@ default_entry:
          * this stage.
          */
 
-#define KPMDS ((0x100000000-__PAGE_OFFSET) >> 30) /* Number of kernel PMDs */
+#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
 
         xorl %ebx,%ebx                          /* %ebx is kept at zero */
 
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index e03cc952f233..eb9ddd8efb82 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -56,6 +56,11 @@ void __cpuinit mxcsr_feature_mask_init(void)
 
 void __init init_thread_xstate(void)
 {
+        if (!HAVE_HWFP) {
+                xstate_size = sizeof(struct i387_soft_struct);
+                return;
+        }
+
         if (cpu_has_fxsr)
                 xstate_size = sizeof(struct i387_fxsave_struct);
 #ifdef CONFIG_X86_32
@@ -94,7 +99,7 @@ void __cpuinit fpu_init(void)
 int init_fpu(struct task_struct *tsk)
 {
         if (tsk_used_math(tsk)) {
-                if (tsk == current)
+                if (HAVE_HWFP && tsk == current)
                         unlazy_fpu(tsk);
                 return 0;
         }
@@ -109,6 +114,15 @@ int init_fpu(struct task_struct *tsk)
                         return -ENOMEM;
         }
 
+#ifdef CONFIG_X86_32
+        if (!HAVE_HWFP) {
+                memset(tsk->thread.xstate, 0, xstate_size);
+                finit();
+                set_stopped_child_used_math(tsk);
+                return 0;
+        }
+#endif
+
         if (cpu_has_fxsr) {
                 struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
 
@@ -330,13 +344,13 @@ int fpregs_get(struct task_struct *target, const struct user_regset *regset,
         struct user_i387_ia32_struct env;
         int ret;
 
-        if (!HAVE_HWFP)
-                return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
-
         ret = init_fpu(target);
         if (ret)
                 return ret;
 
+        if (!HAVE_HWFP)
+                return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
+
         if (!cpu_has_fxsr) {
                 return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
                                            &target->thread.xstate->fsave, 0,
@@ -360,15 +374,15 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
         struct user_i387_ia32_struct env;
         int ret;
 
-        if (!HAVE_HWFP)
-                return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
-
         ret = init_fpu(target);
         if (ret)
                 return ret;
 
         set_stopped_child_used_math(target);
 
+        if (!HAVE_HWFP)
+                return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
+
         if (!cpu_has_fxsr) {
                 return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
                                           &target->thread.xstate->fsave, 0, -1);
@@ -474,18 +488,18 @@ static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf)
 int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
 {
         int err;
+        struct task_struct *tsk = current;
 
-        if (HAVE_HWFP) {
-                struct task_struct *tsk = current;
-
+        if (HAVE_HWFP)
                 clear_fpu(tsk);
 
-                if (!used_math()) {
-                        err = init_fpu(tsk);
-                        if (err)
-                                return err;
-                }
+        if (!used_math()) {
+                err = init_fpu(tsk);
+                if (err)
+                        return err;
+        }
 
+        if (HAVE_HWFP) {
                 if (cpu_has_fxsr)
                         err = restore_i387_fxsave(buf);
                 else
diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c
index 3d01e47777db..a4f93b4120c1 100644
--- a/arch/x86/kernel/init_task.c
+++ b/arch/x86/kernel/init_task.c
@@ -11,7 +11,6 @@
 #include <asm/desc.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index a40d54fc1fdd..4dc8600d9d20 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -2130,14 +2130,10 @@ static inline void __init check_timer(void)
 {
         int apic1, pin1, apic2, pin2;
         int vector;
-        unsigned int ver;
         unsigned long flags;
 
         local_irq_save(flags);
 
-        ver = apic_read(APIC_LVR);
-        ver = GET_APIC_VERSION(ver);
-
         /*
          * get/set the timer IRQ vector:
          */
@@ -2150,15 +2146,11 @@ static inline void __init check_timer(void)
          * mode for the 8259A whenever interrupts are routed
          * through I/O APICs.  Also IRQ0 has to be enabled in
          * the 8259A which implies the virtual wire has to be
-         * disabled in the local APIC.  Finally timer interrupts
-         * need to be acknowledged manually in the 8259A for
-         * timer_interrupt() and for the i82489DX when using
-         * the NMI watchdog.
+         * disabled in the local APIC.
          */
         apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
         init_8259A(1);
-        timer_ack = !cpu_has_tsc;
-        timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
+        timer_ack = 1;
         if (timer_over_8254 > 0)
                 enable_8259A_irq(0);
 
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 4bc1be5d5472..08a30986d472 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -53,7 +53,7 @@ static cycle_t kvm_clock_read(void);
  * have elapsed since the hypervisor wrote the data. So we try to account for
  * that with system time
  */
-unsigned long kvm_get_wallclock(void)
+static unsigned long kvm_get_wallclock(void)
 {
         u32 wc_sec, wc_nsec;
         u64 delta;
@@ -86,7 +86,7 @@ unsigned long kvm_get_wallclock(void)
         return ts.tv_sec + 1;
 }
 
-int kvm_set_wallclock(unsigned long now)
+static int kvm_set_wallclock(unsigned long now)
 {
         return 0;
 }
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 3cad17fe026b..07c0f828f488 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -155,6 +155,7 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
         wrmsr(msr, value, dummy);
         return 0;
 }
+EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
 
 int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
 {
@@ -222,6 +223,7 @@ int geode_mfgpt_alloc_timer(int timer, int domain)
         /* No timers available - too bad */
         return -1;
 }
+EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
 
 
 #ifdef CONFIG_GEODE_MFGPT_TIMER
diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c
index 11b14bbaa61e..84160f74eeb0 100644
--- a/arch/x86/kernel/nmi_32.c
+++ b/arch/x86/kernel/nmi_32.c
@@ -26,7 +26,6 @@
 
 #include <asm/smp.h>
 #include <asm/nmi.h>
-#include <asm/timer.h>
 
 #include "mach_traps.h"
 
@@ -82,7 +81,7 @@ int __init check_nmi_watchdog(void)
 
         prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
         if (!prev_nmi_count)
-                goto error;
+                return -1;
 
         printk(KERN_INFO "Testing NMI watchdog ... ");
 
@@ -119,7 +118,7 @@ int __init check_nmi_watchdog(void)
         if (!atomic_read(&nmi_active)) {
                 kfree(prev_nmi_count);
                 atomic_set(&nmi_active, -1);
-                goto error;
+                return -1;
         }
         printk("OK.\n");
 
@@ -130,10 +129,6 @@ int __init check_nmi_watchdog(void)
 
         kfree(prev_nmi_count);
         return 0;
-error:
-        timer_ack = !cpu_has_tsc;
-
-        return -1;
 }
 
 static int __init setup_nmi_watchdog(char *str)
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 0c37f16b6950..dc00a1331ace 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -378,6 +378,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
         struct page *page;
         unsigned long dma_mask = 0;
         dma_addr_t bus;
+        int noretry = 0;
 
         /* ignore region specifiers */
         gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
@@ -385,30 +386,37 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
         if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory))
                 return memory;
 
-        if (!dev)
+        if (!dev) {
                 dev = &fallback_dev;
+                gfp |= GFP_DMA;
+        }
         dma_mask = dev->coherent_dma_mask;
         if (dma_mask == 0)
-                dma_mask = DMA_32BIT_MASK;
+                dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK;
 
         /* Device not DMA able */
         if (dev->dma_mask == NULL)
                 return NULL;
 
-        /* Don't invoke OOM killer */
-        gfp |= __GFP_NORETRY;
+        /* Don't invoke OOM killer or retry in lower 16MB DMA zone */
+        if (gfp & __GFP_DMA)
+                noretry = 1;
 
 #ifdef CONFIG_X86_64
         /* Why <=? Even when the mask is smaller than 4GB it is often
            larger than 16MB and in this case we have a chance of
            finding fitting memory in the next higher zone first. If
            not retry with true GFP_DMA. -AK */
-        if (dma_mask <= DMA_32BIT_MASK)
+        if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
                 gfp |= GFP_DMA32;
+                if (dma_mask < DMA_32BIT_MASK)
+                        noretry = 1;
+        }
 #endif
 
  again:
-        page = dma_alloc_pages(dev, gfp, get_order(size));
+        page = dma_alloc_pages(dev,
+                noretry ? gfp | __GFP_NORETRY : gfp, get_order(size));
         if (page == NULL)
                 return NULL;
 
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index c07455d1695f..aa8ec928caa8 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -26,6 +26,7 @@
 #include <linux/kdebug.h>
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
+#include <linux/sysdev.h>
 #include <asm/atomic.h>
 #include <asm/io.h>
 #include <asm/mtrr.h>
@@ -548,6 +549,28 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size)
         return aper_base;
 }
 
+static int gart_resume(struct sys_device *dev)
+{
+        return 0;
+}
+
+static int gart_suspend(struct sys_device *dev, pm_message_t state)
+{
+        return -EINVAL;
+}
+
+static struct sysdev_class gart_sysdev_class = {
+        .name = "gart",
+        .suspend = gart_suspend,
+        .resume = gart_resume,
+
+};
+
+static struct sys_device device_gart = {
+        .id     = 0,
+        .cls    = &gart_sysdev_class,
+};
+
 /*
  * Private Northbridge GATT initialization in case we cannot use the
  * AGP driver for some reason.
@@ -558,7 +581,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
         unsigned aper_base, new_aper_base;
         struct pci_dev *dev;
         void *gatt;
-        int i;
+        int i, error;
 
         printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
         aper_size = aper_base = info->aper_size = 0;
@@ -606,6 +629,12 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
                 pci_write_config_dword(dev, 0x90, ctl);
         }
+
+        error = sysdev_class_register(&gart_sysdev_class);
+        if (!error)
+                error = sysdev_register(&device_gart);
+        if (error)
+                panic("Could not register gart_sysdev -- would corrupt data on next suspend");
         flush_gart();
 
         printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 67e9b4a1e89d..ba370dc8685b 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -99,15 +99,6 @@ static void mwait_idle(void)
                 local_irq_enable();
 }
 
-
-static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
-{
-        if (force_mwait)
-                return 1;
-        /* Any C1 states supported? */
-        return c->cpuid_level >= 5 && ((cpuid_edx(5) >> 4) & 0xf) > 0;
-}
-
 /*
  * On SMP it's slightly faster (but much more power-consuming!)
  * to poll the ->work.need_resched flag instead of waiting for the
@@ -119,6 +110,33 @@ static void poll_idle(void)
         cpu_relax();
 }
 
+/*
+ * mwait selection logic:
+ *
+ * It depends on the CPU. For AMD CPUs that support MWAIT this is
+ * wrong. Family 0x10 and 0x11 CPUs will enter C1 on HLT. Powersavings
+ * then depend on a clock divisor and current Pstate of the core. If
+ * all cores of a processor are in halt state (C1) the processor can
+ * enter the C1E (C1 enhanced) state. If mwait is used this will never
+ * happen.
+ *
+ * idle=mwait overrides this decision and forces the usage of mwait.
+ */
+static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
+{
+        if (force_mwait)
+                return 1;
+
+        if (c->x86_vendor == X86_VENDOR_AMD) {
+                switch(c->x86) {
+                case 0x10:
+                case 0x11:
+                        return 0;
+                }
+        }
+        return 1;
+}
+
 void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 {
         static int selected;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index f8476dfbb60d..e2db9ac5c61c 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -333,6 +333,7 @@ void flush_thread(void)
         /*
          * Forget coprocessor state..
          */
+        tsk->fpu_counter = 0;
         clear_fpu(tsk);
         clear_used_math();
 }
@@ -649,8 +650,11 @@ struct task_struct * __switch_to(struct task_struct *prev_p, struct task_struct
         /* If the task has used fpu the last 5 timeslices, just do a full
          * restore of the math state immediately to avoid the trap; the
          * chances of needing FPU soon are obviously high now
+         *
+         * tsk_used_math() checks prevent calling math_state_restore(),
+         * which can sleep in the case of !tsk_used_math()
          */
-        if (next_p->fpu_counter > 5)
+        if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
                 math_state_restore();
 
         /*
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e2319f39988b..c6eb5c91e5f6 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -294,6 +294,7 @@ void flush_thread(void)
         /*
          * Forget coprocessor state..
          */
+        tsk->fpu_counter = 0;
         clear_fpu(tsk);
         clear_used_math();
 }
@@ -658,8 +659,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
         /* If the task has used fpu the last 5 timeslices, just do a full
          * restore of the math state immediately to avoid the trap; the
          * chances of needing FPU soon are obviously high now
+         *
+         * tsk_used_math() checks prevent calling math_state_restore(),
+         * which can sleep in the case of !tsk_used_math()
          */
-        if (next_p->fpu_counter>5)
+        if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
                 math_state_restore();
         return prev_p;
 }
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index fb03ef380f0e..a7835f282936 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1303,6 +1303,9 @@ static const struct user_regset_view user_x86_64_view = {
 #define genregs32_get           genregs_get
 #define genregs32_set           genregs_set
 
+#define user_i387_ia32_struct   user_i387_struct
+#define user32_fxsr_struct      user_fxsr_struct
+
 #endif  /* CONFIG_X86_64 */
 
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
@@ -1315,13 +1318,13 @@ static const struct user_regset x86_32_regsets[] = {
         },
         [REGSET_FP] = {
                 .core_note_type = NT_PRFPREG,
-                .n = sizeof(struct user_i387_struct) / sizeof(u32),
+                .n = sizeof(struct user_i387_ia32_struct) / sizeof(u32),
                 .size = sizeof(u32), .align = sizeof(u32),
                 .active = fpregs_active, .get = fpregs_get, .set = fpregs_set
         },
         [REGSET_XFP] = {
                 .core_note_type = NT_PRXFPREG,
-                .n = sizeof(struct user_i387_struct) / sizeof(u32),
+                .n = sizeof(struct user32_fxsr_struct) / sizeof(u32),
                 .size = sizeof(u32), .align = sizeof(u32),
                 .active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
         },
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 9615eee9b775..05191bbc68b8 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -4,6 +4,8 @@
 #include <linux/acpi.h>
 #include <linux/bcd.h>
 #include <linux/mc146818rtc.h>
+#include <linux/platform_device.h>
+#include <linux/pnp.h>
 
 #include <asm/time.h>
 #include <asm/vsyscall.h>
@@ -197,3 +199,35 @@ unsigned long long native_read_tsc(void)
 }
 EXPORT_SYMBOL(native_read_tsc);
 
+
+static struct resource rtc_resources[] = {
+        [0] = {
+                .start  = RTC_PORT(0),
+                .end    = RTC_PORT(1),
+                .flags  = IORESOURCE_IO,
+        },
+        [1] = {
+                .start  = RTC_IRQ,
+                .end    = RTC_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+
+static struct platform_device rtc_device = {
+        .name           = "rtc_cmos",
+        .id             = -1,
+        .resource       = rtc_resources,
+        .num_resources  = ARRAY_SIZE(rtc_resources),
+};
+
+static __init int add_rtc_cmos(void)
+{
+#ifdef CONFIG_PNP
+        if (!pnp_platform_devices)
+                platform_device_register(&rtc_device);
+#else
+        platform_device_register(&rtc_device);
+#endif /* CONFIG_PNP */
+        return 0;
+}
+device_initcall(add_rtc_cmos);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c0c68c18a788..6f80b852a196 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -12,6 +12,7 @@
 #include <asm/mpspec.h>
 #include <asm/apicdef.h>
 
+#ifdef CONFIG_X86_LOCAL_APIC
 unsigned int num_processors;
 unsigned disabled_cpus __cpuinitdata;
 /* Processor that is doing the boot up */
@@ -23,8 +24,9 @@ EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
 
 /* Bitmask of physically existing CPUs */
 physid_mask_t phys_cpu_present_map;
+#endif
 
-#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_SMP)
+#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
 /*
  * Copy data used in early init routines from the initial arrays to the
  * per cpu data areas.  These arrays then become expendable and the
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 2c5f8b213e86..5a2f8e063887 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -532,10 +532,16 @@ static void __init reserve_crashkernel(void)
                                         (unsigned long)(crash_size >> 20),
                                         (unsigned long)(crash_base >> 20),
                                         (unsigned long)(total_mem >> 20));
+
+                        if (reserve_bootmem(crash_base, crash_size,
+                                        BOOTMEM_EXCLUSIVE) < 0) {
+                                printk(KERN_INFO "crashkernel reservation "
+                                        "failed - memory is in use\n");
+                                return;
+                        }
+
                         crashk_res.start = crash_base;
                         crashk_res.end   = crash_base + crash_size - 1;
-                        reserve_bootmem(crash_base, crash_size,
-                                        BOOTMEM_DEFAULT);
                 } else
                         printk(KERN_INFO "crashkernel reservation failed - "
                                         "you have to specify a base address\n");
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index f2fc8feb727d..6dff1286ad8a 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -951,7 +951,7 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
 {
         if (c->x86 == 0x6 && c->x86_model >= 0xf)
-                set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+                set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 }
 
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 8f75893a6467..0cb7aadc87cd 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -231,7 +231,8 @@ native_smp_call_function_mask(cpumask_t mask,
         wmb();
 
         /* Send a message to other CPUs */
-        if (cpus_equal(mask, allbutself))
+        if (cpus_equal(mask, allbutself) &&
+            cpus_equal(cpu_online_map, cpu_callout_map))
                 send_IPI_allbutself(CALL_FUNCTION_VECTOR);
         else
                 send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 6b087ab6cd8f..56078d61c793 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -86,6 +86,7 @@ void *x86_bios_cpu_apicid_early_ptr;
 
 #ifdef CONFIG_X86_32
 u8 apicid_2_node[MAX_APICID];
+static int low_mappings;
 #endif
 
 /* State of each CPU */
@@ -326,6 +327,12 @@ static void __cpuinit start_secondary(void *unused)
                 enable_8259A_irq(0);
         }
 
+#ifdef CONFIG_X86_32
+        while (low_mappings)
+                cpu_relax();
+        __flush_tlb_all();
+#endif
+
         /* This must be done before setting cpu_online_map */
         set_cpu_sibling_map(raw_smp_processor_id());
         wmb();
@@ -1040,14 +1047,20 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 #ifdef CONFIG_X86_32
         /* init low mem mapping */
         clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
-                        min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
+                min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
         flush_tlb_all();
-#endif
+        low_mappings = 1;
+
+        err = do_boot_cpu(apicid, cpu);
 
+        zap_low_mappings();
+        low_mappings = 0;
+#else
         err = do_boot_cpu(apicid, cpu);
-        if (err < 0) {
+#endif
+        if (err) {
                 Dprintk("do_boot_cpu failed %d\n", err);
-                return err;
+                return -EIO;
         }
 
         /*
@@ -1177,6 +1190,7 @@ static void __init smp_cpu_index_default(void)
  */
 void __init native_smp_prepare_cpus(unsigned int max_cpus)
 {
+        preempt_disable();
         nmi_watchdog_default();
         smp_cpu_index_default();
         current_cpu_data = boot_cpu_data;
@@ -1193,7 +1207,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
         if (smp_sanity_check(max_cpus) < 0) {
                 printk(KERN_INFO "SMP disabled\n");
                 disable_smp();
-                return;
+                goto out;
         }
 
         preempt_disable();
@@ -1233,6 +1247,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
         printk(KERN_INFO "CPU%d: ", 0);
         print_cpu_info(&cpu_data(0));
         setup_boot_clock();
+out:
+        preempt_enable();
 }
 /*
  * Early setup to make printk work.
@@ -1259,9 +1275,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
         setup_ioapic_dest();
 #endif
         check_nmi_watchdog();
-#ifdef CONFIG_X86_32
-        zap_low_mappings();
-#endif
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index bde6f63e15d5..08d752de4eee 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -544,6 +544,7 @@ vm86_trap:
 #define DO_ERROR(trapnr, signr, str, name)                              \
 void do_##name(struct pt_regs *regs, long error_code)                   \
 {                                                                       \
+        trace_hardirqs_fixup();                                         \
         if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)  \
                                                 == NOTIFY_STOP)         \
                 return;                                                 \
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index e4790728b224..65b70637ad97 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -14,7 +14,10 @@
 
 #include "mach_timer.h"
 
-static int tsc_enabled;
+/* native_sched_clock() is called before tsc_init(), so
+   we must start with the TSC soft disabled to prevent
+   erroneous rdtsc usage on !cpu_has_tsc processors */
+static int tsc_disabled = -1;
 
 /*
  * On some systems the TSC frequency does not
@@ -28,8 +31,8 @@ EXPORT_SYMBOL_GPL(tsc_khz);
 static int __init tsc_setup(char *str)
 {
         printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
-                                "cannot disable TSC completely.\n");
-        mark_tsc_unstable("user disabled TSC");
+               "cannot disable TSC completely.\n");
+        tsc_disabled = 1;
         return 1;
 }
 #else
@@ -120,7 +123,7 @@ unsigned long long native_sched_clock(void)
          *   very important for it to be as fast as the platform
          *   can achive it. )
          */
-        if (unlikely(!tsc_enabled && !tsc_unstable))
+        if (unlikely(tsc_disabled))
                 /* No locking but a rare wrong value is not a big deal: */
                 return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
 
@@ -322,7 +325,6 @@ void mark_tsc_unstable(char *reason)
 {
         if (!tsc_unstable) {
                 tsc_unstable = 1;
-                tsc_enabled = 0;
                 printk("Marking TSC unstable due to: %s.\n", reason);
                 /* Can be called before registration */
                 if (clocksource_tsc.mult)
@@ -336,7 +338,7 @@ EXPORT_SYMBOL_GPL(mark_tsc_unstable);
 static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
 {
         printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
-                       d->ident);
+               d->ident);
         tsc_unstable = 1;
         return 0;
 }
@@ -403,7 +405,7 @@ void __init tsc_init(void)
 {
         int cpu;
 
-        if (!cpu_has_tsc)
+        if (!cpu_has_tsc || tsc_disabled > 0)
                 return;
 
         cpu_khz = calculate_cpu_khz();
@@ -414,6 +416,9 @@ void __init tsc_init(void)
                 return;
         }
 
+        /* now allow native_sched_clock() to use rdtsc */
+        tsc_disabled = 0;
+
         printk("Detected %lu.%03lu MHz processor.\n",
                                 (unsigned long)cpu_khz / 1000,
                                 (unsigned long)cpu_khz % 1000);
@@ -441,8 +446,6 @@ void __init tsc_init(void)
         if (check_tsc_unstable()) {
                 clocksource_tsc.rating = 0;
                 clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
-        } else
-                tsc_enabled = 1;
-
+        }
         clocksource_register(&clocksource_tsc);
 }
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
index fcc16e58609e..1784b8077a12 100644
--- a/arch/x86/kernel/tsc_64.c
+++ b/arch/x86/kernel/tsc_64.c
@@ -227,14 +227,14 @@ void __init tsc_calibrate(void)
         /* hpet or pmtimer available ? */
         if (!hpet && !pm1 && !pm2) {
                 printk(KERN_INFO "TSC calibrated against PIT\n");
-                return;
+                goto out;
         }
 
         /* Check, whether the sampling was disturbed by an SMI */
         if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) {
                 printk(KERN_WARNING "TSC calibration disturbed by SMI, "
                        "using PIT calibration result\n");
-                return;
+                goto out;
         }
 
         tsc2 = (tsc2 - tsc1) * 1000000L;
@@ -255,6 +255,7 @@ void __init tsc_calibrate(void)
 
         tsc_khz = tsc2 / tsc1;
 
+out:
         for_each_possible_cpu(cpu)
                 set_cyc2ns_scale(tsc_khz, cpu);
 }
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 58882f9f2637..f6c05d0410fb 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -2,6 +2,7 @@
    All C exports should go in the respective C files. */
 
 #include <linux/module.h>
+#include <net/checksum.h>
 #include <linux/smp.h>
 
 #include <asm/processor.h>
@@ -29,6 +30,8 @@ EXPORT_SYMBOL(__copy_from_user_inatomic);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
 
+EXPORT_SYMBOL(csum_partial);
+
 /*
  * Export string functions. We normally rely on gcc builtin for most of these,
  * but gcc sometimes decides not to inline them.
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 3324d90038e4..f2f5d260874e 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -200,7 +200,6 @@ int __pit_timer_fn(struct kvm_kpit_state *ps)
 
         atomic_inc(&pt->pending);
         smp_mb__after_atomic_inc();
-        /* FIXME: handle case where the guest is in guest mode */
         if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
                 vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
                 wake_up_interruptible(&vcpu0->wq);
@@ -216,7 +215,7 @@ int pit_has_pending_timer(struct kvm_vcpu *vcpu)
 {
         struct kvm_pit *pit = vcpu->kvm->arch.vpit;
 
-        if (pit && vcpu->vcpu_id == 0)
+        if (pit && vcpu->vcpu_id == 0 && pit->pit_state.inject_pending)
                 return atomic_read(&pit->pit_state.pit_timer.pending);
 
         return 0;
@@ -237,6 +236,19 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
                 return HRTIMER_NORESTART;
 }
 
+void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
+{
+        struct kvm_pit *pit = vcpu->kvm->arch.vpit;
+        struct hrtimer *timer;
+
+        if (vcpu->vcpu_id != 0 || !pit)
+                return;
+
+        timer = &pit->pit_state.pit_timer.timer;
+        if (hrtimer_cancel(timer))
+                hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+}
+
 static void destroy_pit_timer(struct kvm_kpit_timer *pt)
 {
         pr_debug("pit: execute del timer!\n");
diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
index ce1f583459b1..76d736b5f664 100644
--- a/arch/x86/kvm/irq.c
+++ b/arch/x86/kvm/irq.c
@@ -94,3 +94,9 @@ void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
         /* TODO: PIT, RTC etc. */
 }
 EXPORT_SYMBOL_GPL(kvm_timer_intr_post);
+
+void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
+{
+        __kvm_migrate_apic_timer(vcpu);
+        __kvm_migrate_pit_timer(vcpu);
+}
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 1802134b836f..2a15be2275c0 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -84,6 +84,8 @@ void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
 void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
 void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu);
 void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu);
+void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu);
+void __kvm_migrate_timers(struct kvm_vcpu *vcpu);
 
 int pit_has_pending_timer(struct kvm_vcpu *vcpu);
 int apic_has_pending_timer(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 36809d79788b..c297c50eba63 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -957,7 +957,7 @@ int apic_has_pending_timer(struct kvm_vcpu *vcpu)
 {
         struct kvm_lapic *lapic = vcpu->arch.apic;
 
-        if (lapic)
+        if (lapic && apic_enabled(lapic) && apic_lvt_enabled(lapic, APIC_LVTT))
                 return atomic_read(&lapic->timer.pending);
 
         return 0;
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 36c5406b1813..ee3f53098f0c 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -658,7 +658,7 @@ static int is_empty_shadow_page(u64 *spt)
         u64 *end;
 
         for (pos = spt, end = pos + PAGE_SIZE / sizeof(u64); pos != end; pos++)
-                if (*pos != shadow_trap_nonpresent_pte) {
+                if (is_shadow_present_pte(*pos)) {
                         printk(KERN_ERR "%s: %p %llx\n", __func__,
                                pos, *pos);
                         return 0;
@@ -1858,6 +1858,7 @@ static void free_mmu_pages(struct kvm_vcpu *vcpu)
                 sp = container_of(vcpu->kvm->arch.active_mmu_pages.next,
                                   struct kvm_mmu_page, link);
                 kvm_mmu_zap_page(vcpu->kvm, sp);
+                cond_resched();
         }
         free_page((unsigned long)vcpu->arch.mmu.pae_root);
 }
@@ -1996,7 +1997,7 @@ static struct shrinker mmu_shrinker = {
         .seeks = DEFAULT_SEEKS * 10,
 };
 
-void mmu_destroy_caches(void)
+static void mmu_destroy_caches(void)
 {
         if (pte_chain_cache)
                 kmem_cache_destroy(pte_chain_cache);
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 156fe10288ae..934c7b619396 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -418,7 +418,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 
         /* mmio */
         if (is_error_pfn(pfn)) {
-                pgprintk("gfn %x is mmio\n", walker.gfn);
+                pgprintk("gfn %lx is mmio\n", walker.gfn);
                 kvm_release_pfn_clean(pfn);
                 return 1;
         }
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index ab22615eee89..6b0d5fa5bab3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -688,7 +688,7 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
                 delta = vcpu->arch.host_tsc - tsc_this;
                 svm->vmcb->control.tsc_offset += delta;
                 vcpu->cpu = cpu;
-                kvm_migrate_apic_timer(vcpu);
+                kvm_migrate_timers(vcpu);
         }
 
         for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index bfe4db11989c..02efbe75f317 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -608,7 +608,7 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
         if (vcpu->cpu != cpu) {
                 vcpu_clear(vmx);
-                kvm_migrate_apic_timer(vcpu);
+                kvm_migrate_timers(vcpu);
                 vpid_sync_vcpu_all(vmx);
         }
 
@@ -1036,6 +1036,7 @@ static void hardware_enable(void *garbage)
 static void hardware_disable(void *garbage)
 {
         asm volatile (ASM_VMX_VMXOFF : : : "cc");
+        write_cr4(read_cr4() & ~X86_CR4_VMXE);
 }
 
 static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 21338bdb28ff..00acf1301a15 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2758,7 +2758,7 @@ again:
 
         if (vcpu->requests) {
                 if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests))
-                        __kvm_migrate_apic_timer(vcpu);
+                        __kvm_migrate_timers(vcpu);
                 if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS,
                                        &vcpu->requests)) {
                         kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS;
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index f2a696d6a243..932f216d890c 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -677,8 +677,9 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
         c->use_modrm_ea = 1;
 
         if (c->modrm_mod == 3) {
-                c->modrm_val = *(unsigned long *)
-                        decode_register(c->modrm_rm, c->regs, c->d & ByteOp);
+                c->modrm_ptr = decode_register(c->modrm_rm,
+                                               c->regs, c->d & ByteOp);
+                c->modrm_val = *(unsigned long *)c->modrm_ptr;
                 return rc;
         }
 
@@ -1005,6 +1006,7 @@ done_prefixes:
                 if ((c->d & ModRM) && c->modrm_mod == 3) {
                         c->src.type = OP_REG;
                         c->src.val = c->modrm_val;
+                        c->src.ptr = c->modrm_ptr;
                         break;
                 }
                 c->src.type = OP_MEM;
@@ -1049,6 +1051,7 @@ done_prefixes:
                 if ((c->d & ModRM) && c->modrm_mod == 3) {
                         c->dst.type = OP_REG;
                         c->dst.val = c->dst.orig_val = c->modrm_val;
+                        c->dst.ptr = c->modrm_ptr;
                         break;
                 }
                 c->dst.type = OP_MEM;
@@ -1724,7 +1727,8 @@ twobyte_insn:
                         if (rc)
                                 goto done;
 
-                        kvm_emulate_hypercall(ctxt->vcpu);
+                        /* Let the processor re-execute the fixed hypercall */
+                        c->eip = ctxt->vcpu->arch.rip;
                         /* Disable writeback. */
                         c->dst.type = OP_NONE;
                         break;
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index af65b2da3ba0..5c7e2fd52075 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -582,8 +582,9 @@ static void __init lguest_init_IRQ(void)
                 int vector = FIRST_EXTERNAL_VECTOR + i;
                 if (vector != SYSCALL_VECTOR) {
                         set_intr_gate(vector, interrupt[i]);
-                        set_irq_chip_and_handler(i, &lguest_irq_controller,
-                                                 handle_level_irq);
+                        set_irq_chip_and_handler_name(i, &lguest_irq_controller,
+                                                      handle_level_irq,
+                                                      "level");
                 }
         }
         /* This call is required to set up for 4k stacks, where we have
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 70bebd310408..ee1c3f635157 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -217,19 +217,19 @@ ENTRY(copy_user_generic_unrolled)
         /* table sorted by exception address */
         .section __ex_table,"a"
         .align 8
-        .quad .Ls1,.Ls1e
-        .quad .Ls2,.Ls2e
-        .quad .Ls3,.Ls3e
-        .quad .Ls4,.Ls4e
-        .quad .Ld1,.Ls1e
+        .quad .Ls1,.Ls1e        /* Ls1-Ls4 have copied zero bytes */
+        .quad .Ls2,.Ls1e
+        .quad .Ls3,.Ls1e
+        .quad .Ls4,.Ls1e
+        .quad .Ld1,.Ls1e        /* Ld1-Ld4 have copied 0-24 bytes */
         .quad .Ld2,.Ls2e
         .quad .Ld3,.Ls3e
         .quad .Ld4,.Ls4e
-        .quad .Ls5,.Ls5e
-        .quad .Ls6,.Ls6e
-        .quad .Ls7,.Ls7e
-        .quad .Ls8,.Ls8e
-        .quad .Ld5,.Ls5e
+        .quad .Ls5,.Ls5e        /* Ls5-Ls8 have copied 32 bytes */
+        .quad .Ls6,.Ls5e
+        .quad .Ls7,.Ls5e
+        .quad .Ls8,.Ls5e
+        .quad .Ld5,.Ls5e        /* Ld5-Ld8 have copied 32-56 bytes */
         .quad .Ld6,.Ls6e
         .quad .Ld7,.Ls7e
         .quad .Ld8,.Ls8e
@@ -244,11 +244,8 @@ ENTRY(copy_user_generic_unrolled)
         .quad .Le5,.Le_zero
         .previous
 
-        /* compute 64-offset for main loop. 8 bytes accuracy with error on the
-           pessimistic side. this is gross. it would be better to fix the
-           interface. */
         /* eax: zero, ebx: 64 */
-.Ls1e:  addl $8,%eax
+.Ls1e:  addl $8,%eax            /* eax is bytes left uncopied within the loop (Ls1e: 64 .. Ls8e: 8) */
 .Ls2e:  addl $8,%eax
 .Ls3e:  addl $8,%eax
 .Ls4e:  addl $8,%eax
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 5196762b3b0e..9d3d1ab83763 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -145,19 +145,19 @@ ENTRY(__copy_user_nocache)
         /* table sorted by exception address */
         .section __ex_table,"a"
         .align 8
-        .quad .Ls1,.Ls1e
-        .quad .Ls2,.Ls2e
-        .quad .Ls3,.Ls3e
-        .quad .Ls4,.Ls4e
-        .quad .Ld1,.Ls1e
+        .quad .Ls1,.Ls1e        /* .Ls[1-4] - 0 bytes copied */
+        .quad .Ls2,.Ls1e
+        .quad .Ls3,.Ls1e
+        .quad .Ls4,.Ls1e
+        .quad .Ld1,.Ls1e        /* .Ld[1-4] - 0..24 bytes coped */
         .quad .Ld2,.Ls2e
         .quad .Ld3,.Ls3e
         .quad .Ld4,.Ls4e
-        .quad .Ls5,.Ls5e
-        .quad .Ls6,.Ls6e
-        .quad .Ls7,.Ls7e
-        .quad .Ls8,.Ls8e
-        .quad .Ld5,.Ls5e
+        .quad .Ls5,.Ls5e        /* .Ls[5-8] - 32 bytes copied */
+        .quad .Ls6,.Ls5e
+        .quad .Ls7,.Ls5e
+        .quad .Ls8,.Ls5e
+        .quad .Ld5,.Ls5e        /* .Ld[5-8] - 32..56 bytes copied */
         .quad .Ld6,.Ls6e
         .quad .Ld7,.Ls7e
         .quad .Ld8,.Ls8e
@@ -172,11 +172,8 @@ ENTRY(__copy_user_nocache)
         .quad .Le5,.Le_zero
         .previous
 
-        /* compute 64-offset for main loop. 8 bytes accuracy with error on the
-           pessimistic side. this is gross. it would be better to fix the
-           interface. */
         /* eax: zero, ebx: 64 */
-.Ls1e:  addl $8,%eax
+.Ls1e:  addl $8,%eax    /* eax: bytes left uncopied: Ls1e: 64 .. Ls8e: 8 */
 .Ls2e:  addl $8,%eax
 .Ls3e:  addl $8,%eax
 .Ls4e:  addl $8,%eax
diff --git a/arch/x86/lib/csum-partial_64.c b/arch/x86/lib/csum-partial_64.c
index bc503f506903..bf51144d97e1 100644
--- a/arch/x86/lib/csum-partial_64.c
+++ b/arch/x86/lib/csum-partial_64.c
@@ -136,8 +136,6 @@ __wsum csum_partial(const void *buff, int len, __wsum sum)
                                                 (__force u32)sum);
 }
 
-EXPORT_SYMBOL(csum_partial);
-
 /*
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c
diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay_32.c
index 4535e6d147ad..d710f2d167bb 100644
--- a/arch/x86/lib/delay_32.c
+++ b/arch/x86/lib/delay_32.c
@@ -44,13 +44,36 @@ static void delay_loop(unsigned long loops)
 static void delay_tsc(unsigned long loops)
 {
         unsigned long bclock, now;
+        int cpu;
 
-        preempt_disable();              /* TSC's are per-cpu */
+        preempt_disable();
+        cpu = smp_processor_id();
         rdtscl(bclock);
-        do {
-                rep_nop();
+        for (;;) {
                 rdtscl(now);
-        } while ((now-bclock) < loops);
+                if ((now - bclock) >= loops)
+                        break;
+
+                /* Allow RT tasks to run */
+                preempt_enable();
+                rep_nop();
+                preempt_disable();
+
+                /*
+                 * It is possible that we moved to another CPU, and
+                 * since TSC's are per-cpu we need to calculate
+                 * that. The delay must guarantee that we wait "at
+                 * least" the amount of time. Being moved to another
+                 * CPU could make the wait longer but we just need to
+                 * make sure we waited long enough. Rebalance the
+                 * counter for this CPU.
+                 */
+                if (unlikely(cpu != smp_processor_id())) {
+                        loops -= (now - bclock);
+                        cpu = smp_processor_id();
+                        rdtscl(bclock);
+                }
+        }
         preempt_enable();
 }
 
diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c
index bbc610518516..4c441be92641 100644
--- a/arch/x86/lib/delay_64.c
+++ b/arch/x86/lib/delay_64.c
@@ -31,14 +31,36 @@ int __devinit read_current_timer(unsigned long *timer_value)
 void __delay(unsigned long loops)
 {
         unsigned bclock, now;
+        int cpu;
 
-        preempt_disable();              /* TSC's are pre-cpu */
+        preempt_disable();
+        cpu = smp_processor_id();
         rdtscl(bclock);
-        do {
-                rep_nop(); 
+        for (;;) {
                 rdtscl(now);
+                if ((now - bclock) >= loops)
+                        break;
+
+                /* Allow RT tasks to run */
+                preempt_enable();
+                rep_nop();
+                preempt_disable();
+
+                /*
+                 * It is possible that we moved to another CPU, and
+                 * since TSC's are per-cpu we need to calculate
+                 * that. The delay must guarantee that we wait "at
+                 * least" the amount of time. Being moved to another
+                 * CPU could make the wait longer but we just need to
+                 * make sure we waited long enough. Rebalance the
+                 * counter for this CPU.
+                 */
+                if (unlikely(cpu != smp_processor_id())) {
+                        loops -= (now - bclock);
+                        cpu = smp_processor_id();
+                        rdtscl(bclock);
+                }
         }
-        while ((now-bclock) < loops);
         preempt_enable();
 }
 EXPORT_SYMBOL(__delay);
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 6e38d877ea77..c7b06feb139b 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -30,6 +30,7 @@
 #include <asm/uaccess.h>
 #include <asm/desc.h>
 #include <asm/user.h>
+#include <asm/i387.h>
 
 #include "fpu_system.h"
 #include "fpu_emu.h"
@@ -146,6 +147,13 @@ asmlinkage void math_emulate(long arg)
         unsigned long code_limit = 0;   /* Initialized to stop compiler warnings */
         struct desc_struct code_descriptor;
 
+        if (!used_math()) {
+                if (init_fpu(current)) {
+                        do_group_exit(SIGKILL);
+                        return;
+                }
+        }
+
 #ifdef RE_ENTRANT_CHECKING
         if (emulating) {
                 printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
@@ -153,11 +161,6 @@ asmlinkage void math_emulate(long arg)
         RE_ENTRANT_CHECK_ON;
 #endif /* RE_ENTRANT_CHECKING */
 
-        if (!used_math()) {
-                finit();
-                set_used_math();
-        }
-
         SETUP_DATA_AREA(arg);
 
         FPU_ORIG_EIP = FPU_EIP;
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index fd7e1798c75a..8bcb6f40ccb6 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -497,6 +497,11 @@ static int vmalloc_fault(unsigned long address)
         unsigned long pgd_paddr;
         pmd_t *pmd_k;
         pte_t *pte_k;
+
+        /* Make sure we are in vmalloc area */
+        if (!(address >= VMALLOC_START && address < VMALLOC_END))
+                return -1;
+
         /*
          * Synchronize this task's top level page-table
          * with the 'reference' page table.
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index de236e419cb5..ec30d10154b6 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -438,8 +438,6 @@ void zap_low_mappings(void)
 {
         int i;
 
-        save_pg_dir();
-
         /*
          * Zap initial low-memory mappings.
          *
@@ -663,16 +661,8 @@ void __init mem_init(void)
                 test_wp_bit();
 
         cpa_init();
-
-        /*
-         * Subtle. SMP is doing it's boot stuff late (because it has to
-         * fork idle threads) - but it also needs low mappings for the
-         * protected-mode entry to work. We zap these entries only after
-         * the WP-bit has been tested.
-         */
-#ifndef CONFIG_SMP
+        save_pg_dir();
         zap_low_mappings();
-#endif
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 32ba13b0f818..156e6d7b0e32 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -206,7 +206,7 @@ void __init cleanup_highmap(void)
         pmd_t *last_pmd = pmd + PTRS_PER_PMD;
 
         for (; pmd < last_pmd; pmd++, vaddr += PMD_SIZE) {
-                if (!pmd_present(*pmd))
+                if (pmd_none(*pmd))
                         continue;
                 if (vaddr < (unsigned long) _text || vaddr > end)
                         set_pmd(pmd, __pmd(0));
@@ -506,7 +506,7 @@ early_param("memtest", parse_memtest);
 
 static void __init early_memtest(unsigned long start, unsigned long end)
 {
-        unsigned long t_start, t_size;
+        u64 t_start, t_size;
         unsigned pattern;
 
         if (!memtest_pattern)
@@ -525,7 +525,7 @@ static void __init early_memtest(unsigned long start, unsigned long end)
                         if (t_start + t_size > end)
                                 t_size = end - t_start;
 
-                        printk(KERN_CONT "\n  %016lx - %016lx pattern %d",
+                        printk(KERN_CONT "\n  %016llx - %016llx pattern %d",
                                 t_start, t_start + t_size, pattern);
 
                         memtest(t_start, t_size, pattern);
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 71bb3159031a..2b2bb3f9b683 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -593,10 +593,11 @@ void __init early_iounmap(void *addr, unsigned long size)
         unsigned long offset;
         unsigned int nrpages;
         enum fixed_addresses idx;
-        unsigned int nesting;
+        int nesting;
 
         nesting = --early_ioremap_nested;
-        WARN_ON(nesting < 0);
+        if (WARN_ON(nesting < 0))
+                return;
 
         if (early_ioremap_debug) {
                 printk(KERN_INFO "early_iounmap(%p, %08lx) [%d]\n", addr,
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 60adbe22efa0..06b7a1c90fb8 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -28,13 +28,13 @@
 #ifdef CONFIG_X86_PAT
 int __read_mostly pat_wc_enabled = 1;
 
-void __init pat_disable(char *reason)
+void __cpuinit pat_disable(char *reason)
 {
         pat_wc_enabled = 0;
         printk(KERN_INFO "%s\n", reason);
 }
 
-static int nopat(char *str)
+static int __init nopat(char *str)
 {
         pat_disable("PAT support disabled.");
         return 0;
@@ -151,32 +151,33 @@ static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot,
         unsigned long pat_type;
         u8 mtrr_type;
 
-        mtrr_type = mtrr_type_lookup(start, end);
-        if (mtrr_type == 0xFF) {                /* MTRR not enabled */
-                *ret_prot = prot;
-                return 0;
-        }
-        if (mtrr_type == 0xFE) {                /* MTRR match error */
-                *ret_prot = _PAGE_CACHE_UC;
-                return -1;
-        }
-        if (mtrr_type != MTRR_TYPE_UNCACHABLE &&
-            mtrr_type != MTRR_TYPE_WRBACK &&
-            mtrr_type != MTRR_TYPE_WRCOMB) {    /* MTRR type unhandled */
-                *ret_prot = _PAGE_CACHE_UC;
-                return -1;
-        }
-
         pat_type = prot & _PAGE_CACHE_MASK;
         prot &= (~_PAGE_CACHE_MASK);
 
-        /* Currently doing intersection by hand. Optimize it later. */
+        /*
+         * We return the PAT request directly for types where PAT takes
+         * precedence with respect to MTRR and for UC_MINUS.
+         * Consistency checks with other PAT requests is done later
+         * while going through memtype list.
+         */
         if (pat_type == _PAGE_CACHE_WC) {
                 *ret_prot = prot | _PAGE_CACHE_WC;
+                return 0;
         } else if (pat_type == _PAGE_CACHE_UC_MINUS) {
                 *ret_prot = prot | _PAGE_CACHE_UC_MINUS;
-        } else if (pat_type == _PAGE_CACHE_UC ||
-                   mtrr_type == MTRR_TYPE_UNCACHABLE) {
+                return 0;
+        } else if (pat_type == _PAGE_CACHE_UC) {
+                *ret_prot = prot | _PAGE_CACHE_UC;
+                return 0;
+        }
+
+        /*
+         * Look for MTRR hint to get the effective type in case where PAT
+         * request is for WB.
+         */
+        mtrr_type = mtrr_type_lookup(start, end);
+
+        if (mtrr_type == MTRR_TYPE_UNCACHABLE) {
                 *ret_prot = prot | _PAGE_CACHE_UC;
         } else if (mtrr_type == MTRR_TYPE_WRCOMB) {
                 *ret_prot = prot | _PAGE_CACHE_WC;
@@ -233,14 +234,12 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
         if (req_type == -1) {
                 /*
-                 * Special case where caller wants to inherit from mtrr or
-                 * existing pat mapping, defaulting to UC_MINUS in case of
-                 * no match.
+                 * Call mtrr_lookup to get the type hint. This is an
+                 * optimization for /dev/mem mmap'ers into WB memory (BIOS
+                 * tools and ACPI tools). Use WB request for WB memory and use
+                 * UC_MINUS otherwise.
                  */
                 u8 mtrr_type = mtrr_type_lookup(start, end);
-                if (mtrr_type == 0xFE) { /* MTRR match error */
-                        err = -1;
-                }
 
                 if (mtrr_type == MTRR_TYPE_WRBACK) {
                         req_type = _PAGE_CACHE_WB;
@@ -555,7 +554,7 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
                 "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
                         current->comm, current->pid,
                         cattr_name(flags),
-                        offset, offset + size);
+                        offset, (unsigned long long)(offset + size));
                 return 0;
         }
 
@@ -576,7 +575,7 @@ void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
                 "%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
                         current->comm, current->pid,
                         cattr_name(want_flags),
-                        addr, addr + size,
+                        addr, (unsigned long long)(addr + size),
                         cattr_name(flags));
         }
 }
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 3890234e5b26..99649dccad28 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -97,36 +97,9 @@ static __init inline int srat_disabled(void)
         return numa_off || acpi_numa < 0;
 }
 
-/*
- * A lot of BIOS fill in 10 (= no distance) everywhere. This messes
- * up the NUMA heuristics which wants the local node to have a smaller
- * distance than the others.
- * Do some quick checks here and only use the SLIT if it passes.
- */
-static __init int slit_valid(struct acpi_table_slit *slit)
-{
-        int i, j;
-        int d = slit->locality_count;
-        for (i = 0; i < d; i++) {
-                for (j = 0; j < d; j++)  {
-                        u8 val = slit->entry[d*i + j];
-                        if (i == j) {
-                                if (val != LOCAL_DISTANCE)
-                                        return 0;
-                        } else if (val <= LOCAL_DISTANCE)
-                                return 0;
-                }
-        }
-        return 1;
-}
-
 /* Callback for SLIT parsing */
 void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
 {
-        if (!slit_valid(slit)) {
-                printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n");
-                return;
-        }
         acpi_slit = slit;
 }
 
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 8545c8a9d107..940185ecaeda 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -302,18 +302,18 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
         },
         {
                 .callback = set_bf_sort,
-                .ident = "HP ProLiant DL385 G2",
+                .ident = "HP ProLiant DL360",
                 .matches = {
                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
-                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
                 },
         },
         {
                 .callback = set_bf_sort,
-                .ident = "HP ProLiant DL585 G2",
+                .ident = "HP ProLiant DL380",
                 .matches = {
                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
-                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
                 },
         },
 #ifdef __i386__
@@ -328,18 +328,18 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
 #endif
         {
                 .callback = set_bf_sort,
-                .ident = "HP ProLiant DL385 G2",
+                .ident = "HP ProLiant DL360",
                 .matches = {
                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
-                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
                 },
         },
         {
                 .callback = set_bf_sort,
-                .ident = "HP ProLiant DL585 G2",
+                .ident = "HP ProLiant DL380",
                 .matches = {
                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
-                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
                 },
         },
         {}
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 8af0f0bae2af..10fb308fded8 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -301,15 +301,13 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
         prot = pgprot_val(vma->vm_page_prot);
         if (pat_wc_enabled && write_combine)
                 prot |= _PAGE_CACHE_WC;
-        else if (pat_wc_enabled)
+        else if (pat_wc_enabled || boot_cpu_data.x86 > 3)
                 /*
                  * ioremap() and ioremap_nocache() defaults to UC MINUS for now.
                  * To avoid attribute conflicts, request UC MINUS here
                  * aswell.
                  */
                 prot |= _PAGE_CACHE_UC_MINUS;
-        else if (boot_cpu_data.x86 > 3)
-                prot |= _PAGE_CACHE_UC;
 
         vma->vm_page_prot = __pgprot(prot);
 
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index e70b9c57b88e..b821f4462d99 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -15,7 +15,8 @@ static __init int pci_access_init(void)
         pci_mmcfg_early_init();
 
 #ifdef CONFIG_PCI_OLPC
-        pci_olpc_init();
+        if (!pci_olpc_init())
+                return 0;       /* skip additional checks if it's an XO */
 #endif
 #ifdef CONFIG_PCI_BIOS
         pci_pcbios_init();
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 0908fca901bf..ca8df9c260bc 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -621,6 +621,13 @@ static __init int via_router_probe(struct irq_router *r,
                          */
                         device = PCI_DEVICE_ID_VIA_8235;
                         break;
+                case PCI_DEVICE_ID_VIA_8237:
+                        /**
+                         * Asus a7v600 bios wrongly reports 8237
+                         * as 586-compatible
+                         */
+                        device = PCI_DEVICE_ID_VIA_8237;
+                        break;
                 }
         }
 
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index 5e7636558c02..e11e9e803d5f 100644
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -302,12 +302,13 @@ static struct pci_raw_ops pci_olpc_conf = {
         .write = pci_olpc_write,
 };
 
-void __init pci_olpc_init(void)
+int __init pci_olpc_init(void)
 {
         if (!machine_is_olpc() || olpc_has_vsa())
-                return;
+                return -ENODEV;
 
         printk(KERN_INFO "PCI: Using configuration type OLPC\n");
         raw_pci_ops = &pci_olpc_conf;
         is_lx = is_geode_lx();
+        return 0;
 }
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index f3972b12c60a..720c4c554534 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -101,7 +101,7 @@ extern struct pci_raw_ops pci_direct_conf1;
 extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
-extern void pci_olpc_init(void);
+extern int pci_olpc_init(void);
 
 /* pci-mmconfig.c */
 
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index 23476c2ebfc4..efa2ba7c6005 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -106,9 +106,9 @@ int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
                 do_realtime((struct timespec *)tv);
                 tv->tv_usec /= 1000;
                 if (unlikely(tz != NULL)) {
-                        /* This relies on gcc inlining the memcpy. We'll notice
-                           if it ever fails to do so. */
-                        memcpy(tz, &gtod->sys_tz, sizeof(struct timezone));
+                        /* Avoid memcpy. Some old compilers fail to inline it */
+                        tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest;
+                        tz->tz_dsttime = gtod->sys_tz.tz_dsttime;
                 }
                 return 0;
         }
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 126766d43aea..3525ef523a74 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -60,7 +60,7 @@ xmaddr_t arbitrary_virt_to_machine(unsigned long address)
 {
         unsigned int level;
         pte_t *pte = lookup_address(address, &level);
-        unsigned offset = address & PAGE_MASK;
+        unsigned offset = address & ~PAGE_MASK;
 
         BUG_ON(pte == NULL);
 
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index c39e1a5aa241..52b2e3856980 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -12,6 +12,7 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/kernel_stat.h>
+#include <linux/math64.h>
 
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
@@ -150,11 +151,7 @@ static void do_stolen_accounting(void)
         if (stolen < 0)
                 stolen = 0;
 
-        ticks = 0;
-        while (stolen >= NS_PER_TICK) {
-                ticks++;
-                stolen -= NS_PER_TICK;
-        }
+        ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen);
         __get_cpu_var(residual_stolen) = stolen;
         account_steal_time(NULL, ticks);
 
@@ -166,11 +163,7 @@ static void do_stolen_accounting(void)
         if (blocked < 0)
                 blocked = 0;
 
-        ticks = 0;
-        while (blocked >= NS_PER_TICK) {
-                ticks++;
-                blocked -= NS_PER_TICK;
-        }
+        ticks = iter_div_u64_rem(blocked, NS_PER_TICK, &blocked);
         __get_cpu_var(residual_blocked) = blocked;
         account_steal_time(idle_task(smp_processor_id()), ticks);
 }
diff --git a/arch/xtensa/kernel/init_task.c b/arch/xtensa/kernel/init_task.c
index 021b4f46ff94..3df469dbe814 100644
--- a/arch/xtensa/kernel/init_task.c
+++ b/arch/xtensa/kernel/init_task.c
@@ -22,7 +22,6 @@
 #include <asm/uaccess.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);