powerpc: Merge 32-bit CHRP support.

SMP still needs more work but UP gets as far as starting userspace
at least.  This uses the 64-bit-style code for spinning up the cpus.

Signed-off-by: Paul Mackerras <paulus@samba.org>

12 files changed, 1256 insertions, 37 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 964ded4a757f..9589d621edc5 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -339,7 +339,7 @@ config U3_DART
         default n
 
 config MPIC
-        depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE
+        depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP
         bool
         default y
 
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index cd51fe585fcd..f8673f7b2b2d 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -207,7 +207,7 @@ turn_on_mmu:
         .globl  __secondary_hold
 __secondary_hold:
         /* tell the master we're here */
-        stw     r3,4(0)
+        stw     r3,__secondary_hold_acknowledge@l(0)
 #ifdef CONFIG_SMP
 100:    lwz     r4,0(0)
         /* wait until we're told to start */
@@ -220,6 +220,13 @@ __secondary_hold:
         b       .
 #endif /* CONFIG_SMP */
 
+        .globl  __secondary_hold_spinloop
+__secondary_hold_spinloop:
+        .long   0
+        .globl  __secondary_hold_acknowledge
+__secondary_hold_acknowledge:
+        .long   -1
+
 /*
  * Exception entry code.  This code runs with address translation
  * turned off, i.e. using physical addresses.
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 18d266d8935d..debe9734636e 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1155,9 +1155,18 @@ static void __init prom_initialize_tce_table(void)
  *
  * -- Cort
  */
+extern void __secondary_hold(void);
+extern unsigned long __secondary_hold_spinloop;
+extern unsigned long __secondary_hold_acknowledge;
+
+/*
+ * We want to reference the copy of __secondary_hold_* in the
+ * 0 - 0x100 address range
+ */
+#define LOW_ADDR(x)     (((unsigned long) &(x)) & 0xff)
+
 static void __init prom_hold_cpus(void)
 {
-#ifdef CONFIG_PPC64
         unsigned long i;
         unsigned int reg;
         phandle node;
@@ -1166,20 +1175,18 @@ static void __init prom_hold_cpus(void)
         unsigned int interrupt_server[MAX_CPU_THREADS];
         unsigned int cpu_threads, hw_cpu_num;
         int propsize;
-        extern void __secondary_hold(void);
-        extern unsigned long __secondary_hold_spinloop;
-        extern unsigned long __secondary_hold_acknowledge;
+        struct prom_t *_prom = &RELOC(prom);
         unsigned long *spinloop
-                = (void *) __pa(&__secondary_hold_spinloop);
+                = (void *) LOW_ADDR(__secondary_hold_spinloop);
         unsigned long *acknowledge
-                = (void *) __pa(&__secondary_hold_acknowledge);
+                = (void *) LOW_ADDR(__secondary_hold_acknowledge);
 #ifdef CONFIG_PPC64
+        /* __secondary_hold is actually a descriptor, not the text address */
         unsigned long secondary_hold
                 = __pa(*PTRRELOC((unsigned long *)__secondary_hold));
 #else
-        unsigned long secondary_hold = __pa(&__secondary_hold);
+        unsigned long secondary_hold = LOW_ADDR(__secondary_hold);
 #endif
-        struct prom_t *_prom = &RELOC(prom);
 
         prom_debug("prom_hold_cpus: start...\n");
         prom_debug("    1) spinloop       = 0x%x\n", (unsigned long)spinloop);
@@ -1197,9 +1204,8 @@ static void __init prom_hold_cpus(void)
         *spinloop = 0;
 
 #ifdef CONFIG_HMT
-        for (i = 0; i < NR_CPUS; i++) {
+        for (i = 0; i < NR_CPUS; i++)
                 RELOC(hmt_thread_data)[i].pir = 0xdeadbeef;
-        }
 #endif
         /* look for cpus */
         for (node = 0; prom_next_node(&node); ) {
@@ -1250,34 +1256,22 @@ static void __init prom_hold_cpus(void)
                         call_prom("start-cpu", 3, 0, node,
                                   secondary_hold, reg);
 
-                        for ( i = 0 ; (i < 100000000) && 
-                              (*acknowledge == ((unsigned long)-1)); i++ )
+                        for (i = 0; (i < 100000000) && 
+                             (*acknowledge == ((unsigned long)-1)); i++ )
                                 mb();
 
-                        if (*acknowledge == reg) {
+                        if (*acknowledge == reg)
                                 prom_printf("done\n");
-                                /* We have to get every CPU out of OF,
-                                 * even if we never start it. */
-                                if (cpuid >= NR_CPUS)
-                                        goto next;
-                        } else {
+                        else
                                 prom_printf("failed: %x\n", *acknowledge);
-                        }
                 }
 #ifdef CONFIG_SMP
                 else
                         prom_printf("%x : boot cpu     %x\n", cpuid, reg);
-#endif
-next:
-#ifdef CONFIG_SMP
-                /* Init paca for secondary threads.   They start later. */
-                for (i=1; i < cpu_threads; i++) {
-                        cpuid++;
-                        if (cpuid >= NR_CPUS)
-                                continue;
-                }
 #endif /* CONFIG_SMP */
-                cpuid++;
+
+                /* Reserve cpu #s for secondary threads.   They start later. */
+                cpuid += cpu_threads;
         }
 #ifdef CONFIG_HMT
         /* Only enable HMT on processors that provide support. */
@@ -1311,7 +1305,6 @@ next:
                             ") exceeded: ignoring extras\n");
 
         prom_debug("prom_hold_cpus: end...\n");
-#endif
 }
 
 
@@ -1940,7 +1933,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
                                unsigned long r6, unsigned long r7)
 {       
         struct prom_t *_prom;
-        extern char _stext[];
         unsigned long hdr;
         u32 getprop_rval;
         unsigned long offset = reloc_offset();
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 295d5c77f020..0cac112ca89d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -56,6 +56,10 @@ extern void power4_idle(void);
 boot_infos_t *boot_infos;
 struct ide_machdep_calls ppc_ide_md;
 
+/* XXX should go elsewhere */
+int __irq_offset_value;
+EXPORT_SYMBOL(__irq_offset_value);
+
 /* Used with the BI_MEMSIZE bootinfo parameter to store the memory
    size value reported by the boot loader. */
 unsigned long boot_mem_size;
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 509622da5408..01723d491b5d 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -5,6 +5,7 @@ ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_PPC_PMAC)          += powermac/
 endif
 endif
+obj-$(CONFIG_PPC_CHRP)          += chrp/
 obj-$(CONFIG_4xx)               += 4xx/
 obj-$(CONFIG_85xx)              += 85xx/
 obj-$(CONFIG_PPC_PSERIES)       += pseries/
diff --git a/arch/powerpc/platforms/chrp/Makefile b/arch/powerpc/platforms/chrp/Makefile
new file mode 100644
index 000000000000..1fde4e68414f
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/Makefile
@@ -0,0 +1,3 @@
+obj-y                           += setup.o time.o pegasos_eth.o
+obj-$(CONFIG_PCI)               += pci.o
+obj-$(CONFIG_SMP)               += smp.o
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
new file mode 100644
index 000000000000..82c429d487f3
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -0,0 +1,310 @@
+/*
+ * CHRP pci routines.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/hydra.h>
+#include <asm/prom.h>
+#include <asm/gg2.h>
+#include <asm/machdep.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+#include <asm/grackle.h>
+#include <asm/rtas.h>
+
+/* LongTrail */
+void __iomem *gg2_pci_config_base;
+
+/*
+ * The VLSI Golden Gate II has only 512K of PCI configuration space, so we
+ * limit the bus number to 3 bits
+ */
+
+int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
+                           int len, u32 *val)
+{
+        volatile void __iomem *cfg_data;
+        struct pci_controller *hose = bus->sysdata;
+
+        if (bus->number > 7)
+                return PCIBIOS_DEVICE_NOT_FOUND;
+        /*
+         * Note: the caller has already checked that off is
+         * suitably aligned and that len is 1, 2 or 4.
+         */
+        cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
+        switch (len) {
+        case 1:
+                *val =  in_8(cfg_data);
+                break;
+        case 2:
+                *val = in_le16(cfg_data);
+                break;
+        default:
+                *val = in_le32(cfg_data);
+                break;
+        }
+        return PCIBIOS_SUCCESSFUL;
+}
+
+int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
+                            int len, u32 val)
+{
+        volatile void __iomem *cfg_data;
+        struct pci_controller *hose = bus->sysdata;
+
+        if (bus->number > 7)
+                return PCIBIOS_DEVICE_NOT_FOUND;
+        /*
+         * Note: the caller has already checked that off is
+         * suitably aligned and that len is 1, 2 or 4.
+         */
+        cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
+        switch (len) {
+        case 1:
+                out_8(cfg_data, val);
+                break;
+        case 2:
+                out_le16(cfg_data, val);
+                break;
+        default:
+                out_le32(cfg_data, val);
+                break;
+        }
+        return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops gg2_pci_ops =
+{
+        gg2_read_config,
+        gg2_write_config
+};
+
+/*
+ * Access functions for PCI config space using RTAS calls.
+ */
+int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+                     int len, u32 *val)
+{
+        struct pci_controller *hose = bus->sysdata;
+        unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+                | (((bus->number - hose->first_busno) & 0xff) << 16)
+                | (hose->index << 24);
+        int ret = -1;
+        int rval;
+
+        rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
+        *val = ret;
+        return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
+}
+
+int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+                      int len, u32 val)
+{
+        struct pci_controller *hose = bus->sysdata;
+        unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+                | (((bus->number - hose->first_busno) & 0xff) << 16)
+                | (hose->index << 24);
+        int rval;
+
+        rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
+                         addr, len, val);
+        return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rtas_pci_ops =
+{
+        rtas_read_config,
+        rtas_write_config
+};
+
+volatile struct Hydra __iomem *Hydra = NULL;
+
+int __init
+hydra_init(void)
+{
+        struct device_node *np;
+
+        np = find_devices("mac-io");
+        if (np == NULL || np->n_addrs == 0)
+                return 0;
+        Hydra = ioremap(np->addrs[0].address, np->addrs[0].size);
+        printk("Hydra Mac I/O at %lx\n", np->addrs[0].address);
+        printk("Hydra Feature_Control was %x",
+               in_le32(&Hydra->Feature_Control));
+        out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN |
+                                           HYDRA_FC_SCSI_CELL_EN |
+                                           HYDRA_FC_SCCA_ENABLE |
+                                           HYDRA_FC_SCCB_ENABLE |
+                                           HYDRA_FC_ARB_BYPASS |
+                                           HYDRA_FC_MPIC_ENABLE |
+                                           HYDRA_FC_SLOW_SCC_PCLK |
+                                           HYDRA_FC_MPIC_IS_MASTER));
+        printk(", now %x\n", in_le32(&Hydra->Feature_Control));
+        return 1;
+}
+
+void __init
+chrp_pcibios_fixup(void)
+{
+        struct pci_dev *dev = NULL;
+        struct device_node *np;
+
+        /* PCI interrupts are controlled by the OpenPIC */
+        for_each_pci_dev(dev) {
+                np = pci_device_to_OF_node(dev);
+                if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0))
+                        dev->irq = np->intrs[0].line;
+                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+        }
+}
+
+#define PRG_CL_RESET_VALID 0x00010000
+
+static void __init
+setup_python(struct pci_controller *hose, struct device_node *dev)
+{
+        u32 __iomem *reg;
+        u32 val;
+        unsigned long addr = dev->addrs[0].address;
+
+        setup_indirect_pci(hose, addr + 0xf8000, addr + 0xf8010);
+
+        /* Clear the magic go-slow bit */
+        reg = ioremap(dev->addrs[0].address + 0xf6000, 0x40);
+        val = in_be32(&reg[12]);
+        if (val & PRG_CL_RESET_VALID) {
+                out_be32(&reg[12], val & ~PRG_CL_RESET_VALID);
+                in_be32(&reg[12]);
+        }
+        iounmap(reg);
+}
+
+/* Marvell Discovery II based Pegasos 2 */
+static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev)
+{
+        struct device_node *root = find_path_device("/");
+        struct device_node *rtas;
+
+        rtas = of_find_node_by_name (root, "rtas");
+        if (rtas) {
+                hose->ops = &rtas_pci_ops;
+        } else {
+                printk ("RTAS supporting Pegasos OF not found, please upgrade"
+                        " your firmware\n");
+        }
+        pci_assign_all_buses = 1;
+}
+
+void __init
+chrp_find_bridges(void)
+{
+        struct device_node *dev;
+        int *bus_range;
+        int len, index = -1;
+        struct pci_controller *hose;
+        unsigned int *dma;
+        char *model, *machine;
+        int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
+        struct device_node *root = find_path_device("/");
+
+        /*
+         * The PCI host bridge nodes on some machines don't have
+         * properties to adequately identify them, so we have to
+         * look at what sort of machine this is as well.
+         */
+        machine = get_property(root, "model", NULL);
+        if (machine != NULL) {
+                is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
+                is_mot = strncmp(machine, "MOT", 3) == 0;
+                if (strncmp(machine, "Pegasos2", 8) == 0)
+                        is_pegasos = 2;
+                else if (strncmp(machine, "Pegasos", 7) == 0)
+                        is_pegasos = 1;
+        }
+        for (dev = root->child; dev != NULL; dev = dev->sibling) {
+                if (dev->type == NULL || strcmp(dev->type, "pci") != 0)
+                        continue;
+                ++index;
+                /* The GG2 bridge on the LongTrail doesn't have an address */
+                if (dev->n_addrs < 1 && !is_longtrail) {
+                        printk(KERN_WARNING "Can't use %s: no address\n",
+                               dev->full_name);
+                        continue;
+                }
+                bus_range = (int *) get_property(dev, "bus-range", &len);
+                if (bus_range == NULL || len < 2 * sizeof(int)) {
+                        printk(KERN_WARNING "Can't get bus-range for %s\n",
+                                dev->full_name);
+                        continue;
+                }
+                if (bus_range[1] == bus_range[0])
+                        printk(KERN_INFO "PCI bus %d", bus_range[0]);
+                else
+                        printk(KERN_INFO "PCI buses %d..%d",
+                               bus_range[0], bus_range[1]);
+                printk(" controlled by %s", dev->type);
+                if (dev->n_addrs > 0)
+                        printk(" at %lx", dev->addrs[0].address);
+                printk("\n");
+
+                hose = pcibios_alloc_controller();
+                if (!hose) {
+                        printk("Can't allocate PCI controller structure for %s\n",
+                                dev->full_name);
+                        continue;
+                }
+                hose->arch_data = dev;
+                hose->first_busno = bus_range[0];
+                hose->last_busno = bus_range[1];
+
+                model = get_property(dev, "model", NULL);
+                if (model == NULL)
+                        model = "<none>";
+                if (device_is_compatible(dev, "IBM,python")) {
+                        setup_python(hose, dev);
+                } else if (is_mot
+                           || strncmp(model, "Motorola, Grackle", 17) == 0) {
+                        setup_grackle(hose);
+                } else if (is_longtrail) {
+                        void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000);
+                        hose->ops = &gg2_pci_ops;
+                        hose->cfg_data = p;
+                        gg2_pci_config_base = p;
+                } else if (is_pegasos == 1) {
+                        setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc);
+                } else if (is_pegasos == 2) {
+                        setup_peg2(hose, dev);
+                } else {
+                        printk("No methods for %s (model %s), using RTAS\n",
+                               dev->full_name, model);
+                        hose->ops = &rtas_pci_ops;
+                }
+
+                pci_process_bridge_OF_ranges(hose, dev, index == 0);
+
+                /* check the first bridge for a property that we can
+                   use to set pci_dram_offset */
+                dma = (unsigned int *)
+                        get_property(dev, "ibm,dma-ranges", &len);
+                if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
+                        pci_dram_offset = dma[2] - dma[3];
+                        printk("pci_dram_offset = %lx\n", pci_dram_offset);
+                }
+        }
+
+        /* Do not fixup interrupts from OF tree on pegasos */
+        if (is_pegasos == 0)
+                ppc_md.pcibios_fixup = chrp_pcibios_fixup;
+}
diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c
new file mode 100644
index 000000000000..cad5bfa153b2
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/pegasos_eth.c
@@ -0,0 +1,101 @@
+/*
+ *  arch/ppc/platforms/chrp_pegasos_eth.c
+ *
+ *  Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de>
+ *  Thanks to :
+ *      Dale Farnsworth <dale@farnsworth.org>
+ *      Mark A. Greer <mgreer@mvista.com>
+ *      Nicolas DET <nd@bplan-gmbh.de>
+ *      Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *  And anyone else who helped me on this.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/mv643xx.h>
+#include <linux/pci.h>
+
+/* Pegasos 2 specific Marvell MV 64361 gigabit ethernet port setup */
+static struct resource mv643xx_eth_shared_resources[] = {
+        [0] = {
+                .name   = "ethernet shared base",
+                .start  = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
+                .end    = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
+                                        MV643XX_ETH_SHARED_REGS_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device mv643xx_eth_shared_device = {
+        .name           = MV643XX_ETH_SHARED_NAME,
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(mv643xx_eth_shared_resources),
+        .resource       = mv643xx_eth_shared_resources,
+};
+
+static struct resource mv643xx_eth0_resources[] = {
+        [0] = {
+                .name   = "eth0 irq",
+                .start  = 9,
+                .end    = 9,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct mv643xx_eth_platform_data eth0_pd;
+
+static struct platform_device eth0_device = {
+        .name           = MV643XX_ETH_NAME,
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(mv643xx_eth0_resources),
+        .resource       = mv643xx_eth0_resources,
+        .dev = {
+                .platform_data = &eth0_pd,
+        },
+};
+
+static struct resource mv643xx_eth1_resources[] = {
+        [0] = {
+                .name   = "eth1 irq",
+                .start  = 9,
+                .end    = 9,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct mv643xx_eth_platform_data eth1_pd;
+
+static struct platform_device eth1_device = {
+        .name           = MV643XX_ETH_NAME,
+        .id             = 1,
+        .num_resources  = ARRAY_SIZE(mv643xx_eth1_resources),
+        .resource       = mv643xx_eth1_resources,
+        .dev = {
+                .platform_data = &eth1_pd,
+        },
+};
+
+static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
+        &mv643xx_eth_shared_device,
+        &eth0_device,
+        &eth1_device,
+};
+
+
+int
+mv643xx_eth_add_pds(void)
+{
+        int ret = 0;
+        static struct pci_device_id pci_marvell_mv64360[] = {
+                { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) },
+                { }
+        };
+
+        if (pci_dev_present(pci_marvell_mv64360)) {
+                ret = platform_add_devices(mv643xx_eth_pd_devs, ARRAY_SIZE(mv643xx_eth_pd_devs));
+        }
+        return ret;
+}
+device_initcall(mv643xx_eth_add_pds);
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
new file mode 100644
index 000000000000..5145990e6a01
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -0,0 +1,523 @@
+/*
+ *  arch/ppc/platforms/setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Adapted from 'alpha' version by Gary Thomas
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/version.h>
+#include <linux/adb.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/console.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/gg2.h>
+#include <asm/pci-bridge.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/hydra.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+#include <asm/btext.h>
+#include <asm/i8259.h>
+#include <asm/mpic.h>
+#include <asm/rtas.h>
+#include <asm/xmon.h>
+
+void chrp_get_rtc_time(struct rtc_time *);
+int chrp_set_rtc_time(struct rtc_time *);
+void chrp_calibrate_decr(void);
+long chrp_time_init(void);
+
+void chrp_find_bridges(void);
+void chrp_event_scan(void);
+void rtas_indicator_progress(char *, unsigned short);
+void btext_progress(char *, unsigned short);
+
+int _chrp_type;
+EXPORT_SYMBOL(_chrp_type);
+
+struct mpic *chrp_mpic;
+
+/*
+ * XXX this should be in xmon.h, but putting it there means xmon.h
+ * has to include <linux/interrupt.h> (to get irqreturn_t), which
+ * causes all sorts of problems.  -- paulus
+ */
+extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+
+extern unsigned long loops_per_jiffy;
+
+#ifdef CONFIG_SMP
+extern struct smp_ops_t chrp_smp_ops;
+#endif
+
+static const char *gg2_memtypes[4] = {
+        "FPM", "SDRAM", "EDO", "BEDO"
+};
+static const char *gg2_cachesizes[4] = {
+        "256 KB", "512 KB", "1 MB", "Reserved"
+};
+static const char *gg2_cachetypes[4] = {
+        "Asynchronous", "Reserved", "Flow-Through Synchronous",
+        "Pipelined Synchronous"
+};
+static const char *gg2_cachemodes[4] = {
+        "Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
+};
+
+void chrp_show_cpuinfo(struct seq_file *m)
+{
+        int i, sdramen;
+        unsigned int t;
+        struct device_node *root;
+        const char *model = "";
+
+        root = find_path_device("/");
+        if (root)
+                model = get_property(root, "model", NULL);
+        seq_printf(m, "machine\t\t: CHRP %s\n", model);
+
+        /* longtrail (goldengate) stuff */
+        if (!strncmp(model, "IBM,LongTrail", 13)) {
+                /* VLSI VAS96011/12 `Golden Gate 2' */
+                /* Memory banks */
+                sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
+                           >>31) & 1;
+                for (i = 0; i < (sdramen ? 4 : 6); i++) {
+                        t = in_le32(gg2_pci_config_base+
+                                                 GG2_PCI_DRAM_BANK0+
+                                                 i*4);
+                        if (!(t & 1))
+                                continue;
+                        switch ((t>>8) & 0x1f) {
+                        case 0x1f:
+                                model = "4 MB";
+                                break;
+                        case 0x1e:
+                                model = "8 MB";
+                                break;
+                        case 0x1c:
+                                model = "16 MB";
+                                break;
+                        case 0x18:
+                                model = "32 MB";
+                                break;
+                        case 0x10:
+                                model = "64 MB";
+                                break;
+                        case 0x00:
+                                model = "128 MB";
+                                break;
+                        default:
+                                model = "Reserved";
+                                break;
+                        }
+                        seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
+                                   gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
+                }
+                /* L2 cache */
+                t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
+                seq_printf(m, "board l2\t: %s %s (%s)\n",
+                           gg2_cachesizes[(t>>7) & 3],
+                           gg2_cachetypes[(t>>2) & 3],
+                           gg2_cachemodes[t & 3]);
+        }
+}
+
+/*
+ *  Fixes for the National Semiconductor PC78308VUL SuperI/O
+ *
+ *  Some versions of Open Firmware incorrectly initialize the IRQ settings
+ *  for keyboard and mouse
+ */
+static inline void __init sio_write(u8 val, u8 index)
+{
+        outb(index, 0x15c);
+        outb(val, 0x15d);
+}
+
+static inline u8 __init sio_read(u8 index)
+{
+        outb(index, 0x15c);
+        return inb(0x15d);
+}
+
+static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
+                                     u8 type)
+{
+        u8 level0, type0, active;
+
+        /* select logical device */
+        sio_write(device, 0x07);
+        active = sio_read(0x30);
+        level0 = sio_read(0x70);
+        type0 = sio_read(0x71);
+        if (level0 != level || type0 != type || !active) {
+                printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
+                       "remapping to level %d, type %d, active\n",
+                       name, level0, type0, !active ? "in" : "", level, type);
+                sio_write(0x01, 0x30);
+                sio_write(level, 0x70);
+                sio_write(type, 0x71);
+        }
+}
+
+static void __init sio_init(void)
+{
+        struct device_node *root;
+
+        if ((root = find_path_device("/")) &&
+            !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) {
+                /* logical device 0 (KBC/Keyboard) */
+                sio_fixup_irq("keyboard", 0, 1, 2);
+                /* select logical device 1 (KBC/Mouse) */
+                sio_fixup_irq("mouse", 1, 12, 2);
+        }
+}
+
+
+static void __init pegasos_set_l2cr(void)
+{
+        struct device_node *np;
+
+        /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
+        if (_chrp_type != _CHRP_Pegasos)
+                return;
+
+        /* Enable L2 cache if needed */
+        np = find_type_devices("cpu");
+        if (np != NULL) {
+                unsigned int *l2cr = (unsigned int *)
+                        get_property (np, "l2cr", NULL);
+                if (l2cr == NULL) {
+                        printk ("Pegasos l2cr : no cpu l2cr property found\n");
+                        return;
+                }
+                if (!((*l2cr) & 0x80000000)) {
+                        printk ("Pegasos l2cr : L2 cache was not active, "
+                                "activating\n");
+                        _set_L2CR(0);
+                        _set_L2CR((*l2cr) | 0x80000000);
+                }
+        }
+}
+
+void __init chrp_setup_arch(void)
+{
+        struct device_node *root = find_path_device ("/");
+        char *machine = NULL;
+        struct device_node *device;
+        unsigned int *p = NULL;
+
+        /* init to some ~sane value until calibrate_delay() runs */
+        loops_per_jiffy = 50000000/HZ;
+
+        if (root)
+                machine = get_property(root, "model", NULL);
+        if (machine && strncmp(machine, "Pegasos", 7) == 0) {
+                _chrp_type = _CHRP_Pegasos;
+        } else if (machine && strncmp(machine, "IBM", 3) == 0) {
+                _chrp_type = _CHRP_IBM;
+        } else if (machine && strncmp(machine, "MOT", 3) == 0) {
+                _chrp_type = _CHRP_Motorola;
+        } else {
+                /* Let's assume it is an IBM chrp if all else fails */
+                _chrp_type = _CHRP_IBM;
+        }
+        printk("chrp type = %x\n", _chrp_type);
+
+        rtas_initialize();
+        if (rtas_token("display-character") >= 0)
+                ppc_md.progress = rtas_progress;
+
+#ifdef CONFIG_BOOTX_TEXT
+        if (ppc_md.progress == NULL && boot_text_mapped)
+                ppc_md.progress = btext_progress;
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+        /* this is fine for chrp */
+        initrd_below_start_ok = 1;
+
+        if (initrd_start)
+                ROOT_DEV = Root_RAM0;
+        else
+#endif
+                ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
+
+        /* On pegasos, enable the L2 cache if not already done by OF */
+        pegasos_set_l2cr();
+
+        /* Lookup PCI host bridges */
+        chrp_find_bridges();
+
+        /*
+         *  Temporary fixes for PCI devices.
+         *  -- Geert
+         */
+        hydra_init();           /* Mac I/O */
+
+        /*
+         *  Fix the Super I/O configuration
+         */
+        sio_init();
+
+        /* Get the event scan rate for the rtas so we know how
+         * often it expects a heartbeat. -- Cort
+         */
+        device = find_devices("rtas");
+        if (device)
+                p = (unsigned int *) get_property
+                        (device, "rtas-event-scan-rate", NULL);
+        if (p && *p) {
+                ppc_md.heartbeat = chrp_event_scan;
+                ppc_md.heartbeat_reset = HZ / (*p * 30) - 1;
+                ppc_md.heartbeat_count = 1;
+                printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
+                       *p, ppc_md.heartbeat_reset);
+        }
+
+        pci_create_OF_bus_map();
+
+        /*
+         * Print the banner, then scroll down so boot progress
+         * can be printed.  -- Cort
+         */
+        if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
+}
+
+void
+chrp_event_scan(void)
+{
+        unsigned char log[1024];
+        int ret = 0;
+
+        /* XXX: we should loop until the hardware says no more error logs -- Cort */
+        rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
+                  __pa(log), 1024);
+        ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
+}
+
+/*
+ * Finds the open-pic node and sets up the mpic driver.
+ */
+static void __init chrp_find_openpic(void)
+{
+        struct device_node *np, *root;
+        int len, i, j, irq_count;
+        int isu_size, idu_size;
+        unsigned int *iranges, *opprop = NULL;
+        int oplen = 0;
+        unsigned long opaddr;
+        int na = 1;
+        unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
+
+        np = find_type_devices("open-pic");
+        if (np == NULL)
+                return;
+        root = find_path_device("/");
+        if (root) {
+                opprop = (unsigned int *) get_property
+                        (root, "platform-open-pic", &oplen);
+                na = prom_n_addr_cells(root);
+        }
+        if (opprop && oplen >= na * sizeof(unsigned int)) {
+                opaddr = opprop[na-1];  /* assume 32-bit */
+                oplen /= na * sizeof(unsigned int);
+        } else {
+                if (np->n_addrs == 0)
+                        return;
+                opaddr = np->addrs[0].address;
+                oplen = 0;
+        }
+
+        printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
+
+        irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
+        prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS - 4);
+
+        iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
+        if (iranges == NULL)
+                len = 0;        /* non-distributed mpic */
+        else
+                len /= 2 * sizeof(unsigned int);
+
+        /*
+         * The first pair of cells in interrupt-ranges refers to the
+         * IDU; subsequent pairs refer to the ISUs.
+         */
+        if (oplen < len) {
+                printk(KERN_ERR "Insufficient addresses for distributed"
+                       " OpenPIC (%d < %d)\n", np->n_addrs, len);
+                len = oplen;
+        }
+
+        isu_size = 0;
+        idu_size = 0;
+        if (len > 0 && iranges[1] != 0) {
+                printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
+                       iranges[0], iranges[0] + iranges[1] - 1);
+                idu_size = iranges[1];
+        }
+        if (len > 1)
+                isu_size = iranges[3];
+
+        chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY,
+                               isu_size, NUM_ISA_INTERRUPTS, irq_count,
+                               NR_IRQS - 4, init_senses, irq_count,
+                               " MPIC    ");
+        if (chrp_mpic == NULL) {
+                printk(KERN_ERR "Failed to allocate MPIC structure\n");
+                return;
+        }
+
+        j = na - 1;
+        for (i = 1; i < len; ++i) {
+                iranges += 2;
+                j += na;
+                printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n",
+                       iranges[0], iranges[0] + iranges[1] - 1,
+                       opprop[j]);
+                mpic_assign_isu(chrp_mpic, i - 1, opprop[j]);
+        }
+
+        mpic_init(chrp_mpic);
+        mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+}
+
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+static struct irqaction xmon_irqaction = {
+        .handler = xmon_irq,
+        .mask = CPU_MASK_NONE,
+        .name = "XMON break",
+};
+#endif
+
+void __init chrp_init_IRQ(void)
+{
+        struct device_node *np;
+        unsigned long chrp_int_ack = 0;
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+        struct device_node *kbd;
+#endif
+
+        for (np = find_devices("pci"); np != NULL; np = np->next) {
+                unsigned int *addrp = (unsigned int *)
+                        get_property(np, "8259-interrupt-acknowledge", NULL);
+
+                if (addrp == NULL)
+                        continue;
+                chrp_int_ack = addrp[prom_n_addr_cells(np)-1];
+                break;
+        }
+        if (np == NULL)
+                printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
+
+        chrp_find_openpic();
+
+        i8259_init(chrp_int_ack, 0);
+
+        if (_chrp_type == _CHRP_Pegasos)
+                ppc_md.get_irq        = i8259_irq;
+        else
+                ppc_md.get_irq        = mpic_get_irq;
+
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+        /* see if there is a keyboard in the device tree
+           with a parent of type "adb" */
+        for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
+                if (kbd->parent && kbd->parent->type
+                    && strcmp(kbd->parent->type, "adb") == 0)
+                        break;
+        if (kbd)
+                setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
+#endif
+}
+
+void __init
+chrp_init2(void)
+{
+        request_region(0x20,0x20,"pic1");
+        request_region(0xa0,0x20,"pic2");
+        request_region(0x00,0x20,"dma1");
+        request_region(0x40,0x20,"timer");
+        request_region(0x80,0x10,"dma page reg");
+        request_region(0xc0,0x20,"dma2");
+
+        if (ppc_md.progress)
+                ppc_md.progress("  Have fun!    ", 0x7777);
+}
+
+void __init chrp_init(void)
+{
+        ISA_DMA_THRESHOLD = ~0L;
+        DMA_MODE_READ = 0x44;
+        DMA_MODE_WRITE = 0x48;
+        isa_io_base = CHRP_ISA_IO_BASE;         /* default value */
+        ppc_do_canonicalize_irqs = 1;
+
+        /* Assume we have an 8259... */
+        __irq_offset_value = NUM_ISA_INTERRUPTS;
+
+        ppc_md.setup_arch     = chrp_setup_arch;
+        ppc_md.show_cpuinfo   = chrp_show_cpuinfo;
+
+        ppc_md.init_IRQ       = chrp_init_IRQ;
+        ppc_md.init           = chrp_init2;
+
+        ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
+
+        ppc_md.restart        = rtas_restart;
+        ppc_md.power_off      = rtas_power_off;
+        ppc_md.halt           = rtas_halt;
+
+        ppc_md.time_init      = chrp_time_init;
+        ppc_md.set_rtc_time   = chrp_set_rtc_time;
+        ppc_md.get_rtc_time   = chrp_get_rtc_time;
+        ppc_md.calibrate_decr = chrp_calibrate_decr;
+
+#ifdef CONFIG_SMP
+        smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
+}
+
+#ifdef CONFIG_BOOTX_TEXT
+void
+btext_progress(char *s, unsigned short hex)
+{
+        btext_drawstring(s);
+        btext_drawstring("\n");
+}
+#endif /* CONFIG_BOOTX_TEXT */
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
new file mode 100644
index 000000000000..bf68282670dd
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -0,0 +1,94 @@
+/*
+ * Smp support for CHRP machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
+ * deal of code from the sparc and intel versions.
+ *
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/residual.h>
+#include <asm/time.h>
+#include <asm/open_pic.h>
+#include <asm/machdep.h>
+
+extern unsigned long smp_chrp_cpu_nr;
+
+static int __init smp_chrp_probe(void)
+{
+        if (smp_chrp_cpu_nr > 1)
+                openpic_request_IPIs();
+
+        return smp_chrp_cpu_nr;
+}
+
+static void __devinit smp_chrp_kick_cpu(int nr)
+{
+        *(unsigned long *)KERNELBASE = nr;
+        asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
+}
+
+static void __devinit smp_chrp_setup_cpu(int cpu_nr)
+{
+        if (OpenPIC_Addr)
+                do_openpic_setup_cpu();
+}
+
+static DEFINE_SPINLOCK(timebase_lock);
+static unsigned int timebase_upper = 0, timebase_lower = 0;
+
+void __devinit smp_chrp_give_timebase(void)
+{
+        spin_lock(&timebase_lock);
+        rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+        timebase_upper = get_tbu();
+        timebase_lower = get_tbl();
+        spin_unlock(&timebase_lock);
+
+        while (timebase_upper || timebase_lower)
+                barrier();
+        rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+}
+
+void __devinit smp_chrp_take_timebase(void)
+{
+        while (!(timebase_upper || timebase_lower))
+                barrier();
+        spin_lock(&timebase_lock);
+        set_tb(timebase_upper, timebase_lower);
+        timebase_upper = 0;
+        timebase_lower = 0;
+        spin_unlock(&timebase_lock);
+        printk("CPU %i taken timebase\n", smp_processor_id());
+}
+
+/* CHRP with openpic */
+struct smp_ops_t chrp_smp_ops = {
+        .message_pass = smp_openpic_message_pass,
+        .probe = smp_chrp_probe,
+        .kick_cpu = smp_chrp_kick_cpu,
+        .setup_cpu = smp_chrp_setup_cpu,
+        .give_timebase = smp_chrp_give_timebase,
+        .take_timebase = smp_chrp_take_timebase,
+};
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
new file mode 100644
index 000000000000..9e53535ddb82
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -0,0 +1,188 @@
+/*
+ *  arch/ppc/platforms/chrp_time.c
+ *
+ *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ *
+ * Adapted for PowerPC (PReP) by Gary Thomas
+ * Modified by Cort Dougan (cort@cs.nmt.edu).
+ * Copied and modified from arch/i386/kernel/time.c
+ *
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/init.h>
+#include <linux/bcd.h>
+
+#include <asm/io.h>
+#include <asm/nvram.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+
+extern spinlock_t rtc_lock;
+
+static int nvram_as1 = NVRAM_AS1;
+static int nvram_as0 = NVRAM_AS0;
+static int nvram_data = NVRAM_DATA;
+
+long __init chrp_time_init(void)
+{
+        struct device_node *rtcs;
+        int base;
+
+        rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
+        if (rtcs == NULL)
+                rtcs = find_compatible_devices("rtc", "ds1385-rtc");
+        if (rtcs == NULL || rtcs->addrs == NULL)
+                return 0;
+        base = rtcs->addrs[0].address;
+        nvram_as1 = 0;
+        nvram_as0 = base;
+        nvram_data = base + 1;
+
+        return 0;
+}
+
+int chrp_cmos_clock_read(int addr)
+{
+        if (nvram_as1 != 0)
+                outb(addr>>8, nvram_as1);
+        outb(addr, nvram_as0);
+        return (inb(nvram_data));
+}
+
+void chrp_cmos_clock_write(unsigned long val, int addr)
+{
+        if (nvram_as1 != 0)
+                outb(addr>>8, nvram_as1);
+        outb(addr, nvram_as0);
+        outb(val, nvram_data);
+        return;
+}
+
+/*
+ * Set the hardware clock. -- Cort
+ */
+int chrp_set_rtc_time(struct rtc_time *tmarg)
+{
+        unsigned char save_control, save_freq_select;
+        struct rtc_time tm = *tmarg;
+
+        spin_lock(&rtc_lock);
+
+        save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */
+
+        chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL);
+
+        save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */
+
+        chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+        tm.tm_year -= 1900;
+        if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+                BIN_TO_BCD(tm.tm_sec);
+                BIN_TO_BCD(tm.tm_min);
+                BIN_TO_BCD(tm.tm_hour);
+                BIN_TO_BCD(tm.tm_mon);
+                BIN_TO_BCD(tm.tm_mday);
+                BIN_TO_BCD(tm.tm_year);
+        }
+        chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS);
+        chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES);
+        chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS);
+        chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH);
+        chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH);
+        chrp_cmos_clock_write(tm.tm_year,RTC_YEAR);
+
+        /* The following flags have to be released exactly in this order,
+         * otherwise the DS12887 (popular MC146818A clone with integrated
+         * battery and quartz) will not reset the oscillator and will not
+         * update precisely 500 ms later. You won't find this mentioned in
+         * the Dallas Semiconductor data sheets, but who believes data
+         * sheets anyway ...                           -- Markus Kuhn
+         */
+        chrp_cmos_clock_write(save_control, RTC_CONTROL);
+        chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT);
+
+        spin_unlock(&rtc_lock);
+        return 0;
+}
+
+void chrp_get_rtc_time(struct rtc_time *tm)
+{
+        unsigned int year, mon, day, hour, min, sec;
+        int uip, i;
+
+        /* The Linux interpretation of the CMOS clock register contents:
+         * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+         * RTC registers show the second which has precisely just started.
+         * Let's hope other operating systems interpret the RTC the same way.
+         */
+
+        /* Since the UIP flag is set for about 2.2 ms and the clock
+         * is typically written with a precision of 1 jiffy, trying
+         * to obtain a precision better than a few milliseconds is
+         * an illusion. Only consistency is interesting, this also
+         * allows to use the routine for /dev/rtc without a potential
+         * 1 second kernel busy loop triggered by any reader of /dev/rtc.
+         */
+
+        for ( i = 0; i<1000000; i++) {
+                uip = chrp_cmos_clock_read(RTC_FREQ_SELECT);
+                sec = chrp_cmos_clock_read(RTC_SECONDS);
+                min = chrp_cmos_clock_read(RTC_MINUTES);
+                hour = chrp_cmos_clock_read(RTC_HOURS);
+                day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH);
+                mon = chrp_cmos_clock_read(RTC_MONTH);
+                year = chrp_cmos_clock_read(RTC_YEAR);
+                uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT);
+                if ((uip & RTC_UIP)==0) break;
+        }
+
+        if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+                BCD_TO_BIN(sec);
+                BCD_TO_BIN(min);
+                BCD_TO_BIN(hour);
+                BCD_TO_BIN(day);
+                BCD_TO_BIN(mon);
+                BCD_TO_BIN(year);
+        }
+        if ((year += 1900) < 1970)
+                year += 100;
+        tm->tm_sec = sec;
+        tm->tm_min = min;
+        tm->tm_hour = hour;
+        tm->tm_mday = day;
+        tm->tm_mon = mon;
+        tm->tm_year = year;
+}
+
+
+void __init chrp_calibrate_decr(void)
+{
+        struct device_node *cpu;
+        unsigned int freq, *fp;
+
+        /*
+         * The cpu node should have a timebase-frequency property
+         * to tell us the rate at which the decrementer counts.
+         */
+        freq = 16666000;                /* hardcoded default */
+        cpu = find_type_devices("cpu");
+        if (cpu != 0) {
+                fp = (unsigned int *)
+                        get_property(cpu, "timebase-frequency", NULL);
+                if (fp != 0)
+                        freq = *fp;
+        }
+        ppc_tb_freq = freq;
+}
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 0eca17df239e..0037a8c8c81f 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -71,10 +71,6 @@ static u32 level_mask[4];
 
 static DEFINE_SPINLOCK(pmac_pic_lock);
 
-/* XXX here for now, should move to arch/powerpc/kernel/irq.c */
-int ppc_do_canonicalize_irqs;
-EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
-
 #define GATWICK_IRQ_POOL_SIZE        10
 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];