aboutsummaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2008-08-27 20:01:57 -0400
committerDavid S. Miller <davem@davemloft.net>2008-08-29 05:13:10 -0400
commit334ae614772b1147435dce9be3911f9040dff0d9 (patch)
treea443e687646ab25744b20e43963f728870122e97 /arch
parent7f06a3b2c162573c924f425053227a52b4bd7cb1 (diff)
sparc: Kill SBUS DVMA layer.
This thing was completely pointless. Just find the OF device in the parent of drivers that want to program this device, and map the DMA regs inside such drivers too. This also moves the dummy claim_dma_lock() and release_dma_lock() implementation to floppy_32.h, which makes it handle this issue just like floppy_64.h does. Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch')
-rw-r--r--arch/sparc/include/asm/dma.h141
-rw-r--r--arch/sparc/include/asm/dma_32.h288
-rw-r--r--arch/sparc/include/asm/dma_64.h205
-rw-r--r--arch/sparc/include/asm/floppy_32.h11
-rw-r--r--arch/sparc/kernel/sparc_ksyms.c1
-rw-r--r--arch/sparc64/kernel/sparc64_ksyms.c1
6 files changed, 147 insertions, 500 deletions
diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h
index aa1d90ac04c5..493563446790 100644
--- a/arch/sparc/include/asm/dma.h
+++ b/arch/sparc/include/asm/dma.h
@@ -1,8 +1,139 @@
1#ifndef ___ASM_SPARC_DMA_H 1#ifndef _ASM_SPARC_DMA_H
2#define ___ASM_SPARC_DMA_H 2#define _ASM_SPARC_DMA_H
3#if defined(__sparc__) && defined(__arch64__) 3
4#include <asm/dma_64.h> 4/* These are irrelevant for Sparc DMA, but we leave it in so that
5 * things can compile.
6 */
7#define MAX_DMA_CHANNELS 8
8#define DMA_MODE_READ 1
9#define DMA_MODE_WRITE 2
10#define MAX_DMA_ADDRESS (~0UL)
11
12/* Useful constants */
13#define SIZE_16MB (16*1024*1024)
14#define SIZE_64K (64*1024)
15
16/* SBUS DMA controller reg offsets */
17#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
18#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
19#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
20#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
21
22/* Fields in the cond_reg register */
23/* First, the version identification bits */
24#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
25#define DMA_VERS0 0x00000000 /* Sunray DMA version */
26#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
27#define DMA_VERS1 0x80000000 /* DMA rev 1 */
28#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
29#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
30#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
31
32#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
33#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
34#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
35#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
36#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
37#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
38#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
39#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
40#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
41#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
42#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
43#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
44#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
45#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
46#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
47#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
48#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
49#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
50#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
51#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
52#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
53#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
54#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
55#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
56#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
57#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
58#define DMA_BRST64 0x000c0000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
59#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */
60#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */
61#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
62#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
63#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
64#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
65#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
66#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
67#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
68#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
69#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
70#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
71#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
72#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */
73
74/* Values describing the burst-size property from the PROM */
75#define DMA_BURST1 0x01
76#define DMA_BURST2 0x02
77#define DMA_BURST4 0x04
78#define DMA_BURST8 0x08
79#define DMA_BURST16 0x10
80#define DMA_BURST32 0x20
81#define DMA_BURST64 0x40
82#define DMA_BURSTBITS 0x7f
83
84/* From PCI */
85
86#ifdef CONFIG_PCI
87extern int isa_dma_bridge_buggy;
5#else 88#else
6#include <asm/dma_32.h> 89#define isa_dma_bridge_buggy (0)
7#endif 90#endif
91
92#ifdef CONFIG_SPARC32
93
94#include <asm/sbus.h>
95
96/* Routines for data transfer buffers. */
97BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
98BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long)
99
100#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
101#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
102
103/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
104BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
105BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
106BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
107BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
108
109#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
110#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
111#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
112#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
113
114/*
115 * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
116 *
117 * The mmu_map_dma_area establishes two mappings in one go.
118 * These mappings point to pages normally mapped at 'va' (linear address).
119 * First mapping is for CPU visible address at 'a', uncached.
120 * This is an alias, but it works because it is an uncached mapping.
121 * Second mapping is for device visible address, or "bus" address.
122 * The bus address is returned at '*pba'.
123 *
124 * These functions seem distinct, but are hard to split. On sun4c,
125 * at least for now, 'a' is equal to bus address, and retured in *pba.
126 * On sun4m, page attributes depend on the CPU type, so we have to
127 * know if we are mapping RAM or I/O, so it has to be an additional argument
128 * to a separate mapping function for CPU visible mappings.
129 */
130BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
131BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
132BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len)
133
134#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
135#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
136#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba)
8#endif 137#endif
138
139#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_32.h b/arch/sparc/include/asm/dma_32.h
deleted file mode 100644
index cf7189c0079b..000000000000
--- a/arch/sparc/include/asm/dma_32.h
+++ /dev/null
@@ -1,288 +0,0 @@
1/* include/asm/dma.h
2 *
3 * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
4 */
5
6#ifndef _ASM_SPARC_DMA_H
7#define _ASM_SPARC_DMA_H
8
9#include <linux/kernel.h>
10#include <linux/types.h>
11
12#include <asm/vac-ops.h> /* for invalidate's, etc. */
13#include <asm/sbus.h>
14#include <asm/delay.h>
15#include <asm/oplib.h>
16#include <asm/system.h>
17#include <asm/io.h>
18#include <linux/spinlock.h>
19
20struct page;
21extern spinlock_t dma_spin_lock;
22
23static inline unsigned long claim_dma_lock(void)
24{
25 unsigned long flags;
26 spin_lock_irqsave(&dma_spin_lock, flags);
27 return flags;
28}
29
30static inline void release_dma_lock(unsigned long flags)
31{
32 spin_unlock_irqrestore(&dma_spin_lock, flags);
33}
34
35/* These are irrelevant for Sparc DMA, but we leave it in so that
36 * things can compile.
37 */
38#define MAX_DMA_CHANNELS 8
39#define MAX_DMA_ADDRESS (~0UL)
40#define DMA_MODE_READ 1
41#define DMA_MODE_WRITE 2
42
43/* Useful constants */
44#define SIZE_16MB (16*1024*1024)
45#define SIZE_64K (64*1024)
46
47/* SBUS DMA controller reg offsets */
48#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
49#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
50#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
51#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
52
53/* DVMA chip revisions */
54enum dvma_rev {
55 dvmarev0,
56 dvmaesc1,
57 dvmarev1,
58 dvmarev2,
59 dvmarev3,
60 dvmarevplus,
61 dvmahme
62};
63
64#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
65
66/* Linux DMA information structure, filled during probe. */
67struct sbus_dma {
68 struct sbus_dma *next;
69 struct sbus_dev *sdev;
70 void __iomem *regs;
71
72 /* Status, misc info */
73 int node; /* Prom node for this DMA device */
74 int running; /* Are we doing DMA now? */
75 int allocated; /* Are we "owned" by anyone yet? */
76
77 /* Transfer information. */
78 unsigned long addr; /* Start address of current transfer */
79 int nbytes; /* Size of current transfer */
80 int realbytes; /* For splitting up large transfers, etc. */
81
82 /* DMA revision */
83 enum dvma_rev revision;
84};
85
86extern struct sbus_dma *dma_chain;
87
88/* Broken hardware... */
89#ifdef CONFIG_SUN4
90/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
91 * Or is rev0 present only on sun4 boxes? -jj */
92#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
93#else
94#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
95#endif
96#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
97
98/* Main routines in dma.c */
99extern void dvma_init(struct sbus_bus *);
100
101/* Fields in the cond_reg register */
102/* First, the version identification bits */
103#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
104#define DMA_VERS0 0x00000000 /* Sunray DMA version */
105#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
106#define DMA_VERS1 0x80000000 /* DMA rev 1 */
107#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
108#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
109#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
110
111#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
112#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
113#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
114#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
115#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
116#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
117#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
118#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
119#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
120#define DMA_RST_BPP DMA_RST_SCSI /* Reset the BPP controller */
121#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
122#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
123#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
124#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
125#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
126#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
127#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
128#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
129#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
130#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
131#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
132#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
133#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
134#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
135#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
136#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
137#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
138#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
139#define DMA_BRST32 0x00040000 /* SCSI/BPP: 32byte bursts */
140#define DMA_BRST16 0x00000000 /* SCSI/BPP: 16byte bursts */
141#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
142#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
143#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
144#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
145#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
146#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
147#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
148#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
149#define DMA_BPP_ON DMA_SCSI_ON /* Enable BPP dma */
150#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
151#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
152#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
153#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */
154
155/* Values describing the burst-size property from the PROM */
156#define DMA_BURST1 0x01
157#define DMA_BURST2 0x02
158#define DMA_BURST4 0x04
159#define DMA_BURST8 0x08
160#define DMA_BURST16 0x10
161#define DMA_BURST32 0x20
162#define DMA_BURST64 0x40
163#define DMA_BURSTBITS 0x7f
164
165/* Determine highest possible final transfer address given a base */
166#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
167
168/* Yes, I hack a lot of elisp in my spare time... */
169#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR))
170#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
171#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE))
172#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE)))
173#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
174#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
175#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
176#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr))
177#define DMA_BEGINDMA_W(regs) \
178 ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
179#define DMA_BEGINDMA_R(regs) \
180 ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
181
182/* For certain DMA chips, we need to disable ints upon irq entry
183 * and turn them back on when we are done. So in any ESP interrupt
184 * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
185 * when leaving the handler. You have been warned...
186 */
187#define DMA_IRQ_ENTRY(dma, dregs) do { \
188 if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
189 } while (0)
190
191#define DMA_IRQ_EXIT(dma, dregs) do { \
192 if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
193 } while(0)
194
195#if 0 /* P3 this stuff is inline in ledma.c:init_restart_ledma() */
196/* Pause until counter runs out or BIT isn't set in the DMA condition
197 * register.
198 */
199static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
200 unsigned long bit)
201{
202 int ctr = 50000; /* Let's find some bugs ;) */
203
204 /* Busy wait until the bit is not set any more */
205 while((regs->cond_reg&bit) && (ctr>0)) {
206 ctr--;
207 __delay(5);
208 }
209
210 /* Check for bogus outcome. */
211 if(!ctr)
212 panic("DMA timeout");
213}
214
215/* Reset the friggin' thing... */
216#define DMA_RESET(dma) do { \
217 struct sparc_dma_registers *regs = dma->regs; \
218 /* Let the current FIFO drain itself */ \
219 sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \
220 /* Reset the logic */ \
221 regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \
222 __delay(400); /* let the bits set ;) */ \
223 regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \
224 sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \
225 /* Enable FAST transfers if available */ \
226 if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \
227 dma->running = 0; \
228} while(0)
229#endif
230
231#define for_each_dvma(dma) \
232 for((dma) = dma_chain; (dma); (dma) = (dma)->next)
233
234extern int get_dma_list(char *);
235extern int request_dma(unsigned int, __const__ char *);
236extern void free_dma(unsigned int);
237
238/* From PCI */
239
240#ifdef CONFIG_PCI
241extern int isa_dma_bridge_buggy;
242#else
243#define isa_dma_bridge_buggy (0)
244#endif
245
246/* Routines for data transfer buffers. */
247BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
248BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long)
249
250#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
251#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
252
253/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
254BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
255BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
256BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
257BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
258
259#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
260#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
261#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
262#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
263
264/*
265 * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
266 *
267 * The mmu_map_dma_area establishes two mappings in one go.
268 * These mappings point to pages normally mapped at 'va' (linear address).
269 * First mapping is for CPU visible address at 'a', uncached.
270 * This is an alias, but it works because it is an uncached mapping.
271 * Second mapping is for device visible address, or "bus" address.
272 * The bus address is returned at '*pba'.
273 *
274 * These functions seem distinct, but are hard to split. On sun4c,
275 * at least for now, 'a' is equal to bus address, and retured in *pba.
276 * On sun4m, page attributes depend on the CPU type, so we have to
277 * know if we are mapping RAM or I/O, so it has to be an additional argument
278 * to a separate mapping function for CPU visible mappings.
279 */
280BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
281BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
282BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len)
283
284#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
285#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
286#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba)
287
288#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h
deleted file mode 100644
index 46a8aecffc02..000000000000
--- a/arch/sparc/include/asm/dma_64.h
+++ /dev/null
@@ -1,205 +0,0 @@
1/*
2 * include/asm/dma.h
3 *
4 * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
5 */
6
7#ifndef _ASM_SPARC64_DMA_H
8#define _ASM_SPARC64_DMA_H
9
10#include <linux/kernel.h>
11#include <linux/types.h>
12#include <linux/spinlock.h>
13
14#include <asm/sbus.h>
15#include <asm/delay.h>
16#include <asm/oplib.h>
17
18/* These are irrelevant for Sparc DMA, but we leave it in so that
19 * things can compile.
20 */
21#define MAX_DMA_CHANNELS 8
22#define DMA_MODE_READ 1
23#define DMA_MODE_WRITE 2
24#define MAX_DMA_ADDRESS (~0UL)
25
26/* Useful constants */
27#define SIZE_16MB (16*1024*1024)
28#define SIZE_64K (64*1024)
29
30/* SBUS DMA controller reg offsets */
31#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
32#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
33#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
34#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
35
36/* DVMA chip revisions */
37enum dvma_rev {
38 dvmarev0,
39 dvmaesc1,
40 dvmarev1,
41 dvmarev2,
42 dvmarev3,
43 dvmarevplus,
44 dvmahme
45};
46
47#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
48
49/* Linux DMA information structure, filled during probe. */
50struct sbus_dma {
51 struct sbus_dma *next;
52 struct sbus_dev *sdev;
53 void __iomem *regs;
54
55 /* Status, misc info */
56 int node; /* Prom node for this DMA device */
57 int running; /* Are we doing DMA now? */
58 int allocated; /* Are we "owned" by anyone yet? */
59
60 /* Transfer information. */
61 u32 addr; /* Start address of current transfer */
62 int nbytes; /* Size of current transfer */
63 int realbytes; /* For splitting up large transfers, etc. */
64
65 /* DMA revision */
66 enum dvma_rev revision;
67};
68
69extern struct sbus_dma *dma_chain;
70
71/* Broken hardware... */
72#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
73#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
74
75/* Main routines in dma.c */
76extern void dvma_init(struct sbus_bus *);
77
78/* Fields in the cond_reg register */
79/* First, the version identification bits */
80#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
81#define DMA_VERS0 0x00000000 /* Sunray DMA version */
82#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
83#define DMA_VERS1 0x80000000 /* DMA rev 1 */
84#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
85#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
86#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
87
88#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
89#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
90#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
91#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
92#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
93#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
94#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
95#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
96#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
97#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
98#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
99#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
100#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
101#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
102#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
103#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
104#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
105#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
106#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
107#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
108#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
109#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
110#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
111#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
112#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
113#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
114#define DMA_BRST64 0x000c0000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
115#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */
116#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */
117#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
118#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
119#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
120#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
121#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
122#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
123#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
124#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
125#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
126#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
127#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
128#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */
129
130/* Values describing the burst-size property from the PROM */
131#define DMA_BURST1 0x01
132#define DMA_BURST2 0x02
133#define DMA_BURST4 0x04
134#define DMA_BURST8 0x08
135#define DMA_BURST16 0x10
136#define DMA_BURST32 0x20
137#define DMA_BURST64 0x40
138#define DMA_BURSTBITS 0x7f
139
140/* Determine highest possible final transfer address given a base */
141#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
142
143/* Yes, I hack a lot of elisp in my spare time... */
144#define DMA_ERROR_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
145#define DMA_IRQ_P(regs) ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
146#define DMA_WRITE_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
147#define DMA_OFF(__regs) \
148do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
149 tmp &= ~DMA_ENABLE; \
150 sbus_writel(tmp, (__regs) + DMA_CSR); \
151} while(0)
152#define DMA_INTSOFF(__regs) \
153do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
154 tmp &= ~DMA_INT_ENAB; \
155 sbus_writel(tmp, (__regs) + DMA_CSR); \
156} while(0)
157#define DMA_INTSON(__regs) \
158do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
159 tmp |= DMA_INT_ENAB; \
160 sbus_writel(tmp, (__regs) + DMA_CSR); \
161} while(0)
162#define DMA_PUNTFIFO(__regs) \
163do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
164 tmp |= DMA_FIFO_INV; \
165 sbus_writel(tmp, (__regs) + DMA_CSR); \
166} while(0)
167#define DMA_SETSTART(__regs, __addr) \
168 sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
169#define DMA_BEGINDMA_W(__regs) \
170do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
171 tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
172 sbus_writel(tmp, (__regs) + DMA_CSR); \
173} while(0)
174#define DMA_BEGINDMA_R(__regs) \
175do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
176 tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
177 tmp &= ~DMA_ST_WRITE; \
178 sbus_writel(tmp, (__regs) + DMA_CSR); \
179} while(0)
180
181/* For certain DMA chips, we need to disable ints upon irq entry
182 * and turn them back on when we are done. So in any ESP interrupt
183 * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
184 * when leaving the handler. You have been warned...
185 */
186#define DMA_IRQ_ENTRY(dma, dregs) do { \
187 if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
188 } while (0)
189
190#define DMA_IRQ_EXIT(dma, dregs) do { \
191 if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
192 } while(0)
193
194#define for_each_dvma(dma) \
195 for((dma) = dma_chain; (dma); (dma) = (dma)->next)
196
197/* From PCI */
198
199#ifdef CONFIG_PCI
200extern int isa_dma_bridge_buggy;
201#else
202#define isa_dma_bridge_buggy (0)
203#endif
204
205#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
index ae3f00bf22ff..ff2b91c6eeff 100644
--- a/arch/sparc/include/asm/floppy_32.h
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -385,4 +385,15 @@ static int sparc_eject(void)
385 385
386#define EXTRA_FLOPPY_PARAMS 386#define EXTRA_FLOPPY_PARAMS
387 387
388static DEFINE_SPINLOCK(dma_spin_lock);
389
390#define claim_dma_lock() \
391({ unsigned long flags; \
392 spin_lock_irqsave(&dma_spin_lock, flags); \
393 flags; \
394})
395
396#define release_dma_lock(__flags) \
397 spin_unlock_irqrestore(&dma_spin_lock, __flags);
398
388#endif /* !(__ASM_SPARC_FLOPPY_H) */ 399#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index b23cea5ca5d1..8a392d3d89e4 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -154,7 +154,6 @@ EXPORT_SYMBOL(BTFIXUP_CALL(pgprot_noncached));
154 154
155#ifdef CONFIG_SBUS 155#ifdef CONFIG_SBUS
156EXPORT_SYMBOL(sbus_root); 156EXPORT_SYMBOL(sbus_root);
157EXPORT_SYMBOL(dma_chain);
158EXPORT_SYMBOL(sbus_set_sbus64); 157EXPORT_SYMBOL(sbus_set_sbus64);
159EXPORT_SYMBOL(sbus_alloc_consistent); 158EXPORT_SYMBOL(sbus_alloc_consistent);
160EXPORT_SYMBOL(sbus_free_consistent); 159EXPORT_SYMBOL(sbus_free_consistent);
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 3b2890c207f3..8e6ac5c1b7bd 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -161,7 +161,6 @@ EXPORT_SYMBOL(auxio_set_lte);
161#endif 161#endif
162#ifdef CONFIG_SBUS 162#ifdef CONFIG_SBUS
163EXPORT_SYMBOL(sbus_root); 163EXPORT_SYMBOL(sbus_root);
164EXPORT_SYMBOL(dma_chain);
165EXPORT_SYMBOL(sbus_set_sbus64); 164EXPORT_SYMBOL(sbus_set_sbus64);
166EXPORT_SYMBOL(sbus_alloc_consistent); 165EXPORT_SYMBOL(sbus_alloc_consistent);
167EXPORT_SYMBOL(sbus_free_consistent); 166EXPORT_SYMBOL(sbus_free_consistent);
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-15 16:42:26 -0500