x86/PCI: use dev_printk when possible

Convert printks to use dev_printk().

I converted DBG() to dev_dbg().  This DBG() is from arch/x86/pci/pci.h and
requires source-code modification to enable, so dev_dbg() seems roughly
equivalent.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

4 files changed, 64 insertions, 76 deletions

diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index ff3a6a336342..4bdaa590375d 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -23,7 +23,8 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
                 pci_read_config_byte(d, reg++, &busno);
                 pci_read_config_byte(d, reg++, &suba);
                 pci_read_config_byte(d, reg++, &subb);
-                DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+                dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
+                        suba, subb);
                 if (busno)
                         pci_scan_bus_with_sysdata(busno);       /* Bus A */
                 if (suba < subb)
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index a09505806b82..5807d1bc73f7 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -128,10 +128,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
                                 pr = pci_find_parent_resource(dev, r);
                                 if (!r->start || !pr ||
                                     request_resource(pr, r) < 0) {
-                                        printk(KERN_ERR "PCI: Cannot allocate "
-                                                "resource region %d "
-                                                "of bridge %s\n",
-                                                idx, pci_name(dev));
+                                        dev_err(&dev->dev, "BAR %d: can't "
+                                                "allocate resource\n", idx);
                                         /*
                                          * Something is wrong with the region.
                                          * Invalidate the resource to prevent
@@ -166,15 +164,15 @@ static void __init pcibios_allocate_resources(int pass)
                         else
                                 disabled = !(command & PCI_COMMAND_MEMORY);
                         if (pass == disabled) {
-                                DBG("PCI: Resource %08lx-%08lx "
-                                    "(f=%lx, d=%d, p=%d)\n",
-                                    r->start, r->end, r->flags, disabled, pass);
+                                dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
+                                        "(f=%lx, d=%d, p=%d)\n",
+                                        (unsigned long long) r->start,
+                                        (unsigned long long) r->end,
+                                        r->flags, disabled, pass);
                                 pr = pci_find_parent_resource(dev, r);
                                 if (!pr || request_resource(pr, r) < 0) {
-                                        printk(KERN_ERR "PCI: Cannot allocate "
-                                                "resource region %d "
-                                                "of device %s\n",
-                                                idx, pci_name(dev));
+                                        dev_err(&dev->dev, "BAR %d: can't "
+                                                "allocate resource\n", idx);
                                         /* We'll assign a new address later */
                                         r->end -= r->start;
                                         r->start = 0;
@@ -187,8 +185,7 @@ static void __init pcibios_allocate_resources(int pass)
                                 /* Turn the ROM off, leave the resource region,
                                  * but keep it unregistered. */
                                 u32 reg;
-                                DBG("PCI: Switching off ROM of %s\n",
-                                        pci_name(dev));
+                                dev_dbg(&dev->dev, "disabling ROM\n");
                                 r->flags &= ~IORESOURCE_ROM_ENABLE;
                                 pci_read_config_dword(dev,
                                                 dev->rom_base_reg, &reg);
@@ -257,8 +254,7 @@ void pcibios_set_master(struct pci_dev *dev)
                 lat = pcibios_max_latency;
         else
                 return;
-        printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
-                pci_name(dev), lat);
+        dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
         pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 6a06a2eb0597..fec0123b33a9 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -436,7 +436,7 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
         WARN_ON_ONCE(pirq >= 9);
         if (pirq > 8) {
-                printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+                dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
                 return 0;
         }
         return read_config_nybble(router, 0x74, pirq-1);
@@ -446,7 +446,7 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 {
         WARN_ON_ONCE(pirq >= 9);
         if (pirq > 8) {
-                printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+                dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
                 return 0;
         }
         write_config_nybble(router, 0x74, pirq-1, irq);
@@ -492,15 +492,17 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
         irq = 0;
         if (pirq <= 4)
                 irq = read_config_nybble(router, 0x56, pirq - 1);
-        printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
-                dev->vendor, dev->device, pirq, irq);
+        dev_info(&dev->dev,
+                 "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n",
+                 dev->vendor, dev->device, pirq, irq);
         return irq;
 }
 
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-        printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
-                dev->vendor, dev->device, pirq, irq);
+        dev_info(&dev->dev,
+                 "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n",
+                 dev->vendor, dev->device, pirq, irq);
         if (pirq <= 4)
                 write_config_nybble(router, 0x56, pirq - 1, irq);
         return 1;
@@ -730,7 +732,6 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
         switch (device) {
         case PCI_DEVICE_ID_AL_M1533:
         case PCI_DEVICE_ID_AL_M1563:
-                printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
                 r->name = "ALI";
                 r->get = pirq_ali_get;
                 r->set = pirq_ali_set;
@@ -840,11 +841,9 @@ static void __init pirq_find_router(struct irq_router *r)
                         h->probe(r, pirq_router_dev, pirq_router_dev->device))
                         break;
         }
-        printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
-                pirq_router.name,
-                pirq_router_dev->vendor,
-                pirq_router_dev->device,
-                pci_name(pirq_router_dev));
+        dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n",
+                 pirq_router.name,
+                 pirq_router_dev->vendor, pirq_router_dev->device);
 
         /* The device remains referenced for the kernel lifetime */
 }
@@ -877,7 +876,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
         /* Find IRQ pin */
         pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
         if (!pin) {
-                DBG(KERN_DEBUG " -> no interrupt pin\n");
+                dev_dbg(&dev->dev, "no interrupt pin\n");
                 return 0;
         }
         pin = pin - 1;
@@ -887,20 +886,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
         if (!pirq_table)
                 return 0;
 
-        DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
         info = pirq_get_info(dev);
         if (!info) {
-                DBG(" -> not found in routing table\n" KERN_DEBUG);
+                dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
+                        'A' + pin);
                 return 0;
         }
         pirq = info->irq[pin].link;
         mask = info->irq[pin].bitmap;
         if (!pirq) {
-                DBG(" -> not routed\n" KERN_DEBUG);
+                dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin);
                 return 0;
         }
-        DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
-                pirq_table->exclusive_irqs);
+        dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
+                'A' + pin, pirq, mask, pirq_table->exclusive_irqs);
         mask &= pcibios_irq_mask;
 
         /* Work around broken HP Pavilion Notebooks which assign USB to
@@ -930,10 +929,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
                 if (pci_probe & PCI_USE_PIRQ_MASK)
                         newirq = 0;
                 else
-                        printk("\n" KERN_WARNING
-                                "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
-                                KERN_DEBUG, newirq,
-                                pci_name(dev));
+                        dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
+                                 "%#x; try pci=usepirqmask\n", newirq, mask);
         }
         if (!newirq && assign) {
                 for (i = 0; i < 16; i++) {
@@ -944,39 +941,35 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
                                 newirq = i;
                 }
         }
-        DBG(" -> newirq=%d", newirq);
+        dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq);
 
         /* Check if it is hardcoded */
         if ((pirq & 0xf0) == 0xf0) {
                 irq = pirq & 0xf;
-                DBG(" -> hardcoded IRQ %d\n", irq);
-                msg = "Hardcoded";
+                msg = "hardcoded";
         } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
         ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
-                DBG(" -> got IRQ %d\n", irq);
-                msg = "Found";
+                msg = "found";
                 eisa_set_level_irq(irq);
         } else if (newirq && r->set &&
                 (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
-                DBG(" -> assigning IRQ %d", newirq);
                 if (r->set(pirq_router_dev, dev, pirq, newirq)) {
                         eisa_set_level_irq(newirq);
-                        DBG(" ... OK\n");
-                        msg = "Assigned";
+                        msg = "assigned";
                         irq = newirq;
                 }
         }
 
         if (!irq) {
-                DBG(" ... failed\n");
                 if (newirq && mask == (1 << newirq)) {
-                        msg = "Guessed";
+                        msg = "guessed";
                         irq = newirq;
-                } else
+                } else {
+                        dev_dbg(&dev->dev, "can't route interrupt\n");
                         return 0;
+                }
         }
-        printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
-                pci_name(dev));
+        dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq);
 
         /* Update IRQ for all devices with the same pirq value */
         while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -996,17 +989,17 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
                         (!(pci_probe & PCI_USE_PIRQ_MASK) || \
                         ((1 << dev2->irq) & mask))) {
 #ifndef CONFIG_PCI_MSI
-                                printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
-                                       pci_name(dev2), dev2->irq, irq);
+                                dev_info(&dev2->dev, "IRQ routing conflict: "
+                                         "have IRQ %d, want IRQ %d\n",
+                                         dev2->irq, irq);
 #endif
                                 continue;
                         }
                         dev2->irq = irq;
                         pirq_penalty[irq]++;
                         if (dev != dev2)
-                                printk(KERN_INFO
-                                        "PCI: Sharing IRQ %d with %s\n",
-                                        irq, pci_name(dev2));
+                                dev_info(&dev->dev, "sharing IRQ %d with %s\n",
+                                         irq, pci_name(dev2));
                 }
         }
         return 1;
@@ -1025,8 +1018,7 @@ static void __init pcibios_fixup_irqs(void)
                  * already in use.
                  */
                 if (dev->irq >= 16) {
-                        DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
-                                pci_name(dev), dev->irq);
+                        dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
                         dev->irq = 0;
                 }
                 /*
@@ -1070,12 +1062,12 @@ static void __init pcibios_fixup_irqs(void)
                                         irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
                                                         PCI_SLOT(bridge->devfn), pin);
                                         if (irq >= 0)
-                                                printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-                                                        pci_name(bridge), 'A' + pin, irq);
+                                                dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n",
+                                                         pci_name(bridge),
+                                                         'A' + pin, irq);
                                 }
                                 if (irq >= 0) {
-                                        printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-                                                pci_name(dev), 'A' + pin, irq);
+                                        dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq);
                                         dev->irq = irq;
                                 }
                         }
@@ -1231,25 +1223,24 @@ static int pirq_enable_irq(struct pci_dev *dev)
                                 irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
                                                 PCI_SLOT(bridge->devfn), pin);
                                 if (irq >= 0)
-                                        printk(KERN_WARNING
-                                                "PCI: using PPB %s[%c] to get irq %d\n",
-                                                pci_name(bridge),
-                                                'A' + pin, irq);
+                                        dev_warn(&dev->dev, "using bridge %s "
+                                                 "INT %c to get IRQ %d\n",
+                                                 pci_name(bridge), 'A' + pin,
+                                                 irq);
                                 dev = bridge;
                         }
                         dev = temp_dev;
                         if (irq >= 0) {
-                                printk(KERN_INFO
-                                        "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-                                        pci_name(dev), 'A' + pin, irq);
+                                dev_info(&dev->dev, "PCI->APIC IRQ transform: "
+                                         "INT %c -> IRQ %d\n", 'A' + pin, irq);
                                 dev->irq = irq;
                                 return 0;
                         } else
-                                msg = " Probably buggy MP table.";
+                                msg = "; probably buggy MP table";
                 } else if (pci_probe & PCI_BIOS_IRQ_SCAN)
                         msg = "";
                 else
-                        msg = " Please try using pci=biosirq.";
+                        msg = "; please try using pci=biosirq";
 
                 /*
                  * With IDE legacy devices the IRQ lookup failure is not
@@ -1259,9 +1250,8 @@ static int pirq_enable_irq(struct pci_dev *dev)
                                 !(dev->class & 0x5))
                         return 0;
 
-                printk(KERN_WARNING
-                        "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-                        'A' + pin, pci_name(dev), msg);
+                dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
+                         'A' + pin, msg);
         }
         return 0;
 }
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index f4b16dc11dad..1177845d3186 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -131,13 +131,14 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
         u8 busno, suba, subb;
         int quad = BUS2QUAD(d->bus->number);
 
-        printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+        dev_info(&d->dev, "searching for i450NX host bridges\n");
         reg = 0xd0;
         for(pxb=0; pxb<2; pxb++) {
                 pci_read_config_byte(d, reg++, &busno);
                 pci_read_config_byte(d, reg++, &suba);
                 pci_read_config_byte(d, reg++, &subb);
-                DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+                dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
+                        pxb, busno, suba, subb);
                 if (busno) {
                         /* Bus A */
                         pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));