perf_counter: powerpc: supply more precise information on counter overflow events

This uses values from the MMCRA, SIAR and SDAR registers on
powerpc to supply more precise information for overflow events,
including a data address when PERF_RECORD_ADDR is specified.

Since POWER6 uses different bit positions in MMCRA from earlier
processors, this converts the struct power_pmu limited_pmc5_6
field, which only had 0/1 values, into a flags field and
defines bit values for its previous use (PPMU_LIMITED_PMC5_6)
and a new flag (PPMU_ALT_SIPR) to indicate that the processor
uses the POWER6 bit positions rather than the earlier
positions.  It also adds definitions in reg.h for the new and
old positions of the bit that indicates that the SIAR and SDAR
values come from the same instruction.

For the data address, the SDAR value is supplied if we are not
doing instruction sampling.  In that case there is no guarantee
that the address given in the PERF_RECORD_ADDR subrecord will
correspond to the instruction whose address is given in the
PERF_RECORD_IP subrecord.

If instruction sampling is enabled (e.g. because this counter
is counting a marked instruction event), then we only supply
the SDAR value for the PERF_RECORD_ADDR subrecord if it
corresponds to the instruction whose address is in the
PERF_RECORD_IP subrecord.  Otherwise we supply 0.

[ Impact: support more PMU hardware features on PowerPC ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18955.37028.48861.555309@drongo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

5 files changed, 97 insertions, 7 deletions

diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
index ceea76a48e3d..1c60f0ca7920 100644
--- a/arch/powerpc/include/asm/perf_counter.h
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -30,7 +30,7 @@ struct power_pmu {
                                     u64 alt[]);
         void    (*disable_pmc)(unsigned int pmc, u64 mmcr[]);
         int     (*limited_pmc_event)(u64 event);
-        int     limited_pmc5_6; /* PMC5 and PMC6 have limited function */
+        u32     flags;
         int     n_generic;
         int     *generic_events;
 };
@@ -38,12 +38,24 @@ struct power_pmu {
 extern struct power_pmu *ppmu;
 
 /*
+ * Values for power_pmu.flags
+ */
+#define PPMU_LIMITED_PMC5_6     1       /* PMC5/6 have limited function */
+#define PPMU_ALT_SIPR           2       /* uses alternate posn for SIPR/HV */
+
+/*
  * Values for flags to get_alternatives()
  */
 #define PPMU_LIMITED_PMC_OK     1       /* can put this on a limited PMC */
 #define PPMU_LIMITED_PMC_REQD   2       /* have to put this on a limited PMC */
 #define PPMU_ONLY_COUNT_RUN     4       /* only counting in run state */
 
+struct pt_regs;
+extern unsigned long perf_misc_flags(struct pt_regs *regs);
+#define perf_misc_flags(regs)   perf_misc_flags(regs)
+
+extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+
 /*
  * The power_pmu.get_constraint function returns a 64-bit value and
  * a 64-bit mask that express the constraints between this event and
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index e8018d540e87..fb359b0a6937 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -492,11 +492,13 @@
 #define   MMCR0_FCHV    0x00000001UL /* freeze conditions in hypervisor mode */
 #define SPRN_MMCR1      798
 #define SPRN_MMCRA      0x312
+#define   MMCRA_SDSYNC  0x80000000UL /* SDAR synced with SIAR */
 #define   MMCRA_SIHV    0x10000000UL /* state of MSR HV when SIAR set */
 #define   MMCRA_SIPR    0x08000000UL /* state of MSR PR when SIAR set */
 #define   MMCRA_SLOT    0x07000000UL /* SLOT bits (37-39) */
 #define   MMCRA_SLOT_SHIFT      24
 #define   MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
+#define   POWER6_MMCRA_SDSYNC 0x0000080000000000ULL     /* SDAR/SIAR synced */
 #define   POWER6_MMCRA_SIHV   0x0000040000000000ULL
 #define   POWER6_MMCRA_SIPR   0x0000020000000000ULL
 #define   POWER6_MMCRA_THRM     0x00000020UL
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 8d4cafc84b82..6baae5a5c331 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -17,6 +17,7 @@
 #include <asm/pmc.h>
 #include <asm/machdep.h>
 #include <asm/firmware.h>
+#include <asm/ptrace.h>
 
 struct cpu_hw_counters {
         int n_counters;
@@ -310,7 +311,8 @@ static void power_pmu_read(struct perf_counter *counter)
  */
 static int is_limited_pmc(int pmcnum)
 {
-        return ppmu->limited_pmc5_6 && (pmcnum == 5 || pmcnum == 6);
+        return (ppmu->flags & PPMU_LIMITED_PMC5_6)
+                && (pmcnum == 5 || pmcnum == 6);
 }
 
 static void freeze_limited_counters(struct cpu_hw_counters *cpuhw,
@@ -860,7 +862,7 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
          * If this machine has limited counters, check whether this
          * event could go on a limited counter.
          */
-        if (ppmu->limited_pmc5_6) {
+        if (ppmu->flags & PPMU_LIMITED_PMC5_6) {
                 if (can_go_on_limited_pmc(counter, ev, flags)) {
                         flags |= PPMU_LIMITED_PMC_OK;
                 } else if (ppmu->limited_pmc_event(ev)) {
@@ -933,6 +935,7 @@ static void record_and_restart(struct perf_counter *counter, long val,
         u64 period = counter->hw.irq_period;
         s64 prev, delta, left;
         int record = 0;
+        u64 addr, mmcra, sdsync;
 
         /* we don't have to worry about interrupts here */
         prev = atomic64_read(&counter->hw.prev_count);
@@ -963,8 +966,76 @@ static void record_and_restart(struct perf_counter *counter, long val,
         /*
          * Finally record data if requested.
          */
-        if (record)
-                perf_counter_overflow(counter, nmi, regs, 0);
+        if (record) {
+                addr = 0;
+                if (counter->hw_event.record_type & PERF_RECORD_ADDR) {
+                        /*
+                         * The user wants a data address recorded.
+                         * If we're not doing instruction sampling,
+                         * give them the SDAR (sampled data address).
+                         * If we are doing instruction sampling, then only
+                         * give them the SDAR if it corresponds to the
+                         * instruction pointed to by SIAR; this is indicated
+                         * by the [POWER6_]MMCRA_SDSYNC bit in MMCRA.
+                         */
+                        mmcra = regs->dsisr;
+                        sdsync = (ppmu->flags & PPMU_ALT_SIPR) ?
+                                POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC;
+                        if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync))
+                                addr = mfspr(SPRN_SDAR);
+                }
+                perf_counter_overflow(counter, nmi, regs, addr);
+        }
+}
+
+/*
+ * Called from generic code to get the misc flags (i.e. processor mode)
+ * for an event.
+ */
+unsigned long perf_misc_flags(struct pt_regs *regs)
+{
+        unsigned long mmcra;
+
+        if (TRAP(regs) != 0xf00) {
+                /* not a PMU interrupt */
+                return user_mode(regs) ? PERF_EVENT_MISC_USER :
+                        PERF_EVENT_MISC_KERNEL;
+        }
+
+        mmcra = regs->dsisr;
+        if (ppmu->flags & PPMU_ALT_SIPR) {
+                if (mmcra & POWER6_MMCRA_SIHV)
+                        return PERF_EVENT_MISC_HYPERVISOR;
+                return (mmcra & POWER6_MMCRA_SIPR) ? PERF_EVENT_MISC_USER :
+                        PERF_EVENT_MISC_KERNEL;
+        }
+        if (mmcra & MMCRA_SIHV)
+                return PERF_EVENT_MISC_HYPERVISOR;
+        return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER :
+                        PERF_EVENT_MISC_KERNEL;
+}
+
+/*
+ * Called from generic code to get the instruction pointer
+ * for an event.
+ */
+unsigned long perf_instruction_pointer(struct pt_regs *regs)
+{
+        unsigned long mmcra;
+        unsigned long ip;
+        unsigned long slot;
+
+        if (TRAP(regs) != 0xf00)
+                return regs->nip;       /* not a PMU interrupt */
+
+        ip = mfspr(SPRN_SIAR);
+        mmcra = regs->dsisr;
+        if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) {
+                slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT;
+                if (slot > 1)
+                        ip += 4 * (slot - 1);
+        }
+        return ip;
 }
 
 /*
@@ -984,6 +1055,11 @@ static void perf_counter_interrupt(struct pt_regs *regs)
                                         mfspr(SPRN_PMC6));
 
         /*
+         * Overload regs->dsisr to store MMCRA so we only need to read it once.
+         */
+        regs->dsisr = mfspr(SPRN_MMCRA);
+
+        /*
          * If interrupts were soft-disabled when this PMU interrupt
          * occurred, treat it as an NMI.
          */
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
index 3ac0654372ab..c6cdfc165d6e 100644
--- a/arch/powerpc/kernel/power5+-pmu.c
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -625,6 +625,6 @@ struct power_pmu power5p_pmu = {
         .disable_pmc = power5p_disable_pmc,
         .n_generic = ARRAY_SIZE(power5p_generic_events),
         .generic_events = power5p_generic_events,
-        .limited_pmc5_6 = 1,
+        .flags = PPMU_LIMITED_PMC5_6,
         .limited_pmc_event = power5p_limited_pmc_event,
 };
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
index ab7c615c458d..cd4fbe06c35d 100644
--- a/arch/powerpc/kernel/power6-pmu.c
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -485,6 +485,6 @@ struct power_pmu power6_pmu = {
         .disable_pmc = p6_disable_pmc,
         .n_generic = ARRAY_SIZE(power6_generic_events),
         .generic_events = power6_generic_events,
-        .limited_pmc5_6 = 1,
+        .flags = PPMU_LIMITED_PMC5_6 | PPMU_ALT_SIPR,
         .limited_pmc_event = p6_limited_pmc_event,
 };