Blackfin arch: Apply Bluetchnix vendor patch provided by Harald Krapfenbauer

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

1 files changed, 40 insertions, 2 deletions

diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 1c5a86adfab7..a863522a4467 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -46,7 +46,7 @@ const char bfin_board_name[] = "Bluetechnix CM BF533";
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
-
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
         {
                 .name = "bootloader",
@@ -76,12 +76,15 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
         .enable_dma = 0,         /* use dma transfer with this chip*/
         .bits_per_word = 8,
 };
+#endif
 
 /* SPI ADC chip */
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
         .enable_dma = 1,         /* use dma transfer with this chip*/
         .bits_per_word = 16,
 };
+#endif
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@@ -90,7 +93,15 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+        .enable_dma = 1,
+        .bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
         {
                 /* the modalias must be the same as spi device driver name */
                 .modalias = "m25p80",       /* Name of spi_driver for this device */
@@ -100,7 +111,11 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .platform_data = &bfin_spi_flash_data,
                 .controller_data = &spi_flash_chip_info,
                 .mode = SPI_MODE_3,
-        }, {
+        },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+        {
                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,               /* Framework bus number */
@@ -108,6 +123,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .platform_data = NULL,      /* No spi_driver specific config */
                 .controller_data = &spi_adc_chip_info,
         },
+#endif
+
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
         {
                 .modalias = "ad1836-spi",
@@ -117,6 +134,27 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .controller_data = &ad1836_spi_chip_info,
         },
 #endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+        {
+                .modalias = "spi_mmc_dummy",
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 0,
+                .platform_data = NULL,
+                .controller_data = &spi_mmc_chip_info,
+                .mode = SPI_MODE_3,
+        },
+        {
+                .modalias = "spi_mmc",
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+                .platform_data = NULL,
+                .controller_data = &spi_mmc_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
 };
 
 /* SPI (0) */