Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits)
  bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.
  vlan: Calling vlan_hwaccel_do_receive() is always valid.
  tproxy: use the interface primary IP address as a default value for --on-ip
  tproxy: added IPv6 support to the socket match
  cxgb3: function namespace cleanup
  tproxy: added IPv6 support to the TPROXY target
  tproxy: added IPv6 socket lookup function to nf_tproxy_core
  be2net: Changes to use only priority codes allowed by f/w
  tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled
  tproxy: added tproxy sockopt interface in the IPV6 layer
  tproxy: added udp6_lib_lookup function
  tproxy: added const specifiers to udp lookup functions
  tproxy: split off ipv6 defragmentation to a separate module
  l2tp: small cleanup
  nf_nat: restrict ICMP translation for embedded header
  can: mcp251x: fix generation of error frames
  can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set
  can-raw: add msg_flags to distinguish local traffic
  9p: client code cleanup
  rds: make local functions/variables static
  ...

Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and
drivers/net/wireless/ath/ath9k/debug.c as per David

4 files changed, 64 insertions, 7 deletions

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b7d6df4e3cf9..41d6f549070c 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -25,7 +25,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
-#include <linux/spi/wl12xx.h>
+#include <linux/wl12xx.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/leds.h>
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9a5eb87425fc..ce28a851dcd3 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -14,7 +14,7 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/wl12xx.h>
+#include <linux/wl12xx.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl.h>
 #include <linux/clk.h>
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 6b3984964cc5..189a6d1600b2 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -16,6 +16,8 @@
 #include <linux/gpio.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/wl12xx.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -27,6 +29,9 @@
 #include "mux.h"
 #include "hsmmc.h"
 
+#define OMAP_ZOOM_WLAN_PMENA_GPIO       (101)
+#define OMAP_ZOOM_WLAN_IRQ_GPIO         (162)
+
 /* Zoom2 has Qwerty keyboard*/
 static int board_keymap[] = {
         KEY(0, 0, KEY_E),
@@ -106,6 +111,11 @@ static struct regulator_consumer_supply zoom_vmmc2_supply = {
         .supply         = "vmmc",
 };
 
+static struct regulator_consumer_supply zoom_vmmc3_supply = {
+        .supply         = "vmmc",
+        .dev_name       = "mmci-omap-hs.2",
+};
+
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data zoom_vmmc1 = {
         .constraints = {
@@ -151,6 +161,38 @@ static struct regulator_init_data zoom_vsim = {
         .consumer_supplies      = &zoom_vsim_supply,
 };
 
+static struct regulator_init_data zoom_vmmc3 = {
+        .constraints = {
+                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+        },
+        .num_consumer_supplies  = 1,
+        .consumer_supplies = &zoom_vmmc3_supply,
+};
+
+static struct fixed_voltage_config zoom_vwlan = {
+        .supply_name            = "vwl1271",
+        .microvolts             = 1800000, /* 1.8V */
+        .gpio                   = OMAP_ZOOM_WLAN_PMENA_GPIO,
+        .startup_delay          = 70000, /* 70msec */
+        .enable_high            = 1,
+        .enabled_at_boot        = 0,
+        .init_data              = &zoom_vmmc3,
+};
+
+static struct platform_device omap_vwlan_device = {
+        .name           = "reg-fixed-voltage",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &zoom_vwlan,
+        },
+};
+
+struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
+        .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
+        /* ZOOM ref clock is 26 MHz */
+        .board_ref_clock = 1,
+};
+
 static struct omap2_hsmmc_info mmc[] __initdata = {
         {
                 .name           = "external",
@@ -168,6 +210,14 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
                 .nonremovable   = true,
                 .power_saving   = true,
         },
+        {
+                .name           = "wl1271",
+                .mmc            = 3,
+                .caps           = MMC_CAP_4_BIT_DATA,
+                .gpio_wp        = -EINVAL,
+                .gpio_cd        = -EINVAL,
+                .nonremovable   = true,
+        },
         {}      /* Terminator */
 };
 
@@ -279,7 +329,11 @@ static void enable_board_wakeup_source(void)
 
 void __init zoom_peripherals_init(void)
 {
+        if (wl12xx_set_platform_data(&omap_zoom_wlan_data))
+                pr_err("error setting wl12xx data\n");
+
         omap_i2c_init();
+        platform_device_register(&omap_vwlan_device);
         usb_musb_init(&musb_board_data);
         enable_board_wakeup_source();
 }
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index 2ba630276295..46e96bc1f5a1 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -360,6 +360,7 @@ struct qdio_initialize {
         unsigned int no_output_qs;
         qdio_handler_t *input_handler;
         qdio_handler_t *output_handler;
+        void (*queue_start_poll) (struct ccw_device *, int, unsigned long);
         unsigned long int_parm;
         void **input_sbal_addr_array;
         void **output_sbal_addr_array;
@@ -377,11 +378,13 @@ struct qdio_initialize {
 extern int qdio_allocate(struct qdio_initialize *);
 extern int qdio_establish(struct qdio_initialize *);
 extern int qdio_activate(struct ccw_device *);
-
-extern int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
-                   int q_nr, unsigned int bufnr, unsigned int count);
-extern int qdio_shutdown(struct ccw_device*, int);
+extern int do_QDIO(struct ccw_device *, unsigned int, int, unsigned int,
+                   unsigned int);
+extern int qdio_start_irq(struct ccw_device *, int);
+extern int qdio_stop_irq(struct ccw_device *, int);
+extern int qdio_get_next_buffers(struct ccw_device *, int, int *, int *);
+extern int qdio_shutdown(struct ccw_device *, int);
 extern int qdio_free(struct ccw_device *);
-extern int qdio_get_ssqd_desc(struct ccw_device *dev, struct qdio_ssqd_desc*);
+extern int qdio_get_ssqd_desc(struct ccw_device *, struct qdio_ssqd_desc *);
 
 #endif /* __QDIO_H__ */