Merge tag 'omap-for-v3.8/cleanup-headers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/headers

From Tony Lindgren <tony@atomide.com>: This is the first set of omap cleanup patches for v3.8 merge window to remove most of the remaining plat includes to get us closer to ARM common zImage support. To avoid a huge amount of trivial merge conflicts with includes, this branch is based on several small topic branches coordinated with the driver subsystem maintainers. These branches are based on v3.7-rc1 and can also be merged into the related driver subsystem branches as needed: omap-for-v3.8/cleanup-headers-prepare few trivial driver changes omap-for-v3.8/cleanup-headers-dma move of the DMA header omap-for-v3.8/cleanup-headers-gpmc GPMC and MTD changes omap-for-v3.8/cleanup-headers-mmc MMC related changes omap-for-v3.8/cleanup-headers-dss DSS related changes omap-for-v3.8/cleanup-headers-asoc ASoC related changes Note that for the dma-omap.h, it was decided that it should be is completed. For the related discussion, please see: https://patchwork.kernel.org/patch/1519591/# After these patches we still have a few plat headers remaining that will be handled in later pull requests. * tag 'omap-for-v3.8/cleanup-headers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (58 commits) ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 ARM: OMAP: clock: split plat/clkdev_omap.h into OMAP1/2 files ARM: OMAP: remove plat/clock.h ARM: OMAP: duplicate plat-omap/clock.c into mach-omap[12]/clock.c ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2 ARM: OMAP2+: Move omap_reserve() locally to mach-omap2 ARM: OMAP1: Remove omap_reserve() callback for all omap1 boards ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 ARM: OMAP: Merge plat/multi.h into plat/cpu.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 ARM: OMAP: Make omap_device local to mach-omap2 ARM: OMAP: Make plat/sram.h local to plat-omap ARM: OMAP: Move plat/led.h to include/linux/platform_data ARM: OMAP: Make plat/common.h local to mach-omap1 and mach-omap2 ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2 ARM: OMAP2+: Make board-zoom.h local ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1 ARM: OMAP: Make plat/fpga.h local to arch/arm/plat-omap ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h OMAPFB: use omap_vrfb_supported() ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
author: Arnd Bergmann <arnd@arndb.de> 2012-10-26 09:54:14 -0400
committer: Arnd Bergmann <arnd@arndb.de> 2012-10-26 09:54:14 -0400
commit: 148a8698763130c96004ef419b5f0d44a93d413c (patch)
tree: 48a3ea5484e3fc9e485d7bb1b0e3d8795c67d368 /arch
parent: ddffeb8c4d0331609ef2581d84de4d763607bd37 (diff)
parent: e4c060db2c13f10de09101afc564763f9fd0019a (diff)
220 files changed, 3870 insertions, 3885 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 9518bf5996dc..e50b02249b32 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -613,7 +613,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
        .atag_offset    = 0x100,
        .map_io         = ams_delta_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = ams_delta_init,
        .init_late      = ams_delta_init_late,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 4b6de70c47a6..8b5800acf726 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -27,10 +27,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
 #include <mach/flash.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <mach/hardware.h>
@@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = {
 static void __init fsample_init_smc91x(void)
 {
-        fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+        __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
        mdelay(50);
-        fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+        __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
                   H2P2_DBG_FPGA_LAN_RESET);
        mdelay(50);
 }
@@ -362,7 +362,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
        .atag_offset    = 0x100,
        .map_io         = omap_fsample_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_fsample_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 4ec579fdd366..608e7d2a2778 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
        .atag_offset    = 0x100,
        .map_io         = omap16xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_generic_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index e1362ce48497..7119ef28e0ad 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -13,12 +13,11 @@
 */
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <linux/i2c/tps65010.h>
-#include <plat/mmc.h>
 #include "board-h2.h"
+#include "mmc.h"
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 376f7f29ef77..9134b646f01b 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -39,8 +39,8 @@
 #include <asm/mach/map.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <mach/flash.h>
@@ -50,6 +50,7 @@
 #include "common.h"
 #include "board-h2.h"
+#include "dma.h"
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define OMAP1610_ETHR_START             0x04000300
@@ -458,7 +459,6 @@ MACHINE_START(OMAP_H2, "TI-H2")
        .atag_offset    = 0x100,
        .map_io         = omap16xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = h2_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index c74daace8cd6..17d77914d769 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -16,9 +16,8 @@
 #include <linux/i2c/tps65010.h>
-#include <plat/mmc.h>
 #include "board-h3.h"
+#include "mmc.h"
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index ededdb7ef28c..bf213d1d8075 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/flash.h>
 #include <mach/hardware.h>
@@ -452,7 +452,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
        .atag_offset    = 0x100,
        .map_io         = omap16xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = h3_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 87ab2086ef96..356f816c84a6 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -43,7 +43,7 @@
 #include <asm/mach/arch.h>
 #include <mach/omap7xx.h>
-#include <plat/mmc.h>
+#include "mmc.h"
 #include <mach/irqs.h>
 #include <mach/usb.h>
@@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald")
        .atag_offset    = 0x100,
        .map_io         = htcherald_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = htcherald_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index db5f7d2976e7..c66334f22471 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -33,16 +33,16 @@
 #include <mach/mux.h>
 #include <mach/flash.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <plat/mmc.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
 #include "iomap.h"
 #include "common.h"
+#include "mmc.h"
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START        0x04000300
@@ -215,7 +215,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
 static int innovator_get_pendown_state(void)
 {
-        return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+        return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
 }
 static const struct ads7846_platform_data innovator1510_ts_info = {
@@ -279,7 +279,7 @@ static struct platform_device *innovator1610_devices[] __initdata = {
 static void __init innovator_init_smc91x(void)
 {
        if (cpu_is_omap1510()) {
-                fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+                __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
                           OMAP1510_FPGA_RST);
                udelay(750);
        } else {
@@ -335,10 +335,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on,
                                int vdd)
 {
        if (power_on)
-                fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+                __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
                                OMAP1510_FPGA_POWER);
        else
-                fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+                __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
                                OMAP1510_FPGA_POWER);
        return 0;
@@ -390,14 +390,14 @@ static void __init innovator_init(void)
                omap_cfg_reg(UART3_TX);
                omap_cfg_reg(UART3_RX);
-                reg = fpga_read(OMAP1510_FPGA_POWER);
+                reg = __raw_readb(OMAP1510_FPGA_POWER);
                reg |= OMAP1510_FPGA_PCR_COM1_EN;
-                fpga_write(reg, OMAP1510_FPGA_POWER);
+                __raw_writeb(reg, OMAP1510_FPGA_POWER);
                udelay(10);
-                reg = fpga_read(OMAP1510_FPGA_POWER);
+                reg = __raw_readb(OMAP1510_FPGA_POWER);
                reg |= OMAP1510_FPGA_PCR_COM2_EN;
-                fpga_write(reg, OMAP1510_FPGA_POWER);
+                __raw_writeb(reg, OMAP1510_FPGA_POWER);
                udelay(10);
                platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
@@ -437,6 +437,7 @@ static void __init innovator_init(void)
 */
 static void __init innovator_map_io(void)
 {
+#ifdef CONFIG_ARCH_OMAP15XX
        omap15xx_map_io();
        iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
@@ -444,9 +445,10 @@ static void __init innovator_map_io(void)
        /* Dump the Innovator FPGA rev early - useful info for support. */
        pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
-                        fpga_read(OMAP1510_FPGA_REV_HIGH),
+                        __raw_readb(OMAP1510_FPGA_REV_HIGH),
-                        fpga_read(OMAP1510_FPGA_REV_LOW),
+                        __raw_readb(OMAP1510_FPGA_REV_LOW),
-                        fpga_read(OMAP1510_FPGA_BOARD_REV));
+                        __raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
 }
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
@@ -454,7 +456,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
        .atag_offset    = 0x100,
        .map_io         = innovator_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = innovator_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7d5c06d6a52a..3e8ead67e459 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -29,13 +29,13 @@
 #include <asm/mach/map.h>
 #include <mach/mux.h>
-#include <plat/mmc.h>
-#include <plat/clock.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
 #include "common.h"
+#include "clock.h"
+#include "mmc.h"
 #define ADS7846_PENDOWN_GPIO    15
@@ -251,7 +251,6 @@ MACHINE_START(NOKIA770, "Nokia 770")
        .atag_offset    = 0x100,
        .map_io         = omap16xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_nokia770_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5973945a8741..872ea47cd28a 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -48,7 +48,7 @@
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
        .atag_offset    = 0x100,
        .map_io         = omap16xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = osk_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 1c578d58923a..584b6fab894b 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -36,8 +36,8 @@
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 #include "common.h"
+#include "dma.h"
 #define PALMTE_USBDETECT_GPIO   0
 #define PALMTE_USB_OR_DC_GPIO   1
@@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
        .atag_offset    = 0x100,
        .map_io         = omap15xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_palmte_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 97158095083c..fbc986bfe69e 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -28,16 +28,16 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/leds-omap.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/led.h>
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 #include "common.h"
+#include "dma.h"
 #define PALMTT_USBDETECT_GPIO   0
 #define PALMTT_CABLE_GPIO       1
@@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
        .atag_offset    = 0x100,
        .map_io         = omap15xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_palmtt_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e311032e7eeb..60d917a93763 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -38,8 +38,8 @@
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
@@ -47,6 +47,7 @@
 #include <mach/usb.h>
 #include "common.h"
+#include "dma.h"
 #define PALMZ71_USBDETECT_GPIO  0
 #define PALMZ71_PENIRQ_GPIO     6
@@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
        .atag_offset    = 0x100,
        .map_io         = omap15xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_palmz71_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 198b05417bfc..030bd48727be 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -28,9 +28,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <mach/flash.h>
 #include <mach/hardware.h>
@@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
 static void __init perseus2_init_smc91x(void)
 {
-        fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+        __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
        mdelay(50);
-        fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+        __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
                   H2P2_DBG_FPGA_LAN_RESET);
        mdelay(50);
 }
@@ -324,7 +324,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
        .atag_offset    = 0x100,
        .map_io         = omap_perseus2_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_perseus2_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 5932d56e17bf..4fcf19c78a08 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -16,9 +16,10 @@
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
-#include <plat/mmc.h>
 #include <mach/board-sx1.h>
+#include "mmc.h"
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 13bf2cc56814..1ebc7e08d6e5 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -36,15 +36,16 @@
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/irda.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/board-sx1.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
 #include "common.h"
+#include "dma.h"
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
@@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
        .atag_offset    = 0x100,
        .map_io         = omap15xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_sx1_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index ad75e3411d46..abf705f49b19 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -34,7 +34,7 @@
 #include <mach/board-voiceblue.h>
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
        .atag_offset    = 0x100,
        .map_io         = omap15xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = voiceblue_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 638f4070fc70..9e74aa664acb 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -12,6 +12,7 @@
 * published by the Free Software Foundation.
 */
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -21,14 +22,13 @@
 #include <asm/mach-types.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <plat/usb.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/clkdev_omap.h>
 #include <mach/hardware.h>
+#include "../plat-omap/sram.h"
 #include "iomap.h"
 #include "clock.h"
 #include "opp.h"
@@ -36,6 +36,10 @@
 __u32 arm_idlect1_mask;
 struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
 /*
 * Omap1 specific clock functions
 */
@@ -607,3 +611,497 @@ void omap1_clk_disable_unused(struct clk *clk)
 }
 #endif
+int clk_enable(struct clk *clk)
+{
+        unsigned long flags;
+        int ret;
+        if (clk == NULL || IS_ERR(clk))
+                return -EINVAL;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap1_clk_enable(clk);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+void clk_disable(struct clk *clk)
+{
+        unsigned long flags;
+        if (clk == NULL || IS_ERR(clk))
+                return;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        if (clk->usecount == 0) {
+                pr_err("Trying disable clock %s with 0 usecount\n",
+                       clk->name);
+                WARN_ON(1);
+                goto out;
+        }
+        omap1_clk_disable(clk);
+out:
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+unsigned long clk_get_rate(struct clk *clk)
+{
+        unsigned long flags;
+        unsigned long ret;
+        if (clk == NULL || IS_ERR(clk))
+                return 0;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = clk->rate;
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long flags;
+        long ret;
+        if (clk == NULL || IS_ERR(clk))
+                return 0;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap1_clk_round_rate(clk, rate);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long flags;
+        int ret = -EINVAL;
+        if (clk == NULL || IS_ERR(clk))
+                return ret;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap1_clk_set_rate(clk, rate);
+        if (ret == 0)
+                propagate_rate(clk);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
+        return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+struct clk *clk_get_parent(struct clk *clk)
+{
+        return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+int __initdata mpurate;
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+        get_option(&str, &mpurate);
+        if (!mpurate)
+                return 1;
+        if (mpurate < 1000)
+                mpurate *= 1000000;
+        return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+        return clk->parent->rate;
+}
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+        WARN_ON(!clk->fixed_div);
+        return clk->parent->rate / clk->fixed_div;
+}
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+        list_del_init(&child->sibling);
+        if (parent)
+                list_add(&child->sibling, &parent->children);
+        child->parent = parent;
+        /* now do the debugfs renaming to reattach the child
+           to the proper parent */
+}
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &tclk->children, sibling) {
+                if (clkp->recalc)
+                        clkp->rate = clkp->recalc(clkp);
+                propagate_rate(clkp);
+        }
+}
+static LIST_HEAD(root_clks);
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &root_clks, sibling) {
+                if (clkp->recalc)
+                        clkp->rate = clkp->recalc(clkp);
+                propagate_rate(clkp);
+        }
+}
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run.  No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+        INIT_LIST_HEAD(&clk->children);
+}
+int clk_register(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return -EINVAL;
+        /*
+         * trap out already registered clocks
+         */
+        if (clk->node.next || clk->node.prev)
+                return 0;
+        mutex_lock(&clocks_mutex);
+        if (clk->parent)
+                list_add(&clk->sibling, &clk->parent->children);
+        else
+                list_add(&clk->sibling, &root_clks);
+        list_add(&clk->node, &clocks);
+        if (clk->init)
+                clk->init(clk);
+        mutex_unlock(&clocks_mutex);
+        return 0;
+}
+EXPORT_SYMBOL(clk_register);
+void clk_unregister(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return;
+        mutex_lock(&clocks_mutex);
+        list_del(&clk->sibling);
+        list_del(&clk->node);
+        mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+void clk_enable_init_clocks(void)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &clocks, node)
+                if (clkp->flags & ENABLE_ON_INIT)
+                        clk_enable(clkp);
+}
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name.  Assumes that struct clk
+ * names are unique.  Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+        struct clk *c;
+        struct clk *ret = NULL;
+        mutex_lock(&clocks_mutex);
+        list_for_each_entry(c, &clocks, node) {
+                if (!strcmp(c->name, name)) {
+                        ret = c;
+                        break;
+                }
+        }
+        mutex_unlock(&clocks_mutex);
+        return ret;
+}
+int omap_clk_enable_autoidle_all(void)
+{
+        struct clk *c;
+        unsigned long flags;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(c, &clocks, node)
+                if (c->ops->allow_idle)
+                        c->ops->allow_idle(c);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+int omap_clk_disable_autoidle_all(void)
+{
+        struct clk *c;
+        unsigned long flags;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(c, &clocks, node)
+                if (c->ops->deny_idle)
+                        c->ops->deny_idle(c);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+        return 0;
+}
+static void clkll_disable_null(struct clk *clk)
+{
+}
+const struct clkops clkops_null = {
+        .enable         = clkll_enable_null,
+        .disable        = clkll_disable_null,
+};
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+        .name   = "dummy",
+        .ops    = &clkops_null,
+};
+/*
+ *
+ */
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+        struct clk *ck;
+        unsigned long flags;
+        pr_info("clock: disabling unused clocks to save power\n");
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(ck, &clocks, node) {
+                if (ck->ops == &clkops_null)
+                        continue;
+                if (ck->usecount > 0 || !ck->enable_reg)
+                        continue;
+                omap1_clk_disable_unused(ck);
+        }
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ *      debugfs support to trace clock tree hierarchy and attributes
+ */
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+static struct dentry *clk_debugfs_root;
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+        struct clk *c;
+        struct clk *pa;
+        mutex_lock(&clocks_mutex);
+        seq_printf(s, "%-30s %-30s %-10s %s\n",
+                   "clock-name", "parent-name", "rate", "use-count");
+        list_for_each_entry(c, &clocks, node) {
+                pa = c->parent;
+                seq_printf(s, "%-30s %-30s %-10lu %d\n",
+                           c->name, pa ? pa->name : "none", c->rate,
+                           c->usecount);
+        }
+        mutex_unlock(&clocks_mutex);
+        return 0;
+}
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+static const struct file_operations debug_clock_fops = {
+        .open           = clk_dbg_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+};
+static int clk_debugfs_register_one(struct clk *c)
+{
+        int err;
+        struct dentry *d;
+        struct clk *pa = c->parent;
+        d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+        if (!d)
+                return -ENOMEM;
+        c->dent = d;
+        d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        return 0;
+err_out:
+        debugfs_remove_recursive(c->dent);
+        return err;
+}
+static int clk_debugfs_register(struct clk *c)
+{
+        int err;
+        struct clk *pa = c->parent;
+        if (pa && !pa->dent) {
+                err = clk_debugfs_register(pa);
+                if (err)
+                        return err;
+        }
+        if (!c->dent) {
+                err = clk_debugfs_register_one(c);
+                if (err)
+                        return err;
+        }
+        return 0;
+}
+static int __init clk_debugfs_init(void)
+{
+        struct clk *c;
+        struct dentry *d;
+        int err;
+        d = debugfs_create_dir("clock", NULL);
+        if (!d)
+                return -ENOMEM;
+        clk_debugfs_root = d;
+        list_for_each_entry(c, &clocks, node) {
+                err = clk_debugfs_register(c);
+                if (err)
+                        goto err_out;
+        }
+        d = debugfs_create_file("summary", S_IRUGO,
+                d, NULL, &debug_clock_fops);
+        if (!d)
+                return -ENOMEM;
+        return 0;
+err_out:
+        debugfs_remove_recursive(clk_debugfs_root);
+        return err;
+}
+late_initcall(clk_debugfs_init);
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 3d04f4f67676..1e4918a3a5ee 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -14,8 +14,184 @@
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 #include <linux/clk.h>
+#include <linux/list.h>
-#include <plat/clock.h>
+#include <linux/clkdev.h>
+struct module;
+struct clk;
+struct omap_clk {
+        u16                             cpu;
+        struct clk_lookup               lk;
+};
+#define CLK(dev, con, ck, cp)           \
+        {                               \
+                 .cpu = cp,             \
+                .lk = {                 \
+                        .dev_id = dev,  \
+                        .con_id = con,  \
+                        .clk = ck,      \
+                },                      \
+        }
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_310          (1 << 0)
+#define CK_7XX          (1 << 1)        /* 7xx, 850 */
+#define CK_1510         (1 << 2)
+#define CK_16XX         (1 << 3)        /* 16xx, 17xx, 5912 */
+#define CK_1710         (1 << 4)        /* 1710 extra for rate selection */
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk)     (clk->name)
+#define __clk_get_parent(clk)   (clk->parent)
+#define __clk_get_rate(clk)     (clk->rate)
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware.  Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+        int                     (*enable)(struct clk *);
+        void                    (*disable)(struct clk *);
+        void                    (*find_idlest)(struct clk *, void __iomem **,
+                                               u8 *, u8 *);
+        void                    (*find_companion)(struct clk *, void __iomem **,
+                                                  u8 *);
+        void                    (*allow_idle)(struct clk *);
+        void                    (*deny_idle)(struct clk *);
+};
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT        (1 << 0)        /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL      (1 << 1)
+#define CLOCK_NO_IDLE_PARENT    (1 << 2)
+#define ENABLE_ON_INIT          (1 << 3)        /* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 4)        /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2          (1 << 5)
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named.  It should be "enable_count" or
+ * something similar.  "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals.  (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+        struct list_head        node;
+        const struct clkops     *ops;
+        const char              *name;
+        struct clk              *parent;
+        struct list_head        children;
+        struct list_head        sibling;        /* node for children */
+        unsigned long           rate;
+        void __iomem            *enable_reg;
+        unsigned long           (*recalc)(struct clk *);
+        int                     (*set_rate)(struct clk *, unsigned long);
+        long                    (*round_rate)(struct clk *, unsigned long);
+        void                    (*init)(struct clk *);
+        u8                      enable_bit;
+        s8                      usecount;
+        u8                      fixed_div;
+        u8                      flags;
+        u8                      rate_offset;
+        u8                      src_offset;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+        struct dentry           *dent;  /* For visible tree hierarchy */
+#endif
+};
+struct clk_functions {
+        int             (*clk_enable)(struct clk *clk);
+        void            (*clk_disable)(struct clk *clk);
+        long            (*clk_round_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_parent)(struct clk *clk, struct clk *parent);
+        void            (*clk_allow_idle)(struct clk *clk);
+        void            (*clk_deny_idle)(struct clk *clk);
+        void            (*clk_disable_unused)(struct clk *clk);
+};
+extern int mpurate;
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+extern const struct clkops clkops_null;
+extern struct clk dummy_ck;
 int omap1_clk_init(void);
 void omap1_clk_late_init(void);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 9b45f4b0ee22..28aea55a412e 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,14 +22,13 @@
 #include <asm/mach-types.h>  /* for machine_is_* */
-#include <plat/clock.h>
+#include "soc.h"
-#include <plat/cpu.h>
-#include <plat/clkdev_omap.h>
-#include <plat/sram.h>  /* for omap_sram_reprogram_clock() */
 #include <mach/hardware.h>
 #include <mach/usb.h>   /* for OTG_BASE */
+#include "../plat-omap/sram.h"
 #include "iomap.h"
 #include "clock.h"
@@ -765,14 +764,6 @@ static struct omap_clk omap_clks[] = {
 * init
 */
-static struct clk_functions omap1_clk_functions = {
-        .clk_enable             = omap1_clk_enable,
-        .clk_disable            = omap1_clk_disable,
-        .clk_round_rate         = omap1_clk_round_rate,
-        .clk_set_rate           = omap1_clk_set_rate,
-        .clk_disable_unused     = omap1_clk_disable_unused,
-};
 static void __init omap1_show_rates(void)
 {
        pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
@@ -803,8 +794,6 @@ int __init omap1_clk_init(void)
        if (!cpu_is_omap15xx())
                omap_writew(0, SOFT_REQ_REG2);
-        clk_init(&omap1_clk_functions);
        /* By default all idlect1 clocks are allowed to idle */
        arm_idlect1_mask = ~0;
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index c2552b24f9f2..26e19d3b7924 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -26,8 +26,11 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
 #define __ARCH_ARM_MACH_OMAP1_COMMON_H
-#include <plat/common.h>
+#include "../plat-omap/common.h"
 #include <linux/mtd/mtd.h>
+#include <linux/i2c-omap.h>
+#include "../plat-omap/i2c.h"
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
@@ -38,6 +41,7 @@ static inline void omap7xx_map_io(void)
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
+void omap1510_fpga_init_irq(void);
 void omap15xx_map_io(void);
 #else
 static inline void omap15xx_map_io(void)
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index d3fec92c54cb..645668e2b1d5 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -19,17 +19,19 @@
 #include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
 #include <mach/omap7xx.h>
 #include <mach/camera.h>
 #include <mach/hardware.h>
+#include "../plat-omap/sram.h"
 #include "common.h"
 #include "clock.h"
+#include "dma.h"
+#include "mmc.h"
 #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
@@ -175,6 +177,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base,
        res[3].name = "tx";
        res[3].flags = IORESOURCE_DMA;
+        if (cpu_is_omap7xx())
+                data->slots[0].features = MMC_OMAP7XX;
+        if (cpu_is_omap15xx())
+                data->slots[0].features = MMC_OMAP15XX;
+        if (cpu_is_omap16xx())
+                data->slots[0].features = MMC_OMAP16XX;
        ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
        if (ret == 0)
                ret = platform_device_add_data(pdev, data, sizeof(*data));
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 29007fef84cd..71305c15fbd5 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -25,11 +25,13 @@
 #include <linux/device.h>
 #include <linux/io.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irqs.h>
+#include "dma.h"
 #define OMAP1_DMA_BASE                  (0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT      17
 #define OMAP1_DMA_STRIDE                0x40
diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h
new file mode 100644
index 000000000000..da6345dab03f
--- /dev/null
+++ b/arch/arm/mach-omap1/dma.h
@@ -0,0 +1,83 @@
+/*
+ *  OMAP1 DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __OMAP1_DMA_CHANNEL_H
+#define __OMAP1_DMA_CHANNEL_H
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE              0
+#define OMAP_DMA_MCSI1_TX               1
+#define OMAP_DMA_MCSI1_RX               2
+#define OMAP_DMA_I2C_RX                 3
+#define OMAP_DMA_I2C_TX                 4
+#define OMAP_DMA_EXT_NDMA_REQ           5
+#define OMAP_DMA_EXT_NDMA_REQ2          6
+#define OMAP_DMA_UWIRE_TX               7
+#define OMAP_DMA_MCBSP1_TX              8
+#define OMAP_DMA_MCBSP1_RX              9
+#define OMAP_DMA_MCBSP3_TX              10
+#define OMAP_DMA_MCBSP3_RX              11
+#define OMAP_DMA_UART1_TX               12
+#define OMAP_DMA_UART1_RX               13
+#define OMAP_DMA_UART2_TX               14
+#define OMAP_DMA_UART2_RX               15
+#define OMAP_DMA_MCBSP2_TX              16
+#define OMAP_DMA_MCBSP2_RX              17
+#define OMAP_DMA_UART3_TX               18
+#define OMAP_DMA_UART3_RX               19
+#define OMAP_DMA_CAMERA_IF_RX           20
+#define OMAP_DMA_MMC_TX                 21
+#define OMAP_DMA_MMC_RX                 22
+#define OMAP_DMA_NAND                   23
+#define OMAP_DMA_IRQ_LCD_LINE           24
+#define OMAP_DMA_MEMORY_STICK           25
+#define OMAP_DMA_USB_W2FC_RX0           26
+#define OMAP_DMA_USB_W2FC_RX1           27
+#define OMAP_DMA_USB_W2FC_RX2           28
+#define OMAP_DMA_USB_W2FC_TX0           29
+#define OMAP_DMA_USB_W2FC_TX1           30
+#define OMAP_DMA_USB_W2FC_TX2           31
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN          32
+#define OMAP_DMA_SPI_TX                 33
+#define OMAP_DMA_SPI_RX                 34
+#define OMAP_DMA_CRYPTO_HASH            35
+#define OMAP_DMA_CCP_ATTN               36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY     37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0      38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0      39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1      40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1      41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2      42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2      43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3      44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3      45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4      46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4      47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5      48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5      49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6      50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6      51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7      52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7      53
+#define OMAP_DMA_MMC2_TX                54
+#define OMAP_DMA_MMC2_RX                55
+#define OMAP_DMA_CRYPTO_DES_OUT         56
+#endif /* __OMAP1_DMA_CHANNEL_H */
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 73ae6169aa4a..b3fb531af94e 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -10,7 +10,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/flash.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 29ec50fc688d..4ec220d8da5c 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -27,7 +27,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index a0551a6d7451..32bcbb8d6c73 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -19,11 +19,25 @@
 *
 */
-#include <plat/i2c.h>
+#include <linux/i2c-omap.h>
 #include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
-void __init omap1_i2c_mux_pins(int bus_id)
+#include "../plat-omap/i2c.h"
+#define OMAP_I2C_SIZE           0x3f
+#define OMAP1_I2C_BASE          0xfffb3800
+#define OMAP1_INT_I2C           (32 + 4)
+static const char name[] = "omap_i2c";
+static struct resource i2c_resources[2] = {
+};
+static struct platform_device omap_i2c_devices[1] = {
+};
+static void __init omap1_i2c_mux_pins(int bus_id)
 {
        if (cpu_is_omap7xx()) {
                omap_cfg_reg(I2C_7XX_SDA);
@@ -33,3 +47,44 @@ void __init omap1_i2c_mux_pins(int bus_id)
                omap_cfg_reg(I2C_SCL);
        }
 }
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
+                                int bus_id)
+{
+        struct platform_device *pdev;
+        struct resource *res;
+        omap1_i2c_mux_pins(bus_id);
+        pdev = &omap_i2c_devices[bus_id - 1];
+        pdev->id = bus_id;
+        pdev->name = name;
+        pdev->num_resources = ARRAY_SIZE(i2c_resources);
+        res = i2c_resources;
+        res[0].start = OMAP1_I2C_BASE;
+        res[0].end = res[0].start + OMAP_I2C_SIZE;
+        res[0].flags = IORESOURCE_MEM;
+        res[1].start = OMAP1_INT_I2C;
+        res[1].flags = IORESOURCE_IRQ;
+        pdev->resource = res;
+        /* all OMAP1 have IP version 1 register set */
+        pdata->rev = OMAP_I2C_IP_VERSION_1;
+        /* all OMAP1 I2C are implemented like this */
+        pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+                       OMAP_I2C_FLAG_SIMPLE_CLOCK |
+                       OMAP_I2C_FLAG_16BIT_DATA_REG |
+                       OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+        /* how the cpu bus is wired up differs for 7xx only */
+        if (cpu_is_omap7xx())
+                pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+        else
+                pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+        pdev->dev.platform_data = pdata;
+        return platform_device_register(pdev);
+}
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index a1b846aacdaf..52de382fc804 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <asm/system_info.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 84248d250adb..f9989d38c464 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -39,7 +39,7 @@
 #include <asm/sizes.h>
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
-#include <plat/cpu.h>
+#include "../../mach-omap1/soc.h"
 /*
 * NOTE: Please use ioremap + __raw_read/write where possible instead of these
@@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa);
 extern void omap_writew(u16 v, u32 pa);
 extern void omap_writel(u32 v, u32 pa);
-#include <plat/tc.h>
+#include <mach/tc.h>
 /* Almost all documentation for chip and board memory maps assumes
 * BM is clear.  Most devel boards have a switch to control booting
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 901082def9bd..351ae4f2c514 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -19,7 +19,7 @@
 * because of the strncmp().
 */
 #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <plat/cpu.h>
+#include "../../mach-omap1/soc.h"
 /*
 * OMAP-1510 Local Bus address offset
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index 8fe05d6137c0..3d235244bf5c 100644
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -45,5 +45,118 @@
 #define OMAP1510_DSP_MMU_BASE   (0xfffed200)
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE              0xE8000000              /* VA */
+#define OMAP1510_FPGA_SIZE              SZ_4K
+#define OMAP1510_FPGA_START             0x08000000              /* PA */
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW                   IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH                  IOMEM(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL         IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT                 IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI                  IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER                     IOMEM(OMAP1510_FPGA_BASE + 0x5)
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO                    IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI                    IOMEM(OMAP1510_FPGA_BASE + 0x7)
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO                    IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI                    IOMEM(OMAP1510_FPGA_BASE + 0x9)
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET                IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST                       IOMEM(OMAP1510_FPGA_BASE + 0xb)
+#define OMAP1510_FPGA_AUDIO                     IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP                       IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO                   IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1                     IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2                     IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS           IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV                 IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL          IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define OMAP1510P1_PPT_DATA                     IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS                   IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL                  IOMEM(OMAP1510_FPGA_BASE + 0x102)
+#define OMAP1510_FPGA_TOUCHSCREEN               IOMEM(OMAP1510_FPGA_BASE + 0x204)
+#define INNOVATOR_FPGA_INFO                     IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO            IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI            IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO               IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI               IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO               IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI               IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_EXP_CONTROL              IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2                     IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2                     IOMEM(OMAP1510_FPGA_BASE + 0x210)
+#define OMAP1510_FPGA_ETHR_START                (OMAP1510_FPGA_START + 0x300)
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE               0x42
+#define OMAP1510_FPGA_PCR_IF_PD0                (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN               (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN               (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0               (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1               (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK             (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK              (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0            (1 << 0)
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK  (1<<0)  /* output */
+#define OMAP1510_FPGA_HID_MOSI  (1<<1)  /* output */
+#define OMAP1510_FPGA_HID_nSS   (1<<2)  /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3)  /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO  (1<<4)  /* input */
+#define OMAP1510_FPGA_HID_ATN   (1<<5)  /* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA               (IH_GPIO_BASE + 13)
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN           (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK           (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2              (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3              (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4              (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5              (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6              (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7              (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8              (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9              (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10             (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11             (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12             (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER              (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1          (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2          (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS            (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17             (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM           (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A         (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B         (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD            (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22             (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23             (OMAP_FPGA_IRQ_BASE + 23)
 #endif /*  __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/mach-omap1/include/mach/tc.h
index 1b4b2da86203..1b4b2da86203 100644
--- a/arch/arm/plat-omap/include/plat/tc.h
+++ b/arch/arm/mach-omap1/include/mach/tc.h
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 6a5baab1f4cb..44389d7cd255 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -17,8 +17,8 @@
 #include <asm/mach/map.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include "iomap.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 6995fb6a3345..122ef67939a2 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -45,7 +45,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index ed42628611bc..7ed8c1857d56 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -27,11 +27,13 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/hardware.h>
 #include <mach/lcdc.h>
+#include "dma.h"
 int omap_lcd_dma_running(void)
 {
        /*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index bdc2e7541adb..c6d8fdf92e9c 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,14 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <mach/irqs.h>
 #include "iomap.h"
+#include "dma.h"
 #define DPS_RSTCT2_PER_EN       (1 << 0)
 #define DSP_RSTCT2_WD_PER_EN    (1 << 1)
diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h
new file mode 100644
index 000000000000..39c2b13de884
--- /dev/null
+++ b/arch/arm/mach-omap1/mmc.h
@@ -0,0 +1,18 @@
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+#define OMAP15XX_NR_MMC         1
+#define OMAP16XX_NR_MMC         2
+#define OMAP1_MMC_SIZE          0x080
+#define OMAP1_MMC1_BASE         0xfffb7800
+#define OMAP1_MMC2_BASE         0xfffb7c00      /* omap16xx only */
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+                                int nr_controllers);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+                                int nr_controllers)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c
index 9cd4ddb51397..8dcebe6d8882 100644
--- a/arch/arm/mach-omap1/opp_data.c
+++ b/arch/arm/mach-omap1/opp_data.c
@@ -10,7 +10,7 @@
 * published by the Free Software Foundation.
 */
-#include <plat/clkdev_omap.h>
+#include "clock.h"
 #include "opp.h"
 /*-------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 47ec16155483..b2c2328d7c18 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -49,17 +49,17 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <plat/cpu.h>
+#include <mach/tc.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/tc.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <plat/dmtimer.h>
 #include <mach/irqs.h>
+#include "../plat-omap/sram.h"
 #include "iomap.h"
+#include "clock.h"
 #include "pm.h"
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 7868e75ad077..16bf2f95117c 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -19,9 +19,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
 #ifdef CONFIG_PM_RUNTIME
 static int omap1_pm_runtime_suspend(struct device *dev)
 {
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index b9d6834af835..d1ac08016f0b 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -23,7 +23,6 @@
 #include <asm/mach-types.h>
 #include <mach/mux.h>
-#include <plat/fpga.h>
 #include "pm.h"
diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h
new file mode 100644
index 000000000000..6cf9c1cc2bef
--- /dev/null
+++ b/arch/arm/mach-omap1/soc.h
@@ -0,0 +1,229 @@
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef OMAP_NAME
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+/*
+ * omap_rev bits:
+ * CPU id bits  (0730, 1510, 1710, 2422...)     [31:16]
+ * CPU revision (See _REV_ defined in cpu.h)    [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)   [07:00]
+ */
+unsigned int omap_rev(void);
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()     ((omap_rev() >> 8) & 0xff)
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():    True for OMAP730, OMAP850
+ * cpu_is_omap15xx():   True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():   True for OMAP1610, OMAP5912 and OMAP1710
+ */
+#define GET_OMAP_CLASS  (omap_rev() & 0xff)
+#define IS_OMAP_CLASS(class, id)                        \
+static inline int is_omap ##class (void)                \
+{                                                       \
+        return (GET_OMAP_CLASS == (id)) ? 1 : 0;        \
+}
+#define GET_OMAP_SUBCLASS       ((omap_rev() >> 20) & 0x0fff)
+#define IS_OMAP_SUBCLASS(subclass, id)                  \
+static inline int is_omap ##subclass (void)             \
+{                                                       \
+        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
+}
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+#define cpu_is_omap7xx()                0
+#define cpu_is_omap15xx()               0
+#define cpu_is_omap16xx()               0
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()              is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()              is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()             is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()             is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()              1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()              1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()             1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()             1
+# endif
+#endif
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap310():    True for OMAP310
+ * cpu_is_omap1510():   True for OMAP1510
+ * cpu_is_omap1610():   True for OMAP1610
+ * cpu_is_omap1611():   True for OMAP1611
+ * cpu_is_omap5912():   True for OMAP5912
+ * cpu_is_omap1621():   True for OMAP1621
+ * cpu_is_omap1710():   True for OMAP1710
+ */
+#define GET_OMAP_TYPE   ((omap_rev() >> 16) & 0xffff)
+#define IS_OMAP_TYPE(type, id)                          \
+static inline int is_omap ##type (void)                 \
+{                                                       \
+        return (GET_OMAP_TYPE == (id)) ? 1 : 0;         \
+}
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+#define cpu_is_omap310()                0
+#define cpu_is_omap1510()               0
+#define cpu_is_omap1610()               0
+#define cpu_is_omap5912()               0
+#define cpu_is_omap1611()               0
+#define cpu_is_omap1621()               0
+#define cpu_is_omap1710()               0
+/* These are needed to compile common code */
+#ifdef CONFIG_ARCH_OMAP1
+#define cpu_is_omap242x()               0
+#define cpu_is_omap2430()               0
+#define cpu_is_omap243x()               0
+#define cpu_is_omap24xx()               0
+#define cpu_is_omap34xx()               0
+#define cpu_is_omap44xx()               0
+#define soc_is_omap54xx()               0
+#define soc_is_am33xx()                 0
+#define cpu_class_is_omap1()            1
+#define cpu_class_is_omap2()            0
+#endif
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()               is_omap310()
+# define cpu_is_omap1510()              is_omap1510()
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()              is_omap1610()
+# define cpu_is_omap1611()              is_omap1611()
+# define cpu_is_omap5912()              is_omap5912()
+# define cpu_is_omap1621()              is_omap1621()
+# define cpu_is_omap1710()              is_omap1710()
+#endif
+#endif  /* __ASSEMBLY__ */
+#endif
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fe40d9e488c9..46d9071f0938 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,8 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-         common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
+         common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+         omap_device.o
 # INTCPS IP block support - XXX should be moved to drivers/
 obj-$(CONFIG_ARCH_OMAP2)                += irq.o
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index d0c54c573d34..af11dcdb7e2c 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/davinci_emac.h>
 #include <asm/system.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "am35xx.h"
 #include "control.h"
 #include "am35xx-emac.h"
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 95b384d54f8a..49e49d0b7cf5 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -34,7 +34,7 @@
 #include <asm/mach/map.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include "gpmc-smc91x.h"
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 96cd3693e1ae..d2a419fcfce3 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -32,13 +32,14 @@
 #include <plat/usb.h>
 #include "common.h"
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
+#include "gpmc.h"
 #include "gpmc-smc91x.h"
+#include "soc.h"
 #include "board-flash.h"
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index fc224ad86747..f1df60102a65 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -20,7 +20,7 @@
 #include "gpmc-smc91x.h"
 #include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
 #include "board-flash.h"
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 3669c120c7e8..2ab267ec3b75 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -35,7 +35,6 @@
 #include "common.h"
 #include <plat/usb.h>
-#include <plat/mmc.h>
 #include "omap4-keypad.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-nokia-dsi.h>
@@ -45,6 +44,7 @@
 #include "soc.h"
 #include "mux.h"
+#include "mmc.h"
 #include "hsmmc.h"
 #include "control.h"
 #include "common-board-devices.h"
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index cea3abace815..64cf1bde0f3b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -28,14 +28,14 @@
 #include <linux/clk.h>
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/leds-omap.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <plat/led.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 376d26eb601c..73e2ba9b343b 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -40,7 +40,7 @@
 #include "common.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
@@ -53,6 +53,7 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc-nand.h"
 #define CM_T35_GPIO_PENDOWN             57
 #define SB_T35_USB_HUB_RESET_GPIO       167
@@ -181,7 +182,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = {
 static void __init cm_t35_init_nand(void)
 {
-        if (gpmc_nand_init(&cm_t35_nand_data) < 0)
+        if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
                pr_err("CM-T35: Unable to register NAND device\n");
 }
 #else
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 59c0a45f75b0..b5495e415024 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -41,7 +41,7 @@
 #include "common.h"
 #include <plat/usb.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "am35xx.h"
@@ -49,6 +49,7 @@
 #include "control.h"
 #include "common-board-devices.h"
 #include "am35xx-emac.h"
+#include "gpmc-nand.h"
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {
@@ -240,7 +241,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = {
 static void __init cm_t3517_init_nand(void)
 {
-        if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
+        if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0)
                pr_err("CM-T3517: NAND initialization failed\n");
 }
 #else
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 1fd161e934c7..3eedb8fd0370 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -39,7 +39,7 @@
 #include <asm/mach/flash.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -55,8 +55,11 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
+#define NAND_CS                 0
 #define OMAP_DM9000_GPIO_IRQ    25
 #define OMAP3_DEVKIT_TS_GPIO    27
@@ -621,8 +624,9 @@ static void __init devkit8000_init(void)
        usb_musb_init(NULL);
        usbhs_init(&usbhs_bdata);
-        omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
+        board_nand_init(devkit8000_nand_partitions,
-                             ARRAY_SIZE(devkit8000_nand_partitions));
+                        ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+                        NAND_BUSWIDTH_16, NULL);
        omap_twl4030_audio_init("omap3beagle");
        /* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index e642acf9cad0..c33adea0247c 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -17,14 +17,14 @@
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
-#include <plat/tc.h>
+#include "soc.h"
 #include "common.h"
 #include "board-flash.h"
+#include "gpmc-onenand.h"
+#include "gpmc-nand.h"
 #define REG_FPGA_REV                    0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2      0x60
@@ -104,36 +104,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
                defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 /* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+        {
+                .sync_clk = 0,
-        .sync_clk = 0,
+                .cs_on = 0,
+                .cs_rd_off = 36,
+                .cs_wr_off = 36,
-        .cs_on = 0,
+                .adv_on = 6,
-        .cs_rd_off = 36,
+                .adv_rd_off = 24,
-        .cs_wr_off = 36,
+                .adv_wr_off = 36,
-        .adv_on = 6,
+                .we_off = 30,
-        .adv_rd_off = 24,
+                .oe_off = 48,
-        .adv_wr_off = 36,
-        .we_off = 30,
+                .access = 54,
-        .oe_off = 48,
+                .rd_cycle = 72,
+                .wr_cycle = 72,
-        .access = 54,
+                .wr_access = 30,
-        .rd_cycle = 72,
+                .wr_data_mux_bus = 0,
-        .wr_cycle = 72,
+        },
-        .wr_access = 30,
-        .wr_data_mux_bus = 0,
 };
-static struct omap_nand_platform_data board_nand_data = {
+static struct omap_nand_platform_data board_nand_data;
-        .gpmc_t         = &nand_timings,
-};
 void
-__init board_nand_init(struct mtd_partition *nand_parts,
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
-                        u8 nr_parts, u8 cs, int nand_type)
+                                int nand_type, struct gpmc_timings *gpmc_t)
 {
        board_nand_data.cs              = cs;
        board_nand_data.parts           = nand_parts;
@@ -141,7 +140,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
        board_nand_data.devsize         = nand_type;
        board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-        gpmc_nand_init(&board_nand_data);
+        gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
@@ -238,5 +237,6 @@ void __init board_flash_init(struct flash_partitions partition_info[],
                pr_err("NAND: Unable to find configuration in GPMC\n");
        else
                board_nand_init(partition_info[2].parts,
-                        partition_info[2].nr_parts, nandcs, nand_type);
+                        partition_info[2].nr_parts, nandcs,
+                        nand_type, nand_default_timings);
 }
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c44b70d52021..2fb5d41a9fae 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -12,7 +12,7 @@
 */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #define PDC_NOR         1
 #define PDC_NAND        2
@@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[],
 #if defined(CONFIG_MTD_NAND_OMAP2) || \
                defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 extern void board_nand_init(struct mtd_partition *nand_parts,
-                                        u8 nr_parts, u8 cs, int nand_type);
+                u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
+extern struct gpmc_timings nand_default_timings[];
 #else
 static inline void board_nand_init(struct mtd_partition *nand_parts,
-                                        u8 nr_parts, u8 cs, int nand_type)
+                u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
 {
 }
+#define nand_default_timings    NULL
 #endif
 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 8d04bf851af4..366ebd93ae24 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -32,8 +32,7 @@
 #include <asm/mach/map.h>
 #include <plat/menelaus.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
 #include "debug-devices.h"
 #include <video/omapdss.h>
@@ -42,6 +41,7 @@
 #include "common.h"
 #include "mux.h"
 #include "control.h"
+#include "gpmc.h"
 #define H4_FLASH_CS     0
 #define H4_SMC91X_CS    1
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 48d5e41dfbfa..9a9a9b5f78b6 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -43,6 +43,7 @@
 #include "common-board-devices.h"
 #include "board-flash.h"
 #include "control.h"
+#include "gpmc-onenand.h"
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
@@ -175,7 +176,7 @@ static void __init igep_flash_init(void)
                pr_info("IGEP: initializing NAND memory device\n");
                board_nand_init(igep_flash_partitions,
                                ARRAY_SIZE(igep_flash_partitions),
-                                0, NAND_BUSWIDTH_16);
+                                0, NAND_BUSWIDTH_16, nand_default_timings);
        } else if (mux == IGEP_SYSBOOT_ONENAND) {
                pr_info("IGEP: initializing OneNAND memory device\n");
                board_onenand_init(igep_flash_partitions,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ee8c3cfb95b3..35ee018d9289 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -35,8 +35,8 @@
 #include <asm/mach/map.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
 #include <plat/usb.h>
 #include "gpmc-smsc911x.h"
@@ -420,8 +420,8 @@ static void __init omap_ldp_init(void)
        omap_serial_init();
        omap_sdrc_init(NULL, NULL);
        usb_musb_init(NULL);
-        board_nand_init(ldp_nand_partitions,
+        board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
-                ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+                        ZOOM_NAND_CS, 0, nand_default_timings);
        omap_hsmmc_init(mmc);
        ldp_display_init();
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index d95f727ca39a..cea433b9b7b9 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -29,9 +29,10 @@
 #include "common.h"
 #include <plat/menelaus.h>
-#include <plat/mmc.h>
+#include "mmc.h"
 #include "mux.h"
+#include "gpmc-onenand.h"
 #define TUSB6010_ASYNC_CS       1
 #define TUSB6010_SYNC_CS        4
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 388c431c745a..a5497ce0a6c8 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,16 +41,20 @@
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
+#include "soc.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "pm.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
+#define NAND_CS 0
 /*
 * OMAP3 Beagle revision
 * Run time detection of Beagle revision is done by reading GPIO.
@@ -512,8 +516,9 @@ static void __init omap3_beagle_init(void)
        usb_musb_init(NULL);
        usbhs_init(&usbhs_bdata);
-        omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
+        board_nand_init(omap3beagle_nand_partitions,
-                             ARRAY_SIZE(omap3beagle_nand_partitions));
+                        ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
+                        NAND_BUSWIDTH_16, NULL);
        omap_twl4030_audio_init("omap3beagle");
        /* Ensure msecure is mux'd to be able to set the RTC. */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b9b776b6c954..8479779fd346 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -52,10 +52,14 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
+#include "soc.h"
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "board-flash.h"
+#define NAND_CS                 0
 #define OMAP3_EVM_TS_GPIO       175
 #define OMAP3_EVM_EHCI_VBUS     22
@@ -731,8 +735,9 @@ static void __init omap3_evm_init(void)
        }
        usb_musb_init(&musb_board_data);
        usbhs_init(&usbhs_bdata);
-        omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
+        board_nand_init(omap3evm_nand_partitions,
-                             ARRAY_SIZE(omap3evm_nand_partitions));
+                        ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
+                        NAND_BUSWIDTH_16, NULL);
        omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
        omap3evm_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 7bd8253b5d1d..6f58cad5bf74 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -34,9 +34,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include "gpmc-smsc911x.h"
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
 #include <plat/usb.h>
 #include "common.h"
@@ -44,6 +41,8 @@
 #include "hsmmc.h"
 #include "control.h"
 #include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-smsc911x.h"
 #define OMAP3LOGIC_SMSC911X_CS                  1
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 00a1f4ae6e44..f286b4b4bd5b 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -50,6 +50,7 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc-nand.h"
 #define PANDORA_WIFI_IRQ_GPIO           21
 #define PANDORA_WIFI_NRESET_GPIO        23
@@ -602,7 +603,7 @@ static void __init omap3pandora_init(void)
        omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
        usbhs_init(&usbhs_bdata);
        usb_musb_init(NULL);
-        gpmc_nand_init(&pandora_nand_data);
+        gpmc_nand_init(&pandora_nand_data, NULL);
        /* Ensure SDRC pins are mux'd for self-refresh */
        omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 731235eb319e..3c83b9fbff45 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -40,7 +40,7 @@
 #include <asm/mach/flash.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 944ffc436577..cd282ae0856b 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -44,12 +44,13 @@
 #include <asm/system_info.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include "mux.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 #include <asm/setup.h>
@@ -59,6 +60,8 @@
 #define TB_BL_PWM_TIMER         9
 #define TB_KILL_POWER_GPIO      168
+#define NAND_CS                 0
 static unsigned long touchbook_revision;
 static struct mtd_partition omap3touchbook_nand_partitions[] = {
@@ -365,8 +368,9 @@ static void __init omap3_touchbook_init(void)
        omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
        usb_musb_init(NULL);
        usbhs_init(&usbhs_bdata);
-        omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
+        board_nand_init(omap3touchbook_nand_partitions,
-                             ARRAY_SIZE(omap3touchbook_nand_partitions));
+                        ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
+                        NAND_BUSWIDTH_16, NULL);
        /* Ensure SDRC pins are mux'd for self-refresh */
        omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index bfcd397e233c..e9ce9fb9ffac 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -40,10 +40,10 @@
 #include "common.h"
 #include <plat/usb.h>
-#include <plat/mmc.h>
 #include <video/omap-panel-tfp410.h>
 #include "soc.h"
+#include "mmc.h"
 #include "hsmmc.h"
 #include "control.h"
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b700685762b5..3a9d1fa8bebd 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -49,14 +49,17 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
+#define NAND_CS                 0
 #define OVERO_GPIO_BT_XGATE     15
 #define OVERO_GPIO_W2W_NRESET   16
 #define OVERO_GPIO_PENDOWN      114
@@ -495,8 +498,8 @@ static void __init overo_init(void)
        omap_serial_init();
        omap_sdrc_init(mt46h32m32lf6_sdrc_params,
                                  mt46h32m32lf6_sdrc_params);
-        omap_nand_flash_init(0, overo_nand_partitions,
+        board_nand_init(overo_nand_partitions,
-                             ARRAY_SIZE(overo_nand_partitions));
+                        ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
        usb_musb_init(NULL);
        usbhs_init(&usbhs_bdata);
        overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 45997bfbcbd2..d42ecfe56096 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -22,17 +22,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
-#include <plat/i2c.h>
-#include <plat/mmc.h>
 #include <plat/usb.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "common.h"
 #include <plat/serial.h>
 #include "mux.h"
+#include "mmc.h"
 #include "hsmmc.h"
 #include "sdram-nokia.h"
 #include "common-board-devices.h"
+#include "gpmc-onenand.h"
 static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
        REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 020e03c95bfe..07005fe40a2a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -31,9 +31,7 @@
 #include <asm/system_info.h>
 #include "common.h"
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
-#include <plat/omap-pm.h>
 #include "gpmc-smc91x.h"
 #include "board-rx51.h"
@@ -52,8 +50,11 @@
 #endif
 #include "mux.h"
+#include "omap-pm.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-onenand.h"
 #define SYSTEM_REV_B_USES_VAUX3 0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 7bbb05d9689b..63b33c63bd94 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -23,12 +23,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include "common.h"
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
-#include <plat/gpmc.h>
 #include <plat/usb.h>
+#include "common.h"
 #include "mux.h"
+#include "gpmc.h"
 #include "pm.h"
 #include "sdram-nokia.h"
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index afb2278a29f6..42e5f231a799 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -17,10 +17,10 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smsc911x.h"
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
 #include "soc.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index b940ab2259fb..1c7c834a5b5f 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -16,8 +16,9 @@
 #include <linux/spi/spi.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <video/omapdss.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
+#include "soc.h"
 #include "common.h"
 #define LCD_PANEL_RESET_GPIO_PROD       96
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index c166fe1fdff9..74ac565ca9d0 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -28,7 +28,7 @@
 #include "common.h"
 #include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
 #include "mux.h"
 #include "hsmmc.h"
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4994438e1f46..50e98795b09c 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -24,7 +24,7 @@
 #include "common.h"
 #include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
 #include "board-flash.h"
 #include "mux.h"
@@ -113,8 +113,9 @@ static void __init omap_zoom_init(void)
                usbhs_init(&usbhs_bdata);
        }
-        board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
+        board_nand_init(zoom_nand_partitions,
-                                                ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+                        ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+                        NAND_BUSWIDTH_16, nand_default_timings);
        zoom_debugboard_init();
        zoom_peripherals_init();
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h
index 2e9486940ead..2e9486940ead 100644
--- a/arch/arm/mach-omap2/include/mach/board-zoom.h
+++ b/arch/arm/mach-omap2/board-zoom.h
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
index c2d15212d64d..73a1414b89b0 100644
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -21,7 +21,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include <plat/prcm.h>
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpll.c b/arch/arm/mach-omap2/clkt2xxx_dpll.c
index 1502a7bc20bb..0890ba94a282 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpll.c
@@ -14,8 +14,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index 4ae439222085..3432f913f743 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -25,15 +25,14 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
+#include "../plat-omap/sram.h"
-#include <plat/sram.h>
-#include <plat/sdrc.h>
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
+#include "sdrc.h"
 /* #define DOWN_VARIABLE_DPLL 1 */              /* Experimental */
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
index c3460928b5e0..e1777371bb5e 100644
--- a/arch/arm/mach-omap2/clkt2xxx_osc.c
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -23,8 +23,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "clock2xxx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c
index 8693cfdac49a..46683b3c2461 100644
--- a/arch/arm/mach-omap2/clkt2xxx_sys.c
+++ b/arch/arm/mach-omap2/clkt2xxx_sys.c
@@ -22,8 +22,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "clock2xxx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 3524f0e7b6d5..c66276b2bf0a 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -33,9 +33,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
-#include <plat/clock.h>
+#include "../plat-omap/sram.h"
-#include <plat/sram.h>
-#include <plat/sdrc.h>
 #include "soc.h"
 #include "clock.h"
@@ -43,6 +41,7 @@
 #include "opp2xxx.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
+#include "sdrc.h"
 const struct prcm_config *curr_prcm_set;
 const struct prcm_config *rate_table;
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 7c6da2f731dc..5510d92abe6e 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -21,9 +21,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
+#include "../plat-omap/sram.h"
-#include <plat/sram.h>
-#include <plat/sdrc.h>
 #include "clock.h"
 #include "clock3xxx.h"
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 3ff22114d702..53646facda45 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -45,8 +45,6 @@
 #include <linux/io.h>
 #include <linux/bug.h>
-#include <plat/clock.h>
 #include "clock.h"
 /* Private functions */
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 80411142f482..8463cc356245 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -21,8 +21,6 @@
 #include <asm/div64.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "clock.h"
 #include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index 3d43fba2542f..7c8d41e49834 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -14,7 +14,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include <plat/prcm.h>
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 961ac8f7e13d..8b30759f8f9e 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -15,6 +15,7 @@
 #undef DEBUG
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -25,7 +26,6 @@
 #include <asm/cpu.h>
-#include <plat/clock.h>
 #include <plat/prcm.h>
 #include <trace/events/power.h>
@@ -47,6 +47,10 @@ u16 cpu_mask;
 */
 static bool clkdm_control = true;
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
 /*
 * OMAP2+ specific clock functions
 */
@@ -512,12 +516,510 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 /* Common data */
-struct clk_functions omap2_clk_functions = {
+int clk_enable(struct clk *clk)
-        .clk_enable             = omap2_clk_enable,
+{
-        .clk_disable            = omap2_clk_disable,
+        unsigned long flags;
-        .clk_round_rate         = omap2_clk_round_rate,
+        int ret;
-        .clk_set_rate           = omap2_clk_set_rate,
-        .clk_set_parent         = omap2_clk_set_parent,
+        if (clk == NULL || IS_ERR(clk))
-        .clk_disable_unused     = omap2_clk_disable_unused,
+                return -EINVAL;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap2_clk_enable(clk);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+void clk_disable(struct clk *clk)
+{
+        unsigned long flags;
+        if (clk == NULL || IS_ERR(clk))
+                return;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        if (clk->usecount == 0) {
+                pr_err("Trying disable clock %s with 0 usecount\n",
+                       clk->name);
+                WARN_ON(1);
+                goto out;
+        }
+        omap2_clk_disable(clk);
+out:
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+unsigned long clk_get_rate(struct clk *clk)
+{
+        unsigned long flags;
+        unsigned long ret;
+        if (clk == NULL || IS_ERR(clk))
+                return 0;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = clk->rate;
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long flags;
+        long ret;
+        if (clk == NULL || IS_ERR(clk))
+                return 0;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap2_clk_round_rate(clk, rate);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long flags;
+        int ret = -EINVAL;
+        if (clk == NULL || IS_ERR(clk))
+                return ret;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap2_clk_set_rate(clk, rate);
+        if (ret == 0)
+                propagate_rate(clk);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        unsigned long flags;
+        int ret = -EINVAL;
+        if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
+                return ret;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        if (clk->usecount == 0) {
+                ret = omap2_clk_set_parent(clk, parent);
+                if (ret == 0)
+                        propagate_rate(clk);
+        } else {
+                ret = -EBUSY;
+        }
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+struct clk *clk_get_parent(struct clk *clk)
+{
+        return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+int __initdata mpurate;
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+        get_option(&str, &mpurate);
+        if (!mpurate)
+                return 1;
+        if (mpurate < 1000)
+                mpurate *= 1000000;
+        return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+        return clk->parent->rate;
+}
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+        WARN_ON(!clk->fixed_div);
+        return clk->parent->rate / clk->fixed_div;
+}
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+        list_del_init(&child->sibling);
+        if (parent)
+                list_add(&child->sibling, &parent->children);
+        child->parent = parent;
+        /* now do the debugfs renaming to reattach the child
+           to the proper parent */
+}
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &tclk->children, sibling) {
+                if (clkp->recalc)
+                        clkp->rate = clkp->recalc(clkp);
+                propagate_rate(clkp);
+        }
+}
+static LIST_HEAD(root_clks);
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &root_clks, sibling) {
+                if (clkp->recalc)
+                        clkp->rate = clkp->recalc(clkp);
+                propagate_rate(clkp);
+        }
+}
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run.  No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+        INIT_LIST_HEAD(&clk->children);
+}
+int clk_register(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return -EINVAL;
+        /*
+         * trap out already registered clocks
+         */
+        if (clk->node.next || clk->node.prev)
+                return 0;
+        mutex_lock(&clocks_mutex);
+        if (clk->parent)
+                list_add(&clk->sibling, &clk->parent->children);
+        else
+                list_add(&clk->sibling, &root_clks);
+        list_add(&clk->node, &clocks);
+        if (clk->init)
+                clk->init(clk);
+        mutex_unlock(&clocks_mutex);
+        return 0;
+}
+EXPORT_SYMBOL(clk_register);
+void clk_unregister(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return;
+        mutex_lock(&clocks_mutex);
+        list_del(&clk->sibling);
+        list_del(&clk->node);
+        mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+void clk_enable_init_clocks(void)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &clocks, node)
+                if (clkp->flags & ENABLE_ON_INIT)
+                        clk_enable(clkp);
+}
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name.  Assumes that struct clk
+ * names are unique.  Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+        struct clk *c;
+        struct clk *ret = NULL;
+        mutex_lock(&clocks_mutex);
+        list_for_each_entry(c, &clocks, node) {
+                if (!strcmp(c->name, name)) {
+                        ret = c;
+                        break;
+                }
+        }
+        mutex_unlock(&clocks_mutex);
+        return ret;
+}
+int omap_clk_enable_autoidle_all(void)
+{
+        struct clk *c;
+        unsigned long flags;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(c, &clocks, node)
+                if (c->ops->allow_idle)
+                        c->ops->allow_idle(c);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+int omap_clk_disable_autoidle_all(void)
+{
+        struct clk *c;
+        unsigned long flags;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(c, &clocks, node)
+                if (c->ops->deny_idle)
+                        c->ops->deny_idle(c);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+        return 0;
+}
+static void clkll_disable_null(struct clk *clk)
+{
+}
+const struct clkops clkops_null = {
+        .enable         = clkll_enable_null,
+        .disable        = clkll_disable_null,
+};
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+        .name   = "dummy",
+        .ops    = &clkops_null,
+};
+/*
+ *
+ */
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+        struct clk *ck;
+        unsigned long flags;
+        pr_info("clock: disabling unused clocks to save power\n");
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(ck, &clocks, node) {
+                if (ck->ops == &clkops_null)
+                        continue;
+                if (ck->usecount > 0 || !ck->enable_reg)
+                        continue;
+                omap2_clk_disable_unused(ck);
+        }
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ *      debugfs support to trace clock tree hierarchy and attributes
+ */
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+static struct dentry *clk_debugfs_root;
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+        struct clk *c;
+        struct clk *pa;
+        mutex_lock(&clocks_mutex);
+        seq_printf(s, "%-30s %-30s %-10s %s\n",
+                   "clock-name", "parent-name", "rate", "use-count");
+        list_for_each_entry(c, &clocks, node) {
+                pa = c->parent;
+                seq_printf(s, "%-30s %-30s %-10lu %d\n",
+                           c->name, pa ? pa->name : "none", c->rate,
+                           c->usecount);
+        }
+        mutex_unlock(&clocks_mutex);
+        return 0;
+}
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+static const struct file_operations debug_clock_fops = {
+        .open           = clk_dbg_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
 };
+static int clk_debugfs_register_one(struct clk *c)
+{
+        int err;
+        struct dentry *d;
+        struct clk *pa = c->parent;
+        d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+        if (!d)
+                return -ENOMEM;
+        c->dent = d;
+        d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        return 0;
+err_out:
+        debugfs_remove_recursive(c->dent);
+        return err;
+}
+static int clk_debugfs_register(struct clk *c)
+{
+        int err;
+        struct clk *pa = c->parent;
+        if (pa && !pa->dent) {
+                err = clk_debugfs_register(pa);
+                if (err)
+                        return err;
+        }
+        if (!c->dent) {
+                err = clk_debugfs_register_one(c);
+                if (err)
+                        return err;
+        }
+        return 0;
+}
+static int __init clk_debugfs_init(void)
+{
+        struct clk *c;
+        struct dentry *d;
+        int err;
+        d = debugfs_create_dir("clock", NULL);
+        if (!d)
+                return -ENOMEM;
+        clk_debugfs_root = d;
+        list_for_each_entry(c, &clocks, node) {
+                err = clk_debugfs_register(c);
+                if (err)
+                        goto err_out;
+        }
+        d = debugfs_create_file("summary", S_IRUGO,
+                d, NULL, &debug_clock_fops);
+        if (!d)
+                return -ENOMEM;
+        return 0;
+err_out:
+        debugfs_remove_recursive(clk_debugfs_root);
+        return err;
+}
+late_initcall(clk_debugfs_init);
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 35ec5f3d9a73..cfba1ffe5cc2 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -17,8 +17,323 @@
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clkdev.h>
+struct omap_clk {
+        u16                             cpu;
+        struct clk_lookup               lk;
+};
+#define CLK(dev, con, ck, cp)           \
+        {                               \
+                 .cpu = cp,             \
+                .lk = {                 \
+                        .dev_id = dev,  \
+                        .con_id = con,  \
+                        .clk = ck,      \
+                },                      \
+        }
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_242X         (1 << 0)
+#define CK_243X         (1 << 1)        /* 243x, 253x */
+#define CK_3430ES1      (1 << 2)        /* 34xxES1 only */
+#define CK_3430ES2PLUS  (1 << 3)        /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_AM35XX       (1 << 4)        /* Sitara AM35xx */
+#define CK_36XX         (1 << 5)        /* 36xx/37xx-specific clocks */
+#define CK_443X         (1 << 6)
+#define CK_TI816X       (1 << 7)
+#define CK_446X         (1 << 8)
+#define CK_AM33XX       (1 << 9)        /* AM33xx specific clocks */
+#define CK_34XX         (CK_3430ES1 | CK_3430ES2PLUS)
+#define CK_3XXX         (CK_34XX | CK_AM35XX | CK_36XX)
+struct module;
+struct clk;
+struct clockdomain;
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk)     (clk->name)
+#define __clk_get_parent(clk)   (clk->parent)
+#define __clk_get_rate(clk)     (clk->rate)
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware.  Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+        int                     (*enable)(struct clk *);
+        void                    (*disable)(struct clk *);
+        void                    (*find_idlest)(struct clk *, void __iomem **,
+                                               u8 *, u8 *);
+        void                    (*find_companion)(struct clk *, void __iomem **,
+                                                  u8 *);
+        void                    (*allow_idle)(struct clk *);
+        void                    (*deny_idle)(struct clk *);
+};
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X            (1 << 0)
+#define RATE_IN_243X            (1 << 1)
+#define RATE_IN_3430ES1         (1 << 2)        /* 3430ES1 rates only */
+#define RATE_IN_3430ES2PLUS     (1 << 3)        /* 3430 ES >= 2 rates only */
+#define RATE_IN_36XX            (1 << 4)
+#define RATE_IN_4430            (1 << 5)
+#define RATE_IN_TI816X          (1 << 6)
+#define RATE_IN_4460            (1 << 7)
+#define RATE_IN_AM33XX          (1 << 8)
+#define RATE_IN_TI814X          (1 << 9)
+#define RATE_IN_24XX            (RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_34XX            (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
+#define RATE_IN_3XXX            (RATE_IN_34XX | RATE_IN_36XX)
+#define RATE_IN_44XX            (RATE_IN_4430 | RATE_IN_4460)
+/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
+#define RATE_IN_3430ES2PLUS_36XX        (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ */
+struct clksel_rate {
+        u32                     val;
+        u8                      div;
+        u16                     flags;
+};
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
+struct clksel {
+        struct clk               *parent;
+        const struct clksel_rate *rates;
+};
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+        void __iomem            *mult_div1_reg;
+        u32                     mult_mask;
+        u32                     div1_mask;
+        struct clk              *clk_bypass;
+        struct clk              *clk_ref;
+        void __iomem            *control_reg;
+        u32                     enable_mask;
+        unsigned long           last_rounded_rate;
+        u16                     last_rounded_m;
+        u16                     max_multiplier;
+        u8                      last_rounded_n;
+        u8                      min_divider;
+        u16                     max_divider;
+        u8                      modes;
+        void __iomem            *autoidle_reg;
+        void __iomem            *idlest_reg;
+        u32                     autoidle_mask;
+        u32                     freqsel_mask;
+        u32                     idlest_mask;
+        u32                     dco_mask;
+        u32                     sddiv_mask;
+        u8                      auto_recal_bit;
+        u8                      recal_en_bit;
+        u8                      recal_st_bit;
+        u8                      flags;
+};
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT        (1 << 0)        /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL      (1 << 1)
+#define CLOCK_NO_IDLE_PARENT    (1 << 2)
+#define ENABLE_ON_INIT          (1 << 3)        /* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 4)        /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2          (1 << 5)
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named.  It should be "enable_count" or
+ * something similar.  "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals.  (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+        struct list_head        node;
+        const struct clkops     *ops;
+        const char              *name;
+        struct clk              *parent;
+        struct list_head        children;
+        struct list_head        sibling;        /* node for children */
+        unsigned long           rate;
+        void __iomem            *enable_reg;
+        unsigned long           (*recalc)(struct clk *);
+        int                     (*set_rate)(struct clk *, unsigned long);
+        long                    (*round_rate)(struct clk *, unsigned long);
+        void                    (*init)(struct clk *);
+        u8                      enable_bit;
+        s8                      usecount;
+        u8                      fixed_div;
+        u8                      flags;
+        void __iomem            *clksel_reg;
+        u32                     clksel_mask;
+        const struct clksel     *clksel;
+        struct dpll_data        *dpll_data;
+        const char              *clkdm_name;
+        struct clockdomain      *clkdm;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+        struct dentry           *dent;  /* For visible tree hierarchy */
+#endif
+};
+struct clk_functions {
+        int             (*clk_enable)(struct clk *clk);
+        void            (*clk_disable)(struct clk *clk);
+        long            (*clk_round_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_parent)(struct clk *clk, struct clk *parent);
+        void            (*clk_allow_idle)(struct clk *clk);
+        void            (*clk_deny_idle)(struct clk *clk);
+        void            (*clk_disable_unused)(struct clk *clk);
+};
+extern int mpurate;
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+extern const struct clkops clkops_null;
+extern struct clk dummy_ck;
-#include <plat/clock.h>
 /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
 #define CORE_CLK_SRC_32K                0x0
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index c3cde1a2b6de..ff47a6c2611d 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -18,8 +18,6 @@
 #include <linux/clk.h>
 #include <linux/list.h>
-#include <plat/clkdev_omap.h>
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
@@ -1935,8 +1933,6 @@ int __init omap2420_clk_init(void)
        cpu_mask = RATE_IN_242X;
        rate_table = omap2420_rate_table;
-        clk_init(&omap2_clk_functions);
        for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
             c++)
                clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
index a8e326177466..850f83e8954f 100644
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -21,8 +21,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 22404fe435e7..cab8e9c52d6e 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -17,8 +17,6 @@
 #include <linux/clk.h>
 #include <linux/list.h>
-#include <plat/clkdev_omap.h>
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
@@ -2034,8 +2032,6 @@ int __init omap2430_clk_init(void)
        cpu_mask = RATE_IN_243X;
        rate_table = omap2430_rate_table;
-        clk_init(&omap2_clk_functions);
        for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
             c++)
                clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index e92be1fc1a00..5feee16fee0e 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -22,8 +22,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 114ab4b8e0e3..1cb79cc58089 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -17,9 +17,8 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/clk.h>
-#include <plat/clkdev_omap.h>
-#include "am33xx.h"
+#include "soc.h"
 #include "iomap.h"
 #include "control.h"
 #include "clock.h"
@@ -1085,8 +1084,6 @@ int __init am33xx_clk_init(void)
                cpu_clkflg = CK_AM33XX;
        }
-        clk_init(&omap2_clk_functions);
        for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++)
                clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 1fc96b9ee330..baaaa4258708 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -21,8 +21,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "clock34xx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
index 2e97d08f0e56..80209050cd7a 100644
--- a/arch/arm/mach-omap2/clock3517.c
+++ b/arch/arm/mach-omap2/clock3517.c
@@ -21,8 +21,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "clock3517.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index 0c5e25ed8879..0e1e9e4e2fa4 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -22,8 +22,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "clock36xx.h"
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 83bb01427d40..3e8aca2b1b61 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -21,8 +21,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "clock.h"
 #include "clock3xxx.h"
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 1f42c9d5ecf3..a02d158568e8 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -21,8 +21,6 @@
 #include <linux/list.h>
 #include <linux/io.h>
-#include <plat/clkdev_omap.h>
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
@@ -3573,8 +3571,6 @@ int __init omap3xxx_clk_init(void)
        else
                dpll4_dd = dpll4_dd_34xx;
-        clk_init(&omap2_clk_functions);
        for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
             c++)
                clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index d661d138f270..a66eeae3bc5d 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -28,8 +28,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clkdev_omap.h>
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
@@ -3366,8 +3364,6 @@ int __init omap4xxx_clk_init(void)
                return 0;
        }
-        clk_init(&omap2_clk_functions);
        /*
         * Must stay commented until all OMAP SoC drivers are
         * converted to runtime PM, or drivers may start crashing
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index cbb879139c51..467567ad526a 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -27,7 +27,8 @@
 #include <linux/bitops.h>
-#include <plat/clock.h>
+#include "soc.h"
+#include "clock.h"
 #include "clockdomain.h"
 /* clkdm_list contains all registered struct clockdomains */
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 629576be7444..bc42446e23ab 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -18,9 +18,8 @@
 #include <linux/spinlock.h>
 #include "powerdomain.h"
-#include <plat/clock.h>
+#include "clock.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/cpu.h>
 /*
 * Clockdomain flags
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index 70294f54e35a..3e4e9209b2df 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -14,6 +14,8 @@
 #include <linux/types.h>
 #include <plat/prcm.h>
+#include "soc.h"
 #include "prm.h"
 #include "prm2xxx_3xxx.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
index 5c741852fac0..7e76becf3a4a 100644
--- a/arch/arm/mach-omap2/clockdomains2420_data.c
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -35,6 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
index f09617555e15..b923007e45d0 100644
--- a/arch/arm/mach-omap2/clockdomains2430_data.c
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -35,6 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index 933a35cd124a..e6b91e552d3d 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -33,6 +33,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 13f56eafef03..b4938abf28cc 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -22,7 +22,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
-#include <plat/common.h>
+#include "../plat-omap/common.h"
 #include "cm.h"
 #include "cm33xx.h"
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 48daac2581b4..ad856092c06a 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -25,7 +25,6 @@
 #include <linux/spi/ads7846.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
 #include "common.h"
 #include "common-board-devices.h"
@@ -96,48 +95,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 {
 }
 #endif
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-                                 int nr_parts)
-{
-        u8 cs = 0;
-        u8 nandcs = GPMC_CS_NUM + 1;
-        /* find out the chip-select on which NAND exists */
-        while (cs < GPMC_CS_NUM) {
-                u32 ret = 0;
-                ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-                if ((ret & 0xC00) == 0x800) {
-                        printk(KERN_INFO "Found NAND on CS%d\n", cs);
-                        if (nandcs > GPMC_CS_NUM)
-                                nandcs = cs;
-                }
-                cs++;
-        }
-        if (nandcs > GPMC_CS_NUM) {
-                pr_info("NAND: Unable to find configuration in GPMC\n");
-                return;
-        }
-        if (nandcs < GPMC_CS_NUM) {
-                nand_data.cs = nandcs;
-                nand_data.parts = parts;
-                nand_data.nr_parts = nr_parts;
-                nand_data.devsize = options;
-                printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-                if (gpmc_nand_init(&nand_data) < 0)
-                        printk(KERN_ERR "Unable to register NAND device\n");
-        }
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-                                 int nr_parts)
-{
-}
-#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a42836ab..72bb41b3fd25 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -10,6 +10,5 @@ struct ads7846_platform_data;
 void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
                       struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
 #endif /* __OMAP_COMMON_BOARD_DEVICES__ */
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 17950c6e130b..34fb5b95859b 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -16,14 +16,17 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_data/dsp-omap.h>
-#include <plat/clock.h>
+#include <plat/vram.h>
 #include "soc.h"
 #include "iomap.h"
 #include "common.h"
+#include "clock.h"
 #include "sdrc.h"
 #include "control.h"
+#include "omap-secure.h"
 /* Global address base setup code */
@@ -200,3 +203,20 @@ void __init omap5_map_io(void)
        omap5_map_common_io();
 }
 #endif
+/*
+ * Stub function for OMAP2 so that common files
+ * continue to build when custom builds are used
+ */
+int __weak omap_secure_ram_reserve_memblock(void)
+{
+        return 0;
+}
+void __init omap_reserve(void)
+{
+        omap_vram_reserve_sdram_memblock();
+        omap_dsp_reserve_sdram_memblock();
+        omap_secure_ram_reserve_memblock();
+        omap_barrier_reserve_memblock();
+}
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 7045e4d61ac3..d135d551d124 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -28,13 +28,17 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/i2c/twl.h>
+#include <linux/i2c-omap.h>
 #include <asm/proc-fns.h>
-#include <plat/cpu.h>
 #include <plat/serial.h>
-#include <plat/common.h>
+#include "../plat-omap/common.h"
+#include "i2c.h"
 #define OMAP_INTC_START         NR_IRQS
@@ -338,6 +342,7 @@ extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
                                      struct omap_sdrc_params *sdrc_cs1);
 struct omap2_hsmmc_info;
 extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
+extern void omap_reserve(void);
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index d1ff8399a222..bf2be5c5468d 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -1,7 +1,7 @@
 /*
 * OMAP2/3 System Control Module register access
 *
- * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007, 2012 Texas Instruments, Inc.
 * Copyright (C) 2007 Nokia Corporation
 *
 * Written by Paul Walmsley
@@ -15,8 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <plat/sdrc.h>
 #include "soc.h"
 #include "iomap.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index c8c211731d26..86a5e13c9f59 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -23,10 +23,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
+#include <plat-omap/dma-omap.h>
 #include "iomap.h"
-#include <plat/dma.h>
+#include "omap_hwmod.h"
-#include <plat/omap_hwmod.h>
+#include "omap_device.h"
-#include <plat/omap_device.h>
 #include "omap4-keypad.h"
 #include "soc.h"
@@ -34,6 +35,7 @@
 #include "mux.h"
 #include "control.h"
 #include "devices.h"
+#include "dma.h"
 #define L3_MODULES_MAX_LEN 12
 #define L3_MODULES 3
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 1011995f150a..89c57129357a 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -25,11 +25,12 @@
 #include <linux/delay.h>
 #include <video/omapdss.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #include "common.h"
+#include "soc.h"
 #include "iomap.h"
 #include "mux.h"
 #include "control.h"
@@ -284,6 +285,35 @@ err:
        return ERR_PTR(r);
 }
+static enum omapdss_version __init omap_display_get_version(void)
+{
+        if (cpu_is_omap24xx())
+                return OMAPDSS_VER_OMAP24xx;
+        else if (cpu_is_omap3630())
+                return OMAPDSS_VER_OMAP3630;
+        else if (cpu_is_omap34xx()) {
+                if (soc_is_am35xx()) {
+                        return OMAPDSS_VER_AM35xx;
+                } else {
+                        if (omap_rev() < OMAP3430_REV_ES3_0)
+                                return OMAPDSS_VER_OMAP34xx_ES1;
+                        else
+                                return OMAPDSS_VER_OMAP34xx_ES3;
+                }
+        } else if (omap_rev() == OMAP4430_REV_ES1_0)
+                return OMAPDSS_VER_OMAP4430_ES1;
+        else if (omap_rev() == OMAP4430_REV_ES2_0 ||
+                        omap_rev() == OMAP4430_REV_ES2_1 ||
+                        omap_rev() == OMAP4430_REV_ES2_2)
+                return OMAPDSS_VER_OMAP4430_ES2;
+        else if (cpu_is_omap44xx())
+                return OMAPDSS_VER_OMAP4;
+        else if (soc_is_omap54xx())
+                return OMAPDSS_VER_OMAP5;
+        else
+                return OMAPDSS_VER_UNKNOWN;
+}
 int __init omap_display_init(struct omap_dss_board_info *board_data)
 {
        int r = 0;
@@ -291,9 +321,18 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
        int i, oh_count;
        const struct omap_dss_hwmod_data *curr_dss_hwmod;
        struct platform_device *dss_pdev;
+        enum omapdss_version ver;
        /* create omapdss device */
+        ver = omap_display_get_version();
+        if (ver == OMAPDSS_VER_UNKNOWN) {
+                pr_err("DSS not supported on this SoC\n");
+                return -ENODEV;
+        }
+        board_data->version = ver;
        board_data->dsi_enable_pads = omap_dsi_enable_pads;
        board_data->dsi_disable_pads = omap_dsi_disable_pads;
        board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count;
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index ff75abe60af2..b1926cd70468 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -28,9 +28,11 @@
 #include <linux/init.h>
 #include <linux/device.h>
-#include <plat/omap_hwmod.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/omap_device.h>
-#include <plat/dma.h>
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
 #define OMAP2_DMA_STRIDE        0x60
diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h
new file mode 100644
index 000000000000..eba80dbc5218
--- /dev/null
+++ b/arch/arm/mach-omap2/dma.h
@@ -0,0 +1,131 @@
+/*
+ *  OMAP2PLUS DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __OMAP2PLUS_DMA_CHANNEL_H
+#define __OMAP2PLUS_DMA_CHANNEL_H
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE          0
+#define OMAP24XX_DMA_XTI_DMA            1       /* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0        2       /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1        3       /* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC               4       /* S_DMA_3 */
+#define OMAP24XX_DMA_GFX                5       /* S_DMA_4 */
+#define OMAP24XX_DMA_DSS                6       /* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX           7       /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2        7       /* S_DMA_6 */
+#define OMAP24XX_DMA_CWT                8       /* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX             9       /* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX             10      /* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX             11      /* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX             12      /* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX         13      /* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX         13      /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2        14      /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3        15      /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4        16      /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD          17      /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR          18      /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD       19      /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR       20      /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD       21      /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR       22      /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD       23      /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR       24      /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD       25      /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR       26      /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3        14      /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0           15      /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0           16      /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX          17      /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX          18      /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX          19      /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX          20      /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX          21      /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX          22      /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1           23      /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1           24      /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4        25      /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5        26      /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX            25      /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX            26      /* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX            27      /* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX            28      /* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX            29      /* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX            30      /* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX          31      /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX          32      /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX          33      /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX          34      /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0           35      /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0           36      /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1           37      /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1           38      /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2           39      /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2           40      /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3           41      /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3           42      /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0           43      /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0           44      /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1           45      /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1           46      /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX            47      /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX            48      /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX           49      /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX           50      /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX           51      /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX           52      /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX           53      /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX           54      /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0       55      /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0       56      /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1       57      /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1       58      /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2       59      /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2       60      /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX            61      /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX            62      /* S_DMA_61 */
+#define OMAP24XX_DMA_MS                 63      /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5        64      /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6        64      /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3        64      /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX            65      /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX            66      /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX            67      /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX            68      /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX         69      /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0           70      /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0           71      /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0               72      /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1               73      /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2               74      /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3               75      /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX            77      /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX            78      /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX            79      /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX            80      /* S_DMA_79 */
+#define OMAP36XX_DMA_UART4_TX           81      /* S_DMA_80 */
+#define OMAP36XX_DMA_UART4_RX           82      /* S_DMA_81 */
+/* Only for AM35xx */
+#define AM35XX_DMA_UART4_TX             54
+#define AM35XX_DMA_UART4_RX             55
+#endif /* __OMAP2PLUS_DMA_CHANNEL_H */
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 814e1808e158..eacf51f2bc27 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -28,8 +28,6 @@
 #include <linux/bitops.h>
 #include <linux/clkdev.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 09d0ccccb861..5854da168a9c 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -15,8 +15,6 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "clock.h"
 #include "clock44xx.h"
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 72e0f01b715c..6282cc826613 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -24,8 +24,8 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 98388109f22a..b155500e84a8 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -27,7 +27,7 @@
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #ifdef CONFIG_BRIDGE_DVFS
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #endif
 #include <linux/platform_data/dsp-omap.h>
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index d1058f16fb40..399acabc3d0b 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -23,9 +23,9 @@
 #include <linux/of.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 4acf497faeb3..8607735b3ab3 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -17,9 +17,12 @@
 #include <asm/mach/flash.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "soc.h"
+#include "gpmc-nand.h"
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE    4
 static struct resource gpmc_nand_resource[] = {
        {
@@ -40,41 +43,36 @@ static struct platform_device gpmc_nand_device = {
        .resource       = gpmc_nand_resource,
 };
-static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
+static int omap2_nand_gpmc_retime(
+                                struct omap_nand_platform_data *gpmc_nand_data,
+                                struct gpmc_timings *gpmc_t)
 {
        struct gpmc_timings t;
        int err;
-        if (!gpmc_nand_data->gpmc_t)
-                return 0;
        memset(&t, 0, sizeof(t));
-        t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk;
+        t.sync_clk = gpmc_t->sync_clk;
-        t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
+        t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on);
-        t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
+        t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on);
        /* Read */
-        t.adv_rd_off = gpmc_round_ns_to_ticks(
+        t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off);
-                                gpmc_nand_data->gpmc_t->adv_rd_off);
        t.oe_on  = t.adv_on;
-        t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
+        t.access = gpmc_round_ns_to_ticks(gpmc_t->access);
-        t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
+        t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off);
-        t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
+        t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off);
-        t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
+        t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle);
        /* Write */
-        t.adv_wr_off = gpmc_round_ns_to_ticks(
+        t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off);
-                                gpmc_nand_data->gpmc_t->adv_wr_off);
        t.we_on  = t.oe_on;
        if (cpu_is_omap34xx()) {
-            t.wr_data_mux_bus = gpmc_round_ns_to_ticks(
+            t.wr_data_mux_bus = gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus);
-                                gpmc_nand_data->gpmc_t->wr_data_mux_bus);
+            t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access);
-            t.wr_access = gpmc_round_ns_to_ticks(
-                                gpmc_nand_data->gpmc_t->wr_access);
        }
-        t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
+        t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off);
-        t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
+        t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off);
-        t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
+        t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle);
        /* Configure GPMC */
        if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
@@ -91,7 +89,29 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data
        return 0;
 }
-int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
+static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
+{
+        /* support only OMAP3 class */
+        if (!cpu_is_omap34xx()) {
+                pr_err("BCH ecc is not supported on this CPU\n");
+                return 0;
+        }
+        /*
+         * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+         * Other chips may be added if confirmed to work.
+         */
+        if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
+            (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+                pr_err("BCH 4-bit mode is not supported on this CPU\n");
+                return 0;
+        }
+        return 1;
+}
+int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
+                          struct gpmc_timings *gpmc_t)
 {
        int err = 0;
        struct device *dev = &gpmc_nand_device.dev;
@@ -112,11 +132,13 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
                                gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
        gpmc_nand_resource[2].start =
                                gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
-         /* Set timings in GPMC */
-        err = omap2_nand_gpmc_retime(gpmc_nand_data);
+        if (gpmc_t) {
-        if (err < 0) {
+                err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t);
-                dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+                if (err < 0) {
-                return err;
+                        dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+                        return err;
+                }
        }
        /* Enable RD PIN Monitoring Reg */
@@ -126,6 +148,9 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
        gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
+        if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
+                return -EINVAL;
        err = platform_device_register(&gpmc_nand_device);
        if (err < 0) {
                dev_err(dev, "Unable to register NAND device\n");
diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h
new file mode 100644
index 000000000000..d59e1281e851
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-nand.h
@@ -0,0 +1,27 @@
+/*
+ *  arch/arm/mach-omap2/gpmc-nand.h
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef __OMAP2_GPMC_NAND_H
+#define __OMAP2_GPMC_NAND_H
+#include "gpmc.h"
+#include <linux/platform_data/mtd-nand-omap2.h>
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+                          struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+                                 struct gpmc_timings *gpmc_t)
+{
+        return 0;
+}
+#endif
+#endif
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 916716e1da3b..d102183ed9a5 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -16,15 +16,25 @@
 #include <linux/mtd/onenand_regs.h>
 #include <linux/io.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/err.h>
 #include <asm/mach/flash.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "soc.h"
+#include "gpmc-onenand.h"
 #define ONENAND_IO_SIZE SZ_128K
+#define ONENAND_FLAG_SYNCREAD   (1 << 0)
+#define ONENAND_FLAG_SYNCWRITE  (1 << 1)
+#define ONENAND_FLAG_HF         (1 << 2)
+#define ONENAND_FLAG_VHF        (1 << 3)
+static unsigned onenand_flags;
+static unsigned latency;
+static int fclk_offset;
 static struct omap_onenand_platform_data *gpmc_onenand_data;
 static struct resource gpmc_onenand_resource = {
@@ -38,11 +48,9 @@ static struct platform_device gpmc_onenand_device = {
        .resource       = &gpmc_onenand_resource,
 };
-static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+static struct gpmc_timings omap2_onenand_calc_async_timings(void)
 {
        struct gpmc_timings t;
-        u32 reg;
-        int err;
        const int t_cer = 15;
        const int t_avdp = 12;
@@ -55,11 +63,6 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
        const int t_wpl = 40;
        const int t_wph = 30;
-        /* Ensure sync read and sync write are disabled */
-        reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
-        reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
-        writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
        memset(&t, 0, sizeof(t));
        t.sync_clk = 0;
        t.cs_on = 0;
@@ -86,25 +89,30 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
        t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
        t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+        return t;
+}
+static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
+{
        /* Configure GPMC for asynchronous read */
        gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
                          GPMC_CONFIG1_DEVICESIZE_16 |
                          GPMC_CONFIG1_MUXADDDATA);
-        err = gpmc_cs_set_timings(cs, &t);
+        return gpmc_cs_set_timings(cs, t);
-        if (err)
+}
-                return err;
+static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
+{
+        u32 reg;
        /* Ensure sync read and sync write are disabled */
        reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
        reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
        writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-        return 0;
 }
-static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+static void set_onenand_cfg(void __iomem *onenand_base)
-                                int sync_read, int sync_write, int hf, int vhf)
 {
        u32 reg;
@@ -112,19 +120,19 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency,
        reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
        reg |=  (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
                ONENAND_SYS_CFG1_BL_16;
-        if (sync_read)
+        if (onenand_flags & ONENAND_FLAG_SYNCREAD)
                reg |= ONENAND_SYS_CFG1_SYNC_READ;
        else
                reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
-        if (sync_write)
+        if (onenand_flags & ONENAND_FLAG_SYNCWRITE)
                reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
        else
                reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
-        if (hf)
+        if (onenand_flags & ONENAND_FLAG_HF)
                reg |= ONENAND_SYS_CFG1_HF;
        else
                reg &= ~ONENAND_SYS_CFG1_HF;
-        if (vhf)
+        if (onenand_flags & ONENAND_FLAG_VHF)
                reg |= ONENAND_SYS_CFG1_VHF;
        else
                reg &= ~ONENAND_SYS_CFG1_VHF;
@@ -132,21 +140,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency,
 }
 static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
-                                  void __iomem *onenand_base, bool *clk_dep)
+                                  void __iomem *onenand_base)
 {
        u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID);
-        int freq = 0;
+        int freq;
-        if (cfg->get_freq) {
-                struct onenand_freq_info fi;
-                fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID);
-                fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID);
-                fi.ver_id = ver;
-                freq = cfg->get_freq(&fi, clk_dep);
-                if (freq)
-                        return freq;
-        }
        switch ((ver >> 4) & 0xf) {
        case 0:
@@ -172,9 +169,9 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
        return freq;
 }
-static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+static struct gpmc_timings
-                                        void __iomem *onenand_base,
+omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
-                                        int *freq_ptr)
+                                int freq)
 {
        struct gpmc_timings t;
        const int t_cer  = 15;
@@ -184,29 +181,15 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
        const int t_wpl  = 40;
        const int t_wph  = 30;
        int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
-        int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
-        int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
-        int err, ticks_cez;
-        int cs = cfg->cs, freq = *freq_ptr;
        u32 reg;
-        bool clk_dep = false;
+        int div, fclk_offset_ns, gpmc_clk_ns;
+        int ticks_cez;
+        int cs = cfg->cs;
-        if (cfg->flags & ONENAND_SYNC_READ) {
+        if (cfg->flags & ONENAND_SYNC_READ)
-                sync_read = 1;
+                onenand_flags = ONENAND_FLAG_SYNCREAD;
-        } else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+        else if (cfg->flags & ONENAND_SYNC_READWRITE)
-                sync_read = 1;
+                onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE;
-                sync_write = 1;
-        } else
-                return omap2_onenand_set_async_mode(cs, onenand_base);
-        if (!freq) {
-                /* Very first call freq is not known */
-                err = omap2_onenand_set_async_mode(cs, onenand_base);
-                if (err)
-                        return err;
-                freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep);
-                first_time = 1;
-        }
        switch (freq) {
        case 104:
@@ -244,44 +227,31 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
                t_ach   = 9;
                t_aavdh = 7;
                t_rdyo  = 15;
-                sync_write = 0;
+                onenand_flags &= ~ONENAND_FLAG_SYNCWRITE;
                break;
        }
-        div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+        div = gpmc_calc_divider(min_gpmc_clk_period);
        gpmc_clk_ns = gpmc_ticks_to_ns(div);
        if (gpmc_clk_ns < 15) /* >66Mhz */
-                hf = 1;
+                onenand_flags |= ONENAND_FLAG_HF;
+        else
+                onenand_flags &= ~ONENAND_FLAG_HF;
        if (gpmc_clk_ns < 12) /* >83Mhz */
-                vhf = 1;
+                onenand_flags |= ONENAND_FLAG_VHF;
-        if (vhf)
+        else
+                onenand_flags &= ~ONENAND_FLAG_VHF;
+        if (onenand_flags & ONENAND_FLAG_VHF)
                latency = 8;
-        else if (hf)
+        else if (onenand_flags & ONENAND_FLAG_HF)
                latency = 6;
        else if (gpmc_clk_ns >= 25) /* 40 MHz*/
                latency = 3;
        else
                latency = 4;
-        if (clk_dep) {
+        /* Set synchronous read timings */
-                if (gpmc_clk_ns < 12) { /* >83Mhz */
+        memset(&t, 0, sizeof(t));
-                        t_ces   = 3;
-                        t_avds  = 4;
-                } else if (gpmc_clk_ns < 15) { /* >66Mhz */
-                        t_ces   = 5;
-                        t_avds  = 4;
-                } else if (gpmc_clk_ns < 25) { /* >40Mhz */
-                        t_ces   = 6;
-                        t_avds  = 5;
-                } else {
-                        t_ces   = 7;
-                        t_avds  = 7;
-                }
-        }
-        if (first_time)
-                set_onenand_cfg(onenand_base, latency,
-                                        sync_read, sync_write, hf, vhf);
        if (div == 1) {
                reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
@@ -307,8 +277,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
                gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
        }
-        /* Set synchronous read timings */
-        memset(&t, 0, sizeof(t));
        t.sync_clk = min_gpmc_clk_period;
        t.cs_on = 0;
        t.adv_on = 0;
@@ -330,7 +298,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
                     ticks_cez);
        /* Write */
-        if (sync_write) {
+        if (onenand_flags & ONENAND_FLAG_SYNCWRITE) {
                t.adv_wr_off = t.adv_rd_off;
                t.we_on  = 0;
                t.we_off = t.cs_rd_off;
@@ -355,6 +323,14 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
                }
        }
+        return t;
+}
+static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t)
+{
+        unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD;
+        unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE;
        /* Configure GPMC for synchronous read */
        gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
                          GPMC_CONFIG1_WRAPBURST_SUPP |
@@ -371,11 +347,45 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
                          GPMC_CONFIG1_DEVICETYPE_NOR |
                          GPMC_CONFIG1_MUXADDDATA);
-        err = gpmc_cs_set_timings(cs, &t);
+        return gpmc_cs_set_timings(cs, t);
-        if (err)
+}
-                return err;
+static int omap2_onenand_setup_async(void __iomem *onenand_base)
+{
+        struct gpmc_timings t;
+        int ret;
+        omap2_onenand_set_async_mode(onenand_base);
-        set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf);
+        t = omap2_onenand_calc_async_timings();
+        ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
+        if (IS_ERR_VALUE(ret))
+                return ret;
+        omap2_onenand_set_async_mode(onenand_base);
+        return 0;
+}
+static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
+{
+        int ret, freq = *freq_ptr;
+        struct gpmc_timings t;
+        if (!freq) {
+                /* Very first call freq is not known */
+                freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base);
+                set_onenand_cfg(onenand_base);
+        }
+        t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq);
+        ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t);
+        if (IS_ERR_VALUE(ret))
+                return ret;
+        set_onenand_cfg(onenand_base);
        *freq_ptr = freq;
@@ -385,15 +395,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 {
        struct device *dev = &gpmc_onenand_device.dev;
+        unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE;
+        int ret;
-        /* Set sync timings in GPMC */
+        ret = omap2_onenand_setup_async(onenand_base);
-        if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+        if (ret) {
-                        freq_ptr) < 0) {
+                dev_err(dev, "unable to set to async mode\n");
-                dev_err(dev, "Unable to set synchronous mode\n");
+                return ret;
-                return -EINVAL;
        }
-        return 0;
+        if (!(gpmc_onenand_data->flags & l))
+                return 0;
+        ret = omap2_onenand_setup_sync(onenand_base, freq_ptr);
+        if (ret)
+                dev_err(dev, "unable to set to sync mode\n");
+        return ret;
 }
 void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
@@ -411,6 +428,11 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
                gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
        }
+        if (cpu_is_omap34xx())
+                gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX;
+        else
+                gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX;
        err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
                                (unsigned long *)&gpmc_onenand_resource.start);
        if (err < 0) {
diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h
new file mode 100644
index 000000000000..216f23a8b45c
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/mach-omap2/gpmc-onenand.h
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef __OMAP2_GPMC_ONENAND_H
+#define __OMAP2_GPMC_ONENAND_H
+#include <linux/platform_data/mtd-onenand-omap2.h>
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data      NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif
+#endif
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 565475310374..6eed907d594c 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smc91x.h"
 #include "soc.h"
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 249a0b440cd6..ef990118d32b 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smsc911x.h"
 static struct resource gpmc_smsc911x_resources[] = {
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 5ac5cf30406a..6af1a5d98e6f 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -26,16 +26,14 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/mach-types.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
-#include <plat/cpu.h>
+#include <asm/mach-types.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/omap_device.h>
 #include "soc.h"
 #include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
 #define DEVICE_NAME             "omap-gpmc"
@@ -59,6 +57,9 @@
 #define GPMC_ECC_SIZE_CONFIG    0x1fc
 #define GPMC_ECC1_RESULT        0x200
 #define GPMC_ECC_BCH_RESULT_0   0x240   /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_1   0x244   /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_2   0x248   /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_3   0x24c   /* not available on OMAP2 */
 /* GPMC ECC control settings */
 #define GPMC_ECC_CTRL_ECCCLEAR          0x100
@@ -75,6 +76,7 @@
 #define GPMC_CS0_OFFSET         0x60
 #define GPMC_CS_SIZE            0x30
+#define GPMC_BCH_SIZE           0x10
 #define GPMC_MEM_START          0x00000000
 #define GPMC_MEM_END            0x3FFFFFFF
@@ -137,7 +139,6 @@ static struct resource	gpmc_mem_root;
 static struct resource  gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 static unsigned int gpmc_cs_map;        /* flag for cs which are initialized */
-static int gpmc_ecc_used = -EINVAL;     /* cs using ecc engine */
 static struct device *gpmc_dev;
 static int gpmc_irq;
 static resource_size_t phys_base, mem_size;
@@ -158,22 +159,6 @@ static u32 gpmc_read_reg(int idx)
        return __raw_readl(gpmc_base + idx);
 }
-static void gpmc_cs_write_byte(int cs, int idx, u8 val)
-{
-        void __iomem *reg_addr;
-        reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-        __raw_writeb(val, reg_addr);
-}
-static u8 gpmc_cs_read_byte(int cs, int idx)
-{
-        void __iomem *reg_addr;
-        reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-        return __raw_readb(reg_addr);
-}
 void gpmc_cs_write_reg(int cs, int idx, u32 val)
 {
        void __iomem *reg_addr;
@@ -288,7 +273,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
                return -1
 #endif
-int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+int gpmc_calc_divider(unsigned int sync_clk)
 {
        int div;
        u32 l;
@@ -308,7 +293,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
        int div;
        u32 l;
-        div = gpmc_cs_calc_divider(cs, t->sync_clk);
+        div = gpmc_calc_divider(t->sync_clk);
        if (div < 0)
                return div;
@@ -509,44 +494,6 @@ void gpmc_cs_free(int cs)
 EXPORT_SYMBOL(gpmc_cs_free);
 /**
- * gpmc_read_status - read access request to get the different gpmc status
- * @cmd: command type
- * @return status
- */
-int gpmc_read_status(int cmd)
-{
-        int     status = -EINVAL;
-        u32     regval = 0;
-        switch (cmd) {
-        case GPMC_GET_IRQ_STATUS:
-                status = gpmc_read_reg(GPMC_IRQSTATUS);
-                break;
-        case GPMC_PREFETCH_FIFO_CNT:
-                regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
-                status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
-                break;
-        case GPMC_PREFETCH_COUNT:
-                regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
-                status = GPMC_PREFETCH_STATUS_COUNT(regval);
-                break;
-        case GPMC_STATUS_BUFFER:
-                regval = gpmc_read_reg(GPMC_STATUS);
-                /* 1 : buffer is available to write */
-                status = regval & GPMC_STATUS_BUFF_EMPTY;
-                break;
-        default:
-                printk(KERN_ERR "gpmc_read_status: Not supported\n");
-        }
-        return status;
-}
-EXPORT_SYMBOL(gpmc_read_status);
-/**
 * gpmc_cs_configure - write request to configure gpmc
 * @cs: chip select number
 * @cmd: command type
@@ -614,121 +561,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
 }
 EXPORT_SYMBOL(gpmc_cs_configure);
-/**
- * gpmc_nand_read - nand specific read access request
- * @cs: chip select number
- * @cmd: command type
- */
-int gpmc_nand_read(int cs, int cmd)
-{
-        int rval = -EINVAL;
-        switch (cmd) {
-        case GPMC_NAND_DATA:
-                rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
-                break;
-        default:
-                printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
-        }
-        return rval;
-}
-EXPORT_SYMBOL(gpmc_nand_read);
-/**
- * gpmc_nand_write - nand specific write request
- * @cs: chip select number
- * @cmd: command type
- * @wval: value to write
- */
-int gpmc_nand_write(int cs, int cmd, int wval)
-{
-        int err = 0;
-        switch (cmd) {
-        case GPMC_NAND_COMMAND:
-                gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
-                break;
-        case GPMC_NAND_ADDRESS:
-                gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
-                break;
-        case GPMC_NAND_DATA:
-                gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
-        default:
-                printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
-                err = -EINVAL;
-        }
-        return err;
-}
-EXPORT_SYMBOL(gpmc_nand_write);
-/**
- * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: cs (chip select) number
- * @fifo_th: fifo threshold to be used for read/ write
- * @dma_mode: dma mode enable (1) or disable (0)
- * @u32_count: number of bytes to be transferred
- * @is_write: prefetch read(0) or write post(1) mode
- */
-int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-                                unsigned int u32_count, int is_write)
-{
-        if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
-                pr_err("gpmc: fifo threshold is not supported\n");
-                return -1;
-        } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
-                /* Set the amount of bytes to be prefetched */
-                gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
-                /* Set dma/mpu mode, the prefetch read / post write and
-                 * enable the engine. Set which cs is has requested for.
-                 */
-                gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
-                                        PREFETCH_FIFOTHRESHOLD(fifo_th) |
-                                        ENABLE_PREFETCH |
-                                        (dma_mode << DMA_MPU_MODE) |
-                                        (0x1 & is_write)));
-                /*  Start the prefetch engine */
-                gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
-        } else {
-                return -EBUSY;
-        }
-        return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_enable);
-/**
- * gpmc_prefetch_reset - disables and stops the prefetch engine
- */
-int gpmc_prefetch_reset(int cs)
-{
-        u32 config1;
-        /* check if the same module/cs is trying to reset */
-        config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
-        if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
-                return -EINVAL;
-        /* Stop the PFPW engine */
-        gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
-        /* Reset/disable the PFPW engine */
-        gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-        return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
 void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
 {
+        int i;
        reg->gpmc_status = gpmc_base + GPMC_STATUS;
        reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
                                GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
@@ -744,7 +580,17 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
        reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
        reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
        reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
-        reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+        for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
+                reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
+                                           GPMC_BCH_SIZE * i;
+                reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
+                                           GPMC_BCH_SIZE * i;
+                reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
+                                           GPMC_BCH_SIZE * i;
+                reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
+                                           GPMC_BCH_SIZE * i;
+        }
 }
 int gpmc_get_client_irq(unsigned irq_config)
@@ -1079,267 +925,3 @@ void omap3_gpmc_restore_context(void)
        }
 }
 #endif /* CONFIG_ARCH_OMAP3 */
-/**
- * gpmc_enable_hwecc - enable hardware ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @ecc_size: bytes for which ECC will be generated
- */
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
-{
-        unsigned int val;
-        /* check if ecc module is in used */
-        if (gpmc_ecc_used != -EINVAL)
-                return -EINVAL;
-        gpmc_ecc_used = cs;
-        /* clear ecc and enable bits */
-        gpmc_write_reg(GPMC_ECC_CONTROL,
-                        GPMC_ECC_CTRL_ECCCLEAR |
-                        GPMC_ECC_CTRL_ECCREG1);
-        /* program ecc and result sizes */
-        val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
-        gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
-        switch (mode) {
-        case GPMC_ECC_READ:
-        case GPMC_ECC_WRITE:
-                gpmc_write_reg(GPMC_ECC_CONTROL,
-                                GPMC_ECC_CTRL_ECCCLEAR |
-                                GPMC_ECC_CTRL_ECCREG1);
-                break;
-        case GPMC_ECC_READSYN:
-                gpmc_write_reg(GPMC_ECC_CONTROL,
-                                GPMC_ECC_CTRL_ECCCLEAR |
-                                GPMC_ECC_CTRL_ECCDISABLE);
-                break;
-        default:
-                printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
-                break;
-        }
-        /* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-        val = (dev_width << 7) | (cs << 1) | (0x1);
-        gpmc_write_reg(GPMC_ECC_CONFIG, val);
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
-/**
- * gpmc_calculate_ecc - generate non-inverted ecc bytes
- * @cs: chip select number
- * @dat: data pointer over which ecc is computed
- * @ecc_code: ecc code buffer
- *
- * Using non-inverted ECC is considered ugly since writing a blank
- * page (padding) will clear the ECC bytes. This is not a problem as long
- * no one is trying to write data on the seemingly unused page. Reading
- * an erased page will produce an ECC mismatch between generated and read
- * ECC bytes that has to be dealt with separately.
- */
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
-{
-        unsigned int val = 0x0;
-        if (gpmc_ecc_used != cs)
-                return -EINVAL;
-        /* read ecc result */
-        val = gpmc_read_reg(GPMC_ECC1_RESULT);
-        *ecc_code++ = val;          /* P128e, ..., P1e */
-        *ecc_code++ = val >> 16;    /* P128o, ..., P1o */
-        /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
-        *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-        gpmc_ecc_used = -EINVAL;
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
-#ifdef CONFIG_ARCH_OMAP3
-/**
- * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
- * @cs: chip select number
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- *
- * This function must be executed before any call to gpmc_enable_hwecc_bch.
- */
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
-{
-        /* check if ecc module is in use */
-        if (gpmc_ecc_used != -EINVAL)
-                return -EINVAL;
-        /* support only OMAP3 class */
-        if (!cpu_is_omap34xx()) {
-                printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
-                return -EINVAL;
-        }
-        /*
-         * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
-         * Other chips may be added if confirmed to work.
-         */
-        if ((nerrors == 4) &&
-            (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
-                printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
-                return -EINVAL;
-        }
-        /* sanity check */
-        if (nsectors > 8) {
-                printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
-                       nsectors);
-                return -EINVAL;
-        }
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
-/**
- * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- */
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
-                          int nerrors)
-{
-        unsigned int val;
-        /* check if ecc module is in use */
-        if (gpmc_ecc_used != -EINVAL)
-                return -EINVAL;
-        gpmc_ecc_used = cs;
-        /* clear ecc and enable bits */
-        gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
-        /*
-         * When using BCH, sector size is hardcoded to 512 bytes.
-         * Here we are using wrapping mode 6 both for reading and writing, with:
-         *  size0 = 0  (no additional protected byte in spare area)
-         *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
-         */
-        gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
-        /* BCH configuration */
-        val = ((1                        << 16) | /* enable BCH */
-               (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
-               (0x06                     <<  8) | /* wrap mode = 6 */
-               (dev_width                <<  7) | /* bus width */
-               (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
-               (cs                       <<  1) | /* ECC CS */
-               (0x1));                            /* enable ECC */
-        gpmc_write_reg(GPMC_ECC_CONFIG, val);
-        gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
-/**
- * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
- * @cs:  chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
-{
-        int i;
-        unsigned long nsectors, reg, val1, val2;
-        if (gpmc_ecc_used != cs)
-                return -EINVAL;
-        nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-        for (i = 0; i < nsectors; i++) {
-                reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-                /* Read hw-computed remainder */
-                val1 = gpmc_read_reg(reg + 0);
-                val2 = gpmc_read_reg(reg + 4);
-                /*
-                 * Add constant polynomial to remainder, in order to get an ecc
-                 * sequence of 0xFFs for a buffer filled with 0xFFs; and
-                 * left-justify the resulting polynomial.
-                 */
-                *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
-                *ecc++ = 0x13 ^ ((val2 >>  4) & 0xFF);
-                *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
-                *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
-                *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
-                *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
-                *ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
-        }
-        gpmc_ecc_used = -EINVAL;
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
-/**
- * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
- * @cs:  chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
-{
-        int i;
-        unsigned long nsectors, reg, val1, val2, val3, val4;
-        if (gpmc_ecc_used != cs)
-                return -EINVAL;
-        nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-        for (i = 0; i < nsectors; i++) {
-                reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-                /* Read hw-computed remainder */
-                val1 = gpmc_read_reg(reg + 0);
-                val2 = gpmc_read_reg(reg + 4);
-                val3 = gpmc_read_reg(reg + 8);
-                val4 = gpmc_read_reg(reg + 12);
-                /*
-                 * Add constant polynomial to remainder, in order to get an ecc
-                 * sequence of 0xFFs for a buffer filled with 0xFFs.
-                 */
-                *ecc++ = 0xef ^ (val4 & 0xFF);
-                *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
-                *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
-                *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
-                *ecc++ = 0xed ^ (val3 & 0xFF);
-                *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
-                *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
-                *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
-                *ecc++ = 0x97 ^ (val2 & 0xFF);
-                *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
-                *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
-                *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
-                *ecc++ = 0xb5 ^ (val1 & 0xFF);
-        }
-        gpmc_ecc_used = -EINVAL;
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
-#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/mach-omap2/gpmc.h
index 2e6e2597178c..79f4dfc2adb3 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/mach-omap2/gpmc.h
@@ -11,6 +11,8 @@
 #ifndef __OMAP2_GPMC_H
 #define __OMAP2_GPMC_H
+#include <linux/platform_data/mtd-nand-omap2.h>
 /* Maximum Number of Chip Selects */
 #define GPMC_CS_NUM             8
@@ -32,15 +34,6 @@
 #define GPMC_SET_IRQ_STATUS     0x00000004
 #define GPMC_CONFIG_WP          0x00000005
-#define GPMC_GET_IRQ_STATUS     0x00000006
-#define GPMC_PREFETCH_FIFO_CNT  0x00000007 /* bytes available in FIFO for r/w */
-#define GPMC_PREFETCH_COUNT     0x00000008 /* remaining bytes to be read/write*/
-#define GPMC_STATUS_BUFFER      0x00000009 /* 1: buffer is available to write */
-#define GPMC_NAND_COMMAND       0x0000000a
-#define GPMC_NAND_ADDRESS       0x0000000b
-#define GPMC_NAND_DATA          0x0000000c
 #define GPMC_ENABLE_IRQ         0x0000000d
 /* ECC commands */
@@ -76,25 +69,10 @@
 #define GPMC_DEVICETYPE_NOR             0
 #define GPMC_DEVICETYPE_NAND            2
 #define GPMC_CONFIG_WRITEPROTECT        0x00000010
-#define GPMC_STATUS_BUFF_EMPTY          0x00000001
 #define WR_RD_PIN_MONITORING            0x00600000
-#define GPMC_PREFETCH_STATUS_FIFO_CNT(val)      ((val >> 24) & 0x7F)
-#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
 #define GPMC_IRQ_FIFOEVENTENABLE        0x01
 #define GPMC_IRQ_COUNT_EVENT            0x02
-#define PREFETCH_FIFOTHRESHOLD_MAX      0x40
-#define PREFETCH_FIFOTHRESHOLD(val)     ((val) << 8)
-enum omap_ecc {
-                /* 1-bit ecc: stored at end of spare area */
-        OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
-        OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
-                /* 1-bit ecc: stored at beginning of spare area as romcode */
-        OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
-        OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
-        OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
-};
 /*
 * Note that all values in this struct are in nanoseconds except sync_clk
@@ -133,22 +111,6 @@ struct gpmc_timings {
        u16 wr_data_mux_bus;    /* WRDATAONADMUXBUS */
 };
-struct gpmc_nand_regs {
-        void __iomem    *gpmc_status;
-        void __iomem    *gpmc_nand_command;
-        void __iomem    *gpmc_nand_address;
-        void __iomem    *gpmc_nand_data;
-        void __iomem    *gpmc_prefetch_config1;
-        void __iomem    *gpmc_prefetch_config2;
-        void __iomem    *gpmc_prefetch_control;
-        void __iomem    *gpmc_prefetch_status;
-        void __iomem    *gpmc_ecc_config;
-        void __iomem    *gpmc_ecc_control;
-        void __iomem    *gpmc_ecc_size_config;
-        void __iomem    *gpmc_ecc1_result;
-        void __iomem    *gpmc_bch_result0;
-};
 extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
 extern int gpmc_get_client_irq(unsigned irq_config);
@@ -160,31 +122,14 @@ extern unsigned long gpmc_get_fclk_period(void);
 extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
 extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_calc_divider(unsigned int sync_clk);
 extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
 extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-                                        unsigned int u32_count, int is_write);
-extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
-extern int gpmc_read_status(int cmd);
 extern int gpmc_cs_configure(int cs, int cmd, int wval);
-extern int gpmc_nand_read(int cs, int cmd);
-extern int gpmc_nand_write(int cs, int cmd, int wval);
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
-#ifdef CONFIG_ARCH_OMAP3
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
-                          int nerrors);
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
-#endif /* CONFIG_ARCH_OMAP3 */
 #endif
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index e003f2bba30c..3da8900598c8 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -27,8 +27,8 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "hdq1w.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h
index 0c1efc846d8d..c7e08d2a7a46 100644
--- a/arch/arm/mach-omap2/hdq1w.h
+++ b/arch/arm/mach-omap2/hdq1w.h
@@ -21,7 +21,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
 #define ARCH_ARM_MACH_OMAP2_HDQ1W_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 /*
 * XXX A future cleanup patch should modify
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 4d3a6324155f..e3406dce59be 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -17,11 +17,12 @@
 #include <mach/hardware.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <plat/mmc.h>
+#include "soc.h"
-#include <plat/omap-pm.h>
+#include "omap_device.h"
-#include <plat/omap_device.h>
+#include "omap-pm.h"
 #include "mux.h"
+#include "mmc.h"
 #include "hsmmc.h"
 #include "control.h"
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 8763c8520dc2..1df9b5feda16 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -21,8 +21,8 @@
 #include <linux/err.h>
 #include <linux/hwspinlock.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
 static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
        .base_id = 0,
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index fc57e67b321f..ad55b943108f 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -19,11 +19,13 @@
 *
 */
-#include <plat/i2c.h>
+#include "soc.h"
 #include "common.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
 #include "mux.h"
+#include "i2c.h"
 /* In register I2C_CON, Bit 15 is the I2C enable bit */
 #define I2C_EN                                  BIT(15)
@@ -33,7 +35,9 @@
 /* Maximum microseconds to wait for OMAP module to softreset */
 #define MAX_MODULE_SOFTRESET_WAIT       10000
-void __init omap2_i2c_mux_pins(int bus_id)
+#define MAX_OMAP_I2C_HWMOD_NAME_LEN     16
+static void __init omap2_i2c_mux_pins(int bus_id)
 {
        char mux_name[sizeof("i2c2_scl.i2c2_scl")];
@@ -104,3 +108,46 @@ int omap_i2c_reset(struct omap_hwmod *oh)
        return 0;
 }
+static const char name[] = "omap_i2c";
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+                                int bus_id)
+{
+        int l;
+        struct omap_hwmod *oh;
+        struct platform_device *pdev;
+        char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
+        struct omap_i2c_bus_platform_data *pdata;
+        struct omap_i2c_dev_attr *dev_attr;
+        omap2_i2c_mux_pins(bus_id);
+        l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
+        WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
+                "String buffer overflow in I2C%d device setup\n", bus_id);
+        oh = omap_hwmod_lookup(oh_name);
+        if (!oh) {
+                        pr_err("Could not look up %s\n", oh_name);
+                        return -EEXIST;
+        }
+        pdata = i2c_pdata;
+        /*
+         * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
+         * use, and functionality implementation flags, up to the OMAP I2C
+         * driver via platform data
+         */
+        pdata->rev = oh->class->rev;
+        dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
+        pdata->flags = dev_attr->flags;
+        pdev = omap_device_build(name, bus_id, oh, pdata,
+                        sizeof(struct omap_i2c_bus_platform_data),
+                        NULL, 0, 0);
+        WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
+        return PTR_RET(pdev);
+}
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/mach-omap2/i2c.h
index 7c22b9e10dc3..81dbb992a6bc 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/mach-omap2/i2c.h
@@ -18,24 +18,11 @@
 * 02110-1301 USA
 *
 */
-#ifndef __ASM__ARCH_OMAP_I2C_H
-#define __ASM__ARCH_OMAP_I2C_H
-#include <linux/i2c.h>
+#include "../plat-omap/i2c.h"
-#include <linux/i2c-omap.h>
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+#ifndef __MACH_OMAP2_I2C_H
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+#define __MACH_OMAP2_I2C_H
-                                 struct i2c_board_info const *info,
-                                 unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
-                                 struct i2c_board_info const *info,
-                                 unsigned len)
-{
-        return 0;
-}
-#endif
 /**
 * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
@@ -50,10 +37,6 @@ struct omap_i2c_dev_attr {
        u32     flags;
 };
-void __init omap1_i2c_mux_pins(int bus_id);
-void __init omap2_i2c_mux_pins(int bus_id);
-struct omap_hwmod;
 int omap_i2c_reset(struct omap_hwmod *oh);
-#endif /* __ASM__ARCH_OMAP_I2C_H */
+#endif  /* __MACH_OMAP2_I2C_H */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4234d28dc171..80d1cf17af8c 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -25,14 +25,12 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
 #include <plat/serial.h>
-#include <plat/omap-pm.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/multi.h>
-#include <plat/dma.h>
+#include "../plat-omap/sram.h"
+#include "omap_hwmod.h"
 #include "soc.h"
 #include "iomap.h"
 #include "voltage.h"
@@ -43,6 +41,8 @@
 #include "clock2xxx.h"
 #include "clock3xxx.h"
 #include "clock44xx.h"
+#include "omap-pm.h"
+#include "sdrc.h"
 /*
 * The machine specific code may provide the extra mapping besides the
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 37f8f948047b..a106c75c5338 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,11 +19,12 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dma.h>
-#include <plat/omap_device.h>
 #include <linux/pm_runtime.h>
+#include <plat-omap/dma-omap.h>
+#include "omap_device.h"
 /*
 * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
 * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h
new file mode 100644
index 000000000000..0cd4b089da9c
--- /dev/null
+++ b/arch/arm/mach-omap2/mmc.h
@@ -0,0 +1,23 @@
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+#define OMAP24XX_NR_MMC         2
+#define OMAP2420_MMC_SIZE       OMAP1_MMC_SIZE
+#define OMAP2_MMC1_BASE         0x4809c000
+#define OMAP4_MMC_REG_OFFSET    0x100
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
+#else
+static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+}
+#endif
+struct omap_hwmod;
+int omap_msdi_reset(struct omap_hwmod *oh);
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
+                                        int is_closed);
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index 9e57b4aadb06..627e97e30743 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -25,13 +25,12 @@
 #include <linux/err.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/mmc.h>
 #include "common.h"
 #include "control.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
 #include "mux.h"
+#include "mmc.h"
 /*
 * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 701e17cba468..26126343d6ac 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -36,8 +36,9 @@
 #include <linux/interrupt.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
+#include "soc.h"
 #include "control.h"
 #include "mux.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index ff4e6a0e9c7c..3f5fd7e3549d 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -50,6 +50,7 @@
 #include <asm/suspend.h>
 #include <asm/hardware/cache-l2x0.h>
+#include "soc.h"
 #include "common.h"
 #include "omap44xx.h"
 #include "omap4-sar-layout.h"
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h
index 67faa7b8fe92..67faa7b8fe92 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/mach-omap2/omap-pm.h
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index e089e4d1ae38..b970440cffca 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -18,7 +18,6 @@
 #include <asm/cacheflush.h>
 #include <asm/memblock.h>
-#include <plat/omap-secure.h>
 #include "omap-secure.h"
 static phys_addr_t omap_secure_memblock_base;
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index c90a43589abe..0e729170c46b 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -52,6 +52,13 @@ extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
                                u32 arg1, u32 arg2, u32 arg3, u32 arg4);
 extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
 extern phys_addr_t omap_secure_ram_mempool_base(void);
+extern int omap_secure_ram_reserve_memblock(void);
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
 #endif /* __ASSEMBLER__ */
 #endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index e1f289748c5d..d25845c471da 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -25,16 +25,15 @@
 #include <asm/mach/map.h>
 #include <asm/memblock.h>
-#include <plat/sram.h>
+#include "../plat-omap/sram.h"
-#include <plat/omap-secure.h>
-#include <plat/mmc.h>
 #include "omap-wakeupgen.h"
 #include "soc.h"
 #include "common.h"
+#include "mmc.h"
 #include "hsmmc.h"
 #include "omap4-sar-layout.h"
+#include "omap-secure.h"
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 7a7d1f2a65e9..0ef934fec364 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -89,9 +89,8 @@
 #include <linux/of.h>
 #include <linux/notifier.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/clock.h>
 /* These parameters are passed to _omap_device_{de,}activate() */
 #define USE_WAKEUP_LAT                  0
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/mach-omap2/omap_device.h
index 106f50665804..0933c599bf89 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -34,7 +34,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 extern struct dev_pm_domain omap_device_pm_domain;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b969ab1d258b..87eee3b62a3c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -139,8 +139,8 @@
 #include <linux/slab.h>
 #include <linux/bootmem.h>
-#include <plat/clock.h>
+#include "clock.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include <plat/prcm.h>
 #include "soc.h"
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index b3349f7b1a2c..87b59b45c678 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -35,7 +35,6 @@
 #include <linux/list.h>
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
-#include <plat/cpu.h>
 struct omap_device;
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index b5db6007c523..3efed3d633d1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -12,21 +12,23 @@
 * XXX handle crossbar/shared link difference for L3?
 * XXX these should be marked initdata for multi-OMAP kernels
 */
+#include <linux/i2c-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/omap_hwmod.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
 #include <plat/dmtimer.h>
+#include "omap_hwmod.h"
 #include "l3_2xxx.h"
 #include "l4_2xxx.h"
-#include <plat/mmc.h>
 #include "omap_hwmod_common_data.h"
 #include "cm-regbits-24xx.h"
 #include "prm-regbits-24xx.h"
+#include "i2c.h"
+#include "mmc.h"
 #include "wd_timer.h"
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c455e41b0237..dc768c50e523 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -12,21 +12,23 @@
 * XXX handle crossbar/shared link difference for L3?
 * XXX these should be marked initdata for multi-OMAP kernels
 */
+#include <linux/i2c-omap.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/omap_hwmod.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
 #include <plat/dmtimer.h>
-#include <plat/mmc.h>
+#include "omap_hwmod.h"
+#include "mmc.h"
 #include "l3_2xxx.h"
 #include "soc.h"
 #include "omap_hwmod_common_data.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
+#include "i2c.h"
 #include "wd_timer.h"
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
index cbb4ef6544ad..74ae76767510 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -13,9 +13,10 @@
 */
 #include <asm/sizes.h>
-#include <plat/omap_hwmod.h>
 #include <plat/serial.h>
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 8851bbb6bb24..57fc2f95584d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -9,13 +9,17 @@
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
-#include <plat/omap_hwmod.h>
 #include <plat/serial.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/common.h>
+#include "../plat-omap/common.h"
+#include "omap_hwmod.h"
 #include "hdq1w.h"
 #include "omap_hwmod_common_data.h"
+#include "dma.h"
 /* UART */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 1a1287d62648..dd3809c8f409 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -13,8 +13,9 @@
 */
 #include <asm/sizes.h>
-#include <plat/omap_hwmod.h>
 #include <plat/serial.h>
+#include "omap_hwmod.h"
 #include "l3_2xxx.h"
 #include "l4_2xxx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index bd9220ed5ab9..27bdff46fda0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -8,13 +8,14 @@
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
-#include <plat/omap_hwmod.h>
 #include <plat/serial.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <plat/dmtimer.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "cm-regbits-24xx.h"
 #include "prm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 59d5c1cd316d..ad8d43b33273 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -14,13 +14,11 @@
 * GNU General Public License for more details.
 */
-#include <plat/omap_hwmod.h>
+#include <linux/i2c-omap.h>
-#include <plat/cpu.h>
+#include "omap_hwmod.h"
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
-#include <plat/i2c.h>
 #include "omap_hwmod_common_data.h"
@@ -28,6 +26,8 @@
 #include "cm33xx.h"
 #include "prm33xx.h"
 #include "prm-regbits-33xx.h"
+#include "i2c.h"
+#include "mmc.h"
 /*
 * IP blocks
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f67b7ee07dd4..d5d52a776278 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -14,16 +14,16 @@
 *
 * XXX these should be marked initdata for multi-OMAP kernels
 */
+#include <linux/i2c-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
 #include <plat/serial.h>
 #include "l3_3xxx.h"
 #include "l4_3xxx.h"
-#include <plat/i2c.h>
-#include <plat/mmc.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <plat/dmtimer.h>
@@ -32,9 +32,14 @@
 #include "am35xx.h"
 #include "soc.h"
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
+#include "dma.h"
+#include "i2c.h"
+#include "mmc.h"
 #include "wd_timer.h"
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 652d0285bd6d..5b9be734709c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -21,22 +21,25 @@
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/power/smartreflex.h>
+#include <linux/i2c-omap.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/i2c.h>
-#include <plat/dma.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/mmc.h>
 #include <plat/dmtimer.h>
-#include <plat/common.h>
 #include <plat/iommu.h>
+#include "../plat-omap/common.h"
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
+#include "i2c.h"
+#include "mmc.h"
 #include "wd_timer.h"
 /* Base offset for all OMAP4 interrupts external to MPUSS */
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 9f1ccdc8cc8c..79d623b83e49 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -16,7 +16,7 @@
 * data and their integration with other OMAP modules and Linux.
 */
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 2bc8f1705d4a..cfcce299177c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -13,7 +13,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
 #define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "common.h"
 #include "display.h"
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index c784c12f98a1..7e437bf6024c 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
 #define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "voltage.h"
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index f515a1a056d5..2bf35dc091be 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/i2c/twl.h>
+#include "soc.h"
 #include "voltage.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index 58e16aef40bb..bd41d59a7cab 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -20,7 +20,7 @@
 #include <linux/opp.h>
 #include <linux/cpu.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "omap_opp_data.h"
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index 75cef5f67a8a..62772e0e0d69 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -19,6 +19,7 @@
 */
 #include <linux/module.h>
+#include "soc.h"
 #include "control.h"
 #include "omap_opp_data.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 46092cd806fa..3cf4fdfd7ab0 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -27,12 +27,13 @@
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <plat/clock.h>
+#include "clock.h"
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
+#include "soc.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index ea61c32957bd..331478f9b864 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -20,10 +20,11 @@
 #include <asm/system_misc.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "common.h"
+#include "soc.h"
 #include "prcm-common.h"
 #include "voltage.h"
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 8af6cd6ac331..6d17e044ffb8 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -36,11 +36,13 @@
 #include <asm/mach-types.h>
 #include <asm/system_misc.h>
-#include <plat/clock.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/sram.h>
-#include <plat/dma.h>
+#include "../plat-omap/sram.h"
+#include "soc.h"
 #include "common.h"
+#include "clock.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ba670db1fd37..160fa250c41e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -35,17 +35,18 @@
 #include <asm/suspend.h>
 #include <asm/system_misc.h>
-#include <plat/sram.h>
 #include "clockdomain.h"
 #include "powerdomain.h"
-#include <plat/sdrc.h>
 #include <plat/prcm.h>
-#include <plat/gpmc.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
+#include "../plat-omap/sram.h"
+#include "soc.h"
 #include "common.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
+#include "gpmc.h"
 #include "prm-regbits-34xx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 04922d149068..7da75aed1514 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <asm/system_misc.h>
+#include "soc.h"
 #include "common.h"
 #include "clockdomain.h"
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 2a791766283d..3cf79b54ce61 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -15,8 +15,9 @@
 #include <asm/pmu.h>
-#include <plat/omap_hwmod.h>
+#include "soc.h"
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
 static char *omap2_pmu_oh_names[] = {"mpu"};
 static char *omap3_pmu_oh_names[] = {"mpu", "debugss"};
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index baee90608d11..5277d56eb37f 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -22,8 +22,6 @@
 #include <linux/atomic.h>
-#include <plat/cpu.h>
 #include "voltage.h"
 /* Powerdomain basic power states */
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index 2385c1f009ee..ba520d4f7c7b 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include "soc.h"
 #include "powerdomain.h"
 #include "powerdomains2xxx_3xxx_data.h"
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 0f51e034e0aa..cff270a178c5 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -28,6 +28,7 @@
 #include "common.h"
 #include <plat/prcm.h>
+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index e7dbb6cf1255..624ade5c3c33 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -19,7 +19,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
-#include <plat/common.h>
+#include "../plat-omap/common.h"
 #include "common.h"
 #include "prm33xx.h"
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 6b4d332be2f6..6fabbd816d6b 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,7 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
-#include <plat/common.h>
+#include "../plat-omap/common.h"
 #include <plat/prcm.h>
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
index 8bfaf342a028..1ee58c281a31 100644
--- a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
+++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
@@ -11,7 +11,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
 #define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-#include <plat/sdrc.h>
+#include "sdrc.h"
 /* Hynix H8MBX00U0MER-0EM */
 static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
index a391b4939f74..85cccc004c06 100644
--- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
 #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-#include <plat/sdrc.h>
+#include "sdrc.h"
 /* Micron MT46H32M32LF-6 */
 /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c
index 845c4fd2b125..0fa7ffa9b5ed 100644
--- a/arch/arm/mach-omap2/sdram-nokia.c
+++ b/arch/arm/mach-omap2/sdram-nokia.c
@@ -18,10 +18,8 @@
 #include <linux/io.h>
 #include "common.h"
-#include <plat/clock.h>
-#include <plat/sdrc.h>
 #include "sdram-nokia.h"
+#include "sdrc.h"
 /* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
 struct sdram_timings {
diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
index cd4352917022..003f7bf4e2e3 100644
--- a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
+++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
@@ -11,7 +11,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
 #define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-#include <plat/sdrc.h>
+#include "sdrc.h"
 /* Numonyx  M65KXXXXAM */
 static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
index 0e518a72831f..8dc3de5ebb5b 100644
--- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-#include <plat/sdrc.h>
+#include "sdrc.h"
 /* Qimonda HYB18M512160AF-6 */
 static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index e3d345f46409..94d4082f87ed 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -23,11 +23,10 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include "common.h"
+#include "../plat-omap/sram.h"
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
+#include "common.h"
+#include "clock.h"
 #include "sdrc.h"
 static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
@@ -160,19 +159,3 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
        sdrc_write_reg(l, SDRC_POWER);
        omap2_sms_save_context();
 }
-void omap2_sms_write_rot_control(u32 val, unsigned ctx)
-{
-        sms_write_reg(val, SMS_ROT_CONTROL(ctx));
-}
-void omap2_sms_write_rot_size(u32 val, unsigned ctx)
-{
-        sms_write_reg(val, SMS_ROT_SIZE(ctx));
-}
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
-{
-        sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx));
-}
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index b3f83799e6cf..69c4b329452e 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -2,12 +2,14 @@
 #define __ARCH_ARM_MACH_OMAP2_SDRC_H
 /*
- * OMAP2 SDRC register definitions
+ * OMAP2/3 SDRC/SMS macros and prototypes
 *
- * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Nokia Corporation
 *
- * Written by Paul Walmsley
+ * Paul Walmsley
+ * Tony Lindgren
+ * Richard Woodruff
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
@@ -15,8 +17,6 @@
 */
 #undef DEBUG
-#include <plat/sdrc.h>
 #ifndef __ASSEMBLER__
 #include <linux/io.h>
@@ -50,6 +50,58 @@ static inline u32 sms_read_reg(u16 reg)
 {
        return __raw_readl(OMAP_SMS_REGADDR(reg));
 }
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip.  These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files.  The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+        unsigned long rate;
+        u32 actim_ctrla;
+        u32 actim_ctrlb;
+        u32 rfr_ctrl;
+        u32 mr;
+};
+#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
+void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+                            struct omap_sdrc_params *sdrc_cs1);
+#else
+static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+                                          struct omap_sdrc_params *sdrc_cs1) {};
+#endif
+int omap2_sdrc_get_params(unsigned long r,
+                          struct omap_sdrc_params **sdrc_cs0,
+                          struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+struct memory_timings {
+        u32 m_type;             /* ddr = 1, sdr = 0 */
+        u32 dll_mode;           /* use lock mode = 1, unlock mode = 0 */
+        u32 slow_dll_ctrl;      /* unlock mode, dll value for slow speed */
+        u32 fast_dll_ctrl;      /* unlock mode, dll value for fast speed */
+        u32 base_cs;            /* base chip select to use for calculations */
+};
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
 #else
 #define OMAP242X_SDRC_REGADDR(reg)                                      \
                        OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
@@ -57,6 +109,7 @@ static inline u32 sms_read_reg(u16 reg)
                        OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
 #define OMAP34XX_SDRC_REGADDR(reg)                                      \
                        OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif  /* __ASSEMBLER__ */
 /* Minimum frequency that the SDRC DLL can lock at */
@@ -74,4 +127,85 @@ static inline u32 sms_read_reg(u16 reg)
 */
 #define SDRC_MPURATE_LOOPS              96
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+#define SDRC_SYSCONFIG          0x010
+#define SDRC_CS_CFG             0x040
+#define SDRC_SHARING            0x044
+#define SDRC_ERR_TYPE           0x04C
+#define SDRC_DLLA_CTRL          0x060
+#define SDRC_DLLA_STATUS        0x064
+#define SDRC_DLLB_CTRL          0x068
+#define SDRC_DLLB_STATUS        0x06C
+#define SDRC_POWER              0x070
+#define SDRC_MCFG_0             0x080
+#define SDRC_MR_0               0x084
+#define SDRC_EMR2_0             0x08c
+#define SDRC_ACTIM_CTRL_A_0     0x09c
+#define SDRC_ACTIM_CTRL_B_0     0x0a0
+#define SDRC_RFR_CTRL_0         0x0a4
+#define SDRC_MANUAL_0           0x0a8
+#define SDRC_MCFG_1             0x0B0
+#define SDRC_MR_1               0x0B4
+#define SDRC_EMR2_1             0x0BC
+#define SDRC_ACTIM_CTRL_A_1     0x0C4
+#define SDRC_ACTIM_CTRL_B_1     0x0C8
+#define SDRC_RFR_CTRL_1         0x0D4
+#define SDRC_MANUAL_1           0x0D8
+#define SDRC_POWER_AUTOCOUNT_SHIFT      8
+#define SDRC_POWER_AUTOCOUNT_MASK       (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT        4
+#define SDRC_POWER_CLKCTRL_MASK         (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT  (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz    (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz    (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz    (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz    (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS    (0x00005000 | 1) /* Need to calc */
+/*
+ * SMS register access
+ */
+#define OMAP242X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+#define SMS_SYSCONFIG                   0x010
+/* REVISIT: fill in other SMS registers here */
 #endif
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 73e55e485329..3b8bfdf848d5 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,9 +24,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
+#include "../plat-omap/sram.h"
-#include <plat/sram.h>
-#include <plat/sdrc.h>
 #include "soc.h"
 #include "iomap.h"
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0405c8190803..12363f313f08 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -28,13 +28,14 @@
 #include <linux/console.h>
 #include <plat/omap-serial.h>
-#include "common.h"
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
 #include <plat/serial.h>
+#include "common.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
+#include "soc.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 506987979c1c..75afe11207ff 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -26,7 +26,7 @@
 #include <asm/assembler.h>
-#include <plat/sram.h>
+#include "../plat-omap/sram.h"
 #include "omap34xx.h"
 #include "iomap.h"
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index fc9b96daf851..070096496e20 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -1,7 +1,473 @@
-#include <plat/cpu.h>
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
 #include "omap24xx.h"
 #include "omap34xx.h"
 #include "omap44xx.h"
 #include "ti81xx.h"
 #include "am33xx.h"
 #include "omap54xx.h"
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+#ifdef CONFIG_SOC_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap4
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP5
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap5
+# endif
+#endif
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST          0
+#define OMAP2_DEVICE_TYPE_EMU           1
+#define OMAP2_DEVICE_TYPE_SEC           2
+#define OMAP2_DEVICE_TYPE_GP            3
+#define OMAP2_DEVICE_TYPE_BAD           4
+int omap_type(void);
+/*
+ * omap_rev bits:
+ * CPU id bits  (0730, 1510, 1710, 2422...)     [31:16]
+ * CPU revision (See _REV_ defined in cpu.h)    [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)   [07:00]
+ */
+unsigned int omap_rev(void);
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()     ((omap_rev() >> 8) & 0xff)
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap24xx():   True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():   True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():   True for OMAP2430
+ * cpu_is_omap343x():   True for OMAP3430
+ * cpu_is_omap443x():   True for OMAP4430
+ * cpu_is_omap446x():   True for OMAP4460
+ * cpu_is_omap447x():   True for OMAP4470
+ * soc_is_omap543x():   True for OMAP5430, OMAP5432
+ */
+#define GET_OMAP_CLASS  (omap_rev() & 0xff)
+#define IS_OMAP_CLASS(class, id)                        \
+static inline int is_omap ##class (void)                \
+{                                                       \
+        return (GET_OMAP_CLASS == (id)) ? 1 : 0;        \
+}
+#define GET_AM_CLASS    ((omap_rev() >> 24) & 0xff)
+#define IS_AM_CLASS(class, id)                          \
+static inline int is_am ##class (void)                  \
+{                                                       \
+        return (GET_AM_CLASS == (id)) ? 1 : 0;          \
+}
+#define GET_TI_CLASS    ((omap_rev() >> 24) & 0xff)
+#define IS_TI_CLASS(class, id)                  \
+static inline int is_ti ##class (void)          \
+{                                                       \
+        return (GET_TI_CLASS == (id)) ? 1 : 0;  \
+}
+#define GET_OMAP_SUBCLASS       ((omap_rev() >> 20) & 0x0fff)
+#define IS_OMAP_SUBCLASS(subclass, id)                  \
+static inline int is_omap ##subclass (void)             \
+{                                                       \
+        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
+}
+#define IS_TI_SUBCLASS(subclass, id)                    \
+static inline int is_ti ##subclass (void)               \
+{                                                       \
+        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
+}
+#define IS_AM_SUBCLASS(subclass, id)                    \
+static inline int is_am ##subclass (void)               \
+{                                                       \
+        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
+}
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
+IS_AM_CLASS(33xx, 0x33)
+IS_TI_CLASS(81xx, 0x81)
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
+IS_OMAP_SUBCLASS(446x, 0x446)
+IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
+IS_TI_SUBCLASS(816x, 0x816)
+IS_TI_SUBCLASS(814x, 0x814)
+IS_AM_SUBCLASS(335x, 0x335)
+#define cpu_is_omap24xx()               0
+#define cpu_is_omap242x()               0
+#define cpu_is_omap243x()               0
+#define cpu_is_omap34xx()               0
+#define cpu_is_omap343x()               0
+#define cpu_is_ti81xx()                 0
+#define cpu_is_ti816x()                 0
+#define cpu_is_ti814x()                 0
+#define soc_is_am35xx()                 0
+#define soc_is_am33xx()                 0
+#define soc_is_am335x()                 0
+#define cpu_is_omap44xx()               0
+#define cpu_is_omap443x()               0
+#define cpu_is_omap446x()               0
+#define cpu_is_omap447x()               0
+#define soc_is_omap54xx()               0
+#define soc_is_omap543x()               0
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP2)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()             is_omap24xx()
+# endif
+# if defined (CONFIG_SOC_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()             is_omap242x()
+# endif
+# if defined (CONFIG_SOC_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()             is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+#  undef  cpu_is_omap34xx
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap34xx()             is_omap34xx()
+#  define cpu_is_omap343x()             is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP2)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()             1
+# endif
+# if defined(CONFIG_SOC_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()             1
+# endif
+# if defined(CONFIG_SOC_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()             1
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+#  undef  cpu_is_omap34xx
+#  define cpu_is_omap34xx()             1
+# endif
+# if defined(CONFIG_SOC_OMAP3430)
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap343x()             1
+# endif
+#endif
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap2420():   True for OMAP2420
+ * cpu_is_omap2422():   True for OMAP2422
+ * cpu_is_omap2423():   True for OMAP2423
+ * cpu_is_omap2430():   True for OMAP2430
+ * cpu_is_omap3430():   True for OMAP3430
+ */
+#define GET_OMAP_TYPE   ((omap_rev() >> 16) & 0xffff)
+#define IS_OMAP_TYPE(type, id)                          \
+static inline int is_omap ##type (void)                 \
+{                                                       \
+        return (GET_OMAP_TYPE == (id)) ? 1 : 0;         \
+}
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+#define cpu_is_omap2420()               0
+#define cpu_is_omap2422()               0
+#define cpu_is_omap2423()               0
+#define cpu_is_omap2430()               0
+#define cpu_is_omap3430()               0
+#define cpu_is_omap3630()               0
+#define soc_is_omap5430()               0
+/* These are needed for the common code */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define cpu_is_omap7xx()                0
+#define cpu_is_omap15xx()               0
+#define cpu_is_omap16xx()               0
+#define cpu_is_omap1510()               0
+#define cpu_is_omap1610()               0
+#define cpu_is_omap1611()               0
+#define cpu_is_omap1621()               0
+#define cpu_is_omap1710()               0
+#define cpu_class_is_omap1()            0
+#define cpu_class_is_omap2()            1
+#endif
+#if defined(CONFIG_ARCH_OMAP2)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()              is_omap2420()
+# define cpu_is_omap2422()              is_omap2422()
+# define cpu_is_omap2423()              is_omap2423()
+# define cpu_is_omap2430()              is_omap2430()
+#endif
+#if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap3430
+# undef cpu_is_ti81xx
+# undef cpu_is_ti816x
+# undef cpu_is_ti814x
+# undef soc_is_am35xx
+# define cpu_is_omap3430()              is_omap3430()
+# undef cpu_is_omap3630
+# define cpu_is_omap3630()              is_omap363x()
+# define cpu_is_ti81xx()                is_ti81xx()
+# define cpu_is_ti816x()                is_ti816x()
+# define cpu_is_ti814x()                is_ti814x()
+# define soc_is_am35xx()                is_am35xx()
+#endif
+# if defined(CONFIG_SOC_AM33XX)
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx()                is_am33xx()
+# define soc_is_am335x()                is_am335x()
+#endif
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# undef cpu_is_omap446x
+# undef cpu_is_omap447x
+# define cpu_is_omap44xx()              is_omap44xx()
+# define cpu_is_omap443x()              is_omap443x()
+# define cpu_is_omap446x()              is_omap446x()
+# define cpu_is_omap447x()              is_omap447x()
+# endif
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx()              is_omap54xx()
+# define soc_is_omap543x()              is_omap543x()
+#endif
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS          0x24200024
+#define OMAP2420_REV_ES1_0      OMAP242X_CLASS
+#define OMAP2420_REV_ES2_0      (OMAP242X_CLASS | (0x1 << 8))
+#define OMAP243X_CLASS          0x24300024
+#define OMAP2430_REV_ES1_0      OMAP243X_CLASS
+#define OMAP343X_CLASS          0x34300034
+#define OMAP3430_REV_ES1_0      OMAP343X_CLASS
+#define OMAP3430_REV_ES2_0      (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1      (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0      (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1      (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2    (OMAP343X_CLASS | (0x5 << 8))
+#define OMAP363X_CLASS          0x36300034
+#define OMAP3630_REV_ES1_0      OMAP363X_CLASS
+#define OMAP3630_REV_ES1_1      (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2      (OMAP363X_CLASS | (0x2 << 8))
+#define TI816X_CLASS            0x81600034
+#define TI8168_REV_ES1_0        TI816X_CLASS
+#define TI8168_REV_ES1_1        (TI816X_CLASS | (0x1 << 8))
+#define TI814X_CLASS            0x81400034
+#define TI8148_REV_ES1_0        TI814X_CLASS
+#define TI8148_REV_ES2_0        (TI814X_CLASS | (0x1 << 8))
+#define TI8148_REV_ES2_1        (TI814X_CLASS | (0x2 << 8))
+#define AM35XX_CLASS            0x35170034
+#define AM35XX_REV_ES1_0        AM35XX_CLASS
+#define AM35XX_REV_ES1_1        (AM35XX_CLASS | (0x1 << 8))
+#define AM335X_CLASS            0x33500033
+#define AM335X_REV_ES1_0        AM335X_CLASS
+#define OMAP443X_CLASS          0x44300044
+#define OMAP4430_REV_ES1_0      (OMAP443X_CLASS | (0x10 << 8))
+#define OMAP4430_REV_ES2_0      (OMAP443X_CLASS | (0x20 << 8))
+#define OMAP4430_REV_ES2_1      (OMAP443X_CLASS | (0x21 << 8))
+#define OMAP4430_REV_ES2_2      (OMAP443X_CLASS | (0x22 << 8))
+#define OMAP4430_REV_ES2_3      (OMAP443X_CLASS | (0x23 << 8))
+#define OMAP446X_CLASS          0x44600044
+#define OMAP4460_REV_ES1_0      (OMAP446X_CLASS | (0x10 << 8))
+#define OMAP4460_REV_ES1_1      (OMAP446X_CLASS | (0x11 << 8))
+#define OMAP447X_CLASS          0x44700044
+#define OMAP4470_REV_ES1_0      (OMAP447X_CLASS | (0x10 << 8))
+#define OMAP54XX_CLASS          0x54000054
+#define OMAP5430_REV_ES1_0      (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0      (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+void omap2xxx_check_revision(void);
+void omap3xxx_check_revision(void);
+void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
+void omap3xxx_check_features(void);
+void ti81xx_check_features(void);
+void omap4xxx_check_features(void);
+/*
+ * Runtime detection of OMAP3 features
+ *
+ * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
+ *    family have OS-level control over the I/O chain clock.  This is
+ *    to avoid a window during which wakeups could potentially be lost
+ *    during powerdomain transitions.  If this bit is set, it
+ *    indicates that the chip does support OS-level control of this
+ *    feature.
+ */
+extern u32 omap_features;
+#define OMAP3_HAS_L2CACHE               BIT(0)
+#define OMAP3_HAS_IVA                   BIT(1)
+#define OMAP3_HAS_SGX                   BIT(2)
+#define OMAP3_HAS_NEON                  BIT(3)
+#define OMAP3_HAS_ISP                   BIT(4)
+#define OMAP3_HAS_192MHZ_CLK            BIT(5)
+#define OMAP3_HAS_IO_WAKEUP             BIT(6)
+#define OMAP3_HAS_SDRC                  BIT(7)
+#define OMAP3_HAS_IO_CHAIN_CTRL         BIT(8)
+#define OMAP4_HAS_MPU_1GHZ              BIT(9)
+#define OMAP4_HAS_MPU_1_2GHZ            BIT(10)
+#define OMAP4_HAS_MPU_1_5GHZ            BIT(11)
+#define OMAP3_HAS_FEATURE(feat,flag)                    \
+static inline unsigned int omap3_has_ ##feat(void)      \
+{                                                       \
+        return omap_features & OMAP3_HAS_ ##flag;       \
+}                                                       \
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
+OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
+OMAP3_HAS_FEATURE(sdrc, SDRC)
+OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
+/*
+ * Runtime detection of OMAP4 features
+ */
+#define OMAP4_HAS_FEATURE(feat, flag)                   \
+static inline unsigned int omap4_has_ ##feat(void)      \
+{                                                       \
+        return omap_features & OMAP4_HAS_ ##flag;       \
+}                                                       \
+OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
+OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
+OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
+#endif  /* __ASSEMBLY__ */
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index f8217a5a4a26..b0e77a407047 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -23,8 +23,8 @@
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <plat/omap_device.h>
+#include "soc.h"
+#include "omap_device.h"
 #include "voltage.h"
 #include "control.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 44f9aa7ec0c0..45598ac819be 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -43,10 +43,10 @@
 #include <asm/sched_clock.h>
 #include <asm/arch_timer.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #include "soc.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 635e109f5ad3..1a0739d397f3 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -26,7 +26,6 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
-#include <plat/i2c.h>
 #include <plat/usb.h>
 #include "soc.h"
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 3c434498e12e..4fe67129643d 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -26,7 +26,8 @@
 #include <asm/io.h>
 #include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "soc.h"
+#include "omap_device.h"
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 51da21cb78f1..07f385a2900c 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -26,10 +26,9 @@
 #include <linux/usb/musb.h>
 #include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
-#include "am35xx.h"
+#include "soc.h"
 #include "mux.h"
 static struct musb_hdrc_config musb_config = {
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 805bea6edf17..6064425ed47b 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -18,7 +18,7 @@
 #include <linux/usb/musb.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index b2f1c67043a2..f6b6c37ac3f4 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -11,7 +11,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "wd_timer.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h
index f6bbba73b535..a78f81034a9f 100644
--- a/arch/arm/mach-omap2/wd_timer.h
+++ b/arch/arm/mach-omap2/wd_timer.h
@@ -10,7 +10,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
 #define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
 extern int omap2_wd_timer_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index dacaee009a4e..4bd0ace20e98 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,13 +3,12 @@
 #
 # Common support
-obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
+obj-y := common.o sram.o dma.o fb.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=
 # omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
deleted file mode 100644
index 9d7ac20ef8f9..000000000000
--- a/arch/arm/plat-omap/clock.c
+++ /dev/null
@@ -1,544 +0,0 @@
-/*
- *  linux/arch/arm/plat-omap/clock.c
- *
- *  Copyright (C) 2004 - 2008 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-#include <plat/clock.h>
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
-static struct clk_functions *arch_clock;
-/*
- * Standard clock functions defined in include/linux/clk.h
- */
-int clk_enable(struct clk *clk)
-{
-        unsigned long flags;
-        int ret;
-        if (clk == NULL || IS_ERR(clk))
-                return -EINVAL;
-        if (!arch_clock || !arch_clock->clk_enable)
-                return -EINVAL;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        ret = arch_clock->clk_enable(clk);
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-void clk_disable(struct clk *clk)
-{
-        unsigned long flags;
-        if (clk == NULL || IS_ERR(clk))
-                return;
-        if (!arch_clock || !arch_clock->clk_disable)
-                return;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        if (clk->usecount == 0) {
-                pr_err("Trying disable clock %s with 0 usecount\n",
-                       clk->name);
-                WARN_ON(1);
-                goto out;
-        }
-        arch_clock->clk_disable(clk);
-out:
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-unsigned long clk_get_rate(struct clk *clk)
-{
-        unsigned long flags;
-        unsigned long ret;
-        if (clk == NULL || IS_ERR(clk))
-                return 0;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        ret = clk->rate;
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-/*
- * Optional clock functions defined in include/linux/clk.h
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-        unsigned long flags;
-        long ret;
-        if (clk == NULL || IS_ERR(clk))
-                return 0;
-        if (!arch_clock || !arch_clock->clk_round_rate)
-                return 0;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        ret = arch_clock->clk_round_rate(clk, rate);
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-        unsigned long flags;
-        int ret = -EINVAL;
-        if (clk == NULL || IS_ERR(clk))
-                return ret;
-        if (!arch_clock || !arch_clock->clk_set_rate)
-                return ret;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        ret = arch_clock->clk_set_rate(clk, rate);
-        if (ret == 0)
-                propagate_rate(clk);
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-        unsigned long flags;
-        int ret = -EINVAL;
-        if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
-                return ret;
-        if (!arch_clock || !arch_clock->clk_set_parent)
-                return ret;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        if (clk->usecount == 0) {
-                ret = arch_clock->clk_set_parent(clk, parent);
-                if (ret == 0)
-                        propagate_rate(clk);
-        } else
-                ret = -EBUSY;
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-struct clk *clk_get_parent(struct clk *clk)
-{
-        return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-/*
- * OMAP specific clock functions shared between omap1 and omap2
- */
-int __initdata mpurate;
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
-        get_option(&str, &mpurate);
-        if (!mpurate)
-                return 1;
-        if (mpurate < 1000)
-                mpurate *= 1000000;
-        return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
-        return clk->parent->rate;
-}
-/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap_fixed_divisor_recalc(struct clk *clk)
-{
-        WARN_ON(!clk->fixed_div);
-        return clk->parent->rate / clk->fixed_div;
-}
-void clk_reparent(struct clk *child, struct clk *parent)
-{
-        list_del_init(&child->sibling);
-        if (parent)
-                list_add(&child->sibling, &parent->children);
-        child->parent = parent;
-        /* now do the debugfs renaming to reattach the child
-           to the proper parent */
-}
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
-        struct clk *clkp;
-        list_for_each_entry(clkp, &tclk->children, sibling) {
-                if (clkp->recalc)
-                        clkp->rate = clkp->recalc(clkp);
-                propagate_rate(clkp);
-        }
-}
-static LIST_HEAD(root_clks);
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
-        struct clk *clkp;
-        list_for_each_entry(clkp, &root_clks, sibling) {
-                if (clkp->recalc)
-                        clkp->rate = clkp->recalc(clkp);
-                propagate_rate(clkp);
-        }
-}
-/**
- * clk_preinit - initialize any fields in the struct clk before clk init
- * @clk: struct clk * to initialize
- *
- * Initialize any struct clk fields needed before normal clk initialization
- * can run.  No return value.
- */
-void clk_preinit(struct clk *clk)
-{
-        INIT_LIST_HEAD(&clk->children);
-}
-int clk_register(struct clk *clk)
-{
-        if (clk == NULL || IS_ERR(clk))
-                return -EINVAL;
-        /*
-         * trap out already registered clocks
-         */
-        if (clk->node.next || clk->node.prev)
-                return 0;
-        mutex_lock(&clocks_mutex);
-        if (clk->parent)
-                list_add(&clk->sibling, &clk->parent->children);
-        else
-                list_add(&clk->sibling, &root_clks);
-        list_add(&clk->node, &clocks);
-        if (clk->init)
-                clk->init(clk);
-        mutex_unlock(&clocks_mutex);
-        return 0;
-}
-EXPORT_SYMBOL(clk_register);
-void clk_unregister(struct clk *clk)
-{
-        if (clk == NULL || IS_ERR(clk))
-                return;
-        mutex_lock(&clocks_mutex);
-        list_del(&clk->sibling);
-        list_del(&clk->node);
-        mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-void clk_enable_init_clocks(void)
-{
-        struct clk *clkp;
-        list_for_each_entry(clkp, &clocks, node) {
-                if (clkp->flags & ENABLE_ON_INIT)
-                        clk_enable(clkp);
-        }
-}
-int omap_clk_enable_autoidle_all(void)
-{
-        struct clk *c;
-        unsigned long flags;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        list_for_each_entry(c, &clocks, node)
-                if (c->ops->allow_idle)
-                        c->ops->allow_idle(c);
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return 0;
-}
-int omap_clk_disable_autoidle_all(void)
-{
-        struct clk *c;
-        unsigned long flags;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        list_for_each_entry(c, &clocks, node)
-                if (c->ops->deny_idle)
-                        c->ops->deny_idle(c);
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return 0;
-}
-/*
- * Low level helpers
- */
-static int clkll_enable_null(struct clk *clk)
-{
-        return 0;
-}
-static void clkll_disable_null(struct clk *clk)
-{
-}
-const struct clkops clkops_null = {
-        .enable         = clkll_enable_null,
-        .disable        = clkll_disable_null,
-};
-/*
- * Dummy clock
- *
- * Used for clock aliases that are needed on some OMAPs, but not others
- */
-struct clk dummy_ck = {
-        .name   = "dummy",
-        .ops    = &clkops_null,
-};
-/*
- *
- */
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-static int __init clk_disable_unused(void)
-{
-        struct clk *ck;
-        unsigned long flags;
-        if (!arch_clock || !arch_clock->clk_disable_unused)
-                return 0;
-        pr_info("clock: disabling unused clocks to save power\n");
-        spin_lock_irqsave(&clockfw_lock, flags);
-        list_for_each_entry(ck, &clocks, node) {
-                if (ck->ops == &clkops_null)
-                        continue;
-                if (ck->usecount > 0 || !ck->enable_reg)
-                        continue;
-                arch_clock->clk_disable_unused(ck);
-        }
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return 0;
-}
-late_initcall(clk_disable_unused);
-late_initcall(omap_clk_enable_autoidle_all);
-#endif
-int __init clk_init(struct clk_functions * custom_clocks)
-{
-        if (!custom_clocks) {
-                pr_err("No custom clock functions registered\n");
-                BUG();
-        }
-        arch_clock = custom_clocks;
-        return 0;
-}
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/*
- *      debugfs support to trace clock tree hierarchy and attributes
- */
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-static struct dentry *clk_debugfs_root;
-static int clk_dbg_show_summary(struct seq_file *s, void *unused)
-{
-        struct clk *c;
-        struct clk *pa;
-        mutex_lock(&clocks_mutex);
-        seq_printf(s, "%-30s %-30s %-10s %s\n",
-                "clock-name", "parent-name", "rate", "use-count");
-        list_for_each_entry(c, &clocks, node) {
-                pa = c->parent;
-                seq_printf(s, "%-30s %-30s %-10lu %d\n",
-                        c->name, pa ? pa->name : "none", c->rate, c->usecount);
-        }
-        mutex_unlock(&clocks_mutex);
-        return 0;
-}
-static int clk_dbg_open(struct inode *inode, struct file *file)
-{
-        return single_open(file, clk_dbg_show_summary, inode->i_private);
-}
-static const struct file_operations debug_clock_fops = {
-        .open           = clk_dbg_open,
-        .read           = seq_read,
-        .llseek         = seq_lseek,
-        .release        = single_release,
-};
-static int clk_debugfs_register_one(struct clk *c)
-{
-        int err;
-        struct dentry *d;
-        struct clk *pa = c->parent;
-        d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
-        if (!d)
-                return -ENOMEM;
-        c->dent = d;
-        d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
-        if (!d) {
-                err = -ENOMEM;
-                goto err_out;
-        }
-        d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-        if (!d) {
-                err = -ENOMEM;
-                goto err_out;
-        }
-        d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-        if (!d) {
-                err = -ENOMEM;
-                goto err_out;
-        }
-        return 0;
-err_out:
-        debugfs_remove_recursive(c->dent);
-        return err;
-}
-static int clk_debugfs_register(struct clk *c)
-{
-        int err;
-        struct clk *pa = c->parent;
-        if (pa && !pa->dent) {
-                err = clk_debugfs_register(pa);
-                if (err)
-                        return err;
-        }
-        if (!c->dent) {
-                err = clk_debugfs_register_one(c);
-                if (err)
-                        return err;
-        }
-        return 0;
-}
-static int __init clk_debugfs_init(void)
-{
-        struct clk *c;
-        struct dentry *d;
-        int err;
-        d = debugfs_create_dir("clock", NULL);
-        if (!d)
-                return -ENOMEM;
-        clk_debugfs_root = d;
-        list_for_each_entry(c, &clocks, node) {
-                err = clk_debugfs_register(c);
-                if (err)
-                        goto err_out;
-        }
-        d = debugfs_create_file("summary", S_IRUGO,
-                d, NULL, &debug_clock_fops);
-        if (!d)
-                return -ENOMEM;
-        return 0;
-err_out:
-        debugfs_remove_recursive(clk_debugfs_root);
-        return err;
-}
-late_initcall(clk_debugfs_init);
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 111315a69354..a1555e028123 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -16,20 +16,8 @@
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
-#include <plat/common.h>
+#include "common.h"
-#include <plat/vram.h>
+#include <plat-omap/dma-omap.h>
-#include <linux/platform_data/dsp-omap.h>
-#include <plat/dma.h>
-#include <plat/omap-secure.h>
-void __init omap_reserve(void)
-{
-        omap_vram_reserve_sdram_memblock();
-        omap_dsp_reserve_sdram_memblock();
-        omap_secure_ram_reserve_memblock();
-        omap_barrier_reserve_memblock();
-}
 void __init omap_init_consistent_dma_size(void)
 {
@@ -37,12 +25,3 @@ void __init omap_init_consistent_dma_size(void)
        init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
 #endif
 }
-/*
- * Stub function for OMAP2 so that common files
- * continue to build when custom builds are used
- */
-int __weak omap_secure_ram_reserve_memblock(void)
-{
-        return 0;
-}
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/common.h
index d1cb6f527b7e..8ae0542a37d9 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/common.h
@@ -1,7 +1,5 @@
 /*
- * arch/arm/plat-omap/include/mach/common.h
+ * Header for shared OMAP code in plat-omap.
- *
- * Header for code common to all OMAP machines.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
@@ -27,16 +25,12 @@
 #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
 #define __ARCH_ARM_MACH_OMAP_COMMON_H
-#include <plat/i2c.h>
-#include <plat/omap_hwmod.h>
 extern int __init omap_init_clocksource_32k(void __iomem *vbase);
 extern void __init omap_check_revision(void);
 extern void omap_reserve(void);
+struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
-void omap_sram_init(void);
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 87ba8dd0d791..66bf3f9324fe 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -22,8 +22,7 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
-#include <plat/common.h>
+#include "common.h"
-#include <plat/clock.h>
 /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
 #define OMAP2_32KSYNCNT_REV_OFF         0x0
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index ea29bbe8e5cf..feca128bc8ed 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -20,7 +20,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <plat/fpga.h>
+#include "fpga.h"
 /* Many OMAP development platforms reuse the same "debug board"; these
 * platforms include H2, H3, H4, and Perseus2.  There are 16 LEDs on the
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index c76ed8bff838..49803cc18787 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -36,9 +36,10 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <plat/cpu.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include "../mach-omap1/soc.h"
+#include "../mach-omap2/soc.h"
 /*
 * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
@@ -175,6 +176,7 @@ static inline void set_gdma_dev(int req, int dev)
 #define omap_writel(val, reg)   do {} while (0)
 #endif
+#ifdef CONFIG_ARCH_OMAP1
 void omap_set_dma_priority(int lch, int dst_port, int priority)
 {
        unsigned long reg;
@@ -203,18 +205,22 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
                l |= (priority & 0xf) << 8;
                omap_writel(l, reg);
        }
+}
+#endif
-        if (cpu_class_is_omap2()) {
+#ifdef CONFIG_ARCH_OMAP2PLUS
-                u32 ccr;
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+        u32 ccr;
-                ccr = p->dma_read(CCR, lch);
+        ccr = p->dma_read(CCR, lch);
-                if (priority)
+        if (priority)
-                        ccr |= (1 << 6);
+                ccr |= (1 << 6);
-                else
+        else
-                        ccr &= ~(1 << 6);
+                ccr &= ~(1 << 6);
-                p->dma_write(ccr, CCR, lch);
+        p->dma_write(ccr, CCR, lch);
-        }
 }
+#endif
 EXPORT_SYMBOL(omap_set_dma_priority);
 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 938b50a33439..4a0b30a4ebda 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -42,10 +42,11 @@
 #include <linux/pm_runtime.h>
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
 #include <mach/hardware.h>
+#include "../mach-omap2/omap-pm.h"
 static u32 omap_reserved_systimers;
 static LIST_HEAD(omap_timer_list);
 static DEFINE_SPINLOCK(dm_timer_lock);
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index bcbb9d5dc293..f868caeedfd6 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -33,6 +33,67 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
+#include <plat/cpu.h>
+#ifdef CONFIG_OMAP2_VRFB
+/*
+ * The first memory resource is the register region for VRFB,
+ * the rest are VRFB virtual memory areas for each VRFB context.
+ */
+static const struct resource omap2_vrfb_resources[] = {
+        DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"),
+        DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+        DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+        DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+        DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+};
+static const struct resource omap3_vrfb_resources[] = {
+        DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"),
+        DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+        DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+        DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+        DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+        DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"),
+        DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"),
+        DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"),
+        DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"),
+        DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"),
+        DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"),
+        DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"),
+        DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"),
+};
+static int __init omap_init_vrfb(void)
+{
+        struct platform_device *pdev;
+        const struct resource *res;
+        unsigned int num_res;
+        if (cpu_is_omap24xx()) {
+                res = omap2_vrfb_resources;
+                num_res = ARRAY_SIZE(omap2_vrfb_resources);
+        } else if (cpu_is_omap34xx()) {
+                res = omap3_vrfb_resources;
+                num_res = ARRAY_SIZE(omap3_vrfb_resources);
+        } else {
+                return 0;
+        }
+        pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
+                        res, num_res, NULL, 0);
+        if (IS_ERR(pdev))
+                return PTR_ERR(pdev);
+        else
+                return 0;
+}
+arch_initcall(omap_init_vrfb);
+#endif
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 static bool omapfb_lcd_configured;
diff --git a/arch/arm/plat-omap/fpga.h b/arch/arm/plat-omap/fpga.h
new file mode 100644
index 000000000000..54faaa93e6f4
--- /dev/null
+++ b/arch/arm/plat-omap/fpga.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+/*
+ * ---------------------------------------------------------------------------
+ *  H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE              0xE8000000              /* VA */
+#define H2P2_DBG_FPGA_SIZE              SZ_4K                   /* SIZE */
+#define H2P2_DBG_FPGA_START             0x04000000              /* PA */
+#define H2P2_DBG_FPGA_ETHR_START        (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV          IOMEM(H2P2_DBG_FPGA_BASE + 0x10)        /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV         IOMEM(H2P2_DBG_FPGA_BASE + 0x12)        /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO              IOMEM(H2P2_DBG_FPGA_BASE + 0x14)        /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS              IOMEM(H2P2_DBG_FPGA_BASE + 0x16)        /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS       IOMEM(H2P2_DBG_FPGA_BASE + 0x18)        /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS        IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)        /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET         IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)        /* LAN Reset line */
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+        /* offset 0x00 */
+        u16             smc91x[8];
+        /* offset 0x10 */
+        u16             fpga_rev;
+        u16             board_rev;
+        u16             gpio_outputs;
+        u16             leds;
+        /* offset 0x18 */
+        u16             misc_inputs;
+        u16             lan_status;
+        u16             lan_reset;
+        u16             reserved0;
+        /* offset 0x20 */
+        u16             ps2_data;
+        u16             ps2_ctrl;
+        /* plus also 4 rs232 ports ... */
+};
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN         (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER         (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED           (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE          (1 << 12)
+/*  cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER        (1 << 0)        // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE   11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK   ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+#define H2P2_DBG_FPGA_P2_LED_TIMER              (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE               (1 << 1)
+#endif
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a5683a84c6ee..be6deb7c12ec 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,52 +26,20 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <mach/irqs.h>
-#include <plat/i2c.h>
-#include <plat/omap_device.h>
-#define OMAP_I2C_SIZE           0x3f
+#include "../mach-omap1/soc.h"
-#define OMAP1_I2C_BASE          0xfffb3800
+#include "../mach-omap2/soc.h"
-#define OMAP1_INT_I2C           (32 + 4)
-static const char name[] = "omap_i2c";
+#include "i2c.h"
-#define I2C_RESOURCE_BUILDER(base, irq)                 \
-        {                                               \
-                .start  = (base),                       \
-                .end    = (base) + OMAP_I2C_SIZE,       \
-                .flags  = IORESOURCE_MEM,               \
-        },                                              \
-        {                                               \
-                .start  = (irq),                        \
-                .flags  = IORESOURCE_IRQ,               \
-        },
-static struct resource i2c_resources[][2] = {
-        { I2C_RESOURCE_BUILDER(0, 0) },
-};
-#define I2C_DEV_BUILDER(bus_id, res, data)              \
-        {                                               \
-                .id     = (bus_id),                     \
-                .name   = name,                         \
-                .num_resources  = ARRAY_SIZE(res),      \
-                .resource       = (res),                \
-                .dev            = {                     \
-                        .platform_data  = (data),       \
-                },                                      \
-        }
-#define MAX_OMAP_I2C_HWMOD_NAME_LEN     16
 #define OMAP_I2C_MAX_CONTROLLERS 4
 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
-static struct platform_device omap_i2c_devices[] = {
-        I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-};
 #define OMAP_I2C_CMDLINE_SETUP  (BIT(31))
@@ -91,95 +59,6 @@ static int __init omap_i2c_nr_ports(void)
        return ports;
 }
-static inline int omap1_i2c_add_bus(int bus_id)
-{
-        struct platform_device *pdev;
-        struct omap_i2c_bus_platform_data *pdata;
-        struct resource *res;
-        omap1_i2c_mux_pins(bus_id);
-        pdev = &omap_i2c_devices[bus_id - 1];
-        res = pdev->resource;
-        res[0].start = OMAP1_I2C_BASE;
-        res[0].end = res[0].start + OMAP_I2C_SIZE;
-        res[1].start = OMAP1_INT_I2C;
-        pdata = &i2c_pdata[bus_id - 1];
-        /* all OMAP1 have IP version 1 register set */
-        pdata->rev = OMAP_I2C_IP_VERSION_1;
-        /* all OMAP1 I2C are implemented like this */
-        pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
-                       OMAP_I2C_FLAG_SIMPLE_CLOCK |
-                       OMAP_I2C_FLAG_16BIT_DATA_REG |
-                       OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
-        /* how the cpu bus is wired up differs for 7xx only */
-        if (cpu_is_omap7xx())
-                pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
-        else
-                pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
-        return platform_device_register(pdev);
-}
-#ifdef CONFIG_ARCH_OMAP2PLUS
-static inline int omap2_i2c_add_bus(int bus_id)
-{
-        int l;
-        struct omap_hwmod *oh;
-        struct platform_device *pdev;
-        char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
-        struct omap_i2c_bus_platform_data *pdata;
-        struct omap_i2c_dev_attr *dev_attr;
-        omap2_i2c_mux_pins(bus_id);
-        l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
-        WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
-                "String buffer overflow in I2C%d device setup\n", bus_id);
-        oh = omap_hwmod_lookup(oh_name);
-        if (!oh) {
-                        pr_err("Could not look up %s\n", oh_name);
-                        return -EEXIST;
-        }
-        pdata = &i2c_pdata[bus_id - 1];
-        /*
-         * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
-         * use, and functionality implementation flags, up to the OMAP I2C
-         * driver via platform data
-         */
-        pdata->rev = oh->class->rev;
-        dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
-        pdata->flags = dev_attr->flags;
-        pdev = omap_device_build(name, bus_id, oh, pdata,
-                        sizeof(struct omap_i2c_bus_platform_data),
-                        NULL, 0, 0);
-        WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
-        return PTR_RET(pdev);
-}
-#else
-static inline int omap2_i2c_add_bus(int bus_id)
-{
-        return 0;
-}
-#endif
-static int __init omap_i2c_add_bus(int bus_id)
-{
-        if (cpu_class_is_omap1())
-                return omap1_i2c_add_bus(bus_id);
-        else
-                return omap2_i2c_add_bus(bus_id);
-}
 /**
 * omap_i2c_bus_setup - Process command line options for the I2C bus speed
 * @str: String of options
@@ -218,7 +97,7 @@ static int __init omap_register_i2c_bus_cmdline(void)
        for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
                if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
                        i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
-                        err = omap_i2c_add_bus(i + 1);
+                        err = omap_i2c_add_bus(&i2c_pdata[i], i + 1);
                        if (err)
                                goto out;
                }
@@ -256,5 +135,5 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
        i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
-        return omap_i2c_add_bus(bus_id);
+        return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id);
 }
diff --git a/arch/arm/plat-omap/i2c.h b/arch/arm/plat-omap/i2c.h
new file mode 100644
index 000000000000..7a9028cb5a75
--- /dev/null
+++ b/arch/arm/plat-omap/i2c.h
@@ -0,0 +1,47 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#ifndef __PLAT_OMAP_I2C_H
+#define __PLAT_OMAP_I2C_H
+struct i2c_board_info;
+struct omap_i2c_bus_platform_data;
+int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+                        int bus_id);
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+                                 struct i2c_board_info const *info,
+                                 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+                                 struct i2c_board_info const *info,
+                                 unsigned len)
+{
+        return 0;
+}
+#endif
+struct omap_hwmod;
+int omap_i2c_reset(struct omap_hwmod *oh);
+#endif /* __PLAT_OMAP_I2C_H */
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h
index 0a87b052f8f7..222be7e934e5 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h
@@ -1,5 +1,5 @@
 /*
- *  arch/arm/plat-omap/include/mach/dma.h
+ *  OMAP DMA handling defines and function
 *
 *  Copyright (C) 2003 Nokia Corporation
 *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
@@ -23,187 +23,8 @@
 #include <linux/platform_device.h>
-/*
- * TODO: These dma channel defines should go away once all
- * the omap drivers hwmod adapted.
- */
-/* Move omap4 specific defines to dma-44xx.h */
-#include "dma-44xx.h"
 #define INT_DMA_LCD                     25
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE              0
-#define OMAP_DMA_MCSI1_TX               1
-#define OMAP_DMA_MCSI1_RX               2
-#define OMAP_DMA_I2C_RX                 3
-#define OMAP_DMA_I2C_TX                 4
-#define OMAP_DMA_EXT_NDMA_REQ           5
-#define OMAP_DMA_EXT_NDMA_REQ2          6
-#define OMAP_DMA_UWIRE_TX               7
-#define OMAP_DMA_MCBSP1_TX              8
-#define OMAP_DMA_MCBSP1_RX              9
-#define OMAP_DMA_MCBSP3_TX              10
-#define OMAP_DMA_MCBSP3_RX              11
-#define OMAP_DMA_UART1_TX               12
-#define OMAP_DMA_UART1_RX               13
-#define OMAP_DMA_UART2_TX               14
-#define OMAP_DMA_UART2_RX               15
-#define OMAP_DMA_MCBSP2_TX              16
-#define OMAP_DMA_MCBSP2_RX              17
-#define OMAP_DMA_UART3_TX               18
-#define OMAP_DMA_UART3_RX               19
-#define OMAP_DMA_CAMERA_IF_RX           20
-#define OMAP_DMA_MMC_TX                 21
-#define OMAP_DMA_MMC_RX                 22
-#define OMAP_DMA_NAND                   23
-#define OMAP_DMA_IRQ_LCD_LINE           24
-#define OMAP_DMA_MEMORY_STICK           25
-#define OMAP_DMA_USB_W2FC_RX0           26
-#define OMAP_DMA_USB_W2FC_RX1           27
-#define OMAP_DMA_USB_W2FC_RX2           28
-#define OMAP_DMA_USB_W2FC_TX0           29
-#define OMAP_DMA_USB_W2FC_TX1           30
-#define OMAP_DMA_USB_W2FC_TX2           31
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN          32
-#define OMAP_DMA_SPI_TX                 33
-#define OMAP_DMA_SPI_RX                 34
-#define OMAP_DMA_CRYPTO_HASH            35
-#define OMAP_DMA_CCP_ATTN               36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY     37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0      38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0      39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1      40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1      41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2      42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2      43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3      44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3      45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4      46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4      47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5      48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5      49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6      50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6      51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7      52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7      53
-#define OMAP_DMA_MMC2_TX                54
-#define OMAP_DMA_MMC2_RX                55
-#define OMAP_DMA_CRYPTO_DES_OUT         56
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE          0
-#define OMAP24XX_DMA_XTI_DMA            1       /* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0        2       /* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1        3       /* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC               4       /* S_DMA_3 */
-#define OMAP24XX_DMA_GFX                5       /* S_DMA_4 */
-#define OMAP24XX_DMA_DSS                6       /* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX           7       /* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2        7       /* S_DMA_6 */
-#define OMAP24XX_DMA_CWT                8       /* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX             9       /* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX             10      /* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX             11      /* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX             12      /* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX         13      /* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX         13      /* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2        14      /* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3        15      /* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4        16      /* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD          17      /* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR          18      /* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD       19      /* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR       20      /* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD       21      /* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR       22      /* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD       23      /* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR       24      /* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD       25      /* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR       26      /* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3        14      /* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0           15      /* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0           16      /* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX          17      /* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX          18      /* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX          19      /* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX          20      /* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX          21      /* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX          22      /* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1           23      /* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1           24      /* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4        25      /* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5        26      /* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX            25      /* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX            26      /* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX            27      /* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX            28      /* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX            29      /* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX            30      /* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX          31      /* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX          32      /* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX          33      /* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX          34      /* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0           35      /* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0           36      /* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1           37      /* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1           38      /* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2           39      /* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2           40      /* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3           41      /* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3           42      /* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0           43      /* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0           44      /* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1           45      /* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1           46      /* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX            47      /* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX            48      /* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX           49      /* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX           50      /* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX           51      /* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX           52      /* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX           53      /* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX           54      /* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0       55      /* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0       56      /* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1       57      /* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1       58      /* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2       59      /* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2       60      /* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX            61      /* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX            62      /* S_DMA_61 */
-#define OMAP24XX_DMA_MS                 63      /* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5        64      /* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6        64      /* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3        64      /* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX            65      /* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX            66      /* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX            67      /* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX            68      /* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX         69      /* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0           70      /* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0           71      /* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0               72      /* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1               73      /* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2               74      /* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3               75      /* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX            77      /* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX            78      /* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX            79      /* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX            80      /* S_DMA_79 */
-#define OMAP36XX_DMA_UART4_TX           81      /* S_DMA_80 */
-#define OMAP36XX_DMA_UART4_RX           82      /* S_DMA_81 */
-/* Only for AM35xx */
-#define AM35XX_DMA_UART4_TX             54
-#define AM35XX_DMA_UART4_RX             55
-/*----------------------------------------------------------------------------*/
 #define OMAP1_DMA_TOUT_IRQ              (1 << 0)
 #define OMAP_DMA_DROP_IRQ               (1 << 1)
 #define OMAP_DMA_HALF_IRQ               (1 << 2)
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
deleted file mode 100644
index 025d85a3ee86..000000000000
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * clkdev <-> OMAP integration
- *
- * Russell King <linux@arm.linux.org.uk>
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-#include <linux/clkdev.h>
-struct omap_clk {
-        u16                             cpu;
-        struct clk_lookup               lk;
-};
-#define CLK(dev, con, ck, cp)           \
-        {                               \
-                 .cpu = cp,             \
-                .lk = {                 \
-                        .dev_id = dev,  \
-                        .con_id = con,  \
-                        .clk = ck,      \
-                },                      \
-        }
-/* Platform flags for the clkdev-OMAP integration code */
-#define CK_310          (1 << 0)
-#define CK_7XX          (1 << 1)        /* 7xx, 850 */
-#define CK_1510         (1 << 2)
-#define CK_16XX         (1 << 3)        /* 16xx, 17xx, 5912 */
-#define CK_242X         (1 << 4)
-#define CK_243X         (1 << 5)        /* 243x, 253x */
-#define CK_3430ES1      (1 << 6)        /* 34xxES1 only */
-#define CK_3430ES2PLUS  (1 << 7)        /* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_AM35XX       (1 << 9)        /* Sitara AM35xx */
-#define CK_36XX         (1 << 10)       /* 36xx/37xx-specific clocks */
-#define CK_443X         (1 << 11)
-#define CK_TI816X       (1 << 12)
-#define CK_446X         (1 << 13)
-#define CK_AM33XX       (1 << 14)       /* AM33xx specific clocks */
-#define CK_1710         (1 << 15)       /* 1710 extra for rate selection */
-#define CK_34XX         (CK_3430ES1 | CK_3430ES2PLUS)
-#define CK_3XXX         (CK_34XX | CK_AM35XX | CK_36XX)
-#endif
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
deleted file mode 100644
index e2e2d045e428..000000000000
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * OMAP clock: data structure definitions, function prototypes, shared macros
- *
- * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-#include <linux/list.h>
-struct module;
-struct clk;
-struct clockdomain;
-/* Temporary, needed during the common clock framework conversion */
-#define __clk_get_name(clk)     (clk->name)
-#define __clk_get_parent(clk)   (clk->parent)
-#define __clk_get_rate(clk)     (clk->rate)
-/**
- * struct clkops - some clock function pointers
- * @enable: fn ptr that enables the current clock in hardware
- * @disable: fn ptr that enables the current clock in hardware
- * @find_idlest: function returning the IDLEST register for the clock's IP blk
- * @find_companion: function returning the "companion" clk reg for the clock
- * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
- * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
- *
- * A "companion" clk is an accompanying clock to the one being queried
- * that must be enabled for the IP module connected to the clock to
- * become accessible by the hardware.  Neither @find_idlest nor
- * @find_companion should be needed; that information is IP
- * block-specific; the hwmod code has been created to handle this, but
- * until hwmod data is ready and drivers have been converted to use PM
- * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
- * @find_companion must, unfortunately, remain.
- */
-struct clkops {
-        int                     (*enable)(struct clk *);
-        void                    (*disable)(struct clk *);
-        void                    (*find_idlest)(struct clk *, void __iomem **,
-                                               u8 *, u8 *);
-        void                    (*find_companion)(struct clk *, void __iomem **,
-                                                  u8 *);
-        void                    (*allow_idle)(struct clk *);
-        void                    (*deny_idle)(struct clk *);
-};
-#ifdef CONFIG_ARCH_OMAP2PLUS
-/* struct clksel_rate.flags possibilities */
-#define RATE_IN_242X            (1 << 0)
-#define RATE_IN_243X            (1 << 1)
-#define RATE_IN_3430ES1         (1 << 2)        /* 3430ES1 rates only */
-#define RATE_IN_3430ES2PLUS     (1 << 3)        /* 3430 ES >= 2 rates only */
-#define RATE_IN_36XX            (1 << 4)
-#define RATE_IN_4430            (1 << 5)
-#define RATE_IN_TI816X          (1 << 6)
-#define RATE_IN_4460            (1 << 7)
-#define RATE_IN_AM33XX          (1 << 8)
-#define RATE_IN_TI814X          (1 << 9)
-#define RATE_IN_24XX            (RATE_IN_242X | RATE_IN_243X)
-#define RATE_IN_34XX            (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
-#define RATE_IN_3XXX            (RATE_IN_34XX | RATE_IN_36XX)
-#define RATE_IN_44XX            (RATE_IN_4430 | RATE_IN_4460)
-/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
-#define RATE_IN_3430ES2PLUS_36XX        (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
-        u32                     val;
-        u8                      div;
-        u16                     flags;
-};
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
-        struct clk               *parent;
-        const struct clksel_rate *rates;
-};
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
-        void __iomem            *mult_div1_reg;
-        u32                     mult_mask;
-        u32                     div1_mask;
-        struct clk              *clk_bypass;
-        struct clk              *clk_ref;
-        void __iomem            *control_reg;
-        u32                     enable_mask;
-        unsigned long           last_rounded_rate;
-        u16                     last_rounded_m;
-        u16                     max_multiplier;
-        u8                      last_rounded_n;
-        u8                      min_divider;
-        u16                     max_divider;
-        u8                      modes;
-        void __iomem            *autoidle_reg;
-        void __iomem            *idlest_reg;
-        u32                     autoidle_mask;
-        u32                     freqsel_mask;
-        u32                     idlest_mask;
-        u32                     dco_mask;
-        u32                     sddiv_mask;
-        u8                      auto_recal_bit;
-        u8                      recal_en_bit;
-        u8                      recal_st_bit;
-        u8                      flags;
-};
-#endif
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- *     bits share the same register.  This flag allows the
- *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
- *     should be used.  This is a temporary solution - a better approach
- *     would be to associate clock type-specific data with the clock,
- *     similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT        (1 << 0)        /* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL      (1 << 1)
-#define CLOCK_NO_IDLE_PARENT    (1 << 2)
-#define ENABLE_ON_INIT          (1 << 3)        /* Enable upon framework init */
-#define INVERT_ENABLE           (1 << 4)        /* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2          (1 << 5)
-/**
- * struct clk - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @ops: struct clkops * for this clock
- * @name: the name of the clock in the hardware (used in hwmod data and debug)
- * @parent: pointer to this clock's parent struct clk
- * @children: list_head connecting to the child clks' @sibling list_heads
- * @sibling: list_head connecting this clk to its parent clk's @children
- * @rate: current clock rate
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @recalc: fn ptr that returns the clock's current rate
- * @set_rate: fn ptr that can change the clock's current rate
- * @round_rate: fn ptr that can round the clock's current rate
- * @init: fn ptr to do clock-specific initialization
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @usecount: number of users that have requested this clock to be enabled
- * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- * XXX @usecount is poorly named.  It should be "enable_count" or
- * something similar.  "users" in the description refers to kernel
- * code (core code or drivers) that have called clk_enable() and not
- * yet called clk_disable(); the usecount of parent clocks is also
- * incremented by the clock code when clk_enable() is called on child
- * clocks and decremented by the clock code when clk_disable() is
- * called on child clocks.
- *
- * XXX @clkdm, @usecount, @children, @sibling should be marked for
- * internal use only.
- *
- * @children and @sibling are used to optimize parent-to-child clock
- * tree traversals.  (child-to-parent traversals use @parent.)
- *
- * XXX The notion of the clock's current rate probably needs to be
- * separated from the clock's target rate.
- */
-struct clk {
-        struct list_head        node;
-        const struct clkops     *ops;
-        const char              *name;
-        struct clk              *parent;
-        struct list_head        children;
-        struct list_head        sibling;        /* node for children */
-        unsigned long           rate;
-        void __iomem            *enable_reg;
-        unsigned long           (*recalc)(struct clk *);
-        int                     (*set_rate)(struct clk *, unsigned long);
-        long                    (*round_rate)(struct clk *, unsigned long);
-        void                    (*init)(struct clk *);
-        u8                      enable_bit;
-        s8                      usecount;
-        u8                      fixed_div;
-        u8                      flags;
-#ifdef CONFIG_ARCH_OMAP2PLUS
-        void __iomem            *clksel_reg;
-        u32                     clksel_mask;
-        const struct clksel     *clksel;
-        struct dpll_data        *dpll_data;
-        const char              *clkdm_name;
-        struct clockdomain      *clkdm;
-#else
-        u8                      rate_offset;
-        u8                      src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-        struct dentry           *dent;  /* For visible tree hierarchy */
-#endif
-};
-struct clk_functions {
-        int             (*clk_enable)(struct clk *clk);
-        void            (*clk_disable)(struct clk *clk);
-        long            (*clk_round_rate)(struct clk *clk, unsigned long rate);
-        int             (*clk_set_rate)(struct clk *clk, unsigned long rate);
-        int             (*clk_set_parent)(struct clk *clk, struct clk *parent);
-        void            (*clk_allow_idle)(struct clk *clk);
-        void            (*clk_deny_idle)(struct clk *clk);
-        void            (*clk_disable_unused)(struct clk *clk);
-};
-extern int mpurate;
-extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_preinit(struct clk *clk);
-extern int clk_register(struct clk *clk);
-extern void clk_reparent(struct clk *child, struct clk *parent);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern unsigned long followparent_recalc(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-extern struct clk *omap_clk_get_by_name(const char *name);
-extern int omap_clk_enable_autoidle_all(void);
-extern int omap_clk_disable_autoidle_all(void);
-extern const struct clkops clkops_null;
-extern struct clk dummy_ck;
-#endif
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 67da857783ce..ba542ec8d513 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/cpu.h
- *
 * OMAP cpu type detection
 *
 * Copyright (C) 2004, 2008 Nokia Corporation
@@ -30,470 +28,12 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
-#ifndef __ASSEMBLY__
+#ifdef CONFIG_ARCH_OMAP1
+#include "../../mach-omap1/soc.h"
-#include <linux/bitops.h>
-#include <plat/multi.h>
-/*
- * Omap device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST          0
-#define OMAP2_DEVICE_TYPE_EMU           1
-#define OMAP2_DEVICE_TYPE_SEC           2
-#define OMAP2_DEVICE_TYPE_GP            3
-#define OMAP2_DEVICE_TYPE_BAD           4
-int omap_type(void);
-/*
- * omap_rev bits:
- * CPU id bits  (0730, 1510, 1710, 2422...)     [31:16]
- * CPU revision (See _REV_ defined in cpu.h)    [15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...)   [07:00]
- */
-unsigned int omap_rev(void);
-/*
- * Get the CPU revision for OMAP devices
- */
-#define GET_OMAP_REVISION()     ((omap_rev() >> 8) & 0xff)
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():    True for OMAP730, OMAP850
- * cpu_is_omap15xx():   True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():   True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():   True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():   True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():   True for OMAP2430
- * cpu_is_omap343x():   True for OMAP3430
- * cpu_is_omap443x():   True for OMAP4430
- * cpu_is_omap446x():   True for OMAP4460
- * cpu_is_omap447x():   True for OMAP4470
- * soc_is_omap543x():   True for OMAP5430, OMAP5432
- */
-#define GET_OMAP_CLASS  (omap_rev() & 0xff)
-#define IS_OMAP_CLASS(class, id)                        \
-static inline int is_omap ##class (void)                \
-{                                                       \
-        return (GET_OMAP_CLASS == (id)) ? 1 : 0;        \
-}
-#define GET_AM_CLASS    ((omap_rev() >> 24) & 0xff)
-#define IS_AM_CLASS(class, id)                          \
-static inline int is_am ##class (void)                  \
-{                                                       \
-        return (GET_AM_CLASS == (id)) ? 1 : 0;          \
-}
-#define GET_TI_CLASS    ((omap_rev() >> 24) & 0xff)
-#define IS_TI_CLASS(class, id)                  \
-static inline int is_ti ##class (void)          \
-{                                                       \
-        return (GET_TI_CLASS == (id)) ? 1 : 0;  \
-}
-#define GET_OMAP_SUBCLASS       ((omap_rev() >> 20) & 0x0fff)
-#define IS_OMAP_SUBCLASS(subclass, id)                  \
-static inline int is_omap ##subclass (void)             \
-{                                                       \
-        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
-}
-#define IS_TI_SUBCLASS(subclass, id)                    \
-static inline int is_ti ##subclass (void)               \
-{                                                       \
-        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
-}
-#define IS_AM_SUBCLASS(subclass, id)                    \
-static inline int is_am ##subclass (void)               \
-{                                                       \
-        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
-}
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-IS_OMAP_CLASS(44xx, 0x44)
-IS_AM_CLASS(35xx, 0x35)
-IS_OMAP_CLASS(54xx, 0x54)
-IS_AM_CLASS(33xx, 0x33)
-IS_TI_CLASS(81xx, 0x81)
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-IS_OMAP_SUBCLASS(363x, 0x363)
-IS_OMAP_SUBCLASS(443x, 0x443)
-IS_OMAP_SUBCLASS(446x, 0x446)
-IS_OMAP_SUBCLASS(447x, 0x447)
-IS_OMAP_SUBCLASS(543x, 0x543)
-IS_TI_SUBCLASS(816x, 0x816)
-IS_TI_SUBCLASS(814x, 0x814)
-IS_AM_SUBCLASS(335x, 0x335)
-#define cpu_is_omap7xx()                0
-#define cpu_is_omap15xx()               0
-#define cpu_is_omap16xx()               0
-#define cpu_is_omap24xx()               0
-#define cpu_is_omap242x()               0
-#define cpu_is_omap243x()               0
-#define cpu_is_omap34xx()               0
-#define cpu_is_omap343x()               0
-#define cpu_is_ti81xx()                 0
-#define cpu_is_ti816x()                 0
-#define cpu_is_ti814x()                 0
-#define soc_is_am35xx()                 0
-#define soc_is_am33xx()                 0
-#define soc_is_am335x()                 0
-#define cpu_is_omap44xx()               0
-#define cpu_is_omap443x()               0
-#define cpu_is_omap446x()               0
-#define cpu_is_omap447x()               0
-#define soc_is_omap54xx()               0
-#define soc_is_omap543x()               0
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()              is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()              is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()             is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()             is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()              1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()              1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()             1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()             1
-# endif
-#endif
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()             is_omap24xx()
-# endif
-# if defined (CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()             is_omap242x()
-# endif
-# if defined (CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()             is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()             is_omap34xx()
-#  define cpu_is_omap343x()             is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()             1
-# endif
-# if defined(CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()             1
-# endif
-# if defined(CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()             1
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()             1
-# endif
-# if defined(CONFIG_SOC_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()             1
-# endif
-#endif
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap310():    True for OMAP310
- * cpu_is_omap1510():   True for OMAP1510
- * cpu_is_omap1610():   True for OMAP1610
- * cpu_is_omap1611():   True for OMAP1611
- * cpu_is_omap5912():   True for OMAP5912
- * cpu_is_omap1621():   True for OMAP1621
- * cpu_is_omap1710():   True for OMAP1710
- * cpu_is_omap2420():   True for OMAP2420
- * cpu_is_omap2422():   True for OMAP2422
- * cpu_is_omap2423():   True for OMAP2423
- * cpu_is_omap2430():   True for OMAP2430
- * cpu_is_omap3430():   True for OMAP3430
- */
-#define GET_OMAP_TYPE   ((omap_rev() >> 16) & 0xffff)
-#define IS_OMAP_TYPE(type, id)                          \
-static inline int is_omap ##type (void)                 \
-{                                                       \
-        return (GET_OMAP_TYPE == (id)) ? 1 : 0;         \
-}
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-#define cpu_is_omap310()                0
-#define cpu_is_omap1510()               0
-#define cpu_is_omap1610()               0
-#define cpu_is_omap5912()               0
-#define cpu_is_omap1611()               0
-#define cpu_is_omap1621()               0
-#define cpu_is_omap1710()               0
-#define cpu_is_omap2420()               0
-#define cpu_is_omap2422()               0
-#define cpu_is_omap2423()               0
-#define cpu_is_omap2430()               0
-#define cpu_is_omap3430()               0
-#define cpu_is_omap3630()               0
-#define soc_is_omap5430()               0
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 310 vs. 1510 and 1611B/5912 vs. 1710.
- */
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()               is_omap310()
-# define cpu_is_omap1510()              is_omap1510()
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()              is_omap1610()
-# define cpu_is_omap1611()              is_omap1611()
-# define cpu_is_omap5912()              is_omap5912()
-# define cpu_is_omap1621()              is_omap1621()
-# define cpu_is_omap1710()              is_omap1710()
-#endif
-#if defined(CONFIG_ARCH_OMAP2)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()              is_omap2420()
-# define cpu_is_omap2422()              is_omap2422()
-# define cpu_is_omap2423()              is_omap2423()
-# define cpu_is_omap2430()              is_omap2430()
-#endif
-#if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
-# undef soc_is_am35xx
-# define cpu_is_omap3430()              is_omap3430()
-# undef cpu_is_omap3630
-# define cpu_is_omap3630()              is_omap363x()
-# define cpu_is_ti81xx()                is_ti81xx()
-# define cpu_is_ti816x()                is_ti816x()
-# define cpu_is_ti814x()                is_ti814x()
-# define soc_is_am35xx()                is_am35xx()
 #endif
-# if defined(CONFIG_SOC_AM33XX)
+#ifdef CONFIG_ARCH_OMAP2PLUS
-# undef soc_is_am33xx
+#include "../../mach-omap2/soc.h"
-# undef soc_is_am335x
-# define soc_is_am33xx()                is_am33xx()
-# define soc_is_am335x()                is_am335x()
 #endif
-# if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx()              is_omap44xx()
-# define cpu_is_omap443x()              is_omap443x()
-# define cpu_is_omap446x()              is_omap446x()
-# define cpu_is_omap447x()              is_omap447x()
-# endif
-# if defined(CONFIG_SOC_OMAP5)
-# undef soc_is_omap54xx
-# undef soc_is_omap543x
-# define soc_is_omap54xx()              is_omap54xx()
-# define soc_is_omap543x()              is_omap543x()
-#endif
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()    (cpu_is_omap7xx() || cpu_is_omap15xx() || \
-                                cpu_is_omap16xx())
-#define cpu_class_is_omap2()    (cpu_is_omap24xx() || cpu_is_omap34xx() || \
-                                cpu_is_omap44xx() || soc_is_omap54xx() || \
-                                soc_is_am33xx())
-/* Various silicon revisions for omap2 */
-#define OMAP242X_CLASS          0x24200024
-#define OMAP2420_REV_ES1_0      OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0      (OMAP242X_CLASS | (0x1 << 8))
-#define OMAP243X_CLASS          0x24300024
-#define OMAP2430_REV_ES1_0      OMAP243X_CLASS
-#define OMAP343X_CLASS          0x34300034
-#define OMAP3430_REV_ES1_0      OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0      (OMAP343X_CLASS | (0x1 << 8))
-#define OMAP3430_REV_ES2_1      (OMAP343X_CLASS | (0x2 << 8))
-#define OMAP3430_REV_ES3_0      (OMAP343X_CLASS | (0x3 << 8))
-#define OMAP3430_REV_ES3_1      (OMAP343X_CLASS | (0x4 << 8))
-#define OMAP3430_REV_ES3_1_2    (OMAP343X_CLASS | (0x5 << 8))
-#define OMAP363X_CLASS          0x36300034
-#define OMAP3630_REV_ES1_0      OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1      (OMAP363X_CLASS | (0x1 << 8))
-#define OMAP3630_REV_ES1_2      (OMAP363X_CLASS | (0x2 << 8))
-#define TI816X_CLASS            0x81600034
-#define TI8168_REV_ES1_0        TI816X_CLASS
-#define TI8168_REV_ES1_1        (TI816X_CLASS | (0x1 << 8))
-#define TI814X_CLASS            0x81400034
-#define TI8148_REV_ES1_0        TI814X_CLASS
-#define TI8148_REV_ES2_0        (TI814X_CLASS | (0x1 << 8))
-#define TI8148_REV_ES2_1        (TI814X_CLASS | (0x2 << 8))
-#define AM35XX_CLASS            0x35170034
-#define AM35XX_REV_ES1_0        AM35XX_CLASS
-#define AM35XX_REV_ES1_1        (AM35XX_CLASS | (0x1 << 8))
-#define AM335X_CLASS            0x33500033
-#define AM335X_REV_ES1_0        AM335X_CLASS
-#define OMAP443X_CLASS          0x44300044
-#define OMAP4430_REV_ES1_0      (OMAP443X_CLASS | (0x10 << 8))
-#define OMAP4430_REV_ES2_0      (OMAP443X_CLASS | (0x20 << 8))
-#define OMAP4430_REV_ES2_1      (OMAP443X_CLASS | (0x21 << 8))
-#define OMAP4430_REV_ES2_2      (OMAP443X_CLASS | (0x22 << 8))
-#define OMAP4430_REV_ES2_3      (OMAP443X_CLASS | (0x23 << 8))
-#define OMAP446X_CLASS          0x44600044
-#define OMAP4460_REV_ES1_0      (OMAP446X_CLASS | (0x10 << 8))
-#define OMAP4460_REV_ES1_1      (OMAP446X_CLASS | (0x11 << 8))
-#define OMAP447X_CLASS          0x44700044
-#define OMAP4470_REV_ES1_0      (OMAP447X_CLASS | (0x10 << 8))
-#define OMAP54XX_CLASS          0x54000054
-#define OMAP5430_REV_ES1_0      (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
-#define OMAP5432_REV_ES1_0      (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
-void omap2xxx_check_revision(void);
-void omap3xxx_check_revision(void);
-void omap4xxx_check_revision(void);
-void omap5xxx_check_revision(void);
-void omap3xxx_check_features(void);
-void ti81xx_check_features(void);
-void omap4xxx_check_features(void);
-/*
- * Runtime detection of OMAP3 features
- *
- * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
- *    family have OS-level control over the I/O chain clock.  This is
- *    to avoid a window during which wakeups could potentially be lost
- *    during powerdomain transitions.  If this bit is set, it
- *    indicates that the chip does support OS-level control of this
- *    feature.
- */
-extern u32 omap_features;
-#define OMAP3_HAS_L2CACHE               BIT(0)
-#define OMAP3_HAS_IVA                   BIT(1)
-#define OMAP3_HAS_SGX                   BIT(2)
-#define OMAP3_HAS_NEON                  BIT(3)
-#define OMAP3_HAS_ISP                   BIT(4)
-#define OMAP3_HAS_192MHZ_CLK            BIT(5)
-#define OMAP3_HAS_IO_WAKEUP             BIT(6)
-#define OMAP3_HAS_SDRC                  BIT(7)
-#define OMAP3_HAS_IO_CHAIN_CTRL         BIT(8)
-#define OMAP4_HAS_MPU_1GHZ              BIT(9)
-#define OMAP4_HAS_MPU_1_2GHZ            BIT(10)
-#define OMAP4_HAS_MPU_1_5GHZ            BIT(11)
-#define OMAP3_HAS_FEATURE(feat,flag)                    \
-static inline unsigned int omap3_has_ ##feat(void)      \
-{                                                       \
-        return omap_features & OMAP3_HAS_ ##flag;       \
-}                                                       \
-OMAP3_HAS_FEATURE(l2cache, L2CACHE)
-OMAP3_HAS_FEATURE(sgx, SGX)
-OMAP3_HAS_FEATURE(iva, IVA)
-OMAP3_HAS_FEATURE(neon, NEON)
-OMAP3_HAS_FEATURE(isp, ISP)
-OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
-OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
-OMAP3_HAS_FEATURE(sdrc, SDRC)
-OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
-/*
- * Runtime detection of OMAP4 features
- */
-#define OMAP4_HAS_FEATURE(feat, flag)                   \
-static inline unsigned int omap4_has_ ##feat(void)      \
-{                                                       \
-        return omap_features & OMAP4_HAS_ ##flag;       \
-}                                                       \
-OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
-OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
-OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
-#endif  /* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h
deleted file mode 100644
index 1f767cb2f38a..000000000000
--- a/arch/arm/plat-omap/include/plat/dma-44xx.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * OMAP4 SDMA channel definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley (paul@pwsan.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-#define OMAP44XX_DMA_SYS_REQ0                   2
-#define OMAP44XX_DMA_SYS_REQ1                   3
-#define OMAP44XX_DMA_GPMC                       4
-#define OMAP44XX_DMA_DSS_DISPC_REQ              6
-#define OMAP44XX_DMA_SYS_REQ2                   7
-#define OMAP44XX_DMA_MCASP1_AXEVT               8
-#define OMAP44XX_DMA_ISS_REQ1                   9
-#define OMAP44XX_DMA_ISS_REQ2                   10
-#define OMAP44XX_DMA_MCASP1_AREVT               11
-#define OMAP44XX_DMA_ISS_REQ3                   12
-#define OMAP44XX_DMA_ISS_REQ4                   13
-#define OMAP44XX_DMA_DSS_RFBI_REQ               14
-#define OMAP44XX_DMA_SPI3_TX0                   15
-#define OMAP44XX_DMA_SPI3_RX0                   16
-#define OMAP44XX_DMA_MCBSP2_TX                  17
-#define OMAP44XX_DMA_MCBSP2_RX                  18
-#define OMAP44XX_DMA_MCBSP3_TX                  19
-#define OMAP44XX_DMA_MCBSP3_RX                  20
-#define OMAP44XX_DMA_C2C_SSCM_GPO0              21
-#define OMAP44XX_DMA_C2C_SSCM_GPO1              22
-#define OMAP44XX_DMA_SPI3_TX1                   23
-#define OMAP44XX_DMA_SPI3_RX1                   24
-#define OMAP44XX_DMA_I2C3_TX                    25
-#define OMAP44XX_DMA_I2C3_RX                    26
-#define OMAP44XX_DMA_I2C1_TX                    27
-#define OMAP44XX_DMA_I2C1_RX                    28
-#define OMAP44XX_DMA_I2C2_TX                    29
-#define OMAP44XX_DMA_I2C2_RX                    30
-#define OMAP44XX_DMA_MCBSP4_TX                  31
-#define OMAP44XX_DMA_MCBSP4_RX                  32
-#define OMAP44XX_DMA_MCBSP1_TX                  33
-#define OMAP44XX_DMA_MCBSP1_RX                  34
-#define OMAP44XX_DMA_SPI1_TX0                   35
-#define OMAP44XX_DMA_SPI1_RX0                   36
-#define OMAP44XX_DMA_SPI1_TX1                   37
-#define OMAP44XX_DMA_SPI1_RX1                   38
-#define OMAP44XX_DMA_SPI1_TX2                   39
-#define OMAP44XX_DMA_SPI1_RX2                   40
-#define OMAP44XX_DMA_SPI1_TX3                   41
-#define OMAP44XX_DMA_SPI1_RX3                   42
-#define OMAP44XX_DMA_SPI2_TX0                   43
-#define OMAP44XX_DMA_SPI2_RX0                   44
-#define OMAP44XX_DMA_SPI2_TX1                   45
-#define OMAP44XX_DMA_SPI2_RX1                   46
-#define OMAP44XX_DMA_MMC2_TX                    47
-#define OMAP44XX_DMA_MMC2_RX                    48
-#define OMAP44XX_DMA_UART1_TX                   49
-#define OMAP44XX_DMA_UART1_RX                   50
-#define OMAP44XX_DMA_UART2_TX                   51
-#define OMAP44XX_DMA_UART2_RX                   52
-#define OMAP44XX_DMA_UART3_TX                   53
-#define OMAP44XX_DMA_UART3_RX                   54
-#define OMAP44XX_DMA_UART4_TX                   55
-#define OMAP44XX_DMA_UART4_RX                   56
-#define OMAP44XX_DMA_MMC4_TX                    57
-#define OMAP44XX_DMA_MMC4_RX                    58
-#define OMAP44XX_DMA_MMC5_TX                    59
-#define OMAP44XX_DMA_MMC5_RX                    60
-#define OMAP44XX_DMA_MMC1_TX                    61
-#define OMAP44XX_DMA_MMC1_RX                    62
-#define OMAP44XX_DMA_SYS_REQ3                   64
-#define OMAP44XX_DMA_MCPDM_UP                   65
-#define OMAP44XX_DMA_MCPDM_DL                   66
-#define OMAP44XX_DMA_DMIC_REQ                   67
-#define OMAP44XX_DMA_C2C_SSCM_GPO2              68
-#define OMAP44XX_DMA_C2C_SSCM_GPO3              69
-#define OMAP44XX_DMA_SPI4_TX0                   70
-#define OMAP44XX_DMA_SPI4_RX0                   71
-#define OMAP44XX_DMA_DSS_DSI1_REQ0              72
-#define OMAP44XX_DMA_DSS_DSI1_REQ1              73
-#define OMAP44XX_DMA_DSS_DSI1_REQ2              74
-#define OMAP44XX_DMA_DSS_DSI1_REQ3              75
-#define OMAP44XX_DMA_DSS_HDMI_REQ               76
-#define OMAP44XX_DMA_MMC3_TX                    77
-#define OMAP44XX_DMA_MMC3_RX                    78
-#define OMAP44XX_DMA_USIM_TX                    79
-#define OMAP44XX_DMA_USIM_RX                    80
-#define OMAP44XX_DMA_DSS_DSI2_REQ0              81
-#define OMAP44XX_DMA_DSS_DSI2_REQ1              82
-#define OMAP44XX_DMA_DSS_DSI2_REQ2              83
-#define OMAP44XX_DMA_DSS_DSI2_REQ3              84
-#define OMAP44XX_DMA_SLIMBUS1_TX0               85
-#define OMAP44XX_DMA_SLIMBUS1_TX1               86
-#define OMAP44XX_DMA_SLIMBUS1_TX2               87
-#define OMAP44XX_DMA_SLIMBUS1_TX3               88
-#define OMAP44XX_DMA_SLIMBUS1_RX0               89
-#define OMAP44XX_DMA_SLIMBUS1_RX1               90
-#define OMAP44XX_DMA_SLIMBUS1_RX2               91
-#define OMAP44XX_DMA_SLIMBUS1_RX3               92
-#define OMAP44XX_DMA_SLIMBUS2_TX0               93
-#define OMAP44XX_DMA_SLIMBUS2_TX1               94
-#define OMAP44XX_DMA_SLIMBUS2_TX2               95
-#define OMAP44XX_DMA_SLIMBUS2_TX3               96
-#define OMAP44XX_DMA_SLIMBUS2_RX0               97
-#define OMAP44XX_DMA_SLIMBUS2_RX1               98
-#define OMAP44XX_DMA_SLIMBUS2_RX2               99
-#define OMAP44XX_DMA_SLIMBUS2_RX3               100
-#define OMAP44XX_DMA_ABE_REQ_0                  101
-#define OMAP44XX_DMA_ABE_REQ_1                  102
-#define OMAP44XX_DMA_ABE_REQ_2                  103
-#define OMAP44XX_DMA_ABE_REQ_3                  104
-#define OMAP44XX_DMA_ABE_REQ_4                  105
-#define OMAP44XX_DMA_ABE_REQ_5                  106
-#define OMAP44XX_DMA_ABE_REQ_6                  107
-#define OMAP44XX_DMA_ABE_REQ_7                  108
-#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ          109
-#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ         110
-#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ        111
-#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ          112
-#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ         113
-#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ        114
-#define OMAP44XX_DMA_DES_P_CTX_IN_REQ           115
-#define OMAP44XX_DMA_DES_P_DATA_IN_REQ          116
-#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ         117
-#define OMAP44XX_DMA_SHA2_CTXIN_P               118
-#define OMAP44XX_DMA_SHA2_DIN_P                 119
-#define OMAP44XX_DMA_SHA2_CTXOUT_P              120
-#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ     121
-#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ     122
-#define OMAP44XX_DMA_I2C4_TX                    124
-#define OMAP44XX_DMA_I2C4_RX                    125
-#endif
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
deleted file mode 100644
index bd3c6324ae1f..000000000000
--- a/arch/arm/plat-omap/include/plat/fpga.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-extern void omap1510_fpga_init_irq(void);
-#define fpga_read(reg)                  __raw_readb(reg)
-#define fpga_write(val, reg)            __raw_writeb(val, reg)
-/*
- * ---------------------------------------------------------------------------
- *  H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE              0xE8000000              /* VA */
-#define H2P2_DBG_FPGA_SIZE              SZ_4K                   /* SIZE */
-#define H2P2_DBG_FPGA_START             0x04000000              /* PA */
-#define H2P2_DBG_FPGA_ETHR_START        (H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV          IOMEM(H2P2_DBG_FPGA_BASE + 0x10)        /* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV         IOMEM(H2P2_DBG_FPGA_BASE + 0x12)        /* Board Revision */
-#define H2P2_DBG_FPGA_GPIO              IOMEM(H2P2_DBG_FPGA_BASE + 0x14)        /* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS              IOMEM(H2P2_DBG_FPGA_BASE + 0x16)        /* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS       IOMEM(H2P2_DBG_FPGA_BASE + 0x18)        /* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS        IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)        /* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET         IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)        /* LAN Reset line */
-/* NOTE:  most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
-        /* offset 0x00 */
-        u16             smc91x[8];
-        /* offset 0x10 */
-        u16             fpga_rev;
-        u16             board_rev;
-        u16             gpio_outputs;
-        u16             leds;
-        /* offset 0x18 */
-        u16             misc_inputs;
-        u16             lan_status;
-        u16             lan_reset;
-        u16             reserved0;
-        /* offset 0x20 */
-        u16             ps2_data;
-        u16             ps2_ctrl;
-        /* plus also 4 rs232 ports ... */
-};
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN         (1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER         (1 << 14)
-#define H2P2_DBG_FPGA_LED_RED           (1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE          (1 << 12)
-/*  cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER        (1 << 0)        // A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE   11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK   ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-#define H2P2_DBG_FPGA_P2_LED_TIMER              (1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE               (1 << 1)
-/*
- * ---------------------------------------------------------------------------
- *  OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE              0xE8000000              /* VA */
-#define OMAP1510_FPGA_SIZE              SZ_4K
-#define OMAP1510_FPGA_START             0x08000000              /* PA */
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW                   IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH                  IOMEM(OMAP1510_FPGA_BASE + 0x1)
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL         IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT                 IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI                  IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER                     IOMEM(OMAP1510_FPGA_BASE + 0x5)
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO                    IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI                    IOMEM(OMAP1510_FPGA_BASE + 0x7)
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO                    IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI                    IOMEM(OMAP1510_FPGA_BASE + 0x9)
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET                IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST                       IOMEM(OMAP1510_FPGA_BASE + 0xb)
-#define OMAP1510_FPGA_AUDIO                     IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP                       IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO                   IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1                     IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2                     IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS           IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV                 IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA                     IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS                   IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL                  IOMEM(OMAP1510_FPGA_BASE + 0x102)
-#define OMAP1510_FPGA_TOUCHSCREEN               IOMEM(OMAP1510_FPGA_BASE + 0x204)
-#define INNOVATOR_FPGA_INFO                     IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO            IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI            IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO               IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI               IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO               IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI               IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL          IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL              IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2                     IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2                     IOMEM(OMAP1510_FPGA_BASE + 0x210)
-#define OMAP1510_FPGA_ETHR_START                (OMAP1510_FPGA_START + 0x300)
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE               0x42
-#define OMAP1510_FPGA_PCR_IF_PD0                (1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN               (1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN               (1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0               (1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1               (1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK             (1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK              (1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0            (1 << 0)
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK  (1<<0)  /* output */
-#define OMAP1510_FPGA_HID_MOSI  (1<<1)  /* output */
-#define OMAP1510_FPGA_HID_nSS   (1<<2)  /* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS (1<<3)  /* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO  (1<<4)  /* input */
-#define OMAP1510_FPGA_HID_ATN   (1<<5)  /* input  0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd (1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA               (IH_GPIO_BASE + 13)
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN           (OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK           (OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2              (OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3              (OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4              (OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5              (OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6              (OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7              (OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8              (OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9              (OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10             (OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11             (OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12             (OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER              (OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1          (OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2          (OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS            (OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17             (OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM           (OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A         (OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B         (OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD            (OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22             (OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23             (OMAP_FPGA_IRQ_BASE + 23)
-#endif
diff --git a/arch/arm/plat-omap/include/plat/led.h b/arch/arm/plat-omap/include/plat/led.h
deleted file mode 100644
index 25e451e7e2fd..000000000000
--- a/arch/arm/plat-omap/include/plat/led.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/led.h
- *
- *  Copyright (C) 2006 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_LED_H
-#define ASMARM_ARCH_LED_H
-struct omap_led_config {
-        struct led_classdev     cdev;
-        s16                     gpio;
-};
-struct omap_led_platform_data {
-        s16                     nr_leds;
-        struct omap_led_config  *leds;
-};
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
deleted file mode 100644
index 8b4e4f2da2f5..000000000000
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-#include <plat/omap_hwmod.h>
-#define OMAP15XX_NR_MMC         1
-#define OMAP16XX_NR_MMC         2
-#define OMAP1_MMC_SIZE          0x080
-#define OMAP1_MMC1_BASE         0xfffb7800
-#define OMAP1_MMC2_BASE         0xfffb7c00      /* omap16xx only */
-#define OMAP24XX_NR_MMC         2
-#define OMAP2420_MMC_SIZE       OMAP1_MMC_SIZE
-#define OMAP2_MMC1_BASE         0x4809c000
-#define OMAP4_MMC_REG_OFFSET    0x100
-#define OMAP_MMC_MAX_SLOTS      2
-/*
- * struct omap_mmc_dev_attr.flags possibilities
- *
- * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
- *    operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
- *    should be set if this is the case.  See for example Section 22.5.3
- *    "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
- *    Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
- *
- * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
- *    don't work correctly on some MMC controller instances on some
- *    OMAP3 SoCs; this flag should be set if this is the case.  See
- *    for example Advisory 2.1.1.128 "MMC: Multiple Block Read
- *    Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
- *    Revision F (October 2010) (SPRZ278F).
- */
-#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT           BIT(0)
-#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ       BIT(1)
-struct omap_mmc_dev_attr {
-        u8 flags;
-};
-struct omap_mmc_platform_data {
-        /* back-link to device */
-        struct device *dev;
-        /* number of slots per controller */
-        unsigned nr_slots:2;
-        /* set if your board has components or wiring that limits the
-         * maximum frequency on the MMC bus */
-        unsigned int max_freq;
-        /* switch the bus to a new slot */
-        int (*switch_slot)(struct device *dev, int slot);
-        /* initialize board-specific MMC functionality, can be NULL if
-         * not supported */
-        int (*init)(struct device *dev);
-        void (*cleanup)(struct device *dev);
-        void (*shutdown)(struct device *dev);
-        /* To handle board related suspend/resume functionality for MMC */
-        int (*suspend)(struct device *dev, int slot);
-        int (*resume)(struct device *dev, int slot);
-        /* Return context loss count due to PM states changing */
-        int (*get_context_loss_count)(struct device *dev);
-        /* Integrating attributes from the omap_hwmod layer */
-        u8 controller_flags;
-        /* Register offset deviation */
-        u16 reg_offset;
-        struct omap_mmc_slot_data {
-                /*
-                 * 4/8 wires and any additional host capabilities
-                 * need to OR'd all capabilities (ref. linux/mmc/host.h)
-                 */
-                u8  wires;      /* Used for the MMC driver on omap1 and 2420 */
-                u32 caps;       /* Used for the MMC driver on 2430 and later */
-                u32 pm_caps;    /* PM capabilities of the mmc */
-                /*
-                 * nomux means "standard" muxing is wrong on this board, and
-                 * that board-specific code handled it before common init logic.
-                 */
-                unsigned nomux:1;
-                /* switch pin can be for card detect (default) or card cover */
-                unsigned cover:1;
-                /* use the internal clock */
-                unsigned internal_clock:1;
-                /* nonremovable e.g. eMMC */
-                unsigned nonremovable:1;
-                /* Try to sleep or power off when possible */
-                unsigned power_saving:1;
-                /* If using power_saving and the MMC power is not to go off */
-                unsigned no_off:1;
-                /* eMMC does not handle power off when not in sleep state */
-                unsigned no_regulator_off_init:1;
-                /* Regulator off remapped to sleep */
-                unsigned vcc_aux_disable_is_sleep:1;
-                /* we can put the features above into this variable */
-#define HSMMC_HAS_PBIAS         (1 << 0)
-#define HSMMC_HAS_UPDATED_RESET (1 << 1)
-                unsigned features;
-                int switch_pin;                 /* gpio (card detect) */
-                int gpio_wp;                    /* gpio (write protect) */
-                int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
-                int (*set_power)(struct device *dev, int slot,
-                                 int power_on, int vdd);
-                int (*get_ro)(struct device *dev, int slot);
-                void (*remux)(struct device *dev, int slot, int power_on);
-                /* Call back before enabling / disabling regulators */
-                void (*before_set_reg)(struct device *dev, int slot,
-                                       int power_on, int vdd);
-                /* Call back after enabling / disabling regulators */
-                void (*after_set_reg)(struct device *dev, int slot,
-                                      int power_on, int vdd);
-                /* if we have special card, init it using this callback */
-                void (*init_card)(struct mmc_card *card);
-                /* return MMC cover switch state, can be NULL if not supported.
-                 *
-                 * possible return values:
-                 *   0 - closed
-                 *   1 - open
-                 */
-                int (*get_cover_state)(struct device *dev, int slot);
-                const char *name;
-                u32 ocr_mask;
-                /* Card detection IRQs */
-                int card_detect_irq;
-                int (*card_detect)(struct device *dev, int slot);
-                unsigned int ban_openended:1;
-        } slots[OMAP_MMC_MAX_SLOTS];
-};
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
-                                        int is_closed);
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-                                int nr_controllers);
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-                                int nr_controllers)
-{
-}
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-extern int omap_msdi_reset(struct omap_hwmod *oh);
-#endif
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
deleted file mode 100644
index 324d31b14852..000000000000
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Support for compiling in multiple OMAP processors
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __PLAT_OMAP_MULTI_H
-#define __PLAT_OMAP_MULTI_H
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap4
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP5
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap5
-# endif
-#endif
-#ifdef CONFIG_SOC_AM33XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME am33xx
-# endif
-#endif
-#endif  /* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
deleted file mode 100644
index 0e4acd2d2deb..000000000000
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __OMAP_SECURE_H__
-#define __OMAP_SECURE_H__
-#include <linux/types.h>
-extern int omap_secure_ram_reserve_memblock(void);
-#ifdef CONFIG_OMAP4_ERRATA_I688
-extern int omap_barrier_reserve_memblock(void);
-#else
-static inline void omap_barrier_reserve_memblock(void)
-{ }
-#endif
-#endif /* __OMAP_SECURE_H__ */
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
deleted file mode 100644
index 36d6a7666216..000000000000
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Tony Lindgren
- * Paul Walmsley
- * Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-#define SDRC_SYSCONFIG          0x010
-#define SDRC_CS_CFG             0x040
-#define SDRC_SHARING            0x044
-#define SDRC_ERR_TYPE           0x04C
-#define SDRC_DLLA_CTRL          0x060
-#define SDRC_DLLA_STATUS        0x064
-#define SDRC_DLLB_CTRL          0x068
-#define SDRC_DLLB_STATUS        0x06C
-#define SDRC_POWER              0x070
-#define SDRC_MCFG_0             0x080
-#define SDRC_MR_0               0x084
-#define SDRC_EMR2_0             0x08c
-#define SDRC_ACTIM_CTRL_A_0     0x09c
-#define SDRC_ACTIM_CTRL_B_0     0x0a0
-#define SDRC_RFR_CTRL_0         0x0a4
-#define SDRC_MANUAL_0           0x0a8
-#define SDRC_MCFG_1             0x0B0
-#define SDRC_MR_1               0x0B4
-#define SDRC_EMR2_1             0x0BC
-#define SDRC_ACTIM_CTRL_A_1     0x0C4
-#define SDRC_ACTIM_CTRL_B_1     0x0C8
-#define SDRC_RFR_CTRL_1         0x0D4
-#define SDRC_MANUAL_1           0x0D8
-#define SDRC_POWER_AUTOCOUNT_SHIFT      8
-#define SDRC_POWER_AUTOCOUNT_MASK       (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
-#define SDRC_POWER_CLKCTRL_SHIFT        4
-#define SDRC_POWER_CLKCTRL_MASK         (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
-#define SDRC_SELF_REFRESH_ON_AUTOCOUNT  (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration. A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz    (0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz    (0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz    (0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz    (0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS    (0x00005000 | 1) /* Need to calc */
-/*
- * SMS register access
- */
-#define OMAP242X_SMS_REGADDR(reg)                                       \
-                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)                                       \
-                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)                                       \
-                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-#define SMS_SYSCONFIG                   0x010
-#define SMS_ROT_CONTROL(context)        (0x180 + 0x10 * context)
-#define SMS_ROT_SIZE(context)           (0x184 + 0x10 * context)
-#define SMS_ROT_PHYSICAL_BA(context)    (0x188 + 0x10 * context)
-/* REVISIT: fill in other SMS registers here */
-#ifndef __ASSEMBLER__
-/**
- * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
- * @rate: SDRC clock rate (in Hz)
- * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
- * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
- * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
- * @mr: Value to program to SDRC_MR for this rate
- *
- * This structure holds a pre-computed set of register values for the
- * SDRC for a given SDRC clock rate and SDRAM chip.  These are
- * intended to be pre-computed and specified in an array in the board-*.c
- * files.  The structure is keyed off the 'rate' field.
- */
-struct omap_sdrc_params {
-        unsigned long rate;
-        u32 actim_ctrla;
-        u32 actim_ctrlb;
-        u32 rfr_ctrl;
-        u32 mr;
-};
-#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
-void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-                            struct omap_sdrc_params *sdrc_cs1);
-#else
-static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-                                          struct omap_sdrc_params *sdrc_cs1) {};
-#endif
-int omap2_sdrc_get_params(unsigned long r,
-                          struct omap_sdrc_params **sdrc_cs0,
-                          struct omap_sdrc_params **sdrc_cs1);
-void omap2_sms_save_context(void);
-void omap2_sms_restore_context(void);
-void omap2_sms_write_rot_control(u32 val, unsigned ctx);
-void omap2_sms_write_rot_size(u32 val, unsigned ctx);
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
-#ifdef CONFIG_ARCH_OMAP2
-struct memory_timings {
-        u32 m_type;             /* ddr = 1, sdr = 0 */
-        u32 dll_mode;           /* use lock mode = 1, unlock mode = 0 */
-        u32 slow_dll_ctrl;      /* unlock mode, dll value for slow speed */
-        u32 fast_dll_ctrl;      /* unlock mode, dll value for fast speed */
-        u32 base_cs;            /* base chip select to use for calculations */
-};
-extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
-u32 omap2xxx_sdrc_dll_is_unlocked(void);
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
-#endif  /* CONFIG_ARCH_OMAP2 */
-#endif  /* __ASSEMBLER__ */
-#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
deleted file mode 100644
index 227ae2657554..000000000000
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-#ifndef __ASSEMBLY__
-#include <asm/fncpy.h>
-extern void *omap_sram_push_address(unsigned long size);
-/* Macro to push a function to the internal SRAM, using the fncpy API */
-#define omap_sram_push(funcp, size) ({                          \
-        typeof(&(funcp)) _res = NULL;                           \
-        void *_sram_address = omap_sram_push_address(size);     \
-        if (_sram_address)                                      \
-                _res = fncpy(_sram_address, &(funcp), size);    \
-        _res;                                                   \
-})
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-                                u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-                                      u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-extern u32 omap3_configure_core_dpll(
-                        u32 m2, u32 unlock_dll, u32 f, u32 inc,
-                        u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-                        u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-                        u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-                        u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern void omap3_sram_restore_context(void);
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-                                                u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-                                                int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-                                                u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-                                                u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-                                                int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-                                                u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-extern u32 omap3_sram_configure_core_dpll(
-                        u32 m2, u32 unlock_dll, u32 f, u32 inc,
-                        u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-                        u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-                        u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-                        u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-#ifdef CONFIG_PM
-extern void omap_push_sram_idle(void);
-#else
-static inline void omap_push_sram_idle(void) {}
-#endif /* CONFIG_PM */
-#endif /* __ASSEMBLY__ */
-/*
- * OMAP2+: define the SRAM PA addresses.
- * Used by the SRAM management code and the idle sleep code.
- */
-#define OMAP2_SRAM_PA           0x40200000
-#define OMAP3_SRAM_PA           0x40200000
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PA           0x40304000
-#define OMAP4_SRAM_VA           0xfe404000
-#else
-#define OMAP4_SRAM_PA           0x40300000
-#endif
-#define AM33XX_SRAM_PA          0x40300000
-#endif
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h
deleted file mode 100644
index 3792bdea2f6d..000000000000
--- a/arch/arm/plat-omap/include/plat/vrfb.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * VRFB Rotation Engine
- *
- * Copyright (C) 2009 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#ifndef __OMAP_VRFB_H__
-#define __OMAP_VRFB_H__
-#define OMAP_VRFB_LINE_LEN 2048
-struct vrfb {
-        u8 context;
-        void __iomem *vaddr[4];
-        unsigned long paddr[4];
-        u16 xres;
-        u16 yres;
-        u16 xoffset;
-        u16 yoffset;
-        u8 bytespp;
-        bool yuv_mode;
-};
-#ifdef CONFIG_OMAP2_VRFB
-extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
-extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
-extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
-                u8 bytespp);
-extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp);
-extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp);
-extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
-                u16 width, u16 height,
-                unsigned bytespp, bool yuv_mode);
-extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
-extern void omap_vrfb_restore_context(void);
-#else
-static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
-static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
-static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
-                u8 bytespp) {}
-static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp)
-                { return 0; }
-static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp)
-                { return 0; }
-static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
-                u16 width, u16 height, unsigned bytespp, bool yuv_mode) {}
-static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot)
-                { return 0; }
-static inline void omap_vrfb_restore_context(void) {}
-#endif
-#endif /* __VRFB_H */
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 9722f418ae1f..198685b894b0 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -22,9 +22,8 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
-/* Interface documentation is in mach/omap-pm.h */
+#include "../mach-omap2/omap_device.h"
-#include <plat/omap-pm.h>
+#include "../mach-omap2/omap-pm.h"
-#include <plat/omap_device.h>
 static bool off_mode_enabled;
 static int dummy_context_loss_counter;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 28acb383e7df..70dcc225157f 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -25,8 +25,8 @@
 #include <asm/mach/map.h>
-#include <plat/sram.h>
+#include "../mach-omap1/soc.h"
-#include <plat/cpu.h>
+#include "../mach-omap2/soc.h"
 #include "sram.h"
diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h
index 29b43ef97f20..cefda2e09869 100644
--- a/arch/arm/plat-omap/sram.h
+++ b/arch/arm/plat-omap/sram.h
@@ -1,6 +1,107 @@
-#ifndef __PLAT_OMAP_SRAM_H__
+/*
-#define __PLAT_OMAP_SRAM_H__
+ * arch/arm/plat-omap/include/mach/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-extern int __init omap_sram_init(void);
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
-#endif /* __PLAT_OMAP_SRAM_H__ */
+#ifndef __ASSEMBLY__
+#include <asm/fncpy.h>
+int __init omap_sram_init(void);
+extern void *omap_sram_push_address(unsigned long size);
+/* Macro to push a function to the internal SRAM, using the fncpy API */
+#define omap_sram_push(funcp, size) ({                          \
+        typeof(&(funcp)) _res = NULL;                           \
+        void *_sram_address = omap_sram_push_address(size);     \
+        if (_sram_address)                                      \
+                _res = fncpy(_sram_address, &(funcp), size);    \
+        _res;                                                   \
+})
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+                                u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+                                      u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+extern u32 omap3_configure_core_dpll(
+                        u32 m2, u32 unlock_dll, u32 f, u32 inc,
+                        u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+                        u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+                        u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+                        u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+                                                u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+                                                int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+                                                u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+                                                u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+                                                int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+                                                u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+extern u32 omap3_sram_configure_core_dpll(
+                        u32 m2, u32 unlock_dll, u32 f, u32 inc,
+                        u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+                        u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+                        u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+                        u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+#endif /* __ASSEMBLY__ */
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA           0x40200000
+#define OMAP3_SRAM_PA           0x40200000
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PA           0x40304000
+#define OMAP4_SRAM_VA           0xfe404000
+#else
+#define OMAP4_SRAM_PA           0x40300000
+#endif
+#define AM33XX_SRAM_PA          0x40300000
+#endif
author	Arnd Bergmann <arnd@arndb.de>	2012-10-26 09:54:14 -0400
committer	Arnd Bergmann <arnd@arndb.de>	2012-10-26 09:54:14 -0400
commit	148a8698763130c96004ef419b5f0d44a93d413c (patch)
tree	48a3ea5484e3fc9e485d7bb1b0e3d8795c67d368 /arch
parent	ddffeb8c4d0331609ef2581d84de4d763607bd37 (diff)
parent	e4c060db2c13f10de09101afc564763f9fd0019a (diff)