ux500: remove build-time changing macros

To allow the possiblity of building U8500 and U5500 support in the same
image.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
[Rebased to latest changes in Russells tree]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>

9 files changed, 123 insertions, 117 deletions

diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index ccff2dae167f..b2b0a3b9be8f 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -136,8 +136,7 @@ EXPORT_SYMBOL(clk_disable);
  */
 static unsigned long clk_mtu_get_rate(struct clk *clk)
 {
-        void __iomem *addr = __io_address(UX500_PRCMU_BASE)
-                + PRCM_TCR;
+        void __iomem *addr;
         u32 tcr;
         int mtu = (int) clk->data;
         /*
@@ -149,13 +148,20 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
         unsigned long mturate;
         unsigned long retclk;
 
+        if (cpu_is_u5500())
+                addr = __io_address(U5500_PRCMU_BASE);
+        else if (cpu_is_u8500())
+                addr = __io_address(U8500_PRCMU_BASE);
+        else
+                ux500_unknown_soc();
+
         /*
          * On a startup, always conifgure the TCR to the doze mode;
          * bootloaders do it for us. Do this in the kernel too.
          */
-        writel(PRCM_TCR_DOZE_MODE, addr);
+        writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
 
-        tcr = readl(addr);
+        tcr = readl(addr + PRCM_TCR);
 
         /* Get the rate from the parent as a default */
         if (clk->parent_periph)
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index acc841e48de4..7b0ab8336f3f 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -22,6 +22,16 @@
 #include "devices-db5500.h"
 
 static struct map_desc u5500_io_desc[] __initdata = {
+        __IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_TWD_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
+
         __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
         __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
         __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
@@ -143,8 +153,6 @@ static void __init db5500_add_gpios(void)
 
 void __init u5500_map_io(void)
 {
-        ux500_map_io();
-
         iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
 }
 
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index c0f34a404c53..1b2b81c0f27c 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -30,6 +30,22 @@ static struct platform_device *platform_devs[] __initdata = {
 
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_io_desc[] __initdata = {
+        __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+
+        __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
+
         __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
         __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
         __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
@@ -117,8 +133,6 @@ bool cpu_is_u8500v20(void)
 
 void __init u8500_map_io(void)
 {
-        ux500_map_io();
-
         iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
 
         if (cpu_is_u8500ed())
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 5730409c0f7d..35a3af13fb30 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -23,37 +23,29 @@
 
 #include "clock.h"
 
-static struct map_desc ux500_io_desc[] __initdata = {
-        __IO_DEV_DESC(UX500_UART0_BASE, SZ_4K),
-        __IO_DEV_DESC(UX500_UART2_BASE, SZ_4K),
-
-        __IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K),
-        __IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K),
-        __IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K),
-        __IO_DEV_DESC(UX500_TWD_BASE, SZ_4K),
-        __IO_DEV_DESC(UX500_SCU_BASE, SZ_4K),
-
-        __IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K),
-        __IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K),
-        __IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K),
-        __IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K),
-        __IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K),
-
-        __IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K),
-        __IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K),
-
-        __IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
-};
+#ifdef CONFIG_CACHE_L2X0
+static void __iomem *l2x0_base;
+#endif
 
 void __init ux500_map_io(void)
 {
-        iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
 }
 
 void __init ux500_init_irq(void)
 {
-        gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE),
-                 __io_address(UX500_GIC_CPU_BASE));
+        void __iomem *dist_base;
+        void __iomem *cpu_base;
+
+        if (cpu_is_u5500()) {
+                dist_base = __io_address(U5500_GIC_DIST_BASE);
+                cpu_base = __io_address(U5500_GIC_CPU_BASE);
+        } else if (cpu_is_u8500()) {
+                dist_base = __io_address(U8500_GIC_DIST_BASE);
+                cpu_base = __io_address(U8500_GIC_CPU_BASE);
+        } else
+                ux500_unknown_soc();
+
+        gic_init(0, 29, dist_base, cpu_base);
 
         /*
          * Init clocks here so that they are available for system timer
@@ -74,7 +66,8 @@ static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
 
 static inline void ux500_cache_sync(void)
 {
-        void __iomem *base = __io_address(UX500_L2CC_BASE);
+        void __iomem *base = l2x0_base;
+
         writel_relaxed(0, base + L2X0_CACHE_SYNC);
         ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
@@ -96,20 +89,23 @@ static void ux500_l2x0_disable(void)
  */
 static void ux500_l2x0_inv_all(void)
 {
-        void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE);
+        void __iomem *base = l2x0_base;
         uint32_t l2x0_way_mask = (1<<16) - 1;   /* Bitmask of active ways */
 
         /* invalidate all ways */
-        writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
-        ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+        writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
+        ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
         ux500_cache_sync();
 }
 
 static int ux500_l2x0_init(void)
 {
-        void __iomem *l2x0_base;
-
-        l2x0_base = __io_address(UX500_L2CC_BASE);
+        if (cpu_is_u5500())
+                l2x0_base = __io_address(U5500_L2CC_BASE);
+        else if (cpu_is_u8500())
+                l2x0_base = __io_address(U8500_L2CC_BASE);
+        else
+                ux500_unknown_soc();
 
         /* 64KB way size, 8 way associativity, force WA */
         l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
@@ -127,13 +123,21 @@ static void __init ux500_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
         /* Setup the local timer base */
-        twd_base = __io_address(UX500_TWD_BASE);
+        if (cpu_is_u5500())
+                twd_base = __io_address(U5500_TWD_BASE);
+        else if (cpu_is_u8500())
+                twd_base = __io_address(U8500_TWD_BASE);
+        else
+                ux500_unknown_soc();
 #endif
-        /* Setup the MTU base */
-        if (cpu_is_u8500ed())
+        if (cpu_is_u5500())
+                mtu_base = __io_address(U5500_MTU0_BASE);
+        else if (cpu_is_u8500ed())
                 mtu_base = __io_address(U8500_MTU0_BASE_ED);
+        else if (cpu_is_u8500())
+                mtu_base = __io_address(U8500_MTU0_BASE);
         else
-                mtu_base = __io_address(UX500_MTU0_BASE);
+                ux500_unknown_soc();
 
         nmdk_timer_init();
 }
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index be7c0f14e310..700fb05ee815 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -14,7 +14,24 @@
 #error Invalid Ux500 debug UART
 #endif
 
-#define __UX500_UART(n) UX500_UART##n##_BASE
+/*
+ * DEBUG_LL only works if only one SOC is built in.  We don't use #else below
+ * in order to get "__UX500_UART redefined" warnings if more than one SOC is
+ * built, so that there's some hint during the build that something is wrong.
+ */
+
+#ifdef CONFIG_UX500_SOC_DB5500
+#define __UX500_UART(n) U5500_UART##n##_BASE
+#endif
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define __UX500_UART(n) U8500_UART##n##_BASE
+#endif
+
+#ifndef __UX500_UART
+#error Unknown SOC
+#endif
+
 #define UX500_UART(n)   __UX500_UART(n)
 #define UART_BASE       UX500_UART(CONFIG_UX500_DEBUG_UART)
 
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index a37f585a3ecb..071bba94f727 100644
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -11,15 +11,10 @@
  * warranty of any kind, whether express or implied.
  */
 #include <mach/hardware.h>
-#define HAVE_GET_IRQNR_PREAMBLE
 #include <asm/hardware/entry-macro-gic.S>
 
                 .macro  disable_fiq
                 .endm
 
-                .macro  get_irqnr_preamble, base, tmp
-                ldr     \base, =IO_ADDRESS(UX500_GIC_CPU_BASE)
-                .endm
-
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 6295cc581355..bced4a8e16ef 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -29,65 +29,6 @@
 #include <mach/db8500-regs.h>
 #include <mach/db5500-regs.h>
 
-#ifdef CONFIG_UX500_SOC_DB8500
-#define UX500(periph)           U8500_##periph##_BASE
-#elif defined(CONFIG_UX500_SOC_DB5500)
-#define UX500(periph)           U5500_##periph##_BASE
-#endif
-
-#define UX500_BACKUPRAM0_BASE   UX500(BACKUPRAM0)
-#define UX500_BACKUPRAM1_BASE   UX500(BACKUPRAM1)
-#define UX500_B2R2_BASE         UX500(B2R2)
-
-#define UX500_CLKRST1_BASE      UX500(CLKRST1)
-#define UX500_CLKRST2_BASE      UX500(CLKRST2)
-#define UX500_CLKRST3_BASE      UX500(CLKRST3)
-#define UX500_CLKRST5_BASE      UX500(CLKRST5)
-#define UX500_CLKRST6_BASE      UX500(CLKRST6)
-
-#define UX500_DMA_BASE          UX500(DMA)
-#define UX500_FSMC_BASE         UX500(FSMC)
-
-#define UX500_GIC_CPU_BASE      UX500(GIC_CPU)
-#define UX500_GIC_DIST_BASE     UX500(GIC_DIST)
-
-#define UX500_I2C1_BASE         UX500(I2C1)
-#define UX500_I2C2_BASE         UX500(I2C2)
-#define UX500_I2C3_BASE         UX500(I2C3)
-
-#define UX500_L2CC_BASE         UX500(L2CC)
-#define UX500_MCDE_BASE         UX500(MCDE)
-#define UX500_MTU0_BASE         UX500(MTU0)
-#define UX500_MTU1_BASE         UX500(MTU1)
-#define UX500_PRCMU_BASE        UX500(PRCMU)
-
-#define UX500_RNG_BASE          UX500(RNG)
-#define UX500_RTC_BASE          UX500(RTC)
-
-#define UX500_SCU_BASE          UX500(SCU)
-
-#define UX500_SDI0_BASE         UX500(SDI0)
-#define UX500_SDI1_BASE         UX500(SDI1)
-#define UX500_SDI2_BASE         UX500(SDI2)
-#define UX500_SDI3_BASE         UX500(SDI3)
-#define UX500_SDI4_BASE         UX500(SDI4)
-
-#define UX500_SPI0_BASE         UX500(SPI0)
-#define UX500_SPI1_BASE         UX500(SPI1)
-#define UX500_SPI2_BASE         UX500(SPI2)
-#define UX500_SPI3_BASE         UX500(SPI3)
-
-#define UX500_SIA_BASE          UX500(SIA)
-#define UX500_SVA_BASE          UX500(SVA)
-
-#define UX500_TWD_BASE          UX500(TWD)
-
-#define UX500_UART0_BASE        UX500(UART0)
-#define UX500_UART1_BASE        UX500(UART1)
-#define UX500_UART2_BASE        UX500(UART2)
-
-#define UX500_USBOTG_BASE       UX500(USBOTG)
-
 /* ST-Ericsson modified pl022 id */
 #define SSP_PER_ID              0x01080022
 
@@ -143,6 +84,7 @@ static inline bool cpu_is_u5500(void)
 }
 
 #define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
+#define ux500_unknown_soc()     BUG()
 
 #endif
 
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 469877e0de90..5d8423294d41 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -14,7 +14,6 @@
 #include <asm/mach/time.h>
 #include <linux/init.h>
 
-extern void __init ux500_map_io(void);
 extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index d77e76cb7edd..4fff4d408417 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -20,6 +20,7 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
+#include <mach/setup.h>
 
 /*
  * control for which core is the next to come out of the secondary
@@ -40,6 +41,18 @@ static void write_pen_release(int val)
         outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
 }
 
+static void __iomem *scu_base_addr(void)
+{
+        if (cpu_is_u5500())
+                return __io_address(U5500_SCU_BASE);
+        else if (cpu_is_u8500())
+                return __io_address(U8500_SCU_BASE);
+        else
+                ux500_unknown_soc();
+
+        return NULL;
+}
+
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
@@ -100,21 +113,28 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init wakeup_secondary(void)
 {
+        void __iomem *backupram;
+
+        if (cpu_is_u5500())
+                backupram = __io_address(U5500_BACKUPRAM0_BASE);
+        else if (cpu_is_u8500())
+                backupram = __io_address(U8500_BACKUPRAM0_BASE);
+        else
+                ux500_unknown_soc();
+
         /*
          * write the address of secondary startup into the backup ram register
          * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
          * backup ram register at offset 0x1FF0, which is what boot rom code
          * is waiting for. This would wake up the secondary core from WFE
          */
-#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
+#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
         __raw_writel(virt_to_phys(u8500_secondary_startup),
-                __io_address(UX500_BACKUPRAM0_BASE) +
-                U8500_CPU1_JUMPADDR_OFFSET);
+                     backupram + UX500_CPU1_JUMPADDR_OFFSET);
 
-#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
         __raw_writel(0xA1FEED01,
-                __io_address(UX500_BACKUPRAM0_BASE) +
-                U8500_CPU1_WAKEMAGIC_OFFSET);
+                     backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
 
         /* make sure write buffer is drained */
         mb();
@@ -126,9 +146,10 @@ static void __init wakeup_secondary(void)
  */
 void __init smp_init_cpus(void)
 {
+        void __iomem *scu_base = scu_base_addr();
         unsigned int i, ncores;
 
-        ncores = scu_get_core_count(__io_address(UX500_SCU_BASE));
+        ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
         /* sanity check */
         if (ncores > NR_CPUS) {
@@ -154,6 +175,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
         for (i = 0; i < max_cpus; i++)
                 set_cpu_present(i, true);
 
-        scu_enable(__io_address(UX500_SCU_BASE));
+        scu_enable(scu_base_addr());
         wakeup_secondary();
 }