Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6870/1: The mandatory barrier rmb() must be a dsb() in for device accesses
  ARM: 6892/1: handle ptrace requests to change PC during interrupted system calls
  ARM: 6890/1: memmap: only free allocated memmap entries when using SPARSEMEM
  ARM: zImage: the page table memory must be considered before relocation
  ARM: zImage: make sure not to relocate on top of the relocation code
  ARM: zImage: Fix bad SP address after relocating kernel
  ARM: zImage: make sure the stack is 64-bit aligned
  ARM: RiscPC: acornfb: fix section mismatches
  ARM: RiscPC: etherh: fix section mismatches

8 files changed, 97 insertions, 53 deletions

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 8ebbb511c783..0c6852d93506 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -74,7 +74,7 @@ ZTEXTADDR	:= $(CONFIG_ZBOOT_ROM_TEXT)
 ZBSSADDR        := $(CONFIG_ZBOOT_ROM_BSS)
 else
 ZTEXTADDR       := 0
-ZBSSADDR        := ALIGN(4)
+ZBSSADDR        := ALIGN(8)
 endif
 
 SEDFLAGS        = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index adf583cd0c35..49f5b2eaaa87 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -179,15 +179,14 @@ not_angel:
                 bl      cache_on
 
 restart:        adr     r0, LC0
-                ldmia   r0, {r1, r2, r3, r5, r6, r9, r11, r12}
-                ldr     sp, [r0, #32]
+                ldmia   r0, {r1, r2, r3, r6, r9, r11, r12}
+                ldr     sp, [r0, #28]
 
                 /*
                  * We might be running at a different address.  We need
                  * to fix up various pointers.
                  */
                 sub     r0, r0, r1              @ calculate the delta offset
-                add     r5, r5, r0              @ _start
                 add     r6, r6, r0              @ _edata
 
 #ifndef CONFIG_ZBOOT_ROM
@@ -206,31 +205,40 @@ restart:	adr	r0, LC0
 /*
  * Check to see if we will overwrite ourselves.
  *   r4  = final kernel address
- *   r5  = start of this image
  *   r9  = size of decompressed image
  *   r10 = end of this image, including  bss/stack/malloc space if non XIP
  * We basically want:
- *   r4 >= r10 -> OK
- *   r4 + image length <= r5 -> OK
+ *   r4 - 16k page directory >= r10 -> OK
+ *   r4 + image length <= current position (pc) -> OK
  */
+                add     r10, r10, #16384
                 cmp     r4, r10
                 bhs     wont_overwrite
                 add     r10, r4, r9
-                cmp     r10, r5
+   ARM(         cmp     r10, pc         )
+ THUMB(         mov     lr, pc          )
+ THUMB(         cmp     r10, lr         )
                 bls     wont_overwrite
 
 /*
  * Relocate ourselves past the end of the decompressed kernel.
- *   r5  = start of this image
  *   r6  = _edata
  *   r10 = end of the decompressed kernel
  * Because we always copy ahead, we need to do it from the end and go
  * backward in case the source and destination overlap.
  */
-                /* Round up to next 256-byte boundary. */
-                add     r10, r10, #256
+                /*
+                 * Bump to the next 256-byte boundary with the size of
+                 * the relocation code added. This avoids overwriting
+                 * ourself when the offset is small.
+                 */
+                add     r10, r10, #((reloc_code_end - restart + 256) & ~255)
                 bic     r10, r10, #255
 
+                /* Get start of code we want to copy and align it down. */
+                adr     r5, restart
+                bic     r5, r5, #31
+
                 sub     r9, r6, r5              @ size to copy
                 add     r9, r9, #31             @ rounded up to a multiple
                 bic     r9, r9, #31             @ ... of 32 bytes
@@ -245,6 +253,11 @@ restart:	adr	r0, LC0
                 /* Preserve offset to relocated code. */
                 sub     r6, r9, r6
 
+#ifndef CONFIG_ZBOOT_ROM
+                /* cache_clean_flush may use the stack, so relocate it */
+                add     sp, sp, r6
+#endif
+
                 bl      cache_clean_flush
 
                 adr     r0, BSYM(restart)
@@ -333,7 +346,6 @@ not_relocated:	mov	r0, #0
 LC0:            .word   LC0                     @ r1
                 .word   __bss_start             @ r2
                 .word   _end                    @ r3
-                .word   _start                  @ r5
                 .word   _edata                  @ r6
                 .word   _image_size             @ r9
                 .word   _got_start              @ r11
@@ -1062,6 +1074,7 @@ memdump:	mov	r12, r0
 #endif
 
                 .ltorg
+reloc_code_end:
 
                 .align
                 .section ".stack", "aw", %nobits
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 5309909d7282..ea80abe78844 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -54,6 +54,7 @@ SECTIONS
   .bss                  : { *(.bss) }
   _end = .;
 
+  . = ALIGN(8);         /* the stack must be 64-bit aligned */
   .stack                : { *(.stack) }
 
   .stab 0               : { *(.stab) }
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 885be097769d..832888d0c20c 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -159,7 +159,7 @@ extern unsigned int user_debug;
 #include <mach/barriers.h>
 #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
 #define mb()            do { dsb(); outer_sync(); } while (0)
-#define rmb()           dmb()
+#define rmb()           dsb()
 #define wmb()           mb()
 #else
 #include <asm/memory.h>
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index cb8398317644..0340224cf73c 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -597,19 +597,13 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
         return err;
 }
 
-static inline void setup_syscall_restart(struct pt_regs *regs)
-{
-        regs->ARM_r0 = regs->ARM_ORIG_r0;
-        regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
-}
-
 /*
  * OK, we're invoking a handler
  */     
 static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
               siginfo_t *info, sigset_t *oldset,
-              struct pt_regs * regs, int syscall)
+              struct pt_regs * regs)
 {
         struct thread_info *thread = current_thread_info();
         struct task_struct *tsk = current;
@@ -617,26 +611,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
         int ret;
 
         /*
-         * If we were from a system call, check for system call restarting...
-         */
-        if (syscall) {
-                switch (regs->ARM_r0) {
-                case -ERESTART_RESTARTBLOCK:
-                case -ERESTARTNOHAND:
-                        regs->ARM_r0 = -EINTR;
-                        break;
-                case -ERESTARTSYS:
-                        if (!(ka->sa.sa_flags & SA_RESTART)) {
-                                regs->ARM_r0 = -EINTR;
-                                break;
-                        }
-                        /* fallthrough */
-                case -ERESTARTNOINTR:
-                        setup_syscall_restart(regs);
-                }
-        }
-
-        /*
          * translate the signal
          */
         if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap)
@@ -685,6 +659,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
  */
 static void do_signal(struct pt_regs *regs, int syscall)
 {
+        unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
         struct k_sigaction ka;
         siginfo_t info;
         int signr;
@@ -698,18 +673,61 @@ static void do_signal(struct pt_regs *regs, int syscall)
         if (!user_mode(regs))
                 return;
 
+        /*
+         * If we were from a system call, check for system call restarting...
+         */
+        if (syscall) {
+                continue_addr = regs->ARM_pc;
+                restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4);
+                retval = regs->ARM_r0;
+
+                /*
+                 * Prepare for system call restart.  We do this here so that a
+                 * debugger will see the already changed PSW.
+                 */
+                switch (retval) {
+                case -ERESTARTNOHAND:
+                case -ERESTARTSYS:
+                case -ERESTARTNOINTR:
+                        regs->ARM_r0 = regs->ARM_ORIG_r0;
+                        regs->ARM_pc = restart_addr;
+                        break;
+                case -ERESTART_RESTARTBLOCK:
+                        regs->ARM_r0 = -EINTR;
+                        break;
+                }
+        }
+
         if (try_to_freeze())
                 goto no_signal;
 
+        /*
+         * Get the signal to deliver.  When running under ptrace, at this
+         * point the debugger may change all our registers ...
+         */
         signr = get_signal_to_deliver(&info, &ka, regs, NULL);
         if (signr > 0) {
                 sigset_t *oldset;
 
+                /*
+                 * Depending on the signal settings we may need to revert the
+                 * decision to restart the system call.  But skip this if a
+                 * debugger has chosen to restart at a different PC.
+                 */
+                if (regs->ARM_pc == restart_addr) {
+                        if (retval == -ERESTARTNOHAND
+                            || (retval == -ERESTARTSYS
+                                && !(ka.sa.sa_flags & SA_RESTART))) {
+                                regs->ARM_r0 = -EINTR;
+                                regs->ARM_pc = continue_addr;
+                        }
+                }
+
                 if (test_thread_flag(TIF_RESTORE_SIGMASK))
                         oldset = &current->saved_sigmask;
                 else
                         oldset = &current->blocked;
-                if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+                if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
                         /*
                          * A signal was successfully delivered; the saved
                          * sigmask will have been stored in the signal frame,
@@ -723,11 +741,14 @@ static void do_signal(struct pt_regs *regs, int syscall)
         }
 
  no_signal:
-        /*
-         * No signal to deliver to the process - restart the syscall.
-         */
         if (syscall) {
-                if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
+                /*
+                 * Handle restarting a different system call.  As above,
+                 * if a debugger has chosen to restart at a different PC,
+                 * ignore the restart.
+                 */
+                if (retval == -ERESTART_RESTARTBLOCK
+                    && regs->ARM_pc == continue_addr) {
                         if (thumb_mode(regs)) {
                                 regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
                                 regs->ARM_pc -= 2;
@@ -750,11 +771,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
 #endif
                         }
                 }
-                if (regs->ARM_r0 == -ERESTARTNOHAND ||
-                    regs->ARM_r0 == -ERESTARTSYS ||
-                    regs->ARM_r0 == -ERESTARTNOINTR) {
-                        setup_syscall_restart(regs);
-                }
 
                 /* If there's no signal to deliver, we just put the saved sigmask
                  * back.
diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h
index 0c5d749d7b5f..9a732195aa1c 100644
--- a/arch/arm/mach-realview/include/mach/barriers.h
+++ b/arch/arm/mach-realview/include/mach/barriers.h
@@ -4,5 +4,5 @@
  * operation to deadlock the system.
  */
 #define mb()            dsb()
-#define rmb()           dmb()
+#define rmb()           dsb()
 #define wmb()           mb()
diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h
index cc115174899b..425b42e91ef6 100644
--- a/arch/arm/mach-tegra/include/mach/barriers.h
+++ b/arch/arm/mach-tegra/include/mach/barriers.h
@@ -23,7 +23,7 @@
 
 #include <asm/outercache.h>
 
-#define rmb()           dmb()
+#define rmb()           dsb()
 #define wmb()           do { dsb(); outer_sync(); } while (0)
 #define mb()            wmb()
 
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index e5f6fc428348..e591513bb53e 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -392,7 +392,7 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
          * Convert start_pfn/end_pfn to a struct page pointer.
          */
         start_pg = pfn_to_page(start_pfn - 1) + 1;
-        end_pg = pfn_to_page(end_pfn);
+        end_pg = pfn_to_page(end_pfn - 1) + 1;
 
         /*
          * Convert to physical addresses, and
@@ -426,6 +426,14 @@ static void __init free_unused_memmap(struct meminfo *mi)
 
                 bank_start = bank_pfn_start(bank);
 
+#ifdef CONFIG_SPARSEMEM
+                /*
+                 * Take care not to free memmap entries that don't exist
+                 * due to SPARSEMEM sections which aren't present.
+                 */
+                bank_start = min(bank_start,
+                                 ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
                 /*
                  * If we had a previous bank, and there is a space
                  * between the current bank and the previous, free it.
@@ -440,6 +448,12 @@ static void __init free_unused_memmap(struct meminfo *mi)
                  */
                 prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
         }
+
+#ifdef CONFIG_SPARSEMEM
+        if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
+                free_memmap(prev_bank_end,
+                            ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
 }
 
 static void __init free_highpages(void)