OMAP3: PM: fix IO daisy chain enable to use PM_WKEN reg

Checking to se if the IO daisy chain is enabled should be checking the
PM_WKEN register, not the PM_WKST register.  Reading PM_WKST tells us
if an event occurred, not whether or not it is enabled.

Apparently, we've been lucky until now in that a pending event has not
been there during enable.  However, on 3630/Zoom3, I noticed because
of the WARN that this timeout was always happening.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 2 insertions, 2 deletions

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 2e967716cc3f..b88737fd6cfe 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -99,7 +99,7 @@ static void omap3_enable_io_chain(void)
                 /* Do a readback to assure write has been done */
                 prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 
-                while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+                while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
                          OMAP3430_ST_IO_CHAIN_MASK)) {
                         timeout++;
                         if (timeout > 1000) {
@@ -108,7 +108,7 @@ static void omap3_enable_io_chain(void)
                                 return;
                         }
                         prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
-                                             WKUP_MOD, PM_WKST);
+                                             WKUP_MOD, PM_WKEN);
                 }
         }
 }