memblock: Introduce default allocation limit and use it to replace explicit ones

This introduce memblock.current_limit which is used to limit allocations
from memblock_alloc() or memblock_alloc_base(..., MEMBLOCK_ALLOC_ACCESSIBLE).

The old MEMBLOCK_ALLOC_ANYWHERE changes value from 0 to ~(u64)0 and can still
be used with memblock_alloc_base() to allocate really anywhere.

It is -no-longer- cropped to MEMBLOCK_REAL_LIMIT which disappears.

Note to archs: I'm leaving the default limit to MEMBLOCK_ALLOC_ANYWHERE. I
strongly recommend that you ensure that you set an appropriate limit
during boot in order to guarantee that an memblock_alloc() at any time
results in something that is accessible with a simple __va().

The reason is that a subsequent patch will introduce the ability for
the array to resize itself by reallocating itself. The MEMBLOCK core will
honor the current limit when performing those allocations.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

12 files changed, 37 insertions, 44 deletions

diff --git a/arch/microblaze/include/asm/memblock.h b/arch/microblaze/include/asm/memblock.h
index f9c2fa331d2a..20a8e257c77f 100644
--- a/arch/microblaze/include/asm/memblock.h
+++ b/arch/microblaze/include/asm/memblock.h
@@ -9,9 +9,6 @@
 #ifndef _ASM_MICROBLAZE_MEMBLOCK_H
 #define _ASM_MICROBLAZE_MEMBLOCK_H
 
-/* MEMBLOCK limit is OFF */
-#define MEMBLOCK_REAL_LIMIT     0xFFFFFFFF
-
 #endif /* _ASM_MICROBLAZE_MEMBLOCK_H */
 
 
diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h
index 3c29728b56b1..43efc345065e 100644
--- a/arch/powerpc/include/asm/memblock.h
+++ b/arch/powerpc/include/asm/memblock.h
@@ -5,11 +5,4 @@
 
 #define MEMBLOCK_DBG(fmt...) udbg_printf(fmt)
 
-#ifdef CONFIG_PPC32
-extern phys_addr_t lowmem_end_addr;
-#define MEMBLOCK_REAL_LIMIT     lowmem_end_addr
-#else
-#define MEMBLOCK_REAL_LIMIT     0
-#endif
-
 #endif /* _ASM_POWERPC_MEMBLOCK_H */
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index fed9bf6187d1..3aec0b980f6a 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -98,7 +98,7 @@ static void __init move_device_tree(void)
 
         if ((memory_limit && (start + size) > memory_limit) ||
                         overlaps_crashkernel(start, size)) {
-                p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size));
+                p = __va(memblock_alloc(size, PAGE_SIZE));
                 memcpy(p, initial_boot_params, size);
                 initial_boot_params = (struct boot_param_header *)p;
                 DBG("Moved device tree to 0x%p\n", p);
@@ -655,6 +655,21 @@ static void __init phyp_dump_reserve_mem(void)
 static inline void __init phyp_dump_reserve_mem(void) {}
 #endif /* CONFIG_PHYP_DUMP  && CONFIG_PPC_RTAS */
 
+static void set_boot_memory_limit(void)
+{
+#ifdef CONFIG_PPC32
+        /* 601 can only access 16MB at the moment */
+        if (PVR_VER(mfspr(SPRN_PVR)) == 1)
+                memblock_set_current_limit(0x01000000);
+        /* 8xx can only access 8MB at the moment */
+        else if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
+                memblock_set_current_limit(0x00800000);
+        else
+                memblock_set_current_limit(0x10000000);
+#else
+        memblock_set_current_limit(memblock.rmo_size);
+#endif
+}
 
 void __init early_init_devtree(void *params)
 {
@@ -683,6 +698,7 @@ void __init early_init_devtree(void *params)
 
         /* Scan memory nodes and rebuild MEMBLOCKs */
         memblock_init();
+
         of_scan_flat_dt(early_init_dt_scan_root, NULL);
         of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
 
@@ -718,6 +734,8 @@ void __init early_init_devtree(void *params)
 
         DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
 
+        set_boot_memory_limit();
+
         /* We may need to relocate the flat tree, do it now.
          * FIXME .. and the initrd too? */
         move_device_tree();
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index a10ffc85ada7..b7eb1ded3b5f 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -246,7 +246,7 @@ static void __init irqstack_early_init(void)
         unsigned int i;
 
         /* interrupt stacks must be in lowmem, we get that for free on ppc32
-         * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
+         * as the memblock is limited to lowmem by default */
         for_each_possible_cpu(i) {
                 softirq_ctx[i] = (struct thread_info *)
                         __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 1dc2fa5ce1bd..58969b51f454 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -35,6 +35,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/highmem.h>
+#include <linux/memblock.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -47,6 +48,7 @@
 #include <asm/bootx.h>
 #include <asm/machdep.h>
 #include <asm/setup.h>
+
 #include "mmu_decl.h"
 
 extern int __map_without_ltlbs;
@@ -139,8 +141,7 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
          * coverage with normal-sized pages (or other reasons) do not
          * attempt to allocate outside the allowed range.
          */
-
-        __initial_memory_limit_addr = memstart_addr + mapped;
+        memblock_set_current_limit(memstart_addr + mapped);
 
         return mapped;
 }
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index cdc7526e9c93..e525f862d759 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -40,6 +40,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/highmem.h>
+#include <linux/memblock.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -212,5 +213,5 @@ void __init adjust_total_lowmem(void)
         pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20,
                 (unsigned int)((total_lowmem - __max_low_memory) >> 20));
 
-        __initial_memory_limit_addr = memstart_addr + __max_low_memory;
+        memblock_set_current_limit(memstart_addr + __max_low_memory);
 }
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index a542ff5ec8a9..b05890e23813 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -696,7 +696,8 @@ static void __init htab_initialize(void)
 #endif /* CONFIG_U3_DART */
                 BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
                                 prot, mmu_linear_psize, mmu_kernel_ssize));
-       }
+        }
+        memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE);
 
         /*
          * If we have a memory_limit and we've allocated TCEs then we need to
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 6a6975dc2654..59b208b7ec6f 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -92,12 +92,6 @@ int __allow_ioremap_reserved;
 unsigned long __max_low_memory = MAX_LOW_MEM;
 
 /*
- * address of the limit of what is accessible with initial MMU setup -
- * 256MB usually, but only 16MB on 601.
- */
-phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000;
-
-/*
  * Check for command-line options that affect what MMU_init will do.
  */
 void MMU_setup(void)
@@ -126,13 +120,6 @@ void __init MMU_init(void)
         if (ppc_md.progress)
                 ppc_md.progress("MMU:enter", 0x111);
 
-        /* 601 can only access 16MB at the moment */
-        if (PVR_VER(mfspr(SPRN_PVR)) == 1)
-                __initial_memory_limit_addr = 0x01000000;
-        /* 8xx can only access 8MB at the moment */
-        if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
-                __initial_memory_limit_addr = 0x00800000;
-
         /* parse args from command line */
         MMU_setup();
 
@@ -190,20 +177,18 @@ void __init MMU_init(void)
 #ifdef CONFIG_BOOTX_TEXT
         btext_unmap();
 #endif
+
+        /* Shortly after that, the entire linear mapping will be available */
+        memblock_set_current_limit(lowmem_end_addr);
 }
 
 /* This is only called until mem_init is done. */
 void __init *early_get_page(void)
 {
-        void *p;
-
-        if (init_bootmem_done) {
-                p = alloc_bootmem_pages(PAGE_SIZE);
-        } else {
-                p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
-                                        __initial_memory_limit_addr));
-        }
-        return p;
+        if (init_bootmem_done)
+                return alloc_bootmem_pages(PAGE_SIZE);
+        else
+                return __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE));
 }
 
 /* Free up now-unused memory */
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index f8a01829d64f..7d34e170e80f 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -223,8 +223,7 @@ void __init MMU_init_hw(void)
          * Find some memory for the hash table.
          */
         if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
-        Hash = __va(memblock_alloc_base(Hash_size, Hash_size,
-                                   __initial_memory_limit_addr));
+        Hash = __va(memblock_alloc(Hash_size, Hash_size));
         cacheable_memzero(Hash, Hash_size);
         _SDR1 = __pa(Hash) | SDR1_LOW_BITS;
 
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index d8695b02a968..7ba32e762990 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -432,6 +432,8 @@ static void __early_init_mmu(int boot_cpu)
          * the MMU configuration
          */
         mb();
+
+        memblock_set_current_limit(linear_map_top);
 }
 
 void __init early_init_mmu(void)
diff --git a/arch/sh/include/asm/memblock.h b/arch/sh/include/asm/memblock.h
index dfe683b88075..e87063fad2ea 100644
--- a/arch/sh/include/asm/memblock.h
+++ b/arch/sh/include/asm/memblock.h
@@ -1,6 +1,4 @@
 #ifndef __ASM_SH_MEMBLOCK_H
 #define __ASM_SH_MEMBLOCK_H
 
-#define MEMBLOCK_REAL_LIMIT     0
-
 #endif /* __ASM_SH_MEMBLOCK_H */
diff --git a/arch/sparc/include/asm/memblock.h b/arch/sparc/include/asm/memblock.h
index f12af880649b..c67b047ef85e 100644
--- a/arch/sparc/include/asm/memblock.h
+++ b/arch/sparc/include/asm/memblock.h
@@ -5,6 +5,4 @@
 
 #define MEMBLOCK_DBG(fmt...) prom_printf(fmt)
 
-#define MEMBLOCK_REAL_LIMIT     0
-
 #endif /* !(_SPARC64_MEMBLOCK_H) */