[ARM] pxa/spitz: convert to use new GPIO API

Original patch from Dmitry Baryshkov's initial scoop gpio conversion
work at http://git.infradead.org/users/dbaryshkov/zaurus-2.6.git.

Separated into this dedicated generic GPIO conversion patch for the
work of deprecating pxa_gpio_mode().

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 35 insertions, 7 deletions

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index b569f3b4cf3a..fef5018d547d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -19,6 +19,7 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/pm.h>
 #include <linux/backlight.h>
@@ -371,17 +372,36 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo
         pxa_gpio_mode(GPIO109_MMCDAT1_MD);
         pxa_gpio_mode(GPIO110_MMCDAT2_MD);
         pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-        pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN);
-        pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN);
+
+        err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
+        if (err)
+                goto err_out;
+
+        err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
+        if (err)
+                goto err_free_1;
+
+        gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
+        gpio_direction_input(SPITZ_GPIO_nSD_WP);
 
         spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
         err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
-                          IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                          IRQF_DISABLED | IRQF_TRIGGER_RISING |
+                          IRQF_TRIGGER_FALLING,
                           "MMC card detect", data);
-        if (err)
-                printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+        if (err) {
+                pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+                                __func__);
+                goto err_free_2;
+        }
+        return 0;
 
+err_free_2:
+        gpio_free(SPITZ_GPIO_nSD_WP);
+err_free_1:
+        gpio_free(SPITZ_GPIO_nSD_DETECT);
+err_out:
         return err;
 }
 
@@ -397,12 +417,14 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 
 static int spitz_mci_get_ro(struct device *dev)
 {
-        return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP);
+        return gpio_get_value(SPITZ_GPIO_nSD_WP);
 }
 
 static void spitz_mci_exit(struct device *dev, void *data)
 {
         free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
+        gpio_free(SPITZ_GPIO_nSD_WP);
+        gpio_free(SPITZ_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
@@ -419,6 +441,12 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
  */
 static int spitz_ohci_init(struct device *dev)
 {
+        int err;
+
+        err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
+        if (err)
+                return err;
+
         /* Only Port 2 is connected */
         pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN);
         pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT);
@@ -427,7 +455,7 @@ static int spitz_ohci_init(struct device *dev)
         /* Setup USB Port 2 Output Control Register */
         UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 
-        GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST);
+        gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 
         UHCHR = (UHCHR) &
                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);