Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ata: add CFA specific identify data words
  remove stale comment from <linux/hdreg.h>
  AT91: initialize Compact Flash on AT91SAM9263 cpu
  ide: add at91_ide driver
  ide: allow to wrap interrupt handler
  ide-iops: fix odd-length ATAPI PIO transfers
  ide: NULL noise: drivers/ide/ide-*.c
  ide: expiry() returns int, negative expiry() return values won't be noticed

2 files changed, 108 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 134af97ff340..b7f233242315 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+        [0] = {
+                .start  = AT91_CHIPSELECT_4,
+                .end    = AT91_CHIPSELECT_4 + SZ_256M - 1,
+                .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+        }
+};
+
+static struct platform_device cf0_device = {
+        .id             = 0,
+        .dev            = {
+                                .platform_data  = &cf0_data,
+        },
+        .resource       = cf0_resources,
+        .num_resources  = ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+        [0] = {
+                .start  = AT91_CHIPSELECT_5,
+                .end    = AT91_CHIPSELECT_5 + SZ_256M - 1,
+                .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+        }
+};
+
+static struct platform_device cf1_device = {
+        .id             = 1,
+        .dev            = {
+                                .platform_data  = &cf1_data,
+        },
+        .resource       = cf1_resources,
+        .num_resources  = ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+        unsigned long ebi0_csa;
+        struct platform_device *pdev;
+
+        if (!data)
+                return;
+
+        /*
+         * assign CS4 or CS5 to SMC with Compact Flash logic support,
+         * we assume SMC timings are configured by board code,
+         * except True IDE where timings are controlled by driver
+         */
+        ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+        switch (data->chipselect) {
+        case 4:
+                at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
+                ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+                cf0_data = *data;
+                pdev = &cf0_device;
+                break;
+        case 5:
+                at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
+                ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+                cf1_data = *data;
+                pdev = &cf1_device;
+                break;
+        default:
+                printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+                       data->chipselect);
+                return;
+        }
+        at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+        if (data->det_pin) {
+                at91_set_gpio_input(data->det_pin, 1);
+                at91_set_deglitch(data->det_pin, 1);
+        }
+
+        if (data->irq_pin) {
+                at91_set_gpio_input(data->irq_pin, 1);
+                at91_set_deglitch(data->irq_pin, 1);
+        }
+
+        if (data->vcc_pin)
+                /* initially off */
+                at91_set_gpio_output(data->vcc_pin, 0);
+
+        /* enable EBI controlled pins */
+        at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
+        at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
+        at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
+        at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+        pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+        platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 0b3ae21b4565..793fe7b25f36 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -56,6 +56,9 @@ struct at91_cf_data {
         u8      vcc_pin;                /* power switching */
         u8      rst_pin;                /* card reset */
         u8      chipselect;             /* EBI Chip Select number */
+        u8      flags;
+#define AT91_CF_TRUE_IDE        0x01
+#define AT91_IDE_SWAP_A0_A2     0x02
 };
 extern void __init at91_add_device_cf(struct at91_cf_data *data);