PCI: use dev_printk in x86 quirk messages

Convert quirk printks to dev_printk().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 34 insertions, 31 deletions

diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 150ba29a0d33..3cd7a2dcd4fe 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -30,8 +30,8 @@ static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
         raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
 
         if (!(word & (1 << 13))) {
-                printk(KERN_INFO "Intel E7520/7320/7525 detected. "
-                        "Disabling irq balancing and affinity\n");
+                dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
+                        "disabling irq balancing and affinity\n");
 #ifdef CONFIG_IRQBALANCE
                 irqbalance_disable("");
 #endif
@@ -104,14 +104,16 @@ static void ich_force_enable_hpet(struct pci_dev *dev)
         pci_read_config_dword(dev, 0xF0, &rcba);
         rcba &= 0xFFFFC000;
         if (rcba == 0) {
-                printk(KERN_DEBUG "RCBA disabled. Cannot force enable HPET\n");
+                dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
+                        "cannot force enable HPET\n");
                 return;
         }
 
         /* use bits 31:14, 16 kB aligned */
         rcba_base = ioremap_nocache(rcba, 0x4000);
         if (rcba_base == NULL) {
-                printk(KERN_DEBUG "ioremap failed. Cannot force enable HPET\n");
+                dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
+                        "cannot force enable HPET\n");
                 return;
         }
 
@@ -122,8 +124,8 @@ static void ich_force_enable_hpet(struct pci_dev *dev)
                 /* HPET is enabled in HPTC. Just not reported by BIOS */
                 val = val & 0x3;
                 force_hpet_address = 0xFED00000 | (val << 12);
-                printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
-                               force_hpet_address);
+                dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+                        "0x%lx\n", force_hpet_address);
                 iounmap(rcba_base);
                 return;
         }
@@ -142,11 +144,12 @@ static void ich_force_enable_hpet(struct pci_dev *dev)
         if (err) {
                 force_hpet_address = 0;
                 iounmap(rcba_base);
-                printk(KERN_DEBUG "Failed to force enable HPET\n");
+                dev_printk(KERN_DEBUG, &dev->dev,
+                        "Failed to force enable HPET\n");
         } else {
                 force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
-                printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
-                               force_hpet_address);
+                dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+                        "0x%lx\n", force_hpet_address);
         }
 }
 
@@ -208,8 +211,8 @@ static void old_ich_force_enable_hpet(struct pci_dev *dev)
         if (val & 0x4) {
                 val &= 0x3;
                 force_hpet_address = 0xFED00000 | (val << 12);
-                printk(KERN_DEBUG "HPET at base address 0x%lx\n",
-                               force_hpet_address);
+                dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+                        force_hpet_address);
                 return;
         }
 
@@ -229,14 +232,14 @@ static void old_ich_force_enable_hpet(struct pci_dev *dev)
                 /* HPET is enabled in HPTC. Just not reported by BIOS */
                 val &= 0x3;
                 force_hpet_address = 0xFED00000 | (val << 12);
-                printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
-                               force_hpet_address);
+                dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+                        "0x%lx\n", force_hpet_address);
                 cached_dev = dev;
                 force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
                 return;
         }
 
-        printk(KERN_DEBUG "Failed to force enable HPET\n");
+        dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
 }
 
 /*
@@ -294,8 +297,8 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev)
          */
         if (val & 0x80) {
                 force_hpet_address = (val & ~0x3ff);
-                printk(KERN_DEBUG "HPET at base address 0x%lx\n",
-                               force_hpet_address);
+                dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+                        force_hpet_address);
                 return;
         }
 
@@ -309,14 +312,14 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev)
         pci_read_config_dword(dev, 0x68, &val);
         if (val & 0x80) {
                 force_hpet_address = (val & ~0x3ff);
-                printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
-                               force_hpet_address);
+                dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+                        "0x%lx\n", force_hpet_address);
                 cached_dev = dev;
                 force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
                 return;
         }
 
-        printk(KERN_DEBUG "Failed to force enable HPET\n");
+        dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
@@ -344,7 +347,7 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev)
         pci_read_config_dword(dev, 0x44, &val);
         force_hpet_address = val & 0xfffffffe;
         force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
-        printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
+        dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
                 force_hpet_address);
         cached_dev = dev;
         return;
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index cb63007e20b2..74d30ff33c49 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -17,7 +17,7 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
         int pxb, reg;
         u8 busno, suba, subb;
 
-        printk(KERN_WARNING "PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+        dev_warn(&d->dev, "Searching for i450NX host bridges\n");
         reg = 0xd0;
         for(pxb = 0; pxb < 2; pxb++) {
                 pci_read_config_byte(d, reg++, &busno);
@@ -41,7 +41,7 @@ static void __devinit pci_fixup_i450gx(struct pci_dev *d)
          */
         u8 busno;
         pci_read_config_byte(d, 0x4a, &busno);
-        printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno);
+        dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno);
         pci_scan_bus_with_sysdata(busno);
         pcibios_last_bus = -1;
 }
@@ -55,7 +55,7 @@ static void __devinit  pci_fixup_umc_ide(struct pci_dev *d)
          */
         int i;
 
-        printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", pci_name(d));
+        dev_warn(&d->dev, "Fixing base address flags\n");
         for(i = 0; i < 4; i++)
                 d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
 }
@@ -68,7 +68,7 @@ static void __devinit  pci_fixup_ncr53c810(struct pci_dev *d)
          * Fix class to be PCI_CLASS_STORAGE_SCSI
          */
         if (!d->class) {
-                printk(KERN_WARNING "PCI: fixing NCR 53C810 class code for %s\n", pci_name(d));
+                dev_warn(&d->dev, "Fixing NCR 53C810 class code\n");
                 d->class = PCI_CLASS_STORAGE_SCSI << 8;
         }
 }
@@ -80,7 +80,7 @@ static void __devinit  pci_fixup_latency(struct pci_dev *d)
          *  SiS 5597 and 5598 chipsets require latency timer set to
          *  at most 32 to avoid lockups.
          */
-        DBG("PCI: Setting max latency to 32\n");
+        dev_dbg(&d->dev, "Setting max latency to 32\n");
         pcibios_max_latency = 32;
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
@@ -138,7 +138,7 @@ static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
 
         pci_read_config_byte(d, where, &v);
         if (v & ~mask) {
-                printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
+                dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
                         d->device, d->revision, where, v, mask, v & mask);
                 v &= mask;
                 pci_write_config_byte(d, where, v);
@@ -200,7 +200,7 @@ static void pci_fixup_nforce2(struct pci_dev *dev)
          * Apply fixup if needed, but don't touch disconnect state
          */
         if ((val & 0x00FF0000) != 0x00010000) {
-                printk(KERN_WARNING "PCI: nForce2 C1 Halt Disconnect fixup\n");
+                dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n");
                 pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000);
         }
 }
@@ -348,7 +348,7 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev)
         pci_read_config_word(pdev, PCI_COMMAND, &config);
         if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
                 pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
-                printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
+                dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
         }
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
@@ -388,11 +388,11 @@ static void __devinit pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev)
                 /* verify the change for status output */
                 pci_read_config_byte(dev, 0x50, &val);
                 if (val & 0x40)
-                        printk(KERN_INFO "PCI: Detected MSI K8T Neo2-FIR, "
+                        dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
                                         "can't enable onboard soundcard!\n");
                 else
-                        printk(KERN_INFO "PCI: Detected MSI K8T Neo2-FIR, "
-                                        "enabled onboard soundcard.\n");
+                        dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
+                                        "enabled onboard soundcard\n");
         }
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,