trivial: fix typos/grammar errors in Kconfig texts

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

13 files changed, 22 insertions, 22 deletions

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 3f325d3718a9..cd8de89c5fad 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -109,7 +109,7 @@ config MACH_OMAP_PALMZ71
         help
          Support for the Palm Zire71 PDA. To boot the kernel,
          you'll need a PalmOS compatible bootloader; check out
-         http://hackndev.com/palm/z71 for more informations.
+         http://hackndev.com/palm/z71 for more information.
          Say Y here if you have such a PDA, say N otherwise.
 
 config MACH_OMAP_PALMTT
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 05fe3053dcae..414a8ad97f52 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -127,13 +127,13 @@ config BOARD_HAMMERHEAD
         select CPU_AT32AP7000
         select USB_ARCH_HAS_HCD
         help
-          The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel.
+          The Hammerhead platform is built around an AVR32 32-bit microcontroller from Atmel.
           It offers versatile peripherals, such as ethernet, usb device, usb host etc.
 
-          The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered
+          The board also incorporates a power supply and is a Power over Ethernet (PoE) Powered
           Device (PD).
 
-          Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is
+          Additionally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is
           mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which
           will cover even the most exceptional need of memory bandwidth. Together with the onboard
           video decoder the board is ready for video processing.
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 0c1f86e3e44a..3640cdc38aac 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -777,7 +777,7 @@ config CACHELINE_ALIGNED_L1
         default n if BF54x
         depends on !BF531
         help
-          If enabled, cacheline_anligned data is linked
+          If enabled, cacheline_aligned data is linked
           into L1 data memory. (less latency)
 
 config SYSCALL_TAB_L1
@@ -957,7 +957,7 @@ config MPU
           memory they do not own.  This comes at a performance penalty
           and is recommended only for debugging.
 
-comment "Asynchonous Memory Configuration"
+comment "Asynchronous Memory Configuration"
 
 menu "EBIU_AMGCTL Global Control"
 config C_AMCKEN
@@ -989,7 +989,7 @@ config C_B3PEN
         default n
 
 choice
-        prompt"Enable Asynchonous Memory Banks"
+        prompt "Enable Asynchronous Memory Banks"
         default C_AMBEN_ALL
 
 config C_AMBEN
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 3462245fe9fb..7adac388a771 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -438,7 +438,7 @@ config ETRAX_SERIAL_PORT0_DMA1_IN
         help
           Enables the DMA1 input channel for ser0 (ttyS0).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want to use DMA, unless you use the DMA channel for
           something else.
 
@@ -565,7 +565,7 @@ config ETRAX_SERIAL_PORT2_DMA7_IN
         help
           Enables the DMA7 input channel for ser2 (ttyS2).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want to use DMA, unless you use the DMA channel for
           something else.
 
@@ -604,7 +604,7 @@ config ETRAX_SERIAL_PORT3_DMA3_IN
         help
           Enables the DMA3 input channel for ser3 (ttyS3).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want to use DMA, unless you use the DMA channel for
           something else.
 
diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig
index 005ed2b3f7f4..21bbd93be34f 100644
--- a/arch/cris/arch-v32/Kconfig
+++ b/arch/cris/arch-v32/Kconfig
@@ -28,7 +28,7 @@ config	ETRAX_NBR_LED_GRP_ONE
         help
           Select this if you want one Ethernet LED group. This LED group
           can be used for one or more Ethernet interfaces. However, it is
-          recomended that each Ethernet interface use a dedicated LED group.
+          recommended that each Ethernet interface use a dedicated LED group.
 
 config  ETRAX_NBR_LED_GRP_TWO
         bool "Use two LED groups"
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 7a64fcef9d07..b9e328e688be 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -342,7 +342,7 @@ config ETRAX_SERIAL_PORT4_DMA9_IN
         help
           Enables the DMA9 input channel for ser4 (ttyS4).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want to use DMA, unless you use the DMA channel for
           something else.
 
diff --git a/arch/cris/arch-v32/mach-fs/Kconfig b/arch/cris/arch-v32/mach-fs/Kconfig
index f6d74475f1c6..774de82abef6 100644
--- a/arch/cris/arch-v32/mach-fs/Kconfig
+++ b/arch/cris/arch-v32/mach-fs/Kconfig
@@ -59,7 +59,7 @@ config ETRAX_SDRAM_GRP1_CONFIG
         depends on ETRAX_ARCH_V32
         default "0"
         help
-          SDRAM configuration for group 1. The defult value is 0
+          SDRAM configuration for group 1. The default value is 0
           because group 1 is not used in the default configuration,
           described in the help for SDRAM_GRP0_CONFIG.
 
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 206cb7953b0c..92508c521673 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -136,7 +136,7 @@ config MACH_JAZZ
         help
          This a family of machines based on the MIPS R4030 chipset which was
          used by several vendors to build RISC/os and Windows NT workstations.
-         Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+         Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
          Olivetti M700-10 workstations.
 
 config LASAT
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 74cc312c347c..2e2160c3de7c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -342,7 +342,7 @@ config PHYP_DUMP
         help
           Hypervisor-assisted dump is meant to be a kdump replacement
           offering robustness and speed not possible without system
-          hypervisor assistence.
+          hypervisor assistance.
 
           If unsure, say "N"
 
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 200b9cb900ea..9a8bb53d315d 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -298,7 +298,7 @@ config CPM
 config OF_RTC
         bool
         help
-          Uses information from the OF or flattened device tree to instatiate
+          Uses information from the OF or flattened device tree to instantiate
           platform devices for direct mapped RTC chips like the DS1742 or DS1743.
 
 source "arch/powerpc/sysdev/bestcomm/Kconfig"
diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig
index 0b192a1c429d..29e427085efb 100644
--- a/arch/powerpc/sysdev/bestcomm/Kconfig
+++ b/arch/powerpc/sysdev/bestcomm/Kconfig
@@ -9,8 +9,8 @@ config PPC_BESTCOMM
         select PPC_LIB_RHEAP
         help
           BestComm is the name of the communication coprocessor found
-          on the Freescale MPC5200 family of processor. It's usage is
-          optionnal for some drivers (like ATA), but required for
+          on the Freescale MPC5200 family of processor.  Its usage is
+          optional for some drivers (like ATA), but required for
           others (like FEC).
 
           If you want to use drivers that require DMA operations,
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8d50d527c595..2d52b515c241 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -640,10 +640,10 @@ config GUSA_RB
         depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
         help
           Enabling this option will allow the kernel to implement some
-          atomic operations using a software implemention of load-locked/
+          atomic operations using a software implementation of load-locked/
           store-conditional (LLSC). On machines which do not have hardware
           LLSC, this should be more efficient than the other alternative of
-          disabling insterrupts around the atomic sequence.
+          disabling interrupts around the atomic sequence.
 
 endmenu
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 06c02c00d7d9..d7b5621382f6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1129,7 +1129,7 @@ config NODES_SHIFT
         depends on NEED_MULTIPLE_NODES
         ---help---
           Specify the maximum number of NUMA Nodes available on the target
-          system.  Increases memory reserved to accomodate various tables.
+          system.  Increases memory reserved to accommodate various tables.
 
 config HAVE_ARCH_BOOTMEM
         def_bool y
@@ -1307,7 +1307,7 @@ config MTRR_SANITIZER
           add writeback entries.
 
           Can be disabled with disable_mtrr_cleanup on the kernel command line.
-          The largest mtrr entry size for a continous block can be set with
+          The largest mtrr entry size for a continuous block can be set with
           mtrr_chunk_size.
 
           If unsure, say Y.