Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c changes from Wolfram Sang:

 - an arbitration driver.  While the driver is quite simple, it caused
   discussion if we need additional arbitration on top of the one
   specified in the I2C standard.  Conclusion is that I accept a few
   generic mechanisms, but not very specific ones.

 - the core lost the detach_adapter() call.  It has no users anymore and
   was in the way for other cleanups.  attach_adapter() is sadly still
   there since there are users waiting to be converted.

 - the core gained a bus recovery infrastructure.  I2C defines a way to
   recover if the data line is stalled.  This mechanism is now in the
   core and drivers can now pass some data to make use of it.

 - bigger driver cleanups for designware, s3c2410

 - removing superfluous refcounting from drivers

 - removing Ben Dooks as second maintainer due to inactivity.  Thanks
   for all your work so far, Ben!

 - bugfixes, feature additions, devicetree fixups, simplifications...

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: xiic: must always write 16-bit words to TX_FIFO
  i2c: octeon: use HZ in timeout value
  i2c: octeon: Fix i2c fail problem when a process is terminated by a signal
  i2c: designware-pci: drop superfluous {get|put}_device
  i2c: designware-plat: drop superfluous {get|put}_device
  i2c: davinci: drop superfluous {get|put}_device
  MAINTAINERS: Ben Dooks is inactive regarding I2C
  i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  i2c: at91: convert to dma_request_slave_channel_compat()
  i2c: mxs: do error checking and handling in PIO mode
  i2c: mxs: remove races in PIO code
  i2c-designware: switch to use runtime PM autosuspend
  i2c-designware: use usleep_range() in the busy-loop
  i2c-designware: enable/disable the controller properly
  i2c-designware: use dynamic adapter numbering on Lynxpoint
  i2c-designware-pci: use managed functions pcim_* and devm_*
  i2c-designware-pci: use dev_err() instead of printk()
  i2c-designware: move to managed functions (devm_*)
  i2c: remove CONFIG_HOTPLUG ifdefs
  i2c: s3c2410: Add SMBus emulation for block read
  ...

4 files changed, 0 insertions, 60 deletions

diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 1f9ba2ae5288..43f3ac5a1c7a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -56,7 +56,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 84deeab23ee7..9cf1ab17afeb 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -31,8 +31,6 @@
 #include <linux/pda_power.h>
 #include <linux/platform_data/tegra_usb.h>
 #include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/i2c-tegra.h>
 #include <linux/slab.h>
 #include <linux/sys_soc.h>
 #include <linux/usb/tegra_usb_phy.h>
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index f55d3f9b508d..8f456bed4fa0 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -63,7 +63,6 @@
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 #include <linux/platform_data/spi-s3c64xx.h>
diff --git a/arch/arm/plat-samsung/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h
deleted file mode 100644
index 2f7c17de8ac8..000000000000
--- a/arch/arm/plat-samsung/include/plat/regs-iic.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *              http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC     S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN            (1<<7)
-#define S3C2410_IICCON_TXDIV_16         (0<<6)
-#define S3C2410_IICCON_TXDIV_512        (1<<6)
-#define S3C2410_IICCON_IRQEN            (1<<5)
-#define S3C2410_IICCON_IRQPEND          (1<<4)
-#define S3C2410_IICCON_SCALE(x)         ((x)&15)
-#define S3C2410_IICCON_SCALEMASK        (0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX       (2<<6)
-#define S3C2410_IICSTAT_MASTER_TX       (3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX        (0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX        (1<<6)
-#define S3C2410_IICSTAT_MODEMASK        (3<<6)
-
-#define S3C2410_IICSTAT_START           (1<<5)
-#define S3C2410_IICSTAT_BUSBUSY         (1<<5)
-#define S3C2410_IICSTAT_TXRXEN          (1<<4)
-#define S3C2410_IICSTAT_ARBITR          (1<<3)
-#define S3C2410_IICSTAT_ASSLAVE         (1<<2)
-#define S3C2410_IICSTAT_ADDR0           (1<<1)
-#define S3C2410_IICSTAT_LASTBIT         (1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0        (0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5        (1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10       (2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15       (3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK    (3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON         (1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */