ARM: mxs: configure and register the second FEC device on TX28/STK5-V4

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 36 insertions, 6 deletions

diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
index fa0b154da67b..0fcff47009cf 100644
--- a/arch/arm/mach-mxs/module-tx28.c
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -45,7 +45,7 @@ static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
 };
 
 #define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec_pads[] __initconst = {
+static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
         MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
         MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
         MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
@@ -57,7 +57,20 @@ static const iomux_cfg_t tx28_fec_pads[] __initconst = {
         MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
 };
 
-static const struct fec_platform_data tx28_fec_data __initconst = {
+static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
+        MX28_PAD_ENET0_RXD2__ENET1_RXD0,
+        MX28_PAD_ENET0_RXD3__ENET1_RXD1,
+        MX28_PAD_ENET0_TXD2__ENET1_TXD0,
+        MX28_PAD_ENET0_TXD3__ENET1_TXD1,
+        MX28_PAD_ENET0_COL__ENET1_TX_EN,
+        MX28_PAD_ENET0_CRS__ENET1_RX_EN,
+};
+
+static struct fec_platform_data tx28_fec0_data = {
+        .phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static struct fec_platform_data tx28_fec1_data = {
         .phy = PHY_INTERFACE_MODE_RMII,
 };
 
@@ -108,15 +121,15 @@ int __init tx28_add_fec0(void)
         pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
         gpio_set_value(TX28_FEC_PHY_RESET, 1);
 
-        ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads,
-                        ARRAY_SIZE(tx28_fec_pads));
+        ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
+                        ARRAY_SIZE(tx28_fec0_pads));
         if (ret) {
                 pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
                                 __func__, ret);
                 goto free_gpios;
         }
-        pr_debug("%s: Registering FEC device\n", __func__);
-        mx28_add_fec(0, &tx28_fec_data);
+        pr_debug("%s: Registering FEC0 device\n", __func__);
+        mx28_add_fec(0, &tx28_fec0_data);
         return 0;
 
 free_gpios:
@@ -129,3 +142,19 @@ free_gpios:
 
         return ret;
 }
+
+int __init tx28_add_fec1(void)
+{
+        int ret;
+
+        ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
+                        ARRAY_SIZE(tx28_fec1_pads));
+        if (ret) {
+                pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
+                                __func__, ret);
+                return ret;
+        }
+        pr_debug("%s: Registering FEC1 device\n", __func__);
+        mx28_add_fec(1, &tx28_fec1_data);
+        return 0;
+}
diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h
index df9e1b6e81bf..8ed425457d30 100644
--- a/arch/arm/mach-mxs/module-tx28.h
+++ b/arch/arm/mach-mxs/module-tx28.h
@@ -7,3 +7,4 @@
  * Free Software Foundation.
  */
 int __init tx28_add_fec0(void);
+int __init tx28_add_fec1(void);