Merge branch 'for-rmk' of git://git.marvell.com/orion

4 files changed, 118 insertions, 6 deletions

diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 8bf4153d0840..3bf6304158f6 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/orion_spi.h>
@@ -53,6 +54,11 @@ static void __init rd88f6192_init(void)
          */
         kirkwood_init();
 
+        orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+        if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+            gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+                pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
         kirkwood_ehci_init();
         kirkwood_ge00_init(&rd88f6192_ge00_data);
         kirkwood_sata_init(&rd88f6192_sata_data);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index b31ca4cef365..8f159db4d08a 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
@@ -32,6 +33,7 @@
 
 #define DNS323_GPIO_LED_RIGHT_AMBER     1
 #define DNS323_GPIO_LED_LEFT_AMBER      2
+#define DNS323_GPIO_SYSTEM_UP           3
 #define DNS323_GPIO_LED_POWER           5
 #define DNS323_GPIO_OVERTEMP            6
 #define DNS323_GPIO_RTC                 7
@@ -239,7 +241,7 @@ static struct gpio_led dns323_leds[] = {
         {
                 .name = "power:blue",
                 .gpio = DNS323_GPIO_LED_POWER,
-                .active_low = 1,
+                .default_state = LEDS_GPIO_DEFSTATE_ON,
         }, {
                 .name = "right:amber",
                 .gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -334,7 +336,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
         {  0, MPP_UNUSED },
         {  1, MPP_GPIO },               /* right amber LED (sata ch0) */
         {  2, MPP_GPIO },               /* left amber LED (sata ch1) */
-        {  3, MPP_UNUSED },
+        {  3, MPP_GPIO },               /* system up flag */
         {  4, MPP_GPIO },               /* power button LED */
         {  5, MPP_GPIO },               /* power button LED */
         {  6, MPP_GPIO },               /* GMT G751-2f overtemp */
@@ -372,13 +374,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = {
         },
 };
 
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
 {
         pr_info("%s: triggering power-off...\n", __func__);
         gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 }
 
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+        pr_info("%s: triggering power-off...\n", __func__);
+        /* Pin has to be changed to 1 and back to 0 to do actual power off. */
+        gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+        mdelay(100);
+        gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
 static void __init dns323_init(void)
 {
         /* Setup basic Orion functions. Need to be called early. */
@@ -424,11 +436,20 @@ static void __init dns323_init(void)
         if (dns323_dev_id() == MV88F5182_DEV_ID)
                 orion5x_sata_init(&dns323_sata_data);
 
-        /* register dns323 specific power-off method */
+        /* The 5182 has flag to indicate the system is up. Without this flag
+         * set, power LED will flash and cannot be controlled via leds-gpio.
+         */
+        if (dns323_dev_id() == MV88F5182_DEV_ID)
+                gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+
+        /* Register dns323 specific power-off method */
         if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
             gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
                 pr_err("DNS323: failed to setup power-off GPIO\n");
-        pm_power_off = dns323_power_off;
+        if (dns323_dev_id() == MV88F5182_DEV_ID)
+                pm_power_off = dns323b_power_off;
+        else
+                pm_power_off = dns323a_power_off;
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 1b4ad9d5e2eb..cb0feca193d4 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -15,6 +15,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -24,6 +27,80 @@
 #include "common.h"
 #include "mpp.h"
 
+/*
+ * LEDs attached to GPIO
+ */
+static struct gpio_led wrt350n_v2_led_pins[] = {
+        {
+                .name           = "wrt350nv2:green:power",
+                .gpio           = 0,
+                .active_low     = 1,
+        }, {
+                .name           = "wrt350nv2:green:security",
+                .gpio           = 1,
+                .active_low     = 1,
+        }, {
+                .name           = "wrt350nv2:orange:power",
+                .gpio           = 5,
+                .active_low     = 1,
+        }, {
+                .name           = "wrt350nv2:green:usb",
+                .gpio           = 6,
+                .active_low     = 1,
+        }, {
+                .name           = "wrt350nv2:green:wireless",
+                .gpio           = 7,
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_led_platform_data wrt350n_v2_led_data = {
+        .leds           = wrt350n_v2_led_pins,
+        .num_leds       = ARRAY_SIZE(wrt350n_v2_led_pins),
+};
+
+static struct platform_device wrt350n_v2_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &wrt350n_v2_led_data,
+        },
+};
+
+/*
+ * Buttons attached to GPIO
+ */
+static struct gpio_keys_button wrt350n_v2_buttons[] = {
+        {
+                .code           = KEY_RESTART,
+                .gpio           = 3,
+                .desc           = "Reset Button",
+                .active_low     = 1,
+        }, {
+                .code           = KEY_WLAN,
+                .gpio           = 2,
+                .desc           = "WPS Button",
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
+        .buttons        = wrt350n_v2_buttons,
+        .nbuttons       = ARRAY_SIZE(wrt350n_v2_buttons),
+};
+
+static struct platform_device wrt350n_v2_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &wrt350n_v2_button_data,
+        },
+};
+
+/*
+ * General setup
+ */
 static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
         {  0, MPP_GPIO },               /* Power LED green (0=on) */
         {  1, MPP_GPIO },               /* Security LED (0=on) */
@@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void)
         orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
                                    WRT350N_V2_NOR_BOOT_SIZE);
         platform_device_register(&wrt350n_v2_nor_flash);
+        platform_device_register(&wrt350n_v2_leds);
+        platform_device_register(&wrt350n_v2_button_device);
 }
 
 static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index d41d41d78ad9..54c84a492a0f 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -133,6 +133,12 @@ static void __init orion_pcie_setup_wins(void __iomem *base,
         }
 
         /*
+         * Round up 'size' to the nearest power of two.
+         */
+        if ((size & (size - 1)) != 0)
+                size = 1 << fls(size);
+
+        /*
          * Setup BAR[1] to all DRAM banks.
          */
         writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1));