aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86_64
diff options
context:
space:
mode:
authorH. Peter Anvin <hpa@zytor.com>2007-07-11 15:18:57 -0400
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-07-12 13:55:55 -0400
commit91a6c462b02d8dc02dbe95e5a407d78078a38d01 (patch)
tree46ad95267332ca895b3af2d40def2e89e18aafd8 /arch/x86_64
parent4fd06960f120e02e9abc802a09f9511c400042a5 (diff)
Use the new x86 setup code for x86-64; unify with i386
This unifies arch/*/boot (except arch/*/boot/compressed) between i386 and x86-64, and uses the new x86 setup code for x86-64 as well. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'arch/x86_64')
-rw-r--r--arch/x86_64/boot/Makefile136
-rw-r--r--arch/x86_64/boot/bootsect.S98
-rw-r--r--arch/x86_64/boot/compressed/Makefile9
-rw-r--r--arch/x86_64/boot/install.sh2
-rw-r--r--arch/x86_64/boot/mtools.conf.in17
-rw-r--r--arch/x86_64/boot/setup.S826
-rw-r--r--arch/x86_64/boot/tools/build.c185
7 files changed, 10 insertions, 1263 deletions
diff --git a/arch/x86_64/boot/Makefile b/arch/x86_64/boot/Makefile
index ee6f6505f95f..67096389de1f 100644
--- a/arch/x86_64/boot/Makefile
+++ b/arch/x86_64/boot/Makefile
@@ -1,135 +1,9 @@
1# 1#
2# arch/x86_64/boot/Makefile 2# arch/x86_64/boot/Makefile
3# 3#
4# This file is subject to the terms and conditions of the GNU General Public 4# The actual boot code is shared with i386 including the Makefile.
5# License. See the file "COPYING" in the main directory of this archive 5# So tell kbuild that we fetch the code from i386 and include the
6# for more details. 6# Makefile from i386 too.
7#
8# Copyright (C) 1994 by Linus Torvalds
9#
10
11# ROOT_DEV specifies the default root-device when making the image.
12# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
13# the default of FLOPPY is used by 'build'.
14
15ROOT_DEV := CURRENT
16
17# If you want to preset the SVGA mode, uncomment the next line and
18# set SVGA_MODE to whatever number you want.
19# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
20# The number is the same as you would ordinarily press at bootup.
21
22SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
23
24# If you want the RAM disk device, define this to be the size in blocks.
25
26#RAMDISK := -DRAMDISK=512
27
28targets := vmlinux.bin bootsect bootsect.o \
29 setup setup.o bzImage mtools.conf
30
31EXTRA_CFLAGS := -m32
32
33hostprogs-y := tools/build
34HOST_EXTRACFLAGS += $(LINUXINCLUDE)
35subdir- := compressed/ #Let make clean descend in compressed/
36# ---------------------------------------------------------------------------
37
38$(obj)/bzImage: IMAGE_OFFSET := 0x100000
39$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
40$(obj)/bzImage: BUILDFLAGS := -b
41
42quiet_cmd_image = BUILD $@
43cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
44 $(obj)/vmlinux.bin $(ROOT_DEV) > $@
45
46$(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
47 $(obj)/vmlinux.bin $(obj)/tools/build FORCE
48 $(call if_changed,image)
49 @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
50
51$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
52 $(call if_changed,objcopy)
53
54LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
55LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext
56
57$(obj)/setup $(obj)/bootsect: %: %.o FORCE
58 $(call if_changed,ld)
59
60$(obj)/compressed/vmlinux: FORCE
61 $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
62
63# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
64FDARGS =
65# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
66FDINITRD =
67
68image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
69
70$(obj)/mtools.conf: $(src)/mtools.conf.in
71 sed -e 's|@OBJ@|$(obj)|g' < $< > $@
72
73# This requires write access to /dev/fd0
74zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
75 MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
76 syslinux /dev/fd0 ; sync
77 echo '$(image_cmdline)' | \
78 MTOOLSRC=$(obj)/mtools.conf mcopy - a:syslinux.cfg
79 if [ -f '$(FDINITRD)' ] ; then \
80 MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
81 fi
82 MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
83
84# These require being root or having syslinux 2.02 or higher installed
85fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
86 dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
87 MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
88 syslinux $(obj)/fdimage ; sync
89 echo '$(image_cmdline)' | \
90 MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
91 if [ -f '$(FDINITRD)' ] ; then \
92 MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
93 fi
94 MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
95
96fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
97 dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
98 MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
99 syslinux $(obj)/fdimage ; sync
100 echo '$(image_cmdline)' | \
101 MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
102 if [ -f '$(FDINITRD)' ] ; then \
103 MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
104 fi
105 MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
106
107isoimage: $(BOOTIMAGE)
108 -rm -rf $(obj)/isoimage
109 mkdir $(obj)/isoimage
110 for i in lib lib64 share end ; do \
111 if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
112 cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
113 break ; \
114 fi ; \
115 if [ $$i = end ] ; then exit 1 ; fi ; \
116 done
117 cp $(BOOTIMAGE) $(obj)/isoimage/linux
118 echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
119 if [ -f '$(FDINITRD)' ] ; then \
120 cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
121 fi
122 mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
123 -no-emul-boot -boot-load-size 4 -boot-info-table \
124 $(obj)/isoimage
125 rm -rf $(obj)/isoimage
126
127zlilo: $(BOOTIMAGE)
128 if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
129 if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
130 cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
131 cp System.map $(INSTALL_PATH)/
132 if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
133 7
134install: 8src := arch/i386/boot
135 sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)" 9include $(src)/Makefile
diff --git a/arch/x86_64/boot/bootsect.S b/arch/x86_64/boot/bootsect.S
deleted file mode 100644
index 011b7a4993d4..000000000000
--- a/arch/x86_64/boot/bootsect.S
+++ /dev/null
@@ -1,98 +0,0 @@
1/*
2 * bootsect.S Copyright (C) 1991, 1992 Linus Torvalds
3 *
4 * modified by Drew Eckhardt
5 * modified by Bruce Evans (bde)
6 * modified by Chris Noe (May 1999) (as86 -> gas)
7 * gutted by H. Peter Anvin (Jan 2003)
8 *
9 * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment
10 * addresses must be multiplied by 16 to obtain their respective linear
11 * addresses. To avoid confusion, linear addresses are written using leading
12 * hex while segment addresses are written as segment:offset.
13 *
14 */
15
16#include <asm/boot.h>
17
18SETUPSECTS = 4 /* default nr of setup-sectors */
19BOOTSEG = 0x07C0 /* original address of boot-sector */
20INITSEG = DEF_INITSEG /* we move boot here - out of the way */
21SETUPSEG = DEF_SETUPSEG /* setup starts here */
22SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */
23SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */
24 /* to be loaded */
25ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */
26SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */
27
28#ifndef SVGA_MODE
29#define SVGA_MODE ASK_VGA
30#endif
31
32#ifndef RAMDISK
33#define RAMDISK 0
34#endif
35
36#ifndef ROOT_RDONLY
37#define ROOT_RDONLY 1
38#endif
39
40.code16
41.text
42
43.global _start
44_start:
45
46 # Normalize the start address
47 jmpl $BOOTSEG, $start2
48
49start2:
50 movw %cs, %ax
51 movw %ax, %ds
52 movw %ax, %es
53 movw %ax, %ss
54 movw $0x7c00, %sp
55 sti
56 cld
57
58 movw $bugger_off_msg, %si
59
60msg_loop:
61 lodsb
62 andb %al, %al
63 jz die
64 movb $0xe, %ah
65 movw $7, %bx
66 int $0x10
67 jmp msg_loop
68
69die:
70 # Allow the user to press a key, then reboot
71 xorw %ax, %ax
72 int $0x16
73 int $0x19
74
75 # int 0x19 should never return. In case it does anyway,
76 # invoke the BIOS reset code...
77 ljmp $0xf000,$0xfff0
78
79
80bugger_off_msg:
81 .ascii "Direct booting from floppy is no longer supported.\r\n"
82 .ascii "Please use a boot loader program instead.\r\n"
83 .ascii "\n"
84 .ascii "Remove disk and press any key to reboot . . .\r\n"
85 .byte 0
86
87
88 # Kernel attributes; used by setup
89
90 .org 497
91setup_sects: .byte SETUPSECTS
92root_flags: .word ROOT_RDONLY
93syssize: .word SYSSIZE
94swap_dev: .word SWAP_DEV
95ram_size: .word RAMDISK
96vid_mode: .word SVGA_MODE
97root_dev: .word ROOT_DEV
98boot_flag: .word 0xAA55
diff --git a/arch/x86_64/boot/compressed/Makefile b/arch/x86_64/boot/compressed/Makefile
index 705a3e33d7e1..c9f2da7496c1 100644
--- a/arch/x86_64/boot/compressed/Makefile
+++ b/arch/x86_64/boot/compressed/Makefile
@@ -7,11 +7,12 @@
7# 7#
8 8
9targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o 9targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
10EXTRA_AFLAGS := -traditional
11 10
12# cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with 11CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2 \
13# -m32 12 -fno-strict-aliasing -fPIC -mcmodel=small \
14CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin 13 $(call cc-option, -ffreestanding) \
14 $(call cc-option, -fno-stack-protector)
15AFLAGS := $(CFLAGS) -D__ASSEMBLY__
15LDFLAGS := -m elf_x86_64 16LDFLAGS := -m elf_x86_64
16 17
17LDFLAGS_vmlinux := -T 18LDFLAGS_vmlinux := -T
diff --git a/arch/x86_64/boot/install.sh b/arch/x86_64/boot/install.sh
deleted file mode 100644
index baaa2369bdb8..000000000000
--- a/arch/x86_64/boot/install.sh
+++ /dev/null
@@ -1,2 +0,0 @@
1#!/bin/sh
2. $srctree/arch/i386/boot/install.sh
diff --git a/arch/x86_64/boot/mtools.conf.in b/arch/x86_64/boot/mtools.conf.in
deleted file mode 100644
index efd6d2490c1d..000000000000
--- a/arch/x86_64/boot/mtools.conf.in
+++ /dev/null
@@ -1,17 +0,0 @@
1#
2# mtools configuration file for "make (b)zdisk"
3#
4
5# Actual floppy drive
6drive a:
7 file="/dev/fd0"
8
9# 1.44 MB floppy disk image
10drive v:
11 file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter
12
13# 2.88 MB floppy disk image (mostly for virtual uses)
14drive w:
15 file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
16
17
diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S
deleted file mode 100644
index e9e33f949697..000000000000
--- a/arch/x86_64/boot/setup.S
+++ /dev/null
@@ -1,826 +0,0 @@
1/*
2 * setup.S Copyright (C) 1991, 1992 Linus Torvalds
3 *
4 * setup.s is responsible for getting the system data from the BIOS,
5 * and putting them into the appropriate places in system memory.
6 * both setup.s and system has been loaded by the bootblock.
7 *
8 * This code asks the bios for memory/disk/other parameters, and
9 * puts them in a "safe" place: 0x90000-0x901FF, ie where the
10 * boot-block used to be. It is then up to the protected mode
11 * system to read them from there before the area is overwritten
12 * for buffer-blocks.
13 *
14 * Move PS/2 aux init code to psaux.c
15 * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
16 *
17 * some changes and additional features by Christoph Niemann,
18 * March 1993/June 1994 (Christoph.Niemann@linux.org)
19 *
20 * add APM BIOS checking by Stephen Rothwell, May 1994
21 * (sfr@canb.auug.org.au)
22 *
23 * High load stuff, initrd support and position independency
24 * by Hans Lermen & Werner Almesberger, February 1996
25 * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
26 *
27 * Video handling moved to video.S by Martin Mares, March 1996
28 * <mj@k332.feld.cvut.cz>
29 *
30 * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
31 * parsons) to avoid loadlin confusion, July 1997
32 *
33 * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
34 * <stiker@northlink.com>
35 *
36 * Fix to work around buggy BIOSes which don't use carry bit correctly
37 * and/or report extended memory in CX/DX for e801h memory size detection
38 * call. As a result the kernel got wrong figures. The int15/e801h docs
39 * from Ralf Brown interrupt list seem to indicate AX/BX should be used
40 * anyway. So to avoid breaking many machines (presumably there was a reason
41 * to orginally use CX/DX instead of AX/BX), we do a kludge to see
42 * if CX/DX have been changed in the e801 call and if so use AX/BX .
43 * Michael Miller, April 2001 <michaelm@mjmm.org>
44 *
45 * Added long mode checking and SSE force. March 2003, Andi Kleen.
46 */
47
48#include <asm/segment.h>
49#include <linux/utsrelease.h>
50#include <linux/compile.h>
51#include <asm/boot.h>
52#include <asm/e820.h>
53#include <asm/page.h>
54#include <asm/setup.h>
55
56/* Signature words to ensure LILO loaded us right */
57#define SIG1 0xAA55
58#define SIG2 0x5A5A
59
60INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way
61SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536).
62SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment
63 # ... and the former contents of CS
64
65DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020
66
67.code16
68.globl begtext, begdata, begbss, endtext, enddata, endbss
69
70.text
71begtext:
72.data
73begdata:
74.bss
75begbss:
76.text
77
78start:
79 jmp trampoline
80
81# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
82
83 .ascii "HdrS" # header signature
84 .word 0x0206 # header version number (>= 0x0105)
85 # or else old loadlin-1.5 will fail)
86realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
87start_sys_seg: .word SYSSEG
88 .word kernel_version # pointing to kernel version string
89 # above section of header is compatible
90 # with loadlin-1.5 (header v1.5). Don't
91 # change it.
92
93type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
94 # Bootlin, SYSLX, bootsect...)
95 # See Documentation/i386/boot.txt for
96 # assigned ids
97
98# flags, unused bits must be zero (RFU) bit within loadflags
99loadflags:
100LOADED_HIGH = 1 # If set, the kernel is loaded high
101CAN_USE_HEAP = 0x80 # If set, the loader also has set
102 # heap_end_ptr to tell how much
103 # space behind setup.S can be used for
104 # heap purposes.
105 # Only the loader knows what is free
106#ifndef __BIG_KERNEL__
107 .byte 0
108#else
109 .byte LOADED_HIGH
110#endif
111
112setup_move_size: .word 0x8000 # size to move, when setup is not
113 # loaded at 0x90000. We will move setup
114 # to 0x90000 then just before jumping
115 # into the kernel. However, only the
116 # loader knows how much data behind
117 # us also needs to be loaded.
118
119code32_start: # here loaders can put a different
120 # start address for 32-bit code.
121#ifndef __BIG_KERNEL__
122 .long 0x1000 # 0x1000 = default for zImage
123#else
124 .long 0x100000 # 0x100000 = default for big kernel
125#endif
126
127ramdisk_image: .long 0 # address of loaded ramdisk image
128 # Here the loader puts the 32-bit
129 # address where it loaded the image.
130 # This only will be read by the kernel.
131
132ramdisk_size: .long 0 # its size in bytes
133
134bootsect_kludge:
135 .long 0 # obsolete
136
137heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later)
138 # space from here (exclusive) down to
139 # end of setup code can be used by setup
140 # for local heap purposes.
141
142pad1: .word 0
143cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
144 # If nonzero, a 32-bit pointer
145 # to the kernel command line.
146 # The command line should be
147 # located between the start of
148 # setup and the end of low
149 # memory (0xa0000), or it may
150 # get overwritten before it
151 # gets read. If this field is
152 # used, there is no longer
153 # anything magical about the
154 # 0x90000 segment; the setup
155 # can be located anywhere in
156 # low memory 0x10000 or higher.
157
158ramdisk_max: .long 0xffffffff
159kernel_alignment: .long 0x200000 # physical addr alignment required for
160 # protected mode relocatable kernel
161#ifdef CONFIG_RELOCATABLE
162relocatable_kernel: .byte 1
163#else
164relocatable_kernel: .byte 0
165#endif
166pad2: .byte 0
167pad3: .word 0
168
169cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
170 #added with boot protocol
171 #version 2.06
172
173trampoline: call start_of_setup
174 .align 16
175 # The offset at this point is 0x240
176 .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
177# End of setup header #####################################################
178
179start_of_setup:
180# Bootlin depends on this being done early
181 movw $0x01500, %ax
182 movb $0x81, %dl
183 int $0x13
184
185#ifdef SAFE_RESET_DISK_CONTROLLER
186# Reset the disk controller.
187 movw $0x0000, %ax
188 movb $0x80, %dl
189 int $0x13
190#endif
191
192# Set %ds = %cs, we know that SETUPSEG = %cs at this point
193 movw %cs, %ax # aka SETUPSEG
194 movw %ax, %ds
195# Check signature at end of setup
196 cmpw $SIG1, setup_sig1
197 jne bad_sig
198
199 cmpw $SIG2, setup_sig2
200 jne bad_sig
201
202 jmp good_sig1
203
204# Routine to print asciiz string at ds:si
205prtstr:
206 lodsb
207 andb %al, %al
208 jz fin
209
210 call prtchr
211 jmp prtstr
212
213fin: ret
214
215# Space printing
216prtsp2: call prtspc # Print double space
217prtspc: movb $0x20, %al # Print single space (note: fall-thru)
218
219prtchr:
220 pushw %ax
221 pushw %cx
222 movw $0007,%bx
223 movw $0x01, %cx
224 movb $0x0e, %ah
225 int $0x10
226 popw %cx
227 popw %ax
228 ret
229
230beep: movb $0x07, %al
231 jmp prtchr
232
233no_sig_mess: .string "No setup signature found ..."
234
235good_sig1:
236 jmp good_sig
237
238# We now have to find the rest of the setup code/data
239bad_sig:
240 movw %cs, %ax # SETUPSEG
241 subw $DELTA_INITSEG, %ax # INITSEG
242 movw %ax, %ds
243 xorb %bh, %bh
244 movb (497), %bl # get setup sect from bootsect
245 subw $4, %bx # LILO loads 4 sectors of setup
246 shlw $8, %bx # convert to words (1sect=2^8 words)
247 movw %bx, %cx
248 shrw $3, %bx # convert to segment
249 addw $SYSSEG, %bx
250 movw %bx, %cs:start_sys_seg
251# Move rest of setup code/data to here
252 movw $2048, %di # four sectors loaded by LILO
253 subw %si, %si
254 movw %cs, %ax # aka SETUPSEG
255 movw %ax, %es
256 movw $SYSSEG, %ax
257 movw %ax, %ds
258 rep
259 movsw
260 movw %cs, %ax # aka SETUPSEG
261 movw %ax, %ds
262 cmpw $SIG1, setup_sig1
263 jne no_sig
264
265 cmpw $SIG2, setup_sig2
266 jne no_sig
267
268 jmp good_sig
269
270no_sig:
271 lea no_sig_mess, %si
272 call prtstr
273
274no_sig_loop:
275 jmp no_sig_loop
276
277good_sig:
278 movw %cs, %ax # aka SETUPSEG
279 subw $DELTA_INITSEG, %ax # aka INITSEG
280 movw %ax, %ds
281# Check if an old loader tries to load a big-kernel
282 testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel?
283 jz loader_ok # No, no danger for old loaders.
284
285 cmpb $0, %cs:type_of_loader # Do we have a loader that
286 # can deal with us?
287 jnz loader_ok # Yes, continue.
288
289 pushw %cs # No, we have an old loader,
290 popw %ds # die.
291 lea loader_panic_mess, %si
292 call prtstr
293
294 jmp no_sig_loop
295
296loader_panic_mess: .string "Wrong loader, giving up..."
297
298loader_ok:
299 /* check for long mode. */
300 /* we have to do this before the VESA setup, otherwise the user
301 can't see the error message. */
302
303 pushw %ds
304 movw %cs,%ax
305 movw %ax,%ds
306
307 call verify_cpu
308 testl %eax,%eax
309 jz sse_ok
310
311no_longmode:
312 call beep
313 lea long_mode_panic,%si
314 call prtstr
315no_longmode_loop:
316 jmp no_longmode_loop
317long_mode_panic:
318 .string "Your CPU does not support long mode. Use a 32bit distribution."
319 .byte 0
320
321#include "../kernel/verify_cpu.S"
322sse_ok:
323 popw %ds
324
325# tell BIOS we want to go to long mode
326 movl $0xec00,%eax # declare target operating mode
327 movl $2,%ebx # long mode
328 int $0x15
329
330# Get memory size (extended mem, kB)
331
332 xorl %eax, %eax
333 movl %eax, (0x1e0)
334#ifndef STANDARD_MEMORY_BIOS_CALL
335 movb %al, (E820NR)
336# Try three different memory detection schemes. First, try
337# e820h, which lets us assemble a memory map, then try e801h,
338# which returns a 32-bit memory size, and finally 88h, which
339# returns 0-64m
340
341# method E820H:
342# the memory map from hell. e820h returns memory classified into
343# a whole bunch of different types, and allows memory holes and
344# everything. We scan through this memory map and build a list
345# of the first 32 memory areas, which we return at [E820MAP].
346# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
347
348#define SMAP 0x534d4150
349
350meme820:
351 xorl %ebx, %ebx # continuation counter
352 movw $E820MAP, %di # point into the whitelist
353 # so we can have the bios
354 # directly write into it.
355
356jmpe820:
357 movl $0x0000e820, %eax # e820, upper word zeroed
358 movl $SMAP, %edx # ascii 'SMAP'
359 movl $20, %ecx # size of the e820rec
360 pushw %ds # data record.
361 popw %es
362 int $0x15 # make the call
363 jc bail820 # fall to e801 if it fails
364
365 cmpl $SMAP, %eax # check the return is `SMAP'
366 jne bail820 # fall to e801 if it fails
367
368# cmpl $1, 16(%di) # is this usable memory?
369# jne again820
370
371 # If this is usable memory, we save it by simply advancing %di by
372 # sizeof(e820rec).
373 #
374good820:
375 movb (E820NR), %al # up to 128 entries
376 cmpb $E820MAX, %al
377 jae bail820
378
379 incb (E820NR)
380 movw %di, %ax
381 addw $20, %ax
382 movw %ax, %di
383again820:
384 cmpl $0, %ebx # check to see if
385 jne jmpe820 # %ebx is set to EOF
386bail820:
387
388
389# method E801H:
390# memory size is in 1k chunksizes, to avoid confusing loadlin.
391# we store the 0xe801 memory size in a completely different place,
392# because it will most likely be longer than 16 bits.
393# (use 1e0 because that's what Larry Augustine uses in his
394# alternative new memory detection scheme, and it's sensible
395# to write everything into the same place.)
396
397meme801:
398 stc # fix to work around buggy
399 xorw %cx,%cx # BIOSes which don't clear/set
400 xorw %dx,%dx # carry on pass/error of
401 # e801h memory size call
402 # or merely pass cx,dx though
403 # without changing them.
404 movw $0xe801, %ax
405 int $0x15
406 jc mem88
407
408 cmpw $0x0, %cx # Kludge to handle BIOSes
409 jne e801usecxdx # which report their extended
410 cmpw $0x0, %dx # memory in AX/BX rather than
411 jne e801usecxdx # CX/DX. The spec I have read
412 movw %ax, %cx # seems to indicate AX/BX
413 movw %bx, %dx # are more reasonable anyway...
414
415e801usecxdx:
416 andl $0xffff, %edx # clear sign extend
417 shll $6, %edx # and go from 64k to 1k chunks
418 movl %edx, (0x1e0) # store extended memory size
419 andl $0xffff, %ecx # clear sign extend
420 addl %ecx, (0x1e0) # and add lower memory into
421 # total size.
422
423# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or
424# 64mb, depending on the bios) in ax.
425mem88:
426
427#endif
428 movb $0x88, %ah
429 int $0x15
430 movw %ax, (2)
431
432# Set the keyboard repeat rate to the max
433 movw $0x0305, %ax
434 xorw %bx, %bx
435 int $0x16
436
437# Check for video adapter and its parameters and allow the
438# user to browse video modes.
439 call video # NOTE: we need %ds pointing
440 # to bootsector
441
442# Get hd0 data...
443 xorw %ax, %ax
444 movw %ax, %ds
445 ldsw (4 * 0x41), %si
446 movw %cs, %ax # aka SETUPSEG
447 subw $DELTA_INITSEG, %ax # aka INITSEG
448 pushw %ax
449 movw %ax, %es
450 movw $0x0080, %di
451 movw $0x10, %cx
452 pushw %cx
453 cld
454 rep
455 movsb
456# Get hd1 data...
457 xorw %ax, %ax
458 movw %ax, %ds
459 ldsw (4 * 0x46), %si
460 popw %cx
461 popw %es
462 movw $0x0090, %di
463 rep
464 movsb
465# Check that there IS a hd1 :-)
466 movw $0x01500, %ax
467 movb $0x81, %dl
468 int $0x13
469 jc no_disk1
470
471 cmpb $3, %ah
472 je is_disk1
473
474no_disk1:
475 movw %cs, %ax # aka SETUPSEG
476 subw $DELTA_INITSEG, %ax # aka INITSEG
477 movw %ax, %es
478 movw $0x0090, %di
479 movw $0x10, %cx
480 xorw %ax, %ax
481 cld
482 rep
483 stosb
484is_disk1:
485
486# Check for PS/2 pointing device
487 movw %cs, %ax # aka SETUPSEG
488 subw $DELTA_INITSEG, %ax # aka INITSEG
489 movw %ax, %ds
490 movb $0, (0x1ff) # default is no pointing device
491 int $0x11 # int 0x11: equipment list
492 testb $0x04, %al # check if mouse installed
493 jz no_psmouse
494
495 movb $0xAA, (0x1ff) # device present
496no_psmouse:
497
498#include "../../i386/boot/edd.S"
499
500# Now we want to move to protected mode ...
501 cmpw $0, %cs:realmode_swtch
502 jz rmodeswtch_normal
503
504 lcall *%cs:realmode_swtch
505
506 jmp rmodeswtch_end
507
508rmodeswtch_normal:
509 pushw %cs
510 call default_switch
511
512rmodeswtch_end:
513# we get the code32 start address and modify the below 'jmpi'
514# (loader may have changed it)
515 movl %cs:code32_start, %eax
516 movl %eax, %cs:code32
517
518# Now we move the system to its rightful place ... but we check if we have a
519# big-kernel. In that case we *must* not move it ...
520 testb $LOADED_HIGH, %cs:loadflags
521 jz do_move0 # .. then we have a normal low
522 # loaded zImage
523 # .. or else we have a high
524 # loaded bzImage
525 jmp end_move # ... and we skip moving
526
527do_move0:
528 movw $0x100, %ax # start of destination segment
529 movw %cs, %bp # aka SETUPSEG
530 subw $DELTA_INITSEG, %bp # aka INITSEG
531 movw %cs:start_sys_seg, %bx # start of source segment
532 cld
533do_move:
534 movw %ax, %es # destination segment
535 incb %ah # instead of add ax,#0x100
536 movw %bx, %ds # source segment
537 addw $0x100, %bx
538 subw %di, %di
539 subw %si, %si
540 movw $0x800, %cx
541 rep
542 movsw
543 cmpw %bp, %bx # assume start_sys_seg > 0x200,
544 # so we will perhaps read one
545 # page more than needed, but
546 # never overwrite INITSEG
547 # because destination is a
548 # minimum one page below source
549 jb do_move
550
551end_move:
552# then we load the segment descriptors
553 movw %cs, %ax # aka SETUPSEG
554 movw %ax, %ds
555
556# Check whether we need to be downward compatible with version <=201
557 cmpl $0, cmd_line_ptr
558 jne end_move_self # loader uses version >=202 features
559 cmpb $0x20, type_of_loader
560 je end_move_self # bootsect loader, we know of it
561
562# Boot loader doesnt support boot protocol version 2.02.
563# If we have our code not at 0x90000, we need to move it there now.
564# We also then need to move the params behind it (commandline)
565# Because we would overwrite the code on the current IP, we move
566# it in two steps, jumping high after the first one.
567 movw %cs, %ax
568 cmpw $SETUPSEG, %ax
569 je end_move_self
570
571 cli # make sure we really have
572 # interrupts disabled !
573 # because after this the stack
574 # should not be used
575 subw $DELTA_INITSEG, %ax # aka INITSEG
576 movw %ss, %dx
577 cmpw %ax, %dx
578 jb move_self_1
579
580 addw $INITSEG, %dx
581 subw %ax, %dx # this will go into %ss after
582 # the move
583move_self_1:
584 movw %ax, %ds
585 movw $INITSEG, %ax # real INITSEG
586 movw %ax, %es
587 movw %cs:setup_move_size, %cx
588 std # we have to move up, so we use
589 # direction down because the
590 # areas may overlap
591 movw %cx, %di
592 decw %di
593 movw %di, %si
594 subw $move_self_here+0x200, %cx
595 rep
596 movsb
597 ljmp $SETUPSEG, $move_self_here
598
599move_self_here:
600 movw $move_self_here+0x200, %cx
601 rep
602 movsb
603 movw $SETUPSEG, %ax
604 movw %ax, %ds
605 movw %dx, %ss
606end_move_self: # now we are at the right place
607 lidt idt_48 # load idt with 0,0
608 xorl %eax, %eax # Compute gdt_base
609 movw %ds, %ax # (Convert %ds:gdt to a linear ptr)
610 shll $4, %eax
611 addl $gdt, %eax
612 movl %eax, (gdt_48+2)
613 lgdt gdt_48 # load gdt with whatever is
614 # appropriate
615
616# that was painless, now we enable a20
617 call empty_8042
618
619 movb $0xD1, %al # command write
620 outb %al, $0x64
621 call empty_8042
622
623 movb $0xDF, %al # A20 on
624 outb %al, $0x60
625 call empty_8042
626
627#
628# You must preserve the other bits here. Otherwise embarrasing things
629# like laptops powering off on boot happen. Corrected version by Kira
630# Brown from Linux 2.2
631#
632 inb $0x92, %al #
633 orb $02, %al # "fast A20" version
634 outb %al, $0x92 # some chips have only this
635
636# wait until a20 really *is* enabled; it can take a fair amount of
637# time on certain systems; Toshiba Tecras are known to have this
638# problem. The memory location used here (0x200) is the int 0x80
639# vector, which should be safe to use.
640
641 xorw %ax, %ax # segment 0x0000
642 movw %ax, %fs
643 decw %ax # segment 0xffff (HMA)
644 movw %ax, %gs
645a20_wait:
646 incw %ax # unused memory location <0xfff0
647 movw %ax, %fs:(0x200) # we use the "int 0x80" vector
648 cmpw %gs:(0x210), %ax # and its corresponding HMA addr
649 je a20_wait # loop until no longer aliased
650
651# make sure any possible coprocessor is properly reset..
652 xorw %ax, %ax
653 outb %al, $0xf0
654 call delay
655
656 outb %al, $0xf1
657 call delay
658
659# well, that went ok, I hope. Now we mask all interrupts - the rest
660# is done in init_IRQ().
661 movb $0xFF, %al # mask all interrupts for now
662 outb %al, $0xA1
663 call delay
664
665 movb $0xFB, %al # mask all irq's but irq2 which
666 outb %al, $0x21 # is cascaded
667
668# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
669# need no steenking BIOS anyway (except for the initial loading :-).
670# The BIOS-routine wants lots of unnecessary data, and it's less
671# "interesting" anyway. This is how REAL programmers do it.
672#
673# Well, now's the time to actually move into protected mode. To make
674# things as simple as possible, we do no register set-up or anything,
675# we let the gnu-compiled 32-bit programs do that. We just jump to
676# absolute address 0x1000 (or the loader supplied one),
677# in 32-bit protected mode.
678#
679# Note that the short jump isn't strictly needed, although there are
680# reasons why it might be a good idea. It won't hurt in any case.
681 movw $1, %ax # protected mode (PE) bit
682 lmsw %ax # This is it!
683 jmp flush_instr
684
685flush_instr:
686 xorw %bx, %bx # Flag to indicate a boot
687 xorl %esi, %esi # Pointer to real-mode code
688 movw %cs, %si
689 subw $DELTA_INITSEG, %si
690 shll $4, %esi # Convert to 32-bit pointer
691# NOTE: For high loaded big kernels we need a
692# jmpi 0x100000,__KERNEL_CS
693#
694# but we yet haven't reloaded the CS register, so the default size
695# of the target offset still is 16 bit.
696# However, using an operand prefix (0x66), the CPU will properly
697# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
698# Manual, Mixing 16-bit and 32-bit code, page 16-6)
699
700 .byte 0x66, 0xea # prefix + jmpi-opcode
701code32: .long 0x1000 # will be set to 0x100000
702 # for big kernels
703 .word __KERNEL_CS
704
705# Here's a bunch of information about your current kernel..
706kernel_version: .ascii UTS_RELEASE
707 .ascii " ("
708 .ascii LINUX_COMPILE_BY
709 .ascii "@"
710 .ascii LINUX_COMPILE_HOST
711 .ascii ") "
712 .ascii UTS_VERSION
713 .byte 0
714
715# This is the default real mode switch routine.
716# to be called just before protected mode transition
717default_switch:
718 cli # no interrupts allowed !
719 movb $0x80, %al # disable NMI for bootup
720 # sequence
721 outb %al, $0x70
722 lret
723
724
725# This routine checks that the keyboard command queue is empty
726# (after emptying the output buffers)
727#
728# Some machines have delusions that the keyboard buffer is always full
729# with no keyboard attached...
730#
731# If there is no keyboard controller, we will usually get 0xff
732# to all the reads. With each IO taking a microsecond and
733# a timeout of 100,000 iterations, this can take about half a
734# second ("delay" == outb to port 0x80). That should be ok,
735# and should also be plenty of time for a real keyboard controller
736# to empty.
737#
738
739empty_8042:
740 pushl %ecx
741 movl $100000, %ecx
742
743empty_8042_loop:
744 decl %ecx
745 jz empty_8042_end_loop
746
747 call delay
748
749 inb $0x64, %al # 8042 status port
750 testb $1, %al # output buffer?
751 jz no_output
752
753 call delay
754 inb $0x60, %al # read it
755 jmp empty_8042_loop
756
757no_output:
758 testb $2, %al # is input buffer full?
759 jnz empty_8042_loop # yes - loop
760empty_8042_end_loop:
761 popl %ecx
762 ret
763
764# Read the cmos clock. Return the seconds in al
765gettime:
766 pushw %cx
767 movb $0x02, %ah
768 int $0x1a
769 movb %dh, %al # %dh contains the seconds
770 andb $0x0f, %al
771 movb %dh, %ah
772 movb $0x04, %cl
773 shrb %cl, %ah
774 aad
775 popw %cx
776 ret
777
778# Delay is needed after doing I/O
779delay:
780 outb %al,$0x80
781 ret
782
783# Descriptor tables
784gdt:
785 .word 0, 0, 0, 0 # dummy
786
787 .word 0, 0, 0, 0 # unused
788
789 .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
790 .word 0 # base address = 0
791 .word 0x9A00 # code read/exec
792 .word 0x00CF # granularity = 4096, 386
793 # (+5th nibble of limit)
794
795 .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
796 .word 0 # base address = 0
797 .word 0x9200 # data read/write
798 .word 0x00CF # granularity = 4096, 386
799 # (+5th nibble of limit)
800gdt_end:
801idt_48:
802 .word 0 # idt limit = 0
803 .word 0, 0 # idt base = 0L
804gdt_48:
805 .word gdt_end-gdt-1 # gdt limit
806 .word 0, 0 # gdt base (filled in later)
807
808# Include video setup & detection code
809
810#include "../../i386/boot/video.S"
811
812# Setup signature -- must be last
813setup_sig1: .word SIG1
814setup_sig2: .word SIG2
815
816# After this point, there is some free space which is used by the video mode
817# handling code to store the temporary mode table (not used by the kernel).
818
819modelist:
820
821.text
822endtext:
823.data
824enddata:
825.bss
826endbss:
diff --git a/arch/x86_64/boot/tools/build.c b/arch/x86_64/boot/tools/build.c
deleted file mode 100644
index eae86691709a..000000000000
--- a/arch/x86_64/boot/tools/build.c
+++ /dev/null
@@ -1,185 +0,0 @@
1/*
2 * Copyright (C) 1991, 1992 Linus Torvalds
3 * Copyright (C) 1997 Martin Mares
4 */
5
6/*
7 * This file builds a disk-image from three different files:
8 *
9 * - bootsect: compatibility mbr which prints an error message if
10 * someone tries to boot the kernel directly.
11 * - setup: 8086 machine code, sets up system parm
12 * - system: 80386 code for actual system
13 *
14 * It does some checking that all files are of the correct type, and
15 * just writes the result to stdout, removing headers and padding to
16 * the right amount. It also writes some system data to stderr.
17 */
18
19/*
20 * Changes by tytso to allow root device specification
21 * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
22 * Cross compiling fixes by Gertjan van Wingerde, July 1996
23 * Rewritten by Martin Mares, April 1997
24 */
25
26#include <stdio.h>
27#include <string.h>
28#include <stdlib.h>
29#include <stdarg.h>
30#include <sys/types.h>
31#include <sys/stat.h>
32#include <sys/sysmacros.h>
33#include <unistd.h>
34#include <fcntl.h>
35#include <asm/boot.h>
36
37typedef unsigned char byte;
38typedef unsigned short word;
39typedef unsigned long u32;
40
41#define DEFAULT_MAJOR_ROOT 0
42#define DEFAULT_MINOR_ROOT 0
43
44/* Minimal number of setup sectors (see also bootsect.S) */
45#define SETUP_SECTS 4
46
47byte buf[1024];
48int fd;
49int is_big_kernel;
50
51void die(const char * str, ...)
52{
53 va_list args;
54 va_start(args, str);
55 vfprintf(stderr, str, args);
56 fputc('\n', stderr);
57 exit(1);
58}
59
60void file_open(const char *name)
61{
62 if ((fd = open(name, O_RDONLY, 0)) < 0)
63 die("Unable to open `%s': %m", name);
64}
65
66void usage(void)
67{
68 die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
69}
70
71int main(int argc, char ** argv)
72{
73 unsigned int i, c, sz, setup_sectors;
74 u32 sys_size;
75 byte major_root, minor_root;
76 struct stat sb;
77
78 if (argc > 2 && !strcmp(argv[1], "-b"))
79 {
80 is_big_kernel = 1;
81 argc--, argv++;
82 }
83 if ((argc < 4) || (argc > 5))
84 usage();
85 if (argc > 4) {
86 if (!strcmp(argv[4], "CURRENT")) {
87 if (stat("/", &sb)) {
88 perror("/");
89 die("Couldn't stat /");
90 }
91 major_root = major(sb.st_dev);
92 minor_root = minor(sb.st_dev);
93 } else if (strcmp(argv[4], "FLOPPY")) {
94 if (stat(argv[4], &sb)) {
95 perror(argv[4]);
96 die("Couldn't stat root device.");
97 }
98 major_root = major(sb.st_rdev);
99 minor_root = minor(sb.st_rdev);
100 } else {
101 major_root = 0;
102 minor_root = 0;
103 }
104 } else {
105 major_root = DEFAULT_MAJOR_ROOT;
106 minor_root = DEFAULT_MINOR_ROOT;
107 }
108 fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
109
110 file_open(argv[1]);
111 i = read(fd, buf, sizeof(buf));
112 fprintf(stderr,"Boot sector %d bytes.\n",i);
113 if (i != 512)
114 die("Boot block must be exactly 512 bytes");
115 if (buf[510] != 0x55 || buf[511] != 0xaa)
116 die("Boot block hasn't got boot flag (0xAA55)");
117 buf[508] = minor_root;
118 buf[509] = major_root;
119 if (write(1, buf, 512) != 512)
120 die("Write call failed");
121 close (fd);
122
123 file_open(argv[2]); /* Copy the setup code */
124 for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c )
125 if (write(1, buf, c) != c)
126 die("Write call failed");
127 if (c != 0)
128 die("read-error on `setup'");
129 close (fd);
130
131 setup_sectors = (i + 511) / 512; /* Pad unused space with zeros */
132 /* for compatibility with ancient versions of LILO. */
133 if (setup_sectors < SETUP_SECTS)
134 setup_sectors = SETUP_SECTS;
135 fprintf(stderr, "Setup is %d bytes.\n", i);
136 memset(buf, 0, sizeof(buf));
137 while (i < setup_sectors * 512) {
138 c = setup_sectors * 512 - i;
139 if (c > sizeof(buf))
140 c = sizeof(buf);
141 if (write(1, buf, c) != c)
142 die("Write call failed");
143 i += c;
144 }
145
146 file_open(argv[3]);
147 if (fstat (fd, &sb))
148 die("Unable to stat `%s': %m", argv[3]);
149 sz = sb.st_size;
150 fprintf (stderr, "System is %d kB\n", sz/1024);
151 sys_size = (sz + 15) / 16;
152 if (!is_big_kernel && sys_size > DEF_SYSSIZE)
153 die("System is too big. Try using bzImage or modules.");
154 while (sz > 0) {
155 int l, n;
156
157 l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
158 if ((n=read(fd, buf, l)) != l) {
159 if (n < 0)
160 die("Error reading %s: %m", argv[3]);
161 else
162 die("%s: Unexpected EOF", argv[3]);
163 }
164 if (write(1, buf, l) != l)
165 die("Write failed");
166 sz -= l;
167 }
168 close(fd);
169
170 if (lseek(1, 497, SEEK_SET) != 497) /* Write sizes to the bootsector */
171 die("Output: seek failed");
172 buf[0] = setup_sectors;
173 if (write(1, buf, 1) != 1)
174 die("Write of setup sector count failed");
175 if (lseek(1, 500, SEEK_SET) != 500)
176 die("Output: seek failed");
177 buf[0] = (sys_size & 0xff);
178 buf[1] = ((sys_size >> 8) & 0xff);
179 buf[2] = ((sys_size >> 16) & 0xff);
180 buf[3] = ((sys_size >> 24) & 0xff);
181 if (write(1, buf, 4) != 4)
182 die("Write of image length failed");
183
184 return 0; /* Everything is OK */
185}
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-21 13:26:31 -0400