x86, mtrr: Avoid MTRR reprogramming on BP during boot on UP platforms

Markus Kohn ran into a hard hang regression on an acer aspire
1310, when acpi is enabled. git bisect showed the following
commit as the bad one that introduced the boot regression.

	commit d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3
	Author: Suresh Siddha <suresh.b.siddha@intel.com>
	Date:   Wed Aug 19 18:05:36 2009 -0700

	    x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init

Because of the UP configuration of that platform,
native_smp_prepare_cpus() bailed out (in smp_sanity_check())
before doing the set_mtrr_aps_delayed_init()

Further down the boot path, native_smp_cpus_done() will call the
delayed MTRR initialization for the AP's (mtrr_aps_init()) with
mtrr_aps_delayed_init not set. This resulted in the boot
processor reprogramming its MTRR's to the values seen during the
start of the OS boot. While this is not needed ideally, this
shouldn't have caused any side-effects. This is because the
reprogramming of MTRR's (set_mtrr_state() that gets called via
set_mtrr()) will check if the live register contents are
different from what is being asked to write and will do the actual
write only if they are different.

BP's mtrr state is read during the start of the OS boot and
typically nothing would have changed when we ask to reprogram it
on BP again because of the above scenario on an UP platform. So
on a normal UP platform no reprogramming of BP MTRR MSR's
happens and all is well.

However, on this platform, bios seems to be modifying the fixed
mtrr range registers between the start of OS boot and when we
double check the live registers for reprogramming BP MTRR
registers. And as the live registers are modified, we end up
reprogramming the MTRR's to the state seen during the start of
the OS boot.

During ACPI initialization, something in the bios (probably smi
handler?) don't like this fact and results in a hard lockup.

We didn't see this boot hang issue on this platform before the
commit d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3, because only
the AP's (if any) will program its MTRR's to the value that BP
had at the start of the OS boot.

Fix this issue by checking mtrr_aps_delayed_init before
continuing further in the mtrr_aps_init(). Now, only AP's (if
any) will program its MTRR's to the BP values during boot.

Addresses https://bugzilla.novell.com/show_bug.cgi?id=623393

  [ By the way, this behavior of the bios modifying MTRR's after the start
    of the OS boot is not common and the kernel is not prepared to
    handle this situation well. Irrespective of this issue, during
    suspend/resume, linux kernel will try to reprogram the BP's MTRR values
    to the values seen during the start of the OS boot. So suspend/resume might
    be already broken on this platform for all linux kernel versions. ]

Reported-and-bisected-by: Markus Kohn <jabber@gmx.org>
Tested-by: Markus Kohn <jabber@gmx.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Thomas Renninger <trenn@novell.com>
Cc: Rafael Wysocki <rjw@novell.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: stable@kernel.org # [v2.6.32+]
LKML-Reference: <1296694975.4418.402.camel@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 9 insertions, 1 deletions

diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 01c0f3ee6cc3..bebabec5b448 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -793,13 +793,21 @@ void set_mtrr_aps_delayed_init(void)
 }
 
 /*
- * MTRR initialization for all AP's
+ * Delayed MTRR initialization for all AP's
  */
 void mtrr_aps_init(void)
 {
         if (!use_intel())
                 return;
 
+        /*
+         * Check if someone has requested the delay of AP MTRR initialization,
+         * by doing set_mtrr_aps_delayed_init(), prior to this point. If not,
+         * then we are done.
+         */
+        if (!mtrr_aps_delayed_init)
+                return;
+
         set_mtrr(~0U, 0, 0, 0);
         mtrr_aps_delayed_init = false;
 }