Merge branch 'master' into for-linus

11 files changed, 93 insertions, 108 deletions

diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index e2ff504b4ddc..f8ed0658404c 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
 # create a compressed vmlinux image from the original vmlinux
 #
 
-targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 3cc06e3fceb8..16748077559a 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -2,6 +2,7 @@
 #define _ASM_X86_PGTABLE_H
 
 #include <asm/page.h>
+#include <asm/e820.h>
 
 #include <asm/pgtable_types.h>
 
@@ -269,10 +270,17 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 
 #define canon_pgprot(p) __pgprot(massage_pgprot(p))
 
-static inline int is_new_memtype_allowed(unsigned long flags,
-                                                unsigned long new_flags)
+static inline int is_new_memtype_allowed(u64 paddr, unsigned long size,
+                                         unsigned long flags,
+                                         unsigned long new_flags)
 {
         /*
+         * PAT type is always WB for ISA. So no need to check.
+         */
+        if (is_ISA_range(paddr, paddr + size - 1))
+                return 1;
+
+        /*
          * Certain new memtypes are not allowed with certain
          * requested memtype:
          * - request is uncached, return cannot be write-back
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index bc3e880f9b82..fcec2f1d34a1 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -44,6 +44,11 @@ static struct apic *apic_probe[] __initdata = {
         NULL,
 };
 
+static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
+{
+        return hard_smp_processor_id() >> index_msb;
+}
+
 /*
  * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
  */
@@ -69,6 +74,11 @@ void __init default_setup_apic_routing(void)
                 printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
         }
 
+        if (is_vsmp_box()) {
+                /* need to update phys_pkg_id */
+                apic->phys_pkg_id = apicid_phys_pkg_id;
+        }
+
         /*
          * Now that apic routing model is selected, configure the
          * fault handling for intr remapping.
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 3efcb2b96a15..c1f253dac155 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -7,6 +7,10 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_common.o = -pg
 endif
 
+# Make sure load_percpu_segment has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_common.o         := $(nostackp)
+
 obj-y                   := intel_cacheinfo.o addon_cpuid_features.o
 obj-y                   += proc.o capflags.o powerflags.o common.o
 obj-y                   += vmware.o hypervisor.o
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 0d98a01cbdb2..cc827ac9e8d3 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -261,9 +261,7 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
  * which will be freed later
  */
 
-#ifndef CONFIG_HOTPLUG_CPU
-.section .init.text,"ax",@progbits
-#endif
+__CPUINIT
 
 #ifdef CONFIG_SMP
 ENTRY(startup_32_smp)
@@ -602,11 +600,7 @@ ignore_int:
 #endif
         iret
 
-#ifndef CONFIG_HOTPLUG_CPU
-        __CPUINITDATA
-#else
         __REFDATA
-#endif
 .align 4
 ENTRY(initial_code)
         .long i386_start_kernel
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 994dd6a4a2a0..071166a4ba83 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -519,16 +519,12 @@ static void c1e_idle(void)
                 if (!cpumask_test_cpu(cpu, c1e_mask)) {
                         cpumask_set_cpu(cpu, c1e_mask);
                         /*
-                         * Force broadcast so ACPI can not interfere. Needs
-                         * to run with interrupts enabled as it uses
-                         * smp_function_call.
+                         * Force broadcast so ACPI can not interfere.
                          */
-                        local_irq_enable();
                         clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
                                            &cpu);
                         printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
                                cpu);
-                        local_irq_disable();
                 }
                 clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 78d185d797de..9fc178255c04 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -46,11 +46,10 @@ PHDRS {
         data PT_LOAD FLAGS(7);          /* RWE */
 #ifdef CONFIG_X86_64
         user PT_LOAD FLAGS(7);          /* RWE */
-        data.init PT_LOAD FLAGS(7);     /* RWE */
 #ifdef CONFIG_SMP
         percpu PT_LOAD FLAGS(7);        /* RWE */
 #endif
-        data.init2 PT_LOAD FLAGS(7);    /* RWE */
+        init PT_LOAD FLAGS(7);          /* RWE */
 #endif
         note PT_NOTE FLAGS(0);          /* ___ */
 }
@@ -103,65 +102,43 @@ SECTIONS
                 __stop___ex_table = .;
         } :text = 0x9090
 
-        RODATA
+        RO_DATA(PAGE_SIZE)
 
         /* Data */
-        . = ALIGN(PAGE_SIZE);
         .data : AT(ADDR(.data) - LOAD_OFFSET) {
                 /* Start of data section */
                 _sdata = .;
-                DATA_DATA
-                CONSTRUCTORS
-        } :data
+
+                /* init_task */
+                INIT_TASK_DATA(THREAD_SIZE)
 
 #ifdef CONFIG_X86_32
-        /* 32 bit has nosave before _edata */
-        . = ALIGN(PAGE_SIZE);
-        .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-                __nosave_begin = .;
-                *(.data.nosave)
-                . = ALIGN(PAGE_SIZE);
-                __nosave_end = .;
-        }
+                /* 32 bit has nosave before _edata */
+                NOSAVE_DATA
 #endif
 
-        . = ALIGN(PAGE_SIZE);
-        .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-                *(.data.page_aligned)
+                PAGE_ALIGNED_DATA(PAGE_SIZE)
                 *(.data.idt)
-        }
 
-#ifdef CONFIG_X86_32
-        . = ALIGN(32);
-#else
-        . = ALIGN(PAGE_SIZE);
-        . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-#endif
-        .data.cacheline_aligned :
-                AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-                *(.data.cacheline_aligned)
-        }
+                CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
 
-        /* rarely changed data like cpu maps */
-#ifdef CONFIG_X86_32
-        . = ALIGN(32);
-#else
-        . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-#endif
-        .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-                *(.data.read_mostly)
+                DATA_DATA
+                CONSTRUCTORS
+
+                /* rarely changed data like cpu maps */
+                READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES)
 
                 /* End of data section */
                 _edata = .;
-        }
+        } :data
 
 #ifdef CONFIG_X86_64
 
 #define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
-                            SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
-                            SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
+                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
+                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
 
 #define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
 #define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
@@ -227,35 +204,29 @@ SECTIONS
 
 #endif /* CONFIG_X86_64 */
 
-        /* init_task */
-        . = ALIGN(THREAD_SIZE);
-        .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-                *(.data.init_task)
+        /* Init code and data - will be freed after init */
+        . = ALIGN(PAGE_SIZE);
+        .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
+                __init_begin = .; /* paired with __init_end */
         }
-#ifdef CONFIG_X86_64
-         :data.init
-#endif
 
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
         /*
-         * smp_locks might be freed after init
-         * start/end must be page aligned
+         * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
+         * output PHDR, so the next output section - .init.text - should
+         * start another segment - init.
          */
-        . = ALIGN(PAGE_SIZE);
-        .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
-                __smp_locks = .;
-                *(.smp_locks)
-                __smp_locks_end = .;
-                . = ALIGN(PAGE_SIZE);
-        }
+        PERCPU_VADDR(0, :percpu)
+#endif
 
-        /* Init code and data - will be freed after init */
-        . = ALIGN(PAGE_SIZE);
         .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-                __init_begin = .; /* paired with __init_end */
                 _sinittext = .;
                 INIT_TEXT
                 _einittext = .;
         }
+#ifdef CONFIG_X86_64
+        :init
+#endif
 
         .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
                 INIT_DATA
@@ -326,17 +297,7 @@ SECTIONS
         }
 #endif
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
-        /*
-         * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
-         * output PHDR, so the next output section - __data_nosave - should
-         * start another section data.init2.  Also, pda should be at the head of
-         * percpu area.  Preallocate it and define the percpu offset symbol
-         * so that it can be accessed as a percpu variable.
-         */
-        . = ALIGN(PAGE_SIZE);
-        PERCPU_VADDR(0, :percpu)
-#else
+#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
         PERCPU(PAGE_SIZE)
 #endif
 
@@ -347,15 +308,22 @@ SECTIONS
                 __init_end = .;
         }
 
+        /*
+         * smp_locks might be freed after init
+         * start/end must be page aligned
+         */
+        . = ALIGN(PAGE_SIZE);
+        .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+                __smp_locks = .;
+                *(.smp_locks)
+                __smp_locks_end = .;
+                . = ALIGN(PAGE_SIZE);
+        }
+
 #ifdef CONFIG_X86_64
         .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-                . = ALIGN(PAGE_SIZE);
-                __nosave_begin = .;
-                *(.data.nosave)
-                . = ALIGN(PAGE_SIZE);
-                __nosave_end = .;
-        } :data.init2
-        /* use another section data.init2, see PERCPU_VADDR() above */
+                NOSAVE_DATA
+        }
 #endif
 
         /* BSS */
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 6176fe8f29e0..ea56b8cbb6a6 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -796,7 +796,7 @@ int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
                 return ret;
 
 #else
-        reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
+        reserve_bootmem(phys, len, flags);
 #endif
 
         if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index e6718bb28065..352aa9e927e2 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -623,7 +623,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
                 return ret;
 
         if (flags != want_flags) {
-                if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) {
+                if (strict_prot ||
+                    !is_new_memtype_allowed(paddr, size, want_flags, flags)) {
                         free_memtype(paddr, paddr + size);
                         printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
                                 " for %Lx-%Lx, got %s\n",
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 172438f86a02..7410640db173 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -5,6 +5,10 @@ CFLAGS_REMOVE_time.o = -pg
 CFLAGS_REMOVE_irq.o = -pg
 endif
 
+# Make sure early boot has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_enlighten.o              := $(nostackp)
+
 obj-y           := enlighten.o setup.o multicalls.o mmu.o irq.o \
                         time.o xen-asm.o xen-asm_$(BITS).o \
                         grant-table.o suspend.o
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 0a1700a2be9c..eb33aaa8415d 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -215,6 +215,7 @@ static __init void xen_init_cpuid_mask(void)
                           (1 << X86_FEATURE_ACPI));  /* disable ACPI */
 
         ax = 1;
+        cx = 0;
         xen_cpuid(&ax, &bx, &cx, &dx);
 
         /* cpuid claims we support xsave; try enabling it to see what happens */
@@ -974,10 +975,6 @@ asmlinkage void __init xen_start_kernel(void)
 
         xen_domain_type = XEN_PV_DOMAIN;
 
-        BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
-
-        xen_setup_features();
-
         /* Install Xen paravirt ops */
         pv_info = xen_info;
         pv_init_ops = xen_init_ops;
@@ -986,8 +983,15 @@ asmlinkage void __init xen_start_kernel(void)
         pv_apic_ops = xen_apic_ops;
         pv_mmu_ops = xen_mmu_ops;
 
-        xen_init_irq_ops();
+#ifdef CONFIG_X86_64
+        /*
+         * Setup percpu state.  We only need to do this for 64-bit
+         * because 32-bit already has %fs set properly.
+         */
+        load_percpu_segment(0);
+#endif
 
+        xen_init_irq_ops();
         xen_init_cpuid_mask();
 
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -997,6 +1001,8 @@ asmlinkage void __init xen_start_kernel(void)
         set_xen_basic_apic_ops();
 #endif
 
+        xen_setup_features();
+
         if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
                 pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
                 pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
@@ -1004,13 +1010,6 @@ asmlinkage void __init xen_start_kernel(void)
 
         machine_ops = xen_machine_ops;
 
-#ifdef CONFIG_X86_64
-        /*
-         * Setup percpu state.  We only need to do this for 64-bit
-         * because 32-bit already has %fs set properly.
-         */
-        load_percpu_segment(0);
-#endif
         /*
          * The only reliable way to retain the initial address of the
          * percpu gdt_page is to remember it here, so we can go and
@@ -1061,6 +1060,7 @@ asmlinkage void __init xen_start_kernel(void)
         /* set up basic CPUID stuff */
         cpu_detect(&new_cpu_data);
         new_cpu_data.hard_math = 1;
+        new_cpu_data.wp_works_ok = 1;
         new_cpu_data.x86_capability[0] = cpuid_edx(1);
 #endif