Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, earlyprintk: Move mrst early console to platform/ and fix a typo
  x86, apbt: Setup affinity for apb timers acting as per-cpu timer
  ce4100: Add errata fixes for UART on CE4100
  x86: platform: Move iris to x86/platform where it belongs
  x86, mrst: Check platform_device_register() return code
  x86/platform: Add Eurobraille/Iris power off support
  x86, mrst: Add explanation for using 1960 as the year offset for vrtc
  x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
  x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
  x86: Ce4100: Add reboot_fixup() for CE4100
  ce4100: Add PCI register emulation for CE4100
  x86: Add CE4100 platform support
  x86: mrst: Set vRTC's IRQ to level trigger type
  x86: mrst: Add audio driver bindings
  rtc: Add drivers/rtc/rtc-mrst.c
  x86: mrst: Add vrtc driver which serves as a wall clock device
  x86: mrst: Add Moorestown specific reboot/shutdown support
  x86: mrst: Parse SFI timer table for all timer configs
  x86/mrst: Add SFI platform device parsing code

1 files changed, 132 insertions, 0 deletions

diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
new file mode 100644
index 000000000000..d2c0d51a7178
--- /dev/null
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -0,0 +1,132 @@
+/*
+ * Intel CE4100  platform specific setup code
+ *
+ * (C) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+
+static int ce4100_i8042_detect(void)
+{
+        return 0;
+}
+
+static void __init sdv_find_smp_config(void)
+{
+}
+
+#ifdef CONFIG_SERIAL_8250
+
+
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+        offset = offset << p->regshift;
+        return readl(p->membase + offset);
+}
+
+/*
+ * The UART Tx interrupts are not set under some conditions and therefore serial
+ * transmission hangs. This is a silicon issue and has not been root caused. The
+ * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT
+ * bit of LSR register in interrupt handler to see whether at least one of these
+ * two bits is set, if so then process the transmit request. If this workaround
+ * is not applied, then the serial transmission may hang. This workaround is for
+ * errata number 9 in Errata - B step.
+*/
+
+static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset)
+{
+        unsigned int ret, ier, lsr;
+
+        if (offset == UART_IIR) {
+                offset = offset << p->regshift;
+                ret = readl(p->membase + offset);
+                if (ret & UART_IIR_NO_INT) {
+                        /* see if the TX interrupt should have really set */
+                        ier = mem_serial_in(p, UART_IER);
+                        /* see if the UART's XMIT interrupt is enabled */
+                        if (ier & UART_IER_THRI) {
+                                lsr = mem_serial_in(p, UART_LSR);
+                                /* now check to see if the UART should be
+                                   generating an interrupt (but isn't) */
+                                if (lsr & (UART_LSR_THRE | UART_LSR_TEMT))
+                                        ret &= ~UART_IIR_NO_INT;
+                        }
+                }
+        } else
+                ret =  mem_serial_in(p, offset);
+        return ret;
+}
+
+static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value)
+{
+        offset = offset << p->regshift;
+        writel(value, p->membase + offset);
+}
+
+static void ce4100_serial_fixup(int port, struct uart_port *up,
+        unsigned short *capabilites)
+{
+#ifdef CONFIG_EARLY_PRINTK
+        /*
+         * Over ride the legacy port configuration that comes from
+         * asm/serial.h. Using the ioport driver then switching to the
+         * PCI memmaped driver hangs the IOAPIC
+         */
+        if (up->iotype !=  UPIO_MEM32) {
+                up->uartclk  = 14745600;
+                up->mapbase = 0xdffe0200;
+                set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
+                                up->mapbase & PAGE_MASK);
+                up->membase =
+                        (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+                up->membase += up->mapbase & ~PAGE_MASK;
+                up->iotype   = UPIO_MEM32;
+                up->regshift = 2;
+        }
+#endif
+        up->iobase = 0;
+        up->serial_in = ce4100_mem_serial_in;
+        up->serial_out = ce4100_mem_serial_out;
+
+        *capabilites |= (1 << 12);
+}
+
+static __init void sdv_serial_fixup(void)
+{
+        serial8250_set_isa_configurator(ce4100_serial_fixup);
+}
+
+#else
+static inline void sdv_serial_fixup(void);
+#endif
+
+static void __init sdv_arch_setup(void)
+{
+        sdv_serial_fixup();
+}
+
+/*
+ * CE4100 specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_ce4100_early_setup(void)
+{
+        x86_init.oem.arch_setup = sdv_arch_setup;
+        x86_platform.i8042_detect = ce4100_i8042_detect;
+        x86_init.resources.probe_roms = x86_init_noop;
+        x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+        x86_init.mpparse.find_smp_config = sdv_find_smp_config;
+}