x86: unify fault_32|64.c

Unify includes in moved fault.c.

Modify Makefiles to pick up unified file.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

1 files changed, 955 insertions, 0 deletions

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
new file mode 100644
index 000000000000..14a0c6e541de
--- /dev/null
+++ b/arch/x86/mm/fault.c
@@ -0,0 +1,955 @@
+/*
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Copyright (C) 2001,2002 Andi Kleen, SuSE Labs.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/vt_kern.h>              /* For unblank_screen() */
+#include <linux/compiler.h>
+#include <linux/highmem.h>
+#include <linux/bootmem.h>              /* for max_low_pfn */
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/kdebug.h>
+
+#include <asm/system.h>
+#include <asm/desc.h>
+#include <asm/segment.h>
+#include <asm/pgalloc.h>
+#include <asm/smp.h>
+#include <asm/tlbflush.h>
+#include <asm/proto.h>
+#include <asm-generic/sections.h>
+
+/*
+ * Page fault error code bits
+ *      bit 0 == 0 means no page found, 1 means protection fault
+ *      bit 1 == 0 means read, 1 means write
+ *      bit 2 == 0 means kernel, 1 means user-mode
+ *      bit 3 == 1 means use of reserved bit detected
+ *      bit 4 == 1 means fault was an instruction fetch
+ */
+#define PF_PROT         (1<<0)
+#define PF_WRITE        (1<<1)
+#define PF_USER         (1<<2)
+#define PF_RSVD         (1<<3)
+#define PF_INSTR        (1<<4)
+
+static inline int notify_page_fault(struct pt_regs *regs)
+{
+#ifdef CONFIG_KPROBES
+        int ret = 0;
+
+        /* kprobe_running() needs smp_processor_id() */
+#ifdef CONFIG_X86_32
+        if (!user_mode_vm(regs)) {
+#else
+        if (!user_mode(regs)) {
+#endif
+                preempt_disable();
+                if (kprobe_running() && kprobe_fault_handler(regs, 14))
+                        ret = 1;
+                preempt_enable();
+        }
+
+        return ret;
+#else
+        return 0;
+#endif
+}
+
+/*
+ * X86_32
+ * Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
+ * Check that here and ignore it.
+ *
+ * X86_64
+ * Sometimes the CPU reports invalid exceptions on prefetch.
+ * Check that here and ignore it.
+ *
+ * Opcode checker based on code by Richard Brunner
+ */
+static int is_prefetch(struct pt_regs *regs, unsigned long addr,
+                       unsigned long error_code)
+{
+        unsigned char *instr;
+        int scan_more = 1;
+        int prefetch = 0;
+        unsigned char *max_instr;
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_PAE
+        /* If it was a exec fault on NX page, ignore */
+        if (nx_enabled && (error_code & PF_INSTR))
+                return 0;
+# else
+        return 0;
+# endif
+#else /* CONFIG_X86_64 */
+        /* If it was a exec fault on NX page, ignore */
+        if (error_code & PF_INSTR)
+                return 0;
+#endif
+
+        instr = (unsigned char *)convert_ip_to_linear(current, regs);
+        max_instr = instr + 15;
+
+        if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE)
+                return 0;
+
+        while (scan_more && instr < max_instr) {
+                unsigned char opcode;
+                unsigned char instr_hi;
+                unsigned char instr_lo;
+
+                if (probe_kernel_address(instr, opcode))
+                        break;
+
+                instr_hi = opcode & 0xf0;
+                instr_lo = opcode & 0x0f;
+                instr++;
+
+                switch (instr_hi) {
+                case 0x20:
+                case 0x30:
+                        /*
+                         * Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
+                         * In X86_64 long mode, the CPU will signal invalid
+                         * opcode if some of these prefixes are present so
+                         * X86_64 will never get here anyway
+                         */
+                        scan_more = ((instr_lo & 7) == 0x6);
+                        break;
+#ifdef CONFIG_X86_64
+                case 0x40:
+                        /*
+                         * In AMD64 long mode 0x40..0x4F are valid REX prefixes
+                         * Need to figure out under what instruction mode the
+                         * instruction was issued. Could check the LDT for lm,
+                         * but for now it's good enough to assume that long
+                         * mode only uses well known segments or kernel.
+                         */
+                        scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS);
+                        break;
+#endif
+                case 0x60:
+                        /* 0x64 thru 0x67 are valid prefixes in all modes. */
+                        scan_more = (instr_lo & 0xC) == 0x4;
+                        break;
+                case 0xF0:
+                        /* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */
+                        scan_more = !instr_lo || (instr_lo>>1) == 1;
+                        break;
+                case 0x00:
+                        /* Prefetch instruction is 0x0F0D or 0x0F18 */
+                        scan_more = 0;
+
+                        if (probe_kernel_address(instr, opcode))
+                                break;
+                        prefetch = (instr_lo == 0xF) &&
+                                (opcode == 0x0D || opcode == 0x18);
+                        break;
+                default:
+                        scan_more = 0;
+                        break;
+                }
+        }
+        return prefetch;
+}
+
+static void force_sig_info_fault(int si_signo, int si_code,
+        unsigned long address, struct task_struct *tsk)
+{
+        siginfo_t info;
+
+        info.si_signo = si_signo;
+        info.si_errno = 0;
+        info.si_code = si_code;
+        info.si_addr = (void __user *)address;
+        force_sig_info(si_signo, &info, tsk);
+}
+
+#ifdef CONFIG_X86_64
+static int bad_address(void *p)
+{
+        unsigned long dummy;
+        return probe_kernel_address((unsigned long *)p, dummy);
+}
+#endif
+
+void dump_pagetable(unsigned long address)
+{
+#ifdef CONFIG_X86_32
+        __typeof__(pte_val(__pte(0))) page;
+
+        page = read_cr3();
+        page = ((__typeof__(page) *) __va(page))[address >> PGDIR_SHIFT];
+#ifdef CONFIG_X86_PAE
+        printk("*pdpt = %016Lx ", page);
+        if ((page >> PAGE_SHIFT) < max_low_pfn
+            && page & _PAGE_PRESENT) {
+                page &= PAGE_MASK;
+                page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT)
+                                                         & (PTRS_PER_PMD - 1)];
+                printk(KERN_CONT "*pde = %016Lx ", page);
+                page &= ~_PAGE_NX;
+        }
+#else
+        printk("*pde = %08lx ", page);
+#endif
+
+        /*
+         * We must not directly access the pte in the highpte
+         * case if the page table is located in highmem.
+         * And let's rather not kmap-atomic the pte, just in case
+         * it's allocated already.
+         */
+        if ((page >> PAGE_SHIFT) < max_low_pfn
+            && (page & _PAGE_PRESENT)
+            && !(page & _PAGE_PSE)) {
+                page &= PAGE_MASK;
+                page = ((__typeof__(page) *) __va(page))[(address >> PAGE_SHIFT)
+                                                         & (PTRS_PER_PTE - 1)];
+                printk("*pte = %0*Lx ", sizeof(page)*2, (u64)page);
+        }
+
+        printk("\n");
+#else /* CONFIG_X86_64 */
+        pgd_t *pgd;
+        pud_t *pud;
+        pmd_t *pmd;
+        pte_t *pte;
+
+        pgd = (pgd_t *)read_cr3();
+
+        pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK);
+        pgd += pgd_index(address);
+        if (bad_address(pgd)) goto bad;
+        printk("PGD %lx ", pgd_val(*pgd));
+        if (!pgd_present(*pgd)) goto ret;
+
+        pud = pud_offset(pgd, address);
+        if (bad_address(pud)) goto bad;
+        printk("PUD %lx ", pud_val(*pud));
+        if (!pud_present(*pud)) goto ret;
+
+        pmd = pmd_offset(pud, address);
+        if (bad_address(pmd)) goto bad;
+        printk("PMD %lx ", pmd_val(*pmd));
+        if (!pmd_present(*pmd) || pmd_large(*pmd)) goto ret;
+
+        pte = pte_offset_kernel(pmd, address);
+        if (bad_address(pte)) goto bad;
+        printk("PTE %lx", pte_val(*pte));
+ret:
+        printk("\n");
+        return;
+bad:
+        printk("BAD\n");
+#endif
+}
+
+#ifdef CONFIG_X86_32
+static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
+{
+        unsigned index = pgd_index(address);
+        pgd_t *pgd_k;
+        pud_t *pud, *pud_k;
+        pmd_t *pmd, *pmd_k;
+
+        pgd += index;
+        pgd_k = init_mm.pgd + index;
+
+        if (!pgd_present(*pgd_k))
+                return NULL;
+
+        /*
+         * set_pgd(pgd, *pgd_k); here would be useless on PAE
+         * and redundant with the set_pmd() on non-PAE. As would
+         * set_pud.
+         */
+
+        pud = pud_offset(pgd, address);
+        pud_k = pud_offset(pgd_k, address);
+        if (!pud_present(*pud_k))
+                return NULL;
+
+        pmd = pmd_offset(pud, address);
+        pmd_k = pmd_offset(pud_k, address);
+        if (!pmd_present(*pmd_k))
+                return NULL;
+        if (!pmd_present(*pmd)) {
+                set_pmd(pmd, *pmd_k);
+                arch_flush_lazy_mmu_mode();
+        } else
+                BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
+        return pmd_k;
+}
+#endif
+
+#ifdef CONFIG_X86_64
+static const char errata93_warning[] =
+KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
+KERN_ERR "******* Please consider a BIOS update.\n"
+KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+#endif
+
+/* Workaround for K8 erratum #93 & buggy BIOS.
+   BIOS SMM functions are required to use a specific workaround
+   to avoid corruption of the 64bit RIP register on C stepping K8.
+   A lot of BIOS that didn't get tested properly miss this.
+   The OS sees this as a page fault with the upper 32bits of RIP cleared.
+   Try to work around it here.
+   Note we only handle faults in kernel here.
+   Does nothing for X86_32
+ */
+static int is_errata93(struct pt_regs *regs, unsigned long address)
+{
+#ifdef CONFIG_X86_64
+        static int warned;
+        if (address != regs->ip)
+                return 0;
+        if ((address >> 32) != 0)
+                return 0;
+        address |= 0xffffffffUL << 32;
+        if ((address >= (u64)_stext && address <= (u64)_etext) ||
+            (address >= MODULES_VADDR && address <= MODULES_END)) {
+                if (!warned) {
+                        printk(errata93_warning);
+                        warned = 1;
+                }
+                regs->ip = address;
+                return 1;
+        }
+#endif
+        return 0;
+}
+
+/*
+ * Work around K8 erratum #100 K8 in compat mode occasionally jumps to illegal
+ * addresses >4GB.  We catch this in the page fault handler because these
+ * addresses are not reachable. Just detect this case and return.  Any code
+ * segment in LDT is compatibility mode.
+ */
+static int is_errata100(struct pt_regs *regs, unsigned long address)
+{
+#ifdef CONFIG_X86_64
+        if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) &&
+            (address >> 32))
+                return 1;
+#endif
+        return 0;
+}
+
+void do_invalid_op(struct pt_regs *, unsigned long);
+
+static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
+{
+#ifdef CONFIG_X86_F00F_BUG
+        unsigned long nr;
+        /*
+         * Pentium F0 0F C7 C8 bug workaround.
+         */
+        if (boot_cpu_data.f00f_bug) {
+                nr = (address - idt_descr.address) >> 3;
+
+                if (nr == 6) {
+                        do_invalid_op(regs, 0);
+                        return 1;
+                }
+        }
+#endif
+        return 0;
+}
+
+static void show_fault_oops(struct pt_regs *regs, unsigned long error_code,
+                            unsigned long address)
+{
+#ifdef CONFIG_X86_32
+        if (!oops_may_print())
+                return;
+
+#ifdef CONFIG_X86_PAE
+        if (error_code & PF_INSTR) {
+                int level;
+                pte_t *pte = lookup_address(address, &level);
+
+                if (pte && pte_present(*pte) && !pte_exec(*pte))
+                        printk(KERN_CRIT "kernel tried to execute "
+                                "NX-protected page - exploit attempt? "
+                                "(uid: %d)\n", current->uid);
+        }
+#endif
+        printk(KERN_ALERT "BUG: unable to handle kernel ");
+        if (address < PAGE_SIZE)
+                printk(KERN_CONT "NULL pointer dereference");
+        else
+                printk(KERN_CONT "paging request");
+        printk(KERN_CONT " at %08lx\n", address);
+
+        printk(KERN_ALERT "IP:");
+        printk_address(regs->ip, 1);
+        dump_pagetable(address);
+#else /* CONFIG_X86_64 */
+        printk(KERN_ALERT "BUG: unable to handle kernel ");
+        if (address < PAGE_SIZE)
+                printk(KERN_CONT "NULL pointer dereference");
+        else
+                printk(KERN_CONT "paging request");
+        printk(KERN_CONT " at %016lx\n", address);
+
+        printk(KERN_ALERT "IP:");
+        printk_address(regs->ip, 1);
+        dump_pagetable(address);
+#endif
+}
+
+#ifdef CONFIG_X86_64
+static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs,
+                                 unsigned long error_code)
+{
+        unsigned long flags = oops_begin();
+        struct task_struct *tsk;
+
+        printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
+               current->comm, address);
+        dump_pagetable(address);
+        tsk = current;
+        tsk->thread.cr2 = address;
+        tsk->thread.trap_no = 14;
+        tsk->thread.error_code = error_code;
+        if (__die("Bad pagetable", regs, error_code))
+                regs = NULL;
+        oops_end(flags, regs, SIGKILL);
+}
+#endif
+
+/*
+ * X86_32
+ * Handle a fault on the vmalloc or module mapping area
+ *
+ * X86_64
+ * Handle a fault on the vmalloc area
+ *
+ * This assumes no large pages in there.
+ */
+static int vmalloc_fault(unsigned long address)
+{
+#ifdef CONFIG_X86_32
+        unsigned long pgd_paddr;
+        pmd_t *pmd_k;
+        pte_t *pte_k;
+        /*
+         * Synchronize this task's top level page-table
+         * with the 'reference' page table.
+         *
+         * Do _not_ use "current" here. We might be inside
+         * an interrupt in the middle of a task switch..
+         */
+        pgd_paddr = read_cr3();
+        pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
+        if (!pmd_k)
+                return -1;
+        pte_k = pte_offset_kernel(pmd_k, address);
+        if (!pte_present(*pte_k))
+                return -1;
+        return 0;
+#else
+        pgd_t *pgd, *pgd_ref;
+        pud_t *pud, *pud_ref;
+        pmd_t *pmd, *pmd_ref;
+        pte_t *pte, *pte_ref;
+
+        /* Copy kernel mappings over when needed. This can also
+           happen within a race in page table update. In the later
+           case just flush. */
+
+        pgd = pgd_offset(current->mm ?: &init_mm, address);
+        pgd_ref = pgd_offset_k(address);
+        if (pgd_none(*pgd_ref))
+                return -1;
+        if (pgd_none(*pgd))
+                set_pgd(pgd, *pgd_ref);
+        else
+                BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
+
+        /* Below here mismatches are bugs because these lower tables
+           are shared */
+
+        pud = pud_offset(pgd, address);
+        pud_ref = pud_offset(pgd_ref, address);
+        if (pud_none(*pud_ref))
+                return -1;
+        if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
+                BUG();
+        pmd = pmd_offset(pud, address);
+        pmd_ref = pmd_offset(pud_ref, address);
+        if (pmd_none(*pmd_ref))
+                return -1;
+        if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
+                BUG();
+        pte_ref = pte_offset_kernel(pmd_ref, address);
+        if (!pte_present(*pte_ref))
+                return -1;
+        pte = pte_offset_kernel(pmd, address);
+        /* Don't use pte_page here, because the mappings can point
+           outside mem_map, and the NUMA hash lookup cannot handle
+           that. */
+        if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
+                BUG();
+        return 0;
+#endif
+}
+
+int show_unhandled_signals = 1;
+
+/*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ */
+#ifdef CONFIG_X86_64
+asmlinkage
+#endif
+void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
+{
+        struct task_struct *tsk;
+        struct mm_struct *mm;
+        struct vm_area_struct *vma;
+        unsigned long address;
+        int write, si_code;
+        int fault;
+#ifdef CONFIG_X86_64
+        unsigned long flags;
+#endif
+
+        /*
+         * We can fault from pretty much anywhere, with unknown IRQ state.
+         */
+        trace_hardirqs_fixup();
+
+        tsk = current;
+        mm = tsk->mm;
+        prefetchw(&mm->mmap_sem);
+
+        /* get the address */
+        address = read_cr2();
+
+        si_code = SEGV_MAPERR;
+
+        if (notify_page_fault(regs))
+                return;
+
+        /*
+         * We fault-in kernel-space virtual memory on-demand. The
+         * 'reference' page table is init_mm.pgd.
+         *
+         * NOTE! We MUST NOT take any locks for this case. We may
+         * be in an interrupt or a critical region, and should
+         * only copy the information from the master page table,
+         * nothing more.
+         *
+         * This verifies that the fault happens in kernel space
+         * (error_code & 4) == 0, and that the fault was not a
+         * protection error (error_code & 9) == 0.
+         */
+#ifdef CONFIG_X86_32
+        if (unlikely(address >= TASK_SIZE)) {
+                if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
+                    vmalloc_fault(address) >= 0)
+                        return;
+                /*
+                 * Don't take the mm semaphore here. If we fixup a prefetch
+                 * fault we could otherwise deadlock.
+                 */
+                goto bad_area_nosemaphore;
+        }
+
+        /* It's safe to allow irq's after cr2 has been saved and the vmalloc
+           fault has been handled. */
+        if (regs->flags & (X86_EFLAGS_IF|VM_MASK))
+                local_irq_enable();
+
+        /*
+         * If we're in an interrupt, have no user context or are running in an
+         * atomic region then we must not take the fault.
+         */
+        if (in_atomic() || !mm)
+                goto bad_area_nosemaphore;
+#else /* CONFIG_X86_64 */
+        if (unlikely(address >= TASK_SIZE64)) {
+                /*
+                 * Don't check for the module range here: its PML4
+                 * is always initialized because it's shared with the main
+                 * kernel text. Only vmalloc may need PML4 syncups.
+                 */
+                if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
+                      ((address >= VMALLOC_START && address < VMALLOC_END))) {
+                        if (vmalloc_fault(address) >= 0)
+                                return;
+                }
+                /*
+                 * Don't take the mm semaphore here. If we fixup a prefetch
+                 * fault we could otherwise deadlock.
+                 */
+                goto bad_area_nosemaphore;
+        }
+        if (likely(regs->flags & X86_EFLAGS_IF))
+                local_irq_enable();
+
+        if (unlikely(error_code & PF_RSVD))
+                pgtable_bad(address, regs, error_code);
+
+        /*
+         * If we're in an interrupt, have no user context or are running in an
+         * atomic region then we must not take the fault.
+         */
+        if (unlikely(in_atomic() || !mm))
+                goto bad_area_nosemaphore;
+
+        /*
+         * User-mode registers count as a user access even for any
+         * potential system fault or CPU buglet.
+         */
+        if (user_mode_vm(regs))
+                error_code |= PF_USER;
+again:
+#endif
+        /* When running in the kernel we expect faults to occur only to
+         * addresses in user space.  All other faults represent errors in the
+         * kernel and should generate an OOPS.  Unfortunately, in the case of an
+         * erroneous fault occurring in a code path which already holds mmap_sem
+         * we will deadlock attempting to validate the fault against the
+         * address space.  Luckily the kernel only validly references user
+         * space from well defined areas of code, which are listed in the
+         * exceptions table.
+         *
+         * As the vast majority of faults will be valid we will only perform
+         * the source reference check when there is a possibility of a deadlock.
+         * Attempt to lock the address space, if we cannot we then validate the
+         * source.  If this is invalid we can skip the address space check,
+         * thus avoiding the deadlock.
+         */
+        if (!down_read_trylock(&mm->mmap_sem)) {
+                if ((error_code & PF_USER) == 0 &&
+                    !search_exception_tables(regs->ip))
+                        goto bad_area_nosemaphore;
+                down_read(&mm->mmap_sem);
+        }
+
+        vma = find_vma(mm, address);
+        if (!vma)
+                goto bad_area;
+#ifdef CONFIG_X86_32
+        if (vma->vm_start <= address)
+#else
+        if (likely(vma->vm_start <= address))
+#endif
+                goto good_area;
+        if (!(vma->vm_flags & VM_GROWSDOWN))
+                goto bad_area;
+        if (error_code & PF_USER) {
+                /*
+                 * Accessing the stack below %sp is always a bug.
+                 * The large cushion allows instructions like enter
+                 * and pusha to work.  ("enter $65535,$31" pushes
+                 * 32 pointers and then decrements %sp by 65535.)
+                 */
+                if (address + 65536 + 32 * sizeof(unsigned long) < regs->sp)
+                        goto bad_area;
+        }
+        if (expand_stack(vma, address))
+                goto bad_area;
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+        si_code = SEGV_ACCERR;
+        write = 0;
+        switch (error_code & (PF_PROT|PF_WRITE)) {
+        default:        /* 3: write, present */
+                /* fall through */
+        case PF_WRITE:          /* write, not present */
+                if (!(vma->vm_flags & VM_WRITE))
+                        goto bad_area;
+                write++;
+                break;
+        case PF_PROT:           /* read, present */
+                goto bad_area;
+        case 0:                 /* read, not present */
+                if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
+                        goto bad_area;
+        }
+
+#ifdef CONFIG_X86_32
+survive:
+#endif
+        /*
+         * If for any reason at all we couldn't handle the fault,
+         * make sure we exit gracefully rather than endlessly redo
+         * the fault.
+         */
+        fault = handle_mm_fault(mm, vma, address, write);
+        if (unlikely(fault & VM_FAULT_ERROR)) {
+                if (fault & VM_FAULT_OOM)
+                        goto out_of_memory;
+                else if (fault & VM_FAULT_SIGBUS)
+                        goto do_sigbus;
+                BUG();
+        }
+        if (fault & VM_FAULT_MAJOR)
+                tsk->maj_flt++;
+        else
+                tsk->min_flt++;
+
+#ifdef CONFIG_X86_32
+        /*
+         * Did it hit the DOS screen memory VA from vm86 mode?
+         */
+        if (v8086_mode(regs)) {
+                unsigned long bit = (address - 0xA0000) >> PAGE_SHIFT;
+                if (bit < 32)
+                        tsk->thread.screen_bitmap |= 1 << bit;
+        }
+#endif
+        up_read(&mm->mmap_sem);
+        return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+        up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+        /* User mode accesses just cause a SIGSEGV */
+        if (error_code & PF_USER) {
+                /*
+                 * It's possible to have interrupts off here.
+                 */
+                local_irq_enable();
+
+                /*
+                 * Valid to do another page fault here because this one came
+                 * from user space.
+                 */
+                if (is_prefetch(regs, address, error_code))
+                        return;
+
+                if (is_errata100(regs, address))
+                        return;
+
+                if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
+                    printk_ratelimit()) {
+                        printk(
+#ifdef CONFIG_X86_32
+                        "%s%s[%d]: segfault at %lx ip %08lx sp %08lx error %lx",
+#else
+                        "%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx",
+#endif
+                        task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
+                        tsk->comm, task_pid_nr(tsk), address, regs->ip,
+                        regs->sp, error_code);
+                        print_vma_addr(" in ", regs->ip);
+                        printk("\n");
+                }
+
+                tsk->thread.cr2 = address;
+                /* Kernel addresses are always protection faults */
+                tsk->thread.error_code = error_code | (address >= TASK_SIZE);
+                tsk->thread.trap_no = 14;
+                force_sig_info_fault(SIGSEGV, si_code, address, tsk);
+                return;
+        }
+
+        if (is_f00f_bug(regs, address))
+                return;
+
+no_context:
+        /* Are we prepared to handle this kernel fault?  */
+        if (fixup_exception(regs))
+                return;
+
+        /*
+         * X86_32
+         * Valid to do another page fault here, because if this fault
+         * had been triggered by is_prefetch fixup_exception would have
+         * handled it.
+         *
+         * X86_64
+         * Hall of shame of CPU/BIOS bugs.
+         */
+        if (is_prefetch(regs, address, error_code))
+                return;
+
+        if (is_errata93(regs, address))
+                return;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+#ifdef CONFIG_X86_32
+        bust_spinlocks(1);
+
+        show_fault_oops(regs, error_code, address);
+
+        tsk->thread.cr2 = address;
+        tsk->thread.trap_no = 14;
+        tsk->thread.error_code = error_code;
+        die("Oops", regs, error_code);
+        bust_spinlocks(0);
+        do_exit(SIGKILL);
+#else /* CONFIG_X86_64 */
+        flags = oops_begin();
+
+        show_fault_oops(regs, error_code, address);
+
+        tsk->thread.cr2 = address;
+        tsk->thread.trap_no = 14;
+        tsk->thread.error_code = error_code;
+        if (__die("Oops", regs, error_code))
+                regs = NULL;
+        /* Executive summary in case the body of the oops scrolled away */
+        printk(KERN_EMERG "CR2: %016lx\n", address);
+        oops_end(flags, regs, SIGKILL);
+#endif
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+        up_read(&mm->mmap_sem);
+#ifdef CONFIG_X86_32
+        if (is_global_init(tsk)) {
+                yield();
+                down_read(&mm->mmap_sem);
+                goto survive;
+        }
+#else
+        if (is_global_init(current)) {
+                yield();
+                goto again;
+        }
+#endif
+        printk("VM: killing process %s\n", tsk->comm);
+        if (error_code & PF_USER)
+                do_group_exit(SIGKILL);
+        goto no_context;
+
+do_sigbus:
+        up_read(&mm->mmap_sem);
+
+        /* Kernel mode? Handle exceptions or die */
+        if (!(error_code & PF_USER))
+                goto no_context;
+#ifdef CONFIG_X86_32
+        /* User space => ok to do another page fault */
+        if (is_prefetch(regs, address, error_code))
+                return;
+#endif
+        tsk->thread.cr2 = address;
+        tsk->thread.error_code = error_code;
+        tsk->thread.trap_no = 14;
+        force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
+}
+
+#ifdef CONFIG_X86_64
+DEFINE_SPINLOCK(pgd_lock);
+LIST_HEAD(pgd_list);
+#endif
+
+void vmalloc_sync_all(void)
+{
+#ifdef CONFIG_X86_32
+        /*
+         * Note that races in the updates of insync and start aren't
+         * problematic: insync can only get set bits added, and updates to
+         * start are only improving performance (without affecting correctness
+         * if undone).
+         */
+        static DECLARE_BITMAP(insync, PTRS_PER_PGD);
+        static unsigned long start = TASK_SIZE;
+        unsigned long address;
+
+        if (SHARED_KERNEL_PMD)
+                return;
+
+        BUILD_BUG_ON(TASK_SIZE & ~PGDIR_MASK);
+        for (address = start; address >= TASK_SIZE; address += PGDIR_SIZE) {
+                if (!test_bit(pgd_index(address), insync)) {
+                        unsigned long flags;
+                        struct page *page;
+
+                        spin_lock_irqsave(&pgd_lock, flags);
+                        for (page = pgd_list; page; page =
+                                        (struct page *)page->index)
+                                if (!vmalloc_sync_one(page_address(page),
+                                                                address)) {
+                                        BUG_ON(page != pgd_list);
+                                        break;
+                                }
+                        spin_unlock_irqrestore(&pgd_lock, flags);
+                        if (!page)
+                                set_bit(pgd_index(address), insync);
+                }
+                if (address == start && test_bit(pgd_index(address), insync))
+                        start = address + PGDIR_SIZE;
+        }
+#else /* CONFIG_X86_64 */
+        /*
+         * Note that races in the updates of insync and start aren't
+         * problematic: insync can only get set bits added, and updates to
+         * start are only improving performance (without affecting correctness
+         * if undone).
+         */
+        static DECLARE_BITMAP(insync, PTRS_PER_PGD);
+        static unsigned long start = VMALLOC_START & PGDIR_MASK;
+        unsigned long address;
+
+        for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) {
+                if (!test_bit(pgd_index(address), insync)) {
+                        const pgd_t *pgd_ref = pgd_offset_k(address);
+                        struct page *page;
+
+                        if (pgd_none(*pgd_ref))
+                                continue;
+                        spin_lock(&pgd_lock);
+                        list_for_each_entry(page, &pgd_list, lru) {
+                                pgd_t *pgd;
+                                pgd = (pgd_t *)page_address(page) + pgd_index(address);
+                                if (pgd_none(*pgd))
+                                        set_pgd(pgd, *pgd_ref);
+                                else
+                                        BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
+                        }
+                        spin_unlock(&pgd_lock);
+                        set_bit(pgd_index(address), insync);
+                }
+                if (address == start)
+                        start = address + PGDIR_SIZE;
+        }
+        /* Check that there is no need to do the same for the modules area. */
+        BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
+        BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
+                                (__START_KERNEL & PGDIR_MASK)));
+#endif
+}