x64, x2apic/intr-remap: add x2apic support, including enabling interrupt-remapping

x2apic support.  Interrupt-remapping must be enabled before enabling x2apic,
this is needed to ensure that IO interrupts continue to work properly after the
cpu mode is changed to x2apic(which uses 32bit extended physical/cluster
apic id).

On systems where apicid's are > 255, BIOS can handover the control to OS in
x2apic mode. Or if the OS handover was in legacy xapic mode, check
if it is capable of x2apic mode. And if we succeed in enabling
Interrupt-remapping, then we can enable x2apic mode in the CPU.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 150 insertions, 4 deletions

diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index d5c06917b5b1..dd0501039f09 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -27,6 +27,7 @@
 #include <linux/clockchips.h>
 #include <linux/acpi_pmtmr.h>
 #include <linux/module.h>
+#include <linux/dmar.h>
 
 #include <asm/atomic.h>
 #include <asm/smp.h>
@@ -39,6 +40,7 @@
 #include <asm/proto.h>
 #include <asm/timex.h>
 #include <asm/apic.h>
+#include <asm/i8259.h>
 
 #include <mach_ipi.h>
 #include <mach_apic.h>
@@ -46,8 +48,12 @@
 static int disable_apic_timer __cpuinitdata;
 static int apic_calibrate_pmtmr __initdata;
 int disable_apic;
+int disable_x2apic;
 int x2apic;
 
+/* x2apic enabled before OS handover */
+int x2apic_preenabled;
+
 /* Local APIC timer works in C2 */
 int local_apic_timer_c2_ok;
 EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
@@ -896,6 +902,125 @@ void __cpuinit end_local_APIC_setup(void)
         apic_pm_activate();
 }
 
+void check_x2apic(void)
+{
+        int msr, msr2;
+
+        rdmsr(MSR_IA32_APICBASE, msr, msr2);
+
+        if (msr & X2APIC_ENABLE) {
+                printk("x2apic enabled by BIOS, switching to x2apic ops\n");
+                x2apic_preenabled = x2apic = 1;
+                apic_ops = &x2apic_ops;
+        }
+}
+
+void enable_x2apic(void)
+{
+        int msr, msr2;
+
+        rdmsr(MSR_IA32_APICBASE, msr, msr2);
+        if (!(msr & X2APIC_ENABLE)) {
+                printk("Enabling x2apic\n");
+                wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
+        }
+}
+
+void enable_IR_x2apic(void)
+{
+#ifdef CONFIG_INTR_REMAP
+        int ret;
+        unsigned long flags;
+
+        if (!cpu_has_x2apic)
+                return;
+
+        if (!x2apic_preenabled && disable_x2apic) {
+                printk(KERN_INFO
+                       "Skipped enabling x2apic and Interrupt-remapping "
+                       "because of nox2apic\n");
+                return;
+        }
+
+        if (x2apic_preenabled && disable_x2apic)
+                panic("Bios already enabled x2apic, can't enforce nox2apic");
+
+        if (!x2apic_preenabled && skip_ioapic_setup) {
+                printk(KERN_INFO
+                       "Skipped enabling x2apic and Interrupt-remapping "
+                       "because of skipping io-apic setup\n");
+                return;
+        }
+
+        ret = dmar_table_init();
+        if (ret) {
+                printk(KERN_INFO
+                       "dmar_table_init() failed with %d:\n", ret);
+
+                if (x2apic_preenabled)
+                        panic("x2apic enabled by bios. But IR enabling failed");
+                else
+                        printk(KERN_INFO
+                               "Not enabling x2apic,Intr-remapping\n");
+                return;
+        }
+
+        local_irq_save(flags);
+        mask_8259A();
+        save_mask_IO_APIC_setup();
+
+        ret = enable_intr_remapping(1);
+
+        if (ret && x2apic_preenabled) {
+                local_irq_restore(flags);
+                panic("x2apic enabled by bios. But IR enabling failed");
+        }
+
+        if (ret)
+                goto end;
+
+        if (!x2apic) {
+                x2apic = 1;
+                apic_ops = &x2apic_ops;
+                enable_x2apic();
+        }
+end:
+        if (ret)
+                /*
+                 * IR enabling failed
+                 */
+                restore_IO_APIC_setup();
+        else
+                reinit_intr_remapped_IO_APIC(x2apic_preenabled);
+
+        unmask_8259A();
+        local_irq_restore(flags);
+
+        if (!ret) {
+                if (!x2apic_preenabled)
+                        printk(KERN_INFO
+                               "Enabled x2apic and interrupt-remapping\n");
+                else
+                        printk(KERN_INFO
+                               "Enabled Interrupt-remapping\n");
+        } else
+                printk(KERN_ERR
+                       "Failed to enable Interrupt-remapping and x2apic\n");
+#else
+        if (!cpu_has_x2apic)
+                return;
+
+        if (x2apic_preenabled)
+                panic("x2apic enabled prior OS handover,"
+                      " enable CONFIG_INTR_REMAP");
+
+        printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping "
+               " and x2apic\n");
+#endif
+
+        return;
+}
+
 /*
  * Detect and enable local APICs on non-SMP boards.
  * Original code written by Keir Fraser.
@@ -943,6 +1068,11 @@ void __init early_init_lapic_mapping(void)
  */
 void __init init_apic_mappings(void)
 {
+        if (x2apic) {
+                boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+                return;
+        }
+
         /*
          * If no local APIC can be found then set up a fake all
          * zeroes page to simulate the local APIC and another
@@ -981,6 +1111,9 @@ int __init APIC_init_uniprocessor(void)
                 return -1;
         }
 
+        enable_IR_x2apic();
+        setup_apic_routing();
+
         verify_local_APIC();
 
         connect_bsp_APIC();
@@ -1238,10 +1371,14 @@ static int lapic_resume(struct sys_device *dev)
         maxlvt = lapic_get_maxlvt();
 
         local_irq_save(flags);
-        rdmsr(MSR_IA32_APICBASE, l, h);
-        l &= ~MSR_IA32_APICBASE_BASE;
-        l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-        wrmsr(MSR_IA32_APICBASE, l, h);
+        if (!x2apic) {
+                rdmsr(MSR_IA32_APICBASE, l, h);
+                l &= ~MSR_IA32_APICBASE_BASE;
+                l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+                wrmsr(MSR_IA32_APICBASE, l, h);
+        } else
+                enable_x2apic();
+
         apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
         apic_write(APIC_ID, apic_pm_state.apic_id);
         apic_write(APIC_DFR, apic_pm_state.apic_dfr);
@@ -1381,6 +1518,15 @@ __cpuinit int apic_is_clustered_box(void)
         return (clusters > 2);
 }
 
+static __init int setup_nox2apic(char *str)
+{
+        disable_x2apic = 1;
+        clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC);
+        return 0;
+}
+early_param("nox2apic", setup_nox2apic);
+
+
 /*
  * APIC command line parameters
  */