arch/tile: finish enabling support for TILE-Gx 64-bit chip

This support was partially present in the existing code (look for
"__tilegx__" ifdefs) but with this change you can build a working
kernel using the TILE-Gx toolchain and ARCH=tilegx.

Most of these files are new, generally adding a foo_64.c file
where previously there was just a foo_32.c file.

The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx,
using the existing SRCARCH mechanism in the top-level Makefile.

Changes to existing files:

- <asm/bitops.h> and <asm/bitops_32.h> changed to factor the
  include of <asm-generic/bitops/non-atomic.h> in the common header.

- <asm/compat.h> and arch/tile/kernel/compat.c changed to remove
  the "const" markers I had put on compat_sys_execve() when trying
  to match some recent similar changes to the non-compat execve.
  It turns out the compat version wasn't "upgraded" to use const.

- <asm/opcode-tile_64.h> and <asm/opcode_constants_64.h> were
  previously included accidentally, with the 32-bit contents.  Now
  they have the proper 64-bit contents.

Finally, I had to hack the existing hacky drivers/input/input-compat.h
to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64).

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [drivers/input]

1 files changed, 187 insertions, 0 deletions

diff --git a/arch/tile/mm/migrate_64.S b/arch/tile/mm/migrate_64.S
new file mode 100644
index 000000000000..e76fea688beb
--- /dev/null
+++ b/arch/tile/mm/migrate_64.S
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * This routine is a helper for migrating the home of a set of pages to
+ * a new cpu.  See the documentation in homecache.c for more information.
+ */
+
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
+#include <asm/types.h>
+#include <asm/asm-offsets.h>
+#include <hv/hypervisor.h>
+
+        .text
+
+/*
+ * First, some definitions that apply to all the code in the file.
+ */
+
+/* Locals (caller-save) */
+#define r_tmp           r10
+#define r_save_sp       r11
+
+/* What we save where in the stack frame; must include all callee-saves. */
+#define FRAME_SP        8
+#define FRAME_R30       16
+#define FRAME_R31       24
+#define FRAME_R32       32
+#define FRAME_R33       40
+#define FRAME_SIZE      48
+
+
+
+
+/*
+ * On entry:
+ *
+ *   r0 the new context PA to install (moved to r_context)
+ *   r1 PTE to use for context access (moved to r_access)
+ *   r2 ASID to use for new context (moved to r_asid)
+ *   r3 pointer to cpumask with just this cpu set in it (r_my_cpumask)
+ */
+
+/* Arguments (caller-save) */
+#define r_context_in    r0
+#define r_access_in     r1
+#define r_asid_in       r2
+#define r_my_cpumask    r3
+
+/* Locals (callee-save); must not be more than FRAME_xxx above. */
+#define r_save_ics      r30
+#define r_context       r31
+#define r_access        r32
+#define r_asid          r33
+
+/*
+ * Caller-save locals and frame constants are the same as
+ * for homecache_migrate_stack_and_flush.
+ */
+
+STD_ENTRY(flush_and_install_context)
+        /*
+         * Create a stack frame; we can't touch it once we flush the
+         * cache until we install the new page table and flush the TLB.
+         */
+        {
+         move r_save_sp, sp
+         st sp, lr
+         addi sp, sp, -FRAME_SIZE
+        }
+        addi r_tmp, sp, FRAME_SP
+        {
+         st r_tmp, r_save_sp
+         addi r_tmp, sp, FRAME_R30
+        }
+        {
+         st r_tmp, r30
+         addi r_tmp, sp, FRAME_R31
+        }
+        {
+         st r_tmp, r31
+         addi r_tmp, sp, FRAME_R32
+        }
+        {
+         st r_tmp, r32
+         addi r_tmp, sp, FRAME_R33
+        }
+        st r_tmp, r33
+
+        /* Move some arguments to callee-save registers. */
+        {
+         move r_context, r_context_in
+         move r_access, r_access_in
+        }
+        move r_asid, r_asid_in
+
+        /* Disable interrupts, since we can't use our stack. */
+        {
+         mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION
+         movei r_tmp, 1
+        }
+        mtspr INTERRUPT_CRITICAL_SECTION, r_tmp
+
+        /* First, flush our L2 cache. */
+        {
+         move r0, zero  /* cache_pa */
+         moveli r1, hw2_last(HV_FLUSH_EVICT_L2)  /* cache_control */
+        }
+        {
+         shl16insli r1, r1, hw1(HV_FLUSH_EVICT_L2)
+         move r2, r_my_cpumask  /* cache_cpumask */
+        }
+        {
+         shl16insli r1, r1, hw0(HV_FLUSH_EVICT_L2)
+         move r3, zero  /* tlb_va */
+        }
+        {
+         move r4, zero  /* tlb_length */
+         move r5, zero  /* tlb_pgsize */
+        }
+        {
+         move r6, zero  /* tlb_cpumask */
+         move r7, zero  /* asids */
+        }
+        {
+         move r8, zero  /* asidcount */
+         jal hv_flush_remote
+        }
+        bnez r0, 1f
+
+        /* Now install the new page table. */
+        {
+         move r0, r_context
+         move r1, r_access
+        }
+        {
+         move r2, r_asid
+         movei r3, HV_CTX_DIRECTIO
+        }
+        jal hv_install_context
+        bnez r0, 1f
+
+        /* Finally, flush the TLB. */
+        {
+         movei r0, 0   /* preserve_global */
+         jal hv_flush_all
+        }
+
+1:      /* Reset interrupts back how they were before. */
+        mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics
+
+        /* Restore the callee-saved registers and return. */
+        addli lr, sp, FRAME_SIZE
+        {
+         ld lr, lr
+         addli r_tmp, sp, FRAME_R30
+        }
+        {
+         ld r30, r_tmp
+         addli r_tmp, sp, FRAME_R31
+        }
+        {
+         ld r31, r_tmp
+         addli r_tmp, sp, FRAME_R32
+        }
+        {
+         ld r32, r_tmp
+         addli r_tmp, sp, FRAME_R33
+        }
+        {
+         ld r33, r_tmp
+         addi sp, sp, FRAME_SIZE
+        }
+        jrp lr
+        STD_ENDPROC(flush_and_install_context)