sparc64: Cleanups and corrections for arch/sparc64/Kconfig

Refer to chip as "SPARC" throughout.

Say 32-bit SPARC and 64-bit SPARC rather than mentioning specific
chips such like UltraSPARC, as appropriate.

Remove non-sense help text referring to things that will never appear
on a SPARC system, such as EISA busses etc.

Use "help" instead of "--help--"

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 17 insertions, 65 deletions

diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 8acc5cc38621..d3fa0f8fc613 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -1,9 +1,5 @@
-# $Id: config.in,v 1.158 2002/01/24 22:14:44 davem Exp $
-# For a description of the syntax of this configuration file,
-# see the Configure script.
-#
-
-mainmenu "Linux/UltraSPARC Kernel Configuration"
+# sparc64 configuration
+mainmenu "Linux Kernel Configuration for 64-bit SPARC"
 
 config SPARC
         bool
@@ -17,12 +13,6 @@ config SPARC64
         default y
         select HAVE_IDE
         select HAVE_LMB
-        help
-          SPARC is a family of RISC microprocessors designed and marketed by
-          Sun Microsystems, incorporated.  This port covers the newer 64-bit
-          UltraSPARC.  The UltraLinux project maintains both the SPARC32 and
-          SPARC64 ports; its web page is available at
-          <http://www.ultralinux.org/>.
 
 config GENERIC_TIME
         bool
@@ -97,7 +87,7 @@ config SPARC64_PAGE_SIZE_8KB
         help
           This lets you select the page size of the kernel.
 
-          8KB and 64KB work quite well, since Sparc ELF sections
+          8KB and 64KB work quite well, since SPARC ELF sections
           provide for up to 64KB alignment.
 
           Therefore, 512KB and 4MB are for expert hackers only.
@@ -138,7 +128,7 @@ config HOTPLUG_CPU
         bool "Support for hot-pluggable CPUs"
         depends on SMP
         select HOTPLUG
-        ---help---
+        help
           Say Y here to experiment with turning CPUs off and on.  CPUs
           can be controlled through /sys/devices/system/cpu/cpu#.
           Say N if you want to disable CPU hotplug.
@@ -155,23 +145,16 @@ source "kernel/time/Kconfig"
 
 config SMP
         bool "Symmetric multi-processing support"
-        ---help---
+        help
           This enables support for systems with more than one CPU. If you have
           a system with only one CPU, say N. If you have a system with more than
           one CPU, say Y.
 
           If you say N here, the kernel will run on single and multiprocessor
           machines, but will use only one CPU of a multiprocessor machine. If
-          you say Y here, the kernel will run on many, but not all,
-          singleprocessor machines. On a singleprocessor machine, the kernel
-          will run faster if you say N here.
-
-          People using multiprocessor machines who say Y here should also say
-          Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
-          Management" code will be disabled if you say Y here.
-
-          See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
-          available at <http://www.tldp.org/docs.html#howto>.
+          you say Y here, the kernel will run on single-processor machines.
+          On a single-processor machine, the kernel will run faster if you say
+          N here.
 
           If you don't know what to do here, say N.
 
@@ -284,50 +267,19 @@ source "mm/Kconfig"
 
 config ISA
         bool
-        help
-          Find out whether you have ISA slots on your motherboard.  ISA is the
-          name of a bus system, i.e. the way the CPU talks to the other stuff
-          inside your box.  Other bus systems are PCI, EISA, MicroChannel
-          (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-          newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
 config ISAPNP
         bool
-        help
-          Say Y here if you would like support for ISA Plug and Play devices.
-          Some information is in <file:Documentation/isapnp.txt>.
-
-          To compile this driver as a module, choose M here: the
-          module will be called isapnp.
-
-          If unsure, say Y.
 
 config EISA
         bool
-        ---help---
-          The Extended Industry Standard Architecture (EISA) bus was
-          developed as an open alternative to the IBM MicroChannel bus.
-
-          The EISA bus provided some of the features of the IBM MicroChannel
-          bus while maintaining backward compatibility with cards made for
-          the older ISA bus.  The EISA bus saw limited use between 1988 and
-          1995 when it was made obsolete by the PCI bus.
-
-          Say Y here if you are building a kernel for an EISA-based machine.
-
-          Otherwise, say N.
 
 config MCA
         bool
-        help
-          MicroChannel Architecture is found in some IBM PS/2 machines and
-          laptops.  It is a bus system similar to PCI or ISA. See
-          <file:Documentation/mca.txt> (and especially the web page given
-          there) before attempting to build an MCA bus kernel.
 
 config PCMCIA
         tristate
-        ---help---
+        help
           Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
           computer.  These are credit-card size devices such as network cards,
           modems or hard drives often used with laptops computers.  There are
@@ -369,10 +321,10 @@ config PCI
         bool "PCI support"
         select ARCH_SUPPORTS_MSI
         help
-          Find out whether you have a PCI motherboard. PCI is the name of a
-          bus system, i.e. the way the CPU talks to the other stuff inside
-          your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-          VESA. If you have PCI, say Y, otherwise N.
+          Find out whether your system includes a PCI bus. PCI is the name of
+          a bus system, i.e. the way the CPU talks to the other stuff inside
+          your box.  If you say Y here, the kernel will include drivers and
+          infrastructure code to support PCI bus devices.
 
 config PCI_DOMAINS
         def_bool PCI
@@ -397,9 +349,9 @@ menu "Executable file formats"
 source "fs/Kconfig.binfmt"
 
 config SPARC32_COMPAT
-        bool "Kernel support for Linux/Sparc 32bit binary compatibility"
+        bool "Kernel support for 32-bit SPARC binary compatibility"
         help
-          This allows you to run 32-bit binaries on your Ultra.
+          This allows you to run 32-bit binaries on your 64-bit SPARC system.
           Everybody wants this; say Y.
 
 config COMPAT
@@ -421,8 +373,8 @@ config SCHED_SMT
         default y
         help
           SMT scheduler support improves the CPU scheduler's decision making
-          when dealing with UltraSPARC cpus at a cost of slightly increased
-          overhead in some places. If unsure say N here.
+          when dealing with SPARC cpus at a cost of slightly increased overhead
+          in some places. If unsure say N here.
 
 config SCHED_MC
         bool "Multi-core scheduler support"