Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 393 insertions, 0 deletions

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
new file mode 100644
index 000000000000..237f922520fd
--- /dev/null
+++ b/arch/sparc/Kconfig
@@ -0,0 +1,393 @@
+# $Id: config.in,v 1.113 2002/01/24 22:14:44 davem Exp $
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux/SPARC Kernel Configuration"
+
+config MMU
+        bool
+        default y
+
+config UID16
+        bool
+        default y
+
+config HIGHMEM
+        bool
+        default y
+
+config GENERIC_ISA_DMA
+        bool
+        default y
+
+source "init/Kconfig"
+
+menu "General machine setup"
+
+config VT
+        bool
+        select INPUT
+        default y
+        ---help---
+          If you say Y here, you will get support for terminal devices with
+          display and keyboard devices. These are called "virtual" because you
+          can run several virtual terminals (also called virtual consoles) on
+          one physical terminal. This is rather useful, for example one
+          virtual terminal can collect system messages and warnings, another
+          one can be used for a text-mode user session, and a third could run
+          an X session, all in parallel. Switching between virtual terminals
+          is done with certain key combinations, usually Alt-<function key>.
+
+          The setterm command ("man setterm") can be used to change the
+          properties (such as colors or beeping) of a virtual terminal. The
+          man page console_codes(4) ("man console_codes") contains the special
+          character sequences that can be used to change those properties
+          directly. The fonts used on virtual terminals can be changed with
+          the setfont ("man setfont") command and the key bindings are defined
+          with the loadkeys ("man loadkeys") command.
+
+          You need at least one virtual terminal device in order to make use
+          of your keyboard and monitor. Therefore, only people configuring an
+          embedded system would want to say N here in order to save some
+          memory; the only way to log into such a system is then via a serial
+          or network connection.
+
+          If unsure, say Y, or else you won't be able to do much with your new
+          shiny Linux system :-)
+
+config VT_CONSOLE
+        bool
+        default y
+        ---help---
+          The system console is the device which receives all kernel messages
+          and warnings and which allows logins in single user mode. If you
+          answer Y here, a virtual terminal (the device used to interact with
+          a physical terminal) can be used as system console. This is the most
+          common mode of operations, so you should say Y here unless you want
+          the kernel messages be output only to a serial port (in which case
+          you should say Y to "Console on serial port", below).
+
+          If you do say Y here, by default the currently visible virtual
+          terminal (/dev/tty0) will be used as system console. You can change
+          that with a kernel command line option such as "console=tty3" which
+          would use the third virtual terminal as system console. (Try "man
+          bootparam" or see the documentation of your boot loader (lilo or
+          loadlin) about how to pass options to the kernel at boot time.)
+
+          If unsure, say Y.
+
+config HW_CONSOLE
+        bool
+        default y
+
+config SMP
+        bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
+        depends on BROKEN
+        ---help---
+          This enables support for systems with more than one CPU. If you have
+          a system with only one CPU, say N. If you have a system with more
+          than one CPU, say Y.
+
+          If you say N here, the kernel will run on single and multiprocessor
+          machines, but will use only one CPU of a multiprocessor machine. If
+          you say Y here, the kernel will run on many, but not all,
+          singleprocessor machines. On a singleprocessor machine, the kernel
+          will run faster if you say N here.
+
+          People using multiprocessor machines who say Y here should also say
+          Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+          Management" code will be disabled if you say Y here.
+
+          See also the <file:Documentation/smp.txt>,
+          <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+          <http://www.tldp.org/docs.html#howto>.
+
+          If you don't know what to do here, say N.
+
+config NR_CPUS
+        int "Maximum number of CPUs (2-32)"
+        range 2 32
+        depends on SMP
+        default "32"
+
+# Identify this as a Sparc32 build
+config SPARC32
+        bool
+        default y
+        help
+          SPARC is a family of RISC microprocessors designed and marketed by
+          Sun Microsystems, incorporated.  They are very widely found in Sun
+          workstations and clones. This port covers the original 32-bit SPARC;
+          it is old and stable and usually considered one of the "big three"
+          along with the Intel and Alpha ports.  The UltraLinux project
+          maintains both the SPARC32 and SPARC64 ports; its web page is
+          available at <http://www.ultralinux.org/>.
+
+# Global things across all Sun machines.
+config ISA
+        bool
+        help
+          ISA is found on Espresso only and is not supported currently.
+          Say N
+
+config EISA
+        bool
+        help
+          EISA is not supported.
+          Say N
+
+config MCA
+        bool
+        help
+          MCA is not supported.
+          Say N
+
+config PCMCIA
+        tristate
+        ---help---
+          Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+          computer.  These are credit-card size devices such as network cards,
+          modems or hard drives often used with laptops computers.  There are
+          actually two varieties of these cards: the older 16 bit PCMCIA cards
+          and the newer 32 bit CardBus cards.  If you want to use CardBus
+          cards, you need to say Y here and also to "CardBus support" below.
+
+          To use your PC-cards, you will need supporting software from David
+          Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+          for location).  Please also read the PCMCIA-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>.
+
+          To compile this driver as modules, choose M here: the
+          modules will be called pcmcia_core and ds.
+
+config SBUS
+        bool
+        default y
+
+config SBUSCHAR
+        bool
+        default y
+
+config SERIAL_CONSOLE
+        bool
+        default y
+        ---help---
+          If you say Y here, it will be possible to use a serial port as the
+          system console (the system console is the device which receives all
+          kernel messages and warnings and which allows logins in single user
+          mode). This could be useful if some terminal or printer is connected
+          to that serial port.
+
+          Even if you say Y here, the currently visible virtual console
+          (/dev/tty0) will still be used as the system console by default, but
+          you can alter that using a kernel command line option such as
+          "console=ttyS1". (Try "man bootparam" or see the documentation of
+          your boot loader (silo) about how to pass options to the kernel at
+          boot time.)
+
+          If you don't have a graphics card installed and you say Y here, the
+          kernel will automatically use the first serial line, /dev/ttyS0, as
+          system console.
+
+          If unsure, say N.
+
+config SUN_AUXIO
+        bool
+        default y
+
+config SUN_IO
+        bool
+        default y
+
+config RWSEM_GENERIC_SPINLOCK
+        bool
+        default y
+
+config RWSEM_XCHGADD_ALGORITHM
+        bool
+
+config GENERIC_CALIBRATE_DELAY
+        bool
+        default y
+
+config SUN_PM
+        bool
+        default y
+        help
+          Enable power management and CPU standby features on supported
+          SPARC platforms.
+
+config SUN4
+        bool "Support for SUN4 machines (disables SUN4[CDM] support)"
+        depends on !SMP
+        default n
+        help
+          Say Y here if, and only if, your machine is a sun4. Note that
+          a kernel compiled with this option will run only on sun4.
+          (And the current version will probably work only on sun4/330.)
+
+if !SUN4
+
+config PCI
+        bool "Support for PCI and PS/2 keyboard/mouse"
+        help
+          CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
+          CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
+          All of these platforms are extremely obscure, so say N if unsure.
+
+source "drivers/pci/Kconfig"
+
+endif
+
+config SUN_OPENPROMFS
+        tristate "Openprom tree appears in /proc/openprom"
+        help
+          If you say Y, the OpenPROM device tree will be available as a
+          virtual file system, which you can mount to /proc/openprom by "mount
+          -t openpromfs none /proc/openprom".
+
+          To compile the /proc/openprom support as a module, choose M here: the
+          module will be called openpromfs.
+
+          Only choose N if you know in advance that you will not need to modify
+          OpenPROM settings on the running system.
+
+source "fs/Kconfig.binfmt"
+
+config SUNOS_EMUL
+        bool "SunOS binary emulation"
+        help
+          This allows you to run most SunOS binaries.  If you want to do this,
+          say Y here and place appropriate files in /usr/gnemul/sunos. See
+          <http://www.ultralinux.org/faq.html> for more information.  If you
+          want to run SunOS binaries on an Ultra you must also say Y to
+          "Kernel support for 32-bit a.out binaries" above.
+
+source "drivers/parport/Kconfig"
+
+config PRINTER
+        tristate "Parallel printer support"
+        depends on PARPORT
+        ---help---
+          If you intend to attach a printer to the parallel port of your Linux
+          box (as opposed to using a serial printer; if the connector at the
+          printer has 9 or 25 holes ["female"], then it's serial), say Y.
+          Also read the Printing-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>.
+
+          It is possible to share one parallel port among several devices
+          (e.g. printer and ZIP drive) and it is safe to compile the
+          corresponding drivers into the kernel.  If you want to compile this
+          driver as a module however, choose M here and read
+          <file:Documentation/parport.txt>.  The module will be called lp.
+
+          If you have several parallel ports, you can specify which ports to
+          use with the "lp" kernel command line option.  (Try "man bootparam"
+          or see the documentation of your boot loader (silo) about how to pass
+          options to the kernel at boot time.)  The syntax of the "lp" command
+          line option can be found in <file:drivers/char/lp.c>.
+
+          If you have more than 8 printers, you need to increase the LP_NO
+          macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+endmenu
+
+source "drivers/base/Kconfig"
+
+source "drivers/video/Kconfig"
+
+source "drivers/mtd/Kconfig"
+
+source "drivers/serial/Kconfig"
+
+if !SUN4
+source "drivers/sbus/char/Kconfig"
+endif
+
+source "drivers/block/Kconfig"
+
+# Don't frighten a common SBus user
+if PCI
+
+source "drivers/ide/Kconfig"
+
+endif
+
+source "drivers/isdn/Kconfig"
+
+source "drivers/scsi/Kconfig"
+
+source "drivers/fc4/Kconfig"
+
+source "drivers/md/Kconfig"
+
+source "net/Kconfig"
+
+# This one must be before the filesystem configs. -DaveM
+
+menu "Unix98 PTY support"
+
+config UNIX98_PTYS
+        bool "Unix98 PTY support"
+        ---help---
+          A pseudo terminal (PTY) is a software device consisting of two
+          halves: a master and a slave. The slave device behaves identical to
+          a physical terminal; the master device is used by a process to
+          read data from and write data to the slave, thereby emulating a
+          terminal. Typical programs for the master side are telnet servers
+          and xterms.
+
+          Linux has traditionally used the BSD-like names /dev/ptyxx for
+          masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+          has a number of problems. The GNU C library glibc 2.1 and later,
+          however, supports the Unix98 naming standard: in order to acquire a
+          pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+          terminal is then made available to the process and the pseudo
+          terminal slave can be accessed as /dev/pts/<number>. What was
+          traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+          The entries in /dev/pts/ are created on the fly by a virtual
+          file system; therefore, if you say Y here you should say Y to
+          "/dev/pts file system for Unix98 PTYs" as well.
+
+          If you want to say Y here, you need to have the C library glibc 2.1
+          or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
+          Read the instructions in <file:Documentation/Changes> pertaining to
+          pseudo terminals. It's safe to say N.
+
+config UNIX98_PTY_COUNT
+        int "Maximum number of Unix98 PTYs in use (0-2048)"
+        depends on UNIX98_PTYS
+        default "256"
+        help
+          The maximum number of Unix98 PTYs that can be used at any one time.
+          The default is 256, and should be enough for desktop systems. Server
+          machines which support incoming telnet/rlogin/ssh connections and/or
+          serve several X terminals may want to increase this: every incoming
+          connection and every xterm uses up one PTY.
+
+          When not in use, each additional set of 256 PTYs occupy
+          approximately 8 KB of kernel memory on 32-bit architectures.
+
+endmenu
+
+source "drivers/input/Kconfig"
+
+source "fs/Kconfig"
+
+source "sound/Kconfig"
+
+source "drivers/usb/Kconfig"
+
+source "drivers/infiniband/Kconfig"
+
+source "drivers/char/watchdog/Kconfig"
+
+source "arch/sparc/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"