sh: mach-snapgear: Rip out superfluous PIO routines.

None of these PIO routines do anything other than basic error checking,
get rid of them and use the generic fallbacks.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

4 files changed, 11 insertions, 170 deletions

diff --git a/arch/sh/boards/mach-snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
index d2d2f4b6a502..bc92e34adbb0 100644
--- a/arch/sh/boards/mach-snapgear/Makefile
+++ b/arch/sh/boards/mach-snapgear/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the SnapGear specific parts of the kernel
 #
 
-obj-y    := setup.o io.o
+obj-y    := setup.o
diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
deleted file mode 100644
index 476650e42dbc..000000000000
--- a/arch/sh/boards/mach-snapgear/io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#ifdef CONFIG_SH_SECUREEDGE5410
-unsigned short secureedge5410_ioport;
-#endif
-
-static inline volatile __u16 *port2adr(unsigned int port)
-{
-        maybebadio((unsigned long)port);
-        return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char snapgear_inb(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned char *)port;
-        else
-                return (*port2adr(port)) & 0xff;
-}
-
-unsigned char snapgear_inb_p(unsigned long port)
-{
-        unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-        else
-                v = (*port2adr(port))&0xff;
-        ctrl_delay();
-        return v;
-}
-
-unsigned short snapgear_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-        else if (port >= 0x2000)
-                return *port2adr(port);
-        else
-                maybebadio(port);
-        return 0;
-}
-
-unsigned int snapgear_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-        else if (port >= 0x2000)
-                return *port2adr(port);
-        else
-                maybebadio(port);
-        return 0;
-}
-
-void snapgear_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-        else
-                *(port2adr(port)) = value;
-}
-
-void snapgear_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-        else
-                *(port2adr(port)) = value;
-        ctrl_delay();
-}
-
-void snapgear_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-        else if (port >= 0x2000)
-                *port2adr(port) = value;
-        else
-                maybebadio(port);
-}
-
-void snapgear_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-        else
-                maybebadio(port);
-}
-
-void snapgear_insl(unsigned long port, void *addr, unsigned long count)
-{
-        maybebadio(port);
-}
-
-void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-        maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
index 331745dee379..10eeea96a04b 100644
--- a/arch/sh/boards/mach-snapgear/setup.c
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/sh/boards/snapgear/setup.c
- *
  * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
  * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
  *
@@ -24,13 +22,14 @@
 #include <asm/io.h>
 #include <cpu/timer.h>
 
+unsigned short secureedge5410_ioport;
+
 /*
  * EraseConfig handling functions
  */
-
 static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 {
-        (void)__raw_readb(0xb8000000);  /* dummy read */
+        ctrl_delay();   /* dummy read */
 
         printk("SnapGear: erase switch interrupt!\n");
 
@@ -39,21 +38,22 @@ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 
 static int __init eraseconfig_init(void)
 {
+        unsigned int irq = evt2irq(0x240);
+
         printk("SnapGear: EraseConfig init\n");
+
         /* Setup "EraseConfig" switch on external IRQ 0 */
-        if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+        if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
                                 "Erase Config", NULL))
                 printk("SnapGear: failed to register IRQ%d for Reset witch\n",
-                                IRL0_IRQ);
+                                irq);
         else
                 printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
-                                IRL0_IRQ);
-        return(0);
+                                irq);
+        return 0;
 }
-
 module_init(eraseconfig_init);
 
-/****************************************************************************/
 /*
  * Initialize IRQ setting
  *
@@ -62,7 +62,6 @@ module_init(eraseconfig_init);
  * IRL2 = eth1
  * IRL3 = crypto
  */
-
 static void __init init_snapgear_IRQ(void)
 {
         printk("Setup SnapGear IRQ/IPR ...\n");
@@ -76,20 +75,5 @@ static void __init init_snapgear_IRQ(void)
 static struct sh_machine_vector mv_snapgear __initmv = {
         .mv_name                = "SnapGear SecureEdge5410",
         .mv_nr_irqs             = 72,
-
-        .mv_inb                 = snapgear_inb,
-        .mv_inw                 = snapgear_inw,
-        .mv_inl                 = snapgear_inl,
-        .mv_outb                = snapgear_outb,
-        .mv_outw                = snapgear_outw,
-        .mv_outl                = snapgear_outl,
-
-        .mv_inb_p               = snapgear_inb_p,
-        .mv_inw_p               = snapgear_inw,
-        .mv_inl_p               = snapgear_inl,
-        .mv_outb_p              = snapgear_outb_p,
-        .mv_outw_p              = snapgear_outw,
-        .mv_outl_p              = snapgear_outl,
-
         .mv_init_irq            = init_snapgear_IRQ,
 };
diff --git a/arch/sh/include/mach-common/mach/snapgear.h b/arch/sh/include/mach-common/mach/snapgear.h
index 042d95f51c4d..3653b9a4bacc 100644
--- a/arch/sh/include/mach-common/mach/snapgear.h
+++ b/arch/sh/include/mach-common/mach/snapgear.h
@@ -12,30 +12,9 @@
 #ifndef _ASM_SH_IO_SNAPGEAR_H
 #define _ASM_SH_IO_SNAPGEAR_H
 
-#if defined(CONFIG_CPU_SH4)
-/*
- * The external interrupt lines, these take up ints 0 - 15 inclusive
- * depending on the priority for the interrupt.  In fact the priority
- * is the interrupt :-)
- */
-
-#define IRL0_IRQ        2
-#define IRL0_PRIORITY   13
-
-#define IRL1_IRQ        5
-#define IRL1_PRIORITY   10
-
-#define IRL2_IRQ        8
-#define IRL2_PRIORITY   7
-
-#define IRL3_IRQ        11
-#define IRL3_PRIORITY   4
-#endif
-
 #define __IO_PREFIX     snapgear
 #include <asm/io_generic.h>
 
-#ifdef CONFIG_SH_SECUREEDGE5410
 /*
  * We need to remember what was written to the ioport as some bits
  * are shared with other functions and you cannot read back what was
@@ -66,6 +45,5 @@ extern unsigned short secureedge5410_ioport;
                         ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
 #define SECUREEDGE_READ_IOPORT() \
          ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-#endif
 
 #endif /* _ASM_SH_IO_SNAPGEAR_H */