Merge branch 'master'; commit 'v2.6.39-rc3' into next

20 files changed, 65 insertions, 32 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 9af3c8d0776b..4b89da248d17 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -23,8 +23,8 @@ config SUPERH
         select HAVE_SPARSE_IRQ
         select RTC_LIB
         select GENERIC_ATOMIC64
-        select GENERIC_HARDIRQS_NO_DEPRECATED
         select GENERIC_IRQ_SHOW
+        select ARCH_NO_SYSDEV_OPS
         help
           The SuperH is a RISC processor targeted for use in embedded systems
           and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 12fec72fec5f..1553d56cf4e0 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -82,7 +82,7 @@ config SH_NO_BSS_INIT
         help
           If running in painfully slow environments, such as an RTL
           simulation or from remote memory via SHdebug, where the memory
-          can already be gauranteed to ber zeroed on boot, say Y.
+          can already be guaranteed to ber zeroed on boot, say Y.
 
           For all other cases, say N. If this option seems perplexing, or
           you aren't sure, say N.
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index a9e33569ad38..fa2a208ec6cb 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
-#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
 #include <cpu/sh7757.h>
 #include <asm/sh_eth.h>
 #include <asm/heartbeat.h>
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 636d8318a72a..618bd566cf53 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -156,24 +156,34 @@ static struct platform_device nand_flash_device = {
 #define PORT_DRVCRA     0xA405018A
 #define PORT_DRVCRB     0xA405018C
 
+static int ap320_wvga_set_brightness(void *board_data, int brightness)
+{
+        if (brightness) {
+                gpio_set_value(GPIO_PTS3, 0);
+                __raw_writew(0x100, FPGA_BKLREG);
+        } else {
+                __raw_writew(0, FPGA_BKLREG);
+                gpio_set_value(GPIO_PTS3, 1);
+        }
+        
+        return 0;
+}
+
+static int ap320_wvga_get_brightness(void *board_data)
+{
+        return gpio_get_value(GPIO_PTS3);
+}
+
 static void ap320_wvga_power_on(void *board_data, struct fb_info *info)
 {
         msleep(100);
 
         /* ASD AP-320/325 LCD ON */
         __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
-
-        /* backlight */
-        gpio_set_value(GPIO_PTS3, 0);
-        __raw_writew(0x100, FPGA_BKLREG);
 }
 
 static void ap320_wvga_power_off(void *board_data)
 {
-        /* backlight */
-        __raw_writew(0, FPGA_BKLREG);
-        gpio_set_value(GPIO_PTS3, 1);
-
         /* ASD AP-320/325 LCD OFF */
         __raw_writew(0, FPGA_LCDREG);
 }
@@ -209,6 +219,12 @@ static struct sh_mobile_lcdc_info lcdc_info = {
                 .board_cfg = {
                         .display_on = ap320_wvga_power_on,
                         .display_off = ap320_wvga_power_off,
+                        .set_brightness = ap320_wvga_set_brightness,
+                        .get_brightness = ap320_wvga_get_brightness,
+                },
+                .bl_info = {
+                        .name = "sh_mobile_lcdc_bl",
+                        .max_brightness = 1,
                 },
         }
 };
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index 78cf2ab89d7a..f63d323f411f 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -51,7 +51,7 @@
  */
 #define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
 
-/* Return the hardware event's bit positon within the EMR/ESR */
+/* Return the hardware event's bit position within the EMR/ESR */
 #define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
 
 /*
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index fd4ff25f23b2..86a0d565aded 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -263,6 +263,18 @@ const static struct fb_videomode ecovec_dvi_modes[] = {
         },
 };
 
+static int ecovec24_set_brightness(void *board_data, int brightness)
+{
+        gpio_set_value(GPIO_PTR1, brightness);
+
+        return 0;
+}
+
+static int ecovec24_get_brightness(void *board_data)
+{
+        return gpio_get_value(GPIO_PTR1);
+}
+
 static struct sh_mobile_lcdc_info lcdc_info = {
         .ch[0] = {
                 .interface_type = RGB18,
@@ -273,6 +285,12 @@ static struct sh_mobile_lcdc_info lcdc_info = {
                         .height = 91,
                 },
                 .board_cfg = {
+                        .set_brightness = ecovec24_set_brightness,
+                        .get_brightness = ecovec24_get_brightness,
+                },
+                .bl_info = {
+                        .name = "sh_mobile_lcdc_bl",
+                        .max_brightness = 1,
                 },
         }
 };
@@ -936,7 +954,7 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd)
                 return;
         }
 
-        /* read MAC address frome EEPROM */
+        /* read MAC address from EEPROM */
         for (i = 0; i < sizeof(pd->mac_addr); i++) {
                 pd->mac_addr[i] = mac_read(a, 0x10 + i);
                 msleep(10);
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
index 94186cf079b6..f1147caebacf 100644
--- a/arch/sh/boards/mach-landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -23,7 +23,7 @@
 
 static void landisk_power_off(void)
 {
-        __raw_writeb(0x01, PA_SHUTDOWN);
+        __raw_writeb(0x01, PA_SHUTDOWN);
 }
 
 static struct resource cf_ide_resources[3];
@@ -85,7 +85,7 @@ device_initcall(landisk_devices_setup);
 
 static void __init landisk_setup(char **cmdline_p)
 {
-        /* LED ON */
+        /* LED ON */
         __raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
 
         printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
@@ -97,7 +97,6 @@ static void __init landisk_setup(char **cmdline_p)
  */
 static struct sh_machine_vector mv_landisk __initmv = {
         .mv_name = "LANDISK",
-        .mv_nr_irqs = 72,
         .mv_setup = landisk_setup,
         .mv_init_irq = init_landisk_IRQ,
 };
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
index 4983a4d20355..5ede38c330d3 100644
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ b/arch/sh/drivers/pci/pci-sh7751.h
@@ -61,7 +61,7 @@
   #define SH7751_PCICONF3_BIST7      0x80000000  /* Bist Supported */
   #define SH7751_PCICONF3_BIST6      0x40000000  /* Bist Executing */
   #define SH7751_PCICONF3_BIST3_0    0x0F000000  /* Bist Passed */
-  #define SH7751_PCICONF3_HD7        0x00800000  /* Single Funtion device */
+  #define SH7751_PCICONF3_HD7        0x00800000  /* Single Function device */
   #define SH7751_PCICONF3_HD6_0      0x007F0000  /* Configuration Layout */
   #define SH7751_PCICONF3_LAT        0x0000FF00  /* Latency Timer */
   #define SH7751_PCICONF3_CLS        0x000000FF  /* Cache Line Size */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index a09c77dd09db..194231cb5a70 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -84,7 +84,7 @@ int __devinit register_pci_controller(struct pci_channel *hose)
         hose_tail = &hose->next;
 
         /*
-         * Do not panic here but later - this might hapen before console init.
+         * Do not panic here but later - this might happen before console init.
          */
         if (!hose->io_map_base) {
                 printk(KERN_WARNING
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index c4e0b3d472b9..822d6084195b 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -186,7 +186,7 @@ typedef struct page *pgtable_t;
 /*
  * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
  * happily generate {ld/st}.q pairs, requiring us to have 8-byte
- * alignment to avoid traps. The kmalloc alignment is gauranteed by
+ * alignment to avoid traps. The kmalloc alignment is guaranteed by
  * virtue of L1_CACHE_BYTES, requiring this to only be special cased
  * for slab caches.
  */
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index b799fe71114c..0bce3d81569e 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -167,7 +167,7 @@ static inline unsigned long copy_ptea_attributes(unsigned long x)
 #endif
 
 /*
- * Mask of bits that are to be preserved accross pgprot changes.
+ * Mask of bits that are to be preserved across pgprot changes.
  */
 #define _PAGE_CHG_MASK \
         (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \
diff --git a/arch/sh/include/asm/unaligned-sh4a.h b/arch/sh/include/asm/unaligned-sh4a.h
index c48a9c3420da..95adc500cabc 100644
--- a/arch/sh/include/asm/unaligned-sh4a.h
+++ b/arch/sh/include/asm/unaligned-sh4a.h
@@ -9,7 +9,7 @@
  * struct.
  *
  * The same note as with the movli.l/movco.l pair applies here, as long
- * as the load is gauranteed to be inlined, nothing else will hook in to
+ * as the load is guaranteed to be inlined, nothing else will hook in to
  * r0 and we get the return value for free.
  *
  * NOTE: Due to the fact we require r0 encoding, care should be taken to
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
index 5d9d4d5154be..6ce944e33e59 100644
--- a/arch/sh/include/mach-common/mach/highlander.h
+++ b/arch/sh/include/mach-common/mach/highlander.h
@@ -24,7 +24,7 @@
 #define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
 #define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
 #define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extension Pin Polarity control */
 #define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
 #define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
 #define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
@@ -89,7 +89,7 @@
 #define PA_OBLED        (PA_BCR+0x0018) /* On Board LED control */
 #define PA_OBSW         (PA_BCR+0x001a) /* On Board Switch control */
 #define PA_AUDIOSEL     (PA_BCR+0x001c) /* Sound Interface Select control */
-#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extension Pin Polarity control */
 #define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
 #define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
 #define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
diff --git a/arch/sh/include/mach-common/mach/r2d.h b/arch/sh/include/mach-common/mach/r2d.h
index 0a800157b826..e04f75eaa153 100644
--- a/arch/sh/include/mach-common/mach/r2d.h
+++ b/arch/sh/include/mach-common/mach/r2d.h
@@ -18,18 +18,18 @@
 #define PA_DISPCTL      0xa4000008      /* Display Timing control */
 #define PA_SDMPOW       0xa400000a      /* SD Power control */
 #define PA_RTCCE        0xa400000c      /* RTC(9701) Enable control */
-#define PA_PCICD        0xa400000e      /* PCI Extention detect control */
+#define PA_PCICD        0xa400000e      /* PCI Extension detect control */
 #define PA_VOYAGERRTS   0xa4000020      /* VOYAGER Reset control */
 
 #define PA_R2D1_AXRST           0xa4000022      /* AX_LAN Reset control */
 #define PA_R2D1_CFRST           0xa4000024      /* CF Reset control */
 #define PA_R2D1_ADMRTS          0xa4000026      /* SD Reset control */
-#define PA_R2D1_EXTRST          0xa4000028      /* Extention Reset control */
+#define PA_R2D1_EXTRST          0xa4000028      /* Extension Reset control */
 #define PA_R2D1_CFCDINTCLR      0xa400002a      /* CF Insert Interrupt clear */
 
 #define PA_R2DPLUS_CFRST        0xa4000022      /* CF Reset control */
 #define PA_R2DPLUS_ADMRTS       0xa4000024      /* SD Reset control */
-#define PA_R2DPLUS_EXTRST       0xa4000026      /* Extention Reset control */
+#define PA_R2DPLUS_EXTRST       0xa4000026      /* Extension Reset control */
 #define PA_R2DPLUS_CFCDINTCLR   0xa4000028      /* CF Insert Interrupt clear */
 #define PA_R2DPLUS_KEYCTLCLR    0xa400002a      /* Key Interrupt clear */
 
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index dd0e0f211359..8f63a264a842 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -67,7 +67,7 @@ int __init __deprecated cpg_clk_init(void)
 }
 
 /*
- * Placeholder for compatability, until the lazy CPUs do this
+ * Placeholder for compatibility, until the lazy CPUs do this
  * on their own.
  */
 int __init __weak arch_clk_init(void)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 1656b8c91faf..beba32beb6d9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -648,7 +648,7 @@ static void __init sh7786_usb_setup(void)
          * The following settings are necessary
          * for using the USB modules.
          *
-         * see "USB Inital Settings" for detail
+         * see "USB Initial Settings" for detail
          */
         __raw_writel(USBINITVAL1, USBINITREG1);
         __raw_writel(USBINITVAL2, USBINITREG2);
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 64ea0b165399..91971103b62b 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -183,7 +183,7 @@ asmlinkage void do_softirq(void)
                 );
 
                 /*
-                 * Shouldnt happen, we returned above if in_interrupt():
+                 * Shouldn't happen, we returned above if in_interrupt():
                  */
                 WARN_ON_ONCE(softirq_count());
         }
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 4f267160c515..58bff45d1156 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -150,7 +150,7 @@ void __init check_for_initrd(void)
         }
 
         /*
-         * If we got this far inspite of the boot loader's best efforts
+         * If we got this far in spite of the boot loader's best efforts
          * to the contrary, assume we actually have a valid initrd and
          * fix up the root dev.
          */
diff --git a/arch/sh/lib64/copy_user_memcpy.S b/arch/sh/lib64/copy_user_memcpy.S
index 2a62816d2ddd..49aeabeba2c2 100644
--- a/arch/sh/lib64/copy_user_memcpy.S
+++ b/arch/sh/lib64/copy_user_memcpy.S
@@ -27,7 +27,7 @@
 ! 2.: When there are two or three bytes in the last word of an 11-or-more
 !     bytes memory chunk to b copied, the rest of the word can be read
 !     without side effects.
-!     This could be easily changed by increasing the minumum size of
+!     This could be easily changed by increasing the minimum size of
 !     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
 !     however, this would cost a few extra cyles on average.
 !     For SHmedia, the assumption is that any quadword can be read in its
diff --git a/arch/sh/lib64/memcpy.S b/arch/sh/lib64/memcpy.S
index dd300c372ce1..5d682e0ee24f 100644
--- a/arch/sh/lib64/memcpy.S
+++ b/arch/sh/lib64/memcpy.S
@@ -29,7 +29,7 @@
 ! 2.: When there are two or three bytes in the last word of an 11-or-more
 !     bytes memory chunk to b copied, the rest of the word can be read
 !     without side effects.
-!     This could be easily changed by increasing the minumum size of
+!     This could be easily changed by increasing the minimum size of
 !     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
 !     however, this would cost a few extra cyles on average.
 !     For SHmedia, the assumption is that any quadword can be read in its