sh: Remove old early serial console code V2

Now when the sh-sci driver can do early serial output,
get rid of the old duplicated code. This patch is V2 and
removes support for "earlyprintk=serial" together with
the following kconfig options:
CONFIG_EARLY_SCIF_CONSOLE
CONFIG_EARLY_SCIF_CONSOLE_PORT
CONFIG_EARLY_PRINTK

With this patch applied "earlyprintk=" support is always
built-in the SuperH kernel. For this to work the serial
driver must have early platform support and in the case
of sh-sci the serial console needs to be enabled:
CONFIG_SERIAL_SH_SCI_CONSOLE=y

So after enabling the SuperH SCI console kconfig option
you also need to point out port using the kernel command
line: "earlyprintk=sh-sci.N[,baudrate][,keep]"

Remember that clocks may be disabled by the boot loader
so you may have to do some board specific static clock
setup before earlyprintk will work on your platform.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

2 files changed, 1 insertions, 149 deletions

diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 0471a3eb25ed..0d587da1ef12 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -22,11 +22,10 @@ obj-y	:= debugtraps.o dma-nommu.o dumpstack.o 			\
 obj-y                           += cpu/
 obj-$(CONFIG_VSYSCALL)          += vsyscall/
 obj-$(CONFIG_SMP)               += smp.o
-obj-$(CONFIG_SH_STANDARD_BIOS)  += sh_bios.o
+obj-$(CONFIG_SH_STANDARD_BIOS)  += sh_bios.o early_printk.o
 obj-$(CONFIG_KGDB)              += kgdb.o
 obj-$(CONFIG_SH_CPU_FREQ)       += cpufreq.o
 obj-$(CONFIG_MODULES)           += sh_ksyms_$(BITS).o module.o
-obj-$(CONFIG_EARLY_PRINTK)      += early_printk.o
 obj-$(CONFIG_KEXEC)             += machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)        += crash_dump.o
 obj-$(CONFIG_STACKTRACE)        += stacktrace.o
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index fe7dc3fe1db1..f8bb50c6e050 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -15,7 +15,6 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 
-#ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
 
 /*
@@ -57,140 +56,7 @@ static struct console bios_console = {
         .flags          = CON_PRINTBUFFER,
         .index          = -1,
 };
-#endif
 
-#ifdef CONFIG_EARLY_SCIF_CONSOLE
-#include <linux/serial_core.h>
-#include "../../../drivers/serial/sh-sci.h"
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define EPK_SCSMR_VALUE 0x000
-#define EPK_SCBRR_VALUE 0x00C
-#define EPK_FIFO_SIZE 64
-#define EPK_FIFO_BITS (0x7f00 >> 8)
-#else
-#define EPK_FIFO_SIZE 16
-#define EPK_FIFO_BITS (0x1f00 >> 8)
-#endif
-
-static struct uart_port scif_port = {
-        .type           = PORT_SCIF,
-        .mapbase        = CONFIG_EARLY_SCIF_CONSOLE_PORT,
-        .membase        = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT,
-};
-
-static void scif_sercon_putc(int c)
-{
-        while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE))
-                ;
-
-        sci_in(&scif_port, SCxSR);
-        sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40));
-        sci_out(&scif_port, SCxTDR, c);
-
-        while ((sci_in(&scif_port, SCxSR) & 0x40) == 0)
-                ;
-
-        if (c == '\n')
-                scif_sercon_putc('\r');
-}
-
-static void scif_sercon_write(struct console *con, const char *s,
-                              unsigned count)
-{
-        while (count-- > 0)
-                scif_sercon_putc(*s++);
-}
-
-static int __init scif_sercon_setup(struct console *con, char *options)
-{
-        con->cflag = CREAD | HUPCL | CLOCAL | B115200 | CS8;
-
-        return 0;
-}
-
-static struct console scif_console = {
-        .name           = "sercon",
-        .write          = scif_sercon_write,
-        .setup          = scif_sercon_setup,
-        .flags          = CON_PRINTBUFFER,
-        .index          = -1,
-};
-
-#if !defined(CONFIG_SH_STANDARD_BIOS)
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-static void scif_sercon_init(char *s)
-{
-        sci_out(&scif_port, SCSCR, 0x0000);     /* clear TE and RE */
-        sci_out(&scif_port, SCFCR, 0x4006);     /* reset */
-        sci_out(&scif_port, SCSCR, 0x0000);     /* select internal clock */
-        sci_out(&scif_port, SCSMR, EPK_SCSMR_VALUE);
-        sci_out(&scif_port, SCBRR, EPK_SCBRR_VALUE);
-
-        mdelay(1);      /* wait 1-bit time */
-
-        sci_out(&scif_port, SCFCR, 0x0030);     /* TTRG=b'11 */
-        sci_out(&scif_port, SCSCR, 0x0030);     /* TE, RE */
-}
-#elif defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
-#define DEFAULT_BAUD 115200
-/*
- * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
- * devices that aren't using sh-ipl+g.
- */
-static void scif_sercon_init(char *s)
-{
-        struct uart_port *port = &scif_port;
-        unsigned baud = DEFAULT_BAUD;
-        unsigned int status;
-        char *e;
-
-        if (*s == ',')
-                ++s;
-
-        if (*s) {
-                /* ignore ioport/device name */
-                s += strcspn(s, ",");
-                if (*s == ',')
-                        s++;
-        }
-
-        if (*s) {
-                baud = simple_strtoul(s, &e, 0);
-                if (baud == 0 || s == e)
-                        baud = DEFAULT_BAUD;
-        }
-
-        do {
-                status = sci_in(port, SCxSR);
-        } while (!(status & SCxSR_TEND(port)));
-
-        sci_out(port, SCSCR, 0);         /* TE=0, RE=0 */
-        sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
-        sci_out(port, SCSMR, 0);
-
-        /* Set baud rate */
-        sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) /
-                (32 * baud) - 1);
-        udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
-
-        sci_out(port, SCSPTR, 0);
-        sci_out(port, SCxSR, 0x60);
-        sci_out(port, SCLSR, 0);
-
-        sci_out(port, SCFCR, 0);
-        sci_out(port, SCSCR, 0x30);      /* TE=1, RE=1 */
-}
-#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
-#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */
-#endif /* CONFIG_EARLY_SCIF_CONSOLE */
-
-/*
- * Setup a default console, if more than one is compiled in, rely on the
- * earlyprintk= parsing to give priority.
- */
 static struct console *early_console;
 
 static int __init setup_early_printk(char *buf)
@@ -203,21 +69,8 @@ static int __init setup_early_printk(char *buf)
         if (strstr(buf, "keep"))
                 keep_early = 1;
 
-#ifdef CONFIG_SH_STANDARD_BIOS
         if (!strncmp(buf, "bios", 4))
                 early_console = &bios_console;
-#endif
-#if defined(CONFIG_EARLY_SCIF_CONSOLE)
-        if (!strncmp(buf, "serial", 6)) {
-                early_console = &scif_console;
-
-#if !defined(CONFIG_SH_STANDARD_BIOS)
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
-                scif_sercon_init(buf + 6);
-#endif
-#endif
-        }
-#endif
 
         if (likely(early_console)) {
                 if (keep_early)