sh: migrate to arch/sh/include/

This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac.

Most of the moving about was done with Sam's directions at:

http://marc.info/?l=linux-sh&m=121724823706062&w=2

with subsequent hacking and fixups entirely my fault.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 55 insertions, 0 deletions

diff --git a/arch/sh/include/asm/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h
new file mode 100644
index 000000000000..1ce27d5c7491
--- /dev/null
+++ b/arch/sh/include/asm/sh7785lcr.h
@@ -0,0 +1,55 @@
+#ifndef __ASM_SH_RENESAS_SH7785LCR_H
+#define __ASM_SH_RENESAS_SH7785LCR_H
+
+/*
+ * This board has 2 physical memory maps.
+ * It can be changed with DIP switch(S2-5).
+ *
+ * phys address                 | S2-5 = OFF    | S2-5 = ON
+ * -----------------------------+---------------+---------------
+ * 0x00000000 - 0x03ffffff(CS0) | NOR Flash     | NOR Flash
+ * 0x04000000 - 0x05ffffff(CS1) | PLD           | PLD
+ * 0x06000000 - 0x07ffffff(CS1) | reserved      | I2C
+ * 0x08000000 - 0x0bffffff(CS2) | USB           | DDR SDRAM
+ * 0x0c000000 - 0x0fffffff(CS3) | SD            | DDR SDRAM
+ * 0x10000000 - 0x13ffffff(CS4) | SM107         | SM107
+ * 0x14000000 - 0x17ffffff(CS5) | I2C           | USB
+ * 0x18000000 - 0x1bffffff(CS6) | reserved      | SD
+ * 0x40000000 - 0x5fffffff      | DDR SDRAM     | (cannot use)
+ *
+ */
+
+#define NOR_FLASH_ADDR          0x00000000
+#define NOR_FLASH_SIZE          0x04000000
+
+#define PLD_BASE_ADDR           0x04000000
+#define PLD_PCICR               (PLD_BASE_ADDR + 0x00)
+#define PLD_LCD_BK_CONTR        (PLD_BASE_ADDR + 0x02)
+#define PLD_LOCALCR             (PLD_BASE_ADDR + 0x04)
+#define PLD_POFCR               (PLD_BASE_ADDR + 0x06)
+#define PLD_LEDCR               (PLD_BASE_ADDR + 0x08)
+#define PLD_SWSR                (PLD_BASE_ADDR + 0x0a)
+#define PLD_VERSR               (PLD_BASE_ADDR + 0x0c)
+#define PLD_MMSR                (PLD_BASE_ADDR + 0x0e)
+
+#define SM107_MEM_ADDR          0x10000000
+#define SM107_MEM_SIZE          0x00e00000
+#define SM107_REG_ADDR          0x13e00000
+#define SM107_REG_SIZE          0x00200000
+
+#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
+#define R8A66597_ADDR           0x14000000      /* USB */
+#define CG200_ADDR              0x18000000      /* SD */
+#define PCA9564_ADDR            0x06000000      /* I2C */
+#else
+#define R8A66597_ADDR           0x08000000
+#define CG200_ADDR              0x0c000000
+#define PCA9564_ADDR            0x14000000
+#endif
+
+#define R8A66597_SIZE           0x00000100
+#define CG200_SIZE              0x00010000
+#define PCA9564_SIZE            0x00000100
+
+#endif  /* __ASM_SH_RENESAS_SH7785LCR_H */
+